Search Results

Search found 11001 results on 441 pages for 'native drag drop'.

Page 328/441 | < Previous Page | 324 325 326 327 328 329 330 331 332 333 334 335  | Next Page >

  • Apache log rotation: logrotate vs rotatelogs vs chronolog

    - by Enrico
    I have been researching log rotation for my server which hosts ~5 fairly high traffic sites. From what I can tell, my options are to use logrotate or to use piped logging with either rotatelogs or chronolog. logrotate requires a restart of apache and both SIGHUP and SIGUSR1 restarts are less than ideal on high traffic sites, because either you drop a bunch of connections or you need to delay compressing the old log until all child processes have died naturally. Also, downtime can be quite significant if compression is enabled. Would using logrotate - without compression and with graceful restart - and compressing old logs after the fact be the best way to minimize downtime? chronolog and rotatelogs sound promising, but are not well documented. I couldn't find examples of using either in combination with vhost specific logs. The chronolog website says, "when the expanded filename changes, the current file is closed and a new one opened". Is this globally? Or is that per AccessLog, CustomLog or ErrorLog directive? Is there a significant difference between chronolog and rotatelogs?

    Read the article

  • Ubuntu/Nvidia lists DVI dual cable as single

    - by Joseph Mastey
    I have an NVidia Quadro FX 880M graphics card, from which I am trying to drive 2 monitors: my internal laptop montior (15.6", 1920x1080, Nvidia driver says it's running via DisplayPort) and an external 27" monitor (Dell U2711, 2560x1440 native resolution, via DVI). I've hooked the dual DVI cable to the dual DVI port on my dock (Dell PR03X) and installed the proprietary NVidia driver, but I cannot seem to get the full 2560x1440 out of the larger 27" external monitor. Looking at the NVidia driver settings, the monitor's connection is reported as a single DVI cable, rather than a dual one, which would explain the reduced resolution. Does anyone have any experience with an issue like this? What can I do to make full use of my new monitor? (Possibly) Relevant Information: There is no DVI port on the laptop itself, but one is provided via the dock. The laptop and dock both provide a DisplayPort jack, but I have been unable to get this working on either w/ the monitor. I did have the nouveau driver installed when I installed the nvidia proprietary driver, but have since removed it (no change in the monitor situation when I removed it). The 27" reports a max resolution of 1680x1050. Thanks, Joe

    Read the article

  • PECL install error after upgrading to OSX 10.8

    - by Clive
    I've just upgraded my OS to Mountain Lion and PECL is no longer working (it's on a test drive so no drama, but I'd like to get it working so I can upgrade the OS on my shiny new SSD as well). I'm using the native PHP installation, no macports/homebrew or anything like that. Running sudo pecl install uploadprogress (for example) produces the following terminal output: downloading uploadprogress-1.0.3.1.tgz ... Starting to download uploadprogress-1.0.3.1.tgz (9,040 bytes) .....done: 9,040 bytes 4 source files, building running: phpize grep: /usr/include/php/main/php.h: No such file or directory grep: /usr/include/php/Zend/zend_modules.h: No such file or directory grep: /usr/include/php/Zend/zend_extensions.h: No such file or directory Configuring for: PHP Api Version: Zend Module Api No: Zend Extension Api No: autom4te: need GNU m4 1.4 or later: /usr/bin/m4 ERROR: `phpize' failed I'm guessing the problem is the 3 grep lines. I've found several threads that suggest this is caused by XCode not being installed...but XCode is installed, and updated to the latest version (4.4). All the relevant symlinks to /Developer/usr/bin/* also exist as they should. m4 is currently at version: m4 (GNU M4) 1.4.13, so even though the output above contains a line pertaining to it, I don't think that can be the problem. I'm sure it's just a simple issue, anyone got any clues?

    Read the article

  • How to use cyg-wrapper to fork a new tab in win32 gvim

    - by Peter Nore
    I would like to set up an alias in my cygwin .bashrc that translates pathnames unix-to-dos and passes them to windows gvim in a new tab of an existing instance. I am trying to use Luc Hermitte's cyg-wrapper script for running native win32 applications from Cygwin as per this vim tip. Luc's example of how to use his script is: alias vi= 'cyg-wrapper.sh "C:/Progra~1/Edition/vim/vim63/gvim.exe" --binary-opt=-c,--cmd,-T,-t,--servername,--remote-send,--remote-expr' I do not understand this example because most of these vim parameters (-c,--cmd,--servername,--remote-send,--remote-expr, etc) require more information, and I have not found any example of how to supply the additional information to cyg-wrapper.sh. For example, calling C:/Progra~1/Edition/vim/vim63/gvim.exe --servername=GVIM --remote-tab-silent file1 & will open file1 in a new tab of existing (or non existing) instance GVIM, but calling gvim --servername accomplishes nothing on its own. Unfortunately, though, the corresponding cyg-wrapper phrase does not work: cyg-wrapper.sh "C:/Progra~1/Edition/vim/vim63/gvim.exe" --binary-opt=--servername=GVIM,--remote-tab-silent --fork=2 file1 If ran twice, this actually opens up two instances of gvim; it is as if the servername 'GVIM' is being stripped and ignored. How do you supply a servername to gvim --servername or a .vimrc to gvim -u using cyg-wrapper.sh? Furthermore, why is it that programs must be passed to cyg-wrapper.sh in the relatively obscure "mixed form?" For example, if I try cyg-wrapper.sh "/cygdrive/c/path/to/GVimPortable.exe" --binary-opt=--servername=GVIM,--remote-tab-silent --fork=2 I get "Invalid switch - "/cygdrive"." See also: getting-gvim-to-automatically-translate-a-cygwin-path alias-to-open-gvim-cream-version-from-cygwin-shell

    Read the article

  • Outgrew MongoDB … now what?

    - by samsmith
    We dump debug and transaction logs into mongodb. We really like mongodb because: Blazing insert perf document oriented Ability to let the engine drop inserts when needed for performance But there is this big problem with mongodb: The index must fit in physical RAM. In practice, this limits us to 80-150gb of raw data (we currently run on a system with 16gb RAM). Sooooo, for us to have 500gb or a tb of data, we would need 50gb or 80gb of RAM. Yes, I know this is possible. We can add servers and use mongo sharding. We can buy a special server box that can take 100 or 200 gb of RAM, but this is the tail wagging the dog! We could spend boucoup $$$ on hardware to run FOSS, when SQL Server Express can handle WAY more data on WAY less hardware than Mongo (SQL Server does not meet our architectural desires, or we would use it!) We are not going to spend huge $ on hardware here, because it is necessary only because of the Mongo architecture, not because of the inherent processing/storage needs. (And sharding? Please! Cost aside, who needs the ongoing complexity of three, five, or more servers to manage a relatively small load?) Bottom line: MongoDB is FOSS, but we gotta spend $$$$$$$ on hardware to run it? We sould rather buy commercial SW! I am sure we are not the first to hit this issue, so we ask the community: Where do we go next? (We already run Mongo v2) Thanks!!

    Read the article

  • Hudson plugin problem

    - by user27644
    Hi. I've created almost the same plugin as JobTypeColumn. There is only one difference - it shows job description instead of job type. But after i can't add this column to my list view. I have an NullPointerException after i edited my config.xml manually. java.lang.NullPointerException at hudson.model.Descriptor.newInstancesFromHeteroList(Descriptor.java:626) at hudson.util.DescribableList.rebuildHetero(DescribableList.java:164) at hudson.model.ListView.submit(ListView.java:262) at hudson.model.View.doConfigSubmit(View.java:484) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source) at java.lang.reflect.Method.invoke(Unknown Source) at org.kohsuke.stapler.Function$InstanceFunction.invoke(Function.java:185) at org.kohsuke.stapler.Function.bindAndInvoke(Function.java:101) at org.kohsuke.stapler.Function.bindAndInvokeAndServeResponse(Function.java:54) at org.kohsuke.stapler.MetaClass$1.doDispatch(MetaClass.java:74) at org.kohsuke.stapler.NameBasedDispatcher.dispatch(NameBasedDispatcher.java:30) at org.kohsuke.stapler.Stapler.invoke(Stapler.java:492) at org.kohsuke.stapler.MetaClass$6.doDispatch(MetaClass.java:180) at org.kohsuke.stapler.NameBasedDispatcher.dispatch(NameBasedDispatcher.java:30) at org.kohsuke.stapler.Stapler.invoke(Stapler.java:492) at org.kohsuke.stapler.Stapler.invoke(Stapler.java:408) at org.kohsuke.stapler.Stapler.service(Stapler.java:117) at javax.servlet.http.HttpServlet.service(HttpServlet.java:45) at winstone.ServletConfiguration.execute(ServletConfiguration.java:249) at winstone.RequestDispatcher.forward(RequestDispatcher.java:335) at winstone.RequestDispatcher.doFilter(RequestDispatcher.java:378) at hudson.util.PluginServletFilter$1.doFilter(PluginServletFilter.java:94) at net.bull.javamelody.MonitoringFilter.doFilter(MonitoringFilter.java:304) at org.jvnet.hudson.plugins.monitoring.HudsonMonitoringFilter.doFilter(HudsonMonitoringFilter.java:31) at hudson.util.PluginServletFilter$1.doFilter(PluginServletFilter.java:97) at hudson.util.PluginServletFilter.doFilter(PluginServletFilter.java:86) at winstone.FilterConfiguration.execute(FilterConfiguration.java:195) at winstone.RequestDispatcher.doFilter(RequestDispatcher.java:368) at hudson.security.csrf.CrumbFilter.doFilter(CrumbFilter.java:47) at winstone.FilterConfiguration.execute(FilterConfiguration.java:195) at winstone.RequestDispatcher.doFilter(RequestDispatcher.java:368) at hudson.security.ChainedServletFilter$1.doFilter(ChainedServletFilter.java:84) at hudson.security.ChainedServletFilter.doFilter(ChainedServletFilter.java:76) at hudson.security.HudsonFilter.doFilter(HudsonFilter.java:164) at winstone.FilterConfiguration.execute(FilterConfiguration.java:195) at winstone.RequestDispatcher.doFilter(RequestDispatcher.java:368) at winstone.RequestDispatcher.forward(RequestDispatcher.java:333) at winstone.RequestHandlerThread.processRequest(RequestHandlerThread.java:244) at winstone.RequestHandlerThread.run(RequestHandlerThread.java:150) at java.lang.Thread.run(Unknown Source)

    Read the article

  • No video playback when using home sharing on iTunes for Windows

    - by Diago
    I recently configured iTunes Home Sharing on my home network. My WHS server is the central library sharing both my Music and Video files. All my videos are encoded into H.264/MP4 format. All my machines are authorized and has access to Home Sharing. All my machines are running the latest version of iTunes 9. On my Snow Leopard machines iTunes happily plays the videos and music with no issues. On the Windows 7 machines however the play button fades for about 2 seconds when selecting a shared video and then nothing happens. The Windows machines are running the latest Community Codec Pack. Music sharing works perfectly on the Windows machines. When accessing the videos through the native WHS media connect sharing as well as through the file share I can play them perfectly on the Windows 7 machines. When adding the file to the iTunes library on the Windows 7 machine it also plays perfectly. Any advice, ideas or suggestions as to how to play the videos I have shared through Home Sharing on Windows 7?

    Read the article

  • Install Ubuntu on a new netbook?

    - by torbengb
    I'm planning to buy a netbook, and I am considering to install Ubuntu on it. It would mainly be used by my wife at home for web browsing and email at home (lightweight is important, hence a netbook!), and we'd occasionally bring it along on travels (mostly as digital photo dropzone). I want to use Ubuntu instead of Windows because I'm sick of all the Windows hassle and updates. I'm not concerned about Windows applications; I'd switch to native alternatives as far as possible because really only Firefox and something like Picasa are needed. I'm considering an ASUS Eee PC 1001P or an MSI Wind U100 or an Point of View Mobii II (click the links for specs; nevermind that the rest is German). I'm not in the USA. Whatever I buy will most likely have Windows 7 on it but no optical drive. I would also buy a large-ish USB stick but not an external optical drive. Should I (and can I) install Ubuntu alongside Windows 7, or remove Windows? If I remove Windows first, how would I be able to reinstall it if I change my mind? Can I make a backup? Is a recovery CD usually provided? Should I choose the regular Ubuntu, or the Ubuntu Netbook Remix (UNR)? Does UNR allow me to install additional applications just as easily? Note: I'm asking about Ubuntu vs. Windows; let's skip the hardware discussion for now. Edit: I'm assuming that Windows is already installed; if it isn't then I would only install Ubuntu and this question is irrelevant.

    Read the article

  • Install MatroskaProp on Windows 7 x64

    - by Neophytos
    To see more information in Windows Explorer property pages and menus about Matroska Video (.mkv) files, similar to what one can see when selecting native Windows media (.avi, .asf, .wmv or even just plain old mpg) files, Matroska links (from http://www.matroska.org/downloads/windows.html) to a download of the MatroskaProp shell extension (http://www.jory.info/serendipity/archives/14-MatroskaProp-2.8-Released.html). It used to work for me under Windows XP 32-bit. Now I have Windows 7 x64, and downloaded, installed and ran it. Configuration and settings page is fine. But it does not seem to actually register any shell extension. Nothing is added to Explorer windows, menus or property pages when selecting .mkv or .mks files). I tried calling the register hook manually using regsvr32.dll, that again invoked the configuration window and let me set all options, and when confirming even said the registration succeeded, but seems to have had no effect. In the registry I cannot find any traces of the shell extension being installed. Can this extension be made to work under Windows 7 or x64 systems? Are there known problems with installing this or other old shell extensions on x64, or on Windows 7?

    Read the article

  • Windows Authentication behaves oddly when VPN'd

    - by Dan F
    Hi all We've got a few apps that rely on windows authentication - a couple of web apps with AD auth turned on and we usually connect to our SQL servers with windows auth. This normally runs without a hitch. It doesn't work so well if we're VPN'd to a client site though. SSMS Opening SSMS normally from the start menu, then picking a server that normally accepts windows auth, results in a message saying: Login failed. The login is from an untrusted domain and cannot be used with Windows authentication. (.Net SqlClient Data Provider) If I drop to a command prompt and use runas /user:domain\user to launch SSMS I can successfully windows auth to our SQL server instances with that ssms process. If I look in task manager, both copies of ssms.exe (start menu vs runas) have the same user, and I can see no discernible differences between the processes in procexp. AD Auth websites If I open IE and browse to any of our websites that require an authenticated windows user, I get the "who are you" prompt, and that dialog thinks I'm whoever the VPN user is. I can click "Use another account" and authenticate that way though. Outlook Even Outlook prompts for a username when we are VPN'd! It's affecting our Win7 and Vista machines. It's been a while since we had an XP box, but I don't recall having this issue on XP for what it's worth. The VPN connections are just using the built in windows VPN connections, they're not fancy cisco VPNs or anything of that nature. Does anyone know how to tell windows that I'd like to be my normal old primary domain user rather than the VPN user when authenticating to resources in our domain? Heck, I'd be happy with a solution that prompted me with the "who are you" if I was trying to access windows auth requiring resources on the client's VPN. Thanks! Apologies if this is more a superuser question, I wasn't sure which site it best suited. It's about networking and infrastructure and plagues all of our developers here, so I hope it's a serverfault Q.

    Read the article

  • Is there a way to tell what the download speed is from a site/server

    - by Memor-X
    i'm looking into which ISP i should go with at the place i'm moving into, one ISP which i have been told good things about has data limits (which when breached will drop your speed to dial-up speed) but multiple memberships which, apart from the cheapest membership, have the same data limits (the cheapest has a 10GB data limit) in their fine print, they say that each different membership has different port speeds, one particular part jumps out at me These speeds are the NBN (National Broadband Network) port speed and not the actual Internet data speed which will vary based on numerous factors including destination you are reaching, your network equipment, network congestion etc. i plan to use the net to download DLC and patch updates for games (particular the insanely large update for the Wii U) and games from Steam (if i find any good one other than this one JRPG) and downloading development resources from free sites like Deposit Files and Mediafire since one membership with a 1000GB data limit is $145 with the port speed being 12Mbps/1Mbps (cheapest) while another with the same limit is $190 with the port speed of 100Mbps/40Mbps (expensive) i am wondering how i can tell what the speed coming from site is since i don't want to be wasting money on speed that makes no difference (unlike memory which i rather have to spare) NOTE: the speeds are for a fiber optic network which where my new place is can only connect via fixed wireless which i may not be able to get with this ISP but if i can get this network then good NOTE 2: most of the resources i get from Deposit Files are always about 200 MB or less, if a resource pack is greater then it's split into multiple archives (like .7z.part) while Mediafire i have to see one bigger than 150MB NOTE 3: one update patch for a PS3 game is close to 4 GB (Disgaea 4) which i need to get access to the DLC and on the weekend i downloaded 5 GB for the Final Fantasy XIV Open Beta for the PS3 which took almost 5 hours

    Read the article

  • red5 Install on Ubuntu 10.04? Problems with libslf4j

    - by mrgordon
    I've been trying for many days to get Red5 to install on Ubuntu 10.04. I finally managed to get red5.sh to stop hanging a few seconds in but now I'm getting the following error: Setting default logging context: default Exception in thread "main" java.lang.reflect.InvocationTargetException at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.red5.server.Bootstrap.bootStrap(Bootstrap.java:135) at org.red5.server.Bootstrap.main(Bootstrap.java:50) Caused by: java.lang.NoSuchMethodError: org.slf4j.impl.StaticLoggerBinder.getContextSelector()Lch/qos/logback/classic/selector/ContextSelector; at org.red5.logging.Red5LoggerFactory.getLogger(Red5LoggerFactory.java:121) at org.red5.logging.Red5LoggerFactory.getLogger(Red5LoggerFactory.java:108) at org.red5.server.Launcher.launch(Launcher.java:51) ... 6 more I suspected that this had to do with slf4j not being installed or on my classpath. I installed logback and libslf4j-java from aptitude and I see related files in my red5 lib directories. For example: /usr/share/red5/lib/slf4j-api-1.6.1.jar /usr/share/red5/lib/log4j-over-slf4j-1.6.1.jar /usr/share/red5/lib/logback-classic-0.9.26.jar /usr/share/red5/lib/logback-core-0.9.26.jar /usr/share/red5/lib/jcl-over-slf4j-1.6.1.jar /usr/share/red5/lib/jul-to-slf4j-1.6.1.jar And I set my classpath to /usr/share/red5/lib/ Any ideas on where to proceed from here? There seem to be a lot of people having trouble getting 10.04 and red5 0.9 working together. I've tried red5-0.9.1.tar.gz and red5_0.9.0-RC1_all.deb. The libraries above should be all that are needed according to Red5's documentation and I got the latest version of each.

    Read the article

  • Check for updates of a specific Debian package list

    - by Erwan Queffélec
    The setup I run a Debian Squeeze host that I use to build a multilanguage project (python, java, php...) and generate custom packages (debian and RPM) automatically (through jenkins) The problem The target distributions of those Debian packages are Etch, Lenny and Squeeze. But our project has some native dependencies that are available only through the DebianRelease + 1 repository (i.e Lenny + 1 == Squeeze, Squeeze + 1 == Wheezy). We for example, need the jetty packages from Squeeze in Lenny, and the cyrus-imapd-2.4 packages from Wheezy in Squeeze. Some additional info : Some package we can simply 'backport by hand' by mirroring the DebianRelease + 1 packages to our own repositories. For instance, the jetty package from Squeeze will run fine on Lenny because it doesn't need an s**tload of additional dependencies However we do need to rebuild some packages. For instance, cyrus-imapd-2.4 from Wheezy has a lot of unsatisfied dependencies on Squeeze. So we need to rebuild it in Squeeze and then upload it to our repo. The question I need to have a simple way of knowing if they are any updates on those extra packages (both "normal" and "security" updates). I could write a simple script that runs weekly, get some parameters from a file, and generate an update report. Let's say the file looks like this: jetty:squeeze cyrus-imapd-2.4:wheezy The script should run as normal user not to mess up the system apt configuration and issue the appropriate commands to generate that report. Does Debian has some built-in apt-* commands/options dedicated to that kind of problem I could use to write this script ? If not, can someone think of another clean solution to achieve what I need ?

