Search Results

Search found 11093 results on 444 pages for 'issues'.

Page 329/444 | < Previous Page | 325 326 327 328 329 330 331 332 333 334 335 336  | Next Page >

• Replacing HD in an MacOS 10.6.8 server caused all shares to fail

  - by Cheesus

  I'm hoping someone might have a helpful suggestion about this problem. We have 2 MacOSX servers available for file sharing. (quad Xeons - 2GB RAM, both 10.6.8), No.1 is an Open Directory Master with 50+ user accounts, No.2 has only 2 local accounts (/local/Default) and looks at the OD Master for all user accounts (/LDAPv3/10.x.x.20/) Both servers have 3 internal HD's, The boot volume with only Server OS and minimal Apps. A 'DataShare' HD (500GB) and a backup drive (500GB). After upgrading the DataShare HD in Server No.2 from a small internal HD (500GB) to larger capacity (2TB) drive, users are unable to connect to shares on Server No.2. Users get an error "There are no shares available or you are not allowed to access them on the server" The process I followed was to use Carbon Copy Cloner to create an exact copy of the original data drive (keeps all ownership data, UID, permissions, last edit date and time). Everything booted up ok, no indication there was any issues. (Paths to the sharepoint look good) Notes during troubleshooting - Server1 is operating perfectly, all users can access shares and authenticate etc. - I've checked the SACL (Server Access Control List) settings is ok. - On Server2 in the Server Admin' app, I can see all the shares listed ok. The paths seem valid, I can disable / reenable the shares, no errors. - On Server2 'workgroup manager' lists all the accounts from the OD Master in the LDAP dir view. All seems fine from here. Basically everything looks normal but no file shares on Server2 can be accessed from regular users.

  Read the article

• Windows 7 - All Icons Missing, Explorer Progress Bar Never Finishes, Libraries Gone

  - by Alex

  since yesterday i've had three issues which all arose at the same time. windows 7 x64, i7 2.8ghz 12gb ddr3 1 - my libraries, favorites, drives are missing...basically the entire sidebar is gone. http://i.imgur.com/m8pRQ.png. yet when i open a dialog, my libraries and drives are back to normal ONLY for the dialog. i tried Restore Default Libraries. it works one time, but when i open libraries again i go back to the empty mess. restarting the computer temporarily fixes the problem. 2 - in the explorer window that's showing libraries, when i navigate to a certain folder i get an unending progress bar (the kind that turns the address bar green). yesterday when the problem started, i was saving a file to this folder. the program writing the file crashed during the write and i believe that's what caused the problem. i have sugarsync backing up that folder and when i restarted the computer sugarsync informed me that its database was corrupted, so i had to uninstall and reinstall the software. 3 - icons are missing. the Rebuild Icon Cache did not fix this. http://i.imgur.com/r9pgo.png restarting the computer temporarily fixes these problems, but when i open the directory with the initial write problem, everything stops working. edit: i should note that i did a chkdsk /f and it repaired problems. i also did the thing that verifies then restores windows files (can't remember the command now), which reported that everything was normal.

