Search Results

Search found 2489 results on 100 pages for 'hp laserjet'.

Page 33/100 | < Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >

  • NFS issue brings down entire vSphere ESX estate

    - by growse
    I experienced an odd issue this morning where an NFS issue appeared to have taken down the majority of my VMs hosted on a small vSphere 5.0 estate. The infrastructure itself is 4x IBM HS21 blades running around 20 VMs. The storage is provided by a single HP X1600 array with attached D2700 chassis running Solaris 11. There's a couple of storage pools on this which are exposed over NFS for the storage of the VM files, and some iSCSI LUNs for things like MSCS shared disks. Normally, this is pretty stable, but I appreciate the lack of resiliancy in having a single X1600 doing all the storage. This morning, in the logs of each ESX host, at around 0521 GMT I saw a lot of entries like this: 2011-11-30T05:21:54.161Z cpu2:2050)NFSLock: 608: Stop accessing fd 0x41000a4cf9a8 3 2011-11-30T05:21:54.161Z cpu2:2050)NFSLock: 608: Stop accessing fd 0x41000a4dc9e8 3 2011-11-30T05:21:54.161Z cpu2:2050)NFSLock: 608: Stop accessing fd 0x41000a4d3fa8 3 2011-11-30T05:21:54.161Z cpu2:2050)NFSLock: 608: Stop accessing fd 0x41000a4de0a8 3 [....] 2011-11-30T06:16:07.042Z cpu0:2058)WARNING: NFS: 283: Lost connection to the server 10.13.111.197 mount point /sastank/VMStorage, mounted as f0342e1c-19be66b5-0000-000000000000 ("SAStank") 2011-11-30T06:17:01.459Z cpu2:4011)NFS: 292: Restored connection to the server 10.13.111.197 mount point /sastank/VMStorage, mounted as f0342e1c-19be66b5-0000-000000000000 ("SAStank") 2011-11-30T06:25:17.887Z cpu3:2051)NFSLock: 608: Stop accessing fd 0x41000a4c2b28 3 2011-11-30T06:27:16.063Z cpu3:4011)NFSLock: 568: Start accessing fd 0x41000a4d8928 again 2011-11-30T06:35:30.827Z cpu1:2058)WARNING: NFS: 283: Lost connection to the server 10.13.111.197 mount point /tank/ISO, mounted as 5acdbb3e-410e56e3-0000-000000000000 ("ISO (1)") 2011-11-30T06:36:37.953Z cpu6:2054)NFS: 292: Restored connection to the server 10.13.111.197 mount point /tank/ISO, mounted as 5acdbb3e-410e56e3-0000-000000000000 ("ISO (1)") 2011-11-30T06:40:08.242Z cpu6:2054)NFSLock: 608: Stop accessing fd 0x41000a4c3e68 3 2011-11-30T06:40:34.647Z cpu3:2051)NFSLock: 568: Start accessing fd 0x41000a4d8928 again 2011-11-30T06:44:42.663Z cpu1:2058)WARNING: NFS: 283: Lost connection to the server 10.13.111.197 mount point /sastank/VMStorage, mounted as f0342e1c-19be66b5-0000-000000000000 ("SAStank") 2011-11-30T06:44:53.973Z cpu0:4011)NFS: 292: Restored connection to the server 10.13.111.197 mount point /sastank/VMStorage, mounted as f0342e1c-19be66b5-0000-000000000000 ("SAStank") 2011-11-30T06:51:28.296Z cpu5:2058)NFSLock: 608: Stop accessing fd 0x41000ae3c528 3 2011-11-30T06:51:44.024Z cpu4:2052)NFSLock: 568: Start accessing fd 0x41000ae3b8e8 again 2011-11-30T06:56:30.758Z cpu4:2058)WARNING: NFS: 283: Lost connection to the server 10.13.111.197 mount point /sastank/VMStorage, mounted as f0342e1c-19be66b5-0000-000000000000 ("SAStank") 2011-11-30T06:56:53.389Z cpu7:2055)NFS: 292: Restored connection to the server 10.13.111.197 mount point /sastank/VMStorage, mounted as f0342e1c-19be66b5-0000-000000000000 ("SAStank") 2011-11-30T07:01:50.350Z cpu6:2054)ScsiDeviceIO: 2316: Cmd(0x41240072bc80) 0x12, CmdSN 0x9803 to dev "naa.600508e000000000505c16815a36c50d" failed H:0x0 D:0x2 P:0x0 Valid sense data: 0x5 0x24 0x0. 