Search Results

Search found 9963 results on 399 pages for 'special commands'.

Page 329/399 | < Previous Page | 325 326 327 328 329 330 331 332 333 334 335 336  | Next Page >

• Set up Gitosis, but can't clone

  - by Tim Rupe

  I've set up Gitosis on a remote Ubuntu box which I will refer to as linuxserver as my host in the following commands. I'm also connecting from a Windows box using Cygwin. I followed the instructions according to: http://scie.nti.st/2007/11/14/hosting-git-repositories-the-easy-and-secure-way I had no problems up until I needed to clone the gitosis-admin repository to my local machine git clone git@linuxserver:gitosis-admin.git When I do this, the command executes, but hangs there displaying nothing until I ctrl-c to get back to a command prompt. No messages are displayed at all. I'm pretty sure I have my ssh keys set up properly, because logging in using "ssh linuxserver" into my regular account works perfectly without asking for a password. Edit: Over the weekend I set up a near identical Ubuntu box at home, and had no problem setting up Gitosis. The only difference was that I was connecting from OSX instead of Cygwin. Edit: I've also discovered that when using the Bash Shell provided with "Git Extensions", I have no problems, so the issue definitely seems to be some kind of Cygwin conflict. Edit: Just an update, but about a month after posting this question, I switched to Mercurial, and found that I prefer it much more than git. Thanks for the suggestions, but I don't plan on going back to git to try any of them out.

  Read the article

• Debugging in VS 2008 locks a stored procedure

  - by larryq

  Hi everyone, I've got a strange one here. I have a .Net executable that, under the hood, calls a few stored procedures. For whatever reason, one of the stored procs hangs when I'm debugging. If I run the executable outside of visual studio things go fine, including this stored proc. It's when I'm debugging that this hangs, and it really hangs. If I stop the debugging session the IDE freezes and I have to kill it via taskmanager. I know which stored procedure has the trouble, as well as the actual statement within it that's the problem. It's calling an update statement that doesn't stand out as particularly special. I can run the identical statement (and the stored procedure itself) from SQL management studio wtih no problem. And, as I mentioned, the exe runs just fine outside the debugger. If I use the SQL activity monitor to see why things are hanging, the wait type says PREEMPTIVE_DEBUG. I'm not sure if that's helpful but if you need more info I'll try to get it to you. I've rebooted my machine (the SQL Server in question is on this box as well) and that didn't do anything, nor did rebuilding the executable. I'm scratching my head on this one and if you have any ideas what to check on next, I'm be happy to listen. Thanks!

  Read the article

• How to force the build to be out of date, when a text file is modified?

  - by demoncodemonkey

  The Scenario My project has a post-build phase set up to run a batch file, which reads a text file "version.txt". The batch file uses the information in version.txt to inject the DLL with a version block using this tool. The version.txt is included in my project to make it easy to modify. It looks a bit like this: @set #Description="TankFace Utility Library" @set #FileVersion="0.1.2.0" @set #Comments="" Basically the batch file renames this file to version.bat, calls it, then renames it back to version.txt afterwards. The Problem When I modify version.txt (e.g. to increment the file version), and then press F7, the build is not seen as out-of-date, so the post-build step is not executed, so the DLL's version doesn't get updated. I really want to include the .txt file as an input to the build, but without anything actually trying to use it. If I #include the .txt file from a CPP file in the project, the compiler fails because it obviously doesn't understand what "@set" means. If I add /* ... */ comments around the @set commands, then the batch file has some syntax errors but eventually succeeds. But this is a poor solution I think. So... how would you do it?

  Read the article

• Using FBML in a ruby sinatra app

  - by Gearóid

  Hi, I'm building an application in ruby using the sinatra framework and am having trouble with rendering some fbml elements. I'm currently trying to render an fb:multi-friend-selector so the user can select which friends they want to invite. However, when I write the following in my code: <fb:fbml> <fb:request-form action="/inviteFriends" method="POST" invite="true" type="MY APP" content="Invite Friends" > <fb:multi-friend-selector showborder="false" actiontext="Invite your friends to use YOUR APP NAME."> </fb:request-form> </fb:fbml> Nothing renders with the text above. I've included the regular facebook xsds for the taglibs in my html tag and have tested fbml on the page using the following code: <fb:name useyou="false" uid="USER_ID" linked="false"/> This code works correctly and displays the user's name. I've tried a simple example like that on http://wiki.developers.facebook.com/index.php/Fb:random but again nothing is rendered in the browser. Do I need to include some special javascript or anything? I would greatly appreciate some help with this. Thanks in advance -gearoid.

