Search Results

Search found 14993 results on 600 pages for 'anonymous the great'.

Page 321/600 | < Previous Page | 317 318 319 320 321 322 323 324 325 326 327 328  | Next Page >

• So my employer wants me to do less programming and focus on IT support

  - by Rich

  I was hired into a non tech company's IT department as a programmer a few years back, and after several rounds of lay offs, we're down to a skeleton crew. I've saved the company hundreds of thousands of dollars with my projects and management has been happy with them (although most of the stakeholders have since left the company). Management now wants me to limit the programming that I do and spend most of my time on IT support: putting out fires, dealing with vendors, outsourced contractors, supporting company systems, managing projects, etc. I am a little burnt out on programming since I've been pushed pretty hard for the past several years. However, I'm not sure if this is a good career move in the long run. I'm a decent programmer (and also good with databases) but not obsessed with it to the point of coding outside of work. I'm approaching my mid 30s and there's potential ageism to deal with down the line. While I'm fortunate to have survived the lay offs, it sorta feels like my job is being "dumbed down". I have both good technical skills and people skills...but it doesn't take a genius to do what I'm doing now. And my success is being increasingly linked to others' performance rather than my own... Just looking for some advice. Is it time to move on? That's not really an easy thing to do since I'd likely have to move to another area to find another comparable tech job. Should I go after another pure technical role? Or should I stay and try to make this work? People say do what you "enjoy" but it doesn't really matter to me as long as I'm getting paid. Also the ageism thing is on the horizon and could be an issue eventually. I'm making a decent (but not great) salary. Should I chase money and maximize my income while I still have a chance? Or be happy with a moderate salary and 40 hour work week?

  Read the article

• What virtualization solution should I try next, after hitting problems w/ VMWare Player in dual-netw

  - by Alex R

  I have been using VMWare Player 2.5 for a while (Ubuntu guest on Vista host, 32-bit). VMWare had worked great until now but then I hit a brick wall: Due to some reorganization of my home network, the host machine now has to use a wireless connection to reach the Internet, while the printer, fileserver, and other important stuff are attached to a local gigabit hub. I have tried several tricks, such as editing the .vmx file, changing settings in vmnetcfg, etc, but I'm still unable to get the virtual Ubuntu box to connect each of the two virtual NICs to different networks (I did get it to recognize two NICs, but both DHCP'd onto the gigabit LAN). So, I'm ready to dump vmware for something with a little more low-level control of network settings. Virtualization is such a crowded space, I could spend months evaluating every product out there. I'm hoping for a shortcut... Can anyone recommend the best VM for my situation described above? Thanks

  Read the article

• How to disable color dithering for low-bit-depth screen settings?

  - by gogowitsch

  I am using Terminal Services and TeamViewer a lot to access other computers, partly over slow networks. The problem described below is not affected by which of the two remote access services I am using. When accessing Windows 7 Professional machines, a great deal of text is hard to read as the background is dithered. Even for exactly the same colors, Windows 2003 does not seem to dither at all, but to choose the closest available color. I strongly prefer the latter, as I don't care for the exact colors, I just want to be able to read easily. I am not sure whether this is operating system-related. The programs on the remote systems do not allow me to change the color choices for the various backgrounds to anything sane. Is there a way to disable this color dithering using some target operating system setting that will do the trick for both Terminal Services and TeamViewer?

  Read the article

• What are some IT jobs where you don't sit at a desk for 8-10hrs a day?

  - by zippy

  Like a lot of people in IT I sit at a desk for 8-10hrs/day working on stuff that needs to get done "now". That usually means eating unhealthy lunches at my desk, and sometimes dinner too. This does terrible things to your health. I have been trying to work some exercise into the workday but I was thinking it would be great if I worked somewhere where I was exercising all the time (walking around, lifting servers, etc.). Does anyone have a job in IT (or know someone) where you are actually moving around (not sitting) doing something for most of the day?