2011-11-30T07:03:48.449Z cpu3:2051)NFSLock: 608: Stop accessing fd 0x41000ae46b68 3 2011-11-30T07:03:57.318Z cpu4:4009)NFSLock: 568: Start accessing fd 0x41000ae48228 again (I've put a complete dump from one of the hosts on pastebin: http://pastebin.com/Vn60wgTt) When I got in the office at 9am, I saw various failures and alarms and troubleshooted the issue. It turned out that pretty much all of the VMs were inaccessible, and that the ESX hosts either were describing each VM as 'powered off', 'powered on', or 'unavailable'. The VMs described as 'powered on' where not in any way reachable or responding to pings, so this may be lies. There's absolutely no indication on the X1600 that anything was awry, and nothing on the switches to indicate any loss of connectivity. I only managed to resolve the issue by rebooting the ESX hosts in turn. I have a number of questions: What the hell happened? If this was a temporary NFS failure, why did it put the ESX hosts into a state from which a reboot was the only recovery? In the future, when the NFS server goes a little off-piste, what would be the best approach to add some resilience? I've been looking at budgeting for next year and potentially have budget to purchase another X1600/D2700/disks, would an identical mirrored disk setup help to mitigate these sorts of failures automatically? Edit (Added requested details) To expand with some details as requested: The X1600 has 12x 1TB disks lumped together in mirrored pairs as tank, and the D2700 (connected with a mini SAS cable) has 12x 300GB 10k SAS disks lumped together in mirrored pairs as sastank zpool status pool: rpool state: ONLINE scan: none requested config: NAME STATE READ WRITE CKSUM rpool ONLINE 0 0 0 c7t0d0s0 ONLINE 0 0 0 errors: No known data errors pool: sastank state: ONLINE scan: scrub repaired 0 in 74h21m with 0 errors on Wed Nov 30 02:51:58 2011 config: NAME STATE READ WRITE CKSUM sastank ONLINE 0 0 0 mirror-0 ONLINE 0 0 0 c7t14d0 ONLINE 0 0 0 c7t15d0 ONLINE 0 0 0 mirror-1 ONLINE 0 0 0 c7t16d0 ONLINE 0 0 0 c7t17d0 ONLINE 0 0 0 mirror-2 ONLINE 0 0 0 c7t18d0 ONLINE 0 0 0 c7t19d0 ONLINE 0 0 0 mirror-3 ONLINE 0 0 0 c7t20d0 ONLINE 0 0 0 c7t21d0 ONLINE 0 0 0 mirror-4 ONLINE 0 0 0 c7t22d0 ONLINE 0 0 0 c7t23d0 ONLINE 0 0 0 mirror-5 ONLINE 0 0 0 c7t24d0 ONLINE 0 0 0 c7t25d0 ONLINE 0 0 0 errors: No known data errors pool: tank state: ONLINE scan: scrub repaired 0 in 17h28m with 0 errors on Mon Nov 28 17:58:19 2011 config: NAME STATE READ WRITE CKSUM tank ONLINE 0 0 0 mirror-0 ONLINE 0 0 0 c7t1d0 ONLINE 0 0 0 c7t2d0 ONLINE 0 0 0 mirror-1 ONLINE 0 0 0 c7t3d0 ONLINE 0 0 0 c7t4d0 ONLINE 0 0 0 mirror-2 ONLINE 0 0 0 c7t5d0 ONLINE 0 0 0 c7t6d0 ONLINE 0 0 0 mirror-3 ONLINE 0 0 0 c7t8d0 ONLINE 0 0 0 c7t9d0 ONLINE 0 0 0 mirror-4 ONLINE 0 0 0 c7t10d0 ONLINE 0 0 0 c7t11d0 ONLINE 0 0 0 mirror-5 ONLINE 0 0 0 c7t12d0 ONLINE 0 0 0 c7t13d0 ONLINE 0 0 0 errors: No known data errors The filesystem exposed over NFS for the primary datastore is sastank/VMStorage zfs list NAME USED AVAIL REFER MOUNTPOINT rpool 45.1G 13.4G 92.5K /rpool rpool/ROOT 2.28G 13.4G 31K legacy rpool/ROOT/solaris 2.28G 13.4G 2.19G / rpool/dump 15.0G 13.4G 15.0G - rpool/export 11.9G 13.4G 32K /export rpool/export/home 11.9G 13.4G 32K /export/home rpool/export/home/andrew 11.9G 13.4G 11.9G /export/home/andrew rpool/swap 15.9G 29.2G 123M - sastank 1.08T 536G 33K /sastank sastank/VMStorage 1.01T 536G 1.01T /sastank/VMStorage sastank/comstar 71.7G 536G 31K /sastank/comstar sastank/comstar/sql_tempdb 6.31G 536G 6.31G - sastank/comstar/sql_tx_data 65.4G 536G 65.4G - tank 4.79T 578G 42K /tank tank/FTP 269G 578G 269G /tank/FTP tank/ISO 28.8G 578G 25.9G /tank/ISO tank/backupstage 2.64T 578G 2.49T /tank/backupstage tank/cifs 301G 578G 297G /tank/cifs tank/comstar 1.54T 578G 31K /tank/comstar tank/comstar/msdtc 1.07G 579G 32.8M - tank/comstar/quorum 577M 578G 47.9M - tank/comstar/sqldata 1.54T 886G 304G - tank/comstar/vsphere_lun 2.09G 580G 22.2M - tank/mcs-asset-repository 7.01M 578G 6.99M /tank/mcs-asset-repository tank/mscs-quorum 55K 578G 36K /tank/mscs-quorum tank/sccm 16.1G 578G 12.8G /tank/sccm As for the networking, all connections between the X1600, the Blades and the switch are either LACP or Etherchannel bonded 2x 1Gbit links. Switch is a single Cisco 3750. Storage traffic sits on its own VLAN segregated from VM machine traffic.

