Search Results

Search found 10741 results on 430 pages for 'linton day'.

Page 329/430 | < Previous Page | 325 326 327 328 329 330 331 332 333 334 335 336  | Next Page >

• How to use Windows mini-dump files?

  - by ekaj

  I have a Mini-ITX Intel DH61AG mobo w/ an Intel i3 processor and 8GB of 1600MHz DDR3 RAM. Anyways, this computer has been crashing kind of frequently. It is not an OS problem, as I have used Ubuntu (and had kernel panics), Windows 7, and Windows 8 (BSODs aren't going to keep me from tinkering =p) Anyways, each of these OSes have had problems, so I ran a HDD check, and I know it is not a heat issue because I tested the processor for a few days when I first put the computer together. When I ran memtest86+, however, I got an error - so I did individual testing, and both chips came back good, did a really intense test with both of them again (took half a day), and no errors. So, I still think the problem could be RAM, but I am not sure - I tested it pretty extensively (might let it run all night again tonight)... which brings me to my point. Could someone explain to me (in simple terms if possible) how to READ the minidump files of Windows computers? I've tried before with a guide I found online, but failed miserably (can't remember guide, either =/). I'm fine with installing the software, I will probably need it sometime in the future as well. I have seen a few other posts on SU that just ask people to post minidump logs, but I feel as if that is too localized. Would someone be able to explain this? Note: If someone knows how to do this, but doesn't want to explain and is still willing to help me, this is the link for the minidump file =p Make sure to click

  Read the article

• Why does my computer crash randomly?

  - by Donavon Decker

  The other day I went out to my van to get my Tower and when I opened the trunk it fell out. I brought it into the house and opened it, and everything looked ok. When I started it up, about 1-3 minutes afterwards it would crash. It did this over and over until I reseated the cooler. Everything seemed normal again, until after about 10 minutes of gameplay (any game), it would crash. I reseated my GPU + reinstalled the drivers, however I still get the same error. A while back, I'd check my 'Windows Rating' periodically, and all of them were in the '6.0-6.9' range except for my hard disk usage (always been like that [not relative]). Today I went in and looked, and my Processor and Memory was rated 5.4. I reseated my cpu and my memory, refreshed the windows rating, and then my processor and memory went from 5.4, to 5.1. A few minutes ago I reseated them once again, and now it's back to 5.4. Note: Not sure if this is relevant to the issue, but I updated my bios earlier today I honestly have no idea what the issue is, but I'm getting aggravated at the problem. Here are some images which contain images of my specifications: i1271.photobucket.com/albums/jj623/donxdeck/1_zps09f0607c.jpg i1271.photobucket.com/albums/jj623/donxdeck/4_zps381cd00a.jpg i1271.photobucket.com/albums/jj623/donxdeck/3_zps54bba720.jpg i1271.photobucket.com/albums/jj623/donxdeck/2_zps945d3d72.jpg Thanks for the help

  Read the article

• Ubuntu 12.04 on VMware Player loses network configuration

  - by d4ryl3

  I've been having this issue for 2 weeks now with my VMware Player-hosted Ubuntu 12.04. I only use it for my LAMP stack. I've had no issues with it before until about 2 weeks ago when it almost always (once per day at least) loses its network configuration. On boot it shows: Waiting for network configuration... Waiting up to 60 more seconds for network configuration... Booting system without full network configuration... Then when I do ifconfig -a it doesn't show an IP Address and couldn't get online. The only resolutions I've found so far was either to reinstall VMware Tools or use the VMware Player installer and choose Repair. This is frustrating to me because even when the issue was resolved after doing either of the steps I mentioned, the IP Address gets changed. Then I'd have to update the Remote Configuration of my IDE (Netbeans) and my database manager. What could possible cause this? Please help. Thank you. Additional details: I'm using a laptop with Windows 7 and connected to the office WiFi, which is unrestricted as far as I know. Thanks again.

