Search Results

Search found 8942 results on 358 pages for 'print'.

Page 328/358 | < Previous Page | 324 325 326 327 328 329 330 331 332 333 334 335  | Next Page >

• Certain clients (IP range) can not ping server

  - by Logman

  I just virtualized a Windows 2003 Server SP2 x32. The server contained our help desk server (Spiceworks) and our anti virus management server (ESET RAC). The host computer actually contained the virtualized server originally; I created the vhd and then I wiped this system clean and installed Windows 2008 R2 x64 Datacenter and added the virtualized 2003 onto the Hyper-V 2008 R2 Server. I got the server running fine except for... certain ip ranges. Local clients can get updates from the AV server from my 192.168.180.xxx & 192.168.181.xxx BUT NOT from any 192.168.182.xxx, 192.168.183.xxx, 192.168.184.xxx etc... I can not ping the server from any clients except for the 180. & 181. ranges. Now I created 2 other virtualized servers (win2008 & a win7 pro) and they exist on the same virtual host as the 2003 server. And at first I could not ping those until I went to the "\Network and Sharing Center\Advanced sharing settings" and Turned On File and Print Sharing. Then I could ping and access those virtualized guests. Win2003 server isn't quite the same. But I am sure I have it on. But now when I ping from a client on one of those ranges that would not work I get this: As you can see the ping leaves our network. We have 2 ad/dns servers (one 180. & the other in the 181. range). Is it DNS? Both AD/DNS servers are Windows 2003. And we plan on upgrading both to 2008 R2 within a month or two but I need to fix this issue pronto (esp the AV end). btw, I did rename that 2003 Server (Spiceworks/AV) hostname. And I tried a CNAME. But I do not think that is the problem. EDIT: OR because this server existed on this hardware/computer before becoming virtualized?

  Read the article

• Critique My Backup and Storage Plan

  - by MetaHyperBolic

  My current storage (RAID-1 off of a hardware RAID card) and backup (a spare drive) solutions for my home network are inadequate. I have too much data scattered on various one-off drives. It is time to evolve. Backups seem simple enough, at least: lots of big drives. However, I am bewildered by the number of choices for small home storage. The Drobo S looks appealing. So does the ReadyNAS. I am not looking for bunches of shiny features, I'm mostly interested in reliability. I am not interested in building Yet Another PC to create a file server or doing something in the cloud, or whatever. I'm stupid, so I am keeping it simple. Requirements for Main Volume: Starting working space roughly 2TB, with options for growth up to 5TB RAID or something RAID-like with at least one parity drive eSATA II for speed during backups Ability to shut down gracefully when alerted of low power by a UPS Optional but Desirable: Will take 2TB drives now with options for the larger 3TB drives coming in 2010-2011 Optional but Desirable: : RAID-6 or something similar, with two parity drives Optional but Desirable: : Hot spare Ethernet connection not required, as the volume will be shared via the same machines which runs my home print server Backups: Backup performed via ROBOCOPY in mirror mode to an external hard drive via a eSATA II connection. Start with rotating between two external 2TB hard drives, will go up to six external 2TB drives. Start with a weekly backup, move to a bi-weekly backup as more drives are added. Move to 3TB drives as the size of my main volume increases. Backup drives will be stored on an off-site location. Hard drives: I plan on buying all of the same model, but different batches from different vendors. I found a "burn-in" utility with which I can pound away on the drives for a couple of weeks before adding them to the backup pool or the main volume. I estimate that I am looking at roughly $1,500 to start, once I start throwing in two TB drives for backup and four for storage. So, are there any obvious flaws in my plan? What have I overlooked? Any suggestions for the storage device for my main volume that fits my requirements? Or do I just keep it simple, 2 drives in RAID-1, then perform due diligence with my backups, accepting that I will have to buy a whole new unit when my data grows past 2TB?

  Read the article

• Setting up Apache and PHP on Mac OS X Snow Leopard

  - by Martin Bean

  I've recently purchased an Apple iMac. Unfortunately, enabling Apache and PHP has thrown up some problems. I enabled Mac's built-in Web Sharing through System Preferences, at which point I got an output and could add HTML files to my user directory. However, PHP files were being displayed rather than interpreted. I then discovered this is because PHP isn't enabled by default on Mac's Apache set-up. After a quick Google search, I came across this page: http://developer.apple.com/mac/articles/internet/phpeasyway.html I proceeded to the section, Enabling PHP in Apache, copying and pasting the following code snippet into a new Terminal window and hitting Return: set admin_email to (do shell script "defaults read AddressBookMe ExistingEmailAddress") user_www=$HOME/Sites filename=php-test user_index=${user_www}/${filename}.php user_db=${user_www}/${filename}-db.sqlite3 # NOTE: Having a writeable database in your home directory can be a security risk! conf=`apachectl -V | awk -F= '/SERVER_CONFIG/ {print \$2}'| sed 's/"//g'` conf_old=$conf.$$ conf_new=/tmp/php_conf.new touch $user_db chmod a+r $user_index chmod a+w $user_db chmod a+w $user_www echo "Enabling PHP in $conf ..." sed '/#LoadModule php5_module/s/#LoadModule/LoadModule/' $conf | sed "s^[email protected]^<b>\$admin_email</b>^" > $conf_new echo "(Re)Starting Apache ..." osascript <<EOF do shell script "/bin/mv -f $conf $conf_old; /bin/mv $conf_new $conf; /usr/sbin/apachectl restart" with administrator privileges EOF Unfortunately, this has completed thrown Apache and now nothing is being served; instead I'm receiving "Failed to open page" errors because it cannot connect to the server, despite Web Sharing still being active in System Preferences. So therefore I guess my question is this: how can I undo the changes made by the copy-and-pasting of the above code snippet? Admittedly, I don't understand what the above did; I just thought it looked like a Terminal command and tried it. I have no experience in setting up Apache on Mac OS X (and I've only installed XAMPP and WampServer on Windows). So any points on reversing the aforementioned, and then successfully enabling PHP would be great. EDIT: I've discovered, via Console, the following error message is being recorded when trying to browse to 127.0.0.1... (org.apache.httpd) Throttling respawn: Will start in 10 seconds no listening sockets available, shutting down Unable to open logs (org.apache.httpd[13453]) Exited with exit code: 1 Does this point any more to the issue? EDIT #2: I'm now getting this in Console... 15/02/2010 21:24:14 osascript[3597] Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find: /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper

  Read the article

• Trouble setting up PATH for Java on Debian

  - by milkmansrevenge

  I am trying to get Oracle Java 7 update 3 working correctly on Debian 6. I have downloaded and set up the files in /usr/java/jre1.7.0_03. I have also set the following two lines at the end of /etc/bash.bashrc: export JAVA_HOME=/usr/java/jre1.7.0_03 export PATH=$PATH:$JAVA_HOME/bin Logging in as other users and root is fine, Java can be found: chris@mc:~$ java -version java version "1.7.0_03" Java(TM) SE Runtime Environment (build 1.7.0_03-b04) Java HotSpot(TM) 64-Bit Server VM (build 22.1-b02, mixed mode) However there are two cases where Java cannot be found as detailed below. Note that both of these worked fine when I have previously installed OpenJDK Java 6 via aptitude, but I need Oracle Java 7 for various reasons. Most importantly, I cannot run commands as another user via su, despite the PATH showing that Java should be present. The user was created with adduser chris root@mc:~# su chris -c "echo $PATH" /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/java/jre1.7.0_03/bin:/bin root@mc:~# su chris -c "java -version" bash: java: command not found root@mc:~# su chris -c "/usr/java/jre1.7.0_03/bin/java -version" java version "1.7.0_03" ... How can it be in the PATH but not be found? Update 05/04/2012: explained by Daniel, to do with it being a non-interactive shell so files such as /etc/profile and /etc/bash.bashrc are not executed. Doing a full swap to that user and running Java works: root@mc:~# su chris chris@mc:/root$ java -version java version "1.7.0_03" ... I run a script on start up which exhibits similar but slightly different problems. The script is located in /etc/init.d/start-mystuff.sh and calls a jar: #!/bin/bash # /etc/init.d/start-mystuff.sh java -jar /opt/Mars.jar I can confirm that the script runs on start up and the exit code is 127, which indicates command not found. Inserting a line to print/save the PATH shows that it is: /sbin:/usr/sbin:/bin:/usr/bin This second problem isn't as important because I can just point directly to the Java executable in the script, but I am still curious! I have tried setting the full PATH and JAVA_HOME explicitly in /etc/environment which didn't help. I have also tried setting them in /etc/profile which doesn't seem to help either. I have tried logging in and out again after setting PATH in the various locations (duh!). Anyway, long post for what will probably have a simple one line solution :( Any help with this would be greatly appreciated, I have spent far too long trying to fix it by myself. Motivation The first problem may seem obscure but in my system I have users that are not allowed SSH access yet I still want to run processes as them. I have a ton of scripts operating in this way and don't want to have to change them all.

  Read the article

• GeForce 8800GT not even giving basic output

  - by Sam

  My Dad bought a GeForce 8800GT graphics card quite a long time ago now. It has never worked in his PC. Print out from a dxdiag: System Information Time of this report: 4/13/2010, 19:52:40 Machine name: USER-PC Operating System: Windows Vista™ Home Premium (6.0, Build 6001) Service Pack 1 (6001.vistasp1_gdr.091208-0542) Language: English (Regional Setting: English) System Manufacturer: To Be Filled By O.E.M. System Model: To Be Filled By O.E.M. BIOS: Default System BIOS Processor: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (4 CPUs), ~2.3GHz Memory: 2046MB RAM Page File: 1045MB used, 3296MB available Windows Dir: C:\Windows DirectX Version: DirectX 10 DX Setup Parameters: Not found DxDiag Version: 6.00.6001.18000 32bit Unicode DxDiag Notes Display Tab 1: No problems found. Sound Tab 1: No problems found. Sound Tab 2: No problems found. Sound Tab 3: No problems found. Input Tab: No problems found. DirectX Debug Levels Direct3D: 0/4 (retail) DirectDraw: 0/4 (retail) DirectInput: 0/5 (retail) DirectMusic: 0/5 (retail) DirectPlay: 0/9 (retail) DirectSound: 0/5 (retail) DirectShow: 0/6 (retail) Display Devices Card name: ATI Radeon HD 2400 PRO Manufacturer: ATI Technologies Inc. Chip type: ATI Radeon Graphics Processor (0x94C3) DAC type: Internal DAC(400MHz) Device Key: Enum\PCI\VEN_1002&DEV_94C3&SUBSYS_00000000&REV_00 Display Memory: 1012 MB Dedicated Memory: 245 MB Shared Memory: 767 MB Current Mode: 1280 x 960 (32 bit) (75Hz) Monitor: Generic PnP Monitor Driver Name: atiumdag.dll,atiumdva.dat,atitmmxx.dll Driver Version: 7.14.0010.0523 (English) DDI Version: 10 Driver Attributes: Final Retail Driver Date/Size: 8/22/2007 02:43:14, 3021312 bytes That info is from the current card that is installed in it and has been installed since its purchase roughly 3-4 years ago. When I physically install the card I put it into a purple slot on the motherboard that the old card was in (if I go into the device manager and select properties on the current card it confirms that the slot is a "PCI Slot 16 (PCI bus 2, device 0, function 0)") and boot up the computer but get absolutely no output. The screen that we have registers that it is connected to something (by not displaying the screen it does when the cable is unplugged) but just remains blank, no output at all. I recently took the card to my University and one of my friends who is better with hardware issues than I am tried it in his system and it worked perfectly. No issues whatsoever. I do not have a spec list for his system but I could get one if you need it. If you need any more information on this issue I will be happy to supply you with it as I am starting to get very annoyed with this problem ^_^

  Read the article

• Sysadmin 101: How can I figure out why my server crashes and monitor performance?

  - by bflora

  I have a Drupal-powered site that seems to have neverending performance problems. It was butt-slow about 5 months ago. I brought in some guys who installed nginx for anonymous visitors, ajaxified a few queries so they wouldn't fire during page load, and helped me find a few bottlenecks in the code. For about a month, the site was significantly faster, though not "fast" by any stretch of the word. Meanwhile, I'm now shelling out $400/month to Slicehost to host a site that gets less than 5,000/uniques a day. Yes, you read that right. Go Drupal. Recently the site started crashing again and is slow again. I can't afford to hire people to come in, study my code from top to bottom, and make changes that may or may not help anymore. And I can't afford to throw more hardware at the problem. So I need to figure out what the problem is myself. Questions: When apache crashes, is it possible to find out what caused it to crash? There has to be a way, right? If so, how can I do this? Is there software I can use that will tell me which process caused my server to die? (e.g. "Apache crashed because someone visited page X." or "Apache crashed because you were importing too many RSS items from feed X.") There's got to be a way to learn this, right? What's a good, noob-friendly way to monitor my current apache performance? My developer friends tell me to "just use Top, dude," but Top shows me a bunch of numbers without any context. I have no clue what qualifies as a bad number or a good number in Top, or which processes are relevant and which aren't. Are there any noob-friendly server monitoring tools out there? Ideally, I could have a page that would give me a color-coded indicator about how apache is performing and then show me a list of processes or pages that are sucking right now. This way, I could know when performance is bad and then what's causing it to be so bad. Why does PHP memory matter? My apparently has a 30MB memory foot print. Will it run faster if I bring that number down? Thanks for any advice. I spent a year or so trying to boost my advertising income so I could hire a contractor to solve my performance woes. I didn't want to have to learn all this sysadmin voodoo. I'm now resigned to the fact that might not have a choice.

  Read the article

• how to diagnosis and resolve: /usr/lib64/libz.so.1: no version information available

  - by matchew

  I had a hell of a time installing lxml for python2.7 on centOs5.6. For some background, python2.7 is an alternative installation of python on centOS5.6 which comes with python2.4 installed. it was bulit from source per its instrucitons ./configure make make altinstall However, after about 20 hours of trying I managed to find a workable solution and was able to install lxml. Until, I notice the following error at the top of the interpreter: python2.7: /usr/lib64/libz.so.1: no version information available (required by python2.7) Python 2.7.2 (default, Jun 30 2011, 18:55:26) [GCC 4.1.2 20080704 (Red Hat 4.1.2-50)] on linux2 Type "help", "copyright", "credits" or "license" for more information. >>> print 'Sheeeeut!' this error is printed out everytime I run a script. For example: $ ./test.py /usr/local/bin/python2.7: /usr/lib64/libz.so.1: no version information available (required by /usr/local/bin/python2.7) the script runs flawlessly, but this error is bothersome. After some digging I have seem to believe I have a wrong version of libz installed, that it is either an older version or built for a different platform. I'm not quite sure how, I've only installed libz through yum, as far as I know. Although, I can't quite remember every little thing I tried in my twenty hours of trying. You may also be intereted in what my lib64 folder looks like, here is some information $ ls -ltrh libz* -rwxr-xr-x 1 root root 84K Jan 9 2007 libz.so.1.2.3 -rwxr-xr-x 1 root root 107K Jan 9 2007 libz.a -rwxr-xr-x 1 root root 154K Feb 22 23:30 libzdb.so.7.0.2 lrwxrwxrwx 1 root root 13 Apr 20 20:46 libz.so.1 -> libz.so.1.2.3 lrwxrwxrwx 1 root root 15 Jun 30 18:43 libzdb.so.7 -> libzdb.so.7.0.2 lrwxrwxrwx 1 root root 13 Jul 1 11:35 libz.so -> libz.so.1.2.3 lrwxrwxrwx 1 root root 15 Jul 1 11:35 libzdb.so -> libzdb.so.7.0.2 notice: the items that Say Jul 1st or Jun 30th are from me. I had initially moved these files into a backup folder as they seeemed to be 1. duplicates and 2. had a date after/during my problems I alluded to earlier that I had with lxml One inclination is to completely remove python2.7 and re-install. I think having it install to /usr/local/ was a poor default choice. However, without the make uninstall option being present it seems to be a time consuming task for a solution I am not quite sure would solve my problem.

  Read the article

• HAProxy + Percona XtraDB Cluster

  - by rottmanj

  I am attempting to setup HAproxy in conjunction with Percona XtraDB Cluster on a series of 3 EC2 instances. I have found a few tutorials online dealing with this specific issue, but I am a bit stuck. Both the Percona servers and the HAproxy servers are running ubuntu 12.04. The HAProxy version is 1.4.18, When I start HAProxy I get the following error: Server pxc-back/db01 is DOWN, reason: Socket error, check duration: 2ms. I am not really sure what the issue could be. I have verified the following: EC2 security groups ports are open Poured over my config files looking for issues. I currently do not see any. Ensured that xinetd was installed Ensured that I am using the correct ip address of the mysql server. Any help with this is greatly appreciated. Here are my current config Load Balancer /etc/haproxy/haproxy.cfg global log 127.0.0.1 local0 log 127.0.0.1 local1 notice maxconn 4096 user haproxy group haproxy debug #quiet daemon defaults log global mode http option tcplog option dontlognull retries 3 option redispatch maxconn 2000 contimeout 5000 clitimeout 50000 srvtimeout 50000 frontend pxc-front bind 0.0.0.0:3307 mode tcp default_backend pxc-back frontend stats-front bind 0.0.0.0:22002 mode http default_backend stats-back backend pxc-back mode tcp balance leastconn option httpchk server db01 10.86.154.105:3306 check port 9200 inter 12000 rise 3 fall 3 backend stats-back mode http balance roundrobin stats uri /haproxy/stats MySql Server /etc/xinetd.d/mysqlchk # default: on # description: mysqlchk service mysqlchk { # this is a config for xinetd, place it in /etc/xinetd.d/ disable = no flags = REUSE socket_type = stream port = 9200 wait = no user = nobody server = /usr/bin/clustercheck log_on_failure += USERID #only_from = 0.0.0.0/0 # recommended to put the IPs that need # to connect exclusively (security purposes) per_source = UNLIMITED } MySql Server /etc/services Added the line mysqlchk 9200/tcp # mysqlchk MySql Server /usr/bin/clustercheck # GNU nano 2.2.6 File: /usr/bin/clustercheck #!/bin/bash # # Script to make a proxy (ie HAProxy) capable of monitoring Percona XtraDB Cluster nodes properly # # Author: Olaf van Zandwijk <[email protected]> # Documentation and download: https://github.com/olafz/percona-clustercheck # # Based on the original script from Unai Rodriguez # MYSQL_USERNAME="testuser" MYSQL_PASSWORD="" ERR_FILE="/dev/null" AVAILABLE_WHEN_DONOR=0 # # Perform the query to check the wsrep_local_state # WSREP_STATUS=`mysql --user=${MYSQL_USERNAME} --password=${MYSQL_PASSWORD} -e "SHOW STATUS LIKE 'wsrep_local_state';" 2>${ERR_FILE} | awk '{if (NR!=1){print $2}}' 2>${ERR_FILE}` if [[ "${WSREP_STATUS}" == "4" ]] || [[ "${WSREP_STATUS}" == "2" && ${AVAILABLE_WHEN_DONOR} == 1 ]] then # Percona XtraDB Cluster node local state is 'Synced' => return HTTP 200 /bin/echo -en "HTTP/1.1 200 OK\r\n" /bin/echo -en "Content-Type: text/plain\r\n" /bin/echo -en "\r\n" /bin/echo -en "Percona XtraDB Cluster Node is synced.\r\n" /bin/echo -en "\r\n" else # Percona XtraDB Cluster node local state is not 'Synced' => return HTTP 503 /bin/echo -en "HTTP/1.1 503 Service Unavailable\r\n" /bin/echo -en "Content-Type: text/plain\r\n" /bin/echo -en "\r\n" /bin/echo -en "Percona XtraDB Cluster Node is not synced.\r\n" /bin/echo -en "\r\n" fi

  Read the article

• Can't connect to shared folders anymore?

  - by HuskyHuskie

  My home server is running Windows Server 2008 R2. I've had it running for almost a year now without any issues with shared folders. This past week I had an issue with my modem which required it to be power cycled and with that I power cycled my router. After that I haven't been able to connect to my shared network folders. I have no idea why that would even cause an issue as I've power cycled my networking equipment in the past without issues and none of my settings appear to have been lost. I am mapping these drives on my Windows 7 Ultimate machine using "Map Network Drive", from there I enter \\SERVER\Storage as I'm trying to connect to my shared folder named Storage. I receive the following error every time I try mapping the drive: Windows cannot access \\Server\Storage Check the spelling of the name. Otherwise there might be a problem with your network. To try to identify and resolve network problems, click Diagnose. Details: Error code: 0x80070035 The network path was not found. When I click Diagnose I get the following: Problems found file and print sharing resource (SERVER) is online but isn't responding to connection attempts. The remote computer isn't responding to connection on port 445, possibly due to firewall or security policy settings, or because it might be temporarily unavailable. Windows couldn't find any problems with the firewall on your computer. I've tried this from multiple computers with the same issue too. To resolve the problems so far I've tried: Disabling the firewall on SERVER Reinstalling File Services Modifying NetBT\Parameters registry values Adding a custom inbound rule for port 445 Adding port forwarding on my router for port 445 Recreating the shared folders Checking and rechecking the shared folder permissions. Resetting my user account password on the server used to access the shared folder. I'm pulling my hair out with this problem mainly because it came out of nowhere. It was working fine the night before and the next day it just stopped working. Any ideas of what I could try next are much appreciated. It should also be noted that this server is used as a web server too and that functionality still works correctly.

  Read the article

• Too many TIME_WAIT state connections!

  - by Hamza

  I've been reading about this everywhere all day, and from what I've gathered, TIME_WAIT is a relatively harmless state. It's supposed to be harmless even when there's too many. But if they're jumping to the numbers I've been seeing for the past 24 hours, something is really wrong! [root@1 ~]# netstat -nat | awk '{print $6}' | sort | uniq -c | sort -n 1 established) 1 Foreign 12 CLOSE_WAIT 15 LISTEN 64 LAST_ACK 201 FIN_WAIT2 334 CLOSING 605 ESTABLISHED 816 SYN_RECV 981 FIN_WAIT1 26830 TIME_WAIT That number fluctuates from 20,000 to 30,000+ (so far, the maximum I've seen it go is 32,000). What worries me is that they're all different IP addresses from all sorts of random locations. Now this is supposed to be (or was supposed to be) a DDoS attack. I know this for a fact, but I won't go into the boring details. It started out as a DDoS and it did impact my server's performance for a couple minutes. After that, everything was back to normal. My server load is normal. My internet traffic is normal. No server resource is being abused. My sites load fine. I also have IPTABLES disabled. There's an odd issue with that too. Every time I enable the firewall/iptables, my server starts experiencing packet loss. Lots of it. About 50%-60% packets are lost. It happens within an hour or within a few hours of enabling the firewall. As soon as I disable it, ping responses from all locations I test them from start clearing up and get stable again. Very strange. The TIME_WAIT state connections have been fluctuating at those numbers since yesterday. For 24 hours now, I've had that, and although it hasn't impacted performance in any way, it's disturbing enough. My current tcp_fin_timeout value is 30 seconds, from the default 60 seconds. However, that seems to not help, at all. Any ideas, suggestions? Anything at all would be appreciated, really!

  Read the article

• Basic OpenVPN setup not working

  - by WalterJ89

  I am attempting to connect 2 win7 (x64+ x32) computers (there will be 4 in total) using OpenVPN. Right now they are on the same network but the intention is to be able to access the client remotely regardless of its location. The Problem I am having is I am unable to ping or tracert between the two computers. They seem to be on different subnets even though I have the mask set to 255.255.255.0. The server ends up as 10.8.0.1 255.255.255.252 and the client 10.8.0.6 255.255.255.252. And a third ends up as 10.8.0.10. I don't know if this a Windows 7 problem or something I have wrong in my config. Its a very simple set up, I'm not connecting two LANs. this is the server config (removed all the extra lines because it was too ugly) port 1194 proto udp dev tun ca keys/ca.crt cert keys/server.crt key keys/server.key # This file should be kept secret dh keys/dh1024.pem server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt client-to-client duplicate-cn keepalive 10 120 comp-lzo persist-key persist-tun status openvpn-status.log verb 6 this is the client config client dev tun proto udp remote thisdomainis.random.com 1194 resolv-retry infinite nobind persist-key persist-tun ca keys/ca.crt cert keys/client.crt key keys/client.key ns-cert-type server comp-lzo verb 6 Is there anything I missed in this? keys are all correct and the vpn's connect fine, its just the subnet or route issue. Thank You EDIT it seems on the server the openvpn-status.log has the routes for the client SERVER OpenVPN CLIENT LIST Updated,Wed May 19 18:26:32 2010 Common Name,Real Address,Bytes Received,Bytes Sent,Connected Since client,192.168.10.102:50517,19157,20208,Wed May 19 17:38:25 2010 ROUTING TABLE Virtual Address,Common Name,Real Address,Last Ref 10.8.0.6,client,192.168.10.102:50517,Wed May 19 17:38:56 2010 GLOBAL STATS Max bcast/mcast queue length,0 END Also this is from the client.log file: Which seems to be correct C:\WINDOWS\system32\route.exe ADD 10.8.0.0 MASK 255.255.255.0 10.8.0.5 Another EDIT 'route print' on the server shows the route: Destination Mask Gateway Interface 10.8.0.0 255.255.255.0 10.8.0.2 10.8.0.1 the same on the client shows 10.8.0.0 255.255.255.0 10.8.0.5 10.8.0.6 So the routes are there.. what can the problem be? Is there anything wrong with my configs? Why would OpenVPN be having problems communicating?

  Read the article

• pix 501, static route to d-link router (different subnet)

  - by ra170

  I have pix 501 cisco firewall with internal ip 192.168.10.1. I have connected d-link router (dir-655) to pix 501. The d-link router has internal ip 192.168.0.1 The picture would like something like that: |pix 501| has 192.168.10.1 ip |DIR-655| has 192.168.0.1 ip 1. |cable modem|----|pix 501|-------|DIR-655|-----PC 2. PC--------|pix 501|---------|DIR-655| | | |cable modem| When I'm on the wireless network (dir-655) with assigned ip of 192.168.0.x I can cross the subnet and connect to my firewall 192.168.10.1. (pic. 1) The problem is that if I'm on the 192.168.10.x network I can't connect to anything over at 192.168.0.x network. (pic.2) I've tried entering a static route like this: `route inside 192.168.0.0 255.255.255.0 192.168.10.1 1` I also tried assigning static ip to wan interface on DIR-655 to 192.168.10.30 and then tried this: route inside 192.168.0.0 255.255.255.0 192.168.10.30 1 But still, can't connect to 192.168.0.1 or anything on that subnet. Is there a way to setup a static route? Would adding a separate router between PIX 501 and DIR-655 help? I would think that static route like this should take care of it, but it doesn't. This is my route config and nat: (config)# sh route outside 0.0.0.0 0.0.0.0 (outside_IP) 1 DHCP static outside (outside_IP) 255.255.248.0 (outside_IP) 1 CONNECT static inside 192.168.0.0 255.255.255.0 192.168.10.1 1 OTHER static inside 192.168.10.0 255.255.255.0 192.168.10.1 1 CONNECT static or (route inside 192.168.0.0 255.255.255.0 192.168.10.30 1) (config)# sh nat nat (inside) 1 192.168.1.0 255.255.255.0 0 0 nat (inside) 1 192.168.10.0 255.255.255.0 0 0 nat (inside) 1 0.0.0.0 0.0.0.0 0 0 I ended up turning DIR-655 into an Access Point (turning off DHCP and pluging cable from PIX lan interface into one of the LAN interfaces on DIR-655, and leaving WAN port empty), that works as far as DIR-655 being on the same subnet now, and I can access every machine. However the question is, why can't I simply route between those two? would router between these two help? One of the reasons is, that the PIX 501 has only 10 licences, so now I'm using almost all of them. (I have few computers, iphones, ps3, print server, etc.) I would really appreciate some help! Thanks.

  Read the article

• How is DNS used by individual processes?

  - by atroon

  When resolving FQDNs or machine names to IP addresses on my local network (mycompany.internal) I can use dig on the command line (linux/mac) or nslookup (windows) to query the configured server and get a response. But trying to enter the FQDN or even just the machine name in a ping command or in a web browser results in 'Unknown Host' or DNS errors. Here's a sample, this one from the Mac: mac:~ atroon$ dig server.mycompany.internal ; <<>> DiG 9.6.0-APPLE-P2 <<>> server.mycompany.internal ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 5219 ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;server.mycompany.internal. IN A ;; ANSWER SECTION: server.mycompany.internal. 1200 IN A 172.16.254.36 ;; Query time: 0 msec ;; SERVER: 172.16.254.8#53(172.16.254.8) ;; WHEN: Wed Dec 16 11:39:15 2009 ;; MSG SIZE rcvd: 55 mac:~ atroon$ ping server.mycompany.internal<br> ping: cannot resolve server.mycompany.internal: Unknown host I cannot for the life of me figure this one out. The DNS server is a SBS 2003 box which handles AD, some file/print, etc for a small company network. This issue happens to me about three times a week, and when I'm connected to the local network directly, the same switch as the server even. I can make any connection I want with IP addresses, I just can't make DNS work. Additionally, at the same time I'm experiencing this, other users are fine, which makes me think it's a problem on my Mac. But what sort of problem? How can dig send a query and get a reply, and ping say 'unknown host'? I'm posting here vs. serverfault because I think this is a local problem not a server problem...but if anyone can point me at the server, I guess we'll head down the street a domain or two.

