Search Results

Search found 21644 results on 866 pages for 'connection speed'.

Page 325/866 | < Previous Page | 321 322 323 324 325 326 327 328 329 330 331 332  | Next Page >

• Route a specific user's traffic via VPN but still allow local networking

  - by wbg

  So, I want to route certain traffic via a VPN connection and the rest via my normal Internet connection. I want to run several different programs and most of them don't support binding to a specific network interface (tun0 in my case). I've managed to send a specific user's traffic via the VPN following the answers given here: iptables - Target to route packet to specific interface? But unfortunately, when I run a server that connects to the Internet and has a web interface running on a local IP (127.0.0.1/192.168.0.*), all the Internet traffic correctly goes via tun0, but I'm unable to connect to the web interface from a local IP as a different user. When I log in as the VPN-ified user, I can access services running on local IPs, but other users/machines can't access any servers I start. Can anyone point me in the right direction?

  Read the article

• nat with iptables, re-connecting fail within about 3 minutes

  - by xpu

  i constructed a nat with iptables, as following: echo 1 > /proc/sys/net/ipv4/ip_forward iptables -t nat -I PREROUTING -p tcp --dport 9000 -j DNAT --to xx.xx.xx.xx iptables -t nat -I POSTROUTING -p tcp --dport 9000 -j MASQUERADE service iptables save service iptables restart the configuration worked fine, but there was a problem when i disconnected and tried to reconnect again, connection will be refused within about 2~3 minutes, after that, things go fine again. what was the problem? how do i make it to accept new connection after the old one break?

  Read the article

• How SmartDNS Works

  - by Emad

  If you travel outside the US you'll notice that most of the streaming services like Netflix, Pandora, hulu etc are blocked, usually by the service providers themselves. To get around that, people use VPN services. They basically tunnel your traffic through a US server so your requests seem like they are originating in the US. These VPN services fix this blocking problem, but make your connection slower than the normal unVPNed connection. Recently however I've come across something called SmartDNS provided by overplay.net. You pay $5 a month and you get access to their DNS servers. After you change to their DNS you get access to the blocked streaming sites, without slowing down your normal traffic like email and browsing. What I'd like to know is the technical details of how this SmartDNS works. I've done some quick research but that didn't turn up anything of substance. Anybody out there knows?

  Read the article

• Sharing VPN access between two computers on the LAN

  - by Axelle Ziegler

  I have VPN access to several machines in my office from my home machine. I'd like to be able to access those machines from another computer on my LAN, without setuping a second VPN access. Both computers are Windows 7 machines. Is there a way for my "main" computer to share its VPN access to another machine on the LAN? How would one setup this share? I don't think "simple" Internet connection sharing fits my needs because: My LAN already has its own DHCP/Router to access the Internet, and I'd like to keep it this way I can't access the Internet through my VPN connection

  Read the article

• IIS FTP server not working after purchase of SSL certificate

  - by Chris

  I've been connecting to my web server with active mode in FileZilla with no problems. Over the weekend, an SSL certificate was dropped into a folder that I access with FTP, and which contains files for the website. Now I am receiving a 425 error in active mode on the FTP root, so I can't really do anything but log in. In passive mode, I can connect and move around in the directory tree, but the connection seems shaky. Occasionally I'll time out, and I can't get access at all to the folder containing the SSL certificate. My question is how does the SSL certificate affect my FTP connection (if at all)? Does its presence demand the use of FTP over SSL? Note: As far as I know, the only change which occurred was the placement of the SSL certificate. Firewall settings, FTP client and server settings should all be the same as before, when everything was working.

  Read the article

• How do I bridge connections in Debian?

  - by Josh

  In windows I can select Local Area Connection and Wireless Network Connection, right click and select Bridge Connections How can I achieve the same effect in Linux? (Debian to be exact) Pretty much I want Computer B to connect to Computer A via ethernet cable. Well Computer A is connected wirelessly. Allowing Computer B to get on the internet. == UPDATE == I've enabled IP forwarding and used the following iptables command: iptables -t nat -A POSTROUTING -o wlan0 -j MASQUERADE I'm still unable to access the internet from Computer B though.

  Read the article

• Firewall blocks FTP PASV response

  - by harper

  I have an FTP server that supports passive server mode (using PASV command). This works fine with Windows XP. When I want to access this server from Windows Vista or Windows 7 with firewall enabled I experience an immediate connection shutdown. A reset packet is sent to the server, and the socket is signaled that the server has reset the connection (which is not true). The problem disappears when the firewall is disabled. Connections to other FTP servers work correctly. The difference is that the server's response to PASV does not enclose the address field with parentheses. This is legal as documented in RFC-959 and RFC-1132. How can I configure the firewall to stop this bad behavior?

  Read the article

• Get name (address) of computer from which from which SSH login was made.

  - by amicitas

  After logging onto a linux machine via SSH, I would like to be able to retrieve the name of the computer from which the connection was made. Ideally I am looking for some command like hostname or uname but that would retrieve the name of the client instead of the host. This information must be accessible somewhere, since when I log on I get a message that contains the clinent name from the last login: Last login: Thu Mar 11 18:42:01 2010 from my.address.com The reason for wanting to do this is to be able to take different action in my .login file depending on which computer I am using for connection is from.

  Read the article

• 1K incoming http post requests per second, each with a 10-50K file

  - by Blankman

  I'm trying to figure out what kind of server setup I will need to support: 1K http post requests per second each post will contain a xml file between 5-50K (average of 25 kilobytes) Even if I get a 100 Mb/s connection with my dedicated box (they usually give 10 Mb/s but you can upgrade), from my calculations that is about 12K kb/s which means about 480 25kb files per second. So this means I need around 3 servers then, each with 100 Mb/s connection. Would a single server running HAProxy be able to redirect the requests to other servers or does this mean I need to get something else that can handle more than 100 Mb/s to proxy things out to the other servers? If my math is off I'd appreciate any corrections you may have.

  Read the article

• Use 2 wireless adapters to connect to 2 WIFI networks (local and internet) simultaneously?

  - by Mouad

  On my HP Compaq 6710b there's an internal WIFI network adapter. Attached to the same laptop there's also an external USB Alfa WIFI adapter. I live near campus and can pick it's WIFI signal. The problem is that when I am connected to the Internet Wifi using the internal adapter, and then connect to the home (non-internet) Wifi network's router, I lose the connection to the internet (it stays connected, but there's no actual connection). So how can I use the two adapters to connect to both networks successfully ? The router is Belkin N150 Enhanced Router Model F6D4230-4 V1 The external adapter is: ALFA AWUS 036NHR

  Read the article

• IPSec VPN IP addresses

  - by Randomblue

  I have an IPSec VPN on my Windows 7 machine (all using the native Windows 7 gateway). The host I am connecting to has different ISAKMP "Phase 1" and "Phase 2" IP addresses. As I understand, the Phase 1 address is that of the IPsec endpoint, to which I can connect just fine. The Phase 2 address is found in their "crypto map", and the addresses need to match. At the moment, both my Phase 1 and Phase 2 addresses are configured the same. On my side, I get the error "Error 791: The L2TP connection attempt failed because security policy for the connection was not found" How can I configure the Phase 2 IP address for my Windows 7 IPSec VPN to be different to the IPSec endpoint address?

  Read the article

• Route gaming data over wireless and everything else through LAN?

  - by Alex

  I have two internet connections available to me. One is via LAN.. not a great ping, but fast downloads. The other is via USB wireless adapter.. good ping, but slow downloads. I want to connect to both of them simultaneously. I want to be able to specify which data or application will use the wireless connection and route everything else through the lan connection. Is this possible, and how would I do it? Windows 7 x64 is my operating system. Here is the data from route print: http://pastebin.com/vsjQRpSM I'm still unsure of how to use this to make all of my data go through the nvidia lan interface, even after reading route /? Also, if I'm able to achieve that, will it override the ForceBindIP?

  Read the article

• Error 800 while connecting to VPN

  - by Aamir

  I am trying to connect to my office network through VPN. It used to work fine earlier but now as soon as I hit connect, I get Error 800: Error 800: Unable to establish VPN Connection. The VPN server may be unreachable, or security parameters may not be configured properly for this connection. I am using Windows XP and I am able to ping the VPN server successfully. I have Symantec Endpoint Protection installed (if it matters). I have tried disabling it as well but nothing changes.

  Read the article

• Network connectivity issue

  - by kubiej21

  I am a novice cisco user and I am trying to investigate as to why one of our connections went down. We have a fiber network ring that is operating just fine. Connected to this ring via ethernet, is a lone 3560. This connection has worked flawlessly for the past year and a half. This morning, I noticed that I could not connect to that remote switch. I checked the configurations on both switches, and nothing has changed (as I expected). In the field, the port lights were flashing, indicating that some sort of communication is occurring. There is only 1 ethernet cable that has been run between these two locations, so testing an alternate path is not possible. What else can I do to fix this connection?

  Read the article

• Random TCP Resets

  - by allenwei

  We got randomly TCP "reset" error when we send request to remote server. Log from remote server Cisco TCP Connection Terminated,Nov 05 14:43:39 EST: %ASA-session-6-302014: Teardown TCP connection 640068283 for Outside:xxxx to xxxx duration 0:00:00 bytes 4160 TCP Reset-O One my local machine I saw when I use netstat 100703 connections reset due to unexpected data 324186 connections reset due to early user close I also use tcpdump to see what's wrong with it, I saw xxxx.https: Flags [R.], seq 290, ack 1369, win 136, options [nop,nop,TS val 2871790533 ecr 1897173283], length 0 The problem just happened today, we didn't change anything on our server. Anyone know what's wrong with it? Is it related to code we wrote send out request or related to linux configuration?

  Read the article

• Hardware recommendations for building an Ubuntu encrypted file server

  - by Robert Mashlan

  I would like to build a file server for my home network using Ubuntu. It will serve files from RAID1 configured disks, either in the OS or in hardware. It will be connected to a Gigabit ethernet LAN. The disks will use an encrypted file system. It will serve samba shares. I would like a recommendation on what kind of processing power/memory I would need to build a box that would be able to sustain the full capacity of the Gigabit ethernet connection in a file transfer for a single connection with the overhead of serving from an encrypted disk. I'm not looking to build a dream server, I just want enough processing capacity for high performance (and reliable) file sharing and spend as little as possible for it. This may be tangential, but what kind of hardware would I need to have a server be able to reliably go into a low power mode when no requests are being made of it?

  Read the article

• Allow Internet Access with Default Gateway on Windows 7 VPN Server

  - by Hakoda

  I have a Windows 7 box at home (which I'll refer to as Home-VPN) that runs a simple PPTP VPN server. I have a range of 2 IP address (192.168.1.10-192.168.1.11) to give out, although the server is only able to give out one concurrent connection. Ports 1723 & 47 are correctly forwarded to the server. IPv6 is disabled on both Home-VPN and the client. I setup Home-VPN just like this Youtube video: http://www.youtube.com/watch?v=1s5JxMG06L4 I can connect to it just fine but I can't access the Internet when connected to Home-VPN, all outside web servers (eg. google.com, mozilla.org, apple.com) are unreachable. I know I can uncheck "Use Default Gateway on Remote Servers" on the client side under IPv4 settings but that will route all my traffic through my current connection, rather than through the VPN, defeating the purpose of said VPN. Any ideas on how I can fix this?

  Read the article

• Persistent retrying resuming downloads with curl

  - by Svish

  I'm on a mac and have a list of files I would like to download from an ftp server. The connection is a bit buggy so I want it to retry and resume if connection is dropped. I know I can do this with wget, but unfortunately Mac OS X doesn't come with wget. I could install it, but to do that (unless I have missed something) I need to install XCode and MacPorts first, which I would like to avoid. Curl is available though it seems, but I don't know how that works or how to use it really. If I have a list of files in a text file (one full path per line, like ftp://user:pass@server/dir/file1) how can I use curl to download all those files? And can I get curl to never give up? Like, retry infinitely and resume downloads where it left off and such?

  Read the article

• Netgear routers don't allow you to disable wireless admin??