  Read the article

• Sharing large (multi-Gb) files with clients

  - by Tim Long

  I wasn't sure if this was the best place for this question, but I think it is squarely in the realm of the IT admin so that's the reason I put it here. We need to share large files (several Gigabytes) with external clients. We need a simple way of reliably and automatically publishing these files so that clients can then download them. Our organization has Windows desktops and a Windows SBS 2011 server. Sharing from our server is probably suboptimal from the client's perspective, because of the low upstream bandwidth of typical ADSL (around 1 Mbps) - it would take all day (9 hours for a 4Gb file) for the client to download the file. Uploading to a 3rd party sever is good for the client but painful for us, because we then have to deal with a multi-hour upload. Uploading to a third-part server would be less problematic if it could be made reliable and automatic, e.g. something like a Groove/SharePoint Workspace, simply drop the file in and wait for it to synchronize - but Groove has a 2Gb limit which is not big enough. So ideally I'd like a service with the following attributes: Must work for files of at least 5Gb, preferably 10Gb Once the transfer is started, it must be reliable (i.e. not sensitive to disconnections and service outages) and completely automatic Ideally, the sender would get a notification when the transfer completes. Has to work with Windows based systems. Any suggestions?

  Read the article

• High Apache CPU usage, but low nginx - Configured correctly?

  - by Buckers

  We've just moved a website of ours over to a brand new high-spec Linux server (1x Intel Xeon E3-1230 v2 @ 3.30GHz, 8GB DDR3 ECC, 2x 128GB SATA SSD RAID1). The server has been configured to use nginx but we're not sure if its working correctly. The site always loads very fast to us (http://www.onedirection.net), but Plesk often sends us reports that the Apache CPU usage percentage reaches high leves, yet when we look at the nginx percentage it's always very low. We've come from a Windows background so are very new to Linux, but shouldn't nginx run INSTEAD of apache? Here's a screenshot from Plesk showing the CPU usage: http://www.pixelkicks.co.uk/_download/plesk.JPG The website gets around 20,000 visitors per day, and we use W3 Total Cache to get it running as fast as possible. MySQL has been optimised well. Memory usage is only running at 2GB of the 8GB. Does this look right? How can we tell that nginx is doing most of the work? Thanks, Chris.

  Read the article

• Whitelist IP from google-authenticator in sshd pam

  - by spudwaffle

  My Ubuntu 12.04 server uses the google-authenticator pam module to provide two step authentication for ssh. I need to make it so that a certain IP does not need to type the verification code. The /etc/pam.d/sshd file is below: # PAM configuration for the Secure Shell service # Read environment variables from /etc/environment and # /etc/security/pam_env.conf. auth required pam_env.so # [1] # In Debian 4.0 (etch), locale-related environment variables were moved to # /etc/default/locale, so read that as well. auth required pam_env.so envfile=/etc/default/locale # Standard Un*x authentication. @include common-auth # Disallow non-root logins when /etc/nologin exists. account required pam_nologin.so # Uncomment and edit /etc/security/access.conf if you need to set complex # access limits that are hard to express in sshd_config. # account required pam_access.so # Standard Un*x authorization. @include common-account # Standard Un*x session setup and teardown. @include common-session # Print the message of the day upon successful login. session optional pam_motd.so # [1] # Print the status of the user's mailbox upon successful login. session optional pam_mail.so standard noenv # [1] # Set up user limits from /etc/security/limits.conf. session required pam_limits.so # Set up SELinux capabilities (need modified pam) # session required pam_selinux.so multiple # Standard Un*x password updating. @include common-password auth required pam_google_authenticator.so I've already tried adding a auth sufficient pam_exec.so /etc/pam.d/ip.sh line above the google-authenticator line, but I can't understand how to check an IP adress in the bash script.

  Read the article

• Acer Aspire One -- strange battery problem, charges only up to ~90%

  - by houbysoft

  I have this strange problem on the acer aspire one d250. It happened already once before, stayed for about two weeks, and then "fixed itself". The problem is as follows: the battery can't seem to get fully charged; ie the indicator is stuck at about 90% (it's probably not a software problem -- I have ArchLinux and Windows 7 installed and both report exactly the same) and it never passes that value, but it still shows the status as "charging" (I tried everything I could think of -- leaving it charging for extremely long amounts of time, doing a few complete charge-recharge cycles, removing/reinserting the battery, cleaning the connectors, even updating the BIOS, etc., and nothing helped). Also, when it is getting charged, it charges pretty fast until about 70% and then progresses extremely slowly. The battery holds the charge that appears on the battery indicator normally. Just can't get the battery to charge fully -- I can't get it past the 90%. At first I thought this would be a simple battery failure (even if the computer is not that old, about 6-7 months), but as I mentioned it happened once before, and then one day it fixed itself. I tried contacting Acer about this, but the support was not helpful, completely stupid, it seemed like they used canned responses, the usual. Any thoughts on how to fix this?