  Read the article

• Messaging with KnockoutJs

  - by Aligned

  MVVM Light has Messaging that helps keep View Models decoupled, isolated, and keep the separation of concerns, while allowing them to communicate with each other. This is a very helpful feature. One View Model can send off a message and if anyone is listening for it, they will react, otherwise nothing will happen. I now want to do the same with KnockoutJs View Models. Here are some links on how to do this: http://stackoverflow.com/questions/9892124/whats-the-best-way-of-linking-synchronising-view-models-in-knockout http://www.knockmeout.net/2012/05/using-ko-native-pubsub.html ~ this is a great article describing the ko.subscribable type. http://jsfiddle.net/rniemeyer/z7KgM/ ~ shows how to do the subscription https://github.com/rniemeyer/knockout-postbox will be used to help with the PubSub (described in the blog post above) through the Nuget package. http://jsfiddle.net/rniemeyer/mg3hj/ of knockout-postbox   Implementation: Use syncWith for two-way synchronization. MainVM: self.selectedElement= ko.observable().syncWith (“selectedElement”); ElementListComponentVM example: self.selectedElement= ko.observable().syncWith(“selectedElement”); ko.selectedElement.subscribe(function(){ // do something with the seletion change }); ElementVMTwo: self.selectedElement= ko.observable().syncWith (“selectedElement”); // subscribe example ko.postbox.subscribe(“changeMessage”, function(newValue){ }); // or use subscribeTo this.visible = ko.observable().subscribeTo("section", function(newValue) { // do something here }); · Use ko.toJS to avoid both sides having the same reference (see the blog post). · unsubscribeFrom should be called when the dialog is hidden or closed · Use publishOn to automatically send out messages when an observable changes o ko.observable().publishOn(“section”);

  Read the article

• End of Public Updates for Java SE 6

  - by Tori Wieldt

  It's important for developers and systems administrators to either make the transition over to Java SE 7 or to work with Oracle to get updates via the Java SE Support program. Have you updated to Java SE 7? Along with great features (Fork/Join, NIO, Project Coin), Java SE 7 is being updated and patched regularly. Java SE 7 has been out for over a year and is ready to download.  The last publicly available release of Oracle JDK 6 is to be released in February, 2013. This means that after 19 February 2013, all new security updates, patches and fixes for Java SE 6 and Java SE 5 will only be available through My Oracle Support and will thus require a commercial license with Oracle.    In the event you are not ready to migrate to Java SE 7, Oracle offers: Java SE Support for continued access to critical bug fixes and security fixes as well as general maintenance for JDK 6. Additionally, Java SE Advanced and Suite offers superior diagnostics and manageability tools that minimize the costs of deployment, monitoring and maintenance of Java-based IT environments. The Java SE Support Roadmap reflects an updated timeline for the End of Public Updates for JDK 6. The End of Public Updates date has been extended from November 2012 to February 2013, to allow some more time for the transition to JDK 7. Older releases of Java SE 6 will still be available on the Java SE archive, but will require a commercial license with Oracle for any new security updates, patches and fixes.  Th End of Public Updates for Java SE 6 will not impact the usage, availability, patching of Java SE 6 used for Fusion Middleware 11g and 12c. The support schedule for Java SE used for and in Fusion Middleware is not impacted by this announcement. For More Information Visit the Java SE page on Oracle.com.

  Read the article

• Sweden Windows Azure Group Meeting in November &amp; Fast with Windows Azure Competition

  - by Alan Smith

  SWAG November Meeting There will be a Sweden Windows Azure Group (SWAG) meeting in Stockholm on Monday 19th November. Chris Klug will be presenting a session on Windows Azure Mobile Services, and I will be presenting a session on Web Site Authentication with Social Identity Providers. Active Solution have been kid enough to host the event, and will be providing food and refreshments. The registration link is here: http://swag14.eventbrite.com If you would like to join SWAG the link is here: http://swagmembership.eventbrite.com Fast with Windows Azure Competition I’ve entered a 3 minute video of rendering a 3D animation using 256 Windows Azure worker roles in the “Fast with Windows Azure” competition. It’s the last week of voting this week, it would be great if you can check out the video and vote for it if you like it. I have not driven a car for about 15 years, so if I win you can expect a hilarious summery of the track day in Vegas. My preparation for the day would be to play Project Gotham Racing for a weekend, and watch a lot of Top Gear.   My video is “Rapid Massive On-Demand Scalability Makes Me Fast!”. The link is here: http://www.meetwindowsazure.com/fast/

  Read the article

• What is the easiest way to make your browser refresh a page every say, 5 seconds?

  - by Oren A

  Is there a browser that supports refreshing a page every say, 5 seconds? Is there an add-on? If not, is there a more simple way than writing a full (C# or Java) program in order to do that? Added: Opera is horrible! I set Stack Overflow to refresh every 5 seconds, but when I click on a post, it refreshes it every 5 secs too! I just wanted the main page to refresh every 5 seconds. Another "Added": apparently it refreshes the current tab, so as long as I open the post in a new tab, it works great.

  Read the article

• Consultations with ATG Development at OpenWorld 2014

  - by Steven Chan (Oracle Development)

  Our OpenWorld 2014 San Francisco conference is about six weeks away.  We have a great lineup of sessions this year.  Our EBS Applications Technology track sessions are listed here, and we'll have a more-detailed article about those soon. One of the advantages of attending OpenWorld is that you can meet face-to-face with senior staff in ATG Development.  You can use these meetings to discusss your questions, requirements, plans, and deployment architectures with us. There are several options for doing this: At general sessions: collar the speaker of your choice after his or her presentation. At the Meet The Experts sessions:  these are first-come first-served round-table discussions Setting up private meetings via your Oracle account manager The last option is best if you have lots of in-depth questions or confidential details about your implementation that cannot be discussed in front of other customers.  Many of this blog's experts, including me, will be attending OpenWorld this year.  If you'd like to meet with us privately, please contact your Oracle account manager to arrange that as soon as possible.  My calendar, in particular, is already starting to fill up.  It is often completely full by the time OpenWorld starts. See you there!

  Read the article

• Can certain system-hungry modules be disabled in Ubuntu?

  - by Ole Thomsen Buus

  Hi, Let me add some context: I am currently using Ubuntu 9.10 64-bit (Desktop) on a relatively powerful stationary PC (Intel Core i7 920, 12GB ram). My purpose is highspeed imaging with a pointgrey Grashopper machine-vision camera (for research, PhD project). This camera is capable of 200 fps at full VGA (640x480) resolution. The camera is connected using Firewire (1394b) and the drivers and software from Pointgrey works great. I have developed a console C++ application that can grap a certain number of frames to preallocated memory and after this also save the grapped frames to harddrive. Currently it works fine but sometimes I am observing a few framedrops (1-3). When this happens I reset the experiment and repeat the recording and usually i am lucky the second time with no framedrops (the camera-driver has a internal framecounter that I am using). Question: I usually go to tty1 and use "sudo service gdm stop" to disable the graphical frontend. It seems to release some memory though that is not my main concern. My concern is CPU resources. Are there other system hungry modules that can be disabled temporarily such that the CPU gets less busy on Ubuntu 9.10? At some point in the future I will update to 10.10. Should I perhaps option for the server edition instead? Thanks.

  Read the article

• Recoomend company to take care or webserver and wordpress management?

  - by javipas

  I'm interested in setting up a professional WordPress site but I'd like to explore the pssibilities to leave the management of the webserver and even WordPress' management to a company that guarantees great availability, performance of the site (load times, security) and even SEO. My site is currently running on other platform but I plan on a migration on the next 4 weeks. I've done this usually, but I'd like to focus on the content, so I don't have to mess with webserver/mysql/php configs in order to get nice performance. Is there some (maybe hosting) company that is dedicated to this? Would it be better to hire a sysadmin with experience in those matters?

  Read the article

• Windows Azure v1.7 Spring Release Today&ndash;New Management Dashboard

  - by ToStringTheory

  Today, Microsoft will be publicly releasing a new version of Azure for public consumption.  The web conference, at http://www.meetwindowsazure.com will be airing at 1 PM PST.  They have already released an update to the Service Dashboard that can be accessed by going to http://manage.windowsazure.com.  I have some images of the new dashboard here that I have gathered and removed any PII from.  Let me know what you think! Images You should be able to click any of the images for a full resolution image. Tutorial The first thing you get after signing in is the tutorial: Landing After the tutorial completes, you get a screen with services that are active on your account on the left, and a list of ALL services (db/blob/SQL Azure) on the right.  I like the quick access to services across any of my subscriptions: Service Information These are images from a running web site with several roles.  I love how easy they have made many of the features: SQL Azure They have given some great quick functionality for looking at your DB information: Storage Here is the basic information that they give you for any storage accounts you have: Adding Services Super quick and easy to add services with the new UI: Conclusion I am EXCITED!  As you may have seen in the left side of my blog, I am an MCPD in Azure Development, and I must say that I am excited to see Microsoft moving forward with the technology and not letting it stagnate.  After as much as I have fought the other Azure dashboard, I like the friendliness and fluidity of this one. The important thing to note about ALL of the images above: this is HTML, not Silverlight.  The responsiveness is FAST on all of the actions I completed, and I believe that this is a big step forward for Azure… So, what do you think?

  Read the article

• Reformatting and version control

  - by l0b0

  Code formatting matters. Even indentation matters. And consistency is more important than minor improvements. But projects usually don't have a clear, complete, verifiable and enforced style guide from day 1, and major improvements may arrive any day. Maybe you find that SELECT id, name, address FROM persons JOIN addresses ON persons.id = addresses.person_id; could be better written as / is better written than SELECT persons.id, persons.name, addresses.address FROM persons JOIN addresses ON persons.id = addresses.person_id; while working on adding more columns to the query. Maybe this is the most complex of all four queries in your code, or a trivial query among thousands. No matter how difficult the transition, you decide it's worth it. But how do you track code changes across major formatting changes? You could just give up and say "this is the point where we start again", or you could reformat all queries in the entire repository history. If you're using a distributed version control system like Git you can revert to the first commit ever, and reformat your way from there to the current state. But it's a lot of work, and everyone else would have to pause work (or be prepared for the mother of all merges) while it's going on. Is there a better way to change history which gives the best of all results: Same style in all commits Minimal merge work ? To clarify, this is not about best practices when starting the project, but rather what should be done when a large refactoring has been deemed a Good Thing™ but you still want a traceable history? Never rewriting history is great if it's the only way to ensure that your versions always work the same, but what about the developer benefits of a clean rewrite? Especially if you have ways (tests, syntax definitions or an identical binary after compilation) to ensure that the rewritten version works exactly the same way as the original?

  Read the article

• Is it worth moving from Microsoft tech to Linux, NodeJS & other open source frameworks to save money for a start-up?

  - by dormisher

  I am currently getting involved in a startup, I am the only developer involved at the moment, and the other guys are leaving all the tech decisions up to me at the moment. For my day job I work at a software house that uses Microsoft tech on a day to day basis, we utilise .NET, SqlServer, Windows Server etc. However, I realise that as a startup we need to keep costs down, and after having a brief look at the cost of hosting for Windows I was shocked to see some of the prices for a dedicated server. The cheapest I found was £100 a month. Also if the business needs to scale in the future and we end up needing multiple servers, we could end up shelling out £10's of £000's a year in SQL Server / Windows Server licenses etc. I then had a quick look at the price of Linux hosting for a dedicated server and saw the price was waaaaaay lower than windows hosting. One place was offering a machine with 2 cores for less than £20 a month. This got me thinking maybe the way to go is open source on Linux. As I write a lot of Javascript at work (I'm working on a single page backbone app at the moment), I thought maybe NodeJS and a web framework like Express would be cool to use. I then thought that instead of using SQL why not use an open source NoSQL database like MongoDB, which has great support on NodeJS? My only concern is that some of the work the application is going to do is going to be dynamically building images and various other image related stuff, i.e. stuff that is quite CPU heavy - so I'm thinking of maybe writing anything CPU heavy in C++ and consuming it as a module in Node. That's the background - but basically is Linux a good match for: Hosting a NodeJS/Express site? Compiling C++ node modules? Using a NoSQL DB like MongoDB? And is it a good idea to move to these unfamiliar technologies to save money?

  Read the article

• How to create a hotkey to open diigo in Chrome browser?

  - by Nam Gi VU

  I'm using diigo extension in Chrome browser and feel quite tired of clicking the diigo icon every time I want to bookmark. I'm looking for a way to have a hotkey for it but can't find it in the option of diigo. I tried solution suggested by makeuseof website but the diigo booklet doesn't work as great as the extension - it requires to sign in again and again... !? If you have any work-around to get the hotkey for diigo, please share! Thank you!

  Read the article

• AuthInfoRequired cups overwrites

  - by mooscape

  My problem is basically identical to the following: http://bbs.archlinux.org/viewtopic.php?id=61826 Put simply, I have a machine in ubuntu trying to connect to another ubuntu machine via a network in order to use the printer attached. There is no problem printing until I restart the guest machine. Immediately it overwrites the printers.conf file (under /etc/cups/printers.conf). It always adds the same line: AuthInfoRequired username,password I stop cups and change it to *#*AuthInfoRequired username,password to comment out the command. Start cups. Works great 'til the next shutdown. Then it gets overwritten again. Googling indicates it may be GTK problem and not CUPS, but I have found no permanent solution to date. Any suggestions appreciated ....

  Read the article

• How to highlight non-rectengular hotspots?

  - by HuseyinUslu

  So my question is highly related to Creating non-rectangular hotspots and detecting clicks. Yet again, I've irregular hot-spots (think the game Risk). So basically, we can detect clicks on these hot-spots easily using color key mapping as discussed in above question which I don't have any problems implementing (which is also covered here in details). The problem is about highlighting these irreguar hotspots. So let me explain the question a bit more - the above color key mapping guide uses this as a world map; then the author color-maps the imaginary countries; which we can now detect the country the pointer is over. In the same article author mentions outlining countries on mouse-over; though to get the effect, he creates unique border assets for each country - like; So for the game I'm working on I'm using the same color-key mapping idea to detect hot-spots, but I didn't like the way of highlighting hot-spots. Coloring all the hot-spots is already a great work for me - as I've 25+ hot-spots for each map - further more the need to have 25 unique border/highlight asset per hot-spot doesn't sound right. Anyone have a better idea/suggestion on highlighting these hot-spots?

  Read the article

• Contractor - Mispaid again - Walked out

  - by MeshMan

  Hi all, I'm wondering whether or not I've done the right thing as a contractor. Basically I'm in to my 3rd month, and my current client messed up the payment in the first month, and I just found out that they are again late in paying me for my 2nd month. It wouldn't be so bad if I wasn't in a bit of a financial situation due to this being my first contract experience. But as a matter of principal, I walked out on them and will be telling them that I will not be going back in until they resolve the pay. Part of me feels as though this was not a very professional thing to do, but I also don't feel that it was very professional for them to mess my payments up, twice in a row. Did I make the right decision? I still want to work for these guys and enjoy the job, but I have a life to attend to that requires finances and I can't afford to keep getting messed up with pay like this. I attempted to phrase the question to be oriented around contractors behaviour around clients that mis-treat them, and as some of the answers that have been posted so far, it's a good discussion. The answers coming in are great around different subjective situations.

  Read the article

• How To Export/Import a Website in IIS 7.x

  - by Tray Harrison

  IIS 6 had a great feature called ‘Save Configuration to a File’ which would allow you to easily export a website’s configuration, to be later used to import either on the same server or another box.  This came in handy anytime you wanted to duplicate a site in order to do some testing without impacting the existing application.  So naturally, Microsoft decided to do away with this feature in IIS 7. The process to export/import a site is still fairly simple, though not as obvious as it was in previous versions.  Here are the steps: 1. Open a command prompt and navigate to C:\Windows\System32\inetsrv and run the following command: appcmd list site /name:<sitename> /config /xml > C:\output.xml So if you were wanting to export a website named EAC, you would run the following: If you’ll be setting up another copy of the site on the same server, you’ll now need to edit the output.xml file before importing it.  This is necessary in order to avoid conflicts such as bindings, Site ID, etc.  To do this, edit the XML and change the values.  Go ahead and make a copy of the home directory, and rename it to whatever folder name you specified in the output – /EAC2 in this example.  If you decide to change the app pool, make sure you go ahead and create the new app pool as well. Once these edits have been made, we are now ready to import the site.  To do that run: appcmd add sites /in < c:\output.xml So for our example it would look like this: That’s it.  You should now see your site listed when opening up Inet Manager.  If for some reason the site fails to start, that’s probably because you forgot to create the new app pool or there is a problem with one of the other parameters you changed.  Look at the System log to identify any issues like this.

  Read the article

• Emulate Historical Figures i.e. Einstein - Is this possible using linguistic logic for my http://www.ustimeline.com Education System

  - by Johnnylight

  After hearing about the success of IBM's Watson I started thinking perhaps emulating human language is now possible? My goal is to create Virtual Historical characters to represent the main characters in my Adventur-Cation The Great American Adventure program such as Einstein or Crazy Horse. The goal is to build an intelligent system capable of indexing the internet and storing the data using a schema using modern knowledge on linguistic theory (phonemes, morphemes, syntax) to build a system capable to returning a semantically sound response very similar to the response made by the same person if still alive today. The goal would be to use the same engine/system for all characters. Each characters would have their own digital representation and voice, and would organize data differently based on tags/keywords stored about the individual. Imagine a Max Headroom Einstein. Based on the success of Watson, I believe something like this may now be possible. Would be an interesting way to study history and would be a vehicle of entertainment as well. Can anyone confirm if this has already been attempted? Is anyone interested in exploring this using Cognitive Science, Psychology, Artificial Intelligence, Historical data captured on the internet, and Linguistic theory?

  Read the article

• Javascript widgets: do links count as SEO backlinks? [closed]

  - by j0nes

  Possible Duplicate: How good is it for SEO if you have a widget that lives on other sites? On my website I offer an option to let users embed information from my site with some kind of "homepage widget". If a user wants to embed it in his website, he basically has to add one line of Javascript to his HTML files like this: <script src="http://mysite.com/myscript.php?some_options_here"></script> Inside the widget, I export some content from my website and of course create a link back to my website. This is done in Javascript with document.write. document.writeln("My great exported content"); document.writeln('<a href="http://mysite.com?ref=widget>Check mysite.com</a>'); I have Google Analytics set up to track whether the links in there get clicked, and they do. Now I am asking myself if Google recognizes these links as valid backlinks from the embedding domain. I know that Googlebot can parse and execute Javascript, but I have not found any references whether these links also count as "normal" backlinks.

  Read the article

• Bash: Quotes getting stripped when a command is passed as argument to a function

  - by Shoaibi

  I am trying to implement a dry run kind of mechanism for my script and facing the issue of quotes getting stripped off when a command is passed as an argument to a function and resulting in unexpected behavior. dry_run () { echo "$@" #printf '%q ' "$@" if [ "$DRY_RUN" ]; then return 0 fi "$@" } email_admin() { echo " Emailing admin" dry_run su - $target_username -c "cd $GIT_WORK_TREE && git log -1 -p|mail -s '$mail_subject' $admin_email" echo " Emailed" } Output is: su - webuser1 -c cd /home/webuser1/public_html && git log -1 -p|mail -s 'Git deployment on webuser1' [email protected] Expected: su - webuser1 -c "cd /home/webuser1/public_html && git log -1 -p|mail -s 'Git deployment on webuser1' [email protected]" With printf enabled instead of echo: su - webuser1 -c cd\ /home/webuser1/public_html\ \&\&\ git\ log\ -1\ -p\|mail\ -s\ \'Git\ deployment\ on\ webuser1\'\ [email protected] Result: su: invalid option -- 1 That shouldn't be the case if quotes remained where they were inserted. I have also tried using "eval", not much difference. If i remove the dry_run call in email_admin and then run script, it work great.

  Read the article

• Necessary Infrastructure for large project with many components communicating through IPCs

  - by jluzwick

  I have a fairly in depth question which probably doesn't have an exact answer. As a software engineer, I am usually tasked with working on a program or project with minimal understanding of how other components or programs in the project interact with each other. When one program fails in a sea of multiple components and processes, what infrastructure elements are necessary to ensure that the problem can be accurately tracked to the violating application? More specifically, what infrastructure elements should be necessary for this large project and which are optional but very helpful. One such example I can think of is some form of a common logging infrastructure that allows for a developer or tester to easily browse through a log that contains numerous components for messages that might allude to the culprit program along with a "trail" of what happened before the issue occurred. I'm thinking of something similar to Androids alogcat tool. These necessary infrastructure elements should be language-agnostic. While these elements should be understood by all engineers on the team in question, which elements should be understood at great detail by the technical system engineers and what should the individual software engineers be responsible for adding to their tools to allow for such infrastructures to take hold? Please feel free to ask for clarification if something does not make sense as I understand this question is very broad and needs some refinement. I will refine as necessary from the answers and comments I receive. Thanks for any help!

  Read the article

• JEditorPane on Steroids with Nashorn

  - by Geertjan

  Continuing from Embedded Nashorn in JEditorPane, here is the same JEditorPane on steroids with Nashorn, in the context of some kind of CMS backend system: Above, you see heavy reusage of NetBeans IDE editor infrastructure. Parts of it are with thanks to Steven Yi, who has done some great research in this area. Code completion, right-click popup menu, line numbering, editor toolbar, find/replace features, block selection, comment/uncomment features, etc, etc, etc, all the rich editor features from NetBeans IDE are there, within a plain old JEditorPane. And everything is externally extensible, e.g., new actions can be registered by external modules into the right-click popup menu or the editor toolbar or the sidebar, etc. For example, here's code completion (Ctrl-Space): It even has the cool new feature where if you select a closing brace and the opening brace isn't in the visible area, a rectangular popup appears at the top of the editor, to show how the current piece of code begins: The only thing I am missing is code folding! I wish that would work too, still figuring it out. What's also cool is that this is a Maven project. The sources: http://java.net/projects/nb-api-samples/sources/api-samples/show/versions/7.3/misc/CMSBackOffice2

  Read the article

• backup, sync and search files over internet and intranet

  - by Cawas

  There are many online backup options out there. Dropbox, Sugarsync, Mozy, Carbonite, Jungledisk and my favorite so far, Crashplan. Some of them allow searching, all of them sync with their online servers, none of those (or many many others I didn't listed here) have what I want. I'm _not_ looking for an online backup service in here. Sure, some people might say "use rsync", "linux" and/or "set up apache" and so on... But that's just too much for maintenance, if it's even viable of building up. It needs to be simple. So, anyone knows of a really good solution out there? Picture mostly Google Desktop Search (or quick search) awesome searching, mixed with Crashplan Desktop, which is able to do everything by itself, and something like Dropbox's file versioning, along with dropbox the ability to seamless sync over intranet and internet like crashplan, switching between them when needed. I bet there's nothing like this yet, but well, I'm not sure. It would be great!

  Read the article

< Previous Page | 317 318 319 320 321 322 323 324 325 326 327 328  | Next Page >