Search Results

Search found 9706 results on 389 pages for 'boot ini'.

Page 327/389 | < Previous Page | 323 324 325 326 327 328 329 330 331 332 333 334  | Next Page >

  • Recover Data Like a Forensics Expert Using an Ubuntu Live CD

    - by Trevor Bekolay
    There are lots of utilities to recover deleted files, but what if you can’t boot up your computer, or the whole drive has been formatted? We’ll show you some tools that will dig deep and recover the most elusive deleted files, or even whole hard drive partitions. We’ve shown you simple ways to recover accidentally deleted files, even a simple method that can be done from an Ubuntu Live CD, but for hard disks that have been heavily corrupted, those methods aren’t going to cut it. In this article, we’ll examine four tools that can recover data from the most messed up hard drives, regardless of whether they were formatted for a Windows, Linux, or Mac computer, or even if the partition table is wiped out entirely. Note: These tools cannot recover data that has been overwritten on a hard disk. Whether a deleted file has been overwritten depends on many factors – the quicker you realize that you want to recover a file, the more likely you will be able to do so. Our setup To show these tools, we’ve set up a small 1 GB hard drive, with half of the space partitioned as ext2, a file system used in Linux, and half the space partitioned as FAT32, a file system used in older Windows systems. We stored ten random pictures on each hard drive. We then wiped the partition table from the hard drive by deleting the partitions in GParted. Is our data lost forever? Installing the tools All of the tools we’re going to use are in Ubuntu’s universe repository. To enable the repository, open Synaptic Package Manager by clicking on System in the top-left, then Administration > Synaptic Package Manager. Click on Settings > Repositories and add a check in the box labelled “Community-maintained Open Source software (universe)”. Click Close, and then in the main Synaptic Package Manager window, click the Reload button. Once the package list has reloaded, and the search index rebuilt, search for and mark for installation one or all of the following packages: testdisk, foremost, and scalpel. Testdisk includes TestDisk, which can recover lost partitions and repair boot sectors, and PhotoRec, which can recover many different types of files from tons of different file systems. Foremost, originally developed by the US Air Force Office of Special Investigations, recovers files based on their headers and other internal structures. Foremost operates on hard drives or drive image files generated by various tools. Finally, scalpel performs the same functions as foremost, but is focused on enhanced performance and lower memory usage. Scalpel may run better if you have an older machine with less RAM. Recover hard drive partitions If you can’t mount your hard drive, then its partition table might be corrupted. Before you start trying to recover your important files, it may be possible to recover one or more partitions on your drive, recovering all of your files with one step. Testdisk is the tool for the job. Start it by opening a terminal (Applications > Accessories > Terminal) and typing in: sudo testdisk If you’d like, you can create a log file, though it won’t affect how much data you recover. Once you make your choice, you’re greeted with a list of the storage media on your machine. You should be able to identify the hard drive you want to recover partitions from by its size and label. TestDisk asks you select the type of partition table to search for. In most cases (ext2/3, NTFS, FAT32, etc.) you should select Intel and press Enter. Highlight Analyse and press enter. In our case, our small hard drive has previously been formatted as NTFS. Amazingly, TestDisk finds this partition, though it is unable to recover it. It also finds the two partitions we just deleted. We are able to change their attributes, or add more partitions, but we’ll just recover them by pressing Enter. If TestDisk hasn’t found all of your partitions, you can try doing a deeper search by selecting that option with the left and right arrow keys. We only had these two partitions, so we’ll recover them by selecting Write and pressing Enter. Testdisk informs us that we will have to reboot. Note: If your Ubuntu Live CD is not persistent, then when you reboot you will have to reinstall any tools that you installed earlier. After restarting, both of our partitions are back to their original states, pictures and all. Recover files of certain types For the following examples, we deleted the 10 pictures from both partitions and then reformatted them. PhotoRec Of the three tools we’ll show, PhotoRec is the most user-friendly, despite being a console-based utility. To start recovering files, open a terminal (Applications > Accessories > Terminal) and type in: sudo photorec To begin, you are asked to select a storage device to search. You should be able to identify the right device by its size and label. Select the right device, and then hit Enter. PhotoRec asks you select the type of partition to search. In most cases (ext2/3, NTFS, FAT, etc.) you should select Intel and press Enter. You are given a list of the partitions on your selected hard drive. If you want to recover all of the files on a partition, then select Search and hit enter. However, this process can be very slow, and in our case we only want to search for pictures files, so instead we use the right arrow key to select File Opt and press Enter. PhotoRec can recover many different types of files, and deselecting each one would take a long time. Instead, we press “s” to clear all of the selections, and then find the appropriate file types – jpg, gif, and png – and select them by pressing the right arrow key. Once we’ve selected these three, we press “b” to save these selections. Press enter to return to the list of hard drive partitions. We want to search both of our partitions, so we highlight “No partition” and “Search” and then press Enter. PhotoRec prompts for a location to store the recovered files. If you have a different healthy hard drive, then we recommend storing the recovered files there. Since we’re not recovering very much, we’ll store it on the Ubuntu Live CD’s desktop. Note: Do not recover files to the hard drive you’re recovering from. PhotoRec is able to recover the 20 pictures from the partitions on our hard drive! A quick look in the recup_dir.1 directory that it creates confirms that PhotoRec has recovered all of our pictures, save for the file names. Foremost Foremost is a command-line program with no interactive interface like PhotoRec, but offers a number of command-line options to get as much data out of your had drive as possible. For a full list of options that can be tweaked via the command line, open up a terminal (Applications > Accessories > Terminal) and type in: foremost –h In our case, the command line options that we are going to use are: -t, a comma-separated list of types of files to search for. In our case, this is “jpeg,png,gif”. -v, enabling verbose-mode, giving us more information about what foremost is doing. -o, the output folder to store recovered files in. In our case, we created a directory called “foremost” on the desktop. -i, the input that will be searched for files. This can be a disk image in several different formats; however, we will use a hard disk, /dev/sda. Our foremost invocation is: sudo foremost –t jpeg,png,gif –o foremost –v –i /dev/sda Your invocation will differ depending on what you’re searching for and where you’re searching for it. Foremost is able to recover 17 of the 20 files stored on the hard drive. Looking at the files, we can confirm that these files were recovered relatively well, though we can see some errors in the thumbnail for 00622449.jpg. Part of this may be due to the ext2 filesystem. Foremost recommends using the –d command-line option for Linux file systems like ext2. We’ll run foremost again, adding the –d command-line option to our foremost invocation: sudo foremost –t jpeg,png,gif –d –o foremost –v –i /dev/sda This time, foremost is able to recover all 20 images! A final look at the pictures reveals that the pictures were recovered with no problems. Scalpel Scalpel is another powerful program that, like Foremost, is heavily configurable. Unlike Foremost, Scalpel requires you to edit a configuration file before attempting any data recovery. Any text editor will do, but we’ll use gedit to change the configuration file. In a terminal window (Applications > Accessories > Terminal), type in: sudo gedit /etc/scalpel/scalpel.conf scalpel.conf contains information about a number of different file types. Scroll through this file and uncomment lines that start with a file type that you want to recover (i.e. remove the “#” character at the start of those lines). Save the file and close it. Return to the terminal window. Scalpel also has a ton of command-line options that can help you search quickly and effectively; however, we’ll just define the input device (/dev/sda) and the output folder (a folder called “scalpel” that we created on the desktop). Our invocation is: sudo scalpel /dev/sda –o scalpel Scalpel is able to recover 18 of our 20 files. A quick look at the files scalpel recovered reveals that most of our files were recovered successfully, though there were some problems (e.g. 00000012.jpg). Conclusion In our quick toy example, TestDisk was able to recover two deleted partitions, and PhotoRec and Foremost were able to recover all 20 deleted images. Scalpel recovered most of the files, but it’s very likely that playing with the command-line options for scalpel would have enabled us to recover all 20 images. These tools are lifesavers when something goes wrong with your hard drive. If your data is on the hard drive somewhere, then one of these tools will track it down! Similar Articles Productive Geek Tips Recover Deleted Files on an NTFS Hard Drive from a Ubuntu Live CDUse an Ubuntu Live CD to Securely Wipe Your PC’s Hard DriveReset Your Ubuntu Password Easily from the Live CDBackup Your Windows Live Writer SettingsAdding extra Repositories on Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Awe inspiring, inter-galactic theme (Win 7) Case Study – How to Optimize Popular Wordpress Sites Restore Hidden Updates in Windows 7 & Vista Iceland an Insurance Job? Find Downloads and Add-ins for Outlook Recycle !

    Read the article

  • Node remains in commissioning status

    - by Vinitha
    I have been trying to set up ubuntu cloud 12.04. I'm kind of new to MAAS and ubuntu. Here is what I followed. Have installed MAAS server using the steps provided in https://wiki.ubuntu.com/ServerTeam/MAAS For the node, I installed the Ubuntu 12.04 Server Image on a USB Stick. Then restarted the node and opted to enlist the node via boot media, with PXE. once the process was done, the node was powered off as expected. I manually powered on the node, as my node is not PXE enabled. Result - No node was visible on MAAS UI Since step 2 didn't work, I added the node via maas-cli. command. After the execution of this command I got the node reflected on to my MAAS UI. But the status continues to be in "Commissioning" for a long time. Then I executed "maas-cli maas nodes check-commissioning " and i got "Unrecognised signature: POST check_commissioning". I'm not sure where is the error. Could some one please help me solve this issue. I checked the following log file but found no error related to commissioning (pserv.log / maas.log / celery.log/celery-region.log). I found this entry in my auth.log "Nov 16 18:20:34 ubuntuCloud sshd[4222]: Did not receive identification string from xxx.xx.xx.x" not sure if it indicates anything as the ip that is mentioned is not of the node nor of the MAAS server. I also verified the time on the server and node using date cmd - (at one instance the times are : Server: Fri Nov 16 18:15:51 IST 2012 and Node Fri Nov 16 18:15:43 IST 2012). Not sure if 'date' the right cmd to set the time. I have also check maas_local_settings.py for the MAAS url. I'm not sure what are the logs that need to be verified. Is there any log that can be checked on the Node. Thanks Vinitha

    Read the article

  • Move Files from a Failing PC with an Ubuntu Live CD

    - by Trevor Bekolay
    You’ve loaded the Ubuntu Live CD to salvage files from a failing system, but where do you store the recovered files? We’ll show you how to store them on external drives, drives on the same PC, a Windows home network, and other locations. We’ve shown you how to recover data like a forensics expert, but you can’t store recovered files back on your failed hard drive! There are lots of ways to transfer the files you access from an Ubuntu Live CD to a place that a stable Windows machine can access them. We’ll go through several methods, starting each section from the Ubuntu desktop – if you don’t yet have an Ubuntu Live CD, follow our guide to creating a bootable USB flash drive, and then our instructions for booting into Ubuntu. If your BIOS doesn’t let you boot using a USB flash drive, don’t worry, we’ve got you covered! Use a Healthy Hard Drive If your computer has more than one hard drive, or your hard drive is healthy and you’re in Ubuntu for non-recovery reasons, then accessing your hard drive is easy as pie, even if the hard drive is formatted for Windows. To access a hard drive, it must first be mounted. To mount a healthy hard drive, you just have to select it from the Places menu at the top-left of the screen. You will have to identify your hard drive by its size. Clicking on the appropriate hard drive mounts it, and opens it in a file browser. You can now move files to this hard drive by drag-and-drop or copy-and-paste, both of which are done the same way they’re done in Windows. Once a hard drive, or other external storage device, is mounted, it will show up in the /media directory. To see a list of currently mounted storage devices, navigate to /media by clicking on File System in a File Browser window, and then double-clicking on the media folder. Right now, our media folder contains links to the hard drive, which Ubuntu has assigned a terribly uninformative label, and the PLoP Boot Manager CD that is currently in the CD-ROM drive. Connect a USB Hard Drive or Flash Drive An external USB hard drive gives you the advantage of portability, and is still large enough to store an entire hard disk dump, if need be. Flash drives are also very quick and easy to connect, though they are limited in how much they can store. When you plug a USB hard drive or flash drive in, Ubuntu should automatically detect it and mount it. It may even open it in a File Browser automatically. Since it’s been mounted, you will also see it show up on the desktop, and in the /media folder. Once it’s been mounted, you can access it and store files on it like you would any other folder in Ubuntu. If, for whatever reason, it doesn’t mount automatically, click on Places in the top-left of your screen and select your USB device. If it does not show up in the Places list, then you may need to format your USB drive. To properly remove the USB drive when you’re done moving files, right click on the desktop icon or the folder in /media and select Safely Remove Drive. If you’re not given that option, then Eject or Unmount will effectively do the same thing. Connect to a Windows PC on your Local Network If you have another PC or a laptop connected through the same router (wired or wireless) then you can transfer files over the network relatively quickly. To do this, we will share one or more folders from the machine booted up with the Ubuntu Live CD over the network, letting our Windows PC grab the files contained in that folder. As an example, we’re going to share a folder on the desktop called ToShare. Right-click on the folder you want to share, and click Sharing Options. A Folder Sharing window will pop up. Check the box labeled Share this folder. A window will pop up about the sharing service. Click the Install service button. Some files will be downloaded, and then installed. When they’re done installing, you’ll be appropriately notified. You will be prompted to restart your session. Don’t worry, this won’t actually log you out, so go ahead and press the Restart session button. The Folder Sharing window returns, with Share this folder now checked. Edit the Share name if you’d like, and add checkmarks in the two checkboxes below the text fields. Click Create Share. Nautilus will ask your permission to add some permissions to the folder you want to share. Allow it to Add the permissions automatically. The folder is now shared, as evidenced by the new arrows above the folder’s icon. At this point, you are done with the Ubuntu machine. Head to your Windows PC, and open up Windows Explorer. Click on Network in the list on the left, and you should see a machine called UBUNTU in the right pane. Note: This example is shown in Windows 7; the same steps should work for Windows XP and Vista, but we have not tested them. Double-click on UBUNTU, and you will see the folder you shared earlier! As well as any other folders you’ve shared from Ubuntu. Double click on the folder you want to access, and from there, you can move the files from the machine booted with Ubuntu to your Windows PC. Upload to an Online Service There are many services online that will allow you to upload files, either temporarily or permanently. As long as you aren’t transferring an entire hard drive, these services should allow you to transfer your important files from the Ubuntu environment to any other machine with Internet access. We recommend compressing the files that you want to move, both to save a little bit of bandwidth, and to save time clicking on files, as uploading a single file will be much less work than a ton of little files. To compress one or more files or folders, select them, and then right-click on one of the members of the group. Click Compress…. Give the compressed file a suitable name, and then select a compression format. We’re using .zip because we can open it anywhere, and the compression rate is acceptable. Click Create and the compressed file will show up in the location selected in the Compress window. Dropbox If you have a Dropbox account, then you can easily upload files from the Ubuntu environment to Dropbox. There is no explicit limit on the size of file that can be uploaded to Dropbox, though a free account begins with a total limit of 2 GB of files in total. Access your account through Firefox, which can be opened by clicking on the Firefox logo to the right of the System menu at the top of the screen. Once into your account, press the Upload button on top of the main file list. Because Flash is not installed in the Live CD environment, you will have to switch to the basic uploader. Click Browse…find your compressed file, and then click Upload file. Depending on the size of the file, this could take some time. However, once the file has been uploaded, it should show up on any computer connected through Dropbox in a matter of minutes. Google Docs Google Docs allows the upload of any type of file – making it an ideal place to upload files that we want to access from another computer. While your total allocation of space varies (mine is around 7.5 GB), there is a per-file maximum of 1 GB. Log into Google Docs, and click on the Upload button at the top left of the page. Click Select files to upload and select your compressed file. For safety’s sake, uncheck the checkbox concerning converting files to Google Docs format, and then click Start upload. Go Online – Through FTP If you have access to an FTP server – perhaps through your web hosting company, or you’ve set up an FTP server on a different machine – you can easily access the FTP server in Ubuntu and transfer files. Just make sure you don’t go over your quota if you have one. You will need to know the address of the FTP server, as well as the login information. Click on Places > Connect to Server… Choose the FTP (with login) Service type, and fill in your information. Adding a bookmark is optional, but recommended. You will be asked for your password. You can choose to remember it until you logout, or indefinitely. You can now browse your FTP server just like any other folder. Drop files into the FTP server and you can retrieve them from any computer with an Internet connection and an FTP client. Conclusion While at first the Ubuntu Live CD environment may seem claustrophobic, it has a wealth of options for connecting to peripheral devices, local computers, and machines on the Internet – and this article has only scratched the surface. Whatever the storage medium, Ubuntu’s got an interface for it! Similar Articles Productive Geek Tips Backup Your Windows Live Writer SettingsMove a Window Without Clicking the Titlebar in UbuntuRecover Deleted Files on an NTFS Hard Drive from a Ubuntu Live CDCreate a Bootable Ubuntu USB Flash Drive the Easy WayReset Your Ubuntu Password Easily from the Live CD TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Tech Fanboys Field Guide Check these Awesome Chrome Add-ons iFixit Offers Gadget Repair Manuals Online Vista style sidebar for Windows 7 Create Nice Charts With These Web Based Tools Track Daily Goals With 42Goals

    Read the article

  • Machine Check Exception

    - by Karl Entwistle
    When trying to install ubuntu-12.04-desktop-amd64.iso from USB I get one of the following errors http://en.wikipedia.org/wiki/Machine_Check_Exception states the error can occur due to -poorly fitted heatsink/computer fans (the same problem can happen with excessive dust in the CPU fan) -an overloaded internal or external power supply (fixable by upgrading) So I tried the following -Using rubbing alcohol to remove all the thermal paste from the CPU and heatsink, I then reseated the CPU after checking all the pins on the MOBO, everything seems fine. -Boot without the GPU to see if was the PSU that is being over stressed. -Removing all RAM apart from one stick and running a Memtest86 which it passed -Using Ubuntu 10.04.4 Desktop 64 bit (Different USB slots and USB sticks) -Using Ubuntu 12.04 Desktop 64 bit (Different USB slots and USB sticks) -Reset the BIOS using the Clear CMOS jumper -Removing all HD power cables and SATA cables -Updating the BIOS from F2 to F6 My PC is using the following parts. -Gigabyte GA-Z77-DS3H (F6 BIOS) -Intel Core i7 3770K 3.5GHz Socket 1155 -G-Skill 8GB (2x4GB) DDR3 1600Mhz RipjawsX Memory Kit CL9 (9-9-9-24) 1.5V -Be Quiet Shadow Rock Pro -Be Quiet Pure Power 730W Modular PSU -Sapphire HD 6870 1GB GDDR5 DVI HDMI DisplayPort PCI-E Graphics Card Any ideas?

    Read the article

  • Best Practices - updated: which domain types should be used to run applications

    - by jsavit
    This post is one of a series of "best practices" notes for Oracle VM Server for SPARC (formerly named Logical Domains). This is an updated and enlarged version of the post on this topic originally posted October 2012. One frequent question "what type of domain should I use to run applications?" There used to be a simple answer: "run applications in guest domains in almost all cases", but now there are more things to consider. Enhancements to Oracle VM Server for SPARC and introduction of systems like the current SPARC servers including the T4 and T5 systems, the Oracle SuperCluster T5-8 and Oracle SuperCluster M6-32 provide scale and performance much higher than the original servers that ran domains. Single-CPU performance, I/O capacity, memory sizes, are much larger now, and far more demanding applications are now being hosted in logical domains. The general advice continues to be "use guest domains in almost all cases", meaning, "use virtual I/O rather than physical I/O", unless there is a specific reason to use the other domain types. The sections below will discuss the criteria for choosing between domain types. Review: division of labor and types of domain Oracle VM Server for SPARC offloads management and I/O functionality from the hypervisor to domains (also called virtual machines), providing a modern alternative to older VM architectures that use a "thick", monolithic hypervisor. This permits a simpler hypervisor design, which enhances reliability, and security. It also reduces single points of failure by assigning responsibilities to multiple system components, further improving reliability and security. Oracle VM Server for SPARC defines the following types of domain, each with their own roles: Control domain - management control point for the server, runs the logical domain daemon and constraints engine, and is used to configure domains and manage resources. The control domain is the first domain to boot on a power-up, is always an I/O domain, and is usually a service domain as well. It doesn't have to be, but there's no reason to not leverage it for virtual I/O services. There is one control domain per T-series system, and one per Physical Domain (PDom) on an M5-32 or M6-32 system. M5 and M6 systems can be physically domained, with logical domains within the physical ones. I/O domain - a domain that has been assigned physical I/O devices. The devices may be one more more PCIe root complexes (in which case the domain is also called a root complex domain). The domain has native access to all the devices on the assigned PCIe buses. The devices can be any device type supported by Solaris on the hardware platform. a SR-IOV (Single-Root I/O Virtualization) function. SR-IOV lets a physical device (also called a physical function) or PF) be subdivided into multiple virtual functions (VFs) which can be individually assigned directly to domains. SR-IOV devices currently can be Ethernet or InfiniBand devices. direct I/O ownership of one or more PCI devices residing in a PCIe bus slot. The domain has direct access to the individual devices An I/O domain has native performance and functionality for the devices it owns, unmediated by any virtualization layer. It may also have virtual devices. Service domain - a domain that provides virtual network and disk devices to guest domains. The services are defined by commands that are run in the control domain. It usually is an I/O domain as well, in order for it to have devices to virtualize and serve out. Guest domain - a domain whose devices are all virtual rather than physical: virtual network and disk devices provided by one or more service domains. In common practice, this is where applications are run. Device considerations Consider the following when choosing between virtual devices and physical devices: Virtual devices provide the best flexibility - they can be dynamically added to and removed from a running domain, and you can have a large number of them up to a per-domain device limit. Virtual devices are compatible with live migration - domains that exclusively have virtual devices can be live migrated between servers supporting domains. On the other hand: Physical devices provide the best performance - in fact, native "bare metal" performance. Virtual devices approach physical device throughput and latency, especially with virtual network devices that can now saturate 10GbE links, but physical devices are still faster. Physical I/O devices do not add load to service domains - all the I/O goes directly from the I/O domain to the device, while virtual I/O goes through service domains, which must be provided sufficient CPU and memory capacity. Physical I/O devices can be other than network and disk - we virtualize network, disk, and serial console, but physical devices can be the wide range of attachable certified devices, including things like tape and CDROM/DVD devices. In some cases the lines are now blurred: virtual devices have better performance than previously: starting with Oracle VM Server for SPARC 3.1 there is near-native virtual network performance. There is more flexibility with physical devices than before: SR-IOV devices can now be dynamically reconfigured on domains. Tradeoffs one used to have to make are now relaxed: you can often have the flexibility of virtual I/O with performance that previously required physical I/O. You can have the performance and isolation of SR-IOV with the ability to dynamically reconfigure it, just like with virtual devices. Typical deployment A service domain is generally also an I/O domain: otherwise it wouldn't have access to physical device "backends" to offer to its clients. Similarly, an I/O domain is also typically a service domain in order to leverage the available PCI buses. Control domains must be I/O domains, because they boot up first on the server and require physical I/O. It's typical for the control domain to also be a service domain too so it doesn't "waste" the I/O resources it uses. A simple configuration consists of a control domain that is also the one I/O and service domain, and some number of guest domains using virtual I/O. In production, customers typically use multiple domains with I/O and service roles to eliminate single points of failure, as described in Availability Best Practices - Avoiding Single Points of Failure . Guest domains have virtual disk and virtual devices provisioned from more than one service domain, so failure of a service domain or I/O path or device does not result in an application outage. This also permits "rolling upgrades" in which service domains are upgraded one at a time while their guests continue to operate without disruption. (It should be noted that resiliency to I/O device failures can also be provided by the single control domain, using multi-path I/O) In this type of deployment, control, I/O, and service domains are used for virtualization infrastructure, while applications run in guest domains. Changing application deployment patterns The above model has been widely and successfully used, but more configuration options are available now. Servers got bigger than the original T2000 class machines with 2 I/O buses, so there is more I/O capacity that can be used for applications. Increased server capacity made it attractive to run more vertically-scaled applications, such as databases, with higher resource requirements than the "light" applications originally seen. This made it attractive to run applications in I/O domains so they could get bare-metal native I/O performance. This is leveraged by the Oracle SuperCluster engineered systems mentioned previously. In those engineered systems, I/O domains are used for high performance applications with native I/O performance for disk and network and optimized access to the Infiniband fabric. Another technical enhancement is Single Root I/O Virtualization (SR-IOV), which make it possible to give domains direct connections and native I/O performance for selected I/O devices. Not all I/O domains own PCI complexes, and there are increasingly more I/O domains that are not service domains. They use their I/O connectivity for performance for their own applications. However, there are some limitations and considerations: at this time, a domain using physical I/O cannot be live-migrated to another server. There is also a need to plan for security and introducing unneeded dependencies: if an I/O domain is also a service domain providing virtual I/O to guests, it has the ability to affect the correct operation of its client guest domains. This is even more relevant for the control domain. where the ldm command must be protected from unauthorized (or even mistaken) use that would affect other domains. As a general rule, running applications in the service domain or the control domain should be avoided. For reference, an excellent guide to secure deployment of domains by Stefan Hinker is at Secure Deployment of Oracle VM Server for SPARC. To recap: Guest domains with virtual I/O still provide the greatest operational flexibility, including features like live migration. They should be considered the default domain type to use unless there is a specific requirement that mandates an I/O domain. I/O domains can be used for applications with the highest performance requirements. Single Root I/O Virtualization (SR-IOV) makes this more attractive by giving direct I/O access to more domains, and by permitting dynamic reconfiguration of SR-IOV devices. Today's larger systems provide multiple PCIe buses - for example, 16 buses on the T5-8 - making it possible to configure multiple I/O domains each owning their own bus. Service domains should in general not be used for applications, because compromised security in the domain, or an outage, can affect domains that depend on it. This concern can be mitigated by providing guests' their virtual I/O from more than one service domain, so interruption of service in one service domain does not cause an application outage. The control domain should in general not be used to run applications, for the same reason. Oracle SuperCluster uses the control domain for applications, but it is an exception. It's not a general purpose environment; it's an engineered system with specifically configured applications and optimization for optimal performance. These are recommended "best practices" based on conversations with a number of Oracle architects. Keep in mind that "one size does not fit all", so you should evaluate these practices in the context of your own requirements. Summary Higher capacity servers that run Oracle VM Server for SPARC are attractive for applications with the most demanding resource requirements. New deployment models permit native I/O performance for demanding applications by running them in I/O domains with direct access to their devices. This is leveraged in SPARC SuperCluster, and can be leveraged in T-series servers to provision high-performance applications running in domains. Carefully planned, this can be used to provide peak performance for critical applications. That said, the improved virtual device performance in Oracle VM Server means that the default choice should still be guest domains with virtual I/O.

    Read the article

  • Is there a Generic USB TouchScreen Driver 12.04?

    - by lbjoum
    Is there a Generic USB TouchScreen Driver 12.04? Device 03eb:201c I've been looking for 4 days solid (not very skilled) and can't find a solution. I have a generic tablet: C97- Atom N2600 9.7" 2GB 32GB Bluetooth WiFi WebCam Ext.3G Windows 7 Tablet PC Using 12.04 and cannot find a driver. I installed android and the touchscreen works but still lots of other bugs. Oh well, stuck with Windows 7 and not happy about it. Will keep trying, but too much time wasted already. If you have a solution I would love to try it. ubuntu@ubuntu:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 0cf2:6238 ENE Technology, Inc. Bus 001 Device 003: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB Bus 001 Device 005: ID 05e1:0100 Syntek Semiconductor Co., Ltd 802.11g + Bluetooth Wireless Adapter Bus 001 Device 006: ID 090c:3731 Silicon Motion, Inc. - Taiwan (formerly Feiya Technology Corp.) Bus 003 Device 002: ID 03eb:201c Atmel Corp. at90usbkey sample firmware (HID mouse) (from Windows: HID\VID_03EB&PID_201C\6&5F38127&0&0000 USB\VID_03EB&PID_201C\5&193ADADC&1&2 ) Bus 001 Device 007: ID 0518:0001 EzKEY Corp. USB to PS2 Adaptor v1.09 Bus 001 Device 008: ID 192f:0916 Avago Technologies, Pte. ubuntu@ubuntu:~$ sudo lsusb -v Bus 003 Device 002: ID 03eb:201c Atmel Corp. at90usbkey sample firmware (HID mouse) Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 32 idVendor 0x03eb Atmel Corp. idProduct 0x201c at90usbkey sample firmware (HID mouse) bcdDevice 45.a2 iManufacturer 1 CDT iProduct 2 9.75 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 34 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x00 (Missing must-be-set bit!) (Bus Powered) MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 0 No Subclass bInterfaceProtocol 0 None iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.11 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 177 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 5 Device Status: 0x00fb Self Powered Remote Wakeup Enabled Debug Mode ubuntu@ubuntu:~$ sudo lshw ubuntu description: Notebook product: To be filled by O.E.M. (To be filled by O.E.M.) vendor: To be filled by O.E.M. version: To be filled by O.E.M. serial: To be filled by O.E.M. width: 32 bits capabilities: smbios-2.7 dmi-2.7 smp-1.4 smp configuration: boot=normal chassis=notebook cpus=2 family=To be filled by O.E.M. sku=To be filled by O.E.M. uuid=00020003-0004-0005-0006-000700080009 *-core description: Motherboard product: Tiger Hill vendor: INTEL Corporation physical id: 0 version: To be filled by O.E.M. serial: To be filled by O.E.M. slot: To be filled by O.E.M. *-firmware description: BIOS vendor: American Megatrends Inc. physical id: 0 version: 4.6.5 date: 08/24/2012 size: 64KiB capacity: 960KiB capabilities: pci upgrade shadowing cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer acpi usb biosbootspecification *-cpu:0 description: CPU product: Intel(R) Atom(TM) CPU N2600 @ 1.60GHz vendor: Intel Corp. physical id: 4 bus info: cpu@0 version: 6.6.1 serial: 0003-0661-0000-0000-0000-0000 slot: CPU 1 size: 1600MHz capacity: 1600MHz width: 64 bits clock: 400MHz capabilities: x86-64 boot fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx constant_tsc arch_perfmon pebs bts nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm movbe lahf_lm arat configuration: cores=2 enabledcores=1 id=2 threads=2 *-cache:0 description: L1 cache physical id: 5 slot: L1-Cache size: 24KiB capacity: 24KiB capabilities: internal write-back unified *-cache:1 description: L2 cache physical id: 6 slot: L2-Cache size: 512KiB capacity: 512KiB capabilities: internal varies unified *-logicalcpu:0 description: Logical CPU physical id: 2.1 width: 64 bits capabilities: logical *-logicalcpu:1 description: Logical CPU physical id: 2.2 width: 64 bits capabilities: logical *-logicalcpu:2 description: Logical CPU physical id: 2.3 width: 64 bits capabilities: logical *-logicalcpu:3 description: Logical CPU physical id: 2.4 width: 64 bits capabilities: logical *-memory description: System Memory physical id: 28 slot: System board or motherboard size: 2GiB *-bank:0 description: SODIMM [empty] product: [Empty] vendor: [Empty] physical id: 0 serial: [Empty] slot: DIMM0 *-bank:1 description: SODIMM DDR3 Synchronous 800 MHz (1.2 ns) vendor: 69 physical id: 1 serial: 00000210 slot: DIMM1 size: 2GiB width: 64 bits clock: 800MHz (1.2ns) *-cpu:1 physical id: 1 bus info: cpu@1 version: 6.6.1 serial: 0003-0661-0000-0000-0000-0000 size: 1600MHz capabilities: ht configuration: id=2 *-logicalcpu:0 description: Logical CPU physical id: 2.1 capabilities: logical *-logicalcpu:1 description: Logical CPU physical id: 2.2 capabilities: logical *-logicalcpu:2 description: Logical CPU physical id: 2.3 capabilities: logical *-logicalcpu:3 description: Logical CPU physical id: 2.4 capabilities: logical *-pci description: Host bridge product: Atom Processor D2xxx/N2xxx DRAM Controller vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 03 width: 32 bits clock: 33MHz *-display UNCLAIMED description: VGA compatible controller product: Atom Processor D2xxx/N2xxx Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 32 bits clock: 33MHz capabilities: pm msi vga_controller bus_master cap_list configuration: latency=0 resources: memory:dfe00000-dfefffff ioport:f100(size=8) *-multimedia description: Audio device product: N10/ICH 7 Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 02 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:42 memory:dff00000-dff03fff *-pci:0 description: PCI bridge product: N10/ICH 7 Family PCI Express Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: 02 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:2000(size=4096) memory:80000000-801fffff ioport:80200000(size=2097152) *-usb:0 description: USB controller product: N10/ICH 7 Family USB UHCI Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:23 ioport:f0a0(size=32) *-usb:1 description: USB controller product: N10/ICH 7 Family USB UHCI Controller #2 vendor: Intel Corporation physical id: 1d.1 bus info: pci@0000:00:1d.1 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:19 ioport:f080(size=32) *-usb:2 description: USB controller product: N10/ICH 7 Family USB UHCI Controller #3 vendor: Intel Corporation physical id: 1d.2 bus info: pci@0000:00:1d.2 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:18 ioport:f060(size=32) *-usb:3 description: USB controller product: N10/ICH 7 Family USB UHCI Controller #4 vendor: Intel Corporation physical id: 1d.3 bus info: pci@0000:00:1d.3 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:16 ioport:f040(size=32) *-usb:4 description: USB controller product: N10/ICH 7 Family USB2 EHCI Controller vendor: Intel Corporation physical id: 1d.7 bus info: pci@0000:00:1d.7 version: 02 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:23 memory:dff05000-dff053ff *-pci:1 description: PCI bridge product: 82801 Mobile PCI Bridge vendor: Intel Corporation physical id: 1e bus info: pci@0000:00:1e.0 version: e2 width: 32 bits clock: 33MHz capabilities: pci subtractive_decode bus_master cap_list *-isa description: ISA bridge product: NM10 Family LPC Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 02 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: latency=0 *-storage description: SATA controller product: N10/ICH7 Family SATA Controller [AHCI mode] vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 logical name: scsi0 version: 02 width: 32 bits clock: 66MHz capabilities: storage msi pm ahci_1.0 bus_master cap_list emulated configuration: driver=ahci latency=0 resources: irq:41 ioport:f0f0(size=8) ioport:f0e0(size=4) ioport:f0d0(size=8) ioport:f0c0(size=4) ioport:f020(size=16) memory:dff04000-dff043ff *-disk description: ATA Disk product: BIWIN SSD physical id: 0.0.0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 1206 serial: 123403501060 size: 29GiB (32GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=8fbe402b *-volume:0 description: Windows NTFS volume physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 version: 3.1 serial: 249bde5d-8246-9a40-88c7-2d5e3bcaf692 size: 19GiB capacity: 19GiB capabilities: primary bootable ntfs initialized configuration: clustersize=4096 created=2011-04-04 02:27:51 filesystem=ntfs state=clean *-volume:1 description: Windows NTFS volume physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 version: 3.1 serial: de12d40f-d5ca-8642-b306-acd9349fda1a size: 10231MiB capacity: 10GiB capabilities: primary ntfs initialized configuration: clustersize=4096 created=2011-04-04 01:52:26 filesystem=ntfs state=clean *-serial UNCLAIMED description: SMBus product: N10/ICH 7 Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 02 width: 32 bits clock: 33MHz configuration: latency=0 resources: ioport:f000(size=32) *-scsi:0 physical id: 2 bus info: usb@1:1 logical name: scsi4 capabilities: emulated scsi-host configuration: driver=usb-storage *-disk description: SCSI Disk physical id: 0.0.0 bus info: scsi@4:0.0.0 logical name: /dev/sdb size: 29GiB (31GB) capabilities: partitioned partitioned:dos configuration: signature=00017463 *-volume description: Windows FAT volume vendor: mkdosfs physical id: 1 bus info: scsi@4:0.0.0,1 logical name: /dev/sdb1 logical name: /cdrom version: FAT32 serial: 129b-4f87 size: 29GiB capacity: 29GiB capabilities: primary bootable fat initialized configuration: FATs=2 filesystem=fat mount.fstype=vfat mount.options=rw,relatime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro state=mounted *-scsi:1 physical id: 3 bus info: usb@1:3.1 logical name: scsi6 capabilities: emulated scsi-host configuration: driver=usb-storage *-disk description: SCSI Disk physical id: 0.0.0 bus info: scsi@6:0.0.0 logical name: /dev/sdc size: 7400MiB (7759MB) capabilities: partitioned partitioned:dos configuration: signature=c3072e18 *-volume description: Windows FAT volume vendor: mkdosfs physical id: 1 bus info: scsi@6:0.0.0,1 logical name: /dev/sdc1 logical name: /media/JOUM8G version: FAT32 serial: e676-9311 size: 7394MiB capacity: 7394MiB capabilities: primary bootable fat initialized configuration: FATs=2 filesystem=fat label=Android mount.fstype=vfat mount.options=rw,nosuid,nodev,relatime,uid=999,gid=999,fmask=0022,dmask=0077,codepage=cp437,iocharset=iso8859-1,shortname=mixed,showexec,utf8,flush,errors=remount-ro state=mounted ubuntu@ubuntu:~$ ubuntu@ubuntu:~$ xinput list ? Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? Plus More Enterprise LTD. USB-compliant keyboard id=10 [slave pointer (2)] ? ? USB Optical Mouse id=11 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Power Button id=7 [slave keyboard (3)] ? Sleep Button id=8 [slave keyboard (3)] ? Plus More Enterprise LTD. USB-compliant keyboard id=9 [slave keyboard (3)] ? USB 2.0 Webcam - Front id=12 [slave keyboard (3)] ? AT Translated Set 2 keyboard id=13 [slave keyboard (3)] ubuntu@ubuntu:~$

    Read the article

  • Permission issues causes Unity Segmentation fault

    - by Dj Gilcrease
    I upgraded from 13.04 to 13.10 and I can boot to the unity-greeter and login just fine, but after login I just get a black screen with a cursor. I have tried following http://help.ubuntu.com/community/BinaryDriverHowto/ATI http://help.ubuntu.com/community/RadeonDriver and the manual install of the downloaded AMD drivers. All have the same affect. Also I have read Black screen after login with cursor I get a black screen after logging in ubuntu 13.04 black screen after login Ubuntu 13.10 - Black screen after login session Ubuntu 13.04 - Black screen with unresponsive cursor Upgrade to Ubuntu 13.04 Problem - Boots into Blank Black Screen All of which were no further help then the two support articles about ATI drivers So I switched back to the default drivers and went a little further into debugging, when I do ctrl+alt+F1 and login and try unity --debug > unity_start.log then ctrl+alt+F8 the screen stays black with a cursor and when I switch back ctrl+alt+F1 the contents of the log output are http://pastebin.com/rdQG4Hb0 However when I try sudo unity --debug > unity_start_root.log then ctrl+alt+F8, unity starts and the output of the log is http://pastebin.com/Yv4RD2j7 The fact that it starts as root tells be it is either a permissions issue of some required file or there is some setting that is specific to my user that is causing the SIGSEGV. So to narrow this down I activated the guest account and tried to login and got the same black screens with only a mouse cursor, so this tells me that it is not a configuration issue, but a permissions issue, so how do I narrow down which file has the wrong permissions? Also is there anything further that may help debug this issue? Ok after a few more hours of googling I found that if I add myself to the video group I can login and see the desktop, but there are lots of other permission related issues, so I am thinking something went wonky with PolicyKit during the upgrade, is there a way to reset PolicyKit settings for a user?

    Read the article

  • Set Firefox to Be On Top of Other Windows

    - by Asian Angel
    Sometimes you need to keep a close watch on a website and have Firefox remain in view regardless of the other apps running. See how you can keep Firefox in constant view with the Always on Top extension. Before If you have a webpage that you like to watch throughout the day but have a very busy desktop then Firefox can get lost in all of the clutter. Note: You can read about the ReloadEvery extension here. Even with a widescreen monitor sometimes there is just not enough room to keep everything in easy view while you are working on something. Always on Top in Action Once you have installed the extension you will notice that a new Toolbar Button has automatically been added to your Navigation Toolbar. At the moment this is the only on/off switch for the extension. Clicking on the Toolbar Button will enable Always on Top and the button will change to a blue color to indicate its’ active status. Click on it again to disable it. Do anything that you like in the other windows…Firefox will still be the topmost window and easy to view. Conclusion The Always on Top extension was made to do just one thing and it does it very well…keeping your Firefox window on top. Being able to turn it on or off without digging through a bunch of menus adds that extra level of convenience. Links Download the Always on Top extension (Mozilla Add-ons) Similar Articles Productive Geek Tips Quick Hits: 11 Firefox Tab How-TosQuick Tip: Save Windows and Tabs When Restarting FirefoxInstalling Windows Media Player Plugin for FirefoxDisable Web Site Window Resizing in FirefoxFix for Firefox memory leak on Windows TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 VMware Workstation 7 Acronis Online Backup The iPod Revolution Ultimate Boot CD can help when disaster strikes Windows Firewall with Advanced Security – How To Guides Sculptris 1.0, 3D Drawing app AceStock, a Tiny Desktop Quote Monitor Gmail Button Addon (Firefox)

    Read the article

  • Oracle Solaris 11.1 Announced at Oracle OpenWorld

    - by glynn
    One of the highlights for me at Oracle OpenWorld was our announcement of the next update version to Oracle Solaris 11, named Oracle Solaris 11.1. Since November 2011, we've done a lot of work not only to polish existing features and fix literally hundreds of bugs, but also add many new features that give yet more reasons for using Oracle Solaris as the deployment platform for Oracle workloads - particularly the Oracle database. Over the last few years since the Sun Microsystems acquisition, we've had our developers sitting in Redwood Shores with the Oracle database team figuring out how to best optimize that combination and provide a level of integration that no other vendor (or solution) can match. Oracle Solaris 11.1 is often the first release many customers will adopt due to perceived instability of '.0' releases. In reality, however, we've seen incredible adoption already and all our existing customers are loving the new technologies like Image Packaging System (IPS), Automated Installer and ZFS Boot Environments, consolidated network management and network virtualization, and of course the existing features that are so critical to creating private, hybrid or public cloud environments like the Oracle Solaris ZFS file system and Oracle Solaris Zones server virtualization. If you haven't already gotten on board, there's plenty chance to catch up. More importantly, Oracle Solaris 11.1 really provides a platform that is significantly easier to manage than any previous Solaris releases - to the extent that it should be relatively straightforward for any experienced Linux administrator to get up to speed (if they're struggling, we have ways to help). So take a look at what's new in Oracle Solaris 11.1 and start planning your deployment now! If you missed the announcement, you can see the full video of John Fowler's keynote at Oracle OpenWorld here:

    Read the article

  • Correct drivers for AMD Radeon™ HD 7650M

    - by Hailwood
    So, I have a Sony Vaio sve15118fg running Ubuntu 12.10 which comes with an AMD Radeon™ HD 7650M graphics chip. This was all working fine until some updates (note sure what they were) came through, after installing my laptop now no longer boots properly, specifically: Upon attempting to boot the screen starts flicking violent striped horizontal lines. This can only be corrected via the power button. Attempting to do anything in recovery - bar dropping to a root shell - runs fsck which ends up hanging (although the system still responds there is no HDD activity). This is remedied via Ctrl+Alt+Delete to restart the system. Running fsck manually from the root shell completes successfully. I have attempted numerous things including removing all propriety drivers, Trying the two installed propriety drivers, installing the latest beta driver from AMD. etc. These all yeild various results, such as the same as above, or a gnome-fallback session, or a gnome-shell session with various flickers and graphical artifacts. So, I am wondering, what the heck do I have to do to get this to work?!? I don't really game, especially in ubuntu, so I just want a working system! not fussed about 3d acceleration of whatever...

    Read the article

  • Oracle University Nouveaux cours (Week 35)

    - by swalker
    Parmi les nouveautés d’Oracle Université de ce mois-ci, vous trouverez : Fusion Middleware Oracle Directory Services 11g: Administration (5 days) Oracle SOA Suite 11g: Essential Concepts (Training on Demand) e-Business Suite R12 Oracle HRMS iRecruitment Fundamentals (Self-Study Course) R12 Oracle Payroll Fundamentals: Administration (Self-Study Course) R12 Oracle HRMS System Administration Fundamentals (Self-Study Course) R12 Oracle HRMS Self Service Fundamentals (Self-Study Course) R12 Oracle HRMS Implement and Use Fast Formula (Self-Study Course) R12 HRMS Work Structures Fundamentals (Self-Study Course) R12 HRMS Total Compensation Foundations (Self-Study Course) Siebel Siebel 8.1.x Chat and Voice Integration Using CCA (Self-Study Course) Siebel 8.1.x Search using Oracle Secure Enterprise Search (Self-Study Course) Siebel 8.1.x COM Web Services (Self-Study Course) Siebel 8.1.x COM Asset Based Order Management (Self-Study Course) Siebel 8.1.x COM: What is New in Product Configurator (Self-Study Course) Siebel 8.1.x COM Product Configurator Caching & Performance Management (Self-Study Course) Siebel 8.1.x COM PSP Engine Caching and Performance Management (Self-Study Course) Siebel 8.1.x Remote: Administration (Self-Study Course) Siebel 8.1.x Remote: Technical Foundations (Self-Study Course) Siebel Tools: Configuring Chart and Tree Applets (Self-Study Course) Sun - Server Administration SPARC SuperCluster Administration and Maintenance Seminar (2 days) OPN Only Sparc T4-Based Servers Installation Boot Camp (1 day) Primavera Primavera P6 Application Administration Rel 8.x (2 days) Oracle Retail Retail Merchandising System (RMS) Business Overview (Self-Study Course) Retail Invoice Matching (ReIM) Product Overview (Self-Study Course) Retail Invoice Matching (ReIM) Business Introduction (Self-Study Course) Retail Demand Forecasting: RDF Classic Product Overview (Self-Study Course) Retail Demand Forecasting Introduction (Self-Study Course) Retail Data Warehouse (RDW) Overview 13.1 (Self-Study Course) Oracle Retail Point-of-Service (POS) Product Overview (Self-Study Course) Retail Sales Audit (ReSA) Product Overview (Self-Study Course) Retail Price Management (RPM) Product Overview (Self-Study Course) Retail Merchandising System (RMS) Technical Introduction (Self-Study Course) Oracle Retail Integration Bus (RIB) Product Overview (Self-Study Course) Oracle Communiucations Unified Communications Suite Convergence Customization (2 days) OSM Foundations I: Tasks, Processes and Orders Contacter l’ équipe locale d’ Oracle University pour toute information et dates de cours. Restez connecté à Oracle University : LinkedIn OracleMix Twitter Facebook Google+

    Read the article

  • unable to load nvidia(bumblebee) in ubuntu 14.04 (only nouveau loads)

    - by Ubuntuser
    Bumblebee stopped working on my system after upgrading to stable version of Ubuntu 14.04. DUring installation I get this error rmmod: ERROR: Module nouveau is in use Setting up bumblebee (3.2.1-90~trustyppa1) ... Selecting 01:00:0 as discrete nvidia card. If this is incorrect, edit the BusID line in /etc/bumblebee/xorg.conf.nouveau . bumblebeed start/running, process 11133 Processing triggers for initramfs-tools (0.103ubuntu4.1) ... update-initramfs: Generating /boot/initrd.img-3.14.1-031401-generic Setting up bumblebee-nvidia (3.2.1-90~trustyppa1) ... Selecting 01:00:0 as discrete nvidia card. If this is incorrect, edit the BusID line in /etc/bumblebee/xorg.conf.nvidia rmmod: ERROR: Module nouveau is in use bumblebeed start/running, process 18284 It says nouveau is in use. I checked the loaded modules lsmod | grep nouveau nouveau 1097199 1 mxm_wmi 13021 1 nouveau ttm 85115 1 nouveau i2c_algo_bit 13413 2 i915,nouveau drm_kms_helper 52758 2 i915,nouveau drm 302817 7 ttm,i915,drm_kms_helper,nouveau wmi 19177 3 dell_wmi,mxm_wmi,nouveau video 19476 2 i915,nouveau However, I have nouveau in my blacklist cat /etc/modprobe.d/blacklist.conf | grep nouveau blacklist nouveau blacklist lbm-nouveau alias nouveau off alias lbm-nouveau off My grub is also set to nomodeset cat /etc/default/grub | grep nomodeset GRUB_CMDLINE_LINUX_DEFAULT="nomodeset quiet splash" My graphics card is nvidia optimus lspci | grep -i vga 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18) 01:00.0 VGA compatible controller: NVIDIA Corporation GT218M [GeForce 310M] (rev ff) I've raised a bug in launchpad: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1327598 Note: Nvidia-prime is working for me (partially). Frequent mouse locks. Interestingly, bumblebee works perfectly fine on my fedora 20 partition on this same laptop.

    Read the article

  • Restoring android after ubuntu touch fails

    - by deimus
    I'm trying to restore android after playing around with ubuntu touch I follow exactly the same steps described the ubuntu's wiki page i.e. Download the factory image corresponding to your device's model and version (initial table has links). Ensure the device is connected and powered on. Extract the downloaded file and cd into the extracted directory. run adb reboot-bootloader run ./flash-all.sh (use sudo if lack of permissions on the workstation don't allow you to talk to the device). The archive is downloaded successfully, checked the sha1 checksum everything is ok. But the ./flash-all.sh fails like this sending 'bootloader' (2308 KB)... OKAY [ 0.513s] writing 'bootloader'... OKAY [ 0.292s] finished. total time: 0.805s rebooting into bootloader... OKAY [ 0.007s] finished. total time: 0.008s sending 'radio' (12288 KB)... OKAY [ 2.668s] writing 'radio'... OKAY [ 1.372s] finished. total time: 4.040s rebooting into bootloader... OKAY [ 0.009s] finished. total time: 0.009s archive does not contain 'boot.sig' archive does not contain 'recovery.sig' failed to allocate 435793780 bytes error: update package missing system.img My device is Nexus 4. Tried both 4.2.2 and 4.3 androind versions for Nexus 4 still the same. Any ideas how problem can be solved ?

    Read the article

  • Design and Print Your Own Christmas Cards in MS Word, Part 1

    - by Eric Z Goodnight
    Looking for a  little DIY fun this holiday season? Open up familiar tool MS Word and create simple, beautiful Christmas and Holiday cards, and impress your family with your crafting skills. This is the first part of a two part article. In this first section, we’ll tackle design in MS Word. In our second, we’ll cover supplies and proper printing methods to get a great look out of your dusty old inkjet. Latest Features How-To Geek ETC The How-To Geek Guide to Learning Photoshop, Part 8: Filters Get the Complete Android Guide eBook for Only 99 Cents [Update: Expired] Improve Digital Photography by Calibrating Your Monitor The How-To Geek Guide to Learning Photoshop, Part 7: Design and Typography How to Choose What to Back Up on Your Linux Home Server How To Harmonize Your Dual-Boot Setup for Windows and Ubuntu Hang in There Scrat! – Ice Age Wallpaper How Do You Know When You’ve Passed Geek and Headed to Nerd? On The Tip – A Lamborghini Theme for Chrome and Iron What if Wile E. Coyote and the Road Runner were Human? [Video] Peaceful Winter Cabin Wallpaper Store Tabs for Later Viewing in Opera with Tab Vault

    Read the article

  • Ubuntu Desktop shifted to right

    - by Sunny Kumar Aditya
    I am using Ubuntu 12.04 (precise) Kernel : 3.5.0-18-generic I am encountering a strange problem, my whole desktop has shifted to right. This happened after I restored my system, I was getting a blank screen earlier.(something is better than nothing). For some reason it also shows my display as laptop. Running xrandr xrandr: Failed to get size of gamma for output default Screen 0: minimum 640 x 480, current 1024 x 768, maximum 1024 x 768 default connected 1024x768+0+0 0mm x 0mm 1024x768 0.0* 800x600 0.0 640x480 0.0 Running lspci lspci -nn | grep VGA 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0102] (rev 09) My Display on window supports maximum of 1366*768. I do not want to reinstall everything please help. It is cycled around as mentioned by Eliah Kagan For correcting my blank screen issue I edited my grub file I edited this line and added nomodeset, without it screen gets all grained up. GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nomodeset " When I boot from live CD also I get the same shifted screen Update 2 Tried booting from live CD with 11.04 same issue Update 3 .xsession-errors file : http://pastebin.com/uveSgNa8 Update 4 xrandr -q | grep -w connected xrandr: Failed to get size of gamma for output default default connected 1024x768+0+0 0mm x 0mm

    Read the article

  • How To Setup Email Alerts on Linux Using Gmail or SMTP

    - by Sysadmin Geek
    Linux machines may require administrative intervention in countless ways, but without manually logging into them how would you know about it? Here’s how to setup emails to get notified when your machines want some tender love and attention. Of course, this technique is meant for real servers, but if you’ve got a Linux box sitting in your house acting as a home server, you can use it there as well. In fact, since many home ISPs block regular outbound email, you might find this technique a great way to ensure you still get administration emails, even from your home servers. Latest Features How-To Geek ETC The How-To Geek Guide to Learning Photoshop, Part 8: Filters Get the Complete Android Guide eBook for Only 99 Cents [Update: Expired] Improve Digital Photography by Calibrating Your Monitor The How-To Geek Guide to Learning Photoshop, Part 7: Design and Typography How to Choose What to Back Up on Your Linux Home Server How To Harmonize Your Dual-Boot Setup for Windows and Ubuntu Hang in There Scrat! – Ice Age Wallpaper How Do You Know When You’ve Passed Geek and Headed to Nerd? On The Tip – A Lamborghini Theme for Chrome and Iron What if Wile E. Coyote and the Road Runner were Human? [Video] Peaceful Winter Cabin Wallpaper Store Tabs for Later Viewing in Opera with Tab Vault

    Read the article

  • Virtualization in Solaris 11 Express

    - by lynn.rohrer(at)oracle.com
    In Oracle Solaris 10 we introduced Oracle Solaris Containers -- lightweight virtual application environments that allow you to consolidate your Oracle Solaris applications onto a single Oracle Solaris server and make the most of your system resources.The majority of our customers are now using Oracle Solaris Containers on their enterprise systems for applications ranging from web servers to Oracle Database installations. We can also make these Containers highly available with Oracle Solaris Cluster, the industry's first virtualization-aware enterprise cluster product. Using Oracle Solaris Cluster you can failover applications in a Container to another Container on a single system or across systems for additional availability.We've added significant features in Oracle Solaris 11 Express to improve and extend the Oracle Solaris Zone model:Integration of Zones with our new Solaris 11 packaging system (aka Image Packaging System) to provide easy software updates within a zoneSupport for Oracle Solaris 10 Zones to run your Solaris 10 applications unaltered on an Oracle Solaris 11 Express systemIntegration with the new Oracle Solaris 11 network stack architecture (more on this in a future blog post)Improved observability with the zonestat management interface and commandsDelegated administration rights for owners of individual non-global zonesTight integration with Oracle Solaris ZFS to allow dedicated datasets per zoneWith ZFS as the default file system we can now provide easy to manage Boot Environments for zonesThis quick summary is just to whet your appetite to learn more about Oracle Solaris 11 Express Zones enhancements. Fortunately we can serve a full meal at the Oracle Solaris 11 Express Technology Spotlight on Virtualization page on the Oracle Technical Network.

    Read the article

  • Read only file system

    - by Jack Moon
    I'm running Ubuntu 12.10, Upon opening any shell I get the following error: /home/jack/.rbenv/libexec/rbenv-init: line 87: cannot create temp file for here-document: Read-only file system I realised this wasn't simply a rbenv issue, as any file I try to write to returns an error saying the system is Read-only. I don't know how else to describe my problem, each time I boot up the system goes through a disk check, where it supposedly fixes several errors in my disk. Here is my /etc/fstab # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda1 during installation UUID=1cc4b2ab-a984-4516-ac25-6d64f5050244 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=4e0dfeae-701a-43ce-b5c6-65f15ab3d8e3 none swap sw 0 0 The entire file system is read-only. I've tried the following sudo fsck.ext4 -f /dev/sda1 which gave the following (shortened) output /dev/sda1: ***** FILE SYSTEM WAS MODIFIED ***** /dev/sda1: ***** REBOOT LINUX ***** /dev/sda1: 1257080/45268992 files (1.0% non-contiguous), 50696803/181051904 blocks

    Read the article

  • Why does integrity check fail for the 12.04.1 Alternate ISO?

    - by mghg
    I have followed various recommendations from the Ubuntu Documentation to create a bootable Ubuntu USB flash drive using the 12.04.1 Alternate install ISO-file for 64-bit PC. But the integrity test of the USB stick has failed and I do not see why. These are the steps I have made: Download of the 12.04.1 Alternate install ISO-file for 64-bit PC (ubuntu-12.04.1-alternate-amd64.iso) from http://releases.ubuntu.com/12.04.1/, as well as the MD5, SHA-1 and SHA-256 hash files and related PGP signatures Verification of the data integrity of the ISO-file using the MD5, SHA-1 and SHA-256 hash files, after having verified the hash files using the related PGP signature files (see e.g. https://help.ubuntu.com/community/HowToSHA256SUM and https://help.ubuntu.com/community/VerifyIsoHowto) Creation of a bootable USB stick using Ubuntu's Startup Disk Creator program (see http://www.ubuntu.com/download/help/create-a-usb-stick-on-ubuntu) Boot of my computer using the newly made 12.04.1 Alternate install on USB stick Selection of the option "Check disc for defects" (see https://help.ubuntu.com/community/Installation/CDIntegrityCheck) Steps 1, 2, 3 and 4 went without any problem or error messages. However, step 5 ended with an error message entitled "Integrity test failed" and with the following content: The ./install/netboot/ubuntu-installer/amd64/pxelinux.cfg/default file failed the MD5 checksum verification. Your CD-ROM or this file may have been corrupted. I have experienced the same (might only be similar since I have no exact notes) error message in previous attempts using the 12.04 (i.e. not the maintenance release) Alternate install ISO-file. I have in these cases tried to install anyway and have so far not experienced any problems to my knowledge. Is failed integrity check described above a serious error? What is the solution? Or can it be ignored without further problems?

    Read the article

  • The Worst of CES (Consumer Electronics Show) in 2011

    - by Justin Garrison
    This year, How-To Geek’s own Justin was on-site at the Consumer Electronics Show in Las Vegas, where every gadget manufacturer shows off their latest creations, and he was able to sit down and get hands-on with most of them. Here’s the ones that just didn’t make the cut. Make sure you also read our Best of CES 2011 post, where we cover the greatest gadgets that we found. Keep reading to take a look at the best of the worst products, that might have initially appeared good but showed their true colors after we spent some time with them Latest Features How-To Geek ETC HTG Projects: How to Create Your Own Custom Papercraft Toy How to Combine Rescue Disks to Create the Ultimate Windows Repair Disk What is Camera Raw, and Why Would a Professional Prefer it to JPG? The How-To Geek Guide to Audio Editing: The Basics How To Boot 10 Different Live CDs From 1 USB Flash Drive The 20 Best How-To Geek Linux Articles of 2010 Arctic Theme for Windows 7 Gives Your Desktop an Icy Touch Install LibreOffice via PPA and Receive Auto-Updates in Ubuntu Creative Portraits Peek Inside the Guts of Modern Electronics Scenic Winter Lane Wallpaper to Create a Relaxing Mood Access Your Web Apps Directly Using the Context Menu in Chrome The Deep – Awesome Use of Metal Objects as Deep Sea Creatures [Video]

    Read the article

  • LibreOffice - Can't drag and replace images [LibreOffice 3.5 and 3.6, Ubuntu 12.04]

    - by Anderxale
    My wife uses LibreOffice to create catalogues of a couple hundred items and then converts it to PDF. Man we love LibreOffice! Anyway I set up Windows-7 and Mint-14-Mate dual boot for her to ease into Linux. Today she was ready for Ubuntu and so I did a clean install on her machine. Everything was smooth but today when she tried to work she ran into an issue... She used to be able to download a folder full of images to use in her catalogues and then update her catalogues by replacing old images with new ones. It was so simple - Open an old catalogue, save with a new date, drag and drop replace images of items that no longer exist. The drag and drop process would scale the image and then crop it horizontally or vertically to fit. Now that I have installed Ubuntu 12.04 for her she can no longer replace images, it just does nothing... If she drags the image to the left or right of the original it appears next to the original so I know d&d works, unfortunately it does not resize or crop the image. I tried this on my laptop and my desktop... same thing! I then tried updating the LibreOffice to 3.6, no change. I then tried opening a virtual machine windows xp and Mint 14 on this computer and tried with 3.6 in those operating systems and it worked. Can anyone help? I have a lot of hope that there is an answer because Mint is based on Ubuntu/Debian and that distro can perform this task successfully! Sorry about writing a book....

    Read the article

  • How do I get vmbuilder to progress?

    - by Avery Chan
    I've used the following command to create my vm: vmbuilder kvm ubuntu --verbose --suite=precise --flavour=virtual --arch=amd64 -o --libvirt=qemu:///system --tmpfs=- --ip=192.168.2.1 --part=/home/shared/vm1/vmbuilder.partition --templates=/home/shared/vm1/templates --user=vadmin --name=VM-Administrator --pass=vpass --addpkg=vim-nox --addpkg=unattended-upgrades --addpkg=acpid --firstboot=/home/shared/vm1/boot.sh --mem=256 --hostname=chameleon --bridge=br0 I've been trying to follow the direction here. My system just outputs this and it hangs at the last line: 2012-06-26 18:08:29,225 INFO : Mounting tmpfs under /tmp/tmpJbf1dZtmpfs 2012-06-26 18:08:29,234 INFO : Calling hook: preflight_check 2012-06-26 18:08:29,243 INFO : Calling hook: set_defaults 2012-06-26 18:08:29,244 INFO : Calling hook: bootstrap How can I get vmbuilder to continue the process instead of dying right here? I'm running 12.04. EDIT: Adding some additional output details When I ^C to get out of the hang I see this: ^C2012-06-26 18:19:29,622 INFO : Unmounting tmpfs from /tmp/tmpJbf1dZtmpfs Traceback (most recent call last): File "/usr/bin/vmbuilder", line 24, in <module> cli.main() File "/usr/lib/python2.7/dist-packages/VMBuilder/contrib/cli.py", line 216, in main distro.build_chroot() File "/usr/lib/python2.7/dist-packages/VMBuilder/distro.py", line 83, in build_chroot self.call_hooks('bootstrap') File "/usr/lib/python2.7/dist-packages/VMBuilder/distro.py", line 67, in call_hooks call_hooks(self, *args, **kwargs) File "/usr/lib/python2.7/dist-packages/VMBuilder/util.py", line 165, in call_hooks getattr(context, func, log_no_such_method)(*args, **kwargs) File "/usr/lib/python2.7/dist-packages/VMBuilder/plugins/ubuntu/distro.py", line 136, in bootstrap self.suite.debootstrap() File "/usr/lib/python2.7/dist-packages/VMBuilder/plugins/ubuntu/dapper.py", line 269, in debootstrap run_cmd(*cmd, **kwargs) File "/usr/lib/python2.7/dist-packages/VMBuilder/util.py", line 113, in run_cmd fds = select.select([x.file for x in [mystdout, mystderr] if not x.closed], [], [])[0]

    Read the article

  • Z600 Workstation ACPI Fan Noise

    - by dpb
    Hi -- I have an HP z600 workstation that has the FAN running full when idle. In fact, after the boot, the fan never slows down or varies. I looked in dmesg, and noticed this: [ 1.516778] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS [ 1.516781] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8801b8c4e3e0), AE_ALREADY_EXISTS [ 1.516786] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error [ 1.519868] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS [ 1.519872] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8801b8c4e3e0), AE_ALREADY_EXISTS [ 1.624638] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS [ 1.624642] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8801b8c4e3e0), AE_ALREADY_EXISTS [ 1.624726] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS [ 1.624729] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8801b8c4e3e0), AE_ALREADY_EXISTS [ 1.624802] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS [ 1.624805] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8801b8c4e3e0), AE_ALREADY_EXISTS [ 1.624895] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS [ 1.624898] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8801b8c4e3e0), AE_ALREADY_EXISTS [ 1.624977] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS [ 1.624981] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8801b8c4e3e0), AE_ALREADY_EXISTS [ 1.625070] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS [ 1.625074] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8801b8c4e3e0), AE_ALREADY_EXISTS [ 1.625153] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS [ 1.625157] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8801b8c4e3e0), AE_ALREADY_EXISTS Anyone know what could be done to fix this?

    Read the article

  • Dual monitors won't accept new settings

    - by mschulze
    I'm trying to use dual monitors but every time I try to change the display settings(external monitor is on the right of the laptop, not the left etc...) my screens go black, then my laptop screen will come back "normally" but my external monitor will just flash different shades of red or black. I cannot interact with anything on my laptop screen even though I can move my mouse around. Even when the monitors attempt to revert back the external monitor continues to flicker instead of reverting. The only way to stop it is to hard-boot but the new settings aren't saved. Also, when the dual monitors are both working my laptop screen has two vertical black bars along its sides. It's like Natty just decided I couldn't use the outer inch and a half of my laptop screen. My external monitor doesn't have this problem, and my laptop uses its full screen size when the external monitor is not hooked up. Does anyone know what I'm doing wrong? I have an HP Pavillion dv7 and an HP w2338h external monitor. Thanks!

    Read the article

  • crash when using wireless network

    - by Erik
    ubuntu 12.04 32 bit When I start up my system almost instantly freezes, I found that the problem lays with my wireless network, because the crash is always t the same time as the message that tells me I am connected to a network when I start up connected to a cable everything works fine, I can even see that I am connected to our wireless network, until I unplug the ethernet cable, then it all freezes again the same happened when I boot from a live cd (from usb) The problem only occurs on my netbook, my laptop doesn't give any problems. I don't know if anyone else has had similar problems, or if anyone knows a solution... Thanks in advance! greetings Erik EDIT (21/3/2012): it seems there is some external factor involved, I'm using my netbook for about 50 minutes now while connected to the wireless network, and still it didn't crash strange enough, before these 50 minutes I had to put it down by holding the power button, because I decided to try it again, that time it did crash... before (while connected with an ethernet cable) I've been trying to get my Bluetooth working, that didn't succeed entirely, but I guess that might be a factor in the question why it doesn't crash at the moment now I rebooted, connected, and no crash... if it crashes again, I'll update this post again. in the meantime, if anyone has an idea on what could be a factor, and on how to create a crash using that factor, feel free to ask!

    Read the article

< Previous Page | 323 324 325 326 327 328 329 330 331 332 333 334  | Next Page >