    Read the article

  • fail2ban Error Gentoo

    - by Mark Davidson
    Hi All I've recently setup a new VPS running Gentoo (My first time using the distro so please forgive me is this is a really easy one) and as I've done with other servers installed fail2ban. Setting it up to block the host via iptables, on too many unsuccessful logins with ssh. However I'm getting a strange error that I can't quite solve. When I start fail2ban I get these lines in the error log 2009-11-13 18:02:01,290 fail2ban.jail : INFO Jail 'ssh-iptables' started 2009-11-13 18:02:01,480 fail2ban.actions.action: ERROR iptables -N fail2ban-SSH iptables -A fail2ban-SSH -j RETURN iptables -I INPUT -p tcp --dport ssh -j fail2ban-SSH returned 100 If I try and force a ban these errors show up in the log and the host is not banned 2009-11-13 11:23:26,905 fail2ban.actions: WARNING [ssh-iptables] Ban XXX.XXX.XXX.XXX 2009-11-13 11:23:26,929 fail2ban.actions.action: ERROR iptables -n -L INPUT | grep -q fail2ban-SSH returned 100 2009-11-13 11:23:26,930 fail2ban.actions.action: ERROR Invariant check failed. Trying to restore a sane environment 2009-11-13 11:23:27,007 fail2ban.actions.action: ERROR iptables -N fail2ban-SSH iptables -A fail2ban-SSH -j RETURN iptables -I INPUT -p tcp --dport ssh -j fail2ban-SSH returned 100 2009-11-13 11:23:27,016 fail2ban.actions.action: ERROR iptables -n -L INPUT | grep -q fail2ban-SSH returned 100 2009-11-13 11:23:27,016 fail2ban.actions.action: CRITICAL Unable to restore environment My versions are as follows Linux masked 2.6.18-xen-r12 #2 SMP Wed Mar 4 11:45:03 GMT 2009 x86_64 Intel(R) Xeon(R) CPU E5504 @ 2.00GHz GenuineIntel GNU/Linux net-analyzer/fail2ban-0.8.4 net-firewall/iptables-1.4.3.2 If anyone could shead some light on these errors that would be great, I did wonder if it was a problem with iptables or some kernel modules but I can block an IP if I do. iptables -I INPUT -s 25.55.55.55 -j DROP so makes me think its something a bit more unusual. Thanks a lot in advance

    Read the article

  • IRC newbie needs detailed "How To" directions for freenode.net connection with OS X IRC app

    - by Johnny Utahh
    Newbie IRC user here. Trying to get connected on freenode.net, preferably with a native Mac OS X client (I'm running 10.6.8), or at least something with a good "OS X feel." Also seeking a client that comes "well regarded" in Mac community (eg, Linkinus reflects outstanding Apple App Store user ratings). Thus far have found it remarkably difficult to "get started from scratch" with ANY client. All attempted clients (Colloquy, Textual, Linkinus) experience some sort of "* Notice -- You need to identify via SASL to use this server" error. I see this freenode SASL-friendly client list; am I really limited to only these clients? This "IRC-freenode startup" procedure has been far more difficult than I had originally anticipated. Why can't I just do this and have it "just work"? Bottom line: looking for a "chapter and verse"/cookbook description of how to get started with freenode.net IRC chat rooms on Mac OS. Need reference to known-working client, and then exact directions on how to get connected to a chat room with a nickname.

    Read the article

  • Apache Won't Restart After Compiling PHP with Postgres

    - by gonzofish
    I've compiled PHP (v5.3.1) with Postgres using the following configure: ./configure \ --build=x86_64-redhat-linux-gnu \ --host=x86_64-redhat-linux-gnu \ --target=x86_64-redhat-linux-gnu \ --program-prefix= \ --prefix=/usr/ \ --exec-prefix=/usr/ \ --bindir=/usr/bin/ \ --sbindir=/usr/sbin/ \ --sysconfdir=/etc \ --datadir=/usr/share \ --includedir=/usr/include/ \ --libdir=/usr/lib64 \ --libexecdir=/usr/libexec \ --localstatedir=/var \ --sharedstatedir=/usr/com \ --mandir=/usr/share/man \ --infodir=/usr/share/info \ --cache-file=../config.cache \ --with-libdir=lib64 \ --with-config-file-path=/etc \ --with-config-file-scan-dir=/etc/php.d \ --with-pic \ --disable-rpath \ --with-pear \ --with-pic \ --with-bz2 \ --with-exec-dir=/usr/bin \ --with-freetype-dir=/usr \ --with-png-dir=/usr \ --with-xpm-dir=/usr \ --enable-gd-native-ttf \ --with-t1lib=/usr \ --without-gdbm \ --with-gettext \ --without-gmp \ --with-iconv \ --with-jpeg-dir=/usr \ --with-openssl \ --with-zlib \ --with-layout=GNU \ --enable-exif \ --enable-ftp \ --enable-magic-quotes \ --enable-sockets \ --enable-sysvsem \ --enable-sysvshm \ --enable-sysvmsg \ --with-kerberos \ --enable-ucd-snmp-hack \ --enable-shmop \ --enable-calendar \ --with-libxml-dir=/usr \ --enable-xml \ --with-system-tzdata \ --with-mime-magic=/usr/share/file/magic \ --with-apxs2=/usr/sbin/apxs \ --with-mysql=/usr/include/mysql \ --without-gd \ --with-dom=/usr/include/libxml2/libxml \ --disable-dba \ --without-unixODBC \ --disable-pdo \ --enable-xmlreader \ --enable-xmlwriter \ --without-sqlite \ --without-sqlite3 \ --disable-phar \ --enable-fileinfo \ --enable-json \ --without-pspell \ --disable-wddx \ --with-curl=/usr/include/curl \ --enable-posix \ --with-mcrypt \ --enable-mbstring \ --with-pgsql=/mnt/mv/pgsql I'm using Postgres 8.4.0 and Apache 2.2.8; I have the following line in my Apache conf file: LoadModule php5_module /usr/lib64/httpd/modules/libphp5.so And when I attempt to restart Apache, I get the following error message: Starting httpd: httpd: Syntax error on line 205 of /etc/httpd/conf/httpd.conf: Cannot load /usr/lib64/httpd/modules/libphp5.so into server: /usr/lib64/httpd/modules/libphp5.so: undefined symbol: lo_import_with_oid Now, I know that this is a problem with Postgres with PHP because lo_import_with_oid is a function in the Postgres source which allows the importing of large objects; also, if I remove the --with-pgsql option, PHP and Apache get along great. I've scoured the Internet looking for answers all day, but to no avail. Does anyone have ANY insight into what is causing my problems.

    Read the article

  • some PDF's to iPhones via ActiveSync are corrupt

    - by longneck
    we have two server applications (one .NET/ASP web app, the other a native Windows app) that generate PDF's that are then emailed to our users on Exchange 2010. the apps deliver the emails to the Exchange server via SMTP, and our iPhone/iPad users receive their email via activesync. pretty much all of the PDF's generated by the web app and many of the PDF's generated by the Windows app fail to open on an iPhone or iPad. tapping the attachment shows the screen that would display the PDF with the name of the file at the top but the bottom of the screen is completely grey. one thing i have figured out is that the attachment on the iPad is uuencoded. forwarding the attachment to another email address shows the uuencoded format. here's a sample: begin 600 unknown M)5!$1BTQ+C0-)>+CS],-"C8@,"!O8FH\/"](6S8U-B`Q-#A=+TQI;F5A<FEZ M960@,2]%(#DQ-#8O3"`Q,S`Q.2].(#$O3R`Y+U0@,3(X-3,^/@UE;F1O8FH- ---snip--- M,C8T,"`P,#`P,"!N#0IT<F%I;&5R#0H\/"]3:7IE(#8^/@T*<W1A<G1X<F5F .#0HQ,38-"B4E14]&#0H` ` end whereas the normal version of the file looks like a normal PDF: %PDF-1.4 %âãÏÓ 6 0 obj<</H[656 147]/Linearized 1/E 9698/L 13571/N 1/O 9/T 13405>> ---snip--- trailer <</Size 6>> startxref 116 %%EOF so i think the problem is that the attachment is being double uuencoded somewhere, or the iPhone is failing to recognize that the attachment is uuencoded and not decoding it. any suggestions on where to begin troubleshooting this problem?

    Read the article

  • How can I close a port that appears to be orphaned by Xvfb?

    - by Jim Fiorato
    I'm running Xvfb on a FC8 Amazon EC2 image. On occasion Xvfb will crash (unable at the moment to find out the reason for the crash), and after crashing the TCP port will appear to be orphaned. I'm unable to get a PID to kill any process that may be using it. I'm starting Xvfb with: Xvfb :7 -screen 0 1024x768x24 & Examples of what I'm working with are below, the Xvfb port is (was) 6007: # netstat -ap Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 *:ssh *:* LISTEN 1894/sshd tcp 0 0 *:6007 *:* LISTEN - tcp 0 352 ip-10-84-69-165.ec2.int:ssh c-71-194-253-238.hsd1:51689 ESTABLISHED 2981/0 udp 0 0 *:bootpc *:* 1817/dhclient udp 0 0 *:bootpc *:* 1463/dhclient Active UNIX domain sockets (servers and established) Proto RefCnt Flags Type State I-Node PID/Program name Path unix 2 [ ] DGRAM 871 668/udevd @/org/kernel/udev/udevd unix 2 [ ACC ] STREAM LISTENING 5385 1880/dbus-daemon /var/run/dbus/system_bus_socket unix 6 [ ] DGRAM 5353 1867/rsyslogd /dev/log unix 2 [ ] DGRAM 11861 2981/0 unix 2 [ ] DGRAM 5461 1974/crond unix 2 [ ] DGRAM 5451 1904/console-kit-da unix 3 [ ] STREAM CONNECTED 5438 1880/dbus-daemon /var/run/dbus/system_bus_socket unix 3 [ ] STREAM CONNECTED 5437 1904/console-kit-da unix 3 [ ] STREAM CONNECTED 5396 1880/dbus-daemon unix 3 [ ] STREAM CONNECTED 5395 1880/dbus-daemon unix 2 [ ] DGRAM 5361 1871/rklogd # lsof -i COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME dhclient 1463 root 3u IPv4 4704 UDP *:bootpc dhclient 1817 root 4u IPv4 5173 UDP *:bootpc sshd 1894 root 3u IPv4 5414 TCP *:ssh (LISTEN) sshd 2981 root 3u IPv4 11825 TCP ip-10-84-69-165.ec2.internal:ssh->c-71-194-253-238.hsd1.il.comcast.net:51689 (ESTABLISHED) Attempting to force the port closed with iptables doesn't seem to work either. iptables -A INPUT -p tcp --dport 6007 -j DROP I'm at a loss as to how to reclaim/free the port. From what I can tell, this port will remain in this state until the EC2 instance is shut down. So, how can I close this port so I can restart Xvfb?

    Read the article

  • Help diagnosing Likewise Open Active Directory authentication problem

    - by purpletonic
    I have two servers which were up until recently authenticating against the companies Active Directory Domain controller. I believe a recent change to the Active Directory administrator password caused the servers to stop authenticating against AD. I tried to add the servers back to the domain using the command: domainjoin-cli join example.com adusername this seemed to work without complaints, but when I try to login via ssh with my domain account, I get an invalid password error. When I run the command: lw-enum-users it prints all of the domain users, and looking up my own account, I see that it is valid and my password hasn't expired. I also ran lw-get-status and received the following: LSA Server Status: Agent version: 5.0.0 Uptime: 0 days 3 hours 35 minutes 46 seconds [Authentication provider: lsa-activedirectory-provider] Status: Online Mode: Un-provisioned Domain: example.com Forest: example.com Site: Default-First-Site-Name Online check interval: 300 seconds \[Trusted Domains: 1\] \[Domain: EXAMPLE\] DNS Domain: example.com Netbios name: EXAMPLE Forest name: example.com Trustee DNS name: Client site name: Default-First-Site-Name Domain SID: S-1-5-24-1081533780-4562211299-822531512 Domain GUID: 057f0239-7715-4711-e64b-eb5eeed20e65 Trust Flags: \[0x001d\] \[0x0001 - In forest\] \[0x0004 - Tree root\] \[0x0008 - Primary\] \[0x0010 - Native\] Trust type: Up Level Trust Attributes: \[0x0000\] Trust Direction: Primary Domain Trust Mode: In my forest Trust (MFT) Domain flags: \[0x0001\] \[0x0001 - Primary\] \[Domain Controller (DC) Information\] DC Name: dc1.example.com DC Address: 10.11.0.103 DC Site: Default-First-Site-Name DC Flags: \[0x000003fd\] DC Is PDC: yes DC is time server: yes DC has writeable DS: yes DC is Global Catalog: yes DC is running KDC: yes [Authentication provider: lsa-local-provider] Status: Online Mode: Local system Anyone got any ideas what might be occurring? Thanks in advance!

    Read the article

  • NFS v4, HA Migration, and stale handles on clients

    - by Karl Katzke
    I'm managing a server running NFS v4 with Pacemaker/OpenAIS. NFS is configured to use TCP. When I migrate the NFS server to another node in the Pacemaker cluster, even though the metadata is persisted, connections from the clients 'hang' and eventually time out after 90 seconds. After that 90 seconds, the old mountpoint becomes 'stale' and the mounted files can no longer be accessed. The 90 second grace period seems to be part of the server configuration and not the client configuration. I see this message on the server: kernel: NFSD: starting 90-second grace period If I restart the NFS client on the client nodes after I migrate (unmounting and then remounting the share), then I don't experience the problem, but connections and file transfers still interrupted. Three questions: What is the 90 second grace period? What's it there for? How can I keep the files from going stale on the clients without restarting them after I migrate the NFS server to another node? Is it actually possible to migrate the NFS server without having large file uploads drop?

    Read the article

  • Authentication required by wireless network.

    - by Roman
    I would like to use a wireless network from Ubuntu. In the network drop-down menu I select a network (this is a University network I have an account there). Then I get a windows with the following fields: Wireless Security: [WPA&WPA2 Enterprise] Authentication: [Tunneled TLS] Anonymous Identity: [] CA Certificate: [(None)] Inner Authentication: [some letters] User Name: [] Password: [] I put there my user name and password and do not change default value and leave "Anonymous Identity"blank. As a result of that I get "Authentication required by wireless network". How can I solve this problem? I think it is important to notice that our system administrator tried to find some files (which are probably needed to be used as "CA Certificate"). He said that he does not know where this file is located on Ubuntu (he support only Windows). So, probably this is direction I need to go. I need to find this file. But may be I am wrong. May be something else needs to be done. Could you pleas help me with that?

    Read the article

  • P2v options within a hyper-v environment.

    - by tony roth
    I have a server that san boots that I want to p2v. I have many options disk2vhd, scvmm etc but I was thinking about cloning the lun (flexclone, netapp) presenting it to my hyper-v r2 server. Within the hv manager do a create new disk then have it copy the cloned lun to a vhd file. Then do the bcdedit\bootsect stuff to it. Should work right? I'm also curious if anybodys booting vhd's that are on bootable luns? I've booted native vhd's just fine was just curious about the running them off a bootable lun. I think that this has quite a few advantages like instant p2v etc.. any thoughts on this? hmm dang as I was typing this I realized that I should not use the hv manager new disk copy routine, I should just disk2vhd the mounted lun. This has advantages in that it should be a lot faster!! discovered that disk2vhd may be flaky, crashed the first time I ran it! thanks

    Read the article

  • Windows 2003 DNS or IIS6 Problem?

    - by Mario
    Weird DNS problem... We have an intranet located internally on a windows 2003 / iis6 server - DNS handled internally on another windows 2003 server. The intranet, amongst other functions, hosts a ecommerce store I wrote that sells nike apparel embroidered with our company logo. Up until recently, it would send an email to payroll and the cost would be deducted from the employees paycheck. lets say this store is located at http://mydomain.com (only available internally) Now, we've been told by the accountants that we can no longer auto deduct from payroll and the employee needs to pay with a credit card or cash. So i went to thawte.com and ordered an SSL cert to be on the safe side (even though the CC gateway is secure) and they told me i need to drop the .com from the domain name Not wanting to mess with a system thats perfectly functional, i created another DNS entry that just points to mydomain (no .com) and left the old one in there. so they would go to http://mydomain On my Mac (OS X 10.6) i can hit either one just fine On Windows XP / Windows XP Embedded or Windows 7 (the vast majority of the pc's on our network) http://mydomain - returns nothing http://mydomain.com still works https://mydomain.com works but says the cert is invalid (as it should, it was issued to mydomain - not mydomain.com) my question is: why does it work on my Mac and not on a Windows PC (i get dhcp and dns just like any other pc on the network) and will removing the .com one from the DNS server resolve this? I've done all the usual attempts - ipconfig /flushdns, ipconfig /renew and release even going so far as to stop and restart DNS client on my Windows 7 box; rebooting and shutting down - adding a regedit entry something along the lines of SecureResponses and rebooting nothing works... I think its the .com and the not conflicting in DNS but i'm not sure - and why not on OS X We're closed on sunday and i'm going to remote in and see what happens if i remove the .com from DNS but any other ideas? -Mario

    Read the article

  • PXE booting LACP hosts on Force10 S50N with FTOS

    - by lolwutreddit
    Hardware: S50N Firmware: FTOS 8.4.2.6 Problem: We're trying to PXE boot some servers that are connected via port-channel interfaces with LACP. Current Work-around: we PXE boot a server with a single interface (eth0), and then use a Perl script to turn up the port-channel interfaces after the server is built. Details: Is anyone doing anything similar on Force10 S50 switches with FTOS? If not, is anyone doing this on another S series, or larger chassis-based Force10? I'm wondering if Native VLAN will solve this, since ports in a port-channel cannot explicitly have a VLAN set, and they don't seem to use the tagged or untagged VLAN that the port channel is in. I will confirm this next (I think it's the only thing I haven't tried) Juniper Example: http://broken.net/openindiana/how-to-pxe-boot-systems-on-lacp-using-juniper-switches/ Cisco: there are plenty of documented ways to solve this issue on IOS and Nexus Update/Edit: since there seems to be no way to use interface or port-channel mode commands to get the individual interfaces to show up in spanning-tree (rtsp in this case), the ports should never go into a forwarding state. I'm not going to mess with it anymore unless a) someone that has experience passes it on, or b) Force10 comes up with a solution for this (I'm guessing it will only be introduced on other S platforms (S55, S60), since the S50 seems to be near EOL). I'm basing that on the fact that the Open Automation type features are only being supported on the newer switches.

    Read the article

  • GlassFish cluster-targeted jdbc is not enabled

    - by Jin Kwon
    I have a GlassFish cluster. When I tried to add node and a instance, DAS saids a bunch of error messages telling Resource [ jdbc/xxxx ] of type [ jdbc ] is not enabled [#|2012-11-14T12:07:04.318+0900|SEVERE|glassfish3.1.2|javax.enterprise.system.core.com.sun.enterprise.v3.server|_ThreadID=2803;_ThreadName=Thread-2;|java.lang.StackOverflowError at java.io.FileOutputStream.writeBytes(Native Method) at java.io.FileOutputStream.write(FileOutputStream.java:318) at java.io.BufferedOutputStream.write(BufferedOutputStream.java:122) at java.io.PrintStream.write(PrintStream.java:480) at sun.nio.cs.StreamEncoder.writeBytes(StreamEncoder.java:221) at sun.nio.cs.StreamEncoder.implFlushBuffer(StreamEncoder.java:291) at sun.nio.cs.StreamEncoder.implFlush(StreamEncoder.java:295) at sun.nio.cs.StreamEncoder.flush(StreamEncoder.java:141) at java.io.OutputStreamWriter.flush(OutputStreamWriter.java:229) at java.util.logging.StreamHandler.flush(StreamHandler.java:242) at java.util.logging.ConsoleHandler.publish(ConsoleHandler.java:106) at java.util.logging.Logger.log(Logger.java:522) at com.sun.logging.LogDomains$1.log(LogDomains.java:372) at java.util.logging.Logger.doLog(Logger.java:543) at java.util.logging.Logger.log(Logger.java:607) at com.sun.enterprise.resource.deployer.JdbcResourceDeployer.deployResource(JdbcResourceDeployer.java:117) at org.glassfish.javaee.services.ResourceProxy.create(ResourceProxy.java:90) at com.sun.enterprise.naming.impl.SerialContext.lookup(SerialContext.java:507) at com.sun.enterprise.naming.impl.SerialContext.lookup(SerialContext.java:455) at javax.naming.InitialContext.lookup(InitialContext.java:411) at javax.naming.InitialContext.lookup(InitialContext.java:411) at com.sun.appserv.connectors.internal.api.ResourceNamingService.lookup(ResourceNamingService.java:221) the JDBC Resource is ok and targeted with the cluster. I've installed the JDBC driver on the new node. Can anybody help?

    Read the article

< Previous Page | 324 325 326 327 328 329 330 331 332 333 334 335  | Next Page >