Search Results

Search found 1702 results on 69 pages for 'guy asinovsky'.

Page 33/69 | < Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >

• Connecting to iSCSI Target

  - by Joost Verdaasdonk

  I've installed Microsoft iSCSI Software Target 3.3 on a server 2008 R2 machine and created a new iSCSI Target. In the target I created a new Virtual Disk. From another server I started iSCSI Initiator and in Targets | Target I typed the IP of the Target. (Also tried DNS name.) But when I click Refresh I never see the target. Through googling I found this Youtube tut from a French guy doing pretty much what I did (only difference is I'm in a domain). I first though that maybe Port 3260 was closed but its not I can telnet to it. Also disabled all firewalls to see if that was blocking anything... No luck so far. Does anybody know of possible reasons why I can't connect to the iSCSI Target? If I can provide more info please let me know what's needed? Extra info: I've used this tut to set things up.

  Read the article

• Changing Windows 'hosts' file in guest OS under Parallels Desktop 6 on Mac [migrated]

  - by ling

  I am running Win7 in a Parallels Desktop 6 on Mac. On the mac, I use /etc/hosts : 127.0.0.1 mysite and it works fine : I can type mysite in the url and the website will display. What I want to do is be able to reproduce the same on Win7 with IE8 for example. Another guy did it successfully here but I can't : Parallels: How to see a Mac-hosted website from Windows? On Mac : ifconfig -a vnic0 10.211.55.2 on Win7 I tried this C:\Windows\System32\drivers\etc\hosts 10.211.55.2 mysite What am I missing ?

  Read the article

• How to use radiusclient-ng?

  - by Muhammad Gelbana

  A guy on my team compiled the radiusclient and radlogin executable found on that page. But installing it is getting more and more problematic and I can't seem to get anywhere ! I received from him: radclient libfreeradius-client.so.2 servers radiusclient.conf dictionary.dat radlogin What I'm trying to do is to install this client on a linux box and the: Access that box remotely using ssh. Then issue a authentication\accounting requests to another remote RADIUS server. But nothing seems intuitive about this and I have very little experience with linux and RADIUS protocols ! Has anyone successfully installed that client ? Thank you.

  Read the article

• Monitor has yellow tint when used with the graphics card

  - by artknish

  I have an nVIDIA graphics card when used produces an yellow tint on my monitor's display. I tried with another monitor and it had the same issue. I then switched back to my motherboard's inbuilt graphics output (not sure what the technical term is), and the display seems fine, except I can't get the optimal resolution of 1440x900 to work. So is my graphics card's life over? Or can I get it repaired? Any self remedies without calling a hardware guy? Should I try with a DVI cable? I've been using the VGA cable from my graphics card to the monitor so far. Thanks for your suggestions!

  Read the article

• One way sync with either Dropbox or Google drive on linux and windows

  - by sup

  I could not google this one. I would like to use Dropbox or Google drive only as backup, so I would like to ensure I only upload to those services and never download (unless done manually via the web interface). There would be several of us uploading stuff to one account, so we would need to ensure we don't accidentaly delete something on another guy's machine by doing some changes on our local machine. Is there a simple way to do this automatically - i.e. by running a daemon that will upload eveyuthing in a given folder but never download anything? I am on linux, so that complicates things a bit, but I am also interested in windows solutions.

  Read the article

• Client PC not booting when certain TFT plugged in - TFT or graphics card failure?

  - by Chake

  here comes something quite strange: On a client machine (DELL Vostro 420) we experienced problems when booting: when turning on the machine beeps normal but doesn't display anything and doesn't boot. After some testing I found out, that this only happens if one (of the two) monitors (Iiyama ProLite E2472HDD) is plugged in while booting. If the other monitor (TFT 2) is plugged in everything is fine. Here a small illustration, TFT 1 is the bad guy: TFT 1 | TFT 2 | failure x | x | x x | | x | x | After BIOS-Phase I can safely plug in TFT 1 and everything works just fine. The question is, what can be done to avoide this behavior: Change monitor? (Iiyama ProLite E2472HDD) Change graphics card? (GeForce 9800 GT) Other suggestions?

  Read the article

• SQL 2008. I have user in a db which has no login on the server. How is it possible?

  - by Boppity Bop

  I am talking about windows authentication. I dont have access to the server adming rights but a dbadmin sent me screenshot where my user is not in the logins of the server. and also there is only one windows group called admin - databases which I am 100% sure my guy cannot be part of it. BUT... his username is in users of my db... How come user can appear in a db not having login on the server? P.S. in the logs it prints: Login failed for user 'xxxx'. Reason: Token-based server access validation failed with an infrastructure error. Check for previous errors

  Read the article

• What is the main reason for ADSL modem/routers dying?

  - by ldigas

  The other day my home ADSL modem/router (dwg 684t in this case) died. A guy from the telecom company came to my place and brought another one, but he also left this one. Now, I'm interested - it didn't fall, it wasn't electrocuted - but it just doesn't work. What could be the problem? Can it be fixed? Is it worth it (in which case I would have two which is always nice)? I'm not looking for a definite opinion, just your personal advice ... (although in the end I think I'm going to archive it in the "cylinder register") What are the usual problems that occur with them? In this case, I can connect to the router, I can see its settings, I just can't connect to the Internet. With the new one everything works. Weird.

  Read the article

• Migrating Magento Concern

  - by Pankaj Upadhyay

  We have a Magento 1.5.0.1 store running at a hosting provider. Now, we need to migrate the same from that server to a new hosting provider. I had talk with a technical guy from the new hosting provider who told me to do following things. Go into the cPanel Backup Wizard . Make a FULL BACKUP and download the zip file Then upload that zip file on their server in my root folder. Then tell them and they will do the restore. My Concern :- Will everything work as expected. What about the connectionstrings and database and all. Will database be automatically created and work the same. Also, somewhere I read that ver 1.5.0.1 used older type of database which might not work on new MySQLs. Can this too have any impact. Should i proceed in the same manner or I need to take care of some additional things to ensure smooth running.

  Read the article

• So confused by these CPU Specs can someone please help me out? THanks!

  - by Kevin

  Intel® Core™ i7-640M (2.8~3.46GHz, 35W) w/4MB Cache - 2 Cores, 4 Threads - 2.5 GT/s SO i'm buying a new laptop, which i have not done in 6 years. So i am not familiar with any of these cpu specs. It was the highest option for intel for this laptop. So i am assuming it is somewhat fast. But i'd like to learn what these specs mean. Any help would be greatly appreciated. i am not really a computer guy but would love to learn about what I am buying. Thanks!

  Read the article

• ubuntu server refusing connections via port forwarding

  - by Matt

  Getting some really weird behavior from our Ubuntu server... it's behind a Verizon router firewall with port forwarding (port 8080 to port 80 on the server), and we've been having issues accessing it via this external IP. From within the network, it appears to respond normally (I can access it via web browser and SSH), but refuses connections through port forwarding (using our static external IP). The strangest thing is that it actually responds to external port-forwarded connections right after being restarted, but quickly lapses back into this pattern of refusing external connections. I'm a bit of a server newbie (I'm actually a programmer in a small startup that just lost their server ops guy, urgh) so this is all trial by fire for me. Does anyone have any advice on what could be going wrong here? Any help would be appreciated, thanks.

  Read the article

• Can a processor upgrade cause BSOD?

  - by Daniel

  I Had the following hardware setup: Phenom II X4 945 Asus M4A97 4GB DDR2 OCZ Radeon HD5850 OCZ Agility 2 120 GB Windows 7 x64 Pro Fully updated (latest drivers and windows update patches) Then I bought an used Phenom II X6 1090T and installed it without formatting. Since that my computer started BSODing almost every time I'm playing any game and with different error messages, like: page fault in non-paged area bad pool header the video memory manager found a problem error in dxgmm1.sys(or something like that) And when it doesn't BSOD the game simply crashes. I have tried: Updating BIOS Reseting BIOS to defaults Reinstalling Video Drivers Installing the latest DirectX All that's left is to do a full format and I don't want to do that since it's going to be a lot of work to fine tune windows to my preferences again. So is my "new" processor defective or do I really need to format the computer? Update: I use a (properly installed) custom cooler from Coolermaster and both the BIOS and the Open Hardware Monitor(Application) attest the CPU is not overheating, so I guess the CPU its defective and since I bought it from a guy over the Internet I'm probably screwed

  Read the article

• Making an SSD drive the primary boot/system drive

  - by David Ebbo

  [Not much of a hardware guy, so please excuse my ignorance :)] I just ordered an HP Pavilion Elite HPE-450t (desktop), which came with Win7 installed on the hard drive, using two partitions (C: and D:). Separately, I bought a 128GB SSD that I intend to use as my system drive. I got it in there and connected it, and right now, it's the J: drive (which was the first letter available in disk manager). My goal is for the SSD to get a clean OS install be the C: drive, and to clean out the other hard drive and make it D: (for misc data storage) Question #1: the motherboard has two SATA plugs. Does it matter which one I use for which drive? Question #2: what's the right way to install Win7 on the SSD in a way that it ends up being the C: drive? Do I need to switch some things around in the current Win7 that came with it, are can I do all that while installing Win7 on the SSD?

  Read the article

• Someone try to hack my site, want to understand the log

  - by garconcn

  I have a wordpress site hosted on CentOS 6. After see the following access log, I checked the server, it seems ok. Can anyone explain what does this guy trying to do? Did they get what they want? I have disabled allow_url_include, and restricted open_basedir to web dir and tmp(/etc is not in the path). 190.26.208.130 - - [05/Sep/2012:21:24:42 -0700] "POST http://my_ip/?-d%20allow_url_include%3DOn+-d%20auto_prepend_file%3D../../../../../../../../../../../../etc/passwd%00%20-n/?-d%20allow_url_include%3DOn+-d%20auto_prepend_file%3D../../../../../../../../../../../../etc/passwd%00%20-n HTTP/1.1" 200 32656 "-" "Mozilla/5.0"

  Read the article

• Can a network interface be configured to have a default gateway for UDP packets?

  - by Vaibhav

  It is quite possible that my question may not make a lot of sense. I apologize, but I am not a networking guy, and that's my excuse. To elaborate, WikiPedia defines "Default Gateway" as a node on a "TCP/IP" network. And the way it works is that if a network interface is sending a packet to an IP address not present on its subnet, it sends it out to the default gateway (which then knows what to do with that packet). Is this true if a UDP packet (datagram) is involved? I mean, if my network interface is sending a UDP packet to an IP address that is not present on its subnet, would it automatically send it to the Default Gateway as well?

  Read the article

• How do I get my 192.168.* Linux server accessible via http://hostname/?

  - by rfrankel

  (Sorry if this question isn't worded well and/or is duplicate. I'm not a networking guy and I'm probably not using the right terms...this also makes it hard to see if this has already been answered.) I'm running a CentOS server in VirtualBox, Windows host, and I can see access Apache-hosted pages at http://192.168.1.109/ from machines on my LAN. But what I'd like is for people to be able to type http://hostname/ ...both because it's easier and primarily because I'm not sure that local IP is static. I'm not really sure how to proceed - could someone point me in the right direction? Thanks.

  Read the article

• Replace Certificate using Plesk 11

  - by Lambda Dusk

  I am not an admin, but a programmer. But how it is, if you're the only guy who knows about computers, everyone shoves those tasks to you. A certificate of a domain recently expired. The domains are managed using Plesk 11, on a Linux system, Apache2.2. I was given a new certificate from the host, and it is one single .pem file. However, Plesk asks me for a .crt file, a private key and some CA file. I have neither, only this single .pem file the host claims to be the certificate. Since I myself never did anything with SSL certificates, I would really appreciate if anyone can tell me what to do with this file and how to properly add a new one so the old one can be removed.

  Read the article

• Resetting default Input Method in Mac OS 10.6

  - by Tim Visher

  I'm a Dvorak guy. I recently installed a new machine at the inlaws who are not Dvorak people. I stupidly selected Dvorak as my Input Method of choice while installing OS X. Now, all of the users I created default to Dvorak and need to go through the manual process of removing Dvorak as their Input Method of choice and instead choosing U.S. I have no idea how far reaching the implications might be. Could be that any time another user is added they will default to Dvorak. Right now, I'd like to set the default back to U.S. How can I do that? Behaviors I'm looking for include that when the Input Menu is not shown at the Login Screen, U.S. is the keyboard layout. Any future users created should default to U.S. with no Input Menu in the menu bar. Any users created already should have their default layout be U.S. Thanks in advance!

  Read the article

• Ubuntu 10.4 No internet

  - by Keeper780

  I have Ubuntu 10.4 dual booted with Windows Vista on a work Lenovo R61 laptop. The home and work wireless connection were working fine. I lost all internet connection at work. The IT guy clearly knew nothing about Linux. Since he 'fixed' it get nothing, no wlan signal the Network manager icon was gone, no internet. I still have the live disc and if I run from the live disc the connections are there and everything works perfectly. How do I restore the internet easily on my laptop. I have been using Linux for 3 Years but I am still a bit of a newbie, this is the first major problem I've had in three years. It's driving me nuts. Thanks

  Read the article

• Unreadable sectors reported by smartd, is it serious?

  - by stribika

  I have a RAID 5 array of 4 disks. In the last 2 days I began to see these messages in the log: Jun 13 23:01:05 localhost smartd[4537]: Device: /dev/sda [SAT], 1 Currently unreadable (pending) sectors Jun 13 23:01:05 localhost smartd[4537]: Device: /dev/sdb [SAT], 2 Currently unreadable (pending) sectors If I have 2 faulty disks then the array should not show all disks OK: md0 : active raid1 sdd1[3] sdb1[1] sdc1[2] sda1[0] 64128 blocks [4/4] [UUUU] Strangely there are no other problems just the log messages. I am worried because sda is new and I previously had problems with sdb. (Completely died but the guy who sold it to me fixed it somehow.) Am I in danger of losing data? What should I do now?

  Read the article

• Running Debian as a Virtual Machine Host

  - by Tone

  I have a need to run a linux server to host subversion, bugzilla over Apache and also act as a file and print server. I also have a need to host Windows Server 2008 virtual machines for development purposes (I'm a .NET guy). The machine I have is a dual core AMD 2.5 Ghz w/2GB RAM. So here are my questions: 1) Should I run Debian (or some other distro) as the base AND create a Debian VM to host subversion, bugzilla and be my file/print server? or is it ok to use Debian as both my VM host and for those other reasons? 2) VMWare has a free server edition, Virtual Box also is another free option. Which one of these is better suited for what I need to do? Are there any other free (or inexpensive) alternatives out there? 3) Will I need a GUI with Debian in order to manage my VMs? 4) Can I run VMs without a GUI to conserve system resources?

  Read the article

• BSODs after Windows 8.1 Upgrade

  - by Techrocket9

  I just upgraded my system to Windows 8.1, and I have been getting BSODs that I did not get before the 8.1 upgrade. Though I cannot conclude that running the Android Emulator with Intel's HAXM is the cause, both crashes have occurred while the emulator was running. I get CRITICAL_STRUCTURE_CORRUPTION, the same error as this guy, except I don't have the hardware/software that he has that caused his problem. Minidumps here. Output of verifier.exe /all and then a reboot and then verifier /query: http://sdrv.ms/17CPVu9 Edit: According to software.intel.com/en-us/forums/topic/475129 (can't link due to lack of rep) it is being caused by HAXM. Will close question when I find a solution.

  Read the article

• Error code 2503 - Cannot install software on Windows 7 (64Bit)

  - by SixfootJames

  A short while ago, I had my hard drive die on me and at the same time my 1Tb backup drive! I took it back to the guy I bought the PC from and although the backup drive could not be recovered, he managed to get my machine working again by making a minor change in the BIOS which then got it out of that continuous loop it found itself in after multiple BSOD episodes. Everything seems to be working fine but yesterday when I tried to save something from Google Chrome, I got and insufficient permission problem and when I try to install software, I get an error of 2503. I have already followed the suggestions here but none of this worked for me. Any suggestions would be appreciated. EDIT: This started happening after I tried running a number of tests to get the machine working, including a previous restore point.

  Read the article

• Networking conflict - What is the most common default computer name for Windows?

  - by John

  I recently had to change the name of my computer to log onto a public wi-fi spot, because a computer with my name was already logged on. (I asked a guy there what to do after it said there was already a computer named "(omitted)" logged on.) I've never been at a wifi spot you had to log into before. I didn't even notice what the computer's name was before. My question is what are the most common default computer names. I'm curious. How often does this sort of problem happen? (For some reason my previous post was closed as off topic - so now I included the reason I'm asking. If it's still considered off topic (networking conflicts) I'll take it elsewhere, but the other forums I know of (ehow.com, answers.yahoo.com) are full of people that couldn't begin to answer a question like this.) Thanks.

  Read the article

• Networking conflict - What is the most common default computer name for Windows?

  - by John

  I recently had to change the name of my computer to log onto a public wi-fi spot, because a computer with my name was already logged on. (I asked a guy there what to do after it said there was already a computer named "(omitted)" logged on.) I've never been at a wifi spot you had to log into before. I didn't even notice what the computer's name was before. My question is what are the most common default computer names. I'm curious. How often does this sort of problem happen? (For some reason my previous post was closed as off topic - so now I included the reason I'm asking. If it's still considered off topic (networking conflicts) I'll take it elsewhere, but the other forums I know of (ehow.com, answers.yahoo.com) are full of people that couldn't begin to answer a question like this.) Thanks.

  Read the article

< Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >