Search Results

Search found 4066 results on 163 pages for 'intel x25 m'.

Page 33/163 | < Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >

• wifi hardware switch doesn't work on a Dell 1018

  - by user42566

  I have a problem with my Dell 1018 Inspiron. I can't switch the wifi on, through the key on the keyboard. I think it's a driver problem since Ubuntu 11.10. This are the versions i tried: Ubuntu 10.04 / 10.10 It's possible to install the driver by hand: sudo add-apt-repository ppa:lexical/hwe-wireless sudo apt-get update sudo apt-get install rtl8192ce-dkms Ubuntu 11.04 It works out of the box Ubuntu 11.10 / 12.04 I haven’t found any solution for these versions. The "ppa:lexical/hwe-wireless" doesn't work for these versions. It says Can not find package rtl8192ce-dkms. The window of additional drivers is empty. So I can't install the driver. The wired network works good. Here is some information: 0: dell-wifi: Wireless LAN Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: yes sudo lshw -class network *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 05 serial: 5c:26:0a:0d:20:10 size: 10Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl_nic/rtl8105e-1.fw latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:43 ioport:2000(size=256) memory:f0f2c000-f0f2cfff memory:f0f18000-f0f1bfff *-network description: Wireless interface product: RTL8188CE 802.11b/g/n WiFi Adapter vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:07:00.0 logical name: wlan0 version: 01 serial: 70:f1:a1:fe:15:bd width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=rtl8192ce driverversion=3.2.0-22-generic-pae firmware=N/A ip=192.168.1.76 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 ioport:3000(size=256) memory:f0100000-f0103fff mark@mark-Inspiron-1018:~$ mark@mark-Inspiron-1018:~$ sudo lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation N10 Family DMI Bridge [8086:a010] 00:02.0 VGA compatible controller [0300]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a011] 00:02.1 Display controller [0380]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a012] 00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02) 00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02) 00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 02) 00:1d.0 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) 00:1d.1 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) 00:1d.2 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) 00:1d.3 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) 00:1d.7 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) 00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller [8086:27bc] (rev 02) 00:1f.2 SATA controller [0106]: Intel Corporation N10/ICH7 Family SATA Controller [AHCI mode] [8086:27c1] (rev 02) 00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 02) 05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 05) 07:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter [10ec:8176] (rev 01) mark@mark-Inspiron-1018:~$ mark@mark-Inspiron-1018:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 174f:1127 Syntek mark@mark-Inspiron-1018:~$

  Read the article

• Dell 3721 Wifi problem Ubuntu 13.04

  - by Sebastian

  I have a Dell 3721 which comes original with windows 8. I managed it to install ubuntu 12.10 on this laptop, even there was no out of the box drivers. With 12.10 I was forces to install this .deb package couple of times. After installing it, it was ok for some weeks before I have to install it again. Maybe some security updates destroy something which made in necessary to install it again... http://jas.gemnetworks.com/debian/pool/main/w/wireless-bcm43142/wireless-bcm43142-dkms_6.20.55.19-1_amd64.deb My problem is, that this package isnt working with ubuntu 13.04 anymore. So I cant use Wifi now. Also my display is almost dark, I cant change the brightness level with ubuntu 13.04. Hope you can give me some advice. Dell:~$ sudo lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor DRAM Controller [8086:0154] (rev 09) 00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) 00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) 00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04) 00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) 00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04) 00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) 00:1c.1 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 [8086:1e12] (rev c4) 00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) 00:1f.0 ISA bridge [0601]: Intel Corporation HM76 Express Chipset LPC Controller [8086:1e59] (rev 04) 00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04) 00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04) 01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 05) 02:00.0 Network controller [0280]: Broadcom Corporation BCM43142 802.11b/g/n [14e4:4365] (rev 01) @Dell:~$ lsusb Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 0a5c:21d7 Broadcom Corp. Bus 001 Device 004: ID 0bda:0129 Realtek Semiconductor Corp. Bus 001 Device 005: ID 0c45:64ad Microdia @Dell:~$ lspci -nn | grep VGA 00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) @Dell:~$ sudo lshw -class network *-network Beschreibung: Ethernet interface Produkt: RTL8101E/RTL8102E PCI Express Fast Ethernet controller Hersteller: Realtek Semiconductor Co., Ltd. Physische ID: 0 Bus-Informationen: pci@0000:01:00.0 Logischer Name: eth0 Version: 05 Seriennummer: xx:xx:xx:xx:xx:xx Größe: 100Mbit/s Kapazität: 100Mbit/s Breite: 64 bits Takt: 33MHz Fähigkeiten: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation Konfiguration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8105e-1.fw ip=192.168.2.103 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s Ressourcen: irq:42 ioport:2000(Größe=256) memory:c0404000-c0404fff memory:c0400000-c0403fff *-network UNGEFORDERT Beschreibung: Network controller Produkt: BCM43142 802.11b/g/n Hersteller: Broadcom Corporation Physische ID: 0 Bus-Informationen: pci@0000:02:00.0 Version: 01 Breite: 64 bits Takt: 33MHz Fähigkeiten: pm msi pciexpress bus_master cap_list Konfiguration: latency=0 Ressourcen: memory:c0500000-c0507fff

