Search Results

Search found 2609 results on 105 pages for 'htc hd 7'.

Page 33/105 | < Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >

• No image from graphics card but image from onboard video

  - by ReAzem

  I have an HD 5970 running on a P8Z68-v LE motherboard and I have no image comming out of the graphic card. When I plug my screen on my motherboard, I see the bios and the OS. When I plug my screen on the graphic card, I don't see anything. I know that the graphic card works because I have tested it on another computer. I know the motherboard works because I tested it with another graphic card and it worked. I know that the graphic card works with the computer because I have another computer with a P8Z68-LE and an HD 5970. I know it is not an OS issue because I should atleast be able to see the bios. I have tried unplugging my HDDs so that the OS dont interfere with anything. Using a 1000W power supply Using another HD5970 on the computer works. So this is a problem with my HD5970, but why is the graphic card working on my other computer?

  Read the article

• No audio driver for ECS 7050-M v1.0a for Windows 7?

  - by NudeRaider

  I have an Elitegroup 7050-M v1.0a motherboard and I've used the Realtek HD audio driver it came with for years under Windows XP. There was a nice mixer panel, an equalizer and sound profiles that added effects. All of these menus are gone now that I've moved on to Windows 7 64 Bit. All I have is the basic settings under system control - sound, but they are not nearly as detailed. To clarify: Sound works, but the advanced settings I got when using older OS's are gone. Older drivers don't seem to work under Win7 and I can't find one for Win7. So how can I fully utilize the capabilities of my HD sound chip under Win7?

  Read the article

• Effective system to backup this setup?

  - by user71785

  I currently have my development environment on a usb hd. It has things like portable xampp, virtualbox with ubuntu guest, portable firefox and other dev tools. It works fantastic! I can attach it to almost any computer and all works fine. However, if this drive decides to go suicide on me I will be close behind it. The problem I'm having is I use this portable HD almost all the time and so I need a fast way to backup the entire drive. It is around 400gb. Any advice?

  Read the article

• Gnome 3 freezes on logon on samsung RV 509

  - by Noufal

  I have a Samsung NP-RV509 A0FIN and I tried to install GNU/Linux with gnome 3.2 on it. I tried Fedora 16, Ubuntu 11.10 and Linux Mint 12 RC, but with no success. All of these freezes upon login into gnome shell. I think it is the problem with graphics driver, so I tried xorg-edgers ppa on my last installation, ie., Linux Mint. I also tried various intel graphics packages listed on Synaptic package manager, but no success again. My device configuration is as follows(obtained from windows 7): More details about my computer Component Details Subscore Base score Processor Intel(R) Pentium(R) CPU P6200 @ 2.13GHz 5.6 4.6 Memory (RAM) 4.00 GB 7.2 Graphics Intel(R) HD Graphics 4.6 Gaming graphics 1562 MB Total available graphics memory 5.2 Primary hard disk 12GB Free (50GB Total) 5.9 Windows 7 Ultimate System -------------------------------------------------------------------------------- Manufacturer SAMSUNG ELECTRONICS CO., LTD. Model RV409/RV509/RV709 Total amount of system memory 4.00 GB RAM System type 32-bit operating system Number of processor cores 2 64-bit capable Yes Storage -------------------------------------------------------------------------------- Total size of hard disk(s) 418 GB Disk partition (C:) 12 GB Free (50 GB Total) Media drive (D:) CD/DVD Disk partition (E:) 526 MB Free (191 GB Total) Disk partition (F:) 101 GB Free (177 GB Total) Graphics -------------------------------------------------------------------------------- Display adapter type Intel(R) HD Graphics Total available graphics memory 1562 MB Dedicated graphics memory 64 MB Dedicated system memory 0 MB Shared system memory 1498 MB Display adapter driver version 8.15.10.2202 Primary monitor resolution 1366x768 DirectX version DirectX 10 Network -------------------------------------------------------------------------------- Network Adapter Realtek PCIe GBE Family Controller Network Adapter Broadcom 802.11n Network Adapter Network Adapter Microsoft Virtual WiFi Miniport Adapter Notes -------------------------------------------------------------------------------- The gaming graphics score is based on the primary graphics adapter. If this system has linked or multiple graphics adapters, some software applications may see additional performance benefits. Any help is appreciated, and thanks in advance.

