Search Results

Search found 9349 results on 374 pages for 'rpg maker xp'.

Page 325/374 | < Previous Page | 321 322 323 324 325 326 327 328 329 330 331 332  | Next Page >

• Improving Performance of RDP Over LAN

  - by Jared Brown

  Architecture: A deployment of 6 new HP thin clients (Windows XP Embedded) with TCP/IP access to several new HP servers (Windows 2003 Server). Each thin client is connected over fiber optic to a Gigabit Cisco switch, which the servers are connected to. There are 10/100 Ethernet to fiber converter boxes on each end of the fiber cables. Problem: Noticeable lag over RDP while using the Unigraphics CAD package. 3D models take .5 to 1 second to respond to mouse actions. Other Details: Network throughput on each thin client's RDP session is 7288 kbps. RDP connection settings - color setting: 15k, all themes, etc. turned off. Local and remote system performance stats are well within norms (CPU, Memory, and Network). Question: Are there newer versions of terminal services or RDP I can use on my existing OSes? Are there compression algorithms, etc. that are well suited for a high-bandwidth LAN? Are there valid alternatives that will yield higher performance (i.e. UltraVNC with drivers installed)? Are there TCP/IP tuning options I can exploit?

  Read the article

• Update to Lion, Cannot boot into Bootcamp partitions, but can use in Parallels

  - by Jon Jester

  Using Snow Leopard had boot camp partitions for both XP and Windows 7. These were both accessible through Parallels 7 or through direct boot through boot camp. Each is on a separate partitioned hard drive. Upgraded to Lion, both were still accessible through Parallels, but have not been able to directly boot into either. Unfortunately is important to me to be able to boot into a least the Windows 7 partition. Have tried virtually everything I can find online. Seen similar issues, but nothing where they were usable virtually but not directly. Nothing works. reFit, correcting the master boot records in Windows with command line, have wiped the Windows 7 partition clean and reinstalled Windows 7 several times 1st using Boot Camp4 drivers then using Boot Camp3 drivers. Have tried resizing the bootcamp partitions. When booting into the Boot Camp partitions directly will go all the way to seeing the desktop before it fails, where I get a Windows error screen. I can see all the disks and their appropriate partitions both in OS X disk utility as well as the Windows installer utility.

  Read the article

• Not recognizing second monitor after hibernate (Windows 7, Dell D630 laptop)

  - by Brooks Moses

  I have a Dell Latitude D630 laptop which I've recently updated to Windows 7 64-bit. (The Dell site confirms that it's Windows-7-compatible.) Normally it lives in a docking station with a second monitor connected to the DVI port on the docking station, and I use the second monitor in a multi-monitor configuration with the laptop screen. Sometimes I undock the laptop and use it separately. Here's the problem: If I hibernate the laptop while undocked, and then power it back up in the docking station, it does not recognize the second monitor. By which I mean that not only does it not share the desktop onto the second monitor, but if I go into the control panel for display settings and press "Detect", it does not even detect the existence of the second monitor. I can tell it to "use the VGA port anyway" for a second monitor, but the monitor is connected to a DVI port on the docking station, so that doesn't do anything useful. If I entirely reboot the laptop while it's connected to the docking station, it has no problem recognizing the second monitor and using it. But then, if I hibernate, undock, de-hibernate while undocked and rehibernate, and then re-dock and de-hibernate, it's back to not recognizing the second monitor again. I'm reasonably certain that this is not a limitation of the hardware; this worked fine on Windows XP. I'm currently using the Windows 7 driver for my video card. I attempted to use the video driver from the Dell website for this laptop, but Dell only provides Vista 64-bit drivers, not Windows 7 64-bit drivers. Their "Windows 7 compatibility" page suggests that the Vista drivers should work, but when I attempted to install the driver, it gave me a "this operating system not supported" error and refused to install. Any further ideas?

