Search Results

Search found 10572 results on 423 pages for 'learning plan'.

Page 322/423 | < Previous Page | 318 319 320 321 322 323 324 325 326 327 328 329  | Next Page >

• Merging the Executive Committees

  - by Patrick Curran

  As I explained in this blog last year, we use the Process to change the Process. The first of three planned JSRs to modify the way the JCP operates (JSR 348: Towards a new version of the Java Community Process) completed in October 2011. That JSR focused on changes to make our process more transparent and to enable broader participation. The second JSR was inspired by our conviction that Java is One Platform and by our expectation that Java ME and Java SE will become more aligned over time. In anticipation of this change JSR 355: JCP Executive Committee Merge will merge the two Executive Committees into one. The JSR is going very well. We have reached consensus within the Executive Committees, which serve as the Expert Group for process-change JSRs. How we intend to make the transition to a single EC is explained in the revised versions of the Process and EC Standing Rules documents that are currently posted for Early Draft Review. Our intention is to reduce the total number of EC seats but to keep the same ratio (2:1) of ratified and elected seats. Briefly, the plan will be implemented in two stages. The October 2012 elections will be held as usual, but candidates will be informed that they will serve only a one-year term if elected. The two ECs will be merged immediately after this election; at the same time, Oracle's second permanent seat and one of IBM's two ratified seats will be eliminated. The initial merged EC will therefore have 30 members. In the October 2013 elections we will eliminate three more ratified seats and two elected seats, thereby reducing the size of the combined EC to 25 members (16 ratified seats, 8 elected seats, plus Oracle's permanent seat.) All remaining seats, including those of members who were elected in 2012, will be up for re-election in 2013; that election should be particularly interesting. Starting in 2013 we will change from a three-year to a two-year election cycle (half of all EC members will be up for re-election each year.) We believe that these changes will streamline our operations, and position us for a future in which the distinctions between desktop and mobile devices become increasingly blurred. Please take this opportunity to review and comment on our proposed changes - we appreciate your input. Thank you, and onward to JCP.next.3!

  Read the article

• Understanding exceptional cases

  - by Justin

  I've been studying the use of exceptions in various php projects (such as Doctrine and Zend Framework). Exceptions seem to be thrown when unordinary input/state occurs. A perfect example is Doctrine throwing an exception when you try to use a invalid query string. I think the creators of the doctrine api understood that first, you can't query data by using an invalid DQL statement, and a developer should immediately be warned that an error has occurred, rather then letting execution continue with the possibility of an error code going un-checked. I also bet that this simplifies reading the code. I can't think of a situation where you would want to use an invalid DQL statement, except unit testing. Since this is true, it's better to avoid plaguing a bunch of code with null/error checks and use exceptions. I've read in books that exceptions shouldn't be thrown when validating dating user input. I've seen examples where of where the guideline is broken. One example is the Zend framework. If supplying an invalid controller or action name, an exception is thrown. Unlike doctrine, the user has more direct control over this sort of input. I know you can configure an error controller and set up a 404 message or what have you, but I'm curious why they have used an exception in this scenario? I guess you can argue the Zend Framework does not know how to continue processing the quest. One last example Is I wrote a function to return some html based on a given resource type. This resource type is hard-coded and sent when a user interacts with a web site (such as clicking a button to display the form to input data). I don't expect users to be mucking around with the request type. Under normal operating conditions, the resource type should be valid. To clean up some logic, I was going to throw an exception if a particular form wasn't found. This is mainly to find the correct form associated with a resource type so proper validation can occur. Does this sound like a valid use case for an exception? Right now it's pretty trivial, but I do plan to implement a restful consumer and re-using a function to map resources to their validation services would be very useful. I can then catch the exception and based on the consumer, return an error message suitable for the request type...

  Read the article

• Ubuntu 12.4.1 failing in vm both Vbox and Vmware on new HP Envy 4t-1000

  - by Chas

  Brand new to Linux, getting frustrated trying to get an environment up with Ubuntu. My primary goal is to learn Linux and Apache/PHP development. I need to keep my Windows OS as main on my machine for work, so i'm trying to virtualize Ubuntu 12.4.1 without luck (many attempts). I have a new HP Envy 4t-1000 with 16gb ram, and 32 gb ssd caching with 500gb spindle hard drive. Graphics card is an Intel HD 3000 with AMD Radeon 7670M. With installing Ubuntu desktop in VBox, I'm getting this result: https://forums.virtualbox.org/viewtopic.php?f=6&t=51939 With VMware workstation 7 (patched), I complete the install of Ubuntu, it reboots, purple desktop briefly flashes then it drops to command line. I bought a beginning Ubuntu book, and it recommends trying to manually configure graphics if this happens. So I tried doing a safe boot holding shift - I get to the first screen (GRUB) loads fine, and I choose recovery mode. After choosing the recovery mode, I get the recovery mode options, and can arrow down to what the book suggests 'Run in fail safe graphic mode.' Once I select this option, I get a black screen with a large white dialogue box, at the top it says "The system is running in low-graphics mode. Your screen, graphics card, and input device settings could not be detected correctly. You will need to configure these yourself." Then there is an ok button way down at the bottom. When I select 'ok' I get a menu for a few options, book recommended 'reconfigure graphics.' When I try this, I get a menu of two options: 1) "Use generic (default) configuration or 2) use backup. I've tried both options several times, hitting ok just refreshes screen and nothing more. Rebooting at this point just goes back to command line as before. I don't know what to do at this point, I've spent too many hours this weekend trying in both VBox and VMware to get Ubuntu going. Isn't there like a very basic graphic display or something I can use to at least get into the desktop? I explored the GRUB some more, and tried to look at the startup and xserver logs - both are blank. No help there I guess? When I try to choose 'Edit the configuration file, then 'ok' screen just refreshes on same menu options, nothing happens. thx for any advice. I really need to focus on learning Linux, Apache and PHP, so perhaps Ubuntu just won't work on my hardware? Any other suggestions? I will need to virtualize - THANKS for any help/advice.

  Read the article

• PASS: FY10 Actuals Posted

  - by Bill Graziano

  Earlier this year we published preliminary fiscal year 2010 financials to the Governance page on the PASS web site.  Please remember that FY10 runs from July 1st, 2009 through June 30th, 2010 and includes the November 2009 Summit.  We do our fiscal year this way so that the Summit falls earlier in the fiscal year.  The financials we had posted were P&L numbers at the portfolio level.  Prior to this we had posted our detailed budget but only posted the auditors report at the end of each year.  Today we updated our published financials to include: Pre-audit actuals from FY10 at the same level as our budget.  The document has both actuals and budget for FY10 side by side.  This is over 20 pages of detailed financial information covering hundreds of line-items. A letter describing key differences between our budget and actuals.  I walked through each line item where the difference was greater than $25,000 and explained what happened and why. We updated the financial graph going back to 2003 to include FY10. This update should “close the loop” on our financials.  You can now start with the published budget and compare it to the finished financials at the same level of detail.  We also plan to publish the auditor’s report when that is completed -- as we do every year. Overall I’m very happy with how FY10 turned out.  Keep in mind that this was the November 2009 Summit so we were still facing economic challenges.  With all that we were roughly break-even showing a $15,000 profit on $3.9 million of revenue.  I didn’t find anything shocking in reviewing our actual vs. budget but there were a few things that needed explanation.  You can see those in the letter on the governance page. Please keep in mind that these are the actuals from our operating financials.  The auditor may have us make adjustments for depreciation or other financial transactions.  We may also account for certain transactions differently for tax purposes than we do for financial reporting purposes.  I feel these financial statements give you the clearest picture of how our organization spends its money. We were late publishing these this year.  We were working through some tax issues and that delayed our ability to file our final tax forms which delayed this process.  In hindsight I should have published these documents as soon as we had them and not waited for the tax issues.  We’ll do this better in the future. And on a final note, you don’t need to login to view these documents.  If you have any questions you can post them here.  If we get more than a few questions we may see about creating some forums for financial issues on the PASS web site.

  Read the article

• GLSL per pixel lighting with custom light type

  - by Justin

  Ok, I am having a big problem here. I just got into GLSL yesterday, so the code will be terrible, I'm sure. Basically, I am attempting to make a light that can be passed into the fragment shader (for learning purposes). I have four input values: one for the position of the light, one for the color, one for the distance it can travel, and one for the intensity. I want to find the distance between the light and the fragment, then calculate the color from there. The code I have gives me a simply gorgeous ring of light that get's twisted and widened as the matrix is modified. I love the results, but it is not even close to what I am after. I want the light to be moved with all of the vertices, so it is always in the same place in relation to the objects. I can easily take it from there, but getting that to work seems to be impossible with my current structure. Can somebody give me a few pointers (pun not intended)? Vertex shader: attribute vec4 position; attribute vec4 color; attribute vec2 textureCoordinates; varying vec4 colorVarying; varying vec2 texturePosition; varying vec4 fposition; varying vec4 lightPosition; varying float lightDistance; varying float lightIntensity; varying vec4 lightColor; void main() { vec4 ECposition = gl_ModelViewMatrix * gl_Vertex; vec3 tnorm = normalize(vec3 (gl_NormalMatrix * gl_Normal)); fposition = ftransform(); gl_Position = fposition; gl_TexCoord[0] = gl_MultiTexCoord0; fposition = ECposition; lightPosition = vec4(0.0, 0.0, 5.0, 0.0) * gl_ModelViewMatrix * gl_Vertex; lightDistance = 5.0; lightIntensity = 1.0; lightColor = vec4(0.2, 0.2, 0.2, 1.0); } Fragment shader: varying vec4 colorVarying; varying vec2 texturePosition; varying vec4 fposition; varying vec4 lightPosition; varying float lightDistance; varying float lightIntensity; varying vec4 lightColor; uniform sampler2D texture; void main() { float l_distance = sqrt((gl_FragCoord.x * lightPosition.x) + (gl_FragCoord.y * lightPosition.y) + (gl_FragCoord.z * lightPosition.z)); float l_value = lightIntensity / (l_distance / lightDistance); vec4 l_color = vec4(l_value * lightColor.r, l_value * lightColor.g, l_value * lightColor.b, l_value * lightColor.a); vec4 color; color = texture2D(texture, gl_TexCoord[0].st); gl_FragColor = l_color * color; //gl_FragColor = fposition; }

  Read the article

• Getting started with object detection - Image segmentation algorithm

  - by Dev Kanchen

  Just getting started on a hobby object-detection project. My aim is to understand the underlying algorithms and to this end the overall accuracy of the results is (currently) more important than actual run-time. I'm starting with trying to find a good image segmentation algorithm that provide a good jump-off point for the object detection phase. The target images would be "real-world" scenes. I found two techniques which mirrored my thoughts on how to go about this: Graph-based Image Segmentation: http://www.cs.cornell.edu/~dph/papers/seg-ijcv.pdf Contour and Texture Analysis for Image Segmentation: http://www.eng.utah.edu/~bresee/compvision/files/MalikBLS.pdf The first one was really intuitive to understand and seems simple enough to implement, while the second was closer to my initial thoughts on how to go about this (combine color/intensity and texture information to find regions). But it's an order of magnitude more complex (at least for me). My question is - are there any other algorithms I should be looking at that provide the kind of results that these two, specific papers have arrived at. Are there updated versions of these techniques already floating around. Like I mentioned earlier, the goal is relative accuracy of image segmentation (with an eventual aim to achieve a degree of accuracy of object detection) over runtime, with the algorithm being able to segment an image into "naturally" or perceptually important components, as these two algorithms do (each to varying extents). Thanks! P.S.1: I found these two papers after a couple of days of refining my search terms and learning new ones relevant to the exact kind of techniques I was looking for. :) I have just about reached the end of my personal Google creativity, which is why I am finally here! Thanks for the help. P.S.2: I couldn't find good tags for this question. If some relevant ones exist, @mods please add them. P.S.3: I do not know if this is a better fit for cstheory.stackexchange (or even cs.stackexchange). I looked but cstheory seems more appropriate for intricate algorithmic discussions than a broad question like this. Also, I couldn't find any relevant tags there either! But please do move if appropriate.

  Read the article

• Collaborative work (small team) - Best practices

  - by LEM01

  I'm currently working in a very small team of programmers (2-3) and I'm looking for advices/best practices on how to organise our work. We're all working on the same application using PHP. Today we're kind of all working on our way. Today situation: List item that have to be worked on by each dev 1/week. What has to be done is defined at a high functional level (ex: Build the search engine for this product..) Commit / merge our individual branches (git) every week before the next meeting No real dev rules, no code review No test written (aouutch) Problems faced: Code quality issue: discovering someone else code is sometime tough (inline, variable+function+class names, spaces, comments..) Changes in already existing classes (impact on someone else work) Responsibility of each dev unclear: after getting someone else code and discover something messy, should I make the change? Should he make the change? How to plan those things,... What I'm looking for: Basically I'm looking into structuring the way we develop things in order to avoid frustration and improve overall quality. How to define coding standards (naming convention, code rules...)? Do you you any validation script to make sure code is valid before committing? Do you think that defining an architect role in the team is needed? Someone that would actually define what has to be developed during the next phase. By defining interfaces or class descriptions that have to be written. (Does it make sense in such a small team?) Today we're losing time into understanding what others did or tried to do, we're also losing time in discussion like "you should have done it that way! Why is this class doing that and not that..? Shouldn't we have a embedded class rather that this set of data...". I'm looking into a work process, maybe with more defined responsibilities and process in order to improve our performance. If you have experience, advices, best practices or anything to share that we could benefit from it will be much appreciated! Thanks a lot for your time!

  Read the article

• Is this an effective monetization method for an Android game? [on hold]

  - by Matthew Page

  The short version: I plan to make an Android puzzle game where the user tries to get 3-6 numbers to their predetermined goal numbers. The free version of the app will have three predetermined levels (easy, medium, hard). The full version ($0.99, probably) will have a level generator where there will be unlimited easy, medium, or hard levels, as well as a custom difficulty option where users can set specific vales to the number of numbers to equate to their goal, the number of buttons to use, etc. Users will also have the option to get a one-time "hint" for a fee of $0.49, or unlimited hints for a one-time fee of $2.99. The long version: Mechanics of Game and Victory The application is a number puzzle. When the user begins a new game, depending on the input by the user, between 3 and 6 numbers show up on the top of the screen, and between 3 and 6 buttons show up on the bottom of the screen. The buttons all have two options: to increase every number the same way, or decrease every number the same way. The buttons either use addition / subtraction, multiplication / division, or exponents / roots, all depending on the number displayed on the button. Addition buttons are green, multiplication buttons are blue, and exponential buttons are red. The user wins when all of the numbers displayed on the screen equate to their goal number, displayed below each number. Monetization If the user is playing the full (priced) version of the app, upon the start of the game, the user will be confronted with a dialogue asking for the number of buttons and the number of numbers to equate in the game. Then, based on the user input, a random puzzle will be generated. If the user is playing the free version of the app, the user will be asked to either play an “easy”, “hard”, or “expert” puzzle. A pre-determined puzzle from each category will be used in the game. If the user has played that puzzle before, a dialogue will show saying this to the user and advertising the full version of the app. The full version of the app will also be advertised upon the successful or in successful completion of a puzzle. Upon exiting this advertisement, another full screen advertisement will appear from a third party. Also, the solution to the puzzle should be stored by the program, and if the user pays a small fee, he/she can see a hint to the solution to the program. In the free version of the app, the user may use their first hint for free. Also, the user can use unlimited hints for a slightly larger fee. Is this an effective monetization method?

  Read the article

• How can I create a flexible system for tiling a 2D RPG map?

  - by CptSupermrkt

  Using libgdx here. I've just finished learning some of the basics of creating a 2D environment and using an OrthographicCamera to view it. The tutorials I went through, however, hardcoded their tiled map in, and none made mention of how to do it any other way. By tiled map, I mean like Final Fantasy 1, where the world map is a grid of squares, each with a different texture. So for example, I've got a 6 tile x 6 tile map, using the following code: Array<Tile> tiles = new Array<Tile>(); tiles.add(new Tile(new Vector2(0,5), TileType.FOREST)); tiles.add(new Tile(new Vector2(1,5), TileType.FOREST)); tiles.add(new Tile(new Vector2(2,5), TileType.FOREST)); tiles.add(new Tile(new Vector2(3,5), TileType.GRASS)); tiles.add(new Tile(new Vector2(4,5), TileType.STONE)); tiles.add(new Tile(new Vector2(5,5), TileType.STONE)); //... x5 more times. Given the random nature of the environment, for loops don't really help as I have to start and finish a loop before I was able to do enough to make it worth setting up the loop. I can see how a loop might be helpful for like tiling an ocean or something, but not in the above case. The above code DOES get me my final desired output, however, if I were to decide I wanted to move a piece or swap two pieces out, oh boy, what a nightmare, even with just a 6x6 test piece, much less a 1000x1000 world map. There must be a better way of doing this. Someone on some post somewhere (can't find it now, of course) said to check out MapEditor. Looks legit. The question is, if that is the answer, how can I make something in MapEditor and have the output map plug in to a variable in my code? I need the tiles as objects in my code, because for example, I determine whether or not a tile is can be passed through or collided with based on my TileTyle enum variable. Are there alternative/language "native" (i.e. not using an outside tool) methods to doing this?

  Read the article

• WebLogic Partner Community Newsletter September 2012

  - by JuergenKress

  Dear WebLogic partner community member Happy Birthday to our WebLogic partner Community! We launched the community a year ago, it is growing fast with almost 1,000 members and with a significant impact in our business. The WebLogic partner revenue grew significant last fiscal year. I would like to thank you for your contribution. It is indeed a great opportunity for your WebLogic service revenue, like consulting, implementation or training. There will be thousands of opportunities at our joint customer base, like iAs to WebLogic migration, J2EE platform consolidation or private clouds. We will continue to highlight these opportunities in our newsletter and offer you campaign kits. Please feel free to let us know if you are interested. I would also recommend you to give us your feedback in our WebLogic Partner Community Survey 2012! Your feedback is very important for us. We continue to offer free WebLogic 12c Bootcamps across Europe. Please make sure you register asap for your local training! In addition to this we plan to offer Exalogic 2.01 Bootcamp. If you are interested to attend it then please add your details to our wiki. Our ExaLogic kit is updated with ExaLogic 2.01 ppt & training & Installation check-list & tips & Web tier roadmap. In case you want to learn more about ExaLogic, please visit Qualogy virtual demo center. We have not only released the latest version of Tuxedo 12c but Andrejus also made a Performance Audit Tool - Runtime Diagnosis for ADF Applications which is available now. We uploaded the latest WebLogic 12c and Glassfish ppt presentation for your customer meetings to the WebLogic Community Workspace (WebLogic Community membership required). Are you ready and prepared for Oracle Open World 2012? Make sure you read our tips and enjoy the conference! WebLogic Server 11gR1 Interactive Quick Reference is a wonderful online overview. Make sure you do not miss it! If you want to try WebLogic why not in the Oracle Cloud - Java Cloud Service. Our Java Guru Adam Bien published a new book Real World Java EE Patterns. If you use Java on your machine, Please make sure that you update your Java SE. Jürgen Kress Oracle WebLogic Partner Adoption EMEA To read the newsletter please visit http://tinyurl.com/WebLogicnewsSeptember2012 (OPN Account required) To become a member of the WebLogic Partner Community please register at http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: WebLogic Community newsletter,newsletter,WebLogic,WebLogic Community,Oracle,OPN,Jürgen Kress

  Read the article

• Website File and Folder Structure

  - by Drummss

  I am having a problem learning how proper website structure should be. And by that I mean how to code the pages and how folder structure should be. Currently I am navigating around my website using GET variables in PHP when you want go to another page, so I am always loading the index.php file. And I would load the page I wanted like so: $page = "error"; if(isset($_GET["page"]) AND file_exists("pages/".$_GET["page"].".php")) { $page = $_GET["page"]; } elseif(!isset($_GET["page"])) { $page = "home"; } And this: <div id="page"> <?php include("pages/".$page.".php"); ?> </div> The reason I am doing this is because it makes making new pages a lot easier as I don't have to link style sheets and javascript in every file like so: <head> <title> Website Name </title> <link href='http://fonts.googleapis.com/css?family=Lato:300,400' rel='stylesheet' type='text/css'> <link rel="stylesheet" href="css/style.css" type="text/css"> <link rel="shortcut icon" href="favicon.png"/> <script src="//ajax.googleapis.com/ajax/libs/jquery/1.11.0/jquery.min.js" type="text/javascript"></script> <script src="//ajax.googleapis.com/ajax/libs/jqueryui/1.10.4/jquery-ui.min.js" type="text/javascript"></script> </head> There is a lot of problems doing it this way as URLs don't look normal ("?page=apanel/app") if I am trying to access a page from inside a folder inside the pages folder to prevent clutter. Obviously this is not the only way to go about it and I can't find the proper way to do it because I'm sure websites don't link style sheets in every file as that would be very bad if you changed a file name or needed to add another file you would have to change it in every file. If anyone could tell me how it is actually done or point me towards a tutorial that would be great. Thanks for your time :)

  Read the article

• Organization &amp; Architecture UNISA Studies &ndash; Chap 13

  - by MarkPearl

  Learning Outcomes Explain the advantages of using a large number of registers Discuss the way in which compilers optimize register usage Discuss the evolution of CISC machines Describe the characteristics of RISC architecture Discuss the RISC vs. CISC controversy Describe the way in which RISC and CISC design principles can be combined Instruction Execution Characteristics To understand the the line of reasoning of RISC advocates, we need a brief overview of instruction execution characteristics. These include… Operations Operands Procedure Calls These three sections can be studied in depth in the textbook at pages 503 - 505 A number of groups have come up with the conclusion that the attempt to make the instruction set architecture closer to HLLs (High Level Languages) is not the most effective design strategy. Rather HLL’s can be best supported by optimizing performance of the most time-consuming features of typical HLL programs. Generally 3 main characteristics came up to improve performance… Use a large number of registers or use a compiler to optimize register usage Careful attention needs to be paid to the design of instruction pipelines A simplified (reduced) instruction set is indicated The use of a large register optimization One of the most important design principles of RISC machines is the use of a large number of registers. The concept of register windows and the use of a large register file versus the use of cache memory are discussed. On the face of it, the use of a large set of registers should decrease the need to access memory. The design task is to organize the registers in such a fashion that this goal is realized. Read page 507 – 510 for a detailed explanation. Compiler-based register optimization   Reduced Instructions Set Architecture There are two advantages to smaller programs… Because the program takes up less memory, there is a savings in that resource (this was more compelling when memory was more expensive) Smaller programs should improve performance, and this will happen in two ways – fewer instructions means fewer instruction bytes to be fetched and in a paging environment smaller programs occupy fewer pages, reducing page faults. Certain characteristics are common to RISC processors… One instruction per cycle Register-to-register operations Simple addressing modes Simple instruction formats RISC vs. CISC After initial enthusiasm for RISC machines, there has been a growing realization that RISC designs may benefit from the inclusion of some CISC features CISC designs may benefit from the inclusion of some RISC features

  Read the article

• What is the recommended way to output values to FBO targets? (OpenGL 3.3 + GLSL 330)

  - by datSilencer

  I'll begin by apologizing for any dumb assumptions you might find in the code below since I'm still pretty much green when it comes to OpenGL programming. I'm currently trying to implement deferred shading by using FBO's and their associated targets (textures in my case). I have a simple (I think :P) geometry+fragment shader program and I'd like to write its Fragment Shader stage output to three different render targets (previously bound by a call to glDrawBuffers()), like so: #version 330 in vec3 WorldPos0; in vec2 TexCoord0; in vec3 Normal0; in vec3 Tangent0; layout(location = 0) out vec3 WorldPos; layout(location = 1) out vec3 Diffuse; layout(location = 2) out vec3 Normal; uniform sampler2D gColorMap; uniform sampler2D gNormalMap; vec3 CalcBumpedNormal() { vec3 Normal = normalize(Normal0); vec3 Tangent = normalize(Tangent0); Tangent = normalize(Tangent - dot(Tangent, Normal) * Normal); vec3 Bitangent = cross(Tangent, Normal); vec3 BumpMapNormal = texture(gNormalMap, TexCoord0).xyz; BumpMapNormal = 2 * BumpMapNormal - vec3(1.0, 1.0, -1.0); vec3 NewNormal; mat3 TBN = mat3(Tangent, Bitangent, Normal); NewNormal = TBN * BumpMapNormal; NewNormal = normalize(NewNormal); return NewNormal; } void main() { WorldPos = WorldPos0; Diffuse = texture(gColorMap, TexCoord0).xyz; Normal = CalcBumpedNormal(); } If my render target textures are configured as: RT1:(GL_RGB32F, GL_RGB, GL_FLOAT, GL_TEXTURE0, GL_COLOR_ATTACHMENT0) RT2:(GL_RGB32F, GL_RGB, GL_FLOAT, GL_TEXTURE1, GL_COLOR_ATTACHMENT1) RT3:(GL_RGB32F, GL_RGB, GL_FLOAT, GL_TEXTURE2, GL_COLOR_ATTACHMENT2) And assuming that each texture has an internal format capable of contaning the incoming data, will the fragment shader write the corresponding values to the expected texture targets? On a related note, do the textures need to be bound to the OpenGL context when they are Multiple Render Targets? From some Googling, I think there are two other ways to output to MRTs: 1: Output each component to gl_FragData[n]. Some forum posts say this method is deprecated. However, looking at the latest OpenGL 3.3 and 4.0 specifications at opengl.org, the core profiles still mention this approach. 2: Use a typed output array variable for the expected type. In this case, I think it would be something like this: out vec3 [3] output; void main() { output[0] = WorldPos0; output[1] = texture(gColorMap, TexCoord0).xyz; output[2] = CalcBumpedNormal(); } So which is then the recommended approach? Is there a recommended approach at all if I plan to code on top of OpenGL 3.3? Thanks for your time and help!

  Read the article

• High-Powered Sites for low Cost

  - by HighAltitudeCoder

  Ahh, I am experiencing the intimidation of my very first post - visible by the whole world. Ok, here goes.   This first post is nothing exceptional.  It is simply a recommendation based (fittingly, I suppose) upon the job search you may be gearing up for.  I find myself in this very situation right now.  And, I will take my own recommendation after posting this entry. Job-Seekers: To the left you will notice two links under "Recommended Learning".  I have found these links to be invaluable when it comes to re-tooling, re-familiarizing, or otherwise resharping my skills when looking for that next job. Often, you will find job-postings with the text, usually posted after a laborious list of qualifications indicating the company's desire to hire candidates who know what they are doing: "...Looking for a candidate who can hit the ground running...".  The interesting thing about this post to me is I've encountered many individuals who, after speaking and working with them for some time, I've realized are perfectly capable of hitting the ground running - and FAST.  But what if they speed off in the wrong direction? The next time you spearhead a major task in your job, ask yourself: Am I headed in the wrong direction?  There are many ways to do this.  In fact, I've found in this new field there are more tempting ways to steer your project in the wrong direction than there are good ones.  I don't want to suggest that every one of my posts will fall into the "right direction" category, however I do think a healthy dose of introspection of the pros and cons will always be beneficial before you set off. That said, allow me to expound on the previously mentioned links. These web sites are invaluable.  They demonstrate the capabilities of existing as well as new and upcoming tools available in several IDE's.  I've viewed many tutorials in LearnVisualStudio.NET, and only one or two so far in TrainingSpot, however I've been delighted in their simplicity and straightforward approach to proper usage of the particular tool or concept being discussed.  They have not (so far in my experience) demonstrated ways in which to use the tools that become cumbersome, impractical, or error-prone. Each website has step-by-step videos that can be paused, replayed, and most importantly, they are done in real time.  As the author is typing, the viewer gets to experience the coding experience from a first-person perspective, including syntax errors, unexpected behaviors, IDE setup idiosyncracies, everything.  A subtle value I've gained from these videos is that a certain degree of confusion and introspection is normal when working with new tools and exploring new paths.  They (as well as your own experience) are not to be feared, but enjoyed.  I highly recommend them. Good work, guys!

  Read the article

• Entity Framework 5, separating business logic from model - Repository?

  - by bnice7

  I am working on my first public-facing web application and I’m using MVC 4 for the presentation layer and EF 5 for the DAL. The database structure is locked, and there are moderate differences between how the user inputs data and how the database itself gets populated. I have done a ton of reading on the repository pattern (which I have never used) but most of my research is pushing me away from using it since it supposedly creates an unnecessary level of abstraction for the latest versions of EF since repositories and unit-of-work are already built-in. My initial approach is to simply create a separate set of classes for my business objects in the BLL that can act as an intermediary between my Controllers and the DAL. Here’s an example class: public class MyBuilding { public int Id { get; private set; } public string Name { get; set; } public string Notes { get; set; } private readonly Entities _context = new Entities(); // Is this thread safe? private static readonly int UserId = WebSecurity.GetCurrentUser().UserId; public IEnumerable<MyBuilding> GetList() { IEnumerable<MyBuilding> buildingList = from p in _context.BuildingInfo where p.Building.UserProfile.UserId == UserId select new MyBuilding {Id = p.BuildingId, Name = p.BuildingName, Notes = p.Building.Notes}; return buildingList; } public void Create() { var b = new Building {UserId = UserId, Notes = this.Notes}; _context.Building.Add(b); _context.SaveChanges(); // Set the building ID this.Id = b.BuildingId; // Seed 1-to-1 tables with reference the new building _context.BuildingInfo.Add(new BuildingInfo {Building = b}); _context.GeneralInfo.Add(new GeneralInfo {Building = b}); _context.LocationInfo.Add(new LocationInfo {Building = b}); _context.SaveChanges(); } public static MyBuilding Find(int id) { using (var context = new Entities()) // Is this OK to do in a static method? { var b = context.Building.FirstOrDefault(p => p.BuildingId == id && p.UserId == UserId); if (b == null) throw new Exception("Error: Building not found or user does not have access."); return new MyBuilding {Id = b.BuildingId, Name = b.BuildingInfo.BuildingName, Notes = b.Notes}; } } } My primary concern: Is the way I am instantiating my DbContext as a private property thread-safe, and is it safe to have a static method that instantiates a separate DbContext? Or am I approaching this all wrong? I am not opposed to learning up on the repository pattern if I am taking the total wrong approach here.

  Read the article

• Forced to be trained [closed]

  - by steeb

  is it OK to force employees to take a training in order to make them sign a contract to stay in the job for X years? Here I'm the only developer in the company and before this job I've developed in VB6, VB.Net and others. There are others technicians here but they query the database server to make reports and make little programs but do not spend all day in programming. I was hired here to manage some legacy data to be migrated to a new system and I used my experience to accomplish the task. I also have made some utilities and other developments. Since we went live with the new system I've been developing a lot of side programs, add-ons and changed the source code of it and basically I've been learning from it since then and became some sort of jack of all trades when some feature needs to be changed or corrected. I have one and a half year in this company but during the last 8 months I've been entirely programming in the system. There have been times when even the implementers ask me how I accomplish certain things. The issue here is that the company has come and told me and other co-workers (which do not program in the system but know basic programming and databases) to have a basic training to program for the new system's platform and when we finish it we will sign a contract to stay in the company for an unspecified time. They have offered also an unspecified better salary. I'm feeling very suspicious cause I know the basics of system and I don't understand why I have to take it, being known by everybody all developments I've made. I gathered with my boss and told him that I should not take that course because I feel that I can learn more with all the daily requirements I've been asked and they should save that money. But he responded me that I have to take it and sign after that. I think they want me to be with them for a long time, and I'd like to, but my opinion is that I would like to stay in the company because I feel comfortable in all laboral aspects (including salary) but not because I signed a contract forced to do more tasks and forced to say no if I have others and better job offers. What advice can you give me in this kind of situation?

  Read the article

• Should i continue my self-taught coding practice or learn how to do coding professionally?

  - by G1i1ch

  Lately I've been getting professional work, hanging out with other programmers, and making friends in the industry. The only thing is I'm 100% self-taught. It's caused my style to extremely deviate from the style of those that are properly trained. It's the techniques and organization of my code that's different. It's a mixture of several things I do. I tend to blend several programming paradigms together. Like Functional and OO. I lean to the Functional side more than OO, but I see the use of OO when something would make more sense as an abstract entity. Like a game object. Next I also go the simple route when doing something. When in contrast, it seems like sometimes the code I see from professional programmers is complicated for the sake of it! I use lots of closures. And lastly, I'm not the best commenter. I find it easier just to read through my code than reading the comment. And most cases I just end up reading the code even if there are comments. Plus I've been told that, because of how simply I write my code, it's very easy to read it. I hear professionally trained programmers go on and on about things like unit tests. Something I've never used before so I haven't even the faintest idea of what they are or how they work. Lots and lots of underscores "_", which aren't really my taste. Most of the techniques I use are straight from me, or a few books I've read. Don't know anything about MVC, I've heard a lot about it though with things like backbone.js. I think it's a way to organize an application. It just confuses me though because by now I've made my own organizational structures. It's a bit of a pain. I can't use template applications at all when learning something new like with Ubuntu's Quickly. I have trouble understanding code that I can tell is from someone trained. Complete OO programming really leaves a bad taste in my mouth, yet that seems to be what EVERYONE else is strictly using. It's left me not that confident in the look of my code, or wondering whether I'll cause sparks when joining a company or maybe contributing to open source projects. In fact I'm rather scared of the fact that people will eventually be checking out my code. Is this just something normal any programmer goes through or should I really look to change up my techniques?

  Read the article

• The type of programmer I want to be [closed]

  - by Aventinus_

  I'm an undergraduate Software Engineer student, although I've decided that pure programming is what I want to do for the rest of my life. The thing is that programming is a vast field and although most of its aspects are extremely interesting, soon or later I'll have to choose one (?) to focus on. I have several ideas on small projects I'd like to develop this summer, having in mind that this will gain me some experience and, in the best scenario, some cash. But the most important reason I'd like to develop something close to “professional” is to give myself direction on what I want to do as a programmer. One path is that of the Web Programmer. I enjoy PHP and MySQL, as well as HTML and CSS, although I don't really like ASP.NET. I can see myself writing web apps, using the above technologies, as well as XML and Javascript. I also have a neat idea on a Facebook app. The other path is that of the Desktop Programmer. This is a little more complicated cause I really-really enjoy high level languages such as Java and Python but not the low level ones, such as C. I use both Linux and Windows for the last 6 years and I like their latest DEs (meaning Gnome Shell and Metro). I can see myself writing desktop applications for both OSs as long as it means high level programming. Ideally I'd like being able to help the development of GNOME. The last path that interests me is the path of the Smartphone Programmer. I have created some sample applications on Android and due to Java I found it a quite interesting experience. I can also see myself as an independent smartphone developer. These 3 paths seem equally interesting at the moment due to the shallowness of my experience, I guess. I know that I should spend time with all of them and then choose the right one for me but I'd like to know what are the pros and cons in terms of learning curve, fun, job finding and of course financial rewards with each of these paths. I have fair or basic understanding of the languages/technologies I described earlier and this question will help me choose where to focus, at least for now.

  Read the article

• Accessing controls of .aspx file in .aspx.cs without any declaration.!!??

  I am able to access the controls of ".aspx" file in ".aspx.cs" directly without any declaration in ".aspx.cs" or in designer.cs. How is this possible? This is happeing only if I open website as using File System. Create a new ASP.NET web site application with Visual Studio 2008. So following three files will be created automatically              "Default.aspx",              "Default.aspx.cs"              "Default.designer.cs" Now Delete "Default.designer.cs" perminently. Just create a button in Default.aspx file    <asp:Button runat="server" Text="Save Plan" ID="btnSave" />   Close the Solution and open the website as File System.               File -> Open Web Site -> File System -> Select Web Site Folder and Open the project.                   Now btnSave is automatically recognized in Default.aspx.cs without any declaration in Default.aspx.cs as bellow                            System.Web.UI.WebControls.Button btnSave; How btnSave is being recognized by .cs file without defining it anywhere as an object of System.Web.UI.WebControls.Button? Note: This happens only if you open Web Site from File System.           and No Declaration at all for btnSave. Please refer this article on this. span.fullpost {display:none;}

  Read the article

• Building a Store Locator ASP.NET Application Using Google Maps API

  The past couple of projects I've been working on have included the use of the Google Maps API and geocoding service in websites for various reasons. I decided to tie together some of the lessons learned, build an ASP.NETstore locator demo, and write about it on 4Guys. Last week I published the first article in what I think will be a three-part series: Building a Store Locator ASP.NET Application Using Google Maps (Part 1). Part 1 walks through creating a demo where a user can type in an address and any stores within a (roughly) 15 mile area will be displayed in a grid.The article begins with a look at the database used to power the store locator (namely, a single table that contains one row for every location, with each location storing its store number, address, and, most important, latitude and longitude coordinates) and then turns to usingGoogle's geocoding service to translatea user-entered address into latitude and longitude coordinates. The latitude and longitude coordinates are used to find nearby stores, which are then displayed in a grid. Part 2 looks at enhancing the search results to include a map with markers indicating the position of each nearby store location. The Google Maps API, along with a bit of client-side script and server-side logic, make this actually pretty straightforward and easy to implement. Here's a screen shot of the improved store locator results. Part 3, which I plan on publishing next week, looks at how to enhance the map by using information windows to display address information when clicking a marker. Additionally, I'll show how to use custom icons for the markers so that instead of having the same marker for each nearby location the markers will be images numbered 1, 2, 3, and so on, which will correspond to a number assigned to each search result in the grid. The idea here is that by numbering the search results in the grid and the markers on the map visitors will quickly be able to see what marker corresponds to what search result. This article and demo has been a lot of fun to write and create, and I hope you enjoy reading it, too. Building a Store Locator ASP.NET Application Using Google Maps API (Part 1) Building a Store Locator ASP.NET Application Using Google Maps API (Part 2) Happy Programming!Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• ADF Mobile Released!!

  - by Denis T

  ADFmfAnnounce We are pleased to announce the general availability of the newest version of Oracle’s ADF Mobile framework. This new framework provides the much anticipated on-device capabilities that the latest mobile applications require.  Feature Highlights Java - Oracle brings a Java VM embedded with each application so you can develop all your business logic in the platform neutral language you know and love! (Yes, even iOS!) JDBC - Since we give you Java, we also provide JDBC along with a SQLite driver and engine that also supports encryption out of the box. Multi-Platform - Truly develop your application only once and deploy to multiple platforms. iOS and Android platforms are supported for both phone and tablet. Flexible - You can decide how to implement the UI: (a) Use existing server-based UI framework like JSF. (b) Use your own favorite HTML5 framework like JQuery. (c) Use our declarative HTML5 component set provided with the framework. ADF Mobile XML or AMX for short, provides all the normal input and layout controls you expect and we also add charts/maps/gauges along with it to provide a very comprehensive UI controls. You can also mix and match any of the three for ultimate flexibility! Device Feature Access - You can get access to device features from either Java or JavaScript to invoke features like camera, GPS, email, SMS, contacts, etc. Secure - ADF Mobile provides integrated security that works with your server back-end as well. Whether you’re using remote URLs, local HTML or AMX, you can secure any/all of your features with a single consistent login page. Since we also give you SQLite encryption, we are assured that your data is safe. Rapid - Using the same development techniques that ADF developers are already used to, you can quickly create mobile applications without ever learning another language! Architecture ADF Mobile is a “hybrid” architecture that employs a natively built “container” on each platform that hosts a number of browser windows that are used to display the application content. We add the Java VM as a natively built library to the container for business logic.   How To Get Started ADF Mobile is an extension to the recently released JDeveloper version 11.1.2.3.0. Simple get the latest JDeveloper from Oracle Technology Network and use the Check for Updates feature to get the ADF Mobile extension. Note: ADF Mobile does not require developers to learn any other languages or frameworks but to build/deploy to iOS, you must be on an Apple MacintoshTM and have Xcode installed. To build/deploy to Android™ you must have the Android SDK installed.

  Read the article

• what would be a good way to implement/render a 2d tiled map for a browser game?

  - by jj_

  I've made this little rpg ruby game I did while learning and now I'd like to make it into a browser game. I've already set up Sinatra framework to serve it, so what I am looking for, before everything else, is a way to represent the game map in browser (location attributes are stored in db). A new map is randomly generated by code for each new game at each game start. For now forget db, and let's say a map (say 100x100 "squares") is stored as a tridimensional array. (x,y, ...) Last "dimension" of array stores who & what is at that map cell: a player, a building, whatever. So all I have to do is render those "squares" or array cells to a 2d tiled map in the browser. The map does not need to refresh or be dynamically fetched as you scroll it, (at least at this stage of development) but, a technology which would allow me to do so in future would be a good reason for choosing it. Things that I thought of: html tables, html5 canvas, some js framework which is designed exactly with this purpose (which I do not know of = please advice). Yes I know about gamequery-js framework, but I've never used it, and I don't know if it's going to slow down everything down to inusability as I'm adding new features (scrolling, ajax). I really don't know of any other alternatives.. maybe there are lighter approaches? Easier or more minimalistic ways ? More targeted js framework which is the right tool for the job? Maybe just some html canvas code, or even simple image maps, or images with absolute positioning will be enough? The thing is I'd like to start simple, and then gradually make it better, so, as I said before, I'd prefer something that will give me room for improvement or is headed toward new web tendencies but which will also give me a bit of gratification in the beginning :) So.. advices are needed! And appreciated! :) Thanks p.s. Flash is excluded because I don't like it.

  Read the article

• Is it dangerous for me to give some of my Model classes Control-like methods?

  - by Pureferret

  In my personal project I have tried to stick to MVC, but I've also been made aware that sticking to MVC too tightly can be a bad thing as it makes writing awkward and forces the flow of the program in odd ways (i.e. some simple functions can be performed by something that normally wouldn't, and avoid MVC related overheads). So I'm beginning to feel justified in this compromise: I have some 'manager programs' that 'own' data and have some way to manipulate it, as such I think they'd count as both part of the model, and part of the control, and to me this feels more natural than keepingthem separate. For instance: One of my Managers is the PlayerCharacterManager that has these methods: void buySkill(PlayerCharacter playerCharacter, Skill skill); void changeName(); void changeRole(); void restatCharacter(); void addCharacterToGame(); void createNewCharacter(); PlayerCharacter getPlayerCharacter(); List<PlayerCharacter> getPlayersCharacter(Player player); List<PlayerCharacter> getAllCharacters(); I hope the mothod names are transparent enough that they don't all need explaining. I've called it a manager because it will help manage all of the PlayerCharacter 'model' objects the code creates, and create and keep a map of these. I may also get it to store other information in the future. I plan to have another two similar classes for this sort of control, but I will orchestrate when and how this happens, and what to do with the returned data via a pure controller class. This splitting up control between informed managers and the controller, as opposed to operating just through a controller seems like it will simplify my code and make it flow more. My question is, is this a dangerous choice, in terms of making the code harder to follow/test/fix? Is this somethign established as good or bad or neutral? I oculdn't find anything similar except the idea of Actors but that's not quite why I'm trying to do. Edit: Perhaps an example is needed; I'm using the Controller to update the view and access the data, so when I click the 'Add new character to a player button' it'll call methods in the controller that then go and tell the PlayerCharacterManager class to create a new character instance, it'll call the PlayerManager class to add that new character to the player-character map, and then it'll add this information to the database, and tell the view to update any GUIs effected. That is the sort of 'control sequence' I'm hoping to create with these manager classes.

  Read the article

• Employer admits that its developers are underpaid and undervalued. Time to part ways?

  - by Psionic

  My employer recently posted an opening for a C# Developer with 3-5 years of experience. The requirements and expectations for the position were fair, up until the criteria for salary determination. It was stated clearly that compensation would depend ONLY on experience with C#, and that years of programming experience with other languages & frameworks would be considered irrelevant and not factored in. I brought up my concern with HR that good candidates would see this as a red flag and steer away. I attempted to explain that software development is about much more than specific languages, and that paying someone for their experience in a single language is a very shortsighted approach to hiring good developers (I'm telling this to the HR dept of a software company). The response: "We are tired of wasting time interviewing developers who expect 'big salaries' because they have lots of additional programming experience in languages other than what we require." The #1 issue here is that 'big salaries' = Market Rate. After some serious discussion, they essentially admitted that nobody at the company is paid near market rate for their skills, and there's nothing that can be done about it. The C-suite has the mentality that employees should only be paid for skills proven over years under their watch. Entry-level developers are picked up for less than $38K and may reach 50K after 3 years, which I'm assuming is around what they plan on offering candidates for the C# position. Another interesting discovery (not as relevant) - people 'promoted' to higher responsibilities do not get raises. The 'promotion' is considered an adjustment of the individuals' roles to better suit their 'strengths', which is what they're already being paid for. After hearing these hard truths straight from HR, I would assume that most people who are looking out for themselves would quickly begin searching for a new employer that has a better idea of what they're doing in the industry (this company fails in many other ways, but I don't want to write a book). Here is my dilemma however: This is the first official software development position I've held, for barely 1 year now. My previous position of 3 years was with a very small company where I performed many duties, among them software development (not in my official job description, but I tried very hard to make it so). I've identified local openings that I'm currently qualified for, most paying at least 50% more than I'm getting now. Question is, is it too soon for a jump? I am getting valuable experience in my current position, with no shortage of exciting projects. The work environment is very comfortable, and I'm told by many that I'm in the spotlight of the C-level guys for the stuff that I've been able to accomplish during my short time (for what that's worth). However, there is a clear opportunity cost to staying, knowing now with certainty that I will have to wait 3-5 years only to be capped at what I could potentially be earning elsewhere this year. I am also aware that 'job hopper' is a dangerous label to have, regardless of the reasons.

  Read the article

• SSMS Tools Pack 3.0 is out. Full SSMS 2014 support and improved features.

  - by Mladen Prajdic

  With version 3.0 the SSMS 2014 is fully supported. Since this is a new major version you'll eventually need a new license. Please check the EULA to see when. As a thank you for your patience with this release, everyone that bought the SSMS Tools Pack after April 1st, the release date of SQL Server 2014, will receive a free upgrade. You won't have to do anything for this to take effect. First thing you'll notice is that the UI has been completely changed. It's more in line with SSMS and looks less web-like. Also the core has been updated and rewritten in some places to be better suited for future features. Major improvements for this release are: Window Connection Coloring Something a lot of people have asked me over the last 2 years is if there's a way to color the tab of the window itself. I'm very glad to say that now it is. In SSMS 2012 and higher the actual query window tab is also colored at the top border with the same color as the already existing strip making it much easier to see to which server your query window is connected to even when a window is not focused. To make it even better, you can not also specify the desired color based on the database name and not just the server name. This makes is useful for production environments where you need to be careful in which database you run your queries in. Format SQL The format SQL core was rewritten so it'll be easier to improve it in future versions. New improvement is the ability to terminate SQL statements with semicolons. This is available only in SSMS 2012 and up. Execution Plan Analyzer A big request was to implement the Problems and Solutions tooltip as a window that you can copy the text from. This is now available. You can move the window around and copy text from it. It's a small improvement but better stuff will come. SQL History Current Window History has been improved with faster search and now also shows the color of the server/database it was ran against. This is very helpful if you change your connection in the same query window making it clear which server/database you ran query on. The option to Force Save the history has been added. This is a menu item that flushes the execution and tab content history save buffers to disk. SQL Snippets Added an option to generate snippet from selected SQL text on right click menu. Run script on multiple databases Configurable database groups that you can save and reuse were added. You can create groups of preselected databases to choose from for each server. This makes repetitive tasks much easier New small team licensing option A lot of requests came in for 1 computer, Unlimited VMs option so now it's here. Hope it serves you well.

  Read the article

< Previous Page | 318 319 320 321 322 323 324 325 326 327 328 329  | Next Page >