Search Results

Search found 24073 results on 963 pages for 'mount point'.

Page 327/963 | < Previous Page | 323 324 325 326 327 328 329 330 331 332 333 334  | Next Page >

• WOL doesn't work if set to anything other than `a` but this setting makes it boot all the time

  - by Elton Carvalho

  I manage a small "cluster" of 4 Xeon machines with Intel boards in my lab. They are all plugged to a 5-port 3-Com switch with static IP addresses like 10.0.0.x. They are all running OpenSuse 11.4 and their /home/ is served by one of the machines (node00) via NFS. They are plugged to an UPS that can keep them on for ca. 15 minutes, but there are lots of electric shortages due to "unscheduled maintenace" that are longer than this. So they end up being powered down without notice. If I set the BIOS to turn them on after power shortages, the issue is that they all boot at the same time and, if node00 decides to run fsck in the /home/ partition, it does not finish booting before the others try to NFS mount their /home/. I am trying to make wake on lan work, so I can choose to boot the NFS clients only after the server has successfully booted. The problem is that when I run ethtool I get an output like this: Supports Wake-on: pumbag Wake-on: g Theoretically, it is set to wake on MagicPacket(tm), according to the manual. But sending the WOL packet using wol -i 10.0.0.255 $MACADDR does not wake up the box after I shut it down with halt. The ethernet link led blinks after I send the packet, so it appears to be getting to the machine. However, if I set it up with ethtool -s eth1 wol bag, the machine always wakes up right after halting, even if I don't send the Magic packet. This means that the device can wake up with LAN activity, but seems to be ignoring the magic packet. Setting wol ag does not wake the box with the MagicPacket. Does setting wol a mean that it should boot with any broadcast message? How can I diagnose the issue of the machine not waking up with the MagicPacket even though I am sending it and it's set up to wake up with it? Thanks in advance!

  Read the article

• Story and news-feed ideas for social network games

  - by arpine

  I am currently working on a educational and fun 2-in-1 game. As I am not a professional, I need advice on story and news-feed. The goal is simple-get richer, the story is about a worker who is trying to get over his/her financial problems and become rich. During the whole gaming process there is a news-feed (every day there are a couple of fresh news about what is going on). The news are fresh and individual so I need to write about 2000 pieces of news for 2 year gaming, maybe more. The problem is that I am not sure whether repetitive news can interest in this game. What can be done to make the news-making process easier but not boring from the point of view of the player?

  Read the article

• I Purchased a Domain that Previously had a Google Apps Account. How Do I Re-Create The Google Apps Account or Take Ownership of it?

  - by jmort253

  I recently purchased a domain name. We'll call it example.com. The previous owner of the domain had a Google Apps account. Now that I own the domain, I want to create a Google Apps account so I can point the domain www.example.com to one of my Google App Engine domains. We'll call it application.appspot.com. Google App Engine won't allow me to add the domain without verifying ownership by creating a Google Apps account or logging into Google Apps, but I don't have access to the old Google Apps account. We've tried going to this address to take ownership: https://www.google.com/a/cpanel/example.com/ResetAdminPassword?c=LONG_KEY&hl=en_US We retrieved a new password, but it wouldn't tell us what the login name is. How do you find out the login name?

  Read the article

• Conscience and unconscience from an AI/Robotics POV

  - by Tim Huffam

  Just pondering the workings of the human mind - from an AI/robotics point of view (either of which I know little about)..   If conscience is when you're thinking about it (processing it in realtime)... and unconscience is when you're not thinking about it (eg it's autonomous behaviour)..  would it be fair to say then, that:   - conscience is software   - unconscience is hardware   Considering that human learning is attributed to the number of neural connections made - and repetition is the key - the more the connections, the better one understands the subject - until it becomes a 'known'.   Therefore could this be likened to forming hard connections?  Eg maybe learning would progress from an MCU to FPGA's - therefore offloading realtime process to the hardware (FPGA or some such device)? t

  Read the article

• Crappy school, what to do? [closed]

  - by zhenka

  I started programming fairly late. I am 24 years old and about to graduate from a local public university with a really poorly designed curriculum and teachers. Most of the work felt like busy work, and no matter how much I try, it all feels like a waste. I know what a good curriculum looks like. I know what books I should read, but alas it's not so in my university. There is no way at this point that I can catch up to those graduating from places like MIT. My question and this is a serious one: what do I do? Do I just postpone learning the theory I would have learned until later and focus on software engineering skills? How important is the theory in terms of landing a job in New York? Any particular things I should focus on to land a software engineer job? I am very motivated and I just wish someone would give me the time and a chance.

  Read the article

• Where to start building a BaaS

  - by Wesley

  I'm building a Cloud Platform, and the next phase of design involves building an extensible BaaS back end. (see http://youtu.be/lNi-05-PyEw) The reason I think we can attempt this, is there are dozens of these kinds of extensible back end data proxy's popping up almost daily at this point, which tells me the enabling technology is there to build one from scratch in a few months. I'd like to start in the right area: What kind of Dev background should I look for? What kind of tech stack should I build on? What kind of costs can I expect in terms of man-hours, etc... I know there isn't one right answer here, but I think this is the right sub to post this in, and credit will go towards to most constructive answer.

  Read the article

• Show path of a body of where it should go after linear impulse is applied

  - by Farooq Arshed

  I am making a game with Andengine and Box2D. I have a dynamic body and I apply linear impulse on the body to move it around when the user have touched the screen. Now I want to show the path where the body will go when the user have touched. If you have played Angry Birds or Basket Ball Shoot or any other which have projectile motion with a path shown you will get my point. I want to show the white dots which are shown in those games.

  Read the article

• Smile publie un livre blanc sur la Gestion du Cycle de vie des Applications, qui dresse un tour d'horizon des concepts et apports de l'ALM

  Smile publie un livre blanc sur la Gestion du Cycle de vie des Applications qui dresse un tour d'horizon des concepts et apports de l'ALM La mise au point d'une application moderne et fiable demande l'utilisation d'un mécanisme de gestion coordonnée du cycle de développement de celle-ci, de son idée initiale à sa livraison et sa maintenance. Elle implique tous les acteurs participant de près ou de loin au projet tout en appliquant les processus propres à l'entreprise. L'ALM (Application Lifecycle Management) se positionne de nos jours comme un outil de pilotage stratégique pour l'entreprise, permettant la bonne gestion du portefeuille des projets logiciels. Assez bien impl...

  Read the article

• Case convention- Why the variation between languages?

  - by Jason

  Coming from a Java background, I'm very used to camelCase. When writing C, using the underscore wasn't a big adjustment, since it was only used sparingly when writing simple Unix apps. In the meantime, I stuck with camelCase as my style, as did most of the class. However, now that I'm teaching myself C# in preparation for my upcoming Usability Design class in the fall, the PascalCase convention of the language is really tripping me up and I'm having to rely on intellisense a great deal in order to make sure the correct API method is being used. To be honest, switching to the PascalCase layout hasn't quite sunk in the muscle memory just yet, and that is frustrating from my point of view. Since C# and Java are considered to be brother languages, as both are descended from C++, why the variation in the language conventions? Was it a personal decision by the creators based on their comfort level, or was it just to play mindgames with new introductees to the language?

  Read the article

• Essbase Data precision unraveled

  - by THE

  (guest reference added by Nancy) Anyone who has been working with Data import and exoport as well as the Essbase Excel Add In has probably come across a phenomenon that is called data precision: Lots of zeroes are added to any given number that has been calculated by Essbase, and this gets displayed as "10.0000000000001" or "9.99999999999999" instead of a simple "10" . This question is one of the recurring ones that Support get asked over and over again, and we therefore feel the need to give an explanation to it: I would like to point you to the note The Limits of Data Precision in Essbase (Doc ID 1311188.1) which explains in detail why these numbers are showing up and what to do about it.

  Read the article

• How selective do we need to be for an index to be used?

  - by TiborKaraszi

  You know the answer already: It depends. But I often see some percentage value quoted and the point of this post is to show that there is no such percentage value. To get the most out of this blog post, you should understand the basic structure for an index, i.e. how the b+ tree look like. You should also understand the difference between a clustered and a non-clustered index. In essence, you should be able to visualize these structures and searches through them as you read the text. If you find...(read more)

  Read the article

• Forward to other domain with CNAME

  - by xybrek

  In my GoDaddy DNS manager, I made some A Record that points to *.mirror for my domain Now when I access URL 123.mirror.mydomain.com from the browser I can see that my app is loaded, and its all OK. My problem now is when doing a CNAME point to the URL above on another domain like this: Accessing 123.otherdomain.com which I expect to "forward to" 123.mirror.mydomain.com I only get this 404 error: The IP 173.194.71.121 is actually ghs.googlehosted.com What I am missing here? Why 123.otherdomain.com which points to 123.mirror.mydomain.com cannot open that page and I think google is handing the web page request?

  Read the article

• Copyrighting software, templates, etc. under real name or screen name?

  - by Abluescarab

  My question is hopefully simple--should I copyright my work (art, software, web design, etc.) under my real name or my screen name? My real name and screen name are also easily connected with a bit of searching, so does it really matter in the end? I'm not a professional (at this point). I read this article: Is it a bad idea to sell Android apps in the Android Market under your real name? and they recommended releasing on the app market under a company name. I also read this article: On what name should I claim copyright in open source software?, but that didn't answer my question. I know it probably matters for big projects, but for little projects, does it matter? Thanks ahead of time!

  Read the article

• Thinking differently about BI delivery

  - by jamiet

  My day job involves implementing Business Intelligence (BI) solutions which, as I have said before, is simply about giving people the information they need to do their jobs. I’m always interested in learning about new ways of achieving that aim and that is my motivation for writing blog entries that are not concerned with SQL or SQL Server per se. Implementing BI systems usually involves hacking together a bunch third party products with some in-house “glue” and delivering information using some shiny, expensive web-based front-end tool; the list of vendors that supply such tools is big and ever-growing. No doubt these tools have their place and of late I have started to wonder whether they can be supplemented with different ways of delivering information. The problem I have with these separate web-based tools is exactly that – they are separate web-based tools. What’s the problem with that you might ask? I’ll explain! They force the information worker to go somewhere unfamiliar in order to get the information they need to do their jobs. Would it not be better if we could deliver information into the tools that those information workers are already using and not force them to go somewhere else? I look at the rise of blogging over recent years and I realise that what made them popular is that people can subscribe to RSS feeds and have information pushed to them in their tool of choice rather than them having to go and find the information for themselves in a tool that has been foisted upon them. Would it not be a good idea to adopt the principle of subscription for the benefit of delivering BI information as well? I think it would and in the rest of this blog entry I’ll outline such a scenario where the power of subscription could be used to enhance the delivery of information to information workers. Typical questions that information workers ask might be: What are my year-on-year sales figures? What was my footfall yesterday? How many widgets have I sold so far today? Each of those questions includes a time element and that shouldn’t surprise us, any BI system that I have worked on includes the dimension of time. Now, what do people use to view and organise their time-oriented information? Its not a trick question, they use a calendar and in the enterprise space more often than not that calendar is managed using Outlook. Given then that information workers are already looking at their calendar in Outlook anyway would it not make sense then to deliver information into that same calendar? Of course it would. Calendars are a great way of visualising information such as sales figures. Observe: Just in this single screenshot I have managed to convey a multitude of information. The information worker can see, at a glance, information about hourly/daily/weekly/monthly sales and, moreover, he/she is viewing that information right inside the tool that they use every day. There is no effort on the part of him/her, the information just appears hour after hour, day after day. Taking the idea further, each one of those calendar items could be a mini-dashboard in its own right. Double-clicking on an item could show a plethora of other information about that time slot such as breaking the sales down per region or year-over-year comparisons. Perhaps the title could employ a sparkline? Loads of possibilities. The point is that calendars are a completely natural way to visualise information; we should make more use of them! The real beauty of delivering information using calendars for us BI developers is that it should be so easy. In the case of Outlook we don’t need to write complicated VBA code that can go and manipulate a person’s calendar, simply publishing data in a format that Outlook can understand is sufficient and happily such formats already exist; iCalendar is the accepted format and the even more flexible xCalendar is hopefully on its way as well.   I’d like to make one last point and this one is with my SQL Server hat on. Reporting Services 2008 R2 introduced the ability to publish data as subscribable Atom feeds so it seems logical that it could also be a vehicle for delivering calendar feeds too. If you think this would be a good idea go and vote for it at Publish data as iCalendar feeds and please please please add some comments (especially if you vote it down). Work smarter, not harder! @Jamiet Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• How do I prevent a KActor from changing the orientation of its Z-Axis?

  - by Almo

  So I have an object that inherits from KActor that I would like to behave as a dynamic physics object, but I want its Z-Axis to remain upright, but very stiffly. I've tried the bStayUpright that triggers the "Stay Upright Spring". The problem is, it's a spring, and the object in question oscillates into position when I want it to remain oriented properly without wobbling. In the image above, the yellow block has fallen onto the gray box, and it is currently pivoting about the contact point as it tries to right itself. Should I be tweaking the StayUprightMaxTorque and StayUprightTorqueFactor parameters, or should I be using a Constraint of some sort?

  Read the article

• navigation menus and SEO

  - by Rodolfo

  I've always have my doubts about navigation menus effect on SEO. You know, the vertical menus on the top that show in every page in the site linking to main sections and subsections. My issue is that if not done dynamically (i.e. after page is loaded or something), from a search engine's point of view it probably looks like a whole bunch of links in the beginning of the page, and links that probably have nothing to do with the page being analyzed, so it's probably not only confusing it, but also giving link 'juice' to the wrong pages or reducing its value. When I've asked SEO people about this, I usually get a "Google is smart, they'll recognize it as a menu and ignore it" response, but I'm not convinced (and the 'Google is smart' argument sounds almost like religion discussion to me). So does it affect SEO negatively or not? Are there any official posts on this topic?

  Read the article

• Sparc Solaris 2.6 will not boot

  - by joshxdr

  I have a very old Sparc Solaris network that was working fine last week, but after a power outage none of the workstations will boot. The network looks like this: host A: solaris 2.6, shares /export/home to network by NFS host B: solaris 8, runs NIS server. Mounts /export/home/ by NFS. host C: RHEL5, shares /share to network by NFS. Mounts /export/home/ by NFS. I figured that the main problem was host A, since you need the home directories available for the other workstations to boot(?). Host A does not mount anything by NFS as far as I know. However, this workstation will NOT boot. The OBP bootup sequence looks like this: Boot device <blah> configuring network interface le0 Hostname <hostname> check file system <everything ok> check ufs filesystem <everything ok> NIS domainname is <name> starting router discovery starting rpc services: rpcbind keyserv ypbind done setting default interface for multicast: add net 224.0.0.0: gateway <hostname> <HANGS at this point> Is there some kind of debug mode so that I can get more detail as to why the workstation won't boot? Is my network structure inherently susceptible to power outage? Is there a way I can boot up to command line so I can at least turn off the NFS mounting?

  Read the article

• What should I worry about when changing OpenGL origin to upper left of screen?

  - by derivative

  For self education, I'm writing a 2D platformer engine in C++ using SDL / OpenGL. I initially began with pure SDL using the tutorials on sdltutorials.com and lazyfoo.net, but I'm now rendering in an OpenGL context (specifically immediate mode but I'm learning about VAOs/VBOs) and using SDL for interface, audio, etc. SDL uses a coordinate system with the origin in the upper left of the screen and the positive y-axis pointing down. It's easy to set up my orthographic projection in OpenGL to mirror this. I know that texture coordinates are a right-hand system with values from 0 to 1 -- flipping the texture vertically before rendering (well, flip the file before loading) yields textures that render correctly... which is fine if I'm drawing the entire texture, but ultimately I'll be using tilesets and can imagine problems. What should I be concerned about in terms of rendering when I do this? If anybody has any advice or they've done this themselves and can point out future pitfalls, that would be great, but really any thoughts would be appreciated.

  Read the article

• Programming methodologies at stackoverflow

  - by Prototype Stark

  I am in the middle of starting up a software company where we would use ASP.NET MVC and ASP.NET WebAPI extensively at shop. We will be a group of 4 and no more than 10 will work on any particular project at any point in time(these are ground rules). I would like to know, what programming methodologies best suit a small(guerilla) team. Specifically, I would also like to know which ones are being used at famous ASP.NET MVC shops like Stackoverflow. The ones I know are: Scrum and Waterfall(I know its bad). But what's the recommended way of development for smaller, group of 9-10 team. Also, will Test Driven Development help such a team in producing quality software? Are there any other techniques the team will have to know to be good at producing quality software?

  Read the article

• Ubuntu 13.10 Security Key

  - by Toby J

  I was attempting to install Ubuntu 13.10 today and it came up with a screen asking for me to setup a security key. In the first place, I'm not sure what a security key is, but It said I would have to enter it everytime I booted Ubuntu so I assume it's the same thing as a logon password in Windows 8. Is there anyway I can bypass this step without setting up a security key or logon password? I hate these things and have always avoided them in Windows. I don't need them as there is never anyone but myself and my wife on our computers. We are retired, no children or nieces, nephews, friends, etc. who ever use our computer and we don't have any security information such as SS #, etc. on it. Also, I quit the installation at this point but I was not seeing any of the screen prompts as listed in the setup instructions on the Ubuntu website. Has the setup for Ubuntu 13.10 changed since these instructions were written? Thanks

  Read the article

• XNA - Use Mouse To Rotate & Arrow Keys To Scroll A Linearly Wrapped Texture:

  - by The Thing

  Using XNA I'm working on my first, relatively simple, videogame for the PC. At the moment my game window is 1024 X 768 and I have a 'Starfield' linearly wrapped background texture 1280 X 1280 in size whose origin has been set to its center point (width / 2, height / 2). This texture is drawn onscreen using (graphics.PreferredBackBufferWidth / 2, graphics.PreferredBackBufferHeight / 2) to place the origin in the center of the window. I want to be able to use the horizontal movement of the mouse to rotate my texture left or right and use the arrow keys to scroll the texture in four directions. From my own related coding experiments I have found that once I rotate the texture it no longer scrolls in the direction I want, it's as if somehow the XNA framework's 'sense of direction' has been 'rotated' along with the texture. As an example of what I've described above lets say I rotate the texture 45 degrees to the right, then pressing the up arrow key results in the texture scrolling diagonally from top-right to bottom-left. This is not what I want, regardless of the degree or direction of rotation I want my texture to scroll straight up, straight down, or to the left or right depending on which arrow key was pressed. How do I go about accomplishing this? Any help or guidance is appreciated. To finish up there are two points I'd like to clarify: [1] The reason I'm using linear wrapping on my starfield texture is that it gives a nice impression of an endless starfield. [2] Using a texture at least 1280 X 1280 in conjunction with a game window of 1024 X 768 means that at no point in it's rotation will the edges of the texture become visible. Thanks for reading..... Update # 1 - as requested by RCIX: The code below is what I was referring to earlier when I mentioned 'related coding experiments'. As you can see I am scrolling a linearly wrapped texture in the direction I've moved the mouse relative to the center of the screen. This works perfectly if I don't rotate the texture, but once I do rotate it the direction of the scrolling gets messed up for some reason. public class Game1 : Microsoft.Xna.Framework.Game { GraphicsDeviceManager graphics; SpriteBatch spriteBatch; int x; int y; float z = 250f; Texture2D Overlay; Texture2D RotatingBackground; Rectangle? sourceRectangle; Color color; float rotation; Vector2 ScreenCenter; Vector2 Origin; Vector2 scale; Vector2 Direction; SpriteEffects effects; float layerDepth; public Game1() { graphics = new GraphicsDeviceManager(this); Content.RootDirectory = "Content"; } protected override void Initialize() { graphics.PreferredBackBufferWidth = 1024; graphics.PreferredBackBufferHeight = 768; graphics.ApplyChanges(); Direction = Vector2.Zero; IsMouseVisible = true; ScreenCenter = new Vector2(graphics.PreferredBackBufferWidth / 2, graphics.PreferredBackBufferHeight / 2); Mouse.SetPosition((int)graphics.PreferredBackBufferWidth / 2, (int)graphics.PreferredBackBufferHeight / 2); sourceRectangle = null; color = Color.White; rotation = 0.0f; scale = new Vector2(1.0f, 1.0f); effects = SpriteEffects.None; layerDepth = 1.0f; base.Initialize(); } protected override void LoadContent() { spriteBatch = new SpriteBatch(GraphicsDevice); Overlay = Content.Load<Texture2D>("Overlay"); RotatingBackground = Content.Load<Texture2D>("Background"); Origin = new Vector2((int)RotatingBackground.Width / 2, (int)RotatingBackground.Height / 2); } protected override void UnloadContent() { } protected override void Update(GameTime gameTime) { float timePassed = (float)gameTime.ElapsedGameTime.TotalSeconds; MouseState ms = Mouse.GetState(); Vector2 MousePosition = new Vector2(ms.X, ms.Y); Direction = ScreenCenter - MousePosition; if (Direction != Vector2.Zero) { Direction.Normalize(); } x += (int)(Direction.X * z * timePassed); y += (int)(Direction.Y * z * timePassed); //No rotation = texture scrolls as intended, With rotation = texture no longer scrolls in the direction of the mouse. My update method needs to somehow compensate for this. //rotation += 0.01f; base.Update(gameTime); } protected override void Draw(GameTime gameTime) { spriteBatch.Begin(SpriteSortMode.Deferred, null, SamplerState.LinearWrap, null, null); spriteBatch.Draw(RotatingBackground, ScreenCenter, new Rectangle(x, y, RotatingBackground.Width, RotatingBackground.Height), color, rotation, Origin, scale, effects, layerDepth); spriteBatch.Draw(Overlay, Vector2.Zero, Color.White); spriteBatch.End(); base.Draw(gameTime); } }

  Read the article

• Opensource package for securly allowing users to log in and provide information

  - by JTS

  I have a site written in mostly php and html. I also have a sql database of personal information like names and addresses. I would like my users to be able to log in to my website with a login I can email or snail mail to them, and view and edit their information on my database. Users can currently enter information online I and store it in my database but they can't view or edit stored information. I can add the code to do this, but when I give users the ability to view information I suddenly have a lot more security concerns. Is there an open source package to deal with allowing users to do something like this? Or is there an established convention for this? I know this is a pretty basic question, and there might be some good literature about it that I have yet to find, so if someone can just point me in the direction of some of that information, or better yet give me firsthand some information about this that would be great.

  Read the article

• Cannot open root device xvda1 or unknown-block(0,0)

  - by svoop

  I'm putting together a Dom0 and three DomU (all Gentoo) with kernel 3.5.7 and Xen 4.1.1. Each Dom has it's own md (md0 for Dom0, md1 for Dom1 etc). Dom0 works fine so far, however, I'm stuck trying to create DomUs. It appears the xvda1 device on DomU is not created or accessible: Parsing config file dom1 domainbuilder: detail: xc_dom_allocate: cmdline="root=/dev/xvda1 console=hvc0 root=/dev/xvda1 ro 3", features="(null)" domainbuilder: detail: xc_dom_kernel_mem: called domainbuilder: detail: xc_dom_boot_xen_init: ver 4.1, caps xen-3.0-x86_64 xen-3.0-x86_32p hvm-3.0-x86_32 hvm-3.0-x86_32p hvm-3.0-x86_64 domainbuilder: detail: xc_dom_parse_image: called domainbuilder: detail: xc_dom_find_loader: trying multiboot-binary loader ... domainbuilder: detail: loader probe failed domainbuilder: detail: xc_dom_find_loader: trying Linux bzImage loader ... domainbuilder: detail: xc_dom_malloc : 10530 kB domainbuilder: detail: xc_dom_do_gunzip: unzip ok, 0x2f7a4f -> 0xa48888 domainbuilder: detail: loader probe OK xc: detail: elf_parse_binary: phdr: paddr=0x1000000 memsz=0x558000 xc: detail: elf_parse_binary: phdr: paddr=0x1558000 memsz=0x690e8 xc: detail: elf_parse_binary: phdr: paddr=0x15c2000 memsz=0x127c0 xc: detail: elf_parse_binary: phdr: paddr=0x15d5000 memsz=0x533000 xc: detail: elf_parse_binary: memory: 0x1000000 -> 0x1b08000 xc: detail: elf_xen_parse_note: GUEST_OS = "linux" xc: detail: elf_xen_parse_note: GUEST_VERSION = "2.6" xc: detail: elf_xen_parse_note: XEN_VERSION = "xen-3.0" xc: detail: elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000 xc: detail: elf_xen_parse_note: ENTRY = 0xffffffff815d5210 xc: detail: elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff81001000 xc: detail: elf_xen_parse_note: FEATURES = "!writable_page_tables|pae_pgdir_above_4gb" xc: detail: elf_xen_parse_note: PAE_MODE = "yes" xc: detail: elf_xen_parse_note: LOADER = "generic" xc: detail: elf_xen_parse_note: unknown xen elf note (0xd) xc: detail: elf_xen_parse_note: SUSPEND_CANCEL = 0x1 xc: detail: elf_xen_parse_note: HV_START_LOW = 0xffff800000000000 xc: detail: elf_xen_parse_note: PADDR_OFFSET = 0x0 xc: detail: elf_xen_addr_calc_check: addresses: xc: detail: virt_base = 0xffffffff80000000 xc: detail: elf_paddr_offset = 0x0 xc: detail: virt_offset = 0xffffffff80000000 xc: detail: virt_kstart = 0xffffffff81000000 xc: detail: virt_kend = 0xffffffff81b08000 xc: detail: virt_entry = 0xffffffff815d5210 xc: detail: p2m_base = 0xffffffffffffffff domainbuilder: detail: xc_dom_parse_elf_kernel: xen-3.0-x86_64: 0xffffffff81000000 -> 0xffffffff81b08000 domainbuilder: detail: xc_dom_mem_init: mem 5000 MB, pages 0x138800 pages, 4k each domainbuilder: detail: xc_dom_mem_init: 0x138800 pages domainbuilder: detail: xc_dom_boot_mem_init: called domainbuilder: detail: x86_compat: guest xen-3.0-x86_64, address size 64 domainbuilder: detail: xc_dom_malloc : 10000 kB domainbuilder: detail: xc_dom_build_image: called domainbuilder: detail: xc_dom_alloc_segment: kernel : 0xffffffff81000000 -> 0xffffffff81b08000 (pfn 0x1000 + 0xb08 pages) domainbuilder: detail: xc_dom_pfn_to_ptr: domU mapping: pfn 0x1000+0xb08 at 0x7fdec9b85000 xc: detail: elf_load_binary: phdr 0 at 0x0x7fdec9b85000 -> 0x0x7fdeca0dd000 xc: detail: elf_load_binary: phdr 1 at 0x0x7fdeca0dd000 -> 0x0x7fdeca1460e8 xc: detail: elf_load_binary: phdr 2 at 0x0x7fdeca147000 -> 0x0x7fdeca1597c0 xc: detail: elf_load_binary: phdr 3 at 0x0x7fdeca15a000 -> 0x0x7fdeca1cd000 domainbuilder: detail: xc_dom_alloc_segment: phys2mach : 0xffffffff81b08000 -> 0xffffffff824cc000 (pfn 0x1b08 + 0x9c4 pages) domainbuilder: detail: xc_dom_pfn_to_ptr: domU mapping: pfn 0x1b08+0x9c4 at 0x7fdec91c1000 domainbuilder: detail: xc_dom_alloc_page : start info : 0xffffffff824cc000 (pfn 0x24cc) domainbuilder: detail: xc_dom_alloc_page : xenstore : 0xffffffff824cd000 (pfn 0x24cd) domainbuilder: detail: xc_dom_alloc_page : console : 0xffffffff824ce000 (pfn 0x24ce) domainbuilder: detail: nr_page_tables: 0x0000ffffffffffff/48: 0xffff000000000000 -> 0xffffffffffffffff, 1 table(s) domainbuilder: detail: nr_page_tables: 0x0000007fffffffff/39: 0xffffff8000000000 -> 0xffffffffffffffff, 1 table(s) domainbuilder: detail: nr_page_tables: 0x000000003fffffff/30: 0xffffffff80000000 -> 0xffffffffbfffffff, 1 table(s) domainbuilder: detail: nr_page_tables: 0x00000000001fffff/21: 0xffffffff80000000 -> 0xffffffff827fffff, 20 table(s) domainbuilder: detail: xc_dom_alloc_segment: page tables : 0xffffffff824cf000 -> 0xffffffff824e6000 (pfn 0x24cf + 0x17 pages) domainbuilder: detail: xc_dom_pfn_to_ptr: domU mapping: pfn 0x24cf+0x17 at 0x7fdece676000 domainbuilder: detail: xc_dom_alloc_page : boot stack : 0xffffffff824e6000 (pfn 0x24e6) domainbuilder: detail: xc_dom_build_image : virt_alloc_end : 0xffffffff824e7000 domainbuilder: detail: xc_dom_build_image : virt_pgtab_end : 0xffffffff82800000 domainbuilder: detail: xc_dom_boot_image: called domainbuilder: detail: arch_setup_bootearly: doing nothing domainbuilder: detail: xc_dom_compat_check: supported guest type: xen-3.0-x86_64 <= matches domainbuilder: detail: xc_dom_compat_check: supported guest type: xen-3.0-x86_32p domainbuilder: detail: xc_dom_compat_check: supported guest type: hvm-3.0-x86_32 domainbuilder: detail: xc_dom_compat_check: supported guest type: hvm-3.0-x86_32p domainbuilder: detail: xc_dom_compat_check: supported guest type: hvm-3.0-x86_64 domainbuilder: detail: xc_dom_update_guest_p2m: dst 64bit, pages 0x138800 domainbuilder: detail: clear_page: pfn 0x24ce, mfn 0x37ddee domainbuilder: detail: clear_page: pfn 0x24cd, mfn 0x37ddef domainbuilder: detail: xc_dom_pfn_to_ptr: domU mapping: pfn 0x24cc+0x1 at 0x7fdece675000 domainbuilder: detail: start_info_x86_64: called domainbuilder: detail: setup_hypercall_page: vaddr=0xffffffff81001000 pfn=0x1001 domainbuilder: detail: domain builder memory footprint domainbuilder: detail: allocated domainbuilder: detail: malloc : 20658 kB domainbuilder: detail: anon mmap : 0 bytes domainbuilder: detail: mapped domainbuilder: detail: file mmap : 0 bytes domainbuilder: detail: domU mmap : 21392 kB domainbuilder: detail: arch_setup_bootlate: shared_info: pfn 0x0, mfn 0xbaa6f domainbuilder: detail: shared_info_x86_64: called domainbuilder: detail: vcpu_x86_64: called domainbuilder: detail: vcpu_x86_64: cr3: pfn 0x24cf mfn 0x37dded domainbuilder: detail: launch_vm: called, ctxt=0x7fff224e4ea0 domainbuilder: detail: xc_dom_release: called Daemon running with PID 4639 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.5.7-gentoo (root@majordomo) (gcc version 4.5.4 (Gentoo 4.5.4 p1.0, pie-0.4.7) ) #1 SMP Tue Nov 20 10:49:51 CET 2012 [ 0.000000] Command line: root=/dev/xvda1 console=hvc0 root=/dev/xvda1 ro 3 [ 0.000000] ACPI in unprivileged domain disabled [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009ffff] usable [ 0.000000] Xen: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000138ffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] MPS support code is not built-in. [ 0.000000] Using acpi=off or acpi=noirq or pci=noacpi may have problem [ 0.000000] DMI not present or invalid. [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x139000 max_arch_pfn = 0x400000000 [ 0.000000] e820: last_pfn = 0x100000 max_arch_pfn = 0x400000000 [ 0.000000] init_memory_mapping: [mem 0x00000000-0xffffffff] [ 0.000000] init_memory_mapping: [mem 0x100000000-0x138ffffff] [ 0.000000] NUMA turned off [ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000138ffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x138ffffff] [ 0.000000] NODE_DATA [mem 0x1387fc000-0x1387fffff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x138ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009ffff] [ 0.000000] node 0: [mem 0x00100000-0x138ffffff] [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] No local APIC present [ 0.000000] APIC: disable apic facility [ 0.000000] APIC: switched to apic NOOP [ 0.000000] e820: cannot find a gap in the 32bit address range [ 0.000000] e820: PCI devices with unassigned 32bit BARs may break! [ 0.000000] e820: [mem 0x139100000-0x1394fffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.1.1 (preserve-AD) [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff880138400000 s75712 r8192 d22592 u2097152 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1259871 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/xvda1 console=hvc0 root=/dev/xvda1 ro 3 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 4943980k/5128192k available (3937k kernel code, 448k absent, 183764k reserved, 1951k data, 524k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:256 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] console [hvc0] enabled [ 0.000000] installing Xen timer for CPU 0 [ 0.000000] Detected 3411.602 MHz processor. [ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 6823.20 BogoMIPS (lpj=3411602) [ 0.000999] pid_max: default: 32768 minimum: 301 [ 0.000999] Security Framework initialized [ 0.001355] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.002974] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.003441] Mount-cache hash table entries: 256 [ 0.003595] Initializing cgroup subsys cpuacct [ 0.003599] Initializing cgroup subsys freezer [ 0.003637] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.003637] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.003643] CPU: Physical Processor ID: 0 [ 0.003645] CPU: Processor Core ID: 0 [ 0.003702] SMP alternatives: switching to UP code [ 0.011791] Freeing SMP alternatives: 12k freed [ 0.011835] Performance Events: unsupported p6 CPU model 42 no PMU driver, software events only. [ 0.011886] Brought up 1 CPUs [ 0.011998] Grant tables using version 2 layout. [ 0.012009] Grant table initialized [ 0.012034] NET: Registered protocol family 16 [ 0.012328] PCI: setting up Xen PCI frontend stub [ 0.015089] bio: create slab <bio-0> at 0 [ 0.015158] ACPI: Interpreter disabled. [ 0.015180] xen/balloon: Initialising balloon driver. [ 0.015180] xen-balloon: Initialising balloon driver. [ 0.015180] vgaarb: loaded [ 0.016126] SCSI subsystem initialized [ 0.016314] PCI: System does not support PCI [ 0.016320] PCI: System does not support PCI [ 0.016435] NetLabel: Initializing [ 0.016438] NetLabel: domain hash size = 128 [ 0.016440] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.016447] NetLabel: unlabeled traffic allowed by default [ 0.016475] Switching to clocksource xen [ 0.017434] pnp: PnP ACPI: disabled [ 0.017501] NET: Registered protocol family 2 [ 0.017864] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.019322] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.020376] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.020497] TCP: Hash tables configured (established 524288 bind 65536) [ 0.020500] TCP: reno registered [ 0.020525] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.020564] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.020624] NET: Registered protocol family 1 [ 0.020658] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.020662] software IO TLB [mem 0xfb632000-0xff631fff] (64MB) mapped at [ffff8800fb632000-ffff8800ff631fff] [ 0.020750] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 0.021378] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.023378] msgmni has been set to 9656 [ 0.023544] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.023549] io scheduler noop registered [ 0.023551] io scheduler deadline registered [ 0.023580] io scheduler cfq registered (default) [ 0.023650] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.023845] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.024082] Non-volatile memory driver v1.3 [ 0.024085] Linux agpgart interface v0.103 [ 0.024207] Event-channel device installed. [ 0.024265] [drm] Initialized drm 1.1.0 20060810 [ 0.024268] [drm:i915_init] *ERROR* drm/i915 can't work without intel_agp module! [ 0.025145] brd: module loaded [ 0.025565] loop: module loaded [ 0.045646] Initialising Xen virtual ethernet driver. [ 0.198264] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.199096] i8042: No controller found [ 0.199139] mousedev: PS/2 mouse device common for all mice [ 0.259303] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 [ 0.259353] rtc_cmos: probe of rtc_cmos failed with error -38 [ 0.259440] md: raid1 personality registered for level 1 [ 0.259542] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 0.259732] ip_tables: (C) 2000-2006 Netfilter Core Team [ 0.259747] TCP: cubic registered [ 0.259886] NET: Registered protocol family 10 [ 0.260031] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 0.260070] sit: IPv6 over IPv4 tunneling driver [ 0.260194] NET: Registered protocol family 17 [ 0.260213] Bridge firewalling registered [ 5.360075] XENBUS: Waiting for devices to initialise: 25s...20s...15s...10s...5s...0s...235s...230s...225s...220s...215s...210s...205s...200s...195s...190s...185s...180s...175s...170s...165s...160s...155s...150s...145s...140s...135s...130s...125s...120s...115s...110s...105s...100s...95s...90s...85s...80s...75s...70s...65s...60s...55s...50s...45s...40s...35s...30s...25s...20s...15s...10s...5s...0s... [ 270.360180] XENBUS: Timeout connecting to device: device/vbd/51713 (local state 3, remote state 1) [ 270.360273] md: Waiting for all devices to be available before autodetect [ 270.360277] md: If you don't use raid, use raid=noautodetect [ 270.360388] md: Autodetecting RAID arrays. [ 270.360392] md: Scanned 0 and added 0 devices. [ 270.360394] md: autorun ... [ 270.360395] md: ... autorun DONE. [ 270.360431] VFS: Cannot open root device "xvda1" or unknown-block(0,0): error -6 [ 270.360435] Please append a correct "root=" boot option; here are the available partitions: [ 270.360440] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 270.360444] Pid: 1, comm: swapper/0 Not tainted 3.5.7-gentoo #1 [ 270.360446] Call Trace: [ 270.360454] [<ffffffff813d2205>] ? panic+0xbe/0x1c5 [ 270.360459] [<ffffffff813d2358>] ? printk+0x4c/0x51 [ 270.360464] [<ffffffff815d5fb7>] ? mount_block_root+0x24f/0x26d [ 270.360469] [<ffffffff815d62b6>] ? prepare_namespace+0x168/0x192 [ 270.360474] [<ffffffff815d5ca7>] ? kernel_init+0x1b0/0x1c2 [ 270.360477] [<ffffffff815d5500>] ? loglevel+0x34/0x34 [ 270.360482] [<ffffffff813d5a64>] ? kernel_thread_helper+0x4/0x10 [ 270.360486] [<ffffffff813d4038>] ? retint_restore_args+0x5/0x6 [ 270.360490] [<ffffffff813d5a60>] ? gs_change+0x13/0x13 The config: name = "dom1" bootloader = "/usr/bin/pygrub" root = "/dev/xvda1 ro" extra = "3" # runlevel memory = 5000 disk = [ 'phy:/dev/md1,xvda1,w' ] # vif = [ 'ip=..., vifname=veth1' ] # none for now Here are some details on the Dom0 kernel (grepping for "xen"): CONFIG_XEN=y CONFIG_XEN_DOM0=y CONFIG_XEN_PRIVILEGED_GUEST=y CONFIG_XEN_PVHVM=y CONFIG_XEN_MAX_DOMAIN_MEMORY=500 CONFIG_XEN_SAVE_RESTORE=y CONFIG_PCI_XEN=y CONFIG_XEN_PCIDEV_FRONTEND=y # CONFIG_XEN_BLKDEV_FRONTEND is not set CONFIG_XEN_BLKDEV_BACKEND=y # CONFIG_XEN_NETDEV_FRONTEND is not set CONFIG_XEN_NETDEV_BACKEND=y CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y CONFIG_HVC_XEN=y CONFIG_HVC_XEN_FRONTEND=y # CONFIG_XEN_WDT is not set # CONFIG_XEN_FBDEV_FRONTEND is not set # Xen driver support CONFIG_XEN_BALLOON=y # CONFIG_XEN_SELFBALLOONING is not set CONFIG_XEN_SCRUB_PAGES=y CONFIG_XEN_DEV_EVTCHN=y CONFIG_XEN_BACKEND=y CONFIG_XENFS=y CONFIG_XEN_COMPAT_XENFS=y CONFIG_XEN_SYS_HYPERVISOR=y CONFIG_XEN_XENBUS_FRONTEND=y CONFIG_XEN_GNTDEV=m CONFIG_XEN_GRANT_DEV_ALLOC=m CONFIG_SWIOTLB_XEN=y CONFIG_XEN_TMEM=y CONFIG_XEN_PCIDEV_BACKEND=m CONFIG_XEN_PRIVCMD=y CONFIG_XEN_ACPI_PROCESSOR=m And the DomU kernel (grepping for "xen"): CONFIG_XEN=y CONFIG_XEN_DOM0=y CONFIG_XEN_PRIVILEGED_GUEST=y CONFIG_XEN_PVHVM=y CONFIG_XEN_MAX_DOMAIN_MEMORY=500 CONFIG_XEN_SAVE_RESTORE=y CONFIG_PCI_XEN=y CONFIG_XEN_PCIDEV_FRONTEND=y CONFIG_XEN_BLKDEV_FRONTEND=y CONFIG_XEN_NETDEV_FRONTEND=y CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y CONFIG_HVC_XEN=y CONFIG_HVC_XEN_FRONTEND=y # CONFIG_XEN_WDT is not set # CONFIG_XEN_FBDEV_FRONTEND is not set # Xen driver support CONFIG_XEN_BALLOON=y # CONFIG_XEN_SELFBALLOONING is not set CONFIG_XEN_SCRUB_PAGES=y CONFIG_XEN_DEV_EVTCHN=y # CONFIG_XEN_BACKEND is not set CONFIG_XENFS=y CONFIG_XEN_COMPAT_XENFS=y CONFIG_XEN_SYS_HYPERVISOR=y CONFIG_XEN_XENBUS_FRONTEND=y CONFIG_XEN_GNTDEV=m CONFIG_XEN_GRANT_DEV_ALLOC=m CONFIG_SWIOTLB_XEN=y CONFIG_XEN_TMEM=y CONFIG_XEN_PRIVCMD=y CONFIG_XEN_ACPI_PROCESSOR=m Any ideas what I'm doing wrong here? Thanks a lot!

  Read the article

• Use open-source programs in your company?

  - by eversor

  Is there any cons of making your employees use open-source programs in your company? I am planning to start a bussiness and I wonder why companies usually work with proprietary software, as Microsoft Word to quote the most famous one. Why do not they use Open Office (or Libre Office) etc.? From my point of view, you can save a lot of money and help the open-source community by, for instance, giving them part of your benefits in form of donations. I do not know any (medium-big) company that does this. Probably you could give me some examples, just to prove that this model of open-source usage/collaboration works rocks.

  Read the article

• AutoMatically Creating New Sites When New Users Sign Up [closed]

  - by Eddy Freeman

  I would like to know how hosted eCommerce sites like www.shopify.com, www.3dCart.com etc.. automatically creates new sites when new users sign up. What kind of tools do they use to create those sites into the users profile. I have tried googling but couldn't find an answer. Does any of you guys have any knowledge or experience that you can share with me? Or do you know a tutorial that you can point me to? I hope my question is clear. Thanks for your help.

  Read the article

< Previous Page | 323 324 325 326 327 328 329 330 331 332 333 334  | Next Page >