Search Results

Search found 10169 results on 407 pages for 'port'.

Page 322/407 | < Previous Page | 318 319 320 321 322 323 324 325 326 327 328 329  | Next Page >

• MySQL tmpdir on /dev/shm with SELinux

  - by smorfnip

  On RHEL5, I have a small MySQL database that has to write temp files. To speed up this process, I would like to move the temporary directory to /dev/shm by putting the following line into my.cnf: tmpdir=/dev/shm/mysqltmp I can create /dev/shm/mysqltmp just fine and do chown mysql:mysql /dev/shm/mysqltmp chcon --reference /tmp/ /dev/shm/mysqltmp I've tried to make SELinux happy by applying the same settings that are in effect for /tmp/ (and /var/tmp/), which is presumably where MySQL is writing its tmp files if tmpdir is undefined. The problem is that SELinux complains about MySQL having access to that directory. I get the following in /var/log/messages: SELinux is preventing mysqld (mysqld_t) "getattr" to /dev/shm (tmpfs_t). SELinux is a hard mistress. Details: Source Context root:system_r:mysqld_t Target Context system_u:object_r:tmpfs_t Target Objects /dev/shm [ dir ] Source mysqld Source Path /usr/libexec/mysqld Port <Unknown> Host db.example.com Source RPM Packages mysql-server-5.0.77-3.el5 Target RPM Packages Policy RPM selinux-policy-2.4.6-255.el5_4.1 Selinux Enabled True Policy Type targeted MLS Enabled True Enforcing Mode Enforcing Plugin Name catchall_file Host Name db.example.com Platform Linux db.example.com 2.6.18-164.2.1.el5 #1 SMP Mon Sep 21 04:37:42 EDT 2009 x86_64 x86_64 Alert Count 46 First Seen Wed Nov 4 14:23:48 2009 Last Seen Thu Nov 5 09:46:00 2009 Local ID e746d880-18f6-43c1-b522-a8c0508a1775 ls -lZ /dev/shm shows drwxrwxr-x mysql mysql system_u:object_r:tmp_t mysqltmp and permissions for /dev/shm itself are drwxrwxrwt root root system_u:object_r:tmpfs_t shm I've also tried chcon -R -t mysqld_t /dev/shm/mysqltmp and setting the group on /dev/shm to mysql with no better results. Shouldn't it be enough to tell SELinux, hey, this is a temp directory just like MySQL was using before? Short of turning off SELinux, how do I make this work? Do I need to edit SELinux policy files?

  Read the article

• Vista ICS issue

  - by Bill Grey

  I have a strange problem with Internet Connection Sharing on a laptop running Vista Business. This laptop is connected to the internet via the ethernet port, which goes to an ADSL modem. it is automatically assigned the IP address 192.168.1.50, and the modem/gateway is 192.168.1.1 My friends laptop is running Vista Home. Previously, I would create an ad hoc wireless network, enable ICS, and everything would be perfect. My friend would have internet access via this. However, something has now mysteriously broken. If I enable ICS on the wireless connection, it resets my Local Area Connection, assigning it the manual IP address of 192.168.0.1, which means my connection to the internet is destroyed. Both wireless adapters on each network are assigned auto configuration addresses, in the 168. range. They can see each other fine, but my friends laptop cannot access the internet via mine, even after I have restored the Local Area Connection settings. I understand the computer with ICS enabled must have the IP of 192.168.0.1, but previously, before whatever went wrong, my wireless adapter would be 192.168.0.1 and my friends computer would get an IP via DHCP. I have also tried setting static IP address and making a bridge, none of which works. How can I fix this problem, and prevent enabling ICS from touching my Local Area Connection? Both machines have no firewall, have appropriate settings etc...

  Read the article

• How do I install OpenStack on a single Ubuntu 12.04 node?

  - by Sam Edwards

  I'm having trouble installing OpenStack in Ubuntu 12.04, for various reasons: The official Ubuntu website recommends Juju and MAAS. However, this is a single node I am trying to get OpenStack installed on, and MAAS requires "two or more nodes" according to the docs. Additionally, I don't have any experience in MAAS and Juju and would rather stick to technologies I am more familiar with so that I can debug problems that arise. I have tried StackGeek but this fails because the node only has a single Ethernet port. The node does, however, have the second hard drive required for the nova storage. I have tried DevStack but cannot log into the dashboard. The login form appears fine, but as soon as I try to submit the page, my browser begins loading indefinitely. I have tried installing straight from packages, but I get an Internal Server Error in the dashboard upon trying to log in, with no helpful logs anywhere in sight to aid me in debugging the issue. Each of these attempts was with a fresh Ubuntu 12.04 LTS setup; I'm finding it really strange that no matter what I try, I cannot get OpenStack installed. Is this even a stable/mature project? Why am I encountering so many bugs?