  Read the article

• Free or Open Solution for Storing and Charting CSV data

  - by rrrfusco

  I'm presently storing CSV files, combining them, opening them in open office, creating pivot tables and then generating charts from the spreadsheet. I've looked at OOBase, but appending csv files to base is clunky for some reason. SQLite seems like a good database solution, but I've haven't found a good charting program that connects to it with ease. Although open office (or libreoffice) maintains the references and allows you to update the information, this process is far from efficient. There are too many steps and it seems one program should handle all of these tasks. A better program would be more intuitive, allow you to simply add inserts into a database, and include an interface for standard charting settings. EDIT Simplest Automated Analysis and Chart Generation Tool? The above answer references Spotfire and Tableau, each of which has a free 14 and 30 day trial. Each program is nicely streamlined and designed. I'm looking for a program between this quality and LibreOffice. Can you recommend a better open or free desktop solution for windows?

  Read the article

• Is my dns server being attacked? And what should I do about it?

  - by Mnebuerquo

  I've been having some intermittent dns problems with a web server, where certain isp's dns servers don't have my hostnames in cache and fail to look them up. At the same time, queries to opendns for those hostnames resolve correctly. It's intermittent, and it always works fine for me, so it's hard to identify the problem when someone reports connectivity problems to my site. In trying to figure this out, I've been looking at my logs to see if there are any errors I should know about. I found thousands of the following messages in my logs, from different ip's, but all requesting similar dns records: May 12 11:42:13 localhost named[26399]: client 94.76.107.2#36141: query (cache) 'burningpianos.com/MX/IN' denied May 12 11:42:13 localhost named[26399]: client 94.76.107.2#29075: query (cache) 'burningpianos.com/MX/IN' denied May 12 11:42:13 localhost named[26399]: client 94.76.107.2#47924: query (cache) 'burningpianos.com/MX/IN' denied May 12 11:42:13 localhost named[26399]: client 94.76.107.2#4727: query (cache) 'burningpianos.com/MX/IN' denied May 12 11:42:14 localhost named[26399]: client 94.76.107.2#16153: query (cache) 'burningpianos.com/MX/IN' denied May 12 11:42:14 localhost named[26399]: client 94.76.107.2#40267: query (cache) 'burningpianos.com/MX/IN' denied May 12 11:43:35 localhost named[26399]: client 82.209.240.241#63507: query (cache) 'burningpianos.com/MX/IN' denied May 12 11:43:35 localhost named[26399]: client 82.209.240.241#63721: query (cache) 'burningpianos.org/MX/IN' denied May 12 11:43:36 localhost named[26399]: client 82.209.240.241#3537: query (cache) 'burningpianos.com/MX/IN' denied I've read of Dan Kaminski's dns cache poisoning vulnerability, and I'm wondering if these log records are an attempt by some evildoer to attack my dns server. There are thousands of records in my logs, all requesting "burningpianos", some for com and some for org, most looking for an mx record. There are requests from multiple ip's, but each ip will request hundreds of times per day. So this smells to me like an attack. What is the defense against this?

  Read the article

• Slow upload speeds with pfsense virtual appliance

  - by Justin Shin

  I have a pfSense virtual appliance set up in front of a Windows server. The pfSense appliance has been configured with two L2L IPSec VPN sites and not too much else. The appliance has two vNics which both exist on the same VLAN, but one is "WAN" and the other is "LAN." When I run speedtest.net on my Windows server when I have configured it to use a static WAN address and gateway, I get great speeds - maybe around 50 down, 15 up. However, when I configure it with a private IP address, I get similar download speeds but terrible upload speeds - around 2 or 3 Mbps consistently. I used Wireshark to see what gives but there didn't appear to be too much helpful information there, or I just could not find it. Besides the L2L VPNs, other configurations include: Automatic Outbound NAT Virtual P-ARP IP for the Windows Server WAN Firewall rule to allow * to * on RDP WAN Firewall rule to allow * to * (enabled this just for testing... didn't help!) No DHCP or any other services besides IPSec VPN No Errors LAN or WAN No collisions LAN or WAN I would be happy to post the full config file if it would help. I've been scratching my head at this one all day!

  Read the article

• How can I most efficiently batch resize images on a Mac?

  - by Nick Douglas

  I've been batch-resizing images through Preview (OS X) through the menu bar, but I want a simpler workflow, since I do this a dozen times a day. What I want: 1. Select a group of image files in finder 2. Hit a button or two (menu item or keyboard shortcut) to do the following: a. Scale all the pictures to 600 pixels wide b. Save as JPG files at 75% quality What I also want: - All of the above, plus step a(1): Crop images to 200 pixel height I can do all that manually, to a batch of files, through Preview. I can do it one at a time with some keyboard shortcuts in Photoshop or Pixelmator. Automator (using Preview) can scale to 600 pixels on the longest dimension, but it doesn't let me specify width. (It can scale specifically to width before cropping height.) It can change to JPG, but it can't specify image quality. And I can assign a keyboard shortcut to the whole process. Is that my best option on a Mac? Can I accomplish this more efficiently through another app like Quicksilver?

  Read the article

• Project and Business Document Organization

  - by dassouki

  How do you organize, maintain edits, revisions and the relationship between: Proposals Contracts Change Orders Deliverables Projects How do you organize your projects for re-usability? For example, is there a way to add tags to projects, to make them more accessible? What's a good data structure to dump all my files on an internet server for easy access? Presently, my work folder is setup as follows: (1)/work/ (2)/projects (3)/project_a (4)/final (which includes all final documents) (5)/contracts (5)/rfp_rfq (5)/change_orders (5)/communications (logs all emails, faxes, and meeting notes and minutes) (5)/financial (6)/paid (6)/unpaid (5)/reports (4)/old (include all documents that didn't make it into the project_a/final/ (3)/project_b (4) ... same as above ... (2)/references (3)/technical_references (3)/gov_regulations (3)/data_sources (3)/books (3)/topic_based (each area of my expertise has a folder with references in them) (2)/business_contacts (3)/contacts.xls (file contains all my contacts) (2)/banking (3)/banking.xls (contains a list of all paid and unpaid invoices as well as some cool stats) (3)/quicken (to do my taxes and yada yada) (4)/year (2)/education (courses I've taken (3)/webinars (3)/seminars (3)/online_courses (2)/publications (includes the publications I've made (3)/publication_id We're mostly 5 people working together part-time on this thing. Since this is a very structured approach, I find it really difficult to remember what I've done on previous projects and go back and forth easily. What are your suggestions on improving my processes? I'm open to closed and open source software (as long as the price isn't too high). I also want to implement a system where I can save most of the projects online to increase collaboration and efficiency and reduce bandwidth especially on document editing. Imagine emailing a document back and forth 5-10 times a day.

  Read the article

• Computer does not switch on after power outage

  - by cristian

  VOLTAGE DROP OFF FOR PC does not restart The other day my pc was turned off due to power outage. Since that time the computer would not turn on again, no sign of life, it seems dead. I did several tests, changed the power outlet and disconnect the wires ... also I have reseated the cards ... but the result is that nothing changes. What can I do? Could there may be damage to the hardware due to the power outage? Note: the voltage drop is not due to a lightning storm and so is not due to damaged components (burnt card etc ...) Original Text: l'altro giorno il pc mi si è spento improvvisamente per calo tensione.... da quel momento non si è piu' riacceso...nessun segnale di vita...sembra proprio morto. Ho fatto diverse prove, cambio presa di alimentazione, scollegare i fili...insomma ho "mischiato le carte"...ma il risultato è che non cambia nulla. Cosa posso fare? cosa puo' essere successo? Possono esserci danni hardware per il calo di tensione? NB: il calo di tensione non e' dovuto ad una saetta e quindi escluderei danni causa temporale (bruciature scheda ecc...) Grazie mille

  Read the article

• How to create an MST for silent install using Orca?

