general news - Page 322

Can I install Ubuntu 13.10 without the internet?

- by user1526570

I'm new to Ubuntu and Linux in general. I'm currently out of town and the dorm I am living in has terrible internet connection. It won't be another 2-3 weeks before I can go home and have proper internet connection. So my question is whether or not I can install Ubuntu 13.10 in my laptop without the internet and then do the updates once I go home? Also, I'm attempting to do a dual boot with my Lenovo G505s which was pre-installed with Windows 8. Hopefully I can pull this off. I already did the necessary things (I think and hope so) prior to installation: Disable secure boot Enable legacy and boot UEFI first Create partition Put installer in my pen drive As I am quite new to this, any advice would be of great help. Thanks in advance! EDIT: I tried yesterday. The installation asked me to connect to the internet, so I used my crappy dorm internet. When it reached the downloading/installtion of Ubuntu One, it just stopped and went on forever. So I had to stop it.

Read the article

Autojump in 12.04 doesn't work

- by hnasarat

https://launchpad.net/ubuntu/+source/autojump I installed with apt-get, checked out the man page and added . /usr/share/autojump/autojump.sh to my .bashrc, like it says. When I cd around the filesystem, nothing gets added to ~/.local/share/autojump. I then tried adding . /usr/share/autojump/autojump.bash, but that didn't work either. autojump -a ~/Dropbox properly creates a file ~/.local/share/autojump/autojump.txt, but running j Drop < TAB > doesn't autocomplete to j ~/Dropbox/ as it should. However, j < TAB > does autocomplete to j ~/Dropbox. I know my bash-completion is working since it works for git, dd, and others. I know there's a newer version in the repositories set for Quantal. Perhaps that would work? I don't know how to install that version though. I've used autojump with mac homebrew (and it installed without any issue), so I know there is missing functionality. In general I'm really annoyed that I can't get this working...I've spent hours on it! Needless to say, help would be very appreciated.

Read the article

Web Host which provides Latex and embedded programming [duplicate]

- by Polymer

This question already has an answer here: How to find web hosting that meets my requirements? 5 answers Hopefully this is a reasonable place to ask this question. I'll confess I'm a little green when it comes to web programming and websites in general (though not programming). I'm a Math and Physics person. I want to make a personal webpage containing a Math and Physics blog. Ideally the blog should support latex, and embedded programs. This would allow me to write, say, an equation for an orbit and then show what the orbit would look like (perhaps letting the reader configure parameters). The programming language can be javascript (though it isn't my favorite language). My budget is around 5 dollars a month. Does anybody have suggestions for a good Shared host with these kind of requirements? And a small aside, It would be useful if I can move the website content, since I might live at a university in the nearish future. They would have servers which could support such a webpage.

Read the article

data validation on wpf passwordbox:type password, re-type password

- by black sensei

Hello Experts !! I've built a wpf windows application in with there is a registration form. Using IDataErrorInfo i could successfully bind the field to a class property and with the help of styles display meaningful information about the error to users.About the submit button i use the MultiDataTrigger with conditions (Based on a post here on stackoverflow).All went well. Now i need to do the same for the passwordbox and apparently it's not as straight forward.I found on wpftutorial an article and gave it a try but for some reason it wasn't working. i've tried another one from functionalfun. And in this Functionalfun case the properties(databind,databound) are not recognized as dependencyproperty even after i've changed their name as suggested somewhere in the comments plus i don't have an idea whether it will work for a windows application, since it's designed for web. to give you an idea here is some code on textboxes <Window.Resources> <data:General x:Key="recharge" /> <Style x:Key="validButton" TargetType="{x:Type Button}" BasedOn="{StaticResource {x:Type Button}}" > <Setter Property="IsEnabled" Value="False"/> <Style.Triggers> <MultiDataTrigger> <MultiDataTrigger.Conditions> <Condition Binding="{Binding ElementName=txtRecharge, Path=(Validation.HasError)}" Value="false" /> </MultiDataTrigger.Conditions> <Setter Property="IsEnabled" Value="True" /> </MultiDataTrigger> </Style.Triggers> </Style> <Style x:Key="txtboxerrors" TargetType="{x:Type TextBox}" BasedOn="{StaticResource {x:Type TextBox}}"> <Style.Triggers> <Trigger Property="Validation.HasError" Value="true"> <Setter Property="ToolTip" Value="{Binding RelativeSource={RelativeSource Self}, Path=(Validation.Errors)[0].ErrorContent}"/> <Setter Property="Validation.ErrorTemplate"> <Setter.Value> <ControlTemplate> <DockPanel LastChildFill="True"> <TextBlock DockPanel.Dock="Bottom" FontSize="8" FontWeight="ExtraBold" Foreground="red" Padding="5 0 0 0" Text="{Binding ElementName=showerror, Path=AdornedElement.(Validation.Errors)[0].ErrorContent}"></TextBlock> <Border BorderBrush="Red" BorderThickness="2"> <AdornedElementPlaceholder Name="showerror" /> </Border> </DockPanel> </ControlTemplate> </Setter.Value> </Setter> </Trigger> </Style.Triggers> </Style> </Window.Resources> <TextBox Margin="12,69,12,70" Name="txtRecharge" Style="{StaticResource txtboxerrors}"> <TextBox.Text> <Binding Path="Field" Source="{StaticResource recharge}" ValidatesOnDataErrors="True" UpdateSourceTrigger="PropertyChanged"> <Binding.ValidationRules> <ExceptionValidationRule /> </Binding.ValidationRules> </Binding> </TextBox.Text> </TextBox> <Button Height="23" Margin="98,0,0,12" Name="btnRecharge" VerticalAlignment="Bottom" Click="btnRecharge_Click" HorizontalAlignment="Left" Width="75" Style="{StaticResource validButton}">Recharge</Button> some C# : class General : IDataErrorInfo { private string _field; public string this[string columnName] { get { string result = null; if(columnName == "Field") { if(Util.NullOrEmtpyCheck(this._field)) { result = "Field cannot be Empty"; } } return result; } } public string Error { get { return null; } } public string Field { get { return _field; } set { _field = value; } } } So what are suggestion you guys have for me? I mean how would you go about this? how do you do this since the databinding first purpose here is not to load data onto the fields they are just (for now) for data validation. thanks for reading this.

Read the article

403 error after adding javascript to masterpage for sharepoint.

- by Jeremy

I am attempting to add highslide-with-html.js from http://highslide.com/ to my masterpage. I am receiving a 403 forbidden error when I use the provided masterpage. I have placed it in C:\Program Files\Common Files\Microsoft Shared\web server extensions\12\TEMPLATE\LAYOUTS\1033. Test javascript files such as pirate.js which consists solely of alert("Arr!"); have loaded from the same directory. I have provided the code for the masterpage. When I do not reference the problem javascript file there is no 403 error. <%@ Master language="C#" %> <!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd"> <%@ Import Namespace="Microsoft.SharePoint" %> <%@ Register Tagprefix="SPSWC" Namespace="Microsoft.SharePoint.Portal.WebControls" Assembly="Microsoft.SharePoint.Portal, Version=12.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %> <%@ Register Tagprefix="SharePoint" Namespace="Microsoft.SharePoint.WebControls" Assembly="Microsoft.SharePoint, Version=12.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %> <%@ Register Tagprefix="WebPartPages" Namespace="Microsoft.SharePoint.WebPartPages" Assembly="Microsoft.SharePoint, Version=12.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %> <%@ Register Tagprefix="PublishingWebControls" Namespace="Microsoft.SharePoint.Publishing.WebControls" Assembly="Microsoft.SharePoint.Publishing, Version=12.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %> <%@ Register Tagprefix="PublishingNavigation" Namespace="Microsoft.SharePoint.Publishing.Navigation" Assembly="Microsoft.SharePoint.Publishing, Version=12.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %> <%@ Register TagPrefix="wssuc" TagName="Welcome" src="~/_controltemplates/Welcome.ascx" %> <%@ Register TagPrefix="wssuc" TagName="DesignModeConsole" src="~/_controltemplates/DesignModeConsole.ascx" %> <%@ Register TagPrefix="PublishingVariations" TagName="VariationsLabelMenu" src="~/_controltemplates/VariationsLabelMenu.ascx" %> <%@ Register Tagprefix="PublishingConsole" TagName="Console" src="~/_controltemplates/PublishingConsole.ascx" %> <%@ Register TagPrefix="PublishingSiteAction" TagName="SiteActionMenu" src="~/_controltemplates/PublishingActionMenu.ascx" %> <html dir="<%$Resources:wss, multipages_direction_dir_value %>" runat="server" __expr-val-dir="ltr"> <head runat="server"> <meta name="GENERATOR" content="Microsoft SharePoint"> <meta http-equiv="Content-Type" content="text/html; charset=utf-8"> <meta http-equiv="Expires" content="0"> <SharePoint:RobotsMetaTag runat="server" __designer:Preview="" __designer:Values="<P N='InDesign' T='False' /><P N='ID' T='ctl00' /><P N='Page' ID='1' /><P N='TemplateControl' ID='2' /><P N='AppRelativeTemplateSourceDirectory' R='-1' />"/> <title id="onetidTitle"> <asp:ContentPlaceHolder id="PlaceHolderPageTitle" runat="server"/> </title> <Sharepoint:CssLink runat="server" __designer:Preview="<link rel="stylesheet" type="text/css" href="/Style%20Library/en-US/Core%20Styles/Band.css"/> <link rel="stylesheet" type="text/css" href="/Style%20Library/en-US/Core%20Styles/controls.css"/> <link rel="stylesheet" type="text/css" href="/Style%20Library/zz1_blue.css"/> <link rel="stylesheet" type="text/css" href="/_layouts/1033/styles/core.css"/> " __designer:Values="<P N='InDesign' T='False' /><P N='ID' T='ctl01' /><P N='Page' ID='1' /><P N='TemplateControl' ID='2' /><P N='AppRelativeTemplateSourceDirectory' R='-1' />"/>  <SharePoint:CssRegistration name="<% $SPUrl:~SiteCollection/Style Library/~language/Core Styles/Band.css%>" runat="server" __designer:Preview="<link rel="stylesheet" type="text/css" href="/Style%20Library/en-US/Core%20Styles/Band.css"/> " __designer:Values="<P N='Name' Bound='True' T='SPUrl:~SiteCollection/Style Library/~language/Core Styles/Band.css' /><P N='InDesign' T='False' /><P N='ID' T='ctl02' /><P N='Page' ID='1' /><P N='TemplateControl' ID='2' /><P N='AppRelativeTemplateSourceDirectory' R='-1' />"/> <SharePoint:CssRegistration name="<% $SPUrl:~sitecollection/Style Library/~language/Core Styles/controls.css %>" runat="server" __designer:Preview="<link rel="stylesheet" type="text/css" href="/Style%20Library/en-US/Core%20Styles/controls.css"/> " __designer:Values="<P N='Name' Bound='True' T='SPUrl:~sitecollection/Style Library/~language/Core Styles/controls.css' /><P N='InDesign' T='False' /><P N='ID' T='ctl03' /><P N='Page' ID='1' /><P N='TemplateControl' ID='2' /><P N='AppRelativeTemplateSourceDirectory' R='-1' />"/> <SharePoint:CssRegistration name="<% $SPUrl:~SiteCollection/Style Library/zz1_blue.css%>" runat="server" __designer:Preview="<link rel="stylesheet" type="text/css" href="/Style%20Library/zz1_blue.css"/> " __designer:Values="<P N='Name' Bound='True' T='SPUrl:~SiteCollection/Style Library/zz1_blue.css' /><P N='InDesign' T='False' /><P N='ID' T='ctl04' /><P N='Page' ID='1' /><P N='TemplateControl' ID='2' /><P N='AppRelativeTemplateSourceDirectory' R='-1' />"/> <SharePoint:ScriptLink name="init.js" runat="server" __designer:Preview="<script src="/_layouts/1033/init.js?rev=VhAxGc3rkK79RM90tibDzw%3D%3D"></script> " __designer:Values="<P N='Name' T='init.js' /><P N='InDesign' T='False' /><P N='ID' T='ctl05' /><P N='Page' ID='1' /><P N='TemplateControl' ID='2' /><P N='AppRelativeTemplateSourceDirectory' R='-1' />"/> <SharePoint:ScriptLink Name="highslide-with-html.js" runat="server" __designer:Error="Access to the path 'C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\Template\layouts\1033\highslide-with-html.js' is denied."/>  <asp:ContentPlaceHolder id="PlaceHolderAdditionalPageHead" runat="server"/> </head> <body class="body" onload="javascript:_spBodyOnLoadWrapper();"> <WebPartPages:SPWebPartManager runat="server"/> <form runat="server" onsubmit="return _spFormOnSubmitWrapper();"> <table cellpadding="0" cellspacing="0" class="master"> <tr> <td height="100%" class="shadowLeft"> <div class="spacer"> </div> </td> <td valign="top"> <table cellpadding="0" cellspacing="0" width="100%" class="masterContent"> <tr style="height:0px"><td> <wssuc:DesignModeConsole id="IdDesignModeConsole" runat="server" __designer:Preview="<span __designer:NonVisual="true">[ DesignModeConsoleContainer "DesignModeContainer" ]</span> " __designer:Values="<P N='ID' ID='1' T='IdDesignModeConsole' /><P N='TemplateControl' R='0' />"/></td></tr> <tr> <td colspan="2" class="authoringRegion"> <span class="siteActionMenu"> <PublishingSiteAction:SiteActionMenu runat="server" __designer:Preview="  <table height=100% class="ms-siteaction" cellpadding=0 cellspacing=0> <tr> <td class="ms-siteactionsmenu" id="siteactiontd"> <span style="display:none"><menu type='ServerMenu' id="zz1_SiteActionsMenuMain" largeIconMode="true"><ie:menuitem id="zz2_MenuItem_Create" type="option" iconSrc="/_layouts/images/Actionscreate.gif" onMenuClick="window.location = '/_layouts/create.aspx';" menuGroupId="100"></ie:menuitem><ie:menuitem id="zz3_MenuItem_Settings" type="option" iconSrc="/_layouts/images/ActionsSettings.gif" onMenuClick="window.location = '/_layouts/settings.aspx';" menuGroupId="100"></ie:menuitem></menu></span><div><div><span title="Open Menu"><div id="zz4_SiteActionsMenu_t" class="" onmouseover="MMU_PopMenuIfShowing(this);MMU_EcbTableMouseOverOut(this, true)" hoverActive="ms-siteactionsmenuhover" hoverInactive="" onclick=" MMU_Open(byid(''), MMU_GetMenuFromClientId('zz4_SiteActionsMenu'),event,false, null, 0);" foa="MMU_GetMenuFromClientId('zz4_SiteActionsMenu')" oncontextmenu="this.click(); return false;" nowrap="nowrap"><a id="zz4_SiteActionsMenu" accesskey="/" href="#" onclick="javascript:return false;" style="cursor:pointer;white-space:nowrap;" onfocus="MMU_EcbLinkOnFocusBlur(byid(''), this, true);" onkeydown="MMU_EcbLinkOnKeyDown(byid(''), MMU_GetMenuFromClientId('zz4_SiteActionsMenu'), event);" onclick=" MMU_Open(byid(''), MMU_GetMenuFromClientId('zz4_SiteActionsMenu'),event,false, null, 0);" oncontextmenu="this.click(); return false;" menuTokenValues="MENUCLIENTID=zz4_SiteActionsMenu,TEMPLATECLIENTID=zz1_SiteActionsMenuMain" serverclientid="zz4_SiteActionsMenu">Site Actions<img src="/_layouts/images/blank.gif" border="0" alt="Use SHIFT+ENTER to open the menu (new window)."/></a><img align="absbottom" src="/_layouts/images/whitearrow.gif" alt="" /></div></span></div></div> </td> </tr> </table>  " __designer:Values="<P N='TemplateControl' R='0' />"/> </span> <div class="sharepointLogin">  <table cellpadding="0" cellspacing="0" > <tr> <td class="ms-globallinks"> <SharePoint:DelegateControl ControlId="GlobalSiteLink1" Scope="Farm" runat="server" __designer:Preview="<span style='padding-left:3px'></span> <a id="ctl00_ctl09_hlMySite" href="http://litwaredemo:80/MySite/_layouts/MySite.aspx">My Site</a> <span style='padding-left:4px;padding-right:3px'>|</span> " __designer:Values="<P N='ControlId' T='GlobalSiteLink1' /><P N='Scope' T='Farm' /><P N='ID' T='ctl08' /><P N='Page' ID='1' /><P N='TemplateControl' ID='2' /><P N='AppRelativeTemplateSourceDirectory' R='-1' />"/></td> <td class="ms-globallinks"> <SharePoint:DelegateControl ControlId="GlobalSiteLink2" Scope="Farm" runat="server" __designer:Preview="<span id="ctl00_ctl11_MyLinksMenu"><span style="display:none"><menu type='ServerMenu' id="ctl00_ctl11_MyLinksMenuMenuTemplate" largeIconMode="true"></menu></span><span title="Open Menu"><span id="ctl00_ctl11_MyLinksMenuMenu_t" class="ms-SPLink ms-hovercellinactive" onmouseover="MMU_PopMenuIfShowing(this);MMU_EcbTableMouseOverOut(this, true)" hoverActive="ms-SPLink ms-hovercellactive" hoverInactive="ms-SPLink ms-hovercellinactive" onclick="javascript:FetchCallbackMenuItems(&#39;ctl00_ctl11_MyLinksMenuMenuTemplate&#39;); MMU_Open(byid('ctl00_ctl11_MyLinksMenuMenuTemplate'), MMU_GetMenuFromClientId('ctl00_ctl11_MyLinksMenuMenu'),event,true, null, 0);" foa="MMU_GetMenuFromClientId('ctl00_ctl11_MyLinksMenuMenu')" oncontextmenu="this.click(); return false;" nowrap="nowrap"><a id="ctl00_ctl11_MyLinksMenuMenu" accesskey="M" href="#" onclick="javascript:return false;" style="cursor:pointer;white-space:nowrap;" onfocus="MMU_EcbLinkOnFocusBlur(byid('ctl00_ctl11_MyLinksMenuMenuTemplate'), this, true);" onkeydown="MMU_EcbLinkOnKeyDown(byid('ctl00_ctl11_MyLinksMenuMenuTemplate'), MMU_GetMenuFromClientId('ctl00_ctl11_MyLinksMenuMenu'), event);" onclick="javascript:FetchCallbackMenuItems(&#39;ctl00_ctl11_MyLinksMenuMenuTemplate&#39;); MMU_Open(byid('ctl00_ctl11_MyLinksMenuMenuTemplate'), MMU_GetMenuFromClientId('ctl00_ctl11_MyLinksMenuMenu'),event,true, null, 0);" oncontextmenu="this.click(); return false;" menuTokenValues="MENUCLIENTID=ctl00_ctl11_MyLinksMenuMenu,TEMPLATECLIENTID=ctl00_ctl11_MyLinksMenuMenuTemplate" serverclientid="ctl00_ctl11_MyLinksMenuMenu">My Links<img src="/_layouts/images/blank.gif" border="0" alt="Use SHIFT+ENTER to open the menu (new window)."/></a><img align="absbottom" src="/_layouts/images/menudark.gif" alt="" /></span></span></span>|" __designer:Values="<P N='ControlId' T='GlobalSiteLink2' /><P N='Scope' T='Farm' /><P N='ID' T='ctl10' /><P N='Page' ID='1' /><P N='TemplateControl' ID='2' /><P N='AppRelativeTemplateSourceDirectory' R='-1' />"/></td> <td class="ms-globallinks"> <wssuc:Welcome id="explitLogout" runat="server" __designer:Preview=" <span style="display:none"><menu type='ServerMenu' id="zz5_ID_PersonalActionMenu" largeIconMode="true"><ie:menuitem id="zz6_ID_PersonalInformation" type="option" iconSrc="/_layouts/images/menuprofile.gif" onMenuClick="javascript:GoToPage('\u002f_layouts\u002fuserdisp.aspx?Force=True\u0026ID=' + _spUserId);return false;" menuGroupId="100"></ie:menuitem><ie:menuitem id="zz7_ID_LoginAsDifferentUser" type="option" onMenuClick="javascript:LoginAsAnother('\u002f_layouts\u002fAccessDenied.aspx?loginasanotheruser=true', 0)" menuGroupId="200"></ie:menuitem><ie:menuitem id="zz8_ID_RequestAccess" type="option" onMenuClick="window.location = '/_layouts/reqacc.aspx?type=list&amp;name=%7B36F0105B%2D0F8E%2D4A22%2DBE90%2D716A51E97B5D%7D';" menuGroupId="200"></ie:menuitem><ie:menuitem id="zz9_ID_Logout" type="option" onMenuClick="window.location = '/_layouts/SignOut.aspx';" menuGroupId="200"></ie:menuitem></menu></span><span title="Open Menu"><div id="zz10_Menu_t" class="ms-SPLink ms-SpLinkButtonInActive" onmouseover="MMU_PopMenuIfShowing(this);MMU_EcbTableMouseOverOut(this, true)" hoverActive="ms-SPLink ms-SpLinkButtonActive" hoverInactive="ms-SPLink ms-SpLinkButtonInActive" onclick=" MMU_Open(byid(''), MMU_GetMenuFromClientId('zz10_Menu'),event,false, null, 0);" foa="MMU_GetMenuFromClientId('zz10_Menu')" oncontextmenu="this.click(); return false;" nowrap="nowrap"><a id="zz10_Menu" accesskey="L" href="#" onclick="javascript:return false;" style="cursor:pointer;white-space:nowrap;" onfocus="MMU_EcbLinkOnFocusBlur(byid(''), this, true);" onkeydown="MMU_EcbLinkOnKeyDown(byid(''), MMU_GetMenuFromClientId('zz10_Menu'), event);" onclick=" MMU_Open(byid(''), MMU_GetMenuFromClientId('zz10_Menu'),event,false, null, 0);" oncontextmenu="this.click(); return false;" menuTokenValues="MENUCLIENTID=zz10_Menu,TEMPLATECLIENTID=zz5_ID_PersonalActionMenu" serverclientid="zz10_Menu">Welcome LitwareInc Administrator<img src="/_layouts/images/blank.gif" border="0" alt="Use SHIFT+ENTER to open the menu (new window)."/></a><img align="absbottom" src="/_layouts/images/menudark.gif" alt="" /></div></span><script type="text/javascript" language="javascript">var _spUserId=1;</script> <a id="explitLogout_ExplicitLogin" Href="_controltemplates/http://litwaredemo/_layouts/Authenticate.aspx" style="display:none">Sign In</a> " __designer:Values="<P N='ID' ID='1' T='explitLogout' /><P N='TemplateControl' R='0' />"/></td> </tr> </table> </div> <div class="console"> <PublishingConsole:Console runat="server" __designer:Preview="  <span id="ctl00_publishingContext1"></span> <script type="text/javascript" language="javascript">if (document.getElementById('mpdmconsole')) { ShowConsoleBlockPaddingWithOverhang('mpLeftBackPadding', 'mpRightBackPadding', 'masterPageLeftOverhang', 'masterPageRightOverhang'); } </script>  " __designer:Values="<P N='TemplateControl' R='0' />"/> </div> </td> </tr> <tr> <td colspan="2" > <table cellpadding="0" cellspacing="0" width="100%"> <tr> <td colspan="4" class="topArea"> <SharePoint:AspMenu ID="logoLinkId" runat="server" DataSourceID="SiteMapDataSourceRoot" StaticDisplayLevels="1" MaximumDynamicDisplayLevels="0" AccessKey="1" CssClass="logo" __designer:Preview="<table id="zz12_logoLinkId" class="logo" cellpadding="0" cellspacing="0" border="0"> <tr id="zz12_logoLinkIdn0"> <td><table cellpadding="0" cellspacing="0" border="0" width="100%"> <tr> <td style="white-space:nowrap;width:100%;"><a Href="/Pages/Default.aspx" accesskey="1" style="text-decoration:none;">Home</a></td> </tr> </table></td> </tr> </table>" __designer:Values="<P N='ID' T='logoLinkId' /><P N='MaximumDynamicDisplayLevels' T='0' /><P N='DataSourceID' T='SiteMapDataSourceRoot' /><P N='AccessKey' T='1' /><P N='ControlStyle'><P N='CssClass' ID='1' T='logo' /><P N='Font' ID='2' /><P N='IsEmpty' T='False' /></P><P N='CssClass' R='1' /><P N='Font' R='2' /><P N='Page' ID='3' /><P N='TemplateControl' ID='4' /><P N='AppRelativeTemplateSourceDirectory' R='-1' />" __designer:Templates="<Group Name="Item Templates"><Template Name="StaticItemTemplate" Flags="D" Content="" /><Template Name="DynamicItemTemplate" Flags="D" Content="" /></Group>"/> <PublishingNavigation:PortalSiteMapDataSource ID="SiteMapDataSourceRoot" Runat="server" SiteMapProvider="CombinedNavSiteMapProvider" EnableViewState="true" StartFromCurrentNode="true" StartingNodeOffset="0" ShowStartingNode="true" __designer:Preview="<table cellpadding=4 cellspacing=0 style="font:messagebox;color:buttontext;background-color:buttonface;border: solid 1px;border-top-color:buttonhighlight;border-left-color:buttonhighlight;border-bottom-color:buttonshadow;border-right-color:buttonshadow"> <tr><td nowrap><span style="font-weight:bold">PortalSiteMapDataSource</span> - SiteMapDataSourceRoot</td></tr> <tr><td></td></tr> </table>" __designer:Values="<P N='ID' T='SiteMapDataSourceRoot' /><P N='SiteMapProvider' T='CombinedNavSiteMapProvider' /><P N='StartFromCurrentNode' T='True' /><P N='Page' ID='1' /><P N='TemplateControl' ID='2' /><P N='AppRelativeTemplateSourceDirectory' R='-1' />"/> <div class="topLinkBar"> <div class="topLink"> <PublishingVariations:VariationsLabelMenu id="labelmenu1" runat="server" __designer:Preview="<span __designer:NonVisual="true"><table cellpadding=4 cellspacing=0 style="font:messagebox;color:buttontext;background-color:buttonface;border: solid 1px;border-top-color:buttonhighlight;border-left-color:buttonhighlight;border-bottom-color:buttonshadow;border-right-color:buttonshadow"> <tr><td nowrap><span style="font-weight:bold">VariationDataSource</span> - LabelMenuDataSource</td></tr> <tr><td></td></tr> </table></span> " __designer:Values="<P N='ID' ID='1' T='labelmenu1' /><P N='TemplateControl' R='0' />"/> </div> </div> </td> </tr> <tr class="topNavContainer"> <td class="topNavRoundLeft"> <div class="glassSpacerLeft" /> </td> <td valign="top" width="100%"> <SharePoint:AspMenu ID="GlobalNav" Runat="server" DataSourceID="SiteMapDataSource1" Orientation="Horizontal" StaticDisplayLevels="1" MaximumDynamicDisplayLevels="1" StaticSubMenuIndent="0" DynamicHorizontalOffset="0" DynamicVerticalOffset="-8" StaticEnableDefaultPopOutImage="false" ItemWrap="false" SkipLinkText="<%$Resources:cms,masterpages_skiplinktext%>" CssClass="topNav" __designer:Preview="<table id="zz13_GlobalNav" class="topNav" cellpadding="0" cellspacing="0" border="0"> <tr> <td title="Document Center site" id="zz13_GlobalNavn0"><table class="topNavItem" cellpadding="0" cellspacing="0" border="0" width="100%"> <tr> <td style="white-space:nowrap;"><a class="topNavItem" Href="/Docs" style="text-decoration:none;border-style:none;">Document Center</a></td> </tr> </table></td><td style="width:0px;"></td><td style="width:0px;"></td><td title="Company News Home" id="zz13_GlobalNavn1"><table class="topNavItem" cellpadding="0" cellspacing="0" border="0" width="100%"> <tr> <td style="white-space:nowrap;"><a class="topNavItem" Href="/News/Pages/Default.aspx" style="text-decoration:none;border-style:none;">News</a></td> </tr> </table></td><td style="width:0px;"></td><td style="width:0px;"></td><td title="Report Center" id="zz13_GlobalNavn2"><table class="topNavItem" cellpadding="0" cellspacing="0" border="0" width="100%"> <tr> <td style="white-space:nowrap;"><a class="topNavItem" Href="/Reports/Pages/Default.aspx" style="text-decoration:none;border-style:none;">Reports</a></td> </tr> </table></td><td style="width:0px;"></td><td style="width:0px;"></td><td title="The Search Center displays search results" id="zz13_GlobalNavn3"><table class="topNavItem" cellpadding="0" cellspacing="0" border="0" width="100%"> <tr> <td style="white-space:nowrap;"><a class="topNavItem" Href="/SearchCenter/Pages/default.aspx" style="text-decoration:none;border-style:none;">Search</a></td> </tr> </table></td><td style="width:0px;"></td><td style="width:0px;"></td><td title="Site Directory web" id="zz13_GlobalNavn4"><table class="topNavItem" cellpadding="0" cellspacing="0" border="0" width="100%"> <tr> <td style="white-space:nowrap;"><a class="topNavItem" Href="/SiteDirectory/Pages/category.aspx" style="text-decoration:none;border-style:none;">Sites</a></td> </tr> </table></td><td style="width:0px;"></td> </tr> </table>" __designer:Values="<P N='ID' T='GlobalNav' /><P N='DynamicHoverStyle'><P N='CssClass' T='topNavFlyOutsHover' /><P N='IsEmpty' T='False' /></P><P N='DynamicMenuItemStyle'><P N='CssClass' T='topNavFlyOutsItem' /><P N='IsEmpty' T='False' /></P><P N='DynamicMenuStyle'><P N='CssClass' T='topNavFlyOuts' /><P N='IsEmpty' T='False' /></P><P N='DynamicVerticalOffset' T='-8' /><P N='MaximumDynamicDisplayLevels' T='1' /><P N='Orientation' E='0' /><P N='SkipLinkText' Bound='True' T='Resources:cms,masterpages_skiplinktext' /><P N='StaticEnableDefaultPopOutImage' T='False' /><P N='StaticHoverStyle'><P N='CssClass' T='topNavHover' /><P N='IsEmpty' T='False' /></P><P N='StaticMenuItemStyle'><P N='CssClass' T='topNavItem' /><P N='ItemSpacing' T='0px' /><P N='IsEmpty' T='False' /></P><P N='StaticSelectedStyle'><P N='CssClass' T='topNavSelected' /><P N='ItemSpacing' T='0px' /><P N='IsEmpty' T='False' /></P><P N='StaticSubMenuIndent' T='0px' /><P N='DataSourceID' T='SiteMapDataSource1' /><P N='ControlStyle'><P N='CssClass' ID='1' T='topNav' /><P N='Font' ID='2' /><P N='IsEmpty' T='False' /></P><P N='CssClass' R='1' /><P N='Font' R='2' /><P N='Page' ID='3' /><P N='TemplateControl' ID='4' /><P N='AppRelativeTemplateSourceDirectory' R='-1' />" __designer:Templates="<Group Name="Item Templates"><Template Name="StaticItemTemplate" Flags="D" Content="" /><Template Name="DynamicItemTemplate" Flags="D" Content="" /></Group>"> <StaticMenuItemStyle CssClass="topNavItem" ItemSpacing="0"/> <StaticSelectedStyle CssClass="topNavSelected" ItemSpacing="0"/> <StaticHoverStyle CssClass="topNavHover"/> <DynamicMenuStyle CssClass="topNavFlyOuts" /> <DynamicMenuItemStyle CssClass="topNavFlyOutsItem" /> <DynamicHoverStyle CssClass="topNavFlyOutsHover"/> </SharePoint:AspMenu> <PublishingNavigation:PortalSiteMapDataSource ID="siteMapDataSource1" Runat="server" SiteMapProvider="CombinedNavSiteMapProvider" EnableViewState="true" StartFromCurrentNode="true" StartingNodeOffset="0" ShowStartingNode="false" TreatStartingNodeAsCurrent="true" TrimNonCurrentTypes="Heading" __designer:Preview="<table cellpadding=4 cellspacing=0 style="font:messagebox;color:buttontext;background-color:buttonface;border: solid 1px;border-top-color:buttonhighlight;border-left-color:buttonhighlight;border-bottom-color:buttonshadow;border-right-color:buttonshadow"> <tr><td nowrap><span style="font-weight:bold">PortalSiteMapDataSource</span> - siteMapDataSource1</td></tr> <tr><td></td></tr> </table>" __designer:Values="<P N='ID' T='siteMapDataSource1' /><P N='SiteMapProvider' T='CombinedNavSiteMapProvider' /><P N='StartFromCurrentNode' T='True' /><P N='ShowStartingNode' T='False' /><P N='TreatStartingNodeAsCurrent' T='True' /><P N='TrimNonCurrentTypes' E='32' /><P N='Page' ID='1' /><P N='TemplateControl' ID='2' /><P N='AppRelativeTemplateSourceDirectory' R='-1' />"/> </td> <td> <div class="search"> <asp:ContentPlaceHolder id="PlaceHolderSearchArea" runat="server"> <SPSWC:SearchBoxEx id="SearchBox" RegisterStyles="false" TextBeforeDropDown="" TextBeforeTextBox="<%$Resources:cms,masterpages_searchbox_label%>" TextBoxWidth="100" GoImageUrl="<% $SPUrl:~sitecollection/Style Library/Images/Search_Arrow.jpg %>" GoImageUrlRTL="<% $SPUrl:~sitecollection/Style Library/Images/Search_Arrow_RTL.jpg %>" UseSiteDefaults="true" DropDownMode = "HideScopeDD" SuppressWebPartChrome="true" runat="server" WebPart="true" __WebPartId="{7DECDCCA-FDA0-4739-8F0E-7B8DE48F0E0D}" __Preview="<table TOPLEVEL border="0" cellpadding="0" cellspacing="0" width="100%"> <tr> <td><table border="0" cellpadding="0" cellspacing="0" width="100%"> <tr class="ms-WPHeader"> <td title="" id="WebPart

