Search Results

Search found 6100 results on 244 pages for 'power consumption'.

Page 33/244 | < Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >

  • Why Does My Windows 7 PC Freeze After Waking from Sleep?

    - by Blaenk
    Hey guys. I have Windows 7 running on my computer and everything is perfect. There's only one little problem. Sometimes when I leave my computer, I come back and my monitor is turned off or asleep, whichever it is. This is fine, I set it to do this. However, after turning on the monitor and moving the mouse around, the mouse cursor freezes; both the keyboard and mouse don't respond to anything, for example the keyboard's windows key won't bring up the start menu and moving the mouse around does not move the cursor around on the screen. I have to wait about a minute or two before things start working again. I figured this was a power savings setting problem, so I went into Control Panel Power Options. I only have Turn off Display = 30 minutes and Put Computer to Sleep = Never. Of course, I went into the advanced power settings to look through there. I put Never to turn off the hard disk, Sleep after never, and that's about it. Nothing else there looks like it might be causing this. I went into the device manager and checked the mouse and the keyboard, and they both have the Allow this device to wake the computer checked for both of them. Perhaps this other bit of information might help: Sometimes I VNC into my PC using my MacBook, and sometimes, as soon as it shows me the desktop, the same thing happens. The mouse won't move and VNC won't register any events on the server (Which is my PC of course). I close the client (And I know it has nothing to do with the client), then immediately restart it and try to connect. When I click the connect button, it hangs there, as if the PC is not responding. Basically it's like whenever I try to wake the computer from sleep, it does so by showing me the desktop, then it freaks out. Then again, I guess the computer isn't sleeping because the setting is set to 'Sleep after = Never'. I honestly don't know what's going on, would appreciate any insight. Thanks!

    Read the article

  • Laserjet Experts: How many power cycles per month?

    - by marienbad
    I recently got a nice Laserjet 8100DN for my house. I will probably never print more than 1% of its rated monthly duty cycle. But it runs some fairly noisy fans 24/7 if it's left on, so I am in the habit of turning the machine off as soon as I'm done with it. So, for all you who have a lot of experiencing administrating workgroup LaserJets, do you think I'll end up killing it from too many on-off cycles?

    Read the article

  • Dell PowerEdge 860 won't boot but gets power

    - by fierflash
    I have a Dell PowerEdge 860. Got an 2008 R2 running on it. Here is the scenario I'm currently in: I can boot it up and work as usuall. But when I restart it, it just shuts down, doesn't reboot, and it won't boot up again. Then it stays in this "mode", On/off button blinking green(standby mode?) and System Indicator LED blinking amber. If I try to press the On/Off button on the frontpanel it won't boot. It's like you can hear the fan from the PSU running but nothing else is trying to boot. If I unplug the powercable and then put it back in again it's the same, the extremley noisy fans won't start and it's just sitting there. If I let it "rest" for like 1 to 24 hours while the powercable is unplugged and I plug it in again, it boots directly, without me having to push the On/Off button. What I have tried: Run diagnostics(not the one in POST phase) and everything is fine Booting without any cables except the powercable Boot without memory installed Boot without the raidcable plugged in Cleared NVRAM Reseated all the components and cables Googling like a freak for any possible solution Tried Dell Support but I don't have any warranty left so they can't help me unless i pay some ridiculous amount of money I suppos Do anyone have some experience with the same issue? Do I need to replace something or is there any other way to determine the problem? Any help will be greatly appreciated.

    Read the article

  • Redundant APC UPS units, single server set up

    - by Sholom
    Hi All We have a very simple set up, looking for a very simple (reliable) solution: Setup: One Dell box with redundant power supplies running Windows 2003, plugged into two separate APC SmartUPS 1500 units (USB, no smart cards) on two separate circuits. Solution required: IF (UPS1 = Low) AND (UPS2 = Low) THEN: Shutdown gracefully ELSE: DO NOTHING!! APCUPSD only allowes for one instance (and therefore one UPS) in a windows environment. PowerChute can't do this without using APC Smart Cards which means utilizing our switch, but the switch does not have redundant power supplies, so it will only live for as long as one of the two UPS units. And no, i don't have the budget to buy two smart cards pluse a switch with redundancy ;) Thanks

    Read the article

  • Keyboard Slow on a high power machine.

    - by Tim Pierson
    I am having a terrible time with my high powered machine. The keyboard is not displaying the keys as quickly as I type. Sometimes I have to wait up to a minute for the key to display. When I type ahead it sometimes loses characters. I am not sure where to start looking for this problem. It started about a month ago and I still have not figured out why. It does not always do it. But acts up about 2-3 minutes out of ever hour of use or thereabout. How can I look to isolate and find the problem, and solve it?

    Read the article

  • Power Shell does not like command

    - by Campo
    Any ideas what I did wrong here? I copied this script from a tutorial and get this error.... PS C:\Windows\system32> Get-Service | Where-Object ($_.status -eq "running") Where-Object : Cannot bind parameter 'FilterScript'. Cannot convert value "False" to type "System.Management.Automation .ScriptBlock". Error: "Invalid cast from 'System.Boolean' to 'System.Management.Automation.ScriptBlock'." At line:1 char:27 + Get-Service | Where-Object <<<< ($_.status -eq "running") + CategoryInfo : InvalidArgument: (:) [Where-Object], ParameterBindingException + FullyQualifiedErrorId : CannotConvertArgumentNoMessage,Microsoft.PowerShell.Commands.WhereObjectCommand

    Read the article

  • solaris + EMC + power-path

    - by yael
    please advice - when I run powercf command on my Solaris machine , which changes this command do on the EMC storage , or on Solaris file system ? from maanual page: DESCRIPTION During system boot on Solaris hosts, the powercf utility configures PowerPath devices by scanning the HBAs for both single-ported and multiported storage system logical dev- ices. (A multiported logical device shows up on two or more HBAs with the same storage system subsystem/device identity. The identity comes from the serial number for the logical device.) For each storage system logical device found in the scan of the HBAs, powercf creates a corresponding emcpower device entry in the emcp.conf file, and it saves a primary path and an alternate primary path to that device.

    Read the article

  • HDD not detected whenever first power on (detected at BIOS level)

    - by Alvin Lim
    I am using Asus P8H61-M LX Motherboard with latest version of BIOS: 4401 One SATA-3 Western Digital Black Series 1.5TB is attached to SATA port 0 A Samsung 22x DVDRW SATA drive attached to SATA Port 1. ps/2 Logitech mouse and keyboard. CPU is i3 with DDR3 8Gb RAM. no other devices are installed. My problem is that when I turn on the computer, the WD HDD is not detected. ie cannot be booted. I have to press ctrl+alt+del in order to get it detected. I'd used the WD data lifeguard software to scan the HDD, the smart status is OK, the surface scan does not show any error at all. Where did I do wrong? Any advice is greatly appreciated.

    Read the article

  • BSOD after PC has been running for a while

    - by user1389999
    I'm having a problem where my computer is getting a blue screen. I have noticed that the BSOD happens after the PC has been running for about 2 days. The BSOD's seem to be an error with atikmpag.sys with an error code of 0x00000116. The problem started about a month ago.It has happened all five times that I left my computer on that long in the past month. Because my computer is a pre-built one from Dell, and I had upgraded the graphics card (at least a year ago) to a more demanding one, I replaced the stock 360W power supply that came with it. I replaced it with a more powerful, 680W one, because it seemed like the problem could be related to a lack of power supply wattage, but it didn't affect the problem at all. Here are the minidump files for the five BSOD's that I have experienced: https://dl.dropbox.com/u/3488338/bsoddumps.zip System info: Windows 7 Home Premium x64 Dell Studio XPS 435MT Radeon HD 5670 (Version 12.4 of the Catalyst driver) Intel Core i7 920 2.67 GHz 6GB of RAM

    Read the article

  • Mouse Hang with voltage fluctuation

    - by user265495
    I bought a new assembled PC about a month ago, but for the past 7 or 8 days I found my mouse cursor hangs every time there is a voltage fluctuation on my UPS (I guess it as when sound comes from ups then mouse hang for 2 or 3 sec. and them it goes normal again). My PC also seems to shut down while I'm working and it refuses to boot again - I end up needing to switch off my UPS and press and hold the power button for 30 seconds. It will then boot as per normal. Could the trouble be with my PSU? Am I potentially damaging my computer by pressing and holding the power button? I have : Motheboard : intel Chipset Model - DH61WWAAG23116-303 Processor : Intel Core i3 3.20 Ghz RAM : Zion 4 gb DDR3 HDD : 1 tb GRAPHICS : 2 gb NVIDIA GeForce GT-610 CABINET : Frontech Rock OS : Win 7 32 Bit

    Read the article

  • Windows 7 reboot and freezing, possible power problems?

    - by mikelbring
    My Gateway LX Series desktop is about 6-8 months old. When I bought it, it had Windows Vista. I then put the RC version of Windows 7 on it. About 3 months after I bought it, it would randomly start to reboot, actually just shut off. I monitored the temperature levels and they seemed normal. So I installed a fresh Windows 7 Ultimate OEM 64bit. It actually got worse and would reboot more frequently. I then contacted Gateway and they said my machine was built for Windows Vista (made me chuckle), and told me to update my BIOS. So I did, and it was fixed for a good couple months. Recently, it started to do it again. Now I noticed early on it was doing it most often, if not every time when I was either watching a flash video or playing a flash game. So I decided to download the drivers again and I also downloaded my motherboard drivers. Seemed to be okay. A week later it started doing it again. And now it's doing it even more frequently. Sometimes I would turn it on, login into Windows and *BAM!* it would shut off. Now I am at the point where I can hardly get it to turn on. It would freeze at the point where it says "Starting Windows", with the Windows logo. Sometimes it would say "Checking disk for consistency" or whatever and freeze there (not shut off, just freeze). I even got the prompt to launch startup repair. But that also freezes when it says starting Windows. It does not really freeze, just never loads up. I am kind of lost as to what's going on. I have a few ideas but nothing I want to pursue (graphics card? hard drive?). Another thing I did try was to boot into a live disk of Ubuntu and try to launch every program I could and get on the internet but I never got it to reboot. So it sounds like to me it's a Windows thing, but I have no idea. I am just stuck and would like to see if any one has any ideas or could lead me in the right direction.

    Read the article

  • Computer won't stay powered up

    - by Android
    I have just tried to turn my PC on this morning and it won't stay powered up. It will come on as normal for about 5 seconds, not quite long enough for the monitor to wake up. Then it will power off. After about 2 seconds it will start again, it will continue like this until I pull out the plug. Plugging it in again doesn't restart the cycle although pressing the power button does. I have tried to clear the cmos but beyond that I have no ideas. It was working perfectly when I put it in hibernate last night.

    Read the article

  • Forcing Windows to be 'awake' during certain hours?

    - by Mun
    I'm running Windows 7 and have the power options currently set up to put the machine to sleep after 2 hours of inactivity. Is there any way to force the machine not to sleep between certain hours, or to automatically wake up? I'm assuming this can't be done directly from within the Windows power settings, but is there a third party utility (preferably free) that could take care of this? I've got backups scheduled every morning at 3-4am, and these don't run if the machine is suspended, so I just need to make sure that the everything is powered up during this time.

    Read the article

  • where can i get cables for the canon Mx310

    - by Tarrasch
    Hey there, a friend of mine gave me a printer/scanner because he could not print with it anymore. the point is this thing has been lying in the cellar for quite some time now and the cables are missing. that is the power cable for my power plug ( there are foreign ones included) and more importantly the connection to the computer. I have googled around for a bit and tried to get to a hotline,but my problem is : Where can i get those cables from? Can anyne help me get a clue where to find those, where to ask for something like this? cheers

    Read the article

  • Why won't my computer turn off?

    - by kinglime
    I have recently replaced my old Corsair TX650M PSU with a new CoolerMaster Silent Pro Gold 800w PSU. With the old PSU when I turned off my computer from windows it would shut down and everything would turn off. The lights would turn off and the fans would stop turning. With my new power supply when I shut down windows It shows the usual shutting down dialog then my two monitors say "no signal" and turn off. The weird part however is that the lights stay on and the fans continue spinning forever until I manually hold the power button in for 4 seconds then finally everything shuts off. How can I emulate the previous behavior?

    Read the article

  • Computer won't stay powered up

    - by Android
    I have just tried to turn my PC on this morning and it won't stay powered up. It will come on as normal for about 5 seconds, not quite long enough for the monitor to wake up. Then it will power off. After about 2 seconds it will start again, it will continue like this until I pull out the plug. Plugging it in again doesn't restart the cycle although pressing the power button does. I have tried to clear the cmos but beyond that I have no ideas. It was working perfectly when I put it in hibernate last night. NOTE: I am using a Dell Optiplex 755 UPDATE 1: I took out the motherboard battery and it almost came on then it displays the message Error loading Operating System UPDATE 2: After taking out the custom video card, it says "No hard drive present"

    Read the article

  • No SATA drives after PSU Upgrade

    - by hauptbenutzer
    I know this sounds a lot like this but I just confirmed that my MBR is fine as well as the SSD drive in question. What happened: I upgraded my be-quiet 700w PSU to the 1000w dark power pro. When I tried booting the system and none of the drives (all SATA) were detected, resulting in the "Boot device failure" error. After that I unplugged all but the boot drive, triple checked that all cables were in fact nice and tight inside their sockets, replaced both e-SATA and power cables ; still with the same outcome. Finally I reconnected my old PSU and sure enough the PC booted without any hassle (except of course for the direful construction that is currently occupying my desk). Does anybody have any advice on how to proceed? Surely, it is possible the PSU is faulty but are there other explanations? Thanks in advance PS. if of any help: Motherboard is GIGABYTE GA-PH67A-UD3-B3 H67 LGA 1155

    Read the article

  • Prolog, check if term is power of 2

    - by Riku
    i have written following code, which should work with my logic, but it does not. I should check if given term is power of two. For example s(s(s(nul))) should return false, s(s(s(s(nul))) should return true. substractWhileY(X,0,rezult). substractWhileY(s(X),Y,rezult):- Y > 0, number is 1, substractWhileY(X,Y - number, rezult). degreeOftwo(X):- substractWhileY(X,2,rezult), pagalba(X, 2, rezult). calculateAnswer(X, currentCounter, currentValue):- currentCounter is currentCounter * 2, substractWhileY(currentValue, currentCounter , rezult), rezult\= null, calculateAnswer(X, currentCounter , rezult). My idea was to check if given therm is degree of any two and if it is not than it is not the degree of two. With numbers it should work like this. For example i give number 8. First time it checks if 8 - 2 = 0. second time if 8 - 4 = 0. third time if 8 - 8 = 0. so the 8 id power of two. Maybe other solution would work better, so thanks for any help.

    Read the article

  • what do the various USB charge while sleeping modes mean?

    - by MikeJ
    what do the various USB charge while sleeping modes mean? my new laptop has these sleep while charging modes : mode 4 mode 3 mode 2 mode 1 the list box doesn't tell me what these modes mean or do. I noticed that my iphone is charging really slowly on mode 4. What is it going to do to my power consumption if I change it to something like 1 or 2 ?

    Read the article

  • What could possibly cause my computer to power down at random times?

    - by geoffreydv
    I have recently bought a new Power Supply and a new graphics card. My PC ran smoothly for a few months now but since a couple of days I'm having a strange problem. I am trying to isolate the problem to a specific piece of hardware (because if it's either the Power Supply or the Graphics card they are still under warranty). The problem started when I was playing a game (diablo 3). My PC suddenly powered down. I was unable to turn it on again by pressing the power button. I unplugged the power cable for a few seconds and plugged it back in. This time the pc powered on but the indication light turned orange instead of white as it normally does. The fans were not spinning and I did not see anything on my screen. After trying a couple of times I gave up. Two days later I tried again and this time the PC did boot up as usual. Everything looked okay until I tested if the problem was resolved by starting Diablo again. After about two minutes it powered down again as it did the first time. If I don't run any games my PC does power down after about 3-5 hours. Another fact that might be relevant: One time the PC did not shut down immediatly, instead first my graphics "powered down" but the music I was playing kept on playing. After about 20 seconds the pc powered down completely as usual. What I also noticed is that when I boot instantly after a power down, the chance of another power down occuring is much higher. Does anyone have an idea what could be causing this kind of behaviour or has a certain tool to diagnose the specific hardware parts? Thanks Specs: Memory: 6GB Processor: Intel i5 OS: Windows 7 64 bit The PC is a Dell Studio XPS 8100 with a replaced PSU and Graphics card: PSU: Corsair CX500 (500 watt) Graphics card: AMD Radeon 6850

    Read the article

  • Trouble reinstalling Gem after power failure

    - by Sirupsen
    Yesterday I tried to install Jeweler via Rubygems, however somewhere in the middle of the process I had a power failure, resulting in my computer turning off in the middle of the installation process. Once I got it back up, I tried to reinstall Jeweler, however resulting in an error I've had trouble decoding. Does anyone have any idea on how to fix this problem? (I tried uninstall, cleanup and check)

    Read the article

  • Power function fit to data set

    - by czerasz
    I have a set of data (in ArrayCollection) and I need to fit a power function { f(x)= B + x^alpha } to it, before display in LineChart. As result I need the alpha and B paremeter. How to do this with Flex?

    Read the article

< Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >