named constructor - Page 325

What's the fastest lookup algorithm for a pair data structure (i.e, a map)?

- by truncheon

In the following example a std::map structure is filled with 26 values from A - Z (for key) and 0 – 26 for value. The time taken (on my system) to lookup the last entry (10000000 times) is roughly 250 ms for the vector, and 125 ms for the map. (I compiled using release mode, with O3 option turned on for g++ 4.4) But if for some odd reason I wanted better performance than the std::map, what data structures and functions would I need to consider using? I apologize if the answer seems obvious to you, but I haven't had much experience in the performance critical aspects of C++ programming. UPDATE: This example is rather trivial and hides the true complexity of what I'm trying to achieve. My real world project is a simple scripting language that uses a parser, data tree, and interpreter (instead of a VM stack system). I need to use some kind of data structure (perhaps map) to store the variables names created by script programmers. These are likely to be pretty randomly named, so I need a lookup method that can quickly find a particular key within a (probably) fairly large list of names. #include <ctime> #include <map> #include <vector> #include <iostream> struct mystruct { char key; int value; mystruct(char k = 0, int v = 0) : key(k), value(v) { } }; int find(const std::vector<mystruct>& ref, char key) { for (std::vector<mystruct>::const_iterator i = ref.begin(); i != ref.end(); ++i) if (i->key == key) return i->value; return -1; } int main() { std::map<char, int> mymap; std::vector<mystruct> myvec; for (int i = 'a'; i < 'a' + 26; ++i) { mymap[i] = i - 'a'; myvec.push_back(mystruct(i, i - 'a')); } int pre = clock(); for (int i = 0; i < 10000000; ++i) { find(myvec, 'z'); } std::cout << "linear scan: milli " << clock() - pre << "\n"; pre = clock(); for (int i = 0; i < 10000000; ++i) { mymap['z']; } std::cout << "map scan: milli " << clock() - pre << "\n"; return 0; }

Read the article

Jquery / PhP / Joomla Select one of two comboboxes does not get updated

- by bluesbrother

I am making a Joomla component wich has 3 comboboxes/selects on the page. One with languages and 2 with subjects. If you change the language the other two get filled with the same data (the subjects in the selected language) the name of the selectbox are different but otherwise the same. I get an error for one of the subject boxes (hence the url gets red), but there is no logic in wich one will give an error. In Firebug i get the HTML back for the one without the other and this one gets updated but the other one gives nothing back. If i right click in firebug on the one that gave the error, and do "send again" it will load fine. Is their a timing problem? The change event of the language selectbox: jQuery('#cmbldcoi_ldlink_language').bind('change', function() { var cmbLangID = jQuery('#cmbldcoi_ldlink_language').val(); if (cmbLangID !=0) { getSubjectCmb_lang(cmbLangID, 'cmbldcoi_ldlink_subjects', '#ldlinksubjects'); } }); Function that requests the php file to create the html for the select: function getSubjectCmb_lang(langID, cmbName, DivWhereIn) { var xdate = new Date().getTime(); var url = 'index.php?option=com_ldadmin&view=ldadmin&format=raw&task=getcmbsubj_lang&langid=' + langID + '&cmbname=' + cmbName + '&'+ xdate; jQuery(DivWhereIn).load(url, function(){ }); } And in the php file there is a connection made to the database to ge the information to build the selectbox. I use a function for this that is okay because it makes al my selectboxes. The only place where there are problems with select boxes is on the pages that has 2 selects that need to change when a third one changed. My guess it is somewhere in the Jquery where this goes wrong. And i think it has to do with timing. But i am open for all sugestions. Thanx. UPDATE: No the ID and Name fields are different. They are named : cmbldcoi_child cmbldcoi_parent Here is my code: The change event for the first combobox which makes the other two change: jQuery('#cmbldcoi_language_chain_subj').bind('change', function(){ var langID = jQuery('#cmbldcoi_language_chain_subj').val(); if (langID != 0){ getSubjectCmb_lang(langID, 'cmbldcoi_child', '#div_cmbldcoi_child'); getSubjectCmb_lang(langID, 'cmbldcoi_parent', '#div_cmbldcoi_parent'); } }); } The function wicht calls the php file to get the info from the database: function getSubjectCmb_lang(langID, cmbName, DivWhereIn){ var xdate = new Date().getTime(); var url = 'index.php?option=com_ldadmin&view=ldadmin&format=raw&task=getcmbsubj_lang&langid=' + langID + '&cmbname=' + cmbName + '&'+ xdate; jQuery(DivWhereIn).load(url, function(){ }); } The PHP code function getcmbsubj_lang(){ $langid = JRequest::getVar('langid'); if ($langid > 0 ){ $langid = JRequest::getVar('langid'); }else{ $langid = 1; } $cmbName = JRequest::getVar('cmbname'); //$lang_sufx = self::get_#__sufx($langid); print ld_html::ld_create_cmb_html($cmbName, '#__ldcoi_subjects','id', 'subject_name', " WHERE id_language={$langid} ORDER BY subject_name" ); } There is a class wich is called ld_html wich has an funnction in it that creates a combobox. ld_html::ld_create_cmb_html() It gets an table name, id field, namefield and optional an where clause. It all works fine if there is just one combobox thats needs updating. It give a problem when there are two. Thanks for the help !

Read the article

replaceAll() method using parameter from text file

- by Herman Plani Ginting

i have a collection of raw text in a table in database, i need to replace some words in this collection using a set of words. i put all the term to be replace and its substitutes in a text file as below min=admin lelet=lambat lemot=lambat nii=nih ntu=itu and so on. i have successfully initiate a variabel of File and Scanner to read the collection of the term and its substitutes. i loop all the dataset and save the raw text in a string in the same loop i loop all the term collection and save its row to a string name 'pattern', and split the pattern into two string named 'term' and 'replacer' in this loop i initiate a new string which its value is the string from the dataset modified by replaceAll(term,replacer) end loop for term collection then i insert the new string to another table in database end loop for dataset i do it manualy as below replaceAll("min","admin") and its works but its really something to code it manually for almost 2000 terms to be replace it. anyone ever face this kind of really something.. i really need a help now desperate :( package sentimenrepo; import javax.swing.*; import java.sql.*; import java.io.*; //import java.util.HashMap; import java.util.Scanner; //import java.util.Map; /** * * @author herman */ public class synonimReplaceV2 extends SwingWorker { protected Object doInBackground() throws Exception { new skripsisentimen.sentimenttwitter().setVisible(true); Integer row = 0; File synonimV2 = new File("synV2/catatan_kata_sinonim.txt"); String newTweet = ""; DB db = new DB(); Connection conn = db.dbConnect("jdbc:mysql://localhost:3306/tweet", "root", ""); try{ Statement select = conn.createStatement(); select.executeQuery("select * from synonimtweet"); ResultSet RS = select.getResultSet(); Scanner scSynV2 = new Scanner(synonimV2); while(RS.next()){ row++; String no = RS.getString("no"); String tweet = " "+ RS.getString("tweet"); String published = RS.getString("published"); String label = RS.getString("label"); clean2 cleanv2 = new clean2(); newTweet = cleanv2.cleanTweet(tweet); try{ Statement insert = conn.createStatement(); insert.executeUpdate("INSERT INTO synonimtweet_v2(no,tweet,published,label) values('" +no+"','"+newTweet+"','"+published+"','"+label+"')"); String current = skripsisentimen.sentimenttwitter.txtAreaResult.getText(); skripsisentimen.sentimenttwitter.txtAreaResult.setText(current+"\n"+row+"original : "+tweet+"\n"+newTweet+"\n______________________\n"); skripsisentimen.sentimenttwitter.lblStat.setText(row+" tweet read"); skripsisentimen.sentimenttwitter.txtAreaResult.setCaretPosition(skripsisentimen.sentimenttwitter.txtAreaResult.getText().length() - 1); }catch(Exception e){ skripsisentimen.sentimenttwitter.lblStat.setText(e.getMessage()); } skripsisentimen.sentimenttwitter.lblStat.setText(e.getMessage()); } }catch(Exception e){ skripsisentimen.sentimenttwitter.lblStat.setText(e.getMessage()); } return row; } class clean2{ public clean2(){} public String cleanTweet(String tweet){ File synonimV2 = new File("synV2/catatan_kata_sinonim.txt"); String pattern = ""; String term = ""; String replacer = ""; String newTweet=""; try{ Scanner scSynV2 = new Scanner(synonimV2); while(scSynV2.hasNext()){ pattern = scSynV2.next(); term = pattern.split("=")[0]; replacer = pattern.split("=")[1]; newTweet = tweet.replace(term, replacer); } }catch(Exception e){ e.printStackTrace(); } System.out.println(newTweet+"\n"+tweet); return newTweet; } } }

Read the article

Delphi: EReadError with message ‘Property PageNr does Not Exist’.

- by lyborko

Hi, I get SOMETIMES error message: EReadError with message 'Property PageNr does Not exist', when I try to run my own project. I am really desperate, because I see simply nothing what is the cause. The devilish is that it comes up sometimes but often. It concerns of my own component TPage. Here is declaration TPage = class(TCustomControl) // private FPaperHeight, FPaperWidth:Integer; FPaperBrush:TBrush; FPaperSize:TPaperSize; FPaperOrientation:TPaperOrientation; FPDFDocument: TPDFDocument; FPageNr:integer; procedure PaintBasicLayout; procedure PaintInterior; procedure SetPapersize(Value: TPapersize); procedure SetPaperHeight(Value: Integer); procedure SetPaperWidth(Value: Integer); procedure SetPaperOrientation(value:TPaperOrientation); procedure SetPaperBrush(Value:TBrush); procedure SetPageNr(Value:Integer); protected procedure CreateParams(var Params:TCreateParams); override; procedure AdjustClientRect(var Rect: TRect); override; public constructor Create(AOwner: TComponent);override; destructor Destroy;override; // function GetChildOwner:TComponent; override; procedure DrawControl(X,Y :integer; Dx,Dy:Double; Ctrl:TControl;NewCanvas:TCanvas); // procedure GetChildren(Proc:TGetChildProc; Root:TComponent); override; procedure Loaded; override; procedure MouseDown(Button: TMouseButton; Shift: TShiftState; X, Y: Integer); override; procedure Paint; override; procedure PrintOnCanvas(X,Y:integer; rX,rY:Double; ACanvas:TCanvas); procedure PrintOnPDFCanvas(X,Y:integer); procedure PrintOnPrinterCanvas(X,Y:integer); procedure Resize; override; procedure SetPrintKind(APrintKind:TPrintKind; APrintGroupindex:Integer); published property PageNr:integer read FPageNr write SetPageNr; property PaperBrush: TBrush read FPaperBrush write SetPaperBrush; property PaperHeight: integer read FPaperHeight write SetPaperHeight; property PaperWidth: integer read FPaperWidth write SetPaperWidth; property PaperSize: TPaperSize read FPaperSize write SetPaperSize; property PaperOrientation:TPaperOrientation read FPaperOrientation write SetPaperOrientation; property PDFDocument:TPDFDocument read FPDFDocument write FPDFDocument; property TabOrder; end; I thoroughly read the similar topic depicted here: Delphi: EReadError with message 'Property Persistence does Not exist' But here it is my own source code. No third party. Interesting: when I delete PageNr property in my dfm file (unit1.dfm), then pops up : EReadError with message 'Property PaperHeight does Not exist'. when I delete PaperHeight then it will claim PaperWidth and so on... Here is piece of dfm file: object pg1: TPage Left = 128 Top = 144 Width = 798 Height = 1127 PageNr = 0 PaperHeight = 1123 PaperWidth = 794 PaperSize = psA4 PaperOrientation = poPortrait TabOrder = 0 object bscshp4: TBasicShape Left = 112 Top = 64 Width = 105 Height = 105 PrintKind = pkNormal PrintGroupIndex = 0 Zooming = 100 Transparent = False Repeating = False PageRepeatOffset = 1 ShapeStyle = ssVertical LinePosition = 2 end object bscshp5: TBasicShape Left = 288 Top = 24 Width = 105 Height = 105 PrintKind = pkNormal PrintGroupIndex = 0 Zooming = 100 Transparent = False What the hell happens ??????? I have never seen that. I compiled the unit several times... Encoutered no problem. Maybe the cause is beyond this. I feel completely powerless.

Read the article

How can i clear a SQLite database each time i start my app

- by AndroidUser99

Hi, i want that each time i start my app my SQLite database get's cleaned for this, i need to make a method on my class MyDBAdapter.java code examples are welcome, i have no idea how to do it this is the dbadapter/helper i'm using: public class MyDbAdapter { private static final String TAG = "NotesDbAdapter"; private DatabaseHelper mDbHelper; private SQLiteDatabase mDb; private static final String DATABASE_NAME = "gpslocdb"; private static final String PERMISSION_TABLE_CREATE = "CREATE TABLE permission ( fk_email1 varchar, fk_email2 varchar, validated tinyint, hour1 time default '08:00:00', hour2 time default '20:00:00', date1 date, date2 date, weekend tinyint default '0', fk_type varchar, PRIMARY KEY (fk_email1,fk_email2))"; private static final String USER_TABLE_CREATE = "CREATE TABLE user ( email varchar, password varchar, fullName varchar, mobilePhone varchar, mobileOperatingSystem varchar, PRIMARY KEY (email))"; private static final int DATABASE_VERSION = 2; private final Context mCtx; private static class DatabaseHelper extends SQLiteOpenHelper { DatabaseHelper(Context context) { super(context, DATABASE_NAME, null, DATABASE_VERSION); } @Override public void onCreate(SQLiteDatabase db) { db.execSQL(PERMISSION_TABLE_CREATE); db.execSQL(USER_TABLE_CREATE); } @Override public void onUpgrade(SQLiteDatabase db, int oldVersion, int newVersion) { db.execSQL("DROP TABLE IF EXISTS user"); db.execSQL("DROP TABLE IF EXISTS permission"); onCreate(db); } } /** * Constructor - takes the context to allow the database to be * opened/created * * @param ctx the Context within which to work */ public MyDbAdapter(Context ctx) { this.mCtx = ctx; } /** * Open the database. If it cannot be opened, try to create a new * instance of the database. If it cannot be created, throw an exception to * signal the failure * * @return this (self reference, allowing this to be chained in an * initialization call) * @throws SQLException if the database could be neither opened or created */ public MyDbAdapter open() throws SQLException { mDbHelper = new DatabaseHelper(mCtx); mDb = mDbHelper.getWritableDatabase(); return this; } public void close() { mDbHelper.close(); } public long createUser(String email, String password, String fullName, String mobilePhone, String mobileOperatingSystem) { ContentValues initialValues = new ContentValues(); initialValues.put("email",email); initialValues.put("password",password); initialValues.put("fullName",fullName); initialValues.put("mobilePhone",mobilePhone); initialValues.put("mobileOperatingSystem",mobileOperatingSystem); return mDb.insert("user", null, initialValues); } public Cursor fetchAllUsers() { return mDb.query("user", new String[] {"email", "password", "fullName", "mobilePhone", "mobileOperatingSystem"}, null, null, null, null, null); } public Cursor fetchUser(String email) throws SQLException { Cursor mCursor = mDb.query(true, "user", new String[] {"email", "password", "fullName", "mobilePhone", "mobileOperatingSystem"} , "email" + "=" + email, null, null, null, null, null); if (mCursor != null) { mCursor.moveToFirst(); } return mCursor; } public List<Friend> retrieveAllUsers() { List <Friend> friends=new ArrayList<Friend>(); Cursor result=fetchAllUsers(); if( result.moveToFirst() ){ do{ //note.getString(note.getColumnIndexOrThrow(NotesDbAdapter.KEY_TITLE))); friends.add(new Friend(result.getString(result.getColumnIndexOrThrow("email")), "","","","")); }while( result.moveToNext() ); } return friends; } }

Read the article

Please clarify how create/update happens against child entities of an aggregate root

- by christian

After much reading and thinking as I begin to get my head wrapped around DDD, I am a bit confused about the best practices for dealing with complex hierarchies under an aggregate root. I think this is a FAQ but after reading countless examples and discussions, no one is quite talking about the issue I'm seeing. If I am aligned with the DDD thinking, entities below the aggregate root should be immutable. This is the crux of my trouble, so if that isn't correct, that is why I'm lost. Here is a fabricated example...hope it holds enough water to discuss. Consider an automobile insurance policy (I'm not in insurance, but this matches the language I hear when on the phone w/ my insurance company). Policy is clearly an entity. Within the policy, let's say we have Auto. Auto, for the sake of this example, only exists within a policy (maybe you could transfer an Auto to another policy, so this is potential for an aggregate as well, which changes Policy...but assume it simpler than that for now). Since an Auto cannot exist without a Policy, I think it should be an Entity but not a root. So Policy in this case is an aggregate root. Now, to create a Policy, let's assume it has to have at least one auto. This is where I get frustrated. Assume Auto is fairly complex, including many fields and maybe a child for where it is garaged (a Location). If I understand correctly, a "create Policy" constructor/factory would have to take as input an Auto or be restricted via a builder to not be created without this Auto. And the Auto's creation, since it is an entity, can't be done beforehand (because it is immutable? maybe this is just an incorrect interpretation). So you don't get to say new Auto and then setX, setY, add(Z). If Auto is more than somewhat trivial, you end up having to build a huge hierarchy of builders and such to try to manage creating an Auto within the context of the Policy. One more twist to this is later, after the Policy is created and one wishes to add another Auto...or update an existing Auto. Clearly, the Policy controls this...fine...but Policy.addAuto() won't quite fly because one can't just pass in a new Auto (right!?). Examples say things like Policy.addAuto(VIN, make, model, etc.) but are all so simple that that looks reasonable. But if this factory method approach falls apart with too many parameters (the entire Auto interface, conceivably) I need a solution. From that point in my thinking, I'm realizing that having a transient reference to an entity is OK. So, maybe it is fine to have a entity created outside of its parent within the aggregate in a transient environment, so maybe it is OK to say something like: auto = AutoFactory.createAuto(); auto.setX auto.setY or if sticking to immutability, AutoBuilder.new().setX().setY().build() and then have it get sorted out when you say Policy.addAuto(auto) This insurance example gets more interesting if you add Events, such as an Accident with its PolicyReports or RepairEstimates...some value objects but most entities that are all really meaningless outside the policy...at least for my simple example. The lifecycle of Policy with its growing hierarchy over time seems the fundamental picture I must draw before really starting to dig in...and it is more the factory concept or how the child entities get built/attached to an aggregate root that I haven't seen a solid example of. I think I'm close. Hope this is clear and not just a repeat FAQ that has answers all over the place.

Read the article

Double Linked List header node keeps returning first value as 0

- by Craig

I will preface to say that this is my first question. I am currently getting my Masters degree in Information Security and I had to take C++ programming this semester. So this is homework related. I am not looking for you to answer my homework but I am running into a peculiar situation. I have created the program to work with a doubly linked list and everything works fine. However when I have the user create a list of values the first node keeps returning 0. I have tried finding some reading on this and I cannot locate any reference to it. My question is then is the header node(first node) always going to be zero? Or am I doing something wrong. case: 'C': cout<<"Please enter a list:"<<endl; while(n!=-999){ myList.insert(n); cin>> n;} break; I now enter: 12321, 1234,64564,346346. The results in 0, 12321, 1234, 64564,346346. Is this what should happen or am I doing something wrong? Also as this is my first post please feel free to criticize or teach me how to color code the keywords. Anyway this is a homework assignment so I am only looking for guidance and constructive criticism. Thank you all in advance So I cannot figure out the comment sections on this forum so I will edit the original post The first section is the constructor code: template <class Type> doublyLinkedList<Type>::doublyLinkedList() { first= NULL; last = NULL; count = 0; } Then there is my insert function : template <class Type> void doublyLinkedList<Type>::insert(const Type& insertItem) { nodeType<Type> *current; //pointer to traverse the list nodeType<Type> *trailCurrent; //pointer just before current nodeType<Type> *newNode; //pointer to create a node bool found; newNode = new nodeType<Type>; //create the node newNode->info = insertItem; //store the new item in the node newNode->next = NULL; newNode->back = NULL; if(first == NULL) //if the list is empty, newNode is //the only node { first = newNode; last = newNode; count++; } else { found = false; current = first; while (current != NULL && !found) //search the list if (current->info >= insertItem) found = true; else { trailCurrent = current; current = current->next; } if (current == first) //insert newNode before first { first->back = newNode; newNode->next = first; first = newNode; count++; } else { //insert newNode between trailCurrent and current if (current != NULL) { trailCurrent->next = newNode; newNode->back = trailCurrent; newNode->next = current; current->back = newNode; } else { trailCurrent->next = newNode; newNode->back = trailCurrent; last = newNode; } count++; }//end else }//end else }//end Then I have an initialization function too: template <class Type> void doublyLinkedList<Type>::initializeList() { destroy(); } Did I miss anything?

Read the article

Sqlite returns error

- by ruruma

I'm trying to implement loading data from database and put it into different views. But log cat returns error, that it cannot find "_id" column. Can somebody help me with this? SqlHelper Code public class FiboSqlHelper extends SQLiteOpenHelper { public static final String TABLE_FILMDB = "FiboFilmTop250"; public static final String COLUMN_ID = "_id"; private static final String DATABASE_NAME = "FiboFilmDb250.sqlite"; private static final int DATABASE_VERSION = 1; public static final String COLUMN_TITLE = "Title"; public static final String COLUMN_RATING = "Rating"; public static final String COLUMN_GENRE = "Genre"; public static final String COLUMN_TIME = "Time"; public static final String COLUMN_PREMDATE = "PremDate"; public static final String COLUMN_PLOT = "Plot"; private static final String DATABASE_CREATE = "create table "+TABLE_FILMDB+"("+COLUMN_ID +" integer primary key autoincrement, " +COLUMN_TITLE+" text not null "+COLUMN_RATING+" text not null "+COLUMN_GENRE+" text not null "+COLUMN_TIME+" text not null "+COLUMN_PREMDATE+" text not null "+COLUMN_PLOT+" "+"text not null)"; public FiboSqlHelper(Context context) { super(context, DATABASE_NAME, null, DATABASE_VERSION); // TODO Auto-generated constructor stub } @Override public void onCreate(SQLiteDatabase db) { // TODO Auto-generated method stub db.execSQL(DATABASE_CREATE); } @Override public void onUpgrade(SQLiteDatabase db, int oldVersion, int newVersion) { // TODO Auto-generated method stub Log.w(FiboSqlHelper.class.getName(), "Upgrading database from version " + oldVersion + " to " + newVersion + ", which will destroy all old data"); db.execSQL("DROP TABLE IF EXISTS " + TABLE_FILMDB); onCreate(db); } }` SqlAdapterCode: public class FiboSqlAdapter { private SQLiteDatabase database; private FiboSqlHelper dbHelper; private String[] allColumns = {FiboSqlHelper.COLUMN_ID, FiboSqlHelper.COLUMN_TITLE, FiboSqlHelper.COLUMN_GENRE, FiboSqlHelper.COLUMN_PREMDATE, FiboSqlHelper.COLUMN_TIME, FiboSqlHelper.COLUMN_PLOT}; public FiboSqlAdapter (Context context){ dbHelper = new FiboSqlHelper(context); } public void open() throws SQLException { database = dbHelper.getWritableDatabase(); } public void close(){ dbHelper.close(); } public List<FilmDataEntity> getAllFilmData(){ List<FilmDataEntity> fDatas = new ArrayList<FilmDataEntity>(); Cursor cursor = database.query(FiboSqlHelper.TABLE_FILMDB, allColumns, null,null,null,null,null); cursor.moveToFirst(); while(!cursor.isAfterLast()){ FilmDataEntity fData = cursorToData(cursor); fDatas.add(fData); cursor.moveToNext(); } cursor.close(); return fDatas; } private FilmDataEntity cursorToData(Cursor cursor){ FilmDataEntity fData = new FilmDataEntity(); fData.setId(cursor.getLong(1)); fData.setTitle(cursor.getString(2)); fData.setRating(cursor.getString(6)); fData.setGenre(cursor.getString(4)); fData.setPremDate(cursor.getString(5)); fData.setShortcut(cursor.getString(8)); return fData; }} DataEntity: ` public class FilmDataEntity { private long id; private String title; private String rating; private String genre; private String premDate; private String shortcut; public String getShortcut() { return shortcut; } public void setShortcut(String shortcut) { this.shortcut = shortcut; } public String getGenre() { return genre; } public void setGenre(String genre) { this.genre = genre; } public String getPremDate() { return premDate; } public void setPremDate(String premDate) { this.premDate = premDate; } public String getTitle() { return title; } public void setTitle(String title) { this.title = title; } public String getRating() { return rating; } public void setRating(String rating) { this.rating = rating; } public long getId() { return id; } public void setId(long id) { this.id = id; } } Part from main activity: `List<FilmDataEntity> fE1; sqA = new FiboSqlAdapter(this); sqA.open(); fE1 = sqA.getAllFilmData(); `

Read the article

C++ linked list based tree structure. Sanely copy nodes between lists.

- by krunk

edit Clafification: The intention is not to remove the node from the original list. But to create an identical node (data and children wise) to the original and insert that into the new list. In other words, a "move" does not imply a "remove" from the original. endedit The requirements: Each Node in the list must contain a reference to its previous sibling Each Node in the list must contain a reference to its next sibling Each Node may have a list of child nodes Each child Node must have a reference to its parent node Basically what we have is a tree structure of arbitrary depth and length. Something like: -root(NULL) --Node1 ----ChildNode1 ------ChildOfChild --------AnotherChild ----ChildNode2 --Node2 ----ChildNode1 ------ChildOfChild ----ChildNode2 ------ChildOfChild --Node3 ----ChildNode1 ----ChildNode2 Given any individual node, you need to be able to either traverse its siblings. the children, or up the tree to the root node. A Node ends up looking something like this: class Node { Node* previoius; Node* next; Node* child; Node* parent; } I have a container class that stores these and provides STL iterators. It performs your typical linked list accessors. So insertAfter looks like: void insertAfter(Node* after, Node* newNode) { Node* next = after->next; after->next = newNode; newNode->previous = after; next->previous = newNode; newNode->next = next; newNode->parent = after->parent; } That's the setup, now for the question. How would one move a node (and its children etc) to another list without leaving the previous list dangling? For example, if Node* myNode exists in ListOne and I want to append it to listTwo. Using pointers, listOne is left with a hole in its list since the next and previous pointers are changed. One solution is pass by value of the appended Node. So our insertAfter method would become: void insertAfter(Node* after, Node newNode); This seems like an awkward syntax. Another option is doing the copying internally, so you'd have: void insertAfter(Node* after, const Node* newNode) { Node *new_node = new Node(*newNode); Node* next = after->next; after->next = new_node; new_node->previous = after; next->previous = new_node; new_node->next = next; new_node->parent = after->parent; } Finally, you might create a moveNode method for moving and prevent raw insertion or appending of a node that already has been assigned siblings and parents. // default pointer value is 0 in constructor and a operator bool(..) // is defined for the Node bool isInList(const Node* node) const { return (node->previous || node->next || node->parent); } // then in insertAfter and friends if(isInList(newNode) // throw some error and bail I thought I'd toss this out there and see what folks came up with.

Read the article

SOAP Service Request C#

- by user3728352

I have this code that tries to send a request to a soap server, I'm new to soap so i am not sure if the terms i am using are correct or not please correct me I am wrong. Basically i am accessing a web service method named getUserDomain via soap request Here is the code: public void CallWebService() { var _url = "https://....com/QcXmlWebService/QcXmlWebService.asmx?wsdl"; var _action = "https://....com/QcXmlWebService/QcXmlWebService.asmx?op=GetUserDomains"; XmlDocument soapEnvelopeXml = CreateSoapEnvelope(); HttpWebRequest webRequest = CreateWebRequest(_url, _action); InsertSoapEnvelopeIntoWebRequest(soapEnvelopeXml, webRequest); webRequest.BeginGetResponse(null, null); // begin async call to web request. IAsyncResult asyncResult = webRequest.BeginGetResponse(null, null); // suspend this thread until call is complete. You might want to // do something usefull here like update your UI. asyncResult.AsyncWaitHandle.WaitOne(); // get the response from the completed web request. string soapResult; using (WebResponse webResponse = webRequest.EndGetResponse(asyncResult)) { using (StreamReader rd = new StreamReader(webResponse.GetResponseStream())) { soapResult = rd.ReadToEnd(); } Console.Write(soapResult); } } private HttpWebRequest CreateWebRequest(string url, string action) { HttpWebRequest webRequest = (HttpWebRequest)WebRequest.Create(url); webRequest.Headers.Add("SOAPAction", action); webRequest.ContentType = "text/xml;charset=\"utf-8\""; webRequest.Accept = "text/xml"; webRequest.Method = "POST"; return webRequest; } private XmlDocument CreateSoapEnvelope() { XmlDocument soapEnvelop = new XmlDocument(); string oRequest = ""; oRequest = @"<soap:Envelope xmlns:soap=""http://www.w3.org/2003/05/soap-envelope"" xmlns:qcx=""http://smething.com/QCXML"">"; oRequest = oRequest + "<soap:Header/>"; oRequest = oRequest + "<soap:Body>"; oRequest = oRequest + "<qcx:GetUserDomains>"; oRequest = oRequest + "<qcx:inputXml><![CDATA["; oRequest = oRequest + "<GetUserDomains>"; oRequest = oRequest + "<login>"; oRequest = oRequest + "<domain_name>MBB_BTS</domain_name>"; oRequest = oRequest + "<project_name>WCDMA_BTS_IV</project_name>"; oRequest = oRequest + "<user_name>user</user_name>"; oRequest = oRequest + "<password>pass</password>"; oRequest = oRequest + "</login>"; oRequest = oRequest + "</GetUserDomains>"; oRequest = oRequest + " ]]>"; oRequest = oRequest + "</qcx:inputXml>"; oRequest = oRequest + "</qcx:GetUserDomains>"; oRequest = oRequest + "</soap:Body>"; oRequest = oRequest + "</soap:Envelope>"; soapEnvelop.LoadXml(oRequest); return soapEnvelop; } private void InsertSoapEnvelopeIntoWebRequest(XmlDocument soapEnvelopeXml, HttpWebRequest webRequest) { using (Stream stream = webRequest.GetRequestStream()) { soapEnvelopeXml.Save(stream); } } This code i have seen somewhere in stack overflow before as an answer but i couldn't get it to work... The error im getting is threw exception System.net.webexception. the remote server returned an error :(500) internal server Thanks

Read the article

If I use a facade class with generic methods to access the JPA API, how should I provide additional processing for specific types?

- by Shaun

Let's say I'm making a fairly simple web application using JAVA EE specs (I've heard this is possible). In this app, I only have about 10 domain/data objects, and these are represented by JPA Entities. Architecturally, I would consider the JPA API to perform the role of a DAO. Of course, I don't want to use the EntityManager directly in my UI (JSF) and I need to manage transactions, so I delegate these tasks to the so-called service layer. More specifically, I would like to be able to handle these tasks in a single DataService class (often also called CrudService) with generic methods. See this article by Adam Bien for an example interface: http://www.adam-bien.com/roller/abien/entry/generic_crud_service_aka_dao My project differs from that article in that I can't use EJBs, so my service classes are essentially just named beans and I handle transactions manually. Regardless, what I want is a single interface for simple CRUD operations on my data objects because having a different class for each data type would lead to a lot of duplicate and/or unnecessary code. Ideally, my views would be able to use a method such as public <T> List<T> findAll(Class<T> type) { ... } to retrieve data. Using JSF, it might look something like this: <h:dataTable value="#{dataService.findAll(data.class)}" var="d"> ... </h:dataTable> Similarly, after validating forms, my controller could submit the data with a method such as: public <T> void add(T entity) { ... } Granted, you'd probably actually want to return something useful to the caller. In any case, this works well if your data can be treated as homogenous in this manner. Alas, it breaks down when you need to perform additional processing on certain objects before passing them on to JPA. For example, let's say I'm dealing with Books and Authors which have a many-to-many relationship. Each Book has a set of IDs referring to its authors, and each Author has a set of IDs referring to their books. Normally, JPA can manage this kind of relationship for you, but in some cases it can't (for example, the google app engine JPA provider doesn't support this). Thus, when I persist a new book for example, I may need to update the corresponding author entities. My question, then, is if there's an elegant way to handle this or if I should reconsider the sanity of my whole design. Here's a couple ways I see of dealing with it: The instanceof operator. I could use this to target certain classes when special processing is needed. Perhaps maintainability suffers and it isn't beautiful code, but if there's only 10 or so domain objects it can't be all that bad... could it? Make a different service for each entity type (ie, BookService and AuthorService). All services would inherit from a generic DataService base class and override methods if special processing is needed. At this point, you could probably also just call them DAOs instead. As always, I appreciate the help. Let me know if any clarifications are needed, as I left out many smaller details.

Read the article

Replacing innertext of XML node using PHP DOMDocument

- by Rohan Kumar

I want to replace innertext of a XML node my XML file named test.xml is <?xml version="1.0" encoding="utf-8"?> <ads> <loop>no</loop> <item> <description>Description 1</description> </item> <item> <description>Text in item2</description> </item> <item> <description>Let play with this XML</description> </item> </ads> I want to change the value of loop and description tag both, and it should be saved in test.xml like: <?xml version="1.0" encoding="utf-8"?> <ads> <loop>yes</loop> <item> <description>Description Changing Here</description> </item> <item> <description>Changing text in item2</description> </item> <item> <description>We will play later</description> </item> </ads> I tried code in PHP: <? $file = "test.xml"; $fp = fopen($file, "rb") or die("cannot open file"); $str = fread($fp, filesize($file)); $dom=new DOMDocument(); $dom->formatOutput = true; $dom->preserveWhiteSpace = false; $dom->loadXML($str) or die("Error"); //$dom->load("items.xml"); $root=$dom->documentElement; // This can differ (I am not sure, it can be only documentElement or documentElement->firstChild or only firstChild) $loop=$root->getElementsByTagName('loop')->item(0);//->textContent; //echo $loop; if(trim($loop->textContent)=='no') { echo 'ok'; $root->getElementsByTagName('loop')->item(0)->nodeValue ='yes'; } echo "<xmp>NEW:\n". $dom->saveXML() ."</xmp>"; ?> I tried only for loop tag.I don't know how to replace nodevalue in description tag. When I run this page it shows output like: ok NEW: <?xml version="1.0" encoding="utf-8"?> <ads> <loop>yes</loop> <item> <description>Description 1</description> </item> <item> <description>Changing text in item2</description> </item> <item> <description>Let play with this XML</description> </item> </ads> It gives the value yes in browser but don't save it in test.xml any reason?

Read the article

Problem in arranging contents of Class in JAVA

- by LuckySlevin

Hi, I have some classes and I'm trying to fill the objects of this class. Here is what i've tried. (Question is at the below) public class Team { private String clubName; private String preName; private ArrayList<String> branches; public Team(String clubName, String preName) { this.clubName = clubName; this.preName = preName; branches = new ArrayList<String>(); } public Team() { // TODO Auto-generated constructor stub } public String getClubName() { return clubName; } public String getPreName() { return preName; } public ArrayList<String> getBranches() { return branches; } public void setClubName(String clubName) { this.clubName = clubName; } public void setPreName(String preName) { this.preName = preName; } public void setBranches(ArrayList<String> branches) { this.branches = branches; } } public class Branch { private ArrayList<Player> players = new ArrayList<Player>(); String brName; public Branch() {} public void setBr(String brName){this.brName = brName;} public String getBr(){return brName;} public ArrayList<Player> getPlayers() { return players; } public void setPlayers(ArrayList<Player> players) { this.players = players; } } //TEST CLASS public class test { /** * @param args * @throws IOException */ public static void main(String[] args) throws IOException { String a,b,c; String q = "q"; int brCount = 0, tCount = 0; BufferedReader input = new BufferedReader(new InputStreamReader(System.in)); Team[] teams = new Team[30]; Branch[] myBranch = new Branch[30]; for(int z = 0 ; z <30 ;z++) { teams[z] = new Team(); myBranch[z] = new Branch(); } ArrayList<String> tmp = new ArrayList<String>(); int k = 0; int secim = Integer.parseInt(input.readLine()); while(secim != 0) { if(k!=0) secim = Integer.parseInt(input.readLine()); k++; switch(secim) { case 1 : brCount = 0; a = input.readLine(); teams[tCount].setClubName(a); b= input.readLine(); teams[tCount].setPreName(b); c = input.readLine(); while(c.equals(q) == false) { if(brCount != 0) {c = input.readLine();} if(c.equals(q)== false){ myBranch[brCount].brName = c; tmp.add(myBranch[brCount].brName); brCount++; } System.out.println(brCount); } teams[tCount].setBranches(tmp); for(int i=0;i<=tCount;i++ ){ System.out.print("a :" + teams[i].getClubName()+ " " + teams[i].getPreName()+ " "); System.out.println(teams[i].getBranches());} tCount++; break; case 2: String src = input.readLine();//LATERRRRRRRr } } } } The problem is one of my class elements. I have an arraylist as an element of a class. When i enter: AAA as preName BBB as clubName c d e as Branches Then as a second element www as preName GGG as clubName a b as branches The result is coming like: AAA BBB c,d,e,a,b GGG www c,d,e,a,b Which means ArrayList part of the class is putting it on and on. I tried to use clear() method but caused problems. Any ideas.

Read the article

C# How to output to GUI when data is coming via an interface via MarshalByRefObject?

- by Tom

Hey, can someone please show me how i can write the output of OnCreateFile to a GUI? I thought the GUI would have to be declared at the bottom in the main function, so how do i then refer to it within OnCreateFile? using System; using System.Collections.Generic; using System.Runtime.Remoting; using System.Text; using System.Diagnostics; using System.IO; using EasyHook; using System.Drawing; using System.Windows.Forms; namespace FileMon { public class FileMonInterface : MarshalByRefObject { public void IsInstalled(Int32 InClientPID) { //Console.WriteLine("FileMon has been installed in target {0}.\r\n", InClientPID); } public void OnCreateFile(Int32 InClientPID, String[] InFileNames) { for (int i = 0; i < InFileNames.Length; i++) { String[] s = InFileNames[i].ToString().Split('\t'); if (s[0].ToString().Contains("ROpen")) { //Console.WriteLine(DateTime.Now.Hour+":"+DateTime.Now.Minute+":"+DateTime.Now.Second+"."+DateTime.Now.Millisecond + "\t" + s[0] + "\t" + getProcessName(int.Parse(s[1])) + "\t" + getRootHive(s[2])); Program.ff.enterText(DateTime.Now.Hour + ":" + DateTime.Now.Minute + ":" + DateTime.Now.Second + "." + DateTime.Now.Millisecond + "\t" + s[0] + "\t" + getProcessName(int.Parse(s[1])) + "\t" + getRootHive(s[2])); } else if (s[0].ToString().Contains("RQuery")) { Console.WriteLine(DateTime.Now.Hour + ":" + DateTime.Now.Minute + ":" + DateTime.Now.Second + "." + DateTime.Now.Millisecond + "\t" + s[0] + "\t" + getProcessName(int.Parse(s[1])) + "\t" + getRootHive(s[2])); } else if (s[0].ToString().Contains("RDelete")) { Console.WriteLine(DateTime.Now.Hour + ":" + DateTime.Now.Minute + ":" + DateTime.Now.Second + "." + DateTime.Now.Millisecond + "\t" + s[0] + "\t" + getProcessName(int.Parse(s[0])) + "\t" + getRootHive(s[1])); } else if (s[0].ToString().Contains("FCreate")) { //Console.WriteLine(DateTime.Now.Hour+":"+DateTime.Now.Minute+":"+DateTime.Now.Second+"."+DateTime.Now.Millisecond + "\t" + s[0] + "\t" + getProcessName(int.Parse(s[1])) + "\t" + s[2]); } } } public void ReportException(Exception InInfo) { Console.WriteLine("The target process has reported an error:\r\n" + InInfo.ToString()); } public void Ping() { } public String getProcessName(int ID) { String name = ""; Process[] process = Process.GetProcesses(); for (int i = 0; i < process.Length; i++) { if (process[i].Id == ID) { name = process[i].ProcessName; } } return name; } public String getRootHive(String hKey) { int r = hKey.CompareTo("2147483648"); int r1 = hKey.CompareTo("2147483649"); int r2 = hKey.CompareTo("2147483650"); int r3 = hKey.CompareTo("2147483651"); int r4 = hKey.CompareTo("2147483653"); if (r == 0) { return "HKEY_CLASSES_ROOT"; } else if (r1 == 0) { return "HKEY_CURRENT_USER"; } else if (r2 == 0) { return "HKEY_LOCAL_MACHINE"; } else if (r3 == 0) { return "HKEY_USERS"; } else if (r4 == 0) { return "HKEY_CURRENT_CONFIG"; } else return hKey.ToString(); } } class Program : System.Windows.Forms.Form { static String ChannelName = null; public static Form1 ff; Program() // ADD THIS CONSTRUCTOR { InitializeComponent(); } static void Main() { try { Config.Register("A FileMon like demo application.", "FileMon.exe", "FileMonInject.dll"); RemoteHooking.IpcCreateServer<FileMonInterface>(ref ChannelName, WellKnownObjectMode.SingleCall); Process[] p = Process.GetProcesses(); for (int i = 0; i < p.Length; i++) { try { RemoteHooking.Inject(p[i].Id, "FileMonInject.dll", "FileMonInject.dll", ChannelName); } catch (Exception e) { } } } catch (Exception ExtInfo) { Console.WriteLine("There was an error while connecting to target:\r\n{0}", ExtInfo.ToString()); } } } }

Read the article

Doesn't get the output in Java Database Connectivity

- by Dooree

I'm working on Java Database Connectivity through Eclipse IDE. I built a database through Ubuntu Terminal, and I need to connect and work with it. However, when I tried to run the following code, I don't get any error, but the following output is showed, anybody knows why I don't get the output from the code ? //STEP 1. Import required packages import java.sql.*; public class FirstExample { // JDBC driver name and database URL static final String JDBC_DRIVER = "com.mysql.jdbc.Driver"; static final String DB_URL = "jdbc:mysql://localhost/EMP"; // Database credentials static final String USER = "username"; static final String PASS = "password"; public static void main(String[] args) { Connection conn = null; Statement stmt = null; try{ //STEP 2: Register JDBC driver Class.forName("com.mysql.jdbc.Driver"); //STEP 3: Open a connection System.out.println("Connecting to database..."); conn = DriverManager.getConnection(DB_URL,USER,PASS); //STEP 4: Execute a query System.out.println("Creating statement..."); stmt = conn.createStatement(); String sql; sql = "SELECT id, first, last, age FROM Employees"; ResultSet rs = stmt.executeQuery(sql); //STEP 5: Extract data from result set while(rs.next()){ //Retrieve by column name int id = rs.getInt("id"); int age = rs.getInt("age"); String first = rs.getString("first"); String last = rs.getString("last"); //Display values System.out.print("ID: " + id); System.out.print(", Age: " + age); System.out.print(", First: " + first); System.out.println(", Last: " + last); } //STEP 6: Clean-up environment rs.close(); stmt.close(); conn.close(); }catch(SQLException se){ //Handle errors for JDBC se.printStackTrace(); }catch(Exception e){ //Handle errors for Class.forName e.printStackTrace(); }finally{ //finally block used to close resources try{ if(stmt!=null) stmt.close(); }catch(SQLException se2){ }// nothing we can do try{ if(conn!=null) conn.close(); }catch(SQLException se){ se.printStackTrace(); }//end finally try }//end try System.out.println("Goodbye!"); }//end main }//end FirstExample <ConnectionProperties> <PropertyCategory name="Connection/Authentication"> <Property name="user" required="No" default="" sortOrder="-2147483647" since="all"> The user to connect as </Property> <Property name="password" required="No" default="" sortOrder="-2147483646" since="all"> The password to use when connecting </Property> <Property name="socketFactory" required="No" default="com.mysql.jdbc.StandardSocketFactory" sortOrder="4" since="3.0.3"> The name of the class that the driver should use for creating socket connections to the server. This class must implement the interface 'com.mysql.jdbc.SocketFactory' and have public no-args constructor. </Property> <Property name="connectTimeout" required="No" default="0" sortOrder="9" since="3.0.1"> Timeout for socket connect (in milliseconds), with 0 being no timeout. Only works on JDK-1.4 or newer. Defaults to '0'. </Property> ...

Read the article

R concentrating data frame

- by user1631503

I have a data frame like this >X_com Day_1 Day_2 Day_3 Day_4 Day_5 Day_6 Day_7 Day_8 Day_9 Day_10 1 0 0 0 0 0 0 0 0 0 1 2 0 0 0 0 0 0 0 0 0 0 3 0 0 0 0 0 0 0 0 0 0 4 0 0 0 0 0 0 0 0 0 0 5 0 0 0 0 0 0 0 0 0 0 6 0 0 0 0 0 0 0 0 0 0 7 0 0 0 0 0 0 0 0 0 0 8 0 0 0 0 0 0 0 0 0 0 I need to concentrate all the values into one column and add another column with "1;" So I did this > X_new=matrix(1,8,2) > X_new[1,]=paste(X_com[1,1], X_com[1,2],X_com[1,3],X_com [1,4],X_com[1,5],X_com[1,6],X_com[1,7],X_com[1,8],X_com [1,9],X_com[1,10], sep="") > X_new[2,]=paste(X_com[2,1], X_com[2,2],X_com[2,3],X_com [2,4],X_com[2,5],X_com[2,6],X_com[2,7],X_com[2,8],X_com [2,9],X_com[2,10], sep="") > X_new[3,]=paste(X_com[3,1], X_com[3,2],X_com[3,3],X_com [3,4],X_com[3,5],X_com[3,6],X_com[3,7],X_com[3,8],X_com [3,9],X_com[3,10], sep="") > X_new[4,]=paste(X_com[4,1], X_com[4,2],X_com[4,3],X_com [4,4],X_com[4,5],X_com[4,6],X_com[4,7],X_com[4,8],X_com [4,9],X_com[4,10], sep="") > X_new[5,]=paste(X_com[5,1], X_com[5,2],X_com[5,3],X_com [5,4],X_com[5,5],X_com[5,6],X_com[5,7],X_com[5,8],X_com [5,9],X_com[5,10], sep="") > X_new[6,]=paste(X_com[6,1], X_com[6,2],X_com[6,3],X_com [6,4],X_com[6,5],X_com[6,6],X_com[6,7],X_com[6,8],X_com [6,9],X_com[6,10], sep="") > X_new[7,]=paste(X_com[7,1], X_com[7,2],X_com[7,3],X_com [7,4],X_com[7,5],X_com[7,6],X_com[7,7],X_com[7,8],X_com [7,9],X_com[7,10], sep="") > X_new[8,]=paste(X_com[8,1], X_com[8,2],X_com[8,3],X_com [8,4],X_com[8,5],X_com[8,6],X_com[8,7],X_com[8,8],X_com [8,9],X_com[8,10], sep="") > X_new[1:8,2]="1;" > as.data.frame(X_new) V1 V2 1 0000000001 1; 2 0000000000 1; 3 0000000000 1; 4 0000000000 1; 5 0000000000 1; 6 0000000000 1; 7 0000000000 1; 8 0000000000 1; I believe there's definitely a faster way of achieving this but have no clue. The other problem is, I have over a thousand of data frame like this needs to be concentrated. I'm still learning how to loop these repetitive steps but is progressing quite slowly. If the original data frames were named uniquely, does that mean I have no choice but to work on each of them individually? Thank you in advance.

Read the article

map with string is broken?[solved]

- by teritriano

Yes. I can't see what im doing wrong the map is string, int Here the method bange::function::Add(lua_State *vm){ //userdata, function if (!lua_isfunction(vm, 2)){ cout << "bange: AddFunction: First argument isn't a function." << endl; return false;} void *pfunction = const_cast<void *>(lua_topointer(vm, 2)); char key[32] = {0}; snprintf(key, 32, "%p", pfunction); cout << "Key: " << key << endl; string strkey = key; if (this->functions.find(strkey) != this->functions.end()){ luaL_unref(vm, LUA_REGISTRYINDEX, this->functions[strkey]);} this->functions[strkey] = luaL_ref(vm, LUA_REGISTRYINDEX); return true; Ok, when the code is executed... Program received signal SIGSEGV, Segmentation fault. 0x00007ffff6e6caa9 in std::basic_string<char, std::char_traits<char>, std::allocator<char> > ::compare(std::basic_string<char, std::char_traits<char>, std::allocator<char> > const&) const () from /usr/lib/libstdc++.so.6 Seriously, what's wrong with my code. Thanks for help. Edit 1: Ok, I've done the solution and still fails. I've tried directly insert a string but gives the same error. Let's see, the object is a bange::scene inherited from bange::function. I create the object with lua_newuserdata: bange::scene *scene = static_cast<bange::scene *>(lua_newuserdata(vm, sizeof(bange::scene))); (...) scene = new (scene) bange::scene(width, height, nlayers, vm); I need this for LUA garbage collection. Now the access to bange::function::Add from Lua: static int bangefunction_Add(lua_State *vm){ //userdata, function bange::function *function = reinterpret_cast<bange::function *>(lua_touserdata(vm, 1)); cout &lt&lt "object with bange::function: " &lt&lt function << endl; bool added = function->bange::function::Add(vm); lua_pushboolean(vm, static_cast<int>(added)); return 1; } Userdata is bange::scene stored in Lua. Knowing that userdata is scene, in fact, the object's direction is the same when I've created the scene before. I need the reinterpret_cast, and then call the method. The pointer "this" is still the same direction inside the method. solved I did a small test in the bange::function constructor which works without problems. bange::function::function(){ string test("test"); this->functions["test"] = 2; } I finally noticed that the problem is bange::function *function = reinterpret_cast<bange::function *>(lua_touserdata(vm, 1)); because the object is bange::scene and no bange::function (i admit it, a pointer corruption) and this seems more a code design issue. So this, in a way, is solved. Thanks everybody.

Read the article

ASP.NET MVC 3 - New Features

- by imran_ku07

Introduction: ASP.NET MVC 3 just released by ASP.NET MVC team which includes some new features, some changes, some improvements and bug fixes. In this article, I will show you the new features of ASP.NET MVC 3. This will help you to get started using the new features of ASP.NET MVC 3. Full details of this announcement is available at Announcing release of ASP.NET MVC 3, IIS Express, SQL CE 4, Web Farm Framework, Orchard, WebMatrix. Description: New Razor View Engine: Razor view engine is one of the most coolest new feature in ASP.NET MVC 3. Razor is speeding things up just a little bit more. It is much smaller and lighter in size. Also it is very easy to learn. You can say ' write less, do more '. You can get start and learn more about Razor at Introducing “Razor” – a new view engine for ASP.NET. Granular Request Validation: Another biggest new feature in ASP.NET MVC 3 is Granular Request Validation. Default request validator will throw an exception when he see < followed by an exclamation(like <!) or < followed by the letters a through z(like <s) or & followed by a pound sign(like &#123) as a part of querystring, posted form, headers and cookie collection. In previous versions of ASP.NET MVC, you can control request validation using ValidateInputAttriubte. In ASP.NET MVC 3 you can control request validation at Model level by annotating your model properties with a new attribute called AllowHtmlAttribute. For details see Granular Request Validation in ASP.NET MVC 3. Sessionless Controller Support: Sessionless Controller is another great new feature in ASP.NET MVC 3. With Sessionless Controller you can easily control your session behavior for controllers. For example, you can make your HomeController's Session as Disabled or ReadOnly, allowing concurrent request execution for single user. For details see Concurrent Requests In ASP.NET MVC and HowTo: Sessionless Controller in MVC3 – what & and why?. Unobtrusive Ajax and Unobtrusive Client Side Validation is Supported: Another cool new feature in ASP.NET MVC 3 is support for Unobtrusive Ajax and Unobtrusive Client Side Validation. This feature allows separation of responsibilities within your web application by separating your html with your script. For details see Unobtrusive Ajax in ASP.NET MVC 3 and Unobtrusive Client Validation in ASP.NET MVC 3. Dependency Resolver: Dependency Resolver is another great feature of ASP.NET MVC 3. It allows you to register a dependency resolver that will be used by the framework. With this approach your application will not become tightly coupled and the dependency will be injected at run time. For details see ASP.NET MVC 3 Service Location. New Helper Methods: ASP.NET MVC 3 includes some helper methods of ASP.NET Web Pages technology that are used for common functionality. These helper methods includes: Chart, Crypto, WebGrid, WebImage and WebMail. For details of these helper methods, please see ASP.NET MVC 3 Release Notes. For using other helper methods of ASP.NET Web Pages see Using ASP.NET Web Pages Helpers in ASP.NET MVC. Child Action Output Caching: ASP.NET MVC 3 also includes another feature called Child Action Output Caching. This allows you to cache only a portion of the response when you are using Html.RenderAction or Html.Action. This cache can be varied by action name, action method signature and action method parameter values. For details see this. RemoteAttribute: ASP.NET MVC 3 allows you to validate a form field by making a remote server call through Ajax. This makes it very easy to perform remote validation at client side and quickly give the feedback to the user. For details see How to: Implement Remote Validation in ASP.NET MVC. CompareAttribute: ASP.NET MVC 3 includes a new validation attribute called CompareAttribute. CompareAttribute allows you to compare the values of two different properties of a model. For details see CompareAttribute in ASP.NET MVC 3. Miscellaneous New Features: ASP.NET MVC 2 includes FormValueProvider, QueryStringValueProvider, RouteDataValueProvider and HttpFileCollectionValueProvider. ASP.NET MVC 3 adds two additional value providers, ChildActionValueProvider and JsonValueProvider(JsonValueProvider is not physically exist). ChildActionValueProvider is used when you issue a child request using Html.Action and/or Html.RenderAction methods, so that your explicit parameter values in Html.Action and/or Html.RenderAction will always take precedence over other value providers. JsonValueProvider is used to model bind JSON data. For details see Sending JSON to an ASP.NET MVC Action Method Argument. In ASP.NET MVC 3, a new property named FileExtensions added to the VirtualPathProviderViewEngine class. This property is used when looking up a view by path (and not by name), so that only views with a file extension contained in the list specified by this new property is considered. For details see VirtualPathProviderViewEngine.FileExtensions Property . ASP.NET MVC 3 installation package also includes the NuGet Package Manager which will be automatically installed when you install ASP.NET MVC 3. NuGet makes it easy to install and update open source libraries and tools in Visual Studio. See this for details. In ASP.NET MVC 2, client side validation will not trigger for overridden model properties. For example, if have you a Model that contains some overridden properties then client side validation will not trigger for overridden properties in ASP.NET MVC 2 but client side validation will work for overridden properties in ASP.NET MVC 3. Client side validation is not supported for StringLengthAttribute.MinimumLength property in ASP.NET MVC 2. In ASP.NET MVC 3 client side validation will work for StringLengthAttribute.MinimumLength property. ASP.NET MVC 3 includes new action results like HttpUnauthorizedResult, HttpNotFoundResult and HttpStatusCodeResult. ASP.NET MVC 3 includes some new overloads of LabelFor and LabelForModel methods. For details see LabelExtensions.LabelForModel and LabelExtensions.LabelFor. In ASP.NET MVC 3, IControllerFactory includes a new method GetControllerSessionBehavior. This method is used to get controller's session behavior. For details see IControllerFactory.GetControllerSessionBehavior Method. In ASP.NET MVC 3, Controller class includes a new property ViewBag which is of type dynamic. This property allows you to access ViewData Dictionary using C # 4.0 dynamic features. For details see ControllerBase.ViewBag Property. ModelMetadata includes a property AdditionalValues which is of type Dictionary. In ASP.NET MVC 3 you can populate this property using AdditionalMetadataAttribute. For details see AdditionalMetadataAttribute Class. In ASP.NET MVC 3 you can also use MvcScaffolding to scaffold your Views and Controller. For details see Scaffold your ASP.NET MVC 3 project with the MvcScaffolding package. If you want to convert your application from ASP.NET MVC 2 to ASP.NET MVC 3 then there is an excellent tool that automatically converts ASP.NET MVC 2 application to ASP.NET MVC 3 application. For details see MVC 3 Project Upgrade Tool. In ASP.NET MVC 2 DisplayAttribute is not supported but in ASP.NET MVC 3 DisplayAttribute will work properly. ASP.NET MVC 3 also support model level validation via the new IValidatableObject interface. ASP.NET MVC 3 includes a new helper method Html.Raw. This helper method allows you to display unencoded HTML. Summary: In this article I showed you the new features of ASP.NET MVC 3. This will help you a lot when you start using ASP MVC 3. I also provide you the links where you can find further details. Hopefully you will enjoy this article too.

Read the article

WiX 3 Tutorial: Understanding main WXS and WXI file

- by Mladen Prajdic

In the previous post we’ve taken a look at the WiX solution/project structure and project properties. We’re still playing with our super SuperForm application and today we’ll take a look at the general parts of the main wxs file, SuperForm.wxs, and the wxi include file. For wxs file we’ll just go over the general description of what each part does in the code comments. The more detailed descriptions will be in future posts about features themselves. WXI include file Include files are exactly what their name implies. To include a wxi file into the wxs file you have to put the wxi at the beginning of each .wxs file you wish to include it in. If you’ve ever worked with C++ you can think of the include files as .h files. For example if you include SuperFormVariables.wxi into the SuperForm.wxs, the variables in the wxi won’t be seen in FilesFragment.wxs or RegistryFragment.wxs. You’d have to include it manually into those two wxs files too. For preprocessor variable $(var.VariableName) to be seen by every file in the project you have to include them in the WiX project properties->Build->“Define preprocessor variables” textbox. This is why I’ve chosen not to go this route because in multi developer teams not everyone has the same directory structure and having a single variable would mean each developer would have to checkout the wixproj file to edit the variable. This is pretty much unacceptable by my standards. This is why we’ve added a System Environment variable named SuperFormFilesDir as is shown in the previous Wix Tutorial post. Because the FilesFragment.wxs is autogenerated on every project build we don’t want to change it manually each time by adding the include wxi at the beginning of the file. This way we couldn’t recreate it in each pre-build event. <?xml version="1.0" encoding="utf-8"?><Include>  <?define MajorVersion="1" ?> <?define MinorVersion="0" ?> <?define BuildVersion="0" ?>  <?define Revision="0" ?>  <?define VersionNumber="$(var.MajorVersion).$(var.MinorVersion).$(var.BuildVersion).$(var.Revision)" ?>  <?define UpgradeCode="YOUR-GUID-HERE" ?>  <?define ResourcesDir="$(var.ProjectDir)\Resources" ?>  <?define ExeProcessName="SuperForm.MainApp.exe" ?></Include> For now there’s no way to tell WiX in Visual Studio to have a wxi include file available to the whole project, so you have to include it in each file separately. Only variables set in “Define preprocessor variables” or System Environment variables are accessible to the whole project for now. The main WXS file: SuperForm.wxs We’ll only take a look at the general structure of the main SuperForm.wxs and not its the details. We’ll cover the details in future posts. The code comments should provide plenty info about what each part does in general. Basically there are 5 major parts. The update part, the conditions and actions part, the UI install sequence, the directory structure and the features we want to include. <?xml version="1.0" encoding="UTF-8"?><Wix xmlns="http://schemas.microsoft.com/wix/2006/wi" xmlns:util="http://schemas.microsoft.com/wix/UtilExtension">  <?include $(sys.CURRENTDIR)Includes\SuperFormVariables.wxi ?>  <Product Id="*" Name="!(loc.ProductName) $(var.VersionNumber)" Language="!(loc.LANG)" Version="$(var.VersionNumber)" Manufacturer="!(loc.ManufacturerName)" UpgradeCode="$(var.UpgradeCode)">  <Package InstallerVersion="300" Compressed="yes" InstallScope="perMachine"/> <Media Id="1" Cabinet="media1.cab" EmbedCab="yes" />  <Upgrade Id="$(var.UpgradeCode)"> <UpgradeVersion OnlyDetect="yes" Minimum="$(var.VersionNumber)" IncludeMinimum="no" Property="NEWER_VERSION_FOUND" /> <UpgradeVersion Minimum="0.0.0.0" IncludeMinimum="yes" Maximum="$(var.VersionNumber)" IncludeMaximum="no" Property="OLDER_VERSION_FOUND" /> </Upgrade>  <PropertyRef Id="NETFRAMEWORK35"/>  <Condition Message="!(loc.DotNetFrameworkNeeded)"> <![CDATA[Installed OR NETFRAMEWORK35]]> </Condition> <Condition Message="!(loc.AppNotSupported)"> <![CDATA[Installed OR ((VersionNT >= 501 AND ServicePackLevel >= 2) OR (VersionNT >= 502))]]> </Condition>  <CustomAction Id="NewerVersionFound" Error="!(loc.SuperFormNewerVersionInstalled)" /> <InstallExecuteSequence>  <Custom Action="NewerVersionFound" After="FindRelatedProducts"> <![CDATA[NEWER_VERSION_FOUND]]> </Custom>  <RemoveExistingProducts After="InstallInitialize"/>  <Custom Action="WixCloseApplications" Before="InstallInitialize" /> </InstallExecuteSequence>  <util:CloseApplication Id="CloseSuperForm" CloseMessage="no" Description="!(loc.MustCloseSuperForm)" ElevatedCloseMessage="no" RebootPrompt="no" Target="$(var.ExeProcessName)" />  <UIRef Id="WixUI_InstallDir" /> <UI>  <DialogRef Id="FilesInUse" /> <DialogRef Id="MsiRMFilesInUse" />  </UI>  <Icon Id="SuperFormIcon.ico" SourceFile="$(var.ResourcesDir)\Exclam.ico" /> <Property Id="ARPPRODUCTICON" Value="SuperFormIcon.ico" />   <Directory Id="TARGETDIR" Name="SourceDir"> <Directory Id="ProgramFilesFolder"> <Directory Id="INSTALLLOCATION" Name="!(loc.ProductName)" /> </Directory> </Directory>  <Property Id="WIXUI_INSTALLDIR" Value="INSTALLLOCATION" />  <Feature Id="SuperFormFeature" Title="!(loc.ProductName)" Level="1"> <ComponentGroupRef Id="SuperFormFiles" /> <ComponentRef Id="cmpVersionInRegistry" /> <ComponentRef Id="cmpIsThisUpdateInRegistry" /> </Feature> </Product></Wix> For more info on what certain attributes mean you should look into the WiX Documentation. WiX 3 tutorial by Mladen Prajdic navigation WiX 3 Tutorial: Solution/Project structure and Dev resources WiX 3 Tutorial: Understanding main wxs and wxi file WiX 3 Tutorial: Generating file/directory fragments with Heat.exe

Read the article

SQL SERVER – Shrinking NDF and MDF Files – Readers’ Opinion

- by pinaldave

Previously, I had written a blog post about SQL SERVER – Shrinking NDF and MDF Files – A Safe Operation. After that, I have written the following blog post that talks about the advantage and disadvantage of Shrinking and why one should not be Shrinking a file SQL SERVER – SHRINKFILE and TRUNCATE Log File in SQL Server 2008. On this subject, SQL Server Expert Imran Mohammed left an excellent comment. I just feel that his comment is worth a big article itself. For everybody to read his wonderful explanation, I am posting this blog post here. Thanks Imran! Shrinking Database always creates performance degradation and increases fragmentation in the database. I suggest that you keep that in mind before you start reading the following comment. If you are going to say Shrinking Database is bad and evil, here I am saying it first and loud. Now, the comment of Imran is written while keeping in mind only the process showing how the Shrinking Database Operation works. Imran has already explained his understanding and requests further explanation. I have removed the Best Practices section from Imran’s comments, as there are a few corrections. Comments from Imran - Before I explain to you the concept of Shrink Database, let us understand the concept of Database Files. When we create a new database inside the SQL Server, it is typical that SQl Server creates two physical files in the Operating System: one with .MDF Extension, and another with .LDF Extension. .MDF is called as Primary Data File. .LDF is called as Transactional Log file. If you add one or more data files to a database, the physical file that will be created in the Operating System will have an extension of .NDF, which is called as Secondary Data File; whereas, when you add one or more log files to a database, the physical file that will be created in the Operating System will have the same extension as .LDF. The questions now are, “Why does a new data file have a different extension (.NDF)?”, “Why is it called as a secondary data file?” and, “Why is .MDF file called as a primary data file?” Answers: Note: The following explanation is based on my limited knowledge of SQL Server, so experts please do comment. A data file with a .MDF extension is called a Primary Data File, and the reason behind it is that it contains Database Catalogs. Catalogs mean Meta Data. Meta Data is “Data about Data”. An example for Meta Data includes system objects that store information about other objects, except the data stored by the users. sysobjects stores information about all objects in that database. sysindexes stores information about all indexes and rows of every table in that database. syscolumns stores information about all columns that each table has in that database. sysusers stores how many users that database has. Although Meta Data stores information about other objects, it is not the transactional data that a user enters; rather, it’s a system data about the data. Because Primary Data File (.MDF) contains important information about the database, it is treated as a special file. It is given the name Primary Data file because it contains the Database Catalogs. This file is present in the Primary File Group. You can always create additional objects (Tables, indexes etc.) in the Primary data file (This file is present in the Primary File group), by mentioning that you want to create this object under the Primary File Group. Any additional data file that you add to the database will have only transactional data but no Meta Data, so that’s why it is called as the Secondary Data File. It is given the extension name .NDF so that the user can easily identify whether a specific data file is a Primary Data File or a Secondary Data File(s). There are many advantages of storing data in different files that are under different file groups. You can put your read only in the tables in one file (file group) and read-write tables in another file (file group) and take a backup of only the file group that has read the write data, so that you can avoid taking the backup of a read-only data that cannot be altered. Creating additional files in different physical hard disks also improves I/O performance. A real-time scenario where we use Files could be this one: Let’s say you have created a database called MYDB in the D-Drive which has a 50 GB space. You also have 1 Database File (.MDF) and 1 Log File on D-Drive and suppose that all of that 50 GB space has been used up and you do not have any free space left but you still want to add an additional space to the database. One easy option would be to add one more physical hard disk to the server, add new data file to MYDB database and create this new data file in a new hard disk then move some of the objects from one file to another, and put the file group under which you added new file as default File group, so that any new object that is created gets into the new files, unless specified. Now that we got a basic idea of what data files are, what type of data they store and why they are named the way they are, let’s move on to the next topic, Shrinking. First of all, I disagree with the Microsoft terminology for naming this feature as “Shrinking”. Shrinking, in regular terms, means to reduce the size of a file by means of compressing it. BUT in SQL Server, Shrinking DOES NOT mean compressing. Shrinking in SQL Server means to remove an empty space from database files and release the empty space either to the Operating System or to SQL Server. Let’s examine this through an example. Let’s say you have a database “MYDB” with a size of 50 GB that has a free space of about 20 GB, which means 30GB in the database is filled with data and the 20 GB of space is free in the database because it is not currently utilized by the SQL Server (Database); it is reserved and not yet in use. If you choose to shrink the database and to release an empty space to Operating System, and MIND YOU, you can only shrink the database size to 30 GB (in our example). You cannot shrink the database to a size less than what is filled with data. So, if you have a database that is full and has no empty space in the data file and log file (you don’t have an extra disk space to set Auto growth option ON), YOU CANNOT issue the SHRINK Database/File command, because of two reasons: There is no empty space to be released because the Shrink command does not compress the database; it only removes the empty space from the database files and there is no empty space. Remember, the Shrink command is a logged operation. When we perform the Shrink operation, this information is logged in the log file. If there is no empty space in the log file, SQL Server cannot write to the log file and you cannot shrink a database. Now answering your questions: (1) Q: What are the USEDPAGES & ESTIMATEDPAGES that appear on the Results Pane after using the DBCC SHRINKDATABASE (NorthWind, 10) ? A: According to Books Online (For SQL Server 2000): UsedPages: the number of 8-KB pages currently used by the file. EstimatedPages: the number of 8-KB pages that SQL Server estimates the file could be shrunk down to. Important Note: Before asking any question, make sure you go through Books Online or search on the Google once. The reasons for doing so have many advantages: 1. If someone else already has had this question before, chances that it is already answered are more than 50 %. 2. This reduces your waiting time for the answer. (2) Q: What is the difference between Shrinking the Database using DBCC command like the one above & shrinking it from the Enterprise Manager Console by Right-Clicking the database, going to TASKS & then selecting SHRINK Option, on a SQL Server 2000 environment? A: As far as my knowledge goes, there is no difference, both will work the same way, one advantage of using this command from query analyzer is, your console won’t be freezed. You can do perform your regular activities using Enterprise Manager. (3) Q: What is this .NDF file that is discussed above? I have never heard of it. What is it used for? Is it used by end-users, DBAs or the SERVER/SYSTEM itself? A: .NDF File is a secondary data file. You never heard of it because when database is created, SQL Server creates database by default with only 1 data file (.MDF) and 1 log file (.LDF) or however your model database has been setup, because a model database is a template used every time you create a new database using the CREATE DATABASE Command. Unless you have added an extra data file, you will not see it. This file is used by the SQL Server to store data which are saved by the users. Hope this information helps. I would like to as the experts to please comment if what I understand is not what the Microsoft guys meant. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Readers Contribution, Readers Question, SQL, SQL Authority, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology

Read the article

Using LINQ Distinct: With an Example on ASP.NET MVC SelectListItem

- by Joe Mayo

One of the things that might be surprising in the LINQ Distinct standard query operator is that it doesn’t automatically work properly on custom classes. There are reasons for this, which I’ll explain shortly. The example I’ll use in this post focuses on pulling a unique list of names to load into a drop-down list. I’ll explain the sample application, show you typical first shot at Distinct, explain why it won’t work as you expect, and then demonstrate a solution to make Distinct work with any custom class. The technologies I’m using are LINQ to Twitter, LINQ to Objects, Telerik Extensions for ASP.NET MVC, ASP.NET MVC 2, and Visual Studio 2010. The function of the example program is to show a list of people that I follow. In Twitter API vernacular, these people are called “Friends”; though I’ve never met most of them in real life. This is part of the ubiquitous language of social networking, and Twitter in particular, so you’ll see my objects named accordingly. Where Distinct comes into play is because I want to have a drop-down list with the names of the friends appearing in the list. Some friends are quite verbose, which means I can’t just extract names from each tweet and populate the drop-down; otherwise, I would end up with many duplicate names. Therefore, Distinct is the appropriate operator to eliminate the extra entries from my friends who tend to be enthusiastic tweeters. The sample doesn’t do anything with the drop-down list and I leave that up to imagination for what it’s practical purpose could be; perhaps a filter for the list if I only want to see a certain person’s tweets or maybe a quick list that I plan to combine with a TextBox and Button to reply to a friend. When the program runs, you’ll need to authenticate with Twitter, because I’m using OAuth (DotNetOpenAuth), for authentication, and then you’ll see the drop-down list of names above the grid with the most recent tweets from friends. Here’s what the application looks like when it runs: As you can see, there is a drop-down list above the grid. The drop-down list is where most of the focus of this article will be. There is some description of the code before we talk about the Distinct operator, but we’ll get there soon. This is an ASP.NET MVC2 application, written with VS 2010. Here’s the View that produces this screen: <%@ Page Language="C#" MasterPageFile="~/Views/Shared/Site.Master" Inherits="System.Web.Mvc.ViewPage<TwitterFriendsViewModel>" %> <%@ Import Namespace="DistinctSelectList.Models" %> <asp:Content ID="Content1" ContentPlaceHolderID="TitleContent" runat="server"> Home Page </asp:Content><asp:Content ID="Content2" ContentPlaceHolderID="MainContent" runat="server"> <fieldset> <legend>Twitter Friends</legend> <div> <%= Html.DropDownListFor( twendVM => twendVM.FriendNames, Model.FriendNames, "<All Friends>") %> </div> <div> <% Html.Telerik().Grid<TweetViewModel>(Model.Tweets) .Name("TwitterFriendsGrid") .Columns(cols => { cols.Template(col => { %> <img src="<%= col.ImageUrl %>" alt="<%= col.ScreenName %>" /> <% }); cols.Bound(col => col.ScreenName); cols.Bound(col => col.Tweet); }) .Render(); %> </div> </fieldset> </asp:Content> As shown above, the Grid is from Telerik’s Extensions for ASP.NET MVC. The first column is a template that renders the user’s Avatar from a URL provided by the Twitter query. Both the Grid and DropDownListFor display properties that are collections from a TwitterFriendsViewModel class, shown below: using System.Collections.Generic; using System.Web.Mvc; namespace DistinctSelectList.Models { /// /// For finding friend info on screen /// public class TwitterFriendsViewModel { /// /// Display names of friends in drop-down list /// public List FriendNames { get; set; } /// /// Display tweets in grid /// public List Tweets { get; set; } } } I created the TwitterFreindsViewModel. The two Lists are what the View consumes to populate the DropDownListFor and Grid. Notice that FriendNames is a List of SelectListItem, which is an MVC class. Another custom class I created is the TweetViewModel (the type of the Tweets List), shown below: namespace DistinctSelectList.Models { /// /// Info on friend tweets /// public class TweetViewModel { /// /// User's avatar /// public string ImageUrl { get; set; } /// /// User's Twitter name /// public string ScreenName { get; set; } /// /// Text containing user's tweet /// public string Tweet { get; set; } } } The initial Twitter query returns much more information than we need for our purposes and this a special class for displaying info in the View. Now you know about the View and how it’s constructed. Let’s look at the controller next. The controller for this demo performs authentication, data retrieval, data manipulation, and view selection. I’ll skip the description of the authentication because it’s a normal part of using OAuth with LINQ to Twitter. Instead, we’ll drill down and focus on the Distinct operator. However, I’ll show you the entire controller, below, so that you can see how it all fits together: using System.Linq; using System.Web.Mvc; using DistinctSelectList.Models; using LinqToTwitter; namespace DistinctSelectList.Controllers { [HandleError] public class HomeController : Controller { private MvcOAuthAuthorization auth; private TwitterContext twitterCtx; /// /// Display a list of friends current tweets /// /// public ActionResult Index() { auth = new MvcOAuthAuthorization(InMemoryTokenManager.Instance, InMemoryTokenManager.AccessToken); string accessToken = auth.CompleteAuthorize(); if (accessToken != null) { InMemoryTokenManager.AccessToken = accessToken; } if (auth.CachedCredentialsAvailable) { auth.SignOn(); } else { return auth.BeginAuthorize(); } twitterCtx = new TwitterContext(auth); var friendTweets = (from tweet in twitterCtx.Status where tweet.Type == StatusType.Friends select new TweetViewModel { ImageUrl = tweet.User.ProfileImageUrl, ScreenName = tweet.User.Identifier.ScreenName, Tweet = tweet.Text }) .ToList(); var friendNames = (from tweet in friendTweets select new SelectListItem { Text = tweet.ScreenName, Value = tweet.ScreenName }) .Distinct() .ToList(); var twendsVM = new TwitterFriendsViewModel { Tweets = friendTweets, FriendNames = friendNames }; return View(twendsVM); } public ActionResult About() { return View(); } } } The important part of the listing above are the LINQ to Twitter queries for friendTweets and friendNames. Both of these results are used in the subsequent population of the twendsVM instance that is passed to the view. Let’s dissect these two statements for clarification and focus on what is happening with Distinct. The query for friendTweets gets a list of the 20 most recent tweets (as specified by the Twitter API for friend queries) and performs a projection into the custom TweetViewModel class, repeated below for your convenience: var friendTweets = (from tweet in twitterCtx.Status where tweet.Type == StatusType.Friends select new TweetViewModel { ImageUrl = tweet.User.ProfileImageUrl, ScreenName = tweet.User.Identifier.ScreenName, Tweet = tweet.Text }) .ToList(); The LINQ to Twitter query above simplifies what we need to work with in the View and the reduces the amount of information we have to look at in subsequent queries. Given the friendTweets above, the next query performs another projection into an MVC SelectListItem, which is required for binding to the DropDownList. This brings us to the focus of this blog post, writing a correct query that uses the Distinct operator. The query below uses LINQ to Objects, querying the friendTweets collection to get friendNames: var friendNames = (from tweet in friendTweets select new SelectListItem { Text = tweet.ScreenName, Value = tweet.ScreenName }) .Distinct() .ToList(); The above implementation of Distinct seems normal, but it is deceptively incorrect. After running the query above, by executing the application, you’ll notice that the drop-down list contains many duplicates. This will send you back to the code scratching your head, but there’s a reason why this happens. To understand the problem, we must examine how Distinct works in LINQ to Objects. Distinct has two overloads: one without parameters, as shown above, and another that takes a parameter of type IEqualityComparer<T>. In the case above, no parameters, Distinct will call EqualityComparer<T>.Default behind the scenes to make comparisons as it iterates through the list. You don’t have problems with the built-in types, such as string, int, DateTime, etc, because they all implement IEquatable<T>. However, many .NET Framework classes, such as SelectListItem, don’t implement IEquatable<T>. So, what happens is that EqualityComparer<T>.Default results in a call to Object.Equals, which performs reference equality on reference type objects. You don’t have this problem with value types because the default implementation of Object.Equals is bitwise equality. However, most of your projections that use Distinct are on classes, just like the SelectListItem used in this demo application. So, the reason why Distinct didn’t produce the results we wanted was because we used a type that doesn’t define its own equality and Distinct used the default reference equality. This resulted in all objects being included in the results because they are all separate instances in memory with unique references. As you might have guessed, the solution to the problem is to use the second overload of Distinct that accepts an IEqualityComparer<T> instance. If you were projecting into your own custom type, you could make that type implement IEqualityComparer<T>, but SelectListItem belongs to the .NET Framework Class Library. Therefore, the solution is to create a custom type to implement IEqualityComparer<T>, as in the SelectListItemComparer class, shown below: using System.Collections.Generic; using System.Web.Mvc; namespace DistinctSelectList.Models { public class SelectListItemComparer : EqualityComparer { public override bool Equals(SelectListItem x, SelectListItem y) { return x.Value.Equals(y.Value); } public override int GetHashCode(SelectListItem obj) { return obj.Value.GetHashCode(); } } } The SelectListItemComparer class above doesn’t implement IEqualityComparer<SelectListItem>, but rather derives from EqualityComparer<SelectListItem>. Microsoft recommends this approach for consistency with the behavior of generic collection classes. However, if your custom type already derives from a base class, go ahead and implement IEqualityComparer<T>, which will still work. EqualityComparer is an abstract class, that implements IEqualityComparer<T> with Equals and GetHashCode abstract methods. For the purposes of this application, the SelectListItem.Value property is sufficient to determine if two items are equal. Since SelectListItem.Value is type string, the code delegates equality to the string class. The code also delegates the GetHashCode operation to the string class.You might have other criteria in your own object and would need to define what it means for your object to be equal. Now that we have an IEqualityComparer<SelectListItem>, let’s fix the problem. The code below modifies the query where we want distinct values: var friendNames = (from tweet in friendTweets select new SelectListItem { Text = tweet.ScreenName, Value = tweet.ScreenName }) .Distinct(new SelectListItemComparer()) .ToList(); Notice how the code above passes a new instance of SelectListItemComparer as the parameter to the Distinct operator. Now, when you run the application, the drop-down list will behave as you expect, showing only a unique set of names. In addition to Distinct, other LINQ Standard Query Operators have overloads that accept IEqualityComparer<T>’s, You can use the same techniques as shown here, with SelectListItemComparer, with those other operators as well. Now you know how to resolve problems with getting Distinct to work properly and also have a way to fix problems with other operators that require equality comparisons. @JoeMayo

Read the article

500 Metro Style WP7 Icons

- by Bil Simser

I was inspired by The Noun Project, a project that offers up “Metro-style” icons in SVG format. The project is licensed under a public domain license and while it’s a great project, all of the content is in SVG format. Jon Galloway has a great post (from 2007) talking about the differences between SVG and XAML so I highly recommend that for some background. I thought it would be helpful to the WPF/Windows Phone 7/Silverlight community to provide the content in alternative formats for use in your applications. The Goods I’ve put together a package of the 500 icons (502 actually) in PNG, XAML and the original SVG format along with a couple of sample projects so you can see them in action. There’s a WPF desktop app: And a Windows Phone 7 app: Building It To get all the content first I wrote up a quick program to suck the original SVG files. Luckily they’re all in a common path just named 1.SVG, 2.SVG, and so on. Easy sleazy to grab the contents. Once I had 500 SVG files I used the latest copy of XamlTune, an open source CodePlex project that has a command line conversion tool to convert the directory of SVG files into XAML (the tool also created a PNG file of each SVG so that’s just icing on the cake). Conversions The conversion from SVG to XAML isn’t 100%. While you can just drop the content into a WPF app, it doesn’t work that way for WP7. There are just some small adjustments I made to each format so you’ll have to do the same. Follow the information below or refer to the sample applications. As a sample, here’s an icon we want to use: Here’s the original SVG file: <svg version="1.0" id="Layer_1" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" x="0px" y="0px" width="100px" height="94.616px" viewBox="0 0 100 94.616" enable-background="new 0 0 100 94.616" xml:space="preserve"> <path d="M25.076,15.639c4.324,0.009,7.824-3.488,7.82-7.82C32.9,3.512,29.4,0.012,25.076,0c-4.313,0.012-7.814,3.512-7.821,7.819 C17.262,12.15,20.763,15.648,25.076,15.639L25.076,15.639z"/> <path d="M4.593,43.388h6.861l4.137-15.135h1.716L13.22,43.388h24.318l-4.389-15.135h1.817l2.32,7.415 c1.08,3.131,3.852,3.851,6.003,1.162l8.375-10.142c2.651-3.42-2.104-7.021-4.844-4.035l-4.993,5.952 c0.007,0.095-0.96-3.278-0.96-3.278c-1.135-3.978-4.918-7.903-10.595-7.922H19.576c-5.071,0.019-9.043,4.434-9.888,7.214 L4.593,43.388L4.593,43.388z"/> <polygon points="56.206,22.753 56.206,7.163 49.192,7.163 49.192,22.753 56.206,22.753 "/> <path d="M79.87,15.738c4.332-0.014,7.831-3.516,7.82-7.82c0.011-4.332-3.488-7.833-7.82-7.82c-4.306-0.013-7.806,3.488-7.821,7.82 C72.064,12.222,75.564,15.725,79.87,15.738L79.87,15.738z"/> <path d="M89.759,89.556v-43.19h5.751V22.804c0.007-3.079-2.757-5.448-6.71-5.449H70.436c-3.65,0.001-4.539,1.186-5.551,2.168 L49.597,37.889c-3.098,3.848,2.428,8.333,5.55,4.743L69.88,25.226v64.43c-0.019,6.475,9.06,6.686,9.081,0.201v-36.58h1.765v36.379 C80.748,96.109,89.772,96.13,89.759,89.556L89.759,89.556z"/> <polygon points="100,54.035 100,45.155 0,45.155 0,54.035 100,54.035 "/> </svg> Here’s the XAML that XamlTune created. It can be used in any WPF app without any changes: <Canvas Name="Layer_1" Width="100" Height="94.616" ClipToBounds="True" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"> <Path Fill="#FF000000"> <Path.Data> <PathGeometry FillRule="Nonzero" Figures="M25.076,15.639C29.4,15.648 32.9,12.151 32.896,7.819 32.9,3.512 29.4,0.012 25.076,0 20.763,0.012 17.262,3.512 17.255,7.819 17.262,12.15 20.763,15.648 25.076,15.639L25.076,15.639z" /> </Path.Data> </Path> <Path Fill="#FF000000"> <Path.Data> <PathGeometry FillRule="Nonzero" Figures="M4.593,43.388L11.454,43.388 15.591,28.253 17.307,28.253 13.22,43.388 37.538,43.388 33.149,28.253 34.966,28.253 37.286,35.668C38.366,38.799,41.138,39.519,43.289,36.83L51.664,26.688C54.315,23.268,49.56,19.667,46.82,22.653L41.827,28.605C41.834,28.7 40.867,25.327 40.867,25.327 39.732,21.349 35.949,17.424 30.272,17.405L19.576,17.405C14.505,17.424,10.533,21.839,9.688,24.619L4.593,43.388 4.593,43.388z" /> </Path.Data> </Path> <Path Fill="#FF000000"> <Path.Data> <PathGeometry FillRule="Nonzero" Figures="M56.206,22.753L56.206,7.163 49.192,7.163 49.192,22.753 56.206,22.753z" /> </Path.Data> </Path> <Path Fill="#FF000000"> <Path.Data> <PathGeometry FillRule="Nonzero" Figures="M79.87,15.738C84.202,15.724 87.701,12.222 87.69,7.918 87.701,3.586 84.202,0.0849999999999991 79.87,0.097999999999999 75.564,0.084999999999999 72.064,3.586 72.049,7.918 72.064,12.222 75.564,15.725 79.87,15.738L79.87,15.738z" /> </Path.Data> </Path> <Path Fill="#FF000000"> <Path.Data> <PathGeometry FillRule="Nonzero" Figures="M89.759,89.556L89.759,46.366 95.51,46.366 95.51,22.804C95.517,19.725,92.753,17.356,88.8,17.355L70.436,17.355C66.786,17.356,65.897,18.541,64.885,19.523L49.597,37.889C46.499,41.737,52.025,46.222,55.147,42.632L69.88,25.226 69.88,89.656C69.861,96.131,78.94,96.342,78.961,89.857L78.961,53.277 80.726,53.277 80.726,89.656C80.748,96.109,89.772,96.13,89.759,89.556L89.759,89.556z" /> </Path.Data> </Path> <Path Fill="#FF000000"> <Path.Data> <PathGeometry FillRule="Nonzero" Figures="M100,54.035L100,45.155 0,45.155 0,54.035 100,54.035z" /> </Path.Data> </Path> </Canvas> The XAML works AS-IS in a WPF application but there are some changes I did to get it to work in a WP7 app. Here’s the modified XAML in a WP7 application: <Canvas Grid.Row="0" Grid.Column="0" Name="Icon_1" Width="100" Height="94.616"> <Path Fill="#FF000000" Data="M25.076,15.639C29.4,15.648 32.9,12.151 32.896,7.819 32.9,3.512 29.4,0.012 25.076,0 20.763,0.012 17.262,3.512 17.255,7.819 17.262,12.15 20.763,15.648 25.076,15.639L25.076,15.639z"> </Path> <Path Fill="#FF000000" Data="M4.593,43.388L11.454,43.388 15.591,28.253 17.307,28.253 13.22,43.388 37.538,43.388 33.149,28.253 34.966,28.253 37.286,35.668C38.366,38.799,41.138,39.519,43.289,36.83L51.664,26.688C54.315,23.268,49.56,19.667,46.82,22.653L41.827,28.605C41.834,28.7 40.867,25.327 40.867,25.327 39.732,21.349 35.949,17.424 30.272,17.405L19.576,17.405C14.505,17.424,10.533,21.839,9.688,24.619L4.593,43.388 4.593,43.388z"> </Path> <Path Fill="#FF000000" Data="M56.206,22.753L56.206,7.163 49.192,7.163 49.192,22.753 56.206,22.753z"> </Path> <Path Fill="#FF000000" Data="M79.87,15.738C84.202,15.724 87.701,12.222 87.69,7.918 87.701,3.586 84.202,0.0849999999999991 79.87,0.097999999999999 75.564,0.084999999999999 72.064,3.586 72.049,7.918 72.064,12.222 75.564,15.725 79.87,15.738L79.87,15.738z"> </Path> <Path Fill="#FF000000" Data="M89.759,89.556L89.759,46.366 95.51,46.366 95.51,22.804C95.517,19.725,92.753,17.356,88.8,17.355L70.436,17.355C66.786,17.356,65.897,18.541,64.885,19.523L49.597,37.889C46.499,41.737,52.025,46.222,55.147,42.632L69.88,25.226 69.88,89.656C69.861,96.131,78.94,96.342,78.961,89.857L78.961,53.277 80.726,53.277 80.726,89.656C80.748,96.109,89.772,96.13,89.759,89.556L89.759,89.556z"> </Path> <Path Fill="#FF000000" Data="M100,54.035L100,45.155 0,45.155 0,54.035 100,54.035z"> </Path> </Canvas> All I did was take the data portion and put it directly into a Data attribute on the Path. Note that while it does show up in the app (on the emulator or device) it wouldn’t show up in Visual Studio for me. Maybe some XAML guru out there can tell me why. You can just as easily use the PNG files in WP7 but if you want the crispness of vector graphics, go for the XAML version. Of course with XamlTune being open source you could always modify the output of that program to cater it to your app. If you do make a change that’s worthy please consider submitting a patch to the project so everyone can benefit. Hope this helps and happy programming! Resources and Links Sample Project and Icons XamlTune an open source project to convert SVG to XAML The Noun Project source of the original files Jon Galloways post on SVG and XAML StackOverflow question on converting SVG to XAML

Read the article

Host AngularJS (Html5Mode) in ASP.NET vNext

- by Shaun

Originally posted on: http://geekswithblogs.net/shaunxu/archive/2014/06/10/host-angularjs-html5mode-in-asp.net-vnext.aspxMicrosoft had announced ASP.NET vNext in BUILD and TechED recently and as a developer, I found that we can add features into one ASP.NET vNext application such as MVC, WebAPI, SignalR, etc.. Also it's cross platform which means I can host ASP.NET on Windows, Linux and OS X. If you are following my blog you should knew that I'm currently working on a project which uses ASP.NET WebAPI, SignalR and AngularJS. Currently the AngularJS part is hosted by Express in Node.js while WebAPI and SignalR are hosted in ASP.NET. I was looking for a solution to host all of them in one platform so that my SignalR can utilize WebSocket. Currently AngularJS and SignalR are hosted in the same domain but different port so it has to use ServerSendEvent. It can be upgraded to WebSocket if I host both of them in the same port. Host AngularJS in ASP.NET vNext Static File Middleware ASP.NET vNext utilizes middleware pattern to register feature it uses, which is very similar as Express in Node.js. Since AngularJS is a pure client side framework in theory what I need to do is to use ASP.NET vNext as a static file server. This is very easy as there's a build-in middleware shipped alone with ASP.NET vNext. Assuming I have "index.html" as below. 1: <html data-ng-app="demo"> 2: <head> 3: <script type="text/javascript" src="angular.js" /> 4: <script type="text/javascript" src="angular-ui-router.js" /> 5: <script type="text/javascript" src="app.js" /> 6: </head> 7: <body> 8: <h1>ASP.NET vNext with AngularJS</h1> 9: <div> 10: <a href="javascript:void(0)" data-ui-sref="view1">View 1</a> | 11: <a href="javascript:void(0)" data-ui-sref="view2">View 2</a> 12: </div> 13: <div data-ui-view></div> 14: </body> 15: </html> And the AngularJS JavaScript file as below. Notices that I have two views which only contains one line literal indicates the view name. 1: 'use strict'; 2: 3: var app = angular.module('demo', ['ui.router']); 4: 5: app.config(['$stateProvider', '$locationProvider', function ($stateProvider, $locationProvider) { 6: $stateProvider.state('view1', { 7: url: '/view1', 8: templateUrl: 'view1.html', 9: controller: 'View1Ctrl' }); 10: 11: $stateProvider.state('view2', { 12: url: '/view2', 13: templateUrl: 'view2.html', 14: controller: 'View2Ctrl' }); 15: }]); 16: 17: app.controller('View1Ctrl', function ($scope) { 18: }); 19: 20: app.controller('View2Ctrl', function ($scope) { 21: }); All AngularJS files are located in "app" folder and my ASP.NET vNext files are besides it. The "project.json" contains all dependencies I need to host static file server. 1: { 2: "dependencies": { 3: "Helios" : "0.1-alpha-*", 4: "Microsoft.AspNet.FileSystems": "0.1-alpha-*", 5: "Microsoft.AspNet.Http": "0.1-alpha-*", 6: "Microsoft.AspNet.StaticFiles": "0.1-alpha-*", 7: "Microsoft.AspNet.Hosting": "0.1-alpha-*", 8: "Microsoft.AspNet.Server.WebListener": "0.1-alpha-*" 9: }, 10: "commands": { 11: "web": "Microsoft.AspNet.Hosting server=Microsoft.AspNet.Server.WebListener server.urls=http://localhost:22222" 12: }, 13: "configurations" : { 14: "net45" : { 15: }, 16: "k10" : { 17: "System.Diagnostics.Contracts": "4.0.0.0", 18: "System.Security.Claims" : "0.1-alpha-*" 19: } 20: } 21: } Below is "Startup.cs" which is the entry file of my ASP.NET vNext. What I need to do is to let my application use FileServerMiddleware. 1: using System; 2: using Microsoft.AspNet.Builder; 3: using Microsoft.AspNet.FileSystems; 4: using Microsoft.AspNet.StaticFiles; 5: 6: namespace Shaun.AspNet.Plugins.AngularServer.Demo 7: { 8: public class Startup 9: { 10: public void Configure(IBuilder app) 11: { 12: app.UseFileServer(new FileServerOptions() { 13: EnableDirectoryBrowsing = true, 14: FileSystem = new PhysicalFileSystem(System.IO.Path.Combine(AppDomain.CurrentDomain.BaseDirectory, "app")) 15: }); 16: } 17: } 18: } Next, I need to create "NuGet.Config" file in the PARENT folder so that when I run "kpm restore" command later it can find ASP.NET vNext NuGet package successfully. 1: <?xml version="1.0" encoding="utf-8"?> 2: <configuration> 3: <packageSources> 4: <add key="AspNetVNext" value="https://www.myget.org/F/aspnetvnext/api/v2" /> 5: <add key="NuGet.org" value="https://nuget.org/api/v2/" /> 6: </packageSources> 7: <packageSourceCredentials> 8: <AspNetVNext> 9: <add key="Username" value="aspnetreadonly" /> 10: <add key="ClearTextPassword" value="4d8a2d9c-7b80-4162-9978-47e918c9658c" /> 11: </AspNetVNext> 12: </packageSourceCredentials> 13: </configuration> Now I need to run "kpm restore" to resolve all dependencies of my application. Finally, use "k web" to start the application which will be a static file server on "app" sub folder in the local 22222 port. Support AngularJS Html5Mode AngularJS works well in previous demo. But you will note that there is a "#" in the browser address. This is because by default AngularJS adds "#" next to its entry page so ensure all request will be handled by this entry page. For example, in this case my entry page is "index.html", so when I clicked "View 1" in the page the address will be changed to "/#/view1" which means it still tell the web server I'm still looking for "index.html". This works, but makes the address looks ugly. Hence AngularJS introduces a feature called Html5Mode, which will get rid off the annoying "#" from the address bar. Below is the "app.js" with Html5Mode enabled, just one line of code. 1: 'use strict'; 2: 3: var app = angular.module('demo', ['ui.router']); 4: 5: app.config(['$stateProvider', '$locationProvider', function ($stateProvider, $locationProvider) { 6: $stateProvider.state('view1', { 7: url: '/view1', 8: templateUrl: 'view1.html', 9: controller: 'View1Ctrl' }); 10: 11: $stateProvider.state('view2', { 12: url: '/view2', 13: templateUrl: 'view2.html', 14: controller: 'View2Ctrl' }); 15: 16: // enable html5mode 17: $locationProvider.html5Mode(true); 18: }]); 19: 20: app.controller('View1Ctrl', function ($scope) { 21: }); 22: 23: app.controller('View2Ctrl', function ($scope) { 24: }); Then let's went to the root path of our website and click "View 1" you will see there's no "#" in the address. But the problem is, if we hit F5 the browser will be turn to blank. This is because in this mode the browser told the web server I want static file named "view1" but there's no file on the server. So underlying our web server, which is built by ASP.NET vNext, responded 404. To fix this problem we need to create our own ASP.NET vNext middleware. What it needs to do is firstly try to respond the static file request with the default StaticFileMiddleware. If the response status code was 404 then change the request path value to the entry page and try again. 1: public class AngularServerMiddleware 2: { 3: private readonly AngularServerOptions _options; 4: private readonly RequestDelegate _next; 5: private readonly StaticFileMiddleware _innerMiddleware; 6: 7: public AngularServerMiddleware(RequestDelegate next, AngularServerOptions options) 8: { 9: _next = next; 10: _options = options; 11: 12: _innerMiddleware = new StaticFileMiddleware(next, options.FileServerOptions.StaticFileOptions); 13: } 14: 15: public async Task Invoke(HttpContext context) 16: { 17: // try to resolve the request with default static file middleware 18: await _innerMiddleware.Invoke(context); 19: Console.WriteLine(context.Request.Path + ": " + context.Response.StatusCode); 20: // route to root path if the status code is 404 21: // and need support angular html5mode 22: if (context.Response.StatusCode == 404 && _options.Html5Mode) 23: { 24: context.Request.Path = _options.EntryPath; 25: await _innerMiddleware.Invoke(context); 26: Console.WriteLine(">> " + context.Request.Path + ": " + context.Response.StatusCode); 27: } 28: } 29: } We need an option class where user can specify the host root path and the entry page path. 1: public class AngularServerOptions 2: { 3: public FileServerOptions FileServerOptions { get; set; } 4: 5: public PathString EntryPath { get; set; } 6: 7: public bool Html5Mode 8: { 9: get 10: { 11: return EntryPath.HasValue; 12: } 13: } 14: 15: public AngularServerOptions() 16: { 17: FileServerOptions = new FileServerOptions(); 18: EntryPath = PathString.Empty; 19: } 20: } We also need an extension method so that user can append this feature in "Startup.cs" easily. 1: public static class AngularServerExtension 2: { 3: public static IBuilder UseAngularServer(this IBuilder builder, string rootPath, string entryPath) 4: { 5: var options = new AngularServerOptions() 6: { 7: FileServerOptions = new FileServerOptions() 8: { 9: EnableDirectoryBrowsing = false, 10: FileSystem = new PhysicalFileSystem(System.IO.Path.Combine(AppDomain.CurrentDomain.BaseDirectory, rootPath)) 11: }, 12: EntryPath = new PathString(entryPath) 13: }; 14: 15: builder.UseDefaultFiles(options.FileServerOptions.DefaultFilesOptions); 16: 17: return builder.Use(next => new AngularServerMiddleware(next, options).Invoke); 18: } 19: } Now with these classes ready we will change our "Startup.cs", use this middleware replace the default one, tell the server try to load "index.html" file if it cannot find resource. The code below is just for demo purpose. I just tried to load "index.html" in all cases once the StaticFileMiddleware returned 404. In fact we need to validation to make sure this is an AngularJS route request instead of a normal static file request. 1: using System; 2: using Microsoft.AspNet.Builder; 3: using Microsoft.AspNet.FileSystems; 4: using Microsoft.AspNet.StaticFiles; 5: using Shaun.AspNet.Plugins.AngularServer; 6: 7: namespace Shaun.AspNet.Plugins.AngularServer.Demo 8: { 9: public class Startup 10: { 11: public void Configure(IBuilder app) 12: { 13: app.UseAngularServer("app", "/index.html"); 14: } 15: } 16: } Now let's run "k web" again and try to refresh our browser and we can see the page loaded successfully. In the console window we can find the original request got 404 and we try to find "index.html" and return the correct result. Summary In this post I introduced how to use ASP.NET vNext to host AngularJS application as a static file server. I also demonstrated how to extend ASP.NET vNext, so that it supports AngularJS Html5Mode. You can download the source code here. Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

Read the article

December release of Microsoft All-In-One Code Framework is available now.

- by Jialiang

The code samples in Microsoft All-In-One Code Framework are updated on 2010-12-13. Download address: http://1code.codeplex.com/releases/view/57459#DownloadId=185534 Updated code sample index categorized by technologies: http://1code.codeplex.com/wikipage?title=All-In-One%20Code%20Framework%20Sample%20Catalog (it also allows you to download individual code samples instead of the entire All-In-One Code Framework sample package.) If it’s the first time that you hear about Microsoft All-In-One Code Framework, please watch the introduction video on YouTube http://www.youtube.com/watch?v=cO5Li3APU58, or read the introduction on our homepage http://1code.codeplex.com/, and this Port25 article http://port25.technet.com/archive/2010/01/18/the-all-in-one-code-framework.aspx. -------------- New ASP.NET Code Samples VBASPNETAJAXWebChat and CSASPNETAJAXWebChat Most of you have some experience in chatting with friends on the web. So you may want to know how to make a web chat application, it seems to be quite complicated. But ASP.NET gives you the power to buiild a chat room easily. In this code sample, we will construct our own web chat room with the amazing AJAX feature. The principle is simple relatively. As we all know, a base chat application need 4 base controls: one List control to show the chat room members, one List control to show the message list, one TextBox control to input messages and one button to send message. User inputs his message in the textbox first and then presses Send button, it will send the message to the server. The message list will update every 2 seconds to get the newest message list in the chat room from the server. We need to know, it is hard for us to make an AJAX web chat application like a windows form application because we cannot keep the connection after one web request ended. So a lot of events which communicates between client side and server side cannot be realized. The common workaround is to make web requests in every some seconds to check whether the server side has been updated. But another technique called COMET makes it possible. But it is different with AJAX and will not be talked in details in this KB. For more details about COMET, we can get some clues from the Reference. CSASPNETCurrentOnlineUserList and VBASPNETCurrentOnlineUserList This sample demos a system that needs to display a list of current online users' information. As a matter of fact, Membership.GetNumberOfUsersOnline Method can get the number of online users and there is a convenient approach to check whether the user is online by using Membership.GetUser(string userName).IsOnline property,however many asp.net projects are not using membership.So in this case,the sample shows how to display a list of current online users' information without using membership provider. It is not difficult to check whether the user is online by using session.Many projects tend to be used “Session_End” event to mark a user as “Offline”,however ,it may not be a good idea,because it can’t detect the user status accurately. In addition, "Session_End" event is only available in the "InProc" session mode. If you are storing session states in the State Server or SQL Server, "Session_End" event will never fire. To handle this issue, we need to save the user online status to a global DataTable or DataBase. In the sample application, define a global DataTable to store the information of online users.Use XmlHttpRequest in the pages to update and check user's last active time at intervals and also retrieve information on how many users are still online. The sample project can auto delete offline users' information from a global DataTable by checking users’ last active time. A step-by-step guide illustrating how to display a list of current online users' information without using membership provider: 1. Login page. Let user sign in and add current user’s information to a global datatable while Initialize the global datatable which used to store information of current online users. 2. Current online user list page. Use XmlHttpRequest in this page to update and check user's last active time at intervals and also retrieve information on how many users are still online. 3. If user closes the page without clicking the sign out link button ,the sample project can auto mark the user as offline and delete offline users' information from a global DataTable which used to store information of current online users by checking users’ last active time. Then the current online user list will be like this: CSASPNETIPtoLocation This sample demonstrates how to find the geographical location from an IP address. As we know, it is not hard for us to get the IP address of visitors via Request.ServerVariable property, but it is really difficult for us to know where they come from. To achieve this feature, the sample uses a free third party web service from http://freegeoip.appspot.com/, which returns the information about an IP address we send to the server in the format of XML, JSON or CSV. It makes all things easier. CSASPNETBackgroundWorker Sometimes we do an operation which needs long time to complete. It will stop the response and the page is blank until the operation finished. In this case, we want the operation to run in the background, and in the page, we want to display the progress of the running operation. Therefore, the user can know the operation is running and can know the progress. CSASPNETInheritingFromTreeNode In windows forms TreeView, each tree node has a property called "Tag" which can be used to store a custom object. Many customers want to implement the same tag feature in ASP.NET TreeView. This project creates a custom TreeView control named "CustomTreeView" to achieve this goal. CSASPNETRemoteUploadAndDownload and VBASPNETRemoteUploadAndDownload This code sample was created in response to a code sample request in our new code sample request frunction for customers. The code samples demonstrate uploading files to and downloading files from a remote HTTP or FTP server. In .NET Framework 2.0 and higher versions, there are some lightweight class libraries which support HTTP and FTP protocol transmission. By using these classes, we can achieve this programming requirement. CSASPNETImageEditUpload and VBASPNETImageEditUpload This demo will shows how to insert, edit and update a common image with the type of "jpg", "png", "gif" or "bmp" . We mainly use two different SqlDataSources with the same database to bind to GridView and FormView in order to establish the “cascading” effort. Besides we apply our self-made ImageHanlder to encoding or decoding images of different types, and use context to output the stream of images. We will explicitly assign the binary streams of images through the event of “FormView_ItemInserting” or “Form_ItemUpdating” to synchronize the stream both in what we can see on an aspx page as well as in what’s really stored in the database. WebBrowser Control, Network and other Windows General New Code Samples CSWebBrowserSuppressError and VBWebBrowserSuppressError The sample demonstrates how to make WebBrowser suppress errors, such as script error, navigation error and so on. CSWebBrowserWithProxy and VBWebBrowserWithProxy The sample demonstrates how to make WebBrowser use a proxy server. CSWebDownloadProgress and VBWebDownloadProgress The sample demonstrates how to show progress during the download. It also supplies the features to Start, Pause, Resume and Cancel a download. CppSetDesktopWallpaper, CSSetDesktopWallpaper and VBSetDesktopWallpaper This code sample application allows you select an image, view a preview (resized smaller to fit if necessary), select a display style among Tile, Center, Stretch, Fit (Windows 7 and later) and Fill (Windows 7 and later), and set the image as the Desktop wallpaper. CSWindowsServiceRecoveryProperty and VBWindowsServiceRecoveryProperty CSWindowsServiceRecoveryProperty example demonstrates how to use ChangeServiceConfig2 to configure the service "Recovery" properties in C#. This example operates all the options you can see on the service "Recovery" tab, including setting the "Enable actions for stops with errors" option in Windows Vista and later operating systems. This example also include how to grant the shut down privilege to the process, so that we can configure a special option in the "Recovery" tab - "Restart Computer Options...". New Office Development Code Samples CSOneNoteRibbonAddIn and VBOneNoteRibbonAddIn The code sample demonstrates a OneNote 2010 COM add-in that implements IDTExtensibility2. The add-in also supports customizing the Ribbon by implementing the IRibbonExtensibility interface. It is a skeleton OneNote add-in that developers can extend it to implement more functions. The code sample was requested by a customer in our code sample request service. We expect that this could help developers in the community. New Windows Shell Code Samples CppShellExtPreviewHandler, CSShellExtPreviewHandler and VBShellExtPreviewHandler In the past two months, we released the code samples of Windows Context Menu Handler, Infotip Handler, and Thumbnail Handler. This is the fourth part of the shell extension series: Preview Handler. The code samples demo the C++, C# and VB.NET implementation of a preview handler for a new file type registered with the .recipe extension. Preview handlers are called when an item is selected to show a lightweight, rich, read-only preview of the file's contents in the view's reading pane. This is done without launching the file's associated application. Windows Vista and later operating systems support preview handlers. To be a valid preview handler, several interfaces must be implemented. This includes IPreviewHandler (shobjidl.h); IInitializeWithFile, IInitializeWithStream, or IInitializeWithItem (propsys.h); IObjectWithSite (ocidl.h); and IOleWindow (oleidl.h). There are also optional interfaces, such as IPreviewHandlerVisuals (shobjidl.h), that a preview handler can implement to provide extended support. Windows API Code Pack for Microsoft .NET Framework makes the implementation of these interfaces very easy in .NET. The example preview handler provides previews for .recipe files. The .recipe file type is simply an XML file registered as a unique file name extension. It includes the title of the recipe, its author, difficulty, preparation time, cook time, nutrition information, comments, an embedded preview image, and so on. The preview handler extracts the title, comments, and the embedded image, and display them in a preview window. In response to many customers' request, we added setup projects in every shell extension samples in this release. Those setup projects allow you to deploy the shell extensions to your end users' machines. ---------- Download address: http://1code.codeplex.com/releases/view/57459#DownloadId=185534 Updated code sample index categorized by technologies: http://1code.codeplex.com/wikipage?title=All-In-One%20Code%20Framework%20Sample%20Catalog (it also allows you to download individual code samples instead of the entire All-In-One Code Framework sample package.) If you have any feedback for us, please email: [email protected]. We look forward to your comments.

Read the article

Integrate Bing Search API into ASP.Net application

- by sreejukg

Couple of months back, I wrote an article about how to integrate Bing Search engine (API 2.0) with ASP.Net website. You can refer the article here http://weblogs.asp.net/sreejukg/archive/2012/04/07/integrate-bing-api-for-search-inside-asp-net-web-application.aspx Things are changing rapidly in the tech world and Bing has also changed! The Bing Search API 2.0 will work until August 1, 2012, after that it will not return results. Shocked? Don’t worry the API has moved to Windows Azure market place and available for you to sign up and continue using it and there is a free version available based on your usage. In this article, I am going to explain how you can integrate the new Bing API that is available in the Windows Azure market place with your website. You can access the Windows Azure market place from the below link https://datamarket.azure.com/ There is lot of applications available for you to subscribe and use. Bing is one of them. You can find the new Bing Search API from the below link https://datamarket.azure.com/dataset/5BA839F1-12CE-4CCE-BF57-A49D98D29A44 To get access to Bing Search API, first you need to register an account with Windows Azure market place. Sign in to the Windows Azure market place site using your windows live account. Once you sign in with your windows live account, you need to register to Windows Azure Market place account. From the Windows Azure market place, you will see the sign in button it the top right of the page. Clicking on the sign in button will take you to the Windows live ID authentication page. You can enter a windows live ID here to login. Once logged in you will see the Registration page for the Windows Azure market place as follows. You can agree or disagree for the email address usage by Microsoft. I believe selecting the check box means you will get email about what is happening in Windows Azure market place. Click on continue button once you are done. In the next page, you should accept the terms of use, it is not optional, you must agree to terms and conditions. Scroll down to the page and select the I agree checkbox and click on Register Button. Now you are a registered member of Windows Azure market place. You can subscribe to data applications. In order to use BING API in your application, you must obtain your account Key, in the previous version of Bing you were required an API key, the current version uses Account Key instead. Once you logged in to the Windows Azure market place, you can see “My Account” in the top menu, from the Top menu; go to “My Account” Section. From the My Account section, you can manage your subscriptions and Account Keys. Account Keys will be used by your applications to access the subscriptions from the market place. Click on My Account link, you can see Account Keys in the left menu and then Add an account key or you can use the default Account key available. Creating account key is very simple process. Also you can remove the account keys you create if necessary. The next step is to subscribe to BING Search API. At this moment, Bing Offers 2 APIs for search. The available options are as follows. 1. Bing Search API - https://datamarket.azure.com/dataset/5ba839f1-12ce-4cce-bf57-a49d98d29a44 2. Bing Search API – Web Results only - https://datamarket.azure.com/dataset/8818f55e-2fe5-4ce3-a617-0b8ba8419f65 The difference is that the later will give you only web results where the other you can specify the source type such as image, video, web, news etc. Carefully choose the API based on your application requirements. In this article, I am going to use Web Results Only API, but the steps will be similar to both. Go to the API page https://datamarket.azure.com/dataset/8818f55e-2fe5-4ce3-a617-0b8ba8419f65, you can see the subscription options in the right side. And in the bottom of the page you can see the free option Since I am going to use the free options, just Click the Sign Up link for that. Just select I agree check box and click on the Sign Up button. You will get a recipt pagethat detail your subscription. Now you are ready Bing Search API – Web results. The next step is to integrate the API into your ASP.Net application. Now if you go to the Search API page (as well as in the Receipt page), you can see a .Net C# Class Library link, click on the link, you will get a code file named “BingSearchContainer.cs”. In the following sections I am going to demonstrate the use of Bing Search API from an ASP.Net application. Create an empty ASP.Net web application. In the solution explorer, the application will looks as follows. Now add the downloaded code file (“BingSearchContainer.cs”) to the project. Right click your project in solution explorer, Add -> existing item, then browse to the downloaded location, select the “BingSearchContainer.cs” file and add it to the project. To build the code file you need to add reference to the following library. System.Data.Services.Client You can find the library in the .Net tab, when you select Add -> Reference Try to build your project now; it should build without any errors. Add an ASP.Net page to the project. I have included a text box and a button, then a Grid View to the page. The idea is to Search the text entered and display the results in the gridview. The page will look in the Visual Studio Designer as follows. The markup of the page is as follows. In the button click event handler for the search button, I have used the following code. Now run your project and enter some text in the text box and click the Search button, you will see the results coming from Bing, cool. I entered the text “Microsoft” in the textbox and clicked on the button and I got the following results. Searching Specific Websites If you want to search a particular website, you pass the site url with site:<site url name> and if you have more sites, use pipe (|). e.g. The following search query site:microsoft.com | site:adobe.com design will search the word design and return the results from Microsoft.com and Adobe.com See the sample code that search only Microsoft.com for the text entered for the above sample. var webResults = bingContainer.Web("site:www.Microsoft.com " + txtSearch.Text, null, null, null, null, null, null); Paging the results returned by the API By default the BING API will return 100 results based on your query. The default code file that you downloaded from BING doesn’t include any option for this. You can modify the downloaded code to perform this paging. The BING API supports two parameters $top (for number of results to return) and $skip (for number of records to skip). So if you want 3rd page of results with page size = 10, you need to pass $top = 10 and $skip=20. Open the BingSearchContainer.cs in the editor. You can see the Web method in it as follows. public DataServiceQuery<WebResult> Web(String Query, String Market, String Adult, Double? Latitude, Double? Longitude, String WebFileType, String Options) { In the method signature, I have added two more parameters public DataServiceQuery<WebResult> Web(String Query, String Market, String Adult, Double? Latitude, Double? Longitude, String WebFileType, String Options, int resultCount, int pageNo) { and in the method, you need to pass the parameters to the query variable. query = query.AddQueryOption("$top", resultCount); query = query.AddQueryOption("$skip", (pageNo -1)*resultCount); return query; Note that I didn’t perform any validation, but you need to check conditions such as resultCount and pageCount should be greater than or equal to 1. If the parameters are not valid, the Bing Search API will throw the error. The modified method is as follows. The changes are highlighted. Now see the following code in the SearchPage.aspx.cs file protected void btnSearch_Click(object sender, EventArgs e) { var bingContainer = new Bing.BingSearchContainer(new Uri(https://api.datamarket.azure.com/Bing/SearchWeb/)); // replace this value with your account key var accountKey = "your key"; // the next line configures the bingContainer to use your credentials. bingContainer.Credentials = new NetworkCredential(accountKey, accountKey); var webResults = bingContainer.Web("site:microsoft.com" +txtSearch.Text , null, null, null, null, null, null,3,2); lstResults.DataSource = webResults; lstResults.DataBind(); } The following code will return 3 results starting from second page (by skipping first 3 results). See the result page as follows. Bing provides complete integration to its offerings. When you develop search based applications, you can use the power of Bing to perform the search. Integrating Bing Search API to ASP.Net application is a simple process and without investing much time, you can develop a good search based application. Make sure you read the terms of use before designing the application and decide which API usage is suitable for you. Further readings BING API Migration Guide http://go.microsoft.com/fwlink/?LinkID=248077 Bing API FAQ http://go.microsoft.com/fwlink/?LinkID=252146 Bing API Schema Guide http://go.microsoft.com/fwlink/?LinkID=252151

Search Results

Search found 8576 results on 344 pages for 'named constructor'.

Page 325/344 | < Previous Page | 321 322 323 324 325 326 327 328 329 330 331 332 | Next Page >

- by truncheon

- by bluesbrother

- by Herman Plani Ginting

- by lyborko

- by AndroidUser99

- by christian

- by Craig

- by ruruma

- by krunk

- by user3728352

- by Shaun

- by Rohan Kumar

- by LuckySlevin

- by Tom

- by Dooree

- by user1631503

- by teritriano

- by imran_ku07

- by Mladen Prajdic

- by pinaldave

- by Joe Mayo

- by Bil Simser

- by Shaun

- by Jialiang

- by sreejukg

< Previous Page | 321 322 323 324 325 326 327 328 329 330 331 332 | Next Page >