    Read the article

  • Wine 1.6.2-Trying to switch to 32-bit Wineprefix from 64-bit Wine (Trusty 14.04). Can anyone help me out?

    - by AlternateSteve90
    Hello fellow Ubuntu users, I'm having a little trouble with Wine 1.6.1 and I was wondering if someone could help me out. I recently downloaded some 32-bit games that I'd wanted to try(BeamNG Drive and Bugbear's Next Car Game demo) and I had run into some trouble trying to get either of these games to run. So I came across a couple pieces of advice on the 'Net, one here on the Ubuntu community site and the other at BeamNG's forums, on how to create a 32-bit wineprefix on a 64-bit setup. I managed to be able to create the wine32 folder, but now I'm having trouble making it my default Wine setup. Anybody have any idea how I can do that? I'll post the URLs for said advice, btw: http://www.beamng.com/threads/1788-Installing-DRIVE-under-Linux-via-Wine How do I create a 32-bit WINE prefix? Here's what I've tried so far in the Terminal: steven@steven-HP-Pavilion-17-Notebook-PC:~$ WINEPREFIX='/home/user/wine32' WINEARCH='win32' wine 'wineboot' wine: chdir to /home/user/wine32 : No such file or directory steven@steven-HP-Pavilion-17-Notebook-PC:~$ WINEPREFIX='/home/steven/wine32' WINEARCH='win32' wine 'wineboot' wine: created the configuration directory '/home/steven/wine32' fixme:storage:create_storagefile Storage share mode not implemented. err:mscoree:LoadLibraryShim error reading registry key for installroot err:mscoree:LoadLibraryShim error reading registry key for installroot err:mscoree:LoadLibraryShim error reading registry key for installroot err:mscoree:LoadLibraryShim error reading registry key for installroot fixme:storage:create_storagefile Storage share mode not implemented. fixme:iphlpapi:NotifyAddrChange (Handle 0x10ee890, overlapped 0x10ee89c): stub wine: configuration in '/home/steven/wine32' has been updated. steven@steven-HP-Pavilion-17-Notebook-PC:~$ WINEPREFIX=$HOME/.wine32 wine dxsetup.exe wine: created the configuration directory '/home/steven/.wine32' fixme:storage:create_storagefile Storage share mode not implemented. err:mscoree:LoadLibraryShim error reading registry key for installroot err:mscoree:LoadLibraryShim error reading registry key for installroot err:mscoree:LoadLibraryShim error reading registry key for installroot err:mscoree:LoadLibraryShim error reading registry key for installroot fixme:storage:create_storagefile Storage share mode not implemented. fixme:iphlpapi:NotifyAddrChange (Handle 0x103e2b8, overlapped 0x103e2d0): stub fixme:storage:create_storagefile Storage share mode not implemented. fixme:iphlpapi:NotifyAddrChange (Handle 0x10fe890, overlapped 0x10fe89c): stub wine: configuration in '/home/steven/.wine32' has been updated. wine: cannot find L"C:\windows\system32\dxsetup.exe" steven@steven-HP-Pavilion-17-Notebook-PC:~$ WINEARCH=win64 winecfgsteven@steven-HP-Pavilion-17-Notebook-PC:~$ WINEPREFIX='/home/steven/wine32' WINEARCH='win32' wine 'wineboot' steven@steven-HP-Pavilion-17-Notebook-PC:~$ WINEARCH=win32 winecfg wine: WINEARCH set to win32 but '/home/steven/.wine' is a 64-bit installation. steven@steven-HP-Pavilion-17-Notebook-PC:~$ WINEPREFIX='/home/steven/wine32' WINEARCH='win32' wine 'wineboot' steven@steven-HP-Pavilion-17-Notebook-PC:~$ WINEPREFIX='/home/user/wine32' WINEARCH='win32' wine 'wineboot' wine: chdir to /home/user/wine32 : No such file or directory steven@steven-HP-Pavilion-17-Notebook-PC:~$ WINEPREFIX='/home/steven/wine32' WINEARCH='win32' wine 'wineboot' steven@steven-HP-Pavilion-17-Notebook-PC:~$ WINEPREFIX=/home/steven/wine32 WINEARCH='win32' wine 'wineboot' steven@steven-HP-Pavilion-17-Notebook-PC:~$ WINEPREFIX=/home/steven/wine32 WINEARCH=win32 wine wineboot steven@steven-HP-Pavilion-17-Notebook-PC:~$ So, yeah. TBH, though, I'm far from an expert and perhaps I've been going about it all the wrong way. In the meantime, I'll try to keep looking for solutions on my own, but if anybody can help me solve this dilemma, especially if anyone happens to own any of these two games in particular, I'd appreciate it. :)

    Read the article

  • choosing the right RAID level

    - by student
    Recently, we bought a "HP-DL380 G6 Server" with 6 146GB (SCSI)HDD for our colleague course management application and website with 10000 daily visitors. we want to choose the best RAID level. how can we choose the right RAID level ? what is the best RAID level for our application ?

    Read the article

  • How can I further optimize this color difference function?

    - by aLfa
    I have made this function to calculate color differences in the CIE Lab colorspace, but it lacks speed. Since I'm not a Java expert, I wonder if any Java guru around has some tips that can improve the speed here. The code is based on the matlab function mentioned in the comment block. /** * Compute the CIEDE2000 color-difference between the sample color with * CIELab coordinates 'sample' and a standard color with CIELab coordinates * 'std' * * Based on the article: * "The CIEDE2000 Color-Difference Formula: Implementation Notes, * Supplementary Test Data, and Mathematical Observations,", G. Sharma, * W. Wu, E. N. Dalal, submitted to Color Research and Application, * January 2004. * available at http://www.ece.rochester.edu/~gsharma/ciede2000/ */ public static double deltaE2000(double[] lab1, double[] lab2) { double L1 = lab1[0]; double a1 = lab1[1]; double b1 = lab1[2]; double L2 = lab2[0]; double a2 = lab2[1]; double b2 = lab2[2]; // Cab = sqrt(a^2 + b^2) double Cab1 = Math.sqrt(a1 * a1 + b1 * b1); double Cab2 = Math.sqrt(a2 * a2 + b2 * b2); // CabAvg = (Cab1 + Cab2) / 2 double CabAvg = (Cab1 + Cab2) / 2; // G = 1 + (1 - sqrt((CabAvg^7) / (CabAvg^7 + 25^7))) / 2 double CabAvg7 = Math.pow(CabAvg, 7); double G = 1 + (1 - Math.sqrt(CabAvg7 / (CabAvg7 + 6103515625.0))) / 2; // ap = G * a double ap1 = G * a1; double ap2 = G * a2; // Cp = sqrt(ap^2 + b^2) double Cp1 = Math.sqrt(ap1 * ap1 + b1 * b1); double Cp2 = Math.sqrt(ap2 * ap2 + b2 * b2); // CpProd = (Cp1 * Cp2) double CpProd = Cp1 * Cp2; // hp1 = atan2(b1, ap1) double hp1 = Math.atan2(b1, ap1); // ensure hue is between 0 and 2pi if (hp1 < 0) { // hp1 = hp1 + 2pi hp1 += 6.283185307179586476925286766559; } // hp2 = atan2(b2, ap2) double hp2 = Math.atan2(b2, ap2); // ensure hue is between 0 and 2pi if (hp2 < 0) { // hp2 = hp2 + 2pi hp2 += 6.283185307179586476925286766559; } // dL = L2 - L1 double dL = L2 - L1; // dC = Cp2 - Cp1 double dC = Cp2 - Cp1; // computation of hue difference double dhp = 0.0; // set hue difference to zero if the product of chromas is zero if (CpProd != 0) { // dhp = hp2 - hp1 dhp = hp2 - hp1; if (dhp > Math.PI) { // dhp = dhp - 2pi dhp -= 6.283185307179586476925286766559; } else if (dhp < -Math.PI) { // dhp = dhp + 2pi dhp += 6.283185307179586476925286766559; } } // dH = 2 * sqrt(CpProd) * sin(dhp / 2) double dH = 2 * Math.sqrt(CpProd) * Math.sin(dhp / 2); // weighting functions // Lp = (L1 + L2) / 2 - 50 double Lp = (L1 + L2) / 2 - 50; // Cp = (Cp1 + Cp2) / 2 double Cp = (Cp1 + Cp2) / 2; // average hue computation // hp = (hp1 + hp2) / 2 double hp = (hp1 + hp2) / 2; // identify positions for which abs hue diff exceeds 180 degrees if (Math.abs(hp1 - hp2) > Math.PI) { // hp = hp - pi hp -= Math.PI; } // ensure hue is between 0 and 2pi if (hp < 0) { // hp = hp + 2pi hp += 6.283185307179586476925286766559; } // LpSqr = Lp^2 double LpSqr = Lp * Lp; // Sl = 1 + 0.015 * LpSqr / sqrt(20 + LpSqr) double Sl = 1 + 0.015 * LpSqr / Math.sqrt(20 + LpSqr); // Sc = 1 + 0.045 * Cp double Sc = 1 + 0.045 * Cp; // T = 1 - 0.17 * cos(hp - pi / 6) + // + 0.24 * cos(2 * hp) + // + 0.32 * cos(3 * hp + pi / 30) - // - 0.20 * cos(4 * hp - 63 * pi / 180) double hphp = hp + hp; double T = 1 - 0.17 * Math.cos(hp - 0.52359877559829887307710723054658) + 0.24 * Math.cos(hphp) + 0.32 * Math.cos(hphp + hp + 0.10471975511965977461542144610932) - 0.20 * Math.cos(hphp + hphp - 1.0995574287564276334619251841478); // Sh = 1 + 0.015 * Cp * T double Sh = 1 + 0.015 * Cp * T; // deltaThetaRad = (pi / 3) * e^-(36 / (5 * pi) * hp - 11)^2 double powerBase = hp - 4.799655442984406; double deltaThetaRad = 1.0471975511965977461542144610932 * Math.exp(-5.25249016001879 * powerBase * powerBase); // Rc = 2 * sqrt((Cp^7) / (Cp^7 + 25^7)) double Cp7 = Math.pow(Cp, 7); double Rc = 2 * Math.sqrt(Cp7 / (Cp7 + 6103515625.0)); // RT = -sin(delthetarad) * Rc double RT = -Math.sin(deltaThetaRad) * Rc; // de00 = sqrt((dL / Sl)^2 + (dC / Sc)^2 + (dH / Sh)^2 + RT * (dC / Sc) * (dH / Sh)) double dLSl = dL / Sl; double dCSc = dC / Sc; double dHSh = dH / Sh; return Math.sqrt(dLSl * dLSl + dCSc * dCSc + dHSh * dHSh + RT * dCSc * dHSh); }

