Search Results

Search found 11960 results on 479 pages for 'auto implemented propert'.

Page 321/479 | < Previous Page | 317 318 319 320 321 322 323 324 325 326 327 328  | Next Page >

• Synchronizing ODSEE and OUD

  - by Etienne Remillon

  When it comes to synchronizing between ODSEE and OUD, what should be the best options ? Couple  options are available - Use one of OUD internal capability called Replication Gateway - Use our synchronization tool called Directory Integration Platform part of Oracle Directory Services Plus - Manuel export and import Let's check pro and cons on each method. Replication Gateway is the natural, out of the box solution to perform the task. We created this as a feature of OUD because it works at our replication protocol level. The gateway perform the required adaptation between the ODSEE's replication protocol and OUD's one. The benefits of doing this is that it provide strong consistency between the to type of directories. This fully leverage conflict management implemented in the replication protocols to ensure that changes are applied in a coherent and ordered manner. It does not require specific modification on existing ODSEE production instances such as turning on "retro changelog". Changes are propagated at near speed of replication in both directions. Replication Gateway can also synchronize information that are stored internally in the directory server such as "xxxxx" account locking managed at ODSEE server level and not via the nsyyyy attribute. OUD replication gateway does no require any specific tools or installation specific procedure. It is manged like other OUD component with monitoring and configuration via the standard console. OUD Replication Gateway does not perform adaptation between ODSEE and OUD. Using Directory Integration Protocol as external component to OUD, brings flexibility in remapping and transformations between ODSEE and OUD. There is a price to pay in using DIP to perform the synchronization task. You will have to turn on the retro change log to get access to changes on the ODSEE side (this will impact disk and CPU usage and performances which could be a serious challenge for your existing ODSEE environment (if you have not provisioned additional hardware and instances). You will not benefits of conflict resolution management and this might have to be addressed at application level, which is not always possible to implement. Using export and import seams very simple, but this methodology cannot ensure an highly available deployment with up to date entries on booth sides. This solution can be used if full HA with up-to-date data is not needed (during synchronization time). It often used  if data-cleaning need to take place to avoid polluting a new environment with old un-necessary data.

  Read the article

• Joomla Hide Menu Item, or: Using Rich Content as part of the navigation

  - by chiccodoro

  In my Joomla based web site, I have a two layer main menu. The page layout contains two sections whereas the left one displays the content and the right one displays some other kind of content which at the same time serves as a menu. For example, if the user clicks on the "Products" - "SomeCategory" 2nd level menu item, the left section displays an image. The right section lists all products of that category. Each product is represented by an image and text. The content is scrollable. This section is implemented by means of a custom module (mod_custom) assigned to the menu. The content is rich text (HTML). Each product is entered manually by adding a picture and a text in the WYSIWYG editor, and by inserting a link for the picture and text. Now the issue: When the user clicks on a product, I want to display the corresponding product description article ("SomeProduct") to the left, accounting for the following requirements: The bread crumb now displays "Products - SomeCategory - SomeProduct" The main menu still displays the 2nd level for "Products", and "SomeCategory" is still marked as selected. (I would love if the right section which lists the product would remain in the exact same scroll state, but that's a completely different story.) If I link the product entry from the right hand side directly to the article "SomeProduct", then the article appears to the left, but the breadcrumb and menu are reset. So I wanted to create a hidden menu item "SomeProduct" beneath "SomeCategory", and to link the product entry to that menu item. This way, if I click on the product entry, the article appears to the left, the breadcrumb behaves correctly, and the menu state is preserved. However, it is not possible to configure the SomeProduct menu item as "hidden", therefore it appears in the main menu. I found some resources that suggest to create another menu, called "hidden", which does not use any modules, and to create the "SomeProduct" menu item in that menu. Unfortunately this did not work for me: If I link that menu item from the product entry, and click on that entry, then the article appears to the left, but the menu is reset, and the breadcrumb displays "SomeProduct" instead of "Products SomeCategory SomeProduct". Lucky me! I found an appropriate stackexchange site where I can pour out my heart to you guys. Sure you can help me :-)

  Read the article

• Design for an interface implementation that provides additional functionality

  - by Limbo Exile

  There is a design problem that I came upon while implementing an interface: Let's say there is a Device interface that promises to provide functionalities PerformA() and GetB(). This interface will be implemented for multiple models of a device. What happens if one model has an additional functionality CheckC() which doesn't have equivalents in other implementations? I came up with different solutions, none of which seems to comply with interface design guidelines: To add CheckC() method to the interface and leave one of its implementations empty: interface ISomeDevice { void PerformA(); int GetB(); bool CheckC(); } class DeviceModel1 : ISomeDevice { public void PerformA() { // do stuff } public int GetB() { return 1; } public bool CheckC() { bool res; // assign res a value based on some validation return res; } } class DeviceModel2 : ISomeDevice { public void PerformA() { // do stuff } public int GetB() { return 1; } public bool CheckC() { return true; // without checking anything } } This solution seems incorrect as a class implements an interface without truly implementing all the demanded methods. To leave out CheckC() method from the interface and to use explicit cast in order to call it: interface ISomeDevice { void PerformA(); int GetB(); } class DeviceModel1 : ISomeDevice { public void PerformA() { // do stuff } public int GetB() { return 1; } public bool CheckC() { bool res; // assign res a value based on some validation return res; } } class DeviceModel2 : ISomeDevice { public void PerformA() { // do stuff } public int GetB() { return 1; } } class DeviceManager { private ISomeDevice myDevice; public void ManageDevice(bool newDeviceModel) { myDevice = (newDeviceModel) ? new DeviceModel1() : new DeviceModel2(); myDevice.PerformA(); int b = myDevice.GetB(); if (newDeviceModel) { DeviceModel1 newDevice = myDevice as DeviceModel1; bool c = newDevice.CheckC(); } } } This solution seems to make the interface inconsistent. For the device that supports CheckC(): to add the logic of CheckC() into the logic of another method that is present in the interface. This solution is not always possible. So, what is the correct design to be used in such cases? Maybe creating an interface should be abandoned altogether in favor of another design?

  Read the article

• How to run a local and external website on same computer with 2 NIC's, 2 Routers and 3 seperate networks?

  - by CandN

  Hello and hopefully I can get some answers to my question, though I think I'm making it more complicated for myself than it has to be. My business is a used auto dealership, and I'm in the process of connecting it to the world - via ethernet from the business server [running Xubuntu] to the ISP's ethernet router/modem, so that I can host our own website (no more than 5-10 people probably visiting at any time - mainly paying their bill), as well as set up a web based internal-intranet site - via DD-WRT Router on the 2nd NIC on the business server - that'll be accessed over Wifi from employees personal devices. On the other end of this is trying to offer free wifi to customers that is completely seperate of the 2 mentioned above networks. Quick Rundown: 1. Web Site for Customers to access. I'm going to use no-ip.org for DNS for the moment being, so I'll have a site that customers can access from anywhere in the world at "mybiz.no-ip.org". This will be forwarded to NIC #1 on the server, possibly at an address like "108.69.." as its being provided an IP from the ISP's modem/router, that is from Time Warner, and they allow NO! configuration options. Web Site for employees to access. I'm trying not to use the server too much as a desktop, only for critical situations, so having a backend thats seperate from the front-facing website is critical. This will be the DD-WRT router hardwired into NIC #2 on the server. This WiFi will be password accessible. Public WiFi for customers. The DD-WRT can seperate networks if I'm correct, I just can't seem to understand how to seperate the 2 and still have internet access on both. I've done it before, but the "Public" wifi (with no password set to connect) kept dropping the connection like a problem was happening that I couldn't figure out. So if I could do a little drawing, this is how it would/should possibly look. ISP -- [Sends Public Facing IP of 108.69.*.1/8] -- ISP Modem Router ISP Modem Router (Ethernet Only) -- [Gives Private IP 108.69.*.2] -- Server NIC #1 Server NIC #1 -- [Gives Private IP 108.69.*.3] -- DD-WRT Router DD-WRT Router -- [DHCP Enabled Giving IP's 172.16.0.0/16] -- Employees Network | | --------- [DHCP Enabled Giving IP's 192.168.1.0/24] -- Public WIFI Hope it's not too confusing, but it anyone could give me some good direct tutorials on how to accomplish this, or if YOU know, then it'll be alot of help. Thanks to all in advance. Need anything else to be explained? Don't hesitate to ask! *Using The LAMP stack with Webmin/VirtualMin -Customer site is located in /var/www2/ -Private Employees site is located in /var/www/ Using no-ip.org's dynamic client updater

  Read the article

• Using a SQL Prompt snippet with template parameters

  - by SQLDev

  As part of my product management role I regularly attend trade shows and man the Red Gate booth in the vendor exhibition hall. Amongst other things this involves giving product demos to customers. Our latest demo involves SQL Source Control and SQL Test in a continuous integration environment. In order to demonstrate quite how easy it is to set up our tools from scratch we start the demo by creating an entirely new database to link to source control, using an individual database name for each conference attendee. In SQL Server Management Studio this can be done either by selecting New Database from the Object Explorer or by executing “CREATE DATABASE DemoDB_John” in a query window. We recently extended the demo to include SQL Test. This uses an open source SQL Server unit testing framework called tSQLt (www.tsqlt.org), which has a CLR object that requires EXTERNAL_ACCESS to be set as follows: ALTER DATABASE DemoDB_John SET TRUSTWORTHY ON This isn’t hard to do, but if you’re giving demo after demo, this two-step process soon becomes tedious. This is where SQL Prompt snippets come into their own. I can create a snippet named create_demo_db for this following: CREATE DATABASE DemoDB_John GO USE DemoDB_John GO ALTER DATABASE DemoDB_John SET TRUSTWORTHY ON Now I just have to type the first few characters of the snippet name, select the snippet from SQL Prompt’s candidate list, and execute the code. Simple! The problem is that this can only work once due to the hard-coded database name. Luckily I can leverage a nice feature in SQL Server Management Studio called Template Parameters. If I modify my snippet to be: CREATE DATABASE <DBName,, DemoDB_> GO USE <DBName,, DemoDB_> GO ALTER DATABASE <DBName,, DemoDB_> SET TRUSTWORTHY ON Once I’ve invoked the snippet, I can press Ctrl-Shift-M, which calls up the Specify Values for Template Parameters dialog, where I can type in my database name just once. Now you can click OK and run the query. Easy. Ideally I’d like for SQL Prompt to auto-invoke the Template Parameter dialog for all snippets where it detects the angled bracket syntax, but typing in the keyboard shortcut is a small price to pay for the time savings.

  Read the article

• NDepend 4.0 Released

  - by Anthony Trudeau

  Last week version 4.0 of NDepend was released.  NDepend is a Visual Studio add-in designed for intense code analysis with the goal of high quality code.  A month ago I wrapped up my evaluation of the previous version of NDepend. The new version contains many minor changes, several bug fixes, and adds about 50 new code rules.  The version also adds support for Visual Studio 11, .NET Framework 4.5, and SilverLight 5.0.  But, the biggest change was the shift from CQL to CQLinq. Introducing CQLinq The latest version replaces the CQL rules language with CQLinq (CQL is still an option although the editor is buried).  As you might guess CQLinq is a flavor of Linq designed specifically for the code rules. The best way to illustrate the differences is with an example.  I used the following CQL example in Part 3 of my review: WARN IF Count > 0 IN SELECT TYPES WHERE IsInterface AND !NameLike “I” This same query looks like this when implemented in CQLinq: warnif count > 0 from t in Types where t.IsInterface == true && !t.NameLike(“I”) select t I like the syntax and it is a natural fit, but I found writing the queries frustrating in the Queries and Rules Edit window.  The Queries and Rules Edit window replaces the CQL Query Edit window.  The new editor has the same style of Intellisense as the previous editor.  However, it has a few annoyances.  The error indicator is a red block.  It has the tendency of obscuring your cursor.  Additionally, writing CQLing queries is like writing plain old Linq queries, so the fact that the editor uses Enter to select from Intellisense instead of Tab is jarring.  These issues can be an obstacle to writing queries quickly.CQLinq makes it possible to write rules that weren't possible before.  Additionally, a JustMyCode domain is now possible making it easy to eliminate generated code from the analysis.Should you Buy? I recommend NDepend overall.  It has some rough points for me that I have detailed in my earlier evaluation (starting here).  But, it’s definitely worth the money.  The bigger question is: should I pay for the upgrade to 4.0?  At this point I’m on the fence, but I would go for it if you need support for Visual Studio 2011, .NET Framework 4.5, or Silverlight 5.0; or if you need one of the many rules that weren't possible before CQLinq. Disclaimer: Patrick Smacchia contacted me about reviewing NDepend. I received a free license in return for sharing my experiences and talking about the capabilities of the add-in on this site. There is no expectation of a positive review elicited from the author of NDepend. Resources: NDepend Release Notes

  Read the article

• Windows8, JavaScript and HTML5 - A good thing?

  - by Albers

  Most of us have seen the Windows 8 news regarding support for native HTML5/JavaScript applications. The press has pushed this as a potential threat to the .NET developer community because JavaScript and HTML5 were called "our new developer platform". The press release refers to "Web-connected and Web-powered apps built using HTML5 and JavaScript that have access to the full power of the PC.".Microsoft has also been hush on details related to these comments. Before we buy the hype and start worrying about a world where we drop our Visual Studio licenses and buy DreamWeaver - let's think about how Windows 8 HTML/JavaScript applications would be implemented. The HTML5 spec offers support for offline applications, but this won't offer the OS-integrated experience the press release refers to. MS has to be planning a way to extend access beyond the traditional JavaScript feature set. Microsoft has a similar option today: HTML Applications or HTAs. They come close to required features, but HTAs need ActiveX or Java integration to provide the promised OS-level access. I'm guessing that Microsoft's future OS strategy isn't built on developers cranking out ActiveX controls or Java applets. So where is Microsoft headed? One possibility is that MS builds a new JavaScript framework from the ground up outside their current APIs. Another idea would be for Microsoft to add support for JavaScript as a first class .NET language using the Dynamic Language Runtime. A solution based on the DLR could be integrated into an HTA-like model to provide the promised access, along with the full range of features in .NET Framework. Security comes included in the Framework. And the work necessary to support this integration would tie in nicely with the effort MS has recently made providing better JavaScript and HTML5 support in Visual Studio 2010. As a bonus, a full-fledged JavaScript DLR implementation would allow single language web solutions across client and server (think node.js) and would appeal to developers who are familiar with JavaScript but have less experience with the Microsoft tech stack. We will all get a better picture after the Build conference in September. But in the mean time we know that Microsoft has a reputation for providing strong developer support. We might want to reserve our harshest judgement and consider that the press release could hint at new opportunities for .NET development.

  Read the article

• Unable to Mount an external hard drive (NTFS)

  - by Mediterran81

  Ubuntu 11.10. When I plug my external Drive Western Digital MyPassport (500Go NTFS) I named WD. I get the following error: Unable to mount WD Error mounting: mount exited with exit code 1: helper failed with: mount: according to mtab, /dev/sdb1 is already mounted on /media/WD mount failed I have no problem with the internal NTFS partitions that auto-mounts on startup (ntfs-config does that). If I plug the WD before I boot Ubuntu, upon login, it's recognized and I can access without no problem. But if I remove it using (Safely remove) and then replug it, I get the error above. Here is my fstab: # /etc/fstab: static file system information. # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 #Entry for /dev/sda5 : UUID=24540d0f-5803-493c-ace9-e3b3c0cedb26 / ext4 errors=remount-ro 0 1 #Entry for /dev/sda3 : UUID=E4C43F7EC43F51D2 /media/OS ntfs-3g defaults,locale=en_US.UTF-8 0 0 #Entry for /dev/sda2 : UUID=6A0070F10070C61B /media/RECOVERY ntfs-3g defaults,locale=en_US.UTF-8 0 0 #Entry for /dev/sdb1 : UUID=EA6854D268549F5F /media/WD ntfs-3g defaults,nosuid,nodev,locale=en_US.UTF-8 0 0 #Entry for /dev/sda6 : UUID=ed077c52-c50e-406c-9120-9cb6f86ec204 none swap sw 0 0 Here is my mtab /dev/sda5 / ext4 rw,errors=remount-ro,commit=0 0 0 proc /proc proc rw,noexec,nosuid,nodev 0 0 sysfs /sys sysfs rw,noexec,nosuid,nodev 0 0 fusectl /sys/fs/fuse/connections fusectl rw 0 0 none /sys/kernel/debug debugfs rw 0 0 none /sys/kernel/security securityfs rw 0 0 udev /dev devtmpfs rw,mode=0755 0 0 devpts /dev/pts devpts rw,noexec,nosuid,gid=5,mode=0620 0 0 tmpfs /run tmpfs rw,noexec,nosuid,size=10%,mode=0755 0 0 none /run/lock tmpfs rw,noexec,nosuid,nodev,size=5242880 0 0 none /run/shm tmpfs rw,nosuid,nodev 0 0 /dev/sda3 /media/OS fuseblk rw,nosuid,nodev,allow_other,blksize=4096 0 0 /dev/sda2 /media/RECOVERY fuseblk rw,nosuid,nodev,allow_other,blksize=4096 0 0 /dev/sdb1 /media/WD fuseblk rw,nosuid,nodev,allow_other,blksize=4096 0 0 binfmt_misc /proc/sys/fs/binfmt_misc binfmt_misc rw,noexec,nosuid,nodev 0 0 gvfs-fuse-daemon /home/hanine/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,user=hanine 0 0 Appearently it cannot be mounted because upon login, it finds that it is already mounted. Some sort of conflict. Does anyone have a clue on how to solve this. Thanks.

  Read the article

• In a state machine, is it a good idea to separate states and transitions?

  - by codablank1

  I have implemented a small state machine in this way (in pseudo code): class Input {} class KeyInput inherits Input { public : enum { Key_A, Key_B, ..., } } class GUIInput inherits Input { public : enum { Button_A, Button_B, ..., } } enum Event { NewGame, Quit, OpenOptions, OpenMenu } class BaseState { String name; Event get_event (Input input); void handle (Event e); //event handling function } class Menu inherits BaseState{...} class InGame inherits BaseState{...} class Options inherits BaseState{...} class StateMachine { public : BaseState get_current_state () { return current_state; } void add_state (String name, BaseState state) { statesMap.insert(name, state);} //raise an exception if state not found BaseState get_state (String name) { return statesMap.find(name); } //raise an exception if state or next_state not found void add_transition (Event event, String state_name, String next_state_name) { BaseState state = get_state(state_name); BaseState next_state = get_state(next_state_name); transitionsMap.insert(pair<event, state>, next_state); } //raise exception if couple not found BaseState get_next_state(Event event, BaseState state) { return transitionsMap.find(pair<event, state>); } void handle(Input input) { Event event = current_state.get_event(input) current_state.handle(event); current_state = get_next_state(event, current_state); } private : BaseState current_state; map<String, BaseState> statesMap; //map of all states in the machine //for each couple event/state, this map stores the next state map<pair<Event, BaseState>, BaseState> transitionsMap; } So, before getting the transition, I need to convert the key input or GUI input to the proper event, given the current state; thus the same key 'W' can launch a new game in the 'Menu' state or moving forward a character in the 'InGame' state; Then I get the next state from the transitionsMap and I update the current state Does this configuration seem valid to you ? Is it a good idea to separate states and transitions ? And I have some kind of trouble to represent a 'null state' or a 'null event'; What initial value can I give to the current state and which one should be returned by get_state if it fails ?