  Read the article

• GLSL compile error when accessing an array with compile-time constant index

  - by Benlitz

  I have this shader that works well on my computer (using an ATI HD 5700). I have a loop iterating between two constant values, which is, afaik, acceptable in a glsl shader. I write stuff in two arrays in this loop. #define NB_POINT_LIGHT 2 ... varying vec3 vVertToLight[NB_POINT_LIGHT]; varying vec3 vVertToLightWS[NB_POINT_LIGHT]; ... void main() { ... for (int i = 0; i < NB_POINT_LIGHT; ++i) { if (bPointLightUse[i]) { vVertToLight[i] = ConvertToTangentSpace(ShPointLightData[i].Position - WorldPos.xyz); vVertToLightWS[i] = ShPointLightData[i].Position - WorldPos.xyz; } } ... } I tried my program on another computer equipped with an nVidia GTX 560 Ti, and it fails to compile my shader. I get the following errors (94 and 95 are the lines of the two affectations) when calling glLinkProgram: Vertex info ----------- 0(94) : error C5025: lvalue in assignment too complex 0(95) : error C5025: lvalue in assignment too complex I think my code is valid, I don't know if this comes from a compiler bug, a conversion of my shader to another format from the compiler (nvidia looks to convert it to CG), or if I just missed something. I already tried to remove the if (bPointLightUse[i]) statement and I still have the same error. However, if I just write this: vVertToLight[0] = ConvertToTangentSpace(ShPointLightData[0].Position - WorldPos.xyz); vVertToLightWS[0] = ShPointLightData[0].Position - WorldPos.xyz; vVertToLight[1] = ConvertToTangentSpace(ShPointLightData[1].Position - WorldPos.xyz); vVertToLightWS[1] = ShPointLightData[1].Position - WorldPos.xyz; Then I don't have the error anymore, but it's really unconvenient so I would prefer to keep something loop-based. Here is the more detailled config that works: Vendor: ATI Technologies Inc. Renderer: ATI Radeon HD 5700 Series Version: 4.1.10750 Compatibility Profile Context Shading Language version: 4.10 And here is the more detailed config that doesn't work (should also be compatibility profile, although not indicated): Vendor: NVIDIA Corporation Renderer: GeForce GTX 560 Ti/PCI/SSE2 Version: 4.1.0 Shading Language version: 4.10 NVIDIA via Cg compiler

  Read the article

• Desktop Fun: 21 Cool Ubuntu Wallpapers

  - by Vivek

  Ubuntu 10.04 was released last month, and comes with some breath taking design enhancements, and has some fabulous art work integrated into it. We’ve put together a collection of wallpapers to make it more customized. We thought of pulling out some of the best Ubuntu wallpapers in this post so that you have a good mix to choose from when you are slightly bored of the default Lucid Lynx (Ubuntu 10.04) wallpaper. The following is a collection of top 21 Ubuntu wallpapers. To download the wallpaper just click on the hyperlink above the image. Ubuntu Wallpapers EgFox Lucid Lynx Blue 2010 by ~Eg-Art EgFox Lucid Lynx K HD 2010 by ~Eg-Art Lucid Lynx 10 04 by ~Momez Ubokeh Wallpaper Pack by ~giantspeck lucid fog brown by ~darkburt EgFox Lucid Lynx HD 2010 by ~Eg-Art LTS 2010 by ~alkore31 Ubuntu Bokeh by ~ttk1opc Ubuntu Aurora by *monkeymagico Ubuntu by ~gorkisview Ubuntu Glow by ~BigAction Destroy Ubuntu by ~lukeroberts Ubuntu Triskell by ~deviantdark Ubuntu 2.0 by ~monsteer Ubuntu leaves by ~sizakor Ubuntu Bokeh by ~freyr Ubuntu Brown leather distress by *monkeymagico Ubuntu Black Metal Hex by *monkeymagico Ubuntu gusty 4 walls by ~yf19-sama Ubuntu Wallpaper by ~Ruzzy2006 ubuntu-Gloss by ~SWOriginal Enjoy the new wallpaper to suit your desktop. You also might want to make sure and check out our Desktop Fun section for more collections of cool wallpapers. Similar Articles Productive Geek Tips Windows 7 Welcome Screen Taking Forever? Here’s the Fix (Maybe)Allow Remote Control To Your Desktop On UbuntuCheck your Disk Usage on Ubuntu from the command lineDual Monitors: Use a Different Wallpaper on Each Desktop in Windows 7, Vista or XPDesktop Fun: Starship Theme Wallpapers TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Enhance Your Laptop’s Battery Life With These Tips Easily Search Food Recipes With Recipe Chimp Tech Fanboys Field Guide Check these Awesome Chrome Add-ons iFixit Offers Gadget Repair Manuals Online Vista style sidebar for Windows 7

  Read the article

• Machine Check Exception

  - by Karl Entwistle

  When trying to install ubuntu-12.04-desktop-amd64.iso from USB I get one of the following errors http://en.wikipedia.org/wiki/Machine_Check_Exception states the error can occur due to -poorly fitted heatsink/computer fans (the same problem can happen with excessive dust in the CPU fan) -an overloaded internal or external power supply (fixable by upgrading) So I tried the following -Using rubbing alcohol to remove all the thermal paste from the CPU and heatsink, I then reseated the CPU after checking all the pins on the MOBO, everything seems fine. -Boot without the GPU to see if was the PSU that is being over stressed. -Removing all RAM apart from one stick and running a Memtest86 which it passed -Using Ubuntu 10.04.4 Desktop 64 bit (Different USB slots and USB sticks) -Using Ubuntu 12.04 Desktop 64 bit (Different USB slots and USB sticks) -Reset the BIOS using the Clear CMOS jumper -Removing all HD power cables and SATA cables -Updating the BIOS from F2 to F6 My PC is using the following parts. -Gigabyte GA-Z77-DS3H (F6 BIOS) -Intel Core i7 3770K 3.5GHz Socket 1155 -G-Skill 8GB (2x4GB) DDR3 1600Mhz RipjawsX Memory Kit CL9 (9-9-9-24) 1.5V -Be Quiet Shadow Rock Pro -Be Quiet Pure Power 730W Modular PSU -Sapphire HD 6870 1GB GDDR5 DVI HDMI DisplayPort PCI-E Graphics Card Any ideas?

  Read the article

• [MINI HOW-TO] Update Your Zune Player Software

  - by Mysticgeek

  Keeping your computer and software up to date is very important in keeping everything running smooth and secure. It’s also important to keep your geeky gadgets updated as well. Here we take a look at updating a Zune HD. Note: In this example we’re updating a Zune HD out of the box which hasn’t been updated yet. The first thing you’ll need to do if you haven’t already is download and install the latest Zune software (link below). Now plug your Zune into your computer with the included USB connection cable and give it a moment to be recognized. Next launch the Zune Desktop software and you should get the following screen. Just accept the EULA… Then the update kicks off. Make sure not to disconnect the Zune while the update takes place. The update will take a few minutes, and after it’s complete you should be good to go and can start using your Zune. To update your player in the future, go to General Settings then Player Update. Just like your computer’s hardware and software, you want to keep your other geeky gadgets updated as well. This will help the device run more smoothly, and sometimes add additional functionality. Download Zune 4.0 Similar Articles Productive Geek Tips Switch Ubuntu Server to use Internet Repositories Instead of cdromGreat Sounding Music and Skin Possibilities with XionExaile 0.3.0 is a Music Player for UbuntuMake VLC Player Look like Windows Media Player 11Unofficial Windows XP Themes Created by Microsoft TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Increase the size of Taskbar Previews (Win 7) Scan your PC for nasties with Panda ActiveScan CleanMem – Memory Cleaner AceStock – The Personal Stock Monitor Add Multiple Tabs to Office Programs The Wearing of the Green – St. Patrick’s Day Theme (Firefox)

