Search Results

Search found 17847 results on 714 pages for 'virtual disk'.

Page 327/714 | < Previous Page | 323 324 325 326 327 328 329 330 331 332 333 334  | Next Page >

• SCVMM 2008 R2 problems migrating VM from VS2005 to Hyper-V host

  - by Scott Ivey

  I have System Center Virtual Machine Manager 2008 R2 installed, and have a Hyper-V R2 host and a Virtual Server 2005 host. I'm trying to migrate my machines from the VS2005 host to the Hyper-V host, and keep getting the following error... VMM is unable to complete the requested file transfer. The connection to the HTTP server myserver.mydomain.local could not be established. (Unknown error (0x80072efd)) Recommended Action Ensure that the HTTP service and/or the agent on the machine myserver.mydomain.local are installed and running and that a firewall is not blocking HTTPS traffic. (Note - migrations between Hyper-V hosts managed by the VMM server work fine - my problem is just going from VS2005-Hyper-V hosts) I have no firewalls turned on on either of the servers, and no firewalls in the middle. I've looked all over for answers to this problem, and am getting nowhere. All the articles I find when searching are talking about either V2V or P2V - and i'm just trying to do a straight migrate VM. I've tried rebooting the boxes, changing the BITS SSL port number, restarting services, triple-checking firewalls, etc. Does anyone have any good suggestions as to how I can resolve this problem?

  Read the article

• Excel techniques for perfmon csv log file analysis

  - by Aszurom

  I have perfmon running against several servers, where I'm outputting to a .csv file data like CPU %time, memory bytes free, hard disk I/O metrics like s/write and writes/s. The ones graphing the SQL servers are also collecting SQL stats. The web servers are collecting .Net relevant stuff. I am aware of PAL, and used it as a template of what data to capture based on server type actually. I just don't think the output it generates is detailed or flexible enough - but it does a pretty remarkable job of parsing logs and making graphs. I'm borderline incompetent with Excel, so I'm hoping to be directed to some knowledge of how to take a perfmon output .csv and mine it in Excel to produce some numbers that are meaningful to me as a sysadmin. I could of course just pick a range of data and assemble a graph out of that and look for spikes and trends, but I'm convinced there is some technique to this that makes it more manageable than looking at a monsterous spreadsheet of numbers and trying to make graphs of it. Plus, it's pretty time consuming and not something I can do as a "take a glance at the servers" sort of routine. I'm graphing CPU, disk use, network b/sec, etc. in Cacti as well, which is nice for seeing big trends. The problem is that it is 5 minute averages, so a server could have a problem but it's intermittent and washes out in a 5 min average. What do you do with perfmon data that I could learn from?

  Read the article

• BAD ARCHIVE MIRROR using PXE BOOT method

  - by omkar

  i m trying to automatically install UBUNTU on a client PC by using the method of PXE BOOT method....my Objectives are below:- i m following the steps given in this link installation using PXE BOOT INSTALL 1:-the server will have a KICKSTART config file which contains the parameters for the OS installation and the files which are required for the OS installations. 2:-the client will have to detect this configuration along with the setup files and complete the installation without any input from the user. In my server i have installed DHCP3-server,Apache2 and TFTP for helping me with the installation. i have nearly achieved my first objective,i m able to boot my client using the files stored in the server,but during the installation stage it is asking me to "CHOOSE A MIRROR of UBUNTU ARCHIVE".i gave the server's IP address and the path in the server where the files are located but then too its giving me error "BAD ARCHIVE MIRROR". so is it possible that instead of downloading all the files from the internet and storing them on my disk , can i use the files which comes with the UBUNTU-CD, and how to store this files in what format (should i zip them ) on the disk. secondly i am also generating the ks.cfg which i wanted to give to the client for automatic installation of the OS ,so how should the configuration file be given to the installation process.

  Read the article

• Lenovo Mini Wireless Keyboard N5901: Remap orange "My Computer" button

  - by Jon Schneider

  I have a Lenovo Mini Wireless Keyboard N5901 (a.k.a. Part No. 57Y6336) that I'm using with an HTPC running Windows 7. The remote comes with an orange button in the top-left corner that by default, when pressed, opens the Windows "My Computer" window. I would like to remap / reprogram this button to act like the green "Windows Media Center" button instead on a Windows Media Center (WMC) remote; that is, open Windows Media Center if it isn't already open, or go to the WMC homepage if WMC is already open. I've tried several keyboard-remapping utilities (as recommended in other, more general "how to remap keyboard key?" SuperUser.com questions) including SharpKeys, Key Mapper, and KeyTweak, with no luck so far. None of these utilities recognize the orange button -- they all do recognize that some key was pressed, but display a value for the key of "unsupported" or something similar. I was able to use a utility called Keyboard Scan Code Generator to determine that a press of the orange button has a KeyData value of 16777217 (0x1000001), and a "Virtual Code" value of 182. (The other "media" buttons on the N5901 have the same KeyData value, but different Virtual Code values). I'm not sure at this point where in Windows this keystroke is being interpreted as a command to open "My Computer." There is no special software / driver for this device; it worked out of the box with Windows 7, no special driver install necessary. Is there any way to accomplish this? Thanks in advance for any suggestions!

  Read the article

• The frame buffer layout of the current display cannot be made to match...

  - by adambox

  I get this error when I have VM running in VMWare Workstation on my work PC and try Remote Desktop-ing in from my iMac at home. I just upgraded VMWare Workstation to 7.0 from 6.0 and now I'm getting it when I try to resume my VM at work. It then asks me the scary question of whether I want to preserve or discard the suspended state. I don't want to lose stuff! ack! Update I backed up my VM and tried hitting that "discard" button and the result was a reboot of the VM. I then tried restoring to a snapshot, and none of my snapshots work! Is there anyway to fix this so I can run 7 but still have my old snapshots? The frame buffer layout of the current display cannot be made to match the frame buffer layout stored in the snapshot. The dimensions of the frame buffer in the snapshot are: Max width 3200, Max height 1770, Max size 22659072. The dimensions of the frame buffer on the current display are: Max width 3200, Max height 1600, Max size 20512768. Error encountered while trying to restore the virtual machine state from file "C:\Documents and Settings\adam\My Documents\My Virtual Machines\dev\Windows XP Professional.vmss". What do I do so I don't break things horribly?

  Read the article

• iSCSI errors continue after removing inaccessible target portal

  - by Ansgar Wiechers

  By mistake I entered an iSCSI target portal address in the iSCSI Initiator on one of our virtual servers that does not have an address in the network range used for iSCSI. This caused the following errors/warnings to appear in the eventlog: Log Name: System Source: MSiSCSI Event ID: 113 Level: Warning Description: iSCSI discovery via SendTargets failed with error code 0xefff0003 to target portal *192.168.23.42 0003260 Root\ISCSIPRT\0000_0 . Log Name: System Source: iScsiPrt Event ID: 1 Level: Error Description: Initiator failed to connect to the target. Target IP address and TCP Port number are given in dump data. Log Name: System Source: iScsiPrt Event ID: 70 Level: Error Description: Error occurred when processing iSCSI logon request. The request was not retried. Error status is given in the dump data. So far that's expected beahvior, so I removed the portal from the iSCSI Initiator as described in MSKB 976072. However, the errors/warnings keep appearing every hour, even though neither iSCSI Initiator GUI nor iscscli show any portals: C:\>iscsicli ListTargetPortals Microsoft iSCSI Initiator Version 6.1 Build 7601 The operation completed successfully. The problem persists after rebooting the server. Uninstalling the Microsoft iSCSI Initiator device via devmgmt.msc as well as changing the Initiator parameters like this: [HKLM\SYSTEM\CurrentControlSet\Control\Class\{4D36E97B-E325-11CE-BFC1-08002BE10318}] "MaxPendingRequests"=dword:00000001 "MaxConnectionRetries"=dword:00000001 "MaxRequestHoldTime"=dword:00000005 didn't help either. Each change was followed by a reboot. Disabling the device does prevent the errors/warnings from re-appearing, of course, but I'd rather not have to resort to this. How can I prevent those errors and warnings from appearing (short of disabling the initiator device or re-installing the server)? What am I missing? Environment: The virtual machine runs on a Hyper-V cluster managed by SCVMM 2012. Hosts and guests run Windows Server 2008 R2 SP1. The physical machines are Dell PowerEdge M710HD blades.

  Read the article

• Have set Expiration time: Still getting "Query string present but no explicit expiration time"

  - by oligofren

  I have one local Apache instance running with mod_cache (+ disk & mem) enabled, and it seems to cache content from my appserver fine. My app server sets Expiration headers and Last-modified. Yet, when deploying on a production server with the same modules enabled, I am getting the following error in my logs: blablabla not cached. Reason: Query string present but no explicit expiration time Any clues on why Apache is not caching content? The only difference is the Apache version. Locally I am running 2.2. This is from my config CacheRoot "/var/cache/apache2/" CacheEnable disk / This is example output < HTTP/1.1 200 OK < Date: Mon, 19 Nov 2012 16:09:13 GMT < Server: Sun GlassFish Enterprise Server v2.1.1 < X-Powered-By: Servlet/2.5 < Expires: Tue Nov 20 05:00:00 CET 2012 < Last-Modified: Mon Nov 19 17:09:13 CET 2012 < Cache-Control: no-transform < Content-Type: application/x-javascript < Transfer-Encoding: chunked

  Read the article

• apache2 VirtualHost in Mac OS X home directory

  - by aaron

  I am running Macports apache2 on Mac OS X 10.5. Whenever I configure a virtual host in the default folder, it works, however when I configure the virtual host in my home directory I get a "403 Forbidden" error. How do I configure a vhost in my home directory? Here is the configuration that yields "403 Forbidden" when I access "devel.mysite.com": /opt/local/apache2/conf/extra/httpd-vhosts.conf: DocumentRoot "/opt/local/apache2/htdocs" ServerName * #CustomLog "" common <VirtualHost *:80> #DocumentRoot "/opt/local/apache2/htdocs/mysite" DocumentRoot "/Users/myuser/Sites/mysite" ServerName devel.mysite.com </VirtualHost> The error message in /opt/local/apache2/logs/devel.mysite.com-error_log: [Sat Apr 17 19:54:49 2010] [error] [client 127.0.0.1] client denied by server configuration: /Users/myuser/Sites/mysite/ When I uncomment the line to make DocumentRoot in /opt/local/apache2/htdocs/mysite, it works: DocumentRoot "/opt/local/apache2/htdocs" ServerName * #CustomLog "" common <VirtualHost *:80> DocumentRoot "/opt/local/apache2/htdocs/mysite" #DocumentRoot "/Users/myuser/Sites" ServerName devel.mysite.com </VirtualHost> I get no errors or warnings when I start apache, and the only thing that is logged on startup is this (in /opt/local/apache/logs/error_log): [Sat Apr 17 19:56:29 2010] [notice] Digest: generating secret for digest authentication ... [Sat Apr 17 19:56:29 2010] [notice] Digest: done [Sat Apr 17 19:56:29 2010] [notice] Apache/2.2.14 (Unix) mod_ssl/2.2.14 OpenSSL/0.9.8m DAV/2 configured -- resuming normal operations A few notes: * The permissions of /Home/myuser/Sites/mysite is 755, owned by myuser, group is staff * Everything else works as expected, until I move the ServerRoot of the vhost to the directory in my home

  Read the article

• Scripting an automated SQLServer 2008 DR move

  - by ItsAMystery

  Hi All We use the built in logshipping in SQLServer to logship to our DR site but once in a month do a DR test which requires us to move back and forth between our Live and BAckup servers. We run multiple (30) databases on the system so manually backing up the final logs and disabling the jobs is too much work and takes too long. I though no problem, I will script it but have run into trouble with it always complaninig that the final logship is too early to apply even though I dont export the final log until putting the database into norecovery mode. Firstly, does any one no a simple and reliable way of doing this? I have lokoed at some 3rd party software (redgate sqlbackup I think it was) but that didnt make it easy in this situation either. What I want to be able to do is basically run a script (a series of stored procedures) to get me to DR and run another to get me back with no dataloss. My scripts are very simplistic at the moment but here they are: 2 servers Primary Paris Secondary ParisT The StartAgentJobAndWait is a script written by someone else (ta) and just checks the jobs have finished or quits it if it never ends. At the moment I am just using a test database called BOB2 but if I can get it working will pass in the database and job names. from PARIS: /* Disable backup job */ exec msdb..sp_update_job @job_name = 'LSBackup_BOB2', @enabled = 0 exec PARIST.msdb..sp_update_job @job_name = 'LSCopy_PARIS_BOB2', @enabled = 0 exec PARIST.msdb..sp_update_job @job_name = 'LSRestore_PARIS_BOB2', @enabled = 0 exec PARIST.master.dbo.DRStage2 ParisT DRStage2 DECLARE @RetValue varchar (10) EXEC @RetValue = StartAgentJobAndWait LSCopy_PARIS_BOB2 , 2 SELECT ReturnValue=@RetValue if @RetValue = 1 begin print 'The Copy Task completed Succesffuly' END ELSE print 'The Copy task failed, This may or may not be a problem, check restore state of database' SELECT @RetValue = 0 EXEC @RetValue = StartAgentJobAndWait LSRestore_PARIS_BOB2 , 2 SELECT ReturnValue=@RetValue if @RetValue = 1 begin print 'The Restore Task completed Succesffuly' END ELSE print 'The Copy task failed, This may or may not be a problem, check restore state of database' exec PARIS.master.dbo.DRStage3 /* Do the last logship and move it to Trumpington */ BACKUP log "BOB2" to disk='c:\drlogshipping\BOB2.bak' with compression, norecovery EXEC xp_cmdshell 'copy c:\drlogshipping \\192.168.7.11\drlogshipping' EXEC PARIST.master.dbo.DRTransferFinish AS BEGIN restore database "BOB2" from disk='c:\drlogshipping\bob2.bak' with recovery

  Read the article

• Postfix mail server: can't connect via POP/IMAP

  - by MelkerOVan

  I've followed this guide on setting up a mail server on my dedicated server. I've been able to send mails from the php application I'm using and the linux commandline (using telnet, php, etc). The problem is that I cannot connect to the server via IMAP/POP which I've setup using Courier. I've tried using thunderbird but it complains that the username or password is wrong. I doubt it is the username/password but I don't know how to trouble shoot this. Edit: Here's the messages in mail.log: Jan 9 22:43:38 mail authdaemond: received auth request, service=imap, authtype=login Jan 9 22:43:38 mail authdaemond: authmysql: trying this module Jan 9 22:43:38 mail authdaemond: SQL query: SELECT id, crypt, "", uid, gid, home, "", "", name, "" FROM users WHERE id = '[email protected]' AND (enabled=1) Jan 9 22:43:38 mail authdaemond: password matches successfully Jan 9 22:43:38 mail authdaemond: authmysql: sysusername=<null>, sysuserid=5000, sysgroupid=5000, homedir=/var/spool/mail/virtual, [email protected], fullname=peter, maildir=<null>, quota=<null>, options=<null> Jan 9 22:43:38 mail authdaemond: authmysql: clearpasswd=<null>, passwd=6SrBcYq65l8QU Jan 9 22:43:38 mail authdaemond: Authenticated: sysusername=<null>, sysuserid=5000, sysgroupid=5000, homedir=/var/spool/mail/virtual, [email protected], fullname=peter, maildir=<null>, quota=<null>, options=<null> Jan 9 22:43:38 mail authdaemond: Authenticated: clearpasswd=peter, passwd=6SrBcYq65l8QU Jan 9 22:43:38 mail imapd: chdir Maildir: No such file or directory

  Read the article

• How can we configure the Bitnami Joomla stack to open a socket on startup?

  - by bobo

  I have deployed the Bitnami Ubuntu Joomla! 3.1.5-2 (64-bit) stack on Amazon Cloud: http://bitnami.com/stack/joomla/cloud/amazon By default, the stack is configured to run PHP using PHP-FPM. I have no problem getting the Joomla and phpmyadmin running as virtual hosts on Apache. But now, I would like to add another virtual host. The problem I am having is, I have no idea how to get the system creating a socket on startup in the following folder: bitnami@ip-172-31-15-99:/opt/bitnami/php/var/run$ ls -al total 12 drwxr-xr-x 2 root root 4096 Nov 3 20:43 . drwxr-xr-x 4 root root 4096 Oct 9 15:39 .. srw-rw-rw- 1 root root 0 Nov 3 20:43 joomla.sock -rw-r--r-- 1 root root 4 Nov 3 20:43 php5-fpm.pid srw-rw-rw- 1 root root 0 Nov 3 20:43 phpmyadmin.sock srw-rw-rw- 1 root root 0 Nov 3 20:43 www.sock bitnami@ip-172-31-15-99:/opt/bitnami/php/var/run$ I have the following /opt/bitnami/apps/mywebsite/conf/php-fpm/pool.conf file: [mywebsite] listen=/opt/bitnami/php/var/run/mywebsite.sock include=/opt/bitnami/php/etc/common-dynamic.conf include=/opt/bitnami/apps/mywebsite/conf/php-fpm/php-settings.conf pm=dynamic As it can be seen, listen points to the mywebsite.sock which does not currently exist. I did an experiment, by removing the .sock files in the /opt/bitnami/php/var/run folder and they would come back on reboot. So how can we configure it to open a socket for mywebsite on startup?

  Read the article

• cPanel web servers mounting home partition to a NAS or SAN

  - by Scott

  Hello, I currently have 2 cPanel web servers that are little 1RU dual cpu quad core xeons. They have a lot of resources for processing and handling web requests, and never exceed more than 10% cpu usage. They also have plenty of RAM. The problem is though that they both have RAID 1 160Gb SAS hard disk drives in them that are 75% full, and growing by the day. I didnt think that the amount of disk usage would be so high, but due to the nature of the sites hosted, this has become an issue. The easy fix would be just to upgrade the hard drives to something bigger (probably not of the SAS variety), but I am thinking of keeping the current machines as "processing servers" and buying a central "storage server" with about 12TB of storage. The /home/ partition on each of the 1RU servers would be mounted to a NAS or SAN point on this central storage server. My questions are: - Has anyone got a cPanel setup where they mount /home/ to a NAS or SAN elsewhere? If so, can you provide details as to what you did and how it went :) - Any recommendations on networking? Is gigabit ethernet enough? Is TCP/IP going to be a noticable performance problem? Anyone used a TOE key? - Anyone benchmarked or had any performance issues with SAN over NAS? Any help greatly appreciated. Scott

  Read the article

• MacBook Pro 13" Install DVD Wont Start

  - by Belliez

  Hi, Excuse such a basic question... I am a Laptop Fixer and deal with Windows based laptops only but very recently took in a 13" MacBook Pro for a re-install of the OS (easy I thought!) I inserted the Install DVD, held the C button and turn on. I could hear the disk spinning up and after about a min the DVD is ejected. There are a few scratches on the DVD but should be ok as not that deep. However, Windows Vista was installed (it failed to install properly hence the re-install of Mac OS). Should I wipe clean and format the hard disk first? Could this be the reason the DVD is ejected? Any advice would be gratefully accepted? p.s. never held a MacBook Pro before... first impressions, wow... alu casing and massive touch pad... and the magnetic power socket.... so impressed and it doesn't even work!

  Read the article

• Blank Icon in Control Panel?

  - by Wesley

  Hi all, Just recently I opened my Control Panel and saw that a blank icon came up before my list of icons. Has anyone else experienced this before? Would it be safe to delete it? Thanks in advance. EDIT: Oops, I should have mentioned this too, but when I try creating a shortcut on the desktop, I get a dialog box saying "Windows could not create the shortcut. Check if the disk is full." Clearly it isn't, since I still have 102 GB of free hard disk space... any ideas? EDIT2: Here is a screenie of my complete Control Panel: EDIT3: *So I did a manual search for .CPL in Windows Search and then looked at the list in TweakUI and got 3 unmatched .CPL files. They are [ncpa.CPL], [sapi.CPL], and [QuickTime.CPL]. I clearly know the QuickTime one, but not too sure about the rest. SCRATCH THAT, I FIGURED IT OUT... BUT IT'S NOT THE BLANK ICON.

  Read the article

• Can compressing Program Files save space *and* give a significant boost to SSD performance?

  - by Christopher Galpin

  Considering solid-state disk space is still an expensive resource, compressing large folders has appeal. Thanks to VirtualStore, could Program Files be a case where it might even improve performance? Discovery In particular I have been reading: SSD and NTFS Compression Speed Increase? Does NTFS compression slow SSD/flash performance? Will somebody benchmark whole disk compression (HD,SSD) please? (may have to scroll up) The first link is particularly dreamy, but maybe head a little too far in the clouds. The third link has this sexy semi-log graph (logarithmic scale!). Quote (with notes): Using highly compressable data (IOmeter), you get at most a 30x performance increase [for reads], and at least a 49x performance DECREASE [for writes]. Assuming I interpreted and clarified that sentence correctly, this single user's benchmark has me incredibly interested. Although write performance tanks wretchedly, read performance still soars. It gave me an idea. Idea: VirtualStore It so happens that thanks to sanity saving security features introduced in Windows Vista, write access to certain folders such as Program Files is virtualized for non-administrator processes. Which means, in normal (non-elevated) usage, a program or game's attempt to write data to its install location in Program Files (which is perhaps a poor location) is redirected to %UserProfile%\AppData\Local\VirtualStore, somewhere entirely different. Thus, to my understanding, writes to Program Files should primarily only occur when installing an application. This makes compressing it not only a huge source of space gain, but also a potential candidate for performance gain. Testing The beginning of this post has me a bit timid, it suggests benchmarking NTFS compression on a whole drive is difficult because turning it off "doesn't decompress the objects". However it seems to me the compact command is perfectly capable of doing so for both drives and individual folders. Could it be only marking them for decompression the next time the OS reads from them? I need to find the answer before I begin my own testing.

  Read the article

• PXE with WDS & Windows Server 2012 - no filename option in DHCP lease?

  - by user1799

  I'm trying to configure Windows Server 2012 (a virtual box VM) with WDS so I can PXE boot some Windows 7 VMs (also virtual box). All the machines involved are only attached to the "host only network", 192.168.56.0/24. The Server 2012 machine has been setup as an AD DS machine, has DNS installed and working along with DHCP with option 60 - PXEClient - set and WDS is set to not listen on DHCP ports. I've followed http://technet.microsoft.com/en-us/library/jj648426.aspx very closely. I've used the boot.wim and install.wim files from the Win 7 installation DVD and they're configured as 'boot' and 'installation' images respectively. When I boot the target machine, it gets an IP address, but I simply get 'no filename' and the boot won't proceed any further. I've tried setting option 66 to 192.168.56.2 (the WDS server) and option 67 to both Boot\x64\wdsnbp.com and Boot\x64\pxeboot.n12 but all to no avail. I can't seem to see anything in the event log, either. Can anyone out there spot what I'm doing wrong? Or give tips to narrow down a diagnostic?

  Read the article

• Recover files from corrupt filesystem

  - by Emile 81

  My situation: I have an older 80GB IDE internal hdd, with a few files on that I would like very much to recover: some word documents some latex documents (text files) and pictures (png, jpg, eps files) some other text documents and visual studio project files I had backed them (not the latex ones though) up using svn, but have not committed lately, and would loose a lot of work if I cant recover. the hdd seems to have lost its filesystem, i have no idea how it came about. I know it has/had 3 NTFS partitions, i know the files i want are on the second or third partition. I read http://superuser.com/questions/81877/recover-hard-disk-data Partition Find and Mount did not see all the partitions using intelligent scan TestDisk does (i think), I followed the step by step instructions here, but when I try to list the files it says: "Can't open filesystem, filesystem seems damaged." I'm not sure how to proceed here, as TestDisks wiki does not contain this error message afaik. I don't know if the hdd is gonna fail, or some prog has caused the filesystem to be corrupt, the hdd doesnt make a sound, so i guess that's good. I would like some guidance so I don't accidentally cause more damage. (eg. is it ok to let testdisk write the filesystem to disk? I'm pretty the partitions are listed ok, but not 100%)

  Read the article

• Cisco 891w multiple VLAN configuration

  - by Jessica

  I'm having trouble getting my guest network up. I have VLAN 1 that contains all our network resources (servers, desktops, printers, etc). I have the wireless configured to use VLAN1 but authenticate with wpa2 enterprise. The guest network I just wanted to be open or configured with a simple WPA2 personal password on it's own VLAN2. I've looked at tons of documentation and it should be working but I can't even authenticate on the guest network! I've posted this on cisco's support forum a week ago but no one has really responded. I could really use some help. So if anyone could take a look at the configurations I posted and steer me in the right direction I would be extremely grateful. Thank you! version 15.0 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname ESI ! boot-start-marker boot-end-marker ! logging buffered 51200 warnings ! aaa new-model ! ! aaa authentication login userauthen local aaa authorization network groupauthor local ! ! ! ! ! aaa session-id common ! ! ! clock timezone EST -5 clock summer-time EDT recurring service-module wlan-ap 0 bootimage autonomous ! crypto pki trustpoint TP-self-signed-3369945891 enrollment selfsigned subject-name cn=IOS-Self-Signed-Certificate-3369945891 revocation-check none rsakeypair TP-self-signed-3369945891 ! ! crypto pki certificate chain TP-self-signed-3369945891 certificate self-signed 01 (cert is here) quit ip source-route ! ! ip dhcp excluded-address 192.168.1.1 ip dhcp excluded-address 192.168.1.5 ip dhcp excluded-address 192.168.1.2 ip dhcp excluded-address 192.168.1.200 192.168.1.210 ip dhcp excluded-address 192.168.1.6 ip dhcp excluded-address 192.168.1.8 ip dhcp excluded-address 192.168.3.1 ! ip dhcp pool ccp-pool import all network 192.168.1.0 255.255.255.0 default-router 192.168.1.1 dns-server 10.171.12.5 10.171.12.37 lease 0 2 ! ip dhcp pool guest import all network 192.168.3.0 255.255.255.0 default-router 192.168.3.1 dns-server 10.171.12.5 10.171.12.37 ! ! ip cef no ip domain lookup no ipv6 cef ! ! multilink bundle-name authenticated license udi pid CISCO891W-AGN-A-K9 sn FTX153085WL ! ! username ESIadmin privilege 15 secret 5 $1$g1..$JSZ0qxljZAgJJIk/anDu51 username user1 password 0 pass ! ! ! class-map type inspect match-any ccp-cls-insp-traffic match protocol cuseeme match protocol dns match protocol ftp match protocol h323 match protocol https match protocol icmp match protocol imap match protocol pop3 match protocol netshow match protocol shell match protocol realmedia match protocol rtsp match protocol smtp match protocol sql-net match protocol streamworks match protocol tftp match protocol vdolive match protocol tcp match protocol udp class-map type inspect match-all ccp-insp-traffic match class-map ccp-cls-insp-traffic class-map type inspect match-any ccp-cls-icmp-access match protocol icmp class-map type inspect match-all ccp-invalid-src match access-group 100 class-map type inspect match-all ccp-icmp-access match class-map ccp-cls-icmp-access class-map type inspect match-all ccp-protocol-http match protocol http ! ! policy-map type inspect ccp-permit-icmpreply class type inspect ccp-icmp-access inspect class class-default pass policy-map type inspect ccp-inspect class type inspect ccp-invalid-src drop log class type inspect ccp-protocol-http inspect class type inspect ccp-insp-traffic inspect class class-default drop policy-map type inspect ccp-permit class class-default drop ! zone security out-zone zone security in-zone zone-pair security ccp-zp-self-out source self destination out-zone service-policy type inspect ccp-permit-icmpreply zone-pair security ccp-zp-in-out source in-zone destination out-zone service-policy type inspect ccp-inspect zone-pair security ccp-zp-out-self source out-zone destination self service-policy type inspect ccp-permit ! ! crypto isakmp policy 1 encr 3des authentication pre-share group 2 ! crypto isakmp client configuration group 3000client key 67Nif8LLmqP_ dns 10.171.12.37 10.171.12.5 pool dynpool acl 101 ! ! crypto ipsec transform-set myset esp-3des esp-sha-hmac ! crypto dynamic-map dynmap 10 set transform-set myset ! ! crypto map clientmap client authentication list userauthen crypto map clientmap isakmp authorization list groupauthor crypto map clientmap client configuration address initiate crypto map clientmap client configuration address respond crypto map clientmap 10 ipsec-isakmp dynamic dynmap ! ! ! ! ! interface FastEthernet0 ! ! interface FastEthernet1 ! ! interface FastEthernet2 ! ! interface FastEthernet3 ! ! interface FastEthernet4 ! ! interface FastEthernet5 ! ! interface FastEthernet6 ! ! interface FastEthernet7 ! ! interface FastEthernet8 ip address dhcp ip nat outside ip virtual-reassembly duplex auto speed auto ! ! interface GigabitEthernet0 description $FW_OUTSIDE$$ES_WAN$ ip address 10...* 255.255.254.0 ip nat outside ip virtual-reassembly zone-member security out-zone duplex auto speed auto crypto map clientmap ! ! interface wlan-ap0 description Service module interface to manage the embedded AP ip unnumbered Vlan1 arp timeout 0 ! ! interface Wlan-GigabitEthernet0 description Internal switch interface connecting to the embedded AP switchport trunk allowed vlan 1-3,1002-1005 switchport mode trunk ! ! interface Vlan1 description $ETH-SW-LAUNCH$$INTF-INFO-FE 1$$FW_INSIDE$ ip address 192.168.1.1 255.255.255.0 ip nat inside ip virtual-reassembly zone-member security in-zone ip tcp adjust-mss 1452 crypto map clientmap ! ! interface Vlan2 description guest ip address 192.168.3.1 255.255.255.0 ip access-group 120 in ip nat inside ip virtual-reassembly zone-member security in-zone ! ! interface Async1 no ip address encapsulation slip ! ! ip local pool dynpool 192.168.1.200 192.168.1.210 ip forward-protocol nd ip http server ip http access-class 23 ip http authentication local ip http secure-server ip http timeout-policy idle 60 life 86400 requests 10000 ! ! ip dns server ip nat inside source list 23 interface GigabitEthernet0 overload ip route 0.0.0.0 0.0.0.0 10.165.0.1 ! access-list 23 permit 192.168.1.0 0.0.0.255 access-list 100 remark CCP_ACL Category=128 access-list 100 permit ip host 255.255.255.255 any access-list 100 permit ip 127.0.0.0 0.255.255.255 any access-list 100 permit ip 10.165.0.0 0.0.1.255 any access-list 110 permit ip 192.168.0.0 0.0.5.255 any access-list 120 remark ESIGuest Restriction no cdp run ! ! ! ! ! ! control-plane ! ! alias exec dot11radio service-module wlan-ap 0 session Access point version 12.4 no service pad service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname ESIRouter ! no logging console enable secret 5 $1$yEH5$CxI5.9ypCBa6kXrUnSuvp1 ! aaa new-model ! ! aaa group server radius rad_eap server 192.168.1.5 auth-port 1812 acct-port 1813 ! aaa group server radius rad_acct server 192.168.1.5 auth-port 1812 acct-port 1813 ! aaa authentication login eap_methods group rad_eap aaa authentication enable default line enable aaa authorization exec default local aaa authorization commands 15 default local aaa accounting network acct_methods start-stop group rad_acct ! aaa session-id common clock timezone EST -5 clock summer-time EDT recurring ip domain name ESI ! ! dot11 syslog dot11 vlan-name one vlan 1 dot11 vlan-name two vlan 2 ! dot11 ssid one vlan 1 authentication open eap eap_methods authentication network-eap eap_methods authentication key-management wpa version 2 accounting rad_acct ! dot11 ssid two vlan 2 authentication open guest-mode ! dot11 network-map ! ! username ESIadmin privilege 15 secret 5 $1$p02C$WVHr5yKtRtQxuFxPU8NOx. ! ! bridge irb ! ! interface Dot11Radio0 no ip address no ip route-cache ! encryption vlan 1 mode ciphers aes-ccm ! broadcast-key vlan 1 change 30 ! ! ssid one ! ssid two ! antenna gain 0 station-role root ! interface Dot11Radio0.1 encapsulation dot1Q 1 native no ip route-cache bridge-group 1 bridge-group 1 subscriber-loop-control bridge-group 1 block-unknown-source no bridge-group 1 source-learning no bridge-group 1 unicast-flooding bridge-group 1 spanning-disabled ! interface Dot11Radio0.2 encapsulation dot1Q 2 no ip route-cache bridge-group 2 bridge-group 2 subscriber-loop-control bridge-group 2 block-unknown-source no bridge-group 2 source-learning no bridge-group 2 unicast-flooding bridge-group 2 spanning-disabled ! interface Dot11Radio1 no ip address no ip route-cache shutdown ! encryption vlan 1 mode ciphers aes-ccm ! broadcast-key vlan 1 change 30 ! ! ssid one ! antenna gain 0 dfs band 3 block channel dfs station-role root ! interface Dot11Radio1.1 encapsulation dot1Q 1 native no ip route-cache bridge-group 1 bridge-group 1 subscriber-loop-control bridge-group 1 block-unknown-source no bridge-group 1 source-learning no bridge-group 1 unicast-flooding bridge-group 1 spanning-disabled ! interface GigabitEthernet0 description the embedded AP GigabitEthernet 0 is an internal interface connecting AP with the host router no ip address no ip route-cache ! interface GigabitEthernet0.1 encapsulation dot1Q 1 native no ip route-cache bridge-group 1 no bridge-group 1 source-learning bridge-group 1 spanning-disabled ! interface GigabitEthernet0.2 encapsulation dot1Q 2 no ip route-cache bridge-group 2 no bridge-group 2 source-learning bridge-group 2 spanning-disabled ! interface BVI1 ip address 192.168.1.2 255.255.255.0 no ip route-cache ! ip http server no ip http secure-server ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag access-list 10 permit 192.168.1.0 0.0.0.255 radius-server host 192.168.1.5 auth-port 1812 acct-port 1813 key ***** bridge 1 route ip

  Read the article

• Dell Poweredge 2600 RAID Transfer How-to

  - by DCookie

  Help, please! Hardware: Dell Poweredge 2600 PERC 4 SCSI Drives, 1 standalone 3 in a RAID 5 configuration OS: Windows 2000 Server In other words, a fairly old system. Anyway, we are in the process of taking over support for this site. The current tech wants out and is fading from view fast, so we need to solve this problem: The standalone disk (where the OS was) failed. We've replaced the disk, installed the OS, but need to know exactly how to proceed from here. I've never worked with a RAID system before, so I don't want to touch anything without knowing what I'm doing. We are not certain if the site will want us to attempt to recover the array or wait for the old tech to become available. We have replaced the server with a temporary box, and recovered MOST of the data from an online backup service. However, the other tech failed to backup a part of the data and the only copy of it is on this RAID array. Hence, our caution. We have poked minimally around in the boot-up PERC config utility, and it seems to me that that's where we'll need to be to reclaim the array. Another possibility is that there is some Dell software for the RAID controller we need to acquire. Can anyone provide clues as to how to proceed from here? Any help GREATLY appreciated.

  Read the article

• fsck on LVM snapshots

  - by Alpha01

  I'm trying to do some file system checks using LVM snapshots of our Logical Volumes to see if any of them have dirty file systems. The problem that I have is that our LVM only has one Volume Group with no available space. I was able to do fsck's on some of the logical volumes using a loopback file system. However my question is, is it possible to create a 200GB loopback file system, and saved it on the same partition/logical volume that I'll be taking a snapshot of? Is LVM smart enough to not take a snapshot copy of the actual snapshot? [root@server z]# vgdisplay --- Volume group --- VG Name Web2-Vol System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 29 VG Access read/write VG Status resizable MAX LV 0 Cur LV 6 Open LV 6 Max PV 0 Cur PV 1 Act PV 1 VG Size 544.73 GB PE Size 4.00 MB Total PE 139450 Alloc PE / Size 139450 / 544.73 GB Free PE / Size 0 / 0 VG UUID BrVwNz-h1IO-ZETA-MeIf-1yq7-fHpn-fwMTcV [root@server z]# df -h Filesystem Size Used Avail Use% Mounted on /dev/sda2 9.7G 3.6G 5.6G 40% / /dev/sda1 251M 29M 210M 12% /boot /dev/mapper/Web2--Vol-var 12G 1.1G 11G 10% /var /dev/mapper/Web2--Vol-var--spool 12G 184M 12G 2% /var/spool /dev/mapper/Web2--Vol-var--lib--mysql 30G 15G 14G 52% /var/lib/mysql /dev/mapper/Web2--Vol-usr 13G 3.3G 8.9G 27% /usr /dev/mapper/Web2--Vol-z 468G 197G 267G 43% /z /dev/mapper/Web2--Vol-tmp 3.0G 76M 2.8G 3% /tmp tmpfs 7.9G 92K 7.9G 1% /dev/shm The logical volume in question is /dev/mapper/Web2--Vol-z. I'm afraid if I created the loopback file system in /dev/mapper/Web2--Vol-z and take a snapshot of it, the disk size will be trippled in size, thus running out of disk space available.

  Read the article

• Last (I think and hope) problems configuring SSL certificate with Apache and VirtualHosts

  - by user65567

  Finally I set apache2 to get a single certificate for all subdomains. [...] # Go ahead and accept connections for these vhosts # from non-SNI clients SSLStrictSNIVHostCheck off # Apache setup which will listen for and accept SSL connections on port 443. Listen 443 # Listen for virtual host requests on all IP addresses NameVirtualHost *:443 # Because this virtual host is defined first, it will # be used as the default if the hostname is not received # in the SSL handshake, e.g. if the browser doesn't support # SNI. <VirtualHost *:443> ServerName domain.localhost DocumentRoot "/Users/<my_user_name>/Sites/domain/public" <Directory "/Users/<my_user_name>/Sites/domain/public"> Order allow,deny Allow from all </Directory> # SSL Configuration SSLEngine on ... </VirtualHost> <VirtualHost *:443> ServerName subdomain1.domain.localhost DocumentRoot "/Users/<my_user_name>/Sites/subdomain1/public" <Directory "/Users/<my_user_name>/Sites/subdomain1/public"> Order allow,deny Allow from all </Directory> # SSL Configuration SSLEngine on ... </VirtualHost> <VirtualHost *:443> ServerName subdomain2.domain.localhost DocumentRoot "/Users/<my_user_name>/Sites/subdomain2/public" <Directory "/Users/<my_user_name>/Sites/subdomain2/public"> Order allow,deny Allow from all </Directory> # SSL Configuration SSLEngine on ... </VirtualHost> So, for example, I can correctly access https://subdomain1.domain.localhost https://subdomain2.domain.localhost ... Now, anyway, I have problems on accessing http://subdomain1.domain.localhost http://subdomain2.domain.localhost ... Since I use a Mac Os, on accessing the "http: version", I get a default page "Your website." (instead of a error). Why does it happen?

  Read the article

• SCVMM 2008 R2 problems migrating VM from VS2005 to Hyper-V host

  - by Scott Ivey

  I have System Center Virtual Machine Manager 2008 R2 installed, and have a Hyper-V R2 host and a Virtual Server 2005 host. I'm trying to migrate my machines from the VS2005 host to the Hyper-V host, and keep getting the following error... VMM is unable to complete the requested file transfer. The connection to the HTTP server myserver.mydomain.local could not be established. (Unknown error (0x80072efd)) Recommended Action Ensure that the HTTP service and/or the agent on the machine myserver.mydomain.local are installed and running and that a firewall is not blocking HTTPS traffic. (Note - migrations between Hyper-V hosts managed by the VMM server work fine - my problem is just going from VS2005-Hyper-V hosts) I have no firewalls turned on on either of the servers, and no firewalls in the middle. I've looked all over for answers to this problem, and am getting nowhere. All the articles I find when searching are talking about either V2V or P2V - and i'm just trying to do a straight migrate VM. I've tried rebooting the boxes, changing the BITS SSL port number, restarting services, triple-checking firewalls, etc. Does anyone have any good suggestions as to how I can resolve this problem?

  Read the article

• Ubuntu NBR karmic boot freezes at fsck from util-linux-ng 2.16

  - by BlueBill

  Hi all, I have a netbook (emachine e250 - equivalent to an acer aspire one) and I have Ubunutu NBR 9.10 installed on it. Every other cold boot freezes at the following error message: "fsck from util-linux-ng 2.16" There is no disk activity, no activity what so ever. I have left the machine sit for over an hour and nothing. It takes a couple of hard resets to be able to boot properly. Once it boots everything works great (wireless, suspend/resume, etc.)! I have spent the last couple of weeks researching the problem and the only thing that seems to work is setting nolapic in the boot string in grub - it boots every time. Unfortunately, nolapic disables the second core and causes problems with suspend resume. At first I thought it was an fsck problem with the first partition on the hard disk as it is a hidden ntfs partition containing the windows xp recover information. So in /etc/fstab I set the partition so that it would be ignored by fsck. This didn't seem to do anything. I have these partitions: /dev/sda1 - an ntfs recovery partition /dev/sda2 - /boot /dev/sda3 - swap /dev/sda5 - / /dev/sda6 - /home I am running kernel version 2.6.31-19-generic and have all the patches (as indicated by update manager). I also have no splash screen so I can see the boot progress. I have only been using NBR since January, I have been using Ubuntu on my desktop since last June (2009-06). What logs should I be looking at? Is there a log for failed boots? Thanks, Troy

  Read the article

• ipvsadm lists a few hosts by IP only, rest by name

  - by dmourati

  We use keepalived to manage our Linux Virtual Server (LVS) load balancer. The LVS VIPs are setup to use a FWMARK as configured in iptables. virtual_server fwmark 300000 { delay_loop 10 lb_algo wrr lb_kind NAT persistence_timeout 180 protocol TCP real_server 10.10.35.31 { weight 24 MISC_CHECK { misc_path "/usr/local/sbin/check_php_wrapper.sh 10.10.35.31" misc_timeout 30 } } real_server 10.10.35.32 { weight 24 MISC_CHECK { misc_path "/usr/local/sbin/check_php_wrapper.sh 10.10.35.32" misc_timeout 30 } } real_server 10.10.35.33 { weight 24 MISC_CHECK { misc_path "/usr/local/sbin/check_php_wrapper.sh 10.10.35.33" misc_timeout 30 } } real_server 10.10.35.34 { weight 24 MISC_CHECK { misc_path "/usr/local/sbin/check_php_wrapper.sh 10.10.35.34" misc_timeout 30 } } } http://www.austintek.com/LVS/LVS-HOWTO/HOWTO/LVS-HOWTO.fwmark.html [root@lb1 ~]# iptables -L -n -v -t mangle Chain PREROUTING (policy ACCEPT 182G packets, 114T bytes) 190M 167G MARK tcp -- * * 0.0.0.0/0 w1.x1.y1.4 multiport dports 80,443 MARK set 0x493e0 62M 58G MARK tcp -- * * 0.0.0.0/0 w1.x1.y2.4 multiport dports 80,443 MARK set 0x493e0 [root@lb1 ~]# ipvsadm -L IP Virtual Server version 1.2.1 (size=4096) Prot LocalAddress:Port Scheduler Flags -> RemoteAddress:Port Forward Weight ActiveConn InActConn FWM 300000 wrr persistent 180 -> 10.10.35.31:0 Masq 24 1 0 -> dis2.domain.com:0 Masq 24 3 231 -> 10.10.35.33:0 Masq 24 0 208 -> 10.10.35.34:0 Masq 24 0 0 At the time the realservers were setup, there was a misconfigured dns for some hosts in the 10.10.35.0/24 network. Thereafter, we fixed the DNS. However, the hosts continue to show up as only their IP numbers (10.10.35.31,10.10.35.33,10.10.35.34) above. [root@lb1 ~]# host 10.10.35.31 31.35.10.10.in-addr.arpa domain name pointer dis1.domain.com. OS is CentOS 6.3. Ipvsadm is ipvsadm-1.25-10.el6.x86_64. kernel is kernel-2.6.32-71.el6.x86_64. Keepalived is keepalived-1.2.7-1.el6.x86_64. How can we get ipvsadm -L to list all realservers by their proper hostnames?

  Read the article

• Firebird 2.5 Database Corrupt

  - by BrendanH

  We have an issue where a database hangs the server when: a backup is performed (Hangs on a specific table) selecting * or count(1) from a specific table or viewing data that is related to the table (FKs, etc) We could browse the table to a certain point (using IBExpert) however after about 2900 records the machine just spikes and hangs. Performing a gfix -m does not work, and the validation reports back Record level errors = 4 (no matter how many times we run gfix -m, -v, etc. The Firebird.log file reports back these types of messages: Relation has 91631 orphan backversions (9214273 in use) in table BINS (137) - {Which is apparently just a warning} Unable to complete network request to host "MHPLZA1". Error reading data from the connection. INET/inet_error: read errno = 10054 SERVER/process_packet: broken port, server exiting Shutting down the server with 1 active connection(s) to 1 database(s), 0 active service(s) - {If we leave the backup to run while hanging, it eventually logs this error message} The setup is: The table is question has about 7000 records. The Firebird version is 2.5 Classic Server x64 install. The OS is Windows Server 2008. This is a virtual machine (VMWare) running on a massive server. (Does anyone have issues with VMs and Firebird?). We have the same setup running fine on other servers (However they are not virtual machines). Is there anyway to pin point the issue and or the cause?

  Read the article

< Previous Page | 323 324 325 326 327 328 329 330 331 332 333 334  | Next Page >