  Read the article

• Lubuntu wireless issue with Broadcom chipset

  - by Variant Web Solutions

  I'm a web dev that just started a new venture in buying wiped laptops in bulk and selling them at a low cost to lower income families that want a laptop that will simply preform and not become virus ridden and require constant maintenance, so naturally I opted for a linux distro and after some research, lubuntu was my top pick. I'm not a stranger to linux as all of my servers for my web dev business are linux, but I am however new to L/Ubuntu and I'm having some issues with both wifi (broadcom chipsets) on the 20 or so dells that I have right now, D800's, D810's and E5400's. Not sure if you can point me in a solid direction, I've scoured (and implemented) the suggestions on ask ubuntu and still coming up short. On one of the e5400's ( though they all seem to suffer the same errors) I got the following: [code]dell-latitude-e5400@dell-Latitude-E5400:~$ iwconfig lo no wireless extensions. eth0 no wireless extensions. dell-latitude-e5400@dell-Latitude-E5400:~$ lspci 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 02) 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 92) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 02) 00:1f.2 IDE interface: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 2 port SATA Controller [IDE mode] (rev 02) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02) 00:1f.5 IDE interface: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 2 port SATA Controller [IDE mode] (rev 02) 02:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba) 02:01.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 04) 02:01.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 21) 09:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5761e Gigabit Ethernet PCIe (rev 10) dell-latitude-e5400@dell-Latitude-E5400:~$ rfkill Usage: rfkill [options] command Options: --version show version (0.5-1ubuntu1 (Ubuntu)) Commands: help event list [IDENTIFIER] block IDENTIFIER unblock IDENTIFIER where IDENTIFIER is the index no. of an rfkill switch or one of: all wifi wlan bluetooth uwb ultrawideband wimax wwan gps fm nfc dell-latitude-e5400@dell-Latitude-E5400:~$ [/code]

  Read the article

• How to deal with malicious domain redirections?

  - by user359650

  It is possible for anybody to buy a domain name containing negative terms and point it to someone's website in order to damage their reputation. For instance someone could buy the domain child-pornography.com and point it to the address 64.34.119.12 which is the address behind stackoverflow.com and people navigating to the domain in question would end up visualizing content from StackExchange which would be detrimental to StackExchange's image. To illustrate this, I added the entry 64.34.119.12 child-pornography.com to my /etc/hosts file and tested. Here is what I obtained: I personally found this user experience terrible as someone could think that Stack Exchange are in favor of child pornography and awaiting support from the community to create a Q&A site about it. I tested with other websites and experienced other behaviors that I would categorize as follows: 1 - Useful 404 page (happens with stackoverflow.com): For me the worst way of handling this as the image of the targeted website is directly associated with the offending domain. The more useful the 404 page, the bigger the impression that the targeted website would be willing to help with child pornography. 2 - Redirection (happens with microsoft.com): For instance when accessing child-pornography.com you get redirected to www.microsoft.com. It isn't as bad as above as the offending domain name never appears alongside the targeted website's content, but still bad in my opinion as it gives the impression the targeted website bought the offending domain and redirected it to their website to get more traffic. 3 - Server error (happens with lemonde.fr): You get an error from the webserver which page doesn't contain any content that can be associated with the targeted website (e.g. default Apache 404 page, completely blank page). I believe that is good as the identify of the targeted website isn't revealed. Above are the various behaviors I experienced, but I also thought about a fourth way of dealing with this which is described below. 4 - Disclaimer page (haven't found any website implementing that technique): Display a message such as : "You ended here because someone bought and linked the child-pornography.com domain to our website. We do not own this domain and do not associate ourselves with it. This request has been logged by our servers and we will raise this issue with the competent authorities to have this domain taken down. If you want to access our website, please click here." The good thing about this method is that it can be implemented at application layer (good if you don't have control over web server which happens with some hosting solutions), allows you to protect yourself from any liability, and offer the visitor to be redirected to your own website. Which of the above options would you implement to deal with malicious domain linking (IMO only options 3 and 4 are worth considering) ?

  Read the article

• Pretty URL in ADF Faces of JDeveloper 11.1.2.2

  - by Frank Nimphius

  Many features planned for Oracle JDeveloper 12c find their way into current releases of Oracle JDeveloper 11g R1 and JDeveloper 11g R2. One example of such a feature is "pretty URL" - or "clean URL" as the Oracle JDeveloper 11g R2 (11.1.2.2) documentation puts it. "A.2.3.24 Clean URLs Historically, ADF Faces has used URL parameters to hold information, such as window IDs and state. However, URL parameters can prevent search engines from recognizing when URLs are actually the same, and therefore interfere with analytics. URL parameters can also interfere with bookmarking. By default, ADF Faces removes URL parameters using the HTML5 History Management API. If that API is unavailable, then session cookies are used.You can also manually configure how URL parameters are removed using the context parameter oracle.adf.view.rich.prettyURL.OPTIONS. Set the parameter to off so that no parameters are removed. Set the parameter to useHistoryApi to only use the HTML5 History Management API. If a browser does not support this API, then no parameters will be removed. Set the parameter to useCookies to use session cookies to remove parameters. If the browser does not support cookies, then no parameters will be removed." See: http://docs.oracle.com/cd/E26098_01/web.1112/e16181/ap_config.htm#ADFUI12856 So basically, what this part in the documentation says is: In JDeveloper 11g R2 (11.1.2.2), Oracle ADF Faces automatically removes its internally used dynamic parameters from the URL You can influence the setting with the prettyURL.OPTIONS context option, which however is not recommended you to do because the default behavior is able to detect if the browser client supports HTML 5 History management or not. In the latter case it the uses a session cookie and if this doesn't work, falls back to the "old" URL parameter adding. The information that is not so explicit and clearly mentioned in the documentation is that this is only for ADF Faces parameters (such as _afrLoop, Adf-Window-Id, etc.), but not the ADF controller token (_adf.ctrl-state)! Removing the ADF controller token is an enhancement request that will be implemented in Oracle JDeveloper 12c

  Read the article

• Improving the performance of JDeveloper11g (part 2) and JVMs in general

  - by asantaga

  Just received an email from one of our JVM developers who read my blog entry on Performance tuning JDeveloper11g and he's confirmed that all of the above parameters are totally supported :-) He's also provided a description of the parameters so we can learn what magic is actually being applied. - -XX:+AggressiveOpts -- this enables the latest and greatest JVM optimizations. It will likely help most Java applications. It's fully supported. The downside of it is that because it has the latest and greatest optimizations, there is some small probability that it may not offer as good of an experience. As those features enabled with this command line option have "matured", they are made the default in a future JDK release. So, you can think of this command line option as the place where the newest optimizations get introduced. Some time later they are moved out from under AggressiveOpts to become default behavior. -XX:+OptimizeStringConcat -- only works with the -server JVM. It may be enabled by the default in a future JDK 7 update release. This option delays the construction of a StringBuilder/StringBuffer and attempts to avoid re-sizing the underlying char[] by attempting to detect the size of the char[] to allocate based on what's being appended to the StringBuilder/StringBuffer. -XX:+UseStringCache -- I would not suggest using this unless you knew that JDeveloper allocated the same string over and over again. And, the string that's allocated over and over again is one of the first 100,000 allocated strings. In short, I'd recommend against using it. And, in fact, in Java 7 (currently) does not include this feature. -XX:+UseCompressedOops -- applicable to 64-bit JVMs. And, if you're using a 64-bit JVM, I'd suggest you use it. It's auto enabled in JDK 7 64-bit JVMs and later JDK 6 64-bit JVMs enable it by default too. -XX:+UseGCOverheadLimit -- by default this option is already enabled. One other command line option to consider is -XX:+TieredCompilation for a JDK 6 Update 25 or later, or JDK 7. This gives you the startup of a -client JVM and the peak performance of a -server JVM. Awesome-ness!  Finally, Charlies also pointed out to me a "new" book he's just published where he goes into the details of JVM tuning, a must for all Fusion Middleware tuning exercises..  (click the book)  Thanks Charlie!

  Read the article

• How is programming affected by spatial aptitude?

  - by natli

  The longer I work on a project, the less clear it becomes. It's like I cannot seperate various classes/objects anymore in my head. Everything starts mixing up, and it's extremely hard to take it all apart again. I start putting functions in classes where they really don't belong, and make silly mistakes such as writing code that I later find was 100% obsolete; things are no longer clearly mappable in my head. It isn't until I take a step back for several hours (or days somtimes!) that I can actually see what's going on again, and be productive. I usually try to fight through this, I am so passionate about coding that I wouldn't for the life of me know what else I could be doing. This is when stuff can get really weird, I get so up in my head that I sort of lose touch with reality (to some extent) in that various actions, such as pouring a glass of water, no longer happen on a concious level. It happens on auto pilot, during which pretty much all of my concious concentration (is that even a thing?) is devoted to borderline pointless problem solving (trying to seperate elements of code). It feels like a losing battle. So I took an IQ test a while ago (Wechsler Adult Intelligence Scale I believe it was) and it turned out my Spatial Aptitude was quite low. I still got a decent score, just above average, so I won't have to poke things with a stick for a living, but I am a little worried that this is such a handicap when writing/engineering computer programs that I won't ever be able to do it seriously or professionally. I am very much interested in what other people think of this.. could a low spatial aptitude be the cause of the above described problems? Maybe I should be looking more along the lines of ADD or something similar, because I did get diagnosed with ADD at the age of 17 (5 years ago) but the medicine I received didn't seem to affect me that much so I never took it all that serious. Sorry if I got a little off topic there, I know this is not a mental help board, the question should be clear; How is programming affected by spatial aptitude? As far as I know people are born with low/med/high spatial aptitude, so I think it's interesting to find out if the more fortunate are better programmers by birth right.

  Read the article

• Java JRE 1.6.0_35 Certified with Oracle E-Business Suite

  - by Steven Chan (Oracle Development)

  The latest Java Runtime Environment 1.6.0_35 (a.k.a. JRE 6u35-b10) is now certified with Oracle E-Business Suite Release 11i and 12 desktop clients.   What's new in Java 1.6.0_35?See the 1.6.0_35 Update Release Notes for details about what has changed in this release.  This release is available for download from the usual Sun channels and through the 'Java Automatic Update' mechanism. 32-bit and 64-bit versions certified This certification includes both the 32-bit and 64-bit JRE versions. 32-bit JREs are certified on: Windows XP Service Pack 3 (SP3) Windows Vista Service Pack 1 (SP1) and Service Pack 2 (SP2) Windows 7 and Windows 7 Service Pack 1 (SP1) 64-bit JREs are certified only on 64-bit versions of Windows 7 and Windows 7 Service Pack 1 (SP1). Worried about the 'mismanaged session cookie' issue? No need to worry -- it's fixed.  To recap: JRE releases 1.6.0_18 through 1.6.0_22 had issues with mismanaging session cookies that affected some users in some circumstances. The fix for those issues was first included in JRE 1.6.0_23. These fixes will carry forward and continue to be fixed in all future JRE releases.  In other words, if you wish to avoid the mismanaged session cookie issue, you should apply any release after JRE 1.6.0_22.All JRE 1.6 releases are certified with EBS upon release Our standard policy is that all E-Business Suite customers can apply all JRE updates to end-user desktops from JRE 1.6.0_03 and later updates on the 1.6 codeline.  We test all new JRE 1.6 releases in parallel with the JRE development process, so all new JRE 1.6 releases are considered certified with the E-Business Suite on the same day that they're released by our Java team.  You do not need to wait for a certification announcement before applying new JRE 1.6 releases to your EBS users' desktops. Important For important guidance about the impact of the JRE Auto Update feature on JRE 1.6 desktops, see: URGENT BULLETIN: All E-Business Suite End-Users Must Manually Apply JRE 6 Updates References Recommended Browsers for Oracle Applications 11i (Metalink Note 285218.1) Upgrading Sun JRE (Native Plug-in) with Oracle Applications 11i for Windows Clients (Metalink Note 290807.1) Recommended Browsers for Oracle Applications 12 (MetaLink Note 389422.1) Upgrading JRE Plugin with Oracle Applications R12 (MetaLink Note 393931.1) Related Articles Mismanaged Session Cookie Issue Fixed for EBS in JRE 1.6.0_23 Roundup: Oracle JInitiator 1.3 Desupported for EBS Customers in July 2009

  Read the article

• WebCenter Customer Spotlight: Guizhou Power Grid Company

  - by me

  Author: Peter Reiser - Social Business Evangelist, Oracle WebCenter  Solution SummaryGuizhou Power Grid Company is responsible for power grid planning, construction, management, and power distribution in Guizhou Province, serving 39 million people. Giuzhou has 49,823 employees and an annual revenue of over $5 Billion. The business objectives were to consolidate information contained in disparate systems into a single knowledge repository and provide a safe and efficient way for staff and managers to access, query, share, manage, and store business information. Guizhou Power Grid Company saved more than US$693,000 in storage costs, reduced  average search times from 180 seconds to 5 seconds and solved 80% to 90% of technology and maintenance issues by searching the Oracle WebCenter Content management system. Company OverviewA wholly owned subsidiary of China Southern Power Grid Company Limited, Guizhou Power Grid Company is responsible for power grid planning, construction, management, and power distribution in Guizhou Province, serving 39 million people. Giuzhou has 49,823 employees and an annual revenue of over $5 Billion. Business ChallengesThe business objectives were to consolidate information contained in disparate systems, such as the customer relationship management and power grid management systems, into a single knowledge repository and provide a safe and efficient way for staff and managers to access, query, share, manage, and store business information. Solution DeployedGuizhou Power Grid Company  implemented Oracle WebCenter Content to build a content management system that enabled the secure, integrated management and storage of information, such as documents, records, images, Web content, and digital assets. The content management solution was integrated with the power grid, customer service, maintenance, and other business systems, as well as the corporate Web site. Business Results Saved more than US$693,000 in storage costs and shortened the material distribution time by integrating the knowledge management solution with the power grid, customer service, maintenance, and other business systems, as well as the corporate Web site Enabled staff to search 31,650 documents using catalogs, multidimensional attributes, and knowledge maps, reducing average search times from 180 seconds to 5 seconds and saving approximately 1,539 hours in annual search time Gained comprehensive document management, format transformation, security, and auditing capabilities Enabled users to upload new documents and supervisors to check the accuracy of these documents online, resulting in improved information quality control Solved 80% to 90% of technology and maintenance issues by searching the Oracle content management system for information, ensuring IT staff can respond quickly to users’ technical problems Improved security by using role-based access controls to restrict access to confidential documents and information Supported the efficient classification of corporate knowledge by using Oracle’s metadata functions to collect, tag, and archive documents, images, Web content, and digital assets “We chose Oracle WebCenter Content, as it is an outstanding integrated content management platform. It has allowed us to establish a system to access, query, share, manage, and store our corporate assets. This has laid a solid foundation for Guizhou Power Grid Company to improve management practices.” Luo Sixi, Senior Information Consultant, Guizhou Power Grid Company Additional Information Guizhou Power Grid Company Customer Snapshot Oracle WebCenter Content

  Read the article

• C# Dev - I've tried Lisps, but I don't get it.

  - by Jonathan Mitchem

  After a few months of learning about and playing with lisps, both CL and a bit of Clojure, I'm still not seeing a compelling reason to write anything in it instead of C#. I would really like some compelling reasons, or for someone to point out that I'm missing something really big. The strengths of a Lisp (per my research): Compact, expressive notation - More so than C#, yes... but I seem to be able to express those ideas in C# too. Implicit support for functional programming - C# with LINQ extension methods: mapcar = .Select( lambda ) mapcan = .Select( lambda ).Aggregate( (a,b) = a.Union(b) ) car/first = .First() cdr/rest = .Skip(1) .... etc. Lambda and higher-order function support - C# has this, and the syntax is arguably simpler: "(lambda (x) ( body ))" versus "x = ( body )" "#(" with "%", "%1", "%2" is nice in Clojure Method dispatch separated from the objects - C# has this through extension methods Multimethod dispatch - C# does not have this natively, but I could implement it as a function call in a few hours Code is Data (and Macros) - Maybe I haven't "gotten" macros, but I haven't seen a single example where the idea of a macro couldn't be implemented as a function; it doesn't change the "language", but I'm not sure that's a strength DSLs - Can only do it through function composition... but it works Untyped "exploratory" programming - for structs/classes, C#'s autoproperties and "object" work quite well, and you can easily escalate into stronger typing as you go along Runs on non-Windows hardware - Yeah, so? Outside of college, I've only known one person who doesn't run Windows at home, or at least a VM of Windows on *nix/Mac. (Then again, maybe this is more important than I thought and I've just been brainwashed...) The REPL for bottom-up design - Ok, I admit this is really really nice, and I miss it in C#. Things I'm missing in a Lisp (due to a mix of C#, .NET, Visual Studio, Resharper): Namespaces. Even with static methods, I like to tie them to a "class" to categorize their context (Clojure seems to have this, CL doesn't seem to.) Great compile and design-time support the type system allows me to determine "correctness" of the datastructures I pass around anything misspelled is underlined realtime; I don't have to wait until runtime to know code improvements (such as using an FP approach instead of an imperative one) are autosuggested GUI development tools: WinForms and WPF (I know Clojure has access to the Java GUI libraries, but they're entirely foreign to me.) GUI Debugging tools: breakpoints, step-in, step-over, value inspectors (text, xml, custom), watches, debug-by-thread, conditional breakpoints, call-stack window with the ability to jump to the code at any level in the stack (To be fair, my stint with Emacs+Slime seemed to provide some of this, but I'm partial to the VS GUI-driven approach) I really like the hype surrounding Lisps and I gave it a chance. But is there anything I can do in a Lisp that I can't do as well in C#? It might be a bit more verbose in C#, but I also have autocomplete. What am I missing? Why should I use Clojure/CL?

  Read the article

• Would someone please explain Octree Collisions to me?

  - by A-Type

  I've been reading everything I can find on the subject and I feel like the pieces are just about to fall into place, but I just can't quite get it. I'm making a space game, where collisions will occur between planets, ships, asteroids, and the sun. Each of these objects can be subdivided into 'chunks', which I have implemented to speed up rendering (the vertices can and will change often at runtime, so I've separated the buffers). These subdivisions also have bounding primitives to test for collision. All of these objects are made of blocks (yeah, it's that kind of game). Blocks can also be tested for rough collisions, though they do not have individual bounding primitives for memory reasons. I think the rough testing seems to be sufficient, though. So, collision needs to be fairly precise; at block resolution. Some functions rely on two blocks colliding. And, of course, attacking specific blocks is important. Now what I am struggling with is filtering my collision pairs. As I said, I've read a lot about Octrees, but I'm having trouble applying it to my situation as many tutorials are vague with very little code. My main issues are: Are Octrees recalculated each frame, or are they stored in memory and objects are shuffled into different divisions as they move? Despite all my reading I still am not clear on this... the vagueness of it all has been frustrating. How far do Octrees subdivide? Planets in my game are quite large, while asteroids are smaller. Do I subdivide to the size of the planet, or asteroid (where planet is in multiple divisions)? Or is the limit something else entirely, like number of elements in the division? Should I load objects into the octrees as 'chunks' or in the whole, then break into chunks later? This could be specific to my implementation, I suppose. I was going to ask about how big my root needed to be, but I did manage to find this question, and the second answer seems sufficient for me. I'm afraid I don't really get what he means by adding new nodes and doing subdivisions upon adding new objects, probably because I'm confused about whether the tree is maintained in memory or recalculated per-frame.

  Read the article

• What layer to introduce human readable error messages?

  - by MrLane

  One of the things that I have never been happy with on any project I have worked on over the years and have really not been able to resolve myself is exactly at what tier in an application should human readable error information be retrieved for display to a user. A common approach that has worked well has been to return strongly typed/concrete "result objects" from the methods on the public surface of the business tier/API. A method on the interface may be: public ClearUserAccountsResult ClearUserAccounts(ClearUserAccountsParam param); And the result class implementation: public class ClearUserAccountsResult : IResult { public readonly List<Account> ClearedAccounts{get; set;} public readonly bool Success {get; set;} // Implements IResult public readonly string Message{get; set;} // Implements IResult, human readable // Constructor implemented here to set readonly properties... } This works great when the API needs to be exposed over WCF as the result object can be serialized. Again this is only done on the public surface of the API/business tier. The error message can also be looked up from the database, which means it can be changed and localized. However, it has always been suspect to me, this idea of returning human readable information from the business tier like this, partly because what constitutes the public surface of the API may change over time...and it may be the case that the API will need to be reused by other API components in the future that do not need the human readable string messages (and looking them up from a database would be an expensive waste). I am thinking a better approach is to keep the business objects free from such result objects and keep them simple and then retrieve human readable error strings somewhere closer to the UI layer or only in the UI itself, but I have two problems here: 1) The UI may be a remote client (Winforms/WPF/Silverlight) or an ASP.NET web application hosted on another server. In these cases the UI will have to fetch the error strings from the server. 2) Often there are multiple legitimate modes of failure. If the business tier becomes so vague and generic in the way it returns errors there may not be enough information exposed publicly to tell what the error actually was: i.e: if a method has 3 modes of legitimate failure but returns a boolean to indicate failure, you cannot work out what the appropriate message to display to the user should be. I have thought about using failure enums as a substitute, they can indicate a specific error that can be tested for and coded against. This is sometimes useful within the business tier itself as a way of passing via method returns the specifics of a failure rather than just a boolean, but it is not so good for serialization scenarios. Is there a well worn pattern for this? What do people think? Thanks.

  Read the article

• Why would you dual-run an app on Azure and AWS?

  - by Elton Stoneman

  Originally posted on: http://geekswithblogs.net/EltonStoneman/archive/2013/11/10/why-would-you-dual-run-an-app-on-azure-and-aws.aspxI had this question from a viewer of my Pluralsight course, Implementing the Reactive Manifesto with Azure and AWS, and thought I’d publish the response. So why would you dual-run your cloud app by hosting it on Azure and AWS? Sounds like a lot of extra development and management overhead. Well the most compelling reasons are reliability and portability. In 2012 I was working for a client who was making a big investment in the cloud, and at the end of the year we published their first external API for business partners. It was hosted in Azure and used some really nice features to route back into existing on-premise services. We were able to publish a clean, simple API to partners, and hide away the underlying complexity of the internal services while still leveraging them to do all the work. Two days after we went live, we were hit by the Azure SSL certificate expiry outage, and our API was unavailable for the best part of 3 days. Fortunately we had planned a gradual roll-out to partners, so the impact was minimal, but we’d been intending to ramp up quickly, and if the outage had happened a week or two later we would have been in a very bad place. Not least because our app could only run on Azure, we couldn’t package it up for another service without going back and reworking the code. More recently AWS had an issue with a networking device in one of their data centres which caused an outage that took the best part of a day to resolve. In both scenarios the SLAs are worthless, as you’ll get back a small percentage of your cloud expenditure, which is going to be negligible compared to your costs in dealing with the outage. And if your app is built specifically for AWS or Azure then if there’s an extended outage you can’t just deploy it onto a new set of kit from a different supplier. And the chances are pretty good there will be another extended outage, both for Microsoft and for Amazon. But the chances are small that it will happen to both at the same time. So my basic guidance has been: ignore the SLAs, go for better uptime by using two clouds. As soon as you need to scale beyond a single instance, start by scaling out to another cloud. Then scale out to different data centres in both clouds. Then you’ve got dual-cloud, quadruple-datacentre redundancy, so any more scaling you need can be left to the clouds to auto-scale themselves. By running in both clouds, you’ve made your app portable, so in the highly unlikely event that both AWS and Azure go down in multiple regions, you’ll have a deployment package which will let you spin up a new stack on yet another cloud, without having to rework your solution.

  Read the article

• Parenting Opengl with Groups in LibGDX

  - by Rudy_TM

  I am trying to make an object child of a Group, but this object has a draw method that calls opengl to draw in the screen. Its class its this public class OpenGLSquare extends Actor { private static final ImmediateModeRenderer renderer = new ImmediateModeRenderer10(); private static Matrix4 matrix = null; private static Vector2 temp = new Vector2(); public static void setMatrix4(Matrix4 mat) { matrix = mat; } @Override public void draw(SpriteBatch batch, float arg1) { // TODO Auto-generated method stub renderer.begin(matrix, GL10.GL_TRIANGLES); renderer.color(color.r, color.g, color.b, color.a); renderer.vertex(x0, y0, 0f); renderer.color(color.r, color.g, color.b, color.a); renderer.vertex(x0, y1, 0f); renderer.color(color.r, color.g, color.b, color.a); renderer.vertex(x1, y1, 0f); renderer.color(color.r, color.g, color.b, color.a); renderer.vertex(x1, y1, 0f); renderer.color(color.r, color.g, color.b, color.a); renderer.vertex(x1, y0, 0f); renderer.color(color.r, color.g, color.b, color.a); renderer.vertex(x0, y0, 0f); renderer.end(); } } In my screen class I have this, i call it in the constructor MyGroupClass spriteLab = new MyGroupClass(spriteSheetLab); OpenGLSquare square = new OpenGLSquare(); square.setX0(100); square.setY0(200); square.setX1(400); square.setY1(280); square.color.set(Color.BLUE); square.setSize(); //spriteLab.addActorAt(0, clock); spriteLab.addActor(square); stage.addActor(spriteLab); And the render in the screen I have @Override public void render(float arg0) { this.gl.glClear(GL10.GL_COLOR_BUFFER_BIT |GL10.GL_DEPTH_BUFFER_BIT); stage.draw(); stage.act(Gdx.graphics.getDeltaTime()); } The problem its that when i use opengl with parent, it resets all the other chldren to position 0,0 and the opengl renderer paints the square in the exact position of the screen and not relative to the parent. I tried using batch.enableBlending() and batch.disableBlending() that fixes the position problem of the other children, but not the relative position of the opengl drawing and it also puts alpha to the glDrawing. What am i doing wrong?:/

  Read the article

• Why does my int, booleans, doubles does not work?

  - by SystemNetworks

  As you see, my code does not work. When armor1 is true, it would add my life. goldA is another class. public void goldenArmor(GameContainer gc, StateBasedGame sbg, Graphics g) { if(armor1==true) { goldA.life = life; goldA.intelligence = intelligence; goldA.power = power; goldA.lifeLeft = lifeLeft; goldA.head(); goldA.body(); goldA.legs(); } } My other class: package javagame; import org.newdawn.slick.GameContainer; import org.newdawn.slick.Graphics; import org.newdawn.slick.Image; import org.newdawn.slick.Input; import org.newdawn.slick.SlickException; /* Note: Copyright(C)2012 System Networks | Square NET | Julius Bryan Gambe. You cannot copy the style, story of the game and gameplay! To programmers: The int,doubles,strings,booleans are properly sorted out. Please don't mess it up. */ /* NOTE: We have loops but not for programming. The loop is: 1.show the world to user 2.Obtain input from the user 3.Shows the update, repeat step 1 */ import org.newdawn.slick.*; import org.newdawn.slick.state.*; import org.lwjgl.input.Mouse; //contents: // public class GoldenArmor{ //get it from play public int life; public double intelligence; public int lifeLeft; public double power; public GoldenArmor() { // TODO Auto-generated constructor stub } //start here public void head() { life += 10; intelligence +=0.5; } public void body() { lifeLeft += 100; } public void legs() { power += 100; } } /* SYSTEM NETWORKS(C) 2012 NET FRONT */ The life, intelligence, power, lifeLeft are nothing but to use it as just reference to prevent stack overflow. And at my main class, it becomes my real booleans, int, doubles. How do I fix this? It does not add it to my normal int.

  Read the article

• What is a good strategy for binding view objects to model objects in C++?

  - by B.J.

  Imagine I have a rich data model that is represented by a hierarchy of objects. I also have a view hierarchy with views that can extract required data from model objects and display the data (and allow the user to manipulate the data). Actually, there could be multiple view hierarchies that can represent and manipulate the model (e.g. an overview-detail view and a direct manipulation view). My current approach for this is for the controller layer to store a reference to the underlying model object in the View object. The view object can then get the current data from the model for display, and can send the model object messages to update the data. View objects are effectively observers of the model objects and the model objects broadcast notifications when properties change. This approach allows all the views to update simultaneously when any view changes the model. Implemented carefully, this all works. However, it does require a lot of work to ensure that no view or model objects hold any stale references to model objects. The user can delete model objects or sub-hierarchies of the model at any time. Ensuring that all the view objects that hold references to the model objects that have been deleted is time-consuming and difficult. It feels like the approach I have been taking is not especially clean; while I don't want to have to have explicit code in the controller layer for mediating the communication between the views and the model, it seems like there must be a better (implicit) approach for establishing bindings between the view and the model and between related model objects. In particular, I am looking for an approach (in C++) that understands two key points: There is a many to one relationship between view and model objects If the underlying model object is destroyed, all the dependent view objects must be cleaned up so that no stale references exist While shared_ptr and weak_ptr can be used to manage the lifetimes of the underlying model objects and allows for weak references from the view to the model, they don't provide for notification of the destruction of the underlying object (they do in the sense that the use of a stale weak_ptr allows for notification), but I need an approach that notifies the dependent objects that their weak reference is going away. Can anyone suggest a good strategy to manage this?

  Read the article

• 2D game - Missile shooting problem on Android

  - by Niksa

  Hello, I have to make a tank that sits still but moves his turret and shoots missiles. As this is my first Android application ever and I haven't done any game development either, I've come across a few problems... Now, I did the tank and the moving turret once I read the Android tutorial for the LunarLander sample code. So this code is based on the LunarLander code. But I'm having trouble doing the missile firing then SPACE button is being pressed. private void doDraw(Canvas canvas) { canvas.drawBitmap(backgroundImage, 0, 0, null); // draws the tank canvas.drawBitmap(tank, x_tank, y_tank, new Paint()); // draws and rotates the tank turret canvas.rotate((float) mHeading, (float) x_turret + mTurretWidth, y_turret); canvas.drawBitmap(turret, x_turret, y_turret, new Paint()); // draws the grenade that is a regular circle from ShapeDrawable class bullet.setBounds(x_bullet, y_bullet, x_bullet + width, y_bullet + height); bullet.draw(canvas); } UPDATE GAME method private void updateGame() throws InterruptedException { long now = System.currentTimeMillis(); if (mLastTime > now) return; double elapsed = (now - mLastTime) / 1000.0; mLastTime = now; // dUP and dDown, rotates the turret from 0 to 75 degrees. if (dUp) mHeading += 1 * (PHYS_SLEW_SEC * elapsed); if (mHeading >= 75) mHeading = 75; if (dDown) mHeading += (-1) * (PHYS_SLEW_SEC * elapsed); if (mHeading < 0) mHeading = 0; if (dSpace){ // missile Logic, a straight trajectorie for now x_bullet -= 1; y_bullet -= 1; //doesn't work, has to be updated every pixel or what? } boolean doKeyDown(int keyCode, KeyEvent msg) { boolean handled = false; synchronized (mSurfaceHolder) { if (keyCode == KeyEvent.KEYCODE_SPACE){ dSpace = true; handled = true; } if (keyCode == KeyEvent.KEYCODE_DPAD_UP){ dUp = true; handled = true; } if (keyCode == KeyEvent.KEYCODE_DPAD_DOWN){ dDown = true; handled = true; } return handled; } } } a method run that runs the game... public void run() { while (mRun) { Canvas c = null; try { c = mSurfaceHolder.lockCanvas(null); synchronized (mSurfaceHolder) { if (mMode == STATE_RUNNING) updateGame(); doDraw(c); } } catch (InterruptedException e) { // TODO Auto-generated catch block e.printStackTrace(); } finally { // do this in a finally so that if an exception is thrown // during the above, we don't leave the Surface in an // inconsistent state if (c != null) { mSurfaceHolder.unlockCanvasAndPost(c); } } } } So the question would be, how do I make that the bullet is fired on a single SPACE key press from the turret to the end of the screen? Could you help me out here, I seem to be in the dark here... Thanks, Niksa

  Read the article

• Several New Hints

  - by Ondrej Brejla

  Hi all! Today we would like to introduce you some of our new experimental hints for NetBeans 7.2. They are called: Unused Use Statement and Immutable Variables. Unused Use Statement This hint is quite simple. It highlights (underlines) your use statements, which are not used. Typical use case is after some refactoring, when you forgot to remove some obsolete use statements. This hint warns you on them and allows you to remove them easily. Just click on the hint bulb in the gutter and select Remove Unused Use Statement. And of course, it works in multiple use statements combined too. Immutable Variables The next one is the hint which checks too many assignments into a variable. And why? That's simple. Mostly you should use just one assignment into one variable. But sometimes you are lazy and you do something like: But it's quite wrong, because what you really do is: And that's exactly the case, when our new hint warns you, that Too many assignments (2) into variable $foo occured. Nothing more. Yes, we know that there are some cases, where could be more assignments and no warning should occur, e.g.: Because maybe one likes longer increment syntax more than the short one. So we tried to handle these cases to don't bother you if it's not a need. Note: We are almost sure that this hint doesn't cover all your use cases, because there are a lot of them. So if you find something strange, write it into our bugzilla so we can handle it better for you. Thanks for your patience! And the last thing is, that you can set the number of allowed assignments in Tools -> Options -> Editor -> Hints -> PHP: Immutable Variables. Note: This hint works just for a common variables, not for fields. We have an enhancement request for that and it should be implemented in next version of NetBeans (probably 7.3). And that's all for today and as usual, please test it and if you find something strange, don't hesitate to file a new issue (product php, component Editor). Thanks.

  Read the article

< Previous Page | 317 318 319 320 321 322 323 324 325 326 327 328  | Next Page >