  Read the article

• Persistence problem when installing USB Ubuntu variant using Windows

  - by Derek Redfern

  I'm part of a project called One2One2Go - we're developing a Live USB Ubuntu variant for use in schools in Somerville, MA. We have the project files compiled into an iso, and when installed using the native Ubuntu Startup Disk Creator, the USB works fine. When installed using a tool on a Windows machine (LiLi at linuxliveusb.com or liveusb-creator at fedorahosted.org/liveusb-creator), the USB works, but does not have persistence. This happens even if the creator is specifically set to allocate an area for persistent files. When comparing files on sticks created in Windows or Ubuntu, the one file that is different is syslinux/syslinux.cfg. I have printed the contents of the file below: Installed on Windows: DEFAULT nomodset LABEL debug menu label ^debug kernel /casper/vmlinuz append boot=casper xforcevesa initrd=/casper/initrd.gz -- LABEL nomodset menu label ^nomodset kernel /casper/vmlinuz append boot=casper quiet splash nomodset initrd=/casper/initrd.gz -- LABEL memtest menu label ^Memory test kernel /install/memtest append - LABEL hd menu label ^Boot from first hard disk localboot 0x80 append - PROMPT 0 TIMEOUT 1 Installed on Ubuntu: DEFAULT nomodset LABEL debug menu label ^debug kernel /casper/vmlinuz append noprompt cdrom-detect/try-usb=true persistent boot=casper xforcevesa initrd=/casper/initrd.gz -- LABEL nomodset menu label ^nomodset kernel /casper/vmlinuz append noprompt cdrom-detect/try-usb=true persistent boot=casper quiet splash nomodset initrd=/casper/initrd.gz -- LABEL memtest menu label ^Memory test kernel /install/memtest append - LABEL hd menu label ^Boot from first hard disk localboot 0x80 append - PROMPT 0 TIMEOUT 1 For troubleshooting reasons, I changed the Windows-created syslinux.cfg to match the one created by Ubuntu and persistence worked on it. I think the problem is that on the stick created by Windows, there is no "persistent" flag, but I don't know why. Is this a problem with our disk image or with the creator? How would I go about fixing this problem? Thanks in advance for your help. Derek Redfern

  Read the article

• How to improve battery life on Samsung 13.3” Series 7 Ultra (NP730U3E-S01AU)?

  - by beam022

  Recently I've bought a Series 7 Ultra Samsung ultrabook and decided to change the OS from originally installed Windows 8 to Ubuntu 14.04LTS. However, it's difficult not to notice great decrease in battery life: on pre-installed Windows 8 battery would last for about 6 hours while on Ubuntu it's almost empty after 2 hours of same kind of work (wi-fi, web, vlc, spotify, intellij idea). I'm not here to say that Ubuntu's battery performance is worse than Windows, but to ask for suggestions how to improve the situation (2 hours of work is pretty poor battery life). Can you recommend some sources, applications or tips/tricks that would improve battery life on my ultrabook? I really like the Ubuntu experience, but this makes my machine much less reliable. I suspect that graphic video card might be one of the issues here. Let me give you tech specs of the ultrabook: Processor: Intel® Core™ i5 Processor 3337U (1.80GHz, 3MB L3 Cache) Chipset: Intel HM76 Graphic: AMD Radeon™ HD 8570M Graphics with 1GB gDDR3 Graphic Memory (PowerExpress) and Intel(R) HD Graphics 4000 Display: 13.3" SuperBright+ 350nit FHD LED Display (1920 x 1080), Anti-Reflective Memory: 10GB DDR3 System Memory at 1,600MHz Hard-drive: 128GB Solid-state Drive More informations here, on the official page. If it's helpful to provide additional info, I'm happy to do it, just let me know what you need. Thank you.

  Read the article

• How to enable Unity 3D support in 12.04 using open-source drivers for RadeonHD cards?

  - by martin

  As the title says I can't enable the Unity 3D support when I'm using open-source drivers (xorg-edgers). I have an xfx Radeon HD 6950 by the way. If I install the proprietary 12.3 drivers from AMD it works, but I get poorer 2D performance than the open-source drivers and also I get some freezes and lock ups at random. So because of this I'm trying the open-source drivers and so far no issues at all, except this one. Running this command $ /usr/lib/nux/unity_support_test -p shows this: OpenGL vendor string: VMware, Inc. OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 0x300) OpenGL version string: 2.1 Mesa 8.0.2 Not software rendered: no Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: no And this command $ lspci -nn | grep VGA shows: 01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Cayman PRO [Radeon HD 6950] [1002:6719] So, is this normal? Do I need to go back to proprietary drivers to enable Unity 3D? If anyone can give me help, I'll much appreciate it.

  Read the article

• Wireless not detected on an hp Pavilion g6 - RT5390PCIe

  - by Earl Larson

  I just bought an HP Pavilion g6 laptop and I installed Natty Narwhal alongside Windows 7. In Windows 7, my WiFi works perfect but in Ubuntu it absolutely (no matter what I do) won't detect my home WiFi network. Here is the output of "lspci": earl@ubuntu:~$ lspci 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS880 Host Bridge 00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (int gfx) 00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0) 00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1) 00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) 00:11.0 SATA controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] 00:12.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:12.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:13.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:13.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 42) 00:14.1 IDE interface: ATI Technologies Inc SB7x0/SB8x0/SB9x0 IDE Controller (rev 40) 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40) 00:14.3 ISA bridge: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller (rev 40) 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (rev 40) 00:14.5 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI2 Controller 00:16.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:16.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control 01:05.0 VGA compatible controller: ATI Technologies Inc M880G [Mobility Radeon HD 4200] 01:05.1 Audio device: ATI Technologies Inc RS880 Audio Device [Radeon HD 4200] 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05) 03:00.0 Network controller: Ralink corp. Device 5390 04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5209 (rev 01) earl@ubuntu:~$

  Read the article

• Partitioning a hard drive before install

  - by yohbs

  I have a new ASUS laptop that I got from the university. The guys at the computing centre recieved it before me, erased the hard disk, and installed all their crappy software (Novel, outlook, and the like). I tried to install Ubuntu with dual boot, but because they apparently did whatever it is they did wrong, and the installer does not recognize the existing windows installation and only suggests to install Ubuntu as a sole OS. None of the advices here or here helped. My final decision is to indeed let Ubuntu erase all existing windows stuff (and then use windows occasionally through VirtualBox). However, when I try to do that it tells me that the partitioning looks like GPT but doesn't have the correct signatures, or something like this. It asks whether this is indeed a GPT HD, and I don't know what to tell it. What I ask is: should I simply use gparted from the CD to repartition the HD? If so, what would be the recommended partitioning (I have 750GB), and the recommended filesystem (ext3? ext4?). Update: here's a screen shot Thanks in advance for any advice.

  Read the article

• Amazon Upgrades FreeTime; More Content for the Kid-Friendly Walled Garden

  - by Jason Fitzpatrick

  Earlier this year Amazon introduced FreeTime, a walled garden area intended to provide a kids-only app gallery on the Kindle Fire. It was up to parents to populate the content but now, with the recent update, Amazon brings together unlimited books, movies, games, and apps. Intended for children ages 3-8 the upgraded service eschews the you-pick-it-all approach and goes with a hand-curated collection of games, educational apps, books and more. In addition to the pile of hand-curated content, FreeTime also has built in time limits and individual profiles for different children. Every Kindle Fire, Kindle Fire HD, and Kindle Fire HD 8.9″ user can try out the service for thirty days without charge. After the thirty day trial the subscription price is $4.99 per month ($2.99 for Prime members). Hit up the link below to check out the full description of the service. Amazon FreeTime [Amazon] Our Geek Trivia App for Windows 8 is Now Available Everywhere How To Boot Your Android Phone or Tablet Into Safe Mode HTG Explains: Does Your Android Phone Need an Antivirus?

  Read the article

• Copying files to Truecrypt file container hangs

  - by Wagner Maestrelli

  I have a dual boot installation with Windows 7 Ultimate (32-bits, NTFS file sytem) and Ubuntu 10.10 (32-bits, ext4 file system). I have installed the version 7.0a of Truecrypt in both Operating Systems. Located in the Windows 7 HDD I have a 150 GB encrypted file container. It is a standard and dynamic file container, which means it's not hidden and uses a sparse file. This file was created using the Windows version of the Truecrypt program. When I logon in Windows the container is mounted as the drive E: and everything works fine! In Ubuntu the Windows's NTFS file system is automaticaly mounted after I logon. I've configured that using the ntfs-config package. In my ~/.profile I have this line to mount the truecrypt's file container: truecrypt /media/7EDEBCFADEBCABB1/Users/Wagner/hd/hd.tc /media/truecrypt1 The file container is mounted after the logon without any problem. I can access it, copy files to/from it, etc. But when I try do copy relatively large amounts of data (~50 MB) to it via nautilus or cp -R, it starts the copy, copies some data until certain point and then it just hangs! The progress bar does not move anymore and nothing happens. There is no error, it just hangs and that's it. I have to kill the process myself. This problem does not happen in Windows: I can copy very large amounts of data to the container and it works great. But in Ubuntu the problem always happens! I mean, whenever I try to copy a bunch of files together the copy process hangs. Does anyone ever faced this problem? Can anyone help? Thanks!