  Read the article

• Are there scenarios where the ViewModel needs to invoke methods on the View w.r.t. MVVM in WPF?

  - by Gishu

  As per the pattern, the ViewModel exposes Properties(with change notification) and Commands (to notify the VM of user actions) that the View binds to. The only communication that flows from the VM to the View is the property change notifications (so that the View can refresh itself with updated data). In MVP or PresentationModel form of the pattern (if I'm not mistaken), the View implements a plain vanilla interface (consisting of methods, properties and/or events). With MVVM, it feels methods on the IView have been outlawed (along with IView itself). One scenario I could think of was to set the focus to a certain control in the View. (When the user does ActionX, the focus should immediately be set to FieldY). In MVP, I'd write this as IView.ActivateField(NameConstant), which the presenter or PM would invoke. In MVVM, this seems to be a fringe case that needs a workaround / little bit of code-behind. The VM implements an ActiveField Property, which it sets to NameConstant. The view picks up the change notification event and in a code-behind event handler, activates the Name control. Is the above just an exception to the norm? Or are there other such scenarios, where the VM needs to invoke a method on the View ?

  Read the article

• Using pipes in Linux with C

  - by Dave

  Hi, I'm doing a course in Operating Systems and we're supposed to learn how to use pipes to transfer data between processes. We were given this simple piece of code which demonstrates how to use pipes,but I'm having difficulty understanding it. #include <stdio.h> #include <stdlib.h> #include <unistd.h> main() { int pipefd [2], n; char buff[100] ; if( pipe( pipefd) < 0) { printf("can not create pipe \n"); } printf("read fd = %d, write fd = %d \n", pipefd[0], pipefd[1]); if ( write (pipefd[1],"hello world\n", 12)!= 12) { printf("pipe write error \n"); } if( ( n = read ( pipefd[0] , buff, sizeof ( buff) ) ) <= 0 ) { printf("pipe read error \n"); } write ( 1, buff, n ) ; exit (0); } What does the write function do? It seems to send data to the pipe and also print it to the screen (at least it seems like the second time the write function is called it does this). Does anyone have any suggestions of good websites for learning about topics such as this, FIFO, signals, other basic linux commands used in C?

  Read the article

• Strange File Upload issue with asp.net site on a web farm

  - by Coov

  I have a basic asp.net file upload page. When I test file uploads from my local machine, it works fine. When I test file uploads from our dev machine, it works fine. When I deploy the site to our production webfarm, it behaves strangely. If I access the site from off the network, I can load file-after-file without issue. If I access the site from within our network, I can load the first file just fine but any subsequent files result it a bad sequence of commands error. I'm not sure if this is web farm issue, a network issue, or something else. It feels like a connection is not being disposed of properly but it doesn't make sense why everything works fine remotely. Markup: <asp:FileUpload ID="FileUpload1" runat="server" Width="350px" /> <asp:Button ID="btnSubmit" runat="server" Text="Upload" onclick="btnSubmit_Click" /> Code: if (FileUpload1.HasFile) { FtpWebRequest ftpRequest; FtpWebResponse ftpResponse; ftpRequest = (FtpWebRequest)FtpWebRequest.Create(new Uri("ftp://ftp.myftpsite.com/" + FileUpload1.FileName)); ftpRequest.Method = WebRequestMethods.Ftp.UploadFile; ftpRequest.Proxy = null; ftpRequest.UseBinary = true; ftpRequest.Credentials = new NetworkCredential("username", "password"); ftpRequest.KeepAlive = false; byte[] fileContents = new byte[FileUpload1.PostedFile.ContentLength]; using (Stream fr = FileUpload1.PostedFile.InputStream) { fr.Read(fileContents, 0, FileUpload1.PostedFile.ContentLength); } using (Stream writer = ftpRequest.GetRequestStream()) { writer.Write(fileContents, 0, fileContents.Length); } ftpResponse = (FtpWebResponse)ftpRequest.GetResponse(); Response.Write(ftpResponse.StatusDescription); }

  Read the article

• XmlHttpRequest in a bookmarklet returns empty responseText on GET?

  - by David Eyk

  I'm trying to build a javascript bookmarklet for a special URL shortening service we've built at http://esv.to for shortening scripture references (i.e. "Matthew 5" becomes "http://esv.to/Mt5". The bookmarklet is supposed to do a GET request to http://api.esv.to/Matthew+5, which returns a text/plain response of http://esv.to/Mt5. The code for the bookmarklet itself looks like this (expanded for readability): var body = document.getElementsByTagName('body')[0], script = document.createElement('script'); script.type = 'text/javascript'; script.src = 'http://esv.to/media/js/bookmarklet.js'; body.appendChild(script); void(0); The code from http://esv.to/media/js/bookmarklet.js looks like this: (function() { function shorten(ref, callback) { var url = "http://esv.to/api/" + escape(ref); var req = new XMLHttpRequest(); req.onreadystatechange = function shortenIt() { if ( this.readyState == 4 && this.status == 200 ) { callback(req.responseText); }; }; req.open( "GET", url ); req.send(); }; function doBookmarklet() { var ref = prompt("Enter a scripture reference or keyword search to link to:", "") shorten(ref, function (short) { prompt("Here is your shortened ESV URL:", short); }); }; doBookmarklet(); })(); When called from http://esv.to itself, the bookmarklet works correctly. But when used on another page, it does not. The strange thing is, when I watch the request from Firebug, the response is 200 OK, the browser downloads 17 bytes (the length of the returned string), but the response body is empty! No error is thrown, just an empty responseText on the XmlHttpRequest object. Now, according to http://stackoverflow.com/questions/664689/ajax-call-from-bookmarklet, GET shouldn't violate the same origin policy. Is this a bug? Is there a workaround?

  Read the article

• Embedding/deploying custom font in .NET app

  - by Swingline Rage

  Is there an official way to distribute (deploy) a specific font with a .NET application? We have a (public domain) "LED font" that prints numbers with the retro LED instrumentface look. This is a standard True Type or Open Type font like any other except it looks funky. Obviously for that to work, this font needs to be on the user's machine. But we'd prefer to not force the user to "install our special font into your font folder". We'd prefer to either load a Font object directly from the TTF, or programatically install the font so it's available. How do applications handle this sort of things? Eg, I notice Adobe XYZ installs various fonts on the system without user intervention. That's what we'd like to do. EDIT: okay, ideally, we'd prefer not to install the font directly. We don't want our nifty themed LED font showing up in the user's font dropdown in MS Word. We'd prefer to use this font, but restrict its use or appearance to our app. Any way to do this? Thanks!

  Read the article

• How to fix codesign when it says user cancelled the operation? (And I didn't)

  - by eipipuz

  I'm compiling an iPhone app meant to be Distributed. It's my first app so I followed the "iPhone Provisioning Profiles" instructions. Unfortunately it fails with this: CodeSign build/*_*_.app cd "/Users/videojuegos/Documents/*_*_" setenv IGNORE_CODESIGN_ALLOCATE_RADAR_7181968 /Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/codesign_allocate setenv PATH "/Developer/Platforms/iPhoneOS.platform/Developer/usr/bin:/Developer/usr/bin:/usr/bin:/bin:/usr/sbin:/sbin" /usr/bin/codesign -f -s "iPhone Distribution: ******" "--resource-rules=/Users/videojuegos/Documents/*_*_/build/*_*_.app/ResourceRules.plist" --entitlements "/Users/videojuegos/Documents/*_*_/build/Unity-iPhone.build/Distribution-iphoneos/Unity-iPhone.build/*_*_.xcent" "/Users/videojuegos/Documents/*_*_/build/*_*_.app" /Users/videojuegos/Documents/*_*_/build/*_*_.app: The operation was cancelled by the user. Command /usr/bin/codesign failed with exit code 1 I thought Keychain wasn't allowing Codesign to work but as far as I can tell that isn't the case. I also attempted running these commands from a terminal and it failed with this message: Users/videojuegos/Documents/*_*_/build/Unity-iPhone.build/Distribution-iphoneos/Unity-iPhone.build/*_*_.xcent: cannot read entitlement data I have made the xcode setting from scratch three times. Googled it. No results. I don't have any idea what else to try. Any suggestions?

  Read the article

• Java and .net interoperability

  - by dineshrekula

  I have a c# program through which i am opening cmd window as a a process. in this command window i am running a batch file. i am redirecting the output of that batch file commands to a Text File. When i run my application everything seems to be ok. But few times, Application is giving some error like "Can't access the file. it's being used by another application" at the same time cmd window is not getting closed. If we close the cmd process through the Task Manager, then it's writing the content to the file and getting closed. Even though i closed the cmd process, still file handle is not getting released. so that i am not able to run the application next time onwards.Always it's saying Can't access the file. Only after restarting the system, it's working. Here is my code: Process objProcess = new Process(); ProcessStartInfo objProInfo = new ProcessStartInfo(); objProInfo.WindowStyle = ProcessWindowStyle.Maximized; objProInfo.UseShellExecute = true; objProInfo.FileName = "Batch file path" objProInfo.Arguments = "Some Arguments"; if (Directory.Exists(strOutputPath) == false) { Directory.CreateDirectory(strOutputPath); } objProInfo.CreateNoWindow = false; objProcess.StartInfo = objProInfo; objProcess.Start(); objProcess.WaitForExit(); test.bat: java classname argument > output.txt Here is my question: I am not able to trace where the problem is.. How we can see the process which holding handle on ant file. Is there any suggestions for Java and .net interoperability

  Read the article

• jQuery Tabs remove icon

  - by mare

  Using jQuery Tabs script with an icon to remove the tab but this code renders differntly in IE8 and Firefox 3.6.2. The problem is that Firefox wraps the tab and puts "X" signs in new row, whicle IE correctly renders it in the same row (but not centered vertically as it should but rather in the top right corner - which is still better than Firefox behaviour). I have spent the last hour trying to find out if the problems lies in CSS (both with Firebug and IE's Developer Toolbar) but there is nothing special in CSS, just the default jQuery Flick UI CSS. <div id="tabgroup.<%= Model.Slug %>"> <ul> <% foreach (ContentListItem tab in Model.Contains) {%> <li><a href="#tab\.<%=tab.Slug%>"> <%=tab.Title%></a><% if (Context.User.IsInRole("Administrators")) { %><span class="ui-icon ui-icon-close"><%=Resources.Localize.Routes_TabDelete %></span><% } %> </li> <% }%> </ul> <% foreach (ContentListItem tab in Model.Contains) { Html.RenderAction("Display", "Tab", new { slug = tab.Slug }); }%> </div> Please disregard the stuff about ASP.NET MVC code...

  Read the article

• MVVM-Light EventToCommand Behavior for CheckBox Checked/Unchecked in Silverlight

  - by George Durzi

  I would like to handle the Checked and Unchecked events of a Checkbox control and execute a command in my ViewModel. I wired up an EventTrigger for both the Checked and Unchecked events as follows: <CheckBox x:Name="chkIsExtendedHr" IsChecked="{Binding Schedule.Is24Hour, Mode=TwoWay}"> <i:Interaction.Triggers> <i:EventTrigger EventName="Checked"> <GalaSoft_MvvmLight_Command:EventToCommand CommandParameter="{Binding IsChecked, ElementName=chkIsExtendedHr}" Command="{Binding Path=SetCloseTime, Mode=OneWay}" /> </i:EventTrigger> <i:EventTrigger EventName="Unchecked"> <GalaSoft_MvvmLight_Command:EventToCommand CommandParameter="{Binding IsChecked, ElementName=chkIsExtendedHr}" Command="{Binding Path=SetCloseTime, Mode=OneWay}" /> </i:EventTrigger> </i:Interaction.Triggers> </CheckBox> I defined a RelayCommand in my ViewModel and wired up an action for it: public RelayCommand<Boolean> SetCloseTime{ get; private set; } ... SetCloseTime= new RelayCommand<bool>(ExecuteSetCloseTime); The parameter in the action for the command always resolves to the previous state of the CheckBox, e.g. false when the CheckBox is checked, and true when the CheckBox is unchecked. void ExecuteSetCloseTime(bool isChecked) { if (isChecked) { // do something } } Is this expected behavior? I have a workaround where I have separate triggers (and commands) for the Checked and Unchecked and use a RelayCommand instead of RelayCommand<bool>. Each command executes correctly when the CheckBox is checked and unchecked. Feels a little dirty though - even dirtier than having UI code in my ViewModel :) Thanks

  Read the article

• SQL Server insert performance

  - by Jose

  I have an insert query that gets generated like this INSERT INTO InvoiceDetail (LegacyId,InvoiceId,DetailTypeId,Fee,FeeTax,Investigatorid,SalespersonId,CreateDate,CreatedById,IsChargeBack,Expense,RepoAgentId,PayeeName,ExpensePaymentId,AdjustDetailId) VALUES(1,1,2,1500.0000,0.0000,163,1002,'11/30/2001 12:00:00 AM',1116,0,550.0000,850,NULL,@ExpensePay1,NULL); DECLARE @InvDetail1 INT; SET @InvDetail1 = (SELECT @@IDENTITY); This query is generated for only 110K rows. It takes 30 minutes for all of these query's to execute I checked the query plan and the largest % nodes are A Clustered Index Insert at 57% query cost which has a long xml that I don't want to post. A Table Spool which is 38% query cost <RelOp AvgRowSize="35" EstimateCPU="5.01038E-05" EstimateIO="0" EstimateRebinds="0" EstimateRewinds="0" EstimateRows="1" LogicalOp="Eager Spool" NodeId="80" Parallel="false" PhysicalOp="Table Spool" EstimatedTotalSubtreeCost="0.0466109"> <OutputList> <ColumnReference Database="[SkipPro]" Schema="[dbo]" Table="[InvoiceDetail]" Column="InvoiceId" /> <ColumnReference Database="[SkipPro]" Schema="[dbo]" Table="[InvoiceDetail]" Column="InvestigatorId" /> <ColumnReference Column="Expr1054" /> <ColumnReference Column="Expr1055" /> </OutputList> <Spool PrimaryNodeId="3" /> </RelOp> So my question is what is there that I can do to improve the speed of this thing? I already run ALTER TABLE TABLENAME NOCHECK CONSTRAINTS ALL Before the queries and then ALTER TABLE TABLENAME NOCHECK CONSTRAINTS ALL after the queries. And that didn't shave off hardly anything off of the time. Know I am running these queries in a .NET application that uses a SqlCommand object to send the query. I then tried to output the sql commands to a file and then execute it using sqlcmd, but I wasn't getting any updates on how it was doing, so I gave up on that. Any ideas or hints or help?

  Read the article

• Unable to find reference to std library math function inside library

  - by Alex Marshall

  Hello, I've got several programs that use shared libraries. Those shared libraries in turn use various standard C libraries. ie Program A and Program B both use Shared Library S. Shared Library S uses std C math. I want to be able to statically link Shared Library S against the standard library, and then statically link Programs A and B against S so that I don't have to be dragging around the library files, because these programs are going to be running on an embedded system running BusyBox 0.61. However, when I try to statically link the programs against Shared Library S, I get an error message from GCC stating : ../lib/libgainscalecalc.a(gainscalecalc.): In function 'float2gs': [path to my C file].c:73: undefined reference to 'log' Can somebody please help me out ? The make commands I'm using are below : CFLAGS += -Wall -g -W INCFLAGS = -I$(CROSS_INCLUDE)/usr/include LIBFLAGS += -L$(CROSS_LIB)/usr/lib -lm gainscalecalc_static.o: gainscalecalc.c $(CC) $(CFLAGS) -c $< -I. $(INCFLAGS) -o $@ gainscalecalc_dynamic.o: gainscalecalc.c $(CC) $(CFLAGS) -fPIC -c $< -o $@ all: staticlib dynamiclib static_driver dynamic_driver clean: $(RM) *.o *.a *.so *~ driver core $(OBJDIR) static_driver: driver.c staticlib $(CC) $(CFLAGS) -static driver.c $(INCFLAGS) $(LIBFLAGS) -I. -L. -lgainscalecalc -o $@ dynamic_driver: driver.c dynamiclib $(CC) $(CFLAGS) driver.c -o $@ -L. -lgainscalecalc staticlib: gainscalecalc_static.o $(AR) $(ARFLAGS) libgainscalecalc.a gainscalecalc_static.o $(RANLIB) libgainscalecalc.a chmod 777 libgainscalecalc.a dynamiclib: gainscalecalc_dynamic.o $(CC) -shared -o libgainscalecalc.so gainscalecalc_dynamic.o chmod 777 libgainscalecalc.so Edit: Linking against the shared libraries compiles fine, I just haven't tested them out yet

  Read the article

• Does LaTeX have an array data structure?

