Search Results

Search found 2327 results on 94 pages for 'signal strength'.

Page 32/94 | < Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >

  • techniques for an AI for a highly cramped turn-based tactics game

    - by Adam M.
    I'm trying to write an AI for a tactics game in the vein of Final Fantasy Tactics or Vandal Hearts. I can't change the game rules in any way, only upgrade the AI. I have experience programming AI for classic board games (basically minimax and its variants), but I think the branching factor is too great for the approach to be reasonable here. I'll describe the game and some current AI flaws that I'd like to fix. I'd like to hear ideas for applicable techniques. I'm a decent enough programmer, so I only need the ideas, not an implementation (though that's always appreciated). I'd rather not expend effort chasing (too many) dead ends, so although speculation and brainstorming are good and probably helpful, I'd prefer to hear from somebody with actual experience solving this kind of problem. For those who know it, the game is the land battle mini-game in Sid Meier's Pirates! (2004) and you can skim/skip the next two paragraphs. For those who don't, here's briefly how it works. The battle is turn-based and takes place on a 16x16 grid. There are three terrain types: clear (no hindrance), forest (hinders movement, ranged attacks, and sight), and rock (impassible, but does not hinder attacks or sight). The map is randomly generated with roughly equal amounts of each type of terrain. Because there are many rock and forest tiles, movement is typically very cramped. This is tactically important. The terrain is not flat; higher terrain gives minor bonuses. The terrain is known to both sides. The player is always the attacker and the AI is always the defender, so it's perfectly valid for the AI to set up a defensive position and just wait. The player wins by killing all defenders or by getting a unit to the city gates (a tile on the other side of the map). There are very few units on each side, usually 4-8. Because of this, it's crucial not to take damage without gaining some advantage from it. Units can take multiple actions per turn. All units on one side move before any units on the other side. Order of execution is important, and interleaving of actions between units is often useful. Units have melee and ranged attacks. Melee attacks vary widely in strength; ranged attacks have the same strength but vary in range. The main challenges I face are these: Lots of useful move combinations start with a "useless" move that gains no immediate advantage, or even loses advantage, in order to set up a powerful flank attack in the future. And, since the player units are stronger and have longer range, the AI pretty much always has to take some losses before they can start to gain kills. The AI must be able to look ahead to distinguish between sacrificial actions that provide a future benefit and those that don't. Because the terrain is so cramped, most of the tactics come down to achieving good positioning with multiple units that work together to defend an area. For instance, two defenders can often dominate a narrow pass by positioning themselves so an enemy unit attempting to pass must expose itself to a flank attack. But one defender in the same pass would be useless, and three units can defend a slightly larger pass. Etc. The AI should be able to figure out where the player must go to reach the city gates and how to best position its few units to cover the approaches, shifting, splitting, or combining them appropriately as the player moves. Because flank attacks are extremely deadly (and engineering flank attacks is key to the player strategy), the AI should be competent at moving its units so that they cover each other's flanks unless the sacrifice of a unit would give a substantial benefit. They should also be able to force flank attacks on players, for instance by threatening a unit from two different directions such that responding to one threat exposes the flank to the other. The AI should attack if possible, but sometimes there are no good ways to approach the player's position. In that case, the AI should be able to recognize this and set up a defensive position of its own. But the AI shouldn't be vulnerable to a trivial exploit where the player repeatedly opens and closes a hole in his defense and shoots at the AI as it approaches and retreats. That is, the AI should ideally be able to recognize that the player is capable of establishing a solid defense of an area, even if the defense is not currently in place. (I suppose if a good unit allocation algorithm existed, as needed for the second bullet point, the AI could run it on the player units to see where they could defend.) Because it's important to choose a good order of action and interleave actions between units, it's not as simple as just finding the best move for each unit in turn. All of these can be accomplished with a minimax search in theory, but the search space is too large, so specialized techniques are needed. I thought about techniques such as influence mapping, but I don't see how to use the technique to great effect. I thought about assigning goals to the units. This can help them work together in some limited way, and the problem of "how do I accomplish this goal?" is easier to solve than "how do I win this battle?", but assigning good goals is a hard problem in itself, because it requires knowing whether the goal is achievable and whether it's a good use of resources. So, does anyone have specific ideas for techniques that can help cleverize this AI? Update: I found a related question on Stackoverflow: http://stackoverflow.com/questions/3133273/ai-for-a-final-fantasy-tactics-like-game The selected answer gives a decent approach to choosing between alternative actions, but it doesn't seem to have much ability to look into the future and discern beneficial sacrifices from wasteful ones. It also focuses on a single unit at a time and it's not clear how it could be extended to support cooperation between units in defending or attacking.

    Read the article

  • Need personal advice on how to get out of a company..

    - by SOfan
    Hi, I am an SO user since past 6 months and this is the first time I am turning to SO for personal help. I have asked technical questions before with my real ID. I am stuck inside a service based IT company for the past one year and haven't been able to decide if to leave it, when to leave it and how to leave it. I had taken 2 weeks LWP on medical reason roughly at end of 1 year and then soon after reporting, I applied for 2 months more LWP (on medical/personal ground) with the intention of working on my health,take up a hobby class to ward off depression,pessimism, to have some fun in life, and to look for a job which I really would be excited about - that interests me and which matches with my strength. My leave starts from this Monday. So in any case, I had hard set in mind that I will leave the company after I join them back hopefully with some job offer already in hand (after figuring out what I want do). Neither I can stand the past project,past colleagues,company, HR, pathetically low salary. But if I really listen to my heart, I don't want to have to go back to that office after my sabbatical and again have to see those people. I will have to resign it after my sabbatical ends. Then HR people perhaps wont like it, may even accuse me on face or behind back that primary purpose of my leave must have been to hunt for a better job and I lied about medical and person reasons. Also, if they get nasty and force me to serve 2 months notice period. There is no way I see myself after sabbatical resuming in old project or starting new work. It will be a pain. Since they have already approved 2 months leave and stuff, ideally if they want, they should be just able to relieve me right on the next day after I join back. But, I don't know if they want to get nasty, will they mention about my 2 months sabbatical leave in my experience letter or more scary, the term medical/personal reason. I have hard earned my experience here, have worked against my will, mostly it has been painful and slogged like anything, because I realize the importance of work experience in IT industry. I don't have greed to have those 2 months included extra in my experience letter, but I don't want to mess up with my experience letter in a way which makes my next employer ask question, get suspicious, or be wary if I have any medical reason going on. Being an emotional,moody person or somebody who can't be in an environment, once my mind and heart starts hating it. I think it perhaps is best, if I resign on Monday itself telling them (in polite manner) something that look I took sabbatical for some reason but I don't want to resume working in the company after my sabbatical ends. So please accept my resignation. Now tell me what you want to do about my leave request, my notice period and when you are willing to relieve me. What should I write and how? Some background: I am working in an IT company in India.I am overqualified in the company. It is grossly underpaying me. My education qualifications far exceed anyone's in the whole company being a CS undergrad as well as a CS grad. I joined this company after finishing the grad. I had self-doubts about my skills and interest as a programmer. I like doing research oriented work, though didn't have any particular success during grad. My life here has been very hectic. The project containing many many sub-projects has kept me on my toes and I have never really liked the work. I have been playing against my strength. Also the company strict internet usage policy (you can't read gmails, can't browse any non-work related sites not even news). When working for a client, from the machine we can't even check company related emails.For this one has to go to kiosk like 5 machines in a small room etc. Most of the times those machines are not available, so it was not unusual to keep making rounds to these kiosk machines to check company emails, browse company related emails etc.So it was not so easy to keep in touch with company related basic affairs for a not particular careful person. Things like this which are new to me, make me feel restricted. I am an undecisive person with a sense of failure, self-doubt, not meeting up unrealistic expectation. Somewhere at back of mind, I envy my classmates who make a smooth transition from company to company without causing any gap in their resume. I on other hand have gaps in resume. I get tired after working in a place for sometime. problem with colleagues in general. I am not particular great with people, have few friends, not known for a fun nature, rather serious, scholar. I am not a typical conventional female. I think females are usually more disciplined. But I am not so. I reach office late (though after informing manager). I don't want to blame them entirely, because from my past, it is not unusual for me to get undecisive on things. Also I had doubts about my ability as researched and to succeed there. of building a relationship in a group, to have something to talk about, newspaper. I get cut-off from people. peer pressure. I make blunders in coding, lose patience. Consciously or unconsciously I feel contempt for people here, work here, environment here. I have doubts that either I go to a place which does innovation, does research oriented work, product biggies, have great motivated people, have competent people passionate about products they are building. But then I also doubt my ability to survive there. I have identified that an idea job for me would be 4 days a week, a high salary job. When among people in company/team, I can't think much. I need some time at home to read good authentic books written in good style on what work I am doing.So that I am comfortable with my understanding of work. I get into pressure easily under deadline and need 5th day to cool myself off. I took for 2 weeks leave, because each day was hell for me. May be the depression phase of bipolar is on and also partially it could be that being a work centered person, who derives happiness,self-esteem from work, haven't been enjoying work and have been working for the sole person of proving stability, and ability to stick, against all odds, and facing what challenges I see, bonding with people, identifying opportunities to learn in given task etc.have been averaging one day LWP in 1 week or 10 days. or may be because of my nature,ADD,not being able to switch context,out of touch with news, don't have a circle of friends with who I enjoy. less knowledge in general to talk about, just some technical stuff.anyway, so due to emotional reason, some practical reason etc, I wanted to be very sure before leaving. So my leave starts from Monday and I should feel happy about it. I have taken the leave to for a few purposes - to take care of my health by regular yoga/exercise (with project on, I just can't do anything regular), reassess myself to see what I want to try next which work I might like, look for next job, take up a hobby which I like say singing. I am not clear on my career,job aspiration. I have tried my hands on research. During this year appraisal yesterday, I even had some conflict with my last manager. In meeting with me one on one, he would say all nice things about me, but in feedback to new manager, he hasn't given any excellent feedback. It is all only good. I am angry at this old Manager. Also new manager also scolded me as I didn't agree to his appraisal and waited to hear myself from old Manager. He kind of scolded me for wasting his time. Am I being unethical somewhere? I am always very conscious of if I am cheating anywhere. What advice I am seeking? How to resign and what to write in resignation letter

    Read the article

  • Wireless internet connection connects but internet does not work (no packets received). Wired does.