  Read the article

• Two domains, two servers, one dynamic IP address

  - by giantman

  I have two domains hi.org and bye.net and one dynamic IP address and two servers. I want to attach one domain bye.net to server1 and hi.org to server2. I'm using Apache wamp 2.0i. I have two servers behind one router with a dynamic IP address #httpd.conf file additions <IfModule mod_proxy.c> ProxyRequests Off <Proxy *> Order deny,allow Allow from all </Proxy> </IfModule> #vhost file additions NameVirtualHost *:80 #default <VirtualHost *:80> DocumentRoot "c:/wamp/www/fallback" </VirtualHost> # Server 1 <VirtualHost *:80> DocumentRoot "c:/wamp/www" ServerName h**p://bye.net ServerAlias bye.net </VirtualHost> # Server 2 <VirtualHost *:80> ProxyPreserveHost On ProxyPass / h**p://192.168.1.119/ DocumentRoot "g:/wamp/www" ServerName h**p://hi.org ServerAlias hi.org </VirtualHost> After doing all this I fallback to server1 only I don't get the page hi.org I only get the page bye.net, I don't even get the default fallback page which gets executed when a person enters IP address but not the domain name. I use Windows 7 (server 2) and Windows XP (server 1) UPDATE: I needed to remove DocumentRoot "g:/wamp/www" line :D it was there by mistake! things are working fine now. But one thing: the URL gets replaced by the local ip address any way to not make that happen?

  Read the article

• Running Mathematica-5 remotely

  - by oxinabox.ucc.asn.au

  I have Mathematica 5 - a powerful CAS. I have a cheap netbook (running Windows XP), wich not only is too slow to run mathmatica on, I doubt it has the harddrive space. I do however have remote access to a number of very powerful computers, (most of wich run variose Linuxes, but one of which is Windows Server 2008, though I'ld rather not use this one*). Mostly over SSH but other protocols can be arraged for some, I'm sure. So I'ld like to install Mathematica onto one of these machine and then run it remotely. Either from the command line via Putty or via some other method. I glanced through the mathematical documentation and read something about using some MathLink program, which links the front end installed on my computer to a remote kernel. Anyone have any experience with this? I'm not sure if this belongs here or in SuperUser. At the moment, it's being tinkered with, and when the tinkering stops it'll likely be used to run multiple thin terms. As compared to the Linux machines: I have access to a dual 2.4 Xeon with 3GB RAM, which the rest of the world seems to have completely forgotten about (runs freeBSD!).

  Read the article

• Mystery undeletable file

  - by Hugh Allen

  I can't delete C:\Config.Msi\75ce84f.rbf. it's not readonly, system or hidden it's not in use by another process (according to Process Explorer) the NT security permissions aren't the problem either - I am the owner and have Full Control ; as a double-check, the Effective Permissions tab shows that I have permission to delete. Yet trying to delete the file gives "Access is Denied" from both Explorer and cmd. I can however rename it or move it to another folder on the same drive. I can also read it and Virustotal says it's clean which is what I would expect (it's just a Windows Installer temp file - a copy of some DLL I think). The relevant line from Process Monitor is: 6:52:14.3726983 PM 112 Explorer.EXE SetDispositionInformationFile C:\Config.Msi\75ce84f.rbf CANNOT DELETE Delete: True Write 1232 Background: I'm using XP SP2. I recently repaired my Adobe Reader installation to make it the default browser plugin again instead of Foxit. (there seems to be no UI to do it otherwise?) So the installer did its thing and then asked to reboot. As is my habit when rebooting is inconvenient I declined the offer and ran pendmoves to find out what files the installer had scheduled to move / delete. It wanted to delete two files with .rbf extension (rollback files) located in C:\Config.msi\. (this applies to both even though I've been speaking about one). So I tried to delete them manually and couldn't. Does anyone have any ideas what could be preventing deletion? (and I don't think it's malware even though I'm not running AV at the moment)

  Read the article

• How do I add additional parameters to query string of a Firefox Search Plugin?

  - by Goto10

  I have just installed the DuckDuckGo add-on in Firefox 11.0, running on XP SP 3. I would like to add additional parameters to the query string. However, any changes I make are not reflected in the query string when doing a search. I found the duckduckgo.xml file at C:\Documents and Settings\User Name\Application Data\Mozilla\Firefox\Profiles\Profile Name.default\searchplugins. I opened it up with Notepad++ and added the line for kl=uk-en: <SearchPlugin xmlns="http://www.mozilla.org/2006/browser/search/" xmlns:os="http://a9.com/-/spec/opensearch/1.1/"> <os:ShortName>DuckDuckGo</os:ShortName> <os:Description>Search DuckDuckGo (SSL)</os:Description> <os:InputEncoding>UTF-8</os:InputEncoding> <os:Image width="16" height="16">data:image/x-icon;base64, -Removed to shorten-</os:Image> <os:Url type="text/html" method="GET" template="https://duckduckgo.com/"> <os:Param name="q" value="{searchTerms}"/> <os:Param name="kl" value="uk-en"/> </os:Url> </SearchPlugin> However, the kl=uk-en parameter does not appear in the query string when searching (despite several Firefox restarts).

  Read the article

• Wicked VNC Viewer acting out on Windows desktop and CentOS 6.3 server

  - by Johnny Lee

  What we have here is the only way to open the TightVNC viewer on this Windows XP desktop is to have a TigerVNC viewer open on the CentOS 6.3 server desktop. I know it sounds really weird and we’re looking for hints to make it go away. Any ideas? Here is the recipe: We are using Putty on the Windows desktop as SSH (Secure Shell) and a Terminal Emulator. We open and login to Putty then open a login to TightVNC viewer. After many failed attempts, much Googling, and lots of reading to no avail I decided to open the TigerVNC viewer on the CentOS 6.3 server by way of the GNOME desktop Application menu -- Internet tab. After opening and logging into the TigerVNC viewer on the CentOS 6.3 Server, Voila!! We have a remote desktop opened on the server. But what was an interesting discovery was that the TigerVNC viewer on the server had a request on the desktop that was not on the server desktop. This turned out to be a login request that once the password was entered it opened the TightVNC viewer on the Windows desktop. Weird huh? -Why is that password request showing up on the CentOS 6.3 server in the TigerVNC viewer as oppose to showing up on the Windows desktop when logging in using TightVNC viewer to the server?

  Read the article

• Should I upgrade to Symantec Endpoint Protection? [closed]

  - by Alex C.

  I'm the IT manager at an animal shelter in Upstate New York. We have a Windows network with about 50 desktops running Windows XP Pro. We used to use CA eTrust Antivirus, but that product didn't work too well (too many infections got through). About six months ago, we switched to using Symantec Antivirus Corporate Edition ver. 10.1.8.8000. If anything, the Symantec product is even worse. The last six weeks in particular have been very bad -- we've had about seven or eight PCs get hit with those malware infections that masquerade as antivirus software. In most of those cases, Symantec didn't even flag the malware at all. So... what gives with the Symantec Antivirus? As far as I can tell, it's installed correctly and downloading updated definitions nightly. I can upgrade to Symantec Endpoint Protection for $220 (we get non-profit pricing), but I don't want to do it if it's not going to be significantly better. Any advice? Should I switch to something else entirely? Thanks!

  Read the article

• Run Explorer in SYSTEM account on Windows Vista or 7 using Sysinternal’s psexec tool?

  - by Rob

  Has anyone been successful at launching an instance of Windows Explorer in the SYSTEM account on Windows Vista or 7? It is possible to do this on XP, but I haven't been able to get it to completely work in Vista or 7. Trying to launch Explorer as SYSTEM into session 1 (my user session) results in Explorer exiting immediately and returning an error code of 1. I can launch Explorer as SYSTEM into session 0 with the following command: psexec -i 0 -s explorer That will create an instance of explorer running as SYSTEM with a taskbar and start menu on the hidden session 0 desktop, but won't let you open a file browser window. If you switch to the hidden session 0 desktop and try to open an Explorer window from there to browse files, the following error message appears: "The server process could not be started because the configured identity is incorrect. Check the username and password." I have set the following registry key to 1 for my user account and the SYSTEM account: \Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced\SeparateProcess There has got to be a way to make this work? If it is not possible, can anyone explain why? -Rob

  Read the article

• How to tell if Microsoft Works is 32 or 64 bit? Please Help!

  - by Bill Campbell

  Hi, I am trying to convert one of our apps to run on Win7 64 bit from XP 32 bit. One of the things that it uses is Excel to import files. It's a little complicated since it was using Microsoft.Jet.OLEDB.4.0 (Excel). I found Office 14 (2010) has a 64bit version I can download. I downloaded Office 2010 Beta but it didn't seem to install Microsoft.ACE.OLEDB.14.0. I found that I could download 2010 Office System Driver Beta: Data Connectivity Components which has the ACE.OLEDB.14 in it but when I try to install it, the installed tells me "You cannot install the 64-bit version of Access Database engine for Microsoft Office 2010 because you currently have 32-bit Office products installed". How do I determine what 32bit office products this is reffering to? My Dell came with Microsoft Works installed. I don't know if this is 32 or 64 bit. Is there anyway to tell? I don't want to uninstall this if it's not the problem and I'm not sure what else might be the problem. Any help would be appreciated! thanks, Bill

  Read the article

• Which apache/mysql/php package is best for windows?

  - by crosenblum

  I have tried appservnetwork, was the best so far, but I haven't seen them do an update in ages, EasyPHP is just slow to load always. Wamp and Xamp, all put in their description that is not for production. I do not plan to host publicly this site or site's I am working on. But I do want a fast loading apache/mysql/php server for development purposes. I used to really like WLMP, which is Lighttpd for Windows, but that project seems unupdated or abandoned. I refuse to use IIS, but i have no desire to get into any wars over it. I run windows xp sp3 at my home pc. I will need to have a web server setup for professional work, as well as some fun websites I am working on. I just want it fast enough, so i can run it via localhost, and not take forever to load in the browser. Thank you... I plan mostly do php programming and perhaps coldfusion via this.

  Read the article

• Force netsh/arp binding multicast IP addres with specific MAC address

  - by Olivier

  I would like to setup an binding from an IP address to a MAC address using netsh. Goal is to bond an IP address which is a multicast address (224.224.x.y) to a given MAC address (which is NOT the calculated one from the multicast IP address : 01:00:5e:X:Y:Z It used to work with Windows XP (was it a bug that used to be "perfect" for my needs?), but Windows 7/8/8.1 forces the MAC address to the calculated one instead of letting me put what I want! (http://nettools.aqwnet.com/ipmaccalc/ipmaccalc.php shows MAC address calculation for multicast IP address) Thus I'm doing the following. Listing existing mappings: netsh.exe interface ip show neighbors "Ethernet" Interface 12 : Ethernet Internet address Physical address Type 224.0.0.22 01-00-5e-XX-YY-ZZ static Then adding my interface mapping manually: netsh.exe interface ip add neighbors "Ethernet" "224.xxx.yyy.zzz" "00-80-EE-UU-VV-WW" Finally, listing again my mappings: netsh.exe interface ip show neighbors "Ethernet" Interface 12 : Ethernet Internet address Physical address Type 224.0.0.22 01-00-5e-XX-YY-ZZ static **224.xxx.yyy.zzz 01-00-5e-UU-VV-WW static** As you can see, the MAC Address of the second entry (the one I just made) has been dynamically replaced by the calculated MAC Address corresponding to my IP Address... Calculation is done as follow (and displayed in hexa): UU=(xxx-128) VV=yyy WW=zzz But I don't want that behavior. My IP address and MAC address cannot be changed, and I must associate them accurately. Does anybody know how to disable MAC address substitution/calculation in netsh? Thanks, Olivier.

  Read the article

• Sending Adobe PDF attachments from Adobe Reader (in Outlook 2003) takes too long

  - by White Island

  I have a customer who is using Outlook 2003 (Microsoft Online Services) and Adobe reader 9+. When they send a PDF from Adobe reader to Outlook (via the Send as attachment to e-mail feature in Adobe), it freezes for 30 seconds to 5 minutes before the new e-mail pops up with the PDF attachment. I'm pretty sure the issue is on the Outlook side of things, as I've tried Adobe reader 8 and Foxit Reader with the same results (Windows XP/7 doesn't seem to make a difference, either). I tried Outlook in safe mode on the first (Win7) machine I was working on, and the e-mail attachment worked a lot faster, but when I tried to replicate the results on another machine, one wouldn't go into safe mode, the other didn't seem to show a difference. In an effort to fix the problem in Outlook normal mode, I tried disabling all add-ins, Com add-in (Office Communicator is the only one), reading pane, Word 2003 as e-mail editor... but none of these seemed to address the issue. Does anyone have any other ideas? I need to get this resolved as soon as possible, and it doesn't seem practical to make them run in safe mode. :P

  Read the article

• Windows 7: Windows Firewall: Logging/Notifying on Outgoing Request Attempts

  - by Maxim Z.

  I'm trying to configure Windows Firewall with Advanced Security to log and tell me when programs are trying to make outbound requests. I previously tried installing ZoneAlarm, which worked wonders for me with this in XP, but now, I'm unable to install ZA on Win7. My question is, is it possible to somehow monitor a log or get notifications when a program tries to do that if I set all outbound connections to auto-block, so that I can then create a specific rule for the program and block it.? Thanks! UPDATE: I've enabled all the logging options available through the Properties windows of the Windows Firewall with Advanced Security Console, but I am only seeing logs in the %systemroot%\system32\LogFiles\Firewall\pfirewall.log file, not in the Event Viewer, as the first answer suggested. However, the logs that I can see only tell me the request's or response's destination IP and whether the connection was allowed or blocked, but it doesn't tell me what executable it comes from. I want to find out the file path of the executable that each blocked request comes from. So far, I haven't been able to.

  Read the article

• Server taking too long to respond error

  - by DCJones

  This is my first post on serverFault and my first entry in to web server configuration. The hardware and software. CPU: GenuineIntel, Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz OS: Linux 2.6.18-128.el5 Memory: 2Gb Background. I am running a small database (MySQL), around 1000 records with each record containing 44 fields. At the start of each day “00:01” the tables are cleared and populated with fresh data. The are 10 remote PCs all running Winodws XP and Firefox internet browser. All remote PC’s are connected to the internet using a min 4Gb broadband connection. Each remote PC runs a URL which displays a dynamic page of data which is refreshed every 20 seconds. This is a continual process 24 hours a day. I problem I am having is on odd occasions throughout the day the PC browser error with “Server taking too long to respond error”. What I am trying to find our is if I have the correct setting in the httpd.conf file on the server. Any help or advice anyone can provide would be very helpful. Best regards Dereck Server config file: httpd.conf ServerRoot "/etc/httpd" PidFile run/httpd.pid Timeout 120 KeepAlive On MaxKeepAliveRequests 200 KeepAliveTimeout 5 <IfModule prefork.c> StartServers 8 MinSpareServers 5 MaxSpareServers 20 ServerLimit 256 MaxClients 254 MaxRequestsPerChild 4000 </IfModule> <IfModule worker.c> StartServers 2 MaxClients 150 MinSpareThreads 25 MaxSpareThreads 150 ThreadsPerChild 25 MaxRequestsPerChild 0 </IfModule>

  Read the article

• Internal Use Chat/Desktop Platform

  - by Malnizzle

  I did some looking, but I didn't see a SF question directly related to this. I need to find a platform for internal/LAN use only for chat and desktop sharing. We got a lot people having to get up and walk over to another person's office for simple items, and we could save a lot of time collectivity if we had a solution where we had a client app similar to gchat or AIM, where one could right click a name and request a desktop sharing session (to or from). This wouldn't be for product presentation or long training sessions, and wouldn't need more than 2 people in the session. We use GoToMeeting for this. I've looked at TeamViewer, and they got the features I want (plus a lot more features that wouldn't help) and seem more geared to large enterprise support, and it is not exactly cheap. Also looked at OCS some as well, but it seems heavy for what I am trying to do. I don't need anything relating to phone usage. If the general opinion says otherwise, I could talked back into OCS if I am wrong about weight of the product. We use GoToAssist for remote support of clients (which I am a fan of), and I don't it fits here, correct me if I am wrong. All the workstations are XP/7. Thanks!

  Read the article

• Windows file sharing with a private LAN when a public VPN is connected?

  - by netvope

  OS: Windows Vista My LAN interface is configured as a "private network". I want to have all the sharing and discovery features (Network Discovery, File Sharing, Public Folder Sharing, Printer Sharing, Password Protected Sharing, and Media Sharing), so I enabled them all. My VPN interfaces are configured as "public networks", and I do NOT want to have any of the above features. Now the problem is that if I disabled these sharing features while a VPN is connected, it affects both interfaces. I guess the Network and Sharing Center is probably an oversimplified tool that may not support multiple interfaces. Where can I tell Windows to enable sharing features for the private networks and not the public networks? For file sharing, I think I can disable "File and Printer Sharing for MS Networks" in each of the VPNs' properties. However, I will need to disable it every time I add a new VPN. Moreover, I can't find how to disable Media Sharing by this way. If this can be more easily done in Windows XP or 7, please let me know.

  Read the article

• VMware Workstation executes nonexisting and outdated File

  - by RED SOFT ADAIR-StefanWoe

  I execute a command line program from a VM (VMware 7.1.1) with Windows XP. The executable file is located on the host machine. If i start a command line in the VM, using a drive mounted as .host\SharedFolders i see the following: D:\projects\myProgram\WinRel>dir myProgram.exe 02.09.2010 21:15 245.760 myProgram.exe D:\projects\myProgram\WinRel>myProgram.exe Processing BuildFeb 26 2009 This is wrong! The whole execution of the program behaves like the version that is outdated more than one year! I triple checked that there is no confusion or anything If i start the Program on the host or if i even start it from the VM using a UNC Path, it shows the last build date and executes as expected: C:\>dir \\myMachine\drive_d\projects\myProgram\WinRel\myProgram.exe 02.09.2010 21:15 245.760 myProgram.exe C:\>\\myMachine\drive_d\projects\myProgram\WinRel\myProgram.exe Processing Build: Sep 2 2010 Can this behavior somehow be explained? There MUST be a cache for the host mounted drive. The program it executes does not exist anymore! If i remove it from the host, the VM can not execute it anymore. If i restore it, the behavior becomes the same again.

  Read the article

• Ubuntu 9.10 Only Sees 244 MB RAM, while BIOS and Windows Sees 1.5 GB

  - by nicorellius

  I have 1.5 GB of RAM installed on an older Dell, Pentium 4. I just installed Ubuntu 9.1 and the system is only seeing 244 MB of RAM, even though there is 1.5 GB on the system. The BIOS sees all of it. I ran a Knoppix disc and it only saw 25 MB upon booting. I made no particular changes to the installation taht would affect this. I looked through the BIOS and the only setting I could see was the AGP aperture. Not even sure what this is. Anyone know where I went wrong? I also tried moving the memory modules around on the board. Booted with the 1 GB stick, still saw 244 MB. NOTE - This same system, except for the hard drive, had Windows XP running on it. The user who ran it said that the RAM was good and always showed 1.5 GB. Here is sudo cat /proc/meminfo MemTotal: 250064 kB MemFree: 3832 kB Buffers: 13356 kB Cached: 52216 kB SwapCached: 19676 kB Active: 91504 kB Inactive: 113884 kB Active(anon): 60572 kB Inactive(anon): 82156 kB Active(file): 30932 kB Inactive(file): 31728 kB Unevictable: 0 kB Mlocked: 0 kB HighTotal: 0 kB HighFree: 0 kB LowTotal: 250064 kB LowFree: 3832 kB SwapTotal: 4883720 kB SwapFree: 4781204 kB Dirty: 496 kB Writeback: 720 kB AnonPages: 123796 kB Mapped: 23368 kB Slab: 17248 kB SReclaimable: 7932 kB SUnreclaim: 9316 kB PageTables: 5304 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 5008752 kB Committed_AS: 740372 kB VmallocTotal: 770600 kB VmallocUsed: 26008 kB VmallocChunk: 662544 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 4096 kB DirectMap4k: 114128 kB DirectMap4M: 147456 kB

  Read the article

• PHP Startup: Unable to load dynamic library 'C:"\php\php_mysql.dll' - The specified module could not be loaded

  - by Tiny

  I'm trying to upgrade php 5.4.14 from php 5.4.3 in wamp server 2.2e. I have downloaded php-5.4.14-Win32-VC9-x86 (thread safe). Extracted it under C:\wamp\bin\php. Copied wampserver.conf from C:\wamp\bin\php\php5.4.3 to C:\wamp\bin\php\php5.4.14. Renamed php.ini-development to phpForApache.ini. -The port number the wamp server has been changed in the http.conf file to 8087 from its default 80. This is mentioned here though it is about upgrading from php 5.3.5 to php 5.4.0. After this, Restarting of the wamp server and services all over again has all been done and those two versions appeared in the menu php-versions (which is opened when the icon of the server is clicked). But when I attempt to enable a library like php_mysql or php_mysqli, a warning message box appears. PHP Startup: Unable to load dynamic library 'C:"\php\php_mysql.dll' - The specified module could not be loaded. I have also tried to removing the semicolon before them in the php.ini file but to no avail. I'm running Microsoft Windows XP Professional Version 2002, service pack 3. Where might be the problem? EDIT: I have changed extension_dir from C:\php to c:\wamp\bin\php\php5.4.14\ext\ in php.ini as the answer below indicates and the library is now loaded correctly but it says, 1045 - Access denied for user 'root'@'localhost' (using password: YES) though the user name and the password are the same as they are in MySQL in the config.inc.php file under phpmyadmin. I have also tried to restart MySQL56 service from Control Panel-Services(Local) but it keeps giving the same error. Does someone know why this happens?

  Read the article

• What's the best way to telnet from a remote Windows PC without using RDP?

  - by Rob D.

  Three Networks: 10.1.1.0 - Mine 172.1.1.0 - My Branch Office 172.2.2.0 - My Branch Office's VOIP VLAN. My PC is on 10.1.1.0. I need to telnet into a Cisco router on 172.2.2.0. The 10.1.1.0 network has no routes to 172.2.2.0, but a VPN connects 10.1.1.0 to 172.1.1.0. Traffic on 172.1.1.0 can route to 172.2.2.0. All PCs on 172.1.1.0 are running Windows XP. Without disrupting anyone using those PCs, I want to open a telnet session from one of those PCs to the router on 172.2.2.0. I've tried the following: psexec.exe \\branchpc telnet 172.2.2.1 psexec.exe \\branchpc cmd.exe telnet 172.2.2.1 psexec.exe \\branchpc -c plink -telnet 172.2.2.1 Methods 1 and 2 both failed because telnet.exe is not usable over psexec. Method 3 actually succeeded in creating the connection, but I cannot login because the session registers my carriage return twice. My password is always blank because at the "Username:" prompt I'm effectively typing: Routeruser[ENTER][ENTER] It's probably time to deploy WinRM... Does anyone know of any other alternatives? Does anyone know how I can fix plink.exe so it only receives one carriage return when I use it over psexec?

  Read the article

• Print jobs sent to server OK, but then get deleted

  - by Paul Morrison

  I have 2 HP computers, one running Win XP SP3, one running Win7. I have a Lexmark X4270 All-in-One printer attached to the Win7 machine via a USB port. I can print OK from the Win 7 machine, but when I print from the WinXP machine, the print job shows up in both print queues (showing the same number of bytes - which is good!), but then the status gets changed to "Deleting - Sent to printer", and that status shows up in both print queues. The print job then stays there until I do a cancel, followed by a system restart. FWIW the owner is shown as Guest, but I have permission for Everyone set to print... I believe I have up-to-date drivers; I don't believe it's a firewall problem. What I would like to see is the Win7 machine's reason for deleting my print jobs - is there a diagnostic tool available? Also, I notice that the port for this printer on the WinXP machine is set to USB001 - I would have thought something like \servername\sharedprinter would be more appropriate - and I can see that in the list of ports, but the system doesn't let me change the port name from USB001... Could someone shed some light? I have spent hours on this! TIA BTW I can do file sharing, no problem!

  Read the article

• Windows Server 2008 Remote Desktop printing blank pages

  - by Colin Pickard

  I have a Windows Server 2008 (not R2) machine which has problems with redirected printing. Clients connecting via Remote Desktop have their printers redirected and appearing for them to print to, but printing from applications on the server to local printers is giving blank pages, missing pages, or pages with headers/footers but no middle section. The issues are consistant for similar prints, but sometimes other prints and/or applications will work correctly. I have installed PDFCreator locally on the server, and the same print jobs sent by the same application appear correctly in the PDFs. Printing that PDF via the redirected printer prints correctly. I have tried the following: Installing drivers. I’ve installed several drivers different drivers, for both the client and server operating system and architecture, on the client and the server. Reinstalling the printers. I’ve tried reinstalling on remote print servers, the clients, and the host server, and tried different client machines. Granting everyone full permissions on the print spool folder on the server. Editing the registry to forward non-USB ports (http://support.microsoft.com/kb/302361) None of these have made any difference. The clients are using Windows 7 or Windows XP and none of them have any issues with printing locally. Any ideas? Thanks!

  Read the article

• Ripping CD Audio simultaneously from 2 drives on one PC via USB or PATA - rip accuracy preserved?

  - by Rob

  I'm considering ripping audio (reading audio) from CDs using 2 drives simultaneously to speed up the process of ripping the CDs - i.e. 2 at a time rather than 1. Are there any issues with achieving maximum rip accuracy? In general I wondered if people have tried this and if the simultaneous streams from both rip activities would overload the host machine and cause packet loss or read retries resulting in a sub-standard CD-DA Audio CD rip? If it just means the rip is slightly slower (but still faster than sequentially doing one rip followed by another) but still of maximum accuracy then that is OK for me. I will be using dbPowerAmp to rip the CDs and converting to FLAC lossless format. Specific examples: There are 2 machines I intend to do it on: A Toshiba NB100 1.6Ghz Atom netbook, 2Gb RAM, running Windows XP Home with 1 external LG DVD/CD burner and external 1 LG Blu-ray burner attached via USB 2.0, ripping to the machine's 5400rpm internal hard drive. This rips from one CD drive very well, more than adequate, it is a nippy, fast little machine for its specification. A Desktop PC running Windows 7 Home Premium with MSI P4M900M2-L/ MS-7255v2.0 motherboard and 1.86Ghz Intel Core 2 Duo E6320, 7200rpm hard drive and 2Gb RAM, with an internal LG PATA DVD/CD burner (master) and a Philips DVD/CD burner (slave) on the same PATA bus (perhaps separate buses would be another option to consider here). Thoughts?

  Read the article

< Previous Page | 321 322 323 324 325 326 327 328 329 330 331 332  | Next Page >