  - by MousePad

  I just bought a new router, the NetGear WGR614. Nowhere in the settings can you disable the ability to administrate the router from a wireless connection, which opens it up to brute force attacks from outside the building. Furthermore, it doesn't require a direct connection to the router to admin either, you can admin it while you're connected to the Internet. This means it opens itself to the possibility of an attack from within the network. This is unbelievable to me. What am I missing? Can this be possible?

  Read the article

• How setup federated SQL data to display limited information to a Web server in the DMZ?

  - by Pcav

  I have a SQL server behind a firewall. I need to push some limited SQL 2005 information to a Web Server in the DMZ so that I do not have to let database queries come all the way into the database server on our internal network. I want to push a small amount of dynamic data to a Web server in the DMZ and lock it down so that our hosted website does not need to come into the internal network for information; I want to put a server in the DMZ that will be the only connection allowed to the SQL database. This DMZ server will be the only server that can have any sort of connection to the back-end database so the hosting provider just pull the data from our server in the DMZ...

  Read the article

• Network Bypass - PC Registration Page - I'm trying to bypass a college Registration Page so I can ac

  - by Kamron3

  What I'm trying to do: Connect to the internet without registering But! Here's my problem: I can't connect. I used to be able to, now when I try to connect it says "Server not found." I can connect just fine on my other Laptop. I did a test as well. I used a LAN USB adapter and could connect fine, then now I can't connect again. Possibly because I am using uTorrent to download stuff, but I want to connect again Is there anyway I can use some sort of "virtual adapter"-type of connection where it masks my actual adapter? How can I connect to the connection without having to buy more and more Network USB Adapters? Thanks much!

  Read the article

• Code-First Database Creation During TFS 2010 CI Build

  - by jedimindtrickster

  I would like to automate code-first database generation during the automated CI build of a web project in Team Foundation Server 2010. When run locally the tests create a code-first database specified by the connection string in the app.config of the tests project. How do I configure the TFS Build Configuration to mimic this behaviour on the TFS build server? Edit The problem, it turns out, was that the TFS build server was successfully running the test which was using the default connection string in the app.config which pointed to the local SQL Server, not where I expected it. The solution was to use SlowCheetah on the TFS server as a means to transform the App.config file using the QA transform as per this blog article.

  Read the article

• "The network path was not found" - shortening the delay before Windows tries again

  - by Harry Johnston

  If I try to connect (over Windows file sharing) to a machine that has gone to sleep, I get a timeout followed by "The network path was not found". If I then wake the machine and try again, I still get "The network path was not found" because the connection failure has been cached. If I wait a while (about 30 seconds?) and then try again I can connect successfully. I understand this behaviour. My question is: is there any way to shorten the delay before I can try the connection again?

  Read the article

• Why do I get a PHP 5.2.6 segmentation fault when using PDO_SQlite?

  - by danieltalsky

  This is an installation on ModWest's shared hosting. I have enabled both PDO and PDO_sqlite on the server and phpinfo() verifies both are running. When I access PDO itself, I'm fine, and getting a meaningful error. <?php $dbh = new PDO(""); ?> This gives me an "Invalid Connection String" error. But, as soon as I begin a connection string with sqlite:, I get a total crash. When I run via the webserver, I'm seeing NO error. When I enter a nonexistant filename, PHP does indeed create the file. I tried running the constructor via CLI and there I do get a simple error: Segmentation Fault I'm not seeing ANYTHING in the PHP 5.2.6 changelogs about this bug. Anyone have any additional troubleshooting steps? The OS is Debian 5.0.4

  Read the article

• Redirect all ports to my server in a simple way

  - by Dorian

  I have a server with SSH access (on port 22 and 443). My ISP block everything except ports 80 and 443. I there a simple way to make everything go to my server (via SSH) then return the response via the same SSH connection, but in a way I can use all the ports in my client. Like : Me ? SSH connection ? My server ? request ? Server ? My server ? Me It's like a VPN but I don't have any port available for a VPN (443 is already taken by SSH).

  Read the article

< Previous Page | 321 322 323 324 325 326 327 328 329 330 331 332  | Next Page >