    - by Rodney
    When I connect my PC via ethernet cable to my ADSL router it works fine. When I connect via Wireless it connects and the internet will work for a random amount of time and then stop working. It stays connected with a strong signal but no packets are received. My laptop/iphone are right next to it and wireless works fine. If I open the Wireless USB status, it says it is connected to my SSID with full strength (54 mps - I am 3 meteres away from my router) and the activty shows as Packets 594 SENT and 105 RECEIVED (this goes up VERY slowly) I have tried the following: Turned off anitvirus and firewall completely. Tested the wifi signal- I am writing this on my laptop which is next to my PC and also has full wifi strength. Tried a different wireless adapter - I dug out an old PCI wireless card - it does the exact same thing. Compared all wireless settings to my laptop. I can ping google.com and it replies (sometimes with packet loss) When I reboot the PC it will connect for a minute or two (random time) and then just stops again. I tried Firefox, IE etc. no joy I have updated all latest versions (Netgear WG111v2) and drivers Checked Event Log - nothing unusual Ping the router (and even connect as admin for the few minutes when the internet does work) Changed the MTU down to 1200 using DrTCP Checked Device Manager for conflicts - none. I ping the router from the PC (192.168.0.10 - 192.168.0.1) and it replies with 4 packets. BUT, on my router admin page (which I access via http on my laptop wirelessly) - if I ping 192.168.0.10 all packets timeout (pinging my laptop 192.168.0.12 works fine) My router admin page shows the leased IP address for 192.168.0.10 (ie it is definitely talking to the router initially) Now I am out of ideas - please help. I think it is an OS/Software issue as I have tried 2 different wireless adapaters (PCI and USB) with the same result but all other wireless devices work fine around mine). It's not the firewall. It is getting assigned an IP address correctly (my PC gets 192.168.0.10, my laptop is .12) It is assigned by DHCP. As soon as I plug in the ethernet cable it all works fine. Repairing the adapter sometimes helps but it will always stop working after a random time. The wireless adapter always shows as connected with Excellent signal but the internet does not work. I am running Windows XP SP3 and have tried a Netgear WG111v2 USB adapter. Thanks in advance! UPDATE: The internet seems to be working, it is just either sending packets too small or slow to work (some small pages load bits of them very slowly but then hang). XP seems to have a networking diagnostic app - here is the output: Last diagnostic run time: 08/30/10 08:16:38 IP Configuration Diagnostic Invalid IP address info Valid IP address detected: 192.168.0.10 IP Layer Diagnostic Corrupted IP routing table info The default route is valid info The loopback route is valid info The local host route is valid info The local subnet route is valid Invalid ARP cache entries action The ARP cache has been flushed Gateway Diagnostic Gateway info The following proxy configuration is being used by IE: Automatically Detect Settings:Disabled Automatic Configuration Script: Proxy Server: Proxy Bypass list: info This computer has the following default gateway entry(ies): 192.168.0.1 info This computer has the following IP address(es): 192.168.0.10 info The default gateway is in the same subnet as this computer info The default gateway entry is a valid unicast address info The default gateway address was resolved via ARP in 1 try(ies) info The default gateway was reached via ICMP Ping in 1 try(ies) info TCP port 80 on host 65.55.12.249 was successfully reached info The Internet host www.microsoft.com was successfully reached info The default gateway is OK DNS Client Diagnostic DNS - Not a home user scenario info Using Web Proxy: no info Resolving name ok for (www.microsoft.com): yes No DNS servers DNS failure HTTP, HTTPS, FTP Diagnostic HTTP, HTTPS, FTP connectivity info FTP (Passive): Successfully connected to ftp.microsoft.com. info HTTP: Successfully connected to www.microsoft.com. warn HTTPS: Error 12002 connecting to www.microsoft.com: The operation timed out warn HTTPS: Error 12002 connecting to www.passport.net: The operation timed out error Could not make an HTTPS connection. info Redirecting user to support call WinSock Diagnostic WinSock status info All base service provider entries are present in the Winsock catalog. info The Winsock Service provider chains are valid. info Provider entry MSAFD Tcpip [TCP/IP] passed the loopback communication test. info Provider entry MSAFD Tcpip [UDP/IP] passed the loopback communication test. info Provider entry RSVP UDP Service Provider passed the loopback communication test. info Provider entry RSVP TCP Service Provider passed the loopback communication test. info Connectivity is valid for all Winsock service providers. Wireless Diagnostic Wireless - Service disabled Wireless - User SSID action User input required: Specify network name or SSID Wireless - First time setup info The Wireless Network name (SSID) to which the user would like to connect = RodSof Wifi. Wireless - Radio off info Valid IP address detected: 192.168.0.10 Wireless - Out of range Wireless - Hardware issue Wireless - Novice user Wireless - Ad-hoc network Wireless - Less preferred Wireless - 802.1x enabled Wireless - Configuration mismatch Wireless - Low SNR Network Adapter Diagnostic Network location detection info Using home Internet connection Network adapter identification info Network connection: Name=Local Area Connection 2, Device=Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC, MediaType=LAN, SubMediaType=LAN info Network connection: Name=Wireless USB, Device=NETGEAR WG111v2 54Mbps Wireless USB 2.0 Adapter, MediaType=LAN, SubMediaType=WIRELESS info Both Ethernet and Wireless connections available, prompting user for selection action User input required: Select network connection info Wireless connection selected Network adapter status info Network connection status: Connected HTTP, HTTPS, FTP Diagnostic HTTP, HTTPS, FTP connectivity info FTP (Active): Successfully connected to ftp.microsoft.com. warn HTTP: Error 12007 connecting to www.microsoft.com: The server name or address could not be resolved warn HTTP: Error 12002 connecting to www.hotmail.com: The operation timed out warn HTTPS: Error 12002 connecting to www.passport.net: The operation timed out warn HTTPS: Error 12002 connecting to www.microsoft.com: The operation timed out error Could not make an HTTP connection. error Could not make an HTTPS connection.

    Read the article

  • Twitter 2 for Android crash every time I try uploading multi photos [closed]

    - by Hazz
    Hello, I'm using the new Twitter 2 on Android 2.1. Whenever I hit the button which enables me to upload multiple photos in a single tweet, I always get the error "The application Camera (process com.sonyericsson.camera) has stopped unexpectidly. Please try again". However, uploading a single photo using the camera button in Twitter have no problem, it works. My phone is Sony Ericsson x10 mini pro. I tried signing out and back in, same result. Anything I can do to fix this? This is the log info I got using Log Collector: 02-23 15:05:57.328 I/ActivityManager( 1240): Starting activity: Intent { act=com.twitter.android.post.status cmp=com.twitter.android/.PostActivity } 02-23 15:05:57.338 D/PhoneWindow(15095): couldn't save which view has focus because the focused view com.android.internal.policy.impl.PhoneWindow$DecorView@45726938 has no id. 02-23 15:05:57.688 I/ActivityManager( 1240): Displayed activity com.twitter.android/.PostActivity: 340 ms (total 340 ms) 02-23 15:05:59.018 I/ActivityManager( 1240): Starting activity: Intent { act=android.intent.action.PICK typ=vnd.android.cursor.dir/image cmp=com.sonyericsson.camera/com.sonyericsson.album.grid.GridActivity } 02-23 15:05:59.038 I/ActivityManager( 1240): Start proc com.sonyericsson.camera for activity com.sonyericsson.camera/com.sonyericsson.album.grid.GridActivity: pid=15113 uid=10057 gids={1006, 1015, 3003} 02-23 15:05:59.128 I/dalvikvm(15113): Debugger thread not active, ignoring DDM send (t=0x41504e4d l=38) 02-23 15:05:59.158 I/dalvikvm(15113): Debugger thread not active, ignoring DDM send (t=0x41504e4d l=50) 02-23 15:05:59.448 I/ActivityManager( 1240): Displayed activity com.sonyericsson.camera/com.sonyericsson.album.grid.GridActivity: 423 ms (total 423 ms) 02-23 15:05:59.458 W/dalvikvm(15113): threadid=15: thread exiting with uncaught exception (group=0x4001e160) 02-23 15:05:59.458 E/AndroidRuntime(15113): Uncaught handler: thread AsyncTask #1 exiting due to uncaught exception 02-23 15:05:59.468 E/AndroidRuntime(15113): java.lang.RuntimeException: An error occured while executing doInBackground() 02-23 15:05:59.468 E/AndroidRuntime(15113): at android.os.AsyncTask$3.done(AsyncTask.java:200) 02-23 15:05:59.468 E/AndroidRuntime(15113): at java.util.concurrent.FutureTask$Sync.innerSetException(FutureTask.java:273) 02-23 15:05:59.468 E/AndroidRuntime(15113): at java.util.concurrent.FutureTask.setException(FutureTask.java:124) 02-23 15:05:59.468 E/AndroidRuntime(15113): at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:307) 02-23 15:05:59.468 E/AndroidRuntime(15113): at java.util.concurrent.FutureTask.run(FutureTask.java:137) 02-23 15:05:59.468 E/AndroidRuntime(15113): at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1068) 02-23 15:05:59.468 E/AndroidRuntime(15113): at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:561) 02-23 15:05:59.468 E/AndroidRuntime(15113): at java.lang.Thread.run(Thread.java:1096) 02-23 15:05:59.468 E/AndroidRuntime(15113): Caused by: java.lang.IllegalArgumentException: Unsupported MIME type. 02-23 15:05:59.468 E/AndroidRuntime(15113): at com.sonyericsson.album.grid.GridActivity$AlbumTask.doInBackground(GridActivity.java:202) 02-23 15:05:59.468 E/AndroidRuntime(15113): at com.sonyericsson.album.grid.GridActivity$AlbumTask.doInBackground(GridActivity.java:124) 02-23 15:05:59.468 E/AndroidRuntime(15113): at android.os.AsyncTask$2.call(AsyncTask.java:185) 02-23 15:05:59.468 E/AndroidRuntime(15113): at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:305) 02-23 15:05:59.468 E/AndroidRuntime(15113): ... 4 more 02-23 15:05:59.628 E/SemcCheckin(15113): Get crash dump level : java.io.FileNotFoundException: /data/semc-checkin/crashdump 02-23 15:05:59.628 W/ActivityManager( 1240): Unable to start service Intent { act=com.sonyericsson.android.jcrashcatcher.action.BUGREPORT_AUTO cmp=com.sonyericsson.android.jcrashcatcher/.JCrashCatcherService (has extras) }: not found 02-23 15:05:59.648 I/Process ( 1240): Sending signal. PID: 15113 SIG: 3 02-23 15:05:59.648 I/dalvikvm(15113): threadid=7: reacting to signal 3 02-23 15:05:59.778 I/dalvikvm(15113): Wrote stack trace to '/data/anr/traces.txt' 02-23 15:06:00.388 E/SemcCheckin( 1673): Get Crash Level : java.io.FileNotFoundException: /data/semc-checkin/crashdump 02-23 15:06:01.708 I/DumpStateReceiver( 1240): Added state dump to 1 crashes 02-23 15:06:02.008 D/iddd-events( 1117): Registering event com.sonyericsson.idd.probe.android.devicemonitor::ApplicationCrash with 4314 bytes payload. 02-23 15:06:06.968 D/dalvikvm( 1673): GC freed 661 objects / 126704 bytes in 124ms 02-23 15:06:11.928 D/dalvikvm( 1379): GC freed 19753 objects / 858832 bytes in 84ms 02-23 15:06:13.038 I/Process (15113): Sending signal. PID: 15113 SIG: 9 02-23 15:06:13.048 I/WindowManager( 1240): WIN DEATH: Window{4596ecc0 com.sonyericsson.camera/com.sonyericsson.album.grid.GridActivity paused=false} 02-23 15:06:13.048 I/ActivityManager( 1240): Process com.sonyericsson.camera (pid 15113) has died. 02-23 15:06:13.048 I/WindowManager( 1240): WIN DEATH: Window{459db5e8 com.sonyericsson.camera/com.sonyericsson.album.grid.GridActivity paused=false} 02-23 15:06:13.078 I/UsageStats( 1240): Unexpected resume of com.twitter.android while already resumed in com.sonyericsson.camera 02-23 15:06:13.098 W/InputManagerService( 1240): Window already focused, ignoring focus gain of: com.android.internal.view.IInputMethodClient$Stub$Proxy@456e7168 02-23 15:06:21.278 D/dalvikvm( 1745): GC freed 2032 objects / 410848 bytes in 60ms

    Read the article

  • qwebview in pyside after packaged with pyinstaller goes wrong

    - by truease.com
    Here's my code import sys from PySide.QtCore import * from PySide.QtGui import * from PySide.QtWebKit import * from encodings import * from codecs import * class BrowserWindow( QWidget ): def __init__( self, parent=None ): QWidget.__init__( self, parent ) self.Setup() self.SetupEvent() def Setup( self ): self.setWindowTitle( u"Truease Speedy Browser" ) self.addr_input = QLineEdit() self.addr_go = QPushButton( "GO" ) self.addr_bar = QHBoxLayout() self.addr_bar.addWidget( self.addr_input ) self.addr_bar.addWidget( self.addr_go ) for attr in [ QWebSettings.AutoLoadImages, QWebSettings.JavascriptEnabled, QWebSettings.JavaEnabled, QWebSettings.PluginsEnabled, QWebSettings.JavascriptCanOpenWindows, QWebSettings.JavascriptCanAccessClipboard, QWebSettings.DeveloperExtrasEnabled, QWebSettings.SpatialNavigationEnabled, QWebSettings.OfflineStorageDatabaseEnabled, QWebSettings.OfflineWebApplicationCacheEnabled, QWebSettings.LocalStorageEnabled, QWebSettings.LocalStorageDatabaseEnabled, QWebSettings.LocalContentCanAccessRemoteUrls, QWebSettings.LocalContentCanAccessFileUrls, ]: QWebSettings.globalSettings().setAttribute( attr, True ) self.web_view = QWebView() self.web_view.load( "http://www.baidu.com" ) layout = QVBoxLayout() layout.addLayout( self.addr_bar ) layout.addWidget( self.web_view ) self.setLayout( layout ) def SetupEvent( self ): self.connect( self.addr_input, SIGNAL("editingFinished()"), self, SLOT("Load()"), ) self.connect( self.addr_go, SIGNAL("pressed()"), self, SLOT("Load()") ) self.connect( self.web_view, SIGNAL("urlChanged(const QUrl&)"), self, SLOT("SetURL()"), ) def Load( self, *args, **kwargs ): url = self.GetCleanedURL() if url != self.CurrentURL(): self.web_view.load( url ) def SetURL( self, *args, **kwargs ): self.addr_input.setText( self.CurrentURL() ) def GetCleanedURL( self ): url = self.addr_input.text().strip() if not url.startswith("http"): url = "http://" + url return url def CurrentURL( self ): url = self.web_view.url().toString() return url def Main(): app = QApplication( sys.argv ) widget = BrowserWindow() widget.show() return app.exec_() if __name__ == '__main__': sys.exit( Main() ) I works well when i using python browser.py. but it goes wrong after packaged with pyinstaller -w browser.py. it doesn't load images can only display correct text in utf-8 And this is the pyinstaller output: E:\true\wuk\app2>pyinstaller -w b.py 16 INFO: wrote E:\true\wuk\app2\b.spec 16 INFO: Testing for ability to set icons, version resources... 32 INFO: ... resource update available 32 INFO: UPX is not available. 46 INFO: Processing hook hook-os 141 INFO: Processing hook hook-time 157 INFO: Processing hook hook-cPickle 218 INFO: Processing hook hook-_sre 312 INFO: Processing hook hook-cStringIO 407 INFO: Processing hook hook-encodings 421 INFO: Processing hook hook-codecs 750 INFO: Processing hook hook-httplib 750 INFO: Processing hook hook-email 843 INFO: Processing hook hook-email.message 1046 WARNING: library python%s%s required via ctypes not found 1171 INFO: Extending PYTHONPATH with E:\true\wuk\app2 1171 INFO: checking Analysis 1171 INFO: building because b.py changed 1171 INFO: running Analysis out00-Analysis.toc 1171 INFO: Adding Microsoft.VC90.CRT to dependent assemblies of final executable 1171 INFO: Searching for assembly x86_Microsoft.VC90.CRT_1fc8b3b9a1e18e3b_9.0.21022.8_x-ww ... 1171 INFO: Found manifest C:\WINDOWS\WinSxS\Manifests\x86_Microsoft.VC90.CRT_1fc8b3b9a1e18e3b_9.0.21022.8_x-ww_d08d0375.manifest 1187 INFO: Searching for file msvcr90.dll 1187 INFO: Found file C:\WINDOWS\WinSxS\x86_Microsoft.VC90.CRT_1fc8b3b9a1e18e3b_9.0.21022.8_x-ww_d08d0375\msvcr90.dll 1187 INFO: Searching for file msvcp90.dll 1187 INFO: Found file C:\WINDOWS\WinSxS\x86_Microsoft.VC90.CRT_1fc8b3b9a1e18e3b_9.0.21022.8_x-ww_d08d0375\msvcp90.dll 1187 INFO: Searching for file msvcm90.dll 1187 INFO: Found file C:\WINDOWS\WinSxS\x86_Microsoft.VC90.CRT_1fc8b3b9a1e18e3b_9.0.21022.8_x-ww_d08d0375\msvcm90.dll 1266 INFO: Analyzing D:\Applications\Python\lib\site-packages\pyinstaller-2.1-py2.7.egg\PyInstaller\loader\_pyi_bootstrap.py 1266 INFO: Processing hook hook-os 1282 INFO: Processing hook hook-site 1296 INFO: Processing hook hook-encodings 1391 INFO: Processing hook hook-time 1407 INFO: Processing hook hook-cPickle 1468 INFO: Processing hook hook-_sre 1578 INFO: Processing hook hook-cStringIO 1671 INFO: Processing hook hook-codecs 2016 INFO: Processing hook hook-httplib 2016 INFO: Processing hook hook-email 2109 INFO: Processing hook hook-email.message 2312 WARNING: library python%s%s required via ctypes not found 2468 INFO: Processing hook hook-pydoc 2516 INFO: Analyzing D:\Applications\Python\lib\site-packages\pyinstaller-2.1-py2.7.egg\PyInstaller\loader\pyi_importers.py 2609 INFO: Analyzing D:\Applications\Python\lib\site-packages\pyinstaller-2.1-py2.7.egg\PyInstaller\loader\pyi_archive.py 2687 INFO: Analyzing D:\Applications\Python\lib\site-packages\pyinstaller-2.1-py2.7.egg\PyInstaller\loader\pyi_carchive.py 2782 INFO: Analyzing D:\Applications\Python\lib\site-packages\pyinstaller-2.1-py2.7.egg\PyInstaller\loader\pyi_os_path.py 2782 INFO: Analyzing b.py 2796 INFO: Processing hook hook-PySide 2875 INFO: Hidden import 'codecs' has been found otherwise 2875 INFO: Hidden import 'encodings' has been found otherwise 2875 INFO: Looking for run-time hooks 7766 INFO: Using Python library C:\WINDOWS\system32\python27.dll 7796 INFO: E:\true\wuk\app2\build\b\out00-Analysis.toc no change! 7796 INFO: checking PYZ 7812 INFO: checking PKG 7812 INFO: building because E:\true\wuk\app2\build\b\b.exe.manifest changed 7812 INFO: building PKG (CArchive) out00-PKG.pkg 7828 INFO: checking EXE 7843 INFO: rebuilding out00-EXE.toc because pkg is more recent 7843 INFO: building EXE from out00-EXE.toc 7843 INFO: Appending archive to EXE E:\true\wuk\app2\build\b\b.exe 7843 INFO: checking COLLECT 7843 INFO: building COLLECT out00-COLLECT.toc Use pyinstaller browser.py, and in the console window i got QFont::setPixelSize: Pixel size <= 0 (0) QSslSocket: cannot call unresolved function SSLv23_client_method QSslSocket: cannot call unresolved function SSL_CTX_new QSslSocket: cannot call unresolved function SSL_library_init QSslSocket: cannot call unresolved function ERR_get_error QSslSocket: cannot call unresolved function SSLv23_client_method QSslSocket: cannot call unresolved function SSL_CTX_new QSslSocket: cannot call unresolved function SSL_library_init QSslSocket: cannot call unresolved function ERR_get_error QSslSocket: cannot call unresolved function SSLv23_client_method QSslSocket: cannot call unresolved function SSL_CTX_new QSslSocket: cannot call unresolved function SSL_library_init QSslSocket: cannot call unresolved function ERR_get_error QSslSocket: cannot call unresolved function SSLv23_client_method QSslSocket: cannot call unresolved function SSL_CTX_new QSslSocket: cannot call unresolved function SSL_library_init QSslSocket: cannot call unresolved function ERR_get_error QFont::setPixelSize: Pixel size <= 0 (0)

    Read the article

  • Refresh QTextEdit in PyQt

    - by Mark Underwood
    Hi all, Im writing a PyQt app that takes some input in one widget, and then processes some text files. What ive got at the moment is when the user clicks the "process" button a seperate window with a QTextEdit in it pops up, and ouputs some logging messages. On Mac OS X this window is refreshed automatically and you cna see the process. On Windows, the window reports (Not Responding) and then once all the proccessing is done, the log output is shown. Im assuming I need to refresh the window after each write into the log, and ive had a look around at using a timer. etc, but havnt had much luck in getting it working. Below is the source code. It has two files, GUI.py which does all the GUI stuff and MOVtoMXF that does all the processing. GUI.py import os import sys import MOVtoMXF from PyQt4.QtCore import * from PyQt4.QtGui import * class Form(QDialog): def process(self): path = str(self.pathBox.displayText()) if(path == ''): QMessageBox.warning(self, "Empty Path", "You didnt fill something out.") return xmlFile = str(self.xmlFileBox.displayText()) if(xmlFile == ''): QMessageBox.warning(self, "No XML file", "You didnt fill something.") return outFileName = str(self.outfileNameBox.displayText()) if(outFileName == ''): QMessageBox.warning(self, "No Output File", "You didnt do something") return print path + " " + xmlFile + " " + outFileName mov1 = MOVtoMXF.MOVtoMXF(path, xmlFile, outFileName, self.log) self.log.show() rc = mov1.ScanFile() if( rc < 0): print "something happened" #self.done(0) def __init__(self, parent=None): super(Form, self).__init__(parent) self.log = Log() self.pathLabel = QLabel("P2 Path:") self.pathBox = QLineEdit("") self.pathBrowseB = QPushButton("Browse") self.pathLayout = QHBoxLayout() self.pathLayout.addStretch() self.pathLayout.addWidget(self.pathLabel) self.pathLayout.addWidget(self.pathBox) self.pathLayout.addWidget(self.pathBrowseB) self.xmlLabel = QLabel("FCP XML File:") self.xmlFileBox = QLineEdit("") self.xmlFileBrowseB = QPushButton("Browse") self.xmlLayout = QHBoxLayout() self.xmlLayout.addStretch() self.xmlLayout.addWidget(self.xmlLabel) self.xmlLayout.addWidget(self.xmlFileBox) self.xmlLayout.addWidget(self.xmlFileBrowseB) self.outFileLabel = QLabel("Save to:") self.outfileNameBox = QLineEdit("") self.outputFileBrowseB = QPushButton("Browse") self.outputLayout = QHBoxLayout() self.outputLayout.addStretch() self.outputLayout.addWidget(self.outFileLabel) self.outputLayout.addWidget(self.outfileNameBox) self.outputLayout.addWidget(self.outputFileBrowseB) self.exitButton = QPushButton("Exit") self.processButton = QPushButton("Process") self.buttonLayout = QHBoxLayout() #self.buttonLayout.addStretch() self.buttonLayout.addWidget(self.exitButton) self.buttonLayout.addWidget(self.processButton) self.layout = QVBoxLayout() self.layout.addLayout(self.pathLayout) self.layout.addLayout(self.xmlLayout) self.layout.addLayout(self.outputLayout) self.layout.addLayout(self.buttonLayout) self.setLayout(self.layout) self.pathBox.setFocus() self.setWindowTitle("MOVtoMXF") self.connect(self.processButton, SIGNAL("clicked()"), self.process) self.connect(self.exitButton, SIGNAL("clicked()"), self, SLOT("reject()")) self.ConnectButtons() class Log(QTextEdit): def __init__(self, parent=None): super(Log, self).__init__(parent) self.timer = QTimer() self.connect(self.timer, SIGNAL("timeout()"), self.updateText()) self.timer.start(2000) def updateText(self): print "update Called" AND MOVtoMXF.py import os import sys import time import string import FileUtils import shutil import re class MOVtoMXF: #Class to do the MOVtoMXF stuff. def __init__(self, path, xmlFile, outputFile, edit): self.MXFdict = {} self.MOVDict = {} self.path = path self.xmlFile = xmlFile self.outputFile = outputFile self.outputDirectory = outputFile.rsplit('/',1) self.outputDirectory = self.outputDirectory[0] sys.stdout = OutLog( edit, sys.stdout) class OutLog(): def __init__(self, edit, out=None, color=None): """(edit, out=None, color=None) -> can write stdout, stderr to a QTextEdit. edit = QTextEdit out = alternate stream ( can be the original sys.stdout ) color = alternate color (i.e. color stderr a different color) """ self.edit = edit self.out = None self.color = color def write(self, m): if self.color: tc = self.edit.textColor() self.edit.setTextColor(self.color) #self.edit.moveCursor(QtGui.QTextCursor.End) self.edit.insertPlainText( m ) if self.color: self.edit.setTextColor(tc) if self.out: self.out.write(m) self.edit.show() If any other code is needed (i think this is all that is needed) then just let me know. Any Help would be great. Mark

    Read the article

  • Multidimensional array problem in VHDL?

    - by Nektarios
    I'm trying to use a multidimensional array in VHDL and I'm having a lot of trouble getting it to work properly. My issue is that I've got an array of 17, of 16 vectors, of a given size. What I want to do is create 17 registers that are array of 16 * std_logic_vector of 32 bits (which = my b, 512). So, I'm trying to pass in something to input and output on the register instantiation that tells the compiler/synthesizer that I want to pass in something that is 512 bits worth... Similar to in C if I had: int var[COLS][ROWS][ELEMENTS]; memcpy(&var[3].. // I'm talking about 3rd COL here, passing in memory that is ROWS*ELEMENTS long (My actual declaration is here:) type partial_pipeline_registers_type is array (0 to 16, 0 to 15) of std_logic_vector(iw - 1 downto 0); signal h_blk_pipelined_input : partial_pipeline_registers_type; I tried simply using h_blk_pipelined_input(0) .. up to (16) but this doesn't work. I get the following error, which makes me see that I need to double index in to the array: ERROR:HDLParsers:821 - (at the register) Wrong index type for h_blk_pipelined_input. So then I tried what's below, and I get this error: ERROR:HDLParsers:164 - (at the register code). parse error, unexpected TO, expecting COMMA or CLOSEPAR instantiate_h_pipelined_reg : regn generic map ( N=> b, init => bzeros ) port map ( clk => clk , rst => '0', en => '1', input => h_blk_pipelined_input((i - 1), 0 to 15), output=> h_blk_pipelined_input((i), 0 to 15)); -- Changing 0 to 15 to (0 to 15) has no effect... I'm using XST, and from their documentation (http://www.xilinx.com/itp/xilinx6/books/data/docs/xst/xst0067_9.html), the above should have worked: ...declaration: subtype MATRIX15 is array(4 downto 0, 2 downto 0) of STD_LOGIC_VECTOR (7 downto 0); A multi-dimensional array signal or variable can be completely used: Just a slice of one row can be specified: MATRIX15 (4,4 downto 1) <= TAB_B (3 downto 0); One alternative is that I can create more registers that are 16 times smaller, and instead of trying to do all '0 to 15' at once, I would just do that 15 additional times. However, I think this may lead to inefficiency in synthesis and I don't feel like this is the right solution. EDIT: Tried what Ben said, instantiate_h_m_qa_pipeline_registers: for i in 1 to 16 generate instantiate_h_pipelined_reg : regn generic map ( N=> b, init => bzeros ) port map ( clk => clk , rst => '0', en => '1', input => h_blk_pipelined_input(i - 1), output=> h_blk_pipelined_input(i)); end generate instantiate_h_m_qa_pipeline_registers; The signals are now defined as: type std_logic_block is array (0 to 15) of std_logic_vector(iw - 1 downto 0) ; type partial_pipeline_registers_type is array (0 to 16) of std_logic_block; signal h_blk_pipelined_input : partial_pipeline_registers_type; And the error I get from XST is: ERROR:HDLParsers:800 - ((where the register part is)) Type of input is incompatible with type of h_blk_pipelined_input. I'm able to do everything I was able to do before, using ()() syntax instead of ( , ) so I haven't lost anything going this way, but it still doesn't resolve my problem.

    Read the article

  • Sending typedef struct containing void* by creating MPI drived datatype.

    - by hankol
    what I understand studying MPI specification is that an MPI send primitive refer to a memory location (or a send buffer) pointed by the data to be sent and take the data in that location which then passed as a message to the another Process. Though it is true that virtual address of a give process will be meaningless in another process memory address; It is ok to send data pointed by pointer such as void pointer as MPI will any way pass the data itself as a message For example the following works correctly: // Sender Side. int x = 100; void* snd; MPI_Send(snd,4,MPI_BYTE,1,0,MPI_COMM_WORLD); // Receiver Side. void* rcv; MPI_Recv(rcv, 4,MPI_BYTE,0,0,MPI_COMM_WORLD); but when I add void* snd in a struct and try to send the struct this will no succeed. I don't understand why the previous example work correctly but not the following. Here, I have defined a typedef struct and then create an MPI_DataType from it. With the same explanation of the above the following should also have succeed, unfortunately it is not working. here is the code: #include "mpi.h" #include<stdio.h> int main(int args, char *argv[]) { int rank, source =0, tag=1, dest=1; int bloackCount[2]; MPI_Init(&args, &argv); typedef struct { void* data; int tag; } data; data myData; MPI_Datatype structType, oldType[2]; MPI_Status stat; /* MPI_Aint type used to idetify byte displacement of each block (array)*/ MPI_Aint offsets[2], extent; MPI_Comm_rank(MPI_COMM_WORLD, &rank); offsets[0] = 0; oldType[0] = MPI_BYTE; bloackCount[0] = 1; MPI_Type_extent(MPI_INT, &extent); offsets[1] = 4 * extent; /*let say the MPI_BYTE will contain ineteger : size of int * extent */ oldType[1] = MPI_INT; bloackCount[1] = 1; MPI_Type_create_struct(2, bloackCount,offsets,oldType, &structType); MPI_Type_commit(&structType); if(rank == 0){ int x = 100; myData.data = &x; myData.tag = 99; MPI_Send(&myData,1,structType, dest, tag, MPI_COMM_WORLD); } if(rank == 1 ){ MPI_Recv(&myData, 1, structType, source, tag, MPI_COMM_WORLD, &stat); // with out this the following printf() will properly print the value 99 for // myData.tag int x = *(int *) myData.data; printf(" \n Process %d, Received : %d , %d \n\n", rank , myData.tag, x); } MPI_Type_free(&structType); MPI_Finalize(); } Error message running the code: [Looks like I am trying to access an invalid memory address space in the second process] [ubuntu:04123] *** Process received signal *** [ubuntu:04123] Signal: Segmentation fault (11) [ubuntu:04123] Signal code: Address not mapped (1) [ubuntu:04123] Failing at address: 0xbfe008bc [ubuntu:04123] [ 0] [0xb778240c] [ubuntu:04123] [ 1] GenericstructType(main+0x161) [0x8048935] [ubuntu:04123] [ 2] /lib/i386-linux-gnu/libc.so.6(__libc_start_main+0xf3) [0xb750f4d3] [ubuntu:04123] [ 3] GenericstructType() [0x8048741] [ubuntu:04123] *** End of error message *** Can some please explain to me why it is not working. any advice will also be appreciated thanks,

    Read the article

  • C++: Calling class functions within a switch

    - by user1446002
    i've been trying to study for my finals by practicing classes and inheritance, this is what I've come up with so far for inheritance and such however I'm unsure how to fix the error occuring below. #include<iostream> #include<iomanip> #include<cmath> #include<string.h> using namespace std; //BASE CLASS DEFINITION class hero { protected: string name; string mainAttr; int xp; double hp; double mana; double armour; int range; double attkDmg; bool attkType; public: void dumpData(); void getName(); void getMainAttr(); void getAttkData(); void setAttkData(string); void setBasics(string, string, double, double, double); void levelUp(); }; //CLASS FUNCTIONS void hero::dumpData() { cout << "Name: " << name << endl; cout << "Main Attribute: " << mainAttr << endl; cout << "XP: " << xp << endl; cout << "HP: " << hp << endl; cout << "Mana: " << mana << endl; cout << "Armour: " << armour << endl; cout << "Attack Range: " << range << endl; cout << "Attack Damage: " << attkDmg << endl; cout << "Attack Type: " << attkType << endl << endl; } void hero::getName() { cout << "Name: " << name << endl; } void hero::getMainAttr() { cout << "Main Attribute: " << mainAttr << endl; } void hero::getAttkData() { cout << "Attack Range: " << range << endl; cout << "Attack Damage: " << attkDmg << endl; cout << "Attack Type: " << attkType << endl; } void hero::setAttkData(string attr) { int choice = 0; if (attr == "Strength") { choice = 1; } if (attr == "Agility") { choice = 2; } if (attr == "Intelligence") { choice = 3; } switch (choice) { case 1: range = 128; attkDmg = 80.0; attkType = 0; break; case 2: range = 350; attkDmg = 60.0; attkType = 0; break; case 3: range = 600; attkDmg = 35.0; attkType = 1; break; default: break; } } void hero::setBasics(string heroName, string attribute, double health, double mp, double armourVal) { name = heroName; mainAttr = attribute; hp = health; mana = mp; armour = armourVal; } void hero::levelUp() { xp = 0; hp = hp + (hp * 0.1); mana = mana + (mana * 0.1); armour = armour + ((armour*0.1) + 1); attkDmg = attkDmg + (attkDmg * 0.05); } //INHERITED CLASS DEFINITION class neutHero : protected hero { protected: string drops; int xpGain; public: int giveXP(int); void dropItems(); }; //INHERITED CLASS FUNCTIONS int neutHero::giveXP(int exp) { xp += exp; } void neutHero::dropItems() { cout << name << " has dropped the following items: " << endl; cout << drops << endl; } /* END OF OO! */ //FUNCTION PROTOTYPES void dispMenu(); int main() { int exit=0, choice=0, mainAttrChoice=0, heroCreated=0; double health, mp, armourVal; string heroName, attribute; do { dispMenu(); cin >> choice; switch (choice) { case 1: system("cls"); cout << "Please enter your hero name: "; cin >> heroName; cout << "\nPlease enter your primary attribute\n"; cout << "1. Strength\n" << "2. Agility\n" << "3. Intelligence\n"; cin >> mainAttrChoice; switch (mainAttrChoice) { case 1: attribute = "Strength"; health = 750; mp = 150; armourVal = 2; break; case 2: attribute = "Agility"; health = 550; mp = 200; armourVal = 6; break; case 3: attribute = "Intelligence"; health = 450; mp = 450; armourVal = 1; break; default: cout << "Choice invalid, please try again."; exit = 1; break; hero player; player.setBasics(heroName, attribute, health, mp, armourVal); player.setAttkData(attribute); heroCreated=1; system("cls"); cout << "Your hero has been created!\n\n"; player.dumpData(); system("pause"); break; } case 2: system("cls"); if (heroCreated == 1) { cout << "Your hero has been detailed below.\n\n"; **player.dumpData(); //ERROR OCCURS HERE !** system("pause"); } else { cout << "You have not created a hero please exit this prompt " "and press 1 on the menu to create a hero."; } break; case 3: system("cls"); cout << "Still Under Development"; system("pause"); break; case 4: system("cls"); exit = 1; break; default: cout << "Your command has not been recognised, please try again.\n"; system("pause"); break; } } while (exit != 1); system("pause"); return 0; } void dispMenu() { system("cls"); cout << "1. Create New Hero\n" "2. View Current Hero\n" "3. Fight Stuff\n" "4. Exit\n\n" "Enter your choice: "; } However upon compilation I get the following errors: 220 `player' undeclared (first use this function) Unsure exactly how to fix it as I've only recently started using OO approach. The error has a comment next to it above and is in case 2 in the main. Cheers guys.

    Read the article

  • Airtel 3G in Chennai – User experience, Price & What’s the catch?

    - by Boonei
    Finally ! Here we are with Airtel 3G in India. Now Airtel customers can have a go at real 3G speed. Sources suggest that the delay in rolling out 3G was due to hardware problems. It was provided by Ericsson. Now first things first. Let me get to the point. I had subscribed to Airtel’s 3G pack Rs.100 for 100 MB. This is to check out how good it is, did not want to pay a hefty sum at the first instance. It was pretty smooth upgrading.. After the upgrade I did see the much awaited 3G signal bar on my phone. Ok! now its testing time. User experience First I did a bit of browsing, boy ! it was pretty quick, web pages loaded in a jiffy. I really did not time it because it loaded really quick. I loaded a YouTube Video, no buffering, watched the 4 min Video with no problems, it took around 6 MB of data usage Made a Skype call for about 6 min, voice clarity was really good and data usage was around 4-5 MB Tried Google Maps everything was so fast could not see the difference between computer and my phone, used it for about couple of minutes. Did listen to an Online Radio for about 5 min took about 8 MB of data usage Guess there is no need to say about Facebook or Twitter. It was good obviously. Video Call – Not yet tested Price – Do you get what you pay for ? 3G speed is fantastic, you have to really feel it to enjoy it. But currently in Airtel, 3G is available only in 3 places wiz. Bengaluru, Chennai, Coimbatore. ok ! Its not even there in all the metros? hmmm. 3G signal was not available in all parts of Chennai, often in many places it changed to 2G. Let alone all the places, even in my house when walking from one room to another sometimes its shows 2G. When it chaged from 3G to 2G there was lag in the application when it was loading data which often made me wonder if the application hanged. Currently prices not low. 2G plans in Airtel is Rs.98 for 2GB and for Rs.100 its only 100MB in 3G. Now you decide please, it’s quite a debate. The Catch – There is always a catch right ? If you have bought 3G connection and in places where 3G is not available (2G) and use any application that requires data connections (youtube, browse, chat etc) its changed with 3G!. Meaning if you have bought 100MB of 3G by paying Rs.100 like I did, suppose you used the connection for about 10MB using 2G, then it would reduce from the 100MB to 90 MB….That’s bad ! You cannot have 2G and 3G plans activated at the same point of time in your phone. You will pay 3G price for using 2G. This article titled,Airtel 3G in Chennai – User experience, Price & What’s the catch?, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

    Read the article

  • Slow wifi on Ubuntu 12.04 wifi driver ath9k

    - by lunar
    For the last couple of days my wifi connection is extremely slow. I am pretty sure that it is caused by the driver. Can this be improved? lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"MyWiFi" Mode:Managed Frequency:2.437 GHz Access Point: 00:18:68:FE:7B:C7 Bit Rate=58.5 Mb/s Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=48/70 Signal level=-62 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:6960 Missed beacon:0 eth0 no wireless extensions. sudo lshw -class network *-network description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 01 serial: 74:f0:6d:34:c2:4e width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-31-generic-pae firmware=N/A ip=192.168.1.2 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:d7400000-d740ffff *-network description: Ethernet interface product: AR8131 Gigabit Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:06:00.0 logical name: eth0 version: c0 serial: 48:4b:38:78:f6:ae capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI firmware=N/A latency=0 link=no multicast=yes port=twisted pair resources: irq:51 memory:d3800000-d383ffff ioport:8000(size=128) lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 04f2:b1bb Chicony Electronics Co., Ltd Bus 001 Device 004: ID 0b05:1788 ASUSTek Computer, Inc. lspci 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18) 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 18) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06) 00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 06) 00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 06) 00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 06) 00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 06) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 425M] (rev a1) 03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) 04:00.0 USB controller: Fresco Logic Device 1400 (rev 01) 06:00.0 Ethernet controller: Atheros Communications Inc. AR8131 Gigabit Ethernet (rev c0) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 05) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 05) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 05) rfkill list all 0: hci0: Bluetooth Soft blocked: yes Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: no

    Read the article

  • how do i fix this: the networking and wireless are enabled. but list of networks under wireless networks not available

    - by Ayesha Ahmad
    i started working with ubuntu 11.10 last year. i upgraded to 12.04 a week back. since then i have had all sorts of problems with network connection. first had to install the new driver. the hardware switch somehow got disabled then the above problem arrived. even tho the options are all enabled, the OS is not able to detect scan available network connections. also i have to bring to notice that once in a while it does get connected, can not explain how it happens. I want to fix this problem once and for all. please help. ifconfig: eth0 Link encap:Ethernet HWaddr f0:4d:a2:51:b3:c8 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:44 eth1 Link encap:Ethernet HWaddr 1c:65:9d:67:d5:e1 inet6 addr: fe80::1e65:9dff:fe67:d5e1/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:170 TX packets:0 errors:27 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:344 errors:0 dropped:0 overruns:0 frame:0 TX packets:344 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:20336 (20.3 KB) TX bytes:20336 (20.3 KB) lshw -c network *-network description: Wireless interface product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: eth1 version: 01 serial: 1c:65:9d:67:d5:e1 width: 64 bits clock: 33MHz capabilities: bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 latency=0 multicast=yes wireless=IEEE 802.11 resources: irq:17 memory:f0500000-f0503fff *-network description: Ethernet interface product: AR8152 v1.1 Fast Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:04:00.0 logical name: eth0 version: c1 serial: f0:4d:a2:51:b3:c8 capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI firmware=N/A latency=0 multicast=yes port=twisted pair resources: irq:44 memory:f0400000-f043ffff ioport:2000(size=128) iwconfig lo no wireless extensions. eth1 IEEE 802.11 Access Point: Not-Associated Link Quality:5 Signal level:0 Noise level:196 Rx invalid nwid:0 invalid crypt:0 invalid misc:0 eth0 no wireless extensions. lspci 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06) 00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 06) 00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 06) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06) 03:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) 04:00.0 Ethernet controller: Atheros Communications Inc. AR8152 v1.1 Fast Ethernet (rev c1) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 05) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 05) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 05) I hope this information is of some help.

    Read the article

  • SQL Server IO handling mechanism can be severely affected by high CPU usage

    - by sqlworkshops
    Are you using SSD or SAN / NAS based storage solution and sporadically observe SQL Server experiencing high IO wait times or from time to time your DAS / HDD becomes very slow according to SQL Server statistics? Read on… I need your help to up vote my connect item – https://connect.microsoft.com/SQLServer/feedback/details/744650/sql-server-io-handling-mechanism-can-be-severely-affected-by-high-cpu-usage. Instead of taking few seconds, queries could take minutes/hours to complete when CPU is busy.In SQL Server when a query / request needs to read data that is not in data cache or when the request has to write to disk, like transaction log records, the request / task will queue up the IO operation and wait for it to complete (task in suspended state, this wait time is the resource wait time). When the IO operation is complete, the task will be queued to run on the CPU. If the CPU is busy executing other tasks, this task will wait (task in runnable state) until other tasks in the queue either complete or get suspended due to waits or exhaust their quantum of 4ms (this is the signal wait time, which along with resource wait time will increase the overall wait time). When the CPU becomes free, the task will finally be run on the CPU (task in running state).The signal wait time can be up to 4ms per runnable task, this is by design. So if a CPU has 5 runnable tasks in the queue, then this query after the resource becomes available might wait up to a maximum of 5 X 4ms = 20ms in the runnable state (normally less as other tasks might not use the full quantum).In case the CPU usage is high, let’s say many CPU intensive queries are running on the instance, there is a possibility that the IO operations that are completed at the Hardware and Operating System level are not yet processed by SQL Server, keeping the task in the resource wait state for longer than necessary. In case of an SSD, the IO operation might even complete in less than a millisecond, but it might take SQL Server 100s of milliseconds, for instance, to process the completed IO operation. For example, let’s say you have a user inserting 500 rows in individual transactions. When the transaction log is on an SSD or battery backed up controller that has write cache enabled, all of these inserts will complete in 100 to 200ms. With a CPU intensive parallel query executing across all CPU cores, the same inserts might take minutes to complete. WRITELOG wait time will be very high in this case (both under sys.dm_io_virtual_file_stats and sys.dm_os_wait_stats). In addition you will notice a large number of WAITELOG waits since log records are written by LOG WRITER and hence very high signal_wait_time_ms leading to more query delays. However, Performance Monitor Counter, PhysicalDisk, Avg. Disk sec/Write will report very low latency times.Such delayed IO handling also occurs to read operations with artificially very high PAGEIOLATCH_SH wait time (with number of PAGEIOLATCH_SH waits remaining the same). This problem will manifest more and more as customers start using SSD based storage for SQL Server, since they drive the CPU usage to the limits with faster IOs. We have a few workarounds for specific scenarios, but we think Microsoft should resolve this issue at the product level. We have a connect item open – https://connect.microsoft.com/SQLServer/feedback/details/744650/sql-server-io-handling-mechanism-can-be-severely-affected-by-high-cpu-usage - (with example scripts) to reproduce this behavior, please up vote the item so the issue will be addressed by the SQL Server product team soon.Thanks for your help and best regards,Ramesh MeyyappanHome: www.sqlworkshops.comLinkedIn: http://at.linkedin.com/in/rmeyyappan

    Read the article

  • No external microphone Acer AO722

    - by Leeghwater
    The ACER AO722 comes with an external mic input, and this input is not recognised by Alsa mixer or Sound (in System Settings). There are various comments on this problem, but no real solutions. For example External Mic not working but Internal Mic works on an Acer Aspiron AO722. Using the internal mic is not an option, as I need to use skype professionally. I have tried everything in alsamixer (accessible through the Terminal Ctrl+Alt+t, command: alsamixer), and in Sound (under System Settings). I have also installed Pulseaudio. But to no avail. The headset is working normally under Skype in Windows. My AO722 came with Windows 7 on it, so I have installed Skype there too. My headset has separate connectors for ears and mic, and these go into the respective output and input on the right side of the laptop. This location: http://bernaerts.dyndns.org/linux/202-ubuntu-acer-ao722 sounds like an effective solution but it is for Ubuntu Natty 11.04. The solution suggested sounds drastic to me: replace the kernel 2.6.38-13 with version 2.6.38-12. I use Ubuntu 12.04, and my kernel is 3.2.0-30-generic-pae. Question: could I try this solution with Ubuntu 12.04? Is this a risky thing to do? I have found harware work around this problem. The audio output seems to be a combi output with also a microphone connection. I have made an adapter for this output. I used a 4 contacts 3,5 mm audio jack plug. To this plug I have soldered 2 female (common stereo) connectors, one for ears and one for the mic of my headset. The 4 contacts jack, which goes into the laptop (in audio OUTput) is wired as follows: tip = hot audio right; first sleeve after tip = hot audio left; second sleeve = common earth (for both ears and microphone); the 3rd sleeve = microphone signal input. In the connector which I could buy, the 3rd sleeve is not so much a sleeve, but part of the metal base of the connector; normally you would expect this one to be connect to earth. But connecting the mic signal to it works. Maybe ready made adapters of this kind and even headsets with a combi jack can simply be purchased; I didn't check. When I plug in the 4 contacts jack, Sound and Alsamixer immediately recognise an external microphone (even if no mic is connected to the adapter). In Sound, under the Input tab, 'Settings for internal microphone' changes into 'Setting for microphone'. The microphone comes through loud and clear, however there is a constant noise in the background. Others have reported this too. If I disconnect the external mic from the adapter, or shortcircuit the external microphone, the noise gets less but does not disappear. Therefore, it is not background noise from the room, but it comes from the computer itself. However, if you talk directly in the microphone of the headset, the noise level is acceptable for VOIP. The headset of my mobile phone Nokia C1 mobile comes wwith a 4 contacts combi 3,5mm jack plug. However, this one works (ear and mic) with the AO722 only if not inserted fully. Possibly the wiring of this headset jack is different. I cannot find detailed specs of the AO722, and don't know whether the audio 'output' was actually designed as a combi input/output. I have seen that at least one other AO model has a combi connector only. In any case, I do not believe that connecting your headset in this way will harm your computer. I would still appreciate a software solution. This must be possible, because the proper microphone input connector works under MS Windows.

    Read the article

  • Randomely loosing wireless connexion with Cubuntu 12.04

    - by statquant
    I am presently experiencing random disconnections from my wireless network. It looks like it is more and more frequent (however I have not seen any clear pattern). This is killing me... Here is some information that should help (from ubuntu forums). Thanks for reading Machine : Acer Aspire S3 statquant@euclide:~$ lsb_release -d Description: Ubuntu 12.04.1 LTS statquant@euclide:~$ uname -mr 3.2.0-33-generic x86_64 statquant@euclide:~$ sudo /etc/init.d/networking restart * Running /etc/init.d/networking restart is deprecated because it may not enable again some interfaces * Reconfiguring network interfaces... statquant@euclide:~$ lspci 02:00.0 Network controller: Atheros Communications Inc. AR9485 Wireless Network Adapter (rev 01) statquant@euclide:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 004: ID 064e:c321 Suyin Corp. Bus 002 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. statquant@euclide:~$ ifconfig wlan0 Link encap:Ethernet HWaddr 74:de:2b:dd:c4:78 inet addr:192.168.1.3 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::76de:2bff:fedd:c478/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:913 errors:0 dropped:0 overruns:0 frame:0 TX packets:802 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:873218 (873.2 KB) TX bytes:125826 (125.8 KB) statquant@euclide:~$ iwconfig wlan0 IEEE 802.11bgn ESSID:"Bbox-D646D1" Mode:Managed Frequency:2.437 GHz Access Point: 00:19:70:80:01:6C Bit Rate=65 Mb/s Tx-Power=16 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:on Link Quality=56/70 Signal level=-54 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:71 Missed beacon:0 statquant@euclide:~$ dmesg | grep "wlan" [ 17.495866] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 17.498950] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 20.072015] wlan0: authenticate with 00:19:70:80:01:6c (try 1) [ 20.269853] wlan0: authenticate with 00:19:70:80:01:6c (try 2) [ 20.272386] wlan0: authenticated [ 20.298682] wlan0: associate with 00:19:70:80:01:6c (try 1) [ 20.302321] wlan0: RX AssocResp from 00:19:70:80:01:6c (capab=0x431 status=0 aid=1) [ 20.302325] wlan0: associated [ 20.307307] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 30.402292] wlan0: no IPv6 routers present statquant@euclide:~$ sudo lshw -C network [sudo] password for statquant: *-network description: Wireless interface product: AR9485 Wireless Network Adapter vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 01 serial: 74:de:2b:dd:c4:78 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list rom ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-33-generic firmware=N/A ip=192.168.1.3 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:c0400000-c047ffff memory:afb00000-afb0ffff statquant@euclide:~$ iwlist scan wlan0 Scan completed : Cell 01 - Address: 00:19:70:80:01:6C Channel:6 Frequency:2.437 GHz (Channel 6) Quality=56/70 Signal level=-54 dBm Encryption key:on ESSID:"Bbox-D646D1" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 9 Mb/s; 12 Mb/s; 18 Mb/s Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s Mode:Master Extra:tsf=000000125fb152bb Extra: Last beacon: 40020ms ago IE: Unknown: 000B42626F782D443634364431 IE: Unknown: 010882848B960C121824 IE: Unknown: 030106 IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: Unknown: 2A0100 IE: Unknown: 32043048606C IE: Unknown: DD180050F2020101820003A4000027A4000042435E0062322F00 IE: Unknown: 2D1A4C101BFF00000000000000000000000000000000000000000000 IE: Unknown: 3D1606080800000000000000000000000000000000000000 IE: Unknown: DD0900037F01010000FF7F IE: Unknown: DD0A00037F04010000000000 And... finally, please note that I did the following (after looking for fixes of similar problems), but unfortunately it did not work sudo modprobe -r iwlwifi sudo modprobe iwlwifi 11n_disable=1

    Read the article

  • Detect user logout / shutdown in Python / GTK under Linux

    - by Ivo Wetzel
    OK this is presumably a hard one, I've got an pyGTK application that has random crashes due to X Window errors that I can't catch/control. So I created a wrapper that restarts the app as soon as it detects a crash, now comes the problem, when the user logs out or shuts down the system, the app exits with status 1. But on some X errors it does so too. So I tried literally anything to catch the shutdown/logout, with no success, here's what I've tried: import pygtk import gtk import sys class Test(gtk.Window): def delete_event(self, widget, event, data=None): open("delete_event", "wb") def destroy_event(self, widget, data=None): open("destroy_event", "wb") def destroy_event2(self, widget, event, data=None): open("destroy_event2", "wb") def __init__(self): gtk.Window.__init__(self, gtk.WINDOW_TOPLEVEL) self.show() self.connect("delete_event", self.delete_event) self.connect("destroy", self.destroy_event) self.connect("destroy-event", self.destroy_event2) def foo(): open("add_event", "wb") def ex(): open("sys_event", "wb") from signal import * def clean(sig): f = open("sig_event", "wb") f.write(str(sig)) f.close() exit(0) for sig in (SIGABRT, SIGILL, SIGINT, SIGSEGV, SIGTERM): signal(sig, lambda *args: clean(sig)) def at(): open("at_event", "wb") import atexit atexit.register(at) f = Test() sys.exitfunc = ex gtk.quit_add(gtk.main_level(), foo) gtk.main() open("exit_event", "wb") Not one of these succeeds, is there any low level way to detect the system shutdown? Google didn't find anything related to that. I guess there must be a way, am I right? :/

    Read the article

  • Play mp3 using Python, PyQt, and Phonon

    - by KeyboardInterrupt
    I been trying all day to figure out the Qt's Phonon library with Python. My long term goal is to see if I could get it to play a mms:// stream, but since I can't find an implementation of this done anywhere, I will figure that part out myself. (figured I'd put it out there if anyone knew more about this specifically, if not no big deal.) Anyway, I figured I'd work backwards from a working example I found online. This launches a file browser and will play the mp3 file specified. I wanted to strip out the file browser stuff and get it down to the essentials of executing the script and having it play an Mp3 file with a hardcoded path. I'm assuming my problem is a misunderstanding of setCurrentSource() and specifying the data types. (see: http://www.riverbankcomputing.co.uk/static/Docs/PyQt4/html/phonon-mediasource.html#fileName) I'm keeping my question kind of broad because ANY help with understanding Phonon would be greatly appreciated. import sys from PyQt4.QtGui import QApplication, QMainWindow, QDirModel, QColumnView from PyQt4.QtGui import QFrame from PyQt4.QtCore import SIGNAL from PyQt4.phonon import Phonon class MainWindow(QMainWindow): m_model = QDirModel() def __init__(self): QMainWindow.__init__(self) self.m_fileView = QColumnView(self) self.m_media = None self.setCentralWidget(self.m_fileView) self.m_fileView.setModel(self.m_model) self.m_fileView.setFrameStyle(QFrame.NoFrame) self.connect(self.m_fileView, SIGNAL("updatePreviewWidget(const QModelIndex &)"), self.play) def play(self, index): self.delayedInit() self.m_media.setCurrentSource( Phonon.MediaSource(self.m_model.filePath(index))) self.m_media.play() def delayedInit(self): if not self.m_media: self.m_media = Phonon.MediaObject(self) audioOutput = Phonon.AudioOutput(Phonon.MusicCategory, self) Phonon.createPath(self.m_media, audioOutput) def main(): app = QApplication(sys.argv) QApplication.setApplicationName("Phonon Tutorial 2 (Python)") mw = MainWindow() mw.show() sys.exit(app.exec_()) if __name__ == '__main__': main()

    Read the article

  • QWebView not loading external resources

    - by Nick
    Hi. I'm working on a kiosk web browser using Qt and PyQt4. QWebView seems to work quite well except for one quirk. If a URL fails to load for any reason, I want to redirect the user to a custom error page. I've done this using the loadFinished() signal to check the result, and change the URL to the custom page if necessary using QWebView.load(). However, any page I attempt to load here fails to pull in external resources like CSS or images. Using QWebView.load() to set the initial page at startup seems to work fine, and clicking any link on the custom error page will result in the destination page loading fine. It's just the error page that doesn't work. I'm really not sure where to go next. I've included the source for an app that will replicate the problem below. It takes a URL as a command line argument - a valid URL will display correctly, a bad URL (eg. DNS resolution fails) will redirect to Google, but with the logo missing. import sys from PyQt4 import QtGui, QtCore, QtWebKit class MyWebView(QtWebKit.QWebView): def __init__(self, parent=None): QtWebKit.QWebView.__init__(self, parent) self.resize(800, 600) self.load(QtCore.QUrl(sys.argv[1])) self.connect(self, QtCore.SIGNAL('loadFinished(bool)'), self.checkLoadResult) def checkLoadResult(self, result): if (result == False): self.load(QtCore.QUrl('http://google.com')) app = QtGui.QApplication(sys.argv) main = MyWebView() main.show() sys.exit(app.exec_()) If anyone could offer some advice it would be greatly appreciated.

    Read the article

  • QTcpServer not emiting signals

    - by Timothy Baldridge
    Okay, I'm sure this is simple, but I'm not seeing it: HTTPServer::HTTPServer(QObject *parent) : QTcpServer(parent) { connect(this, SIGNAL(newConnection()), this, SLOT(acceptConnection())); } void HTTPServer::acceptConnection() { qDebug() << "Got Connection"; QTcpSocket *clientconnection = this->nextPendingConnection(); connect(clientconnection, SIGNAL(disconnected()), clientconnection, SLOT(deleteLater())); HttpRequest *req = new HttpRequest(clientconnection, this); req->processHeaders(); delete req; } int main(int argc, char *argv[]) { QCoreApplication a(argc, argv); HTTPServer http(0); http.listen(QHostAddress::Any, 8011); qDebug() << "Started: " << http.isListening() << http.serverAddress() << ":" << http.serverPort(); return a.exec(); } According to the docs my acceptConnection() slot should be called whenever there is a new connection. I can connect into this tcp port with a browser or telnet, and I don't get any errors, so I know it's listening, execution never goes to my acceptConnection() function? And yes my objects inherit from QObject, I've just stripped the code down to the essential parts above. There's no build errors....

    Read the article

  • PyQt and unittest - how to handle signals and slots

    - by Einar
    Hello, some small application I'm developing uses a module I have written to check certain web services via a REST API. I've been trying to add unit tests to it so I don't break stuff, and I stumbled upon a problem. I use a lot of signal-slot connections to perform operations asynchronously. For example a typical test would be (pseudo-Python), with postDataDownloaded as a signal: def testConnection(self): "Test connection and posts retrieved" def length_test(): self.assertEqual(len(self.client.post_data), 5) self.client.postDataReady.connect(length_test) self.client.get_post_list(limit=5) Now, unittest will report this test to be "ok" when running, regardless of the result (as another slot is being called), even if asserts fail (I will get an unhandled AssertionError). Example when deliberatiely making the test fail: Test connection and posts retrieved ... ok [... more tests...] OK Traceback (most recent call last): [...] AssertionError: 4 != 5 The slot inside the test is merely an experiment: I get the same results if it's outside (instance method). I also have to add that the various methods I'm calling all make HTTP requests, which means they take a bit of time (I need to mock the request - in the mean time I'm using SimpleHTTPServer to fake the connections and give them proper data). Is there a way around this problem?

    Read the article

  • Qt, no such slot error

    - by Martin Beckett
    I'm having a strange problem with slots in Qt4.6 I have a tree control that I am trying to fire an event back to the mainwindow to edit something. I have boiled it down to this minimal example: class MainWindow : public QMainWindow { Q_OBJECT public: MainWindow(int argc, char **argv ); private Q_SLOTS: void about() {QMessageBox::about(this, "about","about"); } // Just the defaul about box void doEditFace() {QMessageBox::about(this, "test","doEditFace"); } // pretty identical .... } class TreeModel : public QAbstractItemModel { Q_OBJECT Q_SIGNALS: void editFace(); ... } In my Mainwindow() I have connect(treeModel, SIGNAL(editFace()), this, SLOT(about())); // returns true connect(treeModel, SIGNAL(editFace()), this, SLOT(doEditFace())); // returns false When I run it the second line gives a warning. Object::connect: No such slot MainWindow::doEditFace() in \src\mainwindow.cpp:588 As far as I can see the doEditFace() is in the moc_ qmeta class perfectly correctly. And the edit event fires and pops up the about box. The order doesn't matterm if I connect the about box second it still works but my slot doesnt! vS2008 windowsXP qt4.6.2

    Read the article

  • iPhone app memory leak with UIImage animation? Problem testing on device

    - by user157733
    I have an animation which works fine in the simulator but crashes on the device. I am getting the following error... Program received signal: “0”. The Debugger has exited due to signal 10 (SIGBUS) A bit of investigating suggests that the UIImages are not getting released and I have a memory leak. I am new to this so can someone tell me if this is the likely cause? If you could also tell me how to solve it then that would be amazing. The images are 480px x 480px and about 25kb each. My code is below... NSArray *rainImages = [NSArray arrayWithObjects: [UIImage imageNamed:@"rain-loop0001.png"], [UIImage imageNamed:@"rain-loop0002.png"], [UIImage imageNamed:@"rain-loop0003.png"], [UIImage imageNamed:@"rain-loop0004.png"], [UIImage imageNamed:@"rain-loop0005.png"], [UIImage imageNamed:@"rain-loop0006.png"], //more looping images [UIImage imageNamed:@"rain-loop0045.png"], [UIImage imageNamed:@"rain-loop0046.png"], [UIImage imageNamed:@"rain-loop0047.png"], [UIImage imageNamed:@"rain-loop0048.png"], [UIImage imageNamed:@"rain-loop0049.png"], [UIImage imageNamed:@"rain-loop0050.png"], nil]; rainImage.animationImages = rainImages; rainImage.animationDuration = 4.15/2; rainImage.animationRepeatCount = 0; [rainImage startAnimating]; [rainImage release]; Thanks

    Read the article

  • What are alternatives to Win32 PulseEvent() function?

    - by Bill
    The documentation for the Win32 API PulseEvent() function (kernel32.dll) states that this function is “… unreliable and should not be used by new applications. Instead, use condition variables”. However, condition variables cannot be used across process boundaries like (named) events can. I have a scenario that is cross-process, cross-runtime (native and managed code) in which a single producer occasionally has something interesting to make known to zero or more consumers. Right now, a well-known named event is used (and set to signaled state) by the producer using this PulseEvent function when it needs to make something known. Zero or more consumers wait on that event (WaitForSingleObject()) and perform an action in response. There is no need for two-way communication in my scenario, and the producer does not need to know if the event has any listeners, nor does it need to know if the event was successfully acted upon. On the other hand, I do not want any consumers to ever miss any events. In other words, the system needs to be perfectly reliable – but the producer does not need to know if that is the case or not. The scenario can be thought of as a “clock ticker” – i.e., the producer provides a semi-regular signal for zero or more consumers to count. And all consumers must have the correct count over any given period of time. No polling by consumers is allowed (performance reasons). The ticker is just a few milliseconds (20 or so, but not perfectly regular). Raymen Chen (The Old New Thing) has a blog post pointing out the “fundamentally flawed” nature of the PulseEvent() function, but I do not see an alternative for my scenario from Chen or the posted comments. Can anyone please suggest one? Please keep in mind that the IPC signal must cross process boundries on the machine, not simply threads. And the solution needs to have high performance in that consumers must be able to act within 10ms of each event.

    Read the article

  • Break on EXC_BAD_ACCESS in XCode?

    - by jasonh
    I'm new to iPhone development and XCode in general and have no idea how to begin troubleshooting an EXC_BAD_ACCESS signal. How can I get XCode to break at the exact line that is causing the error? I can't seem to get XCode to stop on the line causing the problem, but I do see the following lines in my debug console: Sun Oct 25 15:12:14 jasonsmacbook TestProject[1289] : CGContextSetStrokeColorWithColor: invalid context Sun Oct 25 15:12:14 jasonsmacbook TestProject[1289] : CGContextSetLineWidth: invalid context Sun Oct 25 15:12:14 jasonsmacbook TestProject[1289] : CGContextAddPath: invalid context Sun Oct 25 15:12:14 jasonsmacbook TestProject[1289] : CGContextDrawPath: invalid context 2009-10-25 15:12:14.680 LanderTest[1289:207] *** -[CFArray objectAtIndex:]: message sent to deallocated instance 0x3c4e610 Now, I am attempting to draw to the context I retrieve from UIGraphicsGetCurrentContext() and pass to the object that I want to draw with. Further trial and error debugging and I found that an NSMutableArray I have a property for on my class was a zombie. I went into the init function for the class and here's the code I was using: if ((self = [super init])) { NSMutableArray *array = [NSMutableArray array]; self.terrainBlocks = array; [array release]; } return self; } I removed the [array release] line and it no longer gives me the EXC_BAD_ACCESS signal, but I'm now confused about why this works. I thought that when I used the property, it automatically retained it for me, and thus I should release it from within init so that I don't have a leak. I'm thoroughly confused about how this works and all the guides and Stackoverflow questions I've read only confuse me more about how to set properties within my init method. There seems to be no consensus as to which way is the best.

    Read the article

  • Small-o(n^2) implementation of Polynomial Multiplication

    - by AlanTuring
    I'm having a little trouble with this problem that is listed at the back of my book, i'm currently in the middle of test prep but i can't seem to locate anything regarding this in the book. Anyone got an idea? A real polynomial of degree n is a function of the form f(x)=a(n)x^n+?+a1x+a0, where an,…,a1,a0 are real numbers. In computational situations, such a polynomial is represented by a sequence of its coefficients (a0,a1,…,an). Assuming that any two real numbers can be added/multiplied in O(1) time, design an o(n^2)-time algorithm to compute, given two real polynomials f(x) and g(x) both of degree n, the product h(x)=f(x)g(x). Your algorithm should **not** be based on the Fast Fourier Transform (FFT) technique. Please note it needs to be small-o(n^2), which means it complexity must be sub-quadratic. The obvious solution that i have been finding is indeed the FFT, but of course i can't use that. There is another method that i have found called convolution, where if you take polynomial A to be a signal and polynomial B to be a filter. A passed through B yields a shifted signal that has been "smoothed" by A and the resultant is A*B. This is supposed to work in O(n log n) time. Of course i am completely unsure of implementation. If anyone has any ideas of how to achieve a small-o(n^2) implementation please do share, thanks.

    Read the article

< Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >