Search Results

Search found 16530 results on 662 pages for 'off shore'.

Page 330/662 | < Previous Page | 326 327 328 329 330 331 332 333 334 335 336 337  | Next Page >

• ATI Radeon Triple Monitor Setup

  - by Zak

  I have a Dell XPS 8300, and its got an ATI Radeon HD6450 installed. When running Ubuntu 12.04 the triple monitors work flawlessly. I can change the default, turn them on/off etc ... The problem is Windows 7. It is behaving much like in this thread. I know the card supports three, as it WORKS PERFECTLY in the linux portion of my dual boot. Windows can "see" all three, but will only allow two. Is this a WIndows 7 / ATI compatibility issue, or is Windows 7 just stupid (rhetorical)? Had I not had a dual boot Linux box, I might have read the above thread and thought "damn, it just won't work". But I use three monitors every day on this card, so I know it works.... Just not with Windows.

  Read the article

• 11.10 liveCD black screen

  - by Shaun Killingbeck

  Attempting to install/try ubuntu 11.10 on my new laptop, using a liveCD (and tried USB). I get the purple screen (with the man/keyboard at the bottom) and after that the screen flashes bright white before going black. Ubuntu continues to load in the background, with login sound etc but the screen is off. I have tried as many different solutions as I could find including: using nomodestep, xforcevesa, i915.modeset=0 in boot options (seperately): varying consequences, but either I end up at a blinking cursor with no prompt, a command line (startx fails: no screen found), or the original blank screen again Tried booting from VirtualBox - it crashes at the same place the screen would go blank when using a CD/USB tried 11.04: I don't have this problem BUT when trying to install, I get a ubi-partman error 141 (possibly down to the three partitions that came on my laptop... not sure why HP needed there own separate partition for HP Tools...) Model: HP Pavillion DV6 6B08SA Processor: AMD Quad-Core A6-3410MX APU with Radeon HD 6545G2 Dual Graphics (1.6 GHZ 4 MB L2 cache ) Chipset: AMD RS880M Any help would be greatly appreciated. I just want to be able to partition the drive and install Ubuntu. I'm assuming the issue is graphics card related, although I have no confirmation of that. I have caught a glimpse of some output to do with pulseaudio and [fail], but I can't imagine why that would cause a screen problem and the sound definitely works anyway.

  Read the article

• Time Machine/iMac loses all trace of external hard drive after a few days

  - by Bill

  First time posting, also a Mac newbie (recent windows convert) so I'm hoping I can get some help here :) I have a Hitachi Deskstar drive in an external casing that I got from ebuyer. (its one of those unknown fairly cheapish enclosures) connected via firewire. I hook it up and it works fine, but then at some point over the next week or so I'll realise that my last update was 3 days ago or so. At this point the Mac will not recognise the drive as existing and the only thing to do is switch off and on the external enclosure. It then works fine for a while. If I had to guess I'm assuming its powering down or something when the Mac goes into standby? Is there anyway to solve this?

  Read the article

• How to stop nginx on Mac OS 10.6.3

  - by Alex Kaushovik

  I've installed nginx server on my Mac from MacPorts: sudo port install nginx. Then I followed the recommendation from the port installation console and created the launchd startup item for nginx, then started the server. It works fine (after I renamed nginx.conf.example to nginx.conf and renamed mime.types.example to mime.types), but I couldn't stop it... I tried sudo nginx -s stop - this doesn't stop the server, I can still see "Welcome to nginx!" page in my browser on http://localhost, also I still see master and worker processes of nginx with ps -e | grep nginx. What is the best way to start/stop nginx on Mac? BTW, I've added "daemon off;" into nginx.conf - as recommended by various resources. Thank you.

  Read the article

• Windows 2008 Server Firewall blocks from printing in other subnet

  - by xenolf

  Greetings, i have a windows 2008 server with activated firewall in the 192.168.0.xx subnet. From there i want to print on an printer which is located in the 192.168.10.xx subnet. Now when i try to print with the firewall on, nothing happens... when i turn the firewall off it prints flawlessly. Now i messed around with the windows firewall for about 4 hours straight and i cant seem to find a rule which lets me print. Even when i set the firewall to let everything through im unable to print. Has anyone encountered the same or a similar problem and has a solution for this issue? Thanks in advance xenolf

  Read the article

• Password for iis after installing

  - by zapping

  After installing IIS on my dev system, window xp professional, its asking for username and password while trying to access http://localhost. Can you please help me out. Tried googling and tried may things but could not resolve the issue. Anonymous access is enabled iusr_ is given full access to the wwwroot folder asp.net2.0 has been registered etc. But still not working. :( EDIT: Now the password issue has gone off and shows this: Error Type: Microsoft VBScript runtime (0x800A0046) Permission denied: 'GetObject' /localstart.asp, line 40 Browser Type: Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; Trident/4.0; Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1) ; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729) Page: GET /localstart.asp

  Read the article

• how to get the update manager window visible?

  - by Max Waterman

  I can see from the launcher that the Update Manager is running - it has the little triangle by it. However, I am having trouble seeing the window. If I click on it from one desktop, it switches to another, so I assume that the Update Manager has its window on that other desktop, but it still doesn't show anything. If I click alt-tab to switch between apps, I can see that the Update Manager is there, but selecting it just shows me a blank screen. Also, when I select it, while still holding the alt-key, I see the top menu bar switch to 'Update Manager', but when I release alt, it changes back to Ubuntu Desktop. It's almost like the app is off the screen somewhere, perhaps with just a single pixel showing or something like that. disclaimer: One thing that might be affecting things is that I have 'focus follows mouse' configured, which makes things a bit funky with the menu not being on the window, where it should be (perhaps there's a way to put it back with the window?) - I like to be able to type into background windows, and manually control which window is in the foreground.

  Read the article

• Boolean checks with a single quadtree, or multiple quadtrees?

  - by Djentleman

  I'm currently developing a 2D sidescrolling shooter game for PC (think metroidvania but with a lot more happening at once). Using XNA. I'm utilising quadtrees for my spatial partitioning system. All objects will be encompassed by standard bounding geometry (box or sphere) with possible pixel-perfect collision detection implemented after geometry collision (depends on how optimised I can get it). These are my collision scenarios, with < representing object overlap (multiplayer co-op is the reason for the player<player scenario): Collision scenarios (true = collision occurs): Player <> Player = false Enemy <> Enemy = false Player <> Enemy = true PlayerBullet <> Enemy = true PlayerBullet <> Player = false PlayerBullet <> EnemyBullet = true PlayerBullet <> PlayerBullet = false EnemyBullet <> Player = true EnemyBullet <> Enemy = false EnemyBullet <> EnemyBullet = false Player <> Environment = true Enemy <> Environment = true PlayerBullet <> Environment = true EnemyBullet <> Environment = true Going off this information and the fact that were will likely be several hundred objects rendering on-screen at any given time, my question is as follows: Which method is likely to be the most efficient/optimised and why: Using a single quadtree with boolean checks for collision between the different types of objects. Using three quadtrees at once (player, enemy, environment), only testing the player and enemy trees against each other while testing both the player and enemy trees against the environment tree.

  Read the article

• 12-24 rack, 10-32 server thumbscrew. How to mount?

  - by JJ.

  We have just purchased a APC rack (model AR204A) with 12-24 threaded holes. We couldn't get a "square hole" model in time for our setup deadline. Unfortunately our rack servers (Lenovo RD240) appear to have 10-32 thumbscrews for securing the server to the rack. We've successfully mounted the server rails to the rack using 12-24 screws however the 10-32 thumbscrews in the server front won't "grab" the 12-24 holes in the rack, thus there is nothing to stop the server from sliding right off the rack if pushed from the back. The thumb screws on the server don't seem to be removable, so we can't simply use 12-24 screws instead. Any suggestions on how to work around this problem? Is there any way to "convert" a 12-24 hole to a 10-32 thread (or similar approach)? Thanks in advance.

  Read the article

• Getting Synergy+ to work with Windows 7 64bit and Windows XP 32bit?

  - by john crisp

  My Windows XP box is Dell 4550 dimension. Windows 7 box is Home Premium. Synergy + installs fine on the Windows 7box, but using Windows xp as the client, it won't work? Do I need to disconnect the vga connection from my monitor and control entirely from the win7 dvi connection? In setting up ( links ) on Windows 7 as the server, I have NO way of inputing info? The setup on the Windows xp box is simple and does so OK, but I can't connect to the Windows xp box! It must be the vga connection on the Windows XP box. In order to use both machines, I have to turn one off and the other on. Hence-the VGA is needed on Windows XP. Any info/help most appreciated.

  Read the article

• Windows Media Player 11 Not Detecting Autoplaylists

  - by tuna

  Every time I open Windows Media Player it fails to detect my autoplaylists stored in <my music library dir>\Playlists. This appears to lead to sync problems since I (exclusively) use autoplaylists to sync music to my mobile. As WMP 11 fails to find the any sync autoplaylists it infuriatingly seems to decide that I want no music at all on my phone and proceeds to delete all my music off my phone. I guess these are two seperate problems but it seems to me they are related. If anyone can shed any light on a fix, that would be much appreciated. Many thanks

  Read the article

• Cannot start Xampp on server with IIS

  - by Vafello

  I am running a Windows Server 2003 with IIS and I am trying to install XAMPP in order to be able to run php and mysql based pages. I tried to install php on IIS, but it is too complicated and time consuming for me. I am able to run asp on localhost/ and I would like to run php websites on different port, say localhost:81/. After installing xampp and changing the port in httpd.conf file to 81 I try to turn on apache, but it turns off after about 5 seconds. Mysql works fine. It seems that there is a port clash, but I do not know how to change the ports and turn the apache permanently. Any advice appreciated. (I know it is more a server fault question, however I posted it there as well and did not get any reply, so I decided to try here)

  Read the article

• Locking down a server for shared internet hosting.

  - by Wil

  Basically I control several servers and I only host either static websites or scripts which I have designed, so I trust them up to a point. However, I have a few customers who want to start using scripts such as Wordpress or many others - and they want full control over their account. I have started to do the basics - like on php.ini, I have locked it down and restricted commands such as proc, however, there is obviously a lot more I can do. right now, using NTFS permissions, I am trying to lock down the server by running Application Pools and individual sites in their own user, however I feel like I am hitting brick walls... (My old question on Server Fault). At the moment, the only route I can think of is either to implement an off the shelf control panel - which will be expensive and quite frankly, over the top, or look at the Microsoft guide - which is really for an entire infrastructure, not for someone who just wants to lock down a few servers. Does anyone have any guides that can put me on the correct path?

  Read the article

• How do I set up different configurations on an Ubuntu laptop based on different physical locations?

  - by Andrew Larned

  I'm looking for a way to have a couple (or three) multiple configurations set up on my laptop, and easily switch between them. To be more specific, when my laptop is at work, it's plugged into a second monitor, and has a specific set of networks configurations. At home, the second monitor is gone, the network configurations are different. At a public wireless point there are other configurations to set, etc. I know I can go into my preferences and turn on/turn off the monitor, and mess with the networking preferences, and so on, but I'm looking for a way to change a bunch of preferences all at once, and if it's possible to do that automatically, maybe based on the wireless APs in the vicinity, that would be even better.

  Read the article

• Howto boot directly into a VirtualBox image?

  - by mawimawi

  I have a running setup as following: Native OS: Windows 7 64bit, 3 Partitions: c: (System) d: (FAT32, here is my vdi file) e: (unformatted) VirtualBox: Fedora 14 running off the vdi file on drive d. Usually this setup is great for me, but sometimes I'd like to run Linux natively, and not inside VirtualBox. Is there a way to boot directly into the vdi file without the Windows overhead? E.g. using a USB stick with some modified Linux Kernel / GRUB that can mount the vdi file directly as "/"? Or copy the contents of my vdi file to the empty partition and somehow use this from VirtualBox (when booting into Windows) AND directly booting into Linux? Hope to get some hints or even howtos.

  Read the article

• Howto boot directly into a VirtualBox image?

  - by mawimawi

  I have a running setup as following: Native OS: Windows 7 64bit, 3 Partitions: c: (System) d: (FAT32, here is my vdi file) e: (unformatted) VirtualBox: Fedora 14 running off the vdi file on drive d. Usually this setup is great for me, but sometimes I'd like to run Linux natively, and not inside VirtualBox. Is there a way to boot directly into the vdi file without the Windows overhead? E.g. using a USB stick with some modified Linux Kernel / GRUB that can mount the vdi file directly as "/"? Or copy the contents of my vdi file to the empty partition and somehow use this from VirtualBox (when booting into Windows) AND directly booting into Linux? Hope to get some hints or even howtos. EDIT: yes, sorry. not programming related. I posted the question to serverfault.com (hopefully that's the better site for my question.)

  Read the article

• Parsing mathematical experssions with two values that have parenthesis and minus signs

  - by user45921

  I'm trying to parse equations like these which only has two values or the square root of a certain value from a text file: 100+100 -100-100 -(100)+(-100) sqrt(100) by the minues signs, parenthesis and the operator symbol in the middle and the square root, and I have no idea how to start off... I've got the file part done and the simple calculation parts except that I couldnt get my program to solve the equations in the above. #include <stdio.h> #include <string.h> #include <stdlib.h> #include <math.h> main(){ FILE *fp; char buff[255], sym,sym2,del1,del2,del3,del4; double num1, num2; int ret; fp = fopen("input.txt","r"); while(fgets(buff,sizeof(buff),fp)!=NULL){ char *tok = buff; sscanf(tok,"%lf%c%lf",&num1,&sym,&num2); switch(sym){ case '+': printf("%lf\n", num1+num2); break; case '-': printf("%lf\n", num1-num2); break; case '*': printf("%lf\n", num1*num2); break; case '/': printf("%lf\n", num1/num2); break; default: printf("The input value is not correct\n"); break; } } fclose(fp); } that is what have I written for the other basic operations without parenthesis and the minus sign for the second value and it works great for the simple ones. I'm using a switch method to calculate the add, sub, mul and divide but I'm not sure how to properly use the sscanf function (if I am not using it properly) or if there is another way using a function like strtok to properly parse the parenthesis and the minus signs. Any kind help?

  Read the article

• JRuby and JVM Languages at JavaOne!

  - by Yolande Poirier

  "My goal with my talks at JavaOne is to teach what is happening at the JVM level and below so people understand better where we are going" explains Charles Nutter, Jruby project lead. In this interview, Charles shared the JRuby features he presented at the JVM Language Summit. They include foreign function interface (FFI), IO layer, character transcoding, regular expressions, compilers, coroutines, and more.  At JavaOne, he will be presenting:  Going Native: Bringing FFI to the JVM The Java Native Runtime (JNR) is a high-speed foreign function interface (FFI) for calling native code from Java without ever writing a line of C. Based on the success of JNR, JDK Enhancement Proposal (JEP) 191 will bring FFI to OpenJDK as an internal API.  The Emerging Languages Bowl: The Big League Challenge In this panel discussion, these emerging languages are portrayed by their respective champions, who explain how they may help your everyday life as a Java developer. Script Bowl 2014: The Battle Rages On In this contest, languages that run on the JVM, represented by their respective language experts, battle for most popular language status by showing off their new features. Audience members will also vote on a language that should not return in 2015. Returning from 2013 are language gurus representing Clojure, Groovy, JRuby, and Scala.

  Read the article

• Machine only responds to network requests from machines it is pinging

  - by ILikeFood

  I have two machines. WOPR: Ubuntu server edition 10.10 LTS 32 bit Adam Selene: Windows 7 home premium 64 bit / Ubuntu Desktop 10.10 LTS 64 bit I want to be able to SSH from Adam Selene to WOPR, so I connect them to the same network. Here's where things get weird. I cannot connect to WOPR in any way under normal circumstances. But, if WOPR is pinging Adam, then it starts responding to ping requests, HTTP gets, and SSH tunnels. I'm an amateur, and brand new to Ubuntu server, so I suspect there's a misconfiguration somewhere, but there's an off chance it's a bug in the OS. Does anyone know what might cause this behavior? Thanks a lot!

  Read the article

• How to troubleshoot ping request time out

  - by user28317

  I have a Windows 7 and an XP machine connected to a NETGEAR wireless router. Both machines can log into the network and surf the web. Both are connecting wirelessly. I can ping the router from each machine and get a reply. I can ping each machine from the router and get a reply. But i cannot ping each machine from the other; getting a request time out. Subnet IP Addresses are 192.168.1.* Router =1; Win7 = 10; XP = 11; Firewall is currently off in both systems. Since i can ping from router im picking that not the problem anyway. If i try to ping from xp to win7 i get Request Timed Out. If i try to ping from Win7 to Xp i get destination host unreachable. What should i do now? Thanks

  Read the article

• Speed up file access on home network

  - by kurasa

  I have 2 PCs (Windows 7 Ultimate) and a Mac running Windows 7 using vmware fusion on my home network tied together using WRN1000 NETGEAR Router On one of the PC's I have a set of file (MYOB .myo). These use a data source to access the data in the files. Operations (reading,writing) to the .myo on the PC which hosts the files is fine but the other 2 it is painfully slow/unreliable and I am wondering what I can do to speed this up. Some ideas I have are 1. Turn off the Windows firewall on all the windows installations on the home network 2. Buy another router. Specifically a router which I can connect a USB flash drive on the back where I can put the .myo files and all the PC can access the files from the USB flash drive on the router (does this speed things up?) Any advice greatly appreciated on how I can speed up this access to data

  Read the article

• FreeBSD after motherboard replacement; should I have any concerns?

  - by cc

  So after three years my motherboard (Asus M2N-0MX) has died off. As I go shopping for i's replacement tomorrow I have a concern about the data that I currently have on the drives wtihin. I'm currently running BSD 6.2, and am wondering if there would be any concern with installing a new OS on that system, would it be better to jsut install the latest BSD version, and are their any pitfalls that I should watch for to make sure I don't end up losing 750gb's of data. The setup consists of the following(to the best of my knowledge): Pioneer DVD drive 3ware RAID card four 250gb SATA drives in RAID 5 config thanks to anyone that can offer some advice, or just to confirm if I am over thinking things.

  Read the article

• How can I find which "command" corresponds to opening a gnome-panel menu, for use in a keyboard shortcut?

  - by Ryan Jendoubi

  There are many questions and answers here and around the web on setting basic keyboard shortcuts in GNOME. Most of them are either for launching applications, or Compiz settings, or for changing defaults for other things for which Ubuntu provides defaults shortcuts. What I want to know though is how to refer to a gnome-panel menu item in a custom keyboard shortcut. I'm using Ubuntu 11.10 with GNOME Classic, and the old GNOME 2 / Ubuntu 10.04 keyboard shortcuts for the main menus (Alt-F1) and the "Me Menu" (Super+S) don't seem to work. So my question is two-fold. Primarily I'd like to know how to set those shortcuts. But a second-order question is how I could have found this out myself: is there some program I can use to see what signals or commands are fired off when I click on various things, in this case gnome-panel menu items? I'm interested in the broader question because I've sometimes wanted to set shortcuts for specific menus or menu items in GNOME 2, so a way to find out what command I need there would be useful. Give a man a rod, as they say :-) I've had a look at a good lot of keyboard shortcut and menu related items here to no avail. One somewhat relevant question is this one, but it's just a "how do I do it" question, and applies to Unity, not GNOME, although it would be great if whatever investigatory method answers this question might also apply under different desktops, like Unity. The answer to this question is essentially how I was doing it in 10.04 / GNOME 2, although the questioner's query isn't exactly addressed - how to get directly to "Broadcast" with a key combination. Again, it would be great if an answer delving into how such menus work and how they interact with the rest of the system would be applicable to pinpoint menu items.

  Read the article

• DB auto failover in c# does not work when the principal server physically goes offline

  - by user62521

  I'm setting up DB auto failover in C# with SQL Server 2008 and I have a 'high safety with automatic failover mirror' using a witness setup and my connection string looks like "Server=tcp:DC01; Failover Partner=tcp:DC02; database=dbname; uid=sewebsite;pwd=somerndpwd;Connect Timeout=10;Pooling=True;" During testing, when I turn off the SQL Server service on the principal server the auto failover works like a charm, but if I take the principal server offline (by shutting down the server or killing the network card) auto failover does not work and my website just times out. I found this article where the second last post suggests that its because we are using named pipes which does not work when the principal goes offline, but we force TCP in our connection string. What am I missing to get this DB auto failover working?

  Read the article

• Windows 7 just restarts, no BSOD, shows "Event ID 14 volsnap"

  - by Mdc007

  My Windows 7 just restarts without giving me a BSOD. When it reboots, it will hang sometimes and you have to let it rest. Sometimes it will print a message saying that Hal.dll is missing or corrupt. When it does restart I can't run a backup or a clone drive – it comes up with constant errors. I tried to run chkdsk – it says everything's clean. What is really puzzling is SyncToy on a different drive hangs half way through and won't run either. Machine: OCZ SSD Agility 2 for C drive SATA HDD for programs, documents on D drive MSI AMD 880 chipset Event viewer says something about critical power failure I/O operations and "Event ID 14 volsnap" – but that is just telling me the computer powered off which I already know.

  Read the article

< Previous Page | 326 327 328 329 330 331 332 333 334 335 336 337  | Next Page >