Search Results

Search found 17546 results on 702 pages for 'event notification'.

Page 331/702 | < Previous Page | 327 328 329 330 331 332 333 334 335 336 337 338  | Next Page >

• Linux software raid fails to include one device for one RAID1 array

  - by user1389890

  One of my four Linux software raid arrays drops one of its two devices when I reboot my system. The other three arrays work fine. I am running RAID1 on kernel version 2.6.32-5-amd64. Every time I reboot, /dev/md2 comes up with only one device. I can manually add the device by saying $ sudo mdadm /dev/md2 --add /dev/sdc1. This works fine, and mdadm confirms that the device has been re-added as follows: mdadm: re-added /dev/sdc1 After adding the device and and allowing the array time to resynch, this is what the output of $ cat /proc/mdstat looks like: Personalities : [raid1] md3 : active raid1 sda4[0] sdb4[1] 244186840 blocks super 1.2 [2/2] [UU] md2 : active raid1 sdc1[0] sdd1[1] 732574464 blocks [2/2] [UU] md1 : active raid1 sda3[0] sdb3[1] 722804416 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdb1[1] 6835520 blocks [2/2] [UU] unused devices: <none> Then after I reboot, this is what the output of $ cat /proc/mdstat looks like: Personalities : [raid1] md3 : active raid1 sda4[0] sdb4[1] 244186840 blocks super 1.2 [2/2] [UU] md2 : active raid1 sdd1[1] 732574464 blocks [2/1] [_U] md1 : active raid1 sda3[0] sdb3[1] 722804416 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdb1[1] 6835520 blocks [2/2] [UU] unused devices: <none> During reboot, here is the output of $ sudo cat /var/log/syslog | grep mdadm : Jun 22 19:00:08 rook mdadm[1709]: RebuildFinished event detected on md device /dev/md2 Jun 22 19:00:08 rook mdadm[1709]: SpareActive event detected on md device /dev/md2, component device /dev/sdc1 Jun 22 19:00:20 rook kernel: [ 7819.446412] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446415] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446782] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446785] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.515844] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.515847] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.606829] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.606832] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855616] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855620] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855950] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855952] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8027.962169] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8027.962171] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8028.054365] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8028.054368] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.588662] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.588664] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.601990] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.601991] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.602693] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.602695] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.605981] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.605983] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.606138] mdadm: sending ioctl 800c0910 to a partition! Jun 22 19:10:23 rook kernel: [ 9.606139] mdadm: sending ioctl 800c0910 to a partition! Jun 22 19:10:48 rook mdadm[1737]: DegradedArray event detected on md device /dev/md2 Here is the mdadm.conf file: ARRAY /dev/md0 metadata=0.90 UUID=92121d42:37f46b82:926983e9:7d8aad9b ARRAY /dev/md1 metadata=0.90 UUID=9c1bafc3:1762d51d:c1ae3c29:66348110 ARRAY /dev/md2 metadata=0.90 UUID=98cea6ca:25b5f305:49e8ec88:e84bc7f0 ARRAY /dev/md3 metadata=1.2 name=rook:3 UUID=ca3fce37:95d49a09:badd0ddc:b63a4792 I also ran $ sudo smartctl -t long /dev/sdc and no hardware issues were detected. As long as I do not reboot, /dev/md2 seems to work fine. Does anyone have any suggestions? Here is the output of $ sudo mdadm -E /dev/sdc1 after re-adding the device and letting it resync: /dev/sdc1: Magic : a92b4efc Version : 0.90.00 UUID : 98cea6ca:25b5f305:49e8ec88:e84bc7f0 (local to host rook) Creation Time : Sun Jul 13 08:05:55 2008 Raid Level : raid1 Used Dev Size : 732574464 (698.64 GiB 750.16 GB) Array Size : 732574464 (698.64 GiB 750.16 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Update Time : Mon Jun 24 07:42:49 2013 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 Checksum : 5fd6cc13 - correct Events : 180998 Number Major Minor RaidDevice State this 0 8 33 0 active sync /dev/sdc1 0 0 8 33 0 active sync /dev/sdc1 1 1 8 49 1 active sync /dev/sdd1 Here is the output of $ sudo mdadm -D /dev/md2 after re-adding the device and letting it resync: /dev/md2: Version : 0.90 Creation Time : Sun Jul 13 08:05:55 2008 Raid Level : raid1 Array Size : 732574464 (698.64 GiB 750.16 GB) Used Dev Size : 732574464 (698.64 GiB 750.16 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Mon Jun 24 07:42:49 2013 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : 98cea6ca:25b5f305:49e8ec88:e84bc7f0 (local to host rook) Events : 0.180998 Number Major Minor RaidDevice State 0 8 33 0 active sync /dev/sdc1 1 8 49 1 active sync /dev/sdd1

  Read the article

• Upon reboot, Linux software raid fails to include one device of a RAID1 array

  - by user1389890

  One of my four Linux software raid arrays drops one of its two devices when I reboot my system. The other three arrays work fine. I am running RAID1 on kernel version 2.6.32-5-amd64 (Debian Squeeze). Every time I reboot, /dev/md2 comes up with only one device. I can manually add the device by saying $ sudo mdadm /dev/md2 --add /dev/sdc1. This works fine, and mdadm confirms that the device has been re-added as follows: mdadm: re-added /dev/sdc1 After adding the device and allowing the array time to resynch, this is what the output of $ cat /proc/mdstat looks like: Personalities : [raid1] md3 : active raid1 sda4[0] sdb4[1] 244186840 blocks super 1.2 [2/2] [UU] md2 : active raid1 sdc1[0] sdd1[1] 732574464 blocks [2/2] [UU] md1 : active raid1 sda3[0] sdb3[1] 722804416 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdb1[1] 6835520 blocks [2/2] [UU] unused devices: <none> Then after I reboot, this is what the output of $ cat /proc/mdstat looks like: Personalities : [raid1] md3 : active raid1 sda4[0] sdb4[1] 244186840 blocks super 1.2 [2/2] [UU] md2 : active raid1 sdd1[1] 732574464 blocks [2/1] [_U] md1 : active raid1 sda3[0] sdb3[1] 722804416 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdb1[1] 6835520 blocks [2/2] [UU] unused devices: <none> During reboot, here is the output of $ sudo cat /var/log/syslog | grep mdadm : Jun 22 19:00:08 rook mdadm[1709]: RebuildFinished event detected on md device /dev/md2 Jun 22 19:00:08 rook mdadm[1709]: SpareActive event detected on md device /dev/md2, component device /dev/sdc1 Jun 22 19:00:20 rook kernel: [ 7819.446412] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446415] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446782] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446785] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.515844] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.515847] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.606829] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.606832] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855616] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855620] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855950] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855952] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8027.962169] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8027.962171] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8028.054365] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8028.054368] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.588662] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.588664] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.601990] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.601991] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.602693] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.602695] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.605981] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.605983] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.606138] mdadm: sending ioctl 800c0910 to a partition! Jun 22 19:10:23 rook kernel: [ 9.606139] mdadm: sending ioctl 800c0910 to a partition! Jun 22 19:10:48 rook mdadm[1737]: DegradedArray event detected on md device /dev/md2 Here is the result of $ cat /etc/mdadm/mdadm.conf: ARRAY /dev/md0 metadata=0.90 UUID=92121d42:37f46b82:926983e9:7d8aad9b ARRAY /dev/md1 metadata=0.90 UUID=9c1bafc3:1762d51d:c1ae3c29:66348110 ARRAY /dev/md2 metadata=0.90 UUID=98cea6ca:25b5f305:49e8ec88:e84bc7f0 ARRAY /dev/md3 metadata=1.2 name=rook:3 UUID=ca3fce37:95d49a09:badd0ddc:b63a4792 Here is the output of $ sudo mdadm -E /dev/sdc1 after re-adding the device and letting it resync: /dev/sdc1: Magic : a92b4efc Version : 0.90.00 UUID : 98cea6ca:25b5f305:49e8ec88:e84bc7f0 (local to host rook) Creation Time : Sun Jul 13 08:05:55 2008 Raid Level : raid1 Used Dev Size : 732574464 (698.64 GiB 750.16 GB) Array Size : 732574464 (698.64 GiB 750.16 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Update Time : Mon Jun 24 07:42:49 2013 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 Checksum : 5fd6cc13 - correct Events : 180998 Number Major Minor RaidDevice State this 0 8 33 0 active sync /dev/sdc1 0 0 8 33 0 active sync /dev/sdc1 1 1 8 49 1 active sync /dev/sdd1 Here is the output of $ sudo mdadm -D /dev/md2 after re-adding the device and letting it resync: /dev/md2: Version : 0.90 Creation Time : Sun Jul 13 08:05:55 2008 Raid Level : raid1 Array Size : 732574464 (698.64 GiB 750.16 GB) Used Dev Size : 732574464 (698.64 GiB 750.16 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Mon Jun 24 07:42:49 2013 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : 98cea6ca:25b5f305:49e8ec88:e84bc7f0 (local to host rook) Events : 0.180998 Number Major Minor RaidDevice State 0 8 33 0 active sync /dev/sdc1 1 8 49 1 active sync /dev/sdd1 I also ran $ sudo smartctl -t long /dev/sdc and no hardware issues were detected. As long as I do not reboot, /dev/md2 seems to work fine. Does anyone have any suggestions?

  Read the article

• WPF Login Verification Using Active Directory

  - by psheriff

  Back in October of 2009 I created a WPF login screen (Figure 1) that just showed how to create the layout for a login screen. That one sample is probably the most downloaded sample we have. So in this blog post, I thought I would update that screen and also hook it up to show how to authenticate your user against Active Directory. Figure 1: Original WPF Login Screen I have updated not only the code behind for this login screen, but also the look and feel as shown in Figure 2. Figure 2: An Updated WPF Login Screen The UI To create the UI for this login screen you can refer to my October of 2009 blog post to see how to create the borderless window. You can then look at the sample code to see how I created the linear gradient brush for the background. There are just a few differences in this screen compared to the old version. First, I changed the key image and instead of using words for the Cancel and Login buttons, I used some icons. Secondly I added a text box to hold the Domain name that you wish to authenticate against. This text box is automatically filled in if you are connected to a network. In the Window_Loaded event procedure of the winLogin window you can retrieve the user’s domain name from the Environment.UserDomainName property. For example: txtDomain.Text = Environment.UserDomainName The ADHelper Class Instead of coding the call to authenticate the user directly in the login screen I created an ADHelper class. This will make it easier if you want to add additional AD calls in the future. The ADHelper class contains just one method at this time called AuthenticateUser. This method authenticates a user name and password against the specified domain. The login screen will gather the credentials from the user such as their user name and password, and also the domain name to authenticate against. To use this ADHelper class you will need to add a reference to the System.DirectoryServices.dll in .NET. The AuthenticateUser Method In order to authenticate a user against your Active Directory you will need to supply a valid LDAP path string to the constructor of the DirectoryEntry class. The LDAP path string will be in the format LDAP://DomainName. You will also pass in the user name and password to the constructor of the DirectoryEntry class as well. With a DirectoryEntry object populated with this LDAP path string, the user name and password you will now pass this object to the constructor of a DirectorySearcher object. You then perform the FindOne method on the DirectorySearcher object. If the DirectorySearcher object returns a SearchResult then the credentials supplied are valid. If the credentials are not valid on the Active Directory then an exception is thrown. C#public bool AuthenticateUser(string domainName, string userName,  string password){  bool ret = false;   try  {    DirectoryEntry de = new DirectoryEntry("LDAP://" + domainName,                                           userName, password);    DirectorySearcher dsearch = new DirectorySearcher(de);    SearchResult results = null;     results = dsearch.FindOne();     ret = true;  }  catch  {    ret = false;  }   return ret;} Visual Basic Public Function AuthenticateUser(ByVal domainName As String, _ ByVal userName As String, ByVal password As String) As Boolean  Dim ret As Boolean = False   Try    Dim de As New DirectoryEntry("LDAP://" & domainName, _                                 userName, password)    Dim dsearch As New DirectorySearcher(de)    Dim results As SearchResult = Nothing     results = dsearch.FindOne()     ret = True  Catch    ret = False  End Try   Return retEnd Function In the Click event procedure under the Login button you will find the following code that will validate the credentials that the user types into the login window. C#private void btnLogin_Click(object sender, RoutedEventArgs e){  ADHelper ad = new ADHelper();   if(ad.AuthenticateUser(txtDomain.Text,         txtUserName.Text, txtPassword.Password))    DialogResult = true;  else    MessageBox.Show("Unable to Authenticate Using the                      Supplied Credentials");} Visual BasicPrivate Sub btnLogin_Click(ByVal sender As Object, _ ByVal e As RoutedEventArgs)  Dim ad As New ADHelper()   If ad.AuthenticateUser(txtDomain.Text, txtUserName.Text, _                         txtPassword.Password) Then    DialogResult = True  Else    MessageBox.Show("Unable to Authenticate Using the                      Supplied Credentials")  End IfEnd Sub Displaying the Login Screen At some point when your application launches, you will need to display your login screen modally. Below is the code that you would call to display the login form (named winLogin in my sample application). This code is called from the main application form, and thus the owner of the login screen is set to “this”. You then call the ShowDialog method on the login screen to have this form displayed modally. After the user clicks on one of the two buttons you need to check to see what the DialogResult property was set to. The DialogResult property is a nullable type and thus you first need to check to see if the value has been set. C# private void DisplayLoginScreen(){  winLogin win = new winLogin();   win.Owner = this;  win.ShowDialog();  if (win.DialogResult.HasValue && win.DialogResult.Value)    MessageBox.Show("User Logged In");  else    this.Close();} Visual Basic Private Sub DisplayLoginScreen()  Dim win As New winLogin()   win.Owner = Me  win.ShowDialog()  If win.DialogResult.HasValue And win.DialogResult.Value Then    MessageBox.Show("User Logged In")  Else    Me.Close()  End IfEnd Sub Summary Creating a nice looking login screen is fairly simple to do in WPF. Using the Active Directory services from a WPF application should make your desktop programming task easier as you do not need to create your own user authentication system. I hope this article gave you some ideas on how to create a login screen in WPF. NOTE: You can download the complete sample code for this blog entry at my website: http://www.pdsa.com/downloads. Click on Tips & Tricks, then select 'WPF Login Verification Using Active Directory' from the drop down list. Good Luck with your Coding,Paul Sheriff ** SPECIAL OFFER FOR MY BLOG READERS **We frequently offer a FREE gift for readers of my blog. Visit http://www.pdsa.com/Event/Blog for your FREE gift!

  Read the article

• HTML5 Form Validation

  - by Stephen.Walther

  The latest versions of Google Chrome (16+), Mozilla Firefox (8+), and Internet Explorer (10+) all support HTML5 client-side validation. It is time to take HTML5 validation seriously. The purpose of the blog post is to describe how you can take advantage of HTML5 client-side validation regardless of the type of application that you are building. You learn how to use the HTML5 validation attributes, how to perform custom validation using the JavaScript validation constraint API, and how to simulate HTML5 validation on older browsers by taking advantage of a jQuery plugin. Finally, we discuss the security issues related to using client-side validation. Using Client-Side Validation Attributes The HTML5 specification discusses several attributes which you can use with INPUT elements to perform client-side validation including the required, pattern, min, max, step, and maxlength attributes. For example, you use the required attribute to require a user to enter a value for an INPUT element. The following form demonstrates how you can make the firstName and lastName form fields required: <!DOCTYPE html> <html > <head> <title>Required Demo</title> </head> <body> <form> <label> First Name: <input required title="First Name is Required!" /> </label> <label> Last Name: <input required title="Last Name is Required!" /> </label> <button>Register</button> </form> </body> </html> If you attempt to submit this form without entering a value for firstName or lastName then you get the validation error message: Notice that the value of the title attribute is used to display the validation error message “First Name is Required!”. The title attribute does not work this way with the current version of Firefox. If you want to display a custom validation error message with Firefox then you need to include an x-moz-errormessage attribute like this: <input required title="First Name is Required!" x-moz-errormessage="First Name is Required!" /> The pattern attribute enables you to validate the value of an INPUT element against a regular expression. For example, the following form includes a social security number field which includes a pattern attribute: <!DOCTYPE html> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Pattern</title> </head> <body> <form> <label> Social Security Number: <input required pattern="^\d{3}-\d{2}-\d{4}$" title="###-##-####" /> </label> <button>Register</button> </form> </body> </html> The regular expression in the form above requires the social security number to match the pattern ###-##-####: Notice that the input field includes both a pattern and a required validation attribute. If you don’t enter a value then the regular expression is never triggered. You need to include the required attribute to force a user to enter a value and cause the value to be validated against the regular expression. Custom Validation You can take advantage of the HTML5 constraint validation API to perform custom validation. You can perform any custom validation that you need. The only requirement is that you write a JavaScript function. For example, when booking a hotel room, you might want to validate that the Arrival Date is in the future instead of the past: <!DOCTYPE html> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Constraint Validation API</title> </head> <body> <form> <label> Arrival Date: <input id="arrivalDate" type="date" required /> </label> <button>Submit Reservation</button> </form> <script type="text/javascript"> var arrivalDate = document.getElementById("arrivalDate"); arrivalDate.addEventListener("input", function() { var value = new Date(arrivalDate.value); if (value < new Date()) { arrivalDate.setCustomValidity("Arrival date must be after now!"); } else { arrivalDate.setCustomValidity(""); } }); </script> </body> </html> The form above contains an input field named arrivalDate. Entering a value into the arrivalDate field triggers the input event. The JavaScript code adds an event listener for the input event and checks whether the date entered is greater than the current date. If validation fails then the validation error message “Arrival date must be after now!” is assigned to the arrivalDate input field by calling the setCustomValidity() method of the validation constraint API. Otherwise, the validation error message is cleared by calling setCustomValidity() with an empty string. HTML5 Validation and Older Browsers But what about older browsers? For example, what about Apple Safari and versions of Microsoft Internet Explorer older than Internet Explorer 10? What the world really needs is a jQuery plugin which provides backwards compatibility for the HTML5 validation attributes. If a browser supports the HTML5 validation attributes then the plugin would do nothing. Otherwise, the plugin would add support for the attributes. Unfortunately, as far as I know, this plugin does not exist. I have not been able to find any plugin which supports both the required and pattern attributes for older browsers, but does not get in the way of these attributes in the case of newer browsers. There are several jQuery plugins which provide partial support for the HTML5 validation attributes including: · jQuery Validation — http://docs.jquery.com/Plugins/Validation · html5Form — http://www.matiasmancini.com.ar/jquery-plugin-ajax-form-validation-html5.html · h5Validate — http://ericleads.com/h5validate/ The jQuery Validation plugin – the most popular JavaScript validation library – supports the HTML5 required attribute, but it does not support the HTML5 pattern attribute. Likewise, the html5Form plugin does not support the pattern attribute. The h5Validate plugin provides the best support for the HTML5 validation attributes. The following page illustrates how this plugin supports both the required and pattern attributes: <!DOCTYPE html> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>h5Validate</title> <style type="text/css"> .validationError { border: solid 2px red; } .validationValid { border: solid 2px green; } </style> </head> <body> <form id="customerForm"> <label> First Name: <input id="firstName" required /> </label> <label> Social Security Number: <input id="ssn" required pattern="^\d{3}-\d{2}-\d{4}$" title="Expected pattern is ###-##-####" /> </label> <input type="submit" /> </form> <script type="text/javascript" src="Scripts/jquery-1.4.4.min.js"></script> <script type="text/javascript" src="Scripts/jquery.h5validate.js"></script> <script type="text/javascript"> // Enable h5Validate plugin $("#customerForm").h5Validate({ errorClass: "validationError", validClass: "validationValid" }); // Prevent form submission when errors $("#customerForm").submit(function (evt) { if ($("#customerForm").h5Validate("allValid") === false) { evt.preventDefault(); } }); </script> </body> </html> When an input field fails validation, the validationError CSS class is applied to the field and the field appears with a red border. When an input field passes validation, the validationValid CSS class is applied to the field and the field appears with a green border. From the perspective of HTML5 validation, the h5Validate plugin is the best of the plugins. It adds support for the required and pattern attributes to browsers which do not natively support these attributes such as IE9. However, this plugin does not include everything in my wish list for a perfect HTML5 validation plugin. Here’s my wish list for the perfect back compat HTML5 validation plugin: 1. The plugin would disable itself when used with a browser which natively supports HTML5 validation attributes. The plugin should not be too greedy – it should not handle validation when a browser could do the work itself. 2. The plugin should simulate the same user interface for displaying validation error messages as the user interface displayed by browsers which natively support HTML5 validation. Chrome, Firefox, and Internet Explorer all display validation errors in a popup. The perfect plugin would also display a popup. 3. Finally, the plugin would add support for the setCustomValidity() method and the other methods of the HTML5 validation constraint API. That way, you could implement custom validation in a standards compatible way and you would know that it worked across all browsers both old and new. Security It would be irresponsible of me to end this blog post without mentioning the issue of security. It is important to remember that any client-side validation — including HTML5 validation — can be bypassed. You should use client-side validation with the intention to create a better user experience. Client validation is great for providing a user with immediate feedback when the user is in the process of completing a form. However, client-side validation cannot prevent an evil hacker from submitting unexpected form data to your web server. You should always enforce your validation rules on the server. The only way to ensure that a required field has a value is to verify that the required field has a value on the server. The HTML5 required attribute does not guarantee anything. Summary The goal of this blog post was to describe the support for validation contained in the HTML5 standard. You learned how to use both the required and the pattern attributes in an HTML5 form. We also discussed how you can implement custom validation by taking advantage of the setCustomValidity() method. Finally, I discussed the available jQuery plugins for adding support for the HTM5 validation attributes to older browsers. Unfortunately, I am unaware of any jQuery plugin which provides a perfect solution to the problem of backwards compatibility.

  Read the article

• top tweets WebLogic Partner Community – September 2012

  - by JuergenKress

  Send your tweets @wlscommunity #WebLogicCommunity and follow us at http://twitter.com/wlscommunity Oracle Exalogic? VIDEO: Oracle Public Cloud Built on Exalogic!, http://www.youtube.com/watch?v=UGzjDloUw_s&feature=plcp … oracleopenworld #NetBeans Community Day at #JavaOne http://ow.ly/dunFL Oracle Cloud Zone Building an enterprise Cloud? Have Oracle show you the RIGHT way to plan, deploy and monitor enterprise clouds.... http://fb.me/286978S4S OTNArchBeat? Oracle Exalogic X2-2 walk-through with Brad Cameron | @jvzoggel http://pub.vitrue.com/yE7d Oracle Technet? Stash your cash. September OTN Member Offers - discounts on books, more | OTN Blog http://pub.vitrue.com/yTr9 C2B2 Consulting? C2B2 is Speaking at @UKOUG App Server Middleware SIG Meeting 'Real Life #WebLogic Performance Tuning' http://www.c2b2.co.uk/ukoug_application_server_middleware_sig_meeting … @wlscommunity JAXenter.com? From yesterday, @smeyen offers his views on the next generation #Java - do you agree? http://jaxenter.com/next-gen-java-we-don-t-need-another-revolutionary-44334.html … Markus Eisele? Awesome: professor from ITU uploads her programming lectures to #YouTube. Programming classes without having to pay! http://bit.ly/UtkJIW Adam Bien? Real World Java EE 6 Patterns--Rethinking Best Practices Reloaded: A completely rewritten, second, iteration of ... http://bit.ly/Qc3xTH Markus Eisele [blog] #PrimeFaces Push with #Atmosphere on #GlassFish 3.1.2.2 http://goo.gl/fb/jPDzA Lucas Jellema? Forms community event at Oracle Open World - Tuesday, 2nd Oct with the BIG names in Forms - see: http://oracleformsinfo.wordpress.com/2012/08/28/ask-the-product-manager-join-us-at-the-oracle-forms-community-event-at-openworld-2012/ … WebLogic Community WebLogic & Coherence & Cloud presentations for customer meetings http://wp.me/p1LMIb-kw Adam Bien? New Book: Rethinking Best Practices with Java EE 6 is out: http://realworldpatterns.com (fully rewritten, re-edited and reformatted) WebLogic Community? Want to become and WebLogic 12c expert? free WebLogic 12c partner bootcamps &ndash;new locations: Madrid Spain http://wp.me/p1LMIb-kK WebLogic Community? Promote Your WebLogic events at http://oracle.com http://wp.me/p1LMIb-ku OracleBlogs Gartner review Oracle ADF http://ow.ly/1mgkCV Simon Haslam Next #ukoug App Server & MW SIG on 10 Oct: http://www.ukoug.org/events/ukoug-application-server-and-middleware-sig-meeting8/ … Hopefully plenty of good admin stuff! Michel Schildmeijer My book "WebLogic 12c; First look" has been reviewed again..see http://www.amazon.com/review/R28L6E3CC9RPMK/ref=cm_cr_pr_perm?ie=UTF8&ASIN=1849687188&linkCode=&nodeID=&tag= … … Markus Eisele? #Weblogic 11g Interactive Quick Reference Map: http://bit.ly/Ugsq52 #wls #oracle #reference /via @TonyvanEsch Marc? Playing with #syslog server and #weblogic. Is there a simple how-to to configure all the logging from #WLS to #syslog-ng WebLogic Community Java update http://wp.me/p1LMIb-kI WebLogic Community top tweets WebLogic Partner Community &ndash; August 2012 http://wp.me/p1LMIb-kA Andrejus Baranovskis? Oracle University Training: ADF/WebCenter 11g Development in Depth | Andrejus Baranovskis http://fb.me/253ZTS2zp OracleSupport_WLS? How neat is a free tool that allows you to inspect and debug traffic from virtually any application? http://pub.vitrue.com/vXdP WebLogic Community WebLogic Partner Community Newsletter August 2012 http://wp.me/p1LMIb-kn OTNArchBeat Integrating Coherence & Java EE 6 Applications using ActiveCache | Ricardo Ferreira http://pub.vitrue.com/rwGg Adam Bien? Thanks for attending the #javaee #techtalk "Enterprise Java 2.0" I pushed the project and slides to: http://kenai.com/projects/javaee-patterns/sources/hg/show/hacks/techtalk2012?rev=429 … JDeveloper & ADF? How to service-enable Oracle ADF Business Components http://ht.ly/1mcfsZ OracleSupport_WLS? Do you know that #WebLogic 12.1.1.0 is certified for production with JDK 7? @ http://pub.vitrue.com/35Kn Andreas Koop? My latest upload : WebLogic Administration und Deployment mit WLST on @slideshare http://www.slideshare.net/multikoop/weblogic-administration-und-deployment-mit-wlst … OTNArchBeat? Demo for OPN: Oracle Coherence Management with EM Cloud Control 12c http://pub.vitrue.com/reoo Markus Eisele? [blog] Java Champions at #JavaOne 2012 http://goo.gl/fb/Ibb6N #javachampion OracleBlogs Buy This Book!: Oracle Exalogic Elastic Cloud Handbook http://ow.ly/1malM1 WebLogic Community? Coherence Management with EM Cloud Control 12c &ndash;demo for partners http://wp.me/p1LMIb-iE Arun Gupta? Learn how Java can help Internet of Things at Java Embedded at JavaOne: http://bit.ly/POBizh WebLogic Community? Follow WebLogicCommunity on facebook http://www.facebook.com/WebLogicCommunity … #WebLogicCommunity WebLogic Community? Building Java EE in the Cloud–Webcast August 30th 2012 https://weblogiccommunity.wordpress.com/2012/08/27/building-java-ee-in-the-cloudwebcast-august-30th-2012/ … #WebLogicCommunity #Java #oracle #opn WebLogic Community? Call for WebLogic Community newsletter content. Please send @wlscommunity #WebLogicCommunity OracleSupport_WLS? The #weblogic wasp: lots of tips, Q&A and examples http://pub.vitrue.com/v0bw Frank Nimphius? Free ADF Best Practices Webinar by Andrejus Baranovskis for ODTUG (18, 2012 12:00 PM - 1:00 PM EDT) http://bit.ly/OiSWbi ADF Code Corner Webcast- Friday September 14, 8:30 AM - 9.00 AM (CET) - ADF as a basis of Fusion Apps (in English) - with Chris Muir: http://bit.ly/OiQVMb Oracle WebLogic? New blog post: Developing Custom User Principal Object http://pub.vitrue.com/ltam JAX London? Just 4days left to get in on the early bird special, don't miss out!! http://jaxlondon.com/ #JAXLondon #Java WebLogic Community Building Java EE in the Cloud&ndash;Webcast August 30th 2012 http://wp.me/p1LMIb-kE Andrejus Baranovskis? New Record Master-Detail Validation and ADF BC Groovy Use Case http://fb.me/1D2NEIl8g JAX London? Don't miss out!!! Only 6 days left to make use of our early bird offer #JAXLondon #JAVA http://jaxlondon.com/ Michel Schildmeijer Qualogy launches Proof of Concept Center for Oracle Fusion Applications http://www.qualogy.com/qualogy-launches-proof-of-concept-center-for-oracle-fusion-applications/ … via @Qualogy_news OracleSupport_WLS ?Need to troubleshoot redeployment failure in #Weblogic? Check this http://pub.vitrue.com/auhz OracleEnterpriseMgr? Blog : Managing Oracle #Exalogic Elastic #Cloud with Oracle Enterprise Manager Ops Center http://ow.ly/dd40e #em12c ODTUG? Want free advanced technical ADF training?Join @andrejusb for an @odtug webinar! check out his blog for more info http://bit.ly/SvKJDq chriscmuir Oracle Open World 2012 and ADF EMG http://zite.to/QyusZE OTNArchBeat? Boost your infrastructure with Coherence into the Cloud | Nino Guarnacci http://pub.vitrue.com/v3aJ WebLogic Community? Presentations & Training material OFM Summer Camps & Impressions & Feedback http://wp.me/p1LMIb-ks Arun Gupta? Java EE 6 pocket guide by O'Reilly available for pre-order from Amazon: http://amzn.to/O6YyoP and B&N: http://bit.ly/NjWLk1 OTNArchBeat Joining the Existing Cluster in Coherence | A. Fuat Sungur http://pub.vitrue.com/6uLh Andrejus Baranovskis Sample Application for Switching Application Module Data Sources http://fb.me/1PSURUzch OTNArchBeat Oracle WebLogic DevCast: Building Java EE in the Cloud - August 30 - 10am PT/ 1pm ET http://pub.vitrue.com/xXg0 OTNArchBeat? GlassFish Community Event at #javaone - Sept 30 -11am – 1pm -Moscone South. Register Now! http://pub.vitrue.com/p2f5 OracleSupport_WLS? Connecting To HTTPS Site Using Simple Java Program When Using Proxy http://pub.vitrue.com/stVv Michel Schildmeijer? Before you go to #OOW take the sneak preview of WebLogic 12c with you: http://www.qualogy.com/ga-nog-niet-naar-oow-en-neem-mee-weblogic-12c/ … via @Qualogy_news Simon Haslam? Even more great ADF content at #oow2012 this year including a packed ADF EMG day on Sunday: https://blogs.oracle.com/onesizedoesntfitall/entry/the_year_after_the_year … OracleBlogs ExaLogic trainings for partners http://ow.ly/1m6a5D Robin? First presentation on DOAG conference (thanks to @Steffen2042) "Weblogic Server for Dummies". Now I´m pretty excited :) http://www.doag.org/de/events/konferenzen/doag-2012.html … Markus Eisele There is a #facebook page for the upcoming #Java Mission Control (JRockit Mission Control for #Hotspot)! ttp://on.fb.me/Q31oyA Adam Bien? The almost free #javaee workshop in Rapperswil has only 60 registrations so far: http://www.adam-bien.com/roller/abien/entry/enterprise_java_2_0_swiss … What's the problem? :-) WebLogic Community ExaLogic trainings for partners http://wp.me/p1LMIb-iC OracleBlogs How to install Oracle Weblogic Server using Generic Package installer? http://ow.ly/1m5ms7 OracleSupport_WLS #Weblogic Server new blog post - Developing Custom User Principal Object http://pub.vitrue.com/ltam OracleBlogs? Architects and Architecture at JavaOne 2012 http://ow.ly/1m4oS5 WebLogic Community Are you WebLogic or Application Grid Specialized? Do you get Recognized? Get your plaque https://weblogiccommunity.wordpress.com/2012/08/21/plaques-weblogic-application-grid-specialization/ … #WebLogicCommunity #opn WebLogic Community? Plaques WebLogic & Application Grid Specialization http://wp.me/p1LMIb-iA JDeveloper & ADF? First Steps With Oracle Application Testing Suite: Recording a Test With OpenScript http://dlvr.it/222npy WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: twitter,WebLogic,WebLogic Community,Oracle,OPN,Jürgen Kress

  Read the article

• CodePlex Daily Summary for Saturday, November 27, 2010

  CodePlex Daily Summary for Saturday, November 27, 2010Popular ReleasesMahTweets for Windows Phone: Nightly 69: Latest nightly for build 69XamlQuery/WPF - The Write Less, Do More, WPF Library: XamlQuery-WPF v1.2 (Runtime, Source): This is the first release of popular XamlQuery library for WPF. XamlQuery has already gained recognition among Silverlight developers.Math.NET Numerics: Beta 1: First beta of Math.NET Numerics. Only contains the managed linear algebra provider. Beta 2 will include the native linear algebra providers along with better documentation and examples.WatchersNET.SiteMap: WatchersNET.SiteMap 01.03.02: Whats NewNew Tax Filter, You can now select which Terms you want to Use.Minecraft GPS: Minecraft GPS 1.1: 1.1 Release New Features Compass! New style. Set opacity on main window to allow overlay of Minecraft.Microsoft All-In-One Code Framework: Visual Studio 2010 Code Samples 2010-11-25: Code samples for Visual Studio 2010Typps (formerly jiffycms) wysiwyg rich text HTML editor for ASP.NET AJAX: Typps 2.9: -When uploading files (not images), through the file uploader and the multi-file uploader, FileUploaded and MultiFileUploaded event handlers were reporting an empty event argument, this is fixed now. -Fixed also url field not updating when uploading a file ( not image)Wii Backup Fusion: Wii Backup Fusion 0.8.5 Beta: - WBFS repair (default) options fixed - Transfer to image fixed - Settings ui widget names fixed - Some little bug fixes You need to reset the settings! Delete WiiBaFu's config file or registry entries on windows: Linux: ~/.config/WiiBaFu/wiibafu.conf Windows: HKEY_CURRENT_USER\Software\WiiBaFu\wiibafu Mac OS X: ~/Library/Preferences/com.wiibafu.wiibafu.plist Caution: This is a BETA version! Errors, crashes and data loss not impossible! Use in test environments only, not on productive syste...Minemapper: Minemapper v0.1.3: Added process count and world size calculation progress to the status bar. Added View->'Status Bar' menu item to show/hide the status bar. Status bar is automatically shown when loading a world. Added a prompt, when loading a world, to use or clear cached images.SQL Monitor: SQL Monitor 1.4: 1.added automatically load sql server instances 2.added friendly wait cursor 3.fixed problem with 4.0 fx 4.added exception handlingSexy Select: sexy select v0.4: Changes in v0.4 Added method : elements. This returns all the option elements that are currently added to the select list Added method : selectOption. This method accepts two values, the element to be modified and the selected state. (true/false)Deep Zoom for WPF: First Release: This first release of the Deep Zoom control has the same source code, binaries and demos as the CodeProject article (http://www.codeproject.com/KB/WPF/DeepZoom.aspx).Simple Service Locator: Simple Service Locator v0.12: The Simple Service Locator is an easy-to-use Inversion of Control library that is a complete implementation of the Common Service Locator interface. It solely supports code-based configuration and is an ideal starting point for developers unfamiliar with larger IoC / DI libraries New features in this release Collections that are registered using RegisterAll<T> can now be injected using automatic constructor injection. A new RegisterAll<T>(params T[]) method overload is added that allows ea...BlogEngine.NET: BlogEngine.NET 2.0 RC: This is a Release Candidate version for BlogEngine.NET 2.0. The most current, stable version of BlogEngine.NET is version 1.6. Find out more about the BlogEngine.NET 2.0 RC here. If you want to extend or modify BlogEngine.NET, you should download the source code. To get started, be sure to check out our installation documentation and the installation screencast. If you are upgrading from a previous version, please take a look at the Upgrading to BlogEngine.NET 2.0 instructions. As this ...NodeXL: Network Overview, Discovery and Exploration for Excel: NodeXL Excel Template, version 1.0.1.156: The NodeXL Excel template displays a network graph using edge and vertex lists stored in an Excel 2007 or Excel 2010 workbook. What's NewThis release adds a feature for aggregating the overall metrics in a folder full of NodeXL workbooks, adds geographical coordinates to the Twitter import features, and fixes a memory-related bug. See the Complete NodeXL Release History for details. Please Note: There is a new option in the setup program to install for "Just Me" or "Everyone." Most people...VFPX: FoxBarcode v.0.11: FoxBarcode v.0.11 - Released 2010.11.22 FoxBarcode is a 100% Visual FoxPro class that provides a tool for generating images with different bar code symbologies to be used in VFP forms and reports, or exported to other applications. Its use and distribution is free for all Visual FoxPro Community. Whats is new? Added a third parameter to the BarcodeImage() method Fixed some minor bugs History FoxBarcode v.0.10 - Released 2010.11.19 - 85 Downloads Project page: FoxBarcodeDotNetAge -a lightweight Mvc jQuery CMS: DotNetAge 1.1.0.5: What is new in DotNetAge 1.1.0.5 ?Document Library features and template added. Resolve issues of templates Improving publishing service performance Opml support added. What is new in DotNetAge 1.1 ? D.N.A Core updatesImprove runtime performance , more stabilize. The DNA core objects model added. Personalization features added that allows users create the personal website, manage their resources, store personal data DynamicUIFixed the PageManager could not move page node bug. ...ASP.NET MVC Project Awesome (jQuery Ajax helpers): 1.3.1 and demos: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form and Pager tested on mozilla, safari, chrome, opera, ie 9b/8/7/6MDownloader: MDownloader-0.15.24.6966: Fixed Updater; Fixed minor bugs;WPF Application Framework (WAF): WPF Application Framework (WAF) 2.0.0.1: Version: 2.0.0.1 (Milestone 1): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Remark The sample applications are using Microsoft’s IoC container MEF. However, the WPF Application Framework (WAF) doesn’t force you to use the same IoC container in your application. You can use ...New ProjectsCommunity Megaphone for Windows Phone: The Official CommunityMegaphone application for Windows Phone. Releases are in XAP format, allowing you to upload the compiled application into a device using the Windows Phone Application Deployment tool. Download the source code to learn how to build Windows Phone applications.Group positioning GPS: this is a project for a subject in the university geographic information systems, its about a group of gadjets that can know the position of the other devices in the same group.IIS HTTPS Binder: On IIS 7 that you can not create more than one HTTPS binding, even though you have more then one SSL certificate and you need HTTPS binding on different hosted websites. If you have one IP address you can bind only one SSL to chosen website. This small application can fix this.Inspired Faith Now Playing: A ClickOnce-deployed desktop application that sits in your application tray and notifies you when any of your favorite Messianic Jewish and Christian artists or songs play on the Inspired Faith online radio station (http://inspiredfaith.org)MA Manager: The goal of this software is to help manage a martial arts school through multiple clients and platforms. This allows instructors to easily track students progress overtime.MathModels: This project contains commonly used algorithm implementations in C# .netMyFlickr API: MyFlickr API is a library for developers allows them to call Flickr API from any .Net Application.NerdOnRails.DynamicProxy: a small dynamic-proxy implementation using the new dynamic object that was introduced with .Net 4.NerdOnRails.Injector: a small dependency injection framework for .netNHyperV: NHyperV is a C# Hyper-V programming model.Power Scheme Switcher: This is a very simple utility that exposes an icon in the system tray and allows you to quickly change the Power Plan Scheme from there. It is developed in c# with Vs 2010(WinForm)rcforms: Custom sharepoint forms exampleRobo Commander: This is a Lego NXT commander developed under Visual Studio. This console will have basic commands and uses the NXT++ libraries. Shared Genomics Project - Workbench Codebase: The Shared Genomics workbench enables a diverse user group of researchers to explore the associations between genetic and other factors in their datasets. It provides a graphical user interface to the analysis functions published in a sister Codeplex project i.e. MPI Codebase.SharePoint 2010 PowerShell v2 reference: This project hosts a complete PowerShell v2 reference for SharePoint 2010.Social PowerFlow: Experiments with PowerWF and the social network - integrating Windows Powershell and Windows Workflow Foundation with Facebook and TwitterTweetSayings: Twitter SayingsXamlQuery/WPF - The Write Less, Do More, WPF Library: XamlQuery/WPF is a lightweight yet powerful library that enables rapid development in WPF. It simplifies several tasks like page/window traversing; finding controls by name, type, style, property value or position in control tree; event handling; animating and much more.XmlDSigEx XML Digital Signature Library: The XmlDSigEx library is an alternative to using the SignedXml classes in the .Net Framework. It addresses some of the shortcomings of the standard types particularly in regards to canonicalisation and the enveloped transform. It is currently under development.Yoi's Online Project: This is online storage for Yovi's project?????? ???? ???: ?????? ???? ?? ????? ??? ?????? ? ??????? ?? ???? ??? ????