    Read the article

  • Does this laptop have high enough specifications for gaming? [closed]

    - by Grant
    Here's the laptop It wouldn't be hardcore gaming, mostly things like the new Deus Ex game, Mirror's Edge, Portal 2, etc... I need to replace my current, broken, laptop and I thought this would be a good opportunity to get to play some of these games. My current laptop is really only lacking in its graphics card. (Intel series 4 chipset) If this laptop isn't good enough, I would really appreciate suggestions. I won't be able to get a desktop, otherwise I would, and I can't spend more than $1000 dollars on my new laptop.

    Read the article

  • ML 350 additional SATA RAID controller (mirror only)

    - by Nicholas
    I have a Proliant ML350 G8 with two SAS raid arrays currently set up - thereby maxing the default P420i raid controller. I need to set up a large video dump space in addition to this existing set-up (for non backed up, non-critical, temporary storage). I had planned to just add a 2TB SATA disk and plug it into the motherboard. However I it occurred to me the motherboard might have built-in mirror RAID support? Therefore I could use two SATA disks and have some semblance of redundancy. Is this possible? Or would I need to get a cheap raid card? Any recommendations?

    Read the article

  • DL380 G7: Not able to access ILO on DL380 via ssh from a client

    - by user117140
    I have problem where I can't access my ILO(ssh to ILO IP) thru client which is in different network.I am able to ping ILO IP thru this clinet but ssh access is not possible. Is it possible to have ssh to ILO IP from a client which is in different network? FYI, from the same client I can do ssh to server application IP but ssh to this server ILO IP is not possible. Kindly help? Some more info added: ILO IP address is 10.247.172.70 and its VLAN is different than Client VLAN. Client IP address is 10.247.167.80. ping to ILO IP from this client is possible but not ssh. I can do ssh to ILO IP if I try to do it from the server(hostname:node1) having ILO port or from the other node of this cluster itself,So ssh login is enabled. [root@node1 ~]$ssh -v 10.247.173.70 OpenSSH_4.3p2, OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: Connecting to 10.247.173.70 [10.247.173.70] port 22. [root@node1 ~]$ping 10.247.173.70 PING 10.247.173.70 (10.247.173.70) 56(84) bytes of data. 64 bytes from 10.247.173.70: icmp_seq=1 ttl=254 time=0.283 ms 64 bytes from 10.247.173.70: icmp_seq=2 ttl=254 time=0.344 ms 64 bytes from 10.247.173.70: icmp_seq=3 ttl=254 time=0.324 ms 64 bytes from 10.247.173.70: icmp_seq=4 ttl=254 time=0.367 ms

