Search Results

Search found 9202 results on 369 pages for 'package structuring'.

Page 323/369 | < Previous Page | 319 320 321 322 323 324 325 326 327 328 329 330  | Next Page >

  • edited and reversed changes on .htaccess - site starts redirecting to .comindex.php/

    - by Aurigae
    Site is a Joomla 2.5 site. I wanted to add a non www to www redirect to the htaccess file, did so, then the redirection went mad, reversed but still the site redirects. When i click view site in admin panel, i get linked to http://domain.comindex.php/ The website is http://www.domain.com Visiting the website URL works without www, but once you click on projects it acts mad too. Projects is managed with joomshopping extension. EDIT: the redirect also happens when rewrite is deactivated in admin panel. ## # @package Joomla # @copyright Copyright (C) 2005 - 2012 Open Source Matters. All rights reserved. # @license GNU General Public License version 2 or later; see LICENSE.txt ## ## # READ THIS COMPLETELY IF YOU CHOOSE TO USE THIS FILE! # # The line just below this section: 'Options +FollowSymLinks' may cause problems # with some server configurations. It is required for use of mod_rewrite, but may already # be set by your server administrator in a way that dissallows changing it in # your .htaccess file. If using it causes your server to error out, comment it out (add # to # beginning of line), reload your site in your browser and test your sef url's. If they work, # it has been set by your server administrator and you do not need it set here. ## ## Can be commented out if causes errors, see notes above. Options +FollowSymLinks ## Mod_rewrite in use. RewriteEngine On ## Begin - Rewrite rules to block out some common exploits. # If you experience problems on your site block out the operations listed below # This attempts to block the most common type of exploit `attempts` to Joomla! # # Block out any script trying to base64_encode data within the URL. RewriteCond %{QUERY_STRING} base64_encode[^(]*\([^)]*\) [OR] # Block out any script that includes a <script> tag in URL. RewriteCond %{QUERY_STRING} (<|%3C)([^s]*s)+cript.*(>|%3E) [NC,OR] # Block out any script trying to set a PHP GLOBALS variable via URL. RewriteCond %{QUERY_STRING} GLOBALS(=|\[|\%[0-9A-Z]{0,2}) [OR] # Block out any script trying to modify a _REQUEST variable via URL. RewriteCond %{QUERY_STRING} _REQUEST(=|\[|\%[0-9A-Z]{0,2}) # Return 403 Forbidden header and show the content of the root homepage RewriteRule .* index.php [F] # ## End - Rewrite rules to block out some common exploits. ## Begin - Custom redirects # # If you need to redirect some pages, or set a canonical non-www to # www redirect (or vice versa), place that code here. Ensure those # redirects use the correct RewriteRule syntax and the [R=301,L] flags. # ## End - Custom redirects ## # Uncomment following line if your webserver's URL # is not directly related to physical file paths. # Update Your Joomla! Directory (just / for root). ## # RewriteBase / ## Begin - Joomla! core SEF Section. # RewriteRule .* - [E=HTTP_AUTHORIZATION:%{HTTP:Authorization}] # # If the requested path and file is not /index.php and the request # has not already been internally rewritten to the index.php script RewriteCond %{REQUEST_URI} !^/index\.php # and the request is for something within the component folder, # or for the site root, or for an extensionless URL, or the # requested URL ends with one of the listed extensions RewriteCond %{REQUEST_URI} /component/|(/[^.]*|\.(php|html?|feed|pdf|vcf|raw))$ [NC] # and the requested path and file doesn't directly match a physical file RewriteCond %{REQUEST_FILENAME} !-f # and the requested path and file doesn't directly match a physical folder RewriteCond %{REQUEST_FILENAME} !-d # internally rewrite the request to the index.php script RewriteRule .* index.php [L] # ## End - Joomla! core SEF Section. Redirect 301 /index.html /index.php Redirect 301 /services /project Redirect 301 /projects/projects.html /project Redirect 301 /projects/project1.html /project Redirect 301 /projects/project2.html /project Redirect 301 /projects /project Redirect 301 /keypersonnel.html /about-agrin/keystaff Redirect 301 /cooperation.htm /about-agrin/intcoop Redirect 301 /member.html /about-agrin/memberships Redirect 301 /contact.html /contacts Redirect 301 /hr.htm /jobs Redirect 301 /index.php/404 /index.php

    Read the article

  • Cannot get ATI Drivers installed

    - by bittoast67
    I am trying to install the Catalyst driver. The best I can get is a strange resolution problem and firefox acts all wonkt. The worst I have gotten is low graphics mode in which I just reinstall Ubuntu. I have a HP Pavilion Dv7 laptop. With Radeon 3200 HD. I plan to try again with a fresh install of Ubuntu 12.4.3 as I have heard its the most compatible. This is what I have done: I have tried just the easy way of going to synaptic and installing the drivers that way. the fglrx package (not the fglrx update). And if memory serves I think that boots me into low graphics mode. So, fresh install of Ubuntu and tried again. I have done everything a couple times from this site (http://wiki.cchtml.com/index.php/Ubuntu_Precise_Installation_Guide) following every instruction to a T. That gets me something, such as a lowered fan speed and a much cooler computer, but I also lose most of my resolution. And displays says its the best resolution I can get. I also have a very screwy firefox. Using this method I can see AMD Catalyst Control Center in my dash (two of them really one administrator and one not) but when I try to open it it says no amd driver detected. So again, ubuntu reinstall. I have tried the GUI method from the Legacy driver I got from AMD's site. It runs through smoothly and at the very end after I exit the installer it gives me an error. I have also tried various other methods using terminal, as well as various different drivers (the one from the amd's site and the one suggested in the above link for my graphics card) both to no avail. When I try the method in the link on number 2, and I get the super low res and screwy fire fox. I type in, fglrxinfo ,and get a badrequest error. I have yet to type in fglrxinfo and get anything like what I am supposed to. UPDATE: I am now currently reinstalling Ubuntu 12.4. I tried the above mentioned link - thank you very much!- just to see on the previously failed driver attempt by following the purge commands. And to no avail when typing fglrxinfo I still get the badrequest thing. I will update again after a try with a true fresh install. Thanks again!! UPDATE: Alright everyone. Still no go. I have done everything word per word in the provided tutorial. I have rebooted my computer again to a fucked up resolution and this is what I get when typing fglrxinfo: $ fglrxinfo X Error of failed request: BadRequest (invalid request code or no such operation) Major opcode of failed request: 153 (GLX) Minor opcode of failed request: 19 (X_GLXQueryServerString) Serial number of failed request: 12 Current serial number in output stream: 12 I would like to add that when installing this file: fglrx_8.970-0ubuntu1_amd64.deb I got this: Building initial module for 3.8.0-29-generic Error! Bad return status for module build on kernel: 3.8.0-29-generic (x86_64) Consult /var/lib/dkms/fglrx/8.970/build/make.log for more information. update-initramfs: deferring update (trigger activated) Processing triggers for ureadahead ... Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-3.8.0-29-generic Processing triggers for libc-bin ... ldconfig deferred processing now taking place Any ideas? Anyone? I cant for the life of me figure out what I am doing wrong.

    Read the article

  • Using Private Extension Galleries in Visual Studio 2012

    - by Jakob Ehn
    Note: The installer and the complete source code is available over at CodePlex at the following location: http://inmetavsgallery.codeplex.com   Extensions and addins are everywhere in the Visual Studio ALM ecosystem! Microsoft releases new cool features in the form of extensions and the list of 3rd party extensions that plug into Visual Studio just keeps growing. One of the nice things about the VSIX extensions is how they are deployed. Microsoft hosts a public Visual Studio Gallery where you can upload extensions and make them available to the rest of the community. Visual Studio checks for updates to the installed extensions when you start Visual Studio, and installing/updating the extensions is fast since it is only a matter of extracting the files within the VSIX package to the local extension folder. But for custom, enterprise-specific extensions, you don’t want to publish them online to the whole world, but you still want an easy way to distribute them to your developers and partners. This is where Private Extension Galleries come into play. In Visual Studio 2012, it is now possible to add custom extensions galleries that can point to any URL, as long as that URL returns the expected content of course (see below).Registering a new gallery in Visual Studio is easy, but there is very little documentation on how to actually host the gallery. Visual Studio galleries uses Atom Feed XML as the protocol for delivering new and updated versions of the extensions. This MSDN page describes how to create a static XML file that returns the information about your extensions. This approach works, but require manual updates of that file every time you want to deploy an update of the extension. Wouldn’t it be nice with a web service that takes care of this for you, that just lets you drop a new version of your VSIX file and have it automatically detect the new version and produce the correct Atom Feed XML? Well search no more, this is exactly what the Inmeta Visual Studio Gallery Service does for you :-) Here you can see that in addition to the standard Online galleries there is an Inmeta Gallery that contains two extensions (our WIX templates and our custom TFS Checkin Policies). These can be installed/updated i the same way as extensions from the public Visual Studio Gallery. Installing the Service Download the installler (Inmeta.VSGalleryService.Install.msi) for the service and run it. The installation is straight forward, just select web site, application pool and (optional) a virtual directory where you want to install the service.   Note: If you want to run it in the web site root, just leave the application name blank Press Next and finish the installer. Open web.config in a text editor and locate the the <applicationSettings> element Edit the following setting values: FeedTitle This is the name that is shown if you browse to the service using a browser. Not used by Visual Studio BaseURI When Visual Studio downloads the extension, it will be given this URI + the name of the extension that you selected. This value should be on the following format: http://SERVER/[VDIR]/gallery/extension/ VSIXAbsolutePath This is the path where you will deploy your extensions. This can be a local folder or a remote share. You just need to make sure that the application pool identity account has read permissions in this folder Save web.config to finish the installation Open a browser and enter the URL to the service. It should show an empty Feed page:   Adding the Private Gallery in Visual Studio 2012 Now you need to add the gallery in Visual Studio. This is very easy and is done as follows: Go to Tools –> Options and select Environment –> Extensions and Updates Press Add to add a new gallery Enter a descriptive name, and add the URL that points to the web site/virtual directory where you installed the service in the previous step   Press OK to save the settings. Deploying an Extension This one is easy: Just drop the file in the designated folder! :-)  If it is a new version of an existing extension, the developers will be notified in the same way as for extensions from the public Visual Studio gallery: I hope that you will find this sever useful, please contact me if you have questions or suggestions for improvements!