  Read the article

• Bad 3D Performance in Ubuntu 12.04

  - by Pandem

  I already posted a question before but I didn't really get any advice/help. I'll be a bit more brief/general in hope it'll help. I have an MSI HD 7850 with the Catalyst 12.4 drivers installed. I've found that I'm having bad 3D performance for some reason but I'm not entirely sure what. I suspect it may just that the graphics card is new and AMD just need to work on their drivers but it would be nice to get advice and narrow the problem down so that I can be sure rather than wait for driver updates that may not even help. I ran gxlgears to give some general idea of how bad the performance is. At default size it is averaging around 2000 FPS. The command glxinfo confirms the renderer is using AMD Radeon HD 7800 Series with OpenGL version 4.2. Edits below: As asked for others: lspci -v output is here. fglrxinfo output is here xvinfo output is here glxinfo | grep rendering says yes for direct rendering. These confirmed that everything was configured correctly. Within Unity and Gnome Classic: glxgears had an FPS of around 2000 FPS fgl_glxgears had an FPS of around 544 FPS Within LDXE: glxgears had an FPS of around 4600 FPS fgl_glxgears had an FPS of around 1600 FPS In the end it was discovered that Compiz was causing a large performance decrease and solution was simply to change window manager for the time being. Thanks to TechZilla for all his help!

  Read the article

• Need a PCIe desktop graphics card for dual-monitor

  - by Graham

  I have a mid-2008 workstation with two HD monitors supporting HDMI and DVI inputs. Since Ubuntu 11.10, I have experienced no end of trouble with my NVidia Quadro NVS 290 in TwinView dual-monitor output. Others have similar desktop TwinView woes. I want a new graphics card. Previously I asked for a graphics card recommendation and response was Nvidia Geforce GTS 450... but really I'm looking for someone who has actually got a working dual-monitor desktop to tell me what card they use so I can get something that is known to work. So please, people who have no-issues with their 64-bit Ubuntu 12.04 Unity 3D desktop spread across two HD-resolution external monitors (either DVI or HDMI connector), and who also run Google Chrome (which throws a spanner due to its own GPU compositing)... please let me know what graphics card you have so I can buy one. Gathering Options These seem to be the Nvidia cards featuring dual DVI. But they all seem to be gaming cards - what has dual-DVI, good support, but is not a massive gaming card? Nvidia GTS 450 (previously recommended) - 2x DVI Nvidia GTX 550 Ti (used by System76) - 2x DVI Nvidia GT 430 (used by System76) - 1xDVI, 1xHDMI Nvidia GT 640 (found on NVidia site) - 1xDVI, 1xHDMI (also GT 620, GT 630) Has anyone had a good desktop dual-monitor Unity 3D experience with ATI cards?

  Read the article

• Wireless not detected on an hp Pavilion g6

  - by Earl Larson

  I just bought an HP Pavilion g6 laptop and I installed Natty Narwhal alongside Windows 7. In Windows 7, my WiFi works perfect but in Ubuntu it absolutely (no matter what I do) won't detect my home WiFi network. Here is the output of "lspci": earl@ubuntu:~$ lspci 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS880 Host Bridge 00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (int gfx) 00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0) 00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1) 00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) 00:11.0 SATA controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] 00:12.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:12.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:13.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:13.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 42) 00:14.1 IDE interface: ATI Technologies Inc SB7x0/SB8x0/SB9x0 IDE Controller (rev 40) 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40) 00:14.3 ISA bridge: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller (rev 40) 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (rev 40) 00:14.5 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI2 Controller 00:16.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:16.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control 01:05.0 VGA compatible controller: ATI Technologies Inc M880G [Mobility Radeon HD 4200] 01:05.1 Audio device: ATI Technologies Inc RS880 Audio Device [Radeon HD 4200] 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05) 03:00.0 Network controller: Ralink corp. Device 5390 04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5209 (rev 01) earl@ubuntu:~$

  Read the article

• Ubuntu 14.04 ATI Radeon open source driver with distorted video playback

  - by Bwog

  Video in VLC or SMplayer is often in black and white with washed-out colors in the wrong place (translated considerably). Moreover, the last video image is often visible when a new video is started and persist as long as the new video is running. Colors have a recognizable shape (e.g. a persons clothes or face), but can be obviously incorrect (e.g. green or purples faces). This is independent of the format of the videos (mp4, mkv, wmv). Sometimes all problems disappear when a new video is started, but often only a reboot restores normal video. Ubuntu was upgraded to 14.04 and is fully updated. Processor intel core i5-2500K cpu. gpu: amd/ati Radeon HD 7950. graphics: gallium 0.4 on AMD Tahiti. xorg xserver amd/ati display driver wrapper from xserver-xorg-video-ati. :~$ Xorg -version X.Org X Server 1.15.1 Release Date: 2014-04-13 X Protocol Version 11, Revision 0 Build Operating System: Linux 3.2.0-37-generic x86_64 Ubuntu Current Operating System: Linux Mare 3.13.0-29-generic #53-Ubuntu SMP Wed Jun 4 21:00:20 UTC 2014 x86_64 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-29-generic.efi.signed root=UUID=number ro Build Date: 16 April 2014 01:36:29PM xorg-server 2:1.15.1-0ubuntu2 Current version of pixman: 0.30.2 ~$ lspci | grep VGA 01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Tahiti PRO [Radeon HD 7950/8950 OEM / R9 280] Question: how to restore regular video playback?

  Read the article

• 12.04.1 no audio through HDMI

  - by JoJo

  having a bit of an issue with getting audio to go through HDMI. Here are the base specs: OS: Ubuntu Desktop 12.04.1 x64 CPU: AMD A10-5800K 3.8G 4M FM2 R Mobo: MSI FM2-A75MA-E35 OS: Ubuntu 12.04.1 LTS Vid Card: (integrated on CPU) AMD Radeon HD 7660D HDMI sound works fine under Win7 (after mobo and vid drivers are installed), so it's not physically broken. Audio through the normal headphone jacks works fine under Ubuntu. Looking at the audio panel, there is no HDMI output at all. aplay -l also reports only: card 0: Generic [HD-Audio Generic], device 0: ALC887-VD Analog [ALC887-VD Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 In additional drivers there are two versions: ATI/AMD PROPRIETARY FGLRX GRAPHICS DRIVER ATI/AMD PROPRIETARY FGLRX GRAPHICS DRIVER (post-release update) The first installs, but problem persists. I do get more resolutions to pick from. Second version does not, reporting it failed installation and to find details at: /var/log/jockey.log Looked at the log, and it's insanely long, if necessary I can get it to you guys. Did more research and some had luck by manually installing the drivers, so tried to give that a shot by following this: https://help.ubuntu.com/community/BinaryDriverHowto/ATI#Manually_installing_Catalyst_12.6 starting at 3.1 Manually installing Catalyst 12.6. I immediately had 2 issues, (1) the AMD website does not provide any drivers for Linux, and (2) the following command did not work: sudo sh amd-driver-installer-12-6-x86.x86_64.run --buildpkg Ubuntu/precise sh: 0: Can't open amd-driver-installer-12-6-x86.x86_64.run Some other posts stated to update "alsa-drivers", but that also did not work as install command for the new version of them did not work. I forget the exact issue, but similar to above, cannot open / cannot find. Any help would be greatly appreciated!

  Read the article

• Cannot use apt-get/dpkg -- Input/output error

  - by mecho

  I have bumped into an issue that doesn't allow me to do anything related to apt-get: install, remove, etc. Whenever I try to do something (e.g. sudo apt-get install firefox -f) it gives me the same error message: Reading database ... dpkg: unrecoverable fatal error, aborting: unable to open files list file for package `fontconfig-config': Input/output error E: Sub-process /usr/bin/dpkg returned an error code (2) I have tried to deal with the package `fontconfig-config' without success. I have found that the "Input/output error" is usually linked with physical problems of the hd, but I do not think that's the case I am using that hd without any other problem. I have tried removing the mention to the package in /var/lib/dpkg/status as mentioned here. I have tried deleting all files related to the package in /var/lib/dpkg/info as I found somewhere. But I still cannot do anything. The funny bit comes when I look for the file that is giving me troubles: mecho@Ansible-MS-7680:/var/lib/dpkg/info$ ls fontconfig* ls: cannot access fontconfig-config.list: Input/output error fontconfig.list fontconfig.postinst fontconfig.preinst fontconfig.triggers fontconfig.md5sums fontconfig.postrm fontconfig.prerm This is done after I deleted all files ... it looks like fontconfig-config.list still exists but it doesn't show up! Any idea about how to solve the problem? I am on kubuntu precise, fontconfig-config_2.8.0-3ubuntu9.1

  Read the article

• 12.04 No Sound - ALC888 / Radeon 3200HD

  - by Ross

  Evening all. I have a MSI U230 netbook, MV40 processor, 4Gb RAM with integrated ATI Radeon 3200HD grahics & an ALC888 codec integrated soundcard. It has HDMI out as well. I've tried a few distro's and have been around linux for a short time. I reckon I've settled on Ubuntu 12.04 (32bit) due to it doing pretty much everything I want it to. I'm working with a fresh install right now. I recently re-installed when I was going in circles trying to solve my problem before. I install Ubuntu and it works, except for the sound. I have tried things like reinstalling Alsa, editing my asound.conf file, installing HDA Verb and a few other things. Its at the point where I need to ask for help... Some outputs: ross@ross:~$ aplay -l ** List of PLAYBACK Hardware Devices ** card 0: SB [HDA ATI SB], device 0: ALC888 Analog [ALC888 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 ross@ross:~$ uname -r 3.2.0-34-generic-pae ross@ross:~$ lspci | grep VGA 01:05.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RS780M/RS780MN [Mobility Radeon HD 3200 Graphics] ross@ross:~$ lspci | grep Audio 00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) 01:05.1 Audio device: Advanced Micro Devices [AMD] nee ATI RS780 HDMI Audio [Radeon HD 3000-3300 Series] Added options snd-hda-intel position_fix=1 to alsa-base.conf file Unmuted all in alsamixer Can anyone suggest anything more?

  Read the article

• How do I access shared folders on Ubuntu server from Mac OS?

  - by Stephen

  I have an old dell desktop running ubuntu 11.04, I also have samba installed on it. I'm trying to access the shared folders on the Ubuntu machine from my Mac, so I go into 'Finder', click on 'Go' and 'Connect to Server'. I type in the ip address of the ubuntu machine smb://xxx.xxx.x.xx and click connect, I can then see the list of shared folders from the ubuntu machine so I know its making a connection. But when I access the 'Music' folder I get an error message stating: There was an error connecting to the server "xxx.xxx.x.xx". Check the server name or IP address, and try again. Any thoughts anyone ? EDIT I have a external hard drive attached to the server, and the folders I'm trying to access are located on that external hard drive. The location of the folder is /media/HD-CELU2/test, so I think the path from Finder should be smb://xxx.xxx.x.xx/media/HD-CELU2/test, but having tested this, I'm still not getting in. P.S. I'm using Samba as I have a Windows machine on my home network as well.

  Read the article

• Why is my Ubuntu 10.10 CD not booting?

  - by Tom Brito

  I have downloaded Ubuntu 10.10 and burned the ISO but it will not boot. I discarded problems with the ISO, as I've downloaded from the official website with no errors, and burned it with no errors. I discarded problems with the burning, as looks like it was recorded with no errors here and later in another computer. I discarded problems with my DVD reader as other cds boots fine. I'm currently using Ubuntu 9.10, I know I can upgrade via internet, but I have this same problem with my Windows XP cd, so I really would like to discover what's going on here.. My Ubuntu 9.10 cd boots just right, but the new one not. What else can be? Or what more precise tests can I make to discover where's the problem? --More info What happens when I try to boot with the Ubuntu 10.10 cd is that it behavior like there's no bootable cd in the drive. It just don't find the boot on the cd, and start the HD system. My notebook is an Amazon PC Intel Celeron 1.5 with 2Gb memory, a DVD-RW driver, HD samsung with 260GB.

  Read the article

• Trying to make ZeroRadiant work on Lubuntu 11.10

  - by maniat1k

  I'm looking to use ZeroRadiant to work on ubuntu, it's to create maps on urban terror, I know that works on windows and mac. I found this HOWTO but could not make it work. I've got stock on this when I do. ~/ZeroRadiant-src$ scons target=radiant,q3map2 config=release at the end shows me this: collect2: ld returned 1 exit status scons: *** [build/release/radiant/radiant.bin] Error 1 scons: building terminated because of errors. there's a note on the how to that says: If you get other errors, you may try asking for help in the GtkRadiant IRC channel, which is listed on the main ZeroRadiant page. the page does not there and I could find that IRC channel. EDIT thanks to @jokerdino in the chat sow me this If you have the proprietary NVIDIA driver installed and you get the following error when executing the build target above: /usr/bin/ld: cannot find -lGL collect2: ld returned 1 exit status scons: *** [build/release/radiant/radiant.bin] Error 1 scons: building terminated because of errors. then you should install one of the nvidia-glx-dev* packages as mentioned above in Step A, then try to execute the main build target to compile GtkRadiant again. I don't have nvidia; I do have ATI AMD Radeon HD 6320, and looks like it works. GL_VERSION: 4.1.11251 Compatibility Profile Context GL_VENDOR: ATI Technologies Inc. GL_RENDERER: AMD Radeon HD 6320 Graphics I'm think I do have video issues but.. how do I detect this? how can I continue?

  Read the article

< Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >