Search Results

Search found 27229 results on 1090 pages for 'default aspx'.

Page 331/1090 | < Previous Page | 327 328 329 330 331 332 333 334 335 336 337 338  | Next Page >

  • network will not work properly after having run TCP optimizer, but safe mode settings work perfectly. how to restore?

    - by michele
    I was experiencing some issues with my connection while playing online and I tried to optimize it by running TCP optimizer on my PC (Windows 7 64bit professional). I thought maybe the situation could improve. but it didn't. actually, I now get an extremely slow page loading time, probably due to a very low RWIN value of 1024. I understand that Windows 7 has a system to automatically adjust the RWIN value when needed. The setting from netsh is "normal" so I guess something else must be wrong. I tried every automatic tool out there to restore Windows' default values, but I had no success. I currently have what should be labeled as "default values" for everything TCP Optimizer initially changed, but the problem persists. The thing is, I just found out that running Windows in safe mode SOLVES the problem completely. The problem is that as soon as I reboot, I get the same issue all over again. So my question is: is there a way to use SAFE MODE network settings in NORMAL mode?

    Read the article

  • Linux VLAN Bridge

    - by raspi
    I have home network with VLANs, one for LAN, one for WLAN and one for internet. I'd like to use bridging so that instead of configuring these same VLANs to every machine, they had own VLAN ID and bridges were LAN, WLAN and internet. I've tried it but for some reason keep-alive/ttl seems to get broken because SSH sessions etc suddenly disconnects. We have this same setup working in workplace for 4+ years with 100+ customers but it's custom firewall/router hardware so accessing it is impossible. I know that it runs Linux. So what is Debian/Ubuntu default network settings doing wrong or is it just NIC driver/hw problem? I've tried to mess araund with ttl etc settings without any luck. The bad stuff is happening in the bridge because current VLAN-only setup works fine. interfaces: auto lo iface lo inet loopback # The primary network interface allow-hotplug eth0 allow-hotplug eth1 iface eth0 inet static iface eth1 inet static auto vlan111 auto vlan222 auto vlan333 auto vlan444 auto br0 auto br1 auto br2 # LAN iface vlan111 inet static vlan_raw_device eth0 # WLAN iface vlan222 inet static vlan_raw_device eth0 # ADSL Modem iface vlan333 inet static vlan_raw_device eth1 # Internet iface vlan444 inet static vlan_raw_device eth0 # LAN bridge iface br0 inet static address 192.168.0.1 netmask 255.255.255.0 bridge_ports eth0.111 bridge_stp on # Internet bridge iface br1 inet static address x.x.x.x netmask x.x.x.x gateway x.x.x.x bridge_ports eth1.333 eth0.444 bridge_stp on post-up iptables -t nat -A POSTROUTING -o br1 -j MASQUERADE pre-down iptables -t nat -D POSTROUTING -o br1 -j MASQUERADE # WLAN bridge iface br2 inet static address 192.168.1.1 netmask 255.255.255.0 bridge_ports eth0.222 bridge_stp on Sysctl: net.ipv4.conf.default.forwarding=1

    Read the article

  • Why does Google Chrome ignore "last_known_google_url" property in "Local State" file?

    - by Peter Sivák
    I want to force my Google Chrome web browser (version 21.0.1180.89, 64-bit) to use non-localized search (thus google in english) through address bar, using the default Google search engine. To achieve that, I have to change value of the property last_known_google_url to https://www.google.com/?hl=en& in Local State file (for instance on Linux, the full path to the file is ~/.config/google-chrome/Local State). In that file, there should be the property: "browser": { "last_known_google_url": but it is not. Even if I add there the property, it has no impact on search - Google Chrome does not use the property and still searches in localized version. Another option is to put the property to Preferences file (for instance on Linux, the full path to the file is ~/.config/google-chrome/Default/Preferences) - which works perfectly when I start Google Chrome and do some search - but just after that, the property (actually the whole Preferences file) is overriden, so "the most important" trailing part ?hl=en& of the property value is removed - and without it, the non-localized search does not work anymore. Why does Google Chrome ignore last_known_google_url property in Local State file?

    Read the article

  • Varnish returning 503, FetchError (could not get storage)

    - by Archan
    On the current setup we're running into a problem with Varnish, we're running a CentOS 5.7 x86_64 xenpv, with Cpanel WHM, hosted at VPS.net. Sometimes we will recieve a Guru Meditation from Varnish, and when we look in the varnishlog with the following command varnishlog -d -c -m TxStatus:503 it returns output similar to the following: 15 VCL_call c recv 15 VCL_acl c NO_MATCH devs 15 VCL_return c pass 15 VCL_call c hash 15 Hash c **** 15 Hash c ************* 15 VCL_return c hash 15 VCL_call c pass pass 15 Backend c 12 default default 15 TTL c 1835862523 RFC 0 -1 -1 1332454056 0 1332454055 375007920 0 15 VCL_call c fetch hit_for_pass 15 ObjProtocol c HTTP/1.1 15 ObjResponse c OK 15 ObjHeader c Date: Thu, 22 Mar 2012 22:07:35 GMT 15 ObjHeader c Server: Apache/2.2.21 (Unix) mod_ssl/2.2.21 OpenSSL/0.9.8e-fips-rhel5 mod_bwlimited/1.4 mod_fcgid/2.3.6 15 ObjHeader c X-Powered-By: PHP/5.3.9 15 ObjHeader c Expires: Thu, 19 Nov 1981 08:52:00 GMT 15 ObjHeader c Cache-Control: no-store, no-cache, must-revalidate, post-check=0, pre-check=0 15 ObjHeader c Pragma: no-cache 15 ObjHeader c Content-Type: text/html; charset=utf-8 15 ObjHeader c X-Cacheable: NO:Cache-Control=private 15 FetchError c chunked read_error: 12 (Could not get storage) 15 VCL_call c error deliver 15 VCL_call c deliver deliver As far as I have could gather, we could try increasing the nuke_limit, but currently we have a nuke_limit of 500, and when running varnishstat -1 -f n_lru_nuked we "only" get a total of 1031, even though we have seen the error happen on several pages. When we then run top to see how much memory Varnish is using, it only shows that it is using 763m, although we've set it to be allowed to use 1200m. Any ideas of what the problem can be?

    Read the article

  • Network speed between a VM and another machine which is not residing on the same host, is 11MB/s at most

    - by Henno
    Problem Network speed between a VM and another machine which is not residing on the same host, is 11MB/s at most. Topology Facts ESXi5 version is 5.0.0.504890 VM has the latest Vmware Tools installed VM is using E1000 network driver Physical box has Win Srv 2008 R2 as the OS CrystalDiskMark says the drive on physical box can read/write 100MB/s vCenter is another vm on esx both vm and physical box are showing 1Gbps link speed Configuration Networking shows vmnic0 as 1000 Full NTttcp is a client/server tool from Microsoft for measuring pure network throughput Here's what I've done so far: Test1: VM is running Filezilla FTP Server (default settings, one user account made) Physical box is running Filezilla FTP Client (default settings) Physical box is uploading a big file to FTP server Transfer speed (as observed by Windows Task Manager on both machines): ~11MB/s (bad) Physical box is downloading that file from FTP server Transfer speed (as observed by Windows Task Manager on both machines): still ~11MB/s (bad) Could it be disk performance issue? Test2: Physical box is running ntttcpr.exe -a 6 -m 6,0,VM_IP_ADDRESS VM is running ntttcps.exe -a 6 -m 6,0,PHY_BOX_IP_ADDRESS Transfer speed (as observed by Windows Task Manager on both machines): ~11MB/s (bad) Could it be switch performance issue? Test3: physical box is running vSphere Client I open Summary Storage datastore Browse Datastore... from physical box and upload a file to datastore Transfer speed (as observed by Windows Task Manager on physical box): ~26-36MB/s (good) Could it be a vm specific issue? Test4: Installed ntttcp to another vm on the same esx server Measured network performance between vms on the same esx server with NTttcp Transfer speed (as observed by Windows Task Manager on physical box): ~90-120MB/s (excellent :) Test5: I have another esx server on the same site, connecting to the same datastore and same switch. Those two ESX servers have both 2 NICs. One NIC goes to switch while the other goes directly to the other ESX server. vMotioned one of the testing vms off to the other ESX host Measured network performance between vms on different esx servers with NTttcp Transfer speed (as observed by Windows Task Manager on physical box): ~11MB/s (bad) While I'm aware of these: ESXi 4.1 slow file transfer ESXi 5 network performance is slow Debian Etch and ESXi slow network speeds VMWare ESXi slow file copy to guest they did not help (or I must have been missed something)

    Read the article

  • Use bootable vhd with Virtualbox

    - by user18151
    Hello, I want to create a bootable Windows 7 vhd using the steps mentioned at: http://www.microsoft.com/downloads/details.aspx?FamilyID=80ede31d-3509-407b-a896-0beea8705589&displaylang=en However, I wanted to know if I will be able to access the vhd using Virtualbox too. I intend to install VS2008 in the VM and use it in Virtualbox when doing quick work and on native hardware when doing a lot of work. I don't want to mess up my actual Win7 installation with VS2008 dev work.

    Read the article

  • Setting up SSL on JBoss 5

    - by socal_javaguy
    How can I enable SSL on JBoss 5 on a Linux (Red Hat - Fedora 8) box? What I've done so far is: (1) Create a test keystore. (2) Placed the newly generated server.keystore in $JBOSS_HOME/server/default/conf (3) Make the following change in the server.xml in $JBOSS_HOME/server/default/deploy/jbossweb.sar to include this: <!-- SSL/TLS Connector configuration using the admin devl guide keystore --> <Connector protocol="HTTP/1.1" SSLEnabled="true" port="8443" address="${jboss.bind.address}" scheme="https" secure="true" clientAuth="false" keystoreFile="${jboss.server.home.dir}/conf/server.keystore" keystorePass="mypassword" sslProtocol = "TLS" /> (4) The problem is that when JBoss starts it logs this exception (during start-up) (but I am still able to view everything under http://localhost:8080/): 03:59:54,780 ERROR [Http11Protocol] Error initializing endpoint java.io.IOException: Cannot recover key at org.apache.tomcat.util.net.jsse.JSSESocketFactory.init(JSSESocketFactory.java:456) at org.apache.tomcat.util.net.jsse.JSSESocketFactory.createSocket(JSSESocketFactory.java:139) at org.apache.tomcat.util.net.JIoEndpoint.init(JIoEndpoint.java:498) at org.apache.coyote.http11.Http11Protocol.init(Http11Protocol.java:175) at org.apache.catalina.connector.Connector.initialize(Connector.java:1029) at org.apache.catalina.core.StandardService.initialize(StandardService.java:683) at org.apache.catalina.core.StandardServer.initialize(StandardServer.java:821) at org.jboss.web.tomcat.service.deployers.TomcatService.startService(TomcatService.java:313) I do know that's there's more to be done to enable full SSL client authentication....

    Read the article

  • Show Mail Control Panel item from Outlook 2010 (32-bit)on Windows 2008R2 Terminal Server

    - by Mischa
    Hi I try to show the Mail Control Panel item in Windows 2008 R2. I only type the Name "Mail" in to the "Show only specified Contol Panel items Properties" in the Group Policy. In Windows 2008 R2 that doesn't work and theres no item in the Control Panel to configure Outlook 2010 Profiles. I already tried with: Mail and Mail(32-bit). I didn't find the suitable entry on on the side: http://msdn.microsoft.com/en-us/library/ee330741%28VS.85%29.aspx# Kind regards Mischa

    Read the article

  • Forcing IE8 Standards Mode with FEATURE_BROWSER_EMULATION

    - by earls
    I'm doing this: http://blogs.msdn.com/b/ie/archive/2009/03/10/more-ie8-extensibility-improvements.aspx But it's not working. I have "iexplore.exe" set to 8888 (decimal mode) under MACHINE, but it's still coming up documentMode = 5. I thought 8888 was suppose to force IE8 Standards Mode whether you have a doctype or not. What is going on?

    Read the article

  • This .mpg video clip doesn't play well

    - by Roey
    I've installed K-lite mega codec pack v6.9.0 with playback essentials without player. My default and only media player is windows media player. here are the clip's media info: General Complete name : D:\Users\Roey\Downloads\B384MV.mpg Format : MPEG-PS File size : 273 MiB Duration : 4mn 59s Overall bit rate : 7 643 Kbps Video ID : 224 (0xE0) Format : MPEG Video Format version : Version 2 Format profile : Main@High Format settings, BVOP : No Format settings, Matrix : Default Format settings, GOP : M=1, N=15 Duration : 4mn 57s Bit rate mode : Variable Bit rate : 7 363 Kbps Nominal bit rate : 9 000 Kbps Width : 1 920 pixels Height : 1 080 pixels Display aspect ratio : 16:9 Frame rate : 25.000 fps Color space : YUV Chroma subsampling : 4:2:0 Bit depth : 8 bits Scan type : Progressive Compression mode : Lossy Bits/(Pixel*Frame) : 0.142 Stream size : 261 MiB (96%) Audio ID : 192 (0xC0) Format : MPEG Audio Format version : Version 1 Format profile : Layer 3 Mode : Joint stereo Duration : 4mn 59s Bit rate mode : Constant Bit rate : 128 Kbps Channel(s) : 2 channels Sampling rate : 44.1 KHz Compression mode : Lossy Stream size : 4.56 MiB (2%) Menu When I play it there is no sound (just a little "kahhhh" noise every 10-20 seconds) and the frames are moving very slow - it "jumps" frames. A blue tray icon [FFa] "ffdshow audio decoder" pops with the following details: Input:MP3, stereo, 44100 Hz (libavocodec) Output:PCM, stereo, 44100 Hz, 16-bit integer Any help will be much appreciated. Thanks

    Read the article

  • Unable to access certain websites from a computer

    - by matt74tm
    One of the desktop computers in my office is unable to access some particular websites. We've tried from Chrome, IE, Firefox, but no luck. eg: http://spsims.wto.org/ -> click on "Regular notifications" On the affected computer, every browser times out after the click. Whereas it should redirect the user to http://spsims.wto.org/web/pages/search/notification/regular/Search.aspx How can I diagnose this further? This is a Windows XP machine.

    Read the article

  • Serve a specific set of error pages for different subdirectories

    - by navitronic
    I am currently trying to setup 2 different sets of Error documents for separate folders within a website. I have 2 folders within the root of a site: demo/ live/ Any requests that return 404's or 403's within the demo folder needs to load one set of pages for the Apache errordocuments, eg. ErrorDocument 404 /statuses/demo-404.html ErrorDocument 403 /statuses/demo-403.html And the live needs to go to similarly name files. ErrorDocument 404 /statuses/live-404.html ErrorDocument 403 /statuses/live-403.html So far I have tried placing an .htaccess file in both directories with the ErrorDocument directives setup pointing to the specific files, the 404 works fine and references the correct page. However, the 403s do not work and revert to the server default when trying to access forbidden folders within the demo directory, the logs indicate the following: [Wed Jun 16 04:47:44 2010] [crit] [client 115.64.131.144] (13)Permission denied: /home/abstract/public_html/demo/xxx/.htaccess pcfg_openfile: unable to check htaccess file, ensure it is readable Is this correct? Would apache revert to default because it is trying to look for the htaccess in a folder it doesn't have permission in? Why wouldn't it work it's way back through the folder tree? Can I make it do this?

    Read the article

  • problems installing mysql and phpmyadmin to localhost

    - by Joel
    Hi guys, I know there have been many similar questions, but as far as I can tell, most of the other people have gotten further than I have... I'm trying to get a WAMP setup happening. I've got PHP and Apache running and talking to each other. PHP is in c:\PHP Apache is in it's default program files folder. mySQL is in it's default install location. I have localhost setup at D:\public_html\ I'm able to navigate to localhost and see html and php files. But I have a simple mySQL test file: <?php // hostname or ip of server (for local testing, localhost should work) $dbServer='localhost'; // username and password to log onto db server $dbUser='root'; $dbPass=''; // name of database $dbName='test'; $link = mysql_connect("$dbServer", "$dbUser", "$dbPass") or die("Could not connect"); print "Connected successfully<br>"; mysql_select_db("$dbName") or die("Could not select database"); print "Database selected successfully<br>"; // close connection mysql_close($link); ?> When I try and open this, I get "could not connect" Now, I haven't even created a database yet, because I can't log into mySQL with phpmyadmin-so I think I've done something wrong in my mySQL install because they aren't talking to each other. I guess my main question is how do I first create a database in mySQL to be sure I have even installed it correctly?

    Read the article

  • Apache Virtual host (SSL) Doc Root issue

    - by Steve Hamber
    I am having issues with the SSL document root of my vhosts configuration. Http sees to work fine and navigates to the root directory and publishes the page fine - DocumentRoot /var/www/html/websites/ssl.domain.co.uk/ (as specified in my vhost config) However, https seems to be looking for files in the main apache document root found further up the httpd.conf file, and is not being overwritten by the vhost config. (I assume that vhost config does overwrite the default doc root?). DocumentRoot: The directory out of which you will serve your documents. By default, all requests are taken from this directory, but symbolic links and aliases may be used to point to other locations. DocumentRoot "/var/www/html/websites/" Here is my config, I am quite a new Linux guy so any advise is appreciated on why this is happening!? NameVirtualHost *:80 NameVirtualHost *:443 <VirtualHost *:443> ServerAdmin root@localhost DocumentRoot /var/www/html/websites/https_domain.co.uk/ ServerName ssl.domain.co.uk ErrorLog /etc/httpd/logs/ssl.domain.co.uk/ssl.domain.co.uk-error_log CustomLog /etc/httpd/logs/ssl.domain.co.uk/ssl.domain.o.uk-access_log common SSLEngine on SSLOptions +StrictRequire SSLCertificateFile /var/www/ssl/ssl_domain_co_uk.crt SSLCertificateKeyFile /var/www/ssl/domain.co.uk.key SSLCACertificateFile /var/www/ssl/ssl_domain_co_uk.ca-bundle </VirtualHost> <VirtualHost *:80> ServerAdmin root@localhost DocumentRoot /var/www/html/websites/ssl.domain.co.uk/ ServerName ssl.domain.co.uk ErrorLog /etc/httpd/logs/ssl.domain.co.uk/ssl.domain.xo.uk-error_log CustomLog /etc/httpd/logs/ssl.domain.co.uk/ssl.domain.xo.uk-access_log common </VirtualHost>

    Read the article

  • issue in installing postgresql 9.3.4 on Windows server 2003 x64

    - by randydom
    Hello i really did all what i know to install the PostgreSQL 9.3.4 on my windows 2003 server x64, but i'm always stopped with this error : please see the error : http://oi57.tinypic.com/s4tb8i.jpg I really don't know what to do , if i click OK then when i go to the windows services list i don't find the PostgreSQL service so i can't Start the service . can any one please help me to install it correctly . PS: i've followed all steps in the : wiki.postgresql.org/wiki/Troubleshooting_Installation many thanks . here's the installer log * where i get " Failed to initialise the database cluster with initdb " : Called IsVistaOrNewer()... 'winmgmts' object initialized... Version:5.2 MajorVersion:5 Ensuring we can write to the data directory (using cacls): Executing batch file 'rad22ADE.bat'... processed dir: C:\Program Files\PostgreSQL\9.2\data Executing batch file 'rad22ADE.bat'... The files belonging to this database system will be owned by user "Administrator". This user must also own the server process. The database cluster will be initialized with locale "English_United States.1252". The default text search configuration will be set to "english". fixing permissions on existing directory C:/Program Files/PostgreSQL/9.2/data ... initdb: could not change permissions of directory "C:/Program Files/PostgreSQL/9.2/data": Permission denied Called Die(Failed to initialise the database cluster with initdb)... Failed to initialise the database cluster with initdb Script stderr: Program ended with an error exit code Error running cscript //NoLogo "C:\Program Files\PostgreSQL\9.2/installer/server/initcluster.vbs" "NT AUTHORITY\NetworkService" "postgres" "****" "C:\Program Files\PostgreSQL\9.2" "C:\Program Files\PostgreSQL\9.2\data" 5432 "DEFAULT" 0 : Program ended with an error exit code Problem running post-install step. Installation may not complete correctly The database cluster initialisation failed. Creating Uninstaller Creating uninstaller 25% Creating uninstaller 50% Creating uninstaller 75% Creating uninstaller 100% Installation completed Log finished 05/02/2014 at 04:04:04

    Read the article

  • SQL Error (1064) when importing data from SQL file

    - by mejpark
    I have a MySQL database, which was originally set up with the default latin1 character set and latin1_swedish_ci collation. I was using the database like this for sometime, until I noticed strange characters on my production web site, which is powered by a database exported from my development machine. At this point, I changed the default character set of the database and tables to utf8 and the collation to utf8_unicode_ci, converted the latin1 data inside each table to utf8 (using the 'convert data' option) and exported the database as a single SQL file using HeidiSQL. When the resulting SQL file is opened in Notepad++, several characters are rendered incorrectly. For example, en dashes (-) are displayed as – and e with accent (é) are displayed as é. I changed the encoding of the file from ANSI to UTF-8 (using the encoding menu option in Notepad++) and the offending characters are rendered correctly. I saved the new utf8-encoded SQL file and attempted to import the contents into the MySQL database on my production server. The import process fails with following error: /* SQL Error (1064): You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '?# -------------------------------------------------------- # Host: ' at line 1 */ /* Error with snippets directory: The specified path was not found */ The head of the SQL file: # -------------------------------------------------------- # Host: 127.0.0.1 # Server version: 5.1.33-community # Server OS: Win32 # HeidiSQL version: 6.0.0.3773 # Date/time: 2011-04-20 09:48:36 # -------------------------------------------------------- It chokes on the first line of the file, which is commented out. Why is this happening? I didn't have a problem loading data from SQL files until I changed the character set and collation of the database. I came up with an ugly workaround to this problem by performing following steps: Export database as single SQL file using HeidiSQL Open resulting file in Notepad++ and convert from ANSI to UTF-8 encoding Create new empty file in Notepad++, paste in UTF-8 and save file normally What am I missing here?

    Read the article

  • background jobs and ssh connections

    - by petrelharp
    This question has come up quite a lot (really a lot), but I'm finding the answers to be generally incomplete. The general question is "Why does/doesn't my job get killed when I exit/kill ssh?", and here's what I've found. The first question is: How general is the following information? The following seems to be true for modern Debian linux, but I am missing some bits; and what do others need to know? All child processes, backgrounded or not of a shell opened over an ssh connection are killed with SIGHUP when the ssh connection is closed only if the huponexit option is set: run shopt huponexit to see if this is true. If huponexit is true, then you can use nohup or disown to dissociate the process from the shell so it does not get killed when you exit. If huponexit is false, which is the default on at least some linuxes these days, then backgrounded jobs will not be killed on normal logout. But even if huponexit is false, then if the ssh connection gets killed, or drops (different than normal logout), then backgrounded processes will still get killed. This can be avoided by disown or nohup as in (2). There is some distinction between (a) processes whose parent process is the terminal and (b) processes that have stdin, stdout, or stderr connected to the terminal. I don't know what happens to processes that are (a) and not (b), or vice versa. Final question: How can I avoid behavior (3)? In other words, by default in Debian backgrounded processes run along merrily by themselves after logout but not after the ssh connection is killed. I'd like the same thing to happen to processes regardless of whether the connection was closed normally or killed. Or, is this a bad idea?

    Read the article

  • Authenticate Teamcity against LDAP using StartTLS

    - by aseq
    I am running a 6.5 version of Teamcity on a Debian Squeeze server and I use OpenLDAP to authenticate users. I know I can use LDAPS to be able to use encrypted password authentication, however this has been deprecated by the OpenLDAP developers, see: http://www.openldap.org/faq/data/cache/605.html I would like to know if there is a way to configure LDAP authentication in Teamcity to use StartTLS on port 389. I can't find anything about it here: http://confluence.jetbrains.net/display/TCD65/LDAP+Integration Or here: http://therightstuff.de/2009/02/02/How-To-Set-Up-Secure-LDAP-Authentication-With-TeamCity.aspx

    Read the article

  • MacOS creates a new mount on AFP path calls

    - by jAndy
    Hi Folks, following scenario: In my webapp, my customers are using Firefox as target browser. They have the need to open afp:// folders via Javascript. To make a long story short, this really works. You need to setup Firefox with about:config and set the value network.protocol-handler.external.afp to true. What happens then, the operating system (OSX) takes care of that path and it correctly opens a Finder window. The problem: OSX does create a new mount every time. It cannot distinct between afp://host/path/111 and afp://host/path/222 for instance. Furthermore, even if the afp path is 100% identical a new mount is created. It looks like this is the default behavior from OSX regardless of Firefox. So, is there any chance I can tell OSX not to create a new mount for some sub directorys which should get access over afp:// ? update: It looks like, there are OSX applications which can change the default behavior for network protocols. So you can change "somewhere" which application OSX should call for a protocol. If that is true, wouldn't it be possible to create a script which just opens the local path without a afp:// prefix ? The question here is, where is that configuration (?) to tell OSX which application to use for specific protocol. Any help welcome!

    Read the article

  • How to test nginx proxy timeouts

    - by mkorszun
    Target: I would like to test all Nginx proxy timeout parameters in very simple scenario. My first approach was to create really simple HTTP server and put some timeouts: Between listen and accept to test proxy_connect_timeout Between accept and read to test proxy_send_timeout Between read and send to test proxy_read_timeout Test: 1) Server code (python): import socket import os import time import threading def http_resp(conn): conn.send("HTTP/1.1 200 OK\r\n") conn.send("Content-Length: 0\r\n") conn.send("Content-Type: text/xml\r\n\r\n\r\n") def do(conn, addr): print 'Connected by', addr print 'Sleeping before reading data...' time.sleep(0) # Set to test proxy_send_timeout data = conn.recv(1024) print 'Sleeping before sending data...' time.sleep(0) # Set to test proxy_read_timeout http_resp(conn) print 'End of data stream, closing connection' conn.close() def main(): s = socket.socket(socket.AF_INET, socket.SOCK_STREAM) s.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1) s.bind(('', int(os.environ['PORT']))) s.listen(1) print 'Sleeping before accept...' time.sleep(130) # Set to test proxy_connect_timeout while 1: conn, addr = s.accept() t = threading.Thread(target=do, args=(conn, addr)) t.start() if __name__ == "__main__": main() 2) Nginx configuration: I have extended Nginx default configuration by setting explicitly proxy_connect_timeout and adding proxy_pass pointing to my local HTTP server: location / { proxy_pass http://localhost:8888; proxy_connect_timeout 200; } 3) Observation: proxy_connect_timeout - Even though setting it to 200s and sleeping only 130s between listen and accept Nginx returns 504 after ~60s which might be because of the default proxy_read_timeout value. I do not understand how proxy_read_timeout could affect connection at so early stage (before accept). I would expect 200 here. Please explain! proxy_send_timeout - I am not sure if my approach to test proxy_send_timeout is correct - i think i still do not understand this parameter correctly. After all, delay between accept and read does not force proxy_send_timeout. proxy_read_timeout - it seems to be pretty straightforward. Setting delay between read and write does the job. So I guess my assumptions are wrong and probably I do not understand proxy_connect and proxy_send timeouts properly. Can some explain them to me using above test if possible (or modifying if required).

    Read the article

  • long access times and errors in iis application

    - by Jens Olsson
    Hi, I am having an issue with an IIS application (details of environment at the end of the message). The web site works great most of the time and I cannot reproduce any error in our test system. On the live system however with on averare of 5-15 requests per second I have a problem with that some requests (about 0.05%) will take over 300 seconds to complete. The other requests complete withing 5-10 seconds. It seem like if all the errornous requests end up with a Timer_EntityBody error in the error log. I have never seen this as an end user but I guess that they will receive some kind of error message. I am trying to find out what can be causing this errornous behaviour. Any ideas are welcome. I have read something about that there can be an MTU issue if ICMP and MTU protocols are blocked in the firewall. Does that sound reasonable? I have also read about updating to IIS 7 should do the trick. Does it sound reasonable? I think that the problem has another cause but I have no idea of what. I have tried running hte perormance monitor, monitoring for database locks and active transaction counts. I can see some of these in the perfmon log for the MSSQL server (another machine) for example: Active transactions is sometimes peaking and sometimes for long periods Lock waits per seconds is sometimes peaking Transactions per second is sometimes peaking Page IO Latch wait is sometimes peaking Lock wait time (ms) is sometimes peaking But I cannot see that any of these correlate to the errors in the IIS error log. On the IIS server machine I can also see with perfmon that some values peak a few times during a day: Request execution time Avg disk queue length I can neither see that any of these correlate to the errors in the IIS error log. In the below code I have anonymized by replacing some parts with HIDDEN The following can be seen in the access log 2010-10-01 08:35:05 W3SVC1301873091 **HIDDEN** POST /**HIDDEN**/Modules/BalanceModule.aspx - 80 - **HIDDEN** Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.1;+.NET+CLR+2.0.50727;+.NET+CLR+3.0.4506.2152;+.NET+CLR+3.5.30729;+.NET4.0C;+.NET4.0E) ASP.NET_SessionId=**HIDDEN** 400 0 64 0 2241 127799 At the same time the following can be seen in the error log: 2010-10-01 08:35:05 **HIDDEN** 1999 **HIDDEN** 80 HTTP/1.0 POST /**HIDDEN**/Modules/BalanceModule.aspx - 1301873091 Timer_EntityBody Test+Pool I can tell the following about the environment: Server: Windows Server 2003 x64 SP2 running on VMWare HTTP Server: IIS v6.0 with ASP.NET 2.0.50727 Antivirus: Trend Micro OfficeScan (Is it a good idea to have this on a server?)

    Read the article

  • How to access Windows Azure management portal from Linux/Ubuntu

    - by Zaar Hai
    Good day everyone! I have only Ubuntu/Debian machines in my office. I've registered for Windows Azure platform and try to enter their management portal (https://windows.azure.com/default.aspx), but it requires Microsoft Silverlight. I've tried installing latest Moonlight plugin availabing for Ubuntu 11.04, but without any success - after login I see blank page and nothing more (tried both firefox 7.0.1 and chromium-14). Does anyone know how to enter Microsoft Azure management portal from Ubuntu 11.04 or any other linux? Thank you, Zaar

    Read the article

  • Excel: Cell Value as Excel Document Metadata Property

    - by mjlefevre
    I know you can add custom Document Properties in Excel 2007. see: http://office.microsoft.com/en-us/excel/HA100475241033.aspx#5 But I thought there was a way to pull a value from a cell as a custom metadata property without code. Maybe I'm searching for it with the wrong terminology. Maybe it has to be done as a Named Range. I know this can be done. Anyone know how?

    Read the article

  • Problems with 5.1 digital out on Ubuntu 12.04

    - by user895319
    I've recently bought a new PC, installed Ubuntu and am now unable to get 5.1 digital sound working. Simple analogue stereo works fine on both the front and rear connectors. On my old box I connected the coax connection from my soundcard to my surround sound amplifier, set Settings-Sound to "Digital Stereo Duplex" and it worked. My old soundcard doesn't fit in my new machine so I'm using the built-in sound hardware. I'm connecting the combination output socket on the back of the PC via the same cable to my surround amp as before. The MB is an MSI Global H61M-P31 with an RealTek ALC887 sound chip. When I go to Settings-Sound I only see "Headphone Built-in Audio" and "Analogue Output Built-in Audio" - no digitial options. The output from aplay -l is: default Playback/recording through the PulseAudio sound server sysdefault:CARD=PCH HDA Intel PCH, ALC887-VD Analog Default Audio Device front:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog Front speakers surround40:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers dmix:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog Direct sample mixing device dsnoop:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog Direct sample snooping device hw:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog Direct hardware device without any conversions plughw:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog Hardware device with all software conversions While googling for ALC887 I've seen some references to "ALC887 -VD Analog" and some to "ALC887 -VD Digital". Does anyone know if I need to force it to chance mode somehow? It's worth mentioning that when I set the output to 5.1 digital surround in Windows 7 on the same machine I still don't get any sound so it's not a unique Linux problem. Thanks for any help.

    Read the article

< Previous Page | 327 328 329 330 331 332 333 334 335 336 337 338  | Next Page >