Search Results

Search found 19703 results on 789 pages for 'virtual ip'.

Page 328/789 | < Previous Page | 324 325 326 327 328 329 330 331 332 333 334 335  | Next Page >

• Unable to outside access service from inside LAN

  - by erotsppa

  I have a weird port forwarding problem. I tried to open my port 22 to the outside network. I was able to access it as long as I am not inside the LAN. I can access it from my office for example. But from within the LAN, I can access the port using the local ip, but I can't access the port using the external IP. It's as if the router is blocking the loopback. I've check all my router settings, turned off anything firewall/filtering related. Any ideas?

  Read the article

• Slow IE8 Start-up due to LDAP DNS queries

  - by MikeJ-UK

  Recently (in the last few days), my installation of IE8 has been taking 15 to 20 seconds to load my home page. Specifically, the sequence of events (as reported by WireShark) is:- Browser issues a DNS A query to resolve the home page server's IP address. Browser then spends the next 15-20 seconds broadcasting DNS SRV _LDAP._TCP queries, (roughly on a 2 second tick) to which it receives no answer (we have no LDAP servers). Browser re-issues the DNS A query and resolves the server's IP address again. Finally, the browser issues an HTTP GET for the home page. Does anyone know why this is happening? Possibly related to this question EDIT: @Massimo, LDAP query is :- Domain Name System (query) Transaction ID: 0x11c5 Flags: 0x0100 (Standard query) Questions: 1 Answer RRS: 0 Authority RRS: 0 Additional RRS: 0 Queries _LDAP._TCP: type SRV, class IN Name: _LDAP._TCP Type: SRV (Service location) Class: IN (0x0001)

  Read the article

• www.domain.com and domain.com records in microsoft dns

  - by captainmish

  Hello Apologies if this is already answered, its a tricky one to search for! We are using split DNS for a domain used internally. For the outside nameservers, theres a simple zone with: @ IN A ip.ad.dr.ess www IN A ip.ad.re.ss This works fine externally. Internally its a windows server 2003 DNS server, so the www a record works fine, but I cant figure out how to add that primary record (using at symbol @ in bind). Can anyone help with how to get the same results from windows dns? I just want to be able to add a record for domain.com without being forced to use something.domain.com Thanks, Edit: This domain is not the "main" AD domain, and not used for logins etc.

  Read the article

• Allow and restrict remote sql server access

  - by Michel

  Hi, I want to expose my sql server instance via the internet. I've been programming asp.net to sql server for a long time, but for the first time i'm hosting the sql server myself instead of the clients server. So what i want to do is move my sql server from my dev machine at home to a virtual server (yet to hire). But of course i don't want anyone to just enter my sql server but just a few persons. So what i was thinking was to allow only a few ip addresses to the sql server instance. Can anyone tell me how i can expose my sql server to the internet and limit the access to the instance to only a few ip addresses? And ehm, if you know even better ways to secure it, i'd be happy, because this is the first time for me :) Michel

  Read the article

• Strange request - http://66.196.81.202/error/vote

  - by mplungjan

  Hi a friend of mine is asking about the request which can for example be found here: http://www.geoidee.ch/geodata/geoserver-2.0.0/logs/2010_11_23.request.log His original message: On a couple of hundred web sites worldwide, one of the 50 most popular "File not found" error 404 is caused by the following request: "GET http://66.196.81.202/error/vote HTTP/1.0" It originates from a user agent that purports to be an iPhone. The two requests that hit my servers appeared to originate near Frankfort, Germany. The IP address in the request is part of Yahoo although I doubt that Yahoo had any intentional part. fe1.buzz.vip.re1.yahoo.com The HTTP request has a host header 66.196.81.202 and a X-Forwarded-For of 96.6.99.16 and my IP address I expected to be able to do a Google search and find some kind of security bulletin on it, but I found nothing. It could just be that my search skills are deficient. Thanks for any pointers to what this could be

  Read the article

• Forwarding port 3306 on Mac OS X in order to connect to a remote MySQL Database

  - by Jonathan Mayhak

  I'm on Mac OS X 10.6.2 trying to connect to ubuntu server 8.04.1 at linode. ssh -L 127.0.0.1:3306:[[remote ip]]:3306 user@server -N I want to set up ssh tunneling so that I can access a remote mysql server. First of all, I'm told bind: Address already in use. This is only after I've tried the command before. How do I manually close a port forwarding session? Second, when I change the command to be ssh -L 127.0.0.1:3310:[[remote ip]]:3306 user@server -N (I changed the local port to listen on). I'm told channel 1: open failed: connect failed: Connection refused when I try to connect to the MySQL server via MySQL workbench or sequel pro. To connect through MySQL workbench I use the following settings: host: 127.0.0.1 port: 3310 (if 3306 is in use) username: mysql username password: mysql password database: I don't put anything in

  Read the article

• ubuntu: sending mail with postfix?

  - by ajsie

  i've got some questions about how it works: so ubuntu server comes with postfix installed. if i want my php script to send a mail to lets say [email protected], how does it work? do i have to specify any ip to another MTA (my ISP's MTA?) in postfix's configuration file? and if someone sends back, will it get to my ip? is it postfix that receives it? or has it to do with fetchmail?

  Read the article

• how to stop outgoing email spam

  - by James

  running an email system using roundcube, with about 200 people using it. 99% of them do as they are told and only email clients they have already spoken to, however 1% of them decide to bulk spam bcc emails, which then tripped an aol filter and almost got us banned from our host. I have disabled the guys account but I am worried about something similar happening in the future, what would be the best way to stop this? I read that if aol recieve 3 emails within 60 seconds from the same ip address then its an instant ban, so i am guessing with the big companies like google, their email accounts must have different ip addresses? and if so is there any way to implement a similar feature? Also i have spam assasin enabled, in this case what would be the best configuration for it?

  Read the article

• l2tp server always 'sent [CCP ResetReq id=0x3]' when got compressed data request

  - by wilbur

  I have built a xl2tpd/ipsec server on my ubuntu 12.04.3, and I managed to make a l2tp vpn connection to the xl2tpd server from my android phone. The xl2tpd log said xl2tpd[10828]: Enabling IPsec SAref processing for L2TP transport mode SAs xl2tpd[10828]: IPsec SAref does not work with L2TP kernel mode yet, enabling forceuserspace=yes xl2tpd[10828]: setsockopt recvref[22]: Protocol not available xl2tpd[10828]: This binary does not support kernel L2TP. xl2tpd[10828]: xl2tpd version xl2tpd-1.2.8 started on atime.me PID:10828 xl2tpd[10828]: Written by Mark Spencer, Copyright (C) 1998, Adtran, Inc. xl2tpd[10828]: Forked by Scott Balmos and David Stipp, (C) 2001 xl2tpd[10828]: Inherited by Jeff McAdams, (C) 2002 xl2tpd[10828]: Forked again by Xelerance (www.xelerance.com) (C) 2006 xl2tpd[10828]: Listening on IP address 0.0.0.0, port 1701 xl2tpd[10828]: control_finish: Peer requested tunnel 39154 twice, ignoring second one. xl2tpd[10828]: Connection established to 117.136.8.59, 43149. Local: 25339, Remote: 39154 (ref=0/0). LNS session is 'default' However I cannot access the web in my browser. The pppd log said rcvd [Compressed data] 00 1d 82 c4 7c 04 d8 09 ... sent [CCP ResetReq id=0x7] I have googled a lot and found that this was mostly caused by a mppe decompression error. I have disabled BSD-Compress compression with nobsdcomp in /etc/ppp/xl2tpd-options but it did not work. I used openswan-2.6.33 and xl2tpd-1.2.8 which were built from source. And my configurations: /etc/ipsec.conf version 2.0 config setup nat_traversal=yes virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12 oe=off protostack=netkey conn L2TP-PSK-NAT rightsubnet=vhost:%priv also=L2TP-PSK-noNAT conn L2TP-PSK-noNAT authby=secret pfs=no auto=add keyingtries=3 rekey=no ikelifetime=8h keylife=1h type=transport left=106.186.121.214 leftprotoport=17/1701 right=%any rightprotoport=17/%any /etc/xl2tpd/xl2tpd.conf [global] ipsec saref = yes [lns default] local ip = 10.10.11.1 ip range = 10.10.11.2-10.10.11.245 refuse chap = yes refuse pap = yes require authentication = yes ppp debug = yes pppoptfile = /etc/ppp/xl2tpd-options length bit = yes /etc/ppp/xl2tpd-options require-mschap-v2 ms-dns 8.8.8.8 ms-dns 8.8.4.4 asyncmap 0 auth crtscts lock hide-password modem name l2tpd proxyarp lcp-echo-interval 30 lcp-echo-failure 4 debug nobsdcomp Any suggestions? Thanks in advance.

  Read the article

• How to setup anonymous access in WinSSHD

  - by Shrike

  I have a Windows server (Win2008R2) with WinSSHD installed. I need to allow anonymous access to a particular folder on the server. Actually it's a git repositiory for bower registy but it doesn't matter. I want WinSSHD allow me to connect to an endpoint like "ssh://[email protected]/" I've created a virtual user "bower" with password only auth. No keys. But if I leave empty password then WinSSHD doesn't allow connection with error "Incorrect virtual account password". How to setup a SSH access without any authentication?

  Read the article

• Site to Site VPN with ISA 2006 to a Dyndns Hostname?

  - by Klaus

  Hi all, i would like to create a site-to-site VPN between my ISA 2006 and a DLink router on the other side. My ISA got a fixed external IP Address, but the Dlink only has a dynamic one. So it makes use of DynDNS. Every "cheap router" supports making VPNs to a hostname. But in ISA 2006 I have to enter a IP Address in the VPN settings. Is there any way to create the VPN connection to a Hostname? Thank you for answers! Kind regards, Klaus

  Read the article

• On a router, how do I block wan access for a particular machine without blocking its access to the local network?

  - by HappyEngineer

  On my tp-link TL-WR1043ND router I want to prevent a particular machine from having access to the WAN while still allowing that machine to access other machines on the LAN. My assumption is that I need to do something in the "Access Control" section, however the problem is that it wants an ip range or domain name for the target of the rule. The router uses DHCP to get an address from the WAN, so I don't have any guarantee what the ip address of the wan will be. If the answer is that it's not possible with this router, could someone describe how to do it using OpenWRT instead?

  Read the article

• Getting MSExchange transport Error on Server 2003 SP2

  - by Scott

  I am getting the following Error messages and do not know how to fix it. Event Type: Error Event Source: MSExchangeTransport Event Category: (8) Event ID: 3017 Date: 4/29/2010 Time: 1:21:12 PM User: N/A Computer: NETSRV Description: A non-delivery report with a status code of 5.3.5 was generated for recipient rfc822;[email protected] (Message-ID <19104335.51321272561635734.JavaMail.SYSTEM@PARROT). Causes: A looping condition was detected. (The server is configured to route mail back to itself). If you have multiple SMTP Virtual Servers configured on your Exchange server, make sure they are defined by a unique incoming port and that the outgoing SMTP port configuration is valid to avoid looping between local virtual servers. Thanks for any help you can provide.

  Read the article

• OpenVPN not sending traffic to internet?

  - by coleifer

  I've set up openvpn on my pi and am running into a small issue. I can connect to the VPN server and ping it just fine, and I can also connect to other machines on my local network. However I am unable, when connected to the VPN, to reach the outside world (either by name lookup or IP). here are the details: On the server the tun0 interface: tun0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1500 inet 10.8.0.1 netmask 255.255.255.255 destination 10.8.0.2 unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 txqueuelen 100 (UNSPEC) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 I can ping it just fine: # ping -c 3 10.8.0.1 PING 10.8.0.1 (10.8.0.1) 56(84) bytes of data. 64 bytes from 10.8.0.1: icmp_seq=1 ttl=64 time=0.159 ms 64 bytes from 10.8.0.1: icmp_seq=2 ttl=64 time=0.155 ms 64 bytes from 10.8.0.1: icmp_seq=3 ttl=64 time=0.156 ms --- 10.8.0.1 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 2002ms Routing table # ip route show default via 192.168.1.1 dev eth0 metric 204 10.8.0.0/24 via 10.8.0.2 dev tun0 10.8.0.2 dev tun0 proto kernel scope link src 10.8.0.1 192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.6 metric 204 I also have ip traffic forwarding: net.ipv4.ip_forward = 1 I do not have any custom iptables rules (that I'm aware of). On the client, I can connect to the VPN. Here is my tun0: tun0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1500 inet 10.8.0.6 netmask 255.255.255.255 destination 10.8.0.5 unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 txqueuelen 100 (UNSPEC) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 21 bytes 1527 (1.4 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 And on the client I can ping it: sudo ping -c 3 10.8.0.6 PING 10.8.0.6 (10.8.0.6) 56(84) bytes of data. 64 bytes from 10.8.0.6: icmp_seq=1 ttl=64 time=0.035 ms 64 bytes from 10.8.0.6: icmp_seq=2 ttl=64 time=0.026 ms 64 bytes from 10.8.0.6: icmp_seq=3 ttl=64 time=0.032 ms --- 10.8.0.6 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 1998ms rtt min/avg/max/mdev = 0.026/0.031/0.035/0.003 ms I can ssh from the client into another server on my LAN (192.168.1.x), however I cannot reach anything outside my LAN. Here's some of the server logs at the bottom of this gist: https://gist.github.com/coleifer/6ef95c3008f130249933/edit I am frankly out of ideas! I don't think it's my client because both my laptop and my phone (which has an openvpn client) exhibit the same behavior. I had OpenVPN installed on this pi before using debian and it worked, so I don't think it's my router but of course anything is possible.

  Read the article

• How can I apply a DSP to my microphone in windows?

  - by user16315

  I'd like to be able to run my microphone through arbitrary DSP filters--Mostly for compression and amplification, but also noise cancelation would be nice. I'd then like to take that output and put it back in a virtual audio device that I could use as input for skype, mumble, teamspeak, or any other VOIP program. With a program like Virtual Audio cable, I can do the 'fake devices' part but as far as I know it does not allow any kind of filtering inline. Does a program like this exist? Or some combination of programs that can be combined to accomplish this?

  Read the article

• Call issue with Freeswitch

  - by gbraad

  I am testing the following with Freeswitch and different devices (nokia n900, nokia e60, ekiga) and have similar results between them. On the Freeswitch server (1.0.4 in multi-tenant mode) I have several user profiles for a domain, e.g. 1000, 1001 for host.com The user are authenticated correctly and calls can be placede. When I place a call from a device registered as [email protected] to [email protected] it will show up at the other end (1002) as [email protected] I would expect this call to show up as [email protected]. The IP address is the one of from the Freeswitch server. Because of this, the calls are no correctly recognized by the address book on certain devices. Can the he domain FQDN of the callers domain/acount be used, instead of the IP address of the server in the SIP uri?

  Read the article

• ubuntu eth0 not reconnecting after cable unplugged

  - by Alex

  I'm running kubuntu 9.10 w/ gnome, I have a static IP defined in /etc/network/interfaces When I unplugged my network cable and rebooted, then reconnected the network cable I was not able to connect. I tried using sudo ifup eth0, and then ifconfig and it seemed as though the IP address had been assigned and I was connected, but I wasn't. I then did ifdown eth0, and again ifup eth0. For some reason I'm not able to access the network. Furthermore, I also attempted to connect via wlan, and was able to connect to the wireless network, but cannot "see" the network. I can't transfer data or access the internet or anything on the network including the router. How do I resolve this? topsy@monolyth:~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:1c:25:1c:df:70 inet addr:192.168.1.145 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21c:25ff:fe1c:df70/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5720 errors:0 dropped:0 overruns:0 frame:0 TX packets:565 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:378035 (378.0 KB) TX bytes:46832 (46.8 KB) Memory:fe000000-fe020000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:4 errors:0 dropped:0 overruns:0 frame:0 TX packets:4 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:240 (240.0 B) TX bytes:240 (240.0 B) By access the network I mean the local network as well as the internet. topsy@monolyth:~$ ping 192.168.1.1 PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. 64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=9.14 ms 64 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=1.24 ms 64 bytes from 192.168.1.1: icmp_seq=3 ttl=64 time=1.01 ms 64 bytes from 192.168.1.1: icmp_seq=4 ttl=64 time=1.00 ms [snip... all OK, icmp_seq from 5-30, time between 0.981-1.25ms] ^C --- 192.168.1.1 ping statistics --- 30 packets transmitted, 30 received, 0% packet loss, time 29035ms rtt min/avg/max/mdev = 0.971/1.300/9.140/1.458 ms topsy@monolyth:~$ route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.1.0 * 255.255.255.0 U 0 0 0 eth0 link-local * 255.255.0.0 U 1000 0 0 eth0 default 192.168.1.1 0.0.0.0 UG 100 0 0 eth0 root@monolyth:~# cat /etc/resolv.conf # Generated by NetworkManager

  Read the article

• Cannot remove wireless network profile even though admin account is used

  - by David Karlsson

  On my windows computer which is connected to a company domain. I have problems with the wireless networking. First of all the computer fails to connect. Second of all I cannot remove the network from the list of wireless profiles. The properties window simply claims that "This network is administered by the Administartor Account". I am currently logged in as the local administrator. I have also tried creating a new admin account and still get the same problem when trying to remove the network. My computer has only the microsoft security essentials antivirus and some VMWare+virtual box connections that I can figure might interfere, but disabling realtime protection has not helped me on this. I also cannot delete the virtual network adapters from the control panel / network adapters...

  Read the article

• Convert from port numbers to protocol names ?

  - by Berkay

  i'm simply using tshark -r botnet.pcap -T fields -E separator=';' -e ip.src -e tcp.srcport -e ip.dst -e tcp.dstport '(tcp.flags.syn == 1 and tcp.flags.ack == 0)' to see the all initiated "legal TCP" connections. However, i need the destination port number conversion to "http" "netbios" etc. i'm not using -n option, but still i get: 128.3.45.128;62259;208.233.189.150;80 This is what i'm trying to get: 128.3.45.128;62259;208.233.189.150;http or 128.3.45.128;62259;208.233.189.150;80;http is better option for me. any idea from tshark users? or any other tool suggestions?

  Read the article

• Cisco Pix does not let traffic pass from outside to inside even though ACL permits

  - by Rickard

  I have tried to make my pix 515 allow traffic from outisde interface to inside, but despite permitting ACL's, it doesn't seem to let traffic through. (It is letting traffic out as it should though) I am have tried both of the following: access-list acl_in extended permit tcp any host 10.131.73.2 eq www and access-list acl_in extended permit ip any any None of them help, but I can access 10.131.73.2 from any host on the inside network. This is a one single host on the inside that should every now and then have an HTTP server running for development purpouses, so it doesn't need to reside on DMZ (and as far as I know, I can't place it on DMZ either as it's in the same subnet as the other ip's I have. Could I have missed anything? I am using PIX Version 8.0(4) My current running config looks like this: http://pastebin.com/TvRFyDrF Hope someone can help me get this working.

  Read the article

• Creating yahoo pipe from google cal feed results in german language headings [closed]

  - by kevyn

  I'm trying to create a Yahoo pipe which combines 4 google calendar RSS feeds into a single feed sorted by date. I've created a yahoo pipe to do this (Which can be found here) The problem is, the headings all appear in German! I've searched online and the only suggestion to be made is this one which suggests that: It's actually Google doing the translation based on the requester IP and doing a geolocation based on that IP. and they suggest changing the .com to a .co.uk, however this does not work for me as yahoo pipes cannot find the feed (403 error) Does anyone have a solution? if there is another solution other than yahoo pipes then I'm all ears! here are the feeds i'm trying to combine: http://www.google.com/calendar/feeds/8tqsfkbs00erv85u2shenea60s%40group.calendar.google.com/public/basic http://www.google.com/calendar/feeds/di85fkb2u1m4si1sqar9d73ghk%40group.calendar.google.com/public/basic http://www.google.com/calendar/feeds/oq5k4pevdjgb4o59muiml72i2k%40group.calendar.google.com/public/basic http://www.google.com/calendar/feeds/f1gg60fr3esdovp15gp83traec%40group.calendar.google.com/public/basic thanks in advance :-)

  Read the article

• LM Sensors always returning same (invalid) value for one temp sensor

  - by pkaeding

  I am trying to monitor the temp sensors on a server, and plot them using Cacti. I have lm-sensors installed and working correctly. For example, here is the output from sensors: % sensors acpitz-virtual-0 Adapter: Virtual device temp1: +26.8 C (crit = +100.0 C) temp2: +32.0 C (crit = +60.0 C) coretemp-isa-0000 Adapter: ISA adapter Core 0: +36.0 C (high = +105.0 C, crit = +105.0 C) coretemp-isa-0001 Adapter: ISA adapter Core 1: +42.0 C (high = +105.0 C, crit = +105.0 C) However, when I try to get this data via SNMP, I get only one sensor's temperature correctly, and another one always returns 100.000 C: % snmpwalk -Os -c public -v 1 10.8.0.18 -m ALL lmTempSensors lmTempSensorsIndex.1 = INTEGER: 0 lmTempSensorsIndex.2 = INTEGER: 1 lmTempSensorsDevice.1 = STRING: temp1 lmTempSensorsDevice.2 = STRING: temp1 lmTempSensorsValue.1 = Gauge32: 26800 lmTempSensorsValue.2 = Gauge32: 100000 So, my question is two-fold: Why is the second sensor that is returned by SNMP giving a value of 100 C (when it should be 32 C) Why are my CPU core sensors not being returned by SNMP?

  Read the article

• Forwarding email to mydomain.com

  - by Martin

  Newbie question: I've got the following set up, the server 2008, the iis and the smtp. I've my mydomain.com set up with DNS pointing to my public ip, www and smtp both. Now I'll be sending alot of emails from my web app to people and this works fine. What I also want is for people to be able to send us email. Please point me in the right direction. Primary objective: [email protected] -- [email protected] Secondary objective, for extra love: [email protected] -- [email protected] and [email protected] -- [email protected] Do I need a popserver? Any tutorials people can recommend? Addition: And the MX. I've also pointed the MX record to my ip.

  Read the article

• Is there any way to isolate the python2.7 , mod_wsgi installation from main environment

  - by user31

  I have many local virtual machines for building the django websites. I find it very hard to configure all the machines with mod_wsgi , python and all that installation issues. Is there any way that i can install even python 2.7 , mod_wsgi etc and all that inside the virtual environment folder so that i can just copy paste that folder in my live server and i don't need to mess with mos_wsgi , python 2.7 and other issues. Is it possible or even any close variation of that so that puting the site to live servers is very easy and everything which is needed by site should be included locally I also face many problems when i need to move the django sites across servers

  Read the article

• Wildcard DNS setting in Windows Server 2008 R2 DNS Server not working

  - by mattmcmanus

  We've got a windows server 2008 R2 DNS server that we are trying to setup a wildcard DNS entry in. So we want proxy.domain.com and *.proxy.domain.com to go to the same IP. Right now, it seems as if the windows server has registered the actual asterisk as the subdomain. So *.proxy.domain.com resolves to the right IP but something like login.proxy.domain.com doesn't. This seems to be a problem specifically with 2008 because we were able to get this working on a 2003 server. Has anyone come across this yet?

  Read the article

< Previous Page | 324 325 326 327 328 329 330 331 332 333 334 335  | Next Page >