    Read the article

  • Problems mounting HPUX LVM+VXFS filesystem on Linux

    - by golimar
    I have a physical disk from a HPUX system that I need to access from a Debian Linux for ia64 system. From the hpux-lvm-tools project I have the tools to access the HPUX LVMs (Linux LVM has a different format) and I also have the freevxfs driver. I know beforehand that the disk has three partitions, and that the biggest one contains LVM volumes, and some of those are VxFS filesystems. I can see the partitions: # cat /proc/partitions major minor #blocks name 8 32 143374744 sdc 8 33 512000 sdc1 8 34 142452736 sdc2 8 35 409600 sdc3 It finds a VG in one of the disk partitions: # ./vgscan_hpux On /dev/sdc2 - vg1328874723 # ./pvdisplay_hpux /dev/sdc2 PV General Information ---------------------- VG Creation Time Fri Feb 10 12:52:03 2012 Physical Volume ID 1766760336 1328874723 Volume Group ID 1766760336 1328874723 Physical Volumes in VG 1766760336 1328874723 VG Actication Mode 0 - LOCAL PE Size 64 MBs Lvol sizes ---------- lvol1 - 8 Extents - 512 MBs lvol2 - 192 Extents - 12288 MBs lvol3 - 16 Extents - 1024 MBs ... lvol21 - 13 Extents - 832 MBs lvol22 - 224 Extents - 14336 MBs lvol23 - 16 Extents - 1024 MBs Then I activate that VG and some new devices appear in my system: # ./pvactivate_hpux /dev/sdc2 VG vg1328874723 Activated succesfully with 23 lvols. # # ll /dev/mapper/ total 0 crw------- 1 root root 10, 59 Nov 26 16:08 control lrwxrwxrwx 1 root root 7 Nov 26 16:38 vg1328874723-lvol1 -> ../dm-0 lrwxrwxrwx 1 root root 7 Nov 26 16:38 vg1328874723-lvol10 -> ../dm-9 ... lrwxrwxrwx 1 root root 7 Nov 26 16:38 vg1328874723-lvol8 -> ../dm-7 lrwxrwxrwx 1 root root 7 Nov 26 16:38 vg1328874723-lvol9 -> ../dm-8 But: # mount /dev/mapper/vg1328874723-lvol18 /mnt/tmp mount: you must specify the filesystem type # mount -t vxfs /dev/mapper/vg1328874723-lvol18 /mnt/tmp mount: wrong fs type, bad option, bad superblock on /dev/mapper/vg1328874723-lvol18, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so # lsmod |grep vxfs freevxfs 23905 0 I also tried to identify the raw data with the file command and it just says 'data': # file -s /dev/mapper/vg1328874723-lvol18 /dev/mapper/vg1328874723-lvol18: symbolic link to `../dm-17' # file -s /dev/dm-17 /dev/dm-17: data # Any clues?

    Read the article

  • RAID5 on SmartArray P410i online resize

    - by datacompboy
    I have P410i+256M Cache without battery backup. My RAID5 was build over 3*136GB disks, now all disks were replaced to a 3*300GB array. How can I extend it to use the whole space? HPacucli doesn't allows that, I think this might be because no battery is present. I have a redundant power supply. All data is mirrored over DRBD to a secondary server, so I can try to resize with a chance of loss of data in case of power failure, but I prefer to have an online resize.

    Read the article

  • Laptop harddisk produces clicking sound

    - by Alfred James
    This happens when I am booting up into windows, shutdown or things in which I access the harddrive excessively. It doesn't happen all the time. I have checked it with "Crystal disk Info" and it displays no problem, and shows HDD to perfectly fine. Should I be worried about my HDD? I have Hitachi HDD in laptop. Some times my harddrive temps reach upto 43C while watching movies or playing games. What are the normal temps, which are safe for HDD to operate and increase the lifetime of HDD. Thanks

    Read the article

  • Parity Initialization after putting in two new disks

    - by lbanz
    All my firmware is up to date on the server and the controllers. Storage crashed over the weekend. I rebooted it and it detected that I put in two new disks last week (I did check that both disk completed the rebuilding process last week). After it booted into the OS I see that it gave me an information message. After 18 hours it is at 54% so it is looking healthy. But I need to replace 5 more disk in the msa. Should I wait for this message to finish before replacing more disks? 785 Background parity initialization is currently queued or in progress on Logical Drive 1 (15.0 TB, RAID 5). If background parity initialization is queued, it will start when I/O is performed on the drive. When background parity initialization completes, the performance of the logical drive will improve.

    Read the article

  • Issue with Capslock key on Laptop

    - by Mr New
    For some reason my laptop has a mind of its own and the Caps Lock tends to come on whenever it feels like it. I thought it was an software issue from that reasoning, but I later cleared the OS and then reinstalled it hoping to fix the problem, but it didn't. Not only does it do that it also comes on and off whenever the letters A, S, and left shift key are pushed. So I assummed it was a keyboard issue and that the keyboard needs to be replaced, but it has one of those touch pad cap lock buttons also, because even when I press that button it tends to not react. So how can that be fixed with a keyboard replacement or is that connected still? EDIT - I followed the direction with the following code in notepad and it didn't do the job: Windows Registry Editor Version 5.00 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Keyboard Layout] “Scancode Map”=hex:00000000 00000000 0200000000 00003A00 00000000