  Read the article

• 12.04 making BCM4313 card work with aircrack-ng?

  - by Charles Forest

  I'm a real Linux Noob, just started using it (this month) and until now i had no issues. now i'm trying to set-up aircrack-ng on my laptop, but it seems like it's using the worst card possible (or almost) there is a TON of tutorial on this card (seems to be hell to set-up) i have tryed some, but i ended up uninstalling my drivers, messing with my desktops, and ended by having no more "X" to close my windows (i have no clue how i ended there) i just re-installed my linux (took me 2 hours to setup everything again), but now i'm a bit "Scared" to try tutorials randomly again. Right now it says the driver is wl, wich is not the one i want (AFAIK it's not supported) i'm not sure what kind of informations are needed, but here's what i think could be usefull. lspci -knn 00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: agpgart-intel 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0101] (rev 09) Kernel driver in use: pcieport Kernel modules: shpchp 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: i915 Kernel modules: i915 00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: mei Kernel modules: mei 00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: ehci_hcd 00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b4) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 [8086:1c16] (rev b4) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 [8086:1c18] (rev b4) Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: ehci_hcd 00:1f.0 ISA bridge [0601]: Intel Corporation HM65 Express Chipset Family LPC Controller [8086:1c49] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel modules: iTCO_wdt 00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel modules: i2c-i801 01:00.0 3D controller [0302]: NVIDIA Corporation GF108 [GeForce GT 540M] [10de:0df4] (rev a1) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: nouveau Kernel modules: nouveau, nvidiafb WIRELESS CARD 02:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01) Subsystem: Wistron NeWeb Corp. Device [185f:051a] Kernel driver in use: wl Kernel modules: wl, bcma, brcmsmac REST... 03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: r8169 Kernel modules: r8169 04:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: xhci_hcd Also, if i'm "screwed" with my hardware, just tell me.

