Search Results

Search found 15264 results on 611 pages for 'recovery model'.

Page 323/611 | < Previous Page | 319 320 321 322 323 324 325 326 327 328 329 330  | Next Page >

• HW RAID 1 different disk sizes?

  - by jacka

  I was told by an HP support guy that I should not replace a failed drive in a mirror with a bigger size drive, since it could crash my array. I am puzzled why is this so and how to hell am I suppose to support this array once the specific hdd model is not available any more?

  Read the article

• fd partitions gone from 2 discs, md happy with it and resyncs. How to recover ?

  - by d0nd

  Hey gurus, need some help badly with this one. I run a server with a 6Tb md raid5 volume built over 7*1Tb disks. I've had to shut down the server lately and when it went back up, 2 out of the 7 disks used for the raid volume had lost its conf : dmesg : [ 10.184167] sda: sda1 sda2 sda3 // System disk [ 10.202072] sdb: sdb1 [ 10.210073] sdc: sdc1 [ 10.222073] sdd: sdd1 [ 10.229330] sde: sde1 [ 10.239449] sdf: sdf1 [ 11.099896] sdg: unknown partition table [ 11.255641] sdh: unknown partition table All 7 disks have same geometry and were configured alike : dmesg : Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x1e7481a5 Device Boot Start End Blocks Id System /dev/sdb1 1 121601 976760001 fd Linux raid autodetect All 7 disks (sdb1, sdc1, sdd1, sde1, sdf1, sdg1, sdh1) were used in a md raid5 xfs volume. When booting, md, which was (obviously) out of sync kicked in and automatically started rebuilding over the 7 disks, including the two "faulty" ones; xfs tried to do some shenanigans as well: dmesg : [ 19.566941] md: md0 stopped. [ 19.817038] md: bind<sdc1> [ 19.817339] md: bind<sdd1> [ 19.817465] md: bind<sde1> [ 19.817739] md: bind<sdf1> [ 19.817917] md: bind<sdh> [ 19.818079] md: bind<sdg> [ 19.818198] md: bind<sdb1> [ 19.818248] md: md0: raid array is not clean -- starting background reconstruction [ 19.825259] raid5: device sdb1 operational as raid disk 0 [ 19.825261] raid5: device sdg operational as raid disk 6 [ 19.825262] raid5: device sdh operational as raid disk 5 [ 19.825264] raid5: device sdf1 operational as raid disk 4 [ 19.825265] raid5: device sde1 operational as raid disk 3 [ 19.825267] raid5: device sdd1 operational as raid disk 2 [ 19.825268] raid5: device sdc1 operational as raid disk 1 [ 19.825665] raid5: allocated 7334kB for md0 [ 19.825667] raid5: raid level 5 set md0 active with 7 out of 7 devices, algorithm 2 [ 19.825669] RAID5 conf printout: [ 19.825670] --- rd:7 wd:7 [ 19.825671] disk 0, o:1, dev:sdb1 [ 19.825672] disk 1, o:1, dev:sdc1 [ 19.825673] disk 2, o:1, dev:sdd1 [ 19.825675] disk 3, o:1, dev:sde1 [ 19.825676] disk 4, o:1, dev:sdf1 [ 19.825677] disk 5, o:1, dev:sdh [ 19.825679] disk 6, o:1, dev:sdg [ 19.899787] PM: Starting manual resume from disk [ 28.663228] Filesystem "md0": Disabling barriers, not supported by the underlying device [ 28.663228] XFS mounting filesystem md0 [ 28.884433] md: resync of RAID array md0 [ 28.884433] md: minimum _guaranteed_ speed: 1000 KB/sec/disk. [ 28.884433] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync. [ 28.884433] md: using 128k window, over a total of 976759936 blocks. [ 29.025980] Starting XFS recovery on filesystem: md0 (logdev: internal) [ 32.680486] XFS: xlog_recover_process_data: bad clientid [ 32.680495] XFS: log mount/recovery failed: error 5 [ 32.682773] XFS: log mount failed I ran fdisk and flagged sdg1 and sdh1 as fd. I tried to reassemble the array but it didnt work: no matter what was in mdadm.conf, it still uses sdg and sdh instead of sdg1 and sdh1. I checked in /dev and I see no sdg1 and and sdh1, shich explains why it wont use it. I just don't know why those partitions are gone from /dev and how to readd those... blkid : /dev/sda1: LABEL="boot" UUID="519790ae-32fe-4c15-a7f6-f1bea8139409" TYPE="ext2" /dev/sda2: TYPE="swap" /dev/sda3: LABEL="root" UUID="91390d23-ed31-4af0-917e-e599457f6155" TYPE="ext3" /dev/sdb1: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sdc1: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sdd1: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sde1: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sdf1: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sdg: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sdh: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" fdisk -l : Disk /dev/sda: 40.0 GB, 40020664320 bytes 255 heads, 63 sectors/track, 4865 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x8c878c87 Device Boot Start End Blocks Id System /dev/sda1 * 1 12 96358+ 83 Linux /dev/sda2 13 134 979965 82 Linux swap / Solaris /dev/sda3 135 4865 38001757+ 83 Linux Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x1e7481a5 Device Boot Start End Blocks Id System /dev/sdb1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xc9bdc1e9 Device Boot Start End Blocks Id System /dev/sdc1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdd: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xcc356c30 Device Boot Start End Blocks Id System /dev/sdd1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sde: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xe87f7a3d Device Boot Start End Blocks Id System /dev/sde1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdf: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xb17a2d22 Device Boot Start End Blocks Id System /dev/sdf1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdg: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x8f3bce61 Device Boot Start End Blocks Id System /dev/sdg1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdh: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xa98062ce Device Boot Start End Blocks Id System /dev/sdh1 1 121601 976760001 fd Linux raid autodetect I really dont know what happened nor how to recover from this mess. Needless to say the 5TB or so worth of data sitting on those disks are very valuable to me... Any idea any one? Did anybody ever experienced a similar situation or know how to recover from it ? Can someone help me? I'm really desperate... :x