    Read the article

  • Procurve Primary VLAN

    - by fukawi2
    I'm trying to depreciate usage of VLAN 1 on my ProCurve switches; 1 is unused. I understand that VLAN 1 must exist, but I want to remove it from all ports, especially trunks between switches. The problem I have is that stacking does not seem to work without VLAN 1. I have changed the primary VLAN and management VLAN on all the switches: (config)# primary-vlan 42 (config)# management-vlan 42 (config)# no vlan 1 untagged 25 Port 25 is the link between the 2 switches I'm testing with; the stack master and a member switch; I only want tagged traffic between the switches, no untagged frames. show stacking on the master shows all members as "UP" but I can not telnet any of them: Telnet failed: Connection timed out. All switches have manually assigned (static) IP addresses on VLAN 42, and all exist in the same /25 subnet, as does my desktop. I can telnet the switches directly from my desktop to the individual switch IP addresses, just not from the master switch. Do I need to reboot the switches to have the primary-vlan change take effect? Or is there something else I'm missing?

    Read the article

  • Move OS from RAID5 array to RAID 1 arrays

    - by Antoine
    I want to give a last boost to my old ProLiant ML350 G5 server which just needs to be reliable for a few more year only ! With a defined budget of about 1500$ (I do not have more), i plan to replace the CPU (+ adding a second one), the battery cache of my raid controller (E200i), double the RAM, and change all hard drives. I have 7 HDD (SAS 10krpm, 72Gb) + 1 spare in RAID5, and my system is all FULL (no empty tray, full disks). in my current RAID5 array, I have 2 partitions: - 1 OS partition, 20Gb - 1 data partition, 350 Gb I plan to replace these 8 disks with : - 2 x 300Gb SAS 15krpm in RAID 1 (= 1 partition for OS) - 2 x 2Tb SATA 7.2krpm in RAID 1 (= 1 partition for DATA) My biggest constraint is that I have only 01 day to upgrade my server. Therefore, I'm looking for cloning all my files (OS + data partition) to my new arrays, i.e : - the OS partition shall be cloned to the RAID1 "2x300Gb array" - the data partition shall be cloned to the RAID1 "2x2Tb array" My second problem is that I need to physically remove all the old hard drives before inserting the new ones. I'm running Windows Server 2003 R2, and even if MS support will expire soon, I cannot buy a new licence and spent time in configuration. Obviously, with 1500$, I cannot also buy a new server that I could start configuring from now ! Thought about ASR (NTBackup), but I have no floppy drive (and do not really want to invest in one !) Thought about a clonezilla clone, and read this interesting link : Windows Server 2003 - move C: partition to a new SAS disk , but i'm not so confident in using Clonezilla with RAID5. What should be the best option to quickly and easily (if possible!) "copy/paste" my OS (so no need to reinstall and reconfigure all) and DATA / programs / services, etc... ? Thanks for your comments

    Read the article

  • Raid5 is off on my Lefthand P4500

    - by Soeren
    I have 1 cluster with serveral p4500. There is HW Raid5 and the Raid5 is split on: first 6 is one raid 5, and the other 6 is one raid 5. There were two disk that came up with a fault. I replaced both disk in same Raid5. Now the storagesystem says that Volumes is unaccessable and the Raid5 of the P4500 is down. How can I get the lefthand up and working again? Ive tried to put the old disk in the P4500 again, but this does not help. I also tryed to restart the disk shelf as well. Do you have any idea? Or something to get it to work again?

    Read the article

  • Can different drive speeds and sizes be used in a hardware RAID configuration w/o affecting performance?

    - by R. Dill
    Specifically, I have a RAID 1 array configuration with two 500gb 7200rpm SATA drives mirrored as logical drive 1 (a) and two of the same mirrored as logical drive 2 (b). I'd like to add two 1tb 5400rpm drives in the same mirrored fashion as logical drive 3 (c). These drives will only serve as file storage with occasional but necessary access, and therefore, space is more important than speed. In researching whether this configuration is doable, I've been told and have read that the array will only see the smallest drive size and slowest speed. However, my understanding is that as long as the pairs themselves aren't mixed (and in this case, they aren't) that the array should view and use all drives at their actual speed and size. I'd like to be sure before purchasing the additional drives. Insight anyone?

    Read the article

  • Why I'm unable to use up/down arrows in my BIOS?

    - by nexus
    My BIOS is loading and when I wanted to change anything, the up/down arrows aren't working. What might be the problem? I want to change boot options, but I'm unable to select the boot from CD option. My BIOS version is f2.3. Do I need to upgrade it? I need my system for 2 more months continuously and I'm afraid if there might be some problem upgrading. But anyway, what might be the cause for this behavior? For you info I have the pavilion dv6 series laptop, BIOS version: f.23 processer: Intel(R) core(TM) i3 CPU M 370 @ 2.40ghz 2.40GHZ 2.40 GHZ

    Read the article

  • Trying to test space in filesystem on Unix

    - by Buzkie
    I need to check if I Filesystem exists, and if it does exist there is 300 MB of space in it. What I have so far: if [ "$(df -m /opt/IBM | grep -vE '^Filesystem' | awk '{print ($3)}')" < "300" ] then echo "not enough space in the target filesystem" exit 1 fi This throws an error. I don't really know what I'm doing in shell. My highest priority is AIX but I'm trying to get it to work for HP and Sun too. Please help. -Alex

    Read the article

  • Problems with mounting .ISO files

    - by user89599
    I'm using Precise, with GNOME. I've attempted to install some retro, multi-cd games (KOTOR1) via .ISO images and WINE, but I can't get the ISO's to mount correctly. First I tried GMountISO, which showed a read-only warning but worked - until I went to unmount. When the installation program asked for CD 2 I couldn't unmount from the /cdrom folder because neither GMountISO or umount from terminal could detect the mount. After a reboot, I changed to GISOMount (different somehow, I guess?), but when I attempt to mount the ISO I get an error window explaining the syntax of the mount command and, which is also what I get when I attempt to use mount from terminal. After checking /media from terminal on a lark I see the disc mounted there twice over, but umount won't recognize it, even when I specify the full path sudo umount /media/KOTOR_1.iso. It cleared up upon reboot. Can someone please assist? UPDATE :: Thanks for the quick response. What's weird, is the images are like stuck in limbo... I'll show you: sc@sc-HP-110-3700:/media$ ls cdrom KOTOR_1(0)(vcd) KOTOR_1(vcd) sc@sc-HP-110-3700:/media$ cd cdrom sc@sc-HP-110-3700:/media/cdrom$ ls sc@sc-HP-110-3700:/media/cdrom$ cd .. sc@sc-HP-110-3700:/media$ umount KOTOR_1(vcd) bash: syntax error near unexpected token `(' sc@sc-HP-110-3700:/media$ umount KOTOR_1.ISO umount: KOTOR_1.ISO is not mounted (according to mtab) sc@sc-HP-110-3700:/media$ sudo umount -a umount: /run/shm: device is busy. (In some cases useful info about processes that use the device is found by lsof(8) or fuser(1)) umount: /run: device is busy. (In some cases useful info about processes that use the device is found by lsof(8) or fuser(1)) umount: /dev: device is busy. (In some cases useful info about processes that use the device is found by lsof(8) or fuser(1)) umount: /: device is busy. (In some cases useful info about processes that use the device is found by lsof(8) or fuser(1)) sc@sc-HP-110-3700:/media$

    Read the article

  • dropbox slow on ubuntu 14.04

    - by Donbeo
    My dropbox syncing is incredibly slow... I am using dropbox from the ubuntu repository on an almost fresh ubuntu installation. I would like to avoid to install the package from the dropbox website for the reasons explained here Dropbox Upgrade Is someone having the same problem? How can I solve? EDIT : This is an example of what I get. donbeo@donbeo-HP-EliteBook-Folio-9470m:~$ dropbox status Syncing (17 files remaining, 22 secs left) Uploading 17 files (123.3 KB/sec, 22 secs left) donbeo@donbeo-HP-EliteBook-Folio-9470m:~$ dropbox status Syncing (17 files remaining, 3 mins left) Uploading 17 files (13.2 KB/sec, 3 mins left) donbeo@donbeo-HP-EliteBook-Folio-9470m:~$ dropbox status Syncing (17 files remaining, 5 mins left) Uploading 17 files (8.2 KB/sec, 5 mins left) donbeo@donbeo-HP-EliteBook-Folio-9470m:~$ dropbox status Syncing (17 files remaining) Uploading 17 files... donbeo@donbeo-HP-EliteBook-Folio-9470m:~$ dropbox status Syncing (17 files remaining) Uploading 17 files... donbeo@donbeo-HP-EliteBook-Folio-9470m:~$ EDIT: I have run sudo dropbox update so I am probably using the last version of dropbox

    Read the article

  • Black screen while booting, after installing installing AMD Catalyst™ 12.8 Proprietary Linux x86 Display Driver on HP pavilion dm4

    - by Megharaj
    HP Pavilion dm4 with configuration as shown below cpu intel Core i5 2.26 GHz RAM 4.0 GB Graphics processor 512MB ATI Mobility Radeon(TM) HD 5450 switchable graphics [HDMI, VGA]. I installed ubuntu 10.04 ( without AMD graphics driver) it was working fine, but when I installed AMD graphics drivers AMD Catalyst™ 12.8 Proprietary Linux x86 Display Driver, than the problem started from then When I boot I was get black screen. Than I thought to upgrade from ubuntu 10.04 to 12.04 using the bootable pen drive but was getting black screen than read on some forums that was because of the switchable graphics, than upgraded ubuntu 12.04 by setting to "nomodeset". It was working, again thought to install graphics driver AMD Catalyst™ 12.8 Proprietary Linux x86 Display Driver, again after installing this, when I boot I am getting blank scree . Can anyone help me to inatall ubuntu 12.04 along with AMD Catalyst™ 12.8 Proprietary Linux x86 Display Driver. Any help is highly appreciated.

    Read the article

< Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >