Search Results

Search found 9494 results on 380 pages for 'least squares'.

Page 326/380 | < Previous Page | 322 323 324 325 326 327 328 329 330 331 332 333  | Next Page >

• Customer owes me half my payment. Should I take ownership of his AWS account for charging? How?

  - by Cawas

  Background They paid me my first half (back in April 15th) before even we could get into an agreement. Very nice of him! Then I've finished the 2 weeks job of setting up the servers, using his AWS credentials he had just bought. I waited for another 2 weeks for everything settling up, and it was all running fine. He did what he needed with his sftp account, everyone were happy. Now, it has been almost 2 months since I've finished the job and I still didn't get the 2nd half. I must assume, it's not much money (about U$400, converted), but it would help me pay the bills at least. Heck, the Amazon bills they are paying are little less than that (for now). Measures I'm wondering how I can go to charge him now. First thought, of course, would be taking everything down and say "pay now, or be doomed". If that's not good enough, then I lost it. I have no contracts and I doubt I could get a law suit in this country for such a low value based only on emails. And I don't really want to get too agressive here - there might be a business chance in the future and I don't want to ruin it. Second though would be just changing the password. But then he probably could gain access again by some recovery means. That's where my question may mainly relay. How can I do it and not leaving any room for recovery from his side? I even got the first AWS "your account was created" mail from himself, showing me I could begin my job, back then. Lastly, do you have any other idea on what I can and what I should do in this case? Responding to Answers Please, consider reading the current answers and comments. This is not a very simple case. I've considered many, many options (including all lawful ones) before considering this ones I've listed here, and I am willing to take the loss and all that. That's not the point. The point is being practical here. I will call him again and talk about it. I will do terrorism on getting lawyers and getting contract. I am ready to go all forth while I have time and energy for it. But, in practice, there is this extra thing I can do to assure myself of the work I've done. I can basically take it back and delete everything! I'd only take his password because I can find no other way to do it within Amazon. Maybe, contacting Amazon and explaining the situation? I don't know. Give me ideas on this technical side! And thank everyone for the attention and helping me clarifying the issue so far! :)

  Read the article

• How much is a subscriber worth?

  - by Tom Lewin

  This year at Red Gate, we’ve started providing a way to back up SQL Azure databases and Azure storage. We decided to sell this as a service, instead of a product, which means customers only pay for what they use. Unfortunately for us, it makes figuring out revenue much trickier. With a product like SQL Compare, a customer pays for it, and it’s theirs for good. Sure, we offer support and upgrades, but, fundamentally, the sale is a simple, upfront transaction: we’ve made this product, you need this product, we swap product for money and everyone is happy. With software as a service, it isn’t that easy. The money and product don’t change hands up front. Instead, we provide a service in exchange for a recurring fee. We know someone buying SQL Compare will pay us $X, but we don’t know how long service customers will stay with us, or how much they will spend. How do we find this out? We use lifetime value analysis. What is lifetime value? Lifetime value, or LTV, is how much a customer is worth to the business. For Entrepreneurs has a brilliant write up that we followed to conduct our analysis. Basically, it all boils down to this equation: LTV = ARPU x ALC To make it a bit less of an alphabet-soup and a bit more understandable, we can write it out in full: The lifetime value of a customer equals the average revenue per customer per month, times the average time a customer spends with the service Simple, right? A customer is worth the average spend times the average stay. If customers pay on average $50/month, and stay on average for ten months, then a new customer will, on average, bring in $500 over the time they are a customer! Average spend is easy to work out; it’s revenue divided by customers. The problem comes when we realise that we don’t know exactly how long a customer will stay with us. How can we figure out the average lifetime of a customer, if we only have six months’ worth of data? The answer lies in the fact that: Average Lifetime of a Customer = 1 / Churn Rate The churn rate is the percentage of customers that cancel in a month. If half of your customers cancel each month, then your average customer lifetime is two months. The problem we faced was that we didn’t have enough data to make an estimate of one month’s cancellations reliable (because barely anybody cancels)! To deal with this data problem, we can take data from the last three months instead. This means we have more data to play with. We can still use the equation above, we just need to multiply the final result by three (as we worked out how many three month periods customers stay for, and we want our answer to be in months). Now these estimates are likely to be fairly unreliable; when there’s not a lot of data it pays to be cautious with inference. That said, the numbers we have look fairly consistent, and it’s super easy to revise our estimates when new data comes in. At the very least, these numbers give us a vague idea of whether a subscription business is viable. As far as Cloud Services goes, the business looks very viable indeed, and the low cancellation rates are much more than just data points in LTV equations; they show that the product is working out great for our customers, which is exactly what we’re looking for!

  Read the article

• Web Safe Area (optimal resolution) for web app design?

  - by M.A.X

  I'm in the process of designing a new web app and I'm wondering for what 'Web Safe Area' should I optimize the app layout and design. By Web Safe Area I mean the actual area available to display the website in the browser (which is influenced by monitor resolution as well as the space taken up by the browser and OS) I did some investigation and thinking on my own but wanted to share this to see what the general opinion is. Here is what I found: Optimal Display Resolution: w3schools web stats seems to be the most referenced source (however they state that these are results from their site and is biased towards tech savvy users) http://www.w3counter.com/globalstats.php (aggregate data from something like 15,000 different sites that use their tracking services) StatCounter Global Stats Display Resolution (Stats are based on aggregate data collected by StatCounter on a sample exceeding 15 billion pageviews per month collected from across the StatCounter network of more than 3 million websites) NetMarketShare Screen Resolutions (marketshare.hitslink.com) (a web analytics consulting firm, they get data from browsers of site visitors to their on-demand network of live stats customers. The data is compiled from approximately 160 million visitors per month) Display Resolution Summary: There is a bit of variation between the above sources but in general as of Jan 2011 looks like 1024x768 is about 20%, while ~85% have a higher resolution of at least 1280x768 (1280x800 is the most common of these with 15-20% of total web, depending on the source; 1280x1024 and 1366x768 follow behind with 9-14% of the share). My guess would be that the higher resolution values will be even more common if we filter on North America, and even higher if we filter on N.American corporate users (unfortunately I couldn't find any free geographically filtered statistics). Another point to note is that the 1024x768 desktop user population is likely lower than the aforementioned 20%, seeing as the iPad (1024x768 native display) is likely propping up those number (the app I'm designing is flash based, Apple mobile devices don't support flash so iPad support isn't a concern). My recommendation would be to optimize around the 1280x768 constraint (*note: 1280x768 is actually a relatively rare resolution, but I think it's a valid constraint range considering that 1366x768 is relatively common and 1280 is the most common horizontal resolution). Browser + OS Constraints: To further add to the constraints we have to subtract the space taken up by the browser (assuming IE, which is the most space consuming) and the OS (assuming WinXP-Win7): Win7 has the biggest taskbar footprint at a height of 40px (XP's and Vista's is 30px) The default IE8 view uses up 25px at the bottom of the screen with the status bar and a further 120px at the top of the screen with the windows title bar and the browser UI (assuming the default 'favorites' toolbar is present, it would instead be 91px without the favorites toolbar). Assuming no scrollbar, we also loose a total of 4px horizontally for the window outline. This means that we are left with 583px of vertical space and 1276px of horizontal. In other words, a Web Safe Area of 1276 x 583 Is this a correct line of thinking? I'm really surprised that I couldn't find this type of investigation anywhere on the web. Lots of websites talk about designing for 1024x768, but that's only half the equation! There is no mention of browser/OS influences on the actual area you have to display the site/app. Any help on this would be greatly appreciated! Thanks. EDIT Another caveat to my line of thinking above is that different browsers actually take up different amounts of pixels based on the OS they're running on. For example, under WinXP IE8 takes up 142px on top of the screen (instead the aforementioned 120px for Win7) because the file menu shows up by default on XP while in Win7 the file menu is hidden by default. So it looks like on WinXP + IE8 the Web Safe Area would be a mere 572px (768px-142-30-24=572)

  Read the article

• Move over DFS and Robocopy, here is SyncToy!

  - by andywe

  Ever since Windows 2000, I have always had the need to replicate data to multiple endpoints with the same content. Until DFS was introduced, the method of thinking was to either manually copy the data location by location, or to batch script it with xcopy and schedule a task. Even though this worked (and still does today), it was cumbersome, and intensive on the network, especially when dealing with larger amounts of data. Then along came robocopy, as an internal tool written by an enterprising programmer at Microsoft. We used it quite a bit, especially when we could not use DFS in the early days. It was received so well, it made it into the public realm. At least now we could have the ability to determine what files had changed and only replicate those. Well, over time there has been evolution of this ideal. DFS is obviously the Windows enterprise class service to do this, along with BrancheCache..however you don’t always need or want the power of DFS, especially when it comes to small datacenter installations, or remote offices. I have specific data sets that are on closed or restricted networks, that either have a security need for this, or are in remote countries where bandwidth is a premium. FOr this, I use the latest evolution for one off replication names Synctoy. Synctoy is from Microsoft, seemingly released in 2009, that wraps a nice GUI around setting up a paired set of folders (remember the mobile briefcase from Windows 98?), and allowing you the choice of synchronization methods. 1 way, or 2 way. Simply create a paired set of folders on the source and destination, choose your options for content, exclude any file types you don’t want to replicate, and click run. Scheduling is even easier. MS has included a wrapper for doing just this so all you enter in your task schedule in the SynToyCMD.exe, a –R as an argument, and the time schedule. No more complicated command lines or scripts.   I find this especially useful when I use MS backup to back up a system volume, but only want subsets of backup information of a data share and ONLY when that dataset has changed. Not relying on full backups and incremental. An example of this is my application installation master share. I back this up with SyncToy because I do not need multiple backup copies..one copy elsewhere suffices to back it up. At home, very useful for your pictures, videos, music, ect..the backup is online and ready to access, not waiting for you to restore a backup file, and no need to institute a domain simply to have DFS.'   Do note there is a risk..if you accidently delete a file and do not catch this before the next sync, then depending on your SyncToy settings, you can indeed lose that file as the destination updates..so due diligence applies. I make it a rule to sync manly one way…I use my master share for making changes, and allow the schedule to follow suit. Any real important file I lock down as read only through file permissions so it cannot be deleted unless I intervene.   Check out the tool and have some fun! http://www.microsoft.com/en-us/download/details.aspx?DisplayLang=en&id=15155

  Read the article

• Test your internet connection - Emtel Fixed Broadband

  Already at the begin of April, I had a phone conversation with my representative at Emtel Ltd. about some upcoming issues due to the ongoing construction work in my neighbourhood. Unfortunately, they finally raised the house two levels above ours, and of course this has to have a negative impact on the visibility between the WiMAX outdoor unit on the roof and the aimed access point at Medine. So, today I had a technical team here to do a site survey and to come up with potential solutions. Short version: It doesn't look good after all. The site survey Well, the two technicians did their work properly, even re-arranged the antenna to check the connection with another end point down at La Preneuse. But no improvements. Looks like we are out of luck since the construction next door hasn't finished yet and at the moment, it even looks like they are planning to put at least one more level on top. I really wonder about the sanity of the responsible bodies at the local district council. But that's another story. Anyway, the outdoor unit was once again pointed towards Medine and properly fixed with new cable guides (air from the sea and rust...). Both of them did a good job and fine-tuned the reception signal to a mere 3 over 9; compared to the original 7 over 9 I had before the daily terror started. The site survey has been done, and now it's up to Emtel to come up with (better) solutions. Well, I wouldn't mind to have an unlimited, symmetric 3G/UMTS or even LTE connection. Let's see what they can do... Testing the connection There are several online sites available which offer you to check certain aspects of your internet connection. Personally, I'm used to speedtest.net and it works very well. I think it is good and necessary to check your connection from time to time, and only a couple of days ago, I posted the following on Emtel's wall at Facebook (21.05.2013 - 14:06 hrs): Dear Emtel, could you eventually provide an answer on the miserable results of SpeedTest? I chose Rose Hill (Hosted by Emtel Ltd.) as testing endpoint... Sadly, no response to this. Seems that the marketing department is not willing to deal with customers on Facebook. Okay, over at speedtest.net you can use their Flash-based test suite to check your connection to quite a number of servers of different providers world-wide. It's actually very interesting to see the results for different end points and to compare them to each other. The results Following are the results of Rose Hill (hosted by Emtel) and respectively Frankfurt, Germany (hosted by Vodafone DE): Speedtest.net result of 30.05.2013 between Flic en Flac and Rose Hill, Mauritius (Emtel - Fixed Broadband) Speedtest.net result of 30.05.2013 between Flic en Flac and Frankfurt, Germany (Emtel - Fixed Broadband) Luckily, the results are quite similar in terms of connection speed; which is good. I'm currently on a WiMAX tariff called 'Classic Browsing 2', or Fixed Broadband as they call it now, which provides a symmetric line of 768 Kbps (or roughly 0.75 Mbps). In terms of downloads or uploads this means that I would be able to transfer files in either direction with approximately 96 KB/s. Frankly speaking, thanks to compression, my choice of browser and operating system I usually exceed this value and I have download rates up to 120 KB/s - not too bad after all. Only the ping times are a little bit of concern. Due to the difference in distance, or better said based on the number of hubs between the endpoints, they indicate the amount of time that it takes to send a package from your machine to the remote server and get a response back. A lower value is better, and usually the ping is less than 300 ms between Mauritius and Europe. The alternatives in Mauritius Not sure whether I should note this done because for my requirements there are no alternatives to Emtel WiMAX at the moment. It would be great to have your opinion on the situation of internet connectivity in Mauritius. Are there really alternatives? And if so, what are the conditions?

  Read the article

• Security Access Control With Solaris Virtualization

  - by Thierry Manfe-Oracle

  Numerous Solaris customers consolidate multiple applications or servers on a single platform. The resulting configuration consists of many environments hosted on a single infrastructure and security constraints sometimes exist between these environments. Recently, a customer consolidated many virtual machines belonging to both their Intranet and Extranet on a pair of SPARC Solaris servers interconnected through Infiniband. Virtual Machines were mapped to Solaris Zones and one security constraint was to prevent SSH connections between the Intranet and the Extranet. This case study gives us the opportunity to understand how the Oracle Solaris Network Virtualization Technology —a.k.a. Project Crossbow— can be used to control outbound traffic from Solaris Zones. Solaris Zones from both the Intranet and Extranet use an Infiniband network to access a ZFS Storage Appliance that exports NFS shares. Solaris global zones on both SPARC servers mount iSCSI LU exported by the Storage Appliance.  Non-global zones are installed on these iSCSI LU. With no security hardening, if an Extranet zone gets compromised, the attacker could try to use the Storage Appliance as a gateway to the Intranet zones, or even worse, to the global zones as all the zones are reachable from this node. One solution consists in using Solaris Network Virtualization Technology to stop outbound SSH traffic from the Solaris Zones. The virtualized network stack provides per-network link flows. A flow classifies network traffic on a specific link. As an example, on the network link used by a Solaris Zone to connect to the Infiniband, a flow can be created for TCP traffic on port 22, thereby a flow for the ssh traffic. A bandwidth can be specified for that flow and, if set to zero, the traffic is blocked. Last but not least, flows are created from the global zone, which means that even with root privileges in a Solaris zone an attacker cannot disable or delete a flow. With the flow approach, the outbound traffic of a Solaris zone is controlled from outside the zone. Schema 1 describes the new network setting once the security has been put in place. Here are the instructions to create a Crossbow flow as used in Schema 1 : (GZ)# zoneadm -z zonename halt ...halts the Solaris Zone. (GZ)# flowadm add-flow -l iblink -a transport=TCP,remote_port=22 -p maxbw=0 sshFilter  ...creates a flow on the IB partition "iblink" used by the zone to connect to the Infiniband.  This IB partition can be identified by intersecting the output of the commands 'zonecfg -z zonename info net' and 'dladm show-part'.  The flow is created on port 22, for the TCP traffic with a zero maximum bandwidth.  The name given to the flow is "sshFilter". (GZ)# zoneadm -z zonename boot  ...restarts the Solaris zone now that the flow is in place.Solaris Zones and Solaris Network Virtualization enable SSH access control on Infiniband (and on Ethernet) without the extra cost of a firewall. With this approach, no change is required on the Infiniband switch. All the security enforcements are put in place at the Solaris level, minimizing the impact on the overall infrastructure. The Crossbow flows come in addition to many other security controls available with Oracle Solaris such as IPFilter and Role Based Access Control, and that can be used to tackle security challenges.

  Read the article

• Top 5 characteristics Recruiters are looking for

  - by Maria Sandu

  Of course many skills and characteristics recruiters are looking for are job specific. But whether you are a graduate fresh out of college or seasoned in the workplace, recruiters are also looking for generic skills and attitude to see whether you are a good fit to the company. So make sure you prepare and show through examples that you have these skills. 1. Drive/passion Liking the job you are applying for is paramount and something recruiters are always looking for. Show and prove your drive for the role and/or the field you are applying for. Always be prepared to pitch yourself, this shows your drive in the role you are applying for. 2. Communication skills People often make the mistake by thinking this skill is related to how good they are able to talk about their background and expertise. This is important, but as least as important is it that you listen well to questions that are asked. Make sure you answer to the point and ask questions if you want questions to be clarified. This shows your interest in the role and the ability to communicate clearly. This also helps you building trust with the recruiter every time you speak to him/her. 3. Confidence Recruiters are looking for the best candidate for the job. So if you don’t think you are the best candidate why should the recruiter? Show with confidence, without being arrogant (think about building trust), why you are the right person for the job. Confidence also shows in your answers to difficult questions. Be confident enough to explain why some experiences went wrong and how you learnt from them. If you don’t have a direct explanation on a question, it is better to ask for a second to think instead of a random answer. 4. Vision The main reason to hire graduates for many companies is that graduates are perceived to be flexible. The organisation will train and up skill you in the direction best suitable for the organisation. However the most intense learning path is realised when you also know where you want to go. Companies are often happy to accommodate you to support with training and development, but if you don’t have a clear vision on what you want to achieve for yourself and what value you bring to the company, recruiters can decide you are not the right candidate as they are afraid you aren’t going to stay in the company. 5. Business awareness For every job you apply you will get challenged on your knowledge and interest for the market and business they are in. All companies add value in different ways in their respective markets. So make sure you are aware of what a company is doing, what their goal is and why and how they exist and how you can add value for the company in the role you are applying for. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

• Life at Oracle Russia: Stanislav, Tech Sales Manager

  - by Maria Sandu

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Oracle is a place that brings together talented people from various countries and with a diversity of backgrounds. We often invite our employees to speak about their life at Oracle as we think It is important to share an insight into what working for our company looks like. This time we asked Stanislav to speak about his experience at Oracle. He is Technology Sales Manager at Oracle Russia. He joined the company in July 2011 as a Sales Representative for the Financial sector and had previously worked for another American IT company. He was promoted to a Management position in 2013. “I have been in this Industry for 15 years and I am now Technology Sales Manager, covering Database, BI and Fusion Middleware products. What I’ve learned in my role is that respect is one of the most important values a good professional should have. By respecting and embracing everyone’s opinions, we create a very good work environment that encourages innovation and change. It eventually leads to a stronger team where people listen to each other and value each other’s opinion. On the other hand, It is mandatory to have good knowledge about the area you work in and to continously seek to improve your expertise. Last but not least, working as a team is a top priority and It is something that I’ve learned at Oracle. There’s little you can achieve by yourself comparing to what you can do when you’re part of a team.” Stanislav shared the top three words that best describe his team and those were: professional, dynamic and smart. “The team I manage is a very professional, dynamic and smart one. I am really proud to work with such talented people! They are an asset to the Oracle business because they are the very best in the IT industry worldwide!” When asked why he would apply at Oracle if he was looking for a job, Stanislav responded “I would say because Oracle is a legend of the IT industry. It is a very dynamic company where you can fulfill your potential and gain extremely valuable knowledge. No doubt this is the number 1 IT company!” We invite you to explore our career opportunities on oracle.com/careers and to discover more stories about the life at Oracle on our blog. You can get the latest updates about careers within Oracle by following Oracle LinkedIn, CareersatOracle Facebook or joinOracleEMEA Twitter. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

• Parameterized StreamInsight Queries

  - by Roman Schindlauer

  The changes in our APIs enable a set of scenarios that were either not possible before or could only be achieved through workarounds. One such use case that people ask about frequently is the ability to parameterize a query and instantiate it with different values instead of re-deploying the entire statement. I’ll demonstrate how to do this in StreamInsight 2.1 and combine it with a method of using subjects for dynamic query composition in a mini-series of (at least) two blog articles. Let’s start with something really simple: I want to deploy a windowed aggregate to a StreamInsight server, and later use it with different window sizes. The LINQ statement for such an aggregate is very straightforward and familiar: var result = from win in stream.TumblingWindow(TimeSpan.FromSeconds(5))               select win.Avg(e => e.Value); Obviously, we had to use an existing input stream object as well as a concrete TimeSpan value. If we want to be able to re-use this construct, we can define it as a IQStreamable: var avg = myApp     .DefineStreamable((IQStreamable<SourcePayload> s, TimeSpan w) =>         from win in s.TumblingWindow(w)         select win.Avg(e => e.Value)); The DefineStreamable API lets us define a function, in our case from a IQStreamable (the input stream) and a TimeSpan (the window length) to an IQStreamable (the result). We can then use it like a function, with the input stream and the window length as parameters: var result = avg(stream, TimeSpan.FromSeconds(5)); Nice, but you might ask: what does this save me, except from writing my own extension method? Well, in addition to defining the IQStreamable function, you can actually deploy it to the server, to make it re-usable by another process! When we deploy an artifact in V2.1, we give it a name: var avg = myApp     .DefineStreamable((IQStreamable<SourcePayload> s, TimeSpan w) =>         from win in s.TumblingWindow(w)         select win.Avg(e => e.Value))     .Deploy("AverageQuery"); When connected to the same server, we can now use that name to retrieve the IQStreamable and use it with our own parameters: var averageQuery = myApp     .GetStreamable<IQStreamable<SourcePayload>, TimeSpan, double>("AverageQuery"); var result = averageQuery(stream, TimeSpan.FromSeconds(5)); Convenient, isn’t it? Keep in mind that, even though the function “AverageQuery” is deployed to the server, its logic will still be instantiated into each process when the process is created. The advantage here is being able to deploy that function, so another client who wants to use it doesn’t need to ask the author for the code or assembly, but just needs to know the name of deployed entity. A few words on the function signature of GetStreamable: the last type parameter (here: double) is the payload type of the result, not the actual result stream’s type itself. The returned object is a function from IQStreamable<SourcePayload> and TimeSpan to IQStreamable<double>. In the next article we will integrate this usage of IQStreamables with Subjects in StreamInsight, so stay tuned! Regards, The StreamInsight Team

  Read the article

• concurrency::extent<N> from amp.h

  - by Daniel Moth

  Overview We saw in a previous post how index<N> represents a point in N-dimensional space and in this post we'll see how to define the N-dimensional space itself. With C++ AMP, an N-dimensional space can be specified with the template class extent<N> where you define the size of each dimension. From a look and feel perspective, you'd expect the programmatic interface of a point type and size type to be similar (even though the concepts are different). Indeed, exactly like index<N>, extent<N> is essentially a coordinate vector of N integers ordered from most- to least- significant, BUT each integer represents the size for that dimension (and hence cannot be negative). So, if you read the description of index, you won't be surprised with the below description of extent<N> There is the rank field returning the value of N you passed as the template parameter. You can construct one extent from another (via the copy constructor or the assignment operator), you can construct it by passing an integer array, or via convenience constructor overloads for 1- 2- and 3- dimension extents. Note that the parameterless constructor creates an extent of the specified rank with all bounds initialized to 0. You can access the components of the extent through the subscript operator (passing it an integer). You can perform some arithmetic operations between extent objects through operator overloading, i.e. ==, !=, +=, -=, +, -. There are operator overloads so that you can perform operations between an extent and an integer: -- (pre- and post- decrement), ++ (pre- and post- increment), %=, *=, /=, +=, –= and, finally, there are additional overloads for plus and minus (+,-) between extent<N> and index<N> objects, returning a new extent object as the result. In addition to the usual suspects, extent offers a contains function that tests if an index is within the bounds of the extent (assuming an origin of zero). It also has a size function that returns the total linear size of this extent<N> in units of elements. Example code extent<2> e(3, 4); _ASSERT(e.rank == 2); _ASSERT(e.size() == 3 * 4); e += 3; e[1] += 6; e = e + index<2>(3,-4); _ASSERT(e == extent<2>(9, 9)); _ASSERT( e.contains(index<2>(8, 8))); _ASSERT(!e.contains(index<2>(8, 9))); grid<N> Our upcoming pre-release bits also have a similar type to extent, grid<N>. The way you create a grid is by passing it an extent, e.g. extent<3> e(4,2,6); grid<3> g(e); I am not going to dive deeper into grid, suffice for now to think of grid<N> simply as an alias for the extent<N> object, that you create when you encounter a function that expects a grid object instead of an extent object. Usage The extent class on its own simply defines the size of the N-dimensional space. We'll see in future posts that when you create containers (arrays) and wrappers (array_views) for your data, it is an extent<N> object that you'll need to use to create those (and use an index<N> object to index into them). We'll also see that it is a grid<N> object that you pass to the new parallel_for_each function that I'll cover in the next post. Comments about this post by Daniel Moth welcome at the original blog.

  Read the article

• Not enough free disk space

  - by carmatt95

  I'm new to Ubuntu and I'm getting an error in software updater. When I try and do my daily updates, it says: The upgrade needs a total of 25.3 M free space on disk /boot. Please free at least an additional 25.3 M of disk space on /boot. Empty your trash and remove temporary packages of former installations using sudo apt-get clean. I tried typing in sudo apt-get clean into the terminal but I still get the message. All of the pages I read seem to be for experianced Ubuntuers. Any help would be appreciated. I'm running Ubuntu 12.10. I want to upgrade to 13.04 but understand I have to finish these first. EDIT: @Alaa, This is the output from typing in cat /etc/fstab into the terminal: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> /dev/mapper/ubuntu-root / ext4 errors=remount-ro 0 1 # /boot was on /dev/sda1 during installation UUID=fa55c082-112d-4b10-bcf3-e7ffec6cebbc /boot ext2 defaults 0 2 /dev/mapper/ubuntu-swap_1 none swap sw 0 0 /dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0 matty@matty-G41M-ES2L:~$ df -h: Filesystem Size Used Avail Use% Mounted on /dev/mapper/ubuntu-root 915G 27G 842G 4% / udev 984M 4.0K 984M 1% /dev tmpfs 397M 1.1M 396M 1% /run none 5.0M 0 5.0M 0% /run/lock none 992M 1.8M 990M 1% /run/shm none 100M 52K 100M 1% /run/user /dev/sda1 228M 222M 0 100% /boot matty@matty-G41M-ES2L:~$ dpkg -l | grep linux-image: ii linux-image-3.5.0-17-generic 3.5.0-17.28 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP ii linux-image-3.5.0-18-generic 3.5.0-18.29 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP ii linux-image-3.5.0-19-generic 3.5.0-19.30 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP ii linux-image-3.5.0-21-generic 3.5.0-21.32 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP ii linux-image-3.5.0-22-generic 3.5.0-22.34 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP ii linux-image-3.5.0-23-generic 3.5.0-23.35 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP ii linux-image-3.5.0-24-generic 3.5.0-24.37 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP ii linux-image-3.5.0-25-generic 3.5.0-25.39 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP ii linux-image-3.5.0-26-generic 3.5.0-26.42 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP iF linux-image-3.5.0-28-generic 3.5.0-28.48 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP

  Read the article

• ReSharper 8.0 EAP now available

  - by TATWORTH

  Originally posted on: http://geekswithblogs.net/TATWORTH/archive/2013/06/28/resharper-8.0-eap-now-available.aspxJetbrains have just released |ReSharper 8.0 Beta on their Early Access |Programme at http://www.jetbrains.com/resharper/whatsnew/?utm_source=resharper8b&utm_medium=newsletter&utm_campaign=resharper&utm_content=customersResharper 8.0 comes with the following new features:Support for Visual Studio 2013 Preview. Yes, ReSharper is known to work well with the fresh preview of Visual Studio 2013, and if you have already started digging into it, ReSharper 8.0 Beta is ready for the challenge.Faster code fixes. Thanks to the new Fix in Scope feature, you can choose to batch-fix some of the code issues that ReSharper detects in the scope of a project or the whole solution. Supported fixes include removing unused directives and redundant casts.Project dependency viewer. ReSharper is now able to visualize a project dependency graph for a bird's eye view of dependencies within your solution, all without compiling anything!Multifile templates. ReSharper's file templates can now be expanded to generate more than one file. For instance, this is handy for generating pairs of a main logic class and a class for extensions, or sets of partial files.Navigation improvements. These include a new action called Go to Everything to let you search for a file, type or method name from the same input box; support for line numbers in navigation actions; a new tool window called Assembly Explorer for browsing through assemblies; and two more contextual navigation actions: Navigate to Generic Substitutions and Navigate to Assembly Explorer.New solution-wide refactorings. The set of fresh refactorings is headlined by the highly requested Move Instance Method to move methods between classes without making them static. In addition, there are Inline Parameter and Pull Parameter. Last but not least, we're also introducing 4 new XAML-specific refactorings!Extraordinary XAML support. A plethora of new and improved functionality for all developers working with XAML code includes dedicated grid inspections and quick-fixes; Extract Style, Extract, Move and Inline Resource refactorings; atomic renaming of dependency properties; and a lot more.More accessible code completion. ReSharper 8 makes more of its IntelliSense magic available in automatic completion lists, including extension methods and an option to import a type. We're also introducing double completion which gives you additional completion items when you press the corresponding shortcut for the second time.A new level of extensibility. With the new NuGet-based Extension Manager, discovering, installing and uninstalling ReSharper extensions becomes extremely easy in Visual Studio 2010 and higher. When we say extensions, we mean not only full-fledged plug-ins but also sets of templates or SSR patterns that can now be shared much more easily.CSS support improvements. Smarter usage search for CSS attributes, new CSS-specific code inspections, configurable support for CSS3 and earlier versions, compatibility checks against popular browsers - there's a rough outline of what's new for CSS in ReSharper 8.A command-line version of ReSharper. ReSharper 8 goes beyond Visual Studio: we now provide a free standalone tool with hundreds of ReSharper inspections and additionally a duplicate code finder that you can integrate with your CI server or version control system.Multiple minor improvements in areas such as decompiling and code formatting, as well as support for the Blue Theme introduced in Visual Studio 2012 Update 2.

  Read the article

• Ops Center 12c - Update - Provisioning Solaris on x86 Using a Card-Based NIC

  - by scottdickson

  Last week, I posted a blog describing how to use Ops Center to provision Solaris over the network via a NIC on a card rather than the built-in NIC.  Really, that was all about how to install Solaris on a SPARC system.  This week, we'll look at how to do the same thing for an x86-based server. Really, the overall process is exactly the same, at least for Solaris 11, with only minor updates. We will focus on Solaris 11 for this blog.  Once I verify that the same approach works for Solaris 10, I will provide another update. Booting Solaris 11 on x86 Just as before, in order to configure the server for network boot across a card-based NIC, it is necessary to declare the asset to associate the additional MACs with the server.  You likely will need to access the server console via the ILOM to figure out the MAC and to get a good idea of the network instance number.  The simplest way to find both of these is to start a network boot using the desired NIC and see where it appears in the list of network interfaces and what MAC is used when it tries to boot.  Go to the ILOM for the server.  Reset the server and start the console.  When the BIOS loads, select the boot menu, usually with Ctrl-P.  This will give you a menu of devices to boot from, including all of the NICs.  Select the NIC you want to boot from.  Its position in the list is a good indication of what network number Solaris will give the device. In this case, we want to boot from the 5th interface (GB_4, net4).  Pick it and start the boot processes.  When it starts to boot, you will see the MAC address for the interface Once you have the network instance and the MAC, go through the same process of declaring the asset as in the SPARC case.  This associates the additional network interface with the server.. Creating an OS Provisioning Plan The simplest way to do the boot via an alternate interface on an x86 system is to do a manual boot.  Update the OS provisioning profile as in the SPARC case to reflect the fact that we are booting from a different interface.  Update, in this case, the network boot device to be GB_4/net4, or the device corresponding to your network instance number.  Configure the profile to support manual network boot by checking the box for manual boot in the OS Provisioning profile. Booting the System Once you have created a profile and plan to support booting from the additional NIC, we are ready to install the server. Again, from the ILOM, reset the system and start the console.  When the BIOS loads, select boot from the Boot Menu as above.  Select the network interface from the list as before and start the boot process.  When the grub bootloader loads, the default boot image is the Solaris Text Installer.  On the grub menu, select Automated Installer and Ops Center takes over from there. Lessons The key lesson from all of this is that Ops Center is a valuable tool for provisioning servers whether they are connected via built-in network interfaces or via high-speed NICs on cards.  This is great news for modern datacenters using converged network infrastructures.  The process works for both SPARC and x86 Solaris installations.  And it's easy and repeatable.

  Read the article

• MySQL for Excel new features (1.2.0): Save and restore Edit sessions

  - by Javier Rivera

  Today we are going to talk about another new feature included in the latest MySQL for Excel release to date (1.2.0) which can be Installed directly from our MySQL Installer downloads page.Since the first release you were allowed to open a session to directly edit data from a MySQL table at Excel on a worksheet and see those changes reflected immediately on the database. You were also capable of opening multiple sessions to work with different tables at the same time (when they belong to the same schema). The problem was that if for any reason you were forced to close Excel or the Workbook you were working on, you had no way to save the state of those open sessions and to continue where you left off you needed to reopen them one by one. Well, that's no longer a problem since we are now introducing a new feature to save and restore active Edit sessions. All you need to do is in click the options button from the main MySQL for Excel panel:  And make sure the Edit Session Options (highlighted in yellow) are set correctly, specially that Restore saved Edit sessions is checked: Then just begin an Edit session like you would normally do, select the connection and schema on the main panel and then select table you want to edit data from and click over Edit MySQL Data. and just import the MySQL data into Excel:You can edit data like you always did with the previous version. To test the save and restore saved sessions functionality, first we need to save the workbook while at least one Edit session is opened and close the file.Then reopen the workbook. Depending on your version of Excel is where the next steps are going to differ:Excel 2013 extra step (first): In Excel 2013 you first need to open the workbook with saved edit sessions, then click the MySQL for Excel Icon on the the Data menu (notice how in this version, every time you open or create a new file the MySQL for Excel panel is closed in the new window). Please note that if you work on Excel 2013 with several workbooks with open edit sessions each at the same time, you'll need to repeat this step each time you open one of them: Following steps:  In Excel 2010 or previous, you just need to make sure the MySQL for Excel panel is already open at this point, if its not, please do the previous step specified above (Excel 2013 extra step). For Excel 2010 or older versions you will only need to do this previous step once.  When saved sessions are detected, you will be prompted what to do with those sessions, you can click Restore to continue working where you left off, click Discard to delete the saved sessions (All edit session information for this file will be deleted from your computer, so you will no longer be prompted the next time you open this same file) or click Nothing to continue without opening saved sessions (This will keep the saved edit sessions intact, to be prompted again about them the next time you open this workbook): And there you have it, now you will be able to save your Edit sessions, close your workbook or turn off your computer and you will still be able to reopen them in the future, to continue working right where you were. Today we talked about how you can save your active Edit sessions and restore them later, this is another feature included in the latest MySQL for Excel release (1.2.0). Please remember you can try this product and many others for free downloading the installer directly from our MySQL Installer downloads page.Happy editing !

  Read the article

• Fun tips with Analytics

  - by user12620172

  If you read this blog, I am assuming you are at least familiar with the Analytic functions in the ZFSSA. They are basically amazing, very powerful and deep. However, you may not be aware of some great, hidden functions inside the Analytic screen. Once you open a metric, the toolbar looks like this: Now, I’m not going over every tool, as we have done that before, and you can hover your mouse over them and they will tell you what they do. But…. Check this out. Open a metric (CPU Percent Utilization works fine), and click on the “Hour” button, which is the 2nd clock icon. That’s easy, you are now looking at the last hour of data. Now, hold down your ‘Shift’ key, and click it again. Now you are looking at 2 hours of data. Hold down Shift and click it again, and you are looking at 3 hours of data. Are you catching on yet? You can do this with not only the ‘Hour’ button, but also with the ‘Minute’, ‘Day’, ‘Week’, and the ‘Month’ buttons. Very cool. It also works with the ‘Show Minimum’ and ‘Show Maximum’ buttons, allowing you to go to the next iteration of either of those. One last button you can Shift-click is the handy ‘Drill’ button. This button usually drills down on one specific aspect of your metric. If you Shift-click it, it will display a “Rainbow Highlight” of the current metric. This works best if this metric has many ‘Range Average’ items in the left-hand window. Give it a shot. Also, one will sometimes click on a certain second of data in the graph, like this:  In this case, I clicked 4:57 and 21 seconds, and the 'Range Average' on the left went away, and was replaced by the time stamp. It seems at this point to some people that you are now stuck, and can not get back to an average for the whole chart. However, you can actually click on the actual time stamp of "4:57:21" right above the chart. Even though your mouse does not change into the typical browser finger that most links look like, you can click it, and it will change your range back to the full metric. Another trick you may like is to save a certain view or look of a group of graphs. Most of you know you can save a worksheet, but did you know you could Sync them, Pause them, and then Save it? This will save the paused state, allowing you to view it forever the way you see it now.  Heatmaps. Heatmaps are cool, and look like this:  Some metrics use them and some don't. If you have one, and wish to zoom it vertically, try this. Open a heatmap metric like my example above (I believe every metric that deals with latency will show as a heatmap). Select one or two of the ranges on the left. Click the "Change Outlier Elimination" button. Click it again and check out what it does.  Enjoy. Perhaps my next blog entry will be the best Analytic metrics to keep your eyes on, and how you can use the Alerts feature to watch them for you. Steve 

  Read the article

• Applying for internship

  - by Margus

  At the moment I'm thinking about applying for internship at Eesti Energia. I seem to be eligible, but before contacting them I need to learn how to compile an informative and complete CV and cover letter. I do not consider myself as shallow minded, but also I'm not sure how to convincingly justify the stand of interest and how internship will help me in my future career. Course of life Tallinna Tehnikagümnaasium 2003 - 2006 Tallinna Tehnikaülikool 2006 – 2009 Military service at Signal Batallion Tallinna Tehnikaülikool 2010 – ... I started my academic career as Computer and Systems Engineer, but as I excelled in programming classes, I changed my major to Software Engineer and taken my specialty in web applications and logic. Nowadays I mainly use Java, Mathematica and C# to solve problems. For 2 times, I have taken part in ACM International Collegiate Programming Contest, where my team won the nationals and did pretty well in Europe. Also as part of notable thing in my academic career, my team wrote the Kalah game AI, that won in University's main programming class AI tournament. My hobbies are mind games and occasional problem solving. Few years ago I also competed in International Checkers EM (requires being in top 3 in nationals) as part of cadet and junior age group - I did not come close to winning, but I exceeded about half of the players each time. In high school and gymnasium I took part and later was the captain of team, that passes regionals and made it to top 3 of nationals (and later won) in (blitz) russian checkers. That was impressive because, it was a team effort as we only had (depending on year) 2-3 strong players. Although I started programming exactly 9,5 years ago I have no work experience. Well actually thats not true, as I completed my army duty, I was hired for a year (days still counting) to be apart of communicational (emergency) infrastructure action group where I'm the teams IT specialist (it's more complicated). So I consider myself to be aware of: rough conditions, teamwork, high stress tolerance, being on time and what responsibility means. As negative things I can mention: I do not have drivers licence. Although only Estonian and English are noted as requirements, then Russian is most likely required as well and I barely understand some of it. Reasons why I want to apply there, are: I need to do at least 4-6 week traineeship and it's in the right field I have the requirements and tasks seem easy enough Company is well known and has fairly good reputation Family and friend think, that it would be acceptable place to work Myriad of options to do final thesis about open up Work place is located in the same city I live atm. At moment, I see myself having a hard time explain why I would prefer it or where I see myself in 10 years if I was offered a job there. Question I have some idea how Curriculum Vitæ should look like, or I can google for template, but I'm not sure how to write informative one. Last I did one, it looked like: picture + contact information + education. Vaguely I only remember, that cover letter should be custom tailored for each place you apply containing ...

  Read the article

• “Apparently, you signed a software services agreement without fully understanding it.”

  - by Dave Ballantyne

  I am not a lawyer. Let me say that again, I am not a lawyer. Todays Dilbert has prompted me to post about my recent experience with SqlServer licensing. I'm in the technical realm and rarely have much to do with purchasing and licensing.  I say “I need” , budget realities will state weather I actually get.  However, I do keep my ear to the ground and due to my community involvement, I know, or at least have an understanding of, some licensing restrictions. Due to a misunderstanding, Microsoft Licensing stated that we needed licenses for our standby servers.  I knew that that was not the case,  and a quick tweet confirmed this. So after composing an email stating exactly what the machines in question were used for ie Log shipped to and used in a disaster recover scenario only,  and posting several Technet articles to back this up, we saved 2 enterprise edition licences, a not inconsiderable cost. However during this discussion, I was made aware of another ‘legalese’ document that could completely override the referenced articles, and anything I knew, or thought i knew, about SqlServer licensing. Personally, I had no knowledge of this.  The “Purchase Use Rights” agreement would appear to be the volume licensing equivalent of the “End User License Agreement” , click throughs we all know and ignore.  Here is a direct quote from Microsoft licensing, when asked for clarification. “Thanks for your email. Just to give some background on the Product Use Rights (PUR), licenses acquired through volume licensing are bound by the most recent PUR at the time of license acquisition. The link for the current PUR and PUR archive is http://www.microsoft.com/licensing/about-licensing/product-licensing.aspx. Further to this, products acquired through boxed product or pre-installed on hardware (OEM) are bound by the End User License Agreement (EULA). The PUR will explain limitations, license requirements and rulings on areas like multiplexing, virtualization, processor licensing, etc. When an article will appear on a Microsoft site or blog describing the licensing of a product, it will be using the PUR as a base. Due to the writing style or language used by the person writing areas of the website or technical blogs, the PUR is what you should use as a rule and not any of the other media. The PUR is updated quarterly and will reference every product available at that time working on the latest version unless otherwise stated. The crux of this is that the PUR is written after extensive discussions between the different branches of Microsoft (legal, technical, etc) and the wording is then approved. This is not always the case for some pages explaining licensing as they are merely intended to advise and not subject to the intense scrutiny as the PUR.” So, exactly what does that mean ? My take :  This is a living document, “updated quarterly” , though presumably this could be done on a whim and a fancy.  It could state , you are only licensed if ,that during install you stand in a corner juggling and that photographic evidence is required. A plainly ridiculous demand but,  what else could it override or new requirements could it state that change your existing understanding of the product or your legal usage of it. As i say, im not a lawyer, but are you checking the PURA prior to purchase ?

  Read the article

• iOS 5 New Features vs Android

  - by kerry

  Browsing through the iOS 5 features list, I can’t help but notice a lot of it is catch up. Having owned both an iPhone and an Android for a considerable amount of time, I figured I would jot down my opinions. Notification Center – Completely ripped off from Android but looks good and is a much needed addition iMessage – This is very interesting as most people who would think it’s cool, probably really wouldn’t understand the significance.  Basically, Apple is adding an IM application to iOS.  Now iPhone / iPad users can sit around messaging each other how cool it is like Crackberry users circa 2003.  I guess the only real improvement over MMS is that you can easily setup groups, see when each other are typing, and don’t incur text messaging charges; at the expense of leaving your non-iOS buddies out (who wants to talk to those losers anyways?). Newstand – An app update and not an OS one (Apple typically doesn’t make distinctions).  It all seems like stuff my current Nook stuff will do.  Note: I did look to compare prices but it seems that information is not available without downloading iTunes.  lame. Reminders – TODO lists are ho hum, but the ability to have reminders when you arrive or leave a position is pretty cool. Twitter integration – The fact that the best Apple can come up with is ‘one at a timing’ online service integration is laughable at best. Camera – Can control it from the lock screen.  Now you’ll have tons of pocket lint photos in your iCloud to go along with the wicked shot of that cheetah that just unexpectedly ran by your apartment. Photos – Speaking of iCloud, all of your devices photos will be synced through it.  That’s cool I guess, not sure if Android will do the same. Safari – What?  You haven’t been reading rss feeds on your device this whole time?  Something tells me you aren’t about to start. PC Free – Finely Apple untethers the iPhone.  What took them so long? Game Center – This should be an interesting service.  Attention Apple fanboys immediately forget how they are blatantly copying Microsoft achievements (at least rename them). Wifi Sync – Just couldn’t cut the cord completely could they?  For what it’s worth, the Zune has been doing this for 5 years now. All in all a pretty big update.  Mostly iCloud.  Mostly keeping up the mobile status quo.  As an Android user, I can’t say there is anything I am envious of.

  Read the article

• Customer Loyalty vs. Customer Engagement: Who Cares?

  - by Jeb Dasteel-Oracle

  Have you read the recent Forbes OracleVoice blog titled Customer Loyalty is Dead. Long Live Engagement!? If you haven’t, take a look. This article prompted lots of conversation in the social realm. Many who read the article voiced their reactions to the headline and now I’m jumping in to add my view. Normal 0 false false false EN-US X-NONE X-NONE Customer loyalty is still key. It’s the effect and engagement is the cause. We at least know that to be true for our customers. We are in an age where customers are demanding to be heard. We need them to be actively involved – or engaged – as well. Greater levels of customer engagement, properly targeted, positively correlate with satisfaction. Our data has shown us this over and over. Satisfied customers are more loyal and more willing to vocalize their satisfaction through referencing, and are more likely to purchase again, all of which in turn drives incremental revenue – from the customer doing the referencing AND the customer on the receiving end of that reference. Turning this around completely, if we begin to see the level of a customer’s engagement start to wane, this is an indicator that their satisfaction, loyalty, and future revenue are likely at risk. At Oracle, we’ve put in place many programs to target, encourage, and then track engagement, allowing us to measure engagement as a determinant of loyalty. Some of these programs include our Key Accounts, solution design and architectural, Executive Sponsorship, as well as executive advisory boards. Specific programs allow us to engage specific contacts within specific customer organizations (based on role) and then systematically track their engagement activities over time, along side of tracking customer satisfaction, loyalty, referenceability, and incremental revenue contribution. Continuous measurement of engagement allows us to better understand customer views of what it means to partner with a provider and adjust program participation to better meet the needs of the partnership. We can also track across customer segments, and design new programs that are even more effective than the ones we have in place today. In case you missed any of my previous Forbes articles, I’ve included links below for easy access. Award-Winning Companies Put Customers First The Power of Peer Networks: 5 Reasons to Get (and Stay) Involved Technology At Work: Traveling In Style Customer Central: 8 Strategies for Putting Customers at the Core of Your Business Technology at Work: Five Companies Doing IT Right /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

• Data breakpoints to find points where data gets broken

  - by raccoon_tim

  When working with a large code base, finding reasons for bizarre bugs can often be like finding a needle in a hay stack. Finding out why an object gets corrupted without no apparent reason can be quite daunting, especially when it seems to happen randomly and totally out of context. Scenario Take the following scenario as an example. You have defined the a class that contains an array of characters that is 256 characters long. You now implement a method for filling this buffer with a string passed as an argument. At this point you mistakenly expect the buffer to be 256 characters long. At some point you notice that you require another character buffer and you add that after the previous one in the class definition. You now figure that you don’t need the 256 characters that the first member can hold and you shorten that to 128 to conserve space. At this point you should start thinking that you also have to modify the method defined above to safeguard against buffer overflow. It so happens, however, that in this not so perfect world this does not cross your mind. Buffer overflow is one of the most frequent sources for errors in a piece of software and often one of the most difficult ones to detect, especially when data is read from an outside source. Many mass copy functions provided by the C run-time provide versions that have boundary checking (defined with the _s suffix) but they can not guard against hard coded buffer lengths that at some point get changed. Finding the bug Getting back to the scenario, you’re now wondering why does the second string get modified with data that makes no sense at all. Luckily, Visual Studio provides you with a tool to help you with finding just these kinds of errors. It’s called data breakpoints. To add a data breakpoint, you first run your application in debug mode or attach to it in the usual way, and then go to Debug, select New Breakpoint and New Data Breakpoint. In the popup that opens, you can type in the memory address and the amount of bytes you wish to monitor. You can also use an expression here, but it’s often difficult to come up with an expression for data in an object allocated on the heap when not in the context of a certain stack frame. There are a couple of things to note about data breakpoints, however. First of all, Visual Studio supports a maximum of four data breakpoints at any given time. Another important thing to notice is that some C run-time functions modify memory in kernel space which does not trigger the data breakpoint. For instance, calling ReadFile on a buffer that is monitored by a data breakpoint will not trigger the breakpoint. The application will now break at the address you specified it to. Often you might immediately spot the issue but the very least this feature can do is point you in the right direction in search for the real reason why the memory gets inadvertently modified. Conclusions Data breakpoints are a great feature, especially when doing a lot of low level operations where multiple locations modify the same data. With the exception of some special cases, like kernel memory modification, you can use it whenever you need to check when memory at a certain location gets changed on purpose or inadvertently.

  Read the article

• PCI Encryption Key Management

  - by Unicorn Bob

  (Full disclosure: I'm already an active participant here and at StackOverflow, but for reasons that should hopefully be obvious, I'm choosing to ask this particular question anonymously). I currently work for a small software shop that produces software that's sold commercially to manage small- to mid-size business in a couple of fairly specialized industries. Because these industries are customer-facing, a large portion of the software is related to storing and managing customer information. In particular, the storage (and securing) of customer credit card information. With that, of course, comes PCI compliance. To make a long story short, I'm left with a couple of questions about why certain things were done the way they were, and I'm unfortunately without much of a resource at the moment. This is a very small shop (I report directly to the owner, as does the only other full-time employee), and the owner doesn't have an answer to these questions, and the previous developer is...err...unavailable. Issue 1: Periodic Re-encryption As of now, the software prompts the user to do a wholesale re-encryption of all of the sensitive information in the database (basically credit card numbers and user passwords) if either of these conditions is true: There are any NON-encrypted pieces of sensitive information in the database (added through a manual database statement instead of through the business object, for example). This should not happen during the ordinary use of the software. The current key has been in use for more than a particular period of time. I believe it's 12 months, but I'm not certain of that. The point here is that the key "expires". This is my first foray into commercial solution development that deals with PCI, so I am unfortunately uneducated on the practices involved. Is there some aspect of PCI compliance that mandates (or even just strongly recommends) periodic key updating? This isn't a huge issue for me other than I don't currently have a good explanation to give to end users if they ask why they are being prompted to run it. Question 1: Is the concept of key expiration standard, and, if so, is that simply industry-standard or an element of PCI? Issue 2: Key Storage Here's my real issue...the encryption key is stored in the database, just obfuscated. The key is padded on the left and right with a few garbage bytes and some bits are twiddled, but fundamentally there's nothing stopping an enterprising person from examining our (dotfuscated) code, determining the pattern used to turn the stored key into the real key, then using that key to run amok. This seems like a horrible practice to me, but I want to make sure that this isn't just one of those "grin and bear it" practices that people in this industry have taken to. I have developed an alternative approach that would prevent such an attack, but I'm just looking for a sanity check here. Question 2: Is this method of key storage--namely storing the key in the database using an obfuscation method that exists in client code--normal or crazy? Believe me, I know that free advice is worth every penny that I've paid for it, nobody here is an attorney (or at least isn't offering legal advice), caveat emptor, etc. etc., but I'm looking for any input that you all can provide. Thank you in advance!

  Read the article

• Thinking Local, Regional and Global

  - by Apeksha Singh-Oracle

  The FIFA World Cup tournament is the biggest single-sport competition: it’s watched by about 1 billion people around the world. Every four years each national team’s manager is challenged to pull together a group players who ply their trade across the globe. For example, of the 23 members of Brazil’s national team, only four actually play for Brazilian teams, and the rest play in England, France, Germany, Spain, Italy and Ukraine. Each country’s national league, each team and each coach has a unique style. Getting all these “localized” players to work together successfully as one unit is no easy feat. In addition to $35 million in prize money, much is at stake – not least national pride and global bragging rights until the next World Cup in four years time. Achieving economic integration in the ASEAN region by 2015 is a bit like trying to create the next World Cup champion by 2018. The team comprises Brunei Darussalam, Cambodia, Indonesia, Lao PDR, Malaysia, Myanmar, Philippines, Singapore, Thailand and Vietnam. All have different languages, currencies, cultures and customs, rules and regulations. But if they can pull together as one unit, the opportunity is not only great for business and the economy, but it’s also a source of regional pride. BCG expects by 2020 the number of firms headquartered in Asia with revenue exceeding $1 billion will double to more than 5,000. Their trade in the region and with the world is forecast to increase to 37% of an estimated $37 trillion of global commerce by 2020 from 30% in 2010. Banks offering transactional banking services to the emerging market place need to prepare to repond to customer needs across the spectrum – MSMEs, SMEs, corporates and multi national corporations. Customers want innovative, differentiated, value added products and services that provide: • Pan regional operational independence while enabling single source of truth at a regional level • Regional connectivity and Cash & Liquidity  optimization • Enabling Consistent experience for their customers  by offering standardized products & services across all ASEAN countries • Multi-channel & self service capabilities / access to real-time information on liquidity and cash flows • Convergence of cash management with supply chain and trade finance While enabling the above to meet customer demands, the need for a comprehensive and robust credit management solution for effective regional banking operations is a must to manage risk. According to BCG, Asia-Pacific wholesale transaction-banking revenues are expected to triple to $139 billion by 2022 from $46 billion in 2012. To take advantage of the trend, banks will have to manage and maximize their own growth opportunities, compete on a broader scale, manage the complexity within the region and increase efficiency. They’ll also have to choose the right operating model and regional IT platform to offer: • Account Services • Cash & Liquidity Management • Trade Services & Supply Chain Financing • Payments • Securities services • Credit and Lending • Treasury services The core platform should be able to balance global needs and local nuances. Certain functions need to be performed at a regional level, while others need to be performed on a country level. Financial reporting and regulatory compliance are a case in point. The ASEAN Economic Community is in the final lap of its preparations for the ultimate challenge: becoming a formidable team in the global league. Meanwhile, transaction banks are designing their own hat trick: implementing a world-class IT platform, positioning themselves to repond to customer needs and establishing a foundation for revenue generation for years to come. Anand Ramachandran Senior Director, Global Banking Solutions Practice Oracle Financial Services Global Business Unit

  Read the article

• Migrating VB6 to HTML5 is not a fiction - Customer success story

  - by Webgui

  All of you VB developers in the present or past would probably find it hard to believe that the old VB code can be migrated and modernized into the latest .NET based HTML5 without having to rewrite the application. But we have been working on such tools for the past couple of years and already have several real world applications that were fully 'transposed' from VB6. The solution is called Instant CloudMove and its main tool is called the TranspositionStudio. It is a unique solution that relies on the concept of transposition. Transposition comes from mathematics and music and refers to exchanging elements while everything else remains the same or moving an element as is from one environment to another. This means that we are taking the source code and put it in a modern technological environment with relatively few adjustments.The concept is based on a set of Mapping Expressions which are basically links between an element in the source environment and one in the target environment that has the same functionality. About 95% of the code is usually mapped out-of-the-box and the rest is handled with easy-to-use mapping tools designed for Visual Studio developers providing them with a familiar environment and concepts for completing the mapping and allowing them to extend and customize existing mapping expressions. The solution is also based on a circular workflow that enables developers to make any changes as required until the result is satisfying.As opposed to existing migration solutions that offer automation are usually a “black box” to the user, the transposition concept enables full visibility, flexibility and control over the code and process at all times allowing to also add/change functionalities or upgrade the UI within the process and tools.This is exactly the case with our customer’s aging VB6 PMS (Property Management System) which needed a technological update as well as a design refresh. The decision was to move the VB6 application which had about 1 million lines of code into the latest web technology. Since the application was initially written 13 years ago and had many upgrades since the code must be very patchy and includes unused sections. As a result, the company Mihshuv Group considered rewriting the entire application in Java since it already had the knowledge. Rewrite would allow starting with a clean slate and designing functionality, database architecture, UI without any constraints. On the other hand, rewrite entitles a long and detailed specification work as well as a thorough QA and this translates into a long project with high risk and costs.So the company looked for a migration solution as an alternative; the research lead to Gizmox and after examining the technology it was decided to perform a hybrid project which would include an automatic transposition of the core of the VB6 application (200,000 lines of code) while they redesigning the UI, adding new functionality, deleting unused code and rewriting about 140 reports with Crystal Reports will be done manually using Visual WebGui development tools.The migration part of the project was completed in 65 days by 3 developers from Mihshuv Group guided by Gizmox migration experts while the rewrite and UI upgrade tasks took about the same. So in only a few months period Mihshuv Group generated an up-to-date product, written in the latest Web technology with modern, friendly UI and improved functionality. Guest selection screen of the original VB6 PMS Guest selection screen on the new web–based PMS Compared to the initial plan to rewrite the entire application in Java, the hybrid migration/rewrite approach taken by Mihshuv Group using Gizmox technology proved as a great decision. In terms of time and cost there were substantial savings; from a project that was priced for at least a year (without taking into account the huge risk and uncertainty) it became a few months project only. More about this and other customer stories can be found here

  Read the article

• Modernizr Rocks HTML5

  - by Laila

  HTML5 is a moving target.  At the moment, we don't know what will be in future versions.  In most circumstances, this really matters to the developer. When you're using Adobe Air, you can be reasonably sure what works, what is there, and what isn't, since you have a version of the browser built-in. With Metro, you can assume that you're going to be using at least IE 10.   If, however,  you are using HTML5 in a web application, then you are going to rely heavily on Feature Detection.  Feature-Detection is a collection of techniques that tell you, via JavaScript, whether the current browser has this feature natively implemented or not Feature Detection isn't just there for the esoteric stuff such as  Geo-location,  progress bars,  <canvas> support,  the new <input> types, Audio, Video, web workers or storage, but is required even for semantic markup, since old browsers make a pigs ear out of rendering this.  Feature detection can't rely just on reading the browser version and inferring from that what works. Instead, you must use JavaScript to check that an HTML5 feature is there before using it.  The problem with relying on the user-agent is that it takes a lot of historical data  to work out what version does what, and, anyway, the user-agent can be, and sometimes is, spoofed. The open-source library Modernizr  is just about the most essential  JavaScript library for anyone using HTML5, because it provides APIs to test for most of the CSS3 and HTML5 features before you use them, and is intelligent enough to alter semantic markup into 'legacy' 'markup  using shims  on page-load  for old browsers. It also allows you to check what video Codecs are installed for playing video. It also provides media queries  and conditional resource-loading (formerly YepNope.js.).  Generally, Modernizr gives you the choice of what you do about browsers that don't support the feature that you want. Often, the best choice is graceful degradation, but the resource-loading feature allows you to dynamically load JavaScript Shims to replace the standard API for missing or defective HTML5 functionality, called 'PolyFills'.  As the Modernizr site says 'Yes, not only can you use HTML5 today, but you can use it in the past, too!' The evolutionary progress of HTML5  requires a more defensive style of JavaScript programming where the programmer adopts a mindset of fearing the worst ( IE 6)  rather than assuming the best, whilst exploiting as many of the new HTML features as possible for the requirements of the site or HTML application.  Why would anyone want the distraction of developing their own techniques to do this when  Modernizr exists to do this for you? Laila

  Read the article

• Is Visual Source Safe (The latest Version) really that bad? Why? What's the Best Alternative? Why? [closed]

  - by hanzolo

  Over the years I've constantly heard horror stories, had people say "Real Programmers Dont Use VSS", and so on. BUT, then in the workplace I've worked at two companies, one, a very well known public facing high traffic website, and another high end Financial Services "Web-Based" hosted solution catering to some very large, very well known companies, which is where I currently Reside and everything's working just fine (KNOCK KNOCK!!). I'm constantly interfacing with EXTREMELY Old technology with some of these financial institutions.. OLD LIKE YOU WOULDN'T BELIEVE.. which leads me to the conclusion that if it works "LEAVE IT", and that maybe there's some value in old technology? at least enough value to overrule a rewrite!? right?? Is there something fundamentally flawed with the underlying technology that VSS uses? I have a feeling that if i said "someone said VSS Sucks" they would beg to differ, most likely give me this look like i dont know -ish, and I'd never gain back their respect and my credibility (well, that'll be hard to blow.. lol), BUT, give me an argument that I can take to someone whose been coding for 30 years, that builds Platforms that leverage current technology (.NET 3.5 / SQL 2008 R2 ), write's their own ORM with scaffolding and is able to provide a quality platform that supports thousands of concurrent users on a multi-tenant hosted solution, and does not agree with any benefits from having Source Control Integrated, and yet uses the Infamous Visual Source Safe. I have extensive experience with TFS up to 2010, and honestly I think it's great when a team (beyond developers) can embrace it. I've worked side by side with someone whose a die hard SVN'r and from a purist standpoint, I see the beauty in it (I need a bit more, out of my SS, but it surely suffices). So, why are such smarties not running away from Visual Source Safe? surely if it was so bad, it would've have been realized by now, and I would not be sitting here with this simple old, Check In, Check Out, Version Resistant, Label Intensive system. But here I am... I would love to drop an argument that would be the end all argument, but if it's a matter of opinion and personal experience, there seems to be too much leeway for keeping VSS. UPDATE: I guess the best case is to have the VSS supporters check other people's experiences and draw from that until we (please no) experience the breaking factor ourselves. Until then, i wont be engaging in a discussion to migrate off of VSS.. UPDATE 11-2012: So i was able to convince everyone at my work place that since MS is sun downing Visual Source Safe it might be time to migrate over to TFS. I was able to convince them and have recently upgraded our team to Visual Studio 2012 and TFS 2012. The migration was fairly painless, had to run analyze.exe which found a bunch of errors (not sure they'll ever affect the project) and then manually run the VSSConverter.exe. Again, painless, except it took 16 hours to migrate 5 years worth of everything.. and now we're on TFS.. much more integrated.. much more cooler.. so all in all, VSS served it's purpose for years without hick-up. There were no horror stories and Visual Source Save as source control worked just fine. so to all the nay sayers (me included). there's nothing wrong with using VSS. i wouldnt start a new project with it, and i would definitely consider migrating to TFS. (it's really not super difficult and a new "wizard" type converter is due out any day now so migrating should be painless). But from my experience, it worked just fine and got the job done.

  Read the article

< Previous Page | 322 323 324 325 326 327 328 329 330 331 332 333  | Next Page >