Search Results

Search found 947 results on 38 pages for 'radeon'.

Page 32/38 | < Previous Page | 28 29 30 31 32 33 34 35 36 37 38  | Next Page >

• Asus A8V overcurrent

  - by user139710

  This is not as much as a question as it is a note to those out there that upgrade their motherboards with better processors and the like. Here's my story. Recently I upgraded my processor. System specifications: • Asus A8V Deluxe • 4GB RAM • ATI Radeon 3870 AGP graphics card (I believe that's it) Anyway, I decided to put a dual core Opteron 180 in this rig, but the problem was that I needed to update the BIOS to V-1017, and not knowing the consequences, I went up to the Asus site and got the newest, the latest and the greatest, 1018.002 thinking that it was the best for this board, however it wasn't. I used the Asus EXFlash, which makes life a lot easier, flashed the BIOS and all of a sudden I start getting this message: USB overcurrent protection, system shutting down in 15 seconds to protect your system. WELL SHIT... This is a new one on me... I read the blogs, all the posts on this thing, and did all that everyone else did to correct the problem, but nothing helped. So i decided to start from square one, went back to Asus and looked at the BIOS download... OMG... IT WAS A BETA. So, I downloaded the update that was suggested 1017< and installed it and wouldn't you know, it took care of the problem, no more USB overcurrent protection, no more crashing. I write this today to let you all know about this, just in case you have an issue such as this. Well there you all go. Fly safe and eat your vegetables.

  Read the article

• Ubuntu 12.04 LTX Install Problems (See post for system build details.)

  - by Lokitez

  This is my first ever attempt at working with Ubuntu. I have only ever installed Windows in the past and that may be the problem. I purchased all new hardware this week and I would really like to give Ubuntu a chance (especially since I don't want to buy another Windows license). First, the hardware: AMD FX-8150 Zambezi 3.6GHz Socket AM3+ 125W Eight-Core Desktop Processor ASUS Crosshair V Formula AM3+ AMD 990FX SATA 6Gb/s USB 3.0 ATX AMD Gaming Motherboard SAMSUNG 830 Series MZ-7PC128D/AM 2.5" 128GB SATA III MLC Internal Solid State Drive (SSD) - This is my intended boot drive. Western Digital VelociRaptor WD5000HHTZ 500GB 10000 RPM SATA 6.0Gb/s 3.5" Internal Hard Drive - This is a backup drive that I have installed Windows Vista on until I can get Ubuntu to work. G.SKILL Ripjaws X Series 16GB (2 x 8GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) ASUS HD7850-DC2-2GD5 Radeon HD 7850 2GB 256-bit GDDR5 PCI Express 3.0 x16 I have downloaded and tried to install both Ubuntu 64 bit and Kubuntu 64 bit (both 12.04). Both will always fail to copy a file during install or otherwise lockup during install to the SSD. I have burned two copies of the Ubuntu 12.04 and had the install fail with both. I have installed Vista onto the HDD. Is it possible to mount the Ubuntu file into

  Read the article

• External Full HD monitor and Virtual Desktop Size

  - by Stefan

  I have two FullHD monitors attached to my ATI graphics card [2]. The resolution of both of them is detected properly without any modifications to /etc/X11/xorg.conf. I can run both of them in clone mode. However, when I try to run them next to each other, I got the following error: The selected configuration for displays could not be applied. If tried to fix this according to [1]. My xorg.conf now looks like this: Section "Module" Load "glx" EndSection Section "Screen" Identifier "Default Screen" DefaultDepth 24 SubSection "Display" # The 1088 is the smallest multiple of 32 >= 1088 # see manpages Virtual 1920 1088 EndSubSection EndSection This does not seem to be parsed properly. After restarting X, I cannot set resolutions beyond 1600 or so any more. /var/log/Xorg.0.log gives: [ 15.676] (II) fglrx(0): Not using mode "1920x1080" (width too large for virtual size) [ 15.676] (II) fglrx(0): Not using mode "1680x1050" (width too large for virtual size) Are my modifications syntactically incorrect? According to the man page, it should be fine. Any ideas? OS: Ubuntu 11.10 64bit [1] http://askubuntu.com/a/75546/5023 [2] 01:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5700 Series]

  Read the article

• How can I extend the desktop onto an external monitor/projector?

