Search Results

Search found 69645 results on 2786 pages for 'real time systems'.

Page 324/2786 | < Previous Page | 320 321 322 323 324 325 326 327 328 329 330 331  | Next Page >

• How to calculate CPU % based on raw CPU ticks in SNMP

  - by bjeanes

  According to http://net-snmp.sourceforge.net/docs/mibs/ucdavis.html#scalar_notcurrent ssCpuUser, ssCpuSystem, ssCpuIdle, etc are deprecated in favor of the raw variants (ssCpuRawUser, etc). The former values (which don't cover things like nice, wait, kernel, interrupt, etc) returned a percentage value: The percentage of CPU time spent processing user-level code, calculated over the last minute. This object has been deprecated in favour of 'ssCpuRawUser(50)', which can be used to calculate the same metric, but over any desired time period. The raw values return the "raw" number of ticks the CPU spent: The number of 'ticks' (typically 1/100s) spent processing user-level code. On a multi-processor system, the 'ssCpuRaw*' counters are cumulative over all CPUs, so their sum will typically be N*100 (for N processors). My question is: how do you turn the number of ticks into percentage? That is, how do you know how many ticks per second (it's typically — which implies not always — 1/100s, which either means 1 every 100 seconds or that a tick represents 1/100th of a second). I imagine you also need to know how many CPUs there are or you need to fetch all the CPU values to add them all together. I can't seem to find a MIB that gives you an integer value for # of CPUs which makes the former route awkward. The latter route seems unreliable because some of the numbers overlap (sometimes). For example, ssCpuRawWait has the following warning: This object will not be implemented on hosts where the underlying operating system does not measure this particular CPU metric. This time may also be included within the 'ssCpuRawSystem(52)' counter. Some help would be appreciated. Everywhere seems to just say that % is deprecated because it can be derived, but I haven't found anywhere that shows the official standard way to perform this derivation. The second component is that these "ticks" seem to be cumulative instead of over some time period. How do I sample values over some time period? The ultimate information I want is: % of user, system, idle, nice (and ideally steal, though there doesn't seem to be a standard MIB for this) "currently" (over the last 1-60s would probably be sufficient, with a preference for smaller time spans).

  Read the article

• Very High Interrupt CPU usage in Win2k3 VM on vSphere

  - by Darragh

  Hi, I've been testing some software in a server virtual environment and I've noticed I get a huge amount of CPU usage on the Interrupts process. My question is, how does this relate to the virtual hardware platform as the rate is allot lower in a real system. Some how the hypervizor scheduler works hard to over come this problem but not as well as on real hardware does. Obvious things are high I/O and disk access but this application mostly just sits and works in memory allot. If anyone has experienced the same, please let me know. thanks in advance Screenshot: Process Explorer

  Read the article

• Unable to set nginx to serve my staging website

  - by user100778

  I'm having some troubles setting up nginx to serve my staging website. What I did is change the server_name but for some reasons it just doesn't work. The url scheme is "domain.foo" is production, "staging.domain.foo" is staging, "foobar.domain.foo" is a web service, "foobar.staging.domain.foo" is the staging version of the same webserver, ".domain.foo" is routed to serve some s3 static HTML, ".staging.domain.foo" is routed to serve some s3 static HTML in another bucket. All production urls work and are correctly configured, all staging urls doesn't work. Here is my conf file. You will see some duplication, I will gladly accept any correction/optimization, I'm a coder and configuring servers is definitely not my thing (but I'm eager to learn and improve...). server { listen 80; ## listen for ipv4 server_name "domain.foo" "www.domain.foo" default_server; access_log /var/log/nginx/access.log; client_max_body_size 5M; location / { proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_redirect off; location ~* \.(jpg|jpeg|gif|png|ico|css|bmp|js|html)$ { access_log off; expires max; root /home/foo/Foo/current/public; break; } if ($host ~ 'www.domain.foo') { rewrite ^/(.*)$ http://domain/foo/$1 permanent; } proxy_pass http://production; break; } } server { listen 80; server_name "staging.domain.foo"; access_log /var/log/nginx/access.staging.log; error_log /var/log/nginx/error.staging.log; client_max_body_size 5M; location / { proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_redirect off; proxy_pass http://staging; break; } } server { listen 80; ## listen for ipv4 server_name "foobar.domain.foo"; access_log /var/log/nginx/access.log; location / { proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_redirect off; if ($host = 'foobar.domain.foo') { proxy_pass http://foobar; break; } } } server { listen 80; ## listen for ipv4 server_name foobar.staging.domain.foo; location / { proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_redirect off; proxy_pass http://foobar_staging; break; } } server { listen 80; server_name "~^(.+)\.domain\.foo$"; location / { proxy_intercept_errors on; error_page 404 = http://domain.foo/404; set $subdomain $1; rewrite /$ "/$subdomain/index.html" break; rewrite ^ /$subdomain$request_uri? break; proxy_pass http://bucket.domain.foo.s3.amazonaws.com; } } server { listen 80; server_name "~^(.+)\.staging\.domain\.foo$"; location / { proxy_intercept_errors on; set $subdomain $1; rewrite /$ "/$subdomain/index.html" break; rewrite ^ /$subdomain$request_uri? break; proxy_pass http://bucket.staging.domain.foo.s3.amazonaws.com; } } upstream production { server 111.255.111.110:8000; server 111.255.111.110:8001; server 111.255.111.110:8002; server 111.255.111.110:8003; } upstream staging { server 222.255.222.222:8000; server 222.255.222.222:8001; } upstream foobar { server 111.255.222.165:9000; server 111.255.222.165:9001; server 111.255.222.165:9002; } upstream foobar_staging { server 222.255.222.222:9000; } What happens now when I point my browser to staging.domain.foo is that it hangs. Can't find anything in the logs, but for example the access.staging.log and errors.staging.log are created. Anybody has an idea? :)

  Read the article

• Can Windows log CryptoAPI CRL timouts?

  - by makerofthings7

  We have several .NET applications that occasionally "act slow" with no CPU or disk access. I suspect that they are hung up on authentication when trying to validate the certificate, since the timeout is almost 20 seconds. As per this MSFT article Most applications do not specify to CryptoAPI to use a cumulative time-out. If the cumulative time-out option is not enabled, CryptoAPI uses the CryptoAPI default setting which is a time-out of 15 seconds per URL. If the cumulative time-out option specified by the application, then CryptoAPI will use a default setting of 20 seconds as the cumulative timeout. The first URL receives a maximum timeout of 10 seconds. Each subsequent URL timeout is half of the remaining balance in the cumulative timeout value. Since this is a service, how can I detect and log CryptoAPI hangs for applications I have sourcecode to, and also 3rd party

  Read the article

• HTTP Error 503 - Service is unavailable (how fix?)

  - by SilverLight

  i have a web site for download mobile files and there many users in my web site. sometimes i have the error below : HTTP Error 503 - Service is unavailable 1-so why this error happens and what is that mean? 2-as i know appache free up itself when it's oveloaded, but what about iis? how can i put some limitations in my server (i have remote access to my server) for prevent this error happening? a.is limitation of dowload's speed efficient for prevent that error's occur? how can i do that? is squid useful for this job or i can do that with another iis extension. b.is limitation of download's Bandwidth efficient for prevent that error's occur? how can i do that (with iis or another extension)? in right side of iis - configure area - i found some limits. what do those limits mean and can i use them for keep my server alive all the time? EDIT: after viewing event viewer of windows - custom views - server rols - web server (iis) i figure out there is no error in that area. but many warnings and information. the latest warnings and information are like below : warning A worker process '2408' serving application pool 'ASP.NET 4.0 (Integrated)' failed to stop a listener channel for protocol 'http' in the allotted time. The data field contains the error number. warning A process serving application pool 'ASP.NET 4.0 (Integrated)' exceeded time limits during shut down. The process id was '6764'. warning A worker process '3232' serving application pool 'ASP.NET 4.0 (Integrated)' failed to stop a listener channel for protocol 'http' in the allotted time. The data field contains the error number. warning A process serving application pool 'ASP.NET 4.0 (Integrated)' exceeded time limits during shut down. The process id was '3928'. thanks in advance best regards

  Read the article

• gparted installed on OpenSuse shows all file system types as greyed out except for hfs

  - by cmdematos

  I have had this problem before and fixed it, but I don't recall how I did it and I did not record it (sadness :( ) I have all the requisite commands installed on OpenSuse to support gparted's efforts in creating any of the supported file systems. I recall that the problem was that gparted could not find the commands, in any event all the file systems are greyed out in the context menu except for the legacy hfs partition which only supports < 2gb. Even extfs2-extfs4 are greyed out. How do I fix this?

  Read the article

• what is acceptable datastore latency on VMware ESXi host?

  - by BeowulfNode42

  Looking at our performance figures on our existing VMware ESXi 4.1 host at the Datastore/Real-time performance data Write Latency Avg 14 ms Max 41 ms Read Latency Avg 4.5 ms Max 12 ms People don't seem to be complaining too much about it being slow with those numbers. But how much higher could they get before people found it to be a problem? We are reviewing our head office systems due to running low on storage space, and are tossing up between buying a 2nd VM host with DAS or buying some sort of NAS for SMB file shares in the near term and maybe running VMs from it in the longer term. Currently we have just under 40 staff at head office with 9 smaller branches spread across the country. Head office is runnning in an MS RDS session based environment with linux ERP and mail systems. In total 22 VMs on a single host with DAS made from a RAID 10 made of 6x 15k SAS disks.

  Read the article

• Immutable hard links on ext3/4?

  - by shovas

  In my research on file versioning at the fs level, snapshotting, and related ideas, I took a look at hard-links and exactly what they are and how they behave. Using rsync you can get a pretty slick poor man's snapshotting system up and running on file systems that don't natively support it. But, can you get immutable hard links on ext3/4 or any other file systems for that matter? My definition for immutable hard link is: A hard link which, when changed on one location, becomes a regular copy and no longer a hard link. I would like this because it would enable snapshotting use of the source data to link against instead of a copy of the data (in the case of the rsync snapshotting technique). I have gigabytes of data that can't be duplicated due to space restrictions but I have enough room if I can intelligently snapshot individual changed files with the rest linked to the source not a copy. Given all that, is there some other technique, feature or technology I'm really looking for?

  Read the article

• Cacti dskIndex RHEL

  - by andyh_ky

  I'm attempting to use includeAllDisks in my snmpd.conf for RHEL 4 and RHEL 5 machines, but no data is being returned on the Cacti Data Query. snmpwalk isn't giving me any results. $ snmpwalk -v 2c -c public 172.19.4.140 .1.3.6.1.4.1.2021.9.1.1 UCD-SNMP-MIB::dskIndex = No Such Instance currently exists at this OID If I add disk / to snmpd.conf snmpwalk gives me the right results. $ snmpwalk -v 2c -c public 172.19.4.140 .1.3.6.1.4.1.2021.9.1.1 UCD-SNMP-MIB::dskIndex.1 = INTEGER: 1 I am wanting to deploy this to many systems using the same snmpd.conf (via Satellite). The disk configuration varies among systems and manually configuring snmpd.conf is not an optimal solution. Is there a way to get includeAllDisks to work? My snmpd.conf file: rocommunity public <cacti server IP> dontPrintUnits true includeAllDisks

  Read the article

• What proportion of DBA skills are platform-independent?

  - by Arkaaito

  Problem: we've grown to the point where we need a real DBA. Real DBAs are hard to find. Possible solution: I know someone with extensive experience (currently working on MSSQL) who is looking for a new DBA job. He might be willing to consider working for a MySQL shop (I haven't asked). Snag: I don't know to what extent MSSQL DBA skills map to MySQL DBA skills. I'm a developer, so I know enough about MySQL to develop apps which use it (including the basic performance-tuning, index selection, etc.), do schema design, and perform simple utility tasks (backup with mysqldump, scripting, etc.). I don't know anything about MSSQL. Nor do I actually know much about the boundaries of the DBA role. Can anyone with more experience - perhaps as a DBA - weigh in on this? Are there enough similarities between MSSQL and MySQL that it's worth asking a MSSQL DBA if he'd be interested in applying for a MySQL position?

  Read the article

• Nginx Fastcgi performance issues

  - by Barry

  I am running several fastcgi servers behind Nginx. I run 3 Nginx workers and 6 fastcgi servers as upstream backends. When I run load tests of 1 req per sec, I can clearly see that on avarage a reply is 0.1sec, but from time to time there are 3.1 sec responses. It is a suspiciously deterministic number and it happens even at very small loads from time to time. Both CPU and Memory are of no issue at all. Any idea where this delay may be comming from? Any suggestions how to debug this? Many thanks, Barry.

  Read the article

• Linux - Only first virtual interface can ping external gateway

  - by husvar

  I created 3 virtual interfaces with different mac addresses all linked to the same physical interface. I see that they successfully arp for the gw and they can ping (the request is coming in the packet capture in wireshark). However the ping utility does not count the responses. Does anyone knows the issue? I am running Ubuntu 14.04 in a VmWare. root@ubuntu:~# ip link sh 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000 link/ether 00:0c:29:bc:fc:8b brd ff:ff:ff:ff:ff:ff root@ubuntu:~# ip addr sh 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 00:0c:29:bc:fc:8b brd ff:ff:ff:ff:ff:ff inet6 fe80::20c:29ff:febc:fc8b/64 scope link valid_lft forever preferred_lft forever root@ubuntu:~# ip route sh root@ubuntu:~# ip link add link eth0 eth0.1 addr 00:00:00:00:00:11 type macvlan root@ubuntu:~# ip link add link eth0 eth0.2 addr 00:00:00:00:00:22 type macvlan root@ubuntu:~# ip link add link eth0 eth0.3 addr 00:00:00:00:00:33 type macvlan root@ubuntu:~# ip -4 link sh 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000 link/ether 00:0c:29:bc:fc:8b brd ff:ff:ff:ff:ff:ff 18: eth0.1@eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default link/ether 00:00:00:00:00:11 brd ff:ff:ff:ff:ff:ff 19: eth0.2@eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default link/ether 00:00:00:00:00:22 brd ff:ff:ff:ff:ff:ff 20: eth0.3@eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default link/ether 00:00:00:00:00:33 brd ff:ff:ff:ff:ff:ff root@ubuntu:~# ip -4 addr sh 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever root@ubuntu:~# ip -4 route sh root@ubuntu:~# dhclient -v eth0.1 Internet Systems Consortium DHCP Client 4.2.4 Copyright 2004-2012 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0.1/00:00:00:00:00:11 Sending on LPF/eth0.1/00:00:00:00:00:11 Sending on Socket/fallback DHCPDISCOVER on eth0.1 to 255.255.255.255 port 67 interval 3 (xid=0x568eac05) DHCPREQUEST of 192.168.1.145 on eth0.1 to 255.255.255.255 port 67 (xid=0x568eac05) DHCPOFFER of 192.168.1.145 from 192.168.1.254 DHCPACK of 192.168.1.145 from 192.168.1.254 bound to 192.168.1.145 -- renewal in 1473 seconds. root@ubuntu:~# dhclient -v eth0.2 Internet Systems Consortium DHCP Client 4.2.4 Copyright 2004-2012 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0.2/00:00:00:00:00:22 Sending on LPF/eth0.2/00:00:00:00:00:22 Sending on Socket/fallback DHCPDISCOVER on eth0.2 to 255.255.255.255 port 67 interval 3 (xid=0x21e3114e) DHCPREQUEST of 192.168.1.146 on eth0.2 to 255.255.255.255 port 67 (xid=0x21e3114e) DHCPOFFER of 192.168.1.146 from 192.168.1.254 DHCPACK of 192.168.1.146 from 192.168.1.254 bound to 192.168.1.146 -- renewal in 1366 seconds. root@ubuntu:~# dhclient -v eth0.3 Internet Systems Consortium DHCP Client 4.2.4 Copyright 2004-2012 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0.3/00:00:00:00:00:33 Sending on LPF/eth0.3/00:00:00:00:00:33 Sending on Socket/fallback DHCPDISCOVER on eth0.3 to 255.255.255.255 port 67 interval 3 (xid=0x11dc5f03) DHCPREQUEST of 192.168.1.147 on eth0.3 to 255.255.255.255 port 67 (xid=0x11dc5f03) DHCPOFFER of 192.168.1.147 from 192.168.1.254 DHCPACK of 192.168.1.147 from 192.168.1.254 bound to 192.168.1.147 -- renewal in 1657 seconds. root@ubuntu:~# ip -4 link sh 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000 link/ether 00:0c:29:bc:fc:8b brd ff:ff:ff:ff:ff:ff 18: eth0.1@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN mode DEFAULT group default link/ether 00:00:00:00:00:11 brd ff:ff:ff:ff:ff:ff 19: eth0.2@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN mode DEFAULT group default link/ether 00:00:00:00:00:22 brd ff:ff:ff:ff:ff:ff 20: eth0.3@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN mode DEFAULT group default link/ether 00:00:00:00:00:33 brd ff:ff:ff:ff:ff:ff root@ubuntu:~# ip -4 addr sh 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever 18: eth0.1@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default inet 192.168.1.145/24 brd 192.168.1.255 scope global eth0.1 valid_lft forever preferred_lft forever 19: eth0.2@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default inet 192.168.1.146/24 brd 192.168.1.255 scope global eth0.2 valid_lft forever preferred_lft forever 20: eth0.3@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default inet 192.168.1.147/24 brd 192.168.1.255 scope global eth0.3 valid_lft forever preferred_lft forever root@ubuntu:~# ip -4 route sh default via 192.168.1.254 dev eth0.1 192.168.1.0/24 dev eth0.1 proto kernel scope link src 192.168.1.145 192.168.1.0/24 dev eth0.2 proto kernel scope link src 192.168.1.146 192.168.1.0/24 dev eth0.3 proto kernel scope link src 192.168.1.147 root@ubuntu:~# arping -c 5 -I eth0.1 192.168.1.254 ARPING 192.168.1.254 from 192.168.1.145 eth0.1 Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 6.936ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 2.986ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 0.654ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 5.137ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 2.426ms Sent 5 probes (1 broadcast(s)) Received 5 response(s) root@ubuntu:~# arping -c 5 -I eth0.2 192.168.1.254 ARPING 192.168.1.254 from 192.168.1.146 eth0.2 Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 5.665ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 3.753ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 16.500ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 3.287ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 32.438ms Sent 5 probes (1 broadcast(s)) Received 5 response(s) root@ubuntu:~# arping -c 5 -I eth0.3 192.168.1.254 ARPING 192.168.1.254 from 192.168.1.147 eth0.3 Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 4.422ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 2.429ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 2.321ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 40.423ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 2.268ms Sent 5 probes (1 broadcast(s)) Received 5 response(s) root@ubuntu:~# tcpdump -n -i eth0.1 -v & [1] 5317 root@ubuntu:~# ping -c5 -q -I eth0.1 192.168.1.254 PING 192.168.1.254 (192.168.1.254) from 192.168.1.145 eth0.1: 56(84) bytes of data. tcpdump: listening on eth0.1, link-type EN10MB (Ethernet), capture size 65535 bytes 13:18:37.612558 IP (tos 0x0, ttl 64, id 2595, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.145 > 192.168.1.254: ICMP echo request, id 5318, seq 2, length 64 13:18:37.618864 IP (tos 0x68, ttl 64, id 14493, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.145: ICMP echo reply, id 5318, seq 2, length 64 13:18:37.743650 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.87 tell 192.168.1.86, length 46 13:18:38.134997 IP (tos 0x0, ttl 128, id 23547, offset 0, flags [none], proto UDP (17), length 229) 192.168.1.86.138 > 192.168.1.255.138: NBT UDP PACKET(138) 13:18:38.614580 IP (tos 0x0, ttl 64, id 2596, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.145 > 192.168.1.254: ICMP echo request, id 5318, seq 3, length 64 13:18:38.793479 IP (tos 0x68, ttl 64, id 14495, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.145: ICMP echo reply, id 5318, seq 3, length 64 13:18:39.151282 IP6 (class 0x68, hlim 255, next-header ICMPv6 (58) payload length: 32) fe80::5a98:35ff:fe57:e070 > ff02::1:ff6b:e9b4: [icmp6 sum ok] ICMP6, neighbor solicitation, length 32, who has 2001:818:d812:da00:8ae3:abff:fe6b:e9b4 source link-address option (1), length 8 (1): 58:98:35:57:a0:70 13:18:39.615612 IP (tos 0x0, ttl 64, id 2597, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.145 > 192.168.1.254: ICMP echo request, id 5318, seq 4, length 64 13:18:39.746981 IP (tos 0x68, ttl 64, id 14496, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.145: ICMP echo reply, id 5318, seq 4, length 64 --- 192.168.1.254 ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4008ms rtt min/avg/max/mdev = 2.793/67.810/178.934/73.108 ms root@ubuntu:~# killall tcpdump >> /dev/null 2>&1 9 packets captured 12 packets received by filter 0 packets dropped by kernel [1]+ Done tcpdump -n -i eth0.1 -v root@ubuntu:~# tcpdump -n -i eth0.2 -v & [1] 5320 root@ubuntu:~# ping -c5 -q -I eth0.2 192.168.1.254 PING 192.168.1.254 (192.168.1.254) from 192.168.1.146 eth0.2: 56(84) bytes of data. tcpdump: listening on eth0.2, link-type EN10MB (Ethernet), capture size 65535 bytes 13:18:41.536874 ARP, Ethernet (len 6), IPv4 (len 4), Reply 192.168.1.254 is-at 58:98:35:57:a0:70, length 46 13:18:41.536933 IP (tos 0x0, ttl 64, id 2599, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.146 > 192.168.1.254: ICMP echo request, id 5321, seq 1, length 64 13:18:41.539255 IP (tos 0x68, ttl 64, id 14507, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.146: ICMP echo reply, id 5321, seq 1, length 64 13:18:42.127715 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.87 tell 192.168.1.86, length 46 13:18:42.511725 IP (tos 0x0, ttl 64, id 2600, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.146 > 192.168.1.254: ICMP echo request, id 5321, seq 2, length 64 13:18:42.514385 IP (tos 0x68, ttl 64, id 14527, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.146: ICMP echo reply, id 5321, seq 2, length 64 13:18:42.743856 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.87 tell 192.168.1.86, length 46 13:18:43.511727 IP (tos 0x0, ttl 64, id 2601, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.146 > 192.168.1.254: ICMP echo request, id 5321, seq 3, length 64 13:18:43.513768 IP (tos 0x68, ttl 64, id 14528, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.146: ICMP echo reply, id 5321, seq 3, length 64 13:18:43.637598 IP (tos 0x0, ttl 128, id 23551, offset 0, flags [none], proto UDP (17), length 225) 192.168.1.86.17500 > 255.255.255.255.17500: UDP, length 197 13:18:43.641185 IP (tos 0x0, ttl 128, id 23552, offset 0, flags [none], proto UDP (17), length 225) 192.168.1.86.17500 > 192.168.1.255.17500: UDP, length 197 13:18:43.641201 IP (tos 0x0, ttl 128, id 23553, offset 0, flags [none], proto UDP (17), length 225) 192.168.1.86.17500 > 255.255.255.255.17500: UDP, length 197 13:18:43.743890 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.87 tell 192.168.1.86, length 46 13:18:44.510758 IP (tos 0x0, ttl 64, id 2602, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.146 > 192.168.1.254: ICMP echo request, id 5321, seq 4, length 64 13:18:44.512892 IP (tos 0x68, ttl 64, id 14538, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.146: ICMP echo reply, id 5321, seq 4, length 64 13:18:45.510794 IP (tos 0x0, ttl 64, id 2603, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.146 > 192.168.1.254: ICMP echo request, id 5321, seq 5, length 64 13:18:45.519701 IP (tos 0x68, ttl 64, id 14539, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.146: ICMP echo reply, id 5321, seq 5, length 64 13:18:49.287554 IP6 (class 0x68, hlim 255, next-header ICMPv6 (58) payload length: 32) fe80::5a98:35ff:fe57:e070 > ff02::1:ff6b:e9b4: [icmp6 sum ok] ICMP6, neighbor solicitation, length 32, who has 2001:818:d812:da00:8ae3:abff:fe6b:e9b4 source link-address option (1), length 8 (1): 58:98:35:57:a0:70 13:18:50.013463 IP (tos 0x0, ttl 255, id 50737, offset 0, flags [DF], proto UDP (17), length 73) 192.168.1.146.5353 > 224.0.0.251.5353: 0 [2q] PTR (QM)? _ipps._tcp.local. PTR (QM)? _ipp._tcp.local. (45) 13:18:50.218874 IP6 (class 0x68, hlim 255, next-header ICMPv6 (58) payload length: 32) fe80::5a98:35ff:fe57:e070 > ff02::1:ff6b:e9b4: [icmp6 sum ok] ICMP6, neighbor solicitation, length 32, who has 2001:818:d812:da00:8ae3:abff:fe6b:e9b4 source link-address option (1), length 8 (1): 58:98:35:57:a0:70 13:18:51.129961 IP6 (class 0x68, hlim 255, next-header ICMPv6 (58) payload length: 32) fe80::5a98:35ff:fe57:e070 > ff02::1:ff6b:e9b4: [icmp6 sum ok] ICMP6, neighbor solicitation, length 32, who has 2001:818:d812:da00:8ae3:abff:fe6b:e9b4 source link-address option (1), length 8 (1): 58:98:35:57:a0:70 13:18:52.197074 IP6 (hlim 255, next-header UDP (17) payload length: 53) 2001:818:d812:da00:200:ff:fe00:22.5353 > ff02::fb.5353: [udp sum ok] 0 [2q] PTR (QM)? _ipps._tcp.local. PTR (QM)? _ipp._tcp.local. (45) 13:18:54.128240 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.87 tell 192.168.1.86, length 46 --- 192.168.1.254 ping statistics --- 5 packets transmitted, 0 received, 100% packet loss, time 4000ms root@ubuntu:~# killall tcpdump >> /dev/null 2>&1 13:18:54.657731 IP6 (class 0x68, hlim 255, next-header ICMPv6 (58) payload length: 32) fe80::5a98:35ff:fe57:e070 > ff02::1:ff6b:e9b4: [icmp6 sum ok] ICMP6, neighbor solicitation, length 32, who has 2001:818:d812:da00:8ae3:abff:fe6b:e9b4 source link-address option (1), length 8 (1): 58:98:35:57:a0:70 13:18:54.743174 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.87 tell 192.168.1.86, length 46 25 packets captured 26 packets received by filter 0 packets dropped by kernel [1]+ Done tcpdump -n -i eth0.2 -v root@ubuntu:~# tcpdump -n -i eth0.3 icmp & [1] 5324 root@ubuntu:~# ping -c5 -q -I eth0.3 192.168.1.254 PING 192.168.1.254 (192.168.1.254) from 192.168.1.147 eth0.3: 56(84) bytes of data. tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth0.3, link-type EN10MB (Ethernet), capture size 65535 bytes 13:18:56.373434 IP 192.168.1.147 > 192.168.1.254: ICMP echo request, id 5325, seq 1, length 64 13:18:57.372116 IP 192.168.1.147 > 192.168.1.254: ICMP echo request, id 5325, seq 2, length 64 13:18:57.381263 IP 192.168.1.254 > 192.168.1.147: ICMP echo reply, id 5325, seq 2, length 64 13:18:58.371141 IP 192.168.1.147 > 192.168.1.254: ICMP echo request, id 5325, seq 3, length 64 13:18:58.373275 IP 192.168.1.254 > 192.168.1.147: ICMP echo reply, id 5325, seq 3, length 64 13:18:59.371165 IP 192.168.1.147 > 192.168.1.254: ICMP echo request, id 5325, seq 4, length 64 13:18:59.373259 IP 192.168.1.254 > 192.168.1.147: ICMP echo reply, id 5325, seq 4, length 64 13:19:00.371211 IP 192.168.1.147 > 192.168.1.254: ICMP echo request, id 5325, seq 5, length 64 13:19:00.373278 IP 192.168.1.254 > 192.168.1.147: ICMP echo reply, id 5325, seq 5, length 64 --- 192.168.1.254 ping statistics --- 5 packets transmitted, 1 received, 80% packet loss, time 4001ms rtt min/avg/max/mdev = 13.666/13.666/13.666/0.000 ms root@ubuntu:~# killall tcpdump >> /dev/null 2>&1 9 packets captured 10 packets received by filter 0 packets dropped by kernel [1]+ Done tcpdump -n -i eth0.3 icmp root@ubuntu:~# arp -n Address HWtype HWaddress Flags Mask Iface 192.168.1.254 ether 58:98:35:57:a0:70 C eth0.1 192.168.1.254 ether 58:98:35:57:a0:70 C eth0.2 192.168.1.254 ether 58:98:35:57:a0:70 C eth0.3

  Read the article

• Suggest me a good php-fpm configuartion

  - by Werulz

  I am configuring a server for a friend.The server has the following specs 8GB RAM Quad Core processor 1 TB HDD 100 mbps port However all php files are loadking very slowly.I did a speedtest and server takes 16 secs to Load FIRST byte.I strongly believe its my php-fpm configuration.Server uses nginx and php only , no mysql etc... My current php-fpm configuration pm.max_children = 50 pm.start_servers = 10 pm.min_spare_servers = 5 pm.max_spare_servers = 35 Server load and ram usage are perfectly fine Please suggest me a good configuration for this server UPDATE: This configuration works fine pm.max_children = 20 pm.start_servers = 7 pm.min_spare_servers = 5 pm.max_spare_servers = 10 pm.max_requests = 100 The problem with first byte load time is solved.However after like 15-20 hours First byte load time increase gradually. I have to reload php-fpm to get small load time Based on my conf above what i modify to it so that first byte load time remain small and i don't have to restart it:P

  Read the article

• Data loss through permissions change?

  - by charliehorse55

  I seem to have deleted some files on my media drive, simply by changing the permissions. The Story I have many operating systems installed on my computer, and constantly switch between them. I bought a 1TB HD and formatted it as HFS+ (not journaled). It worked well between OSX and all of my linux installations while having much better metadata support than NTFS. I never synced the UIDs for my operating systems so the permissions were always doing funny things. Yesterday I tried to fix the permissions by first changing the UIDs of the other operating systems to match OSX, and then changing the file ownership of all files on the drive to match OSX. About 50% of the files on the drive were originally owned by OSX, the other half were owned by the various linux installations. I started to try and change the file permissions for the folders, and that's when it went south. The Commands These commands were run recursively on the one section of the drive. sudo chflags nouchg sudo chflags -N sudo chown myusername sudo chmod 666 sudo chgrp staff The Bad Sometime during the execution of these commands, all of the files belonging to OSX were deleted. If a folder had linux based files it would remain intact but any folder containing exclusively OSX files was erased. If a folder containing linux files also contained a subfolder with only OSX files, the sub folder would remain but is inaccesible and displays a file size of 0 bytes. Luckily these commands were only run on the videos folder, I also have a music folder with the same issue but I did not execute any of these commands on it. Effectively I have examples of the file permissions for all 3 states - the linux files before and after, and the OSX files before. OSX File Before -rw-r--r--@ 1 charliehorse 1000 3634241 15 Nov 2008 /path/to/file com.apple.FinderInfo 32 Linux File before: -rw-r--r--@ 1 charliehorse 1000 5321776 20 Sep 2002 /path/to/file/ com.apple.FinderInfo 32 Linux File After (Read only): (Different file, but I believe the same permissions originally) -rw-rw-rw-@ 1 charliehorse staff 366982610 17 Jun 2008 /path/to/file com.apple.FinderInfo 32 These files still exist so if there are any other commands to run on them to determine what has happened here, I can do that. EDIT Running ls on one of the "empty" deleted OSX folders yields this: ls: .: Permission denied ls: ..: Permission denied ls: subdirA: Permission denied ls: subdirB: Permission denied ls: subdirC: Permission denied ls: subdirD: Permission denied I believe my files might still be there, but the permissions are screwed.

  Read the article

• How can I expire non-active sessions on my Netscreen SSG140?

  - by David Mackintosh

  I have a Juniper Netscreen SSG-140. While experimenting with a VoIP service, I defined a custom policy that was to be used to permit the possible ports in use to be sent back to the VoIP server from systems connecting across the internet. Because I'd had problems in the past with VoIP systems getting broken when their UDP sessions were expired out faster than their keep-alives were generated, I set the timeout on this custom service to be 'never'. After much experimentation, I happened to notice that my session count on the firewall has grown from a couple thousand to over 36000. After discussion with the VoIP "expert", I set the timeout to be 30 minutes; however, all the sessions set up during the experimentation process are still there, more than 3 days later. Is there a way I can force these old sessions to get expired and removed from the session table, or am I looking at resetting my firewall? (Both firewalls, actually -- they are in a cluster.)

  Read the article

• How to remove request blocking on apache reverse proxy after failure of backend before asking backen

  - by matnagel

  I am working on an apache2 reverse proxy vhost. When the server behind apache is down, the first request to apache shows the error page of course. But at subsequent requests it seems apache delays for some time before asking the backend server again. During all this time (which is short but in development I don't want a delay at all) only the apache error page is shown to the browser, although the backend server is already up. Where is this setting in apache, what is this behaviour, and how can I set the delay time to zero? Edit: I am not trying to change the timeout for a single request. I want to change the blocking time. It is my experience that apache blocks further requests for a certain time before asking a backend server again that has failed once. Edit2: This is what apache delivers: Service Temporarily Unavailable The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later. Apache/2.2.8 (Ubuntu) PHP/5.2.4-2ubuntu5.7 with Suhosin-Patch proxy_html/3.0.0 Server at localhost Port 80 After hitting Ctrl-R in firefox for 60 seconds the page finally appears.

  Read the article

• IIS7 rejecting POST requests with 400 error.

  - by Eli

  I have a web application that is supposed to handle post requests from SAP. This has been working fine at other customers with win2k3 systems (IIS6) and win2k8 (IIS7) systems. However, on this specific customer's site, IIS responds with a 400 response, without calling my aspx page. In fact, I don't even see it appear in the w3c log for the virtual directory. I do see the request using Network Monitor, so I know no firewalls and the like are eating the request, and as far as I can tell, all of the fields of the request are valid (there is "content-length", it looks correct (this is a sending of a 28K tiff file - which isn't MIME encoded, curiously enough now that I think of it...) Ideas?

  Read the article

• Command line tool for MediaWiki?

  - by Magnus

  Is there a command line tool that would allow me to script creation of accounts on a MediaWiki instance? The UI for creating an account is painful, and very time consuming when tasked with creating 10+ accounts at a time. Unfortunately I can't get ImportUsers to work due to the very old version of MediaWiki we use (and upgrading is unfortunately not possible at this time).

  Read the article

• ActiveSync / Exchange 2007 password expiration buffer on device

  - by Matt Hamende

  I'm trying to determine if there is any buffer of time from the time a password expires in AD to the time that users would stop receiving email on their mobile devices our setup is Exchange 2007 ActiveSync DC's are Server 2008 R2 primarily Android shop, with maybe a few iOS devices I've heard some rumors of people still receiving email after their password expired / changed on the domain, just want to see if anyone else has ever heard of this. Did a bit more reading, read about Token Cache in IIS 7.0 and 15min lagtime, still would like to hear any thoughts about this.

  Read the article

• Wget works, Ping doesn't

  - by derty

  There are some anomalies on a Virtuozzo virtualized Debian 4 (I know, I'm gonna upgrade this one asap, but there dependences). We run some Websites on this one. And a view Days ago exmi4 wasnt able to send mails to SOME people. I'll use live.com as exampledomain! So some of this people got mails and some didn't. Some of the mails got stuck in the queue, and after 2 days they went out!! My Nagios never showed problems with the internet connection or disk space Now i wanted to install "dig" to look how he's solving the dns request. And this Debian tells me he doesn't know dig.. Long story made short, Debian is able to download sites with exact IP or even with wget live.com, but it is not able to ping live.com. I'm 99% sure that the networking is right and the routing too! Some examples of my tring below: wget live.com downloads the site ping live.com ping http://www.live.com ping http://live.com returns: ping: unknown host live.com EDIT: i now use heise.de not live.com any more. and i found out i can ping the heise.de server by using it's IP-address. myserver:~# ping 193.99.144.85 PING 193.99.144.85 (193.99.144.85) 56(84) bytes of data. 64 bytes from 193.99.144.85: icmp_seq=1 ttl=248 time=12.7 ms 64 bytes from 193.99.144.85: icmp_seq=2 ttl=248 time=12.6 ms 64 bytes from 193.99.144.85: icmp_seq=3 ttl=248 time=12.9 ms 64 bytes from 193.99.144.85: icmp_seq=4 ttl=248 time=13.1 ms 64 bytes from 193.99.144.85: icmp_seq=5 ttl=248 time=13.1 ms --- 193.99.144.85 ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4001ms rtt min/avg/max/mdev = 12.671/12.924/13.163/0.238 ms EDIT 2: myserver:/etc/apt# dig heise.de ; <<>> DiG 9.3.4-P1.2 <<>> heise.de ;; global options: printcmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 40551 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 5, ADDITIONAL: 3 ;; QUESTION SECTION: ;heise.de. IN A ;; ANSWER SECTION: heise.de. 2266 IN A 193.99.144.80 ;; AUTHORITY SECTION: heise.de. 1622 IN NS ns.pop-hannover.de. heise.de. 1622 IN NS ns.s.plusline.de. heise.de. 1622 IN NS ns.plusline.de. heise.de. 1622 IN NS ns2.pop-hannover.net. heise.de. 1622 IN NS ns.heise.de. ;; ADDITIONAL SECTION: ns.plusline.de. 265 IN A 212.19.48.14 ns.pop-hannover.de. 5113 IN A 193.98.1.200 ns2.pop-hannover.net. 15150 IN A 62.48.67.66 ;; Query time: 2 msec ;; SERVER: 193.200.112.80#53(193.200.112.80) ;; WHEN: Tue Oct 9 13:03:50 2012 ;; MSG SIZE rcvd: 216

  Read the article

• Website Upgrade - Avoid Downtime

  - by nolan.sipos

  I have been requested to investigate how I can reduce the downtime of our website upgrades. We maintain a DNN site with both public facing pages and member only pages. The member only pages are directly linked to our core application database while the public pages are not. Our current process is to redirect website users as soon as the upgrade process begins, which includes Backup of the Prod DB Update Prod DB Update Executables (Application) Upgrade Website Application (If this requires an update) Install Dependencies Upgrade sub systems like communication engine and payment broker Update various configuration files Perform testing of systems Restart all services Allow access to site This process can take from 2 to 8 hours depending on upgrade required, scripts to be run, size of database and number or portals. My initial thoughts are to restrict users to read only pages and any update pages would be unavailable. Could anyone please offer suggestions as to the best practices for what I would think to be a common problem so that we can reduce this down time and if we need infrastructure changes, I can put this to our technical department.

  Read the article

• how to best config for synflood setup in csf but web response still fast

  - by Binh Nguyen

  my server down random every day 4-5 time cause get high load very quick.. I have install csf and with some config server now stable.. load around 5. BUT the big isuse is : the real user very hard to access website specially from IE browser you can test at xaluan.com the flowing is config using in csf: SYNFLOOD = "1" SYNFLOOD_RATE = "100/s" SYNFLOOD_BURST = "10" CONNLIMIT = "80;30" PORTFLOOD = "80;tcp;70;5" CT_LIMIT = "29" # other config may same as default i playing around with this config for a week but still not work around.. If increase the rate SYNFLOOD_RATE = "140/s" or more.. the website response very fast.. be side have bad effect of server load increase so fast normal 20 and may be up to few hundred in peck time .. my need is response time fast but load still low.. please help thanks ps: server runing nginx frontend, apache, mysql, php ,, the home page has around 70 elements which will cached in browser in fist time access..

  Read the article

• deploy LAMP config to new boxes with low/no effort

  - by user1444233

  I'm spending a lot of time setting up new Centos 6 instances. I use a VCS (Subversion) for most of the config files and all of the webapp source files (Github), but even with excellent package managers (like yum, npm, easy_install, etc.) it still takes time. I'd like to get to the point where I could try out a new potential web host by just signing up for an account, logging in and automatically sucking my standardised config onto the box. I know there are a set of tools that can help: Puppet Chef Vagrant and a set of services that sell solutions: [Jumpbox] http://www.jumpbox.com/ [BitNami Cloud] http://bitnami.org/cloud I don't mind investing time in learning a new tool, but as a no-budget start-up, I'm keen to keep monthly costs down. My biggest concern is that time spent on the server config is time away from the codebase, and that's where I think my team and I should be investing our energy, at least until we get funded and scale up a bit. I'd be grateful of some recommendations for which way to jump on config: stick with SSH and manual deploys, at least until you get big. bite the bullet and learn [say] puppet. You may only use it 8-10 times, but it pays to have such an easy tunable server bootstrap. don't bother, just pay the $100/month for a standard config service. It'll cost you $1000/year, but you should focus on the code. Other questions in this domain I use quite a complex stack (Drupal, Zend Server, MySQL, PHP, MongoDB, Python, django), but are there standard(ish) setups that include these or that I could build upon more quickly? Are the configs optimised for small, medium, large VPS (1GB, 4GB, 16GB)? How secure are they?

  Read the article

• Unable to resolve hostname on a proxy network

  - by ali

  I can browse sites using firefox configured with proxy 172.1.6.0.6:3128 resolv.conf domain pudhcp.ac.in search pudhcp.ac.in nameserver 172.16.0.7 I checked with Windows and I found the same DNS server settings 127.0.0.1 bt 127.0.1.1 bt Above is the hosts file I modified the top line from localhost to bt still not working bt is the hostname Still I can't ping to google.com - it is showing unable to resolv hostname I tried all solutions,I guess proxy is used even for DNS resolution root@bt:~# dhclient There is already a pid file /var/run/dhclient.pid with pid 7157 killed old client process, removed PID file Internet Systems Consortium DHCP Client V3.1.1 Copyright 2004-2008 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/sw/dhcp/ Listening on LPF/eth1/5c:ac:4c:b1:0c:7c Sending on LPF/eth1/5c:ac:4c:b1:0c:7c Listening on LPF/eth0/60:eb:69:18:4d:3d Sending on LPF/eth0/60:eb:69:18:4d:3d Sending on Socket/fallback DHCPREQUEST of 172.16.6.87 on eth0 to 255.255.255.255 port 67 DHCPACK of 172.16.6.87 from 172.16.6.1 bound to 172.16.6.87 -- renewal in 79432 seconds.

  Read the article

• How can I do an SELINUX filesystem relabel without rebooting first?

  - by Skaperen

  I can touch the file /.autorelabel and reboot and during the initialization coming back up it will do the SELINUX relabel for me. But I want to do this in a different situation where the system has just been copied to a hard drive image. I can chroot to the originating file tree, or chroot to the just populated device image and run it. I just can't find anything that says what to be run. This image is being made into an AMI on AWS EC2, and contains CentOS 6.3. But the time it takes to relabel is too long (6 minutes or more). I want to move the relabel to the image build where the extra time is not an issue (because it happens once instead of every time an AMI is launched). I can make this relabel be the very last thing just before the filesystem is unmounted for the last time until it becomes an AMI and will launch. I just need to know what to call to do it. I have searched man pages with no luck. I have searched system init scripts but where /.autorelabel is detected, it is unclear what is happening. Documents like http://www.centos.org/docs/5/html/5.2/Deployment_Guide/sec-sel-fsrelabel.html only tell how to do things that still really do the work after a reboot. I need to have the work doing BEFORE the "reboot" (unmount, build AMI, and launch ready to go). The big point is ... yes there will be a reboot ... but I want the relabel work to be done before that so it won't be done every time an AMI is launched (because it takes so long).

  Read the article

< Previous Page | 320 321 322 323 324 325 326 327 328 329 330 331  | Next Page >