  Read the article

• jQuery CSS Property Monitoring Plug-in updated

  - by Rick Strahl

  A few weeks back I had talked about the need to watch properties of an object and be able to take action when certain values changed. The need for this arose out of wanting to build generic components that could 'attach' themselves to other objects. One example is a drop shadow - if I add a shadow behavior to an object I want the shadow to be pinned to that object so when that object moves I also want the shadow to move with it, or when the panel is hidden the shadow should hide with it - automatically without having to explicitly hook up monitoring code to the panel. For example, in my shadow plug-in I can now do something like this (where el is the element that has the shadow attached and sh is the shadow): if (!exists) // if shadow was created el.watch("left,top,width,height,display", function() { if (el.is(":visible")) $(this).shadow(opt); // redraw else sh.hide(); }, 100, "_shadowMove"); The code now monitors several properties and if any of them change the provided function is called. So when the target object is moved or hidden or resized the watcher function is called and the shadow can be redrawn or hidden in the case of visibility going away. So if you run any of the following code: $("#box") .shadow() .draggable({ handle: ".blockheader" }); // drag around the box - shadow should follow // hide the box - shadow should disappear with box setTimeout(function() { $("#box").hide(); }, 4000); // show the box - shadow should come back too setTimeout(function() { $("#box").show(); }, 8000); This can be very handy functionality when you're dealing with objects or operations that you need to track generically and there are no native events for them. For example, with a generic shadow object that attaches itself to any another element there's no way that I know of to track whether the object has been moved or hidden either via some UI operation (like dragging) or via code. While some UI operations like jQuery.ui.draggable would allow events to fire when the mouse is moved nothing of the sort exists if you modify locations in code. Even tracking the object in drag mode this is hardly generic behavior - a generic shadow implementation can't know when dragging is hooked up. So the watcher provides an alternative that basically gives an Observer like pattern that notifies you when something you're interested in changes. In the watcher hookup code (in the shadow() plugin) above  a check is made if the object is visible and if it is the shadow is redrawn. Otherwise the shadow is hidden. The first parameter is a list of CSS properties to be monitored followed by the function that is called. The function called receives this as the element that's been changed and receives two parameters: The array of watched objects with their current values, plus an index to the object that caused the change function to fire. How does it work When I wrote it about this last time I started out with a simple timer that would poll for changes at a fixed interval with setInterval(). A few folks commented that there are is a DOM API - DOMAttrmodified in Mozilla and propertychange in IE that allow notification whenever any property changes which is much more efficient and smooth than the setInterval approach I used previously. On browser that support these events (FireFox and IE basically - WebKit has the DOMAttrModified event but it doesn't appear to work) the shadow effect is instant - no 'drag behind' of the shadow. Running on a browser that doesn't support still uses setInterval() and the shadow movement is slightly delayed which looks sloppy. There are a few additional changes to this code - it also supports monitoring multiple CSS properties now so a single object can monitor a host of CSS properties rather than one object per property which is easier to work with. For display purposes position, bounds and visibility will be common properties that are to be watched. Here's what the new version looks like: $.fn.watch = function (props, func, interval, id) { /// <summary> /// Allows you to monitor changes in a specific /// CSS property of an element by polling the value. /// when the value changes a function is called. /// The function called is called in the context /// of the selected element (ie. this) /// </summary> /// <param name="prop" type="String">CSS Properties to watch sep. by commas</param> /// <param name="func" type="Function"> /// Function called when the value has changed. /// </param> /// <param name="interval" type="Number"> /// Optional interval for browsers that don't support DOMAttrModified or propertychange events. /// Determines the interval used for setInterval calls. /// </param> /// <param name="id" type="String">A unique ID that identifies this watch instance on this element</param> /// <returns type="jQuery" /> if (!interval) interval = 200; if (!id) id = "_watcher"; return this.each(function () { var _t = this; var el$ = $(this); var fnc = function () { __watcher.call(_t, id) }; var itId = null; var data = { id: id, props: props.split(","), func: func, vals: [props.split(",").length], fnc: fnc, origProps: props, interval: interval }; $.each(data.props, function (i) { data.vals[i] = el$.css(data.props[i]); }); el$.data(id, data); hookChange(el$, id, data.fnc); }); function hookChange(el$, id, fnc) { el$.each(function () { var el = $(this); if (typeof (el.get(0).onpropertychange) == "object") el.bind("propertychange." + id, fnc); else if ($.browser.mozilla) el.bind("DOMAttrModified." + id, fnc); else itId = setInterval(fnc, interval); }); } function __watcher(id) { var el$ = $(this); var w = el$.data(id); if (!w) return; var _t = this; if (!w.func) return; // must unbind or else unwanted recursion may occur el$.unwatch(id); var changed = false; var i = 0; for (i; i < w.props.length; i++) { var newVal = el$.css(w.props[i]); if (w.vals[i] != newVal) { w.vals[i] = newVal; changed = true; break; } } if (changed) w.func.call(_t, w, i); // rebind event hookChange(el$, id, w.fnc); } } $.fn.unwatch = function (id) { this.each(function () { var el = $(this); var fnc = el.data(id).fnc; try { if (typeof (this.onpropertychange) == "object") el.unbind("propertychange." + id, fnc); else if ($.browser.mozilla) el.unbind("DOMAttrModified." + id, fnc); else clearInterval(id); } // ignore if element was already unbound catch (e) { } }); return this; } There are basically two jQuery functions - watch and unwatch. jQuery.fn.watch(props,func,interval,id) Starts watching an element for changes in the properties specified. props The CSS properties that are to be watched for changes. If any of the specified properties changes the function specified in the second parameter is fired. func (watchData,index) The function fired in response to a changed property. Receives this as the element changed and object that represents the watched properties and their respective values. The first parameter is passed in this structure:    { id: itId, props: [], func: func, vals: [] }; A second parameter is the index of the changed property so data.props[i] or data.vals[i] gets the property value that has changed. interval The interval for setInterval() for those browsers that don't support property watching in the DOM. In milliseconds. id An optional id that identifies this watcher. Required only if multiple watchers might be hooked up to the same element. The default is _watcher if not specified. jQuery.fn.unwatch(id) Unhooks watching of the element by disconnecting the event handlers. id Optional watcher id that was specified in the call to watch. This value can be omitted to use the default value of _watcher. You can also grab the latest version of the  code for this plug-in as well as the shadow in the full library at: http://www.west-wind.com:8080/svn/jquery/trunk/jQueryControls/Resources/ww.jquery.js watcher has no other dependencies although it lives in this larger library. The shadow plug-in depends on watcher.© Rick Strahl, West Wind Technologies, 2005-2011

  Read the article

• CodePlex Daily Summary for Friday, November 09, 2012

  CodePlex Daily Summary for Friday, November 09, 2012Popular ReleasesPlayer Framework by Microsoft: Player Framework for Windows 8 (v1.0): IMPORTANT: List of breaking changes from preview 7 Ability to move control panel or individual elements outside media player. more info... New Entertainment app theme for out of the box support for Windows 8 Entertainment app guidelines. more info... VSIX reference names shortened. Allows seeing plugin name from "Add Reference" dialog without resizing. FreeWheel SmartXML now supports new "Standard" event callback type. Other minor misc fixes and improvements ADDITIONAL DOWNLOADSSmo...WebSearch.Net: WebSearch.Net 3.1: WebSearch.Net is an open-source research platform that provides uniform data source access, data modeling, feature calculation, data mining, etc. It facilitates the experiments of web search researchers due to its high flexibility and extensibility. The platform can be used or extended by any language compatible for .Net 2 framework, from C# (recommended), VB.Net to C++ and Java. Thanks to the large coverage of knowledge in web search research, it is necessary to model the techniques and main...Umbraco CMS: Umbraco 4.10.0: NugetNuGet BlogRead the release blog post for 4.10.0. Whats newMVC support New request pipeline Many, many bugfixes (see the issue tracker for a complete list) Read the documentation for the MVC bits. Breaking changesWe have done all we can not to break backwards compatibility, but we had to do some minor breaking changes: Removed graphicHeadlineFormat config setting from umbracoSettings.config (an old relic from the 3.x days) U4-690 DynamicNode ChildrenAsList was fixed, altering it'...MySQL Tuner for Windows: 0.3: Welcome to the third beta of MySQL Tuner for Windows! This release fixes bugs in the displaying of numbers, and a crash that occurred due to the program incorrectly closing and disposing of resources, Be warned that there will be bugs in this release, so please do not use on production or critical systems. Do post details of issues found to the issue tracker, and I will endeavour to fix them, when I can. I would love to have your feedback, and if possible your support! Requirements Microso...SharePoint Manager 2013: SharePoint Manager 2013 Release ver 1.0.12.1106: SharePoint Manager 2013 Release (ver: 1.0.12.1106) is now ready for SharePoint 2013. The new version has an expanded view of the SharePoint object model and has been tested on SharePoint 2013 RTM. As a bonus, the new version is also available for SharePoint 2010 as a separate download.GL2DX (OpenGL to DirectX Wrapper Library): GL2DX Release 1: The first release contains all source code for the GL2DX library and source code for the sample project demonstrating how to use the library for a Direct3D / XAML hybrid Windows 8 application.WCF y Net remoting en el famoso ejemplo HOLA MUNDO: Ejemplo: Versión liberadaD3D9Client: D3D9Client R7: New release for Orbiter 2010-P1 - Added horizon/sun angle for night-lights into the configuration file (default 10deg) - Some runway lights related bugs are fixed - Added more configuration options for runway lightsFiskalizacija za developere: FiskalizacijaDev 1.2: Verzija 1.2. je, prije svega, odgovor na novu verziju Tehnicke specifikacije (v1.1.) koja je objavljena prije nekoliko dana. Pored novosti vezanih uz (sitne) izmjene u spomenutoj novoj verziji Tehnicke dokumentacije, projekt smo prošili sa nekim dodatnim feature-ima od kojih je vecina proizašla iz vaših prijedloga - hvala :) Novosti u v1.2. su: - Neusuglašenost zahtjeva (http://fiskalizacija.codeplex.com/workitem/645) - Sample projekt - iznosi se množe sa 100 (http://fiskalizacija.codeplex.c...MFCMAPI: October 2012 Release: Build: 15.0.0.1036 Full release notes at SGriffin's blog. If you just want to run the MFCMAPI or MrMAPI, get the executables. If you want to debug them, get the symbol files and the source. The 64 bit builds will only work on a machine with Outlook 2010 64 bit installed. All other machines should use the 32 bit builds, regardless of the operating system. Facebook BadgeJayData - The cross-platform HTML5 data-management library for JavaScript: JayData 1.2.3: JayData is a unified data access library for JavaScript to CRUD + Query data from different sources like OData, MongoDB, WebSQL, SqLite, HTML5 localStorage, Facebook or YQL. The library can be integrated with Knockout.js or Sencha Touch 2 and can be used on Node.js as well. See it in action in this 6 minutes video Sencha Touch 2 example app using JayData: Netflix browser. What's new in JayData 1.2.3 For detailed release notes check the release notes. TypeScript supportWrite your code in a ...MCEBuddy 2.x: MCEBuddy 2.3.7: Changelog for 2.3.7 (32bit and 64bit) 1. Improved performance of MP4 Fast and M4V Fast Profiles (no deinterlacing, removed --decomb) 2. Improved priority handling 3. Added support for Pausing and Resume conversions 4. Added support for fallback to source directory if network destination directory is unavailable 5. MCEBuddy now installs ShowAnalyzer during installation 6. Added support for long description atom in iTunesFoxyXLS: FoxyXLS Releases: Source code and samplesHTML Renderer: HTML Renderer 1.0.0.0 (3): Major performance improvement (http://theartofdev.wordpress.com/2012/10/25/how-i-optimized-html-renderer-and-fell-in-love-with-vs-profiler/) Minor fixes raised in issue tracker and discussions.Window Manager: Window Manager 1.0: First releaseProDinner - ASP.NET MVC Sample (EF4.4, N-Tier, jQuery): 8: update to ASP.net MVC Awesome 3.0 udpate to EntityFramework 4.4 update to MVC 4 added dinners grid on homepageASP.net MVC Awesome - jQuery Ajax Helpers: 3.0: added Grid helper added XML Documentation added textbox helper added Client Side API for AjaxList removed .SearchButton from AjaxList AjaxForm and Confirm helpers have been merged into the Form helper optimized html output for AjaxDropdown, AjaxList, Autocomplete works on MVC 3 and 4BlogEngine.NET: BlogEngine.NET 2.7: Cheap ASP.NET Hosting - $4.95/Month - Click Here!! Click Here for More Info Cheap ASP.NET Hosting - $4.95/Month - Click Here! If you want to set up and start using BlogEngine.NET right away, you should download the Web project. If you want to extend or modify BlogEngine.NET, you should download the source code. If you are upgrading from a previous version of BlogEngine.NET, please take a look at the Upgrading to BlogEngine.NET 2.7 instructions. If you looking for Web Application Project, ...Launchbar: Launchbar 4.2.2.0: This release is the first step in cleaning up the code and using all the latest features of .NET 4.5 Changes 4.2.2 (2012-11-02) Improved handling of left clicks 4.1.0 (2012-10-17) Removed tray icon Assembly renamed and signed with strong name Note When you upgrade, Launchbar will start with the default settings. You can import your previous settings by following these steps: Run Launchbar and just save the settings without configuring anything Shutdown Launchbar Go to the folder %LOCA...CommonLibrary.NET: CommonLibrary.NET 0.9.8.8: Releases notes for FluentScript located at http://fluentscript.codeplex.com/wikipage?title=Release%20Notes&referringTitle=Documentation Fluentscript - 0.9.8.8 - Final ReleaseApplication: FluentScript Version: 0.9.8.8 Build: 0.9.8.8 Changeset: 77368 ( CommonLibrary.NET ) Release date: November 2nd, 2012 Binaries: CommonLibrary.dll Namespace: ComLib.Lang Project site: http://fluentscript.codeplex.com/ Download: http://commonlibrarynet.codeplex.com/releases/view/90426 Source code: http://common...New Projects.NET Data Export Examples: This project is created to export data in C#,VB.NET from database,listview,command to PDF, Word,Excel,RTF,Html,XML,Access,DBF,SQL Script,SYLK,DIF,CSV,Clipboardb9b18a35-a80a-440c-bb8c-195be0225cfa: b9b18a35-a80a-440c-bb8c-195be0225cfaBudget Monkey: Personal Budgeting and Expense Tracking Application - ASP.Net MVC 4 - LINQ - Sql Server ClassLibrary5: ?0?????ORM ??:http://www.cnblogs.com/wushilonng/archive/2011/11/21/2257657.html ??????????????.CodeTextBox: CodeTextBox is a Windows Forms control for colorizing code while you are typing in the text box.Content Management System: web projectCopperfield: Copperfield is an extensibility framework built around contextual awareness. It is intended to be used in combination with one's DI / IoC framework of choice.Cyfuscator: This project show how create your own obfuscator for application .net, as a protection source codeData Browser: The Data Browser is a Windows 8 application that provides a great way to navigate and explore data (ODATA, RDF, ATOM, RDFa) published on the web. DevTask: Dev Task With MVC 4 and EF5DVB Viewer EPG Update Script: DVB Viewer EPG Update ScriptFcompress: Fcompress est un programme de compression simple, rapide et efficace de texte (mots). Programme conçu pour Eurêmaths, groupe Europole.Fdecompress: Fdecompress sert à décomprimer tout mot ou texte comprimer avec Fcompress.Hiren's Boot CD Program Launcher (Unicode support): Hiren's Boot CD Program Launcher (Unicode support)Image Gallery for WPF: A simple image gallery controlIMDb API: C# Class for grabbing data from the IMDb website.License Migration Live@edu Exchange to Office 365 A2: Only a little help to change the licenses after migration from Live@edu to Office 365MvcMSFootballManager: ASP MVC3 self-trainingNage: .NET Agent-based evolution frameworkOE NIK szakirány féléves: Féléves feladat.Office365 Helper: Office365 Helper is a collection of classes and methods to assist in administering and developing solutions for SharePoint online.Powershell Depo: This a collection of Powershell scripts that are collected and modified from anywhere and everywhere. Feel free to download whatever you need.Proejct13251109: sssProject13271109: sdfgdRemotableViewModel: The RemotableViewModel (RVM) library allows sharing of ViewModels accross process boundaries following the Model-View-ViewModel (MVVM) pattern.ScriptEngine: ScriptEngine for C#, JavaScript, VB. The ScriptEngine enables perform script snippets/files. In addition, the scripts can be cached.Shibboleth IdP Loader for ADFS: A PowerShell script to load Shibboleth federation IdPs as ADFS trusted claims providerSparklings: Game in which you change sparklings abilities using spots of light to help them reach the exit.Stala - Auto-update essentials: C# library and examples for event driven auto-updates without predefined graphical components/windows. Works with MSI packages and installer over web/intranet.STeaL : stealed functionarities from STL: STeaL is a .NET class library implemented with C# and enables you to use STL functionarities. especially, various of IList<T> extensions included.TechQueue: A series of Projects and code which are described in the blog http://techqueue.wordpress.comtesttom11082012git03: fsatesttom11082012tfs02: dsToyunda Phone: A simple searchable list of the songs available at the Karaoke rooms in the Epitanime event ran by students at the school named Epita in Paris.WebSearch.Net: WebSearch.Net is an open-source research platform that provides uniform data source access, data modeling, feature calculation, data mining, etc. Win8Controls: This project contains XAML based calendar control for WinRT / Windows Store Style application.WindowsCommonStorage: windows common storage

  Read the article

• Problem displaying tiles using tiled map loader with SFML

  - by user1905192

  I've been searching fruitlessly for what I did wrong for the past couple of days and I was wondering if anyone here could help me. My program loads my tile map, but then crashes with an assertion error. The program breaks at this line: spacing = atoi(tilesetElement-Attribute("spacing")); Here's my main game.cpp file. #include "stdafx.h" #include "Game.h" #include "Ball.h" #include "level.h" using namespace std; Game::Game() { gameState=NotStarted; ball.setPosition(500,500); level.LoadFromFile("meow.tmx"); } void Game::Start() { if (gameState==NotStarted) { window.create(sf::VideoMode(1024,768,320),"game"); view.reset(sf::FloatRect(0,0,1000,1000));//ball drawn at 500,500 level.SetDrawingBounds(sf::FloatRect(view.getCenter().x-view.getSize().x/2,view.getCenter().y-view.getSize().y/2,view.getSize().x, view.getSize().y)); window.setView(view); gameState=Playing; } while(gameState!=Exiting) { GameLoop(); } window.close(); } void Game::GameLoop() { sf::Event CurrentEvent; window.pollEvent(CurrentEvent); switch(gameState) { case Playing: { window.clear(sf::Color::White); window.setView(view); if (CurrentEvent.type==sf::Event::Closed) { gameState=Exiting; } if ( !ball.IsFalling() &&!ball.IsJumping() &&sf::Keyboard::isKeyPressed(sf::Keyboard::Space)) { ball.setJState(); } ball.Update(view); level.Draw(window); ball.Draw(window); window.display(); break; } } } And here's the file where the error happens: /********************************************************************* Quinn Schwab 16/08/2010 SFML Tiled Map Loader The zlib license has been used to make this software fully compatible with SFML. See http://www.sfml-dev.org/license.php This software is provided 'as-is', without any express or implied warranty. In no event will the authors be held liable for any damages arising from the use of this software. Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the following restrictions: 1. The origin of this software must not be misrepresented; you must not claim that you wrote the original software. If you use this software in a product, an acknowledgment in the product documentation would be appreciated but is not required. 2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software. 3. This notice may not be removed or altered from any source distribution. *********************************************************************/ #include "level.h" #include <iostream> #include "tinyxml.h" #include <fstream> int Object::GetPropertyInt(std::string name) { int i; i = atoi(properties[name].c_str()); return i; } float Object::GetPropertyFloat(std::string name) { float f; f = strtod(properties[name].c_str(), NULL); return f; } std::string Object::GetPropertyString(std::string name) { return properties[name]; } Level::Level() { //ctor } Level::~Level() { //dtor } using namespace std; bool Level::LoadFromFile(std::string filename) { TiXmlDocument levelFile(filename.c_str()); if (!levelFile.LoadFile()) { std::cout << "Loading level \"" << filename << "\" failed." << std::endl; return false; } //Map element. This is the root element for the whole file. TiXmlElement *map; map = levelFile.FirstChildElement("map"); //Set up misc map properties. width = atoi(map->Attribute("width")); height = atoi(map->Attribute("height")); tileWidth = atoi(map->Attribute("tilewidth")); tileHeight = atoi(map->Attribute("tileheight")); //Tileset stuff TiXmlElement *tilesetElement; tilesetElement = map->FirstChildElement("tileset"); firstTileID = atoi(tilesetElement->Attribute("firstgid")); spacing = atoi(tilesetElement->Attribute("spacing")); margin = atoi(tilesetElement->Attribute("margin")); //Tileset image TiXmlElement *image; image = tilesetElement->FirstChildElement("image"); std::string imagepath = image->Attribute("source"); if (!tilesetImage.loadFromFile(imagepath))//Load the tileset image { std::cout << "Failed to load tile sheet." << std::endl; return false; } tilesetImage.createMaskFromColor(sf::Color(255, 0, 255)); tilesetTexture.loadFromImage(tilesetImage); tilesetTexture.setSmooth(false); //Columns and rows (of tileset image) int columns = tilesetTexture.getSize().x / tileWidth; int rows = tilesetTexture.getSize().y / tileHeight; std::vector <sf::Rect<int> > subRects;//container of subrects (to divide the tilesheet image up) //tiles/subrects are counted from 0, left to right, top to bottom for (int y = 0; y < rows; y++) { for (int x = 0; x < columns; x++) { sf::Rect <int> rect; rect.top = y * tileHeight; rect.height = y * tileHeight + tileHeight; rect.left = x * tileWidth; rect.width = x * tileWidth + tileWidth; subRects.push_back(rect); } } //Layers TiXmlElement *layerElement; layerElement = map->FirstChildElement("layer"); while (layerElement) { Layer layer; if (layerElement->Attribute("opacity") != NULL)//check if opacity attribute exists { float opacity = strtod(layerElement->Attribute("opacity"), NULL);//convert the (string) opacity element to float layer.opacity = 255 * opacity; } else { layer.opacity = 255;//if the attribute doesnt exist, default to full opacity } //Tiles TiXmlElement *layerDataElement; layerDataElement = layerElement->FirstChildElement("data"); if (layerDataElement == NULL) { std::cout << "Bad map. No layer information found." << std::endl; } TiXmlElement *tileElement; tileElement = layerDataElement->FirstChildElement("tile"); if (tileElement == NULL) { std::cout << "Bad map. No tile information found." << std::endl; return false; } int x = 0; int y = 0; while (tileElement) { int tileGID = atoi(tileElement->Attribute("gid")); int subRectToUse = tileGID - firstTileID;//Work out the subrect ID to 'chop up' the tilesheet image. if (subRectToUse >= 0)//we only need to (and only can) create a sprite/tile if there is one to display { sf::Sprite sprite;//sprite for the tile sprite.setTexture(tilesetTexture); sprite.setTextureRect(subRects[subRectToUse]); sprite.setPosition(x * tileWidth, y * tileHeight); sprite.setColor(sf::Color(255, 255, 255, layer.opacity));//Set opacity of the tile. //add tile to layer layer.tiles.push_back(sprite); } tileElement = tileElement->NextSiblingElement("tile"); //increment x, y x++; if (x >= width)//if x has "hit" the end (right) of the map, reset it to the start (left) { x = 0; y++; if (y >= height) { y = 0; } } } layers.push_back(layer); layerElement = layerElement->NextSiblingElement("layer"); } //Objects TiXmlElement *objectGroupElement; if (map->FirstChildElement("objectgroup") != NULL)//Check that there is atleast one object layer { objectGroupElement = map->FirstChildElement("objectgroup"); while (objectGroupElement)//loop through object layers { TiXmlElement *objectElement; objectElement = objectGroupElement->FirstChildElement("object"); while (objectElement)//loop through objects { std::string objectType; if (objectElement->Attribute("type") != NULL) { objectType = objectElement->Attribute("type"); } std::string objectName; if (objectElement->Attribute("name") != NULL) { objectName = objectElement->Attribute("name"); } int x = atoi(objectElement->Attribute("x")); int y = atoi(objectElement->Attribute("y")); int width = atoi(objectElement->Attribute("width")); int height = atoi(objectElement->Attribute("height")); Object object; object.name = objectName; object.type = objectType; sf::Rect <int> objectRect; objectRect.top = y; objectRect.left = x; objectRect.height = y + height; objectRect.width = x + width; if (objectType == "solid") { solidObjects.push_back(objectRect); } object.rect = objectRect; TiXmlElement *properties; properties = objectElement->FirstChildElement("properties"); if (properties != NULL) { TiXmlElement *prop; prop = properties->FirstChildElement("property"); if (prop != NULL) { while(prop) { std::string propertyName = prop->Attribute("name"); std::string propertyValue = prop->Attribute("value"); object.properties[propertyName] = propertyValue; prop = prop->NextSiblingElement("property"); } } } objects.push_back(object); objectElement = objectElement->NextSiblingElement("object"); } objectGroupElement = objectGroupElement->NextSiblingElement("objectgroup"); } } else { std::cout << "No object layers found..." << std::endl; } return true; } Object Level::GetObject(std::string name) { for (int i = 0; i < objects.size(); i++) { if (objects[i].name == name) { return objects[i]; } } } void Level::SetDrawingBounds(sf::Rect<float> bounds) { drawingBounds = bounds; cout<<tileHeight; //Adjust the rect so that tiles are drawn just off screen, so you don't see them disappearing. drawingBounds.top -= tileHeight; drawingBounds.left -= tileWidth; drawingBounds.width += tileWidth; drawingBounds.height += tileHeight; } void Level::Draw(sf::RenderWindow &window) { for (int layer = 0; layer < layers.size(); layer++) { for (int tile = 0; tile < layers[layer].tiles.size(); tile++) { if (drawingBounds.contains(layers[layer].tiles[tile].getPosition().x, layers[layer].tiles[tile].getPosition().y)) { window.draw(layers[layer].tiles[tile]); } } } } I really hope that one of you can help me and I'm sorry if I've made any formatting issues. Thanks!

  Read the article

• Remote Desktop Services Gateway Issue

  - by AVandelay05

  Alright fellow techies here's the rundown. I have installed Server 2008 r2 Remote Dekstop Services on a VM in my network. I installed the following RD role services: RD Session Host, Licensing, Connection Broker, Gateway, Web Access. When I set things up originally, the gateway server and RDWeb worked as it should locally. After getting things running locally (remoteserver.domainname.local) I wanted to test things externally. From the outside, I couldn't get things running (meaning I could connect to rdweb access externally, but when I tried to run an app I would get the message "can't connect/find computer"). Here's my setup for external access The VM has every RD Services role services installed on it, meaning it acts as gateway, rd web access, session host, licensing, the whole bit. I made a self-signed certificate on the gateway server (gateway.domainname.net is the cert name). Internally, I have a secondary forward-lookup zone called domainname.net with an A record gateway pointing to the local IP of the gateway server. On our public DNS (domainname.net) I have an A record gateway. This is to access the RDWeb externally. In IIS I have the following authentication settings RDWeb: All disabled except for anonymous authentication Rpc: All disabled except for basic and windows RpcWithCert: All disbled except for windows authentication I have the necessary web access config in our sonicwall tz210 (https and rdp, external ip pointing to local ip of rds server) RAP and CAP have the correct user and computer groups, authentication, and allowed devices After all of this, here's what happens accessing externally. I can login correctly to RDWeb Access (I've tried a bogus login, I can't login to it so that's working properly). I see the Apps for use. I click on an app, click connect, the credential window opens, I put in the correct user creds, it tries to connect to the gateway server, but then the cred window comes back in view. I tried to reach a limit of failed logins, but never reached one, haha. So from the same external client machine I try to connect to the gateway through a Remote Desktop connection. I put in the correct gateway settings in the RD window, try to connect and get the same results as I did in RDWeb access. I checked the event logs on the RD Services machine and saw the following event IDs around the time I tried to login externally: ID 6037 with the message "The program svchost.exe, with the assigned process ID 2168, could not authenticate locally by using the target name host/gateway.domainname.net. The target name used is not valid. A target name should refer to one of the local computer names, for example, the DNS host name. Try a different target name." ID 10 RADWebAccess "RD Web Access was unable to access gateway.domainname.net, which is the server that is specified as running the RemoteApp and Desktop Connection Management service. Ensure that the computer account of the RD Web Access server is a member of the TS Web Access Computers security group on gateway.domainname.net" ID 4625 "An account failed to log on. Subject: Security ID: NULL SID Account Name: - Account Domain: - Logon ID: 0x0 Logon Type: 3 Account For Which Logon Failed: Security ID: NULL SID Account Name: Administrator Account Domain: gateway.domainname.net Failure Information: Failure Reason: Unknown user name or bad password. Status: 0xc000006d Sub Status: 0xc000006a Process Information: Caller Process ID: 0x0 Caller Process Name: - Network Information: Workstation Name: USER-LAPTOP Source Network Address: External IP Source Port: 63125 Detailed Authentication Information: Logon Process: NtLmSsp Authentication Package: NTLM Transited Services: - Package Name (NTLM only): - Key Length: 0 This event is generated when a logon request fails. It is generated on the computer where access was attempted. The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe. The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network). The Process Information fields indicate which account and process on the system requested the logon. The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases. The authentication information fields provide detailed information about this specific logon request. - Transited services indicate which intermediate services have participated in this logon request. - Package name indicates which sub-protocol was used among the NTLM protocols." I don't think the VM has a null SID. The SID of the VM and it's physical host have different SIDS. I can access the blank page for rpc externally using the external gateway name. It seems like authentication is a problem. Also, is it a problem that the external name of the gateway server doesn't match the local name? The external name (which the cert is based on) is gateway.domainname.net and the internal name is remoteserver.domainname.local. That's the only thing I can think of that would be the problem, but the external name has to be different from the local right? Internally, I ping gateway.domainname.net and it gives me the correct local IP of the server. Now, there isn't an actual computer name in AD, but I don't know how I would achieve that? I hope I've been clear....any help would be appreciated. I think I'm close to achieving this. :)

  Read the article

• CodePlex Daily Summary for Sunday, December 02, 2012

  CodePlex Daily Summary for Sunday, December 02, 2012Popular ReleasesD3 Loot Tracker: 1.5.6: Updated to work with D3 version 1.0.6.13300DirectQ: DirectQ II 2012-11-29: A (slightly) modernized port of Quake II to D3D9. You need SM3 or better hardware to run this - if you don't have it, then don't even bother. It should work on Windows Vista, 7 or 8; it may also work on XP but I haven't tested. Known bugs include: Some mods may not work. This is unfortunately due to the nature of Quake II's game DLLs; sometimes a recompile of the game DLL is all that's needed. In any event, ensure that the game DLL is compatible with the last release of Quake II first (...Magelia WebStore Open-source Ecommerce software: Magelia WebStore 2.2: new UI for the Administration console Bugs fixes and improvement version 2.2.215.3JayData - The cross-platform HTML5 data-management library for JavaScript: JayData 1.2.5: What's new in JayData 1.2.5For detailed release notes check the release notes. Handlebars template engine supportImplement data manager applications with JayData using Handlebars.js for templating. Include JayDataModules/handlebars.js and begin typing the mustaches :) Blogpost: Handlebars templates in JayData Handlebars helpers and model driven commanding in JayData Easy JayStorm cloud data managementManage cloud data using the same syntax and data management concept just like any other data ...nopCommerce. Open source shopping cart (ASP.NET MVC): nopcommerce 2.70: Highlight features & improvements: • Performance optimization. • Search engine optimization. ID-less URLs for products, categories, and manufacturers. • Added ACL support (access control list) on products and categories. • Minify and bundle JavaScript files. • Allow a store owner to decide which billing/shipping address fields are enabled/disabled/required (like it's already done for the registration page). • Moved to MVC 4 (.NET 4.5 is required). • Now Visual Studio 2012 is required to work ...SQL Server Partition Management: Partition Management Release 3.0: Release 3.0 adds support for SQL Server 2012 and is backward compatible with SQL Server 2008 and 2005. The release consists of: • A Readme file • The Executable • The source code (Visual Studio project) Enhancements include: -- Support for Columnstore indexes in SQL Server 2012 -- Ability to create TSQL scripts for staging table and index creation operations -- Full support for global date and time formats, locale independent -- Support for binary partitioning column types -- Fixes to is...NHook - A debugger API: NHook 1.0: x86 debugger Resolve symbol from MS Public server Resolve RVA from executable's image Add breakpoints Assemble / Disassemble target process assembly More information here, you can also check unit tests that are real sample code.PDF Library: PDFLib v2.0: Release notes This new version include many bug fixes and include support for stream objects and cross-reference object streams. New FeatureExtract images from the PDFDocument.Editor: 2013.5: Whats new for Document.Editor 2013.5: New Read-only File support New Check For Updates support Minor Bug Fix's, improvements and speed upsMCEBuddy 2.x: MCEBuddy 2.3.10: Critical Update to 2.3.9: Changelog for 2.3.10 (32bit and 64bit) 1. AsfBin executable missing from build 2. Removed extra references from build to avoid conflict 3. Showanalyzer installation now checked on remote engine machine Changelog for 2.3.9 (32bit and 64bit) 1. Added support for WTV output profile 2. Added support for minimizing MCEBuddy to the system tray 3. Added support for custom archive folder 4. Added support to disable subdirectory monitoring 5. Added support for better TS fil...DotNetNuke® Community Edition CMS: 07.00.00: Major Highlights Fixed issue that caused profiles of deleted users to be available Removed the postback after checkboxes are selected in Page Settings > Taxonomy Implemented the functionality required to edit security role names and social group names Fixed JavaScript error when using a ";" semicolon as a profile property Fixed issue when using DateTime properties in profiles Fixed viewstate error when using Facebook authentication in conjunction with "require valid profile fo...CODE Framework: 4.0.21128.0: See change notes in the documentation section for details on what's new.Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.76: Fixed a typo in ObjectLiteralProperty.IsConstant that caused all object literals to be treated like they were constants, and possibly moved around in the code when they shouldn't be.Kooboo CMS: Kooboo CMS 3.3.0: New features: Dropdown/Radio/Checkbox Lists no longer references the userkey. Instead they refer to the UUID field for input value. You can now delete, export, import content from database in the site settings. Labels can now be imported and exported. You can now set the required password strength and maximum number of incorrect login attempts. Child sites can inherit plugins from its parent sites. The view parameter can be changed through the page_context.current value. Addition of c...Facebook Windows 8 Sample: Facebook Windows 8 Sample: The current drop holds two versions of the sample: A basic version that uses a Facebook application to list the content of facebook page. A full version including the use of Bing Maps sdk for positioning the restaurant in a map, and showing how to get there. See Developing a Windows Store App to learn how to use the Bing Maps AJAX Control to add Bing Maps to your Windows Store app.Commerce Server Tools: Delete a Site (CS10): Updated from the Commerce Server 2002 version (Delete Site) to work with CS10. The tool will delete the CS Site, all associated resources, databases, IIS Sites, and folders disk.RaptorDB - The Document Store: v1.9.0: v1.9.0 - speed increase writing bitmap indexes to disk - bug fix hoot search with wildcards - bug fix datetime indexing with UTC time (all times are localtime) - upgrade to fastJSON v2.0.9 - upgrade to fastBinaryJSON v1.3.5 - changed CodeDOM to Reflection.Emit for MonoDroid compatibility - more optimized bitmap storage format (save offsets if smaller than WAH) - fixed path seperator character for monodroid and windows compatibility changed to Path.DirectorySeparatorChar - new generic Query i...Antenna Tracking Unit - Projet Tuteuré /w RFTronic: Présentation Projet: Ci-joint la présentation du projet par l'entreprise RFTronic.Distributed Publish/Subscribe (Pub/Sub) Event System: Distributed Pub Sub Event System Version 3.0: Important Wsp 3.0 is NOT backward compatible with Wsp 2.1. Prerequisites You need to install the Microsoft Visual C++ 2010 Redistributable Package. You can find it at: x64 http://www.microsoft.com/download/en/details.aspx?id=14632x86 http://www.microsoft.com/download/en/details.aspx?id=5555 Wsp now uses Rx (Reactive Extensions) and .Net 4.0 3.0 Enhancements I changed the topology from a hierarchy to peer-to-peer groups. This should provide much greater scalability and more fault-resi...Team Foundation Server Administration Tool: 2.2: TFS Administration Tool 2.2 supports the Team Foundation Server 2012 Object Model. Visual Studio 2012 or Team Explorer 2012 must be installed before you can install this tool. You can download and install Team Explorer 2012 from http://aka.ms/TeamExplorer2012. There are no functional changes between the previous release (2.1) and this release.New ProjectsAppWebStore: Application Store in ASP.NET MVCBaseCrafter: BaseCrafter ProjectBranding SharePoint 2013: An how-to project for Braning in SharePoint 2013Clrizr: A set of less files that automatically define color shades and font colors for use in LESS CSS enabled web applications. Code is located in /Styles/Clrizr/didxaza: proyecto para aprender a usar team fundation serverFastMapper - CONVENTION BASED MAPPER: Comming Soon Google Earth Wrapper: Google Earth c# wrapperKirikiri (TVP) 2 Core: Simplified Chinese Translation: Simplified Chinese translated version of Kirikiri (TVP) 2 Core (http://kikyou.info/tvp), based on the SVN Head development version.Linq to CRM for Silverlight: Linq to CRM framework allows Silverlgith application communicate with MS Dynamics CRM 2011 through the "LINQ to CRM" ORM layer.MovieBuddy: a simple movie UIMyPractice: Some small applications which mainly use microsoft technology, Win8 Metro, Javascript, WCF, C# and etc.MySubstitutionCipher: Substitution cipher educational programOmega Game Engine: Omega Game Engine Engine para criação de jogos 2D e 3D Direcx9/10OpenXML PowerPoint Generation: Sample Project for the use of OpenXML API 2.5 with PowerPointpdh2.0? ???? ??? Perfomance_counter? ?????.: pdh 2.0 ? ???? ?? ??.Riksdagsappen: Detta projekt ämnar att bygga en Windows 8 Store App vars mål är att sprida medvetenhet om Sveriges riksdag, dess ledamöter och deras arbete. Service Stack Docs: Maintain and generate documentation for Service Stack services directly from code.SharpDX for Rastertek tutorials: This project is introduction to the SharpDX by following the Rastertek tutorials which are written in C++.Simple Set for .net: simple set class makes it easier for students of computer science to manage sets and set related operations. It's developed in C#.Spk.Controls: The Spk.Controls is a visual control library for .NET Windows Forms.Stateless Designer: Visual Studio extension to support visual design of stateless state machinesTeamWorkProject: this project for team working training out of CompanyUsing the Microsoft Kinect to control GoogleMap: The project is a WPF application that uses Microsoft Kinect to control google maps. Feel free to learn WPF MVVM pattern and Kinect development from it!VR Player: VR Player is an experimental Virtual Reality Media Player for Head-Mounted Display devices like the Oculus Rift.VS Tool for WSS 3.0: Visual Studio (2005 and 2008) add-ons for WSS. Included: - schema.xml explorer?????????? Microsoft Office 2013 ? 1? – ????? ???????????: ?????? ???????? ???????? ??? ???????? ? ????? ??????????? ????? ??????? ?? TechEd Russia 2012.??UBBCODE: PHP????UBBCODE????，??????： 1.??????（10px ? 24px）； 2.????； 3.?????； 4.??????； 5.??????； 6.??????（????????????）； 7.??????； 8.?????； 9.?????； 10.???QQ??，??????； 11.???????（?????，??????????）； 12.?????????； 13.????????； 14.?????????； 15.?????????； 16.?????????。??????QrPortal: ???????Summary??: fff

  Read the article

• Clean Code Development & Flexible work environment - MSCC 26.10.2013

  Finally, some spare time to summarize my impressions and experiences of the recent meetup of Mauritius Software Craftsmanship Community. I already posted my comment on the event and on our social media networks: Professional - It's getting better with our meetups and I really appreciated that 'seniors' and 'juniors' were present today. Despite running a little bit out of time it was really great to see more students coming to the gathering. This time we changed location for our Saturday meetup and it worked out very well. A big thank you to Ebene Accelerator, namely Mrs Poonum, for the ability to use their meeting rooms for our community get-together. Already some weeks ago I had a very pleasant conversation with her about the MSCC aims, 'mission' and how we organise things. Additionally, I think that an environment like the Ebene Accelerator is a good choice as it acts as an incubator for young developers and start-ups. Reactions from other craftsmen Before I put my thoughts about our recent meeting down, I'd like to mention and cross-link to some of the other craftsmen that were present: "MSCC meet up is a massive knowledge gaining strategies for students, future entrepreneurs, or for geeks all around. Knowledge sharing becomes a fun. For those who have not been able to made it do subscribe on our MSCC meet up group at meetup.com." -- Nitin on Learning is fun with #MSCC #Ebene Accelerator "We then talked about the IT industry in Mauritius, salary issues in various field like system administration, software development etc. We analysed the reasons why people tend to hop from one company to another. That was a fun debate." -- Ish on MSCC meetup - Gang of Geeks "Flexible Learning Environment was quite interesting since these lines struck cords : "You're not a secretary....9 to 5 shouldn't suit you"....This allowed reflection...deep reflection....especially regarding the local mindset...which should be changed in a way which would promote creativity rather than choking it till death..." -- Yannick on 2nd MSCC Monthly Meet-up And others on Facebook... ;-) Visual impressions are available on our Meetup event page. More first time attendees We great pleasure I noticed that we have once again more first time visitors. A quick overlook showed that we had a majority of UoM students in first, second or last year. Some of them are already participating in the UoM Computer Club or are nominated as members of the Microsoft Student Partner (MSP) programme. Personally, I really appreciate the fact that the MSCC is able to gather such a broad audience. And as I wrote initially, the MSCC is technology-agnostic; we want IT people from any segment of this business. Of course, students which are about to delve into the 'real world' of working are highly welcome, and I hope that they might get one or other glimpse of experience or advice from employees. Sticking to the schedule? No, not really... And honestly, it was a good choice to go a little bit of the beaten tracks. I mean, yes we have a 'rough' agenda of topics that we would like to talk about or having a presentation about. But we keep it 'agile'. Due to the high number of new faces, we initiated another quick round of introductions and I gave a really brief overview of the MSCC. Next, we started to reflect on the Clean Code Developer (CCD) - Red Grade which we introduced on the last meetup. Nirvan was the lucky one and he did a good job on summarizing the various abbreviations of the first level of being a CCD. Actually, more interesting, we exchanged experience about the principles and practices of Red Grade, and it was very informative to get to know that Yann actually 'interviewed' a couple of friends, other students, local guys working in IT companies as well as some IT friends from India in order to counter-check on what he learned first-hand about Clean Code. Currently, he is reading the book of Robert C. Martin on that topic and I'm looking forward to his review soon. More output generates more input What seems to be like a personal mantra is working out pretty well for me since the beginning of this year. Being more active on social media networks, writing more article on my blog, starting the Mauritius Software Craftsmanship Community, and contributing more to other online communities has helped me to receive more project requests, job offers and possibilities to expand my business at IOS Indian Ocean Software Ltd. Actually, it is not a coincidence that one of the questions new craftsmen should answer during registration asks about having a personal blog. Whether you are just curious about IT, right in the middle of your Computer Studies, or already working in software development or