Search Results

Search found 956 results on 39 pages for 'ramy al zuhouri'.

Page 33/39 | < Previous Page | 29 30 31 32 33 34 35 36 37 38 39  | Next Page >

  • pxe boot fails with message: no DEFAULT or UI configuration directive found

    - by spockaroo
    I am trying to pxe-boot a machine (client), and in the process I am trying to setup a tftp server that this machine can boot off. On the server, which runs Ubuntu 10.10, I have setup dhcp, dns, nfs, and tftp-hpa servers. All the servers/deamons start fine. I tested the tftp server by using a tftp client and downloading a file that the server directory hosts. My /etc/xinet.d/tftp looks like this service tftp { disable = no socket_type = dgram wait = yes user = nobody server = /usr/sbin/in.tftpd server_args = -v -s /var/lib/tftpboot only_from = 10.1.0.0/24 interface = 10.1.0.1 } My /etc/default/tftpd-hpa looks like this RUN_DAEMON="yes" OPTIONS="-l -s /var/lib/tftpboot" TFTP_USERNAME="tftp" TFTP_DIRECTORY="/var/lib/tftpboot" TFTP_ADDRESS="0.0.0.0:69" TFTP_OPTIONS="--secure" My /var/lib/tftpboot/ directory looks like this initrd.img-2.6.35-25-generic-pae vmlinuz-2.6.35-25-generic-pae pxelinux.0 pxelinux.cfg -- default I did sudo chmod 644 /var/lib/tftpboot/pxelinux.cfg/default chmod 755 /var/lib/tftpboot/initrd.img-2.6.35-25-generic-pae chmod 755 /var/lib/tftpboot/vmlinuz-2.6.35-25-generic-pae /var/lib/tftpboot/pxelinux.cfg has the following contents SERIAL 0 19200 0 LABEL linux KERNEL vmlinuz-2.6.35-25-generic-pae APPEND root=/dev/nfs initrd=initrd.img-2.6.35-25-generic-pae nfsroot=10.1.0.1:/nfsroot ip=dhcp console=ttyS0,19200n8 rw I copied /var/lib/tftpboot/pxelinux.0 from /usr/lib/syslinux/ after installing the package syslinux-common. Also just for completeness, /etc/dhcp3/dhcpd.conf the following lines (relevant to this interface) subnet 10.1.0.0 netmask 255.255.255.0 { range 10.1.0.100 10.1.0.240; option routers 10.1.0.1; option broadcast-address 10.1.0.255; option domain-name-servers 10.1.0.1; filename "pxelinux.0"; } When I boot the client machine, and watch the output over the serial port, I notice that the client requests an ip address from the server and gets it. Then I see TFTP being displayed - indicating that it is trying to connect to the TFTP server. This succeeds, and I see TFTP.|, which return immediately displaying the following message PXELINUX 4.01 debian-20100714 Copyright (C) 1994-2010 H. Peter Anvin et al No DEFAULT or UI configuration directive found! boot: /var/log/syslog shows Feb 20 15:24:05 ch in.tftpd[2821]: tftp: client does not accept options What option is it talking about in the syslog? I assume it is referring to OPTIONS or TFTP_OPTIONS, but what am I doing wrong?

    Read the article

  • Lighttpd 403 Errors on HTML and PHP pages

    - by Brian
    I installed lighttpd on CentOS 5.5 64-bit. Everything seems fine and running except I cannot get past 403 errors on both HTML and PHP pages. I have used CHMOD and CHOWN, changed ownership in the config file, done everything possible and have been stuck for 2 days. Appreciate any help, and here's hoping to a stupid error on my part. Here is the log file with debug options on: 2011-02-21 11:23:13: (request.c.304) fd: 7 request-len: 408 GET /index.html HTTP/1.1 Host: 10.0.1.8 User-Agent: Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.6; en-US; rv:1.9.2.13) Gecko/20101203 Firefox/3.6.13 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: en-us,en;q=0.5 Accept-Encoding: gzip,deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive: 115 Connection: keep-alive Cache-Control: max-age=0 2011-02-21 11:23:13: (response.c.241) run condition 2011-02-21 11:23:13: (response.c.300) -- splitting Request-URI 2011-02-21 11:23:13: (response.c.301) Request-URI : /index.html 2011-02-21 11:23:13: (response.c.302) URI-scheme : http 2011-02-21 11:23:13: (response.c.303) URI-authority: 10.0.1.8 2011-02-21 11:23:13: (response.c.304) URI-path : /index.html 2011-02-21 11:23:13: (response.c.305) URI-query : 2011-02-21 11:23:13: (response.c.349) -- sanatising URI 2011-02-21 11:23:13: (response.c.350) URI-path : /index.html 2011-02-21 11:23:13: (response.c.470) -- before doc_root 2011-02-21 11:23:13: (response.c.471) Doc-Root : /srv/www/lighttpd 2011-02-21 11:23:13: (response.c.472) Rel-Path : /index.html 2011-02-21 11:23:13: (response.c.473) Path : 2011-02-21 11:23:13: (response.c.521) -- after doc_root 2011-02-21 11:23:13: (response.c.522) Doc-Root : /srv/www/lighttpd 2011-02-21 11:23:13: (response.c.523) Rel-Path : /index.html 2011-02-21 11:23:13: (response.c.524) Path : /srv/www/lighttpd/index.html 2011-02-21 11:23:13: (response.c.541) -- logical -> physical 2011-02-21 11:23:13: (response.c.542) Doc-Root : /srv/www/lighttpd 2011-02-21 11:23:13: (response.c.543) Rel-Path : /index.html 2011-02-21 11:23:13: (response.c.544) Path : /srv/www/lighttpd/index.html 2011-02-21 11:23:13: (response.c.561) -- handling physical path 2011-02-21 11:23:13: (response.c.562) Path : /srv/www/lighttpd/index.html 2011-02-21 11:23:13: (response.c.608) -- access denied 2011-02-21 11:23:13: (response.c.609) Path : /srv/www/lighttpd/index.html 2011-02-21 11:23:13: (response.c.128) Response-Header: HTTP/1.1 403 Forbidden Content-Type: text/html Content-Length: 345 Date: Mon, 21 Feb 2011 16:23:13 GMT Server: lighttpd/1.4.28 Here is the directory listing. I used CHOWN to set to lighttpd:lighttpd [root@localhost lighttpd]# ls -al total 40 drwxrwxrwx 2 lighttpd lighttpd 4096 Feb 21 10:48 . drwxrwxrwx 3 lighttpd lighttpd 4096 Feb 21 10:57 .. -rwxrwxrwx 1 lighttpd lighttpd 10 Feb 20 08:32 index.html -rwxrwxrwx 1 lighttpd lighttpd 20 Feb 21 10:48 index.php -rwxrwxrwx 1 lighttpd lighttpd 20 Feb 21 10:39 info.php [root@localhost lighttpd]# Requested Commands: [root@localhost lighttpd]# ls -ld / /srv /srv/www drwxr-xr-x 22 root root 4096 Feb 21 04:39 / drwxrwxrwx 3 lighttpd lighttpd 4096 Feb 20 07:38 /srv drwxrwxrwx 3 lighttpd lighttpd 4096 Feb 21 10:57 /srv/www [root@localhost lighttpd]# ps auxZ | grep lighttpd root:system_r:httpd_t lighttpd 3842 0.0 0.2 48368 896 ? S 12:24 0:00 /usr/sbin/lighttpd -f /etc/lighttpd/lighttpd.conf root:system_r:unconfined_t:SystemLow-SystemHigh root 3845 0.0 0.2 61152 764 pts/0 R+ 12:24 0:00 grep lighttpd

    Read the article

  • Can't install new database in OpenLDAP 2.4 with BDB on Debian

    - by Timothy High
    I'm trying to install an openldap server (slapd) on a Debian EC2 instance. I have followed all the instructions I can find, and am using the recommended slapd-config approach to configuration. It all seems to be just fine, except that for some reason it can't create my new database. ldap.conf.bak (renamed to ensure it's not being used): ########## # Basics # ########## include /etc/ldap/schema/core.schema include /etc/ldap/schema/cosine.schema include /etc/ldap/schema/nis.schema include /etc/ldap/schema/inetorgperson.schema pidfile /var/run/slapd/slapd.pid argsfile /var/run/slapd/slapd.args loglevel none modulepath /usr/lib/ldap # modulepath /usr/local/libexec/openldap moduleload back_bdb.la database config #rootdn "cn=admin,cn=config" rootpw secret database bdb suffix "dc=example,dc=com" rootdn "cn=manager,dc=example,dc=com" rootpw secret directory /usr/local/var/openldap-data ######## # ACLs # ######## access to attrs=userPassword by anonymous auth by self write by * none access to * by self write by * none When I run slaptest on it, it complains that it couldn't find the id2entry.bdb file: root@server:/etc/ldap# slaptest -f ldap.conf.bak -F slapd.d bdb_db_open: database "dc=example,dc=com": db_open(/usr/local/var/openldap-data/id2entry.bdb) failed: No such file or directory (2). backend_startup_one (type=bdb, suffix="dc=example,dc=com"): bi_db_open failed! (2) slap_startup failed (test would succeed using the -u switch) Using the -u switch it works, of course. But that merely creates the configuration. It doesn't resolve the underlying problem: root@server:/etc/ldap# slaptest -f ldap.conf.bak -F slapd.d -u config file testing succeeded Looking in the database directory, the basic files are there (with right ownership, after a manual chown), but the dbd file wasn't created: root@server:/etc/ldap# ls -al /usr/local/var/openldap-data total 4328 drwxr-sr-x 2 openldap openldap 4096 Mar 1 15:23 . drwxr-sr-x 4 root staff 4096 Mar 1 13:50 .. -rw-r--r-- 1 openldap openldap 3080 Mar 1 14:35 DB_CONFIG -rw------- 1 openldap openldap 24576 Mar 1 15:23 __db.001 -rw------- 1 openldap openldap 843776 Mar 1 15:23 __db.002 -rw------- 1 openldap openldap 2629632 Mar 1 15:23 __db.003 -rw------- 1 openldap openldap 655360 Mar 1 14:35 __db.004 -rw------- 1 openldap openldap 4431872 Mar 1 15:23 __db.005 -rw------- 1 openldap openldap 32768 Mar 1 15:23 __db.006 -rw-r--r-- 1 openldap openldap 2048 Mar 1 15:23 alock (note that, because I'm doing this as root, I had to also change ownership of some of the files created by slaptest) Finally, I can start the slapd service, but it dies in the attempt (text from syslog): Mar 1 15:06:23 server slapd[21160]: @(#) $OpenLDAP: slapd 2.4.23 (Jun 15 2011 13:31:57) $#012#011@incagijs:/home/thijs/debian/p-u/openldap-2.4.23/debian/build/servers/slapd Mar 1 15:06:23 server slapd[21160]: config error processing olcDatabase={1}bdb,cn=config: Mar 1 15:06:23 server slapd[21160]: slapd stopped. Mar 1 15:06:23 server slapd[21160]: connections_destroy: nothing to destroy. I manually checked the olcDatabase={1}bdb file, and it looks fine to my amateur eye. All my specific configs are there. Unfortunately, syslog isn't reporting a specific error in this case (if it were a file permission error, it would say). I've tried uninstalling and reinstalling slapd, changing permissions, Googling my wits out, but I'm tapped out. Any OpenLDAP genius out there would be greatly appreciated!

    Read the article

  • Why do I see a large performance hit with DRBD?

    - by BHS
    I see a much larger performance hit with DRBD than their user manual says I should get. I'm using DRBD 8.3.7 (Fedora 13 RPMs). I've setup a DRBD test and measured throughput of disk and network without DRBD: dd if=/dev/zero of=/data.tmp bs=512M count=1 oflag=direct 536870912 bytes (537 MB) copied, 4.62985 s, 116 MB/s / is a logical volume on the disk I'm testing with, mounted without DRBD iperf: [ 4] 0.0-10.0 sec 1.10 GBytes 941 Mbits/sec According to Throughput overhead expectations, the bottleneck would be whichever is slower, the network or the disk and DRBD should have an overhead of 3%. In my case network and I/O seem to be pretty evenly matched. It sounds like I should be able to get around 100 MB/s. So, with the raw drbd device, I get dd if=/dev/zero of=/dev/drbd2 bs=512M count=1 oflag=direct 536870912 bytes (537 MB) copied, 6.61362 s, 81.2 MB/s which is slower than I would expect. Then, once I format the device with ext4, I get dd if=/dev/zero of=/mnt/data.tmp bs=512M count=1 oflag=direct 536870912 bytes (537 MB) copied, 9.60918 s, 55.9 MB/s This doesn't seem right. There must be some other factor playing into this that I'm not aware of. global_common.conf global { usage-count yes; } common { protocol C; } syncer { al-extents 1801; rate 33M; } data_mirror.res resource data_mirror { device /dev/drbd1; disk /dev/sdb1; meta-disk internal; on cluster1 { address 192.168.33.10:7789; } on cluster2 { address 192.168.33.12:7789; } } For the hardware I have two identical machines: 6 GB RAM Quad core AMD Phenom 3.2Ghz Motherboard SATA controller 7200 RPM 64MB cache 1TB WD drive The network is 1Gb connected via a switch. I know that a direct connection is recommended, but could it make this much of a difference? Edited I just tried monitoring the bandwidth used to try to see what's happening. I used ibmonitor and measured average bandwidth while I ran the dd test 10 times. I got: avg ~450Mbits writing to ext4 avg ~800Mbits writing to raw device It looks like with ext4, drbd is using about half the bandwidth it uses with the raw device so there's a bottleneck that is not the network.

    Read the article

  • Persuading openldap to work with SSL on Ubuntu with cn=config

    - by Roger
    I simply cannot get this (TLS connection to openldap) to work and would appreciate some assistance. I have a working openldap server on ubuntu 10.04 LTS, it is configured to use cn=config and most of the info I can find for TLS seems to use the older slapd.conf file :-( I've been largely following the instructions here https://help.ubuntu.com/10.04/serverguide/C/openldap-server.html plus stuff I've read here and elsewhere - which of course could be part of the problem as I don't totally understand all of this yet! I have created an ssl.ldif file as follows; dn:cn=config add: olcTLSCipherSuite olcTLSCipherSuite: TLSV1+RSA:!NULL add: olcTLSCRLCheck olcTLSCRLCheck: none add: olcTLSVerifyClient olcTLSVerifyClient: never add: olcTLSCACertificateFile olcTLSCACertificateFile: /etc/ssl/certs/ldap_cacert.pem add: olcTLSCertificateFile olcTLSCertificateFile: /etc/ssl/certs/my.domain.com_slapd_cert.pem add: olcTLSCertificateKeyFile olcTLSCertificateKeyFile: /etc/ssl/private/my.domain.com_slapd_key.pem and I import it using the following command line ldapmodify -x -D cn=admin,dc=mydomain,dc=com -W -f ssl.ldif I have edited /etc/default/slapd so that it has the following services line; SLAPD_SERVICES="ldap:/// ldapi:/// ldaps:///" And everytime I'm making a change, I'm restarting slapd with /etc/init.d/slapd restart The following command line to test out the non TLS connection works fine; ldapsearch -d 9 -D cn=admin,dc=mydomain,dc=com -w mypassword \ -b dc=mydomain,dc=com -H "ldap://mydomain.com" "cn=roger*" But when I switch to ldaps using this command line; ldapsearch -d 9 -D cn=admin,dc=mydomain,dc=com -w mypassword \ -b dc=mydomain,dc=com -H "ldaps://mydomain.com" "cn=roger*" This is what I get; ldap_url_parse_ext(ldaps://mydomain.com) ldap_create ldap_url_parse_ext(ldaps://mydomain.com:636/??base) ldap_sasl_bind ldap_send_initial_request ldap_new_connection 1 1 0 ldap_int_open_connection ldap_connect_to_host: TCP mydomain.com:636 ldap_new_socket: 3 ldap_prepare_socket: 3 ldap_connect_to_host: Trying 127.0.0.1:636 ldap_pvt_connect: fd: 3 tm: -1 async: 0 TLS: can't connect: A TLS packet with unexpected length was received.. ldap_err2string ldap_sasl_bind(SIMPLE): Can't contact LDAP server (-1) Now if I check netstat -al I can see; tcp 0 0 *:www *:* LISTEN tcp 0 0 *:ssh *:* LISTEN tcp 0 0 *:https *:* LISTEN tcp 0 0 *:ldaps *:* LISTEN tcp 0 0 *:ldap *:* LISTEN I'm not sure if this is significant as well ... I suspect it is; openssl s_client -connect mydomain.com:636 -showcerts CONNECTED(00000003) 916:error:140790E5:SSL routines:SSL23_WRITE:ssl handshake failure:s23_lib.c:188: I think I've made all my certificates etc OK and here are the results of some checks; If I do this; certtool -e --infile /etc/ssl/certs/ldap_cacert.pem I get Chain verification output: Verified. certtool -e --infile /etc/ssl/certs/mydomain.com_slapd_cert.pem Gives "certtool: the last certificate is not self signed" but it otherwise seems OK? Where have I gone wrong? Surely getting openldap to run securely on ubuntu should be easy and not require a degree in rocket science! Any ideas?

    Read the article

  • Python Django sites on Apache+mod_wsgi with nginx proxy: highly fluctuating performance

    - by Halfgaar
    I have an Ubuntu 10.04 box running several dozen Python Django sites using mod_wsgi (embedded mode; the faster mode, if properly configured). Performance highly fluctuates. Sometimes fast, sometimes several seconds delay. The smokeping graphs are al over the place. Recently, I also added an nginx proxy for the static content, in the hopes it would cure the highly fluctuating performance. But, even though it reduced the number of requests Apache has to process significantly, it didn't help with the main problem. When clicking around on websites while running htop, it can be seen that sometimes requests are almost instant, whereas sometimes it causes Apache to consume 100% CPU for a few seconds. I really don't understand where this fluctuation comes from. I have configured the mpm_worker for Apache like this: StartServers 1 MinSpareThreads 50 MaxSpareThreads 50 ThreadLimit 64 ThreadsPerChild 50 MaxClients 50 ServerLimit 1 MaxRequestsPerChild 0 MaxMemFree 2048 1 server with 50 threads, max 50 clients. Munin and apache2ctl -t both show a consistent presence of workers; they are not destroyed and created all the time. Yet, it behaves as such. This tells me that once a sub interpreter is created, it should remain in memory, yet it seems sites have to reload all the time. I also have a nginx+gunicorn box, which performs quite well. I would really like to know why Apache is so random. This is a virtual host config: <VirtualHost *:81> ServerAdmin [email protected] ServerName example.com DocumentRoot /srv/http/site/bla Alias /static/ /srv/http/site/static Alias /media/ /srv/http/site/media WSGIScriptAlias / /srv/http/site/passenger_wsgi.py <Directory /> AllowOverride None </Directory> <Directory /srv/http/site> Options -Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> Ubuntu 10.04 Apache 2.2.14 mod_wsgi 2.8 nginx 0.7.65 Edit: I've put some code in the settings.py file of a site that writes the date to a tmp file whenever it's loaded. I can now see that the site is not randomly reloaded all the time, so Apache must be keeping it in memory. So, that's good, except it doesn't bring me closer to an answer... Edit: I just found an error that might also be related to this: File "/usr/lib/python2.6/subprocess.py", line 633, in __init__ errread, errwrite) File "/usr/lib/python2.6/subprocess.py", line 1049, in _execute_child self.pid = os.fork() OSError: [Errno 12] Cannot allocate memory The server has 600 of 2000 MB free, which should be plenty. Is there a limit that is set on Apache or WSGI somewhere?

    Read the article

  • Why does copying an XML file from Windows Server 2008 R2 64-bit to Windows XP 32-bit change the file?

    - by Alex In Paris
    What I do: Copy an xml file (ctrl+C) on a Win Server 2008 machine. Minimize mstsc.exe (remote connection app). Paste the xml file on to my WinXP machine (ctrl+V). The result: All of the original contents are still present but another bit is appended at the end of it. E.g. the proper end of the file looks something like this: <ApplicationName>MyApp</ApplicationName> </ReceivePort> </ReceivePortCollection> <PartyCollection xsi:nil="true" /> </BindingInfo> But, after the copy, it looks like this: <ApplicationName>MyApp</ApplicationName> </ReceivePort> </ReceivePortCollection> <PartyCollection xsi:nil="true" /> </BindingInfo>al, PublicKeyToken=3zzf3xxxadyyy35" Type="1" TrackingOption="ServiceStartEnd MessageSendReceive PipelineEvents" Description="" /> <ReceivePipelineData xsi:nil="true" /> <SendPipeline xsi:nil="true" /> <SendPipelineData xsi:nil="true" /> <Enable>true</Enable> <ReceiveHandler Name="WCF_OracleDB_Rx" HostTrusted="false"> <TransportType Name="WCF OracleDB" Capabilities="779" Configuratio The extra bits it adds are things that come from earlier in the XML file. If I do the copy multiple times, the extra bits are always exactly the same but another XML file will add different lines. Extra information: If I copy/paste the file, as above, but first enclose it into a zip file I do not have the same problem. I.e. the file copies properly and without any extra surprises. If I do a copy/paste from a Windows Explorer window that's opened to the folder on the remote machine, I do not have the same behavior. I.e. the file copies properly and without any extra surprises. Question: Why does this happen?

    Read the article

  • TomCat starts, but does not load properly

    - by user37136
    Hey guys, I've been working on this for a day now and still don't know what's wrong. I am essentially building a second environment for our web and app server. I got apache to load up just fine, but tomcat is proving to be difficult. It appears to start and load just fine, but when it comes to loading our application, its just got stuck for 2-5 minutes and then shut down. Here is the log on the original machine where it works fine: 2010-02-12 11:52:40,506 INFO Web application servlet context is initializing... 2010-02-12 11:52:40,540 DEBUG Servlet context attribute added: select_jobType=[{1,Undefined}, {100,Completion}, {200,Plugging}, {300,R+M}, {400,Workover}, {500,Swab - tubing}, {600,Swab - fluid}] 2010-02-12 11:52:40,540 DEBUG Servlet context attribute added: select_jobTaskType=[{1,Undefined}, {100,Rod part}, {200,Tubing leak}, {300,Pump change}, {400,Stripping job}, {500,Long stroke}, {600,A/L optimization}] 2010-02-12 11:52:40,541 DEBUG Servlet context attribute added: select_wellType=[{1,Undefined}, {100,Rod pump}, {200,ESP}, {300,Injector}, {400,PC pump}, {500,Co-Rod}, {600,Flowing}, {700,Storage}] 2010-02-12 11:52:40,541 DEBUG Servlet context attribute added: select_assetType=[{1,Rig}, {100,Disabled rig}] 2010-02-12 11:52:40,542 DEBUG Servlet context attribute added: select_state=[{AL,Alabama}, {AK,Alaska}, {AZ,Arizona}, {AR,Arkansas}, {CA,California}, {CO,Colorado}, {CT,Connecticut}, {DE,Delaware}, {FL,Florida}, {GA,Georgia}, {HI,Hawaii}, {ID,Idaho}, {IL,Illinois}, {IN,Indiana}, {IA,Iowa}, {KS,Kansas}, {KY,Kentucky}, {LA,Louisiana}, {ME,Maine}, {MD,Maryland}, {MA,Massachusetts}, {MI,Michigan}, {MN,Minnesota}, {MS,Mississippi}, {MO,Missouri}, {MT,Montana}, {NE,Nebraska}, {NV,Nevada}, {NH,New Hampshire}, {NJ,New Jersey}, {NM,New Mexico}, {NY,New York}, {NC,North Carolina}, {ND,North Dakota}, {OH,Ohio}, {OK,Oklahoma}, {OR,Oregon}, {PA,Pennsylvania}, {RI,Rhode Island}, {SC,South Carolina}, {SD,South Dakota}, {TN,Tennessee}, {TX,Texas}, {UT,Utah}, {VT,Vermont}, {VA,Virginia}, {WA,Washington}, {WV,West Virginia}, {WI,Wisconsin}, {WY,Wyoming}, {ACO,Atlantic Coast Offshore}, {FOAK,Federal Offshore Alaska}, {NGOM,Northern Gulf of Mexico}, {PCO,Pacific Coastal Offshore}] 2010-02-12 11:52:40,542 INFO KeyviewContextMonitor.contextInitialized: Loaded drop-down lists:com/key/portal/web/common/lists.properties 2010-02-12 11:52:40,937 DEBUG Servlet context attribute added: org.apache.struts.action.SERVLET_MAPPING=*.do 2010-02-12 11:52:40,937 DEBUG Servlet context attribute added: org.apache.struts.action.ACTION_SERVLET=org.apache.struts.action.ActionServlet@155d578 2010-02-12 11:52:41,939 DEBUG Servlet context attribute added: org.apache.struts.action.MODULE=org.apache.struts.config.impl.ModuleConfigImpl@e08e9d 2010-02-12 11:52:41,962 DEBUG Servlet context attribute added: org.apache.struts.action.FORM_BEANS=org.apache.struts.action.ActionFormBeans@b31c3c 2010-02-12 11:52:41,967 DEBUG Servlet context attribute added: org.apache.struts.action.FORWARDS=org.apache.struts.action.ActionForwards@102c646 2010-02-12 11:52:41,973 DEBUG Servlet context attribute added: org.apache.struts.action.MAPPINGS=org.apache.struts.action.ActionMappings@127276a 2010-02-12 11:52:41,974 DEBUG Servlet context attribute added: org.apache.struts.action.MESSAGE=org.apache.struts.util.PropertyMessageResources@18cae13 2010-02-12 11:52:41,984 DEBUG Servlet context attribute added: org.apache.struts.action.PLUG_INS=[Lorg.apache.struts.action.PlugIn;@f875ae 2010-02-12 11:52:46,816 INFO Sucessfully loaded application properties com/key/core/properties/application On my second environment, it didn't execute the last line. I start tomcat with the exact same command line !/bin/ksh export JAVA_HOME=/app/java export CATALINA_HOME=/app/tomcat export CATALINA_BASE=/app/keyview/appserver CATALINA_OPTS=" -Xms128m -Xmx800m -Dapplication.props=com/key/core/properties/application -Dlog4j.configuration=com/key/core/log/log4j.xml -Djava.awt.headless=true -Dlog4j.debug" export CATALINA_OPTS ${CATALINA_HOME}/bin/startup.sh I bolded the line that I think are in error. Thanks

    Read the article

  • Linux not picking up new partition correctly on emc pseudo device

    - by James
    Hi We have a database server running oracle rac. We were recently running out of space on the main LUN that it is attached to. I created a new 100GB LUN and concatenated this onto the existing LUN creating a new MetaLUN. After some messing I managed to get linux to recognise the new space. I then created a new partition in on the pseudo device, to use the new space. Previously when I have done this on other system the next step is to create an ASM disk on the new partition and add this disk to the oracle disk group. This however fails. I am aware of various issues with ASM and powerpath, but I don't think this is the issue here. As on while investigating the issue I discovered that one of the underlying logical device is not reflecting the size change. See below; Powermt displays all of the underlying logical units [root@XXXXX~]# powermt display dev=emcpowerd Pseudo name=emcpowerd CLARiiON ID=CKM00091500009 [VFRAC2] Logical device ID=6006016030312200787502866C65DE11 [LUN 30] state=alive; policy=CLAROpt; priority=0; queued-IOs=0 Owner: default=SP A, current=SP A Array failover mode: 1 ============================================================================== ---------------- Host --------------- - Stor - -- I/O Path - -- Stats --- ### HW Path I/O Paths Interf. Mode State Q-IOs Errors ============================================================================== 3 qla2xxx sde SP A0 active alive 0 0 3 qla2xxx sdj SP B0 active alive 0 0 4 qla2xxx sdo SP A1 active alive 0 0 4 qla2xxx sdt SP B1 active alive 0 0 Fdisk on the pseudo device shows correct space. [root@XXXXX ~]# fdisk -l /dev/emcpowerd Disk /dev/emcpowerd: 429.4 GB, 429496729600 bytes 255 heads, 63 sectors/track, 52216 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/emcpowerd1 1 39162 314568733+ 83 Linux /dev/emcpowerd2 39163 52216 104856255 83 Linux fdisk on one of the logical units is wrong [root@XXXXX~]# fdisk -l /dev/sde Disk /dev/sde: 322.1 GB, 322122547200 bytes 255 heads, 63 sectors/track, 39162 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sde1 1 39162 314568733+ 83 Linux /dev/sde2 39163 52216 104856255 83 Linux fdisk on the rest of the units is fine [root@XXXXX ~]# fdisk -l /dev/sdj Disk /dev/sdj: 429.4 GB, 429496729600 bytes 255 heads, 63 sectors/track, 52216 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdj1 1 39162 314568733+ 83 Linux /dev/sdj2 39163 52216 104856255 83 Linux Also when I created the the partition linux did not create the any entries in the /dev directory for the second partition so I created these manually [root@XXXXX dev]# mknod sde2 b 8 66 [root@XXXXX dev]# ls -al sd[ejot]? brw-r----- 1 root disk 8, 65 Dec 29 14:20 sde1 brw-r--r-- 1 root disk 8, 66 Apr 8 20:31 sde2 brw-r----- 1 root disk 8, 145 Dec 29 14:19 sdj1 brw-r--r-- 1 root disk 8, 146 Apr 8 20:33 sdj2 brw-r----- 1 root disk 8, 225 Apr 6 23:12 sdo1 brw-r--r-- 1 root disk 8, 226 Apr 8 20:33 sdo2 brw-r----- 1 root disk 65, 49 Dec 29 14:19 sdt1 brw-r--r-- 1 root disk 65, 50 Apr 8 20:33 sdt2 This is a production server that we cannot easily reboot. Any ideas would be much appreciated. J

    Read the article

  • SMTP host name vs. domain in "From:" address vis-a-vis Email Deliverability

    - by Jared Duncan
    I'm trying to implement (or make sure that I'm correctly following) email sending best practices to improve deliverability, but the role of the smtp server's host name vs the domain name of the From: email address seems to be unclear, even after reading dozens of people's articles/input. Specifically, I understand that to satisfy the reverse DNS check, there must be a PTR record for the IP address of the sending machine that yields a domain name that matches the host name of the sending machine / SMTP server. Some say it needs to match the one given by the "hostname" command, most say it's the one provided with the HELO / EHLO statement, and this guy even says they MUST be the same (according to / enforced by what, I don't know; that's only a minor point of confusion, anyhow). First, what I can't find anywhere is whether or not the domain name of the From: email address needs to match the domain name of the SMTP server. So in my case, I have a VPS with linode. It primarily hosts a particular domain of mine, example.com, but I also sometimes do work on other projects: foo.com and bar.com. So what I'm wondering is if I can just leave the default linode PTR record (which resolves to abc.def.linode.com), make sure that abc.def.linode.com is what my mail server (qmail) is configured to say at HELO, and then proceed to use it to send out emails for example.com, foo.com, et al. If so, then I am confused by the advice given here, specifically (in a listing of bad case scenarios): No SPF record for the domain being used in the HELO command Why would THAT domain need an SPF record? And if it does, which domain should it provide whitelisting for: the HELO domain, or the domain of the From: email address (envelope sender)? Also, which domain would need to accept mail sent to [email protected]? If the domains must be the same, that would seem rather limiting to me, because then for every domain you wanted to send email from, you'd have to get another IP address for it. It would also compromise or ruin one's ability to do non-email sending things (e.g. wget) relatively anonymously. However, the upside--if this is the case--is that it would make for a far less confusing setup. I'm currently using the linode.com SMTP+PTR domain and example.com From: address combination without much of any deliverability issue, but my volume is very low and I'd like to know if someone out there has experience with larger volumes and has specifically tested the difference and/or has inside knowledge and/or has an authoritative answer (and source) for this particular question. I'm happy to clarify anything, let me know. Thanks in advance.

    Read the article

  • windows 2008 R2 TS printer security - can't take owership

    - by Ian
    I have a Windows 2008 R2 server with Terminal server role installed. I'm seeing a problem with an ordinary user who is member of local printer operators group on the server. If the user opens a cmd window using ‘run as administrator’ they can run printmanager.msc without needing to enter their password again. In printmanager they can change the ownership of redirected (easy print) printers without problems. If, from the same cmd window, they use subinacl to try and change the onwership of the queue to themselves they get access denied: >subinacl.exe /printer "_#MyPrinter (2 redirected)" /setowner="MyDom\MyUsr" Elapsed Time: 00 00:00:00 Done: 1, Modified 0, Failed 1, Syntax errors 0 Last Done : _#MyPrinter (2 redirected) Last Failed: _#MyPrinter (2 redirected) - OpenPrinter Error : 5 Access denied so, same context, same action but one works and one doesn't. Any ideas for this odd behaviour? I'm using subinacl x86 on an x64 server as I can't find anything more up to date. I've tried with icacls and others but couldn't get them to do anything with printers. EDIT: added after Gregs comments regarding setacl below If I log into the TS server as Testusr and open Admin Tools Printer Admin (as administrator) and then type mydomain\testusr and the testusr's password, then I can change the ownership of the printer queue and set testusr as the owner. However if I open cmd as administrator and, again, type mydomain\testusr and the users password when I try to change the ownership of my redirected printer I get the following: C:\>setacl -on "Bullzip PDF Printer (12 redireccionado)" -ot prn -actn setowner -ownr n:mydom\testusr WARNING: Privilege 'Back up files and directories' could not be enabled. SetACL's powers are restricted. WARNING: Privilege 'Restore files and directories' could not be enabled. SetACL's powers are restricted. INFORMATION: Processing ACL of: <Bullzip PDF Printer (12 redireccionado)> ERROR: Enabling the privilege SeTakeOwnershipPrivilege failed with: No todos los privilegios o grupos a los que se hace referencia son asignados al llamador. [meaning not all referenced privs or groups are assigned to the caller] SetACL finished with error(s): SetACL error message: A privilege could not be enabled maybe I'm getting something wrong but if the built in windows tool can do it with just membership of the 'print operators' group then setacl should be able to as well, no? However setacl seems to depend on other privileges, which in reality are not required to do this.

    Read the article

  • Sharing files between multiple sites using only desktop software

    - by perlyking
    Our organisation has three sites; a head office, where the master copies of company files are stored, plus two branch offices using only workstations and a NAS or two. Currently we're talking about <10GB. At the main office, we have no admin access to the file server, as this is entirely controlled by the larger institution where we are located. For the same reason, we have no VPN remote access to this network. Instead, we simply have access to a network share using over a Novell LAN. Question: how can we share files between offices in way that minimises latency, i.e. that gives us a mirror of the main network share at each site? (There is little likelihood of concurrent editing, and we can live with the odd file conflict now and again). Up to now branch office staff have had to use GotoMyPC-type solutions to remotely access files held at the main office. Or email. I was hoping to use Google Drive on a dedicated workstation at each office to sync the contents of the network share (head office) or NAS (branch offices) via the cloud, but at my last attempt (29 Jun '12), the Google Drive installer would not allow me to designate the remote network share as the "target" folder. (I chose Google Drive over Drobbox et al. as we already use GMail for corporate mail) The next idea was to use a designated workstation at head office to mirror the network share to a local drive, then use Google Drive to push that to the cloud. This seems a step too far. Nor do I have any good ideas about how to achieve this network/local mirroring, as we can't, for example, install the rsync daemon on the server. I do not want to use Google Drive locally on each workstation as this will inconvenience users, and more importantly, move files off the backed-up, well-maintained (UPS, RAID etc) network share at head office. Our budget is only in the £100's. Should we perhaps just ditch the head office server and use something like JungleDisk? At least this presents the user with what appears to be a mapped drive.

    Read the article

  • .htaccess ignored, SPECIFIC to EC2 - not the usual suspects

    - by tedneigerux
    I run 8-10 EC2 based web servers, so my experience is many hours, but is limited to CentOS; specifically Amazon's distribution. I'm installing Apache using yum, so therefore getting Amazon's default compilation of Apache. I want to implement canonical redirects from non-www (bare/root) domain to www.domain.com for SEO using mod_rewrite BUT MY .htaccess FILE IS CONSISTENTLY IGNORED. My troubleshooting steps (outlined below) lead me to believe it's something specific to Amazon's build of Apache. TEST CASE Launch a EC2 Instance, e.g. Amazon Linux AMI 2013.03.1 SSH to the Server Run the commands: $ sudo yum install httpd $ sudo apachectl start $ sudo vi /etc/httpd/conf/httpd.conf $ sudo apachectl restart $ sudo vi /var/www/html/.htaccess In httpd.conf I changed the following, in the DOCROOT section / scope: AllowOverride All In .htaccess, added: (EDIT, I added RewriteEngine On later) RewriteCond %{HTTP_HOST} ^domain\.com$ [NC] RewriteRule ^/(.*) http://www.domain.com/$1 [R=301,L] Permissions on .htaccess are correct, AFAI can tell: $ ls -al /var/www/html/.htaccess -rwxrwxr-x 1 git apache 142 Jun 18 22:58 /var/www/html/.htaccess Other info: $ httpd -v Server version: Apache/2.2.24 (Unix) Server built: May 20 2013 21:12:45 $ httpd -M Loaded Modules: core_module (static) ... rewrite_module (shared) ... version_module (shared) Syntax OK EXPECTED BEHAVIOR $ curl -I domain.com HTTP/1.1 301 Moved Permanently Date: Wed, 19 Jun 2013 12:36:22 GMT Server: Apache/2.2.24 (Amazon) Location: http://www.domain.com/ Connection: close Content-Type: text/html; charset=UTF-8 ACTUAL BEHAVIOR $ curl -I domain.com HTTP/1.1 200 OK Date: Wed, 19 Jun 2013 12:34:10 GMT Server: Apache/2.2.24 (Amazon) Connection: close Content-Type: text/html; charset=UTF-8 TROUBLESHOOTING STEPS In .htaccess, added: BLAH BLAH BLAH ERROR RewriteCond %{HTTP_HOST} ^domain\.com$ [NC] RewriteRule ^/(.*) http://www.domain.com/$1 [R=301,L] My server threw an error 500, so I knew the .htaccess file was processed. As expected, it created an Error log entry: [Wed Jun 19 02:24:19 2013] [alert] [client XXX.XXX.XXX.XXX] /var/www/html/.htaccess: Invalid command 'BLAH BLAH BLAH ERROR', perhaps misspelled or defined by a module not included in the server configuration Since I have root access on the server, I then tried moving my rewrite rule directly to the httpd.conf file. THIS WORKED. This tells us several important things are working. $ curl -I domain.com HTTP/1.1 301 Moved Permanently Date: Wed, 19 Jun 2013 12:36:22 GMT Server: Apache/2.2.24 (Amazon) Location: http://www.domain.com/ Connection: close Content-Type: text/html; charset=UTF-8 HOWEVER, it is bothering me that it didn't work in the .htaccess file. And I have other use cases where I need it to work in .htaccess (e.g. an EC2 instance with named virtual hosts). Thank you in advance for your help.

    Read the article

  • Passing variables to shopping cart with Javascript

    - by albatross
    This question is an extension of this one: http://stackoverflow.com/questions/2359238/calculate-order-price-by-date-selection-value I'm trying to make a conference registration page based off the previous page, which passes the variables(name, email, price) to my organization's outdated shopping cart using javascript. I'm also using Seminar Registration by CSSTricks (http://css-tricks.com/examples/SeminarRegTutorial/) Currently, my proceed to payment button produces an 'element is undefined' error on line 298(same thing on unresolved previous question, linked above^): switch (document.Information.amount.value) { Any help would be greatly appreciated. I'm at my wits end with this. Here is the page: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en"> <head> <meta http-equiv="Content-Type" content="text/html; charset=UTF-8" /> <title>Seminar Registration Form with jQuery</title> <link rel="stylesheet" type="text/css" href="css/style.css" media="screen" /> <script src="js/jquery-1.2.6.js" type="text/javascript" charset="utf-8"></script> <script src="js/form-fun.jquery.js" type="text/javascript" charset="utf-8"></script> <!--[if IE]> <style type="text/css"> legend { position: relative; top: -30px; } fieldset { margin: 30px 10px 0 0; } </style> <script type="text/javascript"> $(function(){ $("#step_2 legend").css({ opacity: 0.5 }); $("#step_3 legend").css({ opacity: 0.5 }); }); </script> <![endif]--> </head> <body> <div id="page-wrap"> <h1>Conference <span>Registration</span></h1> <form action="#" method="post"> <fieldset id="step_1"> <legend>Step 1</legend> <label for="num_attendees"> How cool are you? </label> <select id="amount"> <option id="0" value="0">Please Choose</option> <option id="prof" value="90.00">Professional</option> <option id="grad" value="55.00">Graduate Student</option> </select> <br /> <div id="attendee_1_wrap" class="name_wrap push"> <h3>Who are you?</h3> <p> <label for="FirstName"> First Name: </label> <input type="text" id="FirstName" class="name_input"></input> </p> <p> <label for="LastName"> Last Name: </label> <input type="text" id="LastName" class="name_input"></input> </p> <p> <label for="OfficialTitle"> Official Title: </label> <input type="text" id="OfficialTitle" class="name_input"></input> </p> <h3>How do we find you?</h3> <label for="email">Email: </label> <input id="email" name="email" class="required email" /> </p> <p> <label for="Address">Street Address: </label><input name="Address" id="Address" type="text" size="20" maxlength="75" /> </p> <p> <label for="City">City: </label><input name="City" id="City" /> </p> <p> <label for="State">State: </label><select name="State" id="State"> <option selected value="IL">IL</option> <option value="AL">AL</option> <option value="AK">AK</option> <option value="AZ">AZ</option> <option value="AR">AR</option> <option value="CA">CA</option> <option value="CO">CO</option> <option value="CT">CT</option> <option value="DE">DE</option> <option value="DC">DC</option> <option value="FL">FL</option> <option value="GA">GA</option> <option value="HI">HI</option> <option value="ID">ID</option> <option value="IN">IN</option> <option value="IA">IA</option> <option value="KS">KS</option> <option value="KY">KY</option> <option value="LA">LA</option> <option value="ME">ME</option> <option value="MD">MD</option> <option value="MA">MA</option> <option value="MI">MI</option> <option value="MN">MN</option> <option value="MS">MS</option> <option value="MO">MO</option> <option value="MT">MT</option> <option value="NE">NE</option> <option value="NV">NV</option> <option value="NH">NH</option> <option value="NJ">NJ</option> <option value="NM">NM</option> <option value="NY">NY</option> <option value="NC">NC</option> <option value="ND">ND</option> <option value="OH">OH</option> <option value="OK">OK</option> <option value="OR">OR</option> <option value="PA">PA</option> <option value="RI">RI</option> <option value="SC">SC</option> <option value="SD">SD</option> <option value="TN">TN</option> <option value="TX">TX</option> <option value="UT">UT</option> <option value="VT">VT</option> <option value="VA">VA</option> <option value="WA">WA</option> <option value="WV">WV</option> <option value="WI">WI</option> <option value="WY">WY</option> </select> </p> <p> <label for="Zip">Zip Code: </label><input name="Zip" id="Zip" type="text" value="" size="5" maxlength="10" /> </p> <p> <label for="Phone">Telephone: </label><input name="Phone" id="Phone" type="text" value="" size="10" maxlength="13" /> </p> </div> </fieldset> <fieldset id="step_2"> <legend>Step 2</legend> <p> Do you work in Higher Education? </p> <input type="radio" id="company_name_toggle_on" name="company_name_toggle_group"></input> <label for="company_name_toggle_on">Yes</label> &emsp; <input type="radio" id="company_name_toggle_off" name="company_name_toggle_group"></input> <label for="company_name_toggle_off">No</label> <div id="company_name_wrap"> <label for="company_name"> Which School? </label> <input type="text" id="company_name"></input> </div> <div class="push"> <p> Will anyone in your group require special accommodations? </p> <input type="radio" id="special_accommodations_toggle_on" name="special_accommodations_toggle"></input> <label for="special_accommodations_toggle_on">Yes</label> &emsp; <input type="radio" id="special_accommodations_toggle_off" name="special_accommodations_toggle"></input> <label for="special_accommodations_toggle_off">No</label> </div> <div id="special_accommodations_wrap"> <label for="special_accomodations_text"> Please explain below: </label> <textarea rows="10" cols="10" id="special_accomodations_text"></textarea> </div> </fieldset> <fieldset id="step_3"> <legend>Step 3</legend> <label for="rock"> Are you ready to rock? </label> <input type="checkbox" id="rock"></input> <p> <INPUT onclick="javascript:PaymentButtonClick()" type=button value="Proceed to payment" name=PaymentButton> <img src="images/visa1.gif" /> <img src="images/mastercard1.gif" /> </p> </fieldset> </form> </div> <FORM name="emailForm" action="mailform.asp" method=post"> <INPUT type="hidden" value="Conference Registration" name="mf_subject"> <INPUT type="hidden" value="Yes" name="mf_email_results"> <INPUT type="hidden" title="" style="BACKGROUND-COLOR: #ffffa0" size="20" name="num_attendees"> <INPUT type="hidden" title="" style="BACKGROUND-COLOR: #ffffa0" size="17" name="FirstName"> <INPUT type="hidden" title="" style="BACKGROUND-COLOR: #ffffa0" size="22" name="LastName"> <INPUT type="hidden" title="" style="BACKGROUND-COLOR: #ffffff" size="64" name="OfficialTitle"> <INPUT type="hidden" title="" style="BACKGROUND-COLOR: #ffffff" size="40" name="email"> <INPUT type="hidden" title="" style="BACKGROUND-COLOR: #ffffff" size="48" name="Address"> <INPUT type="hidden" title="" style="BACKGROUND-COLOR: #ffffa0" size="17" name="City"> <INPUT type="hidden" title="" style="BACKGROUND-COLOR: #ffffa0" size="17" name="State"> <INPUT type="hidden" title="" style="BACKGROUND-COLOR: #ffffa0" size="17" name="Zip"> <INPUT type="hidden" title="" style="BACKGROUND-COLOR: #ffffa0" size="17" name="Phone"> <INPUT type="hidden" title="" style="BACKGROUND-COLOR: #ffffa0" size="17" name="company_name"> <INPUT type="hidden" title="" style="BACKGROUND-COLOR: #ffffff" size="20" name="special_accomodations_text"> <INPUT type="hidden" value="[email protected]" name="mf_from"> <INPUT type="hidden" value="[email protected]" name="mf_to"> </FORM> <FORM name="addform" action="https://webcluster.niu.edu/CreditCard/servlet/Shopping_Cart_Add_Item_Servlet" method="post"> <INPUT type="hidden" value="orient" name="Dept_ID"> <INPUT type="hidden" value="Orientation" name="Product_Name"> <INPUT type="hidden" value="z000000" name="Product_Code"> <INPUT type="hidden" value="" name="amount"> <INPUT type="hidden" value="/orientation/index.shtml" name="return_link"> <INPUT type="hidden" value="http://www.niu.edu" name="return_server"> <INPUT type="hidden" value="1" name="quantity"> <INPUT type="hidden" value="0" name="tax"> <INPUT type="hidden" value="0" name="ship"> <INPUT type="hidden" value="DQ83225" name="sale_id"> <INPUT type="hidden" value="XXXXXX" name="sale_acct"> </FORM> <SCRIPT language="Javascript"> function PaymentButtonClick() { switch (document.Information.amount.value) { case 'prof': document.Information.amount.value = 90.00; break; case 'grad': document.Information.amount.value = 55.00; break; } document.addform.Product_Name.value = document.Information.FirstName.value + ","+ document.Information.LastName.value+","+ document.Information.OfficialTitle.value+","+ document.Information.email.name+","+","+ document.Information.Address.value+ "," + document.Information.City.value+ "," + document.Information.State.value+ "," + document.Information.Zip.value+ "," + document.Information.Phone.value+ "," + document.Information.company_name.value+ "," + document.Information.special_accomodations_text.value; document.addform.Product_Code.value = document.Information.LastName.value; if ((document.Information.UCheck.checked==true) && (document.Information.altDate1.value != "") && (document.Information.altDate1.value != "x")) { if (document.Information.StudentLastName.value != "" || document.Information.StudentFirstName.value != "" || document.Information.StudentID.value != "" ) { document.addform.submit(); } else { alert("Please enter missing information"); } } } </SCRIPT> </body> </html>

    Read the article

  • How do I ensure that a JPanel Shrinks when the parent frame is resized?

    - by dah
    I have a basic notes panel that I'm looking to shrink the width of when the parent jframe is resized but it isn't happening. I'm using nested gridbaglayouts. package com.protocase.notes.views; import com.protocase.notes.controller.NotesController; import com.protocase.notes.model.Subject; import com.protocase.notes.model.Note; import com.protocase.notes.model.database.PMSNotesAdapter; import java.awt.Color; import java.awt.GridBagConstraints; import java.awt.GridBagLayout; import javax.swing.BorderFactory; import javax.swing.JButton; import javax.swing.JLabel; import javax.swing.JPanel; import javax.swing.JScrollPane; /** * @author DavidH */ public class NotesViewer extends JPanel { // <editor-fold defaultstate="collapsed" desc="Attributes"> private Subject subject; private NotesController controller; //</editor-fold> // <editor-fold defaultstate="collapsed" desc="Getters N' Setters"> /** * Gets back the current subject. * @return */ public Subject getSubject() { return subject; } public NotesController getController() { return controller; } public void setController(NotesController controller) { this.controller = controller; } /** * Should clear the panel of the current subject and load the details for * the other object. * @param subject */ public void setSubject(Subject subject) { this.subject = subject; } //</editor-fold> // <editor-fold defaultstate="collapsed" desc="Constructor"> /** * -- Sets up a note viewer with a subject and a controller. Likely this * would be the constructor used if you were passing off from another * NoteViewer or something else that used a notes adapter or controller. * @param subject * @param controller */ public NotesViewer(Subject subject, NotesController controller) { this.subject = subject; this.controller = controller; initComponents(); } /** * -- Sets up a note view with a subject and creates a new controller. This * would be the constructor typically chosen if choosing notes was * infrequent and only one or two notes needs to be displayed. * @param subject */ public NotesViewer(Subject subject) { this(subject, new NotesController(new PMSNotesAdapter())); } /** * -- Sets up a note view without a subject and creates a new controller. * This would be for a note viewer without any notes, perhaps populating * as you choose values in another form. * @param subject */ public NotesViewer() { this(null); } //</editor-fold> // <editor-fold defaultstate="collapsed" desc="initComponents()"> /** * Sets up the view for the NotesViewer */ private void initComponents() { // -- Make a new panel for the header JPanel panel = new JPanel(); panel.setLayout(new GridBagLayout()); GridBagConstraints c = new GridBagConstraints(); c.gridx = 0; c.fill = GridBagConstraints.HORIZONTAL; c.gridy = 0; c.weightx = .5; //c.anchor = GridBagConstraints.NORTHWEST; JLabel label = new JLabel("Viewing Notes for [Subject]"); label.setAlignmentX(JLabel.LEFT_ALIGNMENT); label.setBorder(BorderFactory.createLineBorder(Color.YELLOW)); panel.add(label); JButton newNoteButton = new JButton("New"); c = new GridBagConstraints(); // c.fill = GridBagConstraints.HORIZONTAL; c.gridx = 1; c.gridy = 0; c.weightx = .5; c.anchor = GridBagConstraints.EAST; panel.add(newNoteButton, c); // -- NotePanels c = new GridBagConstraints(); c.fill = GridBagConstraints.HORIZONTAL; c.weightx = 1; c.weighty = 1; c.gridx = 0; c.gridwidth = 2; int y = 1; for (Note n : subject.getNotes()) { c.gridy = y++; panel.add(new NotesPanel(n, controller), c); } this.setLayout(new GridBagLayout()); GridBagConstraints pc = new GridBagConstraints(); pc.gridx = 0; pc.gridy = 0; pc.weightx = 1; pc.weighty = 1; pc.fill = GridBagConstraints.BOTH; panel.setBackground(Color.blue); JScrollPane scroll = new JScrollPane(); scroll.setViewportView(panel); //scroll.setHorizontalScrollBarPolicy(JScrollPane.HORIZONTAL_SCROLLBAR_NEVER); this.add(scroll, pc); //this.add(panel, pc); // -- Add it all to the layout } //</editor-fold> // <editor-fold defaultstate="collapsed" desc="private methods"> //</editor-fold> } package com.protocase.notes.views; import com.protocase.notes.controller.NotesController; import com.protocase.notes.model.Note; import java.awt.CardLayout; import java.awt.Color; import java.awt.Component; import java.awt.Dimension; import java.awt.GridBagConstraints; import java.awt.GridBagLayout; import java.awt.event.ActionEvent; import java.awt.event.ActionListener; import java.text.DateFormat; import java.text.SimpleDateFormat; import javax.swing.BorderFactory; import javax.swing.JButton; import javax.swing.JLabel; import javax.swing.JPanel; import javax.swing.JScrollPane; import javax.swing.JTextArea; import javax.swing.JTextField; import javax.swing.border.BevelBorder; import javax.swing.border.Border; import javax.swing.border.MatteBorder; /** * @author dah01 */ public class NotesPanel extends JPanel { // <editor-fold defaultstate="collapsed" desc="Attributes"> private Note note; private NotesController controller; private CardLayout cardLayout; private JTextArea viewTextArea; private JTextArea editTextArea; //</editor-fold> // <editor-fold defaultstate="collapsed" desc="Getters N' Setters"> public NotesController getController() { return controller; } public void setController(NotesController controller) { this.controller = controller; } public Note getNote() { return note; } public void setNote(Note note) { this.note = note; } //</editor-fold> // <editor-fold defaultstate="collapsed" desc="Constructor"> /** * Sets up a note panel that shows everything about the note. * @param note */ public NotesPanel(Note note, NotesController controller) { this.note = note; cardLayout = new CardLayout(); this.setLayout(cardLayout); // -- Setup the layout manager. this.setBackground(new Color(199, 187, 192)); this.setBorder(new BevelBorder(BevelBorder.RAISED)); // -- ViewPanel this.add("ViewPanel", initViewPanel()); this.add("EditPanel", initEditPanel()); } //</editor-fold> // <editor-fold defaultstate="collapsed" desc="EditPanel"> private JPanel initEditPanel() { JPanel editPanel = new JPanel(); editPanel.setLayout(new GridBagLayout()); GridBagConstraints c = new GridBagConstraints(); c.fill = GridBagConstraints.HORIZONTAL; c.gridy = 0; c.weightx = 1; c.weighty = 0.3; editPanel.add(initCreatorLabel(), c); c.gridy++; editPanel.add(initEditTextScroll(), c); c.gridy++; c.anchor = GridBagConstraints.WEST; c.fill = GridBagConstraints.NONE; editPanel.add(initEditorLabel(), c); c.gridx++; c.anchor = GridBagConstraints.EAST; editPanel.add(initSaveButton(), c); return editPanel; } private JScrollPane initEditTextScroll() { this.editTextArea = new JTextArea(note.getContents()); editTextArea.setLineWrap(true); editTextArea.setWrapStyleWord(true); JScrollPane scrollPane = new JScrollPane(editTextArea); scrollPane.setAlignmentX(JScrollPane.LEFT_ALIGNMENT); Border b = scrollPane.getViewportBorder(); MatteBorder mb = BorderFactory.createMatteBorder(2, 2, 2, 2, Color.BLUE); scrollPane.setBorder(mb); return scrollPane; } private JButton initSaveButton() { final CardLayout l = this.cardLayout; final JPanel p = this; final NotesController c = this.controller; final Note n = this.note; final JTextArea noteText = this.viewTextArea; final JTextArea textToSubmit = this.editTextArea; ActionListener al = new ActionListener() { @Override public void actionPerformed(ActionEvent e) { //controller.saveNote(n); noteText.setText(textToSubmit.getText()); l.next(p); } }; JButton saveButton = new JButton("Save"); saveButton.addActionListener(al); saveButton.setPreferredSize(new Dimension(62, 26)); return saveButton; } //</editor-fold> // <editor-fold defaultstate="collapsed" desc="ViewPanel"> private JPanel initViewPanel() { JPanel viewPanel = new JPanel(); viewPanel.setLayout(new GridBagLayout()); GridBagConstraints c = new GridBagConstraints(); c.fill = GridBagConstraints.HORIZONTAL ; c.gridy = 0; c.weightx = 1; c.weighty = 0.3; viewPanel.add(initCreatorLabel(), c); c.gridy++; viewPanel.add(this.initNoteTextArea(), c); c.fill = GridBagConstraints.NONE; c.anchor = GridBagConstraints.WEST; c.gridy++; viewPanel.add(initEditorLabel(), c); c.gridx++; c.anchor = GridBagConstraints.EAST; viewPanel.add(initEditButton(), c); return viewPanel; } private JLabel initCreatorLabel() { DateFormat formatter = new SimpleDateFormat("yyyy-MM-dd"); if (note != null) { String noteBy = "Note by " + note.getCreator(); String noteCreated = formatter.format(note.getDateCreated()); JLabel creatorLabel = new JLabel(noteBy + " @ " + noteCreated); creatorLabel.setAlignmentX(JLabel.LEFT_ALIGNMENT); return creatorLabel; } else { System.out.println("NOTE IS NULL"); return null; } } private JScrollPane initNoteTextArea() { // -- Setup the notes area. this.viewTextArea = new JTextArea(note.getContents()); viewTextArea.setEditable(false); viewTextArea.setLineWrap(true); viewTextArea.setWrapStyleWord(true); JScrollPane scrollPane = new JScrollPane(viewTextArea); scrollPane.setAlignmentX(JScrollPane.LEFT_ALIGNMENT); return scrollPane; } private JLabel initEditorLabel() { // -- Setup the edited by label. JLabel editorLabel = new JLabel(" -- Last edited by " + note.getLastEdited() + " at " + note.getDateModified()); editorLabel.setAlignmentX(Component.LEFT_ALIGNMENT); return editorLabel; } private JButton initEditButton() { final CardLayout l = this.cardLayout; final JPanel p = this; ActionListener ar = new ActionListener() { @Override public void actionPerformed(ActionEvent e) { l.next(p); } }; JButton editButton = new JButton("Edit"); editButton.setPreferredSize(new Dimension(62,26)); editButton.addActionListener(ar); return editButton; } //</editor-fold> // <editor-fold defaultstate="collapsed" desc="Grow Width When Resized"> @Override public Dimension getPreferredSize() { int fw = this.getParent().getSize().width; int fh = super.getPreferredSize().height; return new Dimension(fw,fh); } //</editor-fold> }

    Read the article

  • WCF REST on .Net 4.0

    - by AngelEyes
    A simple and straight forward article taken from: http://christopherdeweese.com/blog2/post/drop-the-soap-wcf-rest-and-pretty-uris-in-net-4 Drop the Soap: WCF, REST, and Pretty URIs in .NET 4 Years ago I was working in libraries when the Web 2.0 revolution began.  One of the things that caught my attention about early start-ups using the AJAX/REST/Web 2.0 model was how nice the URIs were for their applications.  Those were my first impressions of REST; pretty URIs.  Turns out there is a little more to it than that. REST is an architectural style that focuses on resources and structured ways to access those resources via the web.  REST evolved as an “anti-SOAP” movement, driven by developers who did not want to deal with all the complexity SOAP introduces (which is al lot when you don’t have frameworks hiding it all).  One of the biggest benefits to REST is that browsers can talk to rest services directly because REST works using URIs, QueryStrings, Cookies, SSL, and all those HTTP verbs that we don’t have to think about anymore. If you are familiar with ASP.NET MVC then you have been exposed to rest at some level.  MVC is relies heavily on routing to generate consistent and clean URIs.  REST for WCF gives you the same type of feel for your services.  Let’s dive in. WCF REST in .NET 3.5 SP1 and .NET 4 This post will cover WCF REST in .NET 4 which drew heavily from the REST Starter Kit and community feedback.  There is basic REST support in .NET 3.5 SP1 and you can also grab the REST Starter Kit to enable some of the features you’ll find in .NET 4. This post will cover REST in .NET 4 and Visual Studio 2010. Getting Started To get started we’ll create a basic WCF Rest Service Application using the new on-line templates option in VS 2010: When you first install a template you are prompted with this dialog: Dude Where’s my .Svc File? The WCF REST template shows us the new way we can simply build services.  Before we talk about what’s there, let’s look at what is not there: The .Svc File An Interface Contract Dozens of lines of configuration that you have to change to make your service work REST in .NET 4 is greatly simplified and leverages the Web Routing capabilities used in ASP.NET MVC and other parts of the web frameworks.  With REST in .NET 4 you use a global.asax to set the route to your service using the new ServiceRoute class.  From there, the WCF runtime handles dispatching service calls to the methods based on the Uri Templates. global.asax using System; using System.ServiceModel.Activation; using System.Web; using System.Web.Routing; namespace Blog.WcfRest.TimeService {     public class Global : HttpApplication     {         void Application_Start(object sender, EventArgs e)         {             RegisterRoutes();         }         private static void RegisterRoutes()         {             RouteTable.Routes.Add(new ServiceRoute("TimeService",                 new WebServiceHostFactory(), typeof(TimeService)));         }     } } The web.config contains some new structures to support a configuration free deployment.  Note that this is the default config generated with the template.  I did not make any changes to web.config. web.config <?xml version="1.0"?> <configuration>   <system.web>     <compilation debug="true" targetFramework="4.0" />   </system.web>   <system.webServer>     <modules runAllManagedModulesForAllRequests="true">       <add name="UrlRoutingModule" type="System.Web.Routing.UrlRoutingModule,            System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />     </modules>   </system.webServer>   <system.serviceModel>     <serviceHostingEnvironment aspNetCompatibilityEnabled="true"/>     <standardEndpoints>       <webHttpEndpoint>         <!--             Configure the WCF REST service base address via the global.asax.cs file and the default endpoint             via the attributes on the <standardEndpoint> element below         -->         <standardEndpoint name="" helpEnabled="true" automaticFormatSelectionEnabled="true"/>       </webHttpEndpoint>     </standardEndpoints>   </system.serviceModel> </configuration> Building the Time Service We’ll create a simple “TimeService” that will return the current time.  Let’s start with the following code: using System; using System.ServiceModel; using System.ServiceModel.Activation; using System.ServiceModel.Web; namespace Blog.WcfRest.TimeService {     [ServiceContract]     [AspNetCompatibilityRequirements(RequirementsMode = AspNetCompatibilityRequirementsMode.Allowed)]     [ServiceBehavior(InstanceContextMode = InstanceContextMode.PerCall)]     public class TimeService     {         [WebGet(UriTemplate = "CurrentTime")]         public string CurrentTime()         {             return DateTime.Now.ToString();         }     } } The endpoint for this service will be http://[machinename]:[port]/TimeService.  To get the current time http://[machinename]:[port]/TimeService/CurrentTime will do the trick. The Results Are In Remember That Route In global.asax? Turns out it is pretty important.  When you set the route name, that defines the resource name starting after the host portion of the Uri. Help Pages in WCF 4 Another feature that came from the starter kit are the help pages.  To access the help pages simply append Help to the end of the service’s base Uri. Dropping the Soap Having dabbled with REST in the past and after using Soap for the last few years, the WCF 4 REST support is certainly refreshing.  I’m currently working on some REST implementations in .NET 3.5 and VS 2008 and am looking forward to working on REST in .NET 4 and VS 2010.

    Read the article

  • Your thoughts on Best Practices for Scientific Computing?

    - by John Smith
    A recent paper by Wilson et al (2014) pointed out 24 Best Practices for scientific programming. It's worth to have a look. I would like to hear opinions about these points from experienced programmers in scientific data analysis. Do you think these advices are helpful and practical? Or are they good only in an ideal world? Wilson G, Aruliah DA, Brown CT, Chue Hong NP, Davis M, Guy RT, Haddock SHD, Huff KD, Mitchell IM, Plumbley MD, Waugh B, White EP, Wilson P (2014) Best Practices for Scientific Computing. PLoS Biol 12:e1001745. http://www.plosbiology.org/article/info%3Adoi%2F10.1371%2Fjournal.pbio.1001745 Box 1. Summary of Best Practices Write programs for people, not computers. (a) A program should not require its readers to hold more than a handful of facts in memory at once. (b) Make names consistent, distinctive, and meaningful. (c) Make code style and formatting consistent. Let the computer do the work. (a) Make the computer repeat tasks. (b) Save recent commands in a file for re-use. (c) Use a build tool to automate workflows. Make incremental changes. (a) Work in small steps with frequent feedback and course correction. (b) Use a version control system. (c) Put everything that has been created manually in version control. Don’t repeat yourself (or others). (a) Every piece of data must have a single authoritative representation in the system. (b) Modularize code rather than copying and pasting. (c) Re-use code instead of rewriting it. Plan for mistakes. (a) Add assertions to programs to check their operation. (b) Use an off-the-shelf unit testing library. (c) Turn bugs into test cases. (d) Use a symbolic debugger. Optimize software only after it works correctly. (a) Use a profiler to identify bottlenecks. (b) Write code in the highest-level language possible. Document design and purpose, not mechanics. (a) Document interfaces and reasons, not implementations. (b) Refactor code in preference to explaining how it works. (c) Embed the documentation for a piece of software in that software. Collaborate. (a) Use pre-merge code reviews. (b) Use pair programming when bringing someone new up to speed and when tackling particularly tricky problems. (c) Use an issue tracking tool. I'm relatively new to serious programming for scientific data analysis. When I tried to write code for pilot analyses of some of my data last year, I encountered tremendous amount of bugs both in my code and data. Bugs and errors had been around me all the time, but this time it was somewhat overwhelming. I managed to crunch the numbers at last, but I thought I couldn't put up with this mess any longer. Some actions must be taken. Without a sophisticated guide like the article above, I started to adopt "defensive style" of programming since then. A book titled "The Art of Readable Code" helped me a lot. I deployed meticulous input validations or assertions for every function, renamed a lot of variables and functions for better readability, and extracted many subroutines as reusable functions. Recently, I introduced Git and SourceTree for version control. At the moment, because my co-workers are much more reluctant about these issues, the collaboration practices (8a,b,c) have not been introduced. Actually, as the authors admitted, because all of these practices take some amount of time and effort to introduce, it may be generally hard to persuade your reluctant collaborators to comply them. I think I'm asking your opinions because I still suffer from many bugs despite all my effort on many of these practices. Bug fix may be, or should be, faster than before, but I couldn't really measure the improvement. Moreover, much of my time has been invested on defence, meaning that I haven't actually done much data analysis (offence) these days. Where is the point I should stop at in terms of productivity? I've already deployed: 1a,b,c, 2a, 3a,b,c, 4b,c, 5a,d, 6a,b, 7a,7b I'm about to have a go at: 5b,c Not yet: 2b,c, 4a, 7c, 8a,b,c (I could not really see the advantage of using GNU make (2c) for my purpose. Could anyone tell me how it helps my work with MATLAB?)

    Read the article

  • 3 Trends for SMBs around Social, Mobile, and Sensor

    - by Socially_Aware_Enterprise
    While I often am talking to big companies or discussing enterprise solutions. There are times when individuals ask me about Small or Medium sized business trends.  Interestingly,  the Enterprise Social, Mobile, and Sensor initiatives I regularly discuss are in fact related to even the Mom and Pop storefront. The eco-system of new service players in the Social-Mobile-Sensor space generally emerge developing partnerships with enterprises as they develop and bring economy to scale to their services for the larger market. And of course Oracle has an entire division dedicated for delivering products and support to help emerging companies compete without the need to open an industrial strength credit line.. So here are some trends that we are helping large enterprises to deploy today, but small and medium businesses should be able to take advantage of by the end of this year and starting into 2015. 1) The typical small business is generally "Localized". But the ability to be "Hyper-Localized" will come as location based services become ubiquitous. Many small businesses have one or several storefronts and theirs are typically within a single regional economic footprint. While the internet provides global reach, it will be the businesses that invest in social, mobile and local that will win in the end.  Of course I am a huge SoMoLo evangelist. The SMBs' content and targeting with platforms for Geo-Fencing, Geo-Conquesting and Path-Matching to HHI are all going to be accessible to them, if not for Mobile Apps, then via Mobile messaging in Social Networks that offer it.. Expect to be able to target FaceBook messaging not by city, but by store or mall… This makes being able to be "Hyper-Local" even more important. And with new proximity services coming online more than ever before, SMBs will operate and service customers with pinpoint accuracy right down to where they stand in an aisle. Geo-Conquesting will be huge for small players to place ads when customers pass through competitors regions. Car Dealers are doing this now.. But also of course iBeacons are now very cheap and getting easier to put in retail stores. The ability for sales to happen anywhere in the store via a mobile phone or tablet is huge, as it will give the small shop the flexibility to not have to "Guard the Register" as more or most transactions will be digital. Thus, M-Commerce and T-Commerce will change the job of cashier dramatically.. 2) Intra-Brand Advocacy, the idea now is that rather than just depend on your trusty social media manager and his team, you are going to push more and more individuals with expertise inside the organization to help manage, reach-out, and utilize social channels to manage the incoming questions and answers customers need. While for years CRM was the tool of the enterprise, today CRMs enable this now "Salesforce et al" capability to trickle throughout the company. This gives greater pressure to organize roles, but also flatten out the organization. Internal collaboration around topics and customer needs is going to be the key for SMBs to finally get serious about customer experiences. Their customers are online and in social networks. This includes not just B2C SMBs but also B2B companies as well. Don't believe me? To find the players just use hashtag #SocialSelling and you will see… 3) The Visual Networks will begin to move from Content Aggregators to Content Collaboration platforms, which means Pinterest, Instagram, Vine, & others will begin to move to add more features brands want, first marketing platforms, rather than unique brand partnerships as they do today, but this will open ways for SMBs to engage with clear brand messaging and metrics. Eventually providing more "Collaboration" between Brand and Consumer.. Don't think for a minute Facebook bought Oculus Rift so you could see your timeline in 3-D. The Social Networks I advise customers to invest in are ones that are audio and visual intrinsically. Players from SoundCloud to Pinterest are deploying ways for brands to harness their interactive visual or audio based social networks to sell ad units aka brand messaging. While the Social Media revolution is going on, the emphasis was on the social, today it more and more about the media in social, that enterprises soon small and medium businesses will be connected to. 

    Read the article

  • Managing Your First SharePoint Project or Team

    - by Mark Rackley
    (*editor’s note* If you have proper SharePoint Training, know the difference between a site and a site collection, and have the utmost respect for the knowledge of your SharePoint team skip this blog and go directly to meetdux.com, do not pass go, do not collect $200… otherwise, please proceed) Dear Mr. or Mrs. I-know-nothing-about-SharePoint-but-hey,-I-have-manager-in-my-title-so-I’ll-tell-you-how-to-your-job, Thank you so much for joining the Acme corporation. We appreciate your eagerness and willingness to jump in and help us accomplish all of our goals here at acme (these roadrunner rockets don’t make themselves). You may have noticed that we have this thing called SharePoint lying around and we have invested some time in money to make it not a complete piece of garbage. So, I thought I’d give you some pointers to help make your stay here enjoyable and productive. Yeah… you don’t really know SharePoint Just because you had a mysite at your last organization or had a SharePoint 2003 team site does NOT mean you comprehend the vastness that is SharePoint. You don’t know what’s going on behind the scenes. You don’t know what should and should not be done. No, we CAN’T just query the SQL database directly. Yes, it really does take that long. No, we can’t do that out-of-the-box. Your experience doesn’t mean as much as you think it means… Yes, I’m aware that you co-created the internet with Al Gore and have been managing projects since I was blowing up GI Joe figures with firecrackers, however SharePoint is not like anything you have worked with before from a management perspective. Please don’t tell us the proper way to do our job or tell us how “you” would do it, and PLEASE don’t utter the words “I used to do some .NET development so let me know if you get stuck and need some guidance.” It MAY be possible for a incredible project manager to manage a SharePoint project and not understand the technology, but if you force your ideas on us or treat us like we don’t really know what we’re doing then you will prove yourself to NOT be one of those types. Oh no you didn’t… Please don’t tell us how you can bring in a group of guys of Kazakhstan to do the project for $20/hr. There are many companies out there who can do some really crappy SharePoint work and we don’t want to be stuck maintaining their junk. Do you know what it means to deploy a solution? Neither do some of those companies out there. However, there are are few AWESOME consulting firms out there but $150/hr is cheap for these guys. Believe me, it’s worth it though. You get what you pay for! Show us some respect We truly do appreciate and value your opinion and experience, but when we tell you something is different in SharePoint don’t be condescending and dismiss OUR experience and opinions. We have spent a lot of time and energy learning a very complicated technology that can open up a world of possibilities when used properly. We just want to make sure it is used properly. It’s not the same as .NET development. It’s not like a regular web application. There’s more going on behind the scenes than you can possibly fathom. Have a little faith in us please and listen when we talk. You may actually learn a thing or two. Take some time to learn the technology There is hope… you don’t have to be totally worthless. Take some time to learn SharePoint. Learn what it is and what it can do. Invest some time in learning our SharePoint environment. What’s our logical architecture and taxonomy? What governance do we have in place? If you just thought “huh?” then yes, I’m talking to you. Sincerely, Your SharePoint Team (This rant is not pointed at any particular organization or person. If you think it’s about you, you are wrong. This is just a general rant based upon things people have told me and things I’ve seen. If you don’t think it applies to you, please move on. If you think you might be guilty of handling your SharePoint team the wrong way, then just please listen, learn, and have a little faith in your team. You all have the same goal in mind. Also, take the time to learn something about SharePoint, you will all be less frustrated with each other.)

    Read the article

  • Access Control Service v2: Registering Web Identities in your Applications [concepts]

    - by Your DisplayName here!
    ACS v2 support two fundamental types of client identities– I like to call them “enterprise identities” (WS-*) and “web identities” (Google, LiveID, OpenId in general…). I also see two different “mind sets” when it comes to application design using the above identity types: Enterprise identities – often the fact that a client can present a token from a trusted identity provider means he is a legitimate user of the application. Trust relationships and authorization details have been negotiated out of band (often on paper). Web identities – the fact that a user can authenticate with Google et al does not necessarily mean he is a legitimate (or registered) user of an application. Typically additional steps are necessary (like filling out a form, email confirmation etc). Sometimes also a mixture of both approaches exist, for the sake of this post, I will focus on the web identity case. I got a number of questions how to implement the web identity scenario and after some conversations it turns out it is the old authentication vs. authorization problem that gets in the way. Many people use the IsAuthenticated property on IIdentity to make security decisions in their applications (or deny user=”?” in ASP.NET terms). That’s a very natural thing to do, because authentication was done inside the application and we knew exactly when the IsAuthenticated condition is true. Been there, done that. Guilty ;) The fundamental difference between these “old style” apps and federation is, that authentication is not done by the application anymore. It is done by a third party service, and in the case of web identity providers, in services that are not under our control (nor do we have a formal business relationship with these providers). Now the issue is, when you switch to ACS, and someone with a Google account authenticates, indeed IsAuthenticated is true – because that’s what he is! This does not mean, that he is also authorized to use the application. It just proves he was able to authenticate with Google. Now this obviously leads to confusion. How can we solve that? Easy answer: We have to deal with authentication and authorization separately. Job done ;) For many application types I see this general approach: Application uses ACS for authentication (maybe both enterprise and web identities, we focus on web identities but you could easily have a dual approach here) Application offers to authenticate (or sign in) via web identity accounts like LiveID, Google, Facebook etc. Application also maintains a database of its “own” users. Typically you want to store additional information about the user In such an application type it is important to have a unique identifier for your users (think the primary key of your user database). What would that be? Most web identity provider (and all the standard ACS v2 supported ones) emit a NameIdentifier claim. This is a stable ID for the client (scoped to the relying party – more on that later). Furthermore ACS emits a claims identifying the identity provider (like the original issuer concept in WIF). When you combine these two values together, you can be sure to have a unique identifier for the user, e.g.: Facebook-134952459903700\799880347 You can now check on incoming calls, if the user is already registered and if yes, swap the ACS claims with claims coming from your user database. One claims would maybe be a role like “Registered User” which can then be easily used to do authorization checks in the application. The WIF claims authentication manager is a perfect place to do the claims transformation. If the user is not registered, show a register form. Maybe you can use some claims from the identity provider to pre-fill form fields. (see here where I show how to use the Facebook API to fetch additional user properties). After successful registration (which may include other mechanisms like a confirmation email), flip the bit in your database to make the web identity a registered user. This is all very theoretical. In the next post I will show some code and provide a download link for the complete sample. More on NameIdentifier Identity providers “guarantee” that the name identifier for a given user in your application will always be the same. But different applications (in the case of ACS – different ACS namespaces) will see different name identifiers. This is by design to protect the privacy of users because identical name identifiers could be used to create “profiles” of some sort for that user. In technical terms they create the name identifier approximately like this: name identifier = Hash((Provider Internal User ID) + (Relying Party Address)) Why is this important to know? Well – when you change the name of your ACS namespace, the name identifiers will change as well and you will will lose your “connection” to your existing users. Oh an btw – never use any other claims (like email address or name) to form a unique ID – these can often be changed by users.

    Read the article

  • "The specified type was not recognized" exception when trying to invoke a webservice call

    - by fretje
    I'm trying to call a third party webservice using WSE 3.0 as a client in Visual Studio 2005. The call works fine and I can see that I get a good response (I have tracing enabled), but apparently the xml parser chokes over it. I always get an InvalidOperationException: There is en error in the XML document. with an InnerException: The specified type was not recognized: name='Map', namespace='http://xml.apache.org/xml-soap', at <bevoegdheid xmlns=''>. This is the relevant part of the response: <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ns1="http://xml.apache.org/xml-soap" xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/" xmlns:ns2="https://acceptatie.cartalk.nl/Soap/Apk" SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"> <SOAP-ENV:Body> <SOAP-ENV:opvragenKeurmeesterGegevensResponse> <opvragenKeurmeesterGegevensReturn xsi:type="ns2:Backend_Apk_Result_OpvragenKeurmeesterGegevens"> <naam xsi:type="xsd:string">A name</naam> ... <bevoegdheid SOAP-ENC:arrayType="ns1:Map[2]" xsi:type="SOAP-ENC:Array"> <item xsi:type="ns1:Map"> <item> <key xsi:type="xsd:string">soortBevoegdheid</key> <value xsi:type="xsd:string">AL</value> </item> ... </item> <item> ... </item> </bevoegdheid> <meldingSoort xsi:nil="true" /> <meldingNummer xsi:nil="true" /> <melding xsi:nil="true" /> </opvragenKeurmeesterGegevensReturn> </SOAP-ENV:opvragenKeurmeesterGegevensResponse> </SOAP-ENV:Body> </SOAP-ENV:Envelope> And this is how that "bevoegdheid" is defined in the wsdl: <xsd:element name="bevoegdheid" type="soap-enc:Array" /> There is no mention of a "Map" type anywhere in the wsdl. I have been googling around for this, but the only kind of answer I've found is something along the lines of The service uses rpc/encoded format which is harder to get interoperability with. If you can change the server to document/literal it is better. But as this is a third party service (which is already used by other clients), this is no option for us. Any other suggestions? How can I get the xml parser to recognize that "Map" type?

    Read the article

  • build error with boost spirit grammar (boost 1.43 and g++ 4.4.1)

    - by lurscher
    I'm having issues getting a small spirit/qi grammar to compile. The build stack trace is fugly enought to not make any sense to me (despite some assertion_failed i could notice in there but that didn't brought much information) the input grammar header: inputGrammar.h #include <boost/config/warning_disable.hpp> #include <boost/spirit/include/qi.hpp> #include <boost/spirit/include/phoenix_core.hpp> #include <boost/spirit/include/phoenix_operator.hpp> #include <boost/spirit/include/phoenix_fusion.hpp> #include <boost/spirit/include/phoenix_stl.hpp> #include <boost/fusion/include/adapt_struct.hpp> #include <boost/variant/recursive_variant.hpp> #include <boost/foreach.hpp> #include <iostream> #include <fstream> #include <string> #include <vector> namespace sp = boost::spirit; namespace qi = boost::spirit::qi; using namespace boost::spirit::ascii; //using namespace boost::spirit::arg_names; namespace fusion = boost::fusion; namespace phoenix = boost::phoenix; using phoenix::at_c; using phoenix::push_back; template< typename Iterator , typename ExpressionAST > struct InputGrammar : qi::grammar<Iterator, ExpressionAST(), space_type> { InputGrammar() : InputGrammar::base_type( block ) { tag = sp::lexeme[+(alpha) [sp::_val += sp::_1]];//[+(char_ - '<') [_val += _1]]; block = sp::lit("block") [ at_c<0>(sp::_val) = sp::_1] >> "(" >> *instruction[ push_back( at_c<1>(sp::_val) , sp::_1 ) ] >> ")"; command = tag [ at_c<0>(sp::_val) = sp::_1] >> "(" >> *instruction [ push_back( at_c<1>(sp::_val) , sp::_1 )] >> ")"; instruction = ( command | tag ) [sp::_val = sp::_1]; } qi::rule< Iterator , std::string() , space_type > tag; qi::rule< Iterator , ExpressionAST() , space_type > block; qi::rule< Iterator , ExpressionAST() , space_type > function_def; qi::rule< Iterator , ExpressionAST() , space_type > command; qi::rule< Iterator , ExpressionAST() , space_type > instruction; }; the test build program: i seems the build fails at qi::phrase_parse, i am using boost 1.43 and g++ 4.4.1 #include <iostream> #include <string> #include <vector> using namespace std; //my grammar #include <InputGrammar.h> struct MockExpressionNode { std::string name; std::vector< MockExpressionNode > operands; typedef std::vector< MockExpressionNode >::iterator iterator; typedef std::vector< MockExpressionNode >::const_iterator const_iterator; iterator begin() { return operands.begin(); } const_iterator begin() const { return operands.begin(); } iterator end() { return operands.end(); } const_iterator end() const { return operands.end(); } bool is_leaf() const { return ( operands.begin() == operands.end() ); } }; BOOST_FUSION_ADAPT_STRUCT( MockExpressionNode, (std::string, name) (std::vector<MockExpressionNode>, operands) ) int const tabsize = 4; void tab(int indent) { for (int i = 0; i < indent; ++i) std::cout << ' '; } template< typename ExpressionNode > struct ExpressionNodePrinter { ExpressionNodePrinter(int indent = 0) : indent(indent) { } void operator()(ExpressionNode const& node) const { cout << " tag: " << node.name << endl; for (int i=0 ; i < node.operands.size() ; i++ ) { tab( indent ); cout << " arg "<<i<<": "; ExpressionNodePrinter(indent + 2)( node.operands[i]); cout << endl; } } int indent; }; int test() { MockExpressionNode root; InputGrammar< string::const_iterator , MockExpressionNode > g(); std::string litA = "litA"; std::string litB = "litB"; std::string litC = "litC"; std::string litD = "litD"; std::string litE = "litE"; std::string litF = "litF"; std::string source = litA+"( "+litB+" ,"+litC+" , "+ litD+" ( "+litE+", "+litF+" ) "+ " )"; string::const_iterator iter = source.begin(); string::const_iterator end = source.end(); bool r = qi::phrase_parse( iter , end , g , root , space ); ExpressionNodePrinter< MockExpressionNode > np; np( root ); }; int main() { test(); } finally, the build error is the following: /usr/bin/make -f nbproject/Makefile-linux_amd64_devel.mk SUBPROJECTS= .build-conf make[1]: se ingresa al directorio `/home/mineq/NetBeansProjects/InputParserTests' /usr/bin/make -f nbproject/Makefile-linux_amd64_devel.mk dist/linux_amd64_devel/GNU-Linux-x86/vpuinputparsertests make[2]: se ingresa al directorio `/home/mineq/NetBeansProjects/InputParserTests' mkdir -p build/linux_amd64_devel/GNU-Linux-x86 rm -f build/linux_amd64_devel/GNU-Linux-x86/tests_main.o.d g++ `llvm-config --cxxflags` `pkg-config --cflags unittest-cpp` `pkg-config --cflags boost-1.43` `pkg-config --cflags boost-coroutines` -c -g -I../InputParser -MMD -MP -MF build/linux_amd64_devel/GNU-Linux-x86/tests_main.o.d -o build/linux_amd64_devel/GNU-Linux-x86/tests_main.o tests_main.cpp from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/auto.hpp:16, from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi.hpp:15, from /home/mineq/third_party/boost_1_43_0/boost/spirit/include/qi.hpp:16, from ../InputParser/InputGrammar.h:12, from tests_main.cpp:14: /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/parse.hpp: In function ‘bool boost::spirit::qi::phrase_parse(Iterator&, Iterator, const Expr&, const Skipper&, boost::spirit::qi::skip_flag::enum_type, Attr&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), Skipper = MockExpressionNode, Attr = const boost::proto::exprns_::expr<boost::proto::tag::terminal, boost::proto::argsns_::term<boost::spirit::tag::char_code<boost::spirit::tag::space, boost::spirit::char_encoding::ascii> >, 0l>]’: In file included from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/detail/parse_auto.hpp:14, /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/parse.hpp:125: instantiated from ‘bool boost::spirit::qi::phrase_parse(Iterator&, Iterator, const Expr&, const Skipper&, Attr&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), Skipper = MockExpressionNode, Attr = const boost::spirit::ascii::space_type]’ tests_main.cpp:206: instantiated from here /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/parse.hpp:99: error: no matching function for call to ‘assertion_failed(mpl_::failed************ (boost::spirit::qi::phrase_parse(Iterator&, Iterator, const Expr&, const Skipper&, boost::spirit::qi::skip_flag::enum_type, Attr&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), Skipper = MockExpressionNode, Attr = const boost::proto::exprns_::expr<boost::proto::tag::terminal, boost::proto::argsns_::term<boost::spirit::tag::char_code<boost::spirit::tag::space, boost::spirit::char_encoding::ascii> >, 0l>]::error_invalid_expression::************)(InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode> (*)()))’ /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/parse.hpp:125: instantiated from ‘bool boost::spirit::qi::phrase_parse(Iterator&, Iterator, const Expr&, const Skipper&, Attr&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), Skipper = MockExpressionNode, Attr = const boost::spirit::ascii::space_type]’ tests_main.cpp:206: instantiated from here /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/parse.hpp:100: error: no matching function for call to ‘assertion_failed(mpl_::failed************ (boost::spirit::qi::phrase_parse(Iterator&, Iterator, const Expr&, const Skipper&, boost::spirit::qi::skip_flag::enum_type, Attr&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), Skipper = MockExpressionNode, Attr = const boost::proto::exprns_::expr<boost::proto::tag::terminal, boost::proto::argsns_::term<boost::spirit::tag::char_code<boost::spirit::tag::space, boost::spirit::char_encoding::ascii> >, 0l>]::error_invalid_expression::************)(MockExpressionNode))’ from /home/mineq/third_party/boost_1_43_0/boost/proto/proto.hpp:12, from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/support/meta_compiler.hpp:17, from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/meta_compiler.hpp:14, from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/action/action.hpp:14, from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/action.hpp:14, from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi.hpp:14, from /home/mineq/third_party/boost_1_43_0/boost/spirit/include/qi.hpp:16, from ../InputParser/InputGrammar.h:12, from tests_main.cpp:14: /home/mineq/third_party/boost_1_43_0/boost/proto/detail/expr0.hpp: At global scope: /home/mineq/third_party/boost_1_43_0/boost/proto/proto_fwd.hpp: In instantiation of ‘boost::proto::exprns_::expr<boost::proto::tag::terminal, boost::proto::argsns_::term<InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>()>, 0l>’: In file included from /home/mineq/third_party/boost_1_43_0/boost/proto/core.hpp:13, /home/mineq/third_party/boost_1_43_0/boost/utility/enable_if.hpp:59: instantiated from ‘boost::disable_if<boost::proto::result_of::is_expr<boost::proto::exprns_::expr<boost::proto::tag::terminal, boost::proto::argsns_::term<InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>()>, 0l>, void>, void>’ /home/mineq/third_party/boost_1_43_0/boost/spirit/home/support/meta_compiler.hpp:200: instantiated from ‘boost::spirit::result_of::compile<boost::spirit::qi::domain, InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), boost::fusion::unused_type, void>’ /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/parse.hpp:107: instantiated from ‘bool boost::spirit::qi::phrase_parse(Iterator&, Iterator, const Expr&, const Skipper&, boost::spirit::qi::skip_flag::enum_type, Attr&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), Skipper = MockExpressionNode, Attr = const boost::proto::exprns_::expr<boost::proto::tag::terminal, boost::proto::argsns_::term<boost::spirit::tag::char_code<boost::spirit::tag::space, boost::spirit::char_encoding::ascii> >, 0l>]’ /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/parse.hpp:125: instantiated from ‘bool boost::spirit::qi::phrase_parse(Iterator&, Iterator, const Expr&, const Skipper&, Attr&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), Skipper = MockExpressionNode, Attr = const boost::spirit::ascii::space_type]’ tests_main.cpp:206: instantiated from here /home/mineq/third_party/boost_1_43_0/boost/proto/detail/expr0.hpp:64: error: field ‘boost::proto::exprns_::expr<boost::proto::tag::terminal, boost::proto::argsns_::term<InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>()>, 0l>::child0’ invalidly declared function type from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/auto.hpp:16, from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi.hpp:15, from /home/mineq/third_party/boost_1_43_0/boost/spirit/include/qi.hpp:16, from ../InputParser/InputGrammar.h:12, from tests_main.cpp:14: /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/parse.hpp: In function ‘bool boost::spirit::qi::phrase_parse(Iterator&, Iterator, const Expr&, const Skipper&, boost::spirit::qi::skip_flag::enum_type, Attr&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), Skipper = MockExpressionNode, Attr = const boost::proto::exprns_::expr<boost::proto::tag::terminal, boost::proto::argsns_::term<boost::spirit::tag::char_code<boost::spirit::tag::space, boost::spirit::char_encoding::ascii> >, 0l>]’: In file included from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/detail/parse_auto.hpp:14, /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/parse.hpp:125: instantiated from ‘bool boost::spirit::qi::phrase_parse(Iterator&, Iterator, const Expr&, const Skipper&, Attr&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), Skipper = MockExpressionNode, Attr = const boost::spirit::ascii::space_type]’ tests_main.cpp:206: instantiated from here /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/parse.hpp:107: error: request for member ‘parse’ in ‘boost::spirit::compile [with Domain = boost::spirit::qi::domain, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>()](((InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode> (&)())((InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode> (*)())expr)))’, which is of non-class type ‘InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>()’ from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/auto.hpp:15, from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi.hpp:15, from /home/mineq/third_party/boost_1_43_0/boost/spirit/include/qi.hpp:16, from ../InputParser/InputGrammar.h:12, from tests_main.cpp:14: /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/skip_over.hpp: In function ‘void boost::spirit::qi::skip_over(Iterator&, const Iterator&, const T&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, T = boost::spirit::qi::phrase_parse(Iterator&, Iterator, const Expr&, const Skipper&, boost::spirit::qi::skip_flag::enum_type, Attr&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), Skipper = MockExpressionNode, Attr = const boost::proto::exprns_::expr<boost::proto::tag::terminal, boost::proto::argsns_::term<boost::spirit::tag::char_code<boost::spirit::tag::space, boost::spirit::char_encoding::ascii> >, 0l>]::skipper_type]’: In file included from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/auto/auto.hpp:19, /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/parse.hpp:112: instantiated from ‘bool boost::spirit::qi::phrase_parse(Iterator&, Iterator, const Expr&, const Skipper&, boost::spirit::qi::skip_flag::enum_type, Attr&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), Skipper = MockExpressionNode, Attr = const boost::proto::exprns_::expr<boost::proto::tag::terminal, boost::proto::argsns_::term<boost::spirit::tag::char_code<boost::spirit::tag::space, boost::spirit::char_encoding::ascii> >, 0l>]’ /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/parse.hpp:125: instantiated from ‘bool boost::spirit::qi::phrase_parse(Iterator&, Iterator, const Expr&, const Skipper&, Attr&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), Skipper = MockExpressionNode, Attr = const boost::spirit::ascii::space_type]’ tests_main.cpp:206: instantiated from here /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/skip_over.hpp:27: error: ‘const struct MockExpressionNode’ has no member named ‘parse’ make[2]: *** [build/linux_amd64_devel/GNU-Linux-x86/tests_main.o] Error 1 make[2]: se sale del directorio `/home/mineq/NetBeansProjects/InputParserTests' make[1]: *** [.build-conf] Error 2 make[1]: se sale del directorio `/home/mineq/NetBeansProjects/InputParserTests' make: *** [.build-impl] Error 2 BUILD FAILED (exit value 2, total time: 1m 48s)

    Read the article

  • Using FFMPEG to reliably convert videos to mp4 for iphone/ipod and flash players

    - by Jake Stevenson
    I need to convert videos for use in both a flash player and the iphone/ipod touch. I'm using the following batch script with ffmpeg: @echo off ffmpeg.exe -i %1 -s qvga -acodec libfaac -ar 22050 -ab 128k -vcodec libx264 -threads 0 -f ipod %2 This always outputs an mp4 file, and I can always play it on my PC. The videos also seem to play fine on my iphone 3GS. But with some input files it won't work for older iphone versions (3G and iPod touch). Here's the ffmpeg output from one such file: D:\ffmpeg>encode.bat d:\temp\recording.flv d:\temp\out.m4v FFmpeg version SVN-r18709, Copyright (c) 2000-2009 Fabrice Bellard, et al. configuration: --enable-memalign-hack --prefix=/mingw --cross-prefix=i686-ming w32- --cc=ccache-i686-mingw32-gcc --target-os=mingw32 --arch=i686 --cpu=i686 --e nable-avisynth --enable-gpl --enable-zlib --enable-bzlib --enable-libgsm --enabl e-libfaac --enable-libfaad --enable-pthreads --enable-libvorbis --enable-libtheo ra --enable-libspeex --enable-libmp3lame --enable-libopenjpeg --enable-libxvid - -enable-libschroedinger --enable-libx264 libavutil 50. 3. 0 / 50. 3. 0 libavcodec 52.27. 0 / 52.27. 0 libavformat 52.32. 0 / 52.32. 0 libavdevice 52. 2. 0 / 52. 2. 0 libswscale 0. 7. 1 / 0. 7. 1 built on Apr 28 2009 04:04:42, gcc: 4.2.4 [flv @ 0x187d650]skipping flv packet: type 18, size 164, flags 0 Input #0, flv, from 'd:\temp\recording.flv': Duration: 00:00:07.17, start: 0.001000, bitrate: N/A Stream #0.0: Video: flv, yuv420p, 320x240, 1k tbr, 1k tbn, 1k tbc Stream #0.1: Audio: nellymoser, 44100 Hz, mono, s16 [libx264 @ 0x13518b0]using cpu capabilities: MMX2 SSE2Fast SSSE3 FastShuffle SSE 4.2 [libx264 @ 0x13518b0]profile Baseline, level 4.2 Output #0, ipod, to 'd:\temp\out.m4v': Stream #0.0: Video: libx264, yuv420p, 320x240, q=2-31, 200 kb/s, 1k tbn, 1k tbc Stream #0.1: Audio: libfaac, 22050 Hz, mono, s16, 128 kb/s Stream mapping: Stream #0.0 -> #0.0 Stream #0.1 -> #0.1 Press [q] to stop encoding frame= 90 fps= 0 q=-1.0 Lsize= 128kB time=6.87 bitrate= 152.4kbits/s video:92kB audio:32kB global headers:1kB muxing overhead 2.620892% [libx264 @ 0x13518b0]slice I:8 Avg QP:29.62 size: 7047 [libx264 @ 0x13518b0]slice P:82 Avg QP:30.83 size: 467 [libx264 @ 0x13518b0]mb I I16..4: 17.9% 0.0% 82.1% [libx264 @ 0x13518b0]mb P I16..4: 0.6% 0.0% 0.0% P16..4: 23.1% 0.0% 0.0% 0.0% 0.0% skip:76.3% [libx264 @ 0x13518b0]final ratefactor: 57.50 [libx264 @ 0x13518b0]SSIM Mean Y:0.9544735 [libx264 @ 0x13518b0]kb/s:8412.6 My suspicion is that it has something to do with the audio encoding. If so, does anyone know how to force it to reencode the audio to the proper format? Any other ideas?

    Read the article

  • Exception when deploying a JSR 286 portlet into WebLogic+WebCenter 11g

    - by Rambaldi
    I get the following exception when deploying a JSR 286 portlet into Oracle WebLogic Server 11g (to deploy it later in Oracle WebCenter 11g): <19-ene-2010 13H32' CET> <Error> <oracle.portlet.server.containerimpl.PortletApplicationImpl> <BEA-000000> <Error al procesar el archivo "/WEB-INF/portlet.xml" en la lÝnea 6 columna 68. org.xml.sax.SAXParseException: cvc-elt.1: Cannot find the declaration of element 'portlet-app' The error message is in spanish. It means: "Error processing the file "/WEB-INF/portlet.xml at line 6 column 68" The portlet.xml of my portlet seems to be correct and I've deployed it in other portal servers. So I don't understand the error message. This is the portlet.xml of my portlet (eclipse XML validator said it was a valid XML) <?xml version="1.0" encoding="UTF-8"?> <portlet-app version="2.0" xmlns="http://java.sun.com/xml/ns/portlet/portlet-app_2_0.xsd" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/portlet/portlet-app_2_0.xsd http://java.sun.com/xml/ns/portlet/portlet-app_2_0.xsd" xmlns:dnd="http://www.denodo.com/widget/portlet/portletjsr286"> <portlet> <description>Test Inter Portlet Communication (JSR286)</description> <portlet-name>Test IPC</portlet-name> <display-name>Test IPC</display-name> <portlet-class>com.denodo.ipc.TestIPCPortlet</portlet-class> <supports> <mime-type>text/html</mime-type> <portlet-mode>VIEW</portlet-mode> </supports> <supported-locale>en</supported-locale> <resource-bundle>PortletMessages</resource-bundle> <portlet-info> <title>Test IPC</title> <short-title>Test IPC</short-title> <keywords>Test IPC,Denodo</keywords> </portlet-info> </portlet> </portlet-app> How do I deploy my portlet I convert my portlet into to a WSRP portlet by executing java -jar wsrp-predeploy.jar source EAR target EAR as explained in http://download.oracle.com/docs/cd/E12839_01/webcenter.1111/e12405/wcadm_portlet_prod.htm#CHDECJHI) I try to deploy it into WebLogic with the WebLogic Console and I get this exception. My Environment WebCenter Suite (11.1.1.2.0) + WebLogic Server (10.3.2) downloaded from the oracle.com. Default configuration S.O: Windows XP SP3 Thanks in advance for your time.

    Read the article

  • build error with boost spirit grammar (boost 1.43 and g++ 4.4.1) part II

    - by lurscher
    I'm having issues getting a small spirit/qi grammar to compile. i am using boost 1.43 and g++ 4.4.1. the input grammar header: inputGrammar.h #include <boost/config/warning_disable.hpp> #include <boost/spirit/include/qi.hpp> #include <boost/spirit/include/phoenix_core.hpp> #include <boost/spirit/include/phoenix_operator.hpp> #include <boost/spirit/include/phoenix_fusion.hpp> #include <boost/spirit/include/phoenix_stl.hpp> #include <boost/fusion/include/adapt_struct.hpp> #include <boost/variant/recursive_variant.hpp> #include <boost/foreach.hpp> #include <iostream> #include <fstream> #include <string> #include <vector> namespace sp = boost::spirit; namespace qi = boost::spirit::qi; using namespace boost::spirit::ascii; //using namespace boost::spirit::arg_names; namespace fusion = boost::fusion; namespace phoenix = boost::phoenix; using phoenix::at_c; using phoenix::push_back; template< typename Iterator , typename ExpressionAST > struct InputGrammar : qi::grammar<Iterator, ExpressionAST(), space_type> { InputGrammar() : InputGrammar::base_type( block ) { tag = sp::lexeme[+(alpha) [sp::_val += sp::_1]];//[+(char_ - '<') [_val += _1]]; block = sp::lit("block") [ at_c<0>(sp::_val) = sp::_1] >> "(" >> *instruction[ push_back( at_c<1>(sp::_val) , sp::_1 ) ] >> ")"; command = tag [ at_c<0>(sp::_val) = sp::_1] >> "(" >> *instruction [ push_back( at_c<1>(sp::_val) , sp::_1 )] >> ")"; instruction = ( command | tag ) [sp::_val = sp::_1]; } qi::rule< Iterator , std::string() , space_type > tag; qi::rule< Iterator , ExpressionAST() , space_type > block; qi::rule< Iterator , ExpressionAST() , space_type > function_def; qi::rule< Iterator , ExpressionAST() , space_type > command; qi::rule< Iterator , ExpressionAST() , space_type > instruction; }; the test build program: #include <iostream> #include <string> #include <vector> using namespace std; //my grammar #include <InputGrammar.h> struct MockExpressionNode { std::string name; std::vector< MockExpressionNode > operands; typedef std::vector< MockExpressionNode >::iterator iterator; typedef std::vector< MockExpressionNode >::const_iterator const_iterator; iterator begin() { return operands.begin(); } const_iterator begin() const { return operands.begin(); } iterator end() { return operands.end(); } const_iterator end() const { return operands.end(); } bool is_leaf() const { return ( operands.begin() == operands.end() ); } }; BOOST_FUSION_ADAPT_STRUCT( MockExpressionNode, (std::string, name) (std::vector<MockExpressionNode>, operands) ) int const tabsize = 4; void tab(int indent) { for (int i = 0; i < indent; ++i) std::cout << ' '; } template< typename ExpressionNode > struct ExpressionNodePrinter { ExpressionNodePrinter(int indent = 0) : indent(indent) { } void operator()(ExpressionNode const& node) const { cout << " tag: " << node.name << endl; for (int i=0 ; i < node.operands.size() ; i++ ) { tab( indent ); cout << " arg "<<i<<": "; ExpressionNodePrinter(indent + 2)( node.operands[i]); cout << endl; } } int indent; }; int test() { MockExpressionNode root; InputGrammar< string::const_iterator , MockExpressionNode > g; std::string litA = "litA"; std::string litB = "litB"; std::string litC = "litC"; std::string litD = "litD"; std::string litE = "litE"; std::string litF = "litF"; std::string source = litA+"( "+litB+" ,"+litC+" , "+ litD+" ( "+litE+", "+litF+" ) "+ " )"; string::const_iterator iter = source.begin(); string::const_iterator end = source.end(); bool r = qi::phrase_parse( iter , end , g , space , root ); ExpressionNodePrinter< MockExpressionNode > np; np( root ); }; int main() { test(); } finally, the build error is the following: (the full error trace is 20 times bigger than the allowed size for a stackoverflow question, so i posted the full version of it at http://codepad.org/Q74IVCUc) /usr/bin/make -f nbproject/Makefile-linux_amd64_devel.mk SUBPROJECTS= .build-conf make[1]: se ingresa al directorio `/home/mineq/NetBeansProjects/InputParserTests' /usr/bin/make -f nbproject/Makefile-linux_amd64_devel.mk dist/linux_amd64_devel/GNU-Linux-x86/vpuinputparsertests make[2]: se ingresa al directorio `/home/mineq/NetBeansProjects/InputParserTests' mkdir -p build/linux_amd64_devel/GNU-Linux-x86 rm -f build/linux_amd64_devel/GNU-Linux-x86/tests_main.o.d g++ `llvm-config --cxxflags` `pkg-config --cflags unittest-cpp` `pkg-config --cflags boost-1.43` `pkg-config --cflags boost-coroutines` -c -g -I../InputParser -MMD -MP -MF build/linux_amd64_devel/GNU-Linux-x86/tests_main.o.d -o build/linux_amd64_devel/GNU-Linux-x86/tests_main.o tests_main.cpp from /home/mineq/third_party/boost_1_43_0/boost/spirit/include/phoenix_operator.hpp:11, from ../InputParser/InputGrammar.h:14, from tests_main.cpp:14: /home/mineq/third_party/boost_1_43_0/boost/spirit/home/phoenix/operator/self.hpp: In instantiation of ‘const int boost::phoenix::result_of_assign<MockExpressionNode&, boost::variant<MockExpressionNode, std::basic_string<char, std::char_traits<char>, std::allocator<char> >, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_>&>::size’: In file included from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/phoenix/operator.hpp:16, /home/mineq/third_party/boost_1_43_0/boost/spirit/home/phoenix/operator/self.hpp:27: instantiated from ‘const int boost::phoenix::result_of_assign<MockExpressionNode&, boost::variant<MockExpressionNode, std::basic_string<char, std::char_traits<char>, std::allocator<char> >, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_>&>::index’ /home/mineq/third_party/boost_1_43_0/boost/spirit/home/phoenix/operator/self.hpp:27: instantiated from ‘boost::phoenix::result_of_assign<MockExpressionNode&, boost::variant<MockExpressionNode, std::basic_string<char, std::char_traits<char>, std::allocator<char> >, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_>&>’ /home/mineq/third_party/boost_1_43_0/boost/mpl/eval_if.hpp:38: instantiated from ‘boost::mpl::eval_if<boost::mpl::or_<boost::phoenix::is_actor<MockExpressionNode&>, boost::phoenix::is_actor<boost::variant<MockExpressionNode, std::basic_string<char, std::char_traits<char>, std::allocator<char> >, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_>&>, mpl_::bool_<false>, mpl_::bool_<false>, mpl_::bool_<false> >, boost::phoenix::re_curry<boost::phoenix::assign_eval, MockExpressionNode&, boost::variant<MockExpressionNode, std::basic_string<char, std::char_traits<char>, std::allocator<char> >, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_>&, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_>, boost::phoenix::result_of_assign<MockExpressionNode&, boost::variant<MockExpressionNode, std::basic_string<char, std::char_traits<char>, std::allocator<char> >, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_>&> >’ /home/mineq/third_party/boost_1_43_0/boost/spirit/home/phoenix/operator/self.hpp:69: instantiated from ‘boost::phoenix::assign_eval::result<boost::phoenix::basic_environment<boost::fusion::vector1<boost::variant<MockExpressionNode, std::basic_string<char, std::char_traits<char>, std::allocator<char> >, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_>&>, boost::spirit::context<boost::fusion::cons<MockExpressionNode&, boost::fusion::nil>, boost::fusion::vector0<void> >, bool, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_>, boost::spirit::attribute<0>, boost::spirit::argument<0> >’ /home/mineq/third_party/boost_1_43_0/boost/spirit/home/phoenix/core/detail/composite_eval.hpp:89: instantiated from ‘boost::phoenix::detail::composite_eval<2>::result<boost::phoenix::composite<boost::phoenix::assign_eval, boost::fusion::vector<boost::spirit::attribute<0>, boost::spirit::argument<0>, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_> >, boost::phoenix::basic_environment<boost::fusion::vector1<boost::variant<MockExpressionNode, std::basic_string<char, std::char_traits<char>, std::allocator<char> >, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_>&>, boost::spirit::context<boost::fusion::cons<MockExpressionNode&, boost::fusion::nil>, boost::fusion::vector0<void> >, bool, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_> >’ /home/mineq/third_party/boost_1_43_0/boost/spirit/home/phoenix/core/composite.hpp:61: instantiated from ‘boost::phoenix::composite<boost::phoenix::assign_eval, boost::fusion::vector<boost::spirit::attribute<0>, boost::spirit::argument<0>, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_> >::result<boost::phoenix::basic_environment<boost::fusion::vector1<boost::variant<MockExpressionNode, std::basic_string<char, std::char_traits<char>, std::allocator<char> >, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_>&>, boost::spirit::context<boost::fusion::cons<MockExpressionNode&, boost::fusion::nil>, boost::fusion::vector0<void> >, bool, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_> >’ /home/mineq/third_party/boost_1_43_0/boost/spirit/home/phoenix/core/actor.hpp:56: instantiated from ‘boost::phoenix::eval_result<boost::phoenix::composite<boost::phoenix::assign_eval, boost::fusion::vector<boost::spirit::attribute<0>, boost::spirit::argument<0>, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_> >, boost::phoenix::basic_environment<boost::fusion::vector1<boost::variant<MockExpressionNode, std::basic_string<char, std::char_traits<char>, std::allocator<char> >, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_>&>, boost::spirit::context<boost::fusion::cons<MockExpressionNode&, boost::fusion::nil>, boost::fusion::vector0<void> >, bool, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_> >’ /home/mineq/third_party/boost_1_43_0/boost/spirit/home/phoenix/core/actor.hpp:65: instantiated from ‘boost::phoenix::actor<boost::phoenix::composite<boost::phoenix::assign_eval, boost::fusion::vector<boost::spirit::attribute<0>, boost::spirit::argument<0>, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_> > >::result<boost::phoenix::actor<boost::phoenix::composite<boost::phoenix::assign_eval, boost::fusion::vector<boost::spirit::attribute<0>, boost::spirit::argument<0>, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_> > >(boost::fusion::vector1<boost::variant<MockExpressionNode, std::basic_string<char, std::char_traits<char>, std::allocator<char> >, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_>&>&, boost::spirit::context<boost::fusion::cons<MockExpressionNode&, boost::fusion::nil>, boost::fusion::vector0<void> >&, bool&)>’ /home/mineq/third_party/boost_1_43_0/boost/spirit/home/support/action_dispatch.hpp:44: instantiated from ‘bool boost::spirit::traits::action_dispatch<Component>::operator()(const boost::phoenix::actor<Eval>&, Attribute&, Context&) [with Eval = boost::phoenix::composite<boost::phoenix::assign_eval, boost::fusion::vector<boost::spirit::attribute<0>, boost::spirit::argument<0>, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_> >, Attribute = boost::variant<MockExpressionNode, std::basic_string<char, std::char_traits<char>, std::allocator<char> >, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_, boost::detail::variant::void_>, Context = boost::spirit::context<boost::fusion::cons<MockExpressionNode&, boost::fusion::nil>, boost::fusion::vector0<void> >, Component = boost::spirit::qi::alternative<boost::fusion::cons<boost::spirit::qi::reference<const boost::spirit::qi::rule<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode(), boost::proto::exprns_::expr<boost::proto::tag::terminal, boost::proto::argsns_::term<boost::spirit::tag::char_code<boost::spirit::tag::space, boost::spirit::char_encoding::ascii> >, 0l>, boost::fusion::unused_type, boost::fusion::unused_type> >, boost::fusion::cons<boost::spirit::qi::reference<const boost::spirit::qi::rule<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, std::string(), boost::proto::exprns_::expr<boost::proto::tag::terminal, boost::proto::argsns_::term<boost::spirit::tag::char_code<boost::spirit::tag::space, boost::spirit::char_encoding::ascii> >, 0l>, boost::fusion::unused_type, boost::fusion::unused_type> >, boost::fusion::nil> > >]’ /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/action/action.hpp:62: instantiated from ‘bool boost::spirit::qi::action<Subject, Action>::parse(Iterator&, const Iterator&, Context&, const Skipper&, Attribute&) const [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, Context = boost::spirit::context<boost::fusion::cons<MockExpressionNode&, boost::fusion::nil>, boost::fusion::vector0<void> >, Skipper = boost::spirit::qi::char_class<boost::spirit::tag::char_code<boost::spirit::tag::space, boost::spirit::char_encoding::ascii> >, Attribute = const boost::fusion::unused_type, Subject = boost::spirit::qi::alternative<boost::fusion::cons<boost::spirit::qi::reference<const boost::spirit::qi::rule<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode(), boost::proto::exprns_::expr<boost::proto::tag::terminal, boost::proto::argsns_::term<boost::spirit::tag::char_code<boost::spirit::tag::space, boost::spirit::char_encoding::ascii> >, 0l>, boost::fusion::unused_type, boost::fusion::unused_type> >, boost::fusion::cons<boost::spirit::qi::reference<const boost::spirit::qi::rule<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, std::string(), boost::proto::exprns_::expr<boost::proto::tag::terminal, boost::proto::argsns_::term<boost::spirit::tag::char_code<boost::spirit::tag::space, boost::spirit::char_encoding::ascii> >, 0l>, boost::fusion::unused_type, boost::fusion::unused_type> >, boost::fusion::nil> > >, Action = boost::phoenix::actor<boost::phoenix::composite<boost::phoenix::assign_eval, boost::fusion::vector<boost::spirit::attribute<0>, boost::spirit::argument<0>, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_> > >]’ /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/nonterminal/detail/parser_binder.hpp:33: instantiated from ‘bool boost::spirit::qi::detail::parser_binder<Parser, Auto>::call(Iterator&, const Iterator&, Context&, const Skipper&, mpl_::true_) const [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, Skipper = boost::spirit::qi::char_class<boost::spirit::tag::char_code<boost::spirit::tag::space, boost::spirit::char_encoding::ascii> >, Context = boost::spirit::context<boost::fusion::cons<MockExpressionNode&, boost::fusion::nil>, boost::fusion::vector0<void> >, Parser = boost::spirit::qi::action<boost::spirit::qi::alternative<boost::fusion::cons<boost::spirit::qi::reference<const boost::spirit::qi::rule<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode(), boost::proto::exprns_::expr<boost::proto::tag::terminal, boost::proto::argsns_::term<boost::spirit::tag::char_code<boost::spirit::tag::space, boost::spirit::char_encoding::ascii> >, 0l>, boost::fusion::unused_type, boost::fusion::unused_type> >, boost::fusion::cons<boost::spirit::qi::reference<const boost::spirit::qi::rule<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, std::string(), boost::proto::exprns_::expr<boost::proto::tag::terminal, boost::proto::argsns_::term<boost::spirit::tag::char_code<boost::spirit::tag::space, boost::spirit::char_encoding::ascii> >, 0l>, boost::fusion::unused_type, boost::fusion::unused_type> >, boost::fusion::nil> > >, boost::phoenix::actor<boost::phoenix::composite<boost::phoenix::assign_eval, boost::fusion::vector<boost::spirit::attribute<0>, boost::spirit::argument<0>, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_> > > >, Auto = mpl_::bool_<false>]’ /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/nonterminal/detail/parser_binder.hpp:53: instantiated from ‘bool boost::spirit::qi::detail::parser_binder<Parser, Auto>::operator()(Iterator&, const Iterator&, Context&, const Skipper&) const [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, Skipper = boost::spirit::qi::char_class<boost::spirit::tag::char_code<boost::spirit::tag::space, boost::spirit::char_encoding::ascii> >, Context = boost::spirit::context<boost::fusion::cons<MockExpressionNode&, boost::fusion::nil>, boost::fusion::vector0<void> >, Parser = boost::spirit::qi::action<boost::spirit::qi::alternative<boost::fusion::cons<boost::spirit::qi::reference<const boost::spirit::qi::rule<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode(), boost::proto::exprns_::expr<boost::proto::tag::terminal, boost::proto::argsns_::term<boost::spirit::tag::char_code<boost::spirit::tag::space, boost::spirit::char_encoding::ascii> >, 0l>, boost::fusion::unused_type, boost::fusion::unused_type> >, boost::fusion::cons<boost::spirit::qi::reference<const boost::spirit::qi::rule<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, std::string(), boost::proto::exprns_::expr<boost::proto::tag::terminal, boost::proto::argsns_::term<boost::spirit::tag::char_code<boost::spirit::tag::space, boost::spirit::char_encoding::ascii> >, 0l>, boost::fusion::unused_type, boost::fusion::unused_type> >, boost::fusion::nil> > >, ... ... more errors but i had to truncate to fit the 30k limit make[2]: *** [build/linux_amd64_devel/GNU-Linux-x86/tests_main.o] Error 1 make[2]: se sale del directorio `/home/mineq/NetBeansProjects/InputParserTests' make[1]: *** [.build-conf] Error 2 make[1]: se sale del directorio `/home/mineq/NetBeansProjects/InputParserTests' make: *** [.build-impl] Error 2 BUILD FAILED (exit value 2, total time: 2m 13s)

    Read the article

< Previous Page | 29 30 31 32 33 34 35 36 37 38 39  | Next Page >