  Read the article

• Directories shown as files, when sharing a mounted cifs drive

  - by Johan Sigfred Abildskov

  I have an issue where a directory is shown as a file when accessing a samba share ( on Ubuntu 12.10 ) from a Windows machine. The output from ls -ll in the folder on the linuxbox is as follows: chubby@chubby:/media/blackhole/_Arkiv$ ls -ll total 0 drwxrwxrwx 0 jv users 0 Jun 18 2012 _20 drwxrwxrwx 0 jv users 0 Apr 17 2012 _2006 drwxrwxrwx 0 jv users 0 Apr 17 2012 _2007 drwxrwxrwx 0 jv users 0 May 12 2011 _2008 drwxrwxrwx 0 jv users 0 Feb 19 09:53 _2009 drwxrwxrwx 0 jv users 0 Dec 20 2011 _2010 drwxrwxrwx 0 jv users 0 May 8 2012 _2011 drwxrwxrwx 0 jv users 0 Mar 5 11:37 _2012 drwxrwxrwx 0 jv users 0 Feb 28 10:09 _2013 drwxrwxrwx 0 jv users 0 Feb 28 11:18 _Mailarkiv drwxrwxrwx 0 jv users 0 Jan 3 2011 _Praktikanter The entry in /etc/fstab is: # Mounting blackhole //192.168.0.50/kunder/ /media/blackhole cifs uid=jv,gid=users,credentials=/home/chubby/.smbcredentials,iocharset=utf8,file_mode=0777,dir_mode=0777 0 0 When I access the share directly from the NAS on my Windows box, there are no issues. The version of Samba is 3.6.6, but I couldn't find anything in the changelogs that seem relevant. I've tried mounting it in different locations with different permissions, users and groups but I have not made any progress Due to my low reputation on serverfault ( mostly stackoverflow user ) I'm unable to post a screenshot that shows that the directories are shown as files. If I type the full path in explorer, the directory listing works excellently, except for any subdirectories that are then shown as files. Any attack vector for this issue would be greatly appreciated. Please let me know if I have provided insufficient details. Edit: The same share when accessed from a OS X, works perfectly listing the directories as directories. Best Regards!

  Read the article

• Users are getting a temporary profile

  - by Serhiy

  A bit about current setup: It is windows 2008 R2 AD servers (all of them are 2008R2) and couple locations which set as Sites. Each location has DFS on AD server. Roaming profiles are not used nor configured. Users have their home folder configured as mapped S: drive to DFS shared folder. For example: in profile tab user has: Home Folder - connect - S: to \\domain.com\dc\users\%username% We also have redirected Desktop, Documents and Downloads folders to \\domain.com\dc\users. Everything was fine. Suddenly (today), users in most locations lost their local profile (both XP and W7 desktops) and got temporary profiles. Also, it looks like local profile was created today (from folder properties). I checked events at couple machines and there is not errors related to profiles or logon process. I do not see issues in event logs at servers as well. Basically, I run out of ideas what is wrong and why machines lost their local profiles. PS: Laptop users do not have their folders redirected, but lost profiles as well.

  Read the article

• File permission woes on an Ubuntu ec2 instance

  - by Pardoner

  I've set up an amazon ec2 instance and I'm have some file permission issues. I've created myself a new user and added myself to the following groups: adm:x:4:me,ubuntu sudo:x:27:me www-data:x:33:me,www-data ssh:x:108:me admin:x:111:me ubuntu:x:1000:www-data,me me:x:1001:me but when I cd /var/www I can't do simple commands without doing sudo. So I chown -R www-data:www-data /var/www to ensure that I'm in the owning group but I still have to type sudo for everything. If I sudo su www-data it works fine. Since I'm in the www-data group shouldn't I have the same privilages as www-data? One strange thing I'm noticing is that when I ls -l it list the owner but not the group names. Could this possibly be part of the issue? Is is posible for a directory to not be part of a group? drwxr-xr-x 4 www-data 4.0K Oct 24 16:39 . drwxr-xr-x 14 root 4.0K Oct 10 16:58 .. drwxrwxr-x 9 www-data 4.0K Oct 23 04:03 admin.mywebsite.com drwxrwxr-x 2 www-data 4.0K Oct 4 00:29 mywebsite.com drwxrwxr-x 9 www-data 4.0K Oct 23 04:03 staging.mywebsite.com Edit : It appears I had some alias messing with my ls command. By calling \ls -l I can see that all my files are in the correct group.

  Read the article

• Slow RDP after server joins domain

  - by Chris Grove

  We're having RDP issues with Amazon cloud servers that we recently joined to an Active Directory domain. The setup is: A local office network A virtual private cloud in Amazon An IPSec tunnel between the two networks A number of Windows 2008 R2 servers on both networks An AD domain (call it abc.net), with one domain controller in each network. The domain controllers are both new, fresh installs. Before we had the domain set up we had local accounts for the cloud computers which were used for RDP access. Our idea was to get all of the servers on to the domain so we could use domain logins instead of per-server local logins. Before the cloud servers were in the domain, RDP (from the office network or through a VPN to the cloud) worked great. After we joined the cloud servers to the domain, RDP from the office became very slow - a few minutes to log in, long frequent pauses when the interface is unresponsive, generally just a slow and frustrating experience. This is a problem regardless of whether a domain or local login is used for RDP. Oddly, when outside of the office network and connecting to the cloud directly with the VPN, RDP is still very responsive. Any idea why RDP from office to cloud is suddenly very slow after the cloud servers join the domain? What can I look at in our configuration to address this? Any help is greatly appreciated.