  - by drasto

  Are there arrays in LaTeX? I don't mean the way to typeset arrays. I mean arrays as the data structure in LaTeX/TeX as a "programming language". I need to store a number of vbox-es or hbox-es in an array. It may be something like "an array of macros". More details: I have an environment that should typeset songs. I need to store some songs' paragraphs given as arguments to my macro \songparagraph (so I will not typeset them, just store those paragraphs). As I don't know how many paragraphs can be in one particular song I need an array for this. When the environment is closed, all the paragraphs will be typeset - but they will be first measured and the best placement for each paragraph will be computed (for example, some paragraphs can be put one aside the other in two columns to make the song look more compact and save some space). Any ideas would be welcome. Please, if you know about arrays in LaTeX, post a link to some basic documentation, tutorial or just state basic commands.

  Read the article

• Is there a library that can decompile a method into an Expression tree, with support for CLR 4.0?

  - by Daniel Earwicker

  Previous questions have asked if it is possible to turn compiled delegates into expression trees, for example: http://stackoverflow.com/questions/767733/converting-a-net-funct-to-a-net-expressionfunct The sane answers at the time were: It's possible, but very hard and there's no standard library solution. Use Reflector! But fortunately there are some greatly-insane/insanely-great people out there who like reverse engineering things, and they make difficult things easy for the rest of us. Clearly it is possible to decompile IL to C#, as Reflector does it, and so you could in principle instead target CLR 4.0 expression trees with support for all statement types. This is interesting because it wouldn't matter if the compiler's built-in special support for Expression<> lambdas is never extended to support building statement expression trees in the compiler. A library solution could fill the gap. We would then have a high-level starting point for writing aspect-like manipulations of code without having to mess with raw IL. As noted in the answers to the above linked question, there are some promising signs but I haven't succeeded in finding if there's been much progress since by searching. So has anyone finished this job, or got very far with it? Note: CLR 4.0 is now released. Time for another look-see.

  Read the article

• Why does only youtube embeds work on iPad?

  - by Nagaraj Hubli

  I am trying to find out as to why youtube embeds works just fine on iPad, and not the embeds of any other video site. Example of youtube embed: <object width="640" height="385"> <param name="movie" value="http://www.youtube.com/v/DlIU5TgwEFg&color1=0xb1b1b1&color2=0xcfcfcf&hl=en_US&feature=player_embedded&fs=1"></param> <param name="allowFullScreen" value="true"></param> <param name="allowScriptAccess" value="always"></param> <embed src="http://www.youtube.com/v/DlIU5TgwEFg&color1=0xb1b1b1&color2=0xcfcfcf&hl=en_US&feature=player_embedded&fs=1" type="application/x-shockwave-flash" allowfullscreen="true" allowScriptAccess="always" width="640" height="385"></embed> </object> is this because iPad has got a native youtube app which has special support for youtube embeds, or is this something that is handled by the script that's get executed by the youtube embed code, which might check for the user agent, and then load the HTML5 video player with a source pointing to the h.264 encoded version of the video (is something of this sort possible)?

  Read the article

• Handling XMLHttpRequest to call external application

  - by Ian

  I need a simple way to use XMLHttpRequest as a way for a web client to access applications in an embedded device. I'm getting confused trying to figure out how to make something thin and light that handles the XMLHttpRequests coming to the web server and can translate those to application calls. The situation: The web client using Ajax (ExtJS specifically) needs to send and receive asynchronously to an existing embedded application. This isn't just to have a thick client/thin server, the client needs to run background checking on the application status. The application can expose a socket interface, with a known set of commands, events, and configuration values. Configuration could probably be transmitted as XML since it comes from a SQLite database. In between the client and app is a lighttpd web server running something that somehow handles the translation. This something is the problem. What I think I want: Lighttpd can use FastCGI to route all XMLHttpRequest to an external process. This process will understand HTML/XML, and translate between that and the application's language. It will have custom logic to simulate pushing notifications to the client (receive XMLHttpRequest, don't respond until the next notification is available). C/C++. I'd really like to avoid installing Java/PHP/Perl on an embedded device. So I'll need more low level understanding. How do I do this? Are there good C++ libraries for interpreting the CGI headers and HTML so that I don't have to do any syntax processing, I can just deal with the request/response contents? Are there any good references to exactly what goes on, server side, when handling the XMLHttpRequest and CGI interfaces? Is there any package that does most of this job already, or will I have to build the non-HTTP/CGI stuff from scratch? Thanks for any help! I am really having trouble learning about the server side of these technologies.

  Read the article

• How to use sessions in PDO?

  - by Byakugan

  I am still redoing and getting rid of old mysql_* commands in my code. I tried to transfer my session login form old code and this is what I got so far: public function login($user, $password) { if (!empty($user) && !empty($password)) { $password = $web->doHash($user, $password); // in this function is (return sha1(strtoupper($user).':'.strtoupper($password)) $stmt = $db_login->prepare("SELECT * FROM account WHERE username=:user AND pass_hash=:password"); $stmt->bindValue(':user', $user, PDO::PARAM_STR); $stmt->bindValue(':password', $password, PDO::PARAM_STR); $stmt->execute(); $rows = $stmt->rowCount(); if ($rows > 0) { $results_login = $stmt->fetch(PDO::FETCH_ASSOC); $_SESSION['user_name'] = $results_login['username']; $_SESSION['user_id'] = $results_login['id']; return true; } else { return false; } } else { return false; } } After that I am using checks if user logged on site: public function isLogged() { return (!empty($_SESSION['user_id']) && !empty($_SESSION['user_name'])); } But it seems - this function returns always empty because $_SESSION does not exists in PDO? And of course logout is used in this form on my sites: public function logout() { unset($_SESSION['user_id']); unset($_SESSION['user_name']); } But I think PDO has different way of handling session? I did not find any so what is it can i somehow add $_SESSION in PDO withou changing code much? I am using variables $_SESSION['user_name'] and $_SESSION['user_id'] in all over my web project. Summary: 1) How to use sessions in PDO correctly? 2) What is difference between using $stmt->fetch(PDO::FETCH_ASSOC); and $stmt->fetchAll(); Thank you.

  Read the article

• Help, my CentOS servers keep going down , No route to host after a random uptime [closed]

  - by user249071

  Hello , I have a couple of Centos linux servers, that have a very simple task, they run nginx + fastcgi for php , and some NFS mounts between them, readonly They have some RPC commands to start some downloading processes with wget, nothing fancy , from a main server, but their behavior is very unstable, they simply go down, we tried to monitor ram , processor usage, even network connections, they don't load up so much, max network connections up to... 250 max, 15% processor usage and memory , well, doesn't even fill up, 2.5GB from 8GB max , I have no ideea why can a linux server go down like that, they aren't even public servers, no domain names installed no public serving, for sites. The only thing that I've discovered was that if i didn't restart the network service every couple of hours or so... the servers were becoming very slow, starting apps very slow, but not repoting a high usage of resources...Maybe Centos doesn't free the timeout connections, or something like that...It's based on Red Hat right? I'm not a linux expert , but I'm sure that there are a few guys out there that can easily have an answer to this , or even have some leads to what i can do ... I haven't installed snort, or other things to view if we have some DOS attacks, still the scheduled script that restarts the network each hour should put the system back online, and it doesn't.... Thank you in advance

  Read the article

• C#.NET DataGridView - update database

  - by Geo Ego

  I know this is a basic function of the DataGridView, but for some reason, I just can't get it to work. I just want the DataGridView on my Windows form to submit any changes made to it to the database when the user clicks the "Save" button. On form load, I populate the DataGridView and that's working fine. In my save function, I basically have the following (I've trimmed out some of the code around it to get to the point): using (SqlDataAdapter ruleTableDA = new SqlDataAdapter("SELECT rule.fldFluteType AS [Flute], rule.fldKnife AS [Knife], rule.fldScore AS [Score], rule.fldLowKnife AS [Low Knife], rule.fldMatrixScore AS [Matrix Score], rule.fldMatrix AS [Matrix] FROM dbo.tblRuleTypes rule WHERE rule.fldMachine_ID = '1003'", con)) { SqlCommandBuilder commandBuilder = new SqlCommandBuilder(ruleTableDA); DataTable dt = new DataTable(); dt = RuleTable.DataSource as DataTable; ruleTableDA.Fill(dt); ruleTableDA.Update(dt); } Okay, so I edited the code to do the following: build the commands, create a DataTable based on the DataGridView (RuleTable), fill the DataAdapter with the DataTable, and update the database. Now ruleTableDA.Update(dt) is throwing the exception "Concurrency violation: the UpdateCommand affected 0 of the expected 1 records." Thanks very much!

  Read the article

• protecting grails melody with grails filter

  - by batmannavneet

  I have an application where I am using spring security along with grails melody. I am planning to run grails melody in production environment, but don't want visitors to have access to it. How should I achieve that ? I tried creating a filter in grails (just showing the sample of what I am trying, not the actual code)- def filters = { allURIs(uri:'/**') { before = { //... if(request.forwardURI.indexOf("admin") != -1 || request.forwardURI.indexOf("monitoring") != -1) { response.sendError 404 return false } } } } But this doesnt work as the request for "monitoring" doesnt hit this filter. I dont even want the user to know that such a URL exists, so I want to check in the filter that if "monitoring" is the URL, I show the 404 error page. Thats also the reason why I dont want to protect this URL with spring security as it will show "access denied" page. Basically I want the URL to exist but they should be invisible to users. I want the access to be open to only certain IP addresses for these special URLs. On another note, Is it possible to write a grails filter that "acts" before the spring security filter is hit ? I want to be able to do some filtering before I forward requests to spring security. Writing a grails filter like above doesnt help. Spring security filter gets hit first if I access a protected resource and this filter doesn't get called. Thanks

  Read the article

• Invalid argument in sendfile() with two regular files

  - by Daniel Hershcovich

  I'm trying to test the sendfile() system call under Linux 2.6.32 to zero-copy data between two regular files. As far as I understand, it should work: ever since 2.6.22, sendfile() has been implemented using splice(), and both the input file and the output file can be either regular files or sockets. The following is the content of sendfile_test.c: #include <sys/sendfile.h> #include <fcntl.h> #include <stdio.h> int main(int argc, char **argv) { int result; int in_file; int out_file; in_file = open(argv[1], O_RDONLY); out_file = open(argv[2], O_WRONLY | O_CREAT | O_TRUNC, 0644); result = sendfile(out_file, in_file, NULL, 1); if (result == -1) perror("sendfile"); close(in_file); close(out_file); return 0; } And when I'm running the following commands: $ gcc sendfile_test.c $ ./a.out infile The output is sendfile: Bad file descriptor Which means that the system call resulted in errno = -EINVAL, I think. What am I doing wrong?

  Read the article

• How do I forward `<Ctrl>-<Tab>` in Konsole?

  - by M. Tibbits

  I want to use intelligent tabbing in Emacs in C++ mode, but I also want to be able to insert a tab character when necessary. From other posts, I gather that the easiest way is to bind <Ctrl>-<Tab> to indent. However, it appears that Konsole in KUbuntu won't forward the <Ctrl>? My current .emacs file contains: (defun my-c-mode-common-hook () (setq c++-tab-always-indent t) (setq tab-width 4) (setq indent-tabs-mode t) ) (add-hook 'c-mode-common-hook 'my-c-mode-common-hook) (global-set-key [C-tab] 'self-insert-command) So I believe that this will bind <Ctrl>-<Tab> to inserting a tab character. However, when I run: <Ctrl>-h k <Ctrl>-<Tab> Emacs only reports that I pressed the tab key. Is there some option to Konsole (which I have searched through to no avail) or global preferences in KUbuntu that I need to set so that the <Ctrl>- is also forwarded? (It certainly forwards all of the other <Ctrl>-blah commands.)

  Read the article

< Previous Page | 325 326 327 328 329 330 331 332 333 334 335 336  | Next Page >