Search Results

Search found 13135 results on 526 pages for 'actor model'.

Page 322/526 | < Previous Page | 318 319 320 321 322 323 324 325 326 327 328 329  | Next Page >

• Gateway SX2300-01u CPU/PSU issues

  - by Vlad

  I have a 2-yr-old Gateway SX2300-01u with an AMD Phenom X3 8550 that I feel has about a year or so of life left, but I am having a couple of hardware issues that I have not been able to resolve. First, the power supply fan sounds like much louder than before and the PSU itself is really hot. The PSU model (Liteon PS 5221-06) is not available at a reasonable price; are there any good alternatives? Could I replace just the PSU fan? Also, the CPU fan failed sometime back, but my replacement, which supposedly fits the MB (Socket AM2+) doesn't actually fit properly. Any idea why?

  Read the article

• Wireless Bridge with NetGear and TP-Link

  - by Tiago Cruz

  I have a wireless NetGear WGR614 v7 (little old) router connected to the internet, but I can't get a good signal in the other end of my house. I have another new one, model TP-Link TL-WR941ND wireless router. I was able to do the stuff works using a wired cable, but now, I would like to do the same using wireless connections (bridge mode, some like WDS?) Now, the computer connected to TP LINK was able to ping my computer connected to NETGEAR, but we cannot go IP ADDRESS outside my network, only internals ones. What can I do to configure this? Is needed that BOTH wireless routers support BRIDGE mode or only one its good enough? Thanks a lot!!

  Read the article

• Print server not being recognized after switching router and upgrading to 64 bit

  - by picardo

  I recently upgraded Windows 7 from 32 bit to 64 bit. I also switched my router from a very old model of Netgear to TP-Link. Before these updates, I had been using a USB print server by IOGear. After the updates, I took care to reinstall the drivers for both the print server and the printer, and picked the option to install a printer via TCP/IP, but no matter what I did, the driver software couldn't locate the print server on my network. I hit refresh, restarted my machine, turned off the firewalls and tried again. Still nothing. I'm at my wit's end. What else is left to try? Edit: More info. The print server is connected to the router via LAN line. The computer is connected to the router with a wireless connection.

  Read the article

• Logitech MK300 : "no driver found"

  - by Oystein

  Hi I bought kewyboard and mouse from Logitech. The model is MK300. I wanna run 64-bits Windows 7 with this. When I connect the USB-receiver, Windows is trying to install it but gives me the error message: "no driver found". I tried to download SetPoint 4.80, but that didn't help. I have rebooted the computer several of times, tried different USB'ports, and have allso tried menye different mouses from Logitech. Non of this works. Have someone any suggestions for how I can fix my problem?

  Read the article

• Can single ESXi host make use of two separete iSCSI box?

  - by user71061

  Hi! I have problem with using multiply iSCSI targets with single ESXi host (in my case they are two FreeNAS hosts, but I suspect that this problem will occur with any two iSCSI box of that same type/model). If I configure two FreeNAS hosts as iSCSI targets (say iSCSI A and iSCSI B), then I can use both of them with my ESXi host, but only one at a time (i.e only iSCSI A or only iSCSI B, but not both of them simultaneously). If I try to add second iSCSI target to my iSCSI adapter (of course it has unique iqn name), then in a details pane of this adapter (it is iSCSI software adapter), I see that total number of paths has increased accordingly, but not total number of devices (so I can't use it as another storage). What should I do? It is impossible to attach two iSCSI targets to single adapter? I'm using free version of ESXi 4.1. Maybe it is an limitation of free version? Thanks in advance for any sugestion.

  Read the article

• What influences the kind of RAM a desktop or laptop can support?

  - by Albert Iordache

  What exactly influences the kind of RAM a desktop or laptop can support? Apart from the clock speed, the maximum amount of RAM the motherboard can handle, the DDR type (1/2/3) and the shape of the module (DIMM for desktops, SO-DIMM for laptops)? I see that in certain cases, such as with the Kingston 4GB DDR3 1333MHz CL9, (and on the Kingston KTD-L3B/4G page) the page displays a set of laptop product numbers. Does the actual model of the laptop also influence the models of RAM it can support? Could, for instance, an Asus K52 work with that particular RAM module, even if it specifies Dell models?

  Read the article

• AT&T U-verse 2Wire Router - Increase session table limit?

  - by caleban

  AT&T U-verse VDSL "fiber to the node" 24Mbit down / 3Mbit up 2Wire Router Model 3800HGV-B Software Version 6.1.9.24-enh.tm The 2Wire router appears to have a limit of 1024 TCP and UDP sessions. This limit appears to apply to all sessions regardless of any static IP, firewall off, DMZ plus, secondary router configurations. I've tried using the 2Wire router alone and also configuring the 2Wire static IP addressing, firewall off, DMZ plus, etc. setup along with my own pfSense router/firewall. Either way it appears I exceed the 1024 session limit and sessions start being reset. Running out of sessions isn't being caused by torrents or p2p etc. We're a business and our legitimate uses are exceeding this session limit. AT&T tells me it's not possible to bridge the router or increase or avoid the session table limit. I'm curious if anyone has found a way around either of these issues.

  Read the article

• slow network in centos5 VM with centos5 host running KVM

  - by dan

  I setup KVM following the guide here: http://www.cyberciti.biz/faq/centos-rhel-linux-kvm-virtulization-tutorial/ I setup a bridged network and it worked fine except that the transfer speed is 200KB/s instead of the gigabit speed that I get on the host machine by itself. I tried editing the guest network settings to set "model=virtio" http://wiki.libvirt.org/page/Virtio but this just moves ifconfig-eth0 to ifconfig-eth0.bak in the VM and networking doesn't work at all. I tried moving ifconfig-eth0 back and starting up eth0, which works, but now the transfer speed is ~ 60KB/s I have no idea what else to try. Any suggestions would be greatly appreciated.

  Read the article

• Digital Blue Digital Movie Creator 3.0 driver

  - by hjdx

  I'm having a complete 'mare of a time trying to use my schools Digital Blue cameras. We've got the model 3 ones, but can't find the driver disc and using the Windows Hardware Installation Wizard gets me no where! Can you help me to find the driver? When I've used it at my old school it had a piece of software called the Digital Movie Creator, which I've heard you can use to make stop-motion films, which is what I want to do! This is what it looks like http://www.amazon.co.uk/Digital-Movie-Creator-1GB-Card/dp/B000LP30LA/ref=sr_1_2?ie=UTF8&s=software&qid=1265928833&sr=1-2

  Read the article

• Does any know fix/cause of USB drives that lose connection

  - by Burch Kealey

  I have been having significant problems trying to copy files to a USB drive (G0-Flex 1.5 tb) No matter what I use to try to copy the files (python code, Windows copy and paste or Drobo Copy utility) I ultimately get a failure. The failure is always some indication that the device is not ready or able to be written to. I am pretty sure the problem is that the drive is losing its connection. I have done everything I can find so far including setting the USB Root hub to never turn off the power, I updated some usb drivers etc. I have found references to this problem primarily with Win7-64 bit. I have also had USB connection problems with other devices- we kept losing a connection to our Bravo Disc Publisher when we went to Win7 and finally bought a newer model and have not had problems since. Any pointers about diagnosing and or understanding the problem would be appreciated.

  Read the article

• Linux openSUSE 11.2 on VAIO Z890T

  - by alfredozn

  I have a VAIO Z-series (VGN-Z890T) and I want to install openSUSE 11.2. I found some guides to fix the problem for the video card switch, but all for older models, those preconfigured with windows vista. It looks like newer model use a different bios configuration to support hot swap between cards in Windows 7 and this change breaks the solution to my problem. I'm not an experienced linux user, but i was using it recently on my old computer ind definitively I want it on my laptop. I installed openSUSE once and i was trying and trying to solve it until I finished reinstall again and use a fresh installation. My question is: Does anyone has installed and configured successfully openSUSE on one of the latest vaio z laptops???

  Read the article

• kvm memory changes via virsh not propagating to vm

  - by kevintmckay

  Hi I just started using kvm on rhel6 and after creating a vm I tried to increase the memory but the changes I amde in the xml file do not propogate to vm, even after bouncing vm and restarting libvert? [root@kvm01 qemu]# virsh dominfo dev-kvm01 Id: 2 Name: dev-kvm01 UUID: 9b2bf581-2807-3116-b176-60e9c0559943 OS Type: hvm State: running CPU(s): 2 CPU time: 1975.3s Max memory: 7864320 kB Used memory: 7864320 kB Persistent: yes Autostart: disable Security model: selinux Security DOI: 0 Security label: system_u:system_r:svirt_t:s0:c47,c760 (enforcing) [iknowmed@dev-kvm01 ~]$ free total used free shared buffers cached Mem: 3632284 3614508 17776 0 3980 3491676 -/+ buffers/cache: 118852 3513432 Swap: 5668856 0 5668856

  Read the article

• Windows XP does not list WPA wireless networks

  - by Tomalak

  What can be the reason that Windows XP does not show WPA-encrypted wireless networks? The laptop I have problems with is an older model (Toshiba Satellite Pro 6100) with Windows XP SP3 on it, fresh install. The wireless network card in it is an Agere product that lists as "Toshiba Wireless LAN Mini PCI Card". The networks showed up perfectly before I first tried to connect to one (it was set to WPA2). The connection failed (the card supports WPA only), then something must have happend and Windows hides these networks now. A manually configured WPA setup via Windows' own wizard works, I'm using it right now. The network just won't show up in the list of available network on its own. I suspect that XP incorrectly set a flag somewhere that this network card does not support WPA. Is there such a flag, and if so, how can I change it back?

  Read the article

• How to keep the function key locked on Lenovo E431?

  - by Bob

  For the Lenovo e431, how do you keep the function key locked. Right now, the default is when you press F1-F12, he multimedia controls are active. To get to the standard F1-F12, you have to hold down Fn+the function key. This used to available in bios, but for this laptop model, it no longer is available. You can press Fn+esc, and it locks it for that session, but when the computer reboots, this is reset back to the default. Is there a way so that the default is not the multimedia function keys, but just the standard, legacy function keys? Thanks.

  Read the article

• Macbook Pro Multiple Monitor Problem

  - by thinksocrates

  I have been using a Macbook pro (newest model) for about 4 weeks with dual monitors. It has been working great using the mac adaptor to dvi. Today however, my mac will not recognize it's built in monitor while the second monitor is plugged in. Plug in second monitor The screen on the laptop goes dark. The second monitor acts as the main screen. Click "Detect displays". Nothing happens Unplug the second monitor Screen on the laptop comes on. Any thoughts?

  Read the article

• TP-LINK TD-W8151N Modem/router as just wi-fi router

  - by Reshma

  I am planning to buy TP-LINK ADSL wifi router (model TD-W8151N) for my Internet connection which provides Internet through ADSL telephone line. I am also planning to take cable internet in a few months which provides internet through a LAN cable without the need of any modem. So I would like to have my modem work for both connections which I am using. When using cable internet I want this TP-Link modem to work just as a wireless router (so that I can have the freedom to use my laptop in different rooms instead of sitting at a place by plugging in that cable). Is it possible to use this modem in that way? I don't have much knowledge about these things except that I can configure things as instructed. Please suggest me whether I should go ahead and buy this one or if there is any other modem in your view which can serve both my purposes, let me know. Operating System I am using: Windows 7

  Read the article

• Create a Windows Image for Deployment

  - by Kiranu

  In my company we have 8 laptops that we use to deploy on the field. These machines get assigned to a user for a certain time and run Windows Vista. All the machines are the same model. After the machine is returned, it is company policy to completely format the machine and go back to a predetermined configuration. Right now, what we do is we use the recovery utility in the laptop (we are a small shop so we use the OEM Windows license that the laptops come with) and manually uninstall and change the configuration in order to bring it to our baseline config. I know that there are ways to create an image that gets copied to the hard drive with a specific configuration and with specific software installed (thats what OEMs do right?). I'm looking for a tool or a tutorial or something that explains as simply as possible how to create such an image. Thanks a lot

  Read the article

• Accessing IPv6 router interface from a minimal Fedora installation?

  - by Zack

  I've recently installed Fedora 16 and am trying to set up a simple apache server. The only problem I've run into so far is that I'm unable to access my router's web interface from any box on my network. It assigns addresses via dhcp, and the router always responds to a ping. The server is also picking up an IP from the router on the proper subnet. Now, all I really need to do is forward a port, however I am receiving "Unable to connect" through the web interfaces and "connection refused" via telnet. What are my options, and how might I go about troubleshooting this? Will I need the server's ip to be static in order to change these settings? The router is a "Netopia" model, if that helps.

  Read the article

• Lock down SFTP access on OpenSolaris

  - by Simon

  Hi all, I have an OpenSolaris 2009.06 server and I'd like to enable a user to remotely change files in a specific directory, ideally via SFTP or FTP-via-SSH. This user does not yet have an account on the machine and I'd like to create it so it's as restricted as possible. Is there a canonical way of doing this? I know about OpenSolaris' role-based access control and authorizations model, but I figure it's a lot of work (i.e., a lot I can mess up) to really lock down a full-blown user account (prevent fork bombs, make sure there's really no other file in the file system which can be written to...). Any hint is greatly appreciated. Thanks, Simon

  Read the article

• DHCP lease time in DrayTek Vigor 2600 Plus

  - by Nelson Reis

  I'm having some problems with my ADSL router DrayTek Vigor 2600 Plus. After a few days and some people connecting to it, it stops assigning IP addresses to new people that tries to connect. I was hoping that reducing the DHCP lease time could improve something. Anyone knows how can I change that in this model? I was also looking for the user guide on the internet, but couldn't find it anywhere. It would be great if someone points me to the pdf.

  Read the article

• Ubuntu Remix on Acer Aspire One Netbook keeps freezing

  - by user7553

  It came with a Windows XP installation and I just couldn't deal with the screen constantly blacking out. Later on I found out they designed a specific key on this netbook for it. Anyways I installed Ubuntu Remix and it fixed it. However a lot of bad things are happening now. 1) If I want a long video or lots of music it will lockup after an hour. 2) Plugging it to an external monitor for more then 1 hour will black out. 3) Constantly running fsck after a lockup and then I lose nodes / fragments and what not :( I am really not sure what to do, both blacking out and lockups really mess my hard drive up. I have to manually run fsck every time it happens. My gf has the same kind of netboot w/ Remix (not the same model number) and it runs perfectly fine on hers. Except for skype eating up all her CPU.

  Read the article

• scanning only works under "sudo" (Ubuntu)

  - by JoelFan

  When I try to scan, using simple-scan, the UI says Failed to scan -- Unable to connect to scanner. When I run it from the command line I get: joel@home:/usr/bin$ simple-scan -d ** (simple-scan:6554): DEBUG: Starting Simple Scan 2.32.0.1, PID=6554 ** (simple-scan:6554): DEBUG: Restoring window to 600x400 pixels ** (simple-scan:6554): DEBUG: sane_init () -> SANE_STATUS_GOOD ** (simple-scan:6554): DEBUG: SANE version 1.0.22 ** (simple-scan:6554): DEBUG: Requesting redetection of scan devices ** (simple-scan:6554): DEBUG: Processing request ** (simple-scan:6554): DEBUG: Requesting scan at 300 dpi from device '(null)' ** (simple-scan:6554): DEBUG: scanner_scan ("(null)", 300, SCAN_SINGLE) ** (simple-scan:6554): DEBUG: sane_get_devices () -> SANE_STATUS_GOOD ** (simple-scan:6554): DEBUG: Device: name="brother2:bus4;dev1" vendor="Brother" model="MFC-210C" type="USB scanner" ** (simple-scan:6554): DEBUG: Processing request ** (simple-scan:6554): DEBUG: sane_open ("brother2:bus4;dev1") -> SANE_STATUS_IO_ERROR ** (simple-scan:6554): WARNING **: Unable to get open device: Error during device I/O FYI, I have already done: joel@home:~$ sudo chmod a+rwx /dev/bus/usb joel@home:~$ sudo chmod a+rwx /dev/bus/usb/* If I run under sudo: joel@home:~$ sudo simple-scan it works. How can I get simple-scan to work without sudo?

  Read the article

• Using Zebra LP 2844-Z over the network

  - by Jason Kealey

  Hello, I am looking for a network-based label printer. I am looking at this Zebra LP-2844-Z printer. Unfortunately, it does not come with a network interface like the lower-end LP 2824 Plus. The ZebraNet 10/100 Print Server is both expensive for what it does (~$600) and only seems to support wireless networking, not wired. I prefer wired for reliability. Questions: Can I use a cheaper off-the-shelf print server to turn the LP-2844Z to a network printer. Would I get any trouble communicating with the printer via its own programming language or via OPOS? (instead of the Windows driver) Are cheaper print servers reliable? Would I be better to get another printer model that has it built in directly to avoid having issues due to the print server? What other printer would you recommend?

  Read the article

• slow network in centos5 VM with centos5 host running KVM

  - by dan

  I setup KVM following the guide here: http://www.cyberciti.biz/faq/centos-rhel-linux-kvm-virtulization-tutorial/ I setup a bridged network and it worked fine except that the transfer speed is 200KB/s instead of the gigabit speed that I get on the host machine by itself. I tried editing the guest network settings to set "model=virtio" http://wiki.libvirt.org/page/Virtio but this just moves ifconfig-eth0 to ifconfig-eth0.bak in the VM and networking doesn't work at all. I tried moving ifconfig-eth0 back and starting up eth0, which works, but now the transfer speed is ~ 60KB/s I have no idea what else to try. Any suggestions would be greatly appreciated.

  Read the article

• How can I change the amount of video memory with a Mobile Intel 4 Series Express Chipset?

  - by user45924

  I have the chipset in the title. The Intel control panel says the following: Intel® Graphics Media Accelerator Driver for Mobile Report Report Date: 8/11/2010 Report Time[hr:mm:ss]: 20:2:54 Driver Version: 8.15.10.2182 Operating System: Windows 7 (6.1.7600) Default Language: English (Canada) DirectX* Version: 10.0 Physical Memory: 3963 MB Minimum Graphics Memory: 128 MB Maximum Graphics Memory: 1759 MB Graphics Memory in Use: 17 MB Processor: Intel64 Family 6 Model 23 Stepping 10 Processor Speed: 1995 MHz Vendor ID: 8086 Device ID: 2A42 Device Revision: 07 Even while playing games, the Graphics Memory in Use only ever goes up to 26 MB. I've looked in the BIOS; there's nothing there. Is there any way I can force it to go higher? Thanks :)

  Read the article

< Previous Page | 318 319 320 321 322 323 324 325 326 327 328 329  | Next Page >