Read the article

not able to write log file to specified path(Microsoft Enterprise Library Logging)

- by prince23

hi, i am trying to implement the logging Configuration using Microsoft Enterprise Library Logging class Program { static void Main(string[] args) { LogEntry entry = new LogEntry() { Message = "Hello Ent. Lib. Logging" }; Logger.Write(entry); } } here the entry conyain she details. but these details are not written in the file i web config i have the settings done like this. <?xml version="1.0" encoding="utf-8"?> <configuration> <configSections> <section name="loggingConfiguration" type="Microsoft.Practices.EnterpriseLibrary.Logging.Configuration.LoggingSettings, Microsoft.Practices.EnterpriseLibrary.Logging, Version=4.1.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" /> <section name="exceptionHandling" type="Microsoft.Practices.EnterpriseLibrary.ExceptionHandling.Configuration.ExceptionHandlingSettings, Microsoft.Practices.EnterpriseLibrary.ExceptionHandling, Version=4.1.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" /> <section name="dataConfiguration" type="Microsoft.Practices.EnterpriseLibrary.Data.Configuration.DatabaseSettings, Microsoft.Practices.EnterpriseLibrary.Data, Version=4.1.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" /> </configSections> <loggingConfiguration name="Logging Application Block" tracingEnabled="true" defaultCategory="General" logWarningsWhenNoCategoriesMatch="true"> <listeners> <add fileName="C:\Inetpub\wwwroot\trace.log" header="----------------------------------------" footer="----------------------------------------" formatter="" listenerDataType="Microsoft.Practices.EnterpriseLibrary.Logging.Configuration.FlatFileTraceListenerData, Microsoft.Practices.EnterpriseLibrary.Logging, Version=4.1.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" traceOutputOptions="None" filter="All" type="Microsoft.Practices.EnterpriseLibrary.Logging.TraceListeners.FlatFileTraceListener, Microsoft.Practices.EnterpriseLibrary.Logging, Version=4.1.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" name="FlatFile TraceListener" /> <add source="Enterprise Library Logging" formatter="Text Formatter" log="Application" machineName="" listenerDataType="Microsoft.Practices.EnterpriseLibrary.Logging.Configuration.FormattedEventLogTraceListenerData, Microsoft.Practices.EnterpriseLibrary.Logging, Version=4.1.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" traceOutputOptions="None" filter="All" type="Microsoft.Practices.EnterpriseLibrary.Logging.TraceListeners.FormattedEventLogTraceListener, Microsoft.Practices.EnterpriseLibrary.Logging, Version=4.1.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" name="Formatted EventLog TraceListener" /> </listeners> <formatters> <add template="Timestamp: {timestamp}
Message: {message}
Category: {category}
Priority: {priority}
EventId: {eventid}
Severity: {severity}
Title:{title}
Machine: {machine}
Application Domain: {appDomain}
Process Id: {processId}
Process Name: {processName}
Win32 Thread Id: {win32ThreadId}
Thread Name: {threadName}
Extended Properties: {dictionary({key} - {value}
)}" type="Microsoft.Practices.EnterpriseLibrary.Logging.Formatters.TextFormatter, Microsoft.Practices.EnterpriseLibrary.Logging, Version=4.1.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" name="Text Formatter" /> </formatters> <categorySources> <add switchValue="All" name="General"> <listeners> <add name="Formatted EventLog TraceListener" /> </listeners> </add> </categorySources> <specialSources> <allEvents switchValue="All" name="All Events" /> <notProcessed switchValue="All" name="Unprocessed Category" /> <errors switchValue="All" name="Logging Errors & Warnings"> <listeners> <add name="Formatted EventLog TraceListener" /> </listeners> </errors> </specialSources> </loggingConfiguration> <exceptionHandling> <exceptionPolicies> <add name="Exception Policy"> <exceptionTypes> <add type="System.Exception, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" postHandlingAction="NotifyRethrow" name="Exception" /> </exceptionTypes> </add> </exceptionPolicies> </exceptionHandling> </configuration> i am trying by best to solve this from past 2 days. if any one knw what is the issue here. why my log file is not written in the specified path. and even the details of log are not written in the file path fileName="C:\Inetpub\wwwroot\trace.log"

Read the article

How can I successfully dechiper Instruments Messages for iPhone Leak

- by dubbeat

Hi, I have a memory leak in my app. (This is the first of many I'm sure :() I've being trying to use Instruments to find it. Instruments gives me a lot of information but I think I must just not know how to use this information. What I did so far was 1) Run the app with Instruments 2) Memory Leak Occurs named general -stack 16 3) Find general - stack 16 in the object allocations part of instruments 4) The information here says the event type is a malloc, that webcore is responsible and the something named WKSetCurrentGraphicContext is the responsible caller. How can I use this given information to discover where in my code the leak is being caused? If I comment out the following function I don't get the leak warning so I guess it should be in there somewhere but I can't see where -(void)constructFeatured { NSString *imageName =[[NSString alloc] initWithFormat:@"%@%@%@",@"http://myweb/avatar_", featuredValueObject.featured_promo_artistid, @".jpg"]; NSURL *url = [NSURL URLWithString:imageName]; CGRect frame; frame.size.width=100; frame.size.height=100; frame.origin.x=20; frame.origin.y=39; [imageName release]; imageName=nil; SDWebImageManager *manager = [SDWebImageManager sharedManager]; UIImage *cachedImage = [manager imageWithURL:url]; if (cachedImage) { cachedImage =[ImageManipulator makeRoundCornerImage:cachedImage : 10 : 10]; UIImageView *avatarimageview = [[UIImageView alloc]initWithImage:cachedImage ]; avatarimageview.frame=frame; [self.view addSubview:avatarimageview]; UIView *spinny = [self.view viewWithTag:SPINNY_TAG]; [spinny removeFromSuperview]; [avatarimageview release]; } else { [manager downloadWithURL:url delegate:self]; } NSURL *url2 =[NSURL URLWithString:[NSString stringWithFormat:@"%@%@%@",@"http://myweb/", featuredValueObject.featured_promo_artistcountry , @".png"]]; CGRect flagframe; flagframe.size.width=16; flagframe.size.height=11; flagframe.origin.x=130; flagframe.origin.y=40; NSData* data = [[NSData alloc] initWithContentsOfURL:url2]; UIImage* img = [[UIImage alloc] initWithData:data]; UIImageView *imageflagview = [[UIImageView alloc] initWithImage: img]; imageflagview.frame=flagframe; [self.view addSubview:imageflagview]; [imageflagview release]; imageflagview=nil; [data release]; [img release]; [url release]; artistname =[[UILabel alloc]initWithFrame:CGRectMake(130,75, 200, 15)]; [artistname setFont:[UIFont fontWithName:@"Arial" size:(16.0)]]; artistname.backgroundColor= [UIColor clearColor]; artistname.textColor=[UIColor whiteColor]; artistname.text=featuredValueObject.featured_promo_artistname; [self.view addSubview:artistname]; [artistname release]; hasConstructedFeatured=YES; [featuredValueObject release]; featuredValueObject=nil; }

Read the article

Enteprise Library Exception Handling for WCF Fault Contracts - CLIENT SIDE

- by Huw

I have a Windows Service which communicates with WCF services. The WCF services are all fault shielded and generate custom UserFaultContracts and ServiceFaultContracts. No problems there. In the Windows Service I am using EntLib for exception handling and logging. I do not want to try catch for faults try { } catch (FaultException<UserFaultContract>) { } I want to use EntLib try { } catch (Exception ex) { var rethrow = ExceptionPolicy.HandleException(ex, "Transaction Policy"); if (rethrow) throw; } This also works, however, in my Tranasaction Policy I want to Log the details of the UserFaultContract. This is where I am unglued. And I hate becoming unglued. The fault is captured and logged...but I can't get the details of the fault. My exception policy is <add name="Transaction Policy"> <exceptionTypes> <add type="System.Exception, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" postHandlingAction="None" name="Exception"> <exceptionHandlers> <add logCategory="General" eventId="200" severity="Error" title="Transaction Error" formatterType="Microsoft.Practices.EnterpriseLibrary.ExceptionHandling.TextExceptionFormatter, Microsoft.Practices.EnterpriseLibrary.ExceptionHandling, Version=4.1.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" priority="2" useDefaultLogger="true" type="Microsoft.Practices.EnterpriseLibrary.ExceptionHandling.Logging.LoggingExceptionHandler, Microsoft.Practices.EnterpriseLibrary.ExceptionHandling.Logging, Version=4.1.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" name="Logging Handler" /> </exceptionHandlers> </add> <add type="System.ServiceModel.FaultException, System.ServiceModel, Version=3.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" postHandlingAction="None" name="FaultException"> <exceptionHandlers> <add logCategory="General" eventId="200" severity="Error" title="Service Fault" formatterType="Microsoft.Practices.EnterpriseLibrary.ExceptionHandling.TextExceptionFormatter, Microsoft.Practices.EnterpriseLibrary.ExceptionHandling, Version=4.1.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" priority="2" useDefaultLogger="true" type="Microsoft.Practices.EnterpriseLibrary.ExceptionHandling.Logging.LoggingExceptionHandler, Microsoft.Practices.EnterpriseLibrary.ExceptionHandling.Logging, Version=4.1.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" name="Logging Handler" /> </exceptionHandlers> </add> </exceptionTypes> </add> The exception logged is: Timestamp: 5/13/2010 14:53:40 Message: HandlingInstanceID: e9038634-e16e-4d87-ab1e-92379431838b An exception of type 'System.ServiceModel.FaultException`1[[LCI.DispatchMaster.FaultContracts.ServiceFaultContract, LCI.DispatchMaster.FaultContracts, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null]]' occurred and was caught. 05/13/2010 10:53:40 Type : System.ServiceModel.FaultException`1[[LCI.DispatchMaster.FaultContracts.ServiceFaultContract, LCI.DispatchMaster.FaultContracts, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null]], System.ServiceModel, Version=3.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 Message : There was an internal fault at the DispatchMaster service. Source : mscorlib Help link : Detail : LCI.DispatchMaster.FaultContracts.ServiceFaultContract Action : http://LCI.DispatchMaster.LogicalChoices.com/ITruckMasterService/MergeScenarioServiceFaultContractFault Code : System.ServiceModel.FaultCode Reason : There was an internal fault at the DispatchMaster service. Data : System.Collections.ListDictionaryInternal TargetSite : Void HandleReturnMessage(System.Runtime.Remoting.Messaging.IMessage, System.Runtime.Remoting.Messaging.IMessage) Stack Trace : In the fault contact there is an ID and a Message. I would, as you can see, like the ID and Message to be logged by EntLib. I am assuming that I'm going to have to write a custom handler to exctract the fault details - but thought I'd ask if I'm missing something in EntLib which might help me avoid that task. Thanks to anyone who is willing to help.

Read the article

how to display these text on blackberry and how to show the hyperlinks

- by Changqi

<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Strict//EN" "http://www.w3.org/TR/html4/strict.dtd"> <html> <head> <meta http-equiv="Content-Type" content="text/html; charset=UTF-8"> <title>A history of Canoe Cove /</title> </head> <body> <div class="tei"> <p> A History of </p> <p> The General Stores </p> <p> There were several general stores in our <a class="search orgName" target="_blank" href="http://islandlives.net/fedora/ilives_book_search/tei.orgNameTERM:%22Cove%22+AND+dc.type:collection">Cove</a> at different times. The one that lasted longest was at the Corner across from the school and it had many owners. Who established it is unclear but John MacKenzie, the piper, who was also a shoe maker lived there. He was a relative of the present day MacKenzies of <a class="search placeName" target="_blank" href="http://islandlives.net/fedora/ilives_book_search/tei.placeNameTERM:%22Canoe Cove%22+AND+dc.type:collection">Canoe Cove</a>. William MacKay who married Christena MacLean was operating it when it burned down and a store which had belonged to Neil "Cooper" MacLean was moved across to the site. This was later bought by <span class="persName"><a class="search persName" target="_blank" href="http://islandlives.net/fedora/ilives_book_search/tei.persNameTERM:%22MacCannell+Neil%22+AND+dc.type:collection"> Neil MacCannell </a></span> of Long Creek , a schoolteacher who taught in the <a class="search orgName" target="_blank" href="http://islandlives.net/fedora/ilives_book_search/tei.orgNameTERM:%22Cove%22+AND+dc.type:collection">Cove</a> for a few years. <span class="persName"><a class="search persName" target="_blank" href="http://islandlives.net/fedora/ilives_book_search/tei.persNameTERM:%22MacNevin+Hector%22+AND+dc.type:collection"> Hector MacNevin </a></span> from <a class="search placeName" target="_blank" href="http://islandlives.net/fedora/ilives_book_search/tei.placeNameTERM:%22St. Catherines%22+AND+dc.type:collection">St. Catherines</a> operated it for a year while it still belonged to <span class="persName"><a class="search persName" target="_blank" href="http://islandlives.net/fedora/ilives_book_search/tei.persNameTERM:%22MacCannell+Neil%22+AND+dc.type:collection"> Neil MacCannell </a></span> because Neil had accepted a job in <a class="search placeName" target="_blank" href="http://islandlives.net/fedora/ilives_book_search/tei.placeNameTERM:%22Charlottetown%22+AND+dc.type:collection">Charlottetown</a> as clerk of the Court. Later Mrs. John Angus Darrach bought it and she and her son George ran it for years until both had health problems, and had to close the store after which closing it never reopened. After George died and his wife Hazel moved to Montague to live with her family the building was sold to Robert Patterson . Rob lived in it for a few years, making many improvements then sold it to Kirk McAleer. </p> </div>

Read the article

PHP framework question

- by iconiK

I'm currently working on a browser-based MMO and have chosen the LAMP stack because of the extremely low cost to start with in production (versus Windows + IIS + ASP.NET/C# + SQL Server, even though I have MSDN Universal). However I will need a PHP framework for this as it's no easy task. I am not restricted by anything other than the ability to run on Linux, as I will use a dedicated cloud hosting solution (and a VMWare image for development) and can configure it as needed. In no specific order: It has to be easily scalable; this is crucial. If the game becomes a steady success it will eventually outgrow the server beyond what the host provides and would have to be moved to several load-balanced servers. It is crucial that this can be done with minimum effort. I do know this might require following strict conventions, so if you know of any for your suggested framework please explain what would be needed. It has to provide modules for all the core tasks: authentication, ACL, database access, MVC, and so on. One or two missing modules are fine, as long as they can easily be written and integrated. It should support internationalization. I think there is no excuse for any web framework not to provide means of translating the application and switching between languages without a lot of effort from the programmer. Must have very good community support and preferably commercial support as well. Yes, I do know QCodo/QCubed is so nice, but it is not mature enough for this task. Smooth AJAX support is required. Whether the framework comes with AJAX-capable widgets or has an easy way of adding AJAX is not relevant, as long as AJAX is easily doable. I plan to use jQuery + Dojo or one of them alone - not exactly sure. Auto-magically doing stuff when it improves readability and relieves a lot of effort would be especially nice if it is generally reliable and does not interfere with other requirements. This seems to be the case of CakePHP. I have read a lot of comparisons and I know it's a really hot debate. The general answer is "try and see for yourself what suits you". However, I can't say it is easy for this task and I'm calling for your experience with building applications with similar requirements. So far I'm tied up between Zend and CakePHP by the general criteria, however, all well-known frameworks offer the same functionality in some way or another with different approaches each with it's own advantages and disadvantages. Edits: I am kinda new to MVC, however, I am willing to learn it and I don't care if a framework is easier for those new to MVC. I have lots of time to learn MVC and any other architectures (or whatever they're called) you recommend. I will use Zend as a utility "framework", even though it's just a collection of libraries (some good ones though, as I have been told). Current PHP contenders are: CakePHP, Kohana, Zend alone.

Read the article

IErrorHandler doesn't seem to be handling my errors in WCF .. any ideas?

- by John Nicholas

Have been readign around on IErrorHandler and want to go the config route. so, I have read the following in an attempt to implement it. MSDN Keyvan Nayyeri blog about the type defintion Rory Primrose Blog I have got it to compile and from the various errors i have fixed it seems like WCF is actually loading the error handler. My problem is that the exception that i am throwing to handle in the error handler doesn;t get the exception passed to it. My service implementation simply calls a method on another class that throws ArgumentOutOfRangeException - however this exception never gets handled by the handler. My web.config <system.serviceModel> <bindings> <basicHttpBinding> <binding name="basic"> <security mode="None" /> </binding> </basicHttpBinding> </bindings> <extensions> <behaviorExtensions> <add name="customHttpBehavior" type="ErrorHandlerTest.ErrorHandlerElement, ErrorHandlerTest, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null" /> </behaviorExtensions> </extensions> <behaviors> <serviceBehaviors> <behavior name="exceptionHandlerBehaviour"> <serviceMetadata httpGetEnabled="true"/>  <serviceDebug includeExceptionDetailInFaults="true"/> <customHttpBehavior /> </behavior> </serviceBehaviors> </behaviors> <services> <service behaviorConfiguration="exceptionHandlerBehaviour" name="ErrorHandlerTest.Service1"> <endpoint binding="basicHttpBinding" bindingConfiguration="basic" contract="ErrorHandlerTest.IService1" /> </service> </services> Service Contract [ServiceContract] public interface IService1 { [OperationContract] [FaultContract(typeof(GeneralInternalFault))] string GetData(int value); } The ErrorHandler class public class ErrorHandler : IErrorHandler , IServiceBehavior { public bool HandleError(Exception error) { Console.WriteLine("caught exception {0}:",error.Message ); return true; } public void ProvideFault(Exception error, MessageVersion version, ref Message fault) { if (fault!=null ) { if (error is ArgumentOutOfRangeException ) { var fe = new FaultException<GeneralInternalFault>(new GeneralInternalFault("general internal fault.")); MessageFault mf = fe.CreateMessageFault(); fault = Message.CreateMessage(version, mf, fe.Action); } else { var fe = new FaultException<GeneralInternalFault>(new GeneralInternalFault(" the other general internal fault.")); MessageFault mf = fe.CreateMessageFault(); fault = Message.CreateMessage(version, mf, fe.Action); } } } public void AddBindingParameters(ServiceDescription serviceDescription, ServiceHostBase serviceHostBase, System.Collections.ObjectModel.Collection<ServiceEndpoint> endpoints, BindingParameterCollection bindingParameters) { } public void ApplyDispatchBehavior(ServiceDescription serviceDescription, ServiceHostBase serviceHostBase) { IErrorHandler errorHandler = new ErrorHandler(); foreach (ChannelDispatcherBase channelDispatcherBase in serviceHostBase.ChannelDispatchers) { ChannelDispatcher channelDispatcher = channelDispatcherBase as ChannelDispatcher; if (channelDispatcher != null) { channelDispatcher.ErrorHandlers.Add(errorHandler); } } } public void Validate(ServiceDescription serviceDescription, ServiceHostBase serviceHostBase) { } } And the Behaviour Extension Element public class ErrorHandlerElement : BehaviorExtensionElement { protected override object CreateBehavior() { return new ErrorHandler(); } public override Type BehaviorType { get { return typeof(ErrorHandler); } } }

Read the article

Allocation algorithm help, using Python.

- by Az

Hi there, I've been working on this general allocation algorithm for students. The pseudocode for it (a Python implementation) is: for a student in a dictionary of students: for student's preference in a set of preferences (ordered from 1 to 10): let temp_project be the first preferred project check if temp_project is available if so, allocate it to them and make the project UNavailable to others Quite simply this will try to allocate projects by starting from their most preferred. The way it works, out of a set of say 100 projects, you list 10 you would want to do. So the 10th project wouldn't be the "least preferred overall" but rather the least preferred in their chosen set, which isn't so bad. Obviously if it can't allocate a project, a student just reverts to the base case which is an allocation of None, with a rank of 11. What I'm doing is calculating the allocation "quality" based on a weighted sum of the ranks. So the lower the numbers (i.e. more highly preferred projects), the better the allocation quality (i.e. more students have highly preferred projects). That's basically what I've currently got. Simple and it works. Now I'm working on this algorithm that tries to minimise the allocation weight locally (this pseudocode is a bit messy, sorry). The only reason this will probably work is because my "search space" as it is, isn't particularly large (just a very general, anecdotal observation, mind you). Since the project is only specific to my Department, we have their own limits imposed. So the number of students can't exceed 100 and the number of preferences won't exceed 10. for student in a dictionary/list/whatever of students: where i = 0 take the (i)st student, (i+1)nd student for their ranks: allocate the projects and set local_weighting to be sum(student_i.alloc_proj_rank, student_i+1.alloc_proj_rank) these are the cases: if local_weighting is 2 (i.e. both ranks are 1): then i += 1 and and continue above if local weighting is = N>2 (i.e. one or more ranks are greater than 1): let temp_local_weighting be N: pick student with lowest rank and then move him to his next rank and pick the other student and reallocate his project after this if temp_local_weighting is < N: then allocate those projects to the students move student with lowest rank to the next rank and reallocate other if temp_local_weighting < previous_temp_allocation: let these be the new allocated projects try moving for the lowest rank and reallocate other else: if this weighting => previous_weighting let these be the allocated projects i += 1 and move on for the rest of the students So, questions: This is sort of a modification of simulated annealing, but any sort of comments on this would be appreciated. How would I keep track of which student is (i) and which student is (i+1) If my overall list of students is 100, then the thing would mess up on (i+1) = 101 since there is none. How can I circumvent that? Any immediate flaws that can be spotted? Extra info: My students dictionary is designed as such: students[student_id] = Student(student_id, student_name, alloc_proj, alloc_proj_rank, preferences) where preferences is in the form of a dictionary such that preferences[rank] = {project_id}

Read the article

Round-twice error in .NET's Double.ToString method

- by Jeppe Stig Nielsen

Mathematically, consider for this question the rational number 8725724278030350 / 2**48 where ** in the denominator denotes exponentiation, i.e. the denominator is 2 to the 48th power. (The fraction is not in lowest terms, reducible by 2.) This number is exactly representable as a System.Double. Its decimal expansion is 31.0000000000000'49'73799150320701301097869873046875 (exact) where the apostrophes do not represent missing digits but merely mark the boudaries where rounding to 15 resp. 17 digits is to be performed. Note the following: If this number is rounded to 15 digits, the result will be 31 (followed by thirteen 0s) because the next digits (49...) begin with a 4 (meaning round down). But if the number is first rounded to 17 digits and then rounded to 15 digits, the result could be 31.0000000000001. This is because the first rounding rounds up by increasing the 49... digits to 50 (terminates) (next digits were 73...), and the second rounding might then round up again (when the midpoint-rounding rule says "round away from zero"). (There are many more numbers with the above characteristics, of course.) Now, it turns out that .NET's standard string representation of this number is "31.0000000000001". The question: Isn't this a bug? By standard string representation we mean the String produced by the parameterles Double.ToString() instance method which is of course identical to what is produced by ToString("G"). An interesting thing to note is that if you cast the above number to System.Decimal then you get a decimal that is 31 exactly! See this Stack Overflow question for a discussion of the surprising fact that casting a Double to Decimal involves first rounding to 15 digits. This means that casting to Decimal makes a correct round to 15 digits, whereas calling ToSting() makes an incorrect one. To sum up, we have a floating-point number that, when output to the user, is 31.0000000000001, but when converted to Decimal (where 29 digits are available), becomes 31 exactly. This is unfortunate. Here's some C# code for you to verify the problem: static void Main() { const double evil = 31.0000000000000497; string exactString = DoubleConverter.ToExactString(evil); // Jon Skeet, http://csharpindepth.com/Articles/General/FloatingPoint.aspx Console.WriteLine("Exact value (Jon Skeet): {0}", exactString); // writes 31.00000000000004973799150320701301097869873046875 Console.WriteLine("General format (G): {0}", evil); // writes 31.0000000000001 Console.WriteLine("Round-trip format (R): {0:R}", evil); // writes 31.00000000000005 Console.WriteLine(); Console.WriteLine("Binary repr.: {0}", String.Join(", ", BitConverter.GetBytes(evil).Select(b => "0x" + b.ToString("X2")))); Console.WriteLine(); decimal converted = (decimal)evil; Console.WriteLine("Decimal version: {0}", converted); // writes 31 decimal preciseDecimal = decimal.Parse(exactString, CultureInfo.InvariantCulture); Console.WriteLine("Better decimal: {0}", preciseDecimal); // writes 31.000000000000049737991503207 } The above code uses Skeet's ToExactString method. If you don't want to use his stuff (can be found through the URL), just delete the code lines above dependent on exactString. You can still see how the Double in question (evil) is rounded and cast.

Read the article

evaluating cost/benefits of using extension methods in C# => 3.0

- by BillW

Hi, In what circumstances (usage scenarios) would you choose to write an extension rather than sub-classing an object ? < full disclosure : I am not an MS employee; I do not know Mitsu Furota personally; I do know the author of the open-source Componax library mentioned here, but I have no business dealings with him whatsoever; I am not creating, or planning to create any commercial product using extensions : in sum : this post is from pure intellectal curiousity related to my trying to (continually) become aware of "best practices" I find the idea of extension methods "cool," and obviously you can do "far-out" things with them as in the many examples you can in Mitsu Furota's (MS) blog postslink text. A personal friend wrote the open-source Componax librarylink text, and there's some remarkable facilities in there; but he is in complete command of his small company with total control over code guidelines, and every line of code "passes through his hands." While this is speculation on my part : I think/guess other issues might come into play in a medium-to-large software team situation re use of Extensions. Looking at MS's guidelines at link text, you find : In general, you will probably be calling extension methods far more often than implementing your own. ... In general, we recommend that you implement extension methods sparingly and only when you have to. Whenever possible, client code that must extend an existing type should do so by creating a new type derived from the existing type. For more information, see Inheritance (C# Programming Guide). ... When the compiler encounters a method invocation, it first looks for a match in the type's instance methods. If no match is found, it will search for any extension methods that are defined for the type, and bind to the first extension method that it finds. And at Ms's link text : Extension methods present no specific security vulnerabilities. They can never be used to impersonate existing methods on a type, because all name collisions are resolved in favor of the instance or static method defined by the type itself. Extension methods cannot access any private data in the extended class. Factors that seem obvious to me would include : I assume you would not write an extension unless you expected it be used very generally and very frequently. On the other hand : couldn't you say the same thing about sub-classing ? Knowing we can compile them into a seperate dll, and add the compiled dll, and reference it, and then use the extensions : is "cool," but does that "balance out" the cost inherent in the compiler first having to check to see if instance methods are defined as described above. Or the cost, in case of a "name clash," of using the Static invocation methods to make sure your extension is invoked rather than the instance definition ? How frequent use of Extensions would affect run-time performance or memory use : I have no idea. So, I'd appreciate your thoughts, or knowing about how/when you do, or don't do, use Extensions, compared to sub-classing. thanks, Bill

Read the article

Is it possible to shuffle a 2D matrix while preserving row AND column frequencies?

- by j_random_hacker

Suppose I have a 2D array like the following: GACTG AGATA TCCGA Each array element is taken from a small finite set (in my case, DNA nucleotides -- {A, C, G, T}). I would like to randomly shuffle this array somehow while preserving both row and column nucleotide frequencies. Is this possible? Can it be done efficiently? [EDIT]: By this I mean I want to produce a new matrix where each row has the same number of As, Cs, Gs and Ts as the corresponding row of the original matrix, and where each column has the same number of As, Cs, Gs and Ts as the corresponding column of the original matrix. Permuting the rows or columns of the original matrix will not achieve this in general. (E.g. for the example above, the top row has 2 Gs, and 1 each of A, C and T; if this row was swapped with row 2, the top row in the resulting matrix would have 3 As, 1 G and 1 T.) It's simple enough to preserve just column frequencies by shuffling a column at a time, and likewise for rows. But doing this will in general alter the frequencies of the other kind. My thoughts so far: If it's possible to pick 2 rows and 2 columns so that the 4 elements at the corners of this rectangle have the pattern XY YX for some pair of distinct elements X and Y, then replacing these 4 elements with YX XY will maintain both row and column frequencies. In the example at the top, this can be done for (at least) rows 1 and 2 and columns 2 and 5 (whose corners give the 2x2 matrix AG;GA), and for rows 1 and 3 and columns 1 and 4 (whose corners give GT;TG). Clearly this could be repeated a number of times to produce some level of randomisation. Generalising a bit, any "subrectangle" induced by a subset of rows and a subset of columns, in which the frequencies of all rows are the same and the frequencies of all columns are the same, can have both its rows and columns permuted to produce a valid complete rectangle. (Of these, only those subrectangles in which at least 1 element is changed are actually interesting.) Big questions: Are all valid complete matrices reachable by a series of such "subrectangle rearrangements"? I suspect the answer is yes. Are all valid subrectangle rearrangements decomposable into a series of 2x2 swaps? I suspect the answer is no, but I hope it's yes, since that would seem to make it easier to come up with an efficient algorithm. Can some or all of the valid rearrangements be computed efficiently? This question addresses a special case in which the set of possible elements is {0, 1}. The solutions people have come up with there are similar to what I have come up with myself, and are probably usable, but not ideal as they require an arbitrary amount of backtracking to work correctly. Also I'm concerned that only 2x2 swaps are considered. Finally, I would ideally like a solution that can be proven to select a matrix uniformly at random from the set of all matrices having identical row frequencies and column frequencies to the original. I know, I'm asking for a lot :)

Read the article

MySQL – Learning MySQL Online in 6 Hours – MySQL Fundamentals in 320 Minutes

- by Pinal Dave

MySQL is one of the most popular database language and I have been recently working with it a lot. Data have no barrier and every database have their own place. I have been working with MySQL for quite a while and just like SQL Server, I often find lots of people asking me if I have a tutorial which can teach them MySQL from the beginning. Here is the good news, I have written two different courses on MySQL Fundamentals, which is available online. The reason for writing two different courses was to keep the learning simple. Both of the courses are absolutely connected with other but designed if you watch either of the course independently you can watch them and learn without dependencies. However, if you ask me, I will suggest that you watch MySQL Fundamentals Part 1 course following with MySQL Fundamentals Part 2 course. Let us quickly explore outline of MySQL courses. MySQL Fundamental – 1 (157 minutes) MySQL is a popular choice of database for use in web applications, and is a central component of the widely used LAMP open source web application software stack. This course covers the fundamentals of MySQL, including how to install MySQL as well as written basic data retrieval and data modification queries. Introduction (duration 00:02:12) Installations and GUI Tools (duration 00:13:51) Fundamentals of RDBMS and Database Designs (duration 00:16:13) Introduction MYSQL Workbench (duration 00:31:51) Data Retrieval Techniques (duration 01:11:13) Data Modification Techniques (duration 00:20:41) Summary and Resources (duration 00:01:31) MySQL Fundamental – 2 (163 minutes) MySQL is a popular choice of database for use in web applications, and is a central component of the widely used LAMP open source web application software stack. In this course, which is part 2 of the Fundamentals of MySQL series, we explore more advanced topics such as stored procedures & user-defined functions, subqueries & joins, views and events & triggers. Introduction (duration 00:02:09) Joins, Unions and Subqueries (duration 01:03:56) MySQL Functions (duration 00:36:55) MySQL Views (duration 00:19:19) Stored Procedures and Stored Functions (duration 00:25:23) Triggers and Events (duration 00:13:41) Summary and Resources (duration 00:02:18) Note if you click on the link above and you do not see the play button to watch the course, you will have to login to the system and watch the course. I would like to throw a challenge to you – Can you watch both of the courses in a single day? If yes, once you are done watching the course on your Pluralsight Profile Page (here is my profile http://pluralsight.com/training/users/pinal-dave) you will get following badges. If you have already watched MySQL Fundamental Part 1, you can qualify by just watching MySQL Fundamental Part 2. Just send me the link to your profile and I will publish your name on this blog. For the first five people who send me email at Pinal at sqlauthority.com; I might have something cool as a giveaway as well. Watch the teaser of MySQL course. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: MySQL, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

Read the article

Tip/Trick: Fix Common SEO Problems Using the URL Rewrite Extension

- by ScottGu

Search engine optimization (SEO) is important for any publically facing web-site. A large % of traffic to sites now comes directly from search engines, and improving your site’s search relevancy will lead to more users visiting your site from search engine queries. This can directly or indirectly increase the money you make through your site. This blog post covers how you can use the free Microsoft URL Rewrite Extension to fix a bunch of common SEO problems that your site might have. It takes less than 15 minutes (and no code changes) to apply 4 simple URL Rewrite rules to your site, and in doing so cause search engines to drive more visitors and traffic to your site. The techniques below work equally well with both ASP.NET Web Forms and ASP.NET MVC based sites. They also works with all versions of ASP.NET (and even work with non-ASP.NET content). [In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu] Measuring the SEO of your website with the Microsoft SEO Toolkit A few months ago I blogged about the free SEO Toolkit that we’ve shipped. This useful tool enables you to automatically crawl/scan your site for SEO correctness, and it then flags any SEO issues it finds. I highly recommend downloading and using the tool against any public site you work on. It makes it easy to spot SEO issues you might have in your site, and pinpoint ways to optimize it further. Below is a simple example of a report I ran against one of my sites (www.scottgu.com) prior to applying the URL Rewrite rules I’ll cover later in this blog post: Search Relevancy and URL Splitting Two of the important things that search engines evaluate when assessing your site’s “search relevancy” are: How many other sites link to your content. Search engines assume that if a lot of people around the web are linking to your content, then it is likely useful and so weight it higher in relevancy. The uniqueness of the content it finds on your site. If search engines find that the content is duplicated in multiple places around the Internet (or on multiple URLs on your site) then it is likely to drop the relevancy of the content. One of the things you want to be very careful to avoid when building public facing sites is to not allow different URLs to retrieve the same content within your site. Doing so will hurt with both of the situations above. In particular, allowing external sites to link to the same content with multiple URLs will cause your link-count and page-ranking to be split up across those different URLs (and so give you a smaller page rank than what it would otherwise be if it was just one URL). Not allowing external sites to link to you in different ways sounds easy in theory – but you might wonder what exactly this means in practice and how you avoid it. 4 Really Common SEO Problems Your Sites Might Have Below are 4 really common scenarios that can cause your site to inadvertently expose multiple URLs for the same content. When this happens external sites linking to yours will end up splitting their page links across multiple URLs - and as a result cause you to have a lower page ranking with search engines than you deserve. SEO Problem #1: Default Document IIS (and other web servers) supports the concept of a “default document”. This allows you to avoid having to explicitly specify the page you want to serve at either the root of the web-site/application, or within a sub-directory. This is convenient – but means that by default this content is available via two different publically exposed URLs (which is bad). For example: http://scottgu.com/ http://scottgu.com/default.aspx SEO Problem #2: Different URL Casings Web developers often don’t realize URLs are case sensitive to search engines on the web. This means that search engines will treat the following links as two completely different URLs: http://scottgu.com/Albums.aspx http://scottgu.com/albums.aspx SEO Problem #3: Trailing Slashes Consider the below two URLs – they might look the same at first, but they are subtly different. The trailing slash creates yet another situation that causes search engines to treat the URLs as different and so split search rankings: http://scottgu.com http://scottgu.com/ SEO Problem #4: Canonical Host Names Sometimes sites support scenarios where they support a web-site with both a leading “www” hostname prefix as well as just the hostname itself. This causes search engines to treat the URLs as different and split search rankling: http://scottgu.com/albums.aspx/ http://www.scottgu.com/albums.aspx/ How to Easily Fix these SEO Problems in 10 minutes (or less) using IIS Rewrite If you haven’t been careful when coding your sites, chances are you are suffering from one (or more) of the above SEO problems. Addressing these issues will improve your search engine relevancy ranking and drive more traffic to your site. The “good news” is that fixing the above 4 issues is really easy using the URL Rewrite Extension. This is a completely free Microsoft extension available for IIS 7.x (on Windows Server 2008, Windows Server 2008 R2, Windows 7 and Windows Vista). The great thing about using the IIS Rewrite extension is that it allows you to fix the above problems *without* having to change any code within your applications. You can easily install the URL Rewrite Extension in under 3 minutes using the Microsoft Web Platform Installer (a free tool we ship that automates setting up web servers and development machines). Just click the green “Install Now” button on the URL Rewrite Spotlight page to install it on your Windows Server 2008, Windows 7 or Windows Vista machine: Once installed you’ll find that a new “URL Rewrite” icon is available within the IIS 7 Admin Tool: Double-clicking the icon will open up the URL Rewrite admin panel – which will display the list of URL Rewrite rules configured for a particular application or site: Notice that our rewrite rule list above is currently empty (which is the default when you first install the extension). We can click the “Add Rule…” link button in the top-right of the panel to add and enable new URL Rewriting logic for our site. Scenario 1: Handling Default Document Scenarios One of the SEO problems I discussed earlier in this post was the scenario where the “default document” feature of IIS causes you to inadvertently expose two URLs for the same content on your site. For example: http://scottgu.com/ http://scottgu.com/default.aspx We can fix this by adding a new IIS Rewrite rule that automatically redirects anyone who navigates to the second URL to instead go to the first one. We will setup the HTTP redirect to be a “permanent redirect” – which will indicate to search engines that they should follow the redirect and use the new URL they are redirected to as the identifier of the content they retrieve. Let’s look at how we can create such a rule. We’ll begin by clicking the “Add Rule” link in the screenshot above. This will cause the below dialog to display: We’ll select the “Blank Rule” template within the “Inbound rules” section to create a new custom URL Rewriting rule. This will display an empty pane like below: Don’t worry – setting up the above rule is easy. The following 4 steps explain how to do so: Step 1: Name the Rule Our first step will be to name the rule we are creating. Naming it with a descriptive name will make it easier to find and understand later. Let’s name this rule our “Default Document URL Rewrite” rule: Step 2: Setup the Regular Expression that Matches this Rule Our second step will be to specify a regular expression filter that will cause this rule to execute when an incoming URL matches the regex pattern. Don’t worry if you aren’t good with regular expressions - I suck at them too. The trick is to know someone who is good at them or copy/paste them from a web-site. Below we are going to specify the following regular expression as our pattern rule: (.*?)/?Default\.aspx$ This pattern will match any URL string that ends with Default.aspx. The "(.*?)" matches any preceding character zero or more times. The "/?" part says to match the slash symbol zero or one times. The "$" symbol at the end will ensure that the pattern will only match strings that end with Default.aspx. Combining all these regex elements allows this rule to work not only for the root of your web site (e.g. http://scottgu.com/default.aspx) but also for any application or subdirectory within the site (e.g. http://scottgu.com/photos/default.aspx. Because the “ignore case” checkbox is selected it will match both “Default.aspx” as well as “default.aspx” within the URL. One nice feature built-into the rule editor is a “Test pattern” button that you can click to bring up a dialog that allows you to test out a few URLs with the rule you are configuring: Above I've added a “products/default.aspx” URL and clicked the “Test” button. This will give me immediate feedback on whether the rule will execute for it. Step 3: Setup a Permanent Redirect Action We’ll then setup an action to occur when our regular expression pattern matches the incoming URL: In the dialog above I’ve changed the “Action Type” drop down to be a “Redirect” action. The “Redirect Type” will be a HTTP 301 Permanent redirect – which means search engines will follow it. I’ve also set the “Redirect URL” property to be: {R:1}/ This indicates that we want to redirect the web client requesting the original URL to a new URL that has the originally requested URL path - minus the "Default.aspx" in it. For example, requests for http://scottgu.com/default.aspx will be redirected to http://scottgu.com/, and requests for http://scottgu.com/photos/default.aspx will be redirected to http://scottgu.com/photos/ The "{R:N}" regex construct, where N >= 0, is called a back-reference and N is the back-reference index. In the case of our pattern "(.*?)/?Default\.aspx$", if the input URL is "products/Default.aspx" then {R:0} will contain "products/Default.aspx" and {R:1} will contain "products". We are going to use this {R:1}/ value to be the URL we redirect users to. Step 4: Apply and Save the Rule Our final step is to click the “Apply” button in the top right hand of the IIS admin tool – which will cause the tool to persist the URL Rewrite rule into our application’s root web.config file (under a <system.webServer/rewrite> configuration section): <configuration> <system.webServer> <rewrite> <rules> <rule name="Default Document" stopProcessing="true"> <match url="(.*?)/?Default\.aspx$" /> <action type="Redirect" url="{R:1}/" /> </rule> </rules> </rewrite> </system.webServer> </configuration> Because IIS 7.x and ASP.NET share the same web.config files, you can actually just copy/paste the above code into your web.config files using Visual Studio and skip the need to run the admin tool entirely. This also makes adding/deploying URL Rewrite rules with your ASP.NET applications really easy. Step 5: Try the Rule Out Now that we’ve saved the rule, let’s try it out on our site. Try the following two URLs on my site: http://scottgu.com/ http://scottgu.com/default.aspx Notice that the second URL automatically redirects to the first one. Because it is a permanent redirect, search engines will follow the URL and should update the page ranking of http://scottgu.com to include links to http://scottgu.com/default.aspx as well. Scenario 2: Different URL Casing Another common SEO problem I discussed earlier in this post is that URLs are case sensitive to search engines on the web. This means that search engines will treat the following links as two completely different URLs: http://scottgu.com/Albums.aspx http://scottgu.com/albums.aspx We can fix this by adding a new IIS Rewrite rule that automatically redirects anyone who navigates to the first URL to instead go to the second (all lower-case) one. Like before, we will setup the HTTP redirect to be a “permanent redirect” – which will indicate to search engines that they should follow the redirect and use the new URL they are redirected to as the identifier of the content they retrieve. To create such a rule we’ll click the “Add Rule” link in the URL Rewrite admin tool again. This will cause the “Add Rule” dialog to appear again: Unlike the previous scenario (where we created a “Blank Rule”), with this scenario we can take advantage of a built-in “Enforce lowercase URLs” rule template. When we click the “ok” button we’ll see the following dialog which asks us if we want to create a rule that enforces the use of lowercase letters in URLs: When we click the “Yes” button we’ll get a pre-written rule that automatically performs a permanent redirect if an incoming URL has upper-case characters in it – and automatically send users to a lower-case version of the URL: We can click the “Apply” button to use this rule “as-is” and have it apply to all incoming URLs to our site. Because my www.scottgu.com site uses ASP.NET Web Forms, I’m going to make one small change to the rule we generated above – which is to add a condition that will ensure that URLs to ASP.NET’s built-in “WebResource.axd” handler are excluded from our case-sensitivity URL Rewrite logic. URLs to the WebResource.axd handler will only come from server-controls emitted from my pages – and will never be linked to from external sites. While my site will continue to function fine if we redirect these URLs to automatically be lower-case – doing so isn’t necessary and will add an extra HTTP redirect to many of my pages. The good news is that adding a condition that prevents my URL Rewriting rule from happening with certain URLs is easy. We simply need to expand the “Conditions” section of the form above We can then click the “Add” button to add a condition clause. This will bring up the “Add Condition” dialog: Above I’ve entered {URL} as the Condition input – and said that this rule should only execute if the URL does not match a regex pattern which contains the string “WebResource.axd”. This will ensure that WebResource.axd URLs to my site will be allowed to execute just fine without having the URL be re-written to be all lower-case. Note: If you have static resources (like references to .jpg, .css, and .js files) within your site that currently use upper-case characters you’ll probably want to add additional condition filter clauses so that URLs to them also don’t get redirected to be lower-case (just add rules for patterns like .jpg, .gif, .js, etc). Your site will continue to work fine if these URLs get redirected to be lower case (meaning the site won’t break) – but it will cause an extra HTTP redirect to happen on your site for URLs that don’t need to be redirected for SEO reasons. So setting up a condition clause makes sense to add. When I click the “ok” button above and apply our lower-case rewriting rule the admin tool will save the following additional rule to our web.config file: <configuration> <system.webServer> <rewrite> <rules> <rule name="Default Document" stopProcessing="true"> <match url="(.*?)/?Default\.aspx$" /> <action type="Redirect" url="{R:1}/" /> </rule> <rule name="Lower Case URLs" stopProcessing="true"> <match url="[A-Z]" ignoreCase="false" /> <conditions logicalGrouping="MatchAll" trackAllCaptures="false"> <add input="{URL}" pattern="WebResource.axd" negate="true" /> </conditions> <action type="Redirect" url="{ToLower:{URL}}" /> </rule> </rules> </rewrite> </system.webServer> </configuration> Try the Rule Out Now that we’ve saved the rule, let’s try it out on our site. Try the following two URLs on my site: http://scottgu.com/Albums.aspx http://scottgu.com/albums.aspx Notice that the first URL (which has a capital “A”) automatically does a redirect to a lower-case version of the URL. Scenario 3: Trailing Slashes Another common SEO problem I discussed earlier in this post is the scenario of trailing slashes within URLs. The trailing slash creates yet another situation that causes search engines to treat the URLs as different and so split search rankings: http://scottgu.com http://scottgu.com/ We can fix this by adding a new IIS Rewrite rule that automatically redirects anyone who navigates to the first URL (that does not have a trailing slash) to instead go to the second one that does. Like before, we will setup the HTTP redirect to be a “permanent redirect” – which will indicate to search engines that they should follow the redirect and use the new URL they are redirected to as the identifier of the content they retrieve. To create such a rule we’ll click the “Add Rule” link in the URL Rewrite admin tool again. This will cause the “Add Rule” dialog to appear again: The URL Rewrite admin tool has a built-in “Append or remove the trailing slash symbol” rule template. When we select it and click the “ok” button we’ll see the following dialog which asks us if we want to create a rule that automatically redirects users to a URL with a trailing slash if one isn’t present: Like within our previous lower-casing rewrite rule we’ll add one additional condition clause that will exclude WebResource.axd URLs from being processed by this rule. This will avoid an unnecessary redirect for happening for those URLs. When we click the “OK” button we’ll get a pre-written rule that automatically performs a permanent redirect if the URL doesn’t have a trailing slash – and if the URL is not processed by either a directory or a file. This will save the following additional rule to our web.config file: <configuration> <system.webServer> <rewrite> <rules> <rule name="Default Document" stopProcessing="true"> <match url="(.*?)/?Default\.aspx$" /> <action type="Redirect" url="{R:1}/" /> </rule> <rule name="Lower Case URLs" stopProcessing="true"> <match url="[A-Z]" ignoreCase="false" /> <conditions logicalGrouping="MatchAll" trackAllCaptures="false"> <add input="{URL}" pattern="WebResource.axd" negate="true" /> </conditions> <action type="Redirect" url="{ToLower:{URL}}" /> </rule> <rule name="Trailing Slash" stopProcessing="true"> <match url="(.*[^/])$" /> <conditions logicalGrouping="MatchAll" trackAllCaptures="false"> <add input="{REQUEST_FILENAME}" matchType="IsDirectory" negate="true" /> <add input="{REQUEST_FILENAME}" matchType="IsFile" negate="true" /> <add input="{URL}" pattern="WebResource.axd" negate="true" /> </conditions> <action type="Redirect" url="{R:1}/" /> </rule> </rules> </rewrite> </system.webServer> </configuration> Try the Rule Out Now that we’ve saved the rule, let’s try it out on our site. Try the following two URLs on my site: http://scottgu.com http://scottgu.com/ Notice that the first URL (which has no trailing slash) automatically does a redirect to a URL with the trailing slash. Because it is a permanent redirect, search engines will follow the URL and update the page ranking. Scenario 4: Canonical Host Names The final SEO problem I discussed earlier are scenarios where a site works with both a leading “www” hostname prefix as well as just the hostname itself. This causes search engines to treat the URLs as different and split search rankling: http://www.scottgu.com/albums.aspx http://scottgu.com/albums.aspx We can fix this by adding a new IIS Rewrite rule that automatically redirects anyone who navigates to the first URL (that has a www prefix) to instead go to the second URL. Like before, we will setup the HTTP redirect to be a “permanent redirect” – which will indicate to search engines that they should follow the redirect and use the new URL they are redirected to as the identifier of the content they retrieve. To create such a rule we’ll click the “Add Rule” link in the URL Rewrite admin tool again. This will cause the “Add Rule” dialog to appear again: The URL Rewrite admin tool has a built-in “Canonical domain name” rule template. When we select it and click the “ok” button we’ll see the following dialog which asks us if we want to create a redirect rule that automatically redirects users to a primary host name URL: Above I’m entering the primary URL address I want to expose to the web: scottgu.com. When we click the “OK” button we’ll get a pre-written rule that automatically performs a permanent redirect if the URL has another leading domain name prefix. This will save the following additional rule to our web.config file: <configuration> <system.webServer> <rewrite> <rules> <rule name="Cannonical Hostname"> <match url="(.*)" /> <conditions logicalGrouping="MatchAll" trackAllCaptures="false"> <add input="{HTTP_HOST}" pattern="^scottgu\.com$" negate="true" /> </conditions> <action type="Redirect" url="http://scottgu.com/{R:1}" /> </rule> <rule name="Default Document" stopProcessing="true"> <match url="(.*?)/?Default\.aspx$" /> <action type="Redirect" url="{R:1}/" /> </rule> <rule name="Lower Case URLs" stopProcessing="true"> <match url="[A-Z]" ignoreCase="false" /> <conditions logicalGrouping="MatchAll" trackAllCaptures="false"> <add input="{URL}" pattern="WebResource.axd" negate="true" /> </conditions> <action type="Redirect" url="{ToLower:{URL}}" /> </rule> <rule name="Trailing Slash" stopProcessing="true"> <match url="(.*[^/])$" /> <conditions logicalGrouping="MatchAll" trackAllCaptures="false"> <add input="{REQUEST_FILENAME}" matchType="IsDirectory" negate="true" /> <add input="{REQUEST_FILENAME}" matchType="IsFile" negate="true" /> <add input="{URL}" pattern="WebResource.axd" negate="true" /> </conditions> <action type="Redirect" url="{R:1}/" /> </rule> </rules> </rewrite> </system.webServer> </configuration> Try the Rule Out Now that we’ve saved the rule, let’s try it out on our site. Try the following two URLs on my site: http://www.scottgu.com/albums.aspx http://scottgu.com/albums.aspx Notice that the first URL (which has the “www” prefix) now automatically does a redirect to the second URL which does not have the www prefix. Because it is a permanent redirect, search engines will follow the URL and update the page ranking. 4 Simple Rules for Improved SEO The above 4 rules are pretty easy to setup and should take less than 15 minutes to configure on existing sites you already have. The beauty of using a solution like the URL Rewrite Extension is that you can take advantage of it without having to change code within your web-site – and without having to break any existing links already pointing at your site. Users who follow existing links will be automatically redirected to the new URLs you wish to publish. And search engines will start to give your site a higher search relevancy ranking – which will list your site higher in search results and drive more traffic to it. Customizing your URL Rewriting rules further is easy to-do either by editing the web.config file directly, or alternatively, just double click the URL Rewrite icon within the IIS 7.x admin tool and it will list all the active rules for your web-site or application: Clicking any of the rules above will open the rules editor back up and allow you to tweak/customize/save them further. Summary Measuring and improving SEO is something every developer building a public-facing web-site needs to think about and focus on. If you haven’t already, download and use the SEO Toolkit to analyze the SEO of your sites today. New URL Routing features in ASP.NET MVC and ASP.NET Web Forms 4 make it much easier to build applications that have more control over the URLs that are published. Tools like the URL Rewrite Extension that I’ve talked about in this blog post make it much easier to improve the URLs that are published from sites you already have built today – without requiring you to change a lot of code. The URL Rewrite Extension provides a bunch of additional great capabilities – far beyond just SEO - as well. I’ll be covering these additional capabilities more in future blog posts. Hope this helps, Scott

Read the article

Visual Studio App.config XML Transformation

- by João Angelo

Visual Studio 2010 introduced a much-anticipated feature, Web configuration transformations. This feature allows to configure a web application project to transform the web.config file during deployment based on the current build configuration (Debug, Release, etc). If you haven’t already tried it there is a nice step-by-step introduction post to XML transformations on the Visual Web Developer Team Blog and for a quick reference on the supported syntax you have this MSDN entry. Unfortunately there are some bad news, this new feature is specific to web application projects since it resides in the Web Publishing Pipeline (WPP) and therefore is not officially supported in other project types like such as a Windows applications. The keyword here is officially because Vishal Joshi has a nice blog post on how to extend it’s support to app.config transformations. However, the proposed workaround requires that the build action for the app.config file be changed to Content instead of the default None. Also from the comments to the said post it also seems that the workaround will not work for a ClickOnce deployment. Working around this I tried to remove the build action change requirement and at the same time add ClickOnce support. This effort resulted in a single MSBuild project file (AppConfig.Transformation.targets) available for download from GitHub. It integrates itself in the build process so in order to add app.config transformation support to an existing Windows Application Project you just need to import this targets file after all the other import directives that already exist in the *.csproj file. Before – Without App.config transformation support ... <Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets" /> <Target Name="BeforeBuild"> </Target> <Target Name="AfterBuild"> </Target> </Project> After – With App.config transformation support ... <Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets" /> <Import Project="C:\MyExtensions\AppConfig.Transformation.targets" /> <Target Name="BeforeBuild"> </Target> <Target Name="AfterBuild"> </Target> </Project> As a final disclaimer, the testing time was limited so any problem that you find let me know. The MSBuild project invokes the mage tool so the Framework SDK must be installed. Update: I finally had some spare time and was able to check the problem reported by Geoff Smith and believe the problem is solved. The Publish command inside Visual Studio triggers a build workflow different than through MSBuild command line and this was causing problems. I posted a new version in GitHub that should now support ClickOnce deployment with app.config tranformation from within Visual Studio and MSBuild command line. Also here is a link for the sample application used to test the new version using the Publish command with the install location set to be from a CD-ROM or DVD-ROM and selected that the application will not check for updates. Thanks to Geoff for spotting the problem.

Read the article

Developer’s Life – Every Developer is a Batman

- by Pinal Dave

Batman is one of the darkest superheroes in the fantasy canon. He does not come to his powers through any sort of magical coincidence or radioactive insect, but through a lot of psychological scarring caused by witnessing the death of his parents. Despite his dark back story, he possesses a lot of admirable abilities that I feel bear comparison to developers. Batman has the distinct advantage that his alter ego, Bruce Wayne is a millionaire (or billionaire in today’s reboots). This means that he can spend his time working on his athletic abilities, building a secret lair, and investing his money in cool tools. This might not be true for developers (well, most developers), but I still think there are many parallels. So how are developers like Batman? Well, read on my list of reasons. Develop Skills Batman works on his skills. He didn’t get the strength to scale Gotham’s skyscrapers by inheriting his powers or suffering an industrial accident. Developers also hone their skills daily. They might not be doing pull-ups and scaling buldings, but I think their skills are just as impressive. Clear Goals Batman is driven to build a better Gotham. He knows that the criminal who killed his parents was a small-time thief, not a super villain – so he has larger goals in mind than simply chasing one villain. He wants his city as a whole to be better. Developers are also driven to make things better. It can be easy to get hung up on one problem, but in the end it is best to focus on the well-being of the system as a whole. Ultimate Teamplayers Batman is the hero Gotham needs – even when that means appearing to be the bad guys. Developers probably know that feeling well. Batman takes the fall for a crime he didn’t commit, and developers often have to deliver bad news about the limitations of their networks and servers. It’s not always a job filled with glory and thanks, but someone has to do it. Always Ready Batman and the Boy Scouts have this in common – they are always prepared. Let’s add developers to this list. Batman has an amazing tool belt with gadgets and gizmos, and let’s not even get into all the functions of the Batmobile! Developers’ skills might be the knowledge and skills they have developed, not tools they can carry in a utility belt, but that doesn’t make them any less impressive. 100% Dedication Bruce Wayne cultivates the personality of a playboy, never keeping the same girlfriend for long and spending his time partying. Even though he hides it, his driving force is his deep concern and love for his friends and the city as a whole. Developers also care a lot about their company and employees – even when it is driving them crazy. You do your best work when you care about your job on a personal level. Quality Output Batman believes the city deserves to be saved. The citizens might have a love-hate relationship with both Batman and Bruce Wayne, and employees might not always appreciate developers. Batman and developers, though, keep working for the best of everyone. I hope you are all enjoying reading about developers-as-superheroes as much as I am enjoying writing about them. Please tell me how else developers are like Superheroes in the comments – especially if you know any developers who are faster than a speeding bullet and can leap tall buildings in a single bound. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL Tagged: Developer, Superhero

Read the article

Oracle Announces Oracle Exadata X3 Database In-Memory Machine

- by jgelhaus

Fourth Generation Exadata X3 Systems are Ideal for High-End OLTP, Large Data Warehouses, and Database Clouds; Eighth-Rack Configuration Offers New Low-Cost Entry Point ORACLE OPENWORLD, SAN FRANCISCO – October 1, 2012 News Facts During his opening keynote address at Oracle OpenWorld, Oracle CEO, Larry Ellison announced the Oracle Exadata X3 Database In-Memory Machine - the latest generation of its Oracle Exadata Database Machines. The Oracle Exadata X3 Database In-Memory Machine is a key component of the Oracle Cloud. Oracle Exadata X3-2 Database In-Memory Machine and Oracle Exadata X3-8 Database In-Memory Machine can store up to hundreds of Terabytes of compressed user data in Flash and RAM memory, virtually eliminating the performance overhead of reads and writes to slow disk drives, making Exadata X3 systems the ideal database platforms for the varied and unpredictable workloads of cloud computing. In order to realize the highest performance at the lowest cost, the Oracle Exadata X3 Database In-Memory Machine implements a mass memory hierarchy that automatically moves all active data into Flash and RAM memory, while keeping less active data on low-cost disks. With a new Eighth-Rack configuration, the Oracle Exadata X3-2 Database In-Memory Machine delivers a cost-effective entry point for smaller workloads, testing, development and disaster recovery systems, and is a fully redundant system that can be used with mission critical applications. Next-Generation Technologies Deliver Dramatic Performance Improvements Oracle Exadata X3 Database In-Memory Machines use a combination of scale-out servers and storage, InfiniBand networking, smart storage, PCI Flash, smart memory caching, and Hybrid Columnar Compression to deliver extreme performance and availability for all Oracle Database Workloads. Oracle Exadata X3 Database In-Memory Machine systems leverage next-generation technologies to deliver significant performance enhancements, including: Four times the Flash memory capacity of the previous generation; with up to 40 percent faster response times and 100 GB/second data scan rates. Combined with Exadata’s unique Hybrid Columnar Compression capabilities, hundreds of Terabytes of user data can now be managed entirely within Flash; 20 times more capacity for database writes through updated Exadata Smart Flash Cache software. The new Exadata Smart Flash Cache software also runs on previous generation Exadata systems, increasing their capacity for writes tenfold; 33 percent more database CPU cores in the Oracle Exadata X3-2 Database In-Memory Machine, using the latest 8-core Intel® Xeon E5-2600 series of processors; Expanded 10Gb Ethernet connectivity to the data center in the Oracle Exadata X3-2 provides 40 10Gb network ports per rack for connecting users and moving data; Up to 30 percent reduction in power and cooling. Configured for Your Business, Available Today Oracle Exadata X3-2 Database In-Memory Machine systems are available in a Full-Rack, Half-Rack, Quarter-Rack, and the new low-cost Eighth-Rack configuration to satisfy the widest range of applications. Oracle Exadata X3-8 Database In-Memory Machine systems are available in a Full-Rack configuration, and both X3 systems enable multi-rack configurations for virtually unlimited scalability. Oracle Exadata X3-2 and X3-8 Database In-Memory Machines are fully compatible with prior Exadata generations and existing systems can also be upgraded with Oracle Exadata X3-2 servers. Oracle Exadata X3 Database In-Memory Machine systems can be used immediately with any application certified with Oracle Database 11g R2 and Oracle Real Application Clusters, including SAP, Oracle Fusion Applications, Oracle’s PeopleSoft, Oracle’s Siebel CRM, the Oracle E-Business Suite, and thousands of other applications. Supporting Quotes “Forward-looking enterprises are moving towards Cloud Computing architectures,” said Andrew Mendelsohn, senior vice president, Oracle Database Server Technologies. “Oracle Exadata’s unique ability to run any database application on a fully scale-out architecture using a combination of massive memory for extreme performance and low-cost disk for high capacity delivers the ideal solution for Cloud-based database deployments today.” Supporting Resources Oracle Press Release Oracle Exadata Database Machine Oracle Exadata X3-2 Database In-Memory Machine Oracle Exadata X3-8 Database In-Memory Machine Oracle Database 11g Follow Oracle Database via Blog, Facebook and Twitter Oracle OpenWorld 2012 Oracle OpenWorld 2012 Keynotes Like Oracle OpenWorld on Facebook Follow Oracle OpenWorld on Twitter Oracle OpenWorld Blog Oracle OpenWorld on LinkedIn Mark Hurd's keynote with Andy Mendelsohn and Juan Loaiza - - watch for the replay to be available soon at http://www.youtube.com/user/Oracle or http://www.oracle.com/openworld/live/on-demand/index.html

Read the article

Java Spotlight Episode 108: Patrick Curran and Heather VanCura on JCP.Next @jcp_org

- by Roger Brinkley

Interview with Patrick Curran and Heather VanCura on JCP.Next. Right-click or Control-click to download this MP3 file. You can also subscribe to the Java Spotlight Podcast Feed to get the latest podcast automatically. If you use iTunes you can open iTunes and subscribe with this link: Java Spotlight Podcast in iTunes. Show Notes News Welcome to the newly merged JCP EC! The November/December issue of Java Magazine is now out Red Hat announces intent to contribute to OpenJFX New OpenJDK JEPs: JEP 168: Network Discovery of Manageable Java Processes JEP 169: Value Objects Java EE 7 Survey Latest Java EE 7 Status GlassFish 4.0 Embedded (via @agoncal) Events Nov 13-17, Devoxx, Antwerp, Belgium Nov 20, JCP Public Meeting (see details below) Nov 20-22, DOAG 2012, Nuremberg, Germany Dec 3-5, jDays, Göteborg, Sweden Dec 4-6, JavaOne Latin America, Sao Paolo, Brazil Dec 14-15, IndicThreads, Pune, India Feature InterviewPatrick Curran is Chair of the Java Community Process organization. In this role he oversees the activities of the JCP's Program Management Office including evolving the process and the organization, managing its membership, guiding specification leads and experts through the process, chairing Executive Committee meetings, and managing the JCP.org web site.Patrick has worked in the software industry for more than 25 years, and at Sun and then Oracle for 20 years. He has a long-standing record in conformance testing, and before joining the JCP he led the Java Conformance Engineering team in Sun's Client Software Group. He was also chair of Sun's Conformance Council, which was responsible for defining Sun's policies and strategies around Java conformance and compatibility.Patrick has participated actively in several consortia and communities including the W3C (as a member of the Quality Assurance Working Group and co-chair of the Quality Assurance Interest Group), and OASIS (as co-chair of the Test Assertions Guidelines Technical Committee). Patrick's blog is here.Heather VanCura manages the JCP Program Office and is responsible for the day-to-day nurturing, support, and leadership of the community. She oversees the JCP.org web site, JSR management and posting, community building, events, marketing, communications, and growth of the membership through new members and renewals. Heather has a front row seat for studying trends within the community and recommending changes. Several changes to the program in recent years have included enabling broader participation, increased transparency and agility in JSR development. When Heather joined the PMO staff in a community building marketing manager role for the JCP program, she was responsible for establishing the JCP brand logo programs, the JCP.org site, and engaging the community in online surveys and usability studies. She also developed marketing reward programs, campaigns, sponsorships, and events for the JCP program, including the community gathering at the annual JavaOne Conference. Before arriving at the JCP community in 2000, Heather worked with various technology companies. Heather enjoys speaking at conferences, such as Devoxx, Java Zone, and the JavaOne Conferences. She maintains the JCP Blog, Twitter feed (@jcp_org) and Facebook page. Heather resides in the San Francisco Bay Area, California USA. JCP Executive Committee Public Meeting Details Date & Time Tuesday November 20, 2012, 3:00 - 4:00 pm PST Location Teleconference Dial-in +1 (866) 682-4770 Conference code: 627-9803 Security code: 52732 ("JCPEC" on your phone handset) For global access numbers see http://www.intercall.com/oracle/access_numbers.htm Or +1 (408) 774-4073 WebEx Browse for the meeting from https://jcp.webex.com No registration required (enter your name and email address) Password: JCPEC Agenda JSR 355 (the EC merge) implementation report JSR 358 (JCP.next.3) status report 2.8 status update and community audit program Discussion/Q&A Note The call will be recorded and the recording published on jcp.org, so those who are unable to join in real-time will still be able to participate. September 2012 EC meeting PMO report with JCP 2.8 statistics.JSR 358 Project page What’s Cool Sweden: Hot Java in the Winter GE Engergy using Invoke Daynamic for embedded development

Read the article

Oracle Functional Testing Suite Advanced Pack for Oracle EBS Now Available

- by Anne Carlson (Oracle Development)

There’s new news about automated testing of E-Business Suite using the Oracle Application Testing Suite, a.k.a, “OATS”. E-Business Suite Development is pleased to announce the availability of the new Oracle Functional Testing Suite Advanced Pack for Oracle E-Business Suite. The new pack, available with the latest release of Oracle Application Testing Suite (12.4.0.2), provides pre-built test components and flows to automate the in-depth testing of Oracle E-Business Suite applications. Designed for use with the Oracle Application Testing Suite and its Oracle Flow Builder capability, these pre-built components and flows can help Oracle E-Business Suite customers to significantly reduce the time and effort needed to create and maintain automated test scripts. The Oracle Functional Testing Suite Advanced Pack for Oracle E-Business Suite is available now for EBS 12.1.3, and availability for EBS 12.2 is planned. Some Background on Automating Testing with Oracle Application Testing Suite and Oracle Flow Builder Testing complex packaged applications like Oracle E-Business Suite can be time-consuming and challenging for organizations, hampering their ability to upgrade to latest releases or apply latest patches. Oracle Application Testing Suite offers organizations a unique and powerful testing platform for Oracle E-Business Suite and other Oracle applications. With the 12.3.0.1 release of Oracle Application Testing Suite, we introduced the Oracle Flow Builder testing framework and accompanying starter pack of pre-built test components and flows. The starter pack, which contains over 2000 components and 200 flows, provides broad coverage of commonly-used base functionality and is designed to jump-start the test automation effort. Using Oracle Flow Builder, even non-technical testers can create working test scripts using the pre-built components that Oracle provides. Each component represents an atomic test operation such as “create an invoice batch” or “apply an invoice hold.” Testers can assemble the pre-built components into test flows, and combine test flows with spreadsheet data to drive the testing of multiple data conditions. The Oracle Flow Builder framework allows customers to add, modify and extend the pre-built components to address new functionality and customizations of the Oracle E-Business Suite. Using Oracle Flow Builder’s component-based test generation framework instead of a traditional record/playback approach has allowed the EBS Quality Assurance team to reduce their test automation effort by 60%. E-Business Suite customers can significantly reduce their test automation effort using Oracle Application Testing Suite with Oracle Flow Builder and the pre-built test components and flows that Oracle provides. Oracle Functional Testing Suite Advanced Pack for Oracle E-Business Suite Improves Test Coverage With the Oracle Application Testing Suite 12.4.0.2 and the new Oracle Functional Testing Suite Advanced Pack for Oracle E-Business Suite, we are now delivering a significant number of additional test components and flows beyond those contained in the Oracle Flow Builder starter pack. These additional test components and flows provide 70-80% test coverage and enable the automation of detailed and complex test flows across the following Oracle E-Business Suite products: Oracle Asset Lifecycle Management Oracle Channel Revenue Management Oracle Discrete Manufacturing Oracle Incentive Compensation Oracle Lease and Finance Management Oracle Process Manufacturing Oracle Procurement Oracle Project Management Oracle Property Manager Oracle Service Downloads You can download the Oracle Functional Testing Suite Advanced Pack for Oracle E-Business Suite from the Oracle Technology Network. References Oracle Applications Testing Suite YouTube: Oracle Flow Builder Training YouTube: Oracle Applications Testing Suite and Flow Builder Demonstration Oracle Functional Testing Suite Advanced Pack Readme for E-Business Suite, id=1905989.1">Note 1905989.1 Related Articles Automate Testing Using Oracle Application Testing Suite with Flow Builder for E-Business Suite EBS 12.1.1 Test Starter Kit Now Available for Oracle Applications Testing Suite Oracle Application Testing Suite 9.0 Supported with Oracle E-Business Suite Using the Oracle Application Testing Suite with EBS: Interim Update #1

Read the article

Social Media Talk: Facebook, Really?? How Has It Become This Popular??

- by david.talamelli

If you have read some of my previous posts over the past few years either here or on my personal blog David's Journal on Tap you will know I am a Social Media enthusiast. I use various social media sites everday in both my work and personal life. I was surprised to read today on Mashable.com that Facebook now Commands 41% of Social Media Trafic. When I think of the Social Media sites I use most, the sites that jump into my mind first are LinkedIn, Blogging and Twitter. I do use Facebook in both work and in my personal life but on the list of sites I use it probably ranks closer to the bottom of the list rather than the top. I know Facebook is engrained in everything these days - but really I am not a huge Facebook fan - and I am finding that over the past 3-6 months my interest in Facebook is going down rather than up. From a work perspective - SM sites let me connect with candidates and communities and they help me talk about the things that I am doing here at Oracle. From a personal perspective SM sites let me keep in touch with friends and family both here and overseas in a really simple and easy way. Sites like LinkedIn give me a great way to proactively talk to both active and passive candidates. Twitter is fantastic to keep in touch with industry trends and keep up to date on the latest trending topics as well as follow conversations about whatever keyword you want to follow. Blogging lets me share my thoughts and ideas with others and while FB does have some great benefits I don't think the benefits outweigh the negatives of using FB. I use TweetDeck to keep track of my twitter feeds, the latest LinkedIn updates and Facebook updates. Tweetdeck is a great tool as it consolidates these 3 SM sites for me and I can quickly scan to see the latest news on any of them. From what I have seen from Facebook it looks like 70%-80% of people are using FB to grow their farm on farmville, start a mafia war on mafiawars or read their horoscope, check their love percentage, etc...... In between all these "updates" every now and again you do see a real update from someone who actually has something to say but there is so much "white noise" on FB from all the games and apps that is hard to see the real messages from all the 'games' information. I don't like having to scroll through what seems likes pages of farmville updates only to get one real piece of information. For me this is where FB's value really drops off. While I use SM everyday I try to use SM effectively. Sifting through so much noise is not effective and really I am not all that interested in Farmville, MafiaWars or any similar game/app. But what about Groups and Facebook Ads?? Groups are ok, but I am not sure I would call them SM game changers - yes there is a group for everything out there, but a group whether it is on FB or not is only as good as the community that supports and participates in it. Many of the Groups on FB (and elsewhere) are set up and never used or promoted by the moderator. I have heard that FB ads do have an impact, and I have not really looked at them - the question of cost jumps and return on investment comes to my mind though. FB does have some benefits, it is a great way to keep in touch with people and a great way to talk to others. I think it would have been interesting to see a different statistic measuring how effective that 41% of Social Media Traffic via FB really is or is it just a case of more people jumping online to play games. To me FB does not equal SM effectiveness, at the moment it is a tool that I sometimes need to use as opposed to want to use. This article was originally posted on David Talamelli's Blog - David's Journal on Tap

Read the article

5 Steps to getting started with IronRuby

- by Eric Nelson

IronRuby is a Open Source implementation of the Ruby programming language for .NET, heavily relying on Microsoft's Dynamic Language Runtime. The project's #1 goal is to be a true Ruby implementation, meaning it runs existing Ruby code. Check out this summary of using the Ruby standard library and 3rd party libraries in IronRuby. IronRuby has tight integration with .NET, so any .NET types can be used from IronRuby and the IronRuby runtime can be embedded into any .NET application. These 5 steps should get you nicely up and running on IronRuby – OR … you could just watch a video session from the lead developer which took place earlier this month (March 2010 - 60mins). But the 5 steps will be quicker :-) Step 1 – Install IronRuby :-) You can install IronRuby automatically using an MSI or manually. For simplicity I would recommend the MSI install. TIP: As of the 25th of March IronRuby has not quite shipped. The download above is a Release Candidate (RC) which means it is still undergoing final testing by the team. You will need to uninstall this version (RC3) once the final release is available. The good news is that uninstalling IronRuby RC3 will work without a hitch as the MSI does relatively little. Step 2 – Install an IronRuby friendly editor You will need to Install an editor to work with IronRuby as there is no designer support for IronRuby inside Visual Studio. There are many editors to choose from but I would recommend you either went with: SciTE (Download the MSI): This is a lightweight text editor which is simple to get up and running. SciTE understands Ruby syntax and allows you to easily run IronRuby code within the editor with a small change to the config file. SharpDevelop 3.2 (Download the MSI): This is an open source development environment for C#, VB, Boo and now IronRuby. IronRuby support is new but it does include integrated debugging. You might also want to check out the main site for SharpDevelop. TIP: There are commercial tools for Ruby development which offer richer support such as intellisense.. They can be coerced into working with IronRuby. A good one to start with is RubyMine which needs some small changes to make it work with IronRuby. Step 3 – Run the IronRuby Tutorial Run through the IronRuby tutorial which is included in the IronRuby download. It covers off the basics of the Ruby languages and how IronRuby integrates with .NET. In a typical install it will end up at C:\Program Files\IronRuby 0.9.4.0\Samples\Tutorial. Which will give you the tutorial implemented in .NET and Ruby. TIP: You might also want to check out these two introductory posts Using IronRuby and .NET to produce the ‘Hello World of WPF’ and What's IronRuby, and how do I put it on Rails? Step 4 – Get some good books to read Get a great book on Ruby and IronRuby. There are several free ebooks on Ruby which will help you learn the language. The little book of Ruby is a good place to start. I would also recommend you purchase IronRuby Unleashed (Buy on Amazon UK | Buy on Amazon USA). You might also want to check out this mini-review. Other books are due out soon including IronRuby in Action. TIP: Also check out the official documentation for using .NET from IronRuby. Step 5 – Keep an eye on the team blogs Keep an eye on the IronRuby team blogs including Jimmy Schementi, Jim Deville and Tomas Matousek (full list) TIP: And keep a watch out for the final release of IronRuby – due anytime soon!

Read the article

What I don’t like about WIF’s Claims-based Authorization

- by Your DisplayName here!

In my last post I wrote about what I like about WIF’s proposed approach to authorization – I also said that I definitely would build upon that infrastructure for my own systems. But implementing such a system is a little harder as it could be. Here’s why (and that’s purely my perspective): First of all WIF’s authorization comes in two “modes” Per-request authorization. When an ASP.NET/WCF request comes in, the registered authorization manager gets called. For SOAP the SOAP action gets passed in. For HTTP requests (ASP.NET, WCF REST) the URL and verb. Imperative authorization This happens when you explicitly call the claims authorization API from within your code. There you have full control over the values for action and resource. In ASP.NET per-request authorization is optional (depends on if you have added the ClaimsAuthorizationHttpModule). In WCF you always get the per-request checks as soon as you register the authorization manager in configuration. I personally prefer the imperative authorization because first of all I don’t believe in URL based authorization. Especially in the times of MVC and routing tables, URLs can be easily changed – but then you also have to adjust your authorization logic every time. Also – you typically need more knowledge than a simple “if user x is allowed to invoke operation x”. One problem I have is, both the per-request calls as well as the standard WIF imperative authorization APIs wrap actions and resources in the same claim type. This makes it hard to distinguish between the two authorization modes in your authorization manager. But you typically need that feature to structure your authorization policy evaluation in a clean way. The second problem (which is somehow related to the first one) is the standard API for interacting with the claims authorization manager. The API comes as an attribute (ClaimsPrincipalPermissionAttribute) as well as a class to use programmatically (ClaimsPrincipalPermission). Both only allow to pass in simple strings (which results in the wrapping with standard claim types mentioned earlier). Both throw a SecurityException when the check fails. The attribute is a code access permission attribute (like PrincipalPermission). That means it will always be invoked regardless how you call the code. This may be exactly what you want, or not. In a unit testing situation (like an MVC controller) you typically want to test the logic in the function – not the security check. The good news is, the WIF API is flexible enough that you can build your own infrastructure around their core. For my own projects I implemented the following extensions: A way to invoke the registered claims authorization manager with more overloads, e.g. with different claim types or a complete AuthorizationContext. A new CAS attribute (with the same calling semantics as the built-in one) with custom claim types. A MVC authorization attribute with custom claim types. A way to use branching – as opposed to catching a SecurityException. I will post the code for these various extensions here – so stay tuned.

Search Results

Search found 12183 results on 488 pages for 'general news'.

Page 322/488 | < Previous Page | 318 319 320 321 322 323 324 325 326 327 328 329 | Next Page >

- by user1526570

- by hnasarat

- by Polymer

- by black sensei

- by Jeremy

- by prince23

- by dubbeat

- by Huw

- by Changqi

- by iconiK

- by John Nicholas

- by Az

- by Jeppe Stig Nielsen

- by BillW

- by j_random_hacker

- by Pinal Dave

- by ScottGu

- by João Angelo

- by Pinal Dave

- by jgelhaus

- by Roger Brinkley

- by Anne Carlson (Oracle Development)

- by david.talamelli

- by Eric Nelson

- by Your DisplayName here!

< Previous Page | 318 319 320 321 322 323 324 325 326 327 328 329 | Next Page >