  Read the article

• graphic error on console

  - by Christian Elsner

  I have Linux on an embedded system. There is no graphic system, but I still have graphic errors. For example, if I type: ifconfig eth2 hw ether 00:0e:8c:d0:59:d2 I see: ifconfig eth hw ether 00:0e:8:2:2 If I type Enter, it accepts the command I typed, so it's just a matter of displaying. Everything is fine, when I log in via SSH. Anyone any ideas, what could be the cause or where to look at? Output of lspci: 00:00.0 Host bridge: Intel Corporation 3100 Chipset Memory I/O Controller Hub 00:00.1 Unassigned class [ff00]: Intel Corporation 3100 DRAM Controller Error Reporting Registers 00:01.0 System peripheral: Intel Corporation 3100 Chipset Enhanced DMA Controller 00:02.0 PCI bridge: Intel Corporation 3100 Chipset PCI Express Port A 00:03.0 PCI bridge: Intel Corporation 3100 Chipset PCI Express Port A1 00:1c.0 PCI bridge: Intel Corporation 631xESB/632xESB/3100 Chipset PCI Express Root Port 1 (rev 01) 00:1c.1 PCI bridge: Intel Corporation 631xESB/632xESB/3100 Chipset PCI Express Root Port 2 (rev 01) 00:1d.0 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #2 (rev 01) 00:1d.7 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset EHCI USB2 Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c9) 00:1f.0 ISA bridge: Intel Corporation 631xESB/632xESB/3100 Chipset LPC Interface Controller (rev 01) 00:1f.2 IDE interface: Intel Corporation 631xESB/632xESB/3100 Chipset SATA IDE Controller (rev 01) 00:1f.3 SMBus: Intel Corporation 631xESB/632xESB/3100 Chipset SMBus Controller (rev 01) 02:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection 03:01.0 Network controller: Siemens Nixdorf AG Device 4003 (rev 02) 03:01.1 Unassigned class [ff00]: Siemens Nixdorf AG Device 4003 (rev 02) 03:02.0 Ethernet controller: Siemens Nixdorf AG Device 4047 (rev 01) 03:03.0 Ethernet controller: National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller 03:04.0 Unassigned class [ff00]: Siemens Nixdorf AG Device 4057 (rev 01) 04:00.0 PCI bridge: Texas Instruments XIO2000(A)/XIO2200(A) PCI Express-to-PCI Bridge (rev 03) 05:00.0 Ethernet controller: Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE] (rev 44) 06:00.0 PCI bridge: Texas Instruments XIO2000(A)/XIO2200(A) PCI Express-to-PCI Bridge (rev 03) 07:00.0 VGA compatible controller: Silicon Motion, Inc. SM720 Lynx3DM (rev c1) 07:01.0 USB Controller: NEC Corporation USB (rev 43) 07:01.1 USB Controller: NEC Corporation USB (rev 43) 07:01.2 USB Controller: NEC Corporation USB 2.0 (rev 04) The whole thing is running on an Intel Core 2 Duo U2500

  Read the article

• Enabling and Disabling DCA

  - by Rayne

  Hi all, I'm using Linux Kernel version 2.6.33 on a server with Intel Xeon X5570. I assume that Intel's DCA is already enabled on my system, because I see # dmesg | grep dca dca service started, version 1.12.1 Am I right? I would like to test the effects of with and without DCA. How can I disable DCA? Thank you. Regards, Rayne

  Read the article

• Xcode xcconfig file and build rules

  - by g-Off

  I have an Xcode project that contains many sub-projects. The main project file and all sub-projects have the same xcconfig file. Some of the sub-projects currently have a build rule set on them to use the Intel compiler for C++ files. I'm wondering if there is a way to move this build rule into the xcconfig file so that I can easily turn on or off the Intel compiler for C++ files by changing just the one xcconfig file instead of having to modify the build rule for each sub-project

  Read the article

• My linux server takes more than an hour to boot. Suggestions?

  - by jamieb

  I am building a CentOS 5.4 system that boots off a compact flash card using a card reader that emulates an IDE drive. It literally takes about an hour to boot. The ultra-slow part occurs when Grub is loading the kernel. Once that's done, the rest of the boot process only takes about a minute to get to a login prompt. Does anyone have any suggestions? I suspect that it may have to do with UDMA. Everything IDE-related in my BIOS seems to checkout. The read performance hdparm is telling me 1.77 MB/s. Ouch! (But even at that rate, it still shouldn't take an hour to decompress and load the kernel) [root@server ~]# hdparm -tT /dev/hdc /dev/hdc: Timing cached reads: 2444 MB in 2.00 seconds = 1222.04 MB/sec Timing buffered disk reads: 6 MB in 3.39 seconds = 1.77 MB/sec Trying to enable DMA is a no-go though: [root@server ~]# hdparm -d1 /dev/hdc /dev/hdc: setting using_dma to 1 (on) HDIO_SET_DMA failed: Operation not permitted using_dma = 0 (off) Here's some command outputs that might help: System [root@server ~]# uname -a Linux server.localdomain 2.6.18-164.el5xen #1 SMP Thu Sep 3 04:47:32 EDT 2009 i686 i686 i386 GNU/Linux PCI info: [root@server ~]# lspci -v 00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02) Subsystem: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub Flags: bus master, fast devsel, latency 0 Capabilities: [e0] Vendor Specific Information 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) (prog-if 00 [VGA controller]) Subsystem: Intel Corporation 82945G/GZ Integrated Graphics Controller Flags: bus master, fast devsel, latency 0, IRQ 10 Memory at fdf00000 (32-bit, non-prefetchable) [size=512K] I/O ports at ff00 [size=8] Memory at d0000000 (32-bit, prefetchable) [size=256M] Memory at fdf80000 (32-bit, non-prefetchable) [size=256K] Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Capabilities: [d0] Power Management version 2 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01) (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 Flags: bus master, medium devsel, latency 0, IRQ 16 I/O ports at fe00 [size=32] 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01) (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 Flags: bus master, medium devsel, latency 0, IRQ 17 I/O ports at fd00 [size=32] 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01) (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 Flags: bus master, medium devsel, latency 0, IRQ 18 I/O ports at fc00 [size=32] 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01) (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 Flags: bus master, medium devsel, latency 0, IRQ 19 I/O ports at fb00 [size=32] 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller Flags: bus master, medium devsel, latency 0, IRQ 16 Memory at fdfff000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01 [Subtractive decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fde00000-fdefffff Prefetchable memory behind bridge: 00000000fdd00000-00000000fdd00000 Capabilities: [50] #0d [0000] 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) Subsystem: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge Flags: bus master, medium devsel, latency 0 Capabilities: [e0] Vendor Specific Information 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01) (prog-if 80 [Master]) Subsystem: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 17 I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at f800 [size=16] Capabilities: [70] Power Management version 2 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01) Subsystem: Intel Corporation 82801G (ICH7 Family) SMBus Controller Flags: medium devsel, IRQ 17 I/O ports at 0500 [size=32] 01:04.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ Flags: bus master, medium devsel, latency 32, IRQ 18 I/O ports at de00 [size=256] Memory at fdeff000 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 01:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ Flags: bus master, medium devsel, latency 32, IRQ 17 I/O ports at dc00 [size=256] Memory at fdefe000 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 01:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ Flags: bus master, medium devsel, latency 32, IRQ 19 I/O ports at da00 [size=256] Memory at fdefd000 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 hdparm ouput: [root@server ~]# hdparm /dev/hdc /dev/hdc: multcount = 0 (off) IO_support = 0 (default 16-bit) unmaskirq = 0 (off) using_dma = 0 (off) keepsettings = 0 (off) readonly = 0 (off) readahead = 256 (on) geometry = 8146/16/63, sectors = 8211168, start = 0 [root@server ~]# hdparm -I /dev/hdc /dev/hdc: ATA device, with non-removable media Model Number: InnoDisk Corp. - iCF4000 4GB Serial Number: 20091023AACA70000753 Firmware Revision: 081107 Standards: Supported: 5 Likely used: 6 Configuration: Logical max current cylinders 8146 8146 heads 16 16 sectors/track 63 63 -- CHS current addressable sectors: 8211168 LBA user addressable sectors: 8211168 device size with M = 1024*1024: 4009 MBytes device size with M = 1000*1000: 4204 MBytes (4 GB) Capabilities: LBA, IORDY(can be disabled) Standby timer values: spec'd by Vendor R/W multiple sector transfer: Max = 2 Current = 2 DMA: mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=120ns IORDY flow control=120ns Commands/features: Enabled Supported: * Power Management feature set * WRITE_BUFFER command * READ_BUFFER command * NOP cmd * CFA feature set * Mandatory FLUSH_CACHE HW reset results: CBLID- above Vih Device num = 0 CFA power mode 1: enabled and required by some commands Maximum current = 100ma Checksum: correct

  Read the article

• Nokia et Intel lancent la première version de Meego, l'OS pour les appareils mobiles issu de la fusi

  Maemo et moblin sont heureux de vous présenter leur premier bébé Meego[IMG]http://meego.com/sites/all/files/users/u3/peep_arms.png[/IMG] Pour ceux qui commence à me prendre pour fou, le 15 fèvrier dernier, nokia et Intel on annoncé lors du "Mobile World Congress" un partenariat pour le développement d'un nouvel OS mobile : Meego. Une combinaison de leurs OS Maemo (nokia) et moblin (Intel). Où Qt est le toolkit officiel [IMG]http://meego.c...

  Read the article

• Un représentant d'Intel très confiant sur l'avenir de MeeGo, Nokia aurait augmenté les salaires des employés travaillant sur l'OS

  Un représentant d'Intel très confiant sur l'avenir de MeeGo Nokia aurait augmenté les salaires des employés travaillant sur l'OS Peter Biddle, ancien employé emblématique de Microsoft actuellement manager général des produits et services chez Intel, s'est exprimé sur la controverse créée par l'annonce du partenariat stratégique entre Nokia et Microsoft. Selon lui, son impact serait très exagéré sur l'avenir de MeeGo. D'après Biddle, MeeGo a beaucoup de potentiel à long terme et peut toujours prétendre à la troisième place du marché des OS mobiles derrière Android et iOS. La possibilité de dév...

  Read the article

• The Loser In Our Windows vs. Linux Tests: Intel Graphics

  <b>Phoronix:</b> "We are still working on the first part of our Windows 7 vs. Ubuntu 10.04 LTS benchmarks that are set to be published early next week, but so far there is one easy conclusion to draw from the completed tests: Intel's Linux graphics driver is still no match to the Intel Windows driver."

  Read the article

• Intel veut accélérer la mise sur le marché de MeeGo et présente une tablette équipée de son OS mobile développé avec Nokia

  Intel veut accélérer la mise sur le marché de MeeGo Et présente une tablette équipée de son OS mobile développé avec Nokia En collaboration avec Hinault Romarick A l'occasion du Mobile World Congress 2011 de Barcelone, Intel a publié une démonstration filmée de son OS mobile open-source MeeGo s'exécutant sur une tablette. Le constructeur, partenaire de Nokia dans le développement du système d'exploitation, renouvelle ainsi son engagement dans le projet. Une vidéo sous forme de réponse quelques jours après le choix de Windows Phone 7 par Nokia pour équiper sa prochaine gé...

  Read the article

• Intel publie XDK HTML5, un outil libre de développement d'applications mobiles cross-platform, disposant d'un émulateur des OS populaires

  Intel publie XDK HTML5 un outil de développement d'applications mobiles cross-platform, disposant d'un émulateur des OS populairesIntel : un nom que beaucoup auraient du mal à associer au développement d'applications, et ce, même ci des projets comme OpenCV (Open computer Vision) ont été initié par la firme. En effet, le géant américain n'est reconnu pour la plupart que grâce aux puces qu'il produit.Détrompez-vous ! Intel est aussi engagé dans le développement d'applications mobiles multiplateformes comme le prouve son nouveau kit de développement « XDK HTML5 ». Ce dernier est libre et téléchargeabl...

  Read the article

• Testez Windows Server 2012 avec Ikoula, l'hébergeur basé à Reims met à jour sa gamme de serveurs dédiés avec les Ivy Bridge d'Intel

  Testez Windows Server 2012 avec Ikoula L'hébergeur basé à Reims met à jour sa gamme de serveurs dédiés avec des processeurs Intel de dernière génération L'hébergeur Ikoula vient d'annoncer qu'il avait mis à jour ses serveurs dédiés avec des processeurs Ivy Bridge d'Intel de dernière génération, des mémoires RAM allant de 4 à 32 Go et des disques pouvant supporter jusqu'à 2 To de données. Cette rentrée est également celle de Windows Server, avec l'arrivée de la version 2012 de la déclinaison pour serveurs...

  Read the article

• HP Compaq nc8230 hackintosh?

  - by David

  I have an HP Compaq nc8230 with a Pentium M (1.86GHz, SSE2) 1.5GB RAM, and an ATI Mobility Radeon x600 (64MB dedicated, 596MB shared). I'm trying to install Mac OS X Leopard on it. I have a legal copy of Leopard from apple, so I tried using the generic.iso and putting in the Leo DVD when it tells me to. It gets to the Apple logo with the spinny thing for maybe 5 minutes, but then the computer just restarts. I don't get past the apple logo. Then I tried using iDeneb 1.3 (10.5.5) but it doesn't boot into the DVD. My computer just ignores it and moves onto the hard drive. I would appreciate some help with either methods (moat prefferably the more legal one), I really need an intel Mac, my PowerBook G4 just doesn't cut it.

  Read the article

• Can the NVIDIA ION chipset handle streaming and gaming reasonable well?

  - by true_gritt

  I'm considering getting a small-footprint "nettop" computer to use as a home theater PC with my Samsung LN40A550 HDTV. I've been looking at systems like the AS Rock ION HT330, the Acer AspireRevo 3610, or the Asus EeeBox PC EB1501. These are all systems with NVIDIA ION chipset (Intel Atom N330 dual core CPU + NVIDIA GeForce 9400 GPU). Is the NVIDIA ION chipset powerful enough to support media streaming at HD resolutions (e.g. via Boxee, Hulu, Netflix) and casual gaming (e.g. World of Warcraft, Madden NFL) reasonably well without herky-jerky video output?

  Read the article

• How do I enable greedy MigrationHeuristic in Karmic?

  - by Matthew

  My laptop performs very poorly for 2d graphics. For example, Docky's zoom effect and compiz effects are very choppy. In Jaunty, I was able to fix this by adding the following line under the "Device" section in my xorg.conf: Option "MigrationHeuristic" "greedy" In Karmic, there is no xorg.conf by default, so I copied my old one (from Jaunty). However, everything is still slow. Here is my xorg.conf: Section "Device" Identifier "Configured Video Device" Option "MigrationHeuristic" "greedy" EndSection Section "Monitor" Identifier "Configured Monitor" EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" Device "Configured Video Device" EndSection From googling about, it sounds like "MigrationHeuristic" is only an option for the "EXA" mode, while Karmic has switched the intel driver to "UXA". So I tried adding this line under the "Device" section: Option "AccelMethod" "exa" But this didn't help.

  Read the article

• Recommended CPU upgrade for Dell Vostro 220 with E7300 processor?

  - by Justin Grant

  I've got a Dell Vostro 220 with an E7300 processor (Intel Core 2 Duo @ 2.66Mhz, LGA775 socket) and I'm thinking about upgrading my processor so I can run Windows Server 2008 R2 with Hyper-V, which requires Hardware Virtualization support in the processor. Yes, I know this is underpowered for a server, I'm actually using it as a desktop machine but I'd like to use Hyper-V instead of Virtual Server (which I'm using now for running VMs). I'd like to keep the same motherboard and ideally the same CPU fan and RAM too. Any suggestions for a good, relatively cheap (under $200) processor upgrade?

  Read the article

• Post Error, Fixed/Removable Media Error

  - by Dan

  Hi, I really do not know what I am missing here. I ordered parts for a new server. The board is an Intel s3420GP. From the diagnostic LEDs I get the error message: 0xB1h which corresponds to "Fixed Media: Disabling fixed media" and 0xB8h which corresponds to "Removable Media: Resetting removable media device." I can not for the life of me figure out what it is talking about. I have two identical motherboards and both gave the error message. I don't have a second CPU yet, so I can't test that. There are no beeps or anything. It seems the server resets every 10 seconds or so (the speaker does work, I put the RAM in the wrong slots on purpose to test this out, and the correct error POST code came up) Please help me, I'm not sure where else to turn or to ask

  Read the article

• Dual Core or Quad Core CPU for NetBeans/Eclipse development?

  - by cdb

  I am going to buy a new desktop CPU. I am a programmer who mainly uses NetBeans IDE for Java web application development, with GlassFish application server. I went through the discussion regarding Dual Core or Quad Core. My doubt is that software like IDEs (NetBeans, Eclipse, etc., with a server running) may not be written with multiple cores in mind? I am not a game addict... So what is best for me, and which company should I choose, AMD/Intel?

  Read the article

• PC doesn't select right monitor sometimes

  - by Madhur Ahuja

  I have an ACER LCD monitor with Intel G33/G31 display chipset. The preferred resolution for monitor is 1440x900. The drivers for both monitor and display are correctly installed and displayed in Device Manager section. However, I have observed, sometimes, in Display properties, my PC shows Display Device on: VGA instead of Display Device on: Acer , and when that happens, the resolution becomes distorted and I am unable to switch back to 1440x900. However, this problem resolves itself automatically sometimes between reboots. Any idea what's going on ?

  Read the article

• What is Light Peak

  - by Jonathan.

  I've heard this a lot recently, todo with Apple and Intel. Some says it's a protocol, others say it's fibre optic, and others say it's copper. One source even said it was a "wireless wire". Apparently it can carry data, but not video streams, surely the cable can't know the difference between 1s and 0s representing data, and 1s and 0s representing video streams. Or it will replace all the wires we currently have except power, another place said it is for inside laptops. Those are just examples so I haven't given any sources, I just want to know what on Earth Light Peak is?

  Read the article

• How can I be sure that the motherboard is dead and it's not another issue?

  - by Peter

  So I have and old computer with and Intel D101GGC motherboard and a pentium 4 cpu and award bios, with a long repeating beep and not passing POST. I tried: RAM checking, they are good and working on other computers Replacing the PSU with a tested one, and still having the same issue I assumed that the CPU is dead and tested 2 others they are both Celeron D processors I also tested the CPU of this computer on another one and it's working fine I also tried it without RAM and still have the same long beep I did all this after disconnecting all the other hardware like HDD and DVD drives. The only time I didn't get any beeps is after removing the CPU I don't know if the processor is needed for the beeps to work. So My questions are: is it normal to not get any beeps if we don't have a CPU installed ? am I missing something or is the motherboard dead ? and thanks in advance.

  Read the article

• Makefile fails to install file correctly, installing HPL

  - by zarose

  I started installing HPL a while ago, and had a related question. I've been following along with this guide from Intel. I figure this warrants a whole new one. When I try to make the archive, the output seems fine until the end, where it gives an error. make[2]: Entering directory `/hpl-2.0/src/auxil/intel64' Makefile:47: Make.inc: No such file or directory make[2]: *** No rule to make target `Make.inc'. Stop. make[2]: Leaving directory `/hpl-2.0/src/auxil/intel64' make[1]: *** [build_src] Error 2 make[1]: Leaving directory `/hpl-2.0' make: *** [build] Error 2 Going to the directory /hpl-2.0/src/auxil/intel64 shows a file, "Make.inc", but it's highlighted red, and the white text blinks. Is there a way to manually make that file? What do I need to do to get the makefile to do this for me?

  Read the article

• Virtualization of desktop

  - by Agares

  Hi! I'm thinking about virtualization of my laptop(for educational purposes). My idea is to install very light host OS and have all the rest as virtual machines. Microsoft's Hyper-V Standalone would be very good solution, but it's impossible to access virtual machine from computer, where the Hyper-V is the host(isn't it?). So, which virtualization software would be good for me? I wanna have virtualized Windows 7(and maybe some other windowses). My processor support Intel Virtualization Technology.

  Read the article

• ubuntu12.04 hangs at checking battery state

  - by crystalbass17

  My 12.04 system hangs at "Checking battery state". At this stage, no commands work eg: ctrl+alt+f1, alt+f5. I ran recovery mode, I ran the command sudo mount -o remount, rw sudo dpkg-reconfigure gdm and gdm was the only one installed so I didn't get a GUI screen. I have an integrated graphics card "Intel Corporation Mobile 4 chipset Integrated Graphics Controller (rev 07)". So I cannot install nvidia drivers as everyone else suggests. I have gone through several similar questions but everyone suggests reconfiguring gdm or reinstalling graphic drivers. I did sudo add-apt-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get upgrade to get the latest x-swat drivers. The system still hung at the same line. The other option is to reinstall ubuntu, which is out of the question, since we have a very specific install for our project where the settings are very hard to duplicate. Suggestions/Comments welcome.

  Read the article

< Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >