Search Results

Search found 10318 results on 413 pages for 'feature detection'.

Page 321/413 | < Previous Page | 317 318 319 320 321 322 323 324 325 326 327 328  | Next Page >

• Why is a fully transparent pixel still rendered?

  - by Mr Bell

  I am trying to make a pixel shader that achieves an effect similar to this video http://www.youtube.com/watch?v=f1uZvurrhig&feature=related My basic idea is render the scene to a temp render target then Render the previously rendered image with a slight fade on to another temp render target Draw the current scene on top of that Draw the results on to a render target that persists between draws Draw the results on to the screen But I am having problems with the fading portion. If I have my pixel shader return a color with its A component set to 0, shouldn't that basically amount to drawing nothing? (Assuming that sprite batch blend mode is set to AlphaBlend) To test this I have my pixel shader return a transparent red color. Instead of nothing being drawn, it draws a partially transparent red box. I hope that my question makes sense, but if it doesnt please ask me to clarify Here is the drawing code public override void Draw(GameTime gameTime) { GraphicsDevice.SamplerStates[1] = SamplerState.PointWrap; drawImageOnClearedRenderTarget(presentationTarget, tempRenderTarget, fadeEffect); drawImageOnRenderTarget(sceneRenderTarget, tempRenderTarget); drawImageOnClearedRenderTarget(tempRenderTarget, presentationTarget); GraphicsDevice.SetRenderTarget(null); drawImage(backgroundTexture); drawImage(presentationTarget); base.Draw(gameTime); } private void drawImage(Texture2D image, Effect effect = null) { spriteBatch.Begin(0, BlendState.AlphaBlend, SamplerState.PointWrap, null, null, effect); spriteBatch.Draw(image, new Rectangle(0, 0, width, height), Color.White); spriteBatch.End(); } private void drawImageOnRenderTarget(Texture2D image, RenderTarget2D target, Effect effect = null) { GraphicsDevice.SetRenderTarget(target); drawImage(image, effect); } private void drawImageOnClearedRenderTarget(Texture2D image, RenderTarget2D target, Effect effect = null) { GraphicsDevice.SetRenderTarget(target); GraphicsDevice.Clear(Color.Transparent); drawImage(image, effect); } Here is the fade pixel shader sampler TextureSampler : register(s0); float4 PixelShaderFunction(float2 texCoord : TEXCOORD0) : COLOR0 { float4 c = 0; c = tex2D(TextureSampler, texCoord); //c.a = clamp(c.a - 0.05, 0, 1); c.r = 1; c.g = 0; c.b = 0; c.a = 0; return c; } technique Fade { pass Pass1 { PixelShader = compile ps_2_0 PixelShaderFunction(); } }

  Read the article

• CodePlex Daily Summary for Wednesday, June 15, 2011

  CodePlex Daily Summary for Wednesday, June 15, 2011Popular ReleasesTerraria World Viewer: Version 1.2: Update June 15thNew User Interface Map drawing will not cause the program to freeze anymore Fixed the "Draw Symbols" (now called "Markers") checkbox not having any effectMVC Controls Toolkit: Mvc Controls Toolkit 1.1.5 RC: Added Extended Dropdown allows a prompt item to be inserted as first element. RequiredAttribute, if present, trggers if no element is chosen Client side javascript function to set/get the values of DateTimeInput, TypedTextBox, TypedEditDisplay, and to bind/unbind a "change" handler The selected page in the pager is applied the attribute selected-page="selected" that can be used in the definition of CSS rules to style the selected page items controls now interpret a null value as an empr...Umbraco CMS: Umbraco CMS 5.0 CTP 1: Umbraco 5 Community Technology Preview Umbraco 5 will be the next version of everyone's favourite, friendly ASP.NET CMS that already powers over 100,000 websites worldwide. Try out our first CTP of version 5 today! If you're new to Umbraco and would like to get a quick low-down on our popular and easy-to-learn approach to content management, check out our intro video here. What's in the v5 CTP box? This is a preview version of version 5 and includes support for the following familiar Umbr...Ribbon Browser for Microsoft Dynamics CRM 2011: Ribbon Browser (1.0.514.30): Initial releaseTerrariViewer: TerrariViewer v3.0 [Terraria Inventory Editor]: In this version, I did an overhaul of the GUI of the program. The only pop-up window you will receive now is a warning box for for when you click on the "Delete" button. Everything has been integrated into the tabs on the form. I added every item included with v1.0.4 of Terraria and added the option to set inventory/bank slots to "No Item". This WILL work with characters that have not been opened in v1.0.4patterns & practices: Project Silk: Project Silk Community Drop 11 - June 14, 2011: Changes from previous drop: Many code changes: please see the readme.mht for details. New "Client Data Management and Caching" chapter. Updated "Application Notifications" chapter. Updated "Architecture" chapter. Updated "jQuery UI Widget" chapter. Updated "Widget QuickStart" appendix and code. Guidance Chapters Ready for Review The Word documents for the chapters are included with the source code in addition to the CHM to help you provide feedback. The PDF is provided as a separat...Orchard Project: Orchard 1.2: Build: 1.2.41 Published: 6/14/2010 How to Install Orchard To install Orchard using Web PI, follow these instructions: http://www.orchardproject.net/docs/Installing-Orchard.ashx. Web PI will detect your hardware environment and install the application. Alternatively, to install the release manually, download the Orchard.Web.1.2.41.zip file. http://orchardproject.net/docs/Manually-installing-Orchard-zip-file.ashx The zip contents are pre-built and ready-to-run. Simply extract the contents o...PowerGUI Visual Studio Extension: PowerGUI VSX 1.3.4: Changes - Got rid of suppressed exceptions on assemblies loading at project startup - Fixed Issue #28535 "No Print Support" - Enabled IntelliSence commands wich are supported by ActiPro Syntax Editor control: ToggleBookmark, NextBookmark, PreviousBookmark, ShowMemberList - Added missing Import directives in PS Script project template - Fixed exception occurring on debug start - Fixed an issue: after creating a new PS project, a debugging session hung being run for the second timeSnippet Designer: Snippet Designer 1.4.0: Snippet Designer 1.4.0 for Visual Studio 2010 Change logSnippet Explorer ChangesReworked language filter UI to work better in the side bar. Added result count drop down which lets you choose how many results to see. Language filter and result count choices are persisted after Visual Studio is closed. Added file name to search criteria. Search is now case insensitive. Snippet Editor Changes Snippet Editor ChangesAdded menu option for the $end$ symbol which indicates where the c...SizeOnDisk: 1.0.9.0: Can handle Right-To-Left languages (issue 316) About box (issue 310) New language: Deutsch (thanks to kyoka) Fix: file and folder context menuDropBox Linker: DropBox Linker 1.1: Added different popup descriptions for actions (copy/append/update/remove) Added popup timeout control (with live preview) Added option to overwrite clipboard with the last link only Notification popup closes on user click Notification popup default timeout increased to 3 sec. Added codeplex link to about .NET Framework 4.0 Client Profile requiredWCF Community Site: WCF Express Interop Bindings 1.0: Welcome to the first release of the WCF Express Interop BindingsThis project provides a starter kit for WCF service developers wishing to connect with Java clients in WebSphere, WebLogic, Metro and Apache. It supports security, MTOM and RM features. For more information see the Landing page We welcome your feedback (Topic: Interop Bindings). Please submit any feature requests / bug fixes via the issue tracker. FeaturesVSIX Installer WCF Bindings for Oracle WebLogic, Oracle Metro, IBM WebS...Mobile Device Detection and Redirection: 1.0.4.1: Stable Release 51 Degrees.mobi Foundation is the best way to detect and redirect mobile devices and their capabilities on ASP.NET and is being used on thousands of websites worldwide. We’re highly confident in our software and we recommend all users update to this version. Changes to Version 1.0.4.1Changed the BlackberryHandler and BlackberryVersion6Handler to have equal CONFIDENCE values to ensure they both get a chance at detecting BlackBerry version 4&5 and version 6 devices. Prior to thi...Kouak - HTTP File Share Server: Kouak Beta 3 - Clean: Some critical bug solved and dependecy problems There's 3 package : - The first, contains the cli server and the graphical server. - The second, only the cli server - The third, only the graphical client. It's a beta release, so don't hesitate to emmit issue ;pRawr: Rawr 4.1.06: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr AddonWe now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including bag and bank items) like Char...AcDown????? - Anime&Comic Downloader: AcDown????? v3.0 Beta6: ??AcDown?????????????，?????????????，????、????。?????Acfun????? ????32??64? Windows XP/Vista/7 ????????????? ??：????????Windows XP???,?????????.NET Framework 2.0???(x86)?.NET Framework 2.0???(x64)，?????"?????????"??? ??v3.0 Beta6 ?????(imanhua.com)????? ???? ?? ??"????","?????","?????","????"?????? "????"?????"????????"?? ??????????? ?????????????? ?????????????/???? ?? ????Windows 7???????????? ????????? ?? ????????????? ???????/??????????? ???????????? ?? ?? ?????(imanh...Pulse: Pulse Beta 2: - Added new wallpapers provider http://wallbase.cc. Supports english search, multiple keywords* - Improved font rendering in Options window - Added "Set wallpaper as logon background" option* - Fixed crashes if there is no internet connection - Fixed: Rewalls downloads empty images sometimes - Added filters* Note 1: wallbase provider supports only english search. Rewalls provider supports only russian search but Pulse automatically translates your english keyword into russian using Google Tr...WPF Application Framework (WAF): WPF Application Framework (WAF) 2.0.0.7: Version: 2.0.0.7 (Milestone 7): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Remark The sample applications are using Microsoft’s IoC container MEF. However, the WPF Application Framework (WAF) doesn’t force you to use the same IoC container in your application. You can use ...SimplePlanner: v2.0b: For 2011-2012 Sem 1 ???2011-2012 ????Visual Studio 2010 Help Downloader: 1.0.0.3: Domain name support for proxy Cleanup old packages bug Writing to EventLog with UAC enabled bug Small fixes & RefactoringNew Projects360U: 360UAd Configuration + Rotator for Windows Phone: Ad Configuration and Rotator for Windows Phone is a set of classes and controls which allow you to remotely manage advertising providers used inside your Windows Phone application. Advertising providers can be plugged in on an 'as needed' so application only ship with the providers being used.CommerceShopSystem: CommerceShopSystemContour strikes again: Collection of extensions for the Umbraco Contour form builderFarseer Physics & GLEED2D Link: This project includes c# files usable to implement the Farseer Physics engine in a level created using GLEED2D.FolderComparer: This DLL holds an extension of the DirectoryInfo class. It contains a logic that helps compare the contents of two folders. HierList Hierarchial Outline ASP.NET Server Control ( using UL or OL and LI ): The HierList ASP WebControl generates a hierarchial list using the UL, OL, and LI html tags. Images Organizator: A C# .Net program that organizes all pictures in a folder by date.KiggDemo: i study kiggLavieOrnamentos: LavieOrnamentos is a MVC project written in C# for a standard business website. I plan to use it as a base for a bigger project, a standard business site framework targeting small companies that just want to display their products and latest news.Multiple Choice Training Application: This is an ASP.Net (VB.Net) Web based training application. This application can be configured to ask multiple choice questions for multiple groups, score based on percentage, create completion certificates and be completely managed via a web interface,Orchard Windows Authentication: This module allows Windows domain users to be authenticated in Orchard.Party Estimator: Party Estimator is a training project based on requirements from O'Reilly's _Head First C#_, and is not intended for widespread use. SharePoint Enforcer - Ensuring large sites comply with standards: SharePoint Enforcer is a utility that aids in governance of large SharePoint sites to ensure that the sites comply with various business rules that have been created to keep the site from growing out of control.SharePoint WarmUp Tool (Claims+FBA): This tools is for warming up (waking) SharPoint sites. It addresses the issue of a 403 forbidden error when the SharePoint web app is in claims mode and FBA. It uses Windows authentication to warm up the sites and bypasses the FBA login redirection causing the 403 forbidden error.Super Mario Limitless: Super Mario Limitless is an in-production Super Mario level engine. It allows you to play your own levels and worlds, play others' levels and worlds, and even play online. With limitless features, you'll spend hours playing and creating.VB.NET ASP.NET MVC 2 - Music Store: This project is a port using the VB language with ASP.NET MVC 2 of the MusicStore application that can be found at : http://mvcmusicstore.codeplex.com/ Veni, Vedi, Velcro...: A personal phone 7 social media app that shows basic elements of design, ad model, panorama etc.XMLServiceMonitor: A Windows service (VB.Net) that allows the monitoring of failure of Servers, Services, Applications, Scheduled Tasks and SQL Jobs. The service is configurable with simple XML files and sends out email notifications of failures.

