Search Results

Search found 834 results on 34 pages for 'system32'.

Page 32/34 | < Previous Page | 28 29 30 31 32 33 34 | Next Page >

activeX component in axapta

- by Nico

hi folks, i'm struggling with an .net activeX i try to use in ms axapta 2009. using this component on my local machine where it was compiled, it's working quite fine. it can be added as activeX element on a form, the methods and events are listed in the axapta-activeX-explorer and i can interact with it without any problems. but trying to distribute the dll to other clients isn't working as intended. the registration of the dll via regasm /codebase /tlb works properly - getting the message, registration was successful. the component is also listed when selecting an activeX-element to add in ax, but neither functions nor properties are listed. and launching the form results in an errormessage - activeX component CLSID ... not found on system, not installed. the classID is indeed the one, defined in .net. strange things happen, having a look on the task-manager. the activeX-component itself is just a wrapper to interact with a com-application. when launching the ax-form with the not working and _not_installed_!! activeX-thing, the taskmanager shows a new process of the com-application, which is instanciated by the activeX :/ things i tried: using different versions of regasm, eg \Windows\Microsoft.NET\Framework\v2.0.50727 ; C:\Windows\Microsoft.NET\Framework64\v2.0.50727 using new GUIDs in .net, prior removing the old ones from the registry compiling, using different versions of the .net framework doing registration via regasm, regasm /codebase, regasm /codebase /tlb, using a visual-studio-setup running registration via command-line as administrator running setup as administrator running even ax as administrator on client-machine moving dll to a different folder followed by new registration ( windows/system32; ax/client/bin ) installing to GAC ( gacutil /i ) different project-options in visual studio ( COM-Visibility; register for COM-Interop; different targetPlatform ) hoped for the fact, that compiling in visual studio with register for COM-Interop option enabled does something more than just the regasm-registration, i used a registry-monitor-microsoft-tool for logging the registry-activity which happend during compilation. using these logs to create all registry-entries on the target-client in addition didn't work either. any hints or help would be so much appreciated! this thing is blocking me for days now :(

Read the article
PHP5.3 is not working with MySQL5.1 IIS7 Times out

- by Thorn007

I have set up PHP5.3, MySQL5.1, and IIS7 on Window 7 but php doesn't want to work with MySQL. I'm assuming it is a configuration error or an incomplete install on my part. MySQL5.1 is working PHP5.3 is working, phpinfo() shows info and that i have enabled MySQL IIS is setup and using fastCgiModule to run PHP IIS registers php.ini updates port 3306 is firewall free and open to the world php.ini is configured correctly I have added c:\php to the Windows systems PATH In the past I remember moving a file, libmysql.dll, to System32 but I doesn't look like that come with php5.3.1, as the driver comes built in now http://us3.php.net/manual/en/mysqlnd.install.php. (This has been giving me so much trouble I have been documenting my findings on my blog as http://inteldesigner.com/2010/code/having-problems-getting-php5-3-to-work-with-mysql5-1 ) NEED: I need to install PHP manually, don't want to use the quick installer or an older version I need to get PHP5.3 to work with MySQL5.1 so i can install Wordpress2.9 and Drupal7a Any links or suggestion would be great, I have already done everything on the iis web site, nothing is working. I'm guessing they have not updated for new software. BUGS/SOLUTION: The solution is here: http://bugs.php.net/bug.php?id=50172 thanks go to don.raman on the iis.net forums http://forums.iis.net/p/1164911/1933894.aspx SYMPTOMS: The php function mysql_connect() in conjunction with php5.3 locks up sever and returns error 500. (IPv6 is the problem see above link) TEST CODE: <?php $con = mysql_connect("localhost","root","***"); if (!$con) { die('Could not connect: ' . mysql_error()); } // some code mysql_close($con); ?> ERRORS: From Browser: HTTP Error 500.0 - Internal Server Error C:\php\php-cgi.exe - The FastCGI process exceeded configured activity timeout When i run php -f c:\public_html\index.php from the command line i got: PHP Warning: mysql_connect(): [2002] A connection attempt failed because the co nnected party did not (trying to connect via tcp://localhost:3306) in C:\public _html\index.php on line 10 Warning: mysql_connect(): [2002] A connection attempt failed because the connect ed party did not (trying to connect via tcp://localhost:3306) in C:\public_html \index.php on line 10 PHP Warning: mysql_connect(): A connection attempt failed because the connected party did not properly respond after a period of time, or established connectio n failed because connected host has failed to respond. in C:\public_html\index.php on line 10 Warning: mysql_connect(): A connection attempt failed because the connected part y did not properly respond after a period of time, or established connection fai led because connected host has failed to respond. in C:\public_html\index.php on line 10 Could not connect: A connection attempt failed because the connected party did n ot properly respond after a period of time, or established connection failed bec ause connected host has failed to respond. C:\Users\Kevin>

Read the article
CreateProcessAsUser error 1314

- by kampi

Hi! I want create a process under another user. So I use LogonUser and CreateProcessAsUser. But my problem is, that CreatePtocessAsUser always returns the errorcode 1314, which means "A required privilige is not held by the client". So my question is, what I am doing wrong? Or how can i give the priviliges to the handle? (I think the handle should have the privileges, or I am wrong?) Sorry for my english mistakes, but my english knowledge isn't the best :) Plesase help if anyone knows how to correct my application. This a part of my code. STARTUPINFO StartInfo; PROCESS_INFORMATION ProcInfo; TOKEN_PRIVILEGES tp; memset(&ProcInfo, 0, sizeof(ProcInfo)); memset(&StartInfo, 0 , sizeof(StartInfo)); StartInfo.cb = sizeof(StartInfo); HANDLE handle = NULL; if (!OpenProcessToken(GetCurrentProcess(), TOKEN_ALL_ACCESS, &handle)) printf("\nOpenProcessError"); if (!LookupPrivilegeValue(NULL,SE_TCB_NAME, //SE_TCB_NAME, &tp.Privileges[0].Luid)) { printf("\nLookupPriv error"); } tp.PrivilegeCount = 1; tp.Privileges[0].Attributes = SE_PRIVILEGE_ENABLED;//SE_PRIVILEGE_ENABLED; if (!AdjustTokenPrivileges(handle, FALSE, &tp, 0, NULL, 0)) { printf("\nAdjustToken error"); } i = LogonUser(user, domain, password, LOGON32_LOGON_INTERACTIVE, LOGON32_PROVIDER_DEFAULT, &handle); printf("\nLogonUser return : %d",i); i = GetLastError(); printf("\nLogonUser getlast : %d",i); if (! ImpersonateLoggedOnUser(handle) ) printf("\nImpLoggedOnUser!"); i = CreateProcessAsUser(handle, "c:\\windows\\system32\\notepad.exe",NULL, NULL, NULL, true, CREATE_UNICODE_ENVIRONMENT |NORMAL_PRIORITY_CLASS | CREATE_NEW_CONSOLE, NULL, NULL, &StartInfo, &ProcInfo); printf("\nCreateProcessAsUser return : %d",i); i = GetLastError(); printf("\nCreateProcessAsUser getlast : %d",i); CloseHandle(handle); CloseHandle(ProcInfo.hProcess); CloseHandle(ProcInfo.hThread); Thanks in advance!

Read the article
Unable to connect to MS Access database through JDBC on Win 7 64-bit

- by Ninad

Hello. I've been trying to connect to a MS Access 2007 database through JDBC. My JDK is JDK 1.6u18 64-bit and OS is Windows 7 64-bit. But problem is I am unable to create a DSN using Windows\system32\odbcad32.exe because it doesn't show ODBC drivers for MS Access at all, it's only showing drivers for MS SQL Server. When tried to click on Configure for "MS Access Database" (which is an already created DSN, I guess), it first shows error message : "The setup routines for the Microsoft Access Drivers (*.mdb, *.accdb) ODBC Driver could not be found. Please reinstall the driver." And then another message : "Errors found! The specified DSN contains an architecture mismatch between the Driver and Application." I cannot reinstall the MDAC as it doesn't work with Windows 7 (which comes with its own WDAC). The odbcad32.exe in Windows\SysWOW64 does let me create a DSN for MS Access, it shows the drivers installed properly. However, when tried to connect to that DSN through a Java program, I get the following exception : java.sql.SQLException: [Microsoft][ODBC Driver Manager] The specified DSN contains an architecture mismatch between the Driver and Application at sun.jdbc.odbc.JdbcOdbc.createSQLException(Unknown Source) at sun.jdbc.odbc.JdbcOdbc.standardError(Unknown Source) at sun.jdbc.odbc.JdbcOdbc.SQLDriverConnect(Unknown Source) at sun.jdbc.odbc.JdbcOdbcConnection.initialize(Unknown Source) at sun.jdbc.odbc.JdbcOdbcDriver.connect(Unknown Source) at java.sql.DriverManager.getConnection(Unknown Source) at java.sql.DriverManager.getConnection(Unknown Source) at AccessTest.main(AccessTest.java:19) What might be the problem and what do I have to do to get it working? My OS as well as JDK are 64-bit. Can't I connect to a Access 2007 database, which I presume is 32-bit? Any help would be highly appreciated. Also, in case one thinks this's not a right place for this question, I apologize in advance. Then please guide me to appropriate forum. Another option would be to find a third-party JDBC driver for MS Access. But I do need to know what's wrong with my configuration. :-/ PS : I know there're many better databases available out there, but for few unfortunate reasons, I have to use MS Access only and have to get it working.

Read the article
Establishing connection from java to access 2010 64bit

- by user993250

after going through several tutorials and blog posts, i have unsuccessfully tried to set up a connection from java to a microsoft access database. my system specifications are win 7 [64 bit] odbcad32.ese [64 bit] access 2010 [64 bit] jre6 [64 bit] the code that i wrote for establishing a connection public Connection makeConn() throws ClassNotFoundException, SQLException { Class.forName("sun.jdbc.odbc.JdbcOdbcDriver"); conn = DriverManager.getConnection("jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=C:\\Users\\ARIFAH\\Desktop\\sampleDb.mdb"); return conn; } in the data source [odbc]---[located at path %windir%\system32\odbcad32.exe] i performed the following task USER DNS TAB ADD-Microsoft Access Driver (*.mdb, *.accdb ) [file ACEODBC.dll] -Finish Data Source Name: TestDriver ; Description: test driver for access 2010 64 bit ; DataBase-select -browse: C:\Users\ARIFAH\Desktop\sampleDb.mdb - ok apply ok now when i try to run my application, this is the error that i m getting, java.sql.SQLException: [Microsoft][ODBC Microsoft Access Driver] Could not find file '(unknown)'. at sun.jdbc.odbc.JdbcOdbc.createSQLException(Unknown Source) at sun.jdbc.odbc.JdbcOdbc.standardError(Unknown Source) at sun.jdbc.odbc.JdbcOdbc.SQLDriverConnect(Unknown Source) at sun.jdbc.odbc.JdbcOdbcConnection.initialize(Unknown Source) at sun.jdbc.odbc.JdbcOdbcDriver.connect(Unknown Source) at java.sql.DriverManager.getConnection(Unknown Source) at java.sql.DriverManager.getConnection(Unknown Source) at dataBase.connection.makeConn(connection.java:22) at newmodulewizrd.ui.App.<init>(App.java:32) at archetypedcomponent.commands.newModuleHandler.execute(newModuleHandler.java:39) at org.eclipse.ui.internal.handlers.HandlerProxy.execute(HandlerProxy.java:294) at org.eclipse.core.commands.Command.executeWithChecks(Command.java:476) at org.eclipse.core.commands.ParameterizedCommand.executeWithChecks(ParameterizedCommand.java:508) at org.eclipse.ui.internal.handlers.HandlerService.executeCommand(HandlerService.java:169) at org.eclipse.ui.internal.handlers.SlaveHandlerService.executeCommand(SlaveHandlerService.java:241) at org.eclipse.ui.internal.handlers.SlaveHandlerService.executeCommand(SlaveHandlerService.java:241) at org.eclipse.ui.menus.CommandContributionItem.handleWidgetSelection(CommandContributionItem.java:770) at org.eclipse.ui.menus.CommandContributionItem.access$10(CommandContributionItem.java:756) at org.eclipse.ui.menus.CommandContributionItem$5.handleEvent(CommandContributionItem.java:746) at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84) at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1003) at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3910) at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3503) at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2405) at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2369) at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2221) at org.eclipse.ui.internal.Workbench$5.run(Workbench.java:500) at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332) at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:493) at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149) at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:113) at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:194) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:368) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source) at java.lang.reflect.Method.invoke(Unknown Source) at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:559) at org.eclipse.equinox.launcher.Main.basicRun(Main.java:514) at org.eclipse.equinox.launcher.Main.run(Main.java:1311) at org.eclipse.equinox.launcher.Main.main(Main.java:1287) *can somebody help with it??? *

Read the article
Glassfish V3 won't start

- by Zakaria

Hi everybody, I installed NetBeans 6.8 and tried to run the GlasshFish V3 server. I'm working under Windows Vista 32 Bits. First, it won't run. Then I modified the c:\Windows\System32\drivers\etc\hosts file and put the following line into it: 127.0.0.1 localhost And when I run the GlasshFish V3 Server, no error is showing but only "INFOs" are displayed: 3 avr. 2010 19:23:19 com.sun.enterprise.glassfish.bootstrap.ASMain main INFO: Launching GlassFish on Felix platform Welcome to Felix ================ INFO: Perform lazy SSL initialization for the listener 'http-listener-2' INFO: Starting Grizzly Framework 1.9.18-k - Sat Apr 03 19:23:24 CEST 2010 INFO: Starting Grizzly Framework 1.9.18-k - Sat Apr 03 19:23:25 CEST 2010 INFO: Grizzly Framework 1.9.18-k started in: 423ms listening on port 35127 INFO: GlassFish v3 (74.2) startup time : Felix(4456ms) startup services(1709ms) total(6165ms) INFO: Grizzly Framework 1.9.18-k started in: 459ms listening on port 35116 INFO: Grizzly Framework 1.9.18-k started in: 428ms listening on port 35155 INFO: Grizzly Framework 1.9.18-k started in: 470ms listening on port 35160 INFO: Grizzly Framework 1.9.18-k started in: 513ms listening on port 35159 INFO: javassist.util.proxy.ProxyFactory.classLoaderProvider = org.glassfish.weld.WeldActivator$GlassFishClassLoaderProvider@5be8f4 INFO: Hibernate Validator bean-validator-3.0-JBoss-4.0.2 INFO: Binding RMI port to *:35165 INFO: Instantiated an instance of org.hibernate.validator.engine.resolver.JPATraversableResolver. INFO: JMXStartupService: Started JMXConnector, JMXService URL = service:jmx:rmi://PC-de-Charlotte:35165/jndi/rmi://PC-de-Charlotte:35165/jmxrmi INFO: Using com.sun.enterprise.transaction.jts.JavaEETransactionManagerJTSDelegate as the delegate INFO: [Thread[GlassFish Kernel Main Thread,5,main]] started INFO: Grizzly Framework 1.9.18-k started in: 150ms listening on port 35159 INFO: Perform lazy SSL initialization for the listener 'http-listener-2' INFO: {felix.fileinstall.poll (ms) = 5000, felix.fileinstall.dir = C:\Program Files\sges-v3\glassfish\modules\autostart, felix.fileinstall.debug = 1, felix.fileinstall.bundles.new.start = true, felix.fileinstall.tmpdir = C:\Users\CHARLO~1\AppData\Local\Temp\fileinstall-330907148519261411, felix.fileinstall.filter = null} INFO: {felix.fileinstall.poll (ms) = 5000, felix.fileinstall.dir = C:\Users\Charlotte\.netbeans\6.8\GlassFish_v3\autodeploy\bundles, felix.fileinstall.debug = 1, felix.fileinstall.bundles.new.start = true, felix.fileinstall.tmpdir = C:\Users\CHARLO~1\AppData\Local\Temp\fileinstall-2938963288421854459, felix.fileinstall.filter = null} INFO: Grizzly Framework 1.9.18-k started in: 95ms listening on port 35160 INFO: Updating configuration from org.apache.felix.fileinstall-autodeploy-bundles.cfg INFO: Installed C:\Program Files\sges-v3\glassfish\modules\autostart\org.apache.felix.fileinstall-autodeploy-bundles.cfg INFO: {felix.fileinstall.poll (ms) = 5000, felix.fileinstall.dir = C:\Users\Charlotte\.netbeans\6.8\GlassFish_v3\autodeploy\bundles, felix.fileinstall.debug = 1, felix.fileinstall.bundles.new.start = true, felix.fileinstall.tmpdir = C:\Users\CHARLO~1\AppData\Local\Temp\fileinstall-6474085409014899009, felix.fileinstall.filter = null} And there is no message such as "Glassfish started"! So, when I try to access to the admin web interface: localhost:4848 or localhost:8080 or localhost:8181 , It doesn't work. What should I do? Thank you very much, Regards.

Read the article
Running same powershell script multiple asynchronous times with separate runspace

- by teqnomad

Hi, I have a powershell script which is called by a batch script which is called by Trap Receiver (which also passes environment variables) (running on windows 2008). The traps are flushed out at times in sets of 2-4 trap events, and the batch script will echo the trap details for each message to a logfile, but the powershell script on the next line of the batch script will only appear to process the first trap message (the powershell script writes to the same logfile). My interpetation is that the defaultrunspace is common to all iterations of the script running and this is why the others appear to be ignored. I've tried adding "-sta" when I invoke the powershell script using "powershell.exe -command", but this didn't help. I've researched and found a method using C# but I don't know this language, and busy enough learning powershell, so hoping to find a more direct solution especially as interleaving a "wrapper" between batch and powershell will involve passing the environment variables. http://www.codeproject.com/KB/threads/AsyncPowerShell.aspx I've hunted through stackoverflow, and again the only question of similar vein was using C#. Any suggestions welcome. Some script background: The powershell script is actually a modification of a great script found at gregorystrike website - cant post the link as I'm limited to one link but its the one for Lefthand arrays. Lots of mods so it can do multiple targets from one .ini file, taking in the environment variables, and options to run portions of the script interactively with winform. But you can see the gist of the original script. The batch script is pretty basic. The keys things are I'm trying to filter out trap noise using the :~ operator, and I tried -sta option to see if this would compartmentalise the powershell script. set debug=off set CMD_LINE_ARGS="%*" set LHIPAddress="%2" set VARBIND8="%8" shift shift shift shift shift shift shift set CHASSIS="%9" echo %DATE% %TIME% "Trap Received: %LHIPAddress% %CHASSIS% %VARBIND8%" >> C:\Logs\trap_out.txt set ACTION="%VARBIND8:~39,18%" echo %DATE% %TIME% "Action substring is %ACTION%" 2>&1 >> C:\Logs\trap_out.txt if %ACTION%=="Remote Copy Volume" ( echo Prepostlefthand_env_v2.9 >> C:\Logs\trap_out.txt c:\Windows\System32\WindowsPowerShell\v1.0\PowerShell.exe -sta -executionpolicy unrestricted -command " & 'C:\Scripts\prepostlefthand_env_v2.9.ps1' Backupsettings.ini ALL" 2>&1 >> C:\Logs\trap_out.txt ) ELSE ( echo %DATE% %TIME% Action substring is %ACTION% so exiting" 2>&1 >> C:\Logs\trap.out.txt ) exit

Read the article
C# Windows Service Multiple Config Files

- by Goober

Quick Question Is it possible to have more than 1 config file in a windows service? Or is there some way I can merge them at run time? Scenario Currently I have two config files containing the below contents. After I build and install my Windows Service, I can't get my custom XML Parser class to read the content because it keeps pointing to the wrong config file, even though I am using a few lines of code to ensure it gets the right name of the config file I need to access. ALSO When I navigate to the folder in which the service is installed, there is only sign of the normal APP.Config file, and no sign of the custom config file. (I have even set the normal ones properties to "Do Not Copy" and the custom ones properties to "Copy Always"). Config File Determination Code string settingsFile = String.Format("{0}.exe.config", System.AppDomain.CurrentDomain.BaseDirectory + Assembly.GetExecutingAssembly().GetName().Name); CUSTOM CONFIG File <?xml version="1.0" encoding="utf-8" ?> <configuration> <servers> <SV066930> <add name="Name" value = "SV066930" /> <processes> <SimonTest1> <add name="ProcessName" value="notepad.exe" /> <add name="CommandLine" value="C:\\WINDOWS\\system32\\notepad.exe C:\\WINDOWS\\Profiles\\TA2TOF1\\Desktop\\SimonTest1.txt" /> </SimonTest1> </processes> </SV066930> </servers> </configuration> NORMAL APP.CONFIG File <?xml version="1.0" encoding="utf-8" ?> <configuration> <configSections> <section name="dataConfiguration" type="Microsoft.Practices.EnterpriseLibrary.Data.Configuration.DatabaseSettings, Microsoft.Practices.EnterpriseLibrary.Data, Version=4.0.0.0, Culture=neutral, PublicKeyToken=xxxxxxxxxxx" /> </configSections> <connectionStrings> <add name="DB" connectionString="Data Source=etc......" /> </connectionStrings> </configuration>

Read the article
IIS logs show sc-win32-status=64 but only through some networks

- by wweicker

I have an ASP.NET application running on a client server (W2k3, IIS6, .NET 2.0). FWIW, this is a Test instance, it hasn't been moved into Production yet. So it is not running under SSL, load balancing, etc. When I access one of the pages on their server from our office, the page gets hit once. Inspecting the IIS logs (c:WINDOWS\system32\LogFiles\W3SVC1) show a GET for that page, then I push a button on the page and the log file shows a POST. This seems to be working fine so far. Now when I remote into the client's network and access the page from one of their local machines, the log file shows a GET, then I push the button on the page and the log shows two POSTs at the same second. The first one shows status (sc-status, sc-substatus, sc-win32-status) 200 0 64, the second shows 200 0 0. In the log file, both POSTs are identical. Basically the log looks like this (except I masked some of the data): #Fields: date time s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-Agent) sc-status sc-substatus sc-win32-status 2009-08-11 20:19:32 x.x.x.x GET /File.aspx - 80 - y.y.y.y Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.0;+WOW64;+Trident/4.0;+SLCC1;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.21022;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30618;+MDDR;+OfficeLiveConnector.1.4;+OfficeLivePatch.0.0) 200 0 0 2009-08-11 20:19:45 x.x.x.x POST /File.aspx - 80 - y.y.y.y Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.0;+WOW64;+Trident/4.0;+SLCC1;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.21022;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30618;+MDDR;+OfficeLiveConnector.1.4;+OfficeLivePatch.0.0) 200 0 64 2009-08-11 20:19:45 x.x.x.x POST /File.aspx - 80 - y.y.y.y Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.0;+WOW64;+Trident/4.0;+SLCC1;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.21022;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30618;+MDDR;+OfficeLiveConnector.1.4;+OfficeLivePatch.0.0) 200 0 0 The problem is, the page is getting hit twice. The database performs an operation for the first request, then the second request detects that a duplicate operation is being performed and throws an error message. The users think their operation failed, but it actually succeeded. The error description of sc-win32-status 64 is: "The specified network name is no longer available." This leads me to believe, given that both POST requests show an HTTP status of 200, that the server is successful in serving the request, but the client is never notified and resubmits the request. How can I troubleshoot this? Any ideas what could be causing this behavior on their internal network only? I should mention, this is happening at two separate client sites, but does not happen at six of our other client sites, or in our office, or connecting to any of our eight clients over the web. What could be making this reproducible 100% of the time on their local network but 0% of the time anywhere else? Update: I found a very small number of the duplicated POST requests had sc-win32-status of 995 instead of 64 as originally reported. The error description of sc-win32-status=995 is: "The I/O operation has been aborted because of either a thread exit or an application request." This doesn't make any sense (considering I have full access to the code). I still don't understand how or why this issue is occurring, but the new error code leads me to believe it may not be a network issue after all and I am now investigating the possibility of a random code bug.

Read the article
Customize your icons in Windows 7 and Vista

- by Matthew Guay

Want to change out the icons on your desktop and more? Personalizing your icons is a great way to make your PC uniquely yours,, and today we show you how to grab unique icons, and default Winnows. to be your own. Change the icon for Computer, Recycle Bin, Network, and your User folder Right-click on the desktop, and select Personalize. Now, click the “Change desktop icons” link on the left sidebar in the Personalization window. The window looks slightly different in Windows Vista, but the link is the same. Select the icon you wish to change, and click the Change Icon button. In Windows 7, you will also notice a box to choose whether or not to allow themes to change icons, and you can uncheck it if you don’t want themes to change your icon settings. You can select one of the other included icons, or click browse to find the icon you want. Click Ok when you are finished. Change Folder icons You can easily change the icon on most folders in Windows Vista and 7. Simply right-click on the folder and select properties. Click the Customize tab, and then click the Change Icon button. This will open the standard dialog to change your icon, so proceed as normal. This basically just creates a hidden desktop.ini file in the folder containing the following or similar data: [.ShellClassInfo]IconFile=%SystemRoot%\system32\SHELL32.dllIconIndex=20 You could manually create or edit the file if you choose, instead of using the dialogs. Simply create a new text file named desktop.ini with this same information, or edit the existing one. Change the IconFile line to the location of your icon. If you are pointing to a .ico file you should change the IconIndex line to 0 instead. Note that this isn’t available for all folders, for instance you can’t use this to change the icon for the Windows folder. In Windows 7, please note that you cannot change the icon of folder inside a library. So if you are browsing your Documents library and would like to change an icon in that folder, right-click on it and select Open folder location. Now you can change the icon as above. And if you would like to change a Library’s icon itself, then check out this tutorial: Change Your Windows 7 Library Icons the Easy Way Change the icon of any file type Want to make you files easier to tell apart? Check out our tutorial on how to simply do this: Change a File Type’s Icon in Windows 7 Change the icon of any Application Shortcut To change the icon of a shortcut on your desktop, start menu, or in Explorer, simply right-click on the icon and select Properties. In the Shortcut tab, click the Change Icon button. Now choose one of the other available icons or click browse to find the icon you want. Change Icons of Running Programs in the Windows 7 taskbar If your computer is running Windows 7, you can customize the icon of any program running in the taskbar! This only works on applications that are running but not pinned to the taskbar, so if you want to customize a pinned icon you may want to unpin it before customizing it. But the interesting thing about this trick is that it can customize any icon anything running in the taskbar, including things like Control Panel! Right-click or click and push up to open the jumplist on the icon, and then right-click on the program’s name and select Properties. Here we are customizing Control Panel, but you can do this on any application icon. Now, click Change Icon as usual. Select an icon you want (We switched the Control Panel icon to the Security Shield), or click Browse to find another icon. Click Ok when finished, and then close the application window. The next time you open the program (or Control Panel in our example), you will notice your new icon on its taskbar icon. Please note that this only works on applications that are currently running and are not pinned to the taskbar. Strangely, if the application is pinned to the taskbar, you can still click Properties and change the icon, but the change will not show up. Change the icon on any Drive on your Computer You can easily change the icon on your internal hard drives and portable drives with the free Drive Icon Changer application. Simply download and unzip the file (link below), and then run the application as administrator by right-clicking on the icon and selecting “Run as administrator”. Now, select the drive that you want to change the icon of, and select your desired icon file. Click Save, and Drive Icon Changer will let you know that the icon has been changed successfully. You will then need to reboot your computer to complete the changes. Simply click Yes to reboot. Now, our Drive icon is changed from this default image: to a Laptop icon we chose! You can do this to any drive in your computer, or to removable drives such as USB flash drives. When you change these drives icons, the new icon will appear on any computer you insert the drive into. Also, if you wish to remove the icon change, simply run the Drive Icon Changer again and remove the icon path. Download Drive Icon Changer This application actually simply creates or edits a hidden Autorun.inf file on the top of your drive. You can edit or create the file yourself by hand if you’d like; simply include the following information in the file, and save it in the top directory of your drive: [autorun]ICON=[path of your icon] Remove Arrow from shortcut icons Many people don’t like the arrow on the shortcut icon, and there are two easy ways to do this. If you’re running the 32 bit version of Windows Vista or 7, simply use the Vista Shortcut Overlay Remover. If your computer is running the 64 bit version of Windows Vista or 7, use the Ultimate Windows Tweaker instead. Simply select the Additional Tweaks section, and check the “Remove arrows from Shortcut Icons.” For more info and download links check out this article: Disable Shortcut Icon Arrow Overlay in Windows 7 or Vista Closing: This gives you a lot of ways to customize almost any icon on your computer, so you can make it look just like you want it to. Stay tuned for more great desktop customization articles from How-to Geek! Similar Articles Productive Geek Tips Change Start Menu to Use Small Icons in Windows 7 or VistaResize Icons Quickly in Windows 7 or Vista ExplorerRoundup: 16 Tweaks to Windows Vista Look & FeelRestore Missing Desktop Icons in Windows 7 or VistaClean Up Past Notification Icons in Windows Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Change DNS servers on the fly with DNS Jumper Live PDF Searches PDF Files and Ebooks Converting Mp4 to Mp3 Easily Use Quick Translator to Translate Text in 50 Languages (Firefox) Get Better Windows Search With UltraSearch Scan News With NY Times Article Skimmer

Read the article
Change or Reset Windows Password from a Ubuntu Live CD

- by Trevor Bekolay

If you can’t log in even after trying your twelve passwords, or you’ve inherited a computer complete with password-protected profiles, worry not – you don’t have to do a fresh install of Windows. We’ll show you how to change or reset your Windows password from a Ubuntu Live CD. This method works for all of the NT-based version of Windows – anything from Windows 2000 and later, basically. And yes, that includes Windows 7. You’ll need a Ubuntu 9.10 Live CD, or a bootable Ubuntu 9.10 Flash Drive. If you don’t have one, or have forgotten how to boot from the flash drive, check out our article on creating a bootable Ubuntu 9.10 flash drive. The program that lets us manipulate Windows passwords is called chntpw. The steps to install it are different in 32-bit and 64-bit versions of Ubuntu. Installation: 32-bit Open up Synaptic Package Manager by clicking on System at the top of the screen, expanding the Administration section, and clicking on Synaptic Package Manager. chntpw is found in the universe repository. Repositories are a way for Ubuntu to group software together so that users are able to choose if they want to use only completely open source software maintained by Ubuntu developers, or branch out and use software with different licenses and maintainers. To enable software from the universe repository, click on Settings > Repositories in the Synaptic window. Add a checkmark beside the box labeled “Community-maintained Open Source software (universe)” and then click close. When you change the repositories you are selecting software from, you have to reload the list of available software. In the main Synaptic window, click on the Reload button. The software lists will be downloaded. Once downloaded, Synaptic must rebuild its search index. The label over the text field by the Search button will read “Rebuilding search index.” When it reads “Quick search,” type chntpw in the text field. The package will show up in the list. Click on the checkbox near the chntpw name. Click on Mark for Installation. chntpw won’t actually be installed until you apply the changes you’ve made, so click on the Apply button in the Synaptic window now. You will be prompted to accept the changes. Click Apply. The changes should be applied quickly. When they’re done, click Close. chntpw is now installed! You can close Synaptic Package Manager. Skip to the section titled Using chntpw to reset your password. Installation: 64-bit The version of chntpw available in Ubuntu’s universe repository will not work properly on a 64-bit machine. Fortunately, a patched version exists in Debian’s Unstable branch, so let’s download it from there and install it manually. Open Firefox. Whether it’s your preferred browser or not, it’s very readily accessible in the Ubuntu Live CD environment, so it will be the easiest to use. There’s a shortcut to Firefox in the top panel. Navigate to http://packages.debian.org/sid/amd64/chntpw/download and download the latest version of chntpw for 64-bit machines. Note: In most cases it would be best to add the Debian Unstable branch to a package manager, but since the Live CD environment will revert to its original state once you reboot, it’ll be faster to just download the .deb file. Save the .deb file to the default location. You can close Firefox if desired. Open a terminal window by clicking on Applications at the top-left of the screen, expanding the Accessories folder, and clicking on Terminal. In the terminal window, enter the following text, hitting enter after each line: cd Downloadssudo dpkg –i chntpw* chntpw will now be installed. Using chntpw to reset your password Before running chntpw, you will have to mount the hard drive that contains your Windows installation. In most cases, Ubuntu 9.10 makes this simple. Click on Places at the top-left of the screen. If your Windows drive is easily identifiable – usually by its size – then left click on it. If it is not obvious, then click on Computer and check out each hard drive until you find the correct one. The correct hard drive will have the WINDOWS folder in it. When you find it, make a note of the drive’s label that appears in the menu bar of the file browser. If you don’t already have one open, start a terminal window by going to Applications > Accessories > Terminal. In the terminal window, enter the commands cd /medials pressing enter after each line. You should see one or more strings of text appear; one of those strings should correspond with the string that appeared in the title bar of the file browser earlier. Change to that directory by entering the command cd <hard drive label> Since the hard drive label will be very annoying to type in, you can use a shortcut by typing in the first few letters or numbers of the drive label (capitalization matters) and pressing the Tab key. It will automatically complete the rest of the string (if those first few letters or numbers are unique). We want to switch to a certain Windows directory. Enter the command: cd WINDOWS/system32/config/ Again, you can use tab-completion to speed up entering this command. To change or reset the administrator password, enter: sudo chntpw SAM SAM is the file that contains your Windows registry. You will see some text appear, including a list of all of the users on your system. At the bottom of the terminal window, you should see a prompt that begins with “User Edit Menu:” and offers four choices. We recommend that you clear the password to blank (you can always set a new password in Windows once you log in). To do this, enter “1” and then “y” to confirm. If you would like to change the password instead, enter “2”, then your desired password, and finally “y” to confirm. If you would like to reset or change the password of a user other than the administrator, enter: sudo chntpw –u <username> SAM From here, you can follow the same steps as before: enter “1” to reset the password to blank, or “2” to change it to a value you provide. And that’s it! Conclusion chntpw is a very useful utility provided for free by the open source community. It may make you think twice about how secure the Windows login system is, but knowing how to use chntpw can save your tail if your memory fails you two or eight times! Similar Articles Productive Geek Tips Reset Your Ubuntu Password Easily from the Live CDChange Your Forgotten Windows Password with the Linux System Rescue CDHow to Create and Use a Password Reset Disk in Windows Vista & Windows 7Reset Your Forgotten Password the Easy Way Using the Ultimate Boot CD for WindowsHow to install Spotify in Ubuntu 9.10 using Wine TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Add a Custom Title in IE using Spybot or Spyware Blaster When You Need to Hail a Taxi in NYC Live Map of Marine Traffic NoSquint Remembers Site Specific Zoom Levels (Firefox) New Firefox release 3.6.3 fixes 1 Critical bug Dark Side of the Moon (8-bit)

Read the article
How can I automatically update Flash Player whenever a new version is released? [closed]

- by user219950

Summary: Flash Player Update Service doesn't run on a reliable schedule, and doesn't automatically download and apply updates when it does run. Given the importance of having an up-to-date version of Flash Player installed (for those of us who don't use Chrome with its built-in player), I would like to find a way to ensure that new updates are promptly detected and installed. What follows are the details of my efforts to solve this problem on my own... Appendix A: Flash Player Update Service OK, way back in Flash Player 11.2 (or so?) Adobe added the Flash Player Update Service (FlashPlayerUpdateService.exe), it was supposed to keep the Flash Player updated... Upon installation, FPUS is configured to run as a Windows Service, with Start Type set to Manual. A Scheduled Task (Adobe Flash Player Updater.job) is added to start this service every hour. So far, so good - this set-up avoids having a constantly-running service, but makes sure that the checks are run often enough to catch any updates quickly. Google's software updater is configured in a similar fashion, and that works just fine... ...And yet, when I checked the version of my installed Flash Player, I found it was 11.6.602.180, which, based on looking at the timestamps of the files in C:\Windows\System32\Macromed\Flash was last updated (or installed) on Tue, Mar 12, 2013 --- 3/12/13, 5:00:08pm. I made this observation on Thu, Apr 25, 2013 --- 4/25/13, 7:00:00pm, and upon checking Adobe's website found that the current version of Flash Player was 11.7.700.169. That's over a month since the last update, with a new one clearly available on the website but with no indication that the hourly check running on my machine has noticed it or has any intention of downloading it. Appendix B: running the Flash Player updater manually Once upon a time, running FlashUtil32_<version_Plugin.exe -update plugin would give you a window with an Install button; pressing it would download the installer for the current version (automatically, without opening a browser) and run it, then you'd click thru that installer & be done. It was manual, but it worked! Finding my current installation out of date (see Appendix A), I first tried this manual update process. However... Running FlashUtil32_<version_ActiveX.exe -update activex (in my case, that's FlashUtil32_11_6_602_180_ActiveX.exe -update activex) ...only presents a window with a Download button, clicking that Download button opens my browser to the URL https://get3.adobe.com/flashplayer/update/activex. Running FlashUtil32_<version_Plugin.exe -update plugin (in my case, that's FlashUtil32_11_6_602_180_Plugin.exe -update plugin) ...only presents a window with a Download button, clicking that Download button opens my browser to the URL https://get3.adobe.com/flashplayer/update/plugin. I could continue with the Download page it sent me to, uncheck the foistware box ("Free! McAfee Security Scan Plus"), download that installer (ActiveX, no foistware: install_flashplayer11x32axau_mssd_aih.exe, Plugin, no foistware: install_flashplayer11x32au_mssd_aih.exe) & probably have an updated Flash...but then, what is the point of the Flash Player Update Service if I have to manually download & run another exe? Epilogue I've since come to suspect that the update service is intentionally hobbled to drive early adopters to the manual download page. If this is true, there's probably no solution to this short of writing my own updater; hopefully I am wrong.

Read the article
Useful Command-line Commands on Windows

- by Sung Meister

The aim for this Wiki is to promote using a command to open up commonly used applications without having to go through many mouse clicks - thus saving time on monitoring and troubleshooting Windows machines. Answer entries need to specify Application name Commands Screenshot (Optional) Shortcut to commands && - Command Chaining %SYSTEMROOT%\System32\rcimlby.exe -LaunchRA - Remote Assistance (Windows XP) appwiz.cpl - Programs and Features (Formerly Known as "Add or Remove Programs") appwiz.cpl @,2 - Turn Windows Features On and Off (Add/Remove Windows Components pane) arp - Displays and modifies the IP-to-Physical address translation tables used by address resolution protocol (ARP) at - Schedule tasks either locally or remotely without using Scheduled Tasks bootsect.exe - Updates the master boot code for hard disk partitions to switch between BOOTMGR and NTLDR cacls - Change Access Control List (ACL) permissions on a directory, its subcontents, or files calc - Calculator chkdsk - Check/Fix the disk surface for physical errors or bad sectors cipher - Displays or alters the encryption of directories [files] on NTFS partitions cleanmgr.exe - Disk Cleanup clip - Redirects output of command line tools to the Windows clipboard cls - clear the command line screen cmd /k - Run command with command extensions enabled color - Sets the default console foreground and background colors in console command.com - Default Operating System Shell compmgmt.msc - Computer Management control.exe /name Microsoft.NetworkAndSharingCenter - Network and Sharing Center control keyboard - Keyboard Properties control mouse(or main.cpl) - Mouse Properties control sysdm.cpl,@0,3 - Advanced Tab of the System Properties dialog control userpasswords2 - Opens the classic User Accounts dialog desk.cpl - opens the display properties devmgmt.msc - Device Manager diskmgmt.msc - Disk Management diskpart - Disk management from the command line dsa.msc - Opens active directory users and computers dsquery - Finds any objects in the directory according to criteria dxdiag - DirectX Diagnostic Tool eventvwr - Windows Event Log (Event Viewer) explorer . - Open explorer with the current folder selected. explorer /e, . - Open explorer, with folder tree, with current folder selected. F7 - View command history find - Searches for a text string in a file or files findstr - Find a string in a file firewall.cpl - Opens the Windows Firewall settings fsmgmt.msc - Shared Folders fsutil - Perform tasks related to FAT and NTFS file systems ftp - Transfers files to and from a computer running an FTP server service getmac - Shows the mac address(es) of your network adapter(s) gpedit.msc - Group Policy Editor gpresult - Displays the Resultant Set of Policy (RSoP) information for a target user and computer httpcfg.exe - HTTP Configuration Utility iisreset - To restart IIS InetMgr.exe - Internet Information Services (IIS) Manager 7 InetMgr6.exe - Internet Information Services (IIS) Manager 6 intl.cpl - Regional and Language Options ipconfig - Internet protocol configuration lusrmgr.msc - Local Users and Groups Administrator msconfig - System Configuration notepad - Notepad? ;) mmsys.cpl - Sound/Recording/Playback properties mode - Configure system devices more - Displays one screen of output at a time mrt - Microsoft Windows Malicious Software Removal Tool mstsc.exe - Remote Desktop Connection nbstat - displays protocol statistics and current TCP/IP connections using NBT ncpa.cpl - Network Connections netsh - Display or modify the network configuration of a computer that is currently running netstat - Network Statistics net statistics - Check computer up time net stop - Stops a running service. net use - Connects a computer to or disconnects a computer from a shared resource, or displays information about computer connections odbcad32.exe - ODBC Data Source Administrator pathping - A traceroute that collects detailed packet loss stats perfmon - Opens Reliability and Performance Monitor ping - Determine whether a remote computer is accessible over the network powercfg.cpl - Power management control panel applet quser - Display information about user sessions on a terminal server qwinsta - See disconnected remote desktop sessions reg.exe - Console Registry Tool for Windows regedit - Registry Editor rasdial - Connects to a VPN or a dialup network robocopy - Backup/Restore/Copy large amounts of files reliably rsop.msc - Resultant Set of Policy (shows the combined effect of all group policies active on the current system/login) runas - Run specific tools and programs with different permissions than the user's current logon provides sc - Manage anything you want to do with services. schtasks - Enables an administrator to create, delete, query, change, run and end scheduled tasks on a local or remote system. secpol.msc - Local Security Settings services.msc - Services control panel set - Displays, sets, or removes cmd.exe environment variables. set DIRCMD - Preset dir parameter in cmd.exe start - Starts a separate window to run a specified program or command start. - opens the current directory in the Windows Explorer. shutdown.exe - Shutdown or Reboot a local/remote machine subst.exe - Associates a path with a drive letter, including local drives systeminfo -Displays a comprehensive information about the system taskkill - terminate tasks by process id (PID) or image name tasklist.exe - List Processes on local or a remote machine taskmgr.exe - Task Manager telephon.cpl - Telephone and Modem properties timedate.cpl - Date and Time title - Change the title of the CMD window you have open tracert - Trace route wmic - Windows Management Instrumentation Command-line winver.exe - Find Windows Version wscui.cpl - Windows Security Center wuauclt.exe - Windows Update AutoUpdate Client

Read the article
Unmountable boot volume blue screen, what should I do?

- by Josh

I was trying to install an update from NVIDIA for my GTX 560, but while it was installing, my computer shut off. After a few minutes, I turned it back on. It got to the Windows boot screen and then had a blue screen error and if left on it would just keep doing that. A few details about my PC: I haven't added any new hardware or software, I'm running Windows XP Professional 32 bit and Windows XP Professional 64 bit on the same hard drive for about 2 years now. I have 2 other hard drives also, but I don't have one large enough to hold everything from my main hard drive, so formatting isn't an option. Now, as for what I've done so far: I've scanned the RAM with "memtest - 86 v3.4" and it said that it was good. I scanned the hard drive in question with chkdsk /r and it gets to 50% and tells me something along the lines of "the drive has one or more unrepairable problems". I also tried to use chkdsk on the drive I installed the new copy of Windows XP on and it got to 75% then jumped back down to 50% and stayed there (I had to reboot the pc). So, after that, I turned off auto reboot and got to read the blue screen error code and I looked it up only to find that nobody seems to have this problem, just problems close to it. The error code is 0x000000ed and I've seen a lot of these online but none that matched the detailed part of the code UNMOUNTABLE_BOOT_VOLUME 0x000000ed (0xfffffadf513c19a0, 0xffffffffc0000006, 0, 0) So, I have installed another copy of Windows XP Professional 32 bit on one of my other hard drives in hopes of accessing the data on the drive in question and when it booted it asked if I wanted chkdsk to scan the drive in question and this is what it found: file record segments 12740, 12741, 12742 and 12743 were reported unreadable. Then it says "recovering lost files" but it sits there for a few seconds and then just boots to Windows. I can't access the drive in question from Windows as far as I can tell, it just says "drive not accessible" and when I go to properties it says that the drive has 100% free space. So, after that failed I didn't give up, I looked for another way to access the drive in question. I used a Ubuntu bootable disk and was able to access the drive in question without any problems. However, I can't access the registry editor because it's a .exe file and that won't load from Ubuntu. I made a copy of the "Windows" folder and put it on one of my other drives and that's where I'm stuck at now. I'm sure my drive works fine, I know chkdsk can't fix the problem with it and I know what caused the problem in the first place for the most part, but I don't know what to do about it. I have a laptop that I can use to download and burn disks if needed and I also have the other copy of Windows XP Professional 32 bit that I can use that's installed on the computer in question (so I know it's not a hardware issue). I'm pretty sure it's a driver issue or the update was editing the registry when it shut off and left me when a broken registry. I've tried accessing C:\Windows\System32\CONFIG only to find that the Windows XP disk repair option can't even access the files on the drive in question. It seems I'll need to be able to do everything from Ubuntu unless there is something I haven't tried with the Windows XP disk. I didn't install the update on Windows XP 64 bit but yet it also has the same blue screen error (that's where the error code above came from but I haven't checked to see if they are the same). They both stopped working at the same time, so I assume it's one problem causing both to not work.

Read the article
BSOD & System Failure after trying to install a new RAM

- by Praveen Kumar

I have updated the question with sections, so that people won't find it difficult to read. Basic System Information Let me give a basic introduction on my system. I have a system of following configuration: Processor: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz 3.40GHz RAM: Corsair Vengeance - 4GB Single Module DDR3 Memory Kit (CMZ4GX3M1A1600C9) x 2 OS: Windows 7 Ultimate, SP1 Build 7601 HDD: 1 TB Seagate 7200 RPM The Problem It was working fine for about an year. Yesterday I planned to increase my RAM to 16 GB by putting another set of two Corsair Vengeance - 4GB Single Module DDR3 Memory Kit (CMZ4GX3M1A1600C9). I got it from an authorized reseller and also, the RAM was fitted by a service engineer only. After the RAM was fit (all the four), the system failed to start, with an error code of 0x000000f4. The complete information of it is: Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.256.1 Locale ID: 16393 Additional information about the problem: BCCode: f4 BCP1: 0000000000000003 BCP2: FFFFFA8008A39060 BCP3: FFFFFA8008A39340 BCP4: FFFFF800037C8510 OS Version: 6_1_7601 Service Pack: 1_0 Product: 256_1 Files that help describe the problem: C:\Windows\Minidump\093012-13041-01.dmp C:\Users\Praveen Kumar\AppData\Local\Temp\WER-30716-0.sysdata.xml Read our privacy statement online: http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409 If the online privacy statement is not available, please read our privacy statement offline: C:\Windows\system32\en-US\erofflps.txt Another Problem We first thought that it was the RAM, which caused the issue. So I returned the RAMs and now my computer configuration is exactly how it was the previous day. But, following the removal of the RAM, I also had several crashes after that. One suspicious thing was with an error code c0000134: STOP: c0000135 The program can’t start because %hs is missing from your computer . Try resintalling the program to fix this problem. After reading contents from this, this and this, which were never my case, they didn't help me. But I didn't receive any more STOP c0000134 messages. But this 0x000000f4 keeps on coming. I am writing from the same system and it allows me to work for say, half an hour max. Then I hear a device disconnect sound, the one you hear in Windows 7, when a USB Mass Storage Device is plugged out. Immediately following that, my screen goes blank and I get 0x000000f4 blue screen. Okay, now I am really concerned about my Hard Disk data, but I have no clue if there is a problem with the HDD. My Question What all files do I need to submit for your reference? Can this issue be fixed? I am getting more time if I remove my RAM, clean it and then put it back. Weird! Hope I have given the necessary information to help you guys. Thanks in advance. Minidumps I have uploaded all the Minidump DMP files from C:\Windows\Minidump folder here: http://www.praveen-kumar.com/Minidumps.zip Let me know if you face any issues in accessing it. Will be able to share elsewhere. Updates 30-Sep-2012 10:15 AM IST: When I keep the system cover opened, pressed the HDD Cable well, it is allowing me to be on for about half an hour, I guess? Also, I feel that the CPU fan speed is kind of slow. It rotates at around 900 RPM, but the CPU Temperature is not more than 70° C. 30-Sep-2012 10:30 AM IST: My Modem (Beetel 220BX ADSL2+ Router) failed. I have no idea how it is related to this issue, but I thought that I need to document this too. I really have a bad day here. 30-Sep-2012 11:00 AM IST: System still running fine, with the cabinet cover open, now for about an hour. 30-Sep-2012 12:00 PM IST: I shut down the system and closed the cabinet. Started the system, and it hung after giving the password. After a few minutes, got the same 0x000000f4 error. So, while it is in the upright position, fixed the Hard Disk cable and now it is booting fine. Waiting for more observations and answers.

Read the article
How to prevent delays associated with IPv6 AAAA records?

- by Nic

Our Windows servers are registering IPv6 AAAA records with our Windows DNS servers. However, we don't have IPv6 routing enabled on our network, so this frequently causes stall behaviours. Microsoft RDP is the worst offender. When connecting to a server that has a AAAA record in DNS, the remote desktop client will try IPv6 first, and won't fall back to IPv4 until the connection times out. Power users can work around this by connecting to the IP address directly. Resolving the IPv4 address with ping -4 hostname.foo always works instantly. What can I do to avoid this delay? Disable IPv6 on client? Nope, Microsoft says IPv6 is a mandatory part of the Windows operating system. Too many clients to ensure this is set everywhere consistently. Will cause more problems later when we finally implement IPv6. Disable IPv6 on the server? Nope, Microsoft says IPv6 is a mandatory part of the Windows operating system. Requires an inconvenient registry hack to disable the entire IPv6 stack. Ensuring this is correctly set on all servers is inconvenient. Will cause more problems later when we finally implement IPv6. Mask IPv6 records on the user-facnig DNS recursor? Nope, we're using NLNet Unbound and it doesn't support that. Prevent registration of IPv6 AAAA records on the Microsoft DNS server? I don't think that's even possible. At this point, I'm considering writing a script that purges all AAAA records from our DNS zones. Please, help me find a better way. UPDATE: DNS resolution is not the problem. As @joeqwerty points out in his answer, the DNS records are returned instantly. Both A and AAAA records are immediately available. The problem is that some clients (mstsc.exe) will preferentially attempt a connection over IPv6, and take a while to fall back to IPv4. This seems like a routing problem. The ping command produces a "General failure" error message because the destination address is unroutable. C:\Windows\system32>ping myhost.mydomain Pinging myhost.mydomain [2002:1234:1234::1234:1234] with 32 bytes of data: General failure. General failure. General failure. General failure. Ping statistics for 2002:1234:1234::1234:1234: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), I can't get a packet capture of this behaviour. Running this (failing) ping command does not produce any packets in Microsoft Network Monitor. Similarly, attempting a connection with mstsc.exe to a host with an AAAA record produces no traffic until it does a fallback to IPv4. UPDATE: Our hosts are all using publicly-routable IPv4 addresses. I think this problem might come down to a broken 6to4 configuration. 6to4 behaves differently on hosts with public IP addresses vs RFC1918 addresses. UPDATE: There is definitely something fishy with 6to4 on my network. When I disable 6to4 on the Windows client, connections resolve instantly. netsh int ipv6 6to4 set state disabled But as @joeqwerty says, this only masks the problem. I'm still trying to find out why IPv6 communication on our network is completely non-working.

Read the article
No root file system is defined error after installation

- by LearnCode

I installed ubuntu through Wubi and once i rebooted I get no root file system defined error. here's the output of the boot_info_script.Could anyone point me out where the error is. Boot Info Script 0.60 from 17 May 2011 ============================= Boot Info Summary: =============================== => Windows is installed in the MBR of /dev/sda. => Windows is installed in the MBR of /dev/sdb. sda1: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe /ntldr /ntdetect.com /wubildr /ubuntu/winboot/wubildr /wubildr.mbr /ubuntu/winboot/wubildr.mbr /ubuntu/disks/root.disk /ubuntu/disks/swap.disk sda1/Wubi: _____________________________________________________________________ File system: Boot sector type: Unknown Boot sector info: Mounting failed: mount: unknown filesystem type '' sda2: __________________________________________________________________________ File system: vfat Boot sector type: Unknown Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: /boot.ini /ntldr /NTDETECT.COM sdb1: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: ============================ Drive/Partition Info: ============================= Drive: sda _____________________________________________________________________ Disk /dev/sda: 160.0 GB, 160041885696 bytes 240 heads, 63 sectors/track, 20673 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 * 63 301,250,879 301,250,817 7 NTFS / exFAT / HPFS /dev/sda2 301,250,943 312,575,759 11,324,817 c W95 FAT32 (LBA) GUID Partition Table detected, but does not seem to be used. Partition Start Sector End Sector # of Sectors System /dev/sda1 323,465,741,313,502,988275,962,973,585-323,465,465,350,529,402 - /dev/sda2 242,728,591,638,290,720578,721,383,108,845,578335,992,791,470,554,859 - /dev/sda3 1,827,498,311,425,204,2562,091,935,274,843,009,907264,436,963,417,805,652 - /dev/sda4 579,711,218,081,401,3572,006,665,459,744,645,1521,426,954,241,663,243,796 - /dev/sda11 270,286,346,402,038,1183,786,543,326,404,525,9543,516,256,980,002,487,837 - /dev/sda12 4,179,681,002,230,769,6684,179,389,374,010,033,387-291,628,220,736,280 - /dev/sda13 232,556,480,979,456,1311,160,152,593,793,119,235927,596,112,813,663,105 - /dev/sda14 98,342,784,050,266,9183,691,264,578,843,725,1953,592,921,794,793,458,278 - /dev/sda15 2,307,845,219,957,882,4961,850,841,032,955,276,350-457,004,187,002,606,145 - /dev/sda16 512,592,046,878,946,497368,458,231,024,779,444-144,133,815,854,167,052 - /dev/sda17 2,504,135,232,870,384,3923,665,087,872,719,320,8291,160,952,639,848,936,438 - /dev/sda18 3,783,181,605,270,691,304122,034,509,624,708,942-3,661,147,095,645,982,361 - /dev/sda19 3,519,661,520,275,829,5122,376,243,094,723,723,587-1,143,418,425,552,105,924 - /dev/sda20 3,867,920,076,859,0744,494,691,111,933,625,1044,490,823,191,856,766,031 - /dev/sda21 1,500,144,061,909,253,7612,511,182,033,846,676,3401,011,037,971,937,422,580 - /dev/sda22 13,035,625,499,900,0062,360,168,613,941,394,9472,347,132,988,441,494,942 - /dev/sda23 4,228,978,682,068,599,48813,159,423,631,648,263-4,215,819,258,436,951,224 - /dev/sda24 3,695,955,742,872,046,9084,561,928,726,501,845,776865,972,983,629,798,869 - /dev/sda25 1,297,460,286,683,948,0461,444,350,486,339,417,957146,890,199,655,469,912 - /dev/sda26 1,228,858,248,533,131,831 0-1,228,858,248,533,131,830 - /dev/sda121 3,189,184,846,146,487,1461,849,820,258,006,914,852-1,339,364,588,139,572,293 - /dev/sda122 1,226,215,547,991,800,578389,781,518,734,546,300-836,434,029,257,254,277 - /dev/sda123 3,851,660,168,574,583,4654,046,215,657,583,031,556194,555,489,008,448,092 - /dev/sda124 1,197,460,980,174,153,341699,103,965,005,093,246-498,357,015,169,060,094 - Drive: sdb _____________________________________________________________________ Disk /dev/sdb: 750.2 GB, 750153367552 bytes 255 heads, 63 sectors/track, 91200 cylinders, total 1465143296 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sdb1 2,048 1,465,143,295 1,465,141,248 7 NTFS / exFAT / HPFS "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/loop0 iso9660 Ubuntu 11.04 amd64 /dev/loop1 squashfs /dev/sda1 E814B55B14B52E06 ntfs /dev/sda2 01CD-023B vfat HP_RECOVERY /dev/sdb1 7836F22A36F1E8D0 ntfs Elements ================================ Mount points: ================================= Device Mount_Point Type Options /dev/loop0 /cdrom iso9660 (ro,noatime) /dev/loop1 /rofs squashfs (ro,noatime) /dev/sdb1 /mnt fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) ================================ sda2/boot.ini: ================================ -------------------------------------------------------------------------------- [boot loader] timeout=0 default=C:\CMDCONS\BOOTSECT.DAT [operating systems] multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /fastdetect C:\CMDCONS\BOOTSECT.DAT="Microsoft Windows Recovery Console" /cmdcons -------------------------------------------------------------------------------- ======================== Unknown MBRs/Boot Sectors/etc: ======================== Unknown GPT Partiton Type c104043000e9b9040dff24b580010100 Unknown GPT Partiton Type 46313020746f20737461727420746865 Unknown GPT Partiton Type 65727920706172746974696f6e207761 Unknown GPT Partiton Type 727920706172746974696f6e0d0a0000 Unknown GPT Partiton Type 000f84e5f7668b162404e82804744066 Unknown GPT Partiton Type ce01e8dc038bfe66391624047505e8d9 Unknown GPT Partiton Type 0345086603f0e881030bd2740333d240 Unknown GPT Partiton Type bece01e8db0287fec645041266895508 Unknown GPT Partiton Type 01f60634010175078b363b01e854f5e8 Unknown GPT Partiton Type 313825740ffec03865107408fec03824 Unknown GPT Partiton Type 02f60634014074088bfdbece01e85101 Unknown GPT Partiton Type 263401f9e894f30f858ef4e8e201e8ec Unknown GPT Partiton Type f7e960f35245434f5645525966606633 Unknown GPT Partiton Type 660faf1e00106603dac3668b0e001066 Unknown GPT Partiton Type 8bfd386d04740583c710e2f6c36660c6 Unknown GPT Partiton Type 04ebf132c0b91000f3aac3bf0c04ebf3 Unknown GPT Partiton Type 02662bc1660fb71e0e02662bc366031e Unknown GPT Partiton Type f4b40ebb0700b901003c08751381ff25 Unknown GPT Partiton Type 534f465448494e4b90653f62011b0100 Unknown GPT Partiton Type 0b050900027777772e68702e636f6d00 Unknown GPT Partiton Type d441a0f5030003000ecb744a08bb3746 Unknown GPT Partiton Type f8579a116b4a7aa931cde97a4b9b5c09 Unknown GPT Partiton Type 7229990415b77c0a1970e7e824237a3a Unknown GPT Partiton Type afb6e34d6b4bd8c7c0eada19a9786cc3 Unknown BootLoader on sda1/Wubi 00000000 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 |0000000000000000| * 00000200 Unknown BootLoader on sda2 00000000 e9 a7 00 52 45 43 4f 56 45 52 59 00 02 08 20 00 |...RECOVERY... .| 00000010 02 00 00 00 00 f8 00 00 3f 00 f0 00 7f b9 f4 11 |........?.......| 00000020 8c cd ac 00 1e 2b 00 00 00 00 00 00 02 00 00 00 |.....+..........| 00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 00000040 80 00 29 3b 02 cd 01 20 20 20 20 20 20 20 20 20 |..);... | 00000050 20 20 46 41 54 33 32 20 20 20 8b d0 c1 e2 02 80 | FAT32 ......| 00000060 e6 01 66 c1 e8 07 66 3b 46 f8 74 2a 66 89 46 f8 |..f...f;F.t*f.F.| 00000070 66 03 46 f4 66 0f b6 5e 28 80 e3 0f 74 0f 3a 5e |f.F.f..^(...t.:^| 00000080 10 0f 83 90 00 66 0f af 5e 24 66 03 c3 bb e0 07 |.....f..^$f.....| 00000090 b9 01 00 e8 cf 00 8b da 66 8b 87 00 7e 66 25 ff |........f...~f%.| 000000a0 ff ff 0f 66 3d f8 ff ff 0f c3 33 c9 8e d9 8e c1 |...f=.....3.....| 000000b0 8e d1 66 bc f4 7b 00 00 bd 00 7c 66 0f b6 46 10 |..f..{....|f..F.| 000000c0 66 f7 66 24 66 0f b7 56 0e 66 03 56 1c 66 89 56 |f.f$f..V.f.V.f.V| 000000d0 f4 66 03 c2 66 89 46 fc 66 c7 46 f8 ff ff ff ff |.f..f.F.f.F.....| 000000e0 66 8b 46 2c 66 50 e8 af 00 bb 70 00 b9 01 00 e8 |f.F,fP....p.....| 000000f0 73 00 bf 00 07 b1 0b be a9 7d f3 a6 74 2a 03 f9 |s........}..t*..| 00000100 83 c7 15 81 ff 00 09 72 ec 66 40 4a 75 db 66 58 |[email protected]| 00000110 e8 47 ff 72 cf be b4 7d ac 84 c0 74 09 b4 0e bb |.G.r...}...t....| 00000120 07 00 cd 10 eb f2 cd 19 66 58 ff 75 09 ff 75 0f |........fX.u..u.| 00000130 66 58 bb 00 20 66 83 f8 02 72 da 66 3d f8 ff ff |fX.. f...r.f=...| 00000140 0f 73 d2 66 50 e8 50 00 0f b6 4e 0d e8 16 00 c1 |.s.fP.P...N.....| 00000150 e1 05 03 d9 66 58 53 e8 00 ff 5b 72 d8 8a 56 40 |....fXS...[r..V@| 00000160 ea 00 00 00 20 66 60 66 6a 00 66 50 53 6a 00 66 |.... f`fj.fPSj.f| 00000170 68 10 00 01 00 8b f4 b8 00 42 8a 56 40 cd 13 be |h........B.V@...| 00000180 c7 7d 72 94 67 83 44 24 06 20 66 67 ff 44 24 08 |.}r.g.D$. fg.D$.| 00000190 e2 e3 83 c4 10 66 61 c3 66 48 66 48 66 0f b6 56 |.....fa.fHfHf..V| 000001a0 0d 66 f7 e2 66 03 46 fc c3 4e 54 4c 44 52 20 20 |.f..f.F..NTLDR | 000001b0 20 20 20 20 0d 0a 4e 6f 20 53 79 73 74 65 6d 20 | ..No System | 000001c0 44 69 73 6b 20 6f 72 0d 0a 44 69 73 6b 20 49 2f |Disk or..Disk I/| 000001d0 4f 20 65 72 72 6f 72 0d 0a 50 72 65 73 73 20 61 |O error..Press a| 000001e0 20 6b 65 79 20 74 6f 20 72 65 73 74 61 72 74 0d | key to restart.| 000001f0 0a 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.| 00000200 =============================== StdErr Messages: =============================== umount: /isodevice: device is busy. (In some cases useful info about processes that use the device is found by lsof(8) or fuser(1))

Read the article
How to set up a centralized backup server with lots of offsite workstations, intermittent internet connectivity, and stubborn users?

- by Zac B

This might be an impossible question. Context: We have a bunch of computers across around 1000 users. We have a centralized office where 900 of the users work, most of the time. Most of the computers are laptops. They are very frequently coming on and off the network for hours at a time. Users often take their computers home and do lots of work from home. In addition, there are a handful of users who work elsewhere in the country, who are offline (no internet connection whatsoever) for more than half of the time they use their machines. All of the machines are Windows 7/XP. Problem: People are always losing data. One day someone accidentally deletes a bunch of files. The next day someone else installs a bad driver or tries to mess with something in system32 and needs a personal data backup/reinstall of Windows. Because of how many of our business operations are done without an internet connection, and how frequently computers come on- and offline, it's unfeasible to make users use network storage for all of their data. We tried giving them Dropboxes, and they stored their files elsewhere. We bought and deployed Altiris, and they uninstalled it and blamed us when they couldn't get files back that they accidentally deleted while they were offline and hadn't taken a backup in months. We tried teaching them backup best-practices, and using scheduled sync tools to upload things to the network drives, and they turned them off because they "looked like viruses". It doesn't help that many of these users are pretty high up in the business and are not amicable to any sort of "you need to do something regularly because we say so" solution. Question: Other than finding another job where IT is treated differently and users are willing to follow best practices, how would people recommend I implement a file backup solution that supports the following: Backs up to a centralized server over LAN or WAN whenever a network link becomes available, or on a schedule. Supports interrupted/resumed backups (and hopefully file-delta only backups), since connections to the network (WAN or LAN) are often slow and only open for half an hour or so. Supports relatively rapid, "I accidentally deleted the TPS reports! Oh no!" single-file recovery, ideally administered from the central backup server rather than the client PC. Supports local-to-local file delta backup on a schedule, so that users without a network connection for a few days can still retrieve accidental deletions or whatnot. Ideally, the local stored backups would be pushed up to the server whenever network link is available. Isn't configurable on the clients without certain credentials. Because the CFOs (who won't give up their admin rights on the domain) will disable it if they can. Backs up the entire hard drive. There are people who are self-righteous about storing things in C:\, or in the recycle bin, or in the C:\Windows dir (yes, I know). I'm fine integrating multiple products/solutions, or scripting different programs together myself (I'm a somewhat competent programmer), but I've been drawing a blank on where to start. Dropbox is folder-specific, Altiris doesn't cope with LAN outages or interrupted/resumed backups, Volume Shadow Copy is awesome for a local-to-local solution, but I don't know how to push days of stored shadow copies up to a server in a 2 hour window of network access. The company is fine with spending decent money on this, thousands (USD) on a server, and hundreds on clients, if necessary. I want to emphasize that this isn't a shopping list request. While I wish there was a program out there that did what I want, I've looked pretty hard, and not found anything that fits the bill. Instead, I'm hoping for ideas on where to start hacking things together from scratch/from different technologies to make something stable that works. Cheers!

Read the article
SNTP, why do you mock me?!

- by Matthew

--- SOLVED SEE EDIT 5 --- My w2k3 pdc is configured as an authoritative time server. Other servers on the domain are able to sync with it if I manually specify it in the peer list. By if I try to sync from flags 'domhier', it wont resync; I get the error message The computer did not resync because no time data was available. I can only think that it is not querying the pdc. I also tried setting the registry as shown here (http://support.microsoft.com/kb/193825). But no luck (I have not restarted the server, I am hoping I wont have to since it is the pdc) If you would like any further information on my config, please let me know. Edit 1: I have set the w32time service config AnnouceFlags to 0x05 as documented here www.krr.org/microsoft/authoritative_time_servers.php and a number of other places. The PDC syncs to an external time source (ntp). I can get the stripchart on the client from the pdc no problems. The loginserver for the host I am trying to configure is shown as the pdc. Edit 2: The packet capture has revealed something interesting. The client is contacting the correct server, and getting a valid response but I still get the same error message. Here is the NTP excerpt from the client to the server Flags: 11.. .... = Leap Indicator: alarm condition (clock not synchronized) (3) ..01 1... = Version number: NTP Version 3 (3) .... .011 = Mode: client (3) Peer Clock Stratum: unspecified or unavailable (0) Peer Polling Interval: 10 (1024 sec) Peer Clock Precision: 0.015625 sec Root Delay: 0.0000 sec Root Dispersion: 1.0156 sec Reference Clock ID: NULL Reference Clock Update Time: Sep 1, 2010 05:29:39.8170 UTC Originate Time Stamp: NULL Receive Time Stamp: NULL Transmit Time Stamp: Nov 8, 2010 01:44:44.1450 UTC Key ID: DC080000 Here is the reply NTP excerpt from the server to the client Flags: 0x1c 00.. .... = Leap Indicator: no warning (0) ..01 1... = Version number: NTP Version 3 (3) .... .100 = Mode: server (4) Peer Clock Stratum: secondary reference (3) Peer Polling Interval: 10 (1024 sec) Peer Clock Precision: 0.00001 sec Root Delay: 0.1484 sec Root Dispersion: 0.1060 sec Reference Clock ID: 192.189.54.17 Reference Clock Update Time: Nov 8,2010 01:18:04.6223 UTC Originate Time Stamp: Nov 8, 2010 01:44:44.1450 UTC Receive Time Stamp: Nov 8, 2010 01:46:44.1975 UTC Transmit Time Stamp: Nov 8, 2010 01:46:44.1975 UTC Key ID: 00000000 Edit 3: dumpreg for paramters on pdc Value Name Value Type Value Data ------------------------------------------------------------------------ ServiceMain REG_SZ SvchostEntry_W32Time ServiceDll REG_EXPAND_SZ C:\WINDOWS\system32\w32time.dll NtpServer REG_SZ bhvmmgt01.domain.com,0x1 Type REG_SZ AllSync and config Value Name Value Type Value Data -------------------------------------------------------------------------- LastClockRate REG_DWORD 156249 MinClockRate REG_DWORD 155860 MaxClockRate REG_DWORD 156640 FrequencyCorrectRate REG_DWORD 4 PollAdjustFactor REG_DWORD 5 LargePhaseOffset REG_DWORD 50000000 SpikeWatchPeriod REG_DWORD 900 HoldPeriod REG_DWORD 5 LocalClockDispersion REG_DWORD 10 EventLogFlags REG_DWORD 2 PhaseCorrectRate REG_DWORD 7 MinPollInterval REG_DWORD 6 MaxPollInterval REG_DWORD 10 UpdateInterval REG_DWORD 100 MaxNegPhaseCorrection REG_DWORD -1 MaxPosPhaseCorrection REG_DWORD -1 AnnounceFlags REG_DWORD 5 MaxAllowedPhaseOffset REG_DWORD 300 FileLogSize REG_DWORD 10000000 FileLogName REG_SZ C:\Windows\Temp\w32time.log FileLogEntries REG_SZ 0-300 Edit 4: Here are some notables from the ntp log file on the pdc. ReadConfig: failed. Use default one 'TimeJumpAuditOffset'=0x00007080 DomainHierachy: we are now the domain root. ClockDispln: we're a reliable time service with no time source: LS: 0, TN: 864000000000, WAIT: 86400000 Edit 5: F&^%ING SOLVED! Ok so I was reading about people with similar problems, some mentioned w32time server settings applied by GPO, but I tested this early on and there were no settings applied to this service by gpo. Others said that the reporting software may not be picking up some old gpo settings applied. So I searched the registry for all w32time instaces. I came across an interesting key that indicated there may be some other ntp software running on the server. Sure enough, I look through the installed software list and there the little F*&%ER is. Uninstalled and now working like a dream. FFFFFFFUUUUUUUUUUUU

Read the article
Where to download replacement "Explorerframe.DLL" Files for x64 Windows 7 Pro?

- by Ben Franchuk

After posting this question, I did some research to reveal what the problem likely was, and found what I need to fix. Following this is the original post, then my updated question. A few months ago I ended up requiring to change my computer's SID to fix a problem it had been having- Instead of fixing the problem, though, it screwed up my at-the-time current install of windows, to the point of me needing to do a fresh install. As I am in possession of an OEM copy of Windows 7 Pro 64 Bit, I successfully reinstalled over the dead copy with that (all the files that were on the computer previous to this windows install were put in a Windows.old folder). Everything installed and worked absolutely fine, except for one thing. The problem I am experiencing is that, in some Windows Explorer windows, the explorer pane doesn't show. Instead, it simply shows a white area where the pane would show. This makes some software not usable, I recently realized; Software such as Cubase, which use just the explorer pane to select file save locations, cannot save at all as the pane itself is... not operational. Below is a screenshot of this problem as it occurs in cubase; ...and again as it shows in UTorrent in the save location selector window. The highlighted area is where the sidebar would NORMALLY be. Pardon my scribbling over some of the things in the window- I would personally rather the internet did not get a glimpse of my files. I have yet to find a common reason why the pane works in some applications when they pull explorer, and others not. I have yet to see it go away, and the software affected by it has been affected since I reinstalled my copy of windows. Initially, I was able to live with it as I can type out save locations in the file name bar to navigate, but with software like Cubase, I do not have this option. Reinstalling windows again is NOT an option. Here's the updated question. After posting this question originally, I did some research on the problem in question, and it turns out that this is extremely easily fixable via replacing the file "ExplorerFrame.DLL" which is located in the System32 and SystemWOW64 Folders, in the windows folder, on the C:\ drive. As I quite frequently customize my computer, this is a normal thing for me to do and I know exactly how to safely and properly replace this file. The only problem is that I cannot for the life of me find a download of this file that actually works with my computer. I tried a couple from some different sites but they all caused explorer to not restart (I was given an error when starting the application from Task Manager) and was forced to revert to the broken .DLL files. Since there are 2 separate "ExplorerFrame.DLL" files; one for 64 bit and the other for 32 bit, I am assuming that I will need to download 2 separate versions to replace the corrupted ones. Where can I acquire these files? I am currently running Windows 7 Professional x64 Bit.

Read the article
Windows Media Player won't launch on Vista - how to repair or reinstall it?

- by rpm1200

My friend asked me to look at her Acer Aspire laptop with Vista Home Premium as it is no longer playing DVDs. I found that Windows Media Player would not launch. I found this thread, which contained a number of suggestions, none of which solved the problem. Here is what I tried: Tried running WMP via desktop shortcut, QuickLaunch bar or going to Program Files\Windows Media Player\wmplayer.exe. In all cases, wmplayer would launch then terminate immediately (verified through the Processes tab in Task Manager). Tried running wmplayer.exe as Administrator. The UAC dialog would come up, I'd approve, then wmplayer would launch and terminate immediately. Uninstalled all non-Microsoft media programs except RealPlayer, iTunes, QuickTime, Acer Arcade (the laptop owner uses all those apps). Tried running Program Files\Windows Media Player\setup_wm.exe as Administrator, it launched but said that a newer version of WMP was already installed. Deleted the "Windows Media" folder located under %userprofile%\appdata\local\Microsoft then tried starting WMP - wmplayer would launch and terminate immediately. Register wmp.dll by typing "regsvr32 wmp.dll" in an Administrator cmd window then tried starting WMP - wmplayer would launch and terminate immediately. Run "SFC /SCANFILE" in an Administrator cmd window - get an error message that it found invalid system files and could not fix them, so look at the log file cbs.log. The log file shows that there are broken files associated with Windows Sidebar (which the user does not use) but none relating to WMP. Log off to safe mode and run "SFC /SCANFILE" in an Administrator cmd window again - same results. Try to download and install XP WMP - the microsoft.com site recognizes the OS as Genuine and allows the download, but when I launch the installer it says the system is not Genuine. Clicking the link directs me back to IE where I can authenticate the system as Genuine. The installer still fails to recognize the system as Genuine. It is a Genuine Vista installation. Try to run this update (KB931621). The installer said it did not apply to the system. Set Windows Media Player as default in Program Access and Defaults. Same results. Tried running "for %a in (%systemroot%\system32\wm*.dll) do regsvr32 /s %a" in an Administrator cmd window - same results. Went to this Knowledge Base article (947541) and ran the Microsoft Fix It. The Fix It ran successfully, but WMP would still launch and terminate immediately. Multiple reboots in the process of doing all of these steps. After all this, looked in the Application and Security logs. No events pertaining to WMP were logged. The computer was preinstalled with Vista Home Premium and I have the Acer backup DVDs which will reimage the drive. I do not have Vista install DVDs. Reimaging the system is not an option. I'd also rather not restore the system to an earlier point unless it's absolutely necessary. What else can I do to repair or reinstall WMP?

Read the article
Windows Media Player won't launch on Vista - how to repair or reinstall it?

- by rpm1200

My friend asked me to look at her Acer Aspire laptop with Vista Home Premium as it is no longer playing DVDs. I found that Windows Media Player would not launch. I found this thread, which contained a number of suggestions, none of which solved the problem. Here is what I tried: Tried running WMP via desktop shortcut, QuickLaunch bar or going to Program Files\Windows Media Player\wmplayer.exe. In all cases, wmplayer would launch then terminate immediately (verified through the Processes tab in Task Manager). Tried running wmplayer.exe as Administrator. The UAC dialog would come up, I'd approve, then wmplayer would launch and terminate immediately. Uninstalled all non-Microsoft media programs except RealPlayer, iTunes, QuickTime, Acer Arcade (the laptop owner uses all those apps). Tried running Program Files\Windows Media Player\setup_wm.exe as Administrator, it launched but said that a newer version of WMP was already installed. Deleted the "Windows Media" folder located under %userprofile%\appdata\local\Microsoft then tried starting WMP - wmplayer would launch and terminate immediately. Register wmp.dll by typing "regsvr32 wmp.dll" in an Administrator cmd window then tried starting WMP - wmplayer would launch and terminate immediately. Run "SFC /SCANFILE" in an Administrator cmd window - get an error message that it found invalid system files and could not fix them, so look at the log file cbs.log. The log file shows that there are broken files associated with Windows Sidebar (which the user does not use) but none relating to WMP. Log off to safe mode and run "SFC /SCANFILE" in an Administrator cmd window again - same results. Try to download and install XP WMP - the microsoft.com site recognizes the OS as Genuine and allows the download, but when I launch the installer it says the system is not Genuine. Clicking the link directs me back to IE where I can authenticate the system as Genuine. The installer still fails to recognize the system as Genuine. It is a Genuine Vista installation. Try to run this update (KB931621). The installer said it did not apply to the system. Set Windows Media Player as default in Program Access and Defaults. Same results. Tried running "for %a in (%systemroot%\system32\wm*.dll) do regsvr32 /s %a" in an Administrator cmd window - same results. Went to this Knowledge Base article (947541) and ran the Microsoft Fix It. The Fix It ran successfully, but WMP would still launch and terminate immediately. Multiple reboots in the process of doing all of these steps. After all this, looked in the Application and Security logs. No events pertaining to WMP were logged. The computer was preinstalled with Vista Home Premium and I have the Acer backup DVDs which will reimage the drive. I do not have Vista install DVDs. Reimaging the system is not an option. I'd also rather not restore the system to an earlier point unless it's absolutely necessary. What else can I do to repair or reinstall WMP?

Read the article
USB connection is unstable with Nexus S 2.3.4 on AMD 64 running 64-bit Windows 7, but works with 32-bit Windows Vista

- by Mike

The USB connection is unstable with Nexus S (Android 2.3.4) on AMD 64 running 64-bit Windows 7, but it works with 32-bit Windows Vista. Problem Description: On the 64-bit Windows 7 machine my Nexus S appears to connect, but then it disconnects moments later. Neither accessing USB storage or loading an Android application package file (APK) using the Android Debug Bridge (ADB) work. On 32-bit Windows Vista using the same USB cable, USB storage works. I haven't tried the ADB on 32-bit Windows Vista. Reproduction steps for USB storage: (I have provided the reproduction steps for USB storage and not ADB, because if one isn't working, then the other isn't working either and the USB storage reproduction steps are shorter to document.) Connect the USB cable to the Nexus S and my Windows 7 machine. Effect: The "USB Mass Storage, USB Connected" dialog appears with the button "Turn on USB storage." Click "Turn on USB Storage" Effect: The "working circle" appears. A dialog briefly appears saying "USB storage in use," then it either returns me to Step 1 (now that I am running 2.3.4) or is replaced with the Nexus S's application homepage (while I was running 2.3.3). I'm not sure if the version matters, but I mention it for completeness. On the 32-bit Windows Vista machine the connection is stable. I am able to navigate through the Nexus S file system create, read, update, and delete files, etc. I haven't tried connecting with the ADB. Troubleshooting summary: Tried and failed: Uninstalling and reinstalling the Android USB drivers including removing the files. Uninstalling my custom software Pulling the Nexus S's battery Restarting the Nexus S Restarting 64-bit Windows 7 Changing USB ports on the 64-bit Windows 7 box Compared the dates and file size on the DLLs in my google-usb_driver\amd64 directory and the windows\System32 directory. They match. The sizes for the google-usb_driver\i386 directory do not match (expected). Turning off Debugging mode on the Nexus S does not resolve the problem. Searching Google. Tried and succeeded: Connecting to another machine (Windows Vista) using the same USB cable and Nexus S phone. Troubleshooting observations: I notice that uninstalling the device drivers and deleting the files, then reinstalling the drivers, then rebooting 64-bit Windows 7 then unplugging the Nexus S, then plugging it back in occasionally helps for a short amount of time (minutes to hours, not days). When it is working, I can both access the Nexus S's drive and load/test applications using the ADB. I have observed some wonky behavior in the Device Manager that I haven't tracked down. Sometimes the black Nexus S image appears in the list of devices. Sometimes the image displays as a computer with a green ISA card. Sometimes it neither appears on the top level of devices nor under “other devices,” but it does appear under "disk drives" as "Android UMS Composite USB Device." System configuration: The Nexus S is running Android OS 2.3.4's "Settings\about phone\System updates" indicates that it is up to date as of May 21st 2011. Both 32-bit Windows Vista and 64-bit Windows 7 are up to date. The Windows Vista system is running on an Intel 32-bit processor. Windows 7 is running on an AMD 64-bit processor. I have done Android development on both systems, but I usually develop on the 64-bit Windows 7 machine.

Read the article
What is Causing this IIS 7 Web Service Sporadic Connectivity Error?

- by dpalau

On sporadic occasions we receive the following error when attempting to call an .asmx web service from a .Net client application: "The underlying connection was closed: A connection that was expected to be kept alive was closed by the server. Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host." By sporadic I mean that it might occur zero, once every few days, or a half-dozen times a day for some users. It will never occur for the first web service call of a user. And the subsequent (usually the same) call will always work immediately after the failure. The failures happen across a variety of methods in the service and usually happens between 15-20 seconds (according to the log) from the time of the request. Looking in the IIS site log for the particular call will show one or the other of the following windows error codes: 121: The semaphore timeout period has elapsed. 1236: The network connection was aborted by the local system. Some additional environment details: Running on internal network web farm consisting of two servers running IIS7 on Windows Server 2008 OS. These problems did not occur when running in an older IIS6 web farm of three servers running on Windows Server 2003 (and we use a single IIS6/2003 instance for our development and staging environments with no issues). EDIT: Also, all of these server instances are VMWare virtual machines, not sure if that is a surprise anymore or not. The web service is a .Net 2.0/3.5 compiled .asmx web service that has its own application pool (.Net 2.0, integrated pipeline). Only has Windows Authentication enabled. We have another web service on the farm that uses the same physical path as the primary service, the only difference being that Basic Authentication is enabled. This is used for a portion of our ERP system. Have tried using the same and different application pool - no effect on the error. This site isn't hit as often as the primary site and has never had an error. As mentioned, the error will only happen when called from the .Net client - not from other applications. The client application is always creating a new web service object for each request and setting the service credentials to System.Net.CredentialCache.DefaultCredentials. The application is either deployed locally to a client or run in a Citrix server session. Those users running in Citrix doesn't seem to experience the issue, only locally deployed clients. The Citrix servers and the web farm are located in the same physical location and are located in the same IP range (10.67.xx.xx). Locally deployed clients experiencing the error are located elsewhere (10.105.xx.xx, 10.31.xx.xx). I've checked the OS logs to see if I can see any problems but nothing really sticks out. EDIT: Actually, I myself just ran into the error a little bit ago. I decided to check out the logs again and saw that there was a Security log entry of "Audit Failure" at the 'same' time (IIS log entry at 1:39:59, event log entry at 1:39:50). Not sure if this is a coincidence or not, I'll have to check out the logs of previous errors. I'm probably grasping for straws but the details: Log Name: Security Source: Microsoft-Windows-Security-Auditing Date: 7/8/2009 1:39:50 PM Event ID: 5159 Task Category: Filtering Platform Connection Level: Information Keywords: Audit Failure User: N/A Computer: is071019.<**.net Description: The Windows Filtering Platform has blocked a bind to a local port. Application Information: Process ID: 1260 Application Name: \device\harddiskvolume1\windows\system32\svchost.exe Network Information: Source Address: 0.0.0.0 Source Port: 54802 Protocol: 17 Filter Information: Filter Run-Time ID: 0 Layer Name: Resource Assignment Layer Run-Time ID: 36 I've also tried to use Failed Request Tracing in IIS7 but the service call never actually gets to where FRT can capture it (even though the failure is logged in the web service log). The network infrastructure group said they checked out the DNS and any NIC settings are correct so there is no 'flapping'. Everything pans out. I'm not sure that they checked out any domain controller servers though to see if that could be an issue. Any ideas? Or any other debugging strategies to get to the bottom of this? I'm just the developer in charge of the software and don't really have the knowledge on what to investigate from the networking side of things - although it does sound like a networking issue to me based on what is happening. Thanks in advance for any help.

Read the article
IIS7 FTP Setup - An error occured during the authentication process. 530 End Login failed

- by robmzd

I'm having a problem very similar to IIS 7.5 FTP IIS Manager Users Login Fail (530) on Windows Server 2008 R2 Standard. I have created an FTP site and IIS Manager user but am having trouble logging in. I could really do with getting this working with the IIS Manager user rather than by creating a new system user since I'm fairly restricted with those accounts. Here is the output when connecting locally through command prompt: C:\Windows\system32>ftp localhost Connected to MYSERVER. 220 Microsoft FTP Service User (MYSERVER:(none)): MyFtpLogin 331 Password required for MyFtpLogin. Password: *** 530-User cannot log in. Win32 error: Logon failure: unknown user name or bad password. Error details: An error occured during the authentication process. 530 End Login failed. I have followed the guide to configure ftp with iis manager authentication in iis 7 and Adding FTP Publishing to a Web Site in IIS 7 Things I have done and checked: The FTP Service is installed (along with FTP Extensibility). Local Service and Network Service have been given access to the site folder Permission has been given to the config files Granted read/write permissions to the FTP Root folder The Management Service is installed and running Enable remote connections is ticked with 'Windows credentials or IIS manager credentials' selected The IIS Manager User has been added to the server (root connection in the IIS connections branch) The new FTP site has been added IIS Manager Authentication has been added to the FTP authentication providers The IIS Manager user has been added to the IIS Manager Permissions list for the site Added Read/Write permissions for the user in the FTP Authorization Rules Here's a section of the applicationHost config file associated with the FTP site <site name="MySite" id="8"> <application path="/" applicationPool="MyAppPool"> <virtualDirectory path="/" physicalPath="D:\Websites\MySite" /> </application> <bindings> <binding protocol="http" bindingInformation="*:80:www.mydomain.co.uk" /> <binding protocol="ftp" bindingInformation="*:21:www.mydomain.co.uk" /> </bindings> <ftpServer> <security> <ssl controlChannelPolicy="SslAllow" dataChannelPolicy="SslAllow" /> <authentication> <basicAuthentication enabled="true" /> <customAuthentication> <providers> <add name="IisManagerAuth" enabled="true" /> </providers> </customAuthentication> </authentication> </security> </ftpServer> </site> ... <location path="MySite"> <system.ftpServer> <security> <authorization> <add accessType="Allow" users="MyFtpLogin" permissions="Read, Write" /> </authorization> </security> </system.ftpServer> </location> If I connect to the Site (not FTP) from my local IIS Manager using the same IIS Manager account details then it connects fine, I can browse files and change settings as I would locally (though I don't seem to have an option to upload files). Trying to connect via FTP though either through the browser or FileZilla etc... gives me: Status: Resolving address of www.mydomain.co.uk Status: Connecting to 123.456.12.123:21... Status: Connection established, waiting for welcome message... Response: 220 Microsoft FTP Service Command: USER MyFtpLogin Response: 331 Password required for MyFtpLogin. Command: PASS ********* Response: 530 User cannot log in. Error: Critical error Error: Could not connect to server I have tried collecting etw traces for ftp sessions, in the logs I get a FailBasicLogon followed by a FailCustomLogon, but no other info: FailBasicLogon SessionId={cad26a97-225d-45ba-ab1f-f6acd9046e55} | ErrorCode=0x8007052E StartCustomLogon SessionId={cad26a97-225d-45ba-ab1f-f6acd9046e55} | LogonProvider=IisManagerAuth StartCallProvider SessionId={cad26a97-225d-45ba-ab1f-f6acd9046e55} | provider=IisManagerAuth EndCallProvider SessionId={cad26a97-225d-45ba-ab1f-f6acd9046e55} EndCustomLogon SessionId={cad26a97-225d-45ba-ab1f-f6acd9046e55} FailCustomLogon SessionId={cad26a97-225d-45ba-ab1f-f6acd9046e55} | ErrorCode=0x8007052E FailFtpCommand SessionId={cad26a97-225d-45ba-ab1f-f6acd9046e55} | ReturnValue=0x8007052E | SubStatus=ERROR_DURING_AUTHENTICATION In the normal FTP logs I just get: 2012-10-23 16:13:11 123.456.12.123 - 123.456.12.123 21 ControlChannelOpened - - 0 0 e2d4e935-fb31-4f2c-af79-78d75d47c18e - 2012-10-23 16:13:11 123.456.12.123 - 123.456.12.123 21 USER MyFtpLogin 331 0 0 e2d4e935-fb31-4f2c-af79-78d75d47c18e - 2012-10-23 16:13:11 123.456.12.123 - 123.456.12.123 21 PASS *** 530 1326 41 e2d4e935-fb31-4f2c-af79-78d75d47c18e - 2012-10-23 16:13:11 123.456.12.123 - 123.456.12.123 21 ControlChannelClosed - - 0 0 e2d4e935-fb31-4f2c-af79-78d75d47c18e - If anyone has any ideas than I would be very grateful to hear them. Many thanks.

Read the article

Search Results

Search found 834 results on 34 pages for 'system32'.

Page 32/34 | < Previous Page | 28 29 30 31 32 33 34 | Next Page >

- by Nico

- by Thorn007

- by kampi

- by Ninad

- by user993250

- by Zakaria

- by teqnomad

- by Goober

- by wweicker

- by Matthew Guay

- by Trevor Bekolay

- by user219950

- by Sung Meister

- by Josh

- by Praveen Kumar

- by Nic

- by LearnCode

- by Zac B

- by Matthew

- by Ben Franchuk

- by rpm1200

- by rpm1200

- by Mike

- by dpalau

- by robmzd

< Previous Page | 28 29 30 31 32 33 34 | Next Page >