  - by hellocatfood

  I've plugged in a projector into my laptop and I'm attempting to extend the desktop onto it (so that I can run a full screen app on the projector and have the controls on my laptop). I'm able to mirror the screens effectively (it does this by default) but I can't extend it. When I untick "Mirror screens" and press apply it asks me to log out and then back in again but it goes back to mirroring the screens. I'm able to extend desktop on to my external monitor at home, just not this projector. Is there a manual way or other way to do this other that through Monitors setting? My computer model is Dell Studio 1555: Pentium Dual Core T4300(2.1GHz,800MHz,1MB), 4096MB 800MHz DDR2 Dual Channel, 512 MB ATI Mobility RADEON HD 4570 using the ATI proprietary driver. My screen resolution is 1366x768 (16:9) The projector that it wont connect properly is a Hitachi CPX3. That page specifies that it's especially designed for projectors that use 16:10 aspect ratio, but considering my external monitor at home uses 4:3 should the differences in aspect ratio matter or be causing this error?

  Read the article

• Cannot boot: FGLRX 8.780 + Kernel 2.6.35-25

  - by pluc

  The situation before this all happened is pretty standard. I have a HP Pavillion dv5 laptop with an ATI Mobility Radeon 4200 series. It always worked fine with Ubuntu for as long as I can remember. However, at one point, something happened and truly made a majestic mess of things. It might've been extra repos I enabled with Ubuntu Tweak - I do not know. But something made it so that my system would not boot any longer. And when I say "won't boot", this is what I mean: - Durning a normal bootup, any entries (except Windows) selected with GRUB (or BURG, not even sure which one I'm using anymore) will spawn the Ubuntu loading screen - then try to start X (or GDM) 5 times. The screen goes to dark, black and back to the Ubuntu loading screen. Then it just stays there until I spawn another TTY. I have no idea what is happening or why. There are no errors in my logs, and I'm truly at a loss here. I've linked three files: Xorg.0.log, the output of dmesg and the GDM log: Xorg.0.log: http://ubuntu.pastebin.com/tpVKc2tc dmesg: ubuntu.pastebin.com/Nd5aYj45 gdm's :0.log: couldn't post due to lack of points :( Let me know if any of you more knowledgeable folks can restore some sanity in my life. Any help is greatly apreciated.

  Read the article

• Intermittent sound

  - by ej159

  The sound on my machine (Medion Akoya S5610) works intermittently. If I reboot enough times I do get sound. This happened before I upgraded, when running Oneiric too. I have fiddled around with alsa-base.conf, putting in different values for model in options snd-hda-intel model=but still the issue persists (although I get the impression that I am more like to have sound on the next reboot if I have edited that file although I can't be sure of this). Adding index=0 does not help the situation either. I have been thinking that this problem could be related some how to the order that driver modules are loaded. The snd-hda-intel module is also used for the sound card (ALC888) in my graphics card. Could it be that these are some how competing? If so, how do I add a preference when they are using the same module? This is the result of lspci -nn | grep Audio (when sound was not working): 00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03) 01:00.1 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI RV620 HDMI Audio [Radeon HD 3400 Series] [1002:aa28] I've been wrestling with this problem for ages and ages and have spent days looking for answers on forums but to no avail so I would appreciate any help you can give. Many thanks

  Read the article

• Google Chrome with strange behavior

  - by user72274

  I'm former Chromium-browser user, but after not upgrading the PPA for 2 months, I switched to Google Chrome browser yesterday. Everything is okay, except some strange behavior on some pages and crashing after loading "chrome://" configuration pages. The best known website with strange behavior is youtube, there is a picture what I see: When I open user menu in top right corner, it crashes that way and even after closing the menu, some parts of menu stay display. You may say it's Youtube problem, no, I have this problem at least on three other websites, here it is on Imgur: The problem isn't for the whole side, sometimes it happens from the middle of the screen. The interesting part is that it happens everytime in the same distance from the right border. When I check the DOM elements with the Developer tool, the overlay which shows element's position is rendered how it should be. What is more, if there is anchor after the crashed area, it works after clicking on it. Selecting text in crashed page is impossible. I hope there is enough information to give me an advice, thanks in advance. :) EDIT: Here is what the browser posted in "chrome://gpu-internals/": Graphics Feature Status Canvas: Software only, hardware acceleration unavailable Compositing: Hardware accelerated 3D CSS: Hardware accelerated CSS Animation: Software animated. WebGL: Hardware accelerated WebGL multisampling: Hardware accelerated Problems Detected Accelerated CSS animation has been disabled at the command line. Accelerated 2d canvas is unstable in Linux at the moment. Ubuntu 12.04 | Gnome-shell 3.4.1 | ATI Radeon 4550 | Screen resolution 1024*768 | Chrome version 20.0.1132.57 (Official Build 145807)

  Read the article

• No sound Ubuntu 12.04 through HDMI

  - by MikeMan

  Specs: Asus G73JH i7/720; ATI Mobility 5870 I have read through a lot of threads on getting HDMI sound to work and non of them have fixed my issue. Granted I am very new to Linux and know only the GUI aspect of what it does from finding similarities that Windows 7 has. I would like to become a Linux Power User and I figured this would be a good step to get started. I was able to successfully install my graphics driver and it shows in use. I connect the HDMI to my HD TV and I get no sound. I don't care about auto switch for sound, that would be great but not necessary. I just want my sound to work through the HDMI. What I have tried: Changed GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" to GRUB_CMDLINE_LINUX_DEFAULT="quiet splash radeon.audio=1" pact set-card-profile 0 output:hdmi-surround Failure: no such entity Sound Settings: Right-click Sound indicator ? Sound Settings ? Output Tab, and set Digital Output (S/PDIF) Built in Audio Speakers Built in Audio I only get 2 settings. If I right-click the area below those 2 in the "play sound through" box, I get no "show hidden devices". I am also doing all this with the HDMI connected to eliminate any possibility for error.

  Read the article

• Display glitches running ATI propietary driver under Ubuntu 12.10

  - by crystallero

  I have a lot of problems with the Ati propietary driver (fglrx). I have an iMac (mid 2011) with a Radeon HD 6900M [1002:6720]. I did not have any problem under Ubuntu 12.04, but since I updated to 12.10, I get some annoying graphic corruption. The worst one is that sometimes the screen does not update with the new information. It happens a lot when I change between tabs in Chrome or Sublime Text. It usually gets updated when I scroll the page. Sometimes, when I type, I have to wait a little bit to view the new characters. And I get trails when I move windows too (like a part of the window). After a while, the trail disappears. I tried to install fglrx, fglrx-updates and the new beta driver downloaded from Ati (12.11 Beta 11/16/2012), with no luck. It happens the same with all of them. I tried to mess with Compiz config, but it didn't fix anything. The open source driver does not suffer this problem, but I need the performance of the propietary driver . Do you have any clue? Thanks.

  Read the article

• 13.04 Temp Save, rt3290, Kernel downgrade

  - by user170534

  It's kind of a multiplying but I didn't wanted to open more than one topics. I'd have a fresh install of Ubuntu with tlp configured and using acpi_call to keep 7670M turned off. I was a short time arch user and with openbox and firefox it was about 60 to 70 degrees; wanted to turn to a stable release just for this reason. acpitz-virtual-0 Adapter: Virtual device temp1: +50.0°C radeon-pci-0100 Adapter: PCI adapter temp1: -128.0°C coretemp-isa-0000 Adapter: ISA adapter Physical id 0: +56.0°C (high = +87.0°C, crit = +105.0°C) Core 0: +54.0°C (high = +87.0°C, crit = +105.0°C) Core 1: +55.0°C (high = +87.0°C, crit = +105.0°C) The temperature is not seriously high yet can be lower. Another issue is my wifi card, rt3290: The rt2800pci module is fine and all that but the download performance is pretty bad alongside of annoying signal range and the prop. driver gives a conf error about some specific rt2860 code and integrales in pci_dev file. If I blank off the error making variables, module loads but the driver is unused. Since the driver is old, I was thinking of downgrading the kernel of raring to 3.7 or may be 3.6. Should &-or can I?

  Read the article

• Is there a PROPRIETARY driver (NVIDIA or ATI) that actually works with 12.10?

  - by DS13

  NOTE: I see many similar topics on this, but I've tried all their suggestions, and nothing has worked. THE MAIN DIFFERENCE SEEMS TO BE: I always get a black screen with a blinking cursor, while others seem to get through the boot-up and see distorted graphics or just their wallpaper. ISSUE: I do a clean install of Ubuntu 12.10. Boots fine with the “nouveau” graphics driver – graphics (even just menus) are very slow, choppy, and distorted. The three other driver options in Ubuntu (official NVIDIA drivers), all result in a variation of the black screen on boot up. There will be NO access to a command line/GUI in anyway what-so-ever (tried every option recommended out there, but the system is unusable at this stage). I can only reinstall, and try different drivers…and I only ever get one shot at it. QUESTIONS: -Does anyone know of a PROPRIETARY driver that will actually work on 12.10 with a NVIDIA or ATI card? -Should I just buy a newer graphics card to put in as a replacement? MORE INFO: This is my second computer, and I’m just trying to get a working install of Ubuntu on it. I don’t want to put much money into it, as I have seen Ubuntu run great on much older/less capable machines. I’ve got a decent'ish Core2Duo Intel processor (2.13Ghz), 2GB of RAM, 320GB hard drive, 32-bit architecture, and there is no other O/S installed. It appears as if the graphics card (NVIDIA Geforce 7350 LE) is holding me back. TRIED SO FAR: -all drivers available in Ubuntu *all fail -manual install of some different NVIDIA drivers *all fail -also tried installing the generic kernel, Nvidia driver doesn't work in 12.10 *no difference -tried installing 12.04 *same results -every method suggested to at least get a command line after switching to a NVIDIA driver *all fail -UPDATE- Re-tried everything above with a new NVIDIA Geforce 210...same results for everything. -UPDATE #2- Re-tried everything above with a new AMD Radeon HD 6450...installed the proprietary driver from Ubuntu's "Software Sources" menu...EVERYTHING NOW WORKS. See "answer" below for summary.

  Read the article

• Unable to start after 13.04 > 13.10 udate

  - by romainl

  At the end of the update process, clicking on the Restart button had no visible effect whatsoever. After waiting 5 to 10 minutes, I decided to reboot the computer manually. Since then, I rebooted a good dozen times (not with the hope that it would work but with the hope of reading the messages) with the same non-result and the same symptoms: I get the ASCII text-on-purple Ubuntu 13.10 . . . . splash screen with these messages: * Restoring resolver state... [OK] * Starting crash report submission daemon [OK] * Starting CUPS printing spooler/server [OK] Everything disappears. The whole process hangs at a purple screen with the mouse cursor right in the middle. At this point, I'm unable to use the mouse and the keyboard. Booting from a 12.04 CD works perfectly, Disk Utility says that all my disks are OK and I can mount my main partition without problems. Something obviously went wrong at the end of the upgrade but I have no idea what. I'd appreciate any pointer. This is the kind of moment where you really think "Next time, I'll separate my /home partition for sure". My machine is an aging but working Dell Inspiron 530 with an Intel Core Duo E2160 processor, 2 GHz of RAM and an ATI Radeon HD3650 video card. Thanks.

  Read the article

• Why is text on my TV monitor all grainy?

  - by searchfgold6789

  I have successfully installed the Catalyst drivers and hooked up my 1080p TV to the Radeon HD 5750's HDMI port and now it is working. There only seems to be one issue - most images appear OK, at least to my eyes, but text is grainy and difficult to read (not sure how well it can be seen in the picture): It works fine with a smaller screen, and hopefully you can see it with the new pictures which are only slightly better, but images are rendered a little funny too. Changing antialiasing does nothing and changing the refresh rate only makes a slight change if any. The small monitor I have works fine. Smaller resolutions such as 1024x768 look OK but are the wrong aspect ratio. I have tried renaming the input mode on the TV to "PC", and that helped... a little bit. Also, I tried a different PC with the same result. Messing around extensively with the ATI Catalyst Control Center also did not help. I am wondering if there is anything else I can try to increase the quality so it is more usable.

  Read the article

• Dell Inspiron7520 and ubntu 12.04 issues

  - by user91358

  I have a DELL Inspiron 7520 in the highest configuration: 3rd Generation Intel® Core™ i7-3612QM processor (6M Cache, up to 3.1 GHz) 15.6" Full High Definition (1080p) LED Display 8GB3 Dual Channel DDR3 SDRAM at 1600MHz 1TB 5400RPM SATA HDD + 32GB mSATA SSD w/Intel Smart Response Blu-ray Disc (BD) Combo (Reads BD and Writes to DVD/CD) AMD Radeon™ HD 7730M 2GB 6.09 lbs and I have installed Ubuntu 12.04 few days ago and I'm facing some issues: 1) sometimes the whole ntb freezes and I have to hold power button for 5 secs to shut it down. I think it is something with VGA and connected external monitor. I have read somewhere that it is already a reported bug, but what I am not sure about that it is doing sporadically. Sometimes it freezes right after I log in, sometime I ran few hours and then it freezes. I am using those proprietary drivers but I wasn't been able to install those with updates. 2) the next issue is the fan is quite noisy even when the ntb is almost Idle. (max 10% CPU usage). Can you recommend me some software which could do this power management to lower the noise? I have tried CPU frequency scaling indicator, but it seems that it has not any effects. 3) and issue no. 3: when I want to log out, restart or shutdown using the menu in upper right corner the upper and left trays disappear, but programs are still running and they won't close to complete log out or shutting down the OS. When I use the CLI command, it works fine. Thanks for any help you can provide.

  Read the article

• Problems with dual monitor & resolutions, only in 14.04

  - by theLadder

  I installed Ubuntu 14.04 but i am having weird problems with my dual monitors and the resolutions. I also tried Xubuntu 14.04 and was having the same problem. I have one 32 inch LG TV with 1920x1080 and one monitor with 1280x1024 resolution. When i first start my 32 inch gets 1360x768, if i then try to change to 1920x1080, everythings looks fine and the prompt asking me if i want to keep settings comes up and starts the countdown, but after 2 seconds my computer freezes, and after a few more seconds it reboots itself. However, if i disable my smaller monitor first, i can change to 1920x1080 on my 32 inch without problems, but if i then activate the second monitor the same problem happens again. in Xubuntu 14.04 i can change the refresh rate, if i run the 32 inch at 30hz or 50hz everytying works, but i would like to be able to run it at 60hz. I'm currently running Xubuntu 13.10 without this problem. My graphics card is a ATI Radeon HD 4850. What is causing this problem, grahpics drivers? Kernel? Xorg? And how do i solve it?

  Read the article

• Problems with ATI propietary driver in Ubuntu 12.10, window trail and screen does not update

  - by crystallero

  I have problems with the Ati propietary driver (fglrx). I have an iMac (mid 2011) with a Radeon HD 6900M [1002:6720]. I did not have any problem under Ubuntu 12.04, but since I updated to 12.10, I get some annoying graphic corruption. The worst one is that sometimes the screen does not update with the new information. It happens a lot when I change between tabs in Chrome or Sublime Text. It usually gets updated when I scroll the page. Sometimes, when I type, I have to wait a little bit to view the new characters. And I get trails when I move windows too (like a part of the window). After a while, the trail disappears. I tried to install fglrx, fglrx-updates and the new beta driver downloaded from Ati (12.11 Beta 11/16/2012), with no luck. It happens the same with all of them. I tried to mess with Compiz config, but it didn't fix anything. The open source driver does not suffer this problem, but I need the performance of the propietary driver . Do you have clue? Thanks.

  Read the article

• Help trying/downloading ubuntu

  - by koolomwee

  I can't try ubuntu. Every time i put in my disk and press try, it shows the ubuntu sign with the dots under it than it shows a command screen basically blinking saying that it closed and canceled applications belonging to ubuntu... Than I tried to download it from the disk... same thing. Than, because I have windows, I tried to download it from the website and it worked. I rebooted my computer and went into the Ubuntu option just to find a blinking command screen again... How do I get ubuntu to work? What does happen (with the command screen) is that it shows commands that are blinking to fast for me to read the whole thing, and then it stops after like a minute or two of blinking. The only thing I do get to read is that Ubuntu commanded some applications to shut down. In the CD one it only has like 5 error messages, and when I reboot and select Ubuntu, there are over a hundred error messages. With the live-cd I have to shut down my computer to use it again. With the reboot and clicking ubuntu option it reboots by itself. I expect it to actually start up with no error messages. UPDATE I've been trying to start Ubuntu for the last couple of days, and I noticed on my last try that it said "SIGNAL 15 RECEIVED"... It also said that it's stopping Bluetooth and all other programs, and that its rebooting Maybe that'll help a little with answering my question... thanks :) this also might help: computer brand/model: HP Windows 7 Home Premium Service Pack 1, HPE240f graphics card: ATI Radeon HD 5570 I also wrote the same question here: https://answers.launchpad.net/wubi/+question/194537 might help a little more with information

  Read the article

• Extended display - nightmare

  - by user206343

  I have been struggling for quite a while, and I hope one of you can shed some lights on my issue. I am using Xubuntu 13.10 (Ubuntu 12.04LTS behaves the same way, higher version wouldn't install, LinuxMint didn't install, Fedora didn't install). I am trying to set extend display for two dell monitors 1900x1200. It works great when in mirror mode, but I just cannot extend the display. Either one monitor goes to sleep and the other is unresponsive, or both work but are unusable. This is a link to the picture of my monitors in mirror mode This is link showing what happens after I try to extend the desktop I get the same results if I use aRandr or the built in configuration utility. I have an ATI Radeon X300 card. I cannot use proprietary Catalyst drivers (I would have to use the legacy ones, which would force me into using much older version of the OS). Extension is possible with Windows. I am hoping someone can come up with tweaks that would allow me to run an extended desktop. I truly love Xubuntu (and Ubuntu, unfortunately, Unity is a bit too heavy for my old PC, and I have to run in 2D mode, so 12.04 is as high as I can go). I have tried everything I could find online, but nothing worked thus far. I believe some configuration or something I am missing might work. Please, if you have any idea, do not hesitate. Thanks guys.

  Read the article

• How do I solve "System is running in low graphics issue" in Ubuntu INSTALLER ?

  - by hellodear

  I made a bootable USB for installing Ubuntu 12.04 LTS alongside Windows 8.1. I inserted my USB device and then booted into it. Then it showed me 2 options - 'Try Ubuntu' or 'Install Ubuntu'. Now I press 'Try Ubuntu' and then it says, "The system is running in low graphics mode". Then I press 'OK'. Then it showed me 4 options. Then again I click 'OK'. Then it shows a black screen and nothing happens. I have tried all possible answers provided in AU. What should I do? Please help. PS :- I am using Windows 8.1 with dedicated graphic card which is AMD Radeon HD 8670M. I am trying to do this in a Dell Laptop 3537 Inspiron. UPDATE :- I tried running the liveUSB session with nomodeset on and i was able to enter the installer. But when I run boot-repair(so that my Ubuntu gets detected in the GRUB menu) after installing Ubuntu successfully alongside Windows 8(following this tutorial with nomodeset on, I get the following error:- your system is running in legacy mode boot repair done

  Read the article

• Ubuntu Eye-Infinity across 3 displays

  - by Peter G Mac.

  So I purchased a computer recently and have been trying to customise the display. Radeon 6800 series Ubuntu 10.10 I have three 22inch 1080P lcd monitors that are mounted together. Everything is working smooth. How do I get the 'big-desktop' display where I have one enormous display across all monitors? Linux - ATI Catalyst Control Center 11.2 does not give me an option to 'group' my profiles like the pictures on their site show with Windows. I have been searching all over for help. Much Obliged, -Peter

  Read the article

• Which is faster when animating the UI: a Control or a Picture?

  - by Christopher Walker

  /I'm working with and testing on a computer that is built with the following: {1 GB RAM (now 1.5 GB), 1.7 GHz Intel Pentium Processor, ATI Mobility Radeon X600 GFX} I need scale / transform controls and make it flow smoothly. Currently I'm manipulating the size and location of a control every 24-33ms (30fps), ±3px. When I add a 'fade' effect to an image, it fades in and out smoothly, but it is only 25x25 px in size. The control is 450x75 px to 450x250 px in size. In 2D games such as Bejeweled 3, the sprites animate with no choppy animation. So as the title would suggest: which is easier/faster on the processor: animating a bitmap (rendering it to the parent control during animation) or animating the control it's self?

  Read the article

• OpenGL performance on rendering "virtual gallery" (textures)

  - by maticus

  I have a considerable (120-240) amount of 640x480 images that will be displayed as textured flat surfaces (4 vertex polygons) in a 3D environment. About 30-50% of them will be visible in a given frame. It is possible for them to crossover. Nothing else will be present in the environment. The question is - will the modern and/or few-years-old (lets say Radeon 9550) GPU cope with that, and what frame rate can I expect? I aim for 20FPS, but 30-40 would be nice. Would changing the resolution to 320x240 make it more probable to happen? I do not have any previous experience with performance issues of 3D graphics on modern GPUs, and unfortunately I must make a design choice. I don't want to waste time on doing something that couldn't have worked :-)

  Read the article

• Unable to update/ install any files [closed]

  - by Surya

  Possible Duplicate: “Problem with MergeList” error when trying to do an update Just now I installed ubuntu 12.04 on my Lenovo G570 laptop. First I got an error at the time of installation (don't know about it) and I restarted the system and next time, it went well. So, after installing problems started.. There was a error with "Language recognition" and I tried to fix it but didn't work. I tried to install powerTop to check the status of power management. at terminal: sudo apt-get install powertop This is the error I got surya@surya-Lenovo-G570:~$ sudo apt-get powertop install [sudo] password for surya: E: Invalid operation powertop surya@surya-Lenovo-G570:~$ sudo apt-get install powertop Reading package lists... Error! E: Encountered a section with no Package: header E: Problem with MergeList /var/lib/apt/lists/extras.ubuntu.com_ubuntu_dists_precise_main_binary-i386_Packages E: The package lists or status file could not be parsed or opened. surya@surya-Lenovo-G570:~$ ^C surya@surya-Lenovo-G570:~$ ^C surya@surya-Lenovo-G570:~$ ^C surya@surya-Lenovo-G570:~$ I downloaded Google Chrome .deb one and tried to install but its not working. Software center is opened and its not loading. There was a notification on the status bar which says: An error occurred please run the package manager from the right-click menu ... .... ... E: Encountered a section with no Package: header E: Problem with MergeList /var/lib/apt/lists/extras.ubuntu.com_ubuntu_dists_precise_main_binary-i386_Packages "Copy & Paste" from terminal is not really working... When I press Ctrl + C; its showing ^C on terminal but its not working.. The most important error: I am unable to see a "chip" icon on the status bar so as to install proprietary drivers for my ATI drivers... The interesting part is, powertop worked will on live cd and it even detected my ATI card. Update When I opened "Software Up to Date", this showed a error: Could not initialize the package information An unresolvable problem occurred while initializing the package information. Please report this bug against the 'update-manager' package and include the following error message: 'E:Encountered a section with no Package: header, E:Problem with MergeList /var/lib/apt/lists/extras.ubuntu.com_ubuntu_dists_precise_main_binary-i386_Packages, E:The package lists or status file could not be parsed or opened.' : My laptop details Lenovo G570; Intel 2nd Gen i5 processor 4GB DDR3 RAM Intel in-build graphics + AMD Radeon HD 6370M 1GB graphics. I need help ASAP.

  Read the article

• VLC will sometimes have issues displaying video in fullscreen. What could cause this? How would I troubleshoot the issue?

