Search Results

Search found 44940 results on 1798 pages for 'first rock'.

Page 321/1798 | < Previous Page | 317 318 319 320 321 322 323 324 325 326 327 328  | Next Page >

• How do I set up nvidia graphics adapter to put out 1080p, it seems to be using interlace mode>

  - by keepitsimpleengineer

  After upgrading to 12.04, my mythbuntu client/server seems to be running in 1080i, the clue comes from: [ 1176.117] (II) NVIDIA(0): Setting mode "1920x1080_60i" [ 1231.340] (II) NVIDIA(0): Setting mode "DFP-1:1920x1080_60@1920x1080+0+0" This is from Xorg.0.log. This whole thing started from video tearing when watching Mythtv recordings. It didn't happen in 10.10. Should I use "TVStandard" "HD1080p" in the screen section since this is a dedicated HTPC? It only connects to an HDTV (1080p) via hdmi. Here is the current xorg.conf file: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 270.29 (buildd@allspice) Fri Feb 25 14:42:07 UTC 2011 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 # commented out by update-manager, HAL is now used and auto-detects devices # Keyboard settings are now read from /etc/default/console-setup # InputDevice "Keyboard0" "CoreKeyboard" # commented out by update-manager, HAL is now used and auto-detects devices # Keyboard settings are now read from /etc/default/console-setup # InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" FontPath "unix/:7100" EndSection # commented out by update-manager, HAL is now used and auto-detects devices # Keyboard settings are now read from /etc/default/console-setup #Section "InputDevice" # # generated from default # Identifier "Mouse0" # Driver "mouse" # Option "Protocol" "auto" # Option "Device" "/dev/psaux" # Option "Emulate3Buttons" "no" # Option "ZAxisMapping" "4 5" #EndSection # commented out by update-manager, HAL is now used and auto-detects devices # Keyboard settings are now read from /etc/default/console-setup #Section "InputDevice" # # generated from default # Identifier "Keyboard0" # Driver "kbd" #EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "SAMSUNG" HorizSync 26.0 - 81.0 VertRefresh 24.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 240" Option "TripleBuffer" "1" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "DFP: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection After a little digging, the question changes slightly, to wit... Per Chapter 19 of nvidia README... "If the EDID for the display device reported a preferred mode timing, and that mode timing is considered a valid mode, then that mode is used as the "nvidia-auto-select" mode." The EDID for my HDMI connected LCD monitor says use first device as preferred. Prefer first detailed timing : Yes Also: (--) NVIDIA(0): EDID maximum pixel clock : 230.0 MHz The list: (from startx -- -verbose 6 ) (--) NVIDIA(0): Detailed Timings: (--) NVIDIA(0): 1920 x 1080 @ 60 Hz (--) NVIDIA(0): Pixel Clock : 148.50 MHz (--) NVIDIA(0): HRes, HSyncStart : 1920, 2008 (--) NVIDIA(0): HSyncEnd, HTotal : 2052, 2200 (--) NVIDIA(0): VRes, VSyncStart : 1080, 1084 (--) NVIDIA(0): VSyncEnd, VTotal : 1089, 1125 (--) NVIDIA(0): H/V Polarity : +/+ This is the actual mode selected: (from xorg.0.log) (--) NVIDIA(0): 1920 x 1080 @ 60 Hz (--) NVIDIA(0): Pixel Clock : 74.18 MHz (--) NVIDIA(0): HRes, HSyncStart : 1920, 2008 (--) NVIDIA(0): HSyncEnd, HTotal : 2052, 2200 (--) NVIDIA(0): VRes, VSyncStart : 1080, 1084 (--) NVIDIA(0): VSyncEnd, VTotal : 1094, 1124 (--) NVIDIA(0): H/V Polarity : +/+ (--) NVIDIA(0): Extra : Interlaced (--) NVIDIA(0): CEA Format : 5 So my HTPC is down-converting to 1080i and then the Monitor is up-converting to 1080p How can I fix this, please?

  Read the article

• JSP Precompilation for ADF Applications

  - by Duncan Mills

  A question that comes up from time to time, particularly in relation to build automation, is how to best pre-compile the .jspx and .jsff files in an ADF application. Thus ensuring that the app is ready to run as soon as it's installed into WebLogic. In the normal run of things, the first poor soul to hit a page pays the price and has to wait a little whilst the JSP is compiled into a servlet. Everyone else subsequently gets a free lunch. So it's a reasonable thing to want to do... Let Me List the Ways So forth to Google (other search engines are available)... which lead me to a fairly old article on WLDJ - Removing Performance Bottlenecks Through JSP Precompilation. Technololgy wise, it's somewhat out of date, but the one good point that it made is that it's really not very useful to try and use the precompile option in the weblogic.xml file. That's a really good observation - particularly if you're trying to integrate a pre-compile step into a Hudson Continuous Integration process. That same article mentioned an alternative approach for programmatic pre-compilation using weblogic.jspc. This seemed like a much more useful approach for a CI environment. However, weblogic.jspc is now obsoleted by weblogic.appc so we'll use that instead.  Thanks to Steve for the pointer there. And So To APPC APPC has documentation - always a great place to start, and supports usage both from Ant via the wlappc task and from the command line using the weblogic.appc command. In my testing I took the latter approach. Usage, as the documentation will show you, is superficially pretty simple.  The nice thing here, is that you can pass an existing EAR file (generated of course using OJDeploy) and that EAR will be updated in place with the freshly compiled servlet classes created from the JSPs. Appc takes care of all the unpacking, compiling and re-packing of the EAR for you. Neat.  So we're done right...? Not quite. The Devil is in the Detail  OK so I'm being overly dramatic but it's not all plain sailing, so here's a short guide to using weblogic.appc to compile a simple ADF application without pain.  Information You'll Need The following is based on the assumption that you have a stand-alone WLS install with the Application Development  Runtime installed and a suitable ADF enabled domain created. This could of course all be run off of a JDeveloper install as well 1. Your Weblogic home directory. Everything you need is relative to this so make a note.  In my case it's c:\builds\wls_ps4. 2. Next deploy your EAR as normal and have a peek inside it using your favourite zip management tool. First of all look at the weblogic-application.xml inside the EAR /META-INF directory. Have a look for any library references. Something like this: <library-ref>    <library-name>adf.oracle.domain</library-name> </library-ref>   Make a note of the library ref (adf.oracle.domain in this case) , you'll need that in a second. 3. Next open the nested WAR file within the EAR and then have a peek inside the weblogic.xml file in the /WEB-INF directory. Again  make a note of the library references. 4. Now start the WebLogic as per normal and run the WebLogic console app (e.g. http://localhost:7001/console). In the Domain Structure navigator, select Deployments. 5. For each of the libraries you noted down drill into the library definition and make a note of the .war, .ear or .jar that defines the library. For example, in my case adf.oracle.domain maps to "C:\ builds\ WLS_PS4\ oracle_common\ modules\ oracle. adf. model_11. 1. 1\ adf. oracle. domain. ear". Note the extra spaces that are salted throughout this string as it is displayed in the console - just to make it annoying, you'll have to strip these out. 6. Finally you'll need the location of the adfsharebean.jar. We need to pass this on the classpath for APPC so that the ADFConfigLifeCycleCallBack listener can be found. In a more complex app of your own you may need additional classpath entries as well.  Now we're ready to go, and it's a simple matter of applying the information we have gathered into the relevant command line arguments for the utility A Simple CMD File to Run APPC  Here's the stub .cmd file I'm using on Windows to run this. @echo offREM Stub weblogic.appc Runner setlocal set WLS_HOME=C:\builds\WLS_PS4 set ADF_LIB_ROOT=%WLS_HOME%\oracle_common\modulesset COMMON_LIB_ROOT=%WLS_HOME%\wlserver_10.3\common\deployable-libraries set ADF_WEBAPP=%ADF_LIB_ROOT%\oracle.adf.view_11.1.1\adf.oracle.domain.webapp.war set ADF_DOMAIN=%ADF_LIB_ROOT%\oracle.adf.model_11.1.1\adf.oracle.domain.ear set JSTL=%COMMON_LIB_ROOT%\jstl-1.2.war set JSF=%COMMON_LIB_ROOT%\jsf-1.2.war set ADF_SHARE=%ADF_LIB_ROOT%\oracle.adf.share_11.1.1\adfsharembean.jar REM Set up the WebLogic Environment so appc can be found call %WLS_HOME%\wlserver_10.3\server\bin\setWLSEnv.cmd CLS REM Now compile away!java weblogic.appc -verbose -library %ADF_WEBAPP%,%ADF_DOMAIN%,%JSTL%,%JSF% -classpath %ADF_SHARE% %1 endlocal Running the above on a target ADF .ear  file will zip through and create all of the relevant compiled classes inside your nested .war file in the \WEB-INF\classes\jsp_servlet\ directory (but don't take my word for it, run it and take a look!) And So... In the immortal words of  the Pet Shop Boys, Was It Worth It? Well, here's where you'll have to do your own testing. In  my case here, with a simple ADF application, pre-compilation shaved an non-scientific "3 Elephants" off of the initial page load time for the first access of each page. That's a pretty significant payback for such a simple step to add into your CI process, so why not give it a go.

  Read the article

• website particular url suddenly disappeared from google search result

  - by Ragavendran Ramesh

  i have a website , in that a particular page url was indexed in google search result in the first 10 results , but suddenly it disappeared , not that page is not even in the 100results , what would be the reason. i am feeling that the page has be spammed by our competitors . is it possible to avoid that , or can i find that page has been spammed or not. Is it possible to find the particular page in a website is spam or malicious.

  Read the article

• Paypal PDT and IPN , how does it work?

  - by slow diver

  PDT Payment Data Transfer is getting the transaction data of the purchase that was made on paypal site and you want to fetch that on your own site and display to the user. Also you may want to store it in your database for archive and tracking purposes. But I cannot exactly follow the documentation here What I am not getting is Once you have activated PDT, every time a buyer makes a website payment and is redirected to your return URL, a transaction token will be passed along as a "GET" variable to this return URL. In order to properly use PDT and display transaction details to your customer, you should fetch the transaction token, variable name "tx", and retreive transaction details from PayPal by constructing an HTTP POST to PayPal. Your POST should be sent to https://www.paypal.com/cgi-bin/webscr. You must post the transaction token using the variable "tx" and the value of the transaction token previously received (e.g. "tx=transaction_token"), and the special identity token using the variable at and the value of your PDT identity token (e.g. "at=identity_token"). You will also need to append a variable named "cmd" with the value "_notify-synch", for example "cmd=_notify-synch", to the POST string. IPN I have setup Instant Payment Notification through setting according to this documentation. This is basically logging into your paypal account and enable IPN while specifying a url where the notification will be sent. This is used to complete an order so that the product can be shipped. What I did is setup a PHP page. I have created a table and whenever that page is called (or hit), it registers an entry in the table so I know a notification came from Paypal. But it does not work either. What am I really doing wrong? The first thing I want to trouble shoot though is when the buyer pays the amount, he is automatically redirected to my site. I have enabled this but automatic redirection just does not work. Instead he is shown the url as an option after payment confirmation is shown. Can someone guide my how the PDT process goes? Where do I make the request for PDT, is it along the very first request (Buy Now button) or it is sent later? Addition I found some good sampling code of how everything should work but it still does not work. I use this code http://officetrio.com/modules/free-php-paypal-ipn-script.php for IPN. I am using this for PDT. This one uses SSL, I changed SSL to regular HTTP (copied paypal version), still does not work. http://ykyuen.wordpress.com/2010/02/17/paypal-payment-data-transfer-sample-code/

  Read the article

• EBS 11i and 12.1 Support Timeline Changes

  - by Steven Chan (Oracle Development)

  Two important changes to the Oracle Lifetime Support policies for Oracle E-Business Suite were announced at OpenWorld last week.  These changes affect EBS Releases 11i and 12.1. The changes are detailed in this My Oracle Support document: E-Business Suite 11.5.10 Sustaining Support Exception & 12.1 Extended Support Now to Dec. 2018 (Note 1495337.1) 1. Changes for EBS 11i Sustaining Support The first change is that  we will be providing an exception for the first 13 months of Sustaining Support on Oracle E-Business Suite Release 11.5.10 (11i10), valid from December 1, 2013 – December 31, 2014. This exception support will be comprised of three components: New fixes for Severity 1 production issues United States Form 1099 2013 year-end updates Payroll regulatory updates for the United States, Canada, United Kingdom, and Australia for fiscal years ending in 2014 Customers environments must have the minimum baseline patches (or above) for new Severity 1 production bug fixes as documented here: Patch Requirements for Extended Support of Oracle E-Business Suite Release 11.5.10 (Note 883202.1) 2. Changes for EBS 12.1 Extended Support More time:  Extended Support period for E-Business Suite Release 12.1 has been extended by nineteen months through December, 2018. Customers with an active Oracle Premier Support for Software contract will automatically be entitled to Extended Support for E-Business Suite 12.1. Fees waived:  Uplift fees are waived for all years of Extended Support (June, 2014 – December. 2018) for customers with an active Oracle Premier Support for Software contract. During this period, customers will receive all of the components of Extended Support at no additional cost other than their fees for Software Update License & Support. Where can I learn more? There are two interlocking policies that affect the E-Business Suite:  Oracle's Lifetime Support policies for each EBS release (timelines which were updated by this announcement), and the Error Correction Support policies (which state the minimum baselines for new patches). For more information about how these policies interact, see: Understanding Support Windows for E-Business Suite Releases What about E-Business Suite technology stack components?Things get more complicated when one considers individual techstack components such as Oracle Forms or the Oracle Database.  To learn more about the interlocking EBS+techstack component support windows, see these two articles: On Apps Tier Patching and Support: A Primer for E-Business Suite Users On Database Patching and Support: A Primer for E-Business Suite Users Related Articles Extended Support Fees Waived for E-Business Suite 11i and 12.0 EBS 12.0 Minimum Requirements for Extended Support Finalized

  Read the article

• Emtel Knowledge Series - Q2/2014

  From Cyber Island to Smart Mauritius Cyber Island? Smart Mauritius? - What is Emtel talking about? "With the majority of the population living in urban environments today, the concept of "Smart Cities" has become an urgent necessity. "Smart Cities" refer to an urban transformation which, by using latest ICT technologies makes cities more efficient. Many Governments are setting out ambitious plans to build the cities of the future based on massive connectivity, high bandwidth communications, intelligent sensors and analysis of huge volumes of data. Various researches have shown four key enablers for smart city success - Government leadership, suitable technology infrastructure, solid public-private partnerships and engaged citizens. It is around these enabling factors that telecoms companies can play a vital role in assisting governments to deliver on the smart city vision." The Emtel Knowledge Series goes in compliance with Emtel's 25th anniversary celebrations throughout the year and the master of ceremony, Kim Andersen, mentioned that there will be more upcoming events on a quarterly base. As a representative of the Mauritius Software Craftsmanship Community (MSCC) there was absolutely no hesitation to join in again. Following my visit to the first Emtel Knowledge Series workshop back in February this year, it was great to have another opportunity to meet and exchange with technology experts. But quite frankly what is it with those buzz words... As far as I remember and how it was mentioned "Cyber Island" is an old initiative from around 2005/2006 which has been refreshed in 2010. It implies the empowerment of Information & Communication Technologies (ICT) as an essential factor of growth by the government here in Mauritius. Actually, the first promotional period of Cyber Island brought me here but that's another story. The venue and its own problems Like last time the event was organised and held at the Conference Hall at Cyber Tower I in Ebene. As I've been working there for some years, I know about the frustrating situation of finding a proper parking. So, does Smart Island include better solutions for the search of parking spaces? Maybe, let's see whether I will be able to answer that question at the end of the article. Anyway, after circling around the tower almost two times, I finally got a decent space to put the car, without risking to get a ticket or damage actually. International speakers and their experience Once again, Emtel did a great job to get international expertise onto the stage to share their experience and vision on this kind of embarkment. Personally, I really appreciated the fact they were speakers of global reach and could provide own-experience knowledge. Johan Gott spoke about the fundamental change that the Swedish government ignited in order to move their society and workers' environment away from heavy industry towards a knowledge-based approach. Additionally, we spoke about the effort and transformation of New York City into a greener and more efficient Smart City. Given modern technology he also advised that any kind of available Big Data should be opened to the general public - this openness would provide a playground for anyone to garner new ideas and most probably solid solutions of which no one else thought about before. Emtel Knowledge Series on moving from Cyber Island to Smart Mauritus Later during the afternoon that exact statement regarding openness to and transparency of government-owned Big Data has been emphasised again by the Danish speaker Kim Andersen and his former colleague Mika Jantunen from Finland. Mika continued to underline the important role of the government to provide a solid foundation for a knowledge-based society and mentioned that Finnish citizens have a constitutional right to broadband connectivity. Next to free higher (tertiary) education Finland already produced a good number of innovations, among them are: First country to grant voting rights to women Free higher education Constitutional right to broadband connectivity Nokia Linux Angry Birds Sauna and others...  General access to internet via broadband and/or mobile connectivity is surely a key factor towards Smart Cities, or better said Smart Mauritius given the area dimensions and size of population. CTO Paul Valette gave the audience a brief overview of the essential role that Emtel will have to move Mauritius forward towards a knowledge-based and innovation-driven environment for its citizen. What I have seen looks really promising and with recently published information that Mauritians have 127% of mobile capacity - meaning more than 1 mobile, smartphone or tablet per person - it will be crucial to have the right infrastructure for these connected devices. How would it be possible to achieve a knowledge-based society? YouTube to the rescue!Seriously, gaining more knowledge will require to have fast access to educational course material as explained by Dr Kaviraj Sukon, General Director of the Open University of Mauritius. According to him a good number of high-profile universities in the world have opened their course libraries to the general public, among them EDX, Coursera and Open University. Nowadays, you're actually able and enabled to learn for and earn a BSc or even MSc certification on your own pace - no need to attend classed on campus. It was really impressive to see the number of available hours - more than enough for a life-long learning experience! {loadposition content_adsense} Networking in the name of MSCC As briefly mentioned above I was about to combine two approaches for this workshop. Of course, getting latest information and updates on Emtel services available, especially for my business here on the west coast of the island, but also to meet and greet new people for the MSCC. And I think it was very positive on both sides. Let me quickly describe some of the key aspects that happened during the day: Met with Arnaud Meslier and Kellie, both Microsoft to swap latest information on IT events. Hereby, I got an invite to Microsoft Windows Phone 8.1 Dev Camp. Got in touch with Arvin Lockee, Emtel to check our options to meet with the data team, and seizing the opportunity to have a visiting tour at the Emtel Data Centre. Had a great chat with Avinash Meetoo, Knowledge 7, Kim Andersen and Mika Jantunen about the situation of teaching and learning in general and specifically in the private sector here in Mauritius. Additionally, a number of various other interesting chats... Once again, I'm catching up on a couple of business cards in order to provide more background information about the MSCC, and to create a better awareness of MSCC within the local IT businesses. There is more to come soon!  Resume of the day The number of attendees during this event has been doubled or even tripled this time. The whole organisation has been improved massively and the combination of presentation and summarizing panel discussions was better than during the previous workshop back in February. Overall, once again a well-organised workshop and I'm already looking forward to join the next workshop in Q3. Update End of July we finally managed to visit the Emtel Data Centre in Arsenal. It was an interesting opportunity for some of our MSCC members.

  Read the article

• Subterranean IL: Volatile

  - by Simon Cooper

  This time, we'll be having a look at the volatile. prefix instruction, and one of the differences between volatile in IL and C#. The volatile. prefix volatile is a tricky one, as there's varying levels of documentation on it. From what I can see, it has two effects: It prevents caching of the load or store value; rather than reading or writing to a cached version of the memory location (say, the processor register or cache), it forces the value to be loaded or stored at the 'actual' memory location, so it is then immediately visible to other threads. It forces a memory barrier at the prefixed instruction. This ensures instructions don't get re-ordered around the volatile instruction. This is slightly more complicated than it first seems, and only seems to matter on certain architectures. For more details, Joe Duffy has a blog post going into the details. For this post, I'll be concentrating on the first aspect of volatile. Caching field accesses To demonstrate this, I created a simple multithreaded IL program. It boils down to the following code: .class public Holder { .field public static class Holder holder .field public bool stop .method public static specialname void .cctor() { newobj instance void Holder::.ctor() stsfld class Holder Holder::holder ret }}.method private static void Main() { .entrypoint // Thread t = new Thread(new ThreadStart(DoWork)) // t.Start() // Thread.Sleep(2000) // Console.WriteLine("Stopping thread...") ldsfld class Holder Holder::holder ldc.i4.1 stfld bool Holder::stop call instance void [mscorlib]System.Threading.Thread::Join() ret}.method private static void DoWork() { ldsfld class Holder Holder::holder // while (!Holder.holder.stop) {} DoWork: dup ldfld bool Holder::stop brfalse DoWork pop ret} If you compile and run this code, you'll find that the call to Thread.Join() never returns - the DoWork spinlock is reading a cached version of Holder.stop, which is never being updated with the new value set by the Main method. Adding volatile to the ldfld fixes this: dupvolatile.ldfld bool Holder::stopbrfalse DoWork The volatile ldfld forces the field access to read direct from heap memory, which is then updated by the main thread, rather than using a cached copy. volatile in C# This highlights one of the differences between IL and C#. In IL, volatile only applies to the prefixed instruction, whereas in C#, volatile is specified on a field to indicate that all accesses to that field should be volatile (interestingly, there's no mention of the 'no caching' aspect of volatile in the C# spec; it only focuses on the memory barrier aspect). Furthermore, this information needs to be stored within the assembly somehow, as such a field might be accessed directly from outside the assembly, but there's no concept of a 'volatile field' in IL! How this information is stored with the field will be the subject of my next post.

  Read the article

• T-SQL User-Defined Functions: the good, the bad, and the ugly (part 4)

  - by Hugo Kornelis

  Scalar user-defined functions are bad for performance. I already showed that for T-SQL scalar user-defined functions without and with data access, and for most CLR scalar user-defined functions without data access , and in this blog post I will show that CLR scalar user-defined functions with data access fit into that picture. First attempt Sticking to my simplistic example of finding the triple of an integer value by reading it from a pre-populated lookup table and following the standard recommendations...(read more)

  Read the article

• Experiences with learning Chinese

  - by Greg Low

  I've had a few friends asking me about learning Chinese and what I've found works and doesn't work. I was answering a question on a mailing list today and I thought I should post this info where it might be useful to many. The question that was initially asked was whether Rosetta Stone was useful but I've provided much more info on learning the language here. I’ve used Rosetta Stone with Chinese but it’s really hard to know whether to recommend it or not. Rosetta Stone works the same way in all languages. They show you photos and then let you both see and hear the target language and get you to work out what they’re talking about. The thinking is that that’s how children learn. However, at first, I found it very frustrating. I’d be staring at photos trying to work out what they were really trying to get at. Sometimes it’s far from obvious. I could not have survived without Google Translate open at the same time. The other weird thing is that the photos are from a mixture of countries. While that’s good in a way, it also means that they are endlessly showing pictures of something that would never happen in the target language and culture. For any language, constant interaction with a speaker of the target language is needed. Rosetta Stone has a “Studio” option. That’s the best part of the program. In my case, it lets me connect around twice a week to a live online class from Beijing. Classes usually have the teacher plus two to four students. You get some Studio access with the initial packages but need to purchase it for ongoing use. I find it very inexpensive. It seems to work out to about $70 (AUD/USD) for six months. That’s a real bargain. The other downside to Rosetta Stone is that they tend to teach very formal language, but as with other languages, that’s not how the locals speak. It might have been correct at one point but no-one actually says that. As an example, Rosetta Stone teach Gonggòng qìche (pronounced roughly like “gong gong chee chure” for bus. Most of my friends from areas like Taiwan would just say Gongche. Google Translate says Zongxiàn (pronounced somewhat like “dzong sheean”) instead. Mind you, the Rosetta Stone option isn't really as bad as "omnibus"; it's more like saying "public bus". If you say the option they provide, people would understand you. I also listen to ChinesePod in the car. They also have SpanishPod. Each podcast is about five minutes of spoken conversation. It is very good for providing current language. Another resource I use is local Meetup groups. Most cities have these and for a variety of languages. It’s way less structured (just standard conversation) but good for getting interaction. The obvious challenge for Asian languages is reading/writing. The input editors for Chinese that are part of Windows are excellent. Many of my Chinese friends speak fluently but cannot read or write. I was determined to learn to do both. For writing, I’m talking about on a computer, not with a pen. (Mind you, I can barely write English with a pen nowadays). When using Rosetta Stone, you can choose to have the Chinese words displayed in pinyin (Wo xihuan xuéxí zhongguó) or in Chinese characters (???????) or both. This year, I’ve been forcing myself to just use the Chinese characters. I use a pinyin input editor in Windows though, as it’s very fast.  (The character recognition input in the iPad is also amazing). Notice from the example that I provided above that the pronunciation of the pinyin isn’t that obvious to us at first either.  Since changing to only using characters, I find I can now read many more Chinese characters fluently. It’s a major challenge though. I can read about 300 now and yet you need around 2,500 to be able to read a newspaper fairly well. Tones are a major issue for some Asian languages. Mandarin has four tones (plus a neutral tone) and there is a major difference in meaning between two words that are spelled the same in pinyin but with different tones. For example, Ma (3rd tone?) is a horse, Ma (1st tone?) is like “mom”, and ma (neutral tone?) is a question mark and so on. Clearly you don’t want to mix these up. As in English, they also have words that do sound the same but mean different things in different contexts. What’s interesting is that even though we see two words that differ only by tone as very similar, to a native speaker, if you say the right words with the wrong tone, you might as well have said a completely different word. My wife’s dialect of Chinese has eight tones. It’s much worse. The reason I’m so keen to learn to read/write Chinese is that even though the different dialects are pronounced so differently that speakers of one dialect often cannot understand another dialect, the writing is generally the same. The only difference is that many years ago, the Chinese government created a simplified set of characters for some of the most commonly used ones. Older Chinese and most Cantonese speakers often struggle with the simplified characters. This is the simplified form of “three apples”: ????   This is the traditional form of the same words: ????  Note that two of the characters are the same but the middle two are quite different. For most languages, the best thing is to watch current movies in the target language but to watch them with the target language as subtitles, not your native language. You want to know what they actually said, not what it roughly means (which is what the English subtitle would give you). The difficulty with Asian languages like Chinese is that you have the added challenge of understanding the subtitles when they are written in the target language. I wish there were Mandarin Chinese movies with pinyin subtitles. For learning to read characters, I also recommend HanCard on the iPad. It is targeted at the HSK language proficiency levels. (I’m intending to take the first HSK exam as soon as I’m ready). Hope that info helps someone get started.  

  Read the article

• How do I avoid spam domains pointing to my site or IP

  - by Amol Ghotankar

  I came across an issue where I saw some xyz.com is pointing to mydomain.com. How do I avoid spam domains pointing to my domain? I read some posts about setting my virtual hosts and such, but nothing specific about how to avoid it in the first place. I searched on Google but most answers are for HTTP servers and there are no exact answers for Tomcat 7. I am not using Apache or IIS, but Tomcat directly.

  Read the article

• Future GNOME: What to Expect in GNOME 3.0

  <b>Datamation:</b> "The release of GNOME 3.0, the popular desktop's first major release in eight years, promises to be the major free software event in autumn 2010. Where is GNOME now? What can we expect of GNOME 3.0? Of GNOME 3 as a series of releases?"

  Read the article

• MySQL: Five Dials to Set

  In this article, Sean Hull looks at the first five out of ten dials that you can turn to get an initial MySQL vanilla install working for your specific application requirements.

  Read the article

• APress Deal of the Day 18/May/2014 - Pro ASP.NET Web API

  - by TATWORTH

  Originally posted on: http://geekswithblogs.net/TATWORTH/archive/2014/05/18/apress-deal-of-the-day-18may2014---pro-asp.net-web.aspxToday’s $10 Deal of the Day from APress at http://www.apress.com/9781430247258 is Pro ASP.NET Web API. “With the new ASP.NET Web API framework, HTTP has become a first-class citizen of .NET. Pro ASP.NET Web API shows you how to put this new technology into practice to build flexible, extensible web services that run seamlessly on a range of operating systems and devices.”

  Read the article

• This Week in Geek History: Microsoft Goes Public, Birth of Albert Einstein, The Internet Becomes Cross-Oceanic

  - by Jason Fitzpatrick

  Every week we take a look at interesting trivia and events from the history of Geekdom. This week we’re taking a look at the first public offering of Microsoft stock, the birth of Albert Einstein, and the cross linking of information networks across the Atlantic.How to Enable Google Chrome’s Secret Gold IconHTG Explains: What’s the Difference Between the Windows 7 HomeGroups and XP-style Networking?Internet Explorer 9 Released: Here’s What You Need To Know

  Read the article

• Oracle OpenWorld 2013 – Wrap up by Sven Bernhardt

  - by JuergenKress

  OOW 2013 is over and we’re heading home, so it is time to lean back and reflecting about the impressions we have from the conference. First of all: OOW was great! It was a pleasure to be a part of it. As already mentioned in our last blog article: It was the biggest OOW ever. Parallel to the conference the America’s Cup took place in San Francisco and the Oracle Team America won. Amazing job by the team and again congratulations from our side Back to the conference. The main topics for us are: Oracle SOA / BPM Suite 12c Adaptive Case management (ACM) Big Data Fast Data Cloud Mobile Below we will go a little more into detail, what are the key takeaways regarding the mentioned points: Oracle SOA / BPM Suite 12c During the five days at OOW, first details of the upcoming major release of Oracle SOA Suite 12c and Oracle BPM Suite 12c have been introduced. Some new key features are: Managed File Transfer (MFT) for transferring big files from a source to a target location Enhanced REST support by introducing a new REST binding Introduction of a generic cloud adapter, which can be used to connect to different cloud providers, like Salesforce Enhanced analytics with BAM, which has been totally reengineered (BAM Console now also runs in Firefox!) Introduction of templates (OSB pipelines, component templates, BPEL activities templates) EM as a single monitoring console OSB design-time integration into JDeveloper (Really great!) Enterprise modeling capabilities in BPM Composer These are only a few points from what is coming with 12c. We are really looking forward for the new realese to come out, because this seems to be really great stuff. The suite becomes more and more integrated. From 10g to 11g it was an evolution in terms of developing SOA-based applications. With 12c, Oracle continues it’s way – very impressive. Adaptive Case Management Another fantastic topic was Adaptive Case Management (ACM). The Oracle PMs did a great job especially at the demo grounds in showing the upcoming Case Management UI (will be available in 11g with the next BPM Suite MLR Patch), the roadmap and the differences between traditional business process modeling. They have been very busy during the conference because a lot of partners and customers have been interested Big Data Big Data is one of the current hype themes. Because of huge data amounts from different internal or external sources, the handling of these data becomes more and more challenging. Companies have a need for analyzing the data to optimize their business. The challenge is here: the amount of data is growing daily! To store and analyze the data efficiently, it is necessary to have a scalable and flexible infrastructure. Here it is important that hardware and software are engineered to work together. Therefore several new features of the Oracle Database 12c, like the new in-memory option, have been presented by Larry Ellison himself. From a hardware side new server machines like Fujitsu M10 or new processors, such as Oracle’s new M6-32 have been announced. The performance improvements, when using one of these hardware components in connection with the improved software solutions were really impressive. For more details about this, please take look at our previous blog post. Regarding Big Data, Oracle also introduced their Big Data architecture, which consists of: Oracle Big Data Appliance that is preconfigured with Hadoop Oracle Exdata which stores a huge amount of data efficently, to achieve optimal query performance Oracle Exalytics as a fast and scalable Business analytics system Analysis of the stored data can be performed using SQL, by streaming the data directly from Hadoop to an Oracle Database 12c. Alternatively the analysis can be directly implemented in Hadoop using “R”. In addition Oracle BI Tools can be used to analyze the data. Fast Data Fast Data is a complementary approach to Big Data. A huge amount of mostly unstructured data comes in via different channels with a high frequency. The analysis of these data streams is also important for companies, because the incoming data has to be analyzed regarding business-relevant patterns in real-time. Therefore these patterns must be identified efficiently and performant. To do so, in-memory grid solutions in combination with Oracle Coherence and Oracle Event Processing demonstrated very impressive how efficient real-time data processing can be. One example for Fast Data solutions that was shown during the OOW was the analysis of twitter streams regarding customer satisfaction. The feeds with negative words like “bad” or “worse” have been filtered and after a defined treshold has been reached in a certain timeframe, a business event was triggered. Cloud Another key trend in the IT market is of course Cloud Computing and what it means for companies and their businesses. Oracle announced their Cloud strategy and vision – companies can focus on their real business while all of the applications are available via Cloud. This also includes Oracle Database or Oracle Weblogic, so that companies can also build, deploy and run their own applications within the cloud. Three different approaches have been introduced: Infrastructure as a Service (IaaS) Platform as a Service (PaaS) Software as a Service (SaaS) Using the IaaS approach only the infrastructure components will be managed in the Cloud. Customers will be very flexible regarding memory, storage or number of CPUs because those parameters can be adjusted elastically. The PaaS approach means that besides the infrastructure also the platforms (such as databases or application servers) necessary for running applications will be provided within the Cloud. Here customers can also decide, if installation and management of these infrastructure components should be done by Oracle. The SaaS approach describes the most complete one, hence all applications a company uses are managed in the Cloud. Oracle is planning to provide all of their applications, like ERP systems or HR applications, as Cloud services. In conclusion this seems to be a very forward-thinking strategy, which opens up new possibilities for customers to manage their infrastructure and applications in a flexible, scalable and future-oriented manner. As you can see, our OOW days have been very very interresting. We collected many helpful informations for our projects. The new innovations presented at the confernce are great and being part of this was even greater! We are looking forward to next years’ conference! Links: http://www.oracle.com/openworld/index.html http://thecattlecrew.wordpress.com/2013/09/23/first-impressions-from-oracle-open-world-2013 SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Facebook Wiki Mix Forum Technorati Tags: cattleCrew,Sven Bernhard,OOW2013,SOA Community,Oracle SOA,Oracle BPM,Community,OPN,Jürgen Kress

  Read the article

• Speaking at Atlanta.MDF on March 12

  - by RickHeiges

  I am fortunate enough to be speaking to a user group with a really cool name - Atlanta.MDF (Microsoft Database Forum). Although I visit Atlanta often, it usually involves running from one councourse to another and rarely do I get the chance to visit the user group. I have made it to the user group on several occassions in the past, but it has been several years. This will be my first presentation to the group. I will be speaking about Database Consolidation - something I have been doing for years....(read more)

  Read the article

• Expert Cube Development book finally on Kindle!

  - by Marco Russo (SQLBI)

  The book Expert Cube Development with Microsoft SQL Server 2008 Analysis Services is finally available on Kindle ! I received many requests for that and the last one just a couple of days ago from Greg Low in its useful review . I'm curious to see whether the sales of this book will continue also on Kindle. After 2 years this book is still continuing to sell as in the first months. The content is still fresh and will be good also with the next release of Analysis Services for developing multidimensional...(read more)

  Read the article

• IIS8 Memory Improvements

  - by The Official Microsoft IIS Site

  There is a lot of buzz in the Internet Information Services (IIS) community about IIS 8, the version of IIS that is included with Windows Server 2012. While there are plenty of new features in IIS 8, for this writing I am going to focus on the memory improvements that you will see for the application pools. Memory is a key resource on an IIS server as it is often the first limiting factor if you planned your CPU and disk requirements appropriately. I was fortunate to be able to attend TechEd North...(read more)

  Read the article

• Working with Legacy code #3 : Build a safety net.

  - by andrewstopford

  The first port of call in changing legacy code is a safety net, without one your fingers will get burnt. Make your safety net a high level functional test over the major areas of the application. Automate the test, plug it into your CI builds and run it every night. The test should act as a final fail safe as you work.

  Read the article

• London: SQLFAQ 2010 Festive Soirée (Buffet & Dance) - 17th December

  - by NeilHambly

  On the 17th December (Friday Evening) I'm holding a Xmas Soirée (Buffet & Dance) @ Central London club, so dress to impress & join us for this festive Soirée, Enjoy a Fabulous buffet, along with reserved seating for the evening, fee also includes cover charge to club areas which ahs multiple different dance floors & music Cost Per Person is £25 (Includes finger buffet & first drink, resevred seating & club access) Please notify me if you wish to be included in this as bookings...(read more)

  Read the article

• The Basics of Landing Page Analysis

  Whenever we go online and visit a website, the first page that we arrive at is the landing page. This has a huge bearing on what we do next.

  Read the article

• Shadow mapping: what is the light looking at?

  - by PgrAm

  I'm all set to set up shadow mapping in my 3d engine but there is one thing I am struggling to understand. The scene needs to be rendered from the light's point of view so I simply first move my camera to the light's position but then I need to find out which direction the light is looking. Since its a point light its not shining in any particular direction. How do I figure out what the orientation for the light point of view is?

  Read the article

• How Local SEO Can Improve Your Business

  Local search engine optimization is a good first step to conquer the search engines and present your business. This article summarizes some of the positive aspects of Local SEO, and why businesses should not scared to embrace the internet as a new marketing medium.

  Read the article

• Developing Schema Compare for Oracle (Part 1)

  - by Simon Cooper

  SQL Compare is one of Red Gate's most successful SQL Server tools; it allows developers and DBAs to compare and synchronize the contents of their databases. Although similar tools exist for Oracle, they are quite noticeably lacking in the usability and stability that SQL Compare is known for in the SQL Server world. We could see a real need for a usable schema comparison tools for Oracle, and so the Schema Compare for Oracle project was born. Over the next few weeks, as we come up to release of v1, I'll be doing a series of posts on the development of Schema Compare for Oracle. For the first post, I thought I would start with the main pitfalls that we stumbled across when developing the product, especially from a SQL Server background. 1. Schemas and Databases The most obvious difference is that the concept of a 'database' is quite different between Oracle and SQL Server. On SQL Server, one server instance has multiple databases, each with separate schemas. There is typically little communication between separate databases, and most databases are no more than about 1000-2000 objects. This means SQL Compare can register an entire database in a reasonable amount of time, and cross-database dependencies probably won't be an issue. It is a quite different scene under Oracle, however. The terms 'database' and 'instance' are used interchangeably, (although technically 'database' refers to the datafiles on disk, and 'instance' the running Oracle process that reads & writes to the database), and a database is a single conceptual entity. This immediately presents problems, as it is infeasible to register an entire database as we do in SQL Compare; in my Oracle install, using the standard recommended options, there are 63975 system objects. If we tried to register all those, not only would it take hours, but the client would probably run out of memory before we finished. As a result, we had to allow people to specify what schemas they wanted to register. This decision had quite a few knock-on effects for the design, which I will cover in a future post. 2. Connecting to Oracle The next obvious difference is in actually connecting to Oracle – in SQL Server, you can specify a server and database, and off you go. On Oracle things are slightly more complicated. SIDs, Service Names, and TNS A database (the files on disk) must have a unique identifier for the databases on the system, called the SID. It also has a global database name, which consists of a name (which doesn't have to match the SID) and a domain. Alternatively, you can identify a database using a service name, which normally has a 1-to-1 relationship with instances, but may not if, for example, using RAC (Real Application Clusters) for redundancy and failover. You specify the computer and instance you want to connect to using TNS (Transparent Network Substrate). The user-visible parts are a config file (tnsnames.ora) on the client machine that specifies how to connect to an instance. For example, the entry for one of my test instances is: SC_11GDB1 = (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = simonctest)(PORT = 1521)) ) (CONNECT_DATA = (SID = 11gR1db1) ) ) This gives the hostname, port, and SID of the instance I want to connect to, and associates it with a name (SC_11GDB1). The tnsnames syntax also allows you to specify failover, multiple descriptions and address lists, and client load balancing. You can then specify this TNS identifier as the data source in a connection string. Although using ODP.NET (the .NET dlls provided by Oracle) was fine for internal prototype builds, once we released the EAP we discovered that this simply wasn't an acceptable solution for installs on other people's machines. Due to .NET assembly strong naming, users had to have installed on their machines the exact same version of the ODP.NET dlls as we had on our build server. We couldn't ship the ODP.NET dlls with our installer as the Oracle license agreement prohibited this, and we didn't want to force users to install another Oracle client just so they can run our program. To be able to list the TNS entries in the connection dialog, we also had to locate and parse the tnsnames.ora file, which was complicated by users with several Oracle client installs and intricate TNS entries. After much swearing at our computers, we eventually decided to use a third party Oracle connection library from Devart that we could ship with our program; this could use whatever client version was installed, parse the TNS entries for us, and also had the nice feature of being able to connect to an Oracle server without having any client installed at all. Unfortunately, their current license agreement prevents us from shipping an Oracle SDK, but that's a bridge we'll cross when we get to it. 3. Running synchronization scripts The most important difference is that in Oracle, DDL is non-transactional; you cannot rollback DDL statements like you can on SQL Server. Although we considered various solutions to this, including using the flashback archive or recycle bin, or generating an undo script, no reliable method of completely undoing a half-executed sync script has yet been found; so in this case we simply have to trust that the DBA or developer will check and verify the script before running it. However, before we got to that stage, we had to get the scripts to run in the first place... To run a synchronization script from SQL Compare we essentially pass the script over to the SqlCommand.ExecuteNonQuery method. However, when we tried to do the same for an OracleConnection we got a very strange error – 'ORA-00911: invalid character', even when running the most basic CREATE TABLE command. After much hair-pulling and Googling, we discovered that Oracle has got some very strange behaviour with semicolons at the end of statements. To understand what's going on, we need to take a quick foray into SQL and PL/SQL. PL/SQL is not T-SQL In SQL Server, T-SQL is the language used to interface with the database. It has DDL, DML, control flow, and many other nice features (like Turing-completeness) that you can mix and match in the same script. In Oracle, DDL SQL and PL/SQL are two completely separate languages, with different syntax, different datatypes and different execution engines within the instance. Oracle SQL is much more like 'pure' ANSI SQL, with no state, no control flow, and only the basic DML commands. PL/SQL is the Turing-complete language, but can only do DML and DCL (i.e. BEGIN TRANSATION commands). Any DDL or SQL commands that aren't recognised by the PL/SQL engine have to be passed back to the SQL engine via an EXECUTE IMMEDIATE command. In PL/SQL, a semicolons is a valid token used to delimit the end of a statement. In SQL, a semicolon is not a valid token (even though the Oracle documentation gives them at the end of the syntax diagrams) . When you execute the command CREATE TABLE table1 (COL1 NUMBER); in SQL*Plus the semicolon on the end is a command to SQL*Plus to execute the preceding statement on the server; it strips off the semicolon before passing it on. SQL Developer does a similar thing. When executing a PL/SQL block, however, the syntax is like so: BEGIN INSERT INTO table1 VALUES (1); INSERT INTO table1 VALUES (2); END; / In this case, the semicolon is accepted by the PL/SQL engine as a statement delimiter, and instead the / is the command to SQL*Plus to execute the current block. This explains the ORA-00911 error we got when trying to run the CREATE TABLE command – the server is complaining about the semicolon on the end. This also means that there is no SQL syntax to execute more than one DDL command in the same OracleCommand. Therefore, we would have to do a round-trip to the server for every command we want to execute. Obviously, this would cause lots of network traffic and be very slow on slow or congested networks. Our first attempt at a solution was to wrap every SQL statement (without semicolon) inside an EXECUTE IMMEDIATE command in a PL/SQL block and pass that to the server to execute. One downside of this solution is that we get no feedback as to how the script execution is going; we're currently evaluating better solutions to this thorny issue. Next up: Dependencies; how we solved the problem of being unable to register the entire database, and the knock-on effects to the whole product.

  Read the article

• Evaluating Scrum - is it okay to have people with multiple roles in a Scrum team?

  - by Wayne M

  I'm evaluating some Agile-style methodologies for possible introduction to my team. With Scrum, is it allowable to have the same person perform multiple roles? We have a small team of four developers and a web designer; we don't really have a lead (I fulfill this role), QA testers or business analysts, and all of our development tasks come from the CIO. Automated testing is seen as a total waste of time, and everything focuses on speed and not quality. What will happen is the CIO will come up with a development task (whether a feature or a bug) and give it to a developer (not to the whole team, to an individual, often in private or out of the blue) who is then expected to get it completed. The CIO doesn't gather requirements beyond the initial idea (and this has bitten us before as we'll implement something only to find out that none of the end users can use the feature, because they weren't consulted or even informed about it before we developed it, and in a panic we'll be told to revert the change) but requires say in/approval of everything that we do. First things first, is a Scrum style something to consider to introduce some standards and practices? From reading, Scrum seems to rely on a bit more trust and communication and focuses more on project management than on development, which is something we are completely devoid of as we don't have any semblance of project management at present. Second, if it can work is it unreasonable for someone, let's say myself, to act as both ScrumMaster and a developer? Or for a developer to also be the Product Owner (although chances are this will be the CIO, who isn't a developer)? I realize the Scrum Master and the Product Owner should be different people but at the same time I don't think we have anyone who has the qualities of a Product Owner (chances are it would turn into a "I need all these stories, I don't care how but get it done" type of deal and/or any freeze would be unfrozen on a whim). It seems to me that I might need to pick and choose pieces of Scrum/XP/Lean to compensate for how things are done currently, as it's highly unlikely that the mentality can be changed; for instance Pair Programming would never fly (seen as a waste, you get half the tasks done if you need two people for everything), TDD would be a hard sell, but short cycles would be welcomed.

  Read the article

< Previous Page | 317 318 319 320 321 322 323 324 325 326 327 328  | Next Page >