Search Results

Search found 8957 results on 359 pages for 'rails guy'.

Page 324/359 | < Previous Page | 320 321 322 323 324 325 326 327 328 329 330 331  | Next Page >

• Instant connection to wireless network but delayed internet access on Mediacom with Windows 7

  - by David

  I have Mediacom cable internet and their provided modem/wireless router a Cisco DPC3825. Each of the laptops experiencing the trouble have Windows 7 64-bit. When connecting to the wireless network each computer will take a second or two to connect and then toggle from "no internet access" to "internet access" however, no websites are accessible for about five minutes after connecting. After that, there aren't any problems. It happens on all 3 of the laptops I have available and none of them have problems on any other network. It seems like my phone doesn't have the delay issue when it connects. I've power cycled the modem/router along with a DNS flush. I have some of the DNS servers manually set to Google DNS addresses and one just default. I've contacted and had Mediacom support try all its tricks. They changed the SSID and password along with resetting the thing remotely a handful of times. It was installed just this month and seemed to pass the tech's checks upon installation. Nothing in the settings has been changed, but it's been exhibiting this problem from the get go. This guy seems to be having the same problem, but no solution was posted. http://www.dslreports.com/forum/r27372861-IA-Connection-to-Mediacom-wireless-Modem-no-internet- Help greatly appreciated.

  Read the article

• Apache2 Doesn't Serve Subdomain Alias

  - by Cyle Hunter

  I'm trying to prefix an existing Rails application with a sub-domain, essentially I want the sub-domain to serve the same application. Right now apache2 serves my application with "www.example.com" or "example.com". I adjusted my sites-available virtualhost in hopes of allowing for "foo.example.com" or "www.foo.example.com" however both instances are met with a domain not found error. Here is my current VirtualHost in /etc/apache2/sites-available/example.com: <VirtualHost *:80> ServerName example.com ServerAlias foo.example.com *.example.com www.foo.example.com www.example.com DocumentRoot /home/user/my_app/public <Directory /home/user/my_app/public> AllowOverride all Options -MultiViews </Directory> </VirtualHost> Any ideas? Note, I realized I probably don't need a wild card sub-domain for what I'm trying to do, I simply added that in as a last-ditch effort. Edit: The actual domain is virtualrobotgames.com with the desired subdomain being roboteer.virtualrobotgames.com

  Read the article

• Which internet scenario would be better?

  - by JL

  I currently have an 8mbps (down) / 512kbps (up) telephone ADSL solution. I must say the reliability is excellent, and up until now its been the fastest connection I could get because I don't live in a cable zone. The real speed of my connection is around 7mbps, but sometimes I manage to get the full 8mbps. I use my connection for work, so it needs to be at least 99% reliable. Recently I was told by a guy who lives up the road that he has a wireless connection with an external antenna and his speeds are 20mbps / 512kbps - he's also paying about 1/2 of what I pay for my wired telephone connection. My question is, is wireless internet good enough for a power user who uses his connection for work 8 hours a day, including VPNing into servers remotely. Besides this I also enjoy playing the odd network game, not a WoW freak, but sometimes I do pick up the odd MMORPG and at times do indulge in some semi heavy gaming sprees. Will this wireless latency drive me crazy and seem slow in comparison? Will it be reliable enough, I also live in an area that snows heavily in winter. I guess its a question of - should I go wireless or not. I've only had 1 wireless connection before and that was years ago using iBurst technology and I remember it was terrible for VPN, but I guess the technology might have been improved since then? What do you guys think?

  Read the article

• Relaying requests between third party server and Heroku for static IP

  - by Gady

  I have a rails application hosted on Heroku that I need to integrate with 3rd party payments provider. The payment provider requires that my application will have a static IP for incoming and outgoing HTTPS requests. I want to deploy a proxy on a Linode VPS so it can relay the information as a proxy. Relaying the request to the service provider seems easy, I just use their IP. Can I relay requests coming from the service provider to the heroku application? Can I realy the request using a URL (https://myapp.herokuapp.com) ? What is the recommended proxy server to use?

  Read the article

• Browser history, by window

  - by Alex

  I use Chrome --but can switch to another browser if the feature I am about to describe is available. Browsing history, AFAIK in Chrome is sorted exclusively chronologically. Very often however, I will be working on a particular task on my laptop and have multiple (read: a lot) of tabs open in a single Chrome window for that task. Before finishing that task, I may need to work on something else --so I will open another window and minimize the other one, and start researching an entirely different issue. Over the course of a day, I may end up with 10-15 windows with many tabs each. This raises two issues: (a) memory usage and (b) quickly switching between the most relevant two or three windows. I solve these two problems like any regular guy probably would --closing windows. I want to be able to reopen specific windows that I have closed, such that the tabs that were open in that window at the time the window was closed will reopen. Ideally, closed windows will be sorted by the time they were closed and identified by the tabs that were open (even more ideally, I would be able to name these windows (contemporaneously or in the history menu)). Now that I describe this, what I am asking is: does any browser offer the ability to "save and close" windows? (This is distinct from an option to auto-restore tabs upon reopening the browser) Thank you.

  Read the article

• Can't do more than one activity at a time after switching modems

  - by vallorn

  I had to replace the Motorola 2210 DSL modem that I got when I signed up for AT&T DSL Direct a few years ago. The modem kept randomly restarting and it eventually gave out on me. I am assuming overheating was the cause here because it was almost too hot to touch. In any case, I replaced it with a Netgear DM111PSP. It works fine but I can't do more than one activity at a time with it. If my wife is watching Netflix, there is a noticeable delay/latency when trying to view web sites. It's even worse if I try to play an on-line game while she's streaming; the game is basically unplayable. The odd thing is, the only other activity I can do while she's streaming is stream another Netflix show myself. There is no delay when doing that, no buffering either. I'm not a networking guy so maybe there is an explanation for it but I find that kind of odd. I've tried using QoS through my Buffalo N600 wireless router and it doesn't seem to help. With the old Motorola modem, she could be watching Netflix while I play a game and everything worked just fine. Is there anything I can check or reconfigure possibly on the modem that would account for this? Should I just ditch the Netgear and get another modem instead? I have the Netgear modem connected to the Buffalo router in a bridged mode. Its the same exact setup as I had with the Motorola and as far as I can tell, it's not the router that is the cause.

  Read the article

• How to send T.38 from a mac?

  - by Brian Postow

  I'm trying to set up a fax-server on a macintosh. I have Hylafax, and we're going to use an internet FOIP fax provider (Haven't decided who yet, that may be another question). The problem is how to get from Hylafax to T.38. I know of two options, but I'm not sure how to decide between them: T38modem Advantages: It's only one extra program, and i know that I can compile it for the Mac. (well, At least I can get the H323 version working on a Mac) Disadvantages: It is mostly undocumented and seems to be supported only by one guy in Russia. IAXModem/Asterisk Advantages: It's well known, and well supported. We can pay for support. It presumably does the T38 with SIP correctly, so we don't have to worry about it. Disadvantages: It's two separate programs. While I know how to get Asterisk on a mac, I'm not sure about IAXModem. (It's sourceforge, and linux, but compiling things for a mac isn't always straight forward...) It's also mostly undocumented. Do these seem like an accurate listing of the pros/cons? Anyone have any other suggestions? thanks.

  Read the article

• Cannot upgrade to Lion using DVD

  - by James

  When I first setup my MBP on 10.6 I made a lot of newb mistakes, and was unable to get Ruby on Rails to install, amongst a lot of other things. Because of this, I decided to backup everything on to a Time Machine HDD and re-install Lion. I had a bunch of problems but managed to sort them out, requiring me to go back to 10.6 from the original disc that came with the MBP. Before I did anything however, I burnt the Lion installer that I got from the App Store to a DVD. Now though, when I try to run it, I get the following: Cannot download additional components. I've managed to download software updates, so I know it can connect to the Apple servers.

  Read the article

• What is the difference between Startup programs in windows and the same programs being started manually

  - by sup

  I am no Windows guy, but I am trying to get a seamless integration of Windows program through Virtual Box Windows guest onto my Ubuntu machine. I more or less followed this tutorial: https://nowhere.dk/articles/running-windows-applications-natively-with-seamlessrdp Basically I start up Windows in Virtual Box and then I try to launch an application (on Ubuntu host) like this: rdesktop -A -s "c:\Program Files\ThinLinc\WTSTools\seamlessrdpshell.exe notepad.exe" 192.168.123.103:3389 -u user -p password That just gives me full Windows desktop that I do not want. However, when I run (on the Windows guest) "c:\Program Files\ThinLinc\WTSTools\seamlessrdpshell.exe" "notepad" The command above works and I get just the window I want. Now, so I thought I would put this command into startup folder of the Windows machine and everything would be fine. But it says "Unable to set up the virtual channel". (by googling, I nailed it to this file: https://sourceforge.net/p/rdesktop/code/1686/tree/seamlessrdp/trunk/ServerExe/vchannel.c - the warning is triggered (by main.c in the same directory) when function vchannel_open() returns something that C interprets as yes for if condition). I have no idea why it works when I launch this command manually via a bat file and not when I put it to startup programs. Any ideas?

  Read the article

• Social-Networking Startup, Hosting Plan

  - by pws5068

  I've created a social networking community which is soon ready to release, and I'm trying to decide on a type of hosting plan. I have considered options such as VPS and Reseller plans. I anticipate (or hope for at least) a significant amount of traffic/bandwidth in the not-too-distant future. If I open a reseller, will I receive the same amount of server lag during busy hours that I do with a shared account? How significant is the profit margin with the reseller option? Aside from generalized "configurability", what advantages merit purchasing a VPS? Is there anything stopping me from reselling space on a VPS account? Features I need Include: PHP, MySql, Unlimited Domains, Ruby on Rails, Remote Database Connections

  Read the article

• Checkpoint VPN-1 R60 and Windows 7 64 Bit Client

  - by Mohit

  As per my knowledge of checkpoint VPN-1. My company is using checkpoint VPN-1 R 60 ( I guess as I dont know how to check server version) Firewall(VPN Server). Now the problem is that I installed Windows 7 64 bit. But, after my research I found that there are not even one client (SecuRemote/SecuClient) for Win7 64 bit, when Firewall or server is R60. I thought of some open source solutions. Can you guys please suggest me some with the configuration required. As of now, I know the IP of the server. I know my username and password using which I connect and that is not my domain password. that i can confirm to you guys. I am not a network guy. I am more of a developer. But, I need some help in this.So, let me know if I can provide you more details. Please please i need urgent help on this.

  Read the article

• Openldap, groups, admin groups, etc

  - by Juan Diego

  We have a samba server as PDC with OpenLDAP. So far everything is working, even windows 7 can log on to the Domain. Here is the tricky part. We have many departments, each department has it's own IT guys, and these IT guy should be able to create users in their department and change any info of the users in their department. My Idea was to create 2 groups for each department, For example: Department1 and Admins Department1. Admins Deparment1 has "write" priviledges for members of group Department dn: ou=People,dc=mydomain,dc=com,dc=ec objectClass: top objectClass: organizationalUnit ou: People dn: cn=Admins,ou=Group,dc=mydomain,dc=com,dc=ec objectClass: groupOfNames objectClass: top cn: Admins dn: cn=Admins Department1,cn=Admins,ou=Group,dc=mydomain,dc=com,dc=ec objectClass: groupOfNames objectClass: top cn: Admins Department1 member: uid=jdc,ou=People,dc=mydomain,dc=com,dc=ec structuralObjectClass: groupOfNames I dont know if you should make Department1 as part of Domain Users dn: cn=Deparment1,cn=Domain Users,ou=Group,dc=mydomain,dc=com,dc=ec objectClass: groupOfNames objectClass: top cn: Deparment1 member: uid=user1,ou=People,dc=mydomain,dc=com,dc=ec Or just create the deparments like this. dn: cn=Deparment1,ou=Group,dc=mydomain,dc=com,dc=ec objectClass: groupOfNames objectClass: top cn: Deparment1 member: uid=user1,ou=People,dc=mydomain,dc=com,dc=ec I seems that when you use smbldap tools bydefault the users are part of Domain Users even if you dont have them as part of Domain Users in the memberUid attribute, when I use finger they showup as part of the Domain Users group. I dont want the Departments Admins to be Domain Admins because they have power over all the users, unless I am mistaken. I also have trouble with the ACLs. I was trying to create an acl for members of this Admins group, I was trying with this search, but didnt work ldapsearch -x "(&(objectClass=organizationalPerson)(member=cn=Admins Department1,ou=Group,dc=mydomain,dc=com,dc=ec))" I am open to suggestions.

  Read the article

• Getting 2560x1600 out of an ATI Radeon HD 4670 on Windows 7

  - by Alexey

  Greetings, I've got a Dell Studio XPS 1640 laptop (with an ATI Radeon HD 4670 graphics card) running Windows 7, and just bought a Dell 3007HPC 30-inch monitor for it. I'm trying to figure out how to get the full 2560x1600 experience out of this setup. Here's what I've done so far: Plug in using an HDMI cable and an HDMI--D-DVI converter on the monitor side. Open up Screen Resolution. Maximum supported setting is 1920x1080. Tried that (several times) - sometimes it doesn't work at all (blank screen); other times, it only shows the first 1280x800 pixels on the bigger screen. Tried using the Catalyst control center - played with various settings there, couldn't get the screen to show anything interesting. Tried using PowerStrip to set a custom resolution, again, no luck. Spoke to a Dell Preferred Custom Support guy for about an hour before giving up. He remote-accessed my computer, and told me that (1) The maximum supported resolution for XPS 1640 is 1920x1080, and (2) 'it seems to be working from where he sees it, must be a connection issue'. None of this has helped. Does anybody have ideas? Should I be using a different cable set up? Am I using Powerstrip wrong?

  Read the article

• Premature end of script headers

  - by Tony

  I often get a "premature end of script headers" error in my apache log which results to an internal 500 error. I understand what the error message means - that my application did not give the browser the headers it needs (and maybe nothing at all), but the odd thing is that this does not happen all the time. It actually usually happens the first few times I go to my website after a deploy. Could this be a memory issue? Does anyone know how to trouble shoot this? My apache log isn't really telling me anything. I am running a ruby site using the rails framework on ubuntu hardy. thank you!

  Read the article

• creating TAGS for Ruby and emacs

  - by hortitude

  I ran the following from my top level Ruby on Rails directory find . -name "*.rb" | etags - Then within emacs I visited that tag file. This works reasonably well to find some of the methods and most of the files, however it is having trouble finding some of the extra methods/classes that I use in my helpers directory. e.g. I have a file in my helpers dir called my_foo_helper.rb If I search my tags for that file, it finds it. However, if I try to find a tag for one of the methods within that module it doesn't find it at all. If I use Aptana or something like that it seems to be able to locate those methods. Any thoughts? Thanks!

  Read the article

• Getting live traffic/visitor analytics when using a reverse proxy

  - by jotto

  I'm in process of implementing Varnish as a reverse proxy for a Ruby on Rails app and I'm using Google Analytics (JS/client side script to record visitor data) but it's several hours delayed so its useless for knowing what's going on now. I need at a glance live data that includes referring traffic and what current req/sec is. Right now I am using a simple Rack middleware application to do the live stats (gist.github.com/235745) but if the majority of traffic hits Varnish, Rack will never be hit so this won't work. The closest solution I've found so far is http://www.reinvigorate.net/ but it's in beta (there are also no implementation details on their front page). Does Varnish have traffic logs that I can custom format to match my Apache logs so I can combine them, or will I have to roll my own JS implementation like GA that shows the data in real time?

  Read the article

• Some Can reach bidmail.com others can't.

  - by user69426

  On a windows 7 Professional machine in Chrome one of our Estimating assistants can't get to www.bidmail.com, however the other 3 can. On his machine I did nslookup then bidmail.com and it fails to find it. I then went to a machine that could reach bidmail and did nslookup. It can't find it. I was skeptical and thought maybe it was a cached page so I cleared the cache then went back to bidmail.com was able to get to the page, login, lookup a newly posted bid then download the file. Yet I can not look it up through nslookup and I can't ping it www.bidmail.com and I can't trace it. I remoted to our other warehouse which is set up as a workgroup and attempt to nslookup bidmail and that nslookup fail... and on that machine which has never been to bidmail before it was able to connect to the website! I am totally confused if I can't ping it and I can't use nslookup to get there how in the hell is Chrome getting to the page and how do I get this guy back on? Also while typing this I took a new laptop out of the box plugged it in with no updates and can get to bidmail! omg!

  Read the article

• Using radvd to advertise ipv6 over VPN connection using DD-wrt

  - by Sean Madden

  My ultimate goal is to allow VPN users to have access to my internal IPv6 network from across the intertubes. I've got a linksys WRT54GSv2 running DD-WRTv24SP1 and have configured the little guy as specified here http://www.dd-wrt.com/wiki/index.php/IPv6 and it works wonderfully over the br0 interface (LAN/WLAN bridge). Here's the issue though, when I add an additional interface to the radvd config file on the router (specifically ppp0, for the VPN traffic), radvd refuses to start. The kicker is that on DDWRT, it doesn't give an error message, it just fails outright. Any suggestions on where to proceed from here? /jffs/radvd.conf: interface br0 { AdvSendAdvert on; prefix 0:0:0:1::/64 { AdvOnLink on; AdvAutonomous on; }; }; interface ppp0 { AdvSendAdvert on; prefix 0:0:0:1::/64 { AdvOnLink on; AdvAutonomous on; }; }; The documentation I've found for radvd is slim, but if anyone has a decent idea on how to proceed I'd love to hear it.

  Read the article

• Suggestions for accessing SQL Server from internet

  - by Ian Boyd

  i need to be able to access a customer's SQL Server, and ideally their entire LAN, remotely. They have a firewall/router, but the guy responsible for it is unwilling to open ports for SQL Server, and is unable to support PPTP forwarding. The admin did open VNC, on a non-stanrdard port, but since they have a dynamic IP it is difficult to find them all the time. In the past i have created a VPN connection that connects back to our network. But that didn't work so well, since when i need access i have to ask the computer-phobic users to double-click the icon and press Connect i did try creating a scheduled task that attempts to keep the VPN connection back to our office up at all times by running: >rasdial "vpn to me" But after a few months the VPN connection went insane, and thought it was both, and neither, connected an disconnected; and the vpn connection wouldn't work again until the server was rebooted. Can anyone think of a way where i can access the customer's LAN that doesn't involve opening ports on the router needing to know their external IP customer interaction of any kind Blah blah blah use vpn vnc protocol has known weaknesses you are unwise to lower your defenses it's not wise to expose SQL Server directly to the internet you stole that line from Empire Customer doesn't care about any of that. Customer wants things to work.

  Read the article

• Router recommendation to virtualize 800 IPs

  - by delerious010

  I've recently been looking at getting some new load balancers for our environment as we are expecting to double our client base in the next 12 months. Currently we have 400 public IPS serving 800 clusters ( 2 clusters / IP due to ports ) on Coyote Point Balancers, and distributing connections to 3 web servers serving about 6GBytes outgoing, 2Gbytes in per day. If we double, this would be about 800 IPs, possibly 1600 clusters, and about 6 servers per cluster ( for a total of 9600 so called "real servers" using Barracuda's lingo ). Due to the amount of clusters, most solutions I've looked at ( Coyote, Barracuda, Loadbalancer.org ) seem to be unsure whether they'll be able to handle our planned growth, mostly due to health checks performed on the servers ... which makes total sense when you think of it. So the fine folk at loadbalancer.org recommended that we may be better off offload the 400-800 public IPs, which we require for SSL eCommerce solutions, over to a forward facing router. From that point on, the router could do some mangling to route EXT_IP:443 to INT_IP:INT_PORT which would then allow us to reduce the Load Balancer configuration to 1 or 2 clusters, thus resolving the health check problem. Does this idea make sense to yall ? Or would you have other recommendations to make ? Secondly, what router would you recommend for such an undertaking ? I'd be looking at something that has some form of failover mechanism built in. On a totally unrelated note, I've got to admit that I'm extremely pleased with the responses I got from loadbalancer.org. Their responses to my inquiries were surprisingly helpful ( i.e. I didn't feel as if I was taking to a sales guy trying to push something ). ( No I don't work for them, and sadly nor are they sending me free gear ).

  Read the article

• Monitoring outgoing messages using EXIM

  - by dashmug

  I work as an IT guy in a law firm. I am recently asked to make a system wherein all the outgoing emails coming from our server to our clients will be put on hold first and wait for approval before it gets sent to the client. Our mail server uses Exim (that's what it says in cPanel). I am planning to create filters where the outgoing emails will be forwarded to an editor account. Then, the editor will review and edit the contents of the email. When the editor already approves the email, it will then get sent to the client by the editor but still using the original sender in the "From:" and "Reply-To:" field. I found some pointers from this site = http://www.devco.net/archives/2006/03/24/saving_copies_of_all_email_using_exim.php. Once the filters are in place, I want to make a simple PHP interface for the editor to check the forwarded emails and edit them if necessary. The editor can then click on an "Approve" button that will finally deliver the message using the original sender. I'm also thinking that maybe a PHP-less system will be enough. The editor can receive the emails from his own email client edit them and simply send the email as if he is the original sender. Is my plan feasible? Will there be issues that I have overlooked? Does it have the danger of being treated as spam by the other mailservers since I'll be messing up the headers?

  Read the article

• Swap static public IPs without creating DNS conflicts?

  - by Jakobud

  Our ISP is Comcast and we have 5 static public IPs from them that we use for various services, including customers connecting to our network, VPN, web, DNS, etc... We need more IP addresses from Comcast. Unfortunately, Comcast is telling us that they can't just simply give us 5 more addresses. They only give static IP addresses in blocks of 1, 5 or 13. In order for us to get more static IPs, they have to take away our current 5 static IPs and give us 13 new ones. How do we make this transition without causing all sorts of DNS chaos? We run public DNS servers, so we can make the DNS changes ourselves, but it will take some time obviously for those DNS changes to propagate throughout the internet. Are there any easy ways to make this transition? Like create some type of fallback DNS entry or something? Surely there must be some sort of procedure for this kind of thing. The Comcast support guy was useless.

  Read the article

• Best photo management software?

  - by Niels Basjes

  Hi, What I would like is a single piece of software (or a smart combination of tools) that allow me to manage my photos in a better way than what I've found so far. 1. Tags Primarily I need a way of tagging the images. So I can manually tag photos the same way we tag questions here at SO/SF/SU. I want this software to place a lot of the tags automagically (obvious things like date and resolution). 2. Face recognition What I would really like is that this software has a feature that it can recognize faces in images and places tags with the name of the person. So far I've only heard of one online photo system that can do that (Picasa) and not yet of any offline tool. 3. Version database I must have some way of having a central GIT/SVN/... that contains all images. I have had a harddrive corruption a few years ago and it took me a long time to figure out which images had been damaged. I always want to be able to go back to what the camera produced. 4. Website I want to be able to generate a website (few 'tag' specific websites) based on the actual content. 5. Easy bulk uploading Many photo tools have a one on one uploading option. I prefer simply 'throwing' my images on a file server under Linux (Samba) and let the system automagically integrate, tag, recognize, etc. all images. Ok, I know these are a bit much. Perhaps you guy's have some suggestions about existing tools that can make this possible. Or even a complete system that does this. EDIT: To clarify on the OS. I prefer Linux for any 'server' task and Windows XP for any 'desktop' task. Thanks for all your input. Niels Basjes

  Read the article

• How to setup a user account for a web application

  - by ximus

  Hi, What are the main guidelines to setting up a user account on a Linux machine for a web app? In my case it is a Rails application that does file management. First thing I can think of is to limit access rights to only the directories it needs. But how exactly should I go about this? Setup rights through a user group or a through the user's ownership of those directories. I have very little experience in user rights management. What else do I need to consider? I've heard of ACL's and SELinux, do I need to look into any of these to guaranty decent security for my simple web app? Any advice about this and anything not mentioned welcomed, Thanks, Max. I will be using Ubuntu.

  Read the article

• filesystem compatible with freenas and windows

  - by Daniel

  Hi all, I'm planning on using FreeNAS (was considering openfiler but freenas seems simpler) for my home NAS box running off ESXI. I have managed to get local sata drives to mount in ESXI (http://serverfault.com/questions/216902/esxi-add-datastore-without-partitioning). I've had one of the drives fail on my before and I was able to retrieve most of the data off it using windows tools (I'm not much of a linux guy I know enough to be dangerous!). If I go the freenas route in the event that something goes bad what would be the best file system to use so that I could pop the drive out of the freenas box (vm) and put it in another pc running windows so I could try and run various recovery tools to get the data back. All in all its not a major problem if I lose the data just would be a bit annoying, so I'm not looking for suggestions around backing up etc. I was considering using NTFS that the drives are already formatted as but it appears that while freenas does support NTFS that its a bit buggy and not 100% reliable, anyone know if this is still true? Read that on a forum somewhere.

  Read the article

< Previous Page | 320 321 322 323 324 325 326 327 328 329 330 331  | Next Page >