  Read the article

• Apache displays error page half way through PHP page execution

  - by Shep

  I've just installed Zend Server Community Edition on a Windows Server 2003 box, however there's a bit of a problem with the display of a lot of our PHP pages. The code has previously running under the same version of PHP (5.3) on IIS without any issues. By the looks of things, Apache (installed as part of Zend Server) is erroring out during the rendering of the page when it comes across something it doesn't like in the PHP. Going through the code, I've been able to get past some of the problems by removing the error suppression operator (@) from function calls and by changing the format of some includes. However, I can't do this for the whole site! Weirdly, the error code is reported as "200 OK". The code snippet below shows how the Apache error HTML interrupts the regular HTML of the page. <p>Ma quande lingues coalesce, li grammatica del resultant lingue es plu simplic e regulari quam ti del coalescent lingues.</<!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN"> <html><head> <title>200 OK</title> </head><body> <h1>OK</h1> <p>The server encountered an internal error or misconfiguration and was unable to complete your request.</p> <p>Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error.</p> <p>More information about this error may be available in the server error log The Apache error log doesn't offer any explanation for this, and I've exhausted my Googling skills, so any help would be greatly appreciated. Thanks.

  Read the article

• Reliable router with good VPN and WAN Throughput [closed]

  - by Asdande

  I have 2 cisco rv180 VPN router. These routers are giving me lots of problems. The webpages wont load correctly, slow response to load webpages plus other many issues. I have several cases pending with cisco. I give up on these routers. I would like to know if you guys can recommend me a reliable router for our 3 branches (NY - main, SC and FL). In NY- main office, we have 55 users. In SC branch, 6 users. In Florida we only have 1 (will grow soon). I need a router capable of support: 3 VPNs Site-to-Site connection VPN throughput of at least 40-50 Mbps WAN throughput at least 100 Mpbs and up PPTP Server for at least 5 PPTP users Web filtering - all users need access to internet Good Firewall Port forwarding for FTP Server - able to show the public IPs of FTP users (rv180 cannot do that, just shows me router's LAN interface IP, opened a case with cisco, now escaleted to level 2, still no answer or workaround) Dual WAN ports for balance or backup internet. Gigabit WAN/LAN ports Price between $400-$500 range. I was thinking on the TP-LINK TL-ER6120 or TL-ER6020 according to the review on smallnetbuilder.com http://www.smallnetbuilder.com/lanwan/lanwan-reviews/31983-tp-link-tl-er6020-safestream-gigabit-dual-wan-vpn-router-reviewed but I don't want to make another mistake as I did when I bought the cisco RV180. Thank you in advance,

  Read the article

• How to verify system using right GPU, after system reset [duplicate]

  - by Antoros

  This question already has an answer here: Is my mobile AMD card being used? 2 answers OS: Windows 8 CPU: Intel® Core™ i7 Processor 3635QM GPU 1 : Intel HD Graphics 4000 GPU 2 : AMD Radeon™ HD 8870M other info: System Spects Problem: im unsure that CCC is using AMD card instead of Intel's, i have encountered several issues since updating to 8.1 and i don't know what to do What happened: Installed 8.1 patch first day After 1 minute of use, BBSOD, windows never loaded again System restore wouldnt recognize 8.0 restore points i did a system reset to windows 8 since the laptop was only 3 weeks old System Broke, it did restore to factory BUT kept the registry almost intact, i had to install almost everything again, since the factory drivers where working with the updated one's registry and several problems CCC Broke too <- What i've already done Installing new drivers on top of old ones didnt work, so i used AMD uninstaller first Uninstalled and Re-installed Intel's HD Graphics Driver Tried to install mobile center, but AMD told me that it wasnt compatible (even if thats the only driver that they provide via their page as seen Here) Tried to use Auto-Detect, couldnt install driver because card was disabled because it didnt have the drivers... (see what they did here?) Had to use a workaround with Samsung Update, the driver didnt appear as download so had to use search and downloaded the driver manually. Now the graphic card appears on device manager and catalyst but as 8800 series (not exact model), and cant check the card with neither dxdiag/GPU-z/HWMonitor when right-clicking on CCC only Intel card appears launching a game and using as "high performance" would speed it up a little but i cant be sure How to verify its working properly? HWMonitor wont show AMD card even when set to high performance Latest GPU-Z wont work because a problem with Intel's, and legacy ones wont either what can I do now? I don't even know if I fixed my problem or not, and i also want to to use Adobe Premier with it, and its locked (the option to run it with the amd card not intels) Edit: now it seems to work, but cant change the setting for adobe Premiere and other programs that i Need to

  Read the article

• Docking Station Sound Doesn't Work on Dell D830 with Windows 7

  - by cisellis

  EDIT: I can only mark one answer as the correct one but the actual solution was a combination of two comments (updating the BIOS to A15 AND installing the Sigmatel audio drivers). I have a Dell Latitude D830 laptop that is running Windows 7 Enterprise x64. I connect to a docking station during the day with multiple monitors, a keyboard and a mouse. Everything runs with no problems including most of the docking station ports (usb, monitors, etc.) However, the sound port from the docking station does not work since the upgrade to Windows-7. Even with the laptop plugged in, the sound always comes out of the laptop, not the headphones plugged into the docking station. Here's what I've tried: I've seen other issues like via Google this that seem to be mostly unanswered. I found one or two that referenced using the Vista x64 drivers, especially the Nvidia drivers. I do not have an Nvidia chipset but I've reinstalled the sound drivers and that has not helped. I don't have a support contract and considering the cost is usually high to call Dell, that's not an option. Dell's forums are pretty much a wasteland and I've found no help there. Since this is a docking station I thought I might need to try the SATA or Intel chipset drivers from the dell site instead, however I'm not really sure and I need to work on this laptop in the meantime. I can't really afford the downtime to experiment with random drivers all day in case they turn out to be incompatible (Dell still hasn't added Windows 7 to their support site as far as I can tell). Does anyone have any other ideas? Has anyone had this issue and solved it? If so, how? Thanks in advance for your help.

  Read the article

• Where do these mysterious DNS lookups come from and why are they slow?

  - by Hongli

  I have recently obtained a new dedicated server which I'm now setting up. It's running on 64-bit Debian 6.0. I have cloned a fairly large git repository (177 MB including working files) onto this server. Switching to a different branch is very very slow. On my laptop it takes 1-2 seconds, on this server it can take half a minute. After some investigation it turns out to be some kind of DNS timeout. Here's an exhibit from strace -s 128 git checkout release: stat("/etc/resolv.conf", {st_mode=S_IFREG|0644, st_size=132, ...}) = 0 socket(PF_INET, SOCK_DGRAM|SOCK_NONBLOCK, IPPROTO_IP) = 5 connect(5, {sa_family=AF_INET, sin_port=htons(53), sin_addr=inet_addr("213.133.99.99")}, 16) = 0 poll([{fd=5, events=POLLOUT}], 1, 0) = 1 ([{fd=5, revents=POLLOUT}]) sendto(5, "\235\333\1\0\0\1\0\0\0\0\0\0\35Debian-60-squeeze-64-minimal\n\17happyponies\3com\0\0\1\0\1", 67, MSG_NOSIGNAL, NULL, 0) = 67 poll([{fd=5, events=POLLIN}], 1, 5000) = 0 (Timeout) This snippet repeats several times per 'git checkout' call. My server's hostname was originally Debian-60-squeeze-64-minimal. I had changed it to shell.happyponies.com by running hostname shell.happyponies.com, editing /etc/hostname and rebooting the server. I don't understand the DNS protocol, but it looks like Git is trying to lookup the IP for Debian-60-squeeze-64-minimal as well as for happyponies.com. Why does Debian-60-squeeze-64-minimal come back even though I've already changed the host name? Why does Git perform DNS lookups at all? Why are these lookups so slow? I've already verified that all DNS servers in /etc/resolv.conf are up and responding slowly, yet Git's own lookups time out. Changing the host name back to Debian-60-squeeze-64-minimal seems to fix the slowness. Basically I just want to fix whatever DNS issues my server has because I'm sure they will cause more problems that just slowing down git checkout. But I'm not sure sure what the problem exactly is and what these symptoms mean.

