Search Results

Search found 41366 results on 1655 pages for 'update software'.

Page 32/1655 | < Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >

  • Software RAID 1 Configuration

    - by Corve
    I have created a software RAID 1 quite some while ago and it always seemed to work for me. However I am not completely sure that I have configured everything right and do not have the experience to check so I would be very grateful for some advice or just verification that all seems right so far. I am using Linux Fedora 20 (32 bit with plans to upgrade to 64bit) The RAID 1 should consist of two 1TB SATA hard drives. This is the output of mdadm --detail /dev/md0 /dev/md0: Version : 1.2 Creation Time : Sun Jan 29 11:25:18 2012 Raid Level : raid1 Array Size : 976761424 (931.51 GiB 1000.20 GB) Used Dev Size : 976761424 (931.51 GiB 1000.20 GB) Raid Devices : 2 Total Devices : 1 Persistence : Superblock is persistent Update Time : Sat Jun 7 10:38:09 2014 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 0 Spare Devices : 0 Name : argo:0 (local to host argo) UUID : 1596d0a1:5806e590:c56d0b27:765e3220 Events : 996387 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 0 1 active sync /dev/sda The RAID is mounted successfully: friedrich@argo:~ ? sudo mount -l | grep md0 /dev/md0 on /mnt/raid type ext4 (rw,relatime,data=ordered) Basically my question are: Why do I only have 1 active device? What does the State removed at bottom mean? Also I noticed some strange error messages that I see on the console on system start and shutdown and always repeating in the background when I switch with Ctrl + Alt + F2: ... ata2: irq_stat 0x00000040 connection status changed ata2: SError: { CommWake DevExch } ata2: COMRESET failed (errno=-32) ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen ata2: irq_stat 0x00000040 connection status changed ata2: SError: { CommWake DevExch } ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen ... Are these errors related to the RAID? Something seems wrong with the SATA devices.. All together the system works (I can read and write to the mounted raid) but I always had these strange errors on startup shutdown (probably always in the background). Thx for your help

    Read the article

  • Do software developers know what engineers actually do?

    - by lorin
    Software development is often contrasted with the traditional branches of engineering, most commonly civil or mechanical engineering. For example: "Software development isn't like engineering, it's like craftsmanship!" "Software development isn't like engineering, but it should be!" Do software developers understand what it is that engineers do and how they do it? At least, do they understand it well enough to be able to make an informed comparison with what software developers do?

    Read the article

  • How to Tell a Hardware Problem From a Software Problem

    - by Chris Hoffman
    Your computer seems to be malfunctioning — it’s slow, programs are crashing or Windows may be blue-screening. Is your computer’s hardware failing, or does it have a software problem that you can fix on your own? This can actually be a bit tricky to figure out. Hardware problems and software problems can lead to the same symptoms — for example, frequent blue screens of death may be caused by either software or hardware problems. Computer is Slow We’ve all heard the stories — someone’s computer slows down over time because they install too much software that runs at startup or it becomes infected with malware. The person concludes that their computer is slowing down because it’s old, so they replace it. But they’re wrong. If a computer is slowing down, it has a software problem that can be fixed. Hardware problems shouldn’t cause your computer to slow down. There are some rare exceptions to this — perhaps your CPU is overheating and it’s downclocking itself, running slower to stay cooler — but most slowness is caused by software issues. Blue Screens Modern versions of Windows are much more stable than older versions of Windows. When used with reliable hardware with well-programmed drivers, a typical Windows computer shouldn’t blue-screen at all. If you are encountering frequent blue screens of death, there’s a good chance your computer’s hardware is failing. Blue screens could also be caused by badly programmed hardware drivers, however. If you just installed or upgraded hardware drivers and blue screens start, try uninstalling the drivers or using system restore — there may be something wrong with the drivers. If you haven’t done anything with your drivers recently and blue screens start, there’s a very good chance you have a hardware problem. Computer Won’t Boot If your computer won’t boot, you could have either a software problem or a hardware problem. Is Windows attempting to boot and failing part-way through the boot process, or does the computer no longer recognize its hard drive or not power on at all? Consult our guide to troubleshooting boot problems for more information. When Hardware Starts to Fail… Here are some common components that can fail and the problems their failures may cause: Hard Drive: If your hard drive starts failing, files on your hard drive may become corrupted. You may see long delays when you attempt to access files or save to the hard drive. Windows may stop booting entirely. CPU: A failing CPU may result in your computer not booting at all. If the CPU is overheating, your computer may blue-screen when it’s under load — for example, when you’re playing a demanding game or encoding video. RAM: Applications write data to your RAM and use it for short-term storage. If your RAM starts failing, an application may write data to part of the RAM, then later read it back and get an incorrect value. This can result in application crashes, blue screens, and file corruption. Graphics Card: Graphics card problems may result in graphical errors while rendering 3D content or even just while displaying your desktop. If the graphics card is overheating, it may crash your graphics driver or cause your computer to freeze while under load — for example, when playing demanding 3D games. Fans: If any of the fans fail in your computer, components may overheat and you may see the above CPU or graphics card problems. Your computer may also shut itself down abruptly so it doesn’t overheat any further and damage itself. Motherboard: Motherboard problems can be extremely tough to diagnose. You may see occasional blue screens or similar problems. Power Supply: A malfunctioning power supply is also tough to diagnose — it may deliver too much power to a component, damaging it and causing it to malfunction. If the power supply dies completely, your computer won’t power on and nothing will happen when you press the power button. Other common problems — for example, a computer slowing down — are likely to be software problems. It’s also possible that software problems can cause many of the above symptoms — malware that hooks deep into the Windows kernel can cause your computer to blue-screen, for example. The Only Way to Know For Sure We’ve tried to give you some idea of the difference between common software problems and hardware problems with the above examples. But it’s often tough to know for sure, and troubleshooting is usually a trial-and-error process. This is especially true if you have an intermittent problem, such as your computer blue-screening a few times a week. You can try scanning your computer for malware and running System Restore to restore your computer’s system software back to its previous working state, but these aren’t  guaranteed ways to fix software problems. The best way to determine whether the problem you have is a software or hardware one is to bite the bullet and restore your computer’s software back to its default state. That means reinstalling Windows or using the Refresh or reset feature on Windows 8. See whether the problem still persists after you restore its operating system to its default state. If you still see the same problem – for example, if your computer is blue-screening and continues to blue-screen after reinstalling Windows — you know you have a hardware problem and need to have your computer fixed or replaced. If the computer crashes or freezes while reinstalling Windows, you definitely have a hardware problem. Even this isn’t a completely perfect method — for example, you may reinstall Windows and install the same hardware drivers afterwards. If the hardware drivers are badly programmed, the blue-screens may continue. Blue screens of death aren’t as common on Windows these days — if you’re encountering them frequently, you likely have a hardware problem. Most blue screens you encounter will likely be caused by hardware issues. On the other hand, other common complaints like “my computer has slowed down” are easily fixable software problems. When in doubt, back up your files and reinstall Windows. Image Credit: Anders Sandberg on Flickr, comedy_nose on Flickr     

    Read the article

  • TestRail 1.3 Test Management Software released

    Gurock Software just announced version 1.3 of its test management software TestRail. TestRail is a web-based test case management software that helps software development teams and QA departments to efficiently manage, track and organize their software testing efforts.

    Read the article

  • Understanding Software Development Process

    Software development means, creating software to fulfill the specific needs of the customers. Depending upon their requirements, the software outsourcing firms develop customized software solutions. The client requirement can be an open source software or program for personal use.

    Read the article

  • when i marked all check boxes in settings,update fails.

    - by user67966
    "W:Failed to fetch cdrom://Ubuntu 12.04 LTS Precise Pangolin - Release i386 (20120423)/dists/precise/main/binary-i386/Packages Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update cannot be used to add new CD-ROMs , W:Failed to fetch cdrom://Ubuntu 12.04 LTS Precise Pangolin - Release i386 (20120423)/dists/precise/restricted/binary-i386/Packages Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update cannot be used to add new CD-ROMs , E:Some index files failed to download. They have been ignored, or old ones used instead." the above information is a crash info.It happens when i manually update ubuntu.I have marked all check-boxes in settings which was by default not marked. What is the main reason for this problem?

    Read the article

  • Return pre-UPDATE column values in PostgreSQL without using triggers, functions or other "magic"

    - by Python Larry
    I have a related question, but this is another part of MY puzzle. I would like to get the OLD VALUE of a Column from a Row that was UPDATEd... WITHOUT using Triggers (nor Stored Procedures, nor any other extra, non-SQL/-query entities). The query I have is like this: UPDATE my_table SET processing_by = our_id_info -- unique to this instance WHERE trans_nbr IN ( SELECT trans_nbr FROM my_table GROUP BY trans_nbr HAVING COUNT(trans_nbr) > 1 LIMIT our_limit_to_have_single_process_grab ) RETURNING row_id If I could do "FOR UPDATE ON my_table" at the end of the subquery, that'd be devine (and fix my other question/problem). But, that won't work: can't have this AND a "GROUP BY" (which is necessary for figuring out the COUNT of trans_nbr's). Then I could just take those trans_nbr's and do a query first to get the (soon-to-be-) former processing_by values. I've tried doing like: UPDATE my_table SET processing_by = our_id_info -- unique to this instance FROM my_table old_my_table JOIN ( SELECT trans_nbr FROM my_table GROUP BY trans_nbr HAVING COUNT(trans_nbr) > 1 LIMIT our_limit_to_have_single_process_grab ) sub_my_table ON old_my_table.trans_nbr = sub_my_table.trans_nbr WHERE my_table.trans_nbr = sub_my_table.trans_nbr AND my_table.processing_by = old_my_table.processing_by RETURNING my_table.row_id, my_table.processing_by, old_my_table.processing_by But that can't work; "old_my_table" is not viewable outside of the join; the RETURNING clause is blind to it. I've long since lost count of all the attempts I've made; I have been researching this for literally hours. If I could just find a bullet-proof way to lock the rows in my subquery - and ONLY those rows, and WHEN the subquery happens - all the concurrency issues I'm trying to avoid disappear... UPDATE: [WIPES EGG OFF FACE] Okay, so I had a typo in the non-generic code of the above that I wrote "doesn't work"; it does... thanks to Erwin Brandstetter, below, who stated it would, I re-did it (after a night's sleep, refreshed eyes, and a banana for bfast). Since it took me so long/hard to find this sort of solution, perhaps my embarrassment is worth it? At least this is on SO for posterity now... : What I now have (that works) is like this: UPDATE my_table SET processing_by = our_id_info -- unique to this instance FROM my_table AS old_my_table WHERE trans_nbr IN ( SELECT trans_nbr FROM my_table GROUP BY trans_nbr HAVING COUNT(*) > 1 LIMIT our_limit_to_have_single_process_grab ) AND my_table.row_id = old_my_table.row_id RETURNING my_table.row_id, my_table.processing_by, old_my_table.processing_by AS old_processing_by The COUNT(*) is per a suggestion from Flimzy in a comment on my other (linked above) question. (I was more specific than necessary. [In this instance.])

    Read the article

  • Large number of UPDATE queries slowing down page

    - by Bryan Lewis
    I am reading and validating large fixed-width text files (range from 10-50K lines) that are submitted via our ASP.net website (coded in VB.Net). I do an initial scan of the file to check for basic issues (line length, etc). Then I import each row into a MS SQL table. Each DB rows basically consists of a record_ID (Primary, auto-incrementing) and about 50 varchar fields. After the insert is done, I run a validation function on the file that checks each field in each row based on a bunch of criteria (trimmed length, isnumeric, range checks, etc). If it finds an error in any field, it inserts a record into the Errors table, which has an error_ID, the record_ID and an error message. In addition, if the field fails in a particular way, I have to do a "reset" on that field. A reset might consist of blanking the entire field, or simply replacing the value with another value (e.g. replacing the string with a new one that has all illegals chars taken out). I have a 5,000 line test file. The upload, initial check, and import takes about 5-6 seconds. The detailed error check and insert into the Errors table takes about 5-8 seconds (this file has about 1200 errors in it). However, the "resets" part takes about 40-45 seconds for 750 fields that need to be reset. When I comment out the resets function (returning immediately without actually calling the UPDATE stored proc), the process is very fast. With the resets turned on, the pages take 50 seconds to return. My UPDATE stored proc is using some recommended code from http://sommarskog.se/dynamic_sql.html, whereby it uses CASE instead of dynamic SQL: UPDATE dbo.Records SET dbo.Records.file_ID = CASE @field_name WHEN 'file_ID' THEN @field_value ELSE file_ID END, . . (all 50 varchar field CASE statements here) . WHERE dbo.Records.record_ID = @record_ID Is there any way I can help my performance here. Can I somehow group all of these UPDATE calls into a single transaction? Should I be reworking the UPDATE query somehow? Or is it just sheer quantity of 750+ UPDATEs and things are just slow (it's a quad proc server with 8GB ram). Any suggestions appreciated.

    Read the article

  • Software/IT security training and certificate

    - by 5YrsLaterDBA
    I am thinking about attending software security training and getting software security certificate. (or IT security in general.) I am in MA Boston area. I am new in software security field and need to know this field for current project and/or future job. Any suggestion about the training and certificate? thanks, EDIT: How about this course and certificate? http://scpd.stanford.edu/public/category/courseCategoryCertificateProfile.do?method=load&from=courseprofile&certificateId=3575647#searchResults

    Read the article

  • Update iPhone UIProgressView during NSURLConnection download.

    - by Scott Pendleton
    I am using this code: NSURLConnection *oConnection=[[NSURLConnection alloc] initWithRequest:oRequest delegate:self]; to download a file, and I want to update a progress bar on a subview that I load. For that, I use this code: - (void)connection:(NSURLConnection *)connection didReceiveData:(NSData *)data { [oReceivedData appendData:data]; float n = oReceivedData.length; float d = self.iTotalSize; NSNumber *oNum = [NSNumber numberWithFloat:n/d]; self.oDPVC.oProgress.progress = [oNum floatValue]; } The subview is oDPVC, and the progress bar on it is oProgress. Setting the progress property does not update the control. From what I have read on the Web, lots of people want to do this and yet there is not a complete, reliable sample. Also, there is much contradictory advice. Some people think that you don't need a separate thread. Some say you need a background thread for the progress update. Some say no, do other things in the background and update the progress on the main thread. I've tried all the advice, and none of it works for me. One more thing, maybe this is a clue. I use this code to load the subview during applicationDidFinishLaunching: self.oDPVC = [[DownloadProgressViewController alloc] initWithNibName:@"DownloadProgressViewController" bundle:nil]; [window addSubview:self.oDPVC.view]; In the XIB file (which I have examined in both Interface Builder and in a text editor) the progress bar is 280 pixels wide. But when the view opens, it has somehow been adjusted to maybe half that width. Also, the background image of the view is default.png. Instead of appearing right on top of the default image, it is shoved up about 10 pixels, leaving a white bar across the bottom of the screen. Maybe that's a separate issue, maybe not.

    Read the article

  • What software license to use for commercial software?

    - by GONeale
    Hey there, Under what license agreement should you release software under if it's closed-source and for commercial use only? Are there multiple license types? (such with open source you have BSD, GNU/GPL etc..) If so, which one do I choose, and are there samples out there to get you started? I have heard the term and seen documents named EULA.txt for an End User License Agreement, but can't seem to find a definitive guide on the net as to how to structure one but do see this included with nearly every commercial app I have installed and don't know if it's as simple just to "change to suit your business". Can anyone shed some more light on this? Thanks guys. For further details - our software is non-redistributable, non-modifiable and the user is charged yearly.

    Read the article

  • Should software engineers take the upcoming PE exam for software engineering?

    - by jschmier
    I realize that this question is quite similar to this one, but news of a PE exam being developed specifically for software engineering by the NCEES and IEEE has piqued my interest. Should software engineering professionals take the (upcoming) PE exam for software engineering in addition to their degree (or relevant work experience)? Note: I realize the exam being developed is still sometime away, but I'm curious about the thoughts of the professionals active on Stack Overflow.

    Read the article

  • What makes good software good?

    - by Jonta
    People probably have a lot of different answers here, like good...: scalability, speed, usability, stability, consistency, completeness, absence of bugs, accessibility, documentation, code-quality and so on. There are a lot of philosophies on development of software. Like the UNIX-philosophy. Often vague and not easy to understand. I am looking for statements such as the one cited below. Which you can ask about the software when it's in the design-stage, is ready to be coded, and has been coded and is ready for launch. The software I am talking about, is of course the software made for the end-user. Ken Rockwell wrote: "I expect that it will let me get more accomplished in less time." (Here one could ask "will this let me get more accomplished in less time?")

    Read the article

  • PowerShell: How to find and uninstall a MS Office Update

    - by Hank
    I've been hunting for a clean way to uninstall an MSOffice security update on a large number of workstations. I've found some awkward solutions, but nothing as clean or general like using PowerShell and get-wmiobject with Win32_QuickFixEngineering and the .Uninstall method on the resulting object. [Apparently, Win32_QuickFixEngineering only refers to Windows patches. See: http://social.technet.microsoft.com/Forums/en/winserverpowershell/thread/93cc0731-5a99-4698-b1d4-8476b3140aa3 ] Question 1: Is there no way to use get-wmiobject to find MSOffice updates? There are so many classes and namespaces, I have to wonder. This particualar Office update (KB978382) can be found in the registry here (for Office Ultimate): HKLM\Software\Microsoft\Windows\CurrentVersion\Uninstall\{91120000-002E-0000-0000-0000000FF1CE}_ULTIMATER_{6DE3DABF-0203-426B-B330-7287D1003E86} which kindly shows the uninstall command of: msiexec /package {91120000-002E-0000-0000-0000000FF1CE} /uninstall {6DE3DABF-0203-426B-B330-7287D1003E86} and the last GUID seems constant between different versions of Office. I've also found the update like this: $wu = new-object -com "Microsoft.Update.Searcher" $wu.QueryHistory(0,$wu.GetTotalHistoryCount()) | where {$_.Title -match "KB978382"} I like this search because it doesn't require any poking around in the registry, but: Question 2: If I've found it like this, what can I do with the found information to facilitate the Uninstall? Thanks

    Read the article

  • Why can't I set boolean columns with update?

    - by Benjamin Oakes
    I'm making a user administration page. For the system I'm creating, users need to be approved. Sometimes, there will be many users to approve, so I'd like to make that easy. I'm storing this as a boolean column called approved. I remembered the Edit Multiple Individually Railscast and thought it would be a great fit. However, I'm running into problems which I traced back to ActiveRecord::Base#update. update works fine in this example: >> User.all.map(&:username) => ["ben", "fred"] >> h = {"1"=>{'username'=>'benjamin'}, "2"=>{"username"=>'frederick'}} => {"1"=>{"username"=>"benjamin"}, "2"=>{"username"=>"frederick"}} >> User.update(h.keys, h.values) => ... >> User.all.map(&:username) => ["benjamin", "frederick"] But not this one: >> User.all.map(&:approved) => [true, nil] >> h = {"1"=>{'approved'=>'1'}, "2"=>{'approved'=>'1'}} >> User.update(h.keys, h.values) => ... >> User.all.map(&:approved) => [true, nil] Chaging from '1' to true didn't make a difference when I tested. What am I doing wrong?

    Read the article

  • Database not updating after UPDATE SQL statement in ASP.net

    - by Ronnie
    I currently have a problem attepting to update a record within my database. I have a webpage that displays in text boxes a users details, these details are taken from the session upon login. The aim is to update the details when the user overwrites the current text in the text boxes. I have a function that runs when the user clicks the 'Save Details' button and it appears to work, as i have tested for number of rows affected and it outputs 1. However, when checking the database, the record has not been updated and I am unsure as to why. I've have checked the SQL statement that is being processed by displaying it as a label and it looks as so: UPDATE [users] SET [email]=@email, [firstname]=@firstname, [lastname]=@lastname, [promo]=@promo WHERE ([users].[user_id] = 16) The function and other relevant code is: Sub Button1_Click(sender As Object, e As EventArgs) changeDetails(emailBox.text, firstBox.text, lastBox.text, promoBox.text) End Sub Function changeDetails(ByVal email As String, ByVal firstname As String, ByVal lastname As String, ByVal promo As String) As Integer Dim connectionString As String = "Provider=Microsoft.Jet.OLEDB.4.0; Ole DB Services=-4; Data Source=C:\Documents an"& _ "d Settings\Paul Jarratt\My Documents\ticketoffice\datab\ticketoffice.mdb" Dim dbConnection As System.Data.IDbConnection = New System.Data.OleDb.OleDbConnection(connectionString) Dim queryString As String = "UPDATE [users] SET [email]=@email, [firstname]=@firstname, [lastname]=@lastname, "& _ "[promo]=@promo WHERE ([users].[user_id] = " + session.contents.item("ID") + ")" Dim dbCommand As System.Data.IDbCommand = New System.Data.OleDb.OleDbCommand dbCommand.CommandText = queryString dbCommand.Connection = dbConnection Dim dbParam_email As System.Data.IDataParameter = New System.Data.OleDb.OleDbParameter dbParam_email.ParameterName = "@email" dbParam_email.Value = email dbParam_email.DbType = System.Data.DbType.[String] dbCommand.Parameters.Add(dbParam_email) Dim dbParam_firstname As System.Data.IDataParameter = New System.Data.OleDb.OleDbParameter dbParam_firstname.ParameterName = "@firstname" dbParam_firstname.Value = firstname dbParam_firstname.DbType = System.Data.DbType.[String] dbCommand.Parameters.Add(dbParam_firstname) Dim dbParam_lastname As System.Data.IDataParameter = New System.Data.OleDb.OleDbParameter dbParam_lastname.ParameterName = "@lastname" dbParam_lastname.Value = lastname dbParam_lastname.DbType = System.Data.DbType.[String] dbCommand.Parameters.Add(dbParam_lastname) Dim dbParam_promo As System.Data.IDataParameter = New System.Data.OleDb.OleDbParameter dbParam_promo.ParameterName = "@promo" dbParam_promo.Value = promo dbParam_promo.DbType = System.Data.DbType.[String] dbCommand.Parameters.Add(dbParam_promo) Dim rowsAffected As Integer = 0 dbConnection.Open Try rowsAffected = dbCommand.ExecuteNonQuery Finally dbConnection.Close End Try labelTest.text = rowsAffected.ToString() if rowsAffected = 1 then labelSuccess.text = "* Your details have been updated and saved" else labelError.text = "* Your details could not be updated" end if End Function Any help would be greatly appreciated.

    Read the article

  • conditional update records mysql query

    - by Shakti Singh
    Hi, Is there any single msql query which can update customer DOB? I want to update the DOB of those customers which have DOB greater than current date. example:- if a customer have dob 2034 update it to 1934 , if have 2068 updated with 1968. There was a bug in my system if you enter date less than 1970 it was storing it as 2070. The bug is solved now but what about the customers which have wrong DOB. So I have to update their DOB. All customers are stored in customer_entity table and the entity_id is the customer_id Details is as follows:- desc customer_entity -> ; +------------------+----------------------+------+-----+---------------------+----------------+ | Field | Type | Null | Key | Default | Extra | +------------------+----------------------+------+-----+---------------------+----------------+ | entity_id | int(10) unsigned | NO | PRI | NULL | auto_increment | | entity_type_id | smallint(8) unsigned | NO | MUL | 0 | | | attribute_set_id | smallint(5) unsigned | NO | | 0 | | | website_id | smallint(5) unsigned | YES | MUL | NULL | | | email | varchar(255) | NO | MUL | | | | group_id | smallint(3) unsigned | NO | | 0 | | | increment_id | varchar(50) | NO | | | | | store_id | smallint(5) unsigned | YES | MUL | 0 | | | created_at | datetime | NO | | 0000-00-00 00:00:00 | | | updated_at | datetime | NO | | 0000-00-00 00:00:00 | | | is_active | tinyint(1) unsigned | NO | | 1 | | +------------------+----------------------+------+-----+---------------------+----------------+ 11 rows in set (0.00 sec) And the DOB is stored in the customer_entity_datetime table the column value contain the DOB. but in this table values of all other attribute are also stored such as fname,lname etc. So the attribute_id with value 11 is DOB attribute. mysql> desc customer_entity_datetime; +----------------+----------------------+------+-----+---------------------+----------------+ | Field | Type | Null | Key | Default | Extra | +----------------+----------------------+------+-----+---------------------+----------------+ | value_id | int(11) | NO | PRI | NULL | auto_increment | | entity_type_id | smallint(8) unsigned | NO | MUL | 0 | | | attribute_id | smallint(5) unsigned | NO | MUL | 0 | | | entity_id | int(10) unsigned | NO | MUL | 0 | | | value | datetime | NO | | 0000-00-00 00:00:00 | | +----------------+----------------------+------+-----+---------------------+----------------+ 5 rows in set (0.01 sec) Thanks.

    Read the article

  • What's the case when using software licensed under GPL or LGPL

    - by Johnas
    With everything legal and in line with the ethical questions in software development, is it allowed to use an open source product in my software that I charge a fee for when selling? Scenario: I've developed an PHP Content Management System (CMS) and use some Linux executables licensed under GPL or LGPL in my CMS to accomplish various tasks like image editing. I'm selling the CMS and also including the executables when I deliver the product. I do not edit the source code of the GPL software, just using it.

    Read the article

  • LinqToSQL: Not possible to update PrimaryKey?

    - by Zuhaib
    I have a simple table (lets call it Table1) that has a NVARCHAR field as the PK. Table1 has no association with any other tables. When I update Table1's PK column using LinqToSQL it fails. If I update other column it succeeds. I could delete this row and insert new one in Table1, but I don't want to. There is a transaction table which has Table1's PK column as a column. When the PK of Table1 is changed I want no effect in the transaction table. But when the row from Table1 is deleted, I want the transaction rows to be deleted. The cascading is done via Trigger. As there is not association between these two tables, if I update the PK column of Table1 using normal SQL, it works and there is no effect on the transaction table as expected. When I delete the row the trigger deletes the rows from transaction table. For this reason I can't delete and then add new row in Table1. So what can be done to successfully update the PrimaryKey of the Table1?

    Read the article

  • What are the differences between enterprise software/architecture patterns and open source software?

    - by Jeffrey
    I am mainly a business app developer and I hear terms like CQRS, ServiceBus, SOA, DDD, BDD, AOP a lot. My question is that do these patterns/practices exist only in the "enterprise" world? In contract to the enterprise world is the open source community. Highly trafficked sites like Digg, LiveJournal whenever there is an article mentioning about how they built/scaled their sites all I am hearing is what open source software (Memcached, NoSQL) they used in order to scale/simplify the way they tackle software problems and they rarely mention those above terms. Is it because they are not as sophisticated as those of enterprise level software (I doubt it)? Or are people just making up those terms/practices/patterns in order to keep them jobs? Or am I confusing myself with differences between software development and internet website scaling?

    Read the article

  • Pros and Cons of Proprietary Software

    - by Jon Purdy
    Proprietary software is about as good as open-source software. There are so many problems with proprietary technologies, however, that I'm beginning to think it's best to avoid them: The software will only be maintained as long as the company exists (and profits). The level of security of the application is as unknowable as the source code. Alterations and derivative works, however necessary and beneficial, are disallowed. I simply don't see any point in even learning to use such systems as those created by Microsoft and Apple. Of course I don't pretend that ignorance is the superior option: one has to have a certain working knowledge simply because of the ubiquity of these things. I just don't see any reason why, as an independent developer, I should ever consider it a remotely good idea to actually use them. So that's the question, or discussion topic, or what have you: In what ways do developers benefit at all from using closed-source development software?

    Read the article

  • CakePHP update multiple elements in one div

    - by sw3n
    The idea is that I've 3 ajax links and each link is coupled to one single element (a form). The element will be loaded in one div. Each time when you click on a different link, the element that is requested before must be removed and the new one must come in there. So it has to update the DIV. The problem is, that it request the element, but it does not remove the other one. So when you click one the first link, it shows the first element, click on the second link and it puts the second element beneath them, and with the third one will happen exactly the same. If you clicked all the 3 links, it shows 3 forms right under each other. Some Code: Controller: function view($id) { // content could come from a database, xml, etc. $content = array ( array($this->render(null, 'ajax', '/elements/ga')), array($this->render(null, 'ajax', '/elements/ex')), array($this->render(null, 'ajax', '/elements/both')) ); $this->set('google', $content[$id][0]); // use ajax layout $this->render('/pages/form', 'ajax'); } View code: echo $ajax-link( 'Google', array( 'controller' = 'analytics', 'action' = 'view', 0 ), array( 'update' = 'dynamic1')); echo ' | '; echo $ajax-link( 'Exact', array( 'controller' = 'analytics', 'action' = 'view', 1 ), array( 'update' = 'dynamic1', 'loading' = 'Effect.BlindDownUp(\'dynamic1\')')); echo ' | '; echo $ajax-link( 'Beide', array( 'controller' = 'analytics', 'action' = 'view', 2 ), array( 'update' = 'dynamic1', 'loading' = 'Effect.BlindDown(\'dynamic1\')' )); echo $ajax-div('dynamic1'); echo $google; echo $ajax-divEnd('dynamic1');

    Read the article

  • MySQL Update query with left join and group by

    - by Rob
    I am trying to create an update query and making little progress in getting the right syntax. The following query is working: SELECT t.Index1, t.Index2, COUNT( m.EventType ) FROM Table t LEFT JOIN MEvents m ON (m.Index1 = t.Index1 AND m.Index2 = t.Index2 AND (m.EventType = 'A' OR m.EventType = 'B') ) WHERE (t.SpecialEventCount IS NULL) GROUP BY t.Index1, t.Index2 It creates a list of triplets Index1,Index2,EventCounts. It only does this for case where t.SpecialEventCount is NULL. The update query I am trying to write should set this SpecialEventCount to that count, i.e. COUNT(m.EventType) in the query above. This number could be 0 or any positive number (hence the left join). Index1 and Index2 together are unique in Table t and they are used to identify events in MEvent. How do I have to modify the select query to become an update query? I.e. something like UPDATE Table SET SpecialEventCount=COUNT(m.EventType)..... but I am confused what to put where and have failed with numerous different guesses.

    Read the article

< Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >