Search Results

Search found 34060 results on 1363 pages for 'webpage access'.

Page 325/1363 | < Previous Page | 321 322 323 324 325 326 327 328 329 330 331 332  | Next Page >

• How can I delete virtual networks from command line?

  - by David Cobb

  I have Hyper-V Server 2008 R2 (without GUI) running at my colo for a week. I was connected via RDP and could use the menu interface and command line. I figured out how to connect Hyper-V Manager from my Win7 laptop (THANK YOU HVREMOTE!), and created and installed my VM. I created a virtual network that didn't work (no connectivity from my VM) so I created another using different settings, and now have lost access to the Hyper-V host. No ping, no RDP. Since I don't have console access, I cannot troubleshoot. I believe if I deleted the Virtual Networks I'd regain access, but I need a command line instruction for this, that the staff onsite could enter to accomplish this. I find no help anywhere obvious (MSDN, etc), the keywords are too general. Can anyone refer me to simple steps how to do this over command line or with the menu based interface on the console?

  Read the article

• How can i resolve all external addresses to internal address?

  - by Darian

  I am currently setting up a Linux server for a WIFI access-point. When ever someone who is connected to the hotspot/access-point? tries to reload a page they get forced onto the one page. Note: this wont have internet access! ie: user tries accessing www.google.com = it returns 192.168.1.200 or example.domain I've read that "dnsmasq" can be used to redirect any external addresses to an internal address. but haven't had any luck. Anyone have an example of a config for "dnsmasq"? I have also read that this can be done through a proxy?

  Read the article

• Bypass IIS Basic Authentication for localhost

  - by George

  I'd like to have a website authenticated with basic auth, but then also allow the website to access itself locally. That is, I want to allow unauthenticated access only from localhost. In IIS I have only basic authentication enabled (not worrying about SSL for now), and I have the correct file system permissions such that outside users can login successfully and view the website. I have tried setting IIS_IUSR as owner of the directory, and added IUSR with modify permissions, however I'm still getting a 401 error when the website tries to access itself. Anyone have any idea how to get this to work?

  Read the article

• Name Servers changed over 48 hrs ago and site is still down

  - by Solomon Closson

  Ok, I just recently changed Name Servers for my site (Oct. 29th): http://dream-portal.net but there is an issue, the name servers were changed from godaddy, however, the DNS is being hosted elsewhere. Godaddy states that the DNS is resolving the site to www.dream-portal.net and that is making it inaccessible from the DNS on the other host and that they can't do anything because I'm not hosting DNS with godaddy. I've contacted the other host and they say that everything is fine, however, people are not able to access the site and I can't access it from my work computer. I can only access it from my home computer. From my work computer it says that the page can not be found. What should I do? What can I do? Other people reported problems with the site here: http://www.simplemachines.org/community/index.php?topic=487592.msg3629960#msg3629960

  Read the article

• UNRAID V4.7: Lost write permission on Win7/Android devices

  - by JROC

  I'm currently running V4.7 and I haven't touched any of the user or share settings, and I'm periodically losing read.write permission on both my windows 7 pc and my android tablet connecting over the wireless. Sometime I can access my shares and see the folder directories, but when attempting to open a folder windows denies me access saying I don't have the proper permission. This is after I have logged in with my main account that has full read/write access of everything, same on my android device. This all started when I attempted to delete a large amount of files (8gb) to make more room and about half way through started getting permission errors. What could be causing this? Thanks

  Read the article

• UNRAID V4.7: Lost write permission on Win7/Android devices

  - by JROC

  I'm currently running V4.7 and I haven't touched any of the user or share settings, and I'm periodically losing read.write permission on both my windows 7 pc and my android tablet connecting over the wireless. Sometime I can access my shares and see the folder directories, but when attempting to open a folder windows denies me access saying I don't have the proper permission. This is after I have logged in with my main account that has full read/write access of everything, same on my android device. This all started when I attempted to delete a large amount of files (8gb) to make more room and about half way through started getting permission errors. What could be causing this? Thanks

  Read the article

• How can I set my wireless router to run on a time schedule?

  - by Joshua Robison

  I have a Buffalo AirStation WZR-HP-G301NH I am able to access it's settings via 192.168.11.1 I'm connecting wirelessly with toshiba i686 laptop on Linux Mint Debian with service pack 3 and i686 dual core kernel This is just my home network but I know that there must be a way for large industries to shut their networks down or lock out their network access temporarily based on a time schedule, automatically. Like mon - fri the network provides access from 8am to 10pm and then automatically shuts down. I want this to affect all the computers accessing this netowork... basically all my families computers so that the internet just automatically shuts down at bedtime. I am running Linux Mint Debian and so maybe I need to make a cron job or something but does anyone know how big industries implement this and how I can do it privately? TIA

  Read the article

• Is it possible to shutdown a remote computer running Windows 7 via Telnet?

  - by Ryan Shripat

  I've successfully connected to my Windows 7 desktop over wifi via Telnet from an XP Home netbook. To login, I use the following command: telnet -l "win7desktop\win7user" win7desktop win7user in this case is an Administrator on win7desktop and is also a member of the Telnet Clients Group. The problem I have is that when I attempt to shut down win7desktop by issuing the following command: shutdown /s ...at the Telnet prompt, I get an Access Denied error: Access is denied.(5) Is it possible to shutdown a remote computer running Windows 7 via Telnet? If so, what do I need to do to get around the Access is denied error?

  Read the article

• fail2ban with Cloudflare

  - by tatersalad58

  I'm using fail2ban to block web vulnerability scanners. It is working correctly when visiting the site if CloudFlare is bypassed, but a user can still access it if going through it. I have mod_cloudflare installed. Is it possible to block users with IPtables when using Cloudflare? Ubuntu Server 12.04 32-bit Access.log: 112.64.89.231 - - [29/Aug/2012:19:16:01 -0500] "GET /muieblackcat HTTP/1.1" 404 469 "-" "-" Jail.conf [apache-probe] enabled = true port = http,https filter = apache-probe logpath = /var/log/apache2/access.log action = iptables-multiport[name=apache-probe, port="http,https", protocol=tcp] maxretry = 1 bantime = 30 # Test Apache-probe.conf [Definition] failregex = ^<HOST>.*"GET \/muieblackcat HTTP\/1\.1".* ignoreregex =

  Read the article

• windows 7 issues with local domain name

  - by Phill

  Until recently my operating system was XP where for the purpose of development and testing of php and zen cart I set up xampp that included apache http server and mercury mail server I also made changes to C:\Windows\System32\drivers\etc\hosts as follows: 127.0.0.1 www.zen.com # For browser access 127.0.0.1 mail.mercury.com # For email access 127.0.0.1 mercury.com # For mercury mail server This allowed the use of www.zen.com in the address bar of my browser rather than 'localhost' and mail.mercury.com to access email via thunderbird. All was well. Then I installed windows7, I made all the mods and again everything appeared to run as expected.Then I turned off my wireless modem causing all working local connections to fail. Localhost in the address bar still works but not www.zen.com and thunderbird 'cannot find mail.mercury.com' Is there some way to overcome what ever is causing this.

  Read the article

• RemoteApp cannot connect to webapp

  - by user58505

  I have just set up a Server 2008 R2 machine with Remote Desktop Services. It's all running on the one server, just for a single application, which works fine locally and when using Remote Desktop Web Access on the local network. However, when accessing it over the Internet, you can log on to RD Web Access fine, but when running the RemoteApp you get the message: RemoteApp Disconnected The remote computer could not be found. Please contact your helpdesk about this error. The application and all Remote Desktop services are on a single machine. I have purchased and installed a GoDaddy Cert. It works like a charm in the local network, but I get the above message when trying to access through rdweb How can I enable the RemoteApp to function outside the local network? I think there is one or 2 steps I left out??.. Please help...

  Read the article

• SQL Server User Mapping - Limit view of databases for a user

  - by Jaime

  Hi there, I am adding a new Login with SQL Server Authentication. I set its Server Role as public and then went into User Mapping, selecting the only database this user should have access to. I then change the Default Schema to dbo and made this user the db_owner. I then connect to the instance using the new user's credentials and I can see not only the database he should have access to but all the other attached databases. How can I limit this user to just see the database he has access to? Thanks in advance!

  Read the article

• Can't perform ODBC connection to MySQL server on local network

  - by Emmanuel

  I have a wamp server running on LAN ip address 192.168.1.101 . From the browser on my PC which is on the LAN I can access the webserver and have as well set the phpmyadmin.conf file to be able to access the phpmyadmin interface. This works smoothly. On the wamp server I have a database which I'd need to access from any PC on the LAN using the MySQL Connector/ODBC. The problem is that I do not manage to setup the connection correctly. Here are the paramenters I use: Data Source Name: test_connection Description: test conenction Server: 192.168.1.101 Port: 3306 User: root Password: Database: The error message I get is the following: Connection Failed: [HY000][MySQL][ODBC 5.1 Driver]Can's connect to MySql server on '192.168.1.101' (10060) Would anybody have a hint to set up correctly the connection?

  Read the article

• Cisco Pix does not let traffic pass from outside to inside even though ACL permits

  - by Rickard

  I have tried to make my pix 515 allow traffic from outisde interface to inside, but despite permitting ACL's, it doesn't seem to let traffic through. (It is letting traffic out as it should though) I am have tried both of the following: access-list acl_in extended permit tcp any host 10.131.73.2 eq www and access-list acl_in extended permit ip any any None of them help, but I can access 10.131.73.2 from any host on the inside network. This is a one single host on the inside that should every now and then have an HTTP server running for development purpouses, so it doesn't need to reside on DMZ (and as far as I know, I can't place it on DMZ either as it's in the same subnet as the other ip's I have. Could I have missed anything? I am using PIX Version 8.0(4) My current running config looks like this: http://pastebin.com/TvRFyDrF Hope someone can help me get this working.

  Read the article

• Open Port on Windows Server 2008

  - by user1827348

  I have an external server and I installed a new Service on it. The service is running and I can access it locally. When I tried to get access to it locally, all worked just fine. but when I try to reach it from my laptop over the internet, I get the message, that the port is blocked. I added a rule to the windows firewall that all connections to that port are allowed but it still doesnt work. there is so many things in google that didnt help me, thats why I am asking specifically. I do acutally not know how to google for that right because i am not that into server configs and so on. Can anybody help me, what I have to do, to be able to access that port? From outside.

  Read the article

• Adding new users

  - by user36651

  I have an FTP server that is running Fedora Core release 6 (Zod) the problem is I need to create new users and I have root access saved in WinSCP, so I can run useradd or adduser via the fake terminal, but every time I try to use passwd <username> it crashes on me and won't allow me to change or add a password. my questions are this: --Is there a place the adduser script stores the default passwords? or what is the default? --Is there another way I can set passwords for new users? I don't want to change the root pass because EVERYONE has root access and it's saved in WinSCP (I'm sure you see the problem here...) I want to create User accounts for each user instead of giving them all blatant root access. the goal here is to gradually migrate everyone over to their new account and then change the root p/w. Any suggestions would be greatly appreciated.

  Read the article

• Apache Errordocument (custom 503 page) works intermittently

  - by jimmycavnz

  We have Apache 2.2 running on Windows 2k3 and 2k8 R2 as a reverse proxy to downstream applications. Some of these applications may go offline during off-peak hours so we've implemented a custom 503 page like so: ErrorDocument 503 /error/serverTimeout.html ErrorDocument 504 /error/serverTimeout.html (the error directory is in Apaches's htdocs folder) If I make these changes, restart apache and then access the down application on firefox I see the custom page as expected. I then access it using my IE browser, it also works. If I close my IE browser and access it again, I get Apache's standard "Service Temporarily Unavailable" message instead of my custom page. Once I receive the standard error message, I never get the custom page again until I restart Apache. I've put the server on debug and I can't see any difference between the requests which return the custom error page and the requests which return the standard error message. Is there some weird proxy setting which is messing with the errordocument configuration? Any ideas?

  Read the article

• Domains propagation issues.

  - by Andrew

  Hello to all. I got very strange issue, really weird. On weekend, May 9th I changed my server location from US to UK. Of course, everything works correctly excluding domains. There's something wrong. I got few domains on this server but I still cannot access them. When I try from the other location it works correctly. The most funny situation is that everything is working correctly from my girlfriend's work, about 500 meters from our house, but they have another ISP. It also works when I access the domains via proxy server. I checked who.is informations and everything seems to be working. On Sunday and today morning I was able to access my domains but only for a while. When I refreshed website second time I got error "Firefox was not able to connect server". Since then I'm still getting this error. Could it be my ISP fault? Regards, Andrew

  Read the article

• Custom 403 Error page not showing

  - by Rahul Sekhar

  I want to restrict access to certain folders (includes, xml and logs for example) and so I've given them 700 permissions, and all files within them 600 permissions. Firstly, is this the right approach to restrict access? I have a .htaccess file in my root that handles rewriting and error documents. There are two pages in the root - 403.php and 404.php - for 403 and 404 errors. And I have these rules added to my .htaccess file: ErrorDocument 404 /404.php ErrorDocument 403 /403.php Now, the 404 page works just fine. The 403 page does not show when I try to access the 'includes' folder - I get the standard apache 403 error page instead, saying 'Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.' However, when I try going to the .htaccess file (in the web root) in my browser, I get my custom 403 error page. Why is this happening?

  Read the article

• Web browsing over SSH

  - by Alex Marshall

  Hello, I have something of a difficult situation : our company has a webserver in a remote data center that's, at the moment, only accessible by SSH and the firewall is not easily modifiable because the techs at the data center are unreliable and unreachable lately (not my choice of data center, and switching is not an option at the moment). Are there any browsers or plugins out there that will let me browse over an SSH connection ? I can browse with links and lynx on the SSH command line, but that doesn't give me access to various functionality I need, and it's too hard to find things in the web application running on a Tomcat server on the box that I need access to. Does anybody have any suggestions ? We're already working on getting direct access to the web application by having the firewall opened up, but I need something better in the mean time.

  Read the article

• Newbie one: Virtual Networks - Hyper-V - Remote Destktop - Only one phisical NIC

  - by josecortesp

  Hello everyone, I'll try to explain my situation and I'll apreciate any help: I have a phisical server (quad core, 4Gb ram, 1TB raid 10, etc) with Win Server 2008 R2 enterprise, running IIS, Printing, etc... Also, I want to set up 2 virtual Servers with 2008 R2 standart one with SQL Server and the other with Team Foundation. What i need is: Being able to access from inside the private phisical network, to Remote Desktops on each of the Virtual and the phisical Servers Had Access from the outside, using a router and port Forwarding, to the TFS server and the IIS server (one is virtualized, the other is phisical) This is it, but note that I only have one Phisical Nic. How do I configure this to work. When i set up the hyper-v role, on the wizard something like it showed up but I don't remmember what i choose, and right now, I cannot access none of the servers from remote desktop, not even from the phisical private network. Can anybody point me, what can i do? Thanks in advance (sorry 4 my english, i'm a spanish talker and my english isn't that good)

  Read the article

• What are good Usenet account providers, both free and paid?

  - by alok

  I used to access newsgroups via the Berlin university's facilities - they provided free acccounts, but that stopped a few years ago. Since then I have been using Google groups to access newsgroups but it's not the same thing as accessing Usenet via a newsreader like Pan. If any of you still access newsgroups via news readers, where is your account? Please mention if it's free or paid, if paid, how much do you pay, as well as how satisfied you are with the service. Edit: While binaries may be a reason to have a Usenet account, that's not the motivation for me. It is the ability to use the newsreader client features that Google groups doesn't provide.

  Read the article

• Report Builder 2.0 - Creating DataSet - User Not Authorized

  - by Fahad

  Hello, we are currently using SQL Server Reporting Services and we would like to use Report Builder so our customers can create reports themselves. I have created a User on the server. I have added this user to the SQLServerMSSQLUser and SQLServerReportServerUser groups. I have given this User db_datareader access to the required database and to the Reporting Services database. I've also tried giving the User db_owner access to the Reporting Services db's. And on the Report Manager, this User is a System_User, but has all access (every checkbox is checked). When I connect using Report Builder, I can select the Report Model to create a DataSource, but when I try to create a DataSet, I get the following error: An error occurred while connection to datasource 'DataSource1'. The details are: 'User Not Authorized'. Does anyone know what server permissions I forgot to set? I'm assuming it's a Windows permissions issue because I do not see any database login errors in the event logs.

  Read the article

• How to display programs, started by TSWA Remoteapp, inside a browser instead of directly on the desk

  - by richardboon

  For those not familiar with Terminal Services Web Access and Resulting Internet Communication in Windows Server 2008, here’s a brief overview: technet.microsoft.com/en-us/library/cc754502(WS.10).aspx The problem (I am trying to solve), can be seen in the picture of step 16, where the application is display directly right on the desktop [see link below]: http://blogs.technet.com/askcore/archive/2008/07/22/publishing-the-hyper-v-management-interface-using-terminal-services.aspx I am in the process of setting up Terminal Service Web Access RemoteApp for our company. Users only want remoteapp and needs to see the remote program running within/contain-inside the browser. They don’t want to see or access the whole desktop [as the case with remote desktop, which can be displayed inside a browser].

  Read the article

• Joomla 1.5 Media Manager sets incorrect file permissions when uploading

  - by Scott Mayfield

  Howdy all, I have a Joomla 1.5 installation running on Windows Server 2008, installed via the Web Platform Installer. When uploading images with the media manager (native uploader, not the flash bulk uploader), the files arrive on the server correctly, but are given incorrect permissions. Specifically, the IIS_IUSRS group is not given access to the file. I might be incorrect about what group/user is SUPPOSED to get access to the files, but so far, I've found that unless I give IIS_IUSRS access to the uploaded files, they won't appear on the site or in the media manager (appear as broken images). Once I give IIS_IUSRS permission to the files, they work fine. So far, all the research I've done has led me to linux specific fixes that involve either changing the umask on the server, or directly modifying the Joomla codebase to add an appropriate chmod command to the upload process, but I really don't want to modify Joomla directly. I have to believe there's a setting here somewhere that will do the job, either on the Joomla or Windows side of the equation. Any thoughts? Scott

  Read the article

< Previous Page | 321 322 323 324 325 326 327 328 329 330 331 332  | Next Page >