  Read the article

• Suggestions for splitting server roles amongst Hyper-V virtual servers / RAID6 or RAID10? / AppAssure

  - by Anon

  We have 2 Hyper-V hosts at present running 1 virtual server that was converted from a physical box running all roles. My plan is to split the roles over various virtual machines, upgrading to the latest software versions as I go, and use the backup server as a standby in case the main server fails. AppAssure backup software has a feature called Virtual Standby, so the VHD's can be ready to be fired up on the backup server if necessary. Off-site backups will be done via external USB drive for now. I'm just seeking some input/suggestions into how I'm planning to split the roles out amongst various virtual servers. Also, I'm curious how to setup the storage on the servers. We do not have any NAS's, SAN'S or any budget for this. What would the best RAID level be to use? I'm thinking either RAID6 (which is currently used) however I'm concerned about the write speeds, or RAID10 but again I'm worried that I can only lose 1 drive (from the same mirror) as opposed to any 2 with RAID6. I realise I have a hot swap for this, but what if a further drive fails during a rebuild? Is the write penalty of RAID6 worth the extra reliability over RAID10? Or will it be too slow with all the roles I am planning, therefore RAID10 is my only real option? The reason for the needed redundancy is I am the only technician and I'm not always on-site. Options I've considered: 1) 5 drives in RAID6 set, 200gb for host OS, rest for VM storage. 1 drive for hot swap - this is how it is currently setup 2) 4 drives in RAID10 set, 200gb for host OS, rest for VM storage. 2 drives for hot swap 3) 4 drives in RAID10 set for VM storage, 2 drives in RAID1 set for host OS. No drives for hot swap - While this is probably the best option with the amount of drives I have, I don't like the idea of having no hot swap 4) 3 drives in RAID6 set for VM storage, 2 drives in RAID1 set for host OS. 1 drive for hot swap All options give us enough storage capacity for our files, etc. We don't have any budget for extra drives or extra hot swap HD chassis for the servers. We have about 70 clients and about 150 users. MAIN SERVER Intel Xeon 5520 @ 2.27 GHz (2 processors) 16GB RAM 6 x 1TB Seagate Barracuda ES.2 Enterprise SATA drives Intel SRCSATAWB RAID controller Virtual machine workload using Hyper-V on Windows Server 2008 R2: DC01 - Active Directory Domain Controller / DNS server / Global catalog - 1GB RAM DC02 - Active Directory Domain Controller / DNS server / Global catalog - 1GB RAM Member Server - DHCP server, File server, Print server - 1GB RAM SCCM Member Server - 4GB RAM Third Party Software Member Server - A/V server, Ticketing software, etc - 4GB RAM Exchange 2007 - 4GB RAM - however we are probably migrating to a hosted solution, therefore freeing up resources BACKUP SERVER Intel Xeon E5410 @ 2.33GHz (2 processors) 16GB RAM 6 x 2TB WD RE4 SATA drives Intel SRCSASRB RAID controller Virtual machine workload using Hyper-V on Windows Server 2008 R2: AppAssure backup software - 8GB RAM

  Read the article

• Linux filesystem with inodes close on the disk

  - by pts

  I'd like to make the ls -laR /media/myfs on Linux as fast as possible. I'll have 1 million files on the filesystem, 2TB of total file size, and some directories containing as much as 10000 files. Which filesystem should I use and how should I configure it? As far as I understand, the reason why ls -laR is slow because it has to stat(2) each inode (i.e. 1 million stat(2)s), and since inodes are distributed randomly on the disk, each stat(2) needs one disk seek. Here are some solutions I had in mind, none of which I am satisfied with: Create the filesystem on an SSD, because the seek operations on SSDs are fast. This wouldn't work, because a 2TB SSD doesn't exist, or it's prohibitively expensive. Create a filesystem which spans on two block devices: an SSD and a disk; the disk contains file data, and the SSD contains all the metadata (including directory entries, inodes and POSIX extended attributes). Is there a filesystem which supports this? Would it survive a system crash (power outage)? Use find /media/myfs on ext2, ext3 or ext4, instead of ls -laR /media/myfs, because the former can the advantage of the d_type field (see in the getdents(2) man page), so it doesn't have to stat. Unfortunately, this doesn't meet my requirements, because I need all file sizes as well, which find /media/myfs doesn't print. Use a filesystem, such as VFAT, which stores inodes in the directory entries. I'd love this one, but VFAT is not reliable and flexible enough for me, and I don't know of any other filesystem which does that. Do you? Of course, storing inodes in the directory entries wouldn't work for files with a link count more than 1, but that's not a problem since I have only a few dozen such files in my use case. Adjust some settings in /proc or sysctl so that inodes are locked to system memory forever. This would not speed up the first ls -laR /media/myfs, but it would make all subsequent invocations amazingly fast. How can I do this? I don't like this idea, because it doesn't speed up the first invocation, which currently takes 30 minutes. Also I'd like to lock the POSIX extended attributes in memory as well. What do I have to do for that? Use a filesystem which has an online defragmentation tool, which can be instructed to relocate inodes to the the beginning of the block device. Once the relocation is done, I can run dd if=/dev/sdb of=/dev/null bs=1M count=256 to get the beginning of the block device fetched to the kernel in-memory cache without seeking, and then the stat(2) operations would be fast, because they read from the cache. Is there a way to lock those inodes and/or blocks into memory once they have been read? Which filesystem has such a defragmentation tool?

  Read the article

• open source knowledge base CMS system

  - by Thomi

  I'm looking for an open source knowledge base system that uses tags, rather than free-text search to identify articles (a lot like serverfault does). I've looked at twiki, which many people suggested, but haven't found what I'm looking for. Basically I want to be able to create and tag articles, and provide an easy way for anonymous users to search based on tags. Edit: OK, here's some more detail regarding what I want. Basically, all the knowledge base systems I have seen so far are a collection of articles, each article with a title. Most of them allow you to categorise articles into groups and sub-groups. Users of the system can search for information using a title search, for example "How do I print from AwesomeProduct?" - which then shows a list of any articles that match that search text. This is fine and dandy when your KB is for one version of the software product (the mythical AwesomeProduct ver 1.0). However, the development team then go ahead and create a new version (ver 2.0) that adds many new features and changes some existing features. Now, how do we support both products in the same KB? The Naive method is to copy all articles from 1.0, and update them for 2.0, adding and removing articles in 2.0 as required. We can then add text at the top of every 1.0 article that says: "this articles applies to 1.0 only, to see the 2.0 version, click here" (or something similar) The problem with articles being indexed in the system by title is that it's very hard to filter based on meta-data like version. What happens when we create version 3.0 or 4.0? The end-situation here is that you have a mess of articles. They're hard to search, hard to filter, and even harder to manage. The solution (it seems to me) is to use tags, rather than text as the article index mechanism. So articles can be tagged with a tag representing the software version, topic area etc. etc. Users can then filter based on tag - an example search might be "version_1 printing" - which straight away gives a list of articles with all these tags. So that's what I'm looking for - a KB system that uses tags, rather than text to index many articles. I'm sure I could build something with drupal, but I was hoping for something that worked out-of-the-box.

  Read the article

• 2xAMD Opteron 6128 with libvirt, Physical CPU 13 doesn't exist

  - by yak

  I need help with libvirt(?) problem. Server specs: ProLiant DL165 G7 2x AMD Opteron(tm) Processor 6128 System: Debian GNU/Linux testing (wheezy) 3.2.0-3-amd64 libvirt 0.9.12-5 kvm 1:1.1.2+dfsg-2 $ grep processor /proc/cpuinfo | wc -l 16 $ virsh nodeinfo setlocale: No such file or directory CPU model: x86_64 CPU(s): 16 CPU frequency: 800 MHz CPU socket(s): 2 Core(s) per socket: 4 Thread(s) per core: 1 NUMA cell(s): 1 Memory size: 66114200 KiB $ virsh capabilities .. <topology> <cells num='4'> <cell id='0'> <cpus num='4'> <cpu id='0'/> <cpu id='1'/> <cpu id='2'/> <cpu id='3'/> </cpus> </cell> <cell id='1'> <cpus num='4'> <cpu id='4'/> <cpu id='5'/> <cpu id='6'/> <cpu id='7'/> </cpus> </cell> <cell id='2'> <cpus num='4'> <cpu id='12'/> <cpu id='13'/> <cpu id='14'/> <cpu id='15'/> </cpus> </cell> <cell id='3'> <cpus num='4'> <cpu id='8'/> <cpu id='9'/> <cpu id='10'/> <cpu id='11'/> </cpus> </cell> </cells> </topology> .. $ virsh vcpupin vm 0 13,12,11,10,9,8,7,6,5 error: Physical CPU 13 doesn't exist. error: cpulist: Invalid format. Question? Why my VM Guests use only first 8 CPUs and next 8 are idling? $ for host in virsh list | awk '{print $2}'; do virsh vcpuinfo $host; done | grep ^CPU: | sort | uniq CPU: 0 CPU: 1 CPU: 2 CPU: 3 CPU: 4 CPU: 5 CPU: 6 CPU: 7 Any ideas how to change it?

  Read the article

• Nagios core Event Handler not working

  - by sivashanmugam

  Nagios Event Handler is not triggering when the service is taking more time to response or down. My configuration in below nagios.cfg enable_event_handlers=1 localhost.cfg define service { use generic-service host_name Server service_description test-server servicegroups test-service check_command check-service is_volatile 0 check_period 24x7 max_check_attempts 4 normal_check_interval 2 retry_check_interval 2 contact_groups testcontacts notification_period 24x7 notification_options w,u,c,r notifications_enabled 1 event_handler_enabled 1 event_handler recheck-service } command.cfg define command{ command_name recheck-service command_line /usr/local/nagios/libexec/alert.sh $SERVICESTATE$ $SERVICESTATETYPE$ $SERVICEATTEMPT$ } alert.sh file !/bin/sh set -x case "$1" in OK) # The service just came back up, so don't do anything... ;; WARNING) # We don't really care about warning states, since the service is probably still running... ;; UNKNOWN) # We don't know what might be causing an unknown error, so don't do anything... ;; CRITICAL) Aha! The HTTP service appears to have a problem - perhaps we should restart the server... Is this a "soft" or a "hard" state? case "$2" in We're in a "soft" state, meaning that Nagios is in the middle of retrying the check before it turns into a "hard" state and contacts get notified... SOFT) # What check attempt are we on? We don't want to restart the web server on the first check, because it may just be a fluke! case "$3" in Wait until the check has been tried 3 times before restarting the web server. If the check fails on the 4th time (after we restart the web server), the state type will turn to "hard" and contacts will be notified of the problem. Hopefully this will restart the web server successfully, so the 4th check will result in a "soft" recovery. If that happens no one gets notified because we fixed the problem! 3) echo -n "Going To Ping the Virtual Machine (3rd soft critical state)..." # Call the init script to restart the HTTPD server myresult=`/usr/local/nagios/libexec/check_http xyz.com -t 100 | grep 'time'| awk '{print $10}'` echo "Your Service Is taking the following time Delay" "$myresult Seconds" |mail -s "WARNING : Service Taken More Time To Response" [email protected] ;; esac ;; # The HTTP service somehow managed to turn into a hard error without getting fixed. # It should have been restarted by the code above, but for some reason it didn't. # Let's give it one last try, shall we? # Note: Contacts have already been notified of a problem with the service at this

  Read the article

• UNIX Question to b answered??? [closed]

  - by Nits

  Create a tree structure named ‘training’ in which there are 3 subdirectories – ‘level 1’,’ level2’ and ‘cep’. Each one is again further divided into 3. The ‘level 1’ is divided into ‘sdp’, ‘re’ and ‘se’. From the subdirectory ‘se’ how can one reach the home directory in one step and also how to navigate to the subdirectory ‘sdp’ in one step? Give the commands, which do the above actions? How will you copy a directory structure dir1 to dir2 ? (with all the subdirectories) How can you find out if you have the permission to send a message? Find the space occupied ( in Bytes) by the /home directory including all its subdirectories. What is the command for printing the current time in 24-hour format? What is the command for printing the year, month, and date with a horizontal tab between the fields? Create the following files: chapa, chapb, chapc, chapd, chape, chapA, chapB, chapC, chapD, chapE, chap01, chap02, chap03, chap04, chap05, chap11, chap12, chap13, chap14, and chap15. With reference to question 7, What is the command for listing all files ending in small letters? With reference to question 7, What is the command for listing all files ending in capitals? With reference to question 7, What is the command for listing all files whose last but one character is 0? With reference to question 7, What is the command for listing all files which end in small letters but not ‘a’ and ‘c’? In an organisation one wants to know how many programmers are there. The employee data is stored in a file called ‘personnel’ with one record per employee. Every record has field for designation. How can grep be used for this purpose? In the organisation mentioned in question 12 how can sed be used to print only the records of all employees who are programmers. In the organisation mentioned in question 12 how can sed be used to change the designation ‘programmer’ to ‘software professional’ every where in the ‘personnel’ file Find out about the sleep command and start five jobs in the background, each one sleeping for 10 minutes. How do you get the status of all the processes running on the system? i.e. using what option?

  Read the article

• Exchange-Server Query

  - by Rudi Kershaw

  First, a little background. I've recently been taken on as a web and software developer for a small company, who has no other in-house IT support. They've been asking my opinion on lots of IT subjects that are quite far out of my comfort zone. I'm definitely not a network admin. Their IT consultancy contractor is pushing them to upgrade their dedicated exchange server, even though it seems like the one they currently have has a lot of life left in it and is running problem free. They say it's "coming to the natural end of it's life". They want to install a monster with a Xeon E5-2420, 32GB RAM, 2x 1TB HDDs, Windows Server 2012 and Microsoft Exchange 2010. They want to charge a small fortune for it. Basically, this system seems massively over the top seeing as it won't be doing anything else other than running as an exchange server for a company with less than 25 email accounts. My employers also have a file server system in-house that hosts three web apps, an SQL server, their local domain, print server and shared folders. That machine is using the same specs as the proposed new one, and it is barely using any of it's potential. I asked if Microsoft Exchange 2010 could be installed on their file server, but they said that MS Exchange can't run on the same system as an SQL server because for some reason they will eat up each others resources (even though the SQL server isn't touching 1% of the current system's CPU or RAM). My question is really, are they trying to rip my employers off? Could MS Exchange be installed on their other server (on a virtual instance or not), or does the old one even need replacing at all? Going with their current suggestion will cost the company in excess of £6k, and it seems entirely unnecessary. I apologies, because I know this is probably a little thin on details, but if I carry on I could end up writing a massive essay that no-one will want to read. I've been doing my research, but I'm not knowledgeable enough make any hard decisions. Let me know if you need any more details. Thank you for any help you can offer. Further Details: The new exchange would need to support Outlook Web App, 25 users, a few public mailboxes, and email exchange with Blackberries.

  Read the article

• Why is Windows 7 not following all routes?

  - by GigabyteProductions

  My computer is connected to my secondary router that's running the 192.168.42.0/24 network and my computer also has a route that directs anything on that network to the router, but for anything on that network other than the router itself, it get's the ICMP response of Reply from 192.168.42.194: Destination host unreachable. (with 192.168.42.194 being my computer). Every other network works, like all of the internet, or addresses on my primary router like 192.168.1.*, just not on the 192.168.42.0/24 network... route print returns: IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.42.1 192.168.42.194 276 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.42.0 255.255.255.0 On-link 192.168.42.194 276 192.168.42.194 255.255.255.255 On-link 192.168.42.194 276 192.168.42.255 255.255.255.255 On-link 192.168.42.194 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.42.194 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.42.194 276 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 0.0.0.0 0.0.0.0 192.168.42.1 Default =========================================================================== The only time anything is supposed to send an ICMP Host Unreachable response is when there's no route to it, right? So, why is my own computer sending that to ping or tracert when I have the route of 192.168.42.0 with the mask of 255.255.255.0? An IP address of 192.168.42.2 surely fits into that route. If I explicitly add a route for the IP address i am trying to access, it works, like: route add 192.168.42.2 mask 255.255.255.255 192.168.42.1 (the 192.168.42.1 right after mask is gateway, or the device to send the packet to so it can route it further), but why wont it work for the implicit route that's automatically on the table? I disabled my firewall, too (I use Comodo if anyone thinks this still serves as a problem). I'v even tried explicitly adding the gateway of 192.168.42.1 to the 192.168.42.0/24 route instead of it routing through 0.0.0.0's gateway, which is what On-link does. but that didn't work either, so it's not a gateway specification problem. If the host was really unreachable, it would be the router's IP address (192.168.42.1) sending that to me... This network is all of my creation, so there's no problem such as an administrator locking me out, because i am the administrator.

  Read the article

• Create text file named after a cell containing other cell data

  - by user143041

  I tried using the code below for the Excel program on my `Mac Mini using the OS X Version 10.7.2 and it keeps saying Error due to file name / path: (The Excel file I am creating is going to be a template with my formulas and macros installed which will be used over and over). Sub CreateFile() Do While Not IsEmpty(ActiveCell.Offset(0, 1)) MyFile = ActiveCell.Value & ".txt" fnum = FreeFile() Open MyFile For Output As fnum Print #fnum, ActiveCell.Offset(0, 1) & " " & ActiveCell.Offset(0, 2) Close #fnum ActiveCell.Offset(1, 0).Select Loop End Sub What Im trying to do: 1st Objective I would like to have the following data to be used to create a text file. A:A is what I need the name of the file to be. B:2 is the content I need in the text file. So, A2 - "repair-video-game-Glassboro-NJ-08028.txt" is the file name and B2 to be the content in the file. Next, A3 is the file name and B3 is the content for the file, etc. ONCE the content reads what is in cell A16 and B16 (length will vary), the file creation should stop, if not then I can delete the additional files created. This sheet will never change. Is there a way to establish the excel macro to always go to this sheet instead of have to select it with the mouse to identify the starting point? 2nd Objective I would like to have the following data to be used to create a text file. A:1 is what I need the name of the file to be. B:B is the content I want in the file. So, A2 - is the file name "geo-sitemap.xml" and B:B to be the content in the file (ignore the .xml file extension in the photo). ONCE the content cell reads what is in cell "B16" (length will vary), the file creation should stop, if not then I can adjust the cells that have need content (formulated content you see in the image is preset for 500 rows). This sheet will never change. Is there a way to establish the excel macro to always go to this sheet instead of have to select it with the mouse to identify the starting point? I can Provide the content in the cells that are filled in by excel formulas that are not not to be included in the .txt files. It is ok if it is not possible. I can delete the extra cells that are not populated (based on the data sheet). Please let me know if you need any more additional information or clarity and I will be happy to provide it.

  Read the article

• Top 20 Daily Deal Sites In India

  - by Damodhar

  If you have never heard of Groupon recently, you probably are not working in the tech industry because it is all over the blogosphere. After all, growing from zero to US$1.35 billion valuation in 18 months is pretty AMAZING. Inspired by this, the following bunch of Groupon clone’s are already rising in India. Definitely this business model is emerging and changes the way online shopping happens in India. SnapDeal SnapDeal features a Best deals Coupons at an unbeatable price on the best stuff to do, see, eat, and buy in our city. It provides vouchers and discounts in all the major cities like Delhi, Mumbai, Chennai and Bangalore. KhojGuru Exclusive Discount coupons from hundreds of brands and retailers. These discounts can be easily downloaded as an SMS on to the mobile phone or their print out can be taken. MyDala A platform which gets us great deals in our city.Leveraging the “power of group buying”. Group buying happens when like minded people come together to get deals that we can never get on our own as individuals. SoSasta Great place which would not only tell us about the hidden treasures of our city — but also made them affordable to us at the end of the month. DealsAndYou Deals and You is a group buying portal that features a daily deal on the best stuff in some of India’s leading cities. AajKaCatch Its concept is to provide you the most unique, useful and qualitative product at a very low price. So you can now shop without the hassles of clustered products. BindassBargain Bindaas Bargain offers a new deal every day! Great stuff ranging from cool gadgets, home theatres, luxury watches, smash games. MasthiDeals It get you a great deal on a great stuff to do, eat, buy or see in your city. They have a team of about 25 wonderful people working in Chennai office working side by side with folks in MasthiDeal’s other cities. Koovs Founded by a team of IIT alumni who have brought in their expertise from the internet industry. Koovs is a Bangalore based start up and one point solution for all your desires. Taggle It brings you a variety of offers from some of the most respected brands in the country.This website uses collective buying to create a win-win for local businesses and their customers. BuzzInTown Buzzintown.com is a portal owned by Wortal Inc. There are a US headquartered company, with a presence pan-India through their India subsidiary, managed by a vastly experienced set of global leaders from the media, entertainment and technology industries. BuyThePrice It lines up the best win – win deals for both consumers and vendors and also ensures that each of the orders are dispatched in the shortest time possible. 24HoursLoot 24hoursLoot is an online store for selling a new t-shirt (sometime other products) everyday at deep discounted price in limited quantity/stock. DealMagic Customers get exposure to the best their city has to offer, at unbeatable prices (50-90% off).  We never feature more than one business on our website on any given day, so we have to be very very selective on who gets featured. Dealivore ICUMI Technologies Pvt Ltd is the company operating the Dealivore service. Founded in December 2009, ICUMI is privately owned and funded. LootMore An online store that exclusively focuses on selling cool quality stuff at cheap prices. Here you’ll always find the latest and greatest brands at prices you can afford. Foodome The deals features the best coupons at an unbeatable price on restaurants, fine dining on where to spend your birthday party.They provide coupon only in Chennai as of now. Top Online Shopping Sites- Nation Wide ebay.in eBay is The World’s Online Marketplace, enabling trade on a local, national and international basis. With a diverse and passionate community of individuals and small businesses, eBay offers an online platform where millions of items are traded each day. FutureBazzar Future Group, led by its founder and Group CEO, Mr. Kishore Biyani, is one of India’s leading business houses with multiple businesses spanning across the consumption space. TradeUs Launched in July 2009 and in a short span of time it has turned into one of India’s foremost shopping portals setting the Indian e-commerce abode aflame. BigShoeBazzar (BSB) is the largest online authorized shoe store in South Asia. Croma Promoted by Infiniti Retail Ltd, a 100% subsidiary of Tata Sons.One of the world’s leading retailers, ensuring that you buy nothing but the best. This article titled,Top 20 Daily Deal Sites In India, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

  Read the article

• SQL SERVER – Beginning SQL Server: One Step at a Time – SQL Server Magazine

  - by pinaldave

  I am glad to announce that along with SQLAuthority.com, I will be blogging on the prominent site of SQL Server Magazine. My very first blog post there is already live; read here: Beginning SQL Server: One Step at a Time. My association with SQL Server Magazine has been quite long, I have written nearly 7 to 8 SQL Server articles for the print magazine and it has been a great experience. I used to stay in the United States at that time. I moved back to India for good, and during this process, I had put everything on hold for a while. Just like many things, “temporary” things become “permanent” – coming back to SQLMag was on hold for long time. Well, this New Year, things have changed – once again, I am back with my online presence at SQLMag.com. Everybody is a beginner at every task or activity at some point of his/her life: spelling words for the first time; learning how to drive for the first time, etc. No one is perfect at the start of any task, but every human is different. As time passes, we all develop our interests and begin to study our subject of interest. Most of us dream to get a job in the area of our study – however things change as time passes. I recently read somewhere online (I could not find the link again while writing this one) that all the successful people in various areas have never studied in the area in which they are successful. After going through a formal learning process of what we love, we refuse to stop learning, and we finally stop changing career and focus areas. We move, we dare and we progress. IT field is similar to our life. New IT professionals come to this field every day. There are two types of beginners – a) those who are associated with IT field but not familiar with other technologies, and b) those who are absolutely new to the IT field. Learning a new technology is always exciting and overwhelming for enthusiasts. I am working with database (in particular) for SQL Server for more than 7 years but I am still overwhelmed with so many things to learn. I continue to learn and I do not think that I should ever stop doing so. Just like everybody, I want to be in the race and get ahead in learning the technology. For the same, I am always looking for good guidance. I always try to find a good article, blog or book chapter, which can teach me what I really want to learn at this stage in my career and can be immensely helpful. Quite often, I prefer to read the material where the author does not judge me or assume my understanding. I like to read new concepts like a child, who takes his/her first steps of learning without any prior knowledge. Keeping my personal philosophy and preference in mind, I will be blogging on SQL Server Magazine site. I will be blogging on the beginners stuff. I will be blogging for them, who really want to start and make a mark in this area. I will be blogging for all those who have an extreme passion for learning. I am happy that this is a good start for this year. One of my resolutions is to help every beginner. It is totally possible that in future they all will grow and find the same article quite ‘easy‘ – well when that happens, it indicates the success of the article and material! Well, I encourage everybody to read my SQL Server Magazine blog – I will be blogging there frequently on various topics. To begin, we will be talking about performance tuning, and I assure that I will not shy away from other multiple areas. Read my SQL Server Magazine Blog: Beginning SQL Server: One Step at a Time I think the title says it all. Do leave your comments and feedback to indicate your preference of subject and interest. I am going to continue writing on subject, and the aim is of course to help grow in this field. Reference : Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Optimization, SQL Performance, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority News, T SQL, Technology

  Read the article

• Parallelism in .NET – Part 13, Introducing the Task class

  - by Reed

  Once we’ve used a task-based decomposition to decompose a problem, we need a clean abstraction usable to implement the resulting decomposition.  Given that task decomposition is founded upon defining discrete tasks, .NET 4 has introduced a new API for dealing with task related issues, the aptly named Task class. The Task class is a wrapper for a delegate representing a single, discrete task within your decomposition.  We will go into various methods of construction for tasks later, but, when reduced to its fundamentals, an instance of a Task is nothing more than a wrapper around a delegate with some utility functionality added.  In order to fully understand the Task class within the new Task Parallel Library, it is important to realize that a task really is just a delegate – nothing more.  In particular, note that I never mentioned threading or parallelism in my description of a Task.  Although the Task class exists in the new System.Threading.Tasks namespace: Tasks are not directly related to threads or multithreading. Of course, Task instances will typically be used in our implementation of concurrency within an application, but the Task class itself does not provide the concurrency used.  The Task API supports using Tasks in an entirely single threaded, synchronous manner. Tasks are very much like standard delegates.  You can execute a task synchronously via Task.RunSynchronously(), or you can use Task.Start() to schedule a task to run, typically asynchronously.  This is very similar to using delegate.Invoke to execute a delegate synchronously, or using delegate.BeginInvoke to execute it asynchronously. The Task class adds some nice functionality on top of a standard delegate which improves usability in both synchronous and multithreaded environments. The first addition provided by Task is a means of handling cancellation via the new unified cancellation mechanism of .NET 4.  If the wrapped delegate within a Task raises an OperationCanceledException during it’s operation, which is typically generated via calling ThrowIfCancellationRequested on a CancellationToken, or if the CancellationToken used to construct a Task instance is flagged as canceled, the Task’s IsCanceled property will be set to true automatically.  This provides a clean way to determine whether a Task has been canceled, often without requiring specific exception handling. Tasks also provide a clean API which can be used for waiting on a task.  Although the Task class explicitly implements IAsyncResult, Tasks provide a nicer usage model than the traditional .NET Asynchronous Programming Model.  Instead of needing to track an IAsyncResult handle, you can just directly call Task.Wait() to block until a Task has completed.  Overloads exist for providing a timeout, a CancellationToken, or both to prevent waiting indefinitely.  In addition, the Task class provides static methods for waiting on multiple tasks – Task.WaitAll and Task.WaitAny, again with overloads providing time out options.  This provides a very simple, clean API for waiting on single or multiple tasks. Finally, Tasks provide a much nicer model for Exception handling.  If the delegate wrapped within a Task raises an exception, the exception will automatically get wrapped into an AggregateException and exposed via the Task.Exception property.  This exception is stored with the Task directly, and does not tear down the application.  Later, when Task.Wait() (or Task.WaitAll or Task.WaitAny) is called on this task, an AggregateException will be raised at that point if any of the tasks raised an exception.  For example, suppose we have the following code: Task taskOne = new Task( () => { throw new ApplicationException("Random Exception!"); }); Task taskTwo = new Task( () => { throw new ArgumentException("Different exception here"); }); // Start the tasks taskOne.Start(); taskTwo.Start(); try { Task.WaitAll(new[] { taskOne, taskTwo }); } catch (AggregateException e) { Console.WriteLine(e.InnerExceptions.Count); foreach (var inner in e.InnerExceptions) Console.WriteLine(inner.Message); } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Here, our routine will print: 2 Different exception here Random Exception! Note that we had two separate tasks, each of which raised two distinctly different types of exceptions.  We can handle this cleanly, with very little code, in a much nicer manner than the Asynchronous Programming API.  We no longer need to handle TargetInvocationException or worry about implementing the Event-based Asynchronous Pattern properly by setting the AsyncCompletedEventArgs.Error property.  Instead, we just raise our exception as normal, and handle AggregateException in a single location in our calling code.

  Read the article

< Previous Page | 324 325 326 327 328 329 330 331 332 333 334 335  | Next Page >