Search Results

Search found 11427 results on 458 pages for 'live cd'.

Page 324/458 | < Previous Page | 320 321 322 323 324 325 326 327 328 329 330 331  | Next Page >

• Boot error aftter clean Ubuntu 13.04 install: [Reboot and select proper boot device]

  - by IcarusNM

  I am having the same problem as this guy where a fresh Ubuntu install completes beautifully but will not boot. I get the ASUS (?) "Reboot and select proper boot device" error, first with Xubuntu 13.10 and after finally giving up there, and Xubuntu 13.4, I am back to regular Ubuntu 13.4. ASUS motherboard Z77, Intel chipset. Standard internal SATA 500GB HD. 64-bit. All-new hardware less than 3 months old. It was running Ubuntu 12.04LTC great until I tried this upgrade. I have re-installed from scratch every which way: with LVM, without LVM; with the default partitions, with my own partitions. With ext3 or ext4. Alongside; replace; upgrade. No difference. On the last two tries, I have booted afterward from the same USB stick, downloaded and run boot-repair, and now I guess I am off to the boot-repair support email with my URLs from that. It did all kinds of cool stuff but ultimately made no difference. I never got anything like this with Ubuntu 12.04. I've now probably re-installed Ubuntu 13.04 ten times slightly different ways. I finally found how to skip the language packs, so at least that sped things up! :) This starts from the ubuntu-13.04-desktop-amd64.iso and UNetbootin as suggested on the official instructions for USB thumb drive creation from OSX. That part all works fine (booting the USB on the PC and trying Ubuntu and/or installing from there on the PC HD.) I have no CD drive on this PC, but I suppose I could get one. I would rather find some Linux install that works from USB like I've always done. After running boot-repair twice, in the ASUS BIOS I now see three different UEFI boot options in the priority list, and they are all labeled exactly the same: ubuntu (P6: WDC WD5000AAKX-00U6AA0) Then there's a non-UEFI option: P6: WDC WD5000AAKX-00U6AA0 (476940MB) And a fifth option appeared after the first boot-repair: Windows Boot Manager (P6: WDC WD5000AAKX-00U6AA0) I have tried all 5 of these, and I get exactly the same error. I have never had Windows installed on this HD. ASUS is calling it Windows Boot Manaer but I presume that's a mistaken label for whatever boot-repair did. I can boot on USB and run GParted and it looks great. The partitions all look normal. I found another case of this online with no solution posted. I can't find much about it online. Needs a Master Boot Record wipe/redo?? I'm not sure how.

  Read the article

• WiFi on Ubuntu 12.04 custom: downloading unbearably slow

  - by Mark

  iwconfig reports 11 Mbps, yet I've seen as low as <1 KBps. This is the latest in my laundry list of Ubuntu problems in a dual-boot machine (cyberpowerpc custom, intel i7-3820, nvidia gtx 570). I received it two days ago, Windows 7 running fine, still having problems with Ubuntu. The browsing is intermittent but unacceptable. e.g. I could get to this site last night but I couldn't post this question. The downloading is unbearably slow, I can't download anything or install any packages because the speed is so slow. e.g. I am trying to install vim which is inexplicably missing from my 12.04 install (add another one to the problems list) and my download speed reported in the terminal was 241 B/s. Yes, bytes. iwconfig reports 11 Mbps, which further adds to the confusion. User@ubuntu:~$ iwconfig lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"linksys" Mode:Managed Frequency:2.437 GHz Access Point: 00:18:39:76:2C:A1 Bit Rate=11 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=36/70 Signal level=-74 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:54 Invalid misc:18 Missed beacon:0 eth0 no wireless extensions. Any ideas? I see this is a problem a lot of people, but none of the on line solutions have worked for me so far. e.g. one site recommends editing the ath9k.conf file in /etc/modprobe.d, yet this file isn't even in the folder: User@ubuntu:/$ cd etc/modprobe.d User@ubuntu:/etc/modprobe.d$ ls alsa-base.conf blacklist-oss.conf blacklist-ath_pci.conf blacklist-rare-network.conf blacklist.conf blacklist-watchdog.conf blacklist-firewire.conf dkms.conf blacklist-framebuffer.conf nvidia-current_hybrid.conf blacklist-modem.conf nvidia-graphics-drivers.conf I think the nvidia gpu might be mucking things up. I had the "blinking cursor" problem when installing in the first place, and then I had the monitor out of range problem as well. I have my faithful Asus laptop, which is running Ubuntu 12.04 just fine. The only difference is executing host -t SOA local in the terminal gives User@ubuntu:~$ host -t SOA local local has SOA record local. nobody.localhost. 42 86400 43200 604800 10800 in my new machine, and the command reports Host local. not found in the laptop. Help would be most welcome, as I am in danger of reverting back to Windows. I'm seriously considering it. Sorry for the length, trying to show my effort in resolving the issue and include terminal snippets that might be helpful.