  - by Sanarothe

  Hi. I'm trying to deploy 7zip via GPO; I assigned the original MSI, but the package installation simply doesn't take place. What I've gathered is that I need to create an MST. In the spirit of trying to learn as much as possible about it, I've opted to use Orca rather than a third-party automagic tool, but I'm at a loss as to which fields to edit. So far the only change that I've made is to give the license accepted checkbox a value of "1" instead of pointing to another key that, still, just gave it a value of "1." So, to give this some structure, How does (Or what criteria should I consider) creating a MST make the install noninteractive/silent? Do you have to manually reconfigure the MSI to simply not perform the GUI aspects? Or do I have to execute the program in silent mode after defining the variables the the installer requests? (Though, of course, it seems that would defeat the purpose of the MST) How do I determine which fields I need to edit? I've loaded the installer and it takes three inputs: License acceptance, feature set and installation location. I want all of the default values: I'm just trying to deploy it at all, not customize the installation. I BELIEVE that I should be messing with some values in the Registry table, but I really don't know. If I'm not asking the right questions, can someone point me to a THOROUGH resource or documentation for this process? I've already gone over the technet articles on basic Orca use and deployment, but I couldn't really find anything on creating MST that didn't involve a third party program in which one runs a 'dummy' installer to get the before and after snapshots. Thank you very much, Cameron UPDATE: After spending the day troubleshooting, I finally got my server to send out 7zip, but not until I had also assigned firefox. Not sure why it didn't want to send out 7zip by itself, but I also had some domain naming problems. Thanks for the input (GPResult helped enormously.)

  Read the article

• Nagios NTP, discarding peer

  - by picca

  We're using nagios *check_ntp_time* for monitoring time on our servers. Unfortunately the service is flapping. And reporting a lot of false-positives. It happens everytime for random server in random day time and lasts for ~10-30 minutes. When the problem occurs we get: watch01:~ # /usr/lib/nagios/plugins/check_ntp_time -H lb01 -w 1 -c 2 -v sending request to peer 0 response from peer 0: offset 0.07509887218 sending request to peer 0 response from peer 0: offset 0.07508444786 sending request to peer 0 response from peer 0: offset 0.07499825954 sending request to peer 0 response from peer 0: offset 0.07510817051 discarding peer 0: stratum=0 overall average offset: 0 NTP CRITICAL: Offset unknown| When everything is ok, we get (I used different server to not have to wait): watch01:~ # /usr/lib/nagios/plugins/check_ntp_time -H web02 -w 1 -c 2 -v sending request to peer 0 response from peer 0: offset 0.0002282857895 sending request to peer 0 response from peer 0: offset 0.0002194643021 sending request to peer 0 response from peer 0: offset 0.0002347230911 sending request to peer 0 response from peer 0: offset 0.0002293586731 overall average offset: 0.0002282857895 NTP OK: Offset 0.0002282857895 secs|offset=0.000228s;1.000000;2.000000; We are using: check_ntp_time v1.4.15 (nagios-plugins 1.4.15) on Debian squeeze. Remote ntp daemon is: ntpd - NTP daemon program - Ver. 4.2.4p4 I already found some forums where the problem is described: 1, 2, 3. Every time they edvise to upgrade nagios-plugins, because in version prior to 1.4.13 there was a bug with inserted leap second. But we have already newer version of nagios-plugins.

  Read the article

• A separate user for each task?

  - by Mark Tomlin

  I just got a VPS sver the other day, I'm new to server administration, but not that new to Ubuntu (11.04). I use it in my living room as the HTPC, and I had a previous VPS that I used on and off for a team speak server. This one I'm setting up for long term use. So I would like to know the best practice when it comes to websites and tasks that I have the server proforming. I understand that it could be beneficial to separate each website into it's own usergroup or under its own username. I would setup nginx so that it could read all of the users directors (and thus each website) but could not touch anything else. The same with the TeamSpeak, should I make a user for TeamSpeak so that it operates within its own confined area or is this overkill? I do have access to root on the sever and my current plan is to run about 4 websites and a TeamSpeak server. My stack is Linux (Ubuntu 11.04 LTS), nginx, and PHP 5.4.3 (using the PDO SQLite 3 built in driver for the database). Should PHP have it's own user group or is it ok to place it in with nginx?

  Read the article

• Get details / solve issue with a kernel panic?

  - by Joseph

  I have a Lenovo T430 running Linux Mint 13 (MATE): joseph:~$ uname -a Linux joseph-T430-LM 3.2.0-23-generic #36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux I installed Mint immediately after getting the laptop about two weeks ago, and have noticed that about once a day, the computer will completely freeze up- I can't use Ctrl+Alt+Backspace to restart X, I can't use Ctrl+Alt+F1 to get a text only terminal, can't move mouse, can't type, and if any music was playing it just gets stuck in about a 1-second loop. There is a Windows partition, but I haven't had any issues in Windows. I couldn't find a common thread between the freezes, they were seemingly random (sometimes right after I clicked the mouse, sometimes not; sometimes with Pandora/flash being used, sometimes not, etc). I assume they're kernel panics since it completely locks up, but the laptop doesn't have a capslock or scroll lock LED. It is on a dock and I do have a USB keyboard, but the scroll lock/capslock lights do not flash when it happens (not sure if this is indicating its not a kernel panic, or if the kernel panic just wouldn't illuminate the LEDs on a usb keyboard attached to a laptop dock). This was annoying but not terrible. However, I've found a way to reproduce it. I have a particular CSV file that when I open up in LibreOffice Calc and scroll around, the same thing happens- complete lock up. I really need to use this file, so I'd like to fix the issue, but at the least it's given me a test case to work with. So, having a case where I can cause this issue, what can I do to better find out what's going on? I've looked in /var/log/syslog but haven't found anything seemingly useful. Any thoughts?

  Read the article

• RSA keys - virtual hosts

  - by Bosworth99

  Pardon my noobness, but I just got started with VPS (linux) hosting; setting up passwordless ssh for multiple users has proved to be kind of a pain. Currently I'm the single user of this ubuntu 10.04 LTS VPS (linode.com). I was able to establish a single rsa passkey under my home/user/.ssh/authorized_keys location. Fine. PuTTy works as expected, and Filezilla (sftp) links up as required. I've been working on a single site that this user owns, and thats not been a problem. Now, I want to set up some other sites, and I've chosen Webmin with the VirtualMin plugin to make this work. I made another user (or, rather, virtualmin did), but I've been unable to get FileZilla to link up to this new user. Could anyone with experience here explain what the setup is supposed to look like? IE - can I use a single rsa key pair for all accounts (if, for example, I give ownership of files to the original user?). Or is it standard practice to create a separate key pair for each user, and establish a separate putty/filezilla login for each? I've spent enough time dinking around with this to be frustrated. "Sever rejected the provided key" error sucks after the fifth hour. I'm about to set up an ftp server and call it a day. Any thoughts would be most welcome -

  Read the article

• Lost partition after restarting

  - by nxhoaf

  I have Window 7 Professional Service pack installed in my Laptop Lenovo Thinkpad t420. After formatting the disk, and install Window 7 (detailed as above), I went to Computer -- Manager -- Storage -- Disk Management to split my 300gb C partition into 2 partition: C (which is 162gb) E (which is 140gb) Is work fine for about 2 days. Today, when I turn on my computer, I'm very suprise that the E partition is disappear. I can surely confirm that I didn't do any stupid thing yesterday. And before I shut down my computer, everything was fine. In general, here is what I did during the last today (from the point that I formatted the disk, and installed Window) Format 300gb hard disk Install window 7 Install eclipse, db2, .... ( I'm a developer) Install some other tools (Open office, Skype...) Install PGP (http://www.symantec.com/encryption) <--- I'm forced to used that due to my company policy Use Computer -- Manager -- Storage -- Disk Management to split my 300gb C partition into 2 partition as described above. It worked quite well for two last days. Until day... Can you please help me to recover my lost partition ? Thank you! For more info, here is my partition info: You can also see the image here

  Read the article

• "Run As Administrator" on program right click failing and not launching program

  - by GONeale

  This problem lies within a relatively fresh x64 Windows 7 install ~4 weeks, but is also a problem I have seen on Windows Vista machines (x86 versions). Since the other day, any programs attempted to be launched via right clicking on a shortcut (.lnk)'s context menu and pressing - "Run As Administrator" for instance, in the Quick Launch/Jump List in Windows 7 has failed, screen has not dimmed, no UAC popup. In fact the program does not even load. There is no way around this unless I use the shortcut version from "All Programs" which appears to work, very strange? I have performed no major software installs, nothing out of the ordinary. Has anybody encountered this or know what would be causing it? Here's an example of somebody else experiencing this problem in Vista with no solution: http://www.vistax64.com/vista-general/131918-strange-run-administrator-problem.html and I believe this problem is related, I also cannot right click - "Manage" on my computer): http://windows7forums.com/windows-7-support/5501-run-administrator-broken.html I am running the latest version of Avira AntiVir Virus Scanner and pretty concious of what I download, I don't think it is a virus, nor do I believe it is due to the RC Version of Windows 7, because I have seen the problem across multiple Operating Systems versions. Thanks guys.

  Read the article

• charging light on in laptop with battery removed.

  - by Jus12

  I hope this is the right place for this question. I have an LG R310 laptop. Recently the adapter connector started playing up, so I got a second hand replacement adapter of the same rating. The adapter was a cheap type (I know I made a mistake) and faulty.. it made a low buzzing sound when plugged in and not connected to the laptop. It didn't make the noise when connected to the laptop. Foolishly I used this adapter for several weeks. One day the adapter stopped working. The led didnt work and it was not charging. It had also drained the laptop's battery to 0%. I then got an original replacement adapter. Now I can use the laptop on power but the battery does not charge. The charging light does not come on. The interesting thing is that when I remove the battery the charging light comes on and stays on after I insert the battery back (the battery still does not charge). I need to know if the faulty adapter damaged the motherboard or if its just a problem with the battery. I have a multimeter and I prefer not to open the laptop. Thanks in advance.

  Read the article

• How to monitor process hogging CPU on a remote server

  - by sergeb

  I have a remotely hosted (virtual, VMware) dedicated server (Windows 2008 Server Web edition w/ SP1) that I can only connect to over Remote Desktop. Lately, a process hogs CPU for ~40 minutes most every day (at a random hour) and brings all web sites on the server down. While this is going on I also cannot connect using Remote Desktop to investigate on what is that process... Promptly after 40 min I can RD and the first thing I see on the Perf Monitor is that there was something topping the CPU at 100% and stops just before I'm able to RD... I'm aware of the beginning and end of this for I have monitors setup that email me up/down status of the web sites but I'm locked out while this is happening - can't RD to the server until it's over (and too late to see the Task Manager/Process Explorer picture). What is the best way/tool to setup on the server to continuously monitor all processes so when this happens I login and "replay" it to find the process causing this trouble? (I have no control over the virtual/VMware setup for it is hosted by a 3rd-party but I have most full control over my dedicated machine) Thanks in advance!

  Read the article

• where is memory gone (no, not buffers or cache)

  - by Marki

  can anyone tell me where the memory is gone: (no, this time neither buffers nor cache) # free total used free shared buffers cached Mem: 3928200 3868560 59640 0 2888 92924 -/+ buffers/cache: 3772748 155452 Swap: 4192956 226352 3966604 top, sorted by memory, descending: top - 13:42:06 up 1 day, 3:47, 2 users, load average: 0.08, 0.12, 0.36 Tasks: 228 total, 1 running, 227 sleeping, 0 stopped, 0 zombie Cpu0 : 2.0%us, 4.0%sy, 0.0%ni, 90.1%id, 0.0%wa, 0.0%hi, 4.0%si, 0.0%st Cpu1 : 0.0%us, 0.0%sy, 0.0%ni, 0.0%id,100.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 3928200k total, 3868020k used, 60180k free, 2896k buffers Swap: 4192956k total, 226048k used, 3966908k free, 82068k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 3863 root 20 0 902m 199m 3296 S 7 5.2 99:08.77 ndsd 21906 root 20 0 138m 9076 2988 S 0 0.2 0:00.02 sfcbd 2332 root 20 0 126m 4660 1332 S 0 0.1 0:17.72 mono 4243 wwwrun 20 0 683m 4468 668 S 0 0.1 0:07.38 java 2994 root 20 0 202m 2288 1660 S 0 0.1 6:10.02 httpstkd 4338 root 20 0 184m 2240 1112 S 0 0.1 0:00.52 namcd 21898 root 20 0 32368 1832 1256 R 1 0.0 0:00.08 top In fact, some time ago oom kicked in and crashed the system (kernel panic), and I'm afraid we're again not far from that point.... UPDATE # cat /proc/meminfo MemTotal: 3928200 kB MemFree: 51336 kB Buffers: 2964 kB Cached: 72876 kB SwapCached: 29128 kB Active: 233440 kB Inactive: 88040 kB Active(anon): 188920 kB Inactive(anon): 56752 kB Active(file): 44520 kB Inactive(file): 31288 kB Unevictable: 0 kB Mlocked: 0 kB SwapTotal: 4192956 kB SwapFree: 3966824 kB Dirty: 32 kB Writeback: 0 kB AnonPages: 225112 kB Mapped: 11356 kB Shmem: 32 kB Slab: 1624080 kB SReclaimable: 13740 kB SUnreclaim: 1610340 kB KernelStack: 4176 kB PageTables: 10500 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 6157056 kB Committed_AS: 2397684 kB VmallocTotal: 34359738367 kB VmallocUsed: 441372 kB VmallocChunk: 34359246755 kB HardwareCorrupted: 0 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB DirectMap4k: 10240 kB DirectMap2M: 4184064 kB slabtop Active / Total Objects (% used) : 9041019 / 9207548 (98.2%) Active / Total Slabs (% used) : 401132 / 401156 (100.0%) Active / Total Caches (% used) : 91 / 159 (57.2%) Active / Total Size (% used) : 1491537.88K / 1519791.56K (98.1%) Minimum / Average / Maximum Object : 0.02K / 0.17K / 4096.00K OBJS ACTIVE USE OBJ SIZE SLABS OBJ/SLAB CACHE SIZE NAME 4240470 4240319 99% 0.12K 141349 30 565396K pid 2245140 2219675 98% 0.25K 149676 15 598704K size-256 2238090 2210087 98% 0.12K 74603 30 298412K size-128 ...

  Read the article

• How can ICS in Windows 7 be managed via command line, scripts, config files, etc.?

  - by Skya

  I've been using ICS successfully for years, but now I'm looking for a way to control it through something else than the GUI in Control Panel\Network and Internet\Network Connections - Connection Properties: I want to do everything that the encircled checkbox does, without touching the GUI. But what does the checkbox do? Microsoft don't provide specific information and the most helpful forum post I've found is from 2003. Assuming that some of the advice is still valid, I've come to the conclusion that ICS is broken down into 6 parts that have to be set up individually: the sharedAccess service interface settings firewall rules a static route dnsproxy autodhcp I've already learned that the service can be started/stopped with the command net start/stop sharedAccess and that netsh is a good tool for changing the interface settings and the firewall rules. But I don't understand how ICS handles routing and DNS. All hosts in my network are configured statically, so I don't care much about autodhcp. Thanks for your help! EDIT: I've spent the whole day scanning through ProcMon and I've seen reads/writes to both the registry and the filesystem and it is difficult to determine what parts of it actually make ICS work. I'm trying to look for an API instead. I'm looking into this right now, but I still want to know more about the inner workings.

  Read the article

• Can't Login to phpPgAdmin

  - by Devin

  I'm trying to set up phpPgAdmin on my test machine so that I can interface with PostgreSQL without always having to use the psql CLI. I have PostgreSQL 9.1 installed via the RPM repository, while I installed phpPgAdmin 5.0.4 "manually" (by extracting the archive from the phpPgAdmin website). For the record, my host OS is CentOS 6.2. I made the following configuration changes already: PostgreSQL Inside pg_hba.conf, I changed all METHODs to md5. I gave the postgres account a password I added a new account named webuser with a password (note that I did not do anything else to the account, so I can't exactly say that I know what permissions it has and all) phpPgAdmin config.inc.php Changed the line $conf['servers'][0]['host'] = ''; to $conf['servers'][0]['host'] = '127.0.0.1'; (I've also tried using localhost as the value there). Set $conf['extra_login_security'] to false. Whenever I try to log in to phpPgAdmin, I get "Login failed", even if I use successful credentials (ones that work in psql). I've tried to go through some of the steps noted in Question 3 in the FAQ, but it hasn't worked out well so far there. It likely does not help that this is my first day working with PostgreSQL. I'm farily familiar with MySQL, but I have to use PostgreSQL for the project I'm working on. Could anyone offer some help for how to set up phpPgAdmin on CentOS 6.2? If I've done something terribly wrong in my configuration so far, it's no big deal to blow something/everything away, as it's not like I've stored any data there yet! I appreciate any insight you may have!

  Read the article

< Previous Page | 325 326 327 328 329 330 331 332 333 334 335 336  | Next Page >