  Read the article

• SSIS Reporting Pack update

  - by jamiet

  Its been a while since I last posted anything in regard to SSIS Reporting Pack, the most recent release being on 27th May 2012, so here is a short update. There is still lots of work to do on SSIS Reporting Pack; lots more features to add, lots of performance work to be done, and a few bug fixes too. I have also been (fairly) hard at work on a framework to be used in conjunction with SSIS 2012 that I refer to as the Restart Framework (currently residing at http://ssisrestartframework.codeplex.com/). There is still much work to be done on the Restart Framework (not least some useful documentation on how to use it) which is why I haven’t mentioned it publicly before now although I am actively checking in changes. One thing I am considering is amalgamating the two projects into one; this would mean I could build a suite of reports that both work against the SSIS Catalog (what you currently know as “SSIS Reporting Pack”) and also against this Restart Framework thing. No decision has been made as yet though. There have been a number of bug reports and feature suggestions for SSIS Reporting Pack added to the Issue Tracker. Thank you to everyone that has submitted something, rest assured I am not going to ignore them forever; my time is at a premium right now unfortunately due to … well … life… so working on these items isn’t near the top of my priority list. Lastly, I am actively using SSIS Reporting Pack in a production environment right now and I’m happy to report that it is proving to be very useful. One of the reports that I have put a lot of time into is execution executable duration.rdl and its proving very adept at easily identifying bottlenecks in our SSIS 2012 executions: The report allows you to browse through the hierarchy of executables in each execution and each bar represents the duration of each executable in relation to all the other executables; longer bars being a good indication of where problems might lie. The colour of the bar indicates whether it was successful or not (green=success). Hovering over a bar brings up a tooltip showing more information about that executable. Clicking on a bar allows you to compare this particular instance of the executable against other executions. Please do let me know if you are using SSIS Reporting Pack. I would like to hear any anecdotes you might have, good or bad. @Jamiet

  Read the article

• Java Spotlight Episode 85: Migrating from Spring to JavaEE 6

  - by Roger Brinkley

  Interview with Bert Ertman and Paul Bakker on migrating from Spring to JavaEE 6. Joining us this week on the Java All Star Developer Panel is Arun Gupta, Java EE Guy. Right-click or Control-click to download this MP3 file. You can also subscribe to the Java Spotlight Podcast Feed to get the latest podcast automatically. If you use iTunes you can open iTunes and subscribe with this link:  Java Spotlight Podcast in iTunes. Show Notes News Transactional Interceptors in Java EE 7 Larry Ellison and Mark Hurd on Oracle Cloud Duke’s Choice Award submissions open until June 15 Registration for the 2012 JVM Lanugage Summit now open Events June 11-14, Cloud Computing Expo, New York City June 12, Boulder JUG June 13, Denver JUG June 13, Eclipse Juno DemoCamp, Redwoood Shore June 13, JUG Münster June 14, Java Klassentreffen, Vienna, Austria June 18-20, QCon, New York City June 20, 1871, Chicago June 26-28, Jazoon, Zurich, Switzerland July 5, Java Forum, Stuttgart, Germany July 30-August 1, JVM Language Summit, Santa Clara Feature InterviewBert Ertman is a Fellow at Luminis in the Netherlands. Next to his customer assignments he is responsible for stimulating innovation, knowledge sharing, coaching, technology choices and presales activities. Besides his day job he is a Java User Group leader for NLJUG, the Dutch Java User Group. A frequent speaker on Enterprise Java and Software Architecture related topics at international conferences (e.g. Devoxx, JavaOne, etc) as well as an author and member of the editorial advisory board for Dutch software development magazine: Java Magazine. In 2008, Bert was honored by being awarded the coveted title of Java Champion by an international panel of Java leaders and luminaries. Paul Bakker is senior software engineer at Luminis Technologies where he works on the Amdatu platform, an open source, service-oriented application platform for web applications. He has a background as trainer where he teached various Java related subjects. Paul is also a regular speaker on conferences and author for the Dutch Java Magazine.TutorialsPart 1: http://howtojboss.com/2012/04/17/article-series-migrating-spring-applications-to-java-ee-6-part-1/Part 2: http://howtojboss.com/2012/04/17/article-series-migrating-spring-applications-to-java-ee-6-part-2/Part 3: http://howtojboss.com/2012/05/10/article-series-migrating-from-spring-to-java-ee-6-part-3/   Mail Bag What’s Cool Sang Shin in EE team @larryellison JavaOne content selection is almost complete-Notifications coming soon

  Read the article

• ArchBeat Facebook Friday: Top 10 Posts - August 8-14, 2014

  - by Bob Rhubart-Oracle

  5,307 people pay attention to the OTN ArchBeat Facebook Page. Here are the Top 10 posts from that page for the last seven days, August 8-14, 2014. Podcast: ODTUG Kscope 2014: Anatomy of a User Conference - Part 3 There is more to a great user conference than a shared interest in Oracle products. In the final segment of this 3-part OTN ArchBeat Podcast panelists Danny Bryant , Chet "ORACLENERD" Justice, Cameron Lackpour, Debra Lilley, and Mike Riley discuss the nature and importance of community Oracle SOA Suite 12c: The LDAP Adapter quick and easy | Maarten Smeets Maarten Smeets' how-to post describes the installation and configuration of an LDAP server and browser (ApacheDS and Apache Directory Studio). Process level Exception Handling in BPM12c | Abhishek Mittal When an exception occurs while running a process flow you have two choices: 1) retry running the flow object that caused that process flow or 2) move the process instance to the next flow object in the main process flow. Abhishek Mittal shows you how to do both. Building a Responsive WebCenter Portal Application | JayJay Zheng Oracle ACE JayJay Zheng's article addresses the essentials of responsive web design, shows you how to design and develop a responsive WebCenter Portal application, and reviews key development considerations. Cloud Control authorization with Active Directory | Jeroen Gouma Jeroen Gouma takes you step-by-step through the user authortization process in Oracle Enterprise Manager Cloud Control 12c. Video: CIOs Guide to Oracle Products and Solutions | Jessica Keyes The CIO's Guide to Oracle Products and Solutions author Jessica Keyes talks about why input from users and developers is essential to CIOs who want to avoid being escorted out of the building by security guards. Read A CIO's Guide to Oracle Cloud Computing, a sample chapter from the book. Twitter Tuesday - Top 10 @ArchBeat Tweets - August 5-11, 2014 @OTNArchBeat followers from across the galaxy have spoken! Here are the Top 10 tweets for the past seven days. Topics include: Hyperion, OBIEE, ODI, Oracle MAF, and SOA Suite. Recap: Fusion Middleware Summer Camps - Lisbon 2014 | Simon Haslam Oracle ACE Director Simon Haslam's recap of his experience at the Oracle Fusion Middleware Summer Camp in Lisbon, Portugal will make you wish you had been there. WebLogic Data Source Connection Labeling | Steve Felts The connection labeling feature was added in WLS release 10.3.6, and enhanced in release WLS 12.1.3. This post by Steve Felts describes two new connection properties that can be configured on the data source descriptor. Why Mobile Apps <3 REST/JSON | Martin Jarvis Martin Jarvis explores the preference for REST and JSON over SOAP and XML for mobile web services.

  Read the article

• Copying & Pasting Rows Between Grids in SQL Developer

  - by thatjeffsmith

  Apologies for slacking on the blogging front here lately. Still mentally hung over from Open World, and lots of things going on behind the scenes here in Oracle-land. Whilst (love that word) blogging is part of my job, it’s not the ONLY part of my job So a super-quick and dirty ‘trick’ this morning. Copying Query Result Record as New Row in Table Copy and paste is something everyone ‘gets.’ I don’t know we have to thank for that, whether it’s Microsoft or Xerox, but it’s been ingrained in our way of dealing with all things computers. Almost to the detriment of some of our users – they’ll use Copy and Paste when perhaps our Export feature is superior, but I digress. Where it does work just fine is when you want to create a new row in your table that matches a row you have retrieved from an executed query. Just click in the gutter or row number to get the entire row selected Once you have your data selected, do your thing, i.e. ctrl+C or Command/Apple+C or whatever. Now open your view or table editor, go to the data page, and ask for a new row. New record, no data Paste in the data from the clipboard. It’s smart enough to paste the separate values out to the separate columns. The clipboard saves the day, again. If your columns orders are different, just change the order in the grids. If you have extra information, don’t copy the entire row. I know, I know – Jeff this is too simple, why are you wasting our time here? It seems intuitive, but how many of you actually tried this before reading it just now? I seem to get more positive feedback from the very basic user interface 101 tips than the esoteric click-click-click-ctrl-shift-click tricks I prefer to post. Lots of interesting stuff on tap, so stay tuned!

  Read the article

• SQL SERVER – A Puzzle Part 3 – Fun with SEQUENCE in SQL Server 2012 – Guess the Next Value

  - by pinaldave

  Before continuing this blog post – please read the two part of the SEQUENCE Puzzle here A Puzzle – Fun with SEQUENCE in SQL Server 2012 – Guess the Next Value and A Puzzle Part 2 – Fun with SEQUENCE in SQL Server 2012 – Guess the Next Value Where we played a simple guessing game about predicting next value. The answers the of puzzle is shared on the blog posts as a comment. Now here is the next puzzle based on yesterday’s puzzle. I recently shared the puzzle of the blog post on local user group and it was appreciated by attendees. First execute the script which I have written here. Today’s script is bit different than yesterday’s script as well it will require you to do some service related activities. I suggest you try this on your personal computer’s test environment when no one is working on it. Do not attempt this on production server as it will for sure get you in trouble. The purpose to learn how sequence behave during the unexpected shutdowns and services restarts. Now guess what will be the next value as requested in the query. USE AdventureWorks2012 GO -- Create sequence CREATE SEQUENCE dbo.SequenceID AS BIGINT START WITH 1 INCREMENT BY 1 MINVALUE 1 MAXVALUE 500 CYCLE CACHE 100; GO -- Following will return 1 SELECT next value FOR dbo.SequenceID; ------------------------------------- -- simulate server crash by restarting service -- do not attempt this on production or any server in use ------------------------------------ -- Following will return ??? SELECT next value FOR dbo.SequenceID; -- Clean up DROP SEQUENCE dbo.SequenceID; GO Once the server is restarted what will be the next value for SequenceID. We can learn interesting trivia’s about this new feature of SQL Server using this puzzle. Hint: Pay special attention to the difference between new number and earlier number. Can you see the same number in the definition of the CREATE SEQUENCE? Bonus Question: How to avoid the behavior demonstrated in above mentioned query. Does it have any effect of performance? I suggest you try to attempt to answer this question without running this code in SQL Server 2012. You can restart SQL Server using command prompt as well. I will follow up of the answer in comments below. Recently my friend Vinod Kumar wrote excellent blog post on SQL Server 2012: Using SEQUENCE, you can head over there for learning sequence in details. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Puzzle, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Framework 4 Features: User Propogation to the Database

  - by Anthony Shorten

  Once of the features I mentioned in a previous entry was the ability for Oracle Utilities Application Framework V4 to automatically propogate the end user to the database connection. This bears more explanation. In the past releases of the Oracle Utilities Application Framework, all database connections are pooled and shared within a channel of access. So for example, the online connections on the Business Application Server share a common pool of connections and the batch in a thread pool shares a seperate pool of connections. The connections are pooled for performance reasons (the most expensive part of a typical transaction is opening and closing connections so we save time by having them ready beforehand). The idea is that when a business function needs some SQL to be execute it takes a spare connection from the pool, executes the SQL and then returns the connection back to the pool for reuse. Unfortunelty to support the pool being started and ready before the transactions arrives means that you need to have a shared userid (as you dont know the users who need them beforehand). Therefore each connection uses the same database user to execute the SQL it needs. This is acceptable for executing transactions, generally but does not allow the DBA or other tools to ascertain which end user is actually running the transaction. In Oracle Utilities Application Framework V4, we now set the CLIENT_IDENTIFIER to the end userid (not the Login Id) when the connection is taken from the pool and used and reset it back to blank when returned to the pool. The CLIENT_IDENTIFIER is a feature that is present in the Oracle Database connection information. From a monitoring perspective, when a connection to the database is actively running SQL, the end user is now able to be determined by querying the CLIENT_IDENTIFIER on the session object within the database. This can be done in the DBA's favorite monitoring tool (even just some SQL on the v$session table is enough). This has other implications as well. Oracle sells a lot of other security addons to the database and so do third parties. If a site wants to have additional levels of security or auditing in the database then the CLIENT_IDENTIFIER, if supported, is now available to be recorded or used by those products to provide additional levels of security. This facility was one of the highly "nice to haves" that customers would ask us about so we now allow it to be used to allow finer grained monitoring and additional security facilities. Note: This facility is only available for customers using the Oracle Database versions of our products.

  Read the article

• Oracle 5th Annual Maintenance Summit - Orlando March 22-23, 2011

  - by stephen.slade(at)oracle.com

  It's not too late to register today or tomorrow for this exclusive 'Maintenance Professionals Only" event.  In 4 tracks, 27 customer and partner speakers will present case studies and success stories in these 'no-sell zone' sessions. The take-aways will be worth attending!This "2 in 1" event combines a Customer Showcase featuring Orlando Utilities Commission (OUC) and Maintenance Summit.  OUC - the local municipal utility providing residential, commercial, and industrial customers with clean, reliable, and affordable electric and water services - will open the event with their CIO as keynote speaker, and host tours of their fleet, facility, and power generation operations. Recognized as a green leader, OUC has been the most reliable power provider in Florida the past 9 years due, in large part, to the operational efficiencies of its plant and asset maintenance systems. This Summit will feature breakout session tracks for EBS, JD Edwards, PeopleSoft and Sustainability. Highlights include over 12 Oracle solution demo stations, over 25 interactive breakout sessions, pool-side networking reception with live band, partner exhibit pavilion and special appearance by Sean D. Tucker, Team Oracle Stunt-Pilot!  Dates:                   March 22-23, 2011 Location:             Orlando World Center Marriott, Orlando, Florida Evite:                     http://www.oracle.com/us/dm/h2fy11/65971-nafm10019768mpp191c003-oem-304204.html Highlights:          Keynotes, Oracle Expert Demo Stations, Interactive Breakout Sessions, Networking Reception, Partner Pavilion, Speakers Tracks:                 EBS, JDE, PSFT, Sustainability Tours:                  Orlando Utility Operations, Fleet and Facility Oracle Demo Stations:  Agile, AutoVue, Primavera, MOC/SSDM, Utilities, PIM, PDQ, UCM, On Demand, Business Accelerators, Facilities Work Management, EBS Enterprise Asset Management, PeopleSoft Maintenance Management, Technology, Hardware/Sun. Partner-Sponsors:   Viziya, Global PTM, MiPro, Asset Management Solutions, Venutureforth, Impac Services, EAM Master, LLC, Meridium

  Read the article

• Thinktecture.IdentityServer RC

  - by Your DisplayName here!

  I just uploaded the RC of IdentityServer to Codeplex. This release is feature complete and if I don’t get any bug reports this is also pretty much the final V1. Changes from B1 The configuration data access is now based on EF 4.1 code first. This makes it much easier to use different data stores. For RTM I will also provide a SQL script for SQL Server so you can move the configuration to a separate machine (e.g. for load balancing scenarios). I included the ASP.NET Universal Providers in the download. This adds official support for SQL Azure, SQL Server and SQL Compact for the membership, roles and profile features. Unfortunately the Universal Provider use a different schema than the original ASP.NET providers (that sucks btw!) – so I made them optional. If you want to use them go to web.config and uncomment the new provider. The relying party registration entries now have added fields to add extra data that you want to couple with the RP. One use case could be to give the UI a hint how the login experience should look like per RP. This allows to have a different look and feel for different relying parties. I also included a small helper API that you can use to retrieve the RP record based on the incoming WS-Federation query string. WS-Federation single sign out is now conforming to the spec. Certificate based endpoint identities for SSL endpoints are optional now. Added a initial configuration “wizard”. This sets up the signing certificate, issuer URI and site title on the first run. Installation This is still a “developer” release – that means it ships with source code that you have to build it etc. But from that point it should be a little more straightforward as it used to be: Make sure SSL is configured correctly for IIS Map the WebSite directory to a vdir in IIS Run the web site. This should bring up the initial configuration Make sure the worker process account has access to the signing certificate private key Make sure all your users are in the “IdentityServerUsers” role in your role store. Administrators need the “IdentityServerAdministrators” role That should be it. A proper documentation will be hopefully available soon (any volunteers?). Please provide feedback! thanks!

  Read the article

• Dynamically loading Assemblies to reduce Runtime Depencies

  - by Rick Strahl

  I've been working on a request to the West Wind Application Configuration library to add JSON support. The config library is a very easy to use code-first approach to configuration: You create a class that holds the configuration data that inherits from a base configuration class, and then assign a persistence provider at runtime that determines where and how the configuration data is store. Currently the library supports .NET Configuration stores (web.config/app.config), XML files, SQL records and string storage.About once a week somebody asks me about JSON support and I've deflected this question for the longest time because frankly I think that JSON as a configuration store doesn't really buy a heck of a lot over XML. Both formats require the user to perform some fixup of the plain configuration data - in XML into XML tags, with JSON using JSON delimiters for properties and property formatting rules. Sure JSON is a little less verbose and maybe a little easier to read if you have hierarchical data, but overall the differences are pretty minor in my opinion. And yet - the requests keep rolling in.Hard Link Issues in a Component LibraryAnother reason I've been hesitant is that I really didn't want to pull in a dependency on an external JSON library - in this case JSON.NET - into the core library. If you're not using JSON.NET elsewhere I don't want a user to have to require a hard dependency on JSON.NET unless they want to use the JSON feature. JSON.NET is also sensitive to versions and doesn't play nice with multiple versions when hard linked. For example, when you have a reference to V4.4 in your project but the host application has a reference to version 4.5 you can run into assembly load problems. NuGet's Update-Package can solve some of this *if* you can recompile, but that's not ideal for a component that's supposed to be just plug and play. This is no criticism of JSON.NET - this really applies to any dependency that might change.  So hard linking the DLL can be problematic for a number reasons, but the primary reason is to not force loading of JSON.NET unless you actually need it when you use the JSON configuration features of the library.Enter Dynamic LoadingSo rather than adding an assembly reference to the project, I decided that it would be better to dynamically load the DLL at runtime and then use dynamic typing to access various classes. This allows me to run without a hard assembly reference and allows more flexibility with version number differences now and in the future.But there are also a couple of downsides:No assembly reference means only dynamic access - no compiler type checking or IntellisenseRequirement for the host application to have reference to JSON.NET or else get runtime errorsThe former is minor, but the latter can be problematic. Runtime errors are always painful, but in this case I'm willing to live with this. If you want to use JSON configuration settings JSON.NET needs to be loaded in the project. If this is a Web project, it'll likely be there already.So there are a few things that are needed to make this work:Dynamically create an instance and optionally attempt to load an Assembly (if not loaded)Load types into dynamic variablesUse Reflection for a few tasks like statics/enumsThe dynamic keyword in C# makes the formerly most difficult Reflection part - method calls and property assignments - fairly painless. But as cool as dynamic is it doesn't handle all aspects of Reflection. Specifically it doesn't deal with object activation, truly dynamic (string based) member activation or accessing of non instance members, so there's still a little bit of work left to do with Reflection.Dynamic Object InstantiationThe first step in getting the process rolling is to instantiate the type you need to work with. This might be a two step process - loading the instance from a string value, since we don't have a hard type reference and potentially having to load the assembly. Although the host project might have a reference to JSON.NET, that instance might have not been loaded yet since it hasn't been accessed yet. In ASP.NET this won't be a problem, since ASP.NET preloads all referenced assemblies on AppDomain startup, but in other executable project, assemblies are just in time loaded only when they are accessed.Instantiating a type is a two step process: Finding the type reference and then activating it. Here's the generic code out of my ReflectionUtils library I use for this:/// <summary> /// Creates an instance of a type based on a string. Assumes that the type's /// </summary> /// <param name="typeName">Common name of the type</param> /// <param name="args">Any constructor parameters</param> /// <returns></returns> public static object CreateInstanceFromString(string typeName, params object[] args) { object instance = null; Type type = null; try { type = GetTypeFromName(typeName); if (type == null) return null; instance = Activator.CreateInstance(type, args); } catch { return null; } return instance; } /// <summary> /// Helper routine that looks up a type name and tries to retrieve the /// full type reference in the actively executing assemblies. /// </summary> /// <param name="typeName"></param> /// <returns></returns> public static Type GetTypeFromName(string typeName) { Type type = null; // Let default name binding find it type = Type.GetType(typeName, false); if (type != null) return type; // look through assembly list var assemblies = AppDomain.CurrentDomain.GetAssemblies(); // try to find manually foreach (Assembly asm in assemblies) { type = asm.GetType(typeName, false); if (type != null) break; } return type; } To use this for loading JSON.NET I have a small factory function that instantiates JSON.NET and sets a bunch of configuration settings on the generated object. The startup code also looks for failure and tries loading up the assembly when it fails since that's the main reason the load would fail. Finally it also caches the loaded instance for reuse (according to James the JSON.NET instance is thread safe and quite a bit faster when cached). Here's what the factory function looks like in JsonSerializationUtils:/// <summary> /// Dynamically creates an instance of JSON.NET /// </summary> /// <param name="throwExceptions">If true throws exceptions otherwise returns null</param> /// <returns>Dynamic JsonSerializer instance</returns> public static dynamic CreateJsonNet(bool throwExceptions = true) { if (JsonNet != null) return JsonNet; lock (SyncLock) { if (JsonNet != null) return JsonNet; // Try to create instance dynamic json = ReflectionUtils.CreateInstanceFromString("Newtonsoft.Json.JsonSerializer"); if (json == null) { try { var ass = AppDomain.CurrentDomain.Load("Newtonsoft.Json"); json = ReflectionUtils.CreateInstanceFromString("Newtonsoft.Json.JsonSerializer"); } catch (Exception ex) { if (throwExceptions) throw; return null; } } if (json == null) return null; json.ReferenceLoopHandling = (dynamic) ReflectionUtils.GetStaticProperty("Newtonsoft.Json.ReferenceLoopHandling", "Ignore"); // Enums as strings in JSON dynamic enumConverter = ReflectionUtils.CreateInstanceFromString("Newtonsoft.Json.Converters.StringEnumConverter"); json.Converters.Add(enumConverter); JsonNet = json; } return JsonNet; }This code's purpose is to return a fully configured JsonSerializer instance. As you can see the code tries to create an instance and when it fails tries to load the assembly, and then re-tries loading.Once the instance is loaded some configuration occurs on it. Specifically I set the ReferenceLoopHandling option to not blow up immediately when circular references are encountered. There are a host of other small config setting that might be useful to set, but the default seem to be good enough in recent versions. Note that I'm setting ReferenceLoopHandling which requires an Enum value to be set. There's no real easy way (short of using the cardinal numeric value) to set a property or pass parameters from static values or enums. This means I still need to use Reflection to make this work. I'm using the same ReflectionUtils class I previously used to handle this for me. The function looks up the type and then uses Type.InvokeMember() to read the static property.Another feature I need is have Enum values serialized as strings rather than numeric values which is the default. To do this I can use the StringEnumConverter to convert enums to strings by adding it to the Converters collection.As you can see there's still a bit of Reflection to be done even in C# 4+ with dynamic, but with a few helpers this process is relatively painless.Doing the actual JSON ConversionFinally I need to actually do my JSON conversions. For the Utility class I need serialization that works for both strings and files so I created four methods that handle these tasks two each for serialization and deserialization for string and file.Here's what the File Serialization looks like:/// <summary> /// Serializes an object instance to a JSON file. /// </summary> /// <param name="value">the value to serialize</param> /// <param name="fileName">Full path to the file to write out with JSON.</param> /// <param name="throwExceptions">Determines whether exceptions are thrown or false is returned</param> /// <param name="formatJsonOutput">if true pretty-formats the JSON with line breaks</param> /// <returns>true or false</returns> public static bool SerializeToFile(object value, string fileName, bool throwExceptions = false, bool formatJsonOutput = false) { dynamic writer = null; FileStream fs = null; try { Type type = value.GetType(); var json = CreateJsonNet(throwExceptions); if (json == null) return false; fs = new FileStream(fileName, FileMode.Create); var sw = new StreamWriter(fs, Encoding.UTF8); writer = Activator.CreateInstance(JsonTextWriterType, sw); if (formatJsonOutput) writer.Formatting = (dynamic)Enum.Parse(FormattingType, "Indented"); writer.QuoteChar = '"'; json.Serialize(writer, value); } catch (Exception ex) { Debug.WriteLine("JsonSerializer Serialize error: " + ex.Message); if (throwExceptions) throw; return false; } finally { if (writer != null) writer.Close(); if (fs != null) fs.Close(); } return true; }You can see more of the dynamic invocation in this code. First I grab the dynamic JsonSerializer instance using the CreateJsonNet() method shown earlier which returns a dynamic. I then create a JsonTextWriter and configure a couple of enum settings on it, and then call Serialize() on the serializer instance with the JsonTextWriter that writes the output to disk. Although this code is dynamic it's still fairly short and readable.For full circle operation here's the DeserializeFromFile() version:/// <summary> /// Deserializes an object from file and returns a reference. /// </summary> /// <param name="fileName">name of the file to serialize to</param> /// <param name="objectType">The Type of the object. Use typeof(yourobject class)</param> /// <param name="binarySerialization">determines whether we use Xml or Binary serialization</param> /// <param name="throwExceptions">determines whether failure will throw rather than return null on failure</param> /// <returns>Instance of the deserialized object or null. Must be cast to your object type</returns> public static object DeserializeFromFile(string fileName, Type objectType, bool throwExceptions = false) { dynamic json = CreateJsonNet(throwExceptions); if (json == null) return null; object result = null; dynamic reader = null; FileStream fs = null; try { fs = new FileStream(fileName, FileMode.Open, FileAccess.Read); var sr = new StreamReader(fs, Encoding.UTF8); reader = Activator.CreateInstance(JsonTextReaderType, sr); result = json.Deserialize(reader, objectType); reader.Close(); } catch (Exception ex) { Debug.WriteLine("JsonNetSerialization Deserialization Error: " + ex.Message); if (throwExceptions) throw; return null; } finally { if (reader != null) reader.Close(); if (fs != null) fs.Close(); } return result; }This code is a little more compact since there are no prettifying options to set. Here JsonTextReader is created dynamically and it receives the output from the Deserialize() operation on the serializer.You can take a look at the full JsonSerializationUtils.cs file on GitHub to see the rest of the operations, but the string operations are very similar - the code is fairly repetitive.These generic serialization utilities isolate the dynamic serialization logic that has to deal with the dynamic nature of JSON.NET, and any code that uses these functions is none the wiser that JSON.NET is dynamically loaded.Using the JsonSerializationUtils WrapperThe final consumer of the SerializationUtils wrapper is an actual ConfigurationProvider, that is responsible for handling reading and writing JSON values to and from files. The provider is simple a small wrapper around the SerializationUtils component and there's very little code to make this work now:The whole provider looks like this:/// <summary> /// Reads and Writes configuration settings in .NET config files and /// sections. Allows reading and writing to default or external files /// and specification of the configuration section that settings are /// applied to. /// </summary> public class JsonFileConfigurationProvider<TAppConfiguration> : ConfigurationProviderBase<TAppConfiguration> where TAppConfiguration: AppConfiguration, new() { /// <summary> /// Optional - the Configuration file where configuration settings are /// stored in. If not specified uses the default Configuration Manager /// and its default store. /// </summary> public string JsonConfigurationFile { get { return _JsonConfigurationFile; } set { _JsonConfigurationFile = value; } } private string _JsonConfigurationFile = string.Empty; public override bool Read(AppConfiguration config) { var newConfig = JsonSerializationUtils.DeserializeFromFile(JsonConfigurationFile, typeof(TAppConfiguration)) as TAppConfiguration; if (newConfig == null) { if(Write(config)) return true; return false; } DecryptFields(newConfig); DataUtils.CopyObjectData(newConfig, config, "Provider,ErrorMessage"); return true; } /// <summary> /// Return /// </summary> /// <typeparam name="TAppConfig"></typeparam> /// <returns></returns> public override TAppConfig Read<TAppConfig>() { var result = JsonSerializationUtils.DeserializeFromFile(JsonConfigurationFile, typeof(TAppConfig)) as TAppConfig; if (result != null) DecryptFields(result); return result; } /// <summary> /// Write configuration to XmlConfigurationFile location /// </summary> /// <param name="config"></param> /// <returns></returns> public override bool Write(AppConfiguration config) { EncryptFields(config); bool result = JsonSerializationUtils.SerializeToFile(config, JsonConfigurationFile,false,true); // Have to decrypt again to make sure the properties are readable afterwards DecryptFields(config); return result; } }This incidentally demonstrates how easy it is to create a new provider for the West Wind Application Configuration component. Simply implementing 3 methods will do in most cases.Note this code doesn't have any dynamic dependencies - all that's abstracted away in the JsonSerializationUtils(). From here on, serializing JSON is just a matter of calling the static methods on the SerializationUtils class.Already, there are several other places in some other tools where I use JSON serialization this is coming in very handy. With a couple of lines of code I was able to add JSON.NET support to an older AJAX library that I use replacing quite a bit of code that was previously in use. And for any other manual JSON operations (in a couple of apps I use JSON Serialization for 'blob' like document storage) this is also going to be handy.Performance?Some of you might be thinking that using dynamic and Reflection can't be good for performance. And you'd be right… In performing some informal testing it looks like the performance of the native code is nearly twice as fast as the dynamic code. Most of the slowness is attributable to type lookups. To test I created a native class that uses an actual reference to JSON.NET and performance was consistently around 85-90% faster with the referenced code. That being said though - I serialized 10,000 objects in 80ms vs. 45ms so this isn't hardly slouchy. For the configuration component speed is not that important because both read and write operations typically happen once on first access and then every once in a while. But for other operations - say a serializer trying to handle AJAX requests on a Web Server one would be well served to create a hard dependency.Dynamic Loading - Worth it?On occasion dynamic loading makes sense. But there's a price to be paid in added code complexity and a performance hit. But for some operations that are not pivotal to a component or application and only used under certain circumstances dynamic loading can be beneficial to avoid having to ship extra files and loading down distributions. These days when you create new projects in Visual Studio with 30 assemblies before you even add your own code, trying to keep file counts under control seems a good idea. It's not the kind of thing you do on a regular basis, but when needed it can be a useful tool. Hopefully some of you find this information useful…© Rick Strahl, West Wind Technologies, 2005-2013Posted in .NET  C#   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• Izenda Reports 6.3 Top 10 Features

  - by gt0084e1

  Izenda 6.3 Top 10 New Features and Capabilities 1. Izenda Maps Add-On The Izenda Maps add-on allows rapid visualization of geographic or geo-spacial data.  It is fully integrated with the the rest of Izenda report package and adds a Maps tab which allows users to add interactive maps to their reports. Contact your representative or [email protected] for limited time discounts. Izenda Maps even has rich drill-down capabilities that allow you to dive deeper with a simple hover (also requires dashboards). 2. Streamlined Pie Charts with "Other" Slices The advanced properties of the Pie Chart now allows you to combine the smaller slices into a single "Other" slice. This reduces the visual complexity without throwing off the scale of the chart. Compare the difference below. 3. Combined Bar + Line Charts The Bar chart now allows dual visualization of multiple metrics simultaneously by adding a line for secondary data. Enabled via AdHocSettings.AllowLineOnBar = true; 4. Stacked Bar Charts The stacked bar chart lets you see a breakdown of a measure based on categorical data.  It is enabled with the following code. AdHocSettings.AllowStackedBarChart = true; 5. Self-Joining Data Sources The self-join features allows for parent-child relationships to be accessed from the Data Sources tab. The same table can be used as a secondary child table within the Report Designer. 6. Report Design From Dashboard View Dashboards now sport both view and design icons to allow quick access to both. 7. Field Arithmetic on Dates Differences between dates can now be used as measures with the arithmetic feature. 8. Simplified Multi-Tenancy Integrating with multi-tenant systems is now easier than ever. The following APIs have been added to facilitate common scenarios. AdHocSettings.CurrentUserTenantId = value; AdHocSettings.SchedulerTenantID = value; AdHocSettings.SchedulerTenantField = "AccountID"; 9. Support For SQL 2008 R2 and SQL Azure Izenda now supports the latest version of Microsoft's database as well as the SQL Azure service. 10. Enhanced Performance and Compatibility for Stored Procedures Izenda now supports more stored procedures than ever and runs them faster too.

  Read the article

• Cool Enhancements Everyone Can Enjoy

  - by Ruth

  With Release 17, we have a few visual and functional enhancements that make using CRM On Demand that much better for us all. I'll mention a few here, but to get the full outline of these upgrades, I recommend taking 10 minutes to view the Release 17 Usability Transfer of Information course. First and foremost, I find the ability to customize your theme (or skin) pretty cool, but I've said that before. Take a look at the Selecting Your Theme and the Themes - Create Your CRM Style blog articles for more information. My next favorite is the resizeable user interface (UI). CRM On Demand will dynamically fit the device and screen resolution you're using, which includes the resizing of fields, field editors and pop-ups. If you have a wide screen like me, you should appreciate that one very much. To make it easier to see that resized UI, the detail pages got a little face lift. New horizontal lines and other subtle changes make those pages easier to read. Also, those things you need to know, like error messages and inline help are highlighted with a little icon to show the message type. You may not think every change to the detail pages are particularly exciting, but I'm sure you'll enjoy the new Head Up Display, which saves you scrolling time by adding links to related information sections. I like that the head up display travels with me as I move up and down the page...it's like a little friend that takes me where I want to go as fast as possible. You may also really like the fact that the copy record feature is now available for all record types from both detail pages and lists. Your company administrator can choose which fields get copied, so you can maximize your efficiency when creating new records. Lists also got a face lift. Alternating colors in rows make it easier to see your data. Also, the Favorite Lists icon is now on the list itself, so you can save your most useful lists with one click. If you've ever tried to create a new list with 10 columns or more, you'll be happy to hear that the maximum number of columns in a list has increased from 9 to 20. This is great news, but doesn't mean you should include the kitchen sink in your list...excess columns can slow list performance. So choose your columns wisely. Again, these are just a few of my favorite things. Let us know what you think about the new usability features. What are your favorite things?

  Read the article

• Hierarchy flattening of interfaces in WCF

  - by nmarun

  Alright, so say I have my service contract interface as below: 1: [ServiceContract] 2: public interface ILearnWcfService 3: { 4: [OperationContract(Name = "AddInt")] 5: int Add(int arg1, int arg2); 6: } Say I decided to add another interface with a similar add “feature”. 1: [ServiceContract] 2: public interface ILearnWcfServiceExtend : ILearnWcfService 3: { 4: [OperationContract(Name = "AddDouble")] 5: double Add(double arg1, double arg2); 6: } My class implementing the ILearnWcfServiceExtend ends up as: 1: public class LearnWcfService : ILearnWcfServiceExtend 2: { 3: public int Add(int arg1, int arg2) 4: { 5: return arg1 + arg2; 6: } 7:  8: public double Add(double arg1, double arg2) 9: { 10: return arg1 + arg2; 11: } 12: } Now when I consume this service and look at the proxy that gets generated, here’s what I see: 1: public interface ILearnWcfServiceExtend 2: { 3: [System.ServiceModel.OperationContractAttribute(Action="http://tempuri.org/ILearnWcfService/AddInt", ReplyAction="http://tempuri.org/ILearnWcfService/AddIntResponse")] 4: int AddInt(int arg1, int arg2); 5: 6: [System.ServiceModel.OperationContractAttribute(Action="http://tempuri.org/ILearnWcfServiceExtend/AddDouble", ReplyAction="http://tempuri.org/ILearnWcfServiceExtend/AddDoubleResponse")] 7: double AddDouble(double arg1, double arg2); 8: } Only the ILearnWcfServiceExtend gets ‘listed’ in the proxy class and not the (base interface) ILearnWcfService interface. But then to uniquely identify the operations that the service exposes, the Action and ReplyAction properties are set. So in the above example, the AddInt operation has the Action property set to ‘http://tempuri.org/ILearnWcfService/AddInt’ and the AddDouble operation has the Action property of ‘http://tempuri.org/ILearnWcfServiceExtend/AddDouble’. Similarly the ReplyAction properties are set corresponding to the namespace that they’re declared in. The ‘http://tempuri.org’ is chosen as the default namespace, since the Namespace property on the ServiceContract is not defined. The other thing is the service contract itself – the Add() method. You’ll see that in both interfaces, the method names are the same. As you might know, this is not allowed in WSDL-based environments, even though the arguments are of different types. This is allowed only if the Name attribute of the ServiceContract is set (as done above). This causes a change in the name of the service contract itself in the proxy class. See that their names are changed to AddInt / AddDouble respectively. Lesson learned: The interface hierarchy gets ‘flattened’ when the WCF service proxy class gets generated.

  Read the article

• Free eBook with SQL Server performance tips and nuggets

  - by Claire Brooking

  I’ve often found that the kind of tips that turn out to be helpful are the ones that encourage me to make a small step outside of a routine. No dramatic changes – just a quick suggestion that changes an approach. As a languages student at university, one of the best I spotted came from outside the lecture halls and ended up saving me time (and lots of huffing and puffing) – the use of a rainbow of sticky notes for well-used pages and letter categories in my dictionary. Simple, but armed with a heavy dictionary that could double up as a step stool, those markers were surprisingly handy. When the Simple-Talk editors told me about a book they were planning that would give a series of tips for developers on how to improve database performance, we all agreed it needed to contain a good range of pointers for big-hitter performance topics. But we wanted to include some of the smaller, time-saving nuggets too. We hope we’ve struck a good balance. The 45 Database Performance Tips eBook covers different tips to help you avoid code that saps performance, whether that’s the ‘gotchas’ to be aware of when using Object to Relational Mapping (ORM) tools, or what to be aware of for indexes, database design, and T-SQL. The eBook is also available to download with SQL Prompt from Red Gate. We often hear that it’s the productivity-boosting side of SQL Prompt that makes it useful for everyday coding. So when a member of the SQL Prompt team mentioned an idea to make the most of tab history, a new feature in SQL Prompt 6 for SQL Server Management Studio, we were intrigued. Now SQL Prompt can save tabs we have been working on in SSMS as a way to maintain an active template for queries we often recycle. When we need to reuse the same code again, we search for our saved tab (and we can also customize its name to speed up the search) to get started. We hope you find the eBook helpful, and as always on Simple-Talk, we’d love to hear from you too. If you have a performance tip for SQL Server you’d like to share, email Melanie on the Simple-Talk team ([email protected]) and we’ll publish a collection in a follow-up post.

  Read the article

• Keeping up with New Releases

  - by Jeremy Smyth

  You can keep up with the latest developments in MySQL software in a number of ways, including various blogs and other channels. However, for the most correct (if somewhat dry and factual) information, you can go directly to the source.  Major Releases  For every major release, the MySQL docs team creates and maintains a "nutshell" page containing the significant changes in that release. For the current GA release (whatever that is) you'll find it at this location: https://dev.mysql.com/doc/mysql/en/mysql-nutshell.html  At the moment, this redirects to the summary notes for MySQL 5.6. The notes for MySQL 5.7 are also available at that website, at the URL http://dev.mysql.com/doc/refman/5.7/en/mysql-nutshell.html, and when eventually that version goes GA, it will become the currently linked notes from the URL shown above. Incremental Releases  For more detail on each incremental release, you can have a look at the release notes for each revision. For MySQL 5.6, the release notes are stored at the following location: http://dev.mysql.com/doc/relnotes/mysql/5.6/en/ At the time I write this, the topmost entry is a link for MySQL 5.6.15. Each linked page shows the changes in that particular version, so if you are currently running 5.6.11 and are interested in what bugs were fixed in versions since then, you can look at each subsequent release and see all changes in glorious detail. One really clever thing you can do with that site is do an advanced Google search to find exactly when a feature was released, and find out its release notes. By using the preceding link in a "site:" directive in Google, you can search only within those pages for an entry. For example, the following Google search shows pages within the release notes that reference the --slow-start-timeout option:     site:http://dev.mysql.com/doc/relnotes/mysql/ "--slow-start-timeout" By running that search, you can see that the option was added in MySQL 5.6.5 and also rolled into MySQL 5.5.20.   White Papers Also, with each major release you can usually find a white paper describing what's new in that release. In MySQL 5.6 there was a "What's new" whitepaper at this location: http://www.mysql.com/why-mysql/white-papers/whats-new-mysql-5-6/ You'll find other white papers at: http://www.mysql.com/why-mysql/white-papers/ Search the page for "5.6" to see any papers dealing specificallly with that version.

  Read the article

• Oracle releases new Java Embedded products

  - by Henrik Stahl

  With less than one week to go to JavaOne 2012, we've spiced things up a little by releasing not one but two net new embedded Java products. This is an important step towards realizing the vision of Java as the standard platform for the Internet of Things that I outlined in a recent blog post. The two new products are: Java ME Embedded 3.2. Based on same code as the widely deployed Oracle Java Wireless Client for feature phones, this new product provides a Java ME implementation optimized for very small microcontroller-based devices and adds - among other things - a new Device Access API that enables interaction with peripherals common in edge devices such as various types of sensors. In addition to the new Java ME Embedded platform, we have also released an update of the Java ME SDK which adds support for the development of small embedded devices. Java Embedded Suite 7.0. This is an integrated middleware stack for embedded devices, incorporating Java SE Embedded and versions of JavaDB, GlassFish and a Web Services stack optimized for remote operation and small footprint. A typical Internet of Things (or M2M) infrastructure contains three types of compute nodes: The edge device which is typically a sensor or control point of some kind. These devices can be connected directly to a backend through a mobile network if they are installed in - for example - a remote vending machine; or, they can be part of a local short-range network and be connected to the backend through a more powerful gateway device. A gateway is the second type of compute node and acts as an aggregator and control point for a local network. A good example of this could be a generalized home Internet access point, or home gateway. Gateways are mostly using normal wall power and are used for multiple applications, deployed by multiple service providers. Finally, the last type of compute node is the normal enterprise or cloud backend. Java ME Embedded and Java Embedded Suite are perfect base software stacks for the edge devices and the gateway respectively, providing the Java promise of a platform independent runtime and a complete set of libraries as well as allowing a programmer to focus on the business logic rather than plumbing. We are very thrilled with these new releases that open up exciting opportunities for Java developers to extend services and enterprise applications in ways that will make organizations more efficient and touch our daily lives. To find out more, come to the JavaOne conference (for technical content) and to the Java Embedded @ JavaOne subconference (for business content). There will be plenty of cool demos showing complete end-to-end applications, provided by Oracle and our partners, as well as keynotes and numerous sessions where you can learn more about the technology and business opportunities.

  Read the article

• Help for choosing a cost effective game server for Flash client

  - by Sapots Thomas

  I am developing a flash-based game primarily for desktops, to be hosted on facebook platform (like cityville, sims social etc). The gameplay doesn't involve real-time communication between players unlike an mmorpg. Here each player plays in his own world without any knowledge of other online players. I've written almost 95% of the game logic in actionscript on the client side. I used Smartfox Server pro on the server side (mostly used for getting data from the DB) and the entire server code is an extension written in java. I'm using json as the protocol for communication. Although I love smartfox server, as an indie, its tough for me to afford the unlimited users license. Morever its limited just to one machine. So I'm looking for an alternative to smartfox server now. The reason for choosing smartfox server earlier was to use the server properties supported by it. Server properties on smartfox server take advantage of the socket connection and are essentially server side objects in java which store some data for the player which he can change frequently during the game. And when he logs out of the game, the extension can write out the final state in the DB (I'm using MySQL). This significantly reduces the number of DB UPDATE/INSERT calls made during the game. I love the way this works since the data is secure as its on the server side and smartfox server is known to be scalable. (although I'm not sure whether this approach is used widely by gaming industry or not, since this is not an mmorpg, I'm putting all player in the lobby). So my question is whether any of the free and community supported servers like reddwarf, firebase, BlazeDS etc can provide a similar architecture so that I can use server properties without many code changes? EDIT : I am not insisting on the exact same feature (thats asking too much!), but atleast a viable messaging system on the server so that I can send actionscript objects from the client using json/binary so that its fast. OR maybe some completely different way to implement what I need here. Thanks in advance.