  Read the article

• Laptop freezes and seems to crash, but continues working after waiting for a few minutes [closed]

  - by Corwin

  I've had this old notebook laying around and because i was missing a second machine (My wife usually steals the first ;) ) I considered installing Linux. As a php developer I work with Linux servers (usually fedora) on a daily basis and because its an older machine that I want to use for development, linux seemed the best option. Speedwise I expected a good experience, better than Windows 7 on the same machine. The results where terrible. I tried ubuntu 12.04. The shell never got past showing the background. The system doesn't freeze since the mouse still works and I can use ctrl+alt+f2 etc to enter terminal mode. I expected hardware problems en even exchanged the harddisk en Ram memory. No luck though, so I started over and tried 11.10 Same results so I tried 10.04.4 which did install properly. Not sure if unity was the problem, but it seems likely. But then I tried simply things like surfing on the net, the system frooze and I thought it crashed so after a few minutes I pulled the plug and rebooted. But it happened again and I waited. After a few minutes the system came back to life like nothing happened. Long story short. Besides the fact that the entire interface is very sluggish, any and all graphical functions freezes the system. The more elaborate the animation would be, the longer it freezes. I switch chromium from window to fullscreenmode and had to wait 15 minutes to continue. I don't see the animation that's probably supposed to be in between. It just freezes and then after unfreezing its fullscreen. I don't think its a bug. I suspect the problem is with my graphics card. Like I said, its and old system. So old that I can't even find the original Ati drivers anywere. (I'll post the details of my system at the end of my post) I'm at a loss as to what to do next. I tried other Distro's. So far only dreamlinux works normally. Linux Mint won't start as a live CD. I think I simply need a driver update but I can't find them anywhere. Does anyone have the same experience ? Maybe even someone who has or had the same notebook running Ubuntu at some point ? Anyway, here are the specs: http://www.nec-driver.com/nec-driver/NEC-Versa-P550---FP550-Driver_421.html

  Read the article

• 11g ???:Active Data Guard

  - by JaneZhang(???)

  ?Oracle 11g??,????(physical Standby)???redo???,???????,???mount??11g??,???redo???,????????read-only??,????Active Data Guard ???Active Data Guard,?????????????????,??????????????   Active Data Guard???????????,??,????????????,????????,????redo??,????????????,??????????? Oracle Active Data Guard ?Oracle Database Enterprise Edition?????,??????????????   ????Active Data Guard, ??????? read-only ????,???? ALTER DATABASE RECOVER MANAGED STANDBY DATABASE????????????:??????COMPATIBLE ????????11.0.0?  ???????Active Data Guard,???V$DATABASE????"READ ONLY WITH APPLY':      SQL> SELECT open_mode FROM V$DATABASE;      OPEN_MODE      --------------------      READ ONLY WITH APPLY   ????????????,???????real-time apply:   SQL>ALTER DATABASE RECOVER MANAGED STANDBY DATABASE USING CURRENT LOGFILE; ?????????read-only????????:    • Issue SELECT statements, including queries that require multiple sorts that leverage TEMP segments    • Use ALTER SESSION and ALTER SYSTEM statements    • Use SET ROLE    • Call stored procedures    • Use database links (dblinks) to write to remote databases    • Use stored procedures to call remote procedures via dblinks    • Use SET TRANSACTION READ ONLY for transaction level read consistency    • Issue complex queries (such as grouping SET queries and WITH CLAUSE queries) ??????????read-only????????:    • Any DMLs (excluding simple SELECT statements) or DDLs    • Query accessing local sequences    • DMLs to local temporary tables    ?????Active Data Guard ??: • ????????????????? • ???Oracle Real Application Clusters (Oracle RAC) ,?????? • RAC???RAC??    Oracle Data Guard ?????,,????????:    * ?????????????????:     http://docs.oracle.com/cd/B28359_01/server.111/b28294/create_ps.htm   * ???Oracle Real Application Clusters (Oracle RAC) ,??????:     http://www.oracle.com/technetwork/database/features/availability/maa-wp-10g-racprimarysingleinstance-131970.pdf   * RAC ???RAC ??:     http://www.oracle.com/technetwork/database/features/availability/maa-wp-10g-racprimaryracphysicalsta-131940.pdf  ??Active Data Guard???????,?????:    http://www.oracle.com/technetwork/database/features/availability/maa-wp-11gr1-activedataguard-1-128199.pdf     ??Oracle Maximum Availability Architecture Best Practices?????,???:   http://www.oracle.com/goto/maa

  Read the article

• Motherboard HDDPWR1 connector

  - by Eric Leschinski

  I need help identifying the name of a connector. I have a Gateway DX4870-UB318 computer, I opened the case and wanted to attach another hard drive, but to my surprise one existing SATA hard drive was connected to the motherboard with this connector: And here is the spot on the Motherboard where the power was supplied. What is the name of this adapter and where can I get another one? Clues: This computer was bought new October 2013 from best buy, box number: DX4870-UB318. The gateway folks won't divulge the type of motherboard it has nor give specs on it. On the wire itself is an identification code: H.35090NJ01-000 Next to the connector on the motherboard it says: HDDPWR1 and the second one says HDDPWR2. This cable has two SATA power connectors and one mystery connector. The power supply has no molex power cables and no SATA power connectors! This is the most bizarre hard drive power system I've seen. I guess the motherboard folks are trying to remove the burden for desktop power supplies to provide adapters (molex, SATA, other) to CD's and hard drives. Can someone put a name on that white flat 6 pin HDD Power Connector? My Solution I can buy a "SATA Power Y Splitter Cable" to provide more spaces to power sata devices.

  Read the article

• How to disable the RAID in x3400 M2

  - by BanKtsu

  Hi I just wanna disable the default RAID in my server IBM System X3400 M2 Server(7837-24X),i have 3 disk drives SAS. I want to make them a JBOD "Just a Bunch Of Disks", because I want to install in the drive 0 CentOS, and the other two make them cache files for a squid server. I disable the RAID in the BIOS: System Settings/Adapters and UEFI drivers/LSI Logic Fusion MPT SAS Driver -PciRoot(0x0)/Pci(0x3,0X0)/Pci(0x0,0x0) LSI Logic MPT Setup Utility RAID Properties/Delete Array Later I boot the CentOS live CD and install the OS in the drive 0, and the others 2 mounted like this: *LVM Volume Groups vg_proxyserver 139508 lv_root 51200 / ext4 lv_home 84276 /home ext4 lv_swap 4032 Hard Drive sdb(/dev/sdb) free 140011 sdc(/dev/sdc) free 140011 sdd(/dev/sdd) sdd1 500 /boot ext4 sdd2 139512 vg_proxyserver physical volume(LVM) But when I restart the server give me the error: Boot failed Hard Disk 0 UEFI PXE PciRoot(0x0)/Pci(0x1,0X0)/Pci(0x0,0x0)/MAC(001A64B15130,0X0)) ........PXE-E18:Server response timeout. UEFI PXE PciRoot(0x0)/Pci(0x1,0X0)/Pci(0x0,0x0)/MAC(001A64B15132,0X0)) ........PXE-E18:Server response timeout. and the OS not start. The IBM force me to do a RAID?,why?

  Read the article

• Graphics card not working but integrated graphics is working

  - by Dustin Martin

  I have a PCIe Geforce 6600 that I've been using in my PC for a couple years now without problems. Recently though I've not been using the PC and had it unplugged. When I when to use it again I accidentally plugged in the monitor to the VGA port for the integrated graphics instead of the 6600 card VGA port and began using it again (I'm currently running Windows 7). I then realized that I had the monitor plugged in wrong and switched the monitor to the 6600 port. Unfortunately I cannot get it to work. When the monitor is plugged in to the 6600 port the monitor will not display anything; not when booting up or in Windows (so I don’t believe the problem is Windows related). I've even tried booting a live CD for Ubuntu to see if that will recognize the card but no luck. Somehow it seems I need to "turn off" the integrated graphics and instruct the PC to use the 6600 card but I'm at a loss for how to do that. I looked high and low in the BIOS for a setting to do this but cannot find anything at all. I have a MSI motherboard and AMI Bios. Any ideas?

  Read the article

• Trying to run an ASP.NET MVC application using Mono on Apache with FastCGI.

  - by Arda Xi

  I have a hosting account with DreamHost, and I would like to use the same account to run ASP.NET applications. I have an application deployed in a subdomain, a .htaccess with a handler like this: # Define the FastCGI Mono launcher as an Apache handler and let # it manage this web-application (its files and subdirectories) SetHandler monoWrapper Action monoWrapper /home/arienh4/<domain>/cgi-bin/mono.fcgi virtual My mono.fcgi is set up as such: #!/bin/sh #umask 0077 exec >>/home/arienh4/tmp/mono-fcgi.log exec 2>>/home/arienh4/tmp/mono-fcgi.err echo $(date +"[%F %T]") Starting fastcgi-mono-server2 cd / chmod 0700 /home/arienh4/tmp/mono-fcgi.sock echo $$>/home/arienh4/tmp/mono-fcgi.pid # stdin is the socket handle export PATH="/home/arienh4/mono/bin:$PATH" export LD_LIBRARY_PATH="/home/arienh4/mono/lib:$LD_LIBRARY_PATH" export TMP="/home/arienh4/tmp" export MONO_SHARED_DIR="/home/arienh4/tmp" exec /home/arienh4/mono/bin/mono /home/arienh4/mono/lib/mono/2.0/fastcgi-mono-server2.exe \ /logfile=/home/arienh4/logs/fastcgi-mono-web.log /loglevels=All \ /applications=/:/home/arienh4/<domain> I took this from the Mono site for CGI, I'm not sure if I'm doing it correctly though. This code is resulting in this error: Request exceeded the limit of 10 internal redirects due to probable configuration error. Use 'LimitInternalRecursion' to increase the limit if necessary. Use 'LogLevel debug' to get a backtrace. I have no idea what's causing this. As far as I can see, Mono isn't even hit (no log files are created).

  Read the article

• How to reset Bash on Mac OSX, .bash_profile corrupted and bash no longer works

  - by user1463172

  I am on a MacBook Pro, running the latest version of Mountain Lion. I really need some help, I have managed some how to damage my .bash_profile (I think) so that every time I open up the terminal I get the error listed below. -bash: export: `/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/local/go/bin': not a valid identifier -bash: export: `/Users/rob/Applications/sbt/bin:': not a valid identifier env: bash: No such file or directory env: bash: No such file or directory env: bash: No such file or directory env: bash: No such file or directory env: bash: No such file or directory -bash: tar: command not found -bash: grep: command not found -bash: cat: command not found -bash: find: command not found I am not sure what has happened, I have no sudo, cd or any normal commands. The only way I have been able to get to any of the main directories is through the go to folder command in finder and try to find the file to no avail. To top it all off I think I created a file that might be causing the issue, I wanted to edit the .bash_profile so I typed sudo nano ./bash_profile This open a new file in nano which I think was then saved. After this I opened the real .bash_profile to add in the path for node.js. If I can get to the .bash_profile I think I can get it back on track but I can't find it, should I reinstall bash? If so how would I do that on a mac, I tried using brew install bash to which I get -bash: brew: command not found I am really stuck if anyone can help I would be really appreciated. Many thanks

  Read the article

• javaws not found

  - by Hunt

  I have a server which has centos installed in it. Recently I have installed jdk 1.6 into it. When I try to run java command from shell it's working perfectly fine. Java is stored into /usr/java/jdk1.6.0_25 and path is set to /usr/bin/ when I type which java. When I tried running javaws (which comes with the jdk 1.6 only) it is showing me following error: Java Web Start splash screen process exiting ... Bad installation: JAVAWS_HOME not set: No such file or directory Executing env command prints following details: HOSTNAME=XX-XXX-XXX-XX TERM=xterm SHELL=/bin/bash HISTSIZE=1000 OLDPWD=/usr/java SSH_TTY=/dev/pts/1 USER=root LS_COLORS=no=00:fi=00:di=00;34:ln=00;36:pi=40;33:so=00;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=00;32:*.cmd=00;32:*.exe=00;32:*.com=00;32:*.btm=00;32:*.bat=00;32:*.sh=00;32:*.csh=00;32:*.tar=00;31:*.tgz=00;31:*.arj=00;31:*.taz=00;31:*.lzh=00;31:*.zip=00;31:*.z=00;31:*.Z=00;31:*.gz=00;31:*.bz2=00;31:*.bz=00;31:*.tz=00;31:*.rpm=00;31:*.cpio=00;31:*.jpg=00;35:*.gif=00;35:*.bmp=00;35:*.xbm=00;35:*.xpm=00;35:*.png=00;35:*.tif=00;35: JAVA_PATH=/usr/java/jre1.6.0_24/jre/bin MAIL=/var/spool/mail/root PATH=/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin:/usr/java/jre1.6.0_24/jre/bin INPUTRC=/etc/inputrc PWD=/usr/lib/jvm/jre-1.6.0-openjdk.x86_64/bin JAVA_HOME=/usr/java/jre1.6.0_24/jre/bin LANG=en_US.UTF-8 SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass SHLVL=1 HOME=/root LOGNAME=root JAVAWS_HOME=/usr/java/jre1.6.0_24/bin SSH_CONNECTION=175.100.170.26 3387 64.150.190.94 22 LESSOPEN=|/usr/bin/lesspipe.sh %s G_BROKEN_FILENAMES=1 _=/bin/env

  Read the article

• blu-ray archiving in vmware ESXi 4

  - by spacecadet77

  Hi, I need some advice about using blu-ray writer for archiving data on vmware ESXi 4. At office we have IBM System x3400 Tower server with ESXi 4 hipervisor and OpenSuse and CentOS GNU/Linux system as guests. Will blu-ray writer work in this setup, and if it will is there any particular model you can suggest. Best regards IBM System x3400 Tower server specification: 1x Intel Quad-Core Xeon E5410 2.33GHz/ 12MB/ 1333MHz (2x CPU max) Intel 5000P chipset, 2x 1GB PC2-5300 DDR2 667MHz SDRAM ECC Chipkill (32GB max) 2x4GB (2x2GB) PC2-5300 CL5 ECC DDR2 FBDIMM (x3400, x3550, x3650) SAS/SATA Hot-Swap Open Bay (0xHDD std, 4xHDD max, 8xHDD optional) ServeRAID 8K dual channel SAS/SATA controller (RAID 0,1,1E,10,5,6, 256MB, Battery Backup) Graphics ATI® RN50(ES1000) 16MB DDR, CD-RW/DVD Combo no FDD GigaEthernet, Tower with Power Supply 835W (opt Redudant) Slot 1: half-length, PCI-Express x8(x4 electrical) Slot 2: full, PCI-Express x8 Slot 3: full, PCI-Express x8 Slot 4: full, 64-bit 133MHz 3.3v PCI-X Slot 5: full, 64-bit 133MHz 3.3v PCI-X , Slot 6: half-length, 32-bit 33MHz 5.0v PCI ports: 4x USB (Vers 2.0), 2x PS/2, parallel, 2x serial (9-pin), VGA, RJ-45 (ethernet ), RJ-45 (sys mgm) HDD 4 x TB 7200rpm / Serial ATA II 3.0Gb/s / 16MB, RoHS

  Read the article

• NetBSD Networking

  - by Mike

  Hello, everyone! I have an old Toshiba Satellite 4015CDT, with Pentium II MMX, 32MB RAM, 4GB HDD. It also has one USB 1.0 port, parallel and serial ports, a 3.5" floppy drive and a CD-ROM drive (probably almost dead). I've installed NetBSD on this machine (full install) and now I want to connect it to the Internet. Although it has one PCMCIA modem card in it, it is obviously not an option. I've narrowed down my available options to the following: Connect a USB wireless adapter. I have a Realtek RTL8192 adapter, but although the system gives me the device's name (through dmesg) it fails to recognize it as a network adapter. Connect the laptop to another machine through a serial connection, so that the other machine will serve as a bridge to the Internet. Here is the page from the NetBSD documentation on serial connections. Unfortunately, I was not able to find anything on bridging there. I would very much appreciate your suggestions on the topic. Thanks in advance.

  Read the article

• Unable to install ffmpeg-php

  - by matt74tm

  I followed the instructions on http://www.mysql-apache-php.com/ffmpeg-install.htm but ffmpeg-php does not show up in my phpinfo() The commands I ran (in order) #yum install ffmpeg ffmpeg-devel ... Public key for faac-1.26-1.el5.rf.x86_64.rpm is not installed #rpm -Uhv http://apt.sw.be/redhat/el5/en/i386/rpmforge/RPMS/rpmforge-release-0.3.6-1.el5.rf.i386.rpm ... 1:rpmforge-release ########################################### [100%] #yum install ffmpeg ... Complete! #wget http://space.dl.sourceforge.net/project/ffmpeg-php/ffmpeg-php/0.6.0/ffmpeg-php-0.6.0.tbz2 ... #tar -xjf ffmpeg-php-0.6.0.tbz2 #cd ffmpeg-php-0.6.0 #phpize ... configure: error: ffmpeg headers not found. Make sure ffmpeg is compiled as shared libraries using the --enable-shared option #yum install ffmpeg-devel ... Complete! #./configure ... config.status: creating config.h #make ... Build complete. Don't forget to run 'make test'. #make install Installing shared extensions: /usr/local/lib/php/extensions/no-debug-non-zts-20090626/ #ls -al /usr/local/lib/php/extensions/no-debug-non-zts-20090626/ ... -rwxr-xr-x 1 root root 185285 Sep 20 03:36 ffmpeg.so* ... #nano /usr/local/lib/php.ini In which I put these two lines at the end of the php.ini file [ffmpeg] extension=ffmpeg.so Then, #service httpd restart But phpinfo() still does not show any 'ffmpeg' section. This is the correct php.ini because: #php -i | grep php\.ini Configuration File (php.ini) Path => /usr/local/lib Loaded Configuration File => /usr/local/lib/php.ini

  Read the article

• Ierrs on Network Interface - Pfsense/Freebsd

  - by JFA

  Hello all, We're using PfSense as an internal router/firewall (no connection to WAN). Using the Web-GUI, under Status --- Interfaces, there's one particular interface where I have some errors: In/out errors 3513/0 I then SSHed to the firewall to validate the info provided by the WebGUI and here's the output: # netstat -ni -I bce2 Name Mtu Network Address Ipkts Ierrs Opkt Oerrs Coll bce2 1500 <Link#3> 00:23:7d:cd:a2:a2 1404522323 3513 749797131 0 0 bce2 1500 10.42.1.0/24 10.42.1.24 6 - 6 - - As you can see, both present the same info (errors on incoming packets). I switched cables, changed network card, changed port on switch and I still see the errors. My 2 questions really are: 1) Is there any way I could get more info on the nature of these errors? or is this all I can get? 2) Should I be worried about this? As you can see, the errors are a VERY LOW percentage of all the total incoming packets. In other words, is this normal on a high-traffic gigabit interface? Thanks! JFA

  Read the article

• BAD ARCHIVE MIRROR using PXE BOOT method

  - by omkar

  i m trying to automatically install UBUNTU on a client PC by using the method of PXE BOOT method....my Objectives are below:- i m following the steps given in this link installation using PXE BOOT INSTALL 1:-the server will have a KICKSTART config file which contains the parameters for the OS installation and the files which are required for the OS installations. 2:-the client will have to detect this configuration along with the setup files and complete the installation without any input from the user. In my server i have installed DHCP3-server,Apache2 and TFTP for helping me with the installation. i have nearly achieved my first objective,i m able to boot my client using the files stored in the server,but during the installation stage it is asking me to "CHOOSE A MIRROR of UBUNTU ARCHIVE".i gave the server's IP address and the path in the server where the files are located but then too its giving me error "BAD ARCHIVE MIRROR". so is it possible that instead of downloading all the files from the internet and storing them on my disk , can i use the files which comes with the UBUNTU-CD, and how to store this files in what format (should i zip them ) on the disk. secondly i am also generating the ks.cfg which i wanted to give to the client for automatic installation of the OS ,so how should the configuration file be given to the installation process.

  Read the article

• Accidentally deleted symlink libc.so.6 in CentOS 6.4. How to get sudo privilege to re-create it?

  - by Eric

  I accidentally deleted the symbol link /lib64/libc.so.6 - /lib64/libc-2.12.so with $ sudo rm libc.so.6 Then I can not use anything including ls command. The error appears for any command I type ls: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory I've tried $ export LD_PRELOAD=/lib64/libc-2.12.so After this I can use ls and ln ..., but still can not use sudo ln ..., sudo -E ln ..., sudo su or even su. I always get this err sudo: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory or su: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory It seems LD_PRELOAD works only for the current shell session of my account, but not for a new account like root or a new session. It's a remote server so I can not use a live CD. I now have a ssh bash session alive but can not establish new ones. I have sudo privilege, but don't have root password. So currently my problem is I need to run sudo sln -s libc-2.12.so libc.so.6 to re-create the symlink libc.so.6, but I can not run sudo without libc.so.6. How can I fix it? Thanks~

  Read the article

• Unable to install ffmpeg-php

  - by matt_tm

  Hi, I followed the instructions on http://www.mysql-apache-php.com/ffmpeg-install.htm but ffmpeg-php does not show up in my phpinfo() The commands I ran (in order) #yum install ffmpeg ffmpeg-devel ... Public key for faac-1.26-1.el5.rf.x86_64.rpm is not installed #rpm -Uhv http://apt.sw.be/redhat/el5/en/i386/rpmforge/RPMS/rpmforge-release-0.3.6-1.el5.rf.i386.rpm ... 1:rpmforge-release ########################################### [100%] #yum install ffmpeg ... Complete! #wget http://space.dl.sourceforge.net/project/ffmpeg-php/ffmpeg-php/0.6.0/ffmpeg-php-0.6.0.tbz2 ... #tar -xjf ffmpeg-php-0.6.0.tbz2 #cd ffmpeg-php-0.6.0 #phpize ... configure: error: ffmpeg headers not found. Make sure ffmpeg is compiled as shared libraries using the --enable-shared option #yum install ffmpeg-devel ... Complete! #./configure ... config.status: creating config.h #make ... Build complete. Don't forget to run 'make test'. #make install Installing shared extensions: /usr/local/lib/php/extensions/no-debug-non-zts-20090626/ #ls -al /usr/local/lib/php/extensions/no-debug-non-zts-20090626/ ... -rwxr-xr-x 1 root root 185285 Sep 20 03:36 ffmpeg.so* ... #nano /usr/local/lib/php.ini In which I put these two lines at the end of the php.ini file [ffmpeg] extension=ffmpeg.so Then, #service httpd restart But phpinfo() still does not show any 'ffmpeg' section. This is the correct php.ini because: #php -i | grep php\.ini Configuration File (php.ini) Path => /usr/local/lib Loaded Configuration File => /usr/local/lib/php.ini

  Read the article

• DVD-ROM: Pioneer DVD-115GA not being detected.

  - by Wesley

  Specs to put things in context: AMD Athlon XP 2400+ @ 2.00 GHz / 2 x 512 MB PC-3200 DDR RAM / 160 GB IDE HDD / 128 MB GeForce 6200 AGP / FIC AM37 / Windows XP Pro SP3 So this computer is actually an upgraded EMachines T2482. I found a used DVD-ROM for cheap... the Pioneer DVD-115GA. I originally had a plain DVD Reader (Lite-On XJ-HD166S) which was quite useless. So I basically did a simple swap of the drive and powered up the computer. The drive could open and close, and I put in a DVD and it was spinning, but no detection. Going into the BIOS, the drive was not detected. (The IDE cable connecting the DVD-ROM is connected to the CD-ROM below it and then attached to the secondary IDE port on the motherboard.) So I started all the way up and tried to scan for hardware changes in Computer Management. Still, nothing. I have the software downloaded from the Pioneer site, and that couldn't detect anything. So what else can I try to hopefully get my DVD-ROM recognized by the BIOS? Thanks in advance!

  Read the article

• I need a piece software to use with my HP F4280 scanner.

  - by D Connors

  So, I got this printer/scanner about a year ago, and I'm really happy with it. The only thing is that I never really liked the HP scanning software that came with it. A few months ago I reformatted and reinstalled windows 7. Then, once I plugged in the printer, I noticed that windows recognized it automatically, and offered to install all the drivers by itself. So instead of manually installing the driver that came in the CD, I simply let windows automatically install it from its servers, and so far it's great. Instead of HP's scanning software (that really wasn't pleasing me), I got a very simplified interface that is more than enough for my ocasional scanning habits. Until today. Today I had to scan a bunch of old pictures for my father. And that simple interface felt like it was lacking quite a few features to make this repetitive task a little easier. And that's why I'm now looking for a good software to use for scanning. By "good" I mean anything well thought out, and specially anything that will make my life easier when repetitive-scanning. It doesn't need to have professional tweaking options, but having them is not a problem either. You guys got anything?

  Read the article

• Centos CMake Does Not Install Using gcc 4.7.2

  - by Devin Dixon

  A similar problem has been reported here with no solution:https://www.centos.org/modules/newbb/print.php?form=1&topic_id=42696&forum=56&order=ASC&start=0 I've added and upgraded gcc to centos cd /etc/yum.repos.d wget http://people.centos.org/tru/devtools-1.1/devtools-1.1.repo yum --enablerepo=testing-1.1-devtools-6 install devtoolset-1.1-gcc devtoolset-1.1-gcc-c++ scl enable devtoolset-1.1 bash The result is this for my gcc [root@hhvm-build-centos cmake-2.8.11.1]# gcc -v Using built-in specs. COLLECT_GCC=gcc COLLECT_LTO_WRAPPER=/opt/centos/devtoolset-1.1/root/usr/libexec/gcc/x86_64-redhat-linux/4.7.2/lto-wrapper Target: x86_64-redhat-linux Configured with: ../configure --prefix=/opt/centos/devtoolset-1.1/root/usr --mandir=/opt/centos/devtoolset-1.1/root/usr/share/man --infodir=/opt/centos/devtoolset-1.1/root/usr/share/info --with-bugurl=http://bugzilla.redhat.com/bugzilla --enable-bootstrap --enable-shared --enable-threads=posix --enable-checking=release --disable-build-with-cxx --disable-build-poststage1-with-cxx --with-system-zlib --enable-__cxa_atexit --disable-libunwind-exceptions --enable-gnu-unique-object --enable-linker-build-id --enable-languages=c,c++,fortran,lto --enable-plugin --with-linker-hash-style=gnu --enable-initfini-array --disable-libgcj --with-ppl --with-cloog --with-mpc=/home/centos/rpm/BUILD/gcc-4.7.2-20121015/obj-x86_64-redhat-linux/mpc-install --with-tune=generic --with-arch_32=i686 --build=x86_64-redhat-linux Thread model: posix gcc version 4.7.2 20121015 (Red Hat 4.7.2-5) (GCC) And I tried to then install cmake through http://www.cmake.org/cmake/resources/software.html#latest But I keep running into this error: Linking CXX executable ../bin/ccmake /opt/centos/devtoolset-1.1/root/usr/libexec/gcc/x86_64-redhat-linux/4.7.2/ld: CMakeFiles/ccmake.dir/CursesDialog/cmCursesMainForm.cxx.o: undefined reference to symbol 'keypad' /opt/centos/devtoolset-1.1/root/usr/libexec/gcc/x86_64-redhat-linux/4.7.2/ld: note: 'keypad' is defined in DSO /lib64/libtinfo.so.5 so try adding it to the linker command line /lib64/libtinfo.so.5: could not read symbols: Invalid operation collect2: error: ld returned 1 exit status gmake[2]: *** [bin/ccmake] Error 1 gmake[1]: *** [Source/CMakeFiles/ccmake.dir/all] Error 2 gmake: *** [all] Error 2 The problem seems to come from the new gcc installed because it works with the default install. Is there a solution to this problem?

  Read the article

• Disable raid member check upon mount to mount damaged nvidia raid1 member

  - by Halfgaar

  Hi, A friend of mine destroyed his Nvidia RAID1 array somehow and in trying to fix it, he ended up with a non-working array. Because of the RAID metadata, the actual disk data was stored at an offset from the beginning. I was able to identify this offset with dd and a hexeditor and then I used losetup to create a loop device with the proper offset, so that I could mount the partition. It was then that I ran into problems, namely that mount says: "mount: unknown filesystem type 'nvidia_raid_member'". I also had this when trying to mount a Linux MD component the other day, and because I can remember that doing that in the past worked, I surmised that it may be some kind of protection. I therefore booted an old Sysrescue CD and tried it there, which worked (because of the older version of mount/libc/kernel/whatever). I still need to try to get more data, and because I don't want to keep using that SysrecueCD, I'd like to be able to mount the disk on my normal system. So, my question is: can the check for a disk being a raid member be disabled? I guess I could also zero out blocks that look like the raid block, but I'd rather not... I made an image of the disk with par2 data, so it's revertable, but still...

  Read the article

• Problem booting virtual machine after converting VMDK to VHD

  - by vg1890

  I used the VMWare VCenter Converter Standalone Client to convert a physical drive on my old PC to a virtual drive. The conversion worked fine and I ended up with a valid VMDK file. Next, I wanted to convert the VMDK to a VHD for use with Microsoft Virtual PC, since that's what I use on my new box. I used WinImage for the conversion and that worked fine, too. I can access the files from the virtual drive through WinImage. However, when I create a new virtual machine using Virtual PC and add the existing VHD file, the machine doesn't boot. The initial boot screen flashes with the amount of RAM and then the screen goes black. If I turn off the VM and reboot in safe mode I can see the drivers being loaded until eventually it gets to crcdisk.sys and hangs indefinitely. Any ideas how to fix this? I'm not opposed to starting over from scratch if there's another method to turn my physical machine into a Virtual PC VM. Thanks! EDIT - I should add that the virtual drive is a system boot drive and not a secondary drive. EDIT - I tried booting from the install CD and doing a repair. The result was that the system could not be repaired due to a "driver error."

  Read the article

• WebDav rename fails on an Apache mod_dav install behind NginX

  - by The Daemons Advocate

  I'm trying to solve a problem with renaming files over WebDav. Our stack consists of a single machine, serving content through Nginx, Varnish and Apache. When you try to rename a file, the operation fails with the stack that we're currently using. To connect to WebDav, a client program must: Connect over https://host:443 to NginX NginX unwraps and forwards the request to a Varnish server on http://localhost:81 Varnish forwards the request to Apache on http://localhost:82, which offers a session via mod_dav Here's an example of a failed rename: $ cadaver https://webdav.domain/ Authentication required for Webdav on server `webdav.domain': Username: user Password: dav:/> cd sandbox dav:/sandbox/> mkdir test Creating `test': succeeded. dav:/sandbox/> ls Listing collection `/sandbox/': succeeded. Coll: test 0 Mar 12 16:00 dav:/sandbox/> move test newtest Moving `/sandbox/test' to `/sandbox/newtest': redirect to http://webdav.domain/sandbox/test/ dav:/sandbox/> ls Listing collection `/sandbox/': succeeded. Coll: test 0 Mar 12 16:00 For more feedback, the WebDrive windows client logged an error 502 (Bad Gateway) and 303 (?) on the rename operation. The extended logs gave this information: Destination URI refers to different scheme or port (https://hostname:443) (want: http://hostname:82). Some other Restrictions: Investigations into NginX's Webdav modules show that it doesn't really fit our needs, and forwarding webdav traffic to Apache isn't an option because we don't want to enable Apache SSL. Are there any ways to trick mod_dav to forward to another host? I'm open to ideas :).

  Read the article

• local msmtp and ovh hosting

  - by klez

  I have my personal email hosted on OVH (personal hosting plan) and I'm not able to send mails using msmtp. Here's a typical session ignoring system configuration file /etc/msmtprc: File o directory non esistente loaded user configuration file /home/klez/.msmtprc using account default from /home/klez/.msmtprc host = ssl0.ovh.net port = 465 timeout = off protocol = smtp domain = localhost auth = choose user = federicoculloca%xxxxxxx password = * ntlmdomain = (not set) tls = on tls_starttls = off tls_trust_file = (not set) tls_crl_file = (not set) tls_fingerprint = (not set) tls_key_file = (not set) tls_cert_file = (not set) tls_certcheck = off tls_force_sslv3 = off tls_min_dh_prime_bits = (not set) tls_priorities = (not set) auto_from = off maildomain = (not set) from = federicoculloca@xxxxxxxx dsn_notify = (not set) dsn_return = (not set) keepbcc = off logfile = (not set) syslog = (not set) reading recipients from the command line TLS certificate information: Owner: Common Name: ssl0.ovh.net Organizational unit: Domain Control Validated Issuer: Common Name: OVH Secure Certification Authority Organization: OVH SAS Organizational unit: Low Assurance Country: FR Validity: Activation time: lun 31 gen 2011 01:00:00 CET Expiration time: mer 15 feb 2012 00:59:59 CET Fingerprints: SHA1: F9:DC:41:F9:A2:38:51:9B:56:E4:98:E6:CD:81:31:42:E6:0E:26:6D MD5: FC:EC:F3:8F:28:E4:7E:28:99:89:E6:BB:C9:DF:71:CE <-- 220 ns0.ovh.net ssl0.ovh.net. You connect to mail427.ha.ovh.net ESMTP --> EHLO localhost <-- 250-ssl0.ovh.net. You connect to mail427.ha.ovh.net <-- 250-AUTH LOGIN PLAIN <-- 250-AUTH=LOGIN PLAIN <-- 250-PIPELINING <-- 250-8BITMIME <-- 250 SIZE 109000000 --> AUTH PLAIN xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx <-- 235 ok, go ahead (#2.0.0) --> MAIL FROM:<federicoculloca@xxxxx> --> RCPT TO:<[email protected]> --> DATA <-- 250 ok <-- 250 ok <-- 354 go ahead --> hello world --> . <-- 554 mail server permanently rejected message (#5.3.0) And my configuration # ~/.msmtp # Mostly from Peter Garrett's examples # https://lists.ubuntu.com/archives/ubuntu-users/2007-September/122698.html # Accounts from Scott Robbins' `A Quick Guide to Mutt' # http://home.nyc.rr.com/computertaijutsu/mutt.html account xxxxx host ssl0.ovh.net from federicoculloca@xxxxxx auth on user federicoculloca%xxxxxx password xxxxxx tls on tls_certcheck off tls_starttls off Any idea?

  Read the article

• mysql-python on Snow Leopard with MySQL 64-bit

  - by Derek Reynolds

  Can't seem to get mysql-python to work on Snow Leopard for the life of me. Currently using the default version of python that ships with Snow Leopard (python 2.6.1). Installed MySQL 5.1.45 x86_64. I download the source for mysql-python http://sourceforge.net/projects/mysql-python/ and compile with the following commands: tar xzf MySQL-python-1.2.3c1.tar.gz cd MySQL-python-1.2.3c1 ARCHFLAGS='-arch x86_64' python setup.py build ARCHFLAGS='-arch x86_64' python setup.py install And am getting the following error when I try to import: Python 2.6.1 (r261:67515, Jul 7 2009, 23:51:51) [GCC 4.2.1 (Apple Inc. build 5646)] on darwin Type "help", "copyright", "credits" or "license" for more information. >>> import MySQLdb Traceback (most recent call last): File "<stdin>", line 1, in <module> File "build/bdist.macosx-10.6-universal/egg/MySQLdb/__init__.py", line 19, in <module> File "build/bdist.macosx-10.6-universal/egg/_mysql.py", line 7, in <module> File "build/bdist.macosx-10.6-universal/egg/_mysql.py", line 6, in __bootstrap__ ImportError: dlopen(/Users/derek/.python-eggs/MySQL_python-1.2.3c1-py2.6-macosx-10.6-universal.egg-tmp/_mysql.so, 2): no suitable image found. Did find: /Users/derek/.python-eggs/MySQL_python-1.2.3c1-py2.6-macosx-10.6-universal.egg-tmp/_mysql.so: mach-o, but wrong architecture Any ideas? Or the best route for starting over.

  Read the article

< Previous Page | 320 321 322 323 324 325 326 327 328 329 330 331  | Next Page >