Search Results

Search found 5243 results on 210 pages for 'mirror drivers'.

Page 33/210 | < Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >

  • wget not converting links

    - by acrosman
    I am trying to mirror a fairly large site (20,000+ pages) prior to a major overhaul. Basically, I need a backup before cutting over to the new one in case we forgot something we need (we'll have about 1,000 pages at launch). The site is run on a CMS that I cannot easily extract usable data from, so I'm trying to make the copy with wget. My problem is that wget does not appear to be actually converting links, despite the presence of --convert-links or -k in the command. I've tried a couple of different combinations of flags, but I haven't been able to get the output I need. Most recent failed attempt was: nohup wget --mirror -k -l10 -PafscSnapshot --html-extension -R *calendar* -o wget.log http://www.example.org & I've also included the --backup-converted, and --convert-links instead of -k (not that it have mattered). I've done it with and without -P and -l, again no that they should matter. Results in files that still have links like: http://www.example.org//ht/d/sp/i/17770

    Read the article

  • wget not converting links

    - by acrosman
    I am trying to mirror a fairly large site (20,000+ pages) prior to a major overhaul. Basically, I need a backup before cutting over to the new one in case we forgot something we need (we'll have about 1,000 pages at launch). The site is run on a CMS that I cannot easily extract usable data from, so I'm trying to make the copy with wget. My problem is that wget does not appear to be actually converting links, despite the presence of --convert-links or -k in the command. I've tried a couple of different combinations of flags, but I haven't been able to get the output I need. Most recent failed attempt was: nohup wget --mirror -k -l10 -PafscSnapshot --html-extension -R *calendar* -o wget.log http://www.example.org & I've also included the --backup-converted, and --convert-links instead of -k (not that it have mattered). I've done it with and without -P and -l, again no that they should matter. Results in files that still have links like: http://www.example.org/ht/d/sp/i/17770

    Read the article

  • WGet or cURL: Mirror Site from http://site.com And No Internal Access

    - by alharaka
    I have tried wget -m wget -r and a whole bunch of variations. I am getting some of the images on http://site.com, one of the scripts, and none of the CSS, even with the fscking -p parameter. The only HTML page is index.html and there are several more referenced, so I am at a loss. curlmirror.pl on the cURL developers website does not seem to get the job done either. Is there something I am missing? I have tried different levels of recursion with only this URL, but I get the feeling I am missing something. Long story short, some school allows its students to submit web projects, but they want to know how they can collect everything for the instructor who will grade it, instead of him going to all the externally hsoted sites.

    Read the article

  • Excluding certain file types in wget

    - by Alan Spark
    I have been using wget for a while now to mirror files from an ftp server to a local folder. My wget command is as follows: wget -mirror -w 1 -p -nH -P /var/www/ ftp://my-ftp-server However, I just noticed that it is copying over a .listing file for every folder that it visits. So, even if nothing has been changed on the ftp server, a .listing file will always be copied. My understanding is that the .listing file is created when wget opens the ftp session. Is there a way to avoid this? I've tried the -R option (e.g. -R .listing) but this didn't help. See: http://www.gnu.org/software/wget/manual/wget.html#Recursive-Accept_002fReject-Options Thanks, Alan

    Read the article

  • How can I set up a dual-site Storage Daemon in Bacula (mirror the backup)

    - by Andy
    On site A, I have sucessfully set up a bacula director on one host, several File Daemons on the hosts I want to backup, and finally one Storage Daemon where the backup actually is stored. If disaster struck the building Site A, I want a second Storage Daemon on another site, Site B. The Filesets, Director etc would be the same, except the jobs will be stored on the other Storage Daemon as well. Are there any best practises on this?

    Read the article

  • Storage replication/mirror over WAN

    - by galitz
    Hello, We are looking at storage replication between two data centers (600km apart) to support an active-passive cluster design for disaster recovery. The OS layer will be mostly Windows Server 2003/2008 with some OpenSuSE Linux used for performance monitoring on VMWare or possibly XenServer. The primary application service to replicate is Nvision. Datacenter 1 will have two storage systems for local active-passive or perhaps active-active replication with Datacenter 2 used as a last resport disaster recovery site. We have a handle on most aspects, but I am looking for specific recommendations on storage platforms that can handle remote replication cleanly. Thanks.

    Read the article

  • How do I mirror a MySQL database?

    - by user45745
    I'm running two load balanced servers for one website, and I'd like the databases to be synchronized. Queries may be run on either of the two servers because they are both production sites, so the replication can't just work one way. It doesn't have to be in real-time, just fairly accurate so people don't notice a difference when they get switched to a different server.

    Read the article

  • Script to mirror MS SQL Server databases between 2 servers

    - by David W
    Hi I have about 200 sites each of which have 2 servers running MSSQL (2k5 at some sites, 2k8 at others) One server is production and the other is primarily there as a backup. We're rebuilding all of these servers this year and as part of that we will have to set up mirroring for ... a lot ... of databases. Some of these sites have 45 databases so mirroring them manually is going to be a huge pain. I was going to write a batch script which uses SQLCMD to backup the database and log, copies to the secondary server, restores the backup and log with norecovery, creates the endpoints and sets the partner. This in itself isn't too complicated, but i'd love to see what other people have done as i'm not very confident in catching errors using the process i've outlined above. I've seen Tools to manage sql 2008 database mirroring? Which looks really good, but the formatting is jumbled and I can't get it to work. If anyone has any other scripts they've written and are willing to share I'd be eternally grateful. Ideally I'd love to be able to use a script to ensure there are matching endpoints (same ports) on both servers, backup the database, backup the log, copy the backups to second server, restore database and log with norecovery, set the partners on both servers, and somehow confirm that the databases are linked and synchronized. Well, thanks for reading :)

    Read the article

  • Mirror network packets from WiFi to Ethernet in an ASUS Router RT N53

    - by fazineroso
    I have an ASUS RT N53 router, running the default firmware (Linux 2.6.22 with busybox and uclibc). I need to capture data packets from some Wi-Fi devices I have connected to that router (iPad and some smartphones), but the router is not forwarding any package coming from Wi-Fi devices to the Ethernet Ports. Any idea how can I proceed? Available tools in the router are iptables (no tee option, though), ebtables, brctl... Currently the ethernet and Wifi devices are forming a bridge: # brctl show bridge name bridge id STP enabled interfaces br0 8000.50465dc06be2 no vlan0 eth1 No ebtables rules: # ebtables -L Bridge table: filter Bridge chain: INPUT, entries: 0, policy: ACCEPT Bridge chain: FORWARD, entries: 0, policy: ACCEPT Bridge chain: OUTPUT, entries: 0, policy: ACCEPT

    Read the article

  • Setting Boot and Mirror Disks correctly at the Solaris OBP

    - by Shaun Dewberry
    I am recovering a domain that was lost due to power outage on an Sun Fire E25K server. I know how to set the appropriate parameters at the openboot prompt using nvalias/devalias, boot etc. However, I do not understand how one gets from the output of show-disks {1a0} ok show-disks a) /pci@1dd,600000/SUNW,qlc@1/fp@0,0/disk b) /pci@1dd,700000/SUNW,qlc@1/fp@0,0/disk c) /pci@1dc,700000/pci@1/pci@1/scsi@2,1/disk d) /pci@1dc,700000/pci@1/pci@1/scsi@2/disk e) /pci@1bd,600000/SUNW,qlc@1/fp@0,0/disk f) /pci@1bd,700000/SUNW,qlc@1/fp@0,0/disk g) /pci@1bc,700000/pci@1/pci@1/scsi@2,1/disk h) /pci@1bc,700000/pci@1/pci@1/scsi@2/disk q) NO SELECTION Enter Selection, q to quit: to the correct full disk path. I know it is basically one of the pci/scsi paths listed above, but in all instruction or examples a string of additional characters is appended to the path to specify Targets and Units but the explanation of the path construction is never given. Could someone please explain how to construct this disk path correctly?

    Read the article

  • How do I mirror a MySQL database?

    - by user45745
    I'm running two load balanced servers for one website, and I'd like the databases to be synchronized. Queries may be run on either of the two servers because they are both production sites, so the replication can't just work one way. It doesn't have to be in real-time, just fairly accurate so people don't notice a difference when they get switched to a different server.

    Read the article

  • Clone/mirror a textbox in a PDF form

    - by Tim Pietzcker
    I've got a PDF form in Acrobat X Pro where users can enter their name in a textbox on the first page. I would like the contents of that box to be cloned/mirrored in another box on the second page of the same form: However, in the Properties dialog of the second textbox, I can't find a way to reference the first one. I do have options to calculate numerical values and perform validation etc. etc., but I can't seem to simply have it display the contents of another textbox. Is this not possible in PDF forms, or am I overlooking something obvious?

    Read the article

  • Sony Ericsson Windows driver problem

    - by alex
    I've installed Update Service and MediaGo for my Sony Ericsson phone but one of the drivers that was installed along with the software is causing problems in Windows 7 x64. Looking in the Event Log I see the following warning: Detected unrecognized USB driver (\Driver\seehcri) This is the driver corresponding to the Sony Ericsson seehcri Control Device. The failure to recognize the USB driver is causing problems with other services, namely the VMware USB Arbitration Service. It should normally start automatically but, due to the failure to recognize the seehcri USB driver, it fails with the following error: Error 31: A device attached to the system is not functioning. Disabling the driver has not helped at all. The VMWare service still refuses to start and I keep getting both warnings in the Event Log. I would like to remove the Sony Ericsson driver but unfortunately, that's not possible. Uninstalling the Sony Ericsson seehcri Control Device from Device Manager causes Windows to almost completely freeze up while trying to look for drivers for unrecognized hardware. Windows tries over and over again to locate and install drivers for an Unknown device, failing every time. Looking in Device Manager, it simply fills up with hundreds of unknown devices, also using up the CPU to almost 85% in the process. What should I do? How can I safely remove the driver without causing Windows to look for a new driver?

    Read the article

  • SD Card reader not working on Sony Vaio

    - by TessellatingHeckler
    This laptop (Sony Vaio VGN-Z31MN/B PCG-6z2m) has been installed with Windows 7 64 bit, all the drivers from Sony's VAIO site are installed, and everything in Device Manager both (a) has a driver and (b) shows as working, no exclamation marks or warnings. "Hide empty drives" in Folder options is disabled so the card reader appears, but will not read the card ("please insert a disk in drive O:"). Previously, when the laptop had Windows XP on it, it could read the same card. Also, Windows update suggested driver ("SD Card Reader") doesn't work, Ricoh own drivers install properly but do the same behaviour. Other 3rd party driver suggestions from forums (Acer and Texas-Instruments FlashMedia) do not seem to install properly. I would post the PCI id if I had it, but it was just showing up as rimsptsk\diskricohmemorystickstorage (while it had the Ricoh Driver installed). Edit: If there are any lower level diagnostic utlities which might shed more light on it I'd welcome hearing of them. Anything which might show get it to put troubleshooting logs in the event log or identify chipsets or whatever... Update: Device details are: SD\VID_03&OID_5344&PID_SD04G&REV_8.0\5&4617BC3&0&0 : SD Memory Card PCI\VEN_8086&DEV_2934&SUBSYS_9025104D&REV_03\3&21436425&0&E8: Intel(R) ICH9 Family USB Universal Host Controller - 2934 PCI\VEN_1180&DEV_0476&SUBSYS_9025104D&REV_BA\4&1BD7BFCD&0&20F0: Ricoh R/RL/5C476(II) or Compatible CardBus Controller RIMSPTSK\DISK&VEN_RICOH&PROD_MEMORYSTICKSTORAGE&REV_1.00\MS0001: SD Storage Card PCI\VEN_1180&DEV_0592&SUBSYS_9025104D&REV_11\4&1BD7BFCD&0&24F0: Ricoh Memory Stick Host Controller WPDBUSENUMROOT\UMB\2&37C186B&1&STORAGE#VOLUME#_??_RIMSPTSK#DISK&VEN_RICOH&PROD_MEMORYSTICKSTORAGE&REV_1.00#MS0001#: O:\ STORAGE\VOLUME\{C82A81B8-5A4F-11E0-AACC-806E6F6E6963}#0000000000100000: Generic volume PCI\VEN_1180&DEV_0822&SUBSYS_9025104D&REV_21\4&1BD7BFCD&0&22F0: SDA Standard Compliant SD Host Controller ROOT\LEGACY_FVEVOL\0000 : Bitlocker Drive Encryption Filter Driver PCI\VEN_1180&DEV_0832&SUBSYS_9025104D&REV_04\4&1BD7BFCD&0&21F0: Ricoh 1394 OHCI Compliant Host Controller Now going to search for drivers for that.

    Read the article

  • How do I resolve BSOD: PAGE_FAULT_IN_NONPAGED_AREA?

    - by Burnzy
    I have been trouble shooting this for a few days and cannot fix this anyhow. Computer specifications Mobo: ASUS Sabertooth X58 LGA 1366 Intel X58 SATA 6Gb/s USB 3.0 ATX Intel Motherboard CPU: Intel(R) Core(TM) i7 CPU 920 (Bloomfield) @ 2.67 ( no OC ) RAM: 6144MB RAM GPU: 2x NVIDIA GeForce GTS 250 1Go in SLI (sli is not enabled anyway at the moment anyway) Drives: OCZ RevoDrive OCZSSDPX-1RVD0120 PCI-E x4 120GB PCI Express MLC Internal SSD [RAID-0]. (I know this could potentilly cause trouble but I had the BSOD before using this drive) Seagate Barracuda 7200.11 ST31500341AS 1.5TB 7200 RPM 32MB Cache SATA 3.0Gb/s 3.5" Internal Hard Drive - Bare Drive Click here for a log of a crash I just had. Click here for a log of a crash I had 30 minutes later, note that it's another driver. Some info Occurence: It seems pretty random so far, haven't noticed any kind of pattern I tried: Windows memory diagnostic (went smoothly at 1066mhz) As I said, it was still happening on my HDD, so when I bought the revodrive I install a new OS on there and still got the error, I believed it happened and I had no drivers installed at that point (not 100% sure) Change the following registry value to 1 (true): HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SessionManager \MemoryManagement\ClearPageFileAtShutdown Tried to lower even more ram clock Made sure ram timing was set to recommended by manufacturer Verified if motherboard was in good physical condition (yes and its brand new) There is one thing to note, when I got the new motherboard, I installed the new drivers WITHOUT formatting and the I removed the motherboard drivers that I could remove from the control panel (pretty much the first things that have been installed). Could this cause an issue even ON THE OTHER drive (revodrive). Hopefully someone can help me, I am getting tired of this, spending so much money and cannot get this to work correctly. If you need any other information let me know, thank you!

    Read the article

  • Driver issue for 7850 HD Diamond Windows 7

    - by Mr.Student
    I have an issue with windows 7 implementing the drivers ati provides for my 7850 HD Diamond video card. The video card is plugged in correctly to the PCIE 2.0 slots of my motherboard (p6t asus) with more then enough power. Fortunately the card works as I have my monitor plugged into the card itself and I can see just fine. However windows 7 does not replace the standard vga default microsoft driver with catalyst drivers that I've tried installing from online as well as the CD. Every time I install the drivers using Catalyst Install manager it always finishes with "Install complete(Warnings occured)". I then see the warnings it has which it instead reports that it successfully installed the SDK, Catalyst Install Manager, and HDMI/AUDIO packages. When I check my device manager after that, the display adapter still shows as standard vga and that its still using microsoft default display adapter. Now this current card is replacing an old card of mine which is the ATI 4890 HD which works beautifully. In fact for the old card to work, all I need to do is go to device manager and right click on standard vga - click update driver and windows 7 magically finds the correct driver to install and everything is good. Not so with the new card. I've even went into my regedits and uninstalled every bit of ati driver software before reinstalling my new card. Nothing's worked thus far. I've already exchanged my card out once and talked to customer support from my motherboard, microsoft, and ati all blaming the other. Please help me out!!

    Read the article

  • After update to Windows 8.1 brigthness isn't working (changing)

    - by Bibo
    I just update my Windows 8 to Windows 8.1 by Windows Store and I have some problems. My notebook is Acer Aspire Timelinex 3820TG and I know it's little old for Windows 8 but I install them and works fine (I updated my HDD to SSD). Now I just updated Windows and I have problem with changing brightness on my dedicated graphic card (Ati HD 5650). First I can changing brigthness with fn + keys but It just changing level in OS. No change in real. I tried reinstall drivers, install drivers for my card from Acer with compatibility to Windows 7 and without change. When I switch to integrated card changing brightness works. I think the problem is with drivers but I don't know how to get it working. Thanks for help Bonus question: I have another problem (but this one is not so important). Does anyone knows what msietxghh.exe is doing? Everytime when my system runs (after update) I get message that this program stops working but I just cancel and looks everything works fine.

    Read the article

  • LG W3000H-BN monitor cannot go above 1280x800

    - by Jo Profit
    I noticed that there are many people complaining about this issue with the W3000H but I have yet to find a solution that works for me. I am using Windows 7 Professional and and using a nVidia Quadro NVS 240 video card with a 4 monitor splitter cable. The cable from the monitor and the splitter are rated DVI-D Dual Link and the video card itself is rated for 2560x1600. I have installed the latest drivers for the video card and just grabbed the .inf, icm and cat file from the LG website and manually installed the monitor drivers. Does anyone have problems with the same setup? I have 3 other monitors (2 at 1920x1080 and 1 at 1280x1024). I really would like to be able to display the full resolution or else the large screen is useless. (I triple checked that the monitor itself supports this resolution). So monitor, cable, splitter and card supposedly support 2560x1600. Drivers are up to date but I cannot select that resolution when in the "Screen Resolution" menu, nor through the nVidia control panel. Please save me from madness :)

    Read the article

  • No sound through headset - only mic is working

    - by Kristis
    I noticed that no sound is being played to my headphones. The laptop has a conexant sound card together with the sounds apps provided. But the thing is that I also noticed that now instead of one playback device - 2 are presented: speakers and headphones. And while speakers do play sound nicely - even test sound are not played through headphone output. Also, headphone output does not have a jack assigned to it, while speakers have L R Rear panel Analog Jack(my laptop does not have a jack on the back - only on the right). Also - my headphones have a mic as well - and when I plug it in - the mic is working(using top panel digital jack),but the headphones themselves are not. And laptop is recognizing when audio device is plugged in. And I checked the headset on other devices - the headphones are working. I have tried updating drivers, rolling back drivers and completely uninstalling drivers and then restarting - nothing helped. I imagine that I somehow need to reconfigure the jack configuration just have no idea how and where. Any suggestions? Thanks

    Read the article

  • How to: mirror a staging server from a production server

    - by Zombies
    We want to mirror our current production app server (Oracle Application Server) onto our staging server. As it stands right now, various things are out of sync, and what may work in testing/QA can easily fail in production because of settings/patch/etc inconsistencies. I was thinking what would be best is to clone the entire disk daily and push it onto the staging server... Would this be the best method...?

    Read the article

  • mirror link for JavaEE 6 tutorial Example

    - by ManWard
    hi Oracle [Sun] don't let downloading anything from their websites for people from iran.[sad story for us because we are students and Researcher...] i need to samples of this tutorial : http://java.sun.com/javaee/6/docs/tutorial/doc/gexaj.html#gexba anybody can help me for finding mirror link for these samples or uploading samples ? I appreciate you. thanks

    Read the article

  • Logic to mirror byte value around 128

    - by Kazar
    Hey, I have a need to mirror a byte's value around the centre of 128. So, example outputs of this function include: In 0 Out 255 In 255 Out 0 In 128 Out 128 In 127 Out 1 In 30 Out 225 In 225 Out 30 I'm driving myself nuts with this, I'm sure I'll kick myself when I read the answers. Cheers

    Read the article

  • How does one mirror a maven repository?

    - by Randy
    Our company would like to mirror our Maven 2 Repository inside of the Amazon network. What software should one use to do this? We have looked into a Wagon-S3 but that sort of functionality is not desirable... we want the artifacts to already be present when we are ready for a build.

    Read the article

< Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >