Search Results

Search found 11512 results on 461 pages for 'usb mass storage'.

Page 320/461 | < Previous Page | 316 317 318 319 320 321 322 323 324 325 326 327  | Next Page >

• Can't avoid starting macbook in safe mode

  - by Aaron Brown

  I recently spilled some water on my MacBook (mid-2010) keyboard and it shorted out several of the keys. Notably, control and left option don't work, and the system thinks that the left shift is permanently held down. I plugged in an external USB keyboard and all keys work fine; there's only one problem: The computer always starts in safe mode because the shift key is held down. I've tried holding down other keys (escape, space, c to name a few) and the control key doesn't work so I can't try that. I also tried KeyRemap4Macbook but it doesn't work in safe mode and it doesn't seem to help on startup for me. I can log in to Windows with no problems (with rEFIt) and I can browse the internet with no problems, but I can't program on the Mac OS side in safe mode (it's really slow). Which is mainly what I use this Macbook for. Any ideas out there on how to avoid starting in safe mode?

  Read the article

• zfs rename/move root filesystem into child

  - by Anton

  Similar question exists but the solution (using mv) is awful because in this case it works as "copy, then remove" rather than pure "move". So, I created a pool: zpool create tank /dev/loop0 and rsynced my data from another storage in there directly so that my data is now in /tank. zfs list NAME USED AVAIL REFER MOUNTPOINT tank 591G 2.10T 591G /tank Now I've realized that I need my data to be in a child filesystem, not in /tank filesystem directly. So how do I move or rename the existing root filesystem so that it becomes a child within the pool? Simple rename won't work: zfs rename tank tank/mydata cannot rename to 'tank/mydata': datasets must be within same pool (Btw, why does it complain the datasets are not within same pool when if fact I only have one pool?) I know there are solutions that involve copying all the data (mv, or sending the whole dataset to another device and back), but shouldn't there be a simple elegant way? Just noting that I do not care of snapshots at this stage (there are none yet to care of).

  Read the article

• Can I be a wireless server WITHOUT offering internet?

  - by Kenny Hendrick

  I would like to pull into a truck stop and offer a folder of free documentaries to quell some of the ignorance LOL I run Linux ";-) Very happy to have made that switch by the way...and have an internal wireless in the laptop but my bus has an antenna on the roof which I connect via usb to create a wireless signal (this is the one I'd like to focus on since it will offer the most reach to all those truckers out there. My question is this. I'm running apache2 and have a bunch of videos tossed into the www folder and can access it locally and would like others that frown on paying to use the truckstops slow internet service and would like an alternative by simply logging onto me and getting the narrow content I offer freely without passwords and the like. Has anyone a good means of doing this? p.s. I've done this in the past but am getting old and forgetful (my crutch)

  Read the article

• Can i enlarge os c drive of my windows 8?

  - by Sorgatz

  Last year I got a new Western Digital WD Blue 500GB HDD to replace my old drive. The first thing I did was to install latest Windows 8. While installing Windows 8 I created 3 partitions, C drive for the OS and others for storage. The OS partition is 120GB (which at the time I thought would be plenty big) but I'm now realizing its too small! I wonder if it's possible to re-size HDD partition without reformatting and re-install my Windows 8. So that is my question, Can i enlarge os c drive of my windows 8 without having to re-format? I've used the Norton Partition Magic and Disk Management to make this happen but there doesn't seem to be any options to make it happen. Thanks for any help you guys can give regarding my question. I've worked hard to optimize my current install of Windows 8 and would hate to start all over again.

  Read the article

• How can I install CentOS without a keyboard, mouse, or monitor?

  - by user1032531

  I will be buying a new computer which will be used as a CentOS server. I will put it on my home LAN, and once it is set up, will access it only through SSH. I don't want to spend a lot of money (maybe $500), and I don't want to buy another monitor or keyboard just to through them away after the server is setup. My question is how do I access the computer without a keyboard and monitor when I install the operating system? For media, I can use either the DVD or an ISO on the USB, so am good there. But how do I see what I am doing and enter commands without a monitor or keyboard? I have a Window 7 laptop, an XP laptop, and a CentOS laptop. Can I use one of my laptops to act as the MMI (Man Machine Interface)? If not, what is the easiest and least expensive option? Thank you

  Read the article

• Exchanged HDD in MacBook Pro - OSX installation disk shows prohibitory sign

  - by Hedge

  I exchanged the HDD in my 2007 MacBook Pro and removed the dvd-drive because it was making terrible noise everytime I booted the MacBook. The new HDD is a Corsair Force F120 SATA SSD. Everytime I try to launch an OSX Lion installation disk or USB stick I get the grey prohibitory sign and the machine shuts down after a while. Since I didn't format the SSD beforehand there is still Windows 7 on it. It shows the white progress bar with the message "Windows is loading files" but never finishes it. I don't want Windows on that machine, just thought this fact may be important. Any ideas what is wrong?

  Read the article

• Virtualbox 4 hangs when trying to install ubuntu guest on ubuntu host system

  - by misterjinx

  I'm trying to install ubuntu server using virtualbox 4.0.4 in a ubuntu 10.10 host OS. I have the iso image on my hard drive which I used to perform the install. I edited the settings and added this image at the storage section, selected it as a primary master, so I could boot from it and start the install process. But now, each time I start the installation, at the very beginning or if I'm lucky, after I click on the install link at the welcome screen, the process hangs and all the computer is blocked. This happened 3 times already. I even tried to perform the installation using an old CD I had with the 9.10 server version, thinking that the iso image might be the issue, but the problem still persists. I dont know what could cause this problem. My computer is a dell laptop with AMD processor (I dont know if this is important). Any help is very appreciated.

  Read the article

• would unexpected power cuts harm the Linux OS?

  - by Johan Elmander

  I am developing an application on a Linux embedded board (runs Debian) e.g. Raspberry Pi, Beagle Board/Bone, or olimex. The boards works on an environment that the electricity is cut unexpectedly (it is far complicated to place PSU, etc.) and it would happen every day couple times. I wonder if the unexpected power cuts would cause crash/problem on the Linux Operation System? If it is something that I should worry, what would you suggest to prevent the damages on OS against the unexpected power cuts? PS. The application needs to writes some data to the storage medium (SD card), I think it would not be suitable to mount it as read-only.

  Read the article

• How to Recover HDD Formatted by "Create a Recovery Drive" Tool of Windows 8.1?

  - by ide

  I have 2 TB USB HDD which had these drives F: about 1 TB with 750 GB data H: about 120 GB with 60 GB data I: about 780 GB with 250 GB data (For TV: It was raw in Windows but visible in the Smart TV) I took 521 MB from last part of H to get new G drive. Then I run "Create a Recovery Drive" tool of Windows 8.1 and chose G drive. It said all data in the drive will be deleted. I thought it is just G drive but it deleted my whole HDD. It created 32 GB new F drive with writing 337 MB on it and rest of HDD is unallocated. I tried these programs to get my first 3 drives but non of them helped for getting 1st partition. TestDisk MiniTool Partition Wizard Home Edition EaseUS Partition Master 9.2.2 (I deleted new F drive volume because it scans only unallocated part) Recuva PC Inspector File Recovery

  Read the article

• Links to detailed instructions on building a DIY NAS

  - by Kaushik Gopal

  I'm looking for good links with detailed instructions on how to build a DIY NAS (Network Access Storage). I'm planning on doing it cheap (old PC config + open source software). I did a fair bit of searching and found these links (so please suggest others). Ubuntu Setting up a Home NAS DIY NAS Smackdown How to Configure an $80 File Server in 45 Minutes FreeNAS Build a NAS Device With an Old PC and Free Software Build Your Own NAS Device While these links are great they delve more on the hardware side. I'm looking for more instructions in the software side.

  Read the article

• Wired network on computer to wifi

  - by user329592

  I just got myself a wifi capable cell phone, but I dont have a wireless internet at home. I do have a wired unlimited internet connection on my computer, and I wonder whether there is any gadget that I can plug into my computer (maybe at the usb port?) with which I can turn my computer into a wifi access point? I mean, a dongle or something which will enable me to connect my phone to my computer's internet through wi-fi? Also, I dont know anything about networking, so would it be hard for me to set up a secure wifi point? Thank you for reading this question through. Hope I can buy some sort of adapter which is comparitively cheap.

  Read the article

• How to use multiple SkyDrive accounts on one computer?

  - by user1563721

  Is there any way how to use multiple SkyDrive accounts on one computer running MAC OS X or Windows 8? I would like to sync data from different accounts to different folder and not to merge these accounts to one. The reason is that every SkyDrive has it's storage limits and I'm using every account for different work data. The result should be the following: I have a number of SkyDrive accounts every for different work, let's say: S1 S2 S3 I would like to sync exactly the same number of folders on computer using different accounts to sync them: SkyDriveS1Folder - (folder on computer which syncing the content of S1 SkyDrive) SkyDriveS2Folder - (folder on computer which syncing the content of S2 SkyDrive) SkyDriveS3Folder - (folder on computer which syncing the content of S3 SkyDrive) Is it possible somehow? I found a workaround for Windows machines (http://superuser.com/questions/525932/running-multiple-instances-of-microsoft-skydrive) but is there anything for MAC OS X machines? Or is it possible through any third party application?

  Read the article

• How do I protect business critical data against fire?

  - by Bill Knowles

  We have 72 hard drives that contain our webcast inventory. The number is increasing. We're located in a frame building and we are afraid of not only fire, but catastrophic fire. I've priced fireproof safes that hold to the required 125F for hard drives. Their price is through the roof. Seems to me if we made backups of each of the hard drives and stored them off-site somewhere, or contracted with an online backup storage company, we might run up a bill buying backup drives that would approach the $7,000 cost of the safe! What's the best way to protect our data from the risk of fire?

  Read the article

• Restore data from overwritten LVM

  - by Matthias Bayer

  I lost all of my data (8 TB) which I collected over the past few years yesterday because I made some seriuos mistakes during the remounting of my LVM. I run a XenServer5.6 installation with additional 4 harddisks for data storage. An LVM over those 4 HDDs was used to store all of my data. Yesterday, I reinstalled XenServer and wanted to mount my old Harddrives and add the LVM. I run xe sr-create [...] for all disks (/dev/sdb .. /dev/sde), but that was totally wrong. This command deletes the old LVM on the disks and created an new, empty lvm on every single disk with no partitions. No i got 4 empty harddrives :( Is it possible to recover some data from that lost LVM volumes? I have no clue how to do it because i deleted all informations about the old LVM. Is there a way to access the files insed that old lvm directly?

  Read the article

• Can you recover from a backup with bad blocks?

  - by Macbook-Recovery

  The hard drive in my Macbook recently gave up while using it on the plane (dual prop, lots of vibration unfortunately). I have a backup of its contents from a few weeks ago, but there are files that aren't included in it that I would like to recover. As it stands right now, I have it plugged to my macbook by USB. Snow leopard recognizes it, but can't mount it. Therefore, tools like Diskwarrior and Techtools do not work. I started doing a clone of it with Data Rescue 3, but after 7 hours of activity (20% through the drive), it has copied 130 GB of the drive but reports all of the data as "bad blocks". My question is this: Is any data recoverable if the clone is completely composed of bad blocks?

  Read the article

• Network MP600 printer asking me to install new driver on laptop.

  - by user15003

  I have windows 7 home 32-bit on my desktop which is connected to my mp600 via USB. I have Vista 64-bit on my laptop. The MP600 is set for sharing and appears under printers in network under my pc's name. When I click on connect it says "The server for canon inkjet mp600 printer does not have the correct printer drivers installed........." I don't know what to do and it is really frustrating. It all worked fine before when I had XP 32 bit on my desktop

  Read the article

• Private cloud solution [Eucalyptus,OpenStack, Nimbus] for Java deployments [Glassfish, Tomcat]

  - by Tadas D.

  I am interested in a way to have private cloud which would host Glassfish (or Tomcat) server. Which option from Eucalyptus, Openstack or Nimbus would be best to deploy java applications on it? Or maybe there is something other and I am looking wrong at the problem? The way I imagine this, that I should have some shared storage that I could expand by introducing new nodes to this cluster and have easy management for glassfish instances: something like virtual machines images that I can start and stop on demand and that image is shared among nodes. I don't need concrete step-by-step solution here but guidelines how this should be done are very welcome.

  Read the article

• please explain my fio results - is O_SYNC|O_DIRECT misbehaving on linux?

  - by Zoltan

  I'm going mad over figuring out what the problem could be with one of our storage boxes. With a simple fio script I'm testing random writes using bs=1M and direct=1. The SSD is a Samsung 840pro attached to an LSI HBA (3Gbit/s ports). This is the result I'm getting under FreeBSD 9.1: WRITE: io=13169MB, aggrb=224743KB/s, minb=224743KB/s, maxb=224743KB/s, mint=60002msec, maxt=60002msec This is regardless of sync being set to 0 or 1. On linux, this is the result with sync=0: WRITE: io=14828MB, aggrb=253060KB/s, minb=253060KB/s, maxb=253060KB/s, mint=60001msec, maxt=60001msec and with sync=1: WRITE: io=6360.0MB, aggrb=108542KB/s, minb=108542KB/s, maxb=108542KB/s, mint=60001msec, maxt=60001msec My understanding is that since I'm operating on the raw block device, O_SYNC should not make any difference - there's no filesystem, any barrier, anything between the writes and the drive itself. Especially with O_DIRECT|O_SYNC set. Any ideas? For reference, here's the fio script I'm testing with: [global] bs=1M ioengine=sync iodepth=4 size=16g direct=1 runtime=60 filename=/dev/sdh sync=1 [rand-write] rw=randwrite stonewall

  Read the article

• How do I built a DIY NAS?

  - by Kaushik Gopal

  I'm looking for good, detailed instructions on how to build a DIY NAS (Network Access Storage). I'm planning on doing it cheap (old PC config + open source software). I would like to know: What hardware I need to built one What kind of hard-drive setup I should take (like RAID) Or any other relevant hardware related advices (power supply, motherboard etc...) What software I should run on it, both what OS and software to manage the contents effectively So the NAS is recognizable and accessible to my network I can make sure my Windows computers will recognize it (when using Linux distro's) I can access my files from outside my network I already did a fair bit of searching and found these links, but while these links are great they delve more on the hardware side. I'm looking for more instructions in the software side. Ubuntu Setting up a Home NAS DIY NAS Smackdown How to Configure an $80 File Server in 45 Minutes FreeNAS Build a NAS Device With an Old PC and Free Software Build Your Own NAS Device

  Read the article

• How to test TempDB performance?

  - by Matt Penner

  I'm getting some conflicting advice on how to best configure our SQL storage with our current SAN. I would like to do some of my own performance testing with a few different configurations. I looked at using SQLIOSim but it doesn't seem to simulate TempDB. Can anyone recommend a way to test data, log and TempDB performance? What about using a SQL profiler trace file from our production system? How would I use This to run against my test server? Thanks, Matt

  Read the article

• How to make a pxe bootable 10MegaByte or larger dos image?

  - by rjt

  Would like to make a "massive" DOS floppy disk image, say 10MegaBytes or more containing all the firmware updates i need for any system, harddrive, BIOS. i do not need the DOS image to be networkable as everything will be on the PXE booted image, but networking would be nice. Since ZipDisks were attached to the floppy disk controller and were over 100MegaBytes, this should be possible. i tried a long time ago to do this and spent too much time on it only to have it fail to boot. So if someone has reliable instructions on how to create such a nightmarish beast and edit it, please let me know. One image that can used for PXE and copied to a USB stick would be a plus. Too bad manufacturers don't supply a single bootable Linux ISO containing all their firmware updates, that would be easy to boot over-the-lan and have networking. HP servers do this and it is awesome.

  Read the article

• Looking for FTP server that allows user management from database

  - by hughesdan

  I'm planning a server application that will handle files uploaded via FTP. The application must parse text documents that it receives and write them to a database (most likely a document-oriented database like Mongo). And the application must also relay all large binary files it receives to Amazon S3 for storage and hosting. I'd like to manage all aspects of the FTP server programmatically. For example, when a user registers via a web page the application should be able to create the user account in the database and provision a directory on the server for receiving files. I'm using a Linux server but am otherwise open to considering any programming language or framework. I experimented with VSFTPD but didn't like the way the application relies on config files and the creation of users and directories via the command line. Can someone please recommend what server framework I should consider? I'm a little biased toward solutions that leverage Javascript/Nodejs or Python. However, I'm open to anything that can run on a Linux box.

  Read the article

• Cannot format SD memory card

  - by cool

  Hello everyone I have a SD memory card which is of local manufacturer it allows to read & copy from it but not write as it is now write-protected so i want to format that card but could not. To format this card I have tried 1) DD command 2) mkfs -f vfat command 3) creating registry entry under storage device policy in window with write value 0 4) disk part command in window to clear attributes in which it show all attributes are clear ie no write protection 5) I format card in windows through control panel - administrative tools- computer management - disk management, then it show as formatted but when I tried to create new partition it give CYCLIC REDUNDANCY CHECK error 6) I downloaded a format utility from transcend site and formatted first it shows write protected again doing format it formats and tells to remove and reinsert after reinsertion it shows the previous data as it is

  Read the article

• Solaris Administration Web GUI?

  - by Robert C

  I recently installed Solaris 11 x86 text install (http://www.oracle.com/technetwork/server-storage/solaris11/downloads/index.html?ssSourceSiteId=ocomen) to be used as a file server running ZFS. I noticed that I'm given the bare minimum in terms of packages. Is there an official oracle web GUI for managing ZFS? I ran a netstat and it doesn't appear to have installed any webserver thats listening. I saw something from a couple years ago, but apparently it's not packaged or maintained anymore (https://blogs.oracle.com/talley/entry/manage_zfs_from_your_browser). I tried pkg install network-console, but it says that the package isn't available for my platform. Any ideas? I'd like to stick with Oracle Solaris instead of the open source alternatives, if possible.

  Read the article

• Ubuntu not showing disk

  - by ojek

  I have a laptop which had broken windows 7 installed on it. I created a ubuntu live usb and tried installing ubuntu over that win7. After a few minutes, I got an error message, so I needed to restart the computer. Now the laptop says that there is no bootable device - reasonable message given that there was an error during linux installation. But: Bios can see my hard drive, When I start ubuntu in live mode, and try either sudo fdisk -l or gparted, it doesn't show any hard disk drives. I am 90% sure that hdd is broken, but it is wierd that bios can see it, and ubuntu doesn't. How can I be 100% sure about that hdd? Is there any additional way of detecting my hdd from ubuntu?

  Read the article

< Previous Page | 316 317 318 319 320 321 322 323 324 325 326 327  | Next Page >