    Read the article

  • Integrating Amazon S3 in Java via NetBeans IDE

    - by Geertjan
    To continue from yesterday, let's set up a scenario that enables us to make use of this drag/drop service in NetBeans IDE: The above service is applicable to Amazon S3, an Amazon storage provider that is typically used to store large binary files. In Amazon S3, every object stored is contained in a bucket. Buckets partition the namespace of objects stored in Amazon S3. More on buckets here. Let's use the tools in NetBeans IDE to create a Java application that accesses our Amazon S3 buckets. Create a Java application named "AmazonBuckets" with a main class named "AmazonBuckets". Open the main class and then drag the above service into the main method of the class. Now, NetBeans IDE will create all the other classes and the properties file that you see in the screenshot below. The first thing to do is to open the properties file above and enter the access key and secret: access_key=SOMETHINGsecret=SOMETHINGELSE Now you're all set up. Make sure to, of course, actually have some buckets available: Then rewrite the Java class to parse the XML that is returned via the generated code: package amazonbuckets;import java.io.ByteArrayInputStream;import java.io.IOException;import javax.xml.parsers.DocumentBuilder;import javax.xml.parsers.DocumentBuilderFactory;import javax.xml.parsers.ParserConfigurationException;import org.netbeans.saas.amazon.AmazonS3Service;import org.netbeans.saas.RestResponse;import org.w3c.dom.DOMException;import org.w3c.dom.Document;import org.w3c.dom.Node;import org.w3c.dom.NodeList;import org.xml.sax.InputSource;import org.xml.sax.SAXException;public class AmazonBuckets {    public static void main(String[] args) {        try {            RestResponse result = AmazonS3Service.getBuckets();            String dataAsString = result.getDataAsString();            DocumentBuilderFactory dbFactory = DocumentBuilderFactory.newInstance();            DocumentBuilder dBuilder = dbFactory.newDocumentBuilder();            Document doc = dBuilder.parse(                    new InputSource(new ByteArrayInputStream(dataAsString.getBytes("utf-8"))));            NodeList bucketList = doc.getElementsByTagName("Bucket");            for (int i = 0; i < bucketList.getLength(); i++) {                Node node = bucketList.item(i);                System.out.println("Bucket Name: " + node.getFirstChild().getTextContent());            }        } catch (IOException | ParserConfigurationException | SAXException | DOMException ex) {        }    }}That's all. This is simpler to setup than the scenario described yesterday. Also notice that there are other Amazon S3 services you can interact with from your Java code, again after generating a heap of code after drag/drop into a Java source file: I tried the above, e.g., I created a new Amazon S3 bucket after dragging "createBucket", adding my credentials in the properties file, and then running the code that had been created. I.e., without adding a single line of code I was able to programmatically create new buckets. The above outlines a handy set of tools and techniques to use if you want to let your users store and access data in Amazon S3 buckets directly from the application you've created for them.

    Read the article

  • Can someone explain the true landscape of Rails vs PHP deployment, particularly within the context of Reseller-based web hosting (e.g., Hostgator)?

    - by rcd
    Currently, I have a reseller account with the company HostGator. I design websites, which up until now have occasionally been wrapped in Wordpress CMSs and the like (PHP applications). I then sell hosting (of the site I've designed) to the client, which is pretty simple, in that I can simply click a button and add a new shared hosting account/site with whatever settings I want. Furthermore, I then utilize WHMCS to automate billing and account management. It's a nice package and pretty simple. I pay something like $25 a month, and can sell a hundred accounts under this (because my clients bandwidth requirements are low). Now I am finding the need to develop more customized applications, including a minimalist CMS and several proprietary things. I soon anticipate developing these apps for clients as well. Thus, I've spent the past few months learning Rails, and it's coming along well now. The thing that has nagged at me all along, though, is the deployment issue. I can't wrap my brain around it. It seems like all of the popular options (Heroku, etc) have nice automation with git and are set up in the "Rails Way". I get that (sort of). But it's terribly expensive... a single dyno, a helper, and the cheapest database (which they say is mainly suitable for testing) that isn't limited to 5MB runs $51. This is for ONE app!!! Throw in a "production" DB and you're over $200. This is like... the same prices as getting a server somewhere, right? Meanwhile, going back to what I guess is a "traditional" hosting environment with Hostgator, their server only has Ruby 1.8.7 and Rails 2.3.5... No Rails 3. AND, no Passenger (not that I really understand the difference in CGI or mod_rails or whatever, but they say Passenger is the simplest). So I'm to understand that if I build an app in Rails 3, it won't run at all on this host? But damn, I already have these accounts under my reseller account there, all running static html and/or PHP stuff, right? So what now? How do I get all of this under one simple (and affordable) roof? Forgive my ignorance, but I just don't get it. Managing a VPS is cool and all, but entails learning server admin stuff and security... And it's expensive. I get that a shared and/or reseller "server-based" (forgive the terminology) may be inadequate for large-scale apps that use a lot of bandwidth... But what about for those of us who are building real (but small and low bandwidth) apps (with Rails) and who want to deploy them simply, cheaply, using the same conceptual approach as PHP? Even after learning all of this Ruby and Rails stuff for months, I'm questioning whether it's worth it when it comes to deployment. I want to build a small app, upload it to my home directory on a shared server account, and just make it run. Why should that be so hard? Am I just choosing the wrong language/framework? Forgive my ignorance in the subject; these questions are not rhetorical; just trying to learn here. So: 1) I'd appreciate if someone could give me a good rundown of how to understand deployment in Rails vs. PHP. 2) I'd appreciate if someone could address my issue with running a hosting/web business around reseller hosting (Hostgator) while also being able to host Rails apps. Can it be done? And how can a company like Hostgator completely ignore what's current in Rails/Ruby? Thanks.

    Read the article

  • why my code still cannot connect with database? [closed]

    - by Wen Teng
    package com.mems.travis; import java.util.ArrayList; import java.util.List; import org.apache.http.NameValuePair; import org.apache.http.message.BasicNameValuePair; import org.json.JSONObject; import android.app.Activity; import android.app.AlertDialog; import android.content.DialogInterface; import android.content.Intent; import android.os.AsyncTask; import android.os.Bundle; import android.util.Log; import android.view.View; import android.widget.Button; import android.widget.EditText; import android.widget.RadioButton; public class UserRegister extends Activity { JSONParser jsonParser = new JSONParser(); EditText inputName; EditText inputUsername; EditText inputEmail; EditText inputPassword; RadioButton button1; RadioButton button2; Button button3; int success = 0; // url to create new product private static String url_register_user = "http://192.168.1.100/MEMS/add_user.php"; // JSON Node names private static final String TAG_SUCCESS = "success"; @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.activity_user_register); // Edit Text inputName = (EditText) findViewById(R.id.nameTextBox); inputUsername = (EditText) findViewById(R.id.usernameTextBox); inputEmail = (EditText) findViewById(R.id.emailTextBox); inputPassword = (EditText) findViewById(R.id.pwTextBox); // Create button //RadioButton button1 = (RadioButton) findViewById(R.id.studButton); // RadioButton button2 = (RadioButton) findViewById(R.id.shopownerButton); Button button3 = (Button) findViewById(R.id.regSubmitButton); // button click event button3.setOnClickListener(new View.OnClickListener() { public void onClick(View view) { String name = inputName.getText().toString(); String username = inputUsername.getText().toString(); String email = inputEmail.getText().toString(); String password = inputPassword.getText().toString(); if (name.contentEquals("")||username.contentEquals("")||email.contentEquals("")||password.contentEquals("")) { AlertDialog.Builder builder = new AlertDialog.Builder(UserRegister.this); // 2. Chain together various setter methods to set the dialog characteristics builder.setMessage(R.string.nullAlert) .setTitle(R.string.alertTitle); builder.setPositiveButton(R.string.ok, new DialogInterface.OnClickListener() { public void onClick(DialogInterface dialog, int id) { // User clicked OK button } }); // 3. Get the AlertDialog from create() AlertDialog dialog = builder.show(); } else { new RegisterNewUser().execute(); } } }); } class RegisterNewUser extends AsyncTask<String, String, String>{ protected String doInBackground(String... args) { String name = inputName.getText().toString(); String username = inputUsername.getText().toString(); String email = inputEmail.getText().toString(); String password = inputPassword.getText().toString(); // Building Parameters List<NameValuePair> params = new ArrayList<NameValuePair>(); params.add(new BasicNameValuePair("name", name)); params.add(new BasicNameValuePair("username", username)); params.add(new BasicNameValuePair("email", email)); params.add(new BasicNameValuePair("password", password)); // getting JSON Object // Note that create product url accepts POST method JSONObject json = jsonParser.makeHttpRequest(url_register_user, "GET", params); // check log cat for response Log.d("Send Notification", json.toString()); try { int success = json.getInt(TAG_SUCCESS); if (success == 1) { // successfully created product Intent i = new Intent(getApplicationContext(), StudentLogin.class); startActivity(i); finish(); } else { // failed to register } } catch (Exception e) { e.printStackTrace(); } return null; } } }