  Read the article

• Installed Ubuntu 14.04LTS

  - by user291729

  On my laptop which came pre-installed with Windows 8.1. Felt I needed to see the competition for myself to establish which was a better OS. So I followed the channels to dual boot. All seemed fine and I accessed Ubuntu with no issues after selecting this from the menu to select the OS. I should add that the boot method was changed to legacy. However, since using Ubuntu, I no longer have the ability to select the OS. The laptop simply logs straight into Ubuntu. I therefore attempted to access the recovery options, only it appears the Windows 8 bootloader has somehow been corrupted as I am now told to use the Windows 8 recovery disc (which, as this was pre-installed - I do not have). Left with no other alternative, I have scoured these forums without success, and so I am hoping someone in the know (or who has experienced similar) can help. I have tried boot repair again without success. On rebooting I am only presented with a basic splash screen asking me to select Ubuntu, Memtest, Windows 8 Recovery or Windows 8 Bootloader (The bootloaders again require I insert the disc). I have tried Code: cat /boot/grub/grub.cfg df -h sudo fdisk -l cat /proc/partitions # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi if [ "${next_entry}" ] ; then set default="${next_entry}" set next_entry= save_env next_entry set boot_once=true else set default="0" fi if [ x"${feature_menuentry_id}" = xy ]; then menuentry_id_option="--id" else menuentry_id_option="" fi export menuentry_id_option if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { if [ x$feature_all_video_module = xy ]; then insmod all_video else insmod efi_gop insmod efi_uga insmod ieee1275_fb insmod vbe insmod vga insmod video_bochs insmod video_cirrus fi } if [ x$feature_default_font_path = xy ] ; then font=unicode else insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi font="/usr/share/grub/unicode.pf2" fi if loadfont $font ; then set gfxmode=800x600 load_video insmod gfxterm set locale_dir=$prefix/locale set lang=en_GB insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ] ; then set timeout=-1 else if [ x$feature_timeout_style = xy ] ; then set timeout_style=menu set timeout=20 # Fallback normal timeout code in case the timeout_style feature is # unavailable. else set timeout=20 fi fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi linux /boot/vmlinuz-3.13.0-29-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro vga=789 quiet quiet splash $vt_handoff initrd /boot/initrd.img-3.13.0-29-generic } submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { menuentry 'Ubuntu, with Linux 3.13.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-29-generic-advanced-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-29-generic ...' linux /boot/vmlinuz-3.13.0-29-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro vga=789 quiet quiet splash $vt_handoff echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-29-generic } menuentry 'Ubuntu, with Linux 3.13.0-29-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-29-generic-recovery-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-29-generic ...' linux /boot/vmlinuz-3.13.0-29-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro recovery nomodeset vga=789 quiet echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-29-generic } menuentry 'Ubuntu, with Linux 3.13.0-24-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-advanced-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-24-generic ...' linux /boot/vmlinuz-3.13.0-24-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro vga=789 quiet quiet splash $vt_handoff echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-24-generic } menuentry 'Ubuntu, with Linux 3.13.0-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-recovery-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-24-generic ...' linux /boot/vmlinuz-3.13.0-24-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro recovery nomodeset vga=789 quiet echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-24-generic } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry 'Memory test (memtest86+)' { insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi knetbsd /boot/memtest86+.elf } menuentry 'Memory test (memtest86+, serial console 115200)' { insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry 'Windows Recovery Environment (loader) (on /dev/sda2)' --class windows --class os $menuentry_id_option 'osprober-chain-7A6A69D66A698FA5' { insmod part_gpt insmod ntfs set root='hd0,gpt2' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 7A6A69D66A698FA5 else search --no-floppy --fs-uuid --set=root 7A6A69D66A698FA5 fi drivemap -s (hd0) ${root} chainloader +1 } menuentry 'Windows 8 (loader) (on /dev/sda3)' --class windows --class os $menuentry_id_option 'osprober-chain-8C88-80F7' { insmod part_gpt insmod fat set root='hd0,gpt3' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt3 --hint-efi=hd0,gpt3 --hint-baremetal=ahci0,gpt3 8C88-80F7 else search --no-floppy --fs-uuid --set=root 8C88-80F7 fi drivemap -s (hd0) ${root} chainloader +1 } set timeout_style=menu if [ "${timeout}" = 0 ]; then set timeout=10 fi ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/30_uefi-firmware ### ### END /etc/grub.d/30_uefi-firmware ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f ${config_directory}/custom.cfg ]; then source ${config_directory}/custom.cfg elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi if [ "${next_entry}" ] ; then set default="${next_entry}" set next_entry= save_env next_entry set boot_once=true else set default="0" fi if [ x"${feature_menuentry_id}" = xy ]; then menuentry_id_option="--id" else menuentry_id_option="" fi export menuentry_id_option if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { if [ x$feature_all_video_module = xy ]; then insmod all_video else insmod efi_gop insmod efi_uga insmod ieee1275_fb insmod vbe insmod vga insmod video_bochs insmod video_cirrus fi } if [ x$feature_default_font_path = xy ] ; then font=unicode else insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi font="/usr/share/grub/unicode.pf2" fi if loadfont $font ; then set gfxmode=800x600 load_video insmod gfxterm set locale_dir=$prefix/locale set lang=en_GB insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ] ; then set timeout=-1 else if [ x$feature_timeout_style = xy ] ; then set timeout_style=menu set timeout=20 # Fallback normal timeout code in case the timeout_style feature is # unavailable. else set timeout=20 fi fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi linux /boot/vmlinuz-3.13.0-29-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro vga=789 quiet quiet splash $vt_handoff initrd /boot/initrd.img-3.13.0-29-generic } submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { menuentry 'Ubuntu, with Linux 3.13.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-29-generic-advanced-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-29-generic ...' linux /boot/vmlinuz-3.13.0-29-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro vga=789 quiet quiet splash $vt_handoff echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-29-generic } menuentry 'Ubuntu, with Linux 3.13.0-29-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-29-generic-recovery-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-29-generic ...' linux /boot/vmlinuz-3.13.0-29-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro recovery nomodeset vga=789 quiet echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-29-generic } menuentry 'Ubuntu, with Linux 3.13.0-24-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-advanced-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-24-generic ...' linux /boot/vmlinuz-3.13.0-24-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro vga=789 quiet quiet splash $vt_handoff echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-24-generic } menuentry 'Ubuntu, with Linux 3.13.0-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-recovery-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-24-generic ...' linux /boot/vmlinuz-3.13.0-24-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro recovery nomodeset vga=789 quiet echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-24-generic } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry 'Memory test (memtest86+)' { insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi knetbsd /boot/memtest86+.elf } menuentry 'Memory test (memtest86+, serial console 115200)' { insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry 'Windows Recovery Environment (loader) (on /dev/sda2)' --class windows --class os $menuentry_id_option 'osprober-chain-7A6A69D66A698FA5' { insmod part_gpt insmod ntfs set root='hd0,gpt2' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 7A6A69D66A698FA5 else search --no-floppy --fs-uuid --set=root 7A6A69D66A698FA5 fi drivemap -s (hd0) ${root} chainloader +1 } menuentry 'Windows 8 (loader) (on /dev/sda3)' --class windows --class os $menuentry_id_option 'osprober-chain-8C88-80F7' { insmod part_gpt insmod fat set root='hd0,gpt3' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt3 --hint-efi=hd0,gpt3 --hint-baremetal=ahci0,gpt3 8C88-80F7 else search --no-floppy --fs-uuid --set=root 8C88-80F7 fi drivemap -s (hd0) ${root} chainloader +1 } set timeout_style=menu if [ "${timeout}" = 0 ]; then set timeout=10 fi ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/30_uefi-firmware ### ### END /etc/grub.d/30_uefi-firmware ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f ${config_directory}/custom.cfg ]; then source ${config_directory}/custom.cfg elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### john@john-SVE1713Y1EB:~$ ^C john@john-SVE1713Y1EB:~$ ^C john@john-SVE1713Y1EB:~$ df -h Filesystem Size Used Avail Use% Mounted on /dev/sda9 84G 7.1G 73G 9% / none 4.0K 0 4.0K 0% /sys/fs/cgroup udev 3.9G 4.0K 3.9G 1% /dev tmpfs 794M 1.4M 793M 1% /run none 5.0M 0 5.0M 0% /run/lock none 3.9G 80K 3.9G 1% /run/shm none 100M 52K 100M 1% /run/user /dev/sdc1 7.5G 2.2G 5.4G 29% /media/john/DYLANMUSIC /dev/sr0 964M 964M 0 100% /media/john/Ubuntu 14.04 LTS amd64 /dev/sdb1 1.9T 892G 972G 48% /media/john/Storage Main WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x4e2ccf75 Device Boot Start End Blocks Id System /dev/sda1 1 1953525167 976762583+ ee GPT Partition 1 does not start on physical sector boundary. Disk /dev/sdc: 8011 MB, 8011120640 bytes 41 heads, 41 sectors/track, 9307 cylinders, total 15646720 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc3072e18 Device Boot Start End Blocks Id System /dev/sdc1 8064 15646719 7819328 b W95 FAT32 Disk /dev/sdb: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc7d968ff Device Boot Start End Blocks Id System /dev/sdb1 64 3907029119 1953514528 7 HPFS/NTFS/exFAT major minor #blocks name 8 0 976762584 sda 8 1 266240 sda1 8 2 1509376 sda2 8 3 266240 sda3 8 4 131072 sda4 8 5 841012780 sda5 8 6 358400 sda6 8 7 35376128 sda7 8 8 1024 sda8 8 9 89501696 sda9 8 10 8337408 sda10 11 0 987136 sr0 8 32 7823360 sdc 8 33 7819328 sdc1 8 16 1953514584 sdb 8 17 1953514528 sdb1 I am no expert on this and I'm at a loss as how to correct this without having to re-format everything and reinstall Windows 8. However, if I'm to try using Ubuntu again then there is the risk this problem may come back. Again, I did not do anything manually - the installer did everything (with the exception of changing the boot to Legacy to allow the booting of another bootloader). LiveCD works but doesn't give me the options that I've seen here and as mentioned earlier, only boot recovery only gives me the options as mentioned earlier. Also this fails to load via USB (possibly because HDD comes before USB in the boot order?). Being used to a Windows environment, the Ubuntu (and Linux) environment is a dive at a less than comfortable depth at present (but one I fully intend to get to grips with - especially the commands being more common via Terminal). I very much appreciate the help with this guys.

  Read the article

• MySQL for Excel 1.1.3 has been released

  - by Javier Treviño

  The MySQL Windows Experience Team is proud to announce the release of MySQL for Excel version 1.1.3, the  latest addition to the MySQL Installer for Windows. MySQL for Excel is an application plug-in enabling data analysts to very easily access and manipulate MySQL data within Microsoft Excel. It enables you to directly work with a MySQL database from within Microsoft Excel so you can easily do tasks such as: Importing MySQL Data into Excel Exporting Excel data directly into MySQL to a new or existing table Editing MySQL data directly within Excel MySQL for Excel is installed using the MySQL Installer for Windows. The MySQL installer comes in 2 versions   Full (150 MB) which includes a complete set of MySQL products with their binaries included in the download Web (1.5 MB - a network install) which will just pull MySQL for Excel over the web and install it when run.   You can download MySQL Installer from our official Downloads page at http://dev.mysql.com/downloads/installer/. MySQL for Excel 1.1.3 introduces the following features:   Upon saving a Workbook containing Worksheets in Edit Mode, the user is asked if he wants to exit the Edit Mode on all Worksheets before their parent Workbook is saved so the Worksheets are saved unprotected, otherwise the Worksheets will remain protected and the users will be able to unprotect them later retrieving the passkeys from the application log after closing MySQL for Excel. Added background coloring to the column names header row of an Import Data operation to have the same look as the one in an Edit Data operation (i.e. gray-ish background). Connection passwords can be stored securely just like MySQL Workbench does and these secured passwords are shared with Workbench in the same way connections are. Changed the way the MySQL for Excel ribbon toggle button works, instead of just showing or hiding the add-in it actually opens and closes it. Added a connection test before any operation against the database (schema creation, data import, append, export or edition) so the operation dialog is not shown and a friendlier error message is shown.   Also this release contains the following bug fixes:   Added a check on every connection test for an expired password, if the password has been expired a dialog is now shown to the user to reset the password. Bug #17354118 - DON'T HANDLE EXPIRED PASSWORDS Added code to escape text values to be imported to an Excel worksheet that start with an equals sign so Excel does not treat those values as formulas that will fail evaluation. This is an option turned on by default that can be turned off by users if they wish to import values to be treated as Excel formulas. Bug #17354102 - ERROR IMPORTING TEXT VALUES TO EXCEL STARTING WITH AN EQUALS SIGN Added code to properly check the reason for a failing connection, if it's a failing password the user gets a dialog to retry the connection with a different password until the connection succeeds, a connection error not related to the password is thrown or the user cancels. If the failing connection is not related to a bad password an error message is shown to the users indicating the reason of the failure. Bug #16239007 - CONNECTIONS TO MYSQL SERVICES NOT RUNNING DISPLAY A WRONG PASSWORD ERROR MESSAGE Added global options dialog that can be accessed from the Schema Selection and DB Object Selection panels where the timeouts for the connection to the DB Server and for the query commands can be changed from their default values (15 seconds for the connection timeout and 30 seconds for the query timeout). MySQL Bug #68732, Bug #17191646 - QUERY TIMEOUT CANNOT BE ADJUSTED IN MYSQL FOR EXCEL Changed the Varchar(65,535) data type shown in the Export Data data type combo box to Text since the maximum row size is 65,535 bytes and any autodetected column data type with a length greater than 4,000 should be set to Text actually for the table to be created successfully. MySQL Bug #69779, Bug #17191633 - EXPORT FAILS FOR EXCEL FILES CONTAINING > 4000 CHARACTERS OF TEXT PER CELL Removed code that was replacing all spaces typed by the user in an overriden data type for a new column in an Export Data operation, also improved the data type detection code to flag as invalid data types with parenthesis but without any text inside or where the contents inside the parenthesis are not valid for the specific data type. Bug #17260260 - EXPORT DATA SET TYPE NOT WORKING WITH MEMBER VALUES CONTAINING SPACES Added support for the year data type with a length of 2 or 4 and a validation that valid values are integers between 1901-2155 (for 4-digit years) or between 0-99 (for 2-digit years). Bug #17259915 - EXPORT DATA YEAR DATA TYPE NOT RECOGNIZED IF DECLARED WITH A DISPLAY WIDTH) Fixed code for Export Data operations where users overrode the data type for columns typing Text in the data type combobox, which is a valid data type but was not recognized as such. Bug #17259490 - EXPORT DATA TEXT DATA TYPE NOT RECOGNIZED AS A VALID DATA TYPE Changed the location of the registry where the MySQL for Excel add-in is installed to HKEY_LOCAL_MACHINE instead of HKEY_CURRENT_USER so the add-in is accessible by all users and not only to the user that installed it. For this to work with Excel 2007 a hotfix may be required (see http://support.microsoft.com/kb/976477). MySQL Bug #68746, Bug #16675992 - EXCEL-ADD-IN IS ONLY INSTALLED FOR USER ACCOUNT THAT THE INSTALLATION RUNS UNDER Added support for Excel 2013 Single Document Interface, now that Excel 2013 creates 1 window per workbook also the Excel Add-In maintains an independent custom task pane in each window. MySQL Bug #68792, Bug #17272087 - MYSQL FOR EXCEL SIDEBAR DOES NOT APPEAR IN EXCEL 2013 (WITH WORKAROUND) Included the latest MySQL Utility with a code fix for the COM exception thrown when attempting to open Workbench in the Manage Connections window. Bug #17258966 - MYSQL WORKBENCH NOT OPENED BY CLICKING MANAGE CONNECTIONS HOTLABEL Fixed code for Append Data operations that was not applying a calculated automatic mapping correctly when the source and target tables had different number of columns, some columns with the same name but some of those lying on column indexes beyond the limit of the other source/target table. MySQL Bug #69220, Bug #17278349 - APPEND DOESN'T AUTOMATICALLY DETECT EXCEL COL HEADER WITH SAME NAME AS SQL FIELD Fixed some code for Edit Data operations that was escaping special characters twice (during edition in Excel and then upon sending the query to the MySQL server). MySQL Bug #68669, Bug #17271693 - A BACKSLASH IS INSERTED BEFORE AN APOSTROPHE EDITING TABLE WITH MYSQL FOR EXCEL Upgraded MySQL Utility with latest version that encapsulates dialog base classes and introduces more classes to handle Workbench connections, and removed these from the Excel project. Bug #16500331 - CAN'T DELETE CONNECTIONS CREATED WITHIN ADDIN You can access the MySQL for Excel documentation at http://dev.mysql.com/doc/refman/5.6/en/mysql-for-excel.html You can find our team’s blog at http://blogs.oracle.com/MySQLOnWindows. You can also post questions on our MySQL for Excel forum found at http://forums.mysql.com/. Enjoy and thanks for the support!

  Read the article

• Java Spotlight Episode 78: Jasper Potts on the JavaFX Scene Builder

  - by Roger Brinkley

  Tweet An interview with Jasper Potts about the new JavaFX Scene Builder. Joining us this week on the Java All Star Developer Panel are Dalibor Topic, Java Free and Open Source Software Ambassador and Arun Gupta, Java EE Guy. Right-click or Control-click to download this MP3 file. You can also subscribe to the Java Spotlight Podcast Feed to get the latest podcast automatically. If you use iTunes you can open iTunes and subscribe with this link:  Java Spotlight Podcast in iTunes. Show Notes News JavaFX Scene Builder Developer Preview available for testing. Java EE Unlock the Java EE 6 Platform using NetBeans 7.1 Tuning GlassFish for Production JSF 2.2 Update from Ed Burns John Rose at Microsoft's Lang.NEXT summit Recording of John's Java 8 presentation Jeroen Frijters' presentation on IKVM.NET Martin Odersky's keynote JVM Language Summit 2012 July 30 – August 1; Oracle Santa Clara (same as last year) CFP coming in a few days JVM Language Summit 2011 Presentations & Recordings Proposed development schedule for JDK 8 Say hello to Mathias Axelsson Events April 11, Cleveland JUG, Cleveland, OH April 12, GreenJUG, Greenville, SC April 17-18, JavaOne Russia, Moscow Russia April 18–20, Devoxx France, Paris, France April 17-20, GIDS, Bangalore April 21, Java Summit, Chennai April 26, Mix-IT, Lyon, France, May 3-4, JavaOne India, Hyderabad, India May 5, Bangalore, Pune, ?? - JUG outreach May 7, OTN Developer Day, Mumbai May 8, OTN Developer Day, Delhi Feature InterviewJasper Potts is the Developer Experience Architect for the Java Client Group at Oracle. Responsible for technical design for everything thats sis on the core platform including Controls, Tools, Samples and Blueprints. Formally a lead engineer on the JavaFX & Swing teams working on the new JavaFX UI Controls and Graphics frameworks. Also responsible for designing, developing and presenting demos during the keynotes at JavaOne and Devoxx. A JavaOne Rockstar presenter having presented many sessions on JavaFX and Swing at many conferences. Prior to Sun he founded Xerto a desktop applications company developing Imagery a Java professional photo management application. In this interview Jasper talks about the recently release JavaFX Scene Builder. Mail Bag What’s Cool Contribute to GlassFish in Five Different Ways Stephen Chin and James Weaver join Oracle Adam Bien - Building Java FX 2 Libraries From Source With Maven 3 Paul Sandoz - Java Boomerang Building Jigsaw on Mac OS X using VirtualBox Mandy Chung: Jigsaw for Mac OS X

  Read the article

• SSIS Expression Editor & Tester

  Published today on CodePlex is the SSIS Expression Editor & Tester project. If you want to try it just pop over to CodePlex and download it. About five years ago I developed my own expression editor control. It first got used in our custom tasks as the MS editor didn’t become available until SQL 2005 SP1, but even then it had some handy features I preferred. For example resizable panes so that if your expression result was more than two lines you could see them all. It also meant I could change the functions available in the tree view, the most obvious use being to add some handy snippets and samples that I used a lot. This quickly developed into a small expression testing tool. I’d develop complex expressions using my editor and then copy it back into the package itself. I have been meaning to make the tool available for some time and finally made the effort, the code is checked-in and the signed downloads are published on CodePlex. There are two flavours, SQL 2005 or 2008, and just a simple zip file to download and extract. The tool doesn’t need installing, and is completely portable. It does need SSIS to be installed on the local machine though. Each zip file contains two files: ExpressionTester.exe – The tool itself, run this. ExpressionEditor.dll – The reusable editor control. A while ago the gentlemen behind BIDS Helper noticed the editor on a task and asked about using it. This became incorporated into their variable window extensions feature. To try and help them and anyone else that wants to use the editor control, it is available as a single assembly that you can reference yourself, and of course all the source code is on CodePlex too. Just add a reference to the ExpressionEditor.dll assembly and you should be up and running in no time. There is a sample project Package Test in the source code which shows how to use the editor control form in it’s simplest form, or if you want to host control directly then the tester tool is a perfect example.

  Read the article

• No GLX on Intel card with multiseat with additional nVidia card

  - by MeanEYE

  I have multiseat configured and my Xorg has 2 server layouts. One is for nVidia card and other is for Intel card. They both work, but display server assigned to Intel card doesn't have hardware acceleration since DRI and GLX module being used is from nVidia driver. So my question is, can I configure layouts somehow to use right DRI and GLX with each card? My Xorg.conf: Section "ServerLayout" Identifier "Default" Screen 0 "Screen0" 0 0 Option "Xinerama" "0" EndSection Section "ServerLayout" Identifier "TV" Screen 0 "Screen1" 0 0 Option "Xinerama" "0" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL E198WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Unknown" Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 610" EndSection Section "Device" Identifier "Device1" Driver "intel" BusID "PCI:0:2:0" Option "AccelMethod" "uxa" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "Stereo" "0" Option "nvidiaXineramaInfoOrder" "DFP-1" Option "metamodes" "DFP-0: nvidia-auto-select +1440+0, DFP-1: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Log file for Intel: [ 18.239] X.Org X Server 1.13.0 Release Date: 2012-09-05 [ 18.239] X Protocol Version 11, Revision 0 [ 18.239] Build Operating System: Linux 2.6.24-32-xen x86_64 Ubuntu [ 18.239] Current Operating System: Linux bytewiper 3.5.0-18-generic #29-Ubuntu SMP Fri Oct 19 10:26:51 UTC 2012 x86_64 [ 18.239] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-18-generic root=UUID=fc0616fd-f212-4846-9241-ba4a492f0513 ro quiet splash [ 18.239] Build Date: 20 September 2012 11:55:20AM [ 18.239] xorg-server 2:1.13.0+git20120920.70e57668-0ubuntu0ricotz (For technical support please see http://www.ubuntu.com/support) [ 18.239] Current version of pixman: 0.26.0 [ 18.239] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 18.239] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 18.239] (==) Log file: "/var/log/Xorg.1.log", Time: Wed Nov 21 18:32:14 2012 [ 18.239] (==) Using config file: "/etc/X11/xorg.conf" [ 18.239] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 18.239] (++) ServerLayout "TV" [ 18.239] (**) |-->Screen "Screen1" (0) [ 18.239] (**) | |-->Monitor "Monitor1" [ 18.240] (**) | |-->Device "Device1" [ 18.240] (**) Option "Xinerama" "0" [ 18.240] (==) Automatically adding devices [ 18.240] (==) Automatically enabling devices [ 18.240] (==) Automatically adding GPU devices [ 18.240] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, built-ins [ 18.240] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" [ 18.240] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 18.240] (II) Loader magic: 0x7f6917944c40 [ 18.240] (II) Module ABI versions: [ 18.240] X.Org ANSI C Emulation: 0.4 [ 18.240] X.Org Video Driver: 13.0 [ 18.240] X.Org XInput driver : 18.0 [ 18.240] X.Org Server Extension : 7.0 [ 18.240] (II) config/udev: Adding drm device (/dev/dri/card0) [ 18.241] (--) PCI: (0:0:2:0) 8086:0152:1043:84ca rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64 [ 18.241] (--) PCI:*(0:1:0:0) 10de:104a:1458:3546 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/134217728, 0xe8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288 [ 18.241] (II) Open ACPI successful (/var/run/acpid.socket) [ 18.241] Initializing built-in extension Generic Event Extension [ 18.241] Initializing built-in extension SHAPE [ 18.241] Initializing built-in extension MIT-SHM [ 18.241] Initializing built-in extension XInputExtension [ 18.241] Initializing built-in extension XTEST [ 18.241] Initializing built-in extension BIG-REQUESTS [ 18.241] Initializing built-in extension SYNC [ 18.241] Initializing built-in extension XKEYBOARD [ 18.241] Initializing built-in extension XC-MISC [ 18.241] Initializing built-in extension SECURITY [ 18.241] Initializing built-in extension XINERAMA [ 18.241] Initializing built-in extension XFIXES [ 18.241] Initializing built-in extension RENDER [ 18.241] Initializing built-in extension RANDR [ 18.241] Initializing built-in extension COMPOSITE [ 18.241] Initializing built-in extension DAMAGE [ 18.241] Initializing built-in extension MIT-SCREEN-SAVER [ 18.241] Initializing built-in extension DOUBLE-BUFFER [ 18.241] Initializing built-in extension RECORD [ 18.241] Initializing built-in extension DPMS [ 18.241] Initializing built-in extension X-Resource [ 18.241] Initializing built-in extension XVideo [ 18.241] Initializing built-in extension XVideo-MotionCompensation [ 18.241] Initializing built-in extension XFree86-VidModeExtension [ 18.241] Initializing built-in extension XFree86-DGA [ 18.241] Initializing built-in extension XFree86-DRI [ 18.241] Initializing built-in extension DRI2 [ 18.241] (II) LoadModule: "glx" [ 18.241] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so [ 18.247] (II) Module glx: vendor="NVIDIA Corporation" [ 18.247] compiled for 4.0.2, module version = 1.0.0 [ 18.247] Module class: X.Org Server Extension [ 18.247] (II) NVIDIA GLX Module 310.19 Thu Nov 8 01:12:43 PST 2012 [ 18.247] Loading extension GLX [ 18.247] (II) LoadModule: "intel" [ 18.248] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 18.248] (II) Module intel: vendor="X.Org Foundation" [ 18.248] compiled for 1.13.0, module version = 2.20.13 [ 18.248] Module class: X.Org Video Driver [ 18.248] ABI class: X.Org Video Driver, version 13.0 [ 18.248] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge Desktop (GT1), Sandybridge Desktop (GT2), Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1), Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+), Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2), Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server, Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2), Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2), Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2), Haswell Server (GT2+), Haswell SDV Desktop (GT1), Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+), Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2), Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1), Haswell SDV Server (GT2), Haswell SDV Server (GT2+), Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2), Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1), Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+), Haswell ULT Server (GT1), Haswell ULT Server (GT2), Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1), Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+), Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2), Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1), Haswell CRW Server (GT2), Haswell CRW Server (GT2+), ValleyView PO board [ 18.248] (++) using VT number 8 [ 18.593] (II) intel(0): using device path '/dev/dri/card0' [ 18.593] (**) intel(0): Depth 24, (--) framebuffer bpp 32 [ 18.593] (==) intel(0): RGB weight 888 [ 18.593] (==) intel(0): Default visual is TrueColor [ 18.593] (**) intel(0): Option "AccelMethod" "uxa" [ 18.593] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Desktop (GT1) [ 18.593] (**) intel(0): Relaxed fencing enabled [ 18.593] (**) intel(0): Wait on SwapBuffers? enabled [ 18.593] (**) intel(0): Triple buffering? enabled [ 18.593] (**) intel(0): Framebuffer tiled [ 18.593] (**) intel(0): Pixmaps tiled [ 18.593] (**) intel(0): 3D buffers tiled [ 18.593] (**) intel(0): SwapBuffers wait enabled ... [ 20.312] (II) Module fb: vendor="X.Org Foundation" [ 20.312] compiled for 1.13.0, module version = 1.0.0 [ 20.312] ABI class: X.Org ANSI C Emulation, version 0.4 [ 20.312] (II) Loading sub module "dri2" [ 20.312] (II) LoadModule: "dri2" [ 20.312] (II) Module "dri2" already built-in [ 20.312] (==) Depth 24 pixmap format is 32 bpp [ 20.312] (II) intel(0): [DRI2] Setup complete [ 20.312] (II) intel(0): [DRI2] DRI driver: i965 [ 20.312] (II) intel(0): Allocated new frame buffer 1920x1080 stride 7680, tiled [ 20.312] (II) UXA(0): Driver registered support for the following operations: [ 20.312] (II) solid [ 20.312] (II) copy [ 20.312] (II) composite (RENDER acceleration) [ 20.312] (II) put_image [ 20.312] (II) get_image [ 20.312] (==) intel(0): Backing store disabled [ 20.312] (==) intel(0): Silken mouse enabled [ 20.312] (II) intel(0): Initializing HW Cursor [ 20.312] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 20.313] (**) intel(0): DPMS enabled [ 20.313] (==) intel(0): Intel XvMC decoder enabled [ 20.313] (II) intel(0): Set up textured video [ 20.313] (II) intel(0): [XvMC] xvmc_vld driver initialized. [ 20.313] (II) intel(0): direct rendering: DRI2 Enabled [ 20.313] (==) intel(0): hotplug detection: "enabled" [ 20.332] (--) RandR disabled [ 20.335] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found) [ 20.335] (II) intel(0): Setting screen physical size to 508 x 285 [ 20.338] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm [ 20.340] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 20.340] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 20.340] (II) LoadModule: "evdev" [ 20.340] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so