  Read the article

• webserver horrible slow, sometimes incredible fast

  - by dhanke

  i am running a small community ( 6000+ Members ) on a non-virtual 64-bit ubuntu 11.04 system. I am not a Linux-pro, not even advanced, i just tried to setup a webserver, which does nothing special actually. Delivering some dynamic PHP and RoR websites is its task. So it might be that my configuration files do look horrible bad. Also, i might use the wrong vocabulary, so in doubt, please ask. Having a current all-time record of 520 registered users (board-accounts, no system-users) online at same time, average server-load is about 2.0 - 5.0. Meantime (~250 users) average server load value is at about 0.4 - 0.8, sometimes, on some expensive searches a bit higher. everything fine. From time to time however, the load increases up to 120 (120.0, not 12.0 ;) ). In this time, its hard to even connect via SSH, but when i reach the server, and use top/htop/iotop to see whats happening, i cannot identify any process causing high CPU load. iotop tells me about a current reading/writing speed of about approx. 70kb/s, which is quite equal to power-off i think. Memory-Usage is max. at ~ 12GB of 16GB, so swap remains empty. now the odd (at least for me:) waiting some minutes ( since i always get a bit into a panic when this happens, it feels like 5 minutes, but i suppose its more like 20-30 minutes) and the server is back to normal. everything continues as normal. another odd fact: when i run hdparm -tT /dev/sda, i get answer like: /dev/sda: Timing cached reads: 7180 MB in 2.00 seconds = 3591.13 MB/sec Timing buffered disk reads: 348 MB in 3.02 seconds = 115.41 MB/sec when i run the same command while the server is "frozen", the answer is like /dev/sda: <- takes about 5 minutes until this line appears Timing cached reads: 7180 MB in 2.00 seconds = 3591.13 MB/sec <- 5 more minutes Timing buffered disk reads: 348 MB in 3.02 seconds = 115.41 MB/sec <- another 5 minutes so the values are the same, but the quoted time is completely wrong. using time command as prefix also tells me that ~ 15 minutes were used. I searched in dmesg, /var/log/[messages|syslog] - nothing found. /var/log/errors however tells me that: Jul 4 20:28:30 localhost kernel: [19080.671415] INFO: task php5-fpm:27728 blocked for more than 120 seconds. Jul 4 20:28:30 localhost kernel: [19080.671419] "echo 0 /proc/sys/kernel/hung_task_timeout_secs" disables this message. multiple times. now that message does tell me that php5-fpm task was blocked or did block ? - but not if that is the cause or just one of the results of that "freeze". Anyone? to cut the long story short, i dont know where even to start analyzing. So if you can give me any advice by looking at following specs and configs, or ask me to provide more information, i`d be glad. Specs: 6 Core AMD Phenom(tm) II X6 1055T Processor * 16 Gigabyte Ram 2x 1.5 TB Seagate ST1500DL003-9VT16L via SATA 3 via SoftwareRaid (i suppose) Services: (due to service --status-all, those with [ + ]) nginx Webserver 1.0.14 mySQL 5.1.63 Server Ruby on Rails 2.3.11 ( passenger-nginx-module ) php5-fpm 5.3.6-13ubuntu3.7 SSH ido2db Further services: default crontab + nightly backup. syslog-ng Website consists of 2 subdomains, forum. and www. where forum is a phpBB3.x PHP-Board, and www a Ruby on Rails 2.3.11 application (portal). Mini-Note: sometimes i notice that the forum is pretty slow, in contrast to the always-fast (except for this "freeze") portal. Both share the same Database, but the portal is using it read-only. The Webserver is nginx, using phusion passenger module to communicate with the ruby-application. Also, for the forum it communicates with php5-fpm via socket: relevant nginx configuration parts ( with comments/questions starting by ; ) ; in case of freeze due to too high Filesystem activity, maybe adding a limit? #worker_rlimit_nofile 50000; user www-data; ; 6 cores, so i read 6 fits. maybe already wrong? worker_processes 6; pid /var/run/nginx.pid; events { worker_connections 1024; } http { passenger_root /var/lib/gems/1.8/gems/passenger-3.0.11; passenger_ruby /usr/bin/ruby1.8; ; the forum once featured a chat, which was working w/o websockets. ; so it was a hell of pull requests (deactivated now, freeze still happening) keepalive_timeout 65; keepalive_requests 50; gzip on; server { listen 80; server_name www.domain.tld; root /var/www/domain/rails/public; passenger_enabled on; } server { listen 80; server_name forum.domain.tld; location / { root /var/www/domain/forum; index index.php; } ; satic stuff to be handled by nginx location ~* ^/style/.+.(jpg|jpeg|gif|css|png|js|ico|xml)$ { access_log off; expires 30d; root /var/www/domain/forum/; } ; now the php magic, note the "backend"-fcgi_pass location ~ .php$ { fastcgi_split_path_info ^(.+\.php)(.*)$; fastcgi_pass backend; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /var/www/domain/forum$fastcgi_script_name; include fastcgi_params; fastcgi_param QUERY_STRING $query_string; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_intercept_errors on; fastcgi_ignore_client_abort off; fastcgi_connect_timeout 60; fastcgi_send_timeout 180; fastcgi_read_timeout 180; fastcgi_buffer_size 128k; fastcgi_buffers 256 16k; fastcgi_busy_buffers_size 256k; fastcgi_temp_file_write_size 256k; fastcgi_max_temp_file_size 0; } location ~ /\.ht { deny all; } } ;the php5-fpm socket. i read that /dev/shm/ whould be the fastes place for this. bad idea in general? upstream backend { server unix:/dev/shm/phpfpm; } ... } php5-fpm settings (i changed this values due to php5-fpm error log messages higher and higher.. (freeze-problem was there before as well)* listen = /dev/shm/phpfpm user = www-data group = www-data pm = dynamic ; holy, 4000! well, shinking this value to earth-level gave me ; 100s of 502 bad gateway commands. this values were quite stable. ; since there are only max 520 users online i dont get it, why i would need ; as many children as configured here. due to keep-alive maybe? ; asking questions is easier for me since restarting server will make ; my community-members angry ;) pm.max_children = 4000 pm.start_servers = 100 pm.min_spare_servers = 50 pm.max_spare_servers = 150 pm.max_requests = 10 pm.status_path = /status ping.path = /ping ping.response = pong slowlog = log/$pool.log.slow ;should i use rlimit? ;rlimit_files = 1024 chdir = / mysql/my.cnf [client] port = 3306 socket = /var/run/mysqld/mysqld.sock [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] user = mysql socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp skip-external-locking bind-address = 127.0.0.1 key_buffer = 16M max_allowed_packet = 16M thread_stack = 192K thread_cache_size = 8 myisam-recover = BACKUP ; high number, but less gives some phpBB errors. max_connections = 450 table_cache = 512 ; i read twice the cpu cores, bad? thread_concurrency = 12 join_buffer_size = 2084K concurrent_insert = 3 query_cache_limit = 64M query_cache_size = 512M query_cache_type = 1 log_error = /var/log/mysql/error.log log_slow_queries = /var/log/mysql/mysql-slow.log long_query_time = 2 expire_logs_days = 10 max_binlog_size = 100M low_priority_updates=1 [mysqldump] quick quote-names max_allowed_packet = 16M [isamchk] key_buffer = 16M !includedir /etc/mysql/conf.d/ I used smartctl already, hdds seem to be fine. /proc/mdstatus quotes: Personalities : [raid1] [linear] [multipath] [raid0] [raid6] [raid5] [raid4] [raid10] md3 : active raid1 sda3[1] 1459264192 blocks [2/1] [_U] md1 : active raid1 sda1[0] 3911680 blocks [2/1] [U_] unused devices: ulimit -a core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited scheduling priority (-e) 0 file size (blocks, -f) unlimited pending signals (-i) 127727 max locked memory (kbytes, -l) 64 max memory size (kbytes, -m) unlimited open files (-n) 1024 pipe size (512 bytes, -p) 8 POSIX message queues (bytes, -q) 819200 real-time priority (-r) 0 stack size (kbytes, -s) 8192 cpu time (seconds, -t) unlimited max user processes (-u) 127727 virtual memory (kbytes, -v) unlimited file locks (-x) unlimited I quote some questions in my configuration files, these are not (intentional) directly problem-related, but would be nice for me to know wether they are indeed questionable or done right. One additional Fact: my MYSQL-database is at 12GB size. i dont know if that does matter, but mytop sometimes shows me 4-5 seconds long insert queries, some are 20-30 seconds long. Its just a feeling that i am unable to prove (because i dont know how), but when i disable the database, the freeze seems not to happen. Example: i created a dummy rails application to see the development log. the app made some sql-queries, reads and inserts. the log quite often was like: DbTest Load (0.3ms) SELECT * FROM `db_test` WHERE (`db_test`.`id` = 31722) LIMIT 1 SQL (0.1ms) BEGIN DbTest Update (0.3ms) UPDATE `db_test` SET `updated_at` = '2012-07-04 23:32:34' WHERE `id` = 31722 - now the log stands still for 5-60 seconds. SQL (49.1ms) COMMIT - SQL-Update time in the log does not include freeze time Rendering test/index Completed in 96ms (View: 16, DB: 59) | 200 OK [http://localhost:9000/test] Bad part is: this mini-freeze here only happens from time to time as well. note: meanwhile i cannot even upload files via scp. I currently feel like running form bad to worse and back by googling for my server-problem due to immense lack of knowledge regarding server configurations. It still makes me wonder, why those problems even appear, since 250 users a time is not such a high amount, right? So my questions: whats wrong and how to fix? ;) or: what information can i provide to make the situation more clear? can you point at some critical bad configuration-line which i should consider to catch up in the documentation? are there any tools i can run to see some possible bottlenecks? any further advice? (next to: "pay someone who knows what he does" - its a private project, server costs enough already. :)) Thanks for your time and help. Best Regards, Daniel P.S.: i renamed the configfiles to domain.tld since i dont want to have any % more load to the server until its fixed. might be a exaggeratedly thought.. P.P.S: if i asked a complete duplicate question, sorry. my search results seemed to be quite specific in their own way.

  Read the article

• Looking for cheap Wireless router, with USB for attached USB disk drive

  - by geoffc

  I have a 802.11b router at home (DLink DI-614+ (B rev)) and it is working perfectly well for me. I want to replace it though, since it is out of updates, and now several years old and heck, I want a new toy to configure! I was trying to decide what to get. I could care less about 802.11g or n support, since B is fast enough, but every device in my house is now B/G, so G would be fine for me. N buys me little to nothing. (Small enough house that range is a non-issue). The features I realized I want are a USB port for sharing a USB hard drive. I would like to have a central device I could store files on. I do not want to waste the power of an always running PC to do this, so a router seems like the place to go. I would love it, if it could support Vonage VOIP as well, then I could ditch a power brick from a second device (I have the small DLink Vonage VOIP box). All the current examples of this router (with USB drive, yet to find one with VOIP too!) are in the $100+ range, and N and silly, when a B/G is in the $30 range around here.

  Read the article

• Best Firewall product for hosting/housing environment?

  - by Raffael Luthiger

  I am searching for a firewall product (appliance or software) for an hosting/housing environment. The biggest problem is that the rules get very complex as more customers are behind the firewall. Some have only one server, others have a whole subnet. Some need NAT, some a VPN endpoint. Some customers want to only allow port http, others ssh as well. So the device needs to be able to support VLANs and it should be possible to group the rules per customer. Speed is another important point. And being able to manage redundant devices easily. I am searching for something that doesn't have all the extras like spam filter etc. I was searching a lot on the net but either they had all those extras as well (and with is an overloaded configuration interface) or they missed some of the features I need (e.g. VLAN). The VPN endpoint is not the an important criteria. We were thinking about a separate machine for it.

  Read the article

• Router slowing my connection?

  - by Roberto

  I have a Linksys WRT54G and I pay for a 12Mbps connection. I've been testing my connection using speedtest.net for many days and always get 8Mbps. I called the support and they told me to bypass the router and test. I did it and got 16Mbps (much more than I pay for), so I thought "this guy just changed my speed so can he blame my router", and he blamed it. But to my surprise, everytime I bypass the router I get 16Mbps and when I use the router I get 8Mbps. Is this guy trolling me somehow (configuring the VOIP-modem-stuff to different profiles depending o the MAC address connecting to it) or is my router a POS? How can I find out? I don't know what's the thing the router connects to, it's a kind of VOIP adapter; the link is this one, but unfortunately I don't think you'll understand because it's in Portuguese. I know they can remotely connect to it, that's the origin of my conspiracy theory :) I just tested wired to the router and got 10Mbps (and still 8Mbps on wifi and 16Mbps without router) O_o I'm 5cm away from my router, so no obstacles to interfere, right? ------ UPDATE ------- It's a WRT54G V8, I'm using firmware v8.00.7 (will install 8.00.8 tomorrow, but I saw that it's only a minor fix to UPnP denial of service security vulnerability). Results: IPerf LAN-LAN: 80Mbps IPerf LAN-WLAN: 19Mbps (therefore we can ignore wireless issues/settings) I wasn't able to make the (W)LAN-WAN NAT-enabled test with IPerf, I get a connection refused error. I'm not sure if did it right: ran in server mode, configured router to forward that port to my IP and tried to connect to my internet IP that got from this site. I don't think there is a way to disable NAT using this firmware. Question: Let's suppose it's an underpowered hardware issue. Is it right to assume that custom firmwares could resolve the issue because they are possibly better implemented and would make better use of the router resources? I couldn't find any references pointing to wired performance improvements with the use of custom firmware.

  Read the article

• IP Tables won't save the rule.

  - by ArchUser

  Hello, I'm using ArchLinux and I have an IP tables rule that I know works (from my other server), and it's in /etc/iptables/iptables.rules, it's the only rule set in that directory. I run, /etc/rc.d/iptables save, then /etc/rc.d/iptables/restart, but when I do "iptables --list", I get ACCEPTs on INPUT,FORWARD & OUTPUT. # Generated by iptables-save v1.4.8 on Sat Jan 8 18:42:50 2011 *filter :INPUT DROP [0:0] :FORWARD DROP [0:0] :OUTPUT ACCEPT [216:14865] :BRUTEGUARD - [0:0] :interfaces - [0:0] :open - [0:0] -A INPUT -p icmp -m icmp --icmp-type 18 -j DROP -A INPUT -p icmp -m icmp --icmp-type 17 -j DROP -A INPUT -p icmp -m icmp --icmp-type 10 -j DROP -A INPUT -p icmp -m icmp --icmp-type 9 -j DROP -A INPUT -p icmp -m icmp --icmp-type 5 -j DROP -A INPUT -p icmp -j ACCEPT -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -j interfaces -A INPUT -j open -A INPUT -p tcp -j REJECT --reject-with tcp-reset -A INPUT -p udp -j REJECT --reject-with icmp-port-unreachable -A INPUT -p tcp -m tcp ! --tcp-flags FIN,SYN,RST,ACK SYN -m state --state NEW -j DROP -A INPUT -f -j DROP -A INPUT -p tcp -m tcp --tcp-flags FIN,SYN,RST,PSH,ACK,URG FIN,SYN,RST,PSH,ACK,URG -j DROP -A INPUT -p tcp -m tcp --tcp-flags FIN,SYN,RST,PSH,ACK,URG NONE -j DROP -A INPUT -i eth+ -p icmp -m icmp --icmp-type 8 -j DROP -A BRUTEGUARD -m recent --set --name BF --rsource -A BRUTEGUARD -m recent --update --seconds 600 --hitcount 20 --name BF --rsource -j LOG --log-prefix "[BRUTEFORCE ATTEMPT] " --log-level 6 -A BRUTEGUARD -m recent --update --seconds 600 --hitcount 20 --name BF --rsource -j DROP -A interfaces -i lo -j ACCEPT -A open -p tcp -m tcp --dport 80 -j ACCEPT -A open -p tcp -m tcp --dport 10011 -j ACCEPT -A open -p udp -m udp --dport 9987 -j ACCEPT -A open -p tcp -m tcp --dport 30033 -j ACCEPT -A open -p tcp -m tcp --dport 8000 -j ACCEPT -A open -p tcp -m tcp --dport 8001 -j ACCEPT -A open -s 76.119.125.61 -p tcp -m tcp --dport 21 -j ACCEPT -A open -s 76.119.125.61 -p tcp -m tcp --dport 3306 -j ACCEPT -A open -p tcp -m tcp --dport 22 -j BRUTEGUARD -A open -s 76.119.125.61 -p tcp -m tcp --dport 22 -m state --state NEW,RELATED,ESTABLISHED -j ACCEPT COMMIT # Completed on Sat Jan 8 18:42:50 2011

  Read the article

• ISA Server 2006 SSL Certificate Dilemma

  - by JohnyD

  I'm making so great headway in offering our services over https with help from a Go Daddy certificate, later to be upgraded to Thawte SSL123 certs. But, I've just run into one whopper of a problem. Here's my setup: I run an ISA 2006 firewall. Our web services are distributed over 2 servers. One is Windows 2000 (www.domain.com) and the other is Windows 2003 (services.domain.com). So, I'll need to purchase 2 certs for both www and services, import them into IIS6 on their respective machines, then export them with the primary key (making sure to Include all certificates in the certification path if possible... that had me stumped for a while), and then to finally import them into ISA's local computer Personal store. The problem I've just run into is that I have separate firewall rules for services.domain.com and www.domain.com... because requests need to be forwarded to different web servers. Each of these firewall rules use the same httplistener. I have just found out that you can only use 1 certificate per httplistener. To make matters worse you can only have a single httplistener per ip / port. Is this correct? I can only use a single certificate for a single ip address? This would seem to be a severe limitation. Am I wrong? If I'm not then I've got a whole lot more work ahead of me as I'll have to set up extra ip's, add them to the firewall's network interface, create new listeners using that ip, etc... Can someone please confirm that I'm doing this correctly / incorrectly? Once I got my head wrapped around it all it seemed easy... then this. Thanks in advance.

  Read the article

• How do multiple displays work on a AMD 785G / ATI HD 4200 motherboard?

  - by aireq

  I just ordered a ASUS M4A785TD-V EVO which has the AMD 785G chipset and HD4200 integrated graphic. The board has VGA, DVI, and HDMI outputs. I'm wondering how many outputs I can run at once, and from what connectors? My guess is that I can only use the VGA, and either the DVI or the HDMI in a dual setup. But not the HDMI and the DVI at the same time. Is this correct? If I have devices plugged into both the HDMI and the DVI ports is there a way to choose between which port I want to use? I have a dual 19" monitor setup, as well as a LCD TV. I'd like to run the VGA and the DVI into my two monitors, and then the HDMI to my TV. Then when I want to watch something on the TV I'd like to be able to switch over from the DVI to the HDMI. Is this possible with out crawling under my desk and unplugging/plugging things in? Update I found the following in the manual off ASUS's website, which confirms my original suspicion that HDMI and DVI can't be used at the same time. But I'd still like to know if it's possible through software to switch between using the HDMI and DVI.

  Read the article

• Experience with AMCC 3ware 9650se raid cards? Ours seems dead

  - by antiduh

  We have a 8-port 3ware 9650se raid card for our main disk array. We had to bring the server down for a pending power outage, and when we turned the machine back on, the raid card never started. This card has been in service for a couple years without problems, and was working up until the shutdown. Now, when we turn the machine on, the bios option rom that normally kicks in before the bootloader doesn't show up, none of the drives start, and when the OS tries to access the device, it just times out. The firmware on it has been upgraded in the past, so it's possible we've hit some sort of firmware bug. We're using it in a Silicon Mechanics R272 machine with gentoo for the OS. The OS eventually boots, but alas, without the card. We've ordered a new one, but I'm worried that if we replace the card it won't recognize the existing array. Has anybody performed a card swap before? Any help would be greatly appreciated. Edit: These are the kernel errors we see: 3ware 9000 Storage Controller device driver for Linux v2.26.02.012. 3w-9xxx 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 3w-9xxx 0000:09:00.0: setting latency timer to 64 3w-9xxx: scsi0: ERROR: (0x06:0x000D): PCI Abort: clearing. 3w-9xxx: scsi0: ERROR: (0x06:0x001F): Microcontroller not ready during reset sequence. 3w-9xxx: scsi0: ERROR: (0x06:0x0036): Response queue (large) empty failed during reset sequence. 3w-9xxx 0000:09:00.0: PCI INT A disabled

  Read the article

• Cachefilesd (cachefiles) everything seems to be set up, still not working

  - by Evgenius

  I'm trying to set up cachefilesd to work with my network folder shared using NFS. I have seemingly everything set up, however cachefilesd starts normally, however caching isn't functioning. Here is output of commands, which I ran in the same order 1 sudo mount ... cache-1:/mnt/datashared on /mnt/nfsshare type nfs (rw,sync,ac,acregmin=3,acregmax=60,acdirmin=30,acdirmax=300,lookupcache=pos,vers=3,fsc) ... 2 lsbmod | grep cachefiles cachefiles 40555 1 fscache 57430 4 nfs,cifs,cachefiles,nfsv4 3 [edited - deleted] 4 uname -r 3.8.0-34-generic 5 grep CONFIG_NFS_FSCACHE /boot/config-3.8.0-34-generic CONFIG_NFS_FSCACHE=y 6 lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 13.04 Release: 13.04 Codename: raring 7 sudo service cachefilesd restart * Restarting FilesCache daemon cachefilesd [ OK ] 8 dmesg [6211206.141781] FS-Cache: Withdrawing cache "mycache" [6211210.135236] FS-Cache: Cache "mycache" added (type cachefiles) [6211210.135242] CacheFiles: File cache on sdb1 registered [6214644.348929] CacheFiles: File cache on sdb1 unregistering [6214644.348935] FS-Cache: Withdrawing cache "mycache" [6214654.575909] FS-Cache: Cache "mycache" added (type cachefiles) [6214654.575915] CacheFiles: File cache on sdb1 registered 9 ps aux | grep cachefilesd root 65399 0.0 0.0 4460 540 ? Ss 23:14 0:00 /sbin/cachefilesd 1000 65464 0.0 0.0 8160 916 pts/0 S+ 23:16 0:00 grep --color=auto cachefilesd finally, biggest problem is 10 cat /proc/fs/nfsfs/volumes NV SERVER PORT DEV FSID FSC v3 64476645 801 0:24 233e020f0da07a93 no tl;dr I think I configured everything properly but FSC mount option + fscachefilesd don't seem to work

  Read the article

• Azure can't ping or telnet VM from client

  - by Raif

  I have a VM on Azure with an instance sqlserver 2012 running on it. From my work computer and my home computer I can't get sqlserver management studio connect to it. I have looked at ALL the settings recommended in numerous articles. everything is setup correctly. endpoint 1433 Private and public sqlserver tcp enabled. sqlserver tcp listening on right port sqlserver using mixed auth windows fire wall, holes poked and then disabled on both client and VM can log in from VM using the credentials that I'm trying to use remotely further more I can't ping the dns or ip or tellnet address from my local machines. I can however hit the iis from a browser using the ip. strange. CS asked me to download MS Network Monitor, which I did and pinged and telneted. I have the results saved but can't really make heads or tails of them. CS hasn't responded yet. I can post some info here that would help. EDIT Never one to shrink from a challenge, I deleted my VM and re-did everything. Now it works although my confidence azure is somewhat shaken.

  Read the article

• Word documents very slow to open over network, but fine when opened locally - on one machine

  - by Craig H

  Windows XP, Word 2003, patched. The issue is happening with several Word documents stored on a network drive. The Word documents are clearly a bit wonky (i.e. one is 675k, but if you copy everything but the last paragraph marker into a new document, the new document is only 30k). But that's only part of the problem. On one weird machine, and one machine only, it takes ~20 seconds to open these Word documents from the network drive. Copy the file to C: on that werid machine? Opens immediately. Go to other machines (that are very similar - same patch level, etc.) and open the same document from the network? Opens immediately. Delete normal.dot? 20 seconds. Login with a different user on the weird machine? 20 seconds. Plug wonky machine into a different network port? 20 seconds. So the problem appears to be hardware related (i.e. wonky internal NIC) or related to a setting that is not profile specific. Any ideas? "Scrubbing" all the documents isn't ideal for several reasons. This is driving me nuts because I swear I ran into this before many years ago and eventually figured it out. But I appear to have lost my notes.

  Read the article

• Short POST data in HTTP

  - by Matt

  We're hosting a customer's Debian Linux web server. It's running a PHP based web application. The server is sitting behind our firewall with it's own virtual interface and port 80 is forwarded internally to a machine sitting in the DMZ. The issue we're having is that when data is posted to the server it seems to be being cut short for some users. It's reproducable for some users on the same box. But the same user sending the same data on the same lan on another PC it works. The data gets cut to around 1140 bytes I'm told. Any idea why this might be happening? The customer is blaming our firewall, but then surely we'd have issues with other services. I'm suspecting it's a problem with the website itself. Suggestions on how to isolate the problem would be of help. Our firewall is Astaro. EDIT: A customer has set the ethernet frame size temporarily to 500bytes on the server. This made it work for now! I know some of the customers are using an internet provider that runs PPPoE

  Read the article

• How to avoid intrusion detection/anti spoofing issue on a sonicwall TZ series FW

  - by Ian

  We have a sonicwall tz series FW with two internet service providers connected. One of the providers has a wireless service which works a bit like an ethernet switch in that we have an ip with a /24 subnet and the gateway is .1. All other clients on the same subnet (say 195.222.99.0) have the same .1 gateway - this is important, read on. Some of our clients are also on the same subnet. Our config: X0 : Lan X1 : 89.90.91.92 X2 : 195.222.99.252/24 (GW 195.222.99.1) X1 and X2 are not connected, other than both being connected to the public Internet. Client config: X1 : 195.222.99.123/24 (GW 195.222.99.1) What fails, what works: Traffic 195.222.99.123 (client) <- 89.90.91.92 (X1) : Spoof alert Traffic 195.222.99.123 (client) <- 195.222.99.252 (X1) : OK - no spoof alert I have several clients with IPs in the 195.222.99.0 range and all provoke identical alerts. This is the alert I see on the FW: Alert Intrusion Prevention IP spoof dropped 195.222.99.252, 21475, X1 89.90.91.92, 80, X1 MAC address: 00:12:ef:41:75:88 Anti-spoofing is switched off on my FW (network-mac-ip-anti-spoofing - config for each interface) for all ports I can provoke the alerts by telneting to a port on X1 from the clients. You can't argue with the logic - this is suspicious traffic. X1 is receiving traffic with a source IP which corresponds to X2s subnet. Anyone know how can I tell the FW that packets with a src subnet of 195.222.99.0 can legitimately appear on X1? I know whats going wrong, I've seen the same thing before, but with higher end FWs you can avoid this with a few extra rules. I can't see how to do this here. And before you ask why we're using this service provider - they give us 3ms (yep 3ms, thats not an error) delay between routers.

  Read the article

• Traffic Shaping using tc

  - by Simon

  Hi guys, I have a 1.5 Mbit/s link that i want to share with 150 users. My setup is the following: Linux box with 3 NICs eth0 - public ip eth1 - subnet A - 50 users (static ips) eth2 - subnet B - 100 users (via dhcp) I am using squid as a transparent proxy on port 3128. dhcp server using ports 67 and 68. I was creating, but I think packets are not going to the right queues #!/bin/bash DEV=eth0 RATE_MAIN=2048kbit CEIL_MAIN=2048kbit BURST=1b CBURST=1b RATE_DEFAULT=1024kbit CEIL_DEFAULT=$CEIL_MAIN PRIO_DEFAULT=3 RATE_P2P=1024Kbit CEIL_P2P=$CEIL_MAIN PRIO_P2P=4 RATE_IND=32kbit CEIL_IND=$CEIL_DEFAULT tc qdisc del dev $DEV root tc qdisc add dev $DEV root handle 1: htb default 30 tc class add dev $DEV parent 1: classid 1:1 htb rate $RATE_MAIN ceil $CEIL_MAIN tc class add dev $DEV parent 1:1 classid 1:10 htb rate $RATE_DEFAULT ceil $CEIL_MAIN burst $BURST cburst $CBURST prio $PRIO_WEB ## some other sub class for p2p other traffic tc class add dev $DEV parent 1:1 classid 1:20 htb rate $RATE_P2P ceil $CEIL_P2P burst $BURST cburst $CBURST prio $PRIO_P2P $IPS_NET1=50 $IPS_NET2=100 let $IPS=$IPS_NET1+$IPS_NET2 for ((i=1; i<= $IPS; i++)) do let CLASSID=($i+100) let HANDLE=($i+100) tc class add dev $DEV parent 1:10 classid 1:$CLASSID htb rate $RATE_IND ceil $CEIL_IND tc qdisc add dev $DEV parent 1:$CLASSID handle $HANDLE: sfq perturb 10 done ## Generate IP addresses ## IP_ADDRESSES="" # Subnet A BASE_IP=10.10.10. for ((i=2; i<=$IPS_NET1+1; i++)) do TEMP="$BASE_IP$i" IP=ADDRESSES="$IP_ADDRESSES $TEMP" done # Subnet B BASE_IP=192.168.0. for ((i=2; i<=$IPS_NET2+1; i++)) do TEMP="$BASE_IP$i" IP_ADDRESSES="$IP_ADDRESSES $TEMP" done ## FILTERS ## j=1 U32="tc filter add dev $DEV protocol ip parent 1:0 prio $PRIO_DEFAULT u32" for NET in $IP_ADDRESSES; do let CLASSID=($j+100) $U32_DEFAULT match ip src $NET/32 flowid 1:$CLASSID $U32_DEFAULT match ip dst $NET/32 flowid 1:$CLASSID let j=j+1 done Can you guys help me figure out what's wrong with it? basically I want my classes to be 1:1 (1.5 Mbit ) 1:10 (1024 Kbit) 1:20 (1024 Kbit) (200 ips each with 32 kbit)

  Read the article

• When I log on to my company desktop, I log on to a domain. How is this domain name installed?

  - by learnerforever

  Hi, When I have to work on my machine in company, I have noticed that I log on to a domain (named on the basis of company name) and not really on that computer. From, what I understand, this has a few advantages, the primary being that I just need one password for the domain and can work through any of the machines in company. My questions are : What software on desktop/network have to be installed so that the desktop recognizes and gives me option of logging into a domain. I would guess that a software can be installed on desktop, and there we can configure the IP address of domain server of company and port number, which handles authentication. Is this correct? This takes me to another question that how are softwares installed on end machines in a company. Going to each machine physically and installing looks very unweildy from administrator point of view. An obvious solution would be to install softwares (and updates) over network. My question on this are: What protocols,keywords come into picture when administrator installs OS,softwares,updates from his administrator machine to end machine through network. Thanks,

  Read the article

• 2 Server FC SAN Configuration

  - by BSte

  I have 2 identical servers: -48GB Ram -8GigE NIC's -2FC NIC's -2x72GB RAID1 Hard Drives -Server 2008R2 Host I also Have a Fibre Channel SAN: -16x146GB RAID10 Hard Drives -2xDual-port FC Controllers (Controller A and B both have ports 1 and 2) -Server 1 has Fiber to Ports A1 and B1 -Server 2 has Fiber to Ports A2 and B2 -I kept the default config with 1 Virtual Disk and 1 Volume -The default mappings show ports A1,A2,B1,B2 on LUN 0 with read-write My goal is: -2xVM's with IIS and Guest Level Failover -2xVM's with SQL 2008 Enterprise using a Single DB and Guest Level Failover -1xVM that is an application server, preferable with Host Failover. From what I read, this will also need AD for clustering to work. -I need at least 1 VM always running for IIS and the SQLDB. This includes hardware failover and application (ie: reboot a VM for Critical updates) I was told I could install the VM's and run them from the SAN, and this is what I've tried: Installed MPIO and HyperV on Server1 and Server 2 Added the SAN as Disk E: on both servers, made it GPT and formatted NTFS Configured HyperV on both server to store use E:\VD and E:\VHD On server1, I was able to install 3 VM's on the SAN and all worked well. On server2, I would start installing the other 2 VM's, but always at some point the VM's would get a corrupt .VHD message (either server). Everything I found about the message typically related to antivirus, so I removed all antivirus on both Host servers (now only running 2008R2). I reformatted drive E: (SAN), recreated the VHD and VD directories, installed 3 VM's on Server 1, and then had the same issue when installing VM's on Server2. Obviously something is wrong, but I'm not certain what exactly. My questions: 1) Are my goals possible with this hardware setup? -I've read 2008R2 supports FC SAN's, but a lot of articles seem to only give examples with iSCSCI setups 2) What would be the suggested route on setting up the SAN (disks,volumes,LUN's)? I've worked with HyperV on a single machine before and never had issues. Actual experience working on SAN's and clustering is new to me. Any suggestions or recommendations to get me in the right direction would be much appreciated.

  Read the article

• Ubuntu 10.04: Unable to Start RabbitMQ Server Post-Installation

  - by Garland W. Binns

  After installing RabbitMQ on Ubuntu 10.04 I receive a failure message that the service was unable to start. Any insight into the issue would be greatly appreciated! Below are contents of startup_log and startup_err. Startup_log: {error_logger,{{2012,7,7},{15,50,31}},"Protocol: ~p: register error: ~p~n",["inet_tcp",{{badmatch,{error,etimedout}},[{inet_tcp_dist,listen,1},{net_kernel,start_protos,4},{net_kernel,start_protos,3},{net_kernel,init_node,2},{net_kernel,init,1},{gen_server,init_it,6},{proc_lib,init_p_do_apply,3}]}]} {error_logger,{{2012,7,7},{15,50,31}},crash_report,[[{initial_call,{net_kernel,init,['Argument__1']}},{pid,<0.20.0>},{registered_name,[]},{error_info,{exit,{error,badarg},[{gen_server,init_it,6},{proc_lib,init_p_do_apply,3}]}},{ancestors,[net_sup,kernel_sup,<0.9.0>]},{messages,[]},{links,[#Port<0.100>,<0.17.0>]},{dictionary,[{longnames,false}]},{trap_exit,true},{status,running},{heap_size,987},{stack_size,24},{reductions,512}],[]]} {error_logger,{{2012,7,7},{15,50,31}},supervisor_report,[{supervisor,{local,net_sup}},{errorContext,start_error},{reason,{'EXIT',nodistribution}},{offender,[{pid,undefined},{name,net_kernel},{mfa,{net_kernel,start_link,[[rabbitmqprelaunch877,shortnames]]}},{restart_type,permanent},{shutdown,2000},{child_type,worker}]}]} {error_logger,{{2012,7,7},{15,50,31}},supervisor_report,[{supervisor,{local,kernel_sup}},{errorContext,start_error},{reason,shutdown},{offender,[{pid,undefined},{name,net_sup},{mfa,{erl_distribution,start_link,[]}},{restart_type,permanent},{shutdown,infinity},{child_type,supervisor}]}]} {error_logger,{{2012,7,7},{15,50,31}},std_info,[{application,kernel},{exited,{shutdown,{kernel,start,[normal,[]]}}},{type,permanent}]} {"Kernel pid terminated",application_controller,"{application_start_failure,kernel,{shutdown,{kernel,start,[normal,[]]}}}"} Startup_err: Crash dump was written to: erl_crash.dump Kernel pid terminated (application_controller) ({application_start_failure,kernel,{shutdown,{kernel,start,[normal,[]]}}})

  Read the article

• Looking for updated BIOS for '99 Gateway in order to format/recognize >127 GB HD

  - by Jeff

  I have a '99 Gateway that's apparently too old for even Gateway to acknowledge it exists. Want to use it as a media hub and put in a 320GB HD, but it will not format above 127GB even running Win XP SP3. Read somewhere that upgrading the BIOS may do the trick, but I can't find the correct BIOS, and GW has been no help. Hoping I can just upgrade the BIOS, which is 11 years old. Any help would be much appreciated! I don't know where to look, and searches have been fruitless. System info: OS Name Microsoft Windows XP Home Edition Version 5.1.2600 Service Pack 3 Build 2600 OS Manufacturer Microsoft Corporation System Name xxxx System Manufacturer Gateway System Model TABOR_II System Type X86-based PC Processor x86 Family 6 Model 7 Stepping 3 GenuineIntel ~596 Mhz BIOS Version/Date Intel Corp. 4W4SB0X0.15A.0015.P10, 9/28/1999 SMBIOS Version 2.1 BIOS info (from a free app I located): BIOS Type: Phoenix BIOS Date: September 28th 1999 BIOS ID: 4W4SB0X0.15A.0015.P10.9909281445-None BIOS OEM: 4W4SB0X0.15A.0015.P10 Chipset: Intel 440BX/ZX rev 3 SuperIO: SMC 70x or 80x rev 0 at port 0370 Manufacturer: Gateway Motherboard: WS440BX

  Read the article

• Automatically check for Security Updates on CentOS or Scientific Linux?

  - by Stefan Lasiewski

  We have machines running RedHat-based distros such as CentOS or Scientific Linux. We want the systems to automatically notify us if there are any known vulnerabilities to the installed packages. FreeBSD does this with the ports-mgmt/portaudit port. RedHat provides yum-plugin-security, which can check for vulnerabilities by their Bugzilla ID, CVE ID or advisory ID. In addition, Fedora recently started to support yum-plugin-security. I believe this was added in Fedora 16. Scientific Linux 6 did not support yum-plugin-security as of late 2011. It does ship with /etc/cron.daily/yum-autoupdate, which updates RPMs daily. I don't think this handles Security Updates only, however. CentOS does not support yum-plugin-security. I monitor the CentOS and Scientific Linux mailinglists for updates, but this is tedious and I want something which can be automated. For those of us who maintain CentOS and SL systems, are there any tools which can: Automatically (Progamatically, via cron) inform us if there are known vulnerabilities with my current RPMs. Optionally, automatically install the minimum upgrade required to address a security vulnerability, which would probably be yum update-minimal --security on the commandline? I have considered using yum-plugin-changelog to print out the changelog for each package, and then parse the output for certain strings. Are there any tools which do this already?

  Read the article

• Virtualbox HTTP load testing, host CPU overload issues

  - by aschuler

  I'm doing HTTP load testing benchmarks (using Apache Benchmark and Siege) on a small Java EE 1.7.0 / Tomcat 7.0.26 application running on a Debian Squeeze 6.0.4 x64 virtualized with Virtualbox 4.1.8. The computer host is Ubuntu 11.10 x64. I've modified those parameters in the Tomcat server.xml : <Connector port="8080" protocol="HTTP/1.1" connectionTimeout="200000" redirectPort="8443" acceptCount="2000" maxThreads="150" minSpareThreads="50" /> The application executed on the server takes around 300ms. This app is running well until a certain amount of concurrent connections like those one : ab -n 500 -c 150 http://xx.xx.xx.xx:8080/myapp/ ab -n 1000 -c 50 http://xx.xx.xx.xx:8080/myapp/ siege -b -c 100 -r 20 http://xx.xx.xx.xx:8080/myapp/ A lot of socket connection timed out happens and this completly overload the host processor (but the CPU load inside the VM is normal). Doing an htop on the host, i can see that the Virtualbox processus is running under 300% CPU and never come down even after the load test is finished. (I've allocated 4 processors to the VM, if I allocate only one processor, CPU load goes under 100%). Restarting Tomcat don't do anything, i'm forced to restart the whole VM. I've tryed to launch those ab/siege commands locally on the VM and everything goes well. I first thought it was related to a linux network limit as explained here: Running some benchmarks using ab, and tomcat starts to really slow down So I've modified those TCP parameters : echo 15 > /proc/sys/net/ipv4/tcp_fin_timeout echo 30 > /proc/sys/net/ipv4/tcp_keepalive_intvl echo 1 > /proc/sys/net/ipv4/tcp_tw_recycle echo 1 > /proc/sys/net/ipv4/tcp_tw_reuse It seems to be better, but it continues to overload the host CPU and output socket connections time out at a certain amount of concurrent connections. I'm wondering if this is not related to how Virtualbox handles external concurrent connections.

  Read the article

• Unable to access Windows share

  - by mbnoimi

  I've installed Alfresco 4.2.d under Ubuntu 12.04 LTS; Everything done fine except I can't access it from Windows share although I got the link from Alfresco explorer which is: file:///%5C%5CECSA%5CAlfresco%5CSites%5Cswsdp%5CdocumentLibrary%5CAgency%20Files%5CImages%5Ccoins.JPG I tried to access it from: \\ECSA but I failed too so I made a ping (192.168.0.70 is server IP) then I got: C:\Users\user>ping 192.168.0.70 Pinging 192.168.0.70 with 32 bytes of data: Reply from 192.168.0.70: bytes=32 time<1ms TTL=64 Reply from 192.168.0.70: bytes=32 time<1ms TTL=64 Reply from 192.168.0.70: bytes=32 time<1ms TTL=64 Reply from 192.168.0.70: bytes=32 time<1ms TTL=64 Ping statistics for 192.168.0.70: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms C:\Users\user>ping ECSA Ping request could not find host ECSA. Please check the name and try C:\Users\user> Some logs of what's going on: C:\Users\user>net view ECSA System error 1707 has occurred. The network address is invalid. C:\Users\user>nbtstat -a 192.168.0.70 Local Area Connection: Node IpAddress: [192.168.0.84] Scope Id: [] NetBIOS Remote Machine Name Table Name Type Status --------------------------------------------- ECSA <20> UNIQUE Registered ECSA <00> UNIQUE Registered WORKGROUP <00> GROUP Registered MAC Address = 00-00-00-00-00-00 C:\Users\user> CIFS Server Configuration in file-servers.properties ### CIFS Server Configuration - file-servers.properties ### cifs.enabled=true cifs.serverName=${localname}A cifs.domain= cifs.broadcast=255.255.255.255 cifs.bindto=192.168.0.70 cifs.ipv6.enabled=false cifs.hostannounce=true cifs.disableNIO=false cifs.disableNativeCode=false cifs.sessionTimeout=900 cifs.maximumVirtualCircuitsPerSession=16 cifs.tcpipSMB.port=445 cifs.netBIOSSMB.sessionPort=139 cifs.netBIOSSMB.namePort=137 cifs.netBIOSSMB.datagramPort=138 cifs.WINS.autoDetectEnabled=true cifs.WINS.primary=192.168.0.70 cifs.WINS.secondary=192.168.0.1 cifs.sessionDebug= cifs.pseudoFiles.enabled=true cifs.pseudoFiles.explorerURL.enabled=true cifs.pseudoFiles.explorerURL.fileName=__Alfresco.url cifs.pseudoFiles.shareURL.enabled=false cifs.pseudoFiles.shareURL.fileName=__Share.url How can I fix this issue?

  Read the article

• nginx + wordpress in /wordpress subdir

  - by nkr1pt

  I installed nginx and would like to setup wordpress as a final step. I followed many howtos but am unable to get it working. The setup is fairly straightforward, the root dir of the webserver is /data/Sites/nkr1pt.homelinux.net. In that root dir I created a symlink to the wordpress folder in /usr/local/wordpress, so in fact all wordpress files can be accessed at /data/Sites/nkr1pt.homelinux.net/wordpress. Permissions are ok. The plan is to get wordpress working at http://sirius/wordpress, the server's name is sirius. spawn-fcgi is running and listening on port 7777. Here you can see the relevant config: server { listen 80; listen 8080; server_name sirius; root /data/Sites/nkr1pt.homelinux.net; passenger_enabled on; passenger_base_uri /redmine; #charset koi8-r; #access_log logs/access.log main; location ^~ /data { root /data/Sites/nkr1pt.homelinux.net; autoindex on; auth_basic "Restricted"; auth_basic_user_file htpasswd; } location ^~ /dump { root /data/Sites/nkr1pt.homelinux.net; autoindex on; } location ^~ /wordpress { try_files $uri $uri/ /wordpress/index.php; } # pass the PHP scripts to FastCGI server listening on 127.0.0.1:7777 location ~ \.php$ { #fastcgi_split_path_info ^(/wordpress)(/.*)$; fastcgi_pass localhost:7777; #fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; #index index.php; } please note that redmine, and the locations dump and data are working perfectly, it is only wordpress that I cannot get to work. Can you please help me to the correct wordpress configuration in nginx? All help is much appreciated!

  Read the article

< Previous Page | 318 319 320 321 322 323 324 325 326 327 328 329  | Next Page >