  - by George Marian

  Recently VLC has been having issues displaying video in fullscreen mode. AFAIK, nothing has changed with the video card drivers and it's certainly the same version of VLC. (/me shakes a fist at the repository maintainers) This has worked without issue in the past. In fact, I've had as many as 6 instances of VLC running, each playing a video. One was always fullscreen on my second monitor, while the others were tiled on my primary monitor. I was able to toggle any of the other 5 into fullscreen mode and the video displayed without issue. Lately, I've been having trouble running 2 instances in fullscreen mode. (Sometimes, even a single instance will not display the video in fullscreen.) VLC will continue to play the video, but in fullscreen mode I see nothing but a black screen. Sometimes, the video will display if I maximize the VLC window. Other times, I have to settle for a smaller sized window. I don't know if this is pertinent, but sometimes changing the min/max state of a Firefox window (Minefield, specifically) seemed to allow the troublesome instance to display the video in fullscreen mode. However, that did not prove to be a consistent workaround. Sometimes, it seemed that closing a Firefox window did the trick, though that isn't consistently successful either. (I futzed with Firefox, because with the crazy number of windows and tabs that I normally have open, it regularly hogs about 1 GB of RAM.) Another bit of funkiness that comes to mind is the fact that my secondary monitor is considered the primary on boot-up. I use xrandr to designate the real 1st monitor as primary after boot-up, as suggested by someone in a question I asked on the Unix & Linux SE site. Specs: Ubuntu 10.10 w/ Gnome and Compiz 8GB RAM AMD Phenom II 965 Black Edition Asus M4A79 Deluxe mobo XFX ATI Radeon HD 5750 w/ 1GB RAM VLC is configured to use the hardware overlay for video (as per the default setting) Does anyone have an idea what may cause this issue or how I may go about troubleshooting it? Update: Right now I have 2 instances of VLC playing, each in fullscreen mode on a separate monitor. This is what I see:

  Read the article

• Brightness Crash and Fan issues in 12.04.1

  - by S.A. McIntosh

  I would just like to state beforehand that I am a total novice in using Ubuntu when it comes to the more complex issues. So I thought it would be best to finally come here and ask for help before being re-directed or closed out for a solution. I have already looked high and low on this board for one but nothing came up for my particular case, so I might as well take a shot asking for the first time here. This is what I have at the moment: -Dell Insprion 1764 w/ 64-bit Intel i5 Core -Dual Boot: Windows 7/Ubuntu 12.04.1 32-bit (from 12.04 install) -Unity shell -Linux kernel: 3.2.0-32 generic-pae ...and this is my fglrxinfo: OpenGL vendor string: Advanced Micro Devices, Inc. OpenGL renderer string: ATI Mobility Radeon HD 5000 Series OpenGL version string: 4.2.11627 Compatibility Profile Context The one issue I have with using Ubuntu is brightness. With the driver in every time I use the slider in the brightness and lock settings or use the keyboard function, it freezes, goes black and comes up with a scrambled colors page like this in the video. So I have looked all over this board and the web for answers looking for a solution that might have an answer. This is what I have done so far to fix this: -First Solution: Looking around, I found this small fix using terminal: sudo gedit /etc/rc.local followed by adding this into "rc.local" echo # > /sys/class/backlight/acpi_video0/brightness This works rarely with the graphics driver still in and I often get lucky say during restart but reboot would only snap back the brightness at max. -Second Solution Simply remove the graphics driver while leaving the solution of first behind. This solves the issue but results in having the monitor flicker and flash at startup which in itself is not a problem to me but maybe not so good for monitor health. Also it causes the fan to speed up throughout the session and render any program that needs the driver useless. -Third Solution This is the most obvious. Just simply use the brightness on AMD Catalyst Control Center software that came with the driver, and I can say that it's form of brightness is HORRIBLE compared to the actual settings. Which leads up to where I am now, back to the driver to stop the fan speed-up and seems that the only solution to the brightness crash is to use the keyboard-controlled brightness at the login screen NOT the desktop if I want the issued effect but will just snap at max bright again if I restart. Fan speed problem is dealt with but now run the risk of crashing my computer if I so much touch the brightness settings. Speaking of which I found this on launchpad and it seems that the issue has been going far since June of 2012. Any help, redirect link or reference would be greatly appreciated. Thank you.

  Read the article

< Previous Page | 28 29 30 31 32 33 34 35 36 37 38  | Next Page >