  Read the article

• CodePlex Daily Summary for Friday, August 22, 2014

  CodePlex Daily Summary for Friday, August 22, 2014Popular ReleasesQuickMon: Version 3.22: This release add two important changes. 1. Config variables at the monitor pack level (global to entire monitor pack for all Collectors) 2. The QuickMon (Windows) service now automatically reloads monitor packs that have been changed since it was started. This means you don't have to restart the service for changes to take effect.SSIS ReportGeneratorTask: ReportGenerator Task 1.8: New version of the SSIS Report Generator Task that supports SQL Server 2008, 2012 and 2014. In addition to minor bug fixes Multi-Value Parameters and Execution Information were integrated. The complete variable and parameter assignment is now a string and can be set dynamically.Corefig for Windows Server 2012 Core and Hyper-V Server 2012: Corefig 1.1.2 ISO: FixesUpdated Hyper-V scripts to use version 2 of the WMI tree. Updated the Hyper-V check for saved VM to look for the proper identifier. Fixed text issues with the licensing tab (thanks to briangw for rooting this problem out). EnhancementsNew (and improved) version number in Corefig.psd1.Outlook 2013 Backup Add-In: Outlook Backup Add-In 1.3: Changelog for new version: Added button in config-window to reset the last backup-time (this will trigger the backup after closing outlook) Minimum interval set to 0 (backup at each closing of outlook) Catch exception when data store entry is corrupt Added two parameters (prefix and suffix) to automatically rename the backup file Updated VSTO-Runtime to 10.0.50325 Upgraded project to Visual Studio 2013 Added optional command to run after backup (e.g. pack backup files, ...) Add...babelua: 1.6.7.0: V1.6.7.0 - 2014.8.21New feature: add a file search window ( ctrl+1 or ALT+L ), like The file search in VC Assistant; Stability improvement: performance improvement when BabeLua load/unload; performance improvement when debugger load lua files;File Explorer for WPF: FileExplorer3_20August2014: Please see Aug14 Update.Open NFe: RDI Open NFe 3.0 (alpha): Atualização para o layout 3.10 da NFe.ODBC Connect: v1.0: ODBC Connect executables for both 32bit and 64bit ODBC data sourcesMSSQL Deployment Tool: Microsoft SQL Deploy Tool v1.3.1: MicrosoftSqlDeployTool: v1.3.1.38348 What's changed? Update namespace and assembly name. Bug fixing.SharePoint 2013 Search Query Tool: SharePoint 2013 Search Query Tool v2.1: Layout improvements Bug fixes Stores auth method and user name Moved experimental settings to Advanced boxCtrlAltStudio Viewer: CtrlAltStudio Viewer 1.2.2.41183 Alpha: This alpha of the CtrlAltStudio Viewer provides some preliminary Oculus Rift DK2 support. For more details, see the release notes linked to below. Release notes: http://ctrlaltstudio.com/viewer/release-notes/1-2-2-41183-alpha Support info: http://ctrlaltstudio.com/viewer/support Privacy policy: http://ctrlaltstudio.com/viewer/privacy Disclaimer: This software is not provided or supported by Linden Lab, the makers of Second Life.HDD Guardian: HDD Guardian 0.6.1: New: package now include smartctl 6.3; Removed: standard notification e-mail. Now you have to set your mail server to send e-mail alerts; Bugfix: USB detection error; custom e-mail server settings issue; bottom panel displays a wrong ATA error count.VG-Ripper & PG-Ripper: VG-Ripper 2.9.62: changes NEW: Added Support for 'MadImage.org' links NEW: Added Support for 'ImgSpot.org' links NEW: Added Support for 'ImgClick.net' links NEW: Added Support for 'Imaaage.com' links NEW: Added Support for 'Image-Bugs.com' links NEW: Added Support for 'Pictomania.org' links NEW: Added Support for 'ImgDap.com' links NEW: Added Support for 'FileSpit.com' links FIXED: 'ImgSee.me' linksMagick.NET: Magick.NET 7.0.0.0001: Magick.NET linked with ImageMagick 7-Beta.CMake Tools for Visual Studio: CMake Tools for Visual Studio 1.2: This release adds the following new features and bug fixes from CMake Tools for Visual Studio 1.1: Added support for CMake 3.0. Added support for word completion. Added IntelliSense support for the CMAKEHOSTSYSTEM_INFORMATION command. Fixed syntax highlighting for tokens beginning with escape sequences. Fixed issue uninstalling CMake Tools for Visual Studio after Visual Studio has been uninstalled.GW2 Personal Assistant Overlay: GW2 Personal Assistant Overlay 1.1: Overview1.1 is the second 'stable' release of the GW2 Personal Assistant Overlay. This version includes just a couple of very minor features and some minor bug fixes. For details regarding installation, setup, and general use, see Documentation. Note: If you were using a previous version, you will probably want to copy over the following user settings files: GW2PAO.DungeonSettings.xml GW2PAO.EventSettings.xml GW2PAO.WvWSettings.xml GW2PAO.ZoneCompletionSettings.xml New FeaturesAdded new "No...Fluentx: Fluentx v1.5.3: Added few more extension methods.fastJSON: v2.1.2: 2.1.2 - bug fix circular referencesJPush.NET: JPush Server SDK 1.2.1 (For JPush V3): Assembly: 1.2.1.24728 JPush REST API Version: v3 JPush Documentation Reference .NET framework: v4.0 or above. Sample: class: JPushClientV3 2014 Augest 15th.SEToolbox: SEToolbox 01.043.008 Release 1: Changed ship/station names to use new DisplayName instead of Beacon/Antenna. Fixed issue with updated SE binaries 01.043.018 using new Voxel Material definitions.New Projects1thManage: GDT for erevery oneCreateProjectOnCodePlex: This is the first project for CoderCamps.HEAD FIRST C# LAB 1 : A DAY AT THE RACES: This has been provided for educational purposes and general discussion to improve coding practices associated with the resources detailed within Head First C#.Introduce Audit logging to your EF application using Repository & Unit of Work: Introduce Auditing in your application that uses Entity Framework by utilizing the Repository and Unit of Work design patterns.License Registration (C++): Allow to create demo version, activate or not a module.MS Word SharepointWiki Plugin: Scope of the Plugin is to enable a Post to a Sharepoint Wiki from within MS Word with Formatted Text and Images.Send My Zip: This app will help you to send the files were zipped then send the email about password information. This project is currently in setup mode and only availablewinhttp: this is a project for http/https download.Wix Builder: WixBuilder focusses on easily generating a WiX script from a project ouput, compile and link it into msi installer using the WiX Toolset.XiamiSig: ????????。

  Read the article

• How To Build An Enterprise Application - Introduction

  - by Tuan Nguyen

  An enterprise application is a software which fulfills 4 core quality attributes: Reliability Flexibility Reusability Maintainability Reliability is the ability of a system or component to perform its required functions under stated conditions for a specific period of time. Because there are no ways more than testing to make sure a system is reliability, we can exchange the term reliability with the term testability. Flexibility is the ability of changing a system's core features without violating unrelated features or components. Although flexibility can helps us to achieve interoperability easily but the opposite is not true. For example, a program might run on multiple platforms, contains logic for many scenarios but that wouldn't mean it was flexibility if it forces us rewrite code in all components when we just want to change some aspects of a feature it had. Reusability is the ability of sharing one or more system's components for another system. We should just open a component's reusability in the context in which it is used. For example, we write classes that implement UI logic and deliver them to only classes which implementing UI. Maintainability is the ability of adding or removing features to a system after it was released. Maintainability consists of many factors such as readability, analyzability, extensibility therein extensibility is critical. Maintainability requires us to write code that is longer and complexer than normal but it doesn't mean we introduce unneccessarily complex code. We always try to make our code clear and transparent to everyone. An application enterprise is built on an enterprise design which consists of two parts: low-level design and high-level design. At low-level design, it focuses on building loose-coupled classes or components. Particularly, it recommends: Each class or component undertakes only single responsibility (design based on unit test) Classes or components implement and work through interfaces (design based on contract) Dependency relationship between classes and components could be injected at run-time (design based on dependency) At high-level design, it focuses on architecting system into tiers and layers. Particularly, it recommends: Divide system into subsystems for deployment. Each subsytem is called a tier. Typical, an enterprise application would have 3 tiers as illustrated in the following figure: Arrange classes and components to logical containers called layers. Typical, an enterprise application would have 5 layers as illustrated in the following figure

  Read the article

< Previous Page | 317 318 319 320 321 322 323 324 325 326 327 328  | Next Page >