  Read the article

• Cloning hard drive -- data, operating system settings, everything

  - by Salman A

  I am using Windows XP. My hard drive (Seagate 160gig Barracuda) is about to fail. Its already developed bad sectors and it seems to get worse everyday. Data transfer mode is down to PIO mode 2, chkdsk runs every now and then, registry and important windows files get corrupted and I spend 30-60 minutes running chkdsk /f /r from the recovery console. I've got a replacement (Seagate 5000gig Barracuda) and now i want to transfer each and every thing on to the new drive. I don't want to go through windows and software installation, I spent ages getting all those software installed and configured on that hard drive. Need advice: whats the best way to transfer everything onto the new drive so that it behaves just like the old one. And are there any "gotchas".

  Read the article

• Virtualised Sharepoint Backup Strategies

  - by dunxd

  I have a Sharepoint (OSS 2007) farm running on three virtual machines in VMWare ESX, plus a SQL Server backend on physical hardware. During a recent Business Continuity Planning event I tried restoring the sharepoint farm with only the config and content databases, and failed to get things working. My plan was to build a new sharepoint server, then attach this to a restoration config database and install the Central Management site on this server, then reattach the content databases. This failed at the Central Management part of the plan. So I am back to the drawing board on the best strategy for backup and recovery, with reducing the time and complexity of the restore job the main objective. I haven't been able to find much in the way of discussion of backup/restore strategies for Sharepoint in a VMWare environment, so I figured I'd see if anyone on server fault has any ideas or experience.

  Read the article

• Can't access a partion that has a virus on it

  - by vaccano

  My wife's computer had a virus alarm go off, so I am looking into it. The virus is supposed to be on the D: drive. I wanted to talk a quick look at the file, but I cannot not. It has one file that I can get to. It is D:\Recovery. That shows a "Protected by PC Angel" graphic. How can I get past this? Should I do it? Is the virus scanner wrong? (I am using Avast).

  Read the article

• Licensing for SQL Server Merge Replication via Web Syncronization

  - by user43330

  I am planning to implement a Sales force automation software where there will be 50 PDA devices having sql server CE 3.5 connecting via web sync merge replication to central SQL Server 2005 main Database via a IIS server. 1) IIS Server Win 2003 Server 2) SQL Server 2005 Standard 3) SQL CE 3.5 having in 50 PDA Devices. How many licenses are required for each Servers ? What is the licencing model

  Read the article

• Vaio Laptop wireless connectivity loss after some minute

  - by Mehran Meidani

  I have a big problem with my laptop, My laptop loss it's connectivity to internet randomly! for Example sometimes it's ok up to 1h but usually the problem occurred after 5 min. When I run these command, i can continue working with internet : ipconfig /release ipconfig /renew If i turn wireless off and on, the problem don't solved I have another laptop (Macbook pro) and it doesn't have any problem I use Linksys E2000 as an wireless access point Model : Sony vaio sa21gx OS : Windows 7 SP1 Thank you for your help and sorry for my bad english :)

  Read the article

• How to setup a Wi-Fi 2-computer network with Internet sharing?

  - by Narek

  I have the following devices: Desktop Computer (Windows XP Professional) Laptop Computer (Windows Vista Home Premium) A USB modem that I want to connect to my Desktop computer (so my Desktop has Internet) And a Wi-Fi router (D-Link, model: DIR-300) that I want to use in order to create a connection between mentioned two computers to be able to share files and what is the most important thing to make my laptop to have access to the Internet. What steps I should do to have this system?

  Read the article

• Can't install Windows 7 on Acer Aspire M1100

  - by r0ca

  When I install Windows 7, everything goes smooth but as soon as it's done and Windows needs to reboot for the last time before getting the desktop, the computer stucks to Verify DMI Pool Data............. and then, nothing. I change the CMOS battery, I tried so many setup in BIOS, even load default settings... Nothing worked. The HDD light is not flickering anymore, no HDD activity. CTRL-ALT-DEL doesn't work. It's just impossible to load Windows 7. I tried Windows XP and this works fine. I also tried the Acer (Futureshop) recovery CD and I get an Hexademical error message stating the install cannot continue. Is there a BIOS flash apps somewhere or a fix I can apply to have Windows 7 Ultimate installed on my computer. Any takers?

  Read the article

• Guaranteeing ACID properties for InnoDB databases.

  - by plinehan

  What steps must one take to ensure that an otherwise defaultly-configured InnoDB server is truly ACID compliant? The InnoDB configuration page mentions that the hardware itself must be configured to honor fsync calls, i.e. disable any write-back caches. This page mentions some other concerns, but may be conflating the binary log and the InnoDB log, and may be a bit out of date regarding default settings for MySQL 5.x. Upon reading the binary log document page it would seem that the "sync_binlog=1" setting is not required for ACID properties in general, only for ACID properties vis a vis point-in-time recovery and replication. So, is disabling write-back disk caching sufficient, or are there other settings that must be tweaked?

  Read the article

• What do the numbers on Western Digital drives mean?

  - by Evan Carroll

  There are numerous numbers on a Western Digital drive, MDL (presumably model, ex WD5000BEKT-00KA9T0) -- not sure what the 99KA9T0 is. WWN (ex 50014EE25AC8C945) DCM (ex HBNTJBBB) LBA (ex 976773168) R/N (ex 77174) Then there are three numbers on the back of the PCB on a sticker White Sticker Left: 2061-771714-002 AC White Sticker Right: XT BD34 T7KQ 8 0002270 White Sticker far-Right: 272 Then there is one number printed on the PCB, REV P1 2060-771714-002 Then there is one number (or three) on the spindle, 71206-T8Y-03 9X0X22MF 32H Does anyone know what these numbers mean?

  Read the article

• activate wireless chip on ubuntu

  - by Charles

  I am currently using ubuntu 10.10 on my laptop , the model of my wireless chip is broadcom BCM4312 802.11b/g LP-PHY . I tried to activate the driver for the chip by clicking menu bar System - Administration - Additional Drivers . and activated Broadcom STA wireless driver. But the laptop can't detect any wireless signal still. Do I have to do any additional work to make the chip work ? Or how can I test if there is physical damage to the chip itself

  Read the article

• Can't use sudo on ubuntu

  - by martin.malek

  After update and reboot I get 'user is not in the sudoers file. This incident will be reported.' when trying to call sudo. The problem is that I don't have a GRUB with revovery option. I try to boot from live cd but I'm not able to access the system partition, only the partition with grub. Can I somehow enable the recovery mode in GRUB? Or boot throw the live CD from first hard drive with some option for that?

  Read the article

• Solaris to Linux conversion: Use VxFS or GFS?

  - by w00t

  We're a Solaris shop looking at RedHat Enterprise Linux and one of the things we're wondering is if we should keep Veritas Volume Manager + FileSystem or go with LVM+ext3 or RedHat's preferred cluster filesystem solution, GFS. One of the things we like about Veritas is that it can use Veritas Volume Replicator to have a remote copy of important filesystems. This functionality seems to be missing from RedHat, DRBD doesn't seem to be packaged in RHEL... So my questions are: Does anybody use VxFS/VxVM/VVR on Linux? Thoughts, experiences? Comparison with LVM+ext3? Anybody using GFS? Thoughts, experiences? Do you do remote replication for disaster recovery, and if so, how? Is there a standard RedHat way?

  Read the article

• How to connect InfoWindow II to 9406-250 console?

  - by Yvan JANSSENS

  How do I connect an InfoWindow II to the 9406-250 console? I recieved an old InfoWindow II (don't know the exact model number yet) from somebody, and want to connect to the console so I can do a manual IPL. I am totaly new to this, and I am still learning how to use everything. Here's the back of the 9406-250 with available connections: https://dl.dropbox.com/u/15854305/connectors.JPG What cabling do I need, and where can I order it?

  Read the article

• Migrate Palm m500 data into MS Office Outlook

  - by Bushman

  I have a rather old Palm m500 PDA that I have been considering replacing with a Blackberry, as it has been slowly starting to fail. I already have decided on which model I want, but the problem is that the information in Palm Desktop 4 (what of it is actually exportable) is in a legacy database format that can't be migrated to MS Office Outlook 2007. Is there a converter that will spit out an Outlook-importable file, or is there a free Windows PIM that happens to support importing/exporting both formats?

  Read the article

• Stability, x86 Vs Sparc

  - by Jason T

  Our project are plan to migrate from Sparc to x86, and our HA requirement is 99.99%, previous on Sparc, we assume the hardware stability would like, hardware failure every 4 month or even one year, and also we have test data for our application, then we have requirement for each unplanned recovery (fail over) to achieve 99.99% (52.6 minutes unplanned downtime per year). But since we are going to use Intel x86, it seems the hardware stability is not so good as Sparc, but we don't have the detail data. So compare with Sparc, how about the stability of the Intel x86, should we assume we have more unplanned downtime? If so, how many, double? Where I can find some more detail of this two type of hardware?

  Read the article

• rc.local is not executed on bootup ubuntu

  - by Alexander

  Im on Ubuntu 10.04. I want to execute script on system boot. I added it to rc.local. If I execute rc.local manually it works fine. If I boot system in recovery mode(2nd string in boot menu) it also works fine. But if I boot normally it is not executed. However i added sleep 20 to my script and there is a pause at the end of boot process, but nothing more is executed. Thanks I think, it soesnt depend on contents of the script but anyway #!/bin/sh -e sleep 20 sudo service ssh start su -c 'service pgsql start' postgres sudo svnserve -d su -c 'hamachi start' root su -c 'hamachi login' root exit 0

  Read the article

• How to force Debian to boot new Kernel?

  - by ThE_-_BliZZarD

  I'm running Debian 6, Debian GNU/Linux, with Linux 2.6.32-5-amd64 under Grub2 ( 1.98+20100804-14+squeeze1) on a remote system (no possibility to view the pre-boot messages). I compiled and installed a new kernel, but I can not get it to boot. What I have done: Installed the packages via: dpkg -i linux-headers-3.5.3.20120914-amd64_3.5.3.20120914-amd64-10.00.Custom_amd64.deb linux-image-3.5.3.20120914-amd64_3.5.3.20120914-amd64-10.00.Custom_amd64.deb This updated the Grub configuration. My /boot/grub/grub.cfg now contains: menuentry 'Debian GNU/Linux, with Linux 3.5.3.20120914-amd64' --class debian --class gnu-linux --class gnu --class os { insmod raid insmod mdraid insmod part_msdos insmod part_msdos insmod ext2 set root='(md0)' search --no-floppy --fs-uuid --set 5a3882a9-c7df-4f6a-9feb-f03e3e37be01 echo 'Loading Linux 3.5.3.20120914-amd64 ...' linux /vmlinuz-3.5.3.20120914-amd64 root=UUID=003242b5-121b-49f3-b32f-1b40aea56eed ro acpi=ht quiet panic=10 echo 'Loading initial ramdisk ...' initrd /initrd.img-3.5.3.20120914-amd64 } menuentry 'Debian GNU/Linux, with Linux 2.6.32-5-amd64' --class debian --class gnu-linux --class gnu --class os { insmod raid insmod mdraid insmod part_msdos insmod part_msdos insmod ext2 set root='(md0)' search --no-floppy --fs-uuid --set 5a3882a9-c7df-4f6a-9feb-f03e3e37be01 echo 'Loading Linux 2.6.32-5-amd64 ...' linux /vmlinuz-2.6.32-5-amd64 root=UUID=003242b5-121b-49f3-b32f-1b40aea56eed ro acpi=ht quiet panic=10 echo 'Loading initial ramdisk ...' initrd /initrd.img-2.6.32-5-amd64 } I used grub-set-default "Debian GNU/Linux, with Linux 2.6.32-5-amd64" to set the old kernel as default and then grub-reboot "Debian GNU/Linux, with Linux 3.5.3.20120914-amd64" to boot into the new kernel once. After update-grub I rebooted the system, but everytime it comes back up with the old kernel (2.6). I tried setting the new one as default (grub-set-default 0, update-grub, reboot) but, still the old one. The Syslogs contain NO hint whatsoever about trying to boot the new kernel - only the old one. Would there be any hints regarding problems with a kernel? Is there a way to enable debug-logging in grub? What am I doing wrong? How can I force the system to boot the new kernel? Edit: Hardware of remote machine. CPU cat /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 16 model : 5 model name : AMD Athlon(tm) II X4 605e Processor stepping : 3 cpu MHz : 2294.898 cache size : 512 KB physical id : 0 siblings : 4 core id : 0 cpu cores : 4 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 5 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt bogomips : 4589.77 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 48 bits physical, 48 bits virtual power management: ts ttp tm stc 100mhzsteps hwpstate (copied only the first, 3 more follow) The server is a Fujitsu PRIMERGY MX130 S1.

  Read the article

• searching for replace broken laptop screen

  - by eran

  hey, i have a laptop with 16'' wide screen, but the screen is broken and i want to buy only the screen and replace it.. my laptop is: HP Pavilion dv6-1050us what i know about the screen is that it's model number 512357-001 "16inch widescreen BrightView BV display panel IMR, with web camera and microphone". I did find some screen which seems to be the one but i'm not sure and dont want to spend money for the wrong screen, can any one help please? thanks, eran

  Read the article

• Problems when trying to connect to a router wirelessly

  - by Ruud Lenders

  The situation - At my girlfriend's parents' place there are six Windows 7 devices that are wired or wireless connected to a router: 3 dekstops and 3 laptops. There are also several smartphones using the router. The router is secured with WPA2 (AES). The problem - We never had any problems with the router for over a year. But recently - about 3 weeks ago - my girlfriend's laptop (HP) and my laptop (ASUS) started to develop problems while trying to connect to the router. The router has stopped showing up from the network list. Sometimes it comes back and shows up, but then it keeps saying something along the lines of "Could not connect", and not long after that it dissapears again. The range of the router is not the problem here, because we experience the same when we sit next to the router. Sometimes, if we are lucky, and waited a long time (10-15 minutes) without using the laptop for anything, the laptop will eventually succesful connect to the router. The attempts - Of course, the Window 7 troubleshooter. We tried troubleshooting the connection problems and the wireless network adapter, but no luck. We also reset the router enough times to know that's not helping either. Here's the full list of things we tried, but did not help: Running the Windows 7 troubleshooter Resetting the router (more than once) Setting the router settings to factory defaults Disconnecting all other devices except one laptop Applying a system restore Trying static/dynamic IP/DNS - Dynamic is better, right? Enabling/disabling IPv6 - Should I keep IPv6 disabled? Running the command: netsh wlan stop hostednetwork Running the command: netsh wlan set hostednetwork mode=disallow Updating/reïnstalling wireless adapter drivers The tests - To help finding the core of the problem, we tested the following: Plugging an ethernet cable in the router and in our laptops - worked fine Connecting someone else's laptop to the router (wireless) - worked fine Connecting our laptops to someone else's router - worked fine The router - This information might be relevant: Router model: Sitecom 300N Wireless Router Router hardware: version 01 The DCHP Server's IPs range from 192.168.0.100 to 192.168.0.200. Router settings: Wireless channel: 12 Channel bandwidth: 20/40 MHz Extension channel: 8 Preamble type: Long 802.11g protection: Disabled UPnP: Enabled The laptops - If you are wondering about our laptops: My laptop model: ASUS Pro64JQ Girlfriend's laptop: HP Pavillion G6 OS: Both Windows 7 Professional x64 - with Service Pack 1 My wireless adapter: Atheros AR9285 AdHoc 11n: Enabled The question - Does anyone have experienced the same problems as I do? Or does someone know how to solve this? Are there more tricks I can try, or settings I should change? Note - Our laptops are not slow or old. My laptop is 1.5 years old, and the other laptop is just 5 months old. I know how to keep laptops clean and I'm pretty sure both laptops are not bloated with useless software.

  Read the article

• Media Player is missing from the list in "Turn Windows features on or off"

  - by arsaKasra

  I decided to reinstall Media Player in Vista [this way], so I figured I should turn it off as a Windows feature. But when I continue with the procedure, I get an incomplete list of features, here's an image: I looked around a bit, wondering if that is only an option available in 7, and I have seen people saying different things. So, is this only available for 7 or is there something wrong going on here? Can I make Media Player to show up in here? I am on a Toshiba Satellite A100 with Vista Home Premium OEM. I don't have my recovery disks or any restore point. Just to mention, I currently do have Media Player and it's working fine. Sorry if I can't think of any more details to add, please ask me for anything I should have included.

  Read the article

• Install Windows 8 64-bit over the top of Windows 8 32-bit

  - by Andrew Gee

  I currently have Windows 8 32-bit installed from MSDN (I didn't realise at the time that my processor supports 64-bit). I understand that you can't upgrade within Windows 32-bit to 64-bit directly from the ISO. I have burned the ISO to a DVD, and have attempted booting from this drive. The problem I am encountering: The operating system couldn't be loaded because a required file is missing or contains errors. File: CI.dll Error code: 0xc0000221 You'll need to use the recovery tools on your installation media. If you don't have any installation media (like a disc or USB device), contact your system administrator or PC manufacturer. Additional info: Computer: HP Pavillion m9280.uk-a Processor: AMD Phenom 9600 Quad-Core RAM: 3 1GB sticks Thanks in advance!

  Read the article

• Fix NTFS partition

  - by stolebe

  Okay, so i was about to resize one of my NTFS partitions but suddenly the partition tool showed me an error and it crashed, so i was no longer able to use my partition - even when i tried mounting it under linux it showed me error. I installed active partition recovery, and using it i can see all my files on that partition - it's all there, nothing's been removed. I just need somehow to fix the partition so it can be usable again. Can you tell me how, or using with which tool/software ? Thank you.

  Read the article

• Did Acronis True Image Home 2012 clone operation "lock" my BitLocker disk?

  - by Thomas Eyde

  After trying to clone my primary drive, which requires a reboot to proceed, BitLocker detected that the boot sector had changed and required the recovery keys. Not a good situation to be in on Sunday evening when it is your IT-department who hold the keys. After talking with the guys at IT, I have tree suspects on why BitLocker locked me out: The newly added, second hard drive in my machine. The changed boot-order in BIOS. The changes True Image did in order to do its things on boot. As an end-user, I should never have to end up in situations like these without any warning. I would like to know what really happened, so I can inform Acronis on how they can improve their product to avoid this situation in the future.

  Read the article

< Previous Page | 319 320 321 322 323 324 325 326 327 328 329 330  | Next Page >