  Read the article

• How to route broadcast packets from machine with two network interfaces on same subnet

  - by Syam

  I run RHEL 5 and have two NICs on one machine connected to the same subnet: eth0 192.168.100.10 eth1 192.168.100.11 My application needs to receive and transmit UDP packets (both unicast & broadcast) via these interfaces. I've found the way to handle the ARP problem and I've added routes to handle the routing problem: ip rule add from 192.168.100.10 lookup 10 ip route add table 10 default src 192.168.100.10 dev eth0 (and similarly, table 11 for eth1) The problem is that only unicast packets gets routed properly. Broadcast packets always go out through eth0. I tried removing the rule for 192.168.100.0 & 192.168.100.255 from table 255 and adding them to my tables. But then I see ARP requests being given out for packets to 192.168.100.255 (obviously, no nodes respond and nobody gets any data). Due to several techno-political issues, I'm stuck with this configuration and can't change subnets or try something different. I've tried SO_BINDTODEVICE and it works, but I'd prefer a solution that doesn't need my application to run as root. Is there a way to get this working? Any help is highly appreciated.

  Read the article

• MacBook Pro (2007 - ATI-Card) Screen goes half black then shuts down the entire computer

  - by BluePerry

  Hey, when I'm starting my MBP I get about 10-60 seconds of the booting process before the screen goes half black (Its like applying a black to transparent gradient from the left side of the screen to the middle of the screen). After a 5 seconds the entire screen blacks out and the MBP shuts down. There have been issues with heat and some minor artifacts on the screen in the past but nothing serious as far as I know. Everything could be resolved by rebooting or letting the MBP cool down a bit. I would like to identify the problem now. There are 3 possibilities I can think of right now: My graphics card is defect and shuts down after a few seconds. (But if thats true, I find it kind of hard to explain the HALF black screen) My LCD-Panel is defect and sends back wrong signals so the system shuts down??? (I not sure about that) My fan or/and thermal sensors are defect and forcing the graphics card to shut down. Can anyone point if I'm right or if there yet another reason for this. I'd be thankful for any hint or tips. Cheers, Per

  Read the article

• Why Would one VLAN have no Communication on one Switch?

  - by Webs

  So the problem is we have a device or host that needs to communicate on a specific VLAN. This VLAN is not new, it is running all throughout our environment and works fine. But the VLAN was recently configured on the switch in question, a Cisco 3750. The DHCP server is handing out addresses on that VLAN with no problem. I have verified the cable between the host and switch and tried multiple hosts, but none of them can communicate or get an address. I plugged my laptop into an empty port which had a different VLAN assigned and immediately got a DHCP address. When I changed that port to the same VLAN I'm having issues with I got the same problem. The laptop just sits there and tries to DHCP an address but nothing happens. I double checked the cores and their Layer 3 VLAN config and its fine too. Plus I figured the issue couldn't be with them because the VLAN works fine everywhere else it exists. So the only other thing I can think of is the switch, but the VLAN exists on the switch and seems to be configured correctly. The trunks appear to be configured just fine as well too. Anyone have any ideas? I'm lost on this one.

  Read the article

• Getting Started in SuSE as an Ubuntu User

  - by Subhamoy Sengupta

  I am not a Linux newbie, but haven't touched SuSE in a very very long time (last time I tried it, it was SuSE 7!). Finally now I felt like giving it a try, and many things seem strange or unnecessarily complex. I have a series of questions. How do I ensure that my packages are uptodate? It sounds silly, but I tried the obvious methods already. I have disabled the default repositories that show up when you do zypper lr, and added Tumbleweed and packman repositories (Essentials, Multimedia, Extra). Then I did a sudo zypper ref --force and then sudo zypper dup, and it tells me many dependencies are not met. I have already added solder.allowVendorChange=true to /etc/zypp/zypp.conf, so it should not care which repository the latest versions are in, and just upgrade to it. Even when I chose to skip the packages with unmet dependencies, and seemed like quite a bit happened in the background, I opened Firefox afterwards and the version was 7! I am guessing things did not go as expected. But of course this is not a problem with SuSE, but I am not understanding the system right. How do I do it right? When I start typing arguments of a command, for example sudo zypper install, when I type sudo zypper ins and keep hitting TAB, nothing happens! It always worked in Ubuntu and I feel very uneasy with this. Is this how SuSE is supposed to be? When I try to install something, and I start writing its name, even though the package exists and I am sure of it, hitting TAB does not autocomplete it. This is also quite inconvenient. Why is it not happening? There are many things in SuSE that are really great, and I think I will stay with it and not go back to Ubuntu once I settle these very rudimentary issues. But right now they are giving me a lot of grief! Please help!

  Read the article

• Internet Explorer ignoring PHP setcookie() from CentOS server

  - by Hussein Sabbagh

  In the past we used a windows XAMPP server for an internal website. It worked fine but had some intermittent issues and we decided to move to a LAMP server on CentOS. We made the switch today but it turns out Internet Explorer ignores every attempt I make at saving a cookie. There is no underscore in the URL being used... the URL is actually the same as the one the XAMPP server used, where I was able to save cookies without any problems. It really doesn't make any sense to me, all of the code is the same. The only thing to change is the version of PHP and the server OS. The website works on all other browsers except IE. I can't even make a simple setcookie call. On a blank test page I use setcookie("test", "test", time()+36000, "/"); sleep(5); print_r($_COOKIE); and there is nothing there. Our users can't log into the website because of this and I have no idea what the issue is. If anyone can provide any clues or resolutions I would greatly appreciate it. Obviously the easy answer is to not use IE, but that is not an option in this case.

  Read the article

• Computer does not boot, often

  - by tam

  I've ran into a issue with my computer that it does no longer reach POST, but simply powers on for a fraction of a second and powers off. But this is not always, some times it boots just normally and it works as it should, no issues with not enough power or anything. But as soon as I turn it of, I can not turn it back on, but then again at some random point it just powers up again, and resumes normal operation. If I disconnect the 8pin ATX connector from the motherboard, it powers up, fans and disks spinning normally until I power it off again. So this problem only happens when ATX is connected, which seems odd, I normally always saw this kind of an error if ATX was not connected, but here it's the exact opposite. It also does not emit any sound on the buzzer, except the normal beep, when it powers up normally. I have already tried: Remove graphics card Remove one and/or all RAM sticks Disconnect everything non-essential, even hard drives Clear CMOS I have not yet tried to remove all components and tried to boot everything outside of the case, because I did not have the time to disassemble and bleed the water loop. However, I can confirm that nothing is stuck underneath the motherboard, not is any of those brass raisers touching the board where it should not. Specs: Gigabyte GA-970A-UD3 AMD FX6300 ATI HD7850 I think this should be enough for this issue.

  Read the article

• KVM Guest Reboot Loop

  - by javano

  I have been pulled into a situation where a KVM server (CentOS 6.2) lost power and upon reboot one of the guests hasn't started up again (XP SP3). I have SSH'ed in and someone must have changed something relating to the hyper visors prior to the power loss, but not rebooted all the guests. This particular guest wouldn't start because it was configured to use /usr/bin/qemu-system-x86_64 which isn't there now (assuming it was before?). I changed it to use /usr/libexec/qemu-kvm as this is what all the other guests on this server seem to be using, and its booting up. Using virt-manager on my local machine I can connect to the display of the XP machine and it gets as far as this screen; http://support.gateway.com/emachines/issues/2-1131285152-01.gif The problem I face now, is that which ever option I choose the machine just reboots. So it's and endless loop. I thought that perhaps a file system error maybe present due to the unclean shutdown. There is an XP SP3 ISO mounted under the guest, which I booted from in an attempt to access the recovery tools, but I don't have the Administrator password! I am out of ideas, and it's turning out to be quite the conundrum. Should I use a 3rd party live CD to test the FS for errors? How else can I trouble shoot these restarts?

  Read the article

• On clients use generic driver for printer shared by CUPS

  - by Daniel

  I know this worked really easy with a recent CUPS version some years ago. Unfortunately I fail to do the following with latest CUPS nowadays. How to share a printer without using printer specific drivers on the clients with CUPS? The printer is a Samsung ML-2010. The important fact is that it needs a quite specific library for printing called splix. That is installed on the server and prints well. What makes trouble is using that printer over the network. I found out how to use Avahi under Linux to make use of DNSSD to advertise and discover printers. But as far as I understand the new CUPS offers the internal driver interface on the network. This has 2 major issues: anybody can fiddle with the driver and I don't trust any uncommon printer library to be "network secure" anyone who wants to use my printer including guests needs to install the specific drivers first I remember the old days when I could enable "Share this printer" on the CUPS server and all clients would magically detect the printer and just send their job data to the server and have it do the driver stuff. After everything a read I guess this is related to the changes Apple introduced with CUPS including dropping of the integrated network discovery protocol. If it helps: Server: Ubuntu LTS 12.04 Server with CUPS 1.5.3 Client: Arch Linux with current CUPS 1.6.1 On another box with Ubuntu the printer was setup automatically at least but the mechanism used the Splix library for that.

  Read the article

• Booting an Asus EeePC from a LiveCD USB stick

  - by Bryan

  I have two identical Asus EeePC netbooks that are both installed with Ubuntu. One of them was sitting on the closet shelf and the battery went completely dead. When I charged the battery and tried to boot the it, I got the "No init found" error. In trying to follow the suggested way to fix it posted here, I used the Startup Disk Creator on my Ubuntu 11.10 desktop machine to create a USB stick with a bootable Ubuntu 11.10 live CD on it (the netbook doesn't have a CD drive). I plugged the USB stick into the netbook with the init issues, went into the BIOS and selected the USB stick as the 1st choice to boot from, and did a hard restart. It then just stuck at the flashing underscore. Not knowing why it wasn't working, I tried booting my working netbook from the USB stick. When I got into the BIOS on the working netbook, I noticed the description in the boot order section for the USB device was different. On the non-working netbook, the description was SWISSBIT (the name of the USB stick) but on the working netbook it was just "Rem. Drive". I also noticed on the working netbook there was an additional option under the bootable order section that allowed me to choose which hard drive to boot from. This section showed two hard drives, one of them being my USB stick. So, rather than changing the device boot order, I selected the USB stick as the hard drive to boot from first and it worked like a champ - I was able to boot into the LiveCD on the USB stick. Seems to me the working netbook is seeing the LiveCD USB stick as a hard drive, where-as the non-working netbook is seeing it as a plain ol' USB stick. The BIOS is the exact same version on both netbooks... any idea why it works on one and not on the other?

  Read the article

• SQL Server 2000, large transaction log, almost empty, performance issue?

  - by Mafu Josh

  For a company that I have been helping troubleshoot their database. In SQL Server 2000, database is about 120 gig. Something caused the transaction log to grow MUCH larger than normal to over 100 gig, some hung transaction that didn't commit or roll back for a few days. That has been resolved and it now stays around 1% full or less, due to its hourly transaction log backups. It IS my understanding that a GROWING transaction log file size can cause performance issues. But what I am a little paranoid about is the size. Although mainly empty, MIGHT it be having a negative effect on performance? But I haven't found any documentation that suggests this is true. I did find this link: http://www.bigresource.com/MS_SQL-Large-Transaction-Log-dramatically-Slows-down-processing-any-idea-why--2ahzP5wK.html but in this post I can't tell if their log was full or empty, and there is not any replies to the post in this link. So I am guessing it is not a problem, anyone know for sure?

  Read the article

• choosing hosting for custom ecommerce site, shared, dedicated, what to look for?

  - by spirytus

  Hi, I have (almost) developed website for my client and now need to decide on hosting. Most of the users of the site will be located in Australia, and so am I and my client. Now, I want to consider everything before deciding on host and few questions comes to my mind: I cannot afford website being down, and all hosts say something like "99% uptime guranted". Should just that be enough or shall I ask hosts for some stats maybe? Does it make any difference if servers and whole hosting company is located in Australia or outside? I've been hosting few sites with JustHost.com on shared hosting (cheapest plan, servers in US I believe) and never seen any delays but could that be an issue? I would prefer Australian company so I can actually go to them and give them piece of my mind if something goes wrong, but US servers seem cheaper. Would share hosting do? Its ecommerce custom build php application, I know there are security issues with sessions etc on shared hosting. Will take precautions of course but could share hosting be an issue? Would dedicated be worthy option considering that my knowledge of server is very limited? I need to run php/mysql, with preferably unlimited bandwidth as with my experience I cannot tell what amount of traffic would be sufficient. Please let me know if I didn't provide you with enough information so you could answer my questions, will gladly explain further. In advance thanks for any answers :)

  Read the article

• Why is my cron daemon is being killed every few minutes?

  - by user113215

  As of about a week ago, my cron daemon refuses to stay running. I'm using Debian 6 x64 on an OpenVZ virtual machine. Running something like pgrep cron shows that the daemon isn't running. I start the service with service cron start or /etc/init.d/cron start and it launches, but it disappears from the running process list after a few minutes (varying anywhere between 1 - 30 minutes before the process is killed again). Using strace -f service cron start, I can see that the process is being killed for some reason: nanosleep({60, 0}, <unfinished ...> +++ killed by SIGKILL +++ There's nothing relevant in /var/log/syslog, /var/log/messages, /var/log/auth.log, or /var/log/kern.log to explain why the the process is dying. The system has at least 800 MB of free memory, and cat /proc/loadavg returns 0.22 0.13 0.04 so resources shouldn't be the issue. With cron running, free -m reports: total used free shared buffers cached Mem: 1024 211 812 0 0 0 -/+ buffers/cache: 211 812 Swap: 0 0 0 I also tried removing and reinstalling the cron package using apt-get. Update: I initially thought the problem was a resource issues. I erased my entire VPS and started from a fresh Debian image. There is now nothing else running on the system, but even from a clean install my cron daemon is still being killed at random. What else should I check? How do I find out what's killing my crond?

  Read the article

• Unable to ssh to a Linux VM after a day

  - by jogabonito

  I have a machine running 4 VMs on it. There is one Fedora VM which is causing me some trouble. The IPs of the VMs are something like 10.100.100.* I have a Windows PC which is in the same network. It has an IP 10.100.25.77. When I reboot the Fedora VM, I am able to ping it from my Windows PC as well as use putty to ssh to it. The next day, I cant ping it or ssh from my Windows PC. However I can ping and ssh to the other VMs on the machine. If I ssh to one of the other VMs, I can ping and ssh to the Fedora VM. Next if I restart it, things get back to normal and I can access it without any issues. The IP of the VM doesn't change after rebooting and it is statically assigned I would like to know what is causing this and how to get it fixed. As a last resort, I am thinking of running a cron job to restart the VM every night, it is not a critical server, but will be generally used occasionally in the day time.

  Read the article

• Display issue with fresh install of windows server 2012

  - by Tony

  I installed windows server 2012 last night on my home "server". I use server loosely. From the get go I had display and graphic issues. The image was fuzzy and jumbled up during the install. This continued once booted into the install. I did installed Server 2012 twice now as the first time, I only installed "core". I know this is not a busted graphics card because it worked fine in Win7, during boot, and fine in "core" mode. Once booted into "GUI" install of Server 2012, the image was messed up again. To make things even more weird, the windows "loading" screen looks fine. Once the login screen appears the image is fuzzy and jumbled. My guess was that it was a driver issue. I did try to install the win8 x64 drivers from nvidia. This caused the system to become unbootable and I had to restore to a previous working point and uninstall the driver. I did try two different monitors and cables. Also both ports on the back of the video card. I did manage to get RDP running and that works fine. I rarely work directly on this machine but it would be nice to have the option back. Geforce 210, AMD 4600+, 4 gigs of ram.

  Read the article

< Previous Page | 325 326 327 328 329 330 331 332 333 334 335 336  | Next Page >