    Read the article

  • apt-get update error after removing apt-key

    - by Caterpillar
    After Running apt-get update on ubuntu 10.04 server, I found this issue, Can any help me to solve this issue. Before this I had remove apt-key. Where can I get this apt-key to add it again. apt-get update Get:1 http://security.ubuntu.com lucid-security Release.gpg [198B] Ign http://security.ubuntu.com/ubuntu/ lucid-security/main Translation-en_IN Ign http://security.ubuntu.com/ubuntu/ lucid-security/restricted Translation-en_IN Get:2 http://in.archive.ubuntu.com lucid Release.gpg [189B] Ign http://in.archive.ubuntu.com/ubuntu/ lucid/main Translation-en_IN Ign http://in.archive.ubuntu.com/ubuntu/ lucid/restricted Translation-en_IN Ign http://security.ubuntu.com/ubuntu/ lucid-security/universe Translation-en_IN Ign http://security.ubuntu.com/ubuntu/ lucid-security/multiverse Translation-en_IN Get:3 http://security.ubuntu.com lucid-security Release [44.7kB] Err http://security.ubuntu.com lucid-security Release Ign http://in.archive.ubuntu.com/ubuntu/ lucid/universe Translation-en_IN Ign http://in.archive.ubuntu.com/ubuntu/ lucid/multiverse Translation-en_IN Get:4 http://in.archive.ubuntu.com lucid-updates Release.gpg [198B] Ign http://in.archive.ubuntu.com/ubuntu/ lucid-updates/main Translation-en_IN Ign http://in.archive.ubuntu.com/ubuntu/ lucid-updates/restricted Translation-en_IN Ign http://in.archive.ubuntu.com/ubuntu/ lucid-updates/universe Translation-en_IN Ign http://in.archive.ubuntu.com/ubuntu/ lucid-updates/multiverse Translation-en_IN Hit http://in.archive.ubuntu.com lucid Release Ign http://in.archive.ubuntu.com lucid Release Get:5 http://in.archive.ubuntu.com lucid-updates Release [44.7kB] Err http://in.archive.ubuntu.com lucid-updates Release Hit http://in.archive.ubuntu.com lucid/main Packages Hit http://in.archive.ubuntu.com lucid/restricted Packages Hit http://in.archive.ubuntu.com lucid/main Sources Hit http://in.archive.ubuntu.com lucid/restricted Sources Hit http://in.archive.ubuntu.com lucid/universe Packages Hit http://in.archive.ubuntu.com lucid/universe Sources Hit http://in.archive.ubuntu.com lucid/multiverse Packages Hit http://in.archive.ubuntu.com lucid/multiverse Sources Fetched 587B in 1s (465B/s) Reading package lists... Done W: A error occurred during the signature verification. The repository is not updated and the previous index files will be used.GPG error: http://security.ubuntu.com lucid-security Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 40976EAF437D05B5 W: GPG error: http://in.archive.ubuntu.com lucid Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 40976EAF437D05B5 W: A error occurred during the signature verification. The repository is not updated and the previous index files will be used.GPG error: http://in.archive.ubuntu.com lucid-updates Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 40976EAF437D05B5 W: Failed to fetch http://security.ubuntu.com/ubuntu/dists/lucid-security/Release W: Failed to fetch http://in.archive.ubuntu.com/ubuntu/dists/lucid-updates/Release W: Some index files failed to download, they have been ignored, or old ones used instead.

    Read the article

  • How to debug Ubuntu/Cisco VPN issues

    - by Joe Casadonte
    I'm trying to connect an Ubuntu laptop (9.10) with some kind of Cisco VPN device; I don't know what's on the other end, and I'm not likely to find out exactly what. I know my company allows VPN from Linux clients because they provide one that I cannot get to install (it fails to compile). I've had the most luck with the network-manager-vpnc package, however I can't figure out what's failing. When I try to connect, I get this message from libnotify: The VPN connection 'XXX' failed. which is not very helpful. I've scoured the system logs and all I can find is this: Dec 27 12:57:45 jcasadon-lap NetworkManager: <info> Starting VPN service 'org.freedesktop.NetworkManager.vpnc'... Dec 27 12:57:45 jcasadon-lap NetworkManager: <info> VPN service 'org.freedesktop.NetworkManager.vpnc' started (org.freedesktop.NetworkManager.vpnc), PID 2672 Dec 27 12:57:45 jcasadon-lap NetworkManager: <info> VPN service 'org.freedesktop.NetworkManager.vpnc' just appeared, activating connections Dec 27 12:58:00 jcasadon-lap NetworkManager: <info> VPN plugin state changed: 3 Dec 27 12:58:00 jcasadon-lap NetworkManager: <info> VPN connection 'AmericasEast' (Connect) reply received. Dec 27 12:58:00 jcasadon-lap NetworkManager: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/tun0, iface: tun0) Dec 27 12:58:00 jcasadon-lap kernel: [ 6144.529002] tun0: Disabled Privacy Extensions Dec 27 12:58:00 jcasadon-lap NetworkManager: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/tun0, iface: tun0): no ifupdown configuration found. Dec 27 12:58:15 jcasadon-lap NetworkManager: SCPlugin-Ifupdown: devices removed (path: /sys/devices/virtual/net/tun0, iface: tun0) Dec 27 12:58:15 jcasadon-lap NetworkManager: <info> VPN plugin failed: 1 Dec 27 12:58:15 jcasadon-lap NetworkManager: <info> VPN plugin state changed: 6 Dec 27 12:58:15 jcasadon-lap NetworkManager: <info> VPN plugin state change reason: 0 Dec 27 12:58:15 jcasadon-lap NetworkManager: <WARN> connection_state_changed(): Could not process the request because no VPN connection was active. Dec 27 12:58:15 jcasadon-lap NetworkManager: <info> (wlan0): writing resolv.conf to /sbin/resolvconf Dec 27 12:58:15 jcasadon-lap NetworkManager: <info> Policy set 'Northbound Train' (wlan0) as default for routing and DNS. Dec 27 12:58:27 jcasadon-lap NetworkManager: <debug> [1261936707.002971] ensure_killed(): waiting for vpn service pid 2672 to exit Dec 27 12:58:27 jcasadon-lap NetworkManager: <debug> [1261936707.003175] ensure_killed(): vpn service pid 2672 cleaned up I have no idea where to go from here. Tomorrow I'll ask the IT/IS guys if there's anything they can tell me from their end, but I don't know if they'll be able to tell me anything. Any ideas? Thanks!

    Read the article

  • How to set up Mod_WSGI for Python on Ubuntu

    - by AutomatedTester
    Hi, I am trying to setup MOD_WSGI on my Ubuntu box. I have found steps that said I needed to do the following steps I found at http://ubuntuforums.org/showthread.php?t=833766 sudo apt-get install libapache2-mod-wsgi sudo a2enmod mod-wsgi sudo /etc/init.d/apache2 restart sudo gedit /etc/apache2/sites-available/default and update the Directory <Directory /var/www/> Options Indexes FollowSymLinks MultiViews ExecCGI AddHandler cgi-script .cgi AddHandler wsgi-script .wsgi AllowOverride None Order allow,deny allow from all </Directory> sudo /etc/init.d/apache2 restart Created test.wsgi with def application(environ, start_response): status = '200 OK' output = 'Hello World!' response_headers = [('Content-type', 'text/plain'), ('Content-Length', str(len(output)))] start_response(status, response_headers) return [output] Step 2 fails because it says it can't find mod-wsgi even though the apt-get found it. If I carry on with the steps the python app just shows as plain text in a browser. Any ideas what I have done wrong? EDIT: Results for questions asked automatedtester@ubuntu:~$ dpkg -l libapache2-mod-wsgi Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Cfg-files/Unpacked/Failed-cfg/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ Name Version Description +++-======================================-======================================-============================================================================================ ii libapache2-mod-wsgi 2.5-1 Python WSGI adapter module for Apache automatedtester@ubuntu:~$ dpkg -s libapache2-mod-wsgi Package: libapache2-mod-wsgi Status: install ok installed Priority: optional Section: python Installed-Size: 376 Maintainer: Ubuntu MOTU Developers <[email protected]> Architecture: i386 Source: mod-wsgi Version: 2.5-1 Depends: apache2, apache2.2-common, libc6 (>= 2.4), libpython2.6 (>= 2.6), python (>= 2.5), python (<< 2.7) Suggests: apache2-mpm-worker | apache2-mpm-event Conffiles: /etc/apache2/mods-available/wsgi.load 06d2b4d2c95b28720f324bd650b7cbd6 /etc/apache2/mods-available/wsgi.conf 408487581dfe024e8475d2fbf993a15c Description: Python WSGI adapter module for Apache The mod_wsgi adapter is an Apache module that provides a WSGI (Web Server Gateway Interface, a standard interface between web server software and web applications written in Python) compliant interface for hosting Python based web applications within Apache. The adapter provides significantly better performance than using existing WSGI adapters for mod_python or CGI. Original-Maintainer: Debian Python Modules Team <[email protected]> Homepage: http://www.modwsgi.org/ automatedtester@ubuntu:~$ sudo a2enmod libapache2-mod-wsgi ERROR: Module libapache2-mod-wsgi does not exist! automatedtester@ubuntu:~$ sudo a2enmod mod-wsgi ERROR: Module mod-wsgi does not exist! FURTHER EDIT FOR RMYates automatedtester@ubuntu:~$ apache2ctl -t -D DUMP_MODULES apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName Loaded Modules: core_module (static) log_config_module (static) logio_module (static) mpm_worker_module (static) http_module (static) so_module (static) alias_module (shared) auth_basic_module (shared) authn_file_module (shared) authz_default_module (shared) authz_groupfile_module (shared) authz_host_module (shared) authz_user_module (shared) autoindex_module (shared) cgid_module (shared) deflate_module (shared) dir_module (shared) env_module (shared) mime_module (shared) negotiation_module (shared) python_module (shared) setenvif_module (shared) status_module (shared) Syntax OK automatedtester@ubuntu:~$

    Read the article

  • How to start networking on a wired interface before logon in Ubuntu Desktop Edition

    - by Burly
    Problem Ubuntu 9.10 Desktop Edition (and possibly previous versions as well, I haven't tested them) has no network connections after boot until at least 1 user logs in. This means any services that require networking (e.g. openssh-server) are not available until someone logs in locally either via gdm, kdm, or a TTY. Background Ubuntu 9.10 Desktop Edition uses the NetworkManager service to take commands from the nm-applet in Gnome (or it's equivalent in KDE). As I understand it, while NetworkManager is running at boot, it is not issued any commands to connect until you login for the first time because nm-applet isn't running until you login and your Gnome session starts (or similar for KDE). I'm not sure what prompts NetworkManager to connect to the network when you login via a TTY. There are several relevant variables involved in starting up the network connections including: Wired vs Wireless (and the resulting drivers, SSID, passwords, and priorities) Static vs DHCP Multiple interfaces Constraints Support Ubuntu 9.10 Karmic Koala (bonus points for additional supported versions) Support wired eth0 interface Receive an IP address via DHCP Receive DNS information via DHCP (obviously the DHCP server must provide this information) Enable networking at the proper time (e.g. some time after file systems are loaded but before network services like ssh start) Switching distros or versions (e.g. to Server Edition) is not an acceptable solution Switching to a Static IP configuration is not an acceptable solution Question How to start networking on a wired interface before logon in Ubuntu Desktop Edition? What I have tried Per this guide, adding the following entry into /etc/network/interfaces so that NetworkManager won't manage the eth0 interface: auth eth0 iface inet dhcp After reboot eth0 is down. Issuing ifconfig eth0 up brings the interface up but it receives no IP address. Issuing dhclient eth0 instead Does bring up the interface and it Does receive an IP address. Completely removing the NetworkManager package in addition to the settings above. I'm a bit confused with the whole UpStart/SysVinit mangling that's going in Ubuntu currently (I'm more familiar with the CentOS world). However, directly issuing sudo /etc/init.d/networking start Or sudo start networking does not bring up the eth0 interface at all, much less get an IP address. See-Also How to force NetworkManager to make a connection before login? References Ubuntu Desktop Edition Ubuntu Networking Configuration Using Command Line Automatic Network Configuration Via Command-Line Start network connection before login

    Read the article

  • Debian keyring error: "No keyring installed"

    - by donatello
    I have a Debian Squeeze EC2 AMI. On booting up an instance with it and trying to install packages with apt-get I get errors saying there is no keyring installed. Here is the error with apt-get update: root@ip:~# apt-get update Get:1 http://ftp.us.debian.org squeeze Release.gpg [1672 B] Ign http://ftp.us.debian.org/debian/ squeeze/contrib Translation-en Ign http://ftp.us.debian.org/debian/ squeeze/main Translation-en Ign http://ftp.us.debian.org/debian/ squeeze/non-free Translation-en Get:2 http://security.debian.org squeeze/updates Release.gpg [836 B] Ign http://security.debian.org/ squeeze/updates/contrib Translation-en Ign http://security.debian.org/ squeeze/updates/main Translation-en Hit http://ftp.us.debian.org squeeze Release Ign http://ftp.us.debian.org squeeze Release Ign http://security.debian.org/ squeeze/updates/non-free Translation-en Ign http://ftp.us.debian.org squeeze/main Sources/DiffIndex Get:3 http://security.debian.org squeeze/updates Release [86.9 kB] Ign http://security.debian.org squeeze/updates Release Ign http://ftp.us.debian.org squeeze/contrib Sources/DiffIndex Ign http://ftp.us.debian.org squeeze/non-free Sources/DiffIndex Ign http://ftp.us.debian.org squeeze/main amd64 Packages/DiffIndex Ign http://ftp.us.debian.org squeeze/contrib amd64 Packages/DiffIndex Ign http://ftp.us.debian.org squeeze/non-free amd64 Packages/DiffIndex Ign http://security.debian.org squeeze/updates/main Sources/DiffIndex Hit http://ftp.us.debian.org squeeze/main Sources Hit http://ftp.us.debian.org squeeze/contrib Sources Hit http://ftp.us.debian.org squeeze/non-free Sources Hit http://ftp.us.debian.org squeeze/main amd64 Packages Hit http://ftp.us.debian.org squeeze/contrib amd64 Packages Ign http://security.debian.org squeeze/updates/contrib Sources/DiffIndex Ign http://security.debian.org squeeze/updates/non-free Sources/DiffIndex Ign http://security.debian.org squeeze/updates/main amd64 Packages/DiffIndex Ign http://security.debian.org squeeze/updates/contrib amd64 Packages/DiffIndex Ign http://security.debian.org squeeze/updates/non-free amd64 Packages/DiffIndex Hit http://ftp.us.debian.org squeeze/non-free amd64 Packages Get:4 http://backports.debian.org squeeze-backports Release.gpg [836 B] Ign http://backports.debian.org/debian-backports/ squeeze-backports/main Translation-en Hit http://security.debian.org squeeze/updates/main Sources Hit http://security.debian.org squeeze/updates/contrib Sources Hit http://security.debian.org squeeze/updates/non-free Sources Hit http://security.debian.org squeeze/updates/main amd64 Packages Hit http://security.debian.org squeeze/updates/contrib amd64 Packages Hit http://security.debian.org squeeze/updates/non-free amd64 Packages Get:5 http://backports.debian.org squeeze-backports Release [77.6 kB] Ign http://backports.debian.org squeeze-backports Release Hit http://backports.debian.org squeeze-backports/main amd64 Packages/DiffIndex Hit http://backports.debian.org squeeze-backports/main amd64 Packages Fetched 3346 B in 0s (5298 B/s) Reading package lists... Done W: GPG error: http://ftp.us.debian.org squeeze Release: No keyring installed in /etc/apt/trusted.gpg.d/. W: GPG error: http://security.debian.org squeeze/updates Release: No keyring installed in /etc/apt/trusted.gpg.d/. W: GPG error: http://backports.debian.org squeeze-backports Release: No keyring installed in /etc/apt/trusted.gpg.d/. Googling around didn't really help me fix this problem. I tried installing the packages "debian-keyring" and "debian-archive-keyring" but the error does not go away. I'd like to avoid installing unstrusted packages. Any help is appreciated! Why does this error happen and where can I learn more?

    Read the article

  • pxe boot fails with message: no DEFAULT or UI configuration directive found

    - by spockaroo
    I am trying to pxe-boot a machine (client), and in the process I am trying to setup a tftp server that this machine can boot off. On the server, which runs Ubuntu 10.10, I have setup dhcp, dns, nfs, and tftp-hpa servers. All the servers/deamons start fine. I tested the tftp server by using a tftp client and downloading a file that the server directory hosts. My /etc/xinet.d/tftp looks like this service tftp { disable = no socket_type = dgram wait = yes user = nobody server = /usr/sbin/in.tftpd server_args = -v -s /var/lib/tftpboot only_from = 10.1.0.0/24 interface = 10.1.0.1 } My /etc/default/tftpd-hpa looks like this RUN_DAEMON="yes" OPTIONS="-l -s /var/lib/tftpboot" TFTP_USERNAME="tftp" TFTP_DIRECTORY="/var/lib/tftpboot" TFTP_ADDRESS="0.0.0.0:69" TFTP_OPTIONS="--secure" My /var/lib/tftpboot/ directory looks like this initrd.img-2.6.35-25-generic-pae vmlinuz-2.6.35-25-generic-pae pxelinux.0 pxelinux.cfg -- default I did sudo chmod 644 /var/lib/tftpboot/pxelinux.cfg/default chmod 755 /var/lib/tftpboot/initrd.img-2.6.35-25-generic-pae chmod 755 /var/lib/tftpboot/vmlinuz-2.6.35-25-generic-pae /var/lib/tftpboot/pxelinux.cfg has the following contents SERIAL 0 19200 0 LABEL linux KERNEL vmlinuz-2.6.35-25-generic-pae APPEND root=/dev/nfs initrd=initrd.img-2.6.35-25-generic-pae nfsroot=10.1.0.1:/nfsroot ip=dhcp console=ttyS0,19200n8 rw I copied /var/lib/tftpboot/pxelinux.0 from /usr/lib/syslinux/ after installing the package syslinux-common. Also just for completeness, /etc/dhcp3/dhcpd.conf the following lines (relevant to this interface) subnet 10.1.0.0 netmask 255.255.255.0 { range 10.1.0.100 10.1.0.240; option routers 10.1.0.1; option broadcast-address 10.1.0.255; option domain-name-servers 10.1.0.1; filename "pxelinux.0"; } When I boot the client machine, and watch the output over the serial port, I notice that the client requests an ip address from the server and gets it. Then I see TFTP being displayed - indicating that it is trying to connect to the TFTP server. This succeeds, and I see TFTP.|, which return immediately displaying the following message PXELINUX 4.01 debian-20100714 Copyright (C) 1994-2010 H. Peter Anvin et al No DEFAULT or UI configuration directive found! boot: /var/log/syslog shows Feb 20 15:24:05 ch in.tftpd[2821]: tftp: client does not accept options What option is it talking about in the syslog? I assume it is referring to OPTIONS or TFTP_OPTIONS, but what am I doing wrong?

    Read the article

  • Win7 playback of dvr-ms files stutters

    - by Jim Lynn
    I've just had to install Windows 7 on my Media Center machine because my Vista installation had a faulty drive. I've got the latest drivers that I can find - Intel 945GM integrated Graphics, Realtek audio drivers. Things are working OK with one exception. Playback of old recordings, from dvr-ms format files, is choppy. The picture freezes for a fraction of a second, then quickly catches up. The sound is uninterrupted and doesn't pause. These freezes happen once every 5 seconds or so. It's very regular. Playback of Live TV from the digital tuner is perfectly smooth. DVD playback is perfectly smooth. As an experiment, I used the MPEG editing package VideoReDo to create a small test file in three different formats. This program takes the raw MPEG streams and repackages them into the desired container. I took the same clip and created three files in three formats: dvr-ms (Microsoft's old recorded TV format); mpg (standard MPEG); and ts (raw MPEG transport stream of the kind often produced by PVRs). When these three files are played back under Windows 7, the mpg and ts files play smoothly, but the dvr-ms file stutters. The last piece of data I have is that two other Windows 7 machines can play back dvr-ms files smoothly with no stuttering. One is a netbook, with less grunt than the media centre. So there must be something specific about my Media Center machine that's causing the problem. Does anyone have any idea where I can look now? I don't know much about AV software, codecs, filter graphs etc. but I suspect that's where the problem lies. Rendering the video isn't the problem, but extracting the streams is. How would I go about diagnosing the problem? Edited to add: I just used the GraphStudio tool to look at the filter graph on the offending PC. The filter graph it uses by default for dvr-ms looks identical to the other machines, and, interestingly, when I play the files using GraphStudio they run smoothly. Under Windows Media Player and Windows Media Center they stutter. I'd like to see the filter graph for WMP but GraphStudio won't show it. It looks like WMP and WMC are using a different decoding path to GraphStudio. Edited again to add: Today I purchased a new HDTV. The same Media Center driving the TV at 1080p is now playing back the old Recorded TV files smoothly, without stuttering. So whatever the cause of the original problem, using a different resolution seems to have removed the problem. It might also explain why nobody else has had this problem. I doubt many people use Media Centre with a 14in portable TV.

    Read the article

  • Getting macro keys from a razer blackwidow to work on linux

    - by Journeyman Geek
    I picked up a razer blackwidow ultimate that has additional keys meant for macros that are set using a tool that's installed on windows. I'm assuming that these arn't some fancypants joojoo keys and should emit scancodes like any other keys. Firstly is there a standard way to check these scancodes in linux? Secondly how do i set these keys to do things in command line and x based linux setups? My current linux install is xubuntu 10.10, but i'll be switching to kubuntu once i have a few things fixed up. Ideally the answer should be generic and system-wide Things i have tried so far: showkeys from the built in kbd package (in a seperate vt) - macro keys not detected xev - macro keys not detected lsusb and evdev output this ahk script's output suggests the M keys are not outputting standard scancodes Things i need to try snoopy pro + reverse engineering (oh dear) Wireshark - preliminary futzing around seems to indicate no scancodes emitted when what i seem to think is the keyboard is monitored and keys pressed. Might indicate additional keys are a seperate device or need to be initialised somehow. Need to cross reference that with lsusb output from linux, in 3 scenarios - standalone, passed through to a windows VM without the drivers installed, and the same with. LSUSB only detects one device on a standalone linux install It might be useful to check if the mice use the same razer synapse driver , since that means some variation of razercfg might work (not detected. only seems to work for mice) Things i have Have worked out: In a windows system with the driver, the keyboard is seen as a keyboard and a pointing device. And said pointing device uses, in addition to your bog standard mouse drivers.. a driver for something called a razer synapse. Mouse driver seen in linux under evdev and lsusb as well Single Device under OS X apparently, though i have yet to try lsusb equivilent on that Keyboard goes into pulsing backlight mode in OS X upon initialisation with the driver. This should probably indicate that there's some initialisation sequence sent to the keyboard on activation. They are, in fact, fancypants joojoo keys. Extending this question a little I have access to a windows system so if i need to use any tools on that to help answer the question, its fine. I can also try it on systems with and without the config utility. The expected end result is still to make those keys usable on linux however. I also realise this is a very specific family of hardware. I would be willing to test anything that makes sense on a linux system if i have detailed instructions - this should open up the question to people who have linux skills, but no access to this keyboard The minimum end result i require I need these keys detected, and usable in any fashion on any of the current graphical mainstream ubuntu varients

    Read the article

  • postfix cannot getting my domain name?

    - by Kossel
    Hi I'm trying to setup webmin+postfix+dovecot+roundcube, for this moment I want things be as simple as possible so I'm using linux users as email accounts. I can send/receive from the same domain, I mean [email protected] can send/receive to/from [email protected] I tested smtp/imap with outlook and says no problem. if I send a mail from gmail it reject with error of: Technical details of temporary failure: The recipient server did not accept our requests to connect. when I login with roundcube the email address display in the right corner is something like user1@com and I get this error message from logs: [11-Nov-2012 07:39:03 +0400]: IMAP Error: Login failed for user1 from 187.150.xx.xx. Could not connect to com:143: php_network_getaddresses: getaddrinfo failed: Name or service not known in /var/www/webmail/program/include/rcube_imap.php on line 191 (POST /webmail/?_task=login&_action=login) it says Could not connect to com:143 looks like it cannot read the domain name. I used http://mxtoolbox.com/ to check the mx record and it says it can find the server of mail.mydomain.com. I quit sure the problema is from postfix or my server configs, but I have been looking for every config file and cannot find the answer of this. any suggestion I will appreciate. here are some of my configs (I don't want to make this question too long, I can provide any other information to solve this question): postfix main.cf #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # TLS parameters smtpd_tls_cert_file = /etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file = /etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_sasl_security_options = noanonymous smtpd_sasl_auth_enable = yes smtpd_sasl_type = dovecot smtpd_sasl_path = private/auth # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. mydomain = mydomain.com myhostname = mail.mydomain.com alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases mydestination = $mydomain, $myhostname mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mailbox_command = procmail -a "$EXTENSION" mailbox_size_limit = 0 recipient_delimiter = + virtual_alias_domains = mydomain.com smtpd_recipient_restrictions = permit_mynetworks reject_unauth_destination permit_sasl_authenticated myorigin = $mydomain roundcube conf // ---------------------------------- // IMAP // ---------------------------------- $rcmail_config['default_host'] = '%d'; $rcmail_config['default_port'] = 143; $rcmail_config['imap_auth_type'] = null; $rcmail_config['imap_delimiter'] = null; $rcmail_config['imap_ns_personal'] = null; $rcmail_config['imap_ns_other'] = null; $rcmail_config['imap_ns_shared'] = null; $rcmail_config['imap_force_caps'] = false; $rcmail_config['imap_force_lsub'] = false; $rcmail_config['imap_force_ns'] = false; $rcmail_config['imap_timeout'] = 0; $rcmail_config['imap_auth_cid'] = null; $rcmail_config['imap_auth_pw'] = null; $rcmail_config['imap_cache'] = null; $rcmail_config['messages_cache'] = false;

    Read the article

  • Installing drivers for switchable graphics

    - by Anonymous
    I recently bought a laptop that came with Windows 7 64-bit installed. I have some older (16-bit and 32-bit) software that doesn't work with 64-bit Windows, but works just fine with 32-bit. Since I also wanted to get rid of all of the pre-installed spam, I decided to wipe the hard drive and install a fresh copy of Windows 7 32-bit. I can't get the graphics cards working. This laptop uses switchable graphics, an Intel card and a Radeon card. I first tried installing this driver from Intel, which works for the Intel card. Of course, the Radeon card doesn't work with this driver and I need it for some of the newer games I have. I also tried this driver. Windows's device manager will recognize the Radeon card, but it will still use the Intel card. Also, even though that package says it contains the Intel driver, the Intel card still isn't properly recognized by Windows (leaving me with a nasty 800x600 resolution). On top of that, the Catalyst Control Center won't open (saying "The Catalyst Control Center is not supported by the driver version of your enabled graphics adapter") I tried installing HP's driver then installing Intel's driver on top of it. Device manager will then recognize both graphics cards properly. However, the laptop still uses the Intel card. The CCC still won't start (saying the same thing as before) and I can't find any of 'switching' graphics cards. Before formatting, I could right-click the desktop and click "Configure Switchable Graphics" This option hasn't been in the context menu regardless of what driver(s) I've installed. After some research, I found out that this menu entry runs the command "cli.exe Start PowerXpressHybrid" I've tried manually running this command, but I get the same unsupported message from CCC. So, does anyone know how I can get this working? I would like to be able to switch between the Intel and Radeon. But, if there's some way to disable the Intel and use only the Radeon, that would be fine I dual-boot with Linux (framebuffer uses the Intel, haven't even tried getting X set up yet) Here's the output of lspci # lspci -v | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller]) 01:00.0 VGA compatible controller: ATI Technologies Inc NI Seymour [AMD Radeon HD 6470M] (prog-if 00 [VGA controller]) The laptop is a HP Pavilion g6t-1d00. HP doesn't support installing anything but Windows 7 64-bit, so calling tech support isn't an option. Thanks for any help UPDATE: I finally got it working. After a fresh install of Windows 7, I installed the HP driver (the one linked above). Then, there's an optional Windows update I installed (don't remember the exact name, but it'll stick out). After that, graphics switching works just like it's supposed to. Moab, thanks anyways for your help

    Read the article

  • Windows Question: RunOnce/Second Boot Issues

    - by Greg
    I am attempting to create a Windows XP SP3 image that will run my application on Second Boot. Here is the intended workflow. 1) Run Image Prep Utility (I wrote) on windows to add my runonce entries and clean a few things up. 2) Reboot to ghost, make image file. 3) Package into my ISO and distribute. 4) System will be imaged by user. 5) On first boot, I have about 5 things that run, one of which includes a driver updater (I wrote) for my own specific devices. 6) One of the entries inside of HKCU/../runonce is a reg file, which adds another key to HKLM/../runonce. This is how second boot is acquired. 7) As a result of the driver updater, user is prompted to reboot. 8) My application is then launched from HKLM/../runonce on second boot. This workflow works perfectly, except for a select few legacy systems that contain devices that cause the add hardware wizard to pop up. When the add hardware wizard pops up is when I begin to see problems. It's important to note, that if I manually inspect the registry after the add hardware wizard pops up, it appears as I would expect, with all the first boot scripts having run, and it's sitting in a state I would correctly expect it to be in for a second boot scenario. The problem comes when I click next on the add hardware wizard, it seems to re-run the single entry I've added, and re-executes the runonce scripts. (only one script now as it's already executed and cleared out the initial entries). This causes my application to open as if it were a second boot, only when next is clicked on the add hardware wizard. If I click cancel, and reboot, then it also works as expected. I don't care as much about other solutions, because I could design a system that doesn't fully rely on Microsoft's registry. I simply can't find any information as to WHY this is happening. I believe this is some type of Microsoft issue that's presenting itself as a result of an overstretched image that's expected to support too many legacy platforms, but any help that can be provided would be appreciated. Thanks,

    Read the article

  • vagrant up command very slow on OS X Lion

    - by Andy Hume
    When I run vagrant up to provision a new VM on Lion it takes an extremely long time, during which the entire Mac is very laggy and unresponsive. The output is as follows, the key point being the "notice: Finished catalog run in 754.28 seconds" > vagrant up [default] Importing base box 'lucid64'... [default] The guest additions on this VM do not match the install version of VirtualBox! This may cause things such as forwarded ports, shared folders, and more to not work properly. If any of those things fail on this machine, please update the guest additions and repackage the box. Guest Additions Version: 4.1.0 VirtualBox Version: 4.1.6 [default] Matching MAC address for NAT networking... [default] Clearing any previously set forwarded ports... [default] Forwarding ports... [default] -- ssh: 22 => 2222 (adapter 1) [default] -- web: 80 => 4567 (adapter 1) [default] Creating shared folders metadata... [default] Running any VM customizations... [default] Booting VM... [default] Waiting for VM to boot. This can take a few minutes. [default] VM booted and ready for use! [default] Mounting shared folders... [default] -- v-root: /vagrant [default] -- v-data: /var/www [default] -- manifests: /tmp/vagrant-puppet/manifests [default] Running provisioner: Vagrant::Provisioners::Puppet... [default] Running Puppet with lucid64.pp... [default] stdin: is not a tty [default] notice: /Stage[main]/Lucid64/Exec[apt-update]/returns: executed successfully [default] [default] notice: /Stage[main]/Lucid64/Package[apache2]/ensure: ensure changed 'purged' to 'present' [default] [default] notice: /Stage[main]/Lucid64/File[/etc/motd]/ensure: defined content as '{md5}a25e31ba9b8489da9cd5751c447a1741' [default] [default] notice: Finished catalog run in 754.28 seconds [default] [default] err: /File[/var/lib/puppet/rrd]/ensure: change from absent to directory failed: Could not find group puppet [default] [default] err: Could not send report: Got 1 failure(s) while initializing: change from absent to directory failed: Could not find group puppet [default] [default] Running provisioner: Vagrant::Provisioners::Puppet... [default] Running Puppet with lucid64.pp... [default] stdin: is not a tty [default] notice: /Stage[main]/Lucid64/Exec[apt-update]/returns: executed successfully [default] [default] notice: Finished catalog run in 2.05 seconds [default] [default] err: /File[/var/lib/puppet/rrd]: Could not evaluate: Could not find group puppet [default] [default] err: Could not send report: Got 1 failure(s) while initializing: Could not evaluate: Could not find group puppet [default] [default] Running provisioner: Vagrant::Provisioners::Puppet... [default] Running Puppet with lucid64.pp... [default] stdin: is not a tty [default] notice: /Stage[main]/Lucid64/Exec[apt-update]/returns: executed successfully [default] [default] notice: Finished catalog run in 1.36 seconds [default] [default] err: /File[/var/lib/puppet/rrd]: Could not evaluate: Could not find group puppet [default] [default] err: Could not send report: Got 1 failure(s) while initializing: Could not evaluate: Could not find group puppet [default] >

    Read the article

  • Can't get Passwordless (SSH provided) SFTP working

    - by Shoaibi
    I have chrooted sftp setup as below. # Package generated configuration file # See the sshd_config(5) manpage for details # What ports, IPs and protocols we listen for Port 22 # Use these options to restrict which interfaces/protocols sshd will bind to #ListenAddress :: #ListenAddress 0.0.0.0 Protocol 2 # HostKeys for protocol version 2 HostKey /etc/ssh/ssh_host_rsa_key HostKey /etc/ssh/ssh_host_dsa_key #Privilege Separation is turned on for security UsePrivilegeSeparation yes # Lifetime and size of ephemeral version 1 server key KeyRegenerationInterval 3600 ServerKeyBits 768 # Logging SyslogFacility AUTH LogLevel INFO # Authentication: LoginGraceTime 120 PermitRootLogin without-password StrictModes yes AllowGroups admins clients RSAAuthentication yes PubkeyAuthentication yes #AuthorizedKeysFile %h/.ssh/authorized_keys # Don't read the user's ~/.rhosts and ~/.shosts files IgnoreRhosts yes # For this to work you will also need host keys in /etc/ssh_known_hosts RhostsRSAAuthentication no # similar for protocol version 2 HostbasedAuthentication no # Uncomment if you don't trust ~/.ssh/known_hosts for RhostsRSAAuthentication #IgnoreUserKnownHosts yes # To enable empty passwords, change to yes (NOT RECOMMENDED) PermitEmptyPasswords no # Change to yes to enable challenge-response passwords (beware issues with # some PAM modules and threads) ChallengeResponseAuthentication no # Change to no to disable tunnelled clear text passwords #PasswordAuthentication yes # Kerberos options #KerberosAuthentication no #KerberosGetAFSToken no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes # GSSAPI options #GSSAPIAuthentication no #GSSAPICleanupCredentials yes X11Forwarding yes X11DisplayOffset 10 PrintMotd no PrintLastLog yes TCPKeepAlive yes #UseLogin no #MaxStartups 10:30:60 #Banner /etc/issue.net # Allow client to pass locale environment variables AcceptEnv LANG LC_* #Subsystem sftp /usr/lib/openssh/sftp-server # Set this to 'yes' to enable PAM authentication, account processing, # and session processing. If this is enabled, PAM authentication will # be allowed through the ChallengeResponseAuthentication and # PasswordAuthentication. Depending on your PAM configuration, # PAM authentication via ChallengeResponseAuthentication may bypass # the setting of "PermitRootLogin without-password". # If you just want the PAM account and session checks to run without # PAM authentication, then enable this but set PasswordAuthentication # and ChallengeResponseAuthentication to 'no'. UsePAM yes Subsystem sftp internal-sftp Match group clients ChrootDirectory /var/chroot-home X11Forwarding no AllowTcpForwarding no ForceCommand internal-sftp a dummy user root:~# tail -n1 /etc/passwd david:x:1000:1001::/david:/bin/sh Now in this case david can sftp using say filezilla client and he is chrooted to /var/chroot-home/david/. But what if i was to setup a passwordless auth? I have tried pasting his key in /var/chroot-home/david/.ssh/authorized_keys but no use, tried ssh'ing as david to the box and it just stops at "debug1: Sending env LC_CTYPE = C" after i supply it password and there is nothing shown in auth.log, may be because it can't find the homedir. If i do "su - david" as root i see "No directory, logging in with HOME=/" which makes sense. Symlink doesn't help either. I have also tried with: Match group clients ChrootDirectory /var/chroot-home/%u X11Forwarding no AllowTcpForwarding no ForceCommand internal-sftp a dummy user root:~# tail -n1 /etc/passwd david:x:1000:1001::/var/chroot-home/david:/bin/sh This way if i don't change /var/chroot-home/david to root:root sshd complains about bad ownership or permission modes, and if i do, david can no longer upload/delete anything directly in his home while using sftp from filezilla.

    Read the article

  • can not connect through SCP, but SSH connections works

    - by Joe Cabezas
    i am trying to connect to my server to transfer file using scp: $ scp -v -r -P <port> <user>@<host>:~/dir/ dir/ this is the output: OpenSSH_5.2p1, OpenSSL 0.9.8r 8 Feb 2011 debug1: Reading configuration data /Users/joe/.ssh/config debug1: Reading configuration data /etc/ssh_config debug1: Connecting to <host> [<host>] port <port>. debug1: Connection established. debug1: identity file /Users/joe/.ssh/identity type -1 debug1: identity file /Users/joe/.ssh/id_rsa type -1 debug1: identity file /Users/joe/.ssh/id_dsa type -1 ssh_exchange_identification: Connection closed by remote host but connecting via SSH works fine: $ ssh <user>@<host> -p <port> <user>@<host>'s password: <user>@<host>:~$ OK what can be wrong with this? my /etc/ssh/sshd_config file on the host is: # Package generated configuration file # See the sshd_config(5) manpage for details # What ports, IPs and protocols we listen for Port <port> # Use these options to restrict which interfaces/protocols sshd will bind to #ListenAddress :: #ListenAddress 0.0.0.0 Protocol 2 # HostKeys for protocol version 2 HostKey /etc/ssh/ssh_host_rsa_key HostKey /etc/ssh/ssh_host_dsa_key HostKey /etc/ssh/ssh_host_ecdsa_key #Privilege Separation is turned on for security UsePrivilegeSeparation yes # Lifetime and size of ephemeral version 1 server key KeyRegenerationInterval 3600 ServerKeyBits 768 # Logging SyslogFacility AUTH LogLevel INFO # Authentication: LoginGraceTime 120 PermitRootLogin yes StrictModes yes RSAAuthentication yes PubkeyAuthentication no #AuthorizedKeysFile %h/.ssh/authorized_keys # Don't read the user's ~/.rhosts and ~/.shosts files IgnoreRhosts yes # For this to work you will also need host keys in /etc/ssh_known_hosts RhostsRSAAuthentication no # similar for protocol version 2 HostbasedAuthentication no # Uncomment if you don't trust ~/.ssh/known_hosts for RhostsRSAAuthentication #IgnoreUserKnownHosts yes # To enable empty passwords, change to yes (NOT RECOMMENDED) PermitEmptyPasswords no # Change to yes to enable challenge-response passwords (beware issues with # some PAM modules and threads) ChallengeResponseAuthentication no # Change to no to disable tunnelled clear text passwords #PasswordAuthentication yes # Kerberos options #KerberosAuthentication no #KerberosGetAFSToken no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes # GSSAPI options #GSSAPIAuthentication no #GSSAPICleanupCredentials yes X11Forwarding yes X11DisplayOffset 10 PrintMotd no PrintLastLog yes TCPKeepAlive yes #UseLogin no #MaxStartups 10:30:60 #Banner /etc/issue.net # Allow client to pass locale environment variables AcceptEnv LANG LC_* Subsystem sftp /usr/lib/openssh/sftp-server # Set this to 'yes' to enable PAM authentication, account processing, # and session processing. If this is enabled, PAM authentication will # be allowed through the ChallengeResponseAuthentication and # PasswordAuthentication. Depending on your PAM configuration, # PAM authentication via ChallengeResponseAuthentication may bypass # the setting of "PermitRootLogin without-password". # If you just want the PAM account and session checks to run without # PAM authentication, then enable this but set PasswordAuthentication # and ChallengeResponseAuthentication to 'no'. UsePAM yes

    Read the article

  • Virtual Network Interface and NAT disables localhost access for MySQL and Apache

    - by Interarticle
    I'm running an Ubuntu Server 12.04, and recently I configured it to do NAT for my laptop. Since the server has only one NIC, I followed instructions online to create a virtual network device (eth0:0) that has a LAN IP address, then further configured iptables and UFW to allow internet sharing. However, just a few days ago, I discovered that one of the PHP pages hosted on the server failed for no apparent reason. A little digging revealed that the MySQL server started refusing connections from localhost. The same happened with a page (PhpMyAdmin) that was configured to be accessible only from localhost (in Apache2). The error, as shown by $mysql --protocol=tcp -u root -p looks like ERROR 1130 (HY000): Host '<host name of eth0>' is not allowed to connect to this MySQL server However, the funny thing is, I configured the mysql server to allow root access from localhost (only). Moreover, the mysql server listens only on 127.0.0.1:3306, as shown by: sudo netstat -npa | head Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 127.0.0.1:3306 0.0.0.0:* LISTEN 1029/mysqld which means that the connection could have only come from 127.0.0.1 (Note that MySQL is working because I can still connect to it via unix domain sockets) In effect, it seems that all tcp connections originating from 127.0.0.1 to 127.0.0.1 appear to any local daemon to come from the eth0 IP address. Indeed, apache2 allowed me to access PhpMyAdmin after I added allow <eth0 IP address>. The following are my network configurations (redacted): /etc/hosts: 127.0.0.1 localhost 211.x.x.x <host name of eth0> <server name> #IPv6 Defaults follows .... /etc/network/interfaces: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 211.x.x.x netmask 255.255.255.0 gateway 211.x.x.x dns-nameservers 8.8.8.8 # dns-* options are implemented by the resolvconf package, if installed dns-search xxxxxxx.com hwaddress ether xx:xx:xx:xx:xx:xx auto eth0:0 iface eth0:0 inet static address 192.168.57.254 netmask 255.255.254.0 broadcast 192.168.57.255 network 192.168.57.0 /etc/ufw/sysctl.conf: #Uncommented the following lines net/ipv4/ip_forward=1 net/ipv6/conf/default/forwarding=1 /etc/default/ufw: DEFAULT_FORWARD_POLICY="ACCEPT" #Changed DROP to ACCEPT /etc/init/internet-sharing.conf (upstart script I wrote), section pre-start script: iptables -A FORWARD -o eth0 -i eth0:0 -s 192.168.57.22 -m conntrack --ctstate NEW -j ACCEPT iptables -A FORWARD -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT iptables -A POSTROUTING -t nat -j MASQUERADE Note again that my problem here is that programs cannot access localhost tcp services, from the server itself, and that access is blocked because the services have access control allowing only 127.0.0.1. I have no problem connecting (as in TCP connections) to services via tcp, even if the services listen only on 127.0.0.1. I do NOT want to connect to the services from another computer.

    Read the article

  • What is a good method to solve cabal install problems?

    - by sp3ctum
    I've used the cabal package manager for Haskell programs to install libraries and new projects that I've cloned from some repositories. More often than not, I keep running into problems. Most projects make installing them seem super easy, but in my case that's not always true - sometimes they are very hard to get running. Some are so hard, in fact, that I've lost interest in the project solely because of not being able to install it. So instead of complaining, I'd like to ask what I should do to better this situation. I'd like to use my most recent problem as an example. I'm interested in trying out the Gitit project. It's a promising looking personal wiki that runs on various version control systems. So here's what I've done: Clone from Github run cabal install in the project directory like I'm told on the project install page: mika@eka:~/git/gitit$ ls BLUETRIP-LICENSE CHANGES HCAR-gitit.tex LICENSE Network README.markdown RELANN-0.6.1 Setup.lhs TANGOICONS YUI-LICENSE data expireGititCache.hs gitit.cabal gitit.hs plugins mika@eka:~/git/gitit$ cabal install Resolving dependencies... cabal: cannot configure happstack-server-7.0.7. It requires base64-bytestring ==1.0.* For the dependency on base64-bytestring ==1.0.* there are these packages: base64-bytestring-1.0.0.0. However none of them are available. base64-bytestring-1.0.0.0 was excluded because gitit-0.10 requires base64-bytestring ==0.1.* mika@eka:~/git/gitit$ So now I'm thinking: well, I'll install happstack-server on its own, maybe that will work: mika@eka:~/git/gitit$ cabal install happstack-server Resolving dependencies... Warning: happstack-server.cabal: Ignoring unknown section type: test-suite Configuring happstack-server-7.0.7... cabal: At least the following dependencies are missing: blaze-html ==0.5.*, hslogger >=1.0.2, monad-control ==0.3.*, network >=2.2.3, sendfile >=0.7.1 && <0.8, system-filepath >=0.3.1, text >=0.10 && <0.12, threads >=0.5, transformers-base ==0.4.* cabal: Error: some packages failed to install: happstack-server-7.0.7 failed during the configure step. The exception was: ExitFailure 1 So looks like there are some dependencies missing. But isn't installing these dependencies the whole point of using cabal in the first place? What should I do? File bug reports (to which project?), install the dependencies manually or something else? Bonus points for explaining what causes these kinds of problems.

    Read the article

  • Supervisord appears to be running, but monitored programs aren't launched

    - by Brad Montgomery
    I've got supervisord 3.0a8 installed from the system package on ubuntu 10.04 (64bit). The supervisor service appears to be running, but it's not launching the configured programs. Interestingly enough, this exact configuration is running on another system, and is working as expected. The main config file looks like this: ; /etc/supervisor/supervisord.conf [unix_http_server] chmod=0700 file=/var/run/supervisor.sock [supervisord] logfile=/var/log/supervisor/supervisord.log childlogdir=/var/log/supervisor pidfile=/var/run/supervisord.pid [rpcinterface:supervisor] supervisor.rpcinterface_factory = supervisor.rpcinterface:make_main_rpcinterface [supervisorctl] serverurl=unix:///var/run/supervisor.sock [include] files = /etc/supervisor/conf.d/*.conf A sample program config looks like this: ; /etc/supervisor/conf.d/sample.conf [program:sample] directory=/opt/sample command=/opt/sample/run.sh Where, the /opt/sample/run.sh is: #!/bin/bash while true; do T=`date` echo "[$T] Running!" >> /var/log/sample.log sleep 1 done And, here's some additional information regarding the running instance of supervisord: root@myhost:~# supervisorctl version 3.0a8 root@myhost:~# which supervisorctl /usr/bin/supervisorctl root@myhost:~# which supervisord /usr/bin/supervisord root@myhost:~# supervisorctl status # NOTE that there's no output! root@myhost:~# supervisorctl avail root@myhost:~# service supervisor status is running root@myhost:~# ps aux | grep supervisor root 21740 0.1 0.4 40772 10056 ? Ss 11:28 0:00 /usr/bin/python /usr/bin/supervisord root 21749 0.0 0.0 7624 932 pts/2 S+ 11:28 0:00 grep --color=auto supervisor root@myhost:~# cat /var/log/supervisor/supervisord.log 2012-04-26 11:28:22,483 CRIT Supervisor running as root (no user in config file) 2012-04-26 11:28:22,536 INFO RPC interface 'supervisor' initialized 2012-04-26 11:28:22,536 WARN cElementTree not installed, using slower XML parser for XML-RPC 2012-04-26 11:28:22,536 CRIT Server 'unix_http_server' running without any HTTP authentication checking 2012-04-26 11:28:22,539 INFO daemonizing the supervisord process 2012-04-26 11:28:22,539 INFO supervisord started with pid 21740 root@myhost:~# ll /etc/supervisor/conf.d/ total 28 drwxr-xr-x 2 root root 4096 2012-04-26 11:31 ./ drwxr-xr-x 3 root root 4096 2012-04-25 18:38 ../ -rw-r--r-- 1 root root 66 2012-04-26 11:31 sample.conf root@myhost:~# ll /opt/sample/ total 12 drwxr-xr-x 2 root root 4096 2012-04-26 11:32 ./ drwxr-xr-x 4 root root 4096 2012-04-26 11:31 ../ -rwxr-xr-x 1 root root 97 2012-04-26 11:32 run.sh* root@myhost:~# python Python 2.6.5 (r265:79063, Apr 16 2010, 13:57:41) [GCC 4.4.3] on linux2 Type "help", "copyright", "credits" or "license" for more information. >>> Any help is greatly appreciated!

    Read the article

  • Downloading Python 2.5.4 (from official website) in order to install it

    - by brilliant
    I was quite hesitant about whether I should post this question here on "StackOverflow" or on "SuperUser", but finally decided to post it here as Python is more a programming language rather than a piece of software. I've been recently using Python 2.5.4 that is installed on my computer, but at the moment I am not at home (and won't be for about two weeks from now), so I need to install the same version of Python on another computer. This computer has Windows XP installed – just like the one that I have at home. The reason why I need Python 2.5.4 is because I am using “Google App Engine”, and I was told that it only supports Python 2.5 However, when I went to the official Python page for the download, I discovered that certain things have changed, and I don’t quite remember where exactly from that site I had downloaded Python 2.5.4 on my computer at home. I found this page: http://www.python.org/download/releases/2.5.4/ Here is how it looks: (If you can’t see it here, please check it out at this address: http://brad.cwahi.net/some_pictures/python_page.jpg ) A few things here are not clear to me. It says: For x86 processors: python-2.5.4.msi For Win64-Itanium users: python-2.5.4.ia64.msi For Win64-AMD64 users: python-2.5.4.amd64.msi First of all, I don’t know what processor I am using – whether mine is “x86” or not; and also, I don’t know whether I am an “Win64-Itanium” or an “Win64-AMD64” user. Are Itanium and AMD64 also processors? Later it says: Windows XP and later already have MSI; many older machines will already have MSI installed. I guess, it is my case, but then I am totally puzzled as to which link I should click as it seems now that I don’t need those three previous links (as MSI is already installed on Windows XP), but there is no fourth link provided for those who use “Windows XP” or older machines. Of course, there are these words after that: Windows users may also be interested in Mark Hammond's win32all package, available from Sourceforge. but it seems to me that it is something additional rather than the main file. So, my question is simple: Where in the official Python website I can download Python 2.5.4, precisely, which link I should click?

    Read the article

  • Uninstall php and nginx or fix setup

    - by jreed121
    First off, I'm a huge linux noob - sorry... I'm trying to setup nginx with php-fpm on debian and I'm pretty sure that I've completely screwed it up. nginx seems to be running fine because I can it it from a web browser and it load the stock "Welcome to nginx!" page. I'm not so sure about php-fpm though. When I try something like # restart php-fpm I get: bash: restart: command not found First off php-fpm some how got installed as php5-fpm when I do root@server:/etc/init.d# ls, which seems to contradict every tutorial and help doc I've read (supposed to be 'php-fpm'). I can restart it with this: service php5-fpm restart And just enter the package name 'php5-fpm' I get this: root@server:~# php5-fpm [17-Nov-2012 23:15:36] NOTICE: PHP message: PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php5/20100525/suhosin.so' - /usr/lib/php5/20100525/suhosin.so: cannot open shared object file: No such file or directory in Unknown on line 0 [17-Nov-2012 23:15:36] ERROR: An another FPM instance seems to already listen on /var/run/php5-fpm.sock [17-Nov-2012 23:15:36] ERROR: FPM initialization failed The root for nginx is /usr/share/nginx/html, when I try to navigate to a .php file in there with my web browser, it tries to download the file instead of interpret it. I would like this folder to be in my user's home directory ie: /home/administrator/www or /home/nginx/www. I know in order to do this I need to modify nginx.conf, but I find that configuration file difficult to understand. I suppose the fact that my .php scripts aren't being handled is my bigger problem anyways. When I try to see what running on port 9000 (php-fpm default port) with lsof -i :9000 it returns nothing - I guess indicating that it isn't listening. then I head over to vim /etc/php5/fpm/php-fpm.conf and there is no where to designate a port number. So should I just uninstall everything and start from scratch? If so, how do I clean it all up? Any suggestions for a tutorial once I'm ready to try again? Should I attempt to troubleshoot this mess? If so where should I start? Sorry guys, I'm feeling pretty stupid and lost right now. I'm not sure what my next steps are in trying to resolve this issue are. I realize that this is a horrible question for this type of Q&A site, but I'd really appreciate any guidance.

    Read the article

< Previous Page | 319 320 321 322 323 324 325 326 327 328 329 330  | Next Page >