Search Results

Search found 11483 results on 460 pages for 'ip contracts'.

Page 330/460 | < Previous Page | 326 327 328 329 330 331 332 333 334 335 336 337  | Next Page >

• No DNS resolving with VPN (RRAS)

  - by Sven

  I have a RRAS server setup on a Windows 2003 machine with two NIC's. The VPN works like a charm, I can ping all the other computers on the network. But it fails when I try to access resources with hostnames. I searches for a solution but the ones I found are about RRAS setup with a remote DHCP server. But in my case it's the RRAS server that hands out the ip addresses (option for redirection for WINS, DNS is ON and set to the LAN NIC). I also heard something about FQDN.. but I don't really understand what that is.

  Read the article

• Mikrotik queues and limiting total upstream bandwidth

  - by g18c

  With a Mikrotik router (form of embedded Linux) I have created simple queues per machine matched by source IP address. Each of the 4 machine queues has an unlimited burst 3Mbps/3Mbps for Tx/Rx. During speedtest.net on all 4 machines at the same time, each machine shows 3Mbps (and is limited correctly there), however the total bandwidth on the uplink goes to 12Mbps (i need to set this to 10Mbps max for the upstream). I want to restrict the actual traffic passing across the uplink port to 10Mbps regardless of what the other queues are doing (I need this catch all queue to have the final say on the uplink speed). For example I need: Scenario A Machine A transferring @ 3Mbps Machine B transferring @ 3Mbps Machine C transferring @ 3Mbps Machine D transferring @ 0Mbps Up-link speed = 9Mbps Scenario B Machine A trying to transfer @ 3Mbps Machine B trying to transfer @ 3Mbps Machine C trying to transfer @ 3Mbps Machine D trying to transfer @ 3Mbps Up-link speed = 10Mbps Actual transfer speed of machine A,B,C,D = 2.5Mbps This is to allow slight over subscription of bandwidth queues as not all will be transmitting at 3Mbps all the time. Is this possible and if so how would one go about doing this?

  Read the article

• AWStats log format for tomcat access logs which has X-Forwarded-For

  - by Nix

  What should be the AWStats log format for below tomcat access logs ? I tried these formats but the external IP addresses are not coming into AWStats reports. LogFormat="%host %other %logname %time1 %methodurl %code %bytesd %refererquot %uaquot %referer %other %other" LogFormat="%other %other %logname %time1 %methodurl %code %bytesd %refererquot %uaquot %host_proxy" tomcat valve settings: pattern="%h %l %{USER_ID}s %t &quot;%r&quot; %s %b &quot;%{Referer}i&quot; &quot;%{User-Agent}i&quot; &quot;X-Forwarded-For=%{X-Forwarded-For}i&quot; &quot;JSESSIONID=%{JSESSIONID}c&quot; %D" Log entry: 127.0.0.1 - - [04/Nov/2013:13:39:55 +0000] "GET / HTTP/1.1" 200 12345 "https://www.google.com/url?some_url" "Mozilla/5.0 (Windows NT 6.3; WOW64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/30.0.1599.101 Safari/537.36" "X-Forwarded-For=real_ip, proxy_server_internal_ip" "JSESSIONID=-" 12345

  Read the article

• RDP add domain users broken

  - by Robuust

  I have 3 servers, - domain controller with dns services - dhcp/rras - file/random server with files stored on it and nothing special so far. All servers have static IP's All servers are in the same domain (SOFTWARE) RDP is enabled for all 3 servers All servers are Windwos Server 2008 R2 I can connect to the DHCP/RRAS server via RDP I cannot connect to DC and File server When I add RPD users (both are domain admin for testing) to the File server they show up like this: What is happening what I don't see? And additional why don't I even get a login screen for RPD? Thanks in advance.

  Read the article

• Resilient Linux Mail Server Setup

  - by Coops

  How would people design a resilient mail server setup with Linux? On an application level what the system needs to provide is both an incoming and outgoing mail service (i.e. SMTP & IMAP), along with filtering and archive storage (the archive part isn't critical yet, so we'll look at this later probably). What is required on top of this is a resilient system, i.e. one which will handle individual server failures without interrupting service. As such I would term this a High Availability mail system. This is in contrast to a High Performance mail setup, as in our case the volume of mail being handled isn't the important factor, it's simply that it stays online. Having not approached this problem before, the first thing I thought of was a clustered file system (gfs/gluster/etc), combined with heartbeat to failover a floating IP to another box in the case of a server failure. Combined with postfix & dovecot does this sound feasible to people?

  Read the article

• What are the IPv6 Public and Private and Reserved ranges

  - by vipin raj

  I just want to know what are all the public IPv6 ranges which ISPs or other users can use? Also need a list of addresses which can be used in private networks and also the list of addresses which never can be used in any network. I have been searching through different web sites. But none gives a reliable answer. Actually we are developing an application which allows user to plan their IP address(create supernets, subnets, hosts, assign host to ports etc). So my application should be able to distinguish between all kinds of address ranges, whether it is reserved, public, private, multicast etc

  Read the article

• Why can't my networks reach each other?

  - by HOLOGRAPHICpizza

  We have two Buffalo WZR-HP-G300NH2 routers, with the default firmware, DD-WRT v24SP2-MULTI (10/31/11) std - build 17798. Each has a separate cable internet connection with a public static IP address. They are both in the 24.123.68.0/24 space. Both of them can contact pretty much the whole internet, and they can both be accessed out on the internet with no problem, but for some reason they can't talk to each other! When I try to ping one from the other I always get "Destination Host Unreachable". There are no strange routing or firewall rules in place. And they are both set to respond to pings, I can ping them from outside. Our main IT guy is going to call our ISP on Monday, but I'm impatient, so does anyone have any ideas?

  Read the article

• Routing application traffic through specific interface

  - by UnicornsAndRainbows

  Hello All! First question here, so please go easy: I have a debian linux 5.0 server with two public interfaces. I would like to route outbound traffic from one instance of an application via one interface and the second instance through the second interface. There are some challenges: both instances of the application use the same protocol both instances of the application can access the entire internet (can't route based on dest network) I can't change the code of the application I don't think a typical approach to load balancing all traffic is going to work well, because there are relatively few destination servers being accessed in the outbound traffic, and all traffic would really need to be distributed pretty evenly across these relatively few servers. I could probably run two virtualized servers on the box and bind each of them to a different external ip, but I'm looking for a simpler solution, maybe using iproute or iptables? Any ideas for me? Thanks in advance - and I'm happy to answer any questions.

  Read the article

• Subdomain only accessible from one computer

  - by Edan Maor

  I recently added a wildcard A record to my domain (*.root.com), mapping it to a certain elastic ip on AWS. I've configured apache to redirect all references to something.root.com to root.com, except for one specific "dev" subdomain, which is hosting its own site (a Django app, specifically). The Problem: This setup works perfectly for me on my computer. But on other computers around the office, it doesn't seem to work. Specifically, trying to visit dev.root.com gives an "unable to find server" error. Pinging dev.root.com gives a "cannot resolve hostname" error. The weird thing: pinging any other subdomain of root.com does work, from all machines. I would think this was all due to DNS propagation, except all the computers are behind the same office router, so how could that be the case? Any ideas?

  Read the article

• Single hardware unit to protect web servers and implement smart publishing

  - by Maxim V. Pavlov

  Thus far we've been using the combination of Forefront TMG 2010 as an edge firewall + intrusion prevention system + web site publishing mechanism in the data center to work with a few web server machines. Since we develop on ASP.NET, we are IIS and in general - Microsoft crowd. Since TMG is being deprecated, we need to come up with a hardware alternative to protect and serve our data center web cloud. Could you please advise a hardware or virtual appliance solution that can provide routing, flood prevention and smart web-site publishing (one IP - many web sites based on domain name filter) all in one. Even if it is hard to configure, as long as it covers all these features, we will invest to learn and replace TMG eventually.

  Read the article

• One EC2 source with distributed varnish machines

  - by Elad Lachmi

  I have a web site hosted in an EC2 instance (2008 r2 + iis7.5 + sql server). I put one linux box running RHEL with varnish. After some configuration trail and error, I found a configuration that works. Now I want to duplicate the varnish boxes to other availability zones, but continue to pull the pages from the original windows box. It is my understanding that I can put the varnish boxes in different zones and pull from the windows box via it's external IP. But what do I need to do in order for each user to receive content from the box physically closest to them? Is this even possible? Thank you!

  Read the article

• Setting up wifi router as a switch for Internet Connection Sharing

  - by William C

  Can my laptop with a 3G connection share its Internet via a Wifi router (Dlink DIR-615)? I turned Internet Connection Sharing on and Windows assigned 192.168.137.1 to my laptop's LAN adapter. Do I connect my laptop to the WAN port or to the LAN port of the router? What should I set as my router's IP address? Do I turn DHCP on my router on? Do I assign 192.168.137.x as static addresses on the other computers? If not, what? Is there anything else I need to set on my router? Thank you!

  Read the article

• mailman not relaying email to external address

  - by gozzilli

  I have a setup of mailman with postfix on an ubuntu server 12.04. My problem is that mailing list emails are not forwarded to email addresses external to my institution. However the initial welcome email is received by everyone, internally and externally. in fact, a simple email from command line with mail is successfully sent to anyone after that, mailing list emails are only forwarded to internal addresses. the domain name I'm using for the server is not that of my institution who is hosting the server. Here is my main.cf: myorigin = sub.myinstitution.tld mynetworks = 127.0.0.0/8 xxx.xxx.xxx.xxx/16 # this is my institution ip range relayhost = smtp.myinstitution.tld inet_interfaces = loopback-only local_transport = error:local delivery is disabled virtual_alias_maps = hash:/etc/postfix/virtual smtpd_recipient_restrictions = permit_mynetworks myhostname = mywebsite.tld mydestination = $myhostname, localhost.$mydomain, localhost I also found these two links on serverfault and ubuntu forums, but neither of these solutions seem to do the trick for me. Any help would be much appreciated.

  Read the article

• Why change net.inet.tcp.tcbhashsize in FreeBSD?

  - by sh-beta

  In virtually every FreeBSD network tuning document I can find: # /boot/loader.conf net.inet.tcp.tcbhashsize=4096 This is usually paired with some unhelpful statement like "TCP control-block hash table tuning" or "Set this to a reasonable value." man 4 tcp isn't much help either: tcbhashsize Size of the TCP control-block hash table (read-only). This may be tuned using the kernel option TCBHASHSIZE or by setting net.inet.tcp.tcbhashsize in the loader(8). The only document I can find that touches on this mysterious thing is the Protocol Control Block Lookup subsection beneath Transport Layer in Optimizing the FreeBSD IP and TCP Stack, but its description is more about potential bottlenecks in using it. It seems tied to matching new TCP segments to their listening sockets, but I'm not sure how. What exactly is the TCP Control Block used for? Why would you want to set its hash size to 4096 or any other particular number?

  Read the article

• Restrict access to SSH for one specific user

  - by j0nes

  I am looking for a way to secure my servers with the following setup: I have a server where I can log in via SSH. The main account there (named "foo") is secured by a keybased login with password. I have another user account (named "bar") that I use to log in via cronjobs running on other servers - this one also has keybased login, but without password. Now I want to limit access to this machine for the "bar" account. The account should only be accessible via known IPs. However, the "foo" account should not be affected by this, this one should basically be accessible from any IP. How can I manage this? Or is there a simpler solution to everything?

  Read the article

• Outlook Anywhere remote https connection issue

  - by holian

  We have SBS 2003, and we use DYNDNS. We forward dyndns address 443 to local server ip 443 port. mycompany.dyndns.org:443 -- server.mycompany.local:443 In android phone i can check my mails with Outlook Active Snyc. From remote machine i can check my mails in owa (https://mycompany.dyndns.org/exchange) But i can't set up outlook 2013 to remote connect. I installed server.mycompany.local to remote machine trusted cert container, but i got error message: "There is a problem with the proxy server's security certificate. The name on the security certificate is invalid or does not match the name of the target site. Outlook is unable to connect to the proxy server. (Error Code 10)" Is it possible to connect exchange, via dnydns? Whats the problem? Thank you

  Read the article

• How to route all traffic over site to site VPN tunnel?

  - by Hutch

  I have a site to site VPN configured between our main site (Site A) and a remote site (Site B). Site A is 10.60.0.0/16 Site B is 192.168.99.0/24 The firewall in Site B is a Juniper SSG running ScreenOS 6.3 and I'm using a route based VPN. The tunnel works perfectly in that from Site A you can reach 192.168.99.0 via the tunnel, and from Site B you can reach 10.60.0.0 via the tunnel. However, we want it so that if you're in Site B and want the Internet it goes via the firewall at Site A, and right now on the Juniper 0.0.0.0 has the ISP router as next hop. My understanding is that on the Juniper, I can set a route for the /32 public IP at our main site that the VPN tunnel connects to to the ISP router via ethernet0/0 (the SSG's external interface), and then modify the 0.0.0.0 route to use our main site firewall via tunnel.1 (the VPN tunnel). Not sure I've explained that so well but is my understanding correct? Thanks

  Read the article

• Active Directory Replication across Sites slow or not working

  - by neildeadman

  I've just inherited (isn't it always the way!) a Windows Domain. The domain is spread across 2 sites. Site01 has 3 DCs & Site02 has 2 DCs. If I create a user in either site, the other DCs in that site, immediately replicate and show the new user. The new user is not shown in the other site though. If I manually run the following command, everything syncs and the new user appears: repadmin /syncall issdc01 /APed In the Inter-Site Transports DEFAULTIPSITELINK the replicate every time value is set to 180 minutes. I thought this was the solution, but on another Windows Domain, this is the same, but replication takes place across sites immediately. What can I check to resolve this issue? We are running Windows Server 2008 Results of dcdiag /test:dns show a server that is no longer part of our domain: TEST: Delegations (Del) Error: DNS server: oldserver.win.domain.com IP: [Missing glue A record]

  Read the article

• Highly Available Web Application (LAMP)

  - by Anthony Rizzo

  I work for a small company who provides a web application for thousands of users. Earlier this year they had one server hosted one company. We recently acquired another server in a different location with the hopes of one day making this a redundant failover machine. I understand what to do with the mysql replication, I plan on using a master-master replication setup, and rsync to sync the scripts and files, however I am at a stand still about how to configure the fail-over. Ideally I would like the two machines to accept requests, like a round robin dns, however if one machine goes down I do not want requests to go that machine. All of the solutions I am come across assumes high availability of servers in the same location, these servers are in two completely different locations with different public ip address. Any help would be great. Thanks

  Read the article

• Does a bad Internet connection increase bandwidth usage?

  - by Synetech

  My (Rogers) cable connection has been pretty bad recently (channels 3 and 10 are particularly fuzzy—it’s analog, not digital cable). Not surprisingly, this has caused my cable modem to drop out and have to reestablish a connection a couple of times since it started. The poor connection of course means higher corruption (not necessarily dropped per se) which causes the TCP/IP stack to have to retransmit packets more often. Reduction of bandwidth throughput aside, I got to wondering if it increases the actual bandwidth usage. That is, if there is a high error rate on the line causing packets to have to be retransmitted: Does this increase a bandwidth monitoring program’s numbers? Does the ISP count the retransmitted packets toward the monthly cap? Based on what I remember from my university networking courses and common sense, I have a feeling that the answer to both questions is yes, but I cannot reliably measure the first, and have no authoritative answer for the second. I’m wondering if maybe the retransmitted packets are acknowledged as being duplicates and thus not counted somewhere along the line.

  Read the article

• 2wire modem to linksys router

  - by Imajica666

  I want to hook a Linksys router to my 2wire modem/router (2701HG-b) to share my Internet connection. I ran from an open port from the 2wire to the WAN port of the Linksys but it will not work. I did this before with my cable modem to a router to my Linksys router. It worked then but not now. I read I can turn the 2 wire into a modem only but I need the 2wire wireless access also. IPCONFIG /ALL sees the 2wire with IP info as well as DHCP server/gateway. Any ideas?

  Read the article

• Unable to connect to Cygwin from Mac OS X by ssh

  - by skyjack

  I've started ssh server on Windows 7 using Cywgin and I'm trying to connect to it by ssh from Mac OS X Mavericks. It fails with next error: ./ssh username@hostname -v OpenSSH_6.6, OpenSSL 1.0.1g 7 Apr 2014 debug1: Reading configuration data /usr/local/etc/ssh/ssh_config debug1: Connecting to hostname [my ip] port 22. debug1: Connection established. debug1: identity file /Users/skyjack/.ssh/id_rsa type -1 debug1: identity file /Users/skyjack/.ssh/id_rsa-cert type -1 debug1: identity file /Users/skyjack/.ssh/id_dsa type -1 debug1: identity file /Users/skyjack/.ssh/id_dsa-cert type -1 debug1: identity file /Users/skyjack/.ssh/id_ecdsa type -1 debug1: identity file /Users/skyjack/.ssh/id_ecdsa-cert type -1 debug1: identity file /Users/skyjack/.ssh/id_ed25519 type -1 debug1: identity file /Users/skyjack/.ssh/id_ed25519-cert type -1 debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_6.6 ssh_exchange_identification: read: Connection reset by peer Meanwhile I can connect successfully from Red Hat. OpenSSH version on Cygwin: OpenSSH_6.4p1, OpenSSL 1.0.1f 6 Jan 2014 OpenSSH version on MAC OS X: OpenSSH_6.6p1, OpenSSL 1.0.1g 7 Apr 2014 Please advice.

  Read the article

• Pygrub with DRBD on Xen 3.2

  - by Joril

  Hi all, we have a two-node cluster using DRBD 8.2 on CentOS 5.2 64bit. The cluster runs a few VMs on top of Xen 3.2.1, here's the configuration for an Ubuntu Jaunty VM: name = 'dev' bootloader = '/usr/bin/pygrub' memory = '512' vif = [ 'ip=192.168.1.217,mac=00:16:3E:CD:60:80' ] disk = [ 'phy:/dev/drbd24,xvda1,w', 'phy:/dev/drbd25,xvda2,w' ] As you can see, the disks are specified like "phy:", and as such pygrub doesn't know a thing about the underlying drbd device... So my problem is that even though the VM boots just fine, it doesn't handle the state of the drbd device. As a result, when for some reason the device gets to a secondary/secondary state, the VM won't boot, and I have to manually specify which node is primary. I read that starting with Xen 3.3 pygrub understands the "drbd:" specification, and I think that it would fix my problem, but I can't upgrade Xen at the moment... Is there a workaround? For example, could I use the 3.3 version of pygrub? Thanks!

  Read the article

• What port should I use for my reverse proxy to Apache 2 from nginx?

  - by meder

  I have nginx setup as the defacto port 80. I want to setup django+mod_wsgi on Apache2. I'm worried if I leave Apache2 as 80 it will cause a conflict. Is it better to avoid the headache and change Apache to a different port? server { listen 80; server_name work.domain.org; access_log /www/work.domain.org/log/access.log; error_log /www/work.domain.org/log/error.log; location / { proxy_pass http://127.0.0.1:8080/; proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header X-Magic-Header "secret"; client_max_body_size 10m; } }

  Read the article

• Can't access LAN computers with SSH

  - by endolith

  I got a new Windows 7 machine, and was using VNC,SSH etc to connect to my Ubuntu machine, and it worked fine previously. Now it doesn't work if I use the machine's hostname or local IP, but if I use the DynDNS name, it works. I can also access it from my Android phone using the local hostname over SSH. If I try to connect with SSH to the hostname, it says "Host does not exist". VNC says "Failed to get server address". NX says "no address associated with name", and I don't see it in Windows' "Network" folder. I've rebooted everything. I've turned off Windows firewall. It was working fine a few days ago, but now it's not. How do I figure out what's blocking it?

  Read the article

< Previous Page | 326 327 328 329 330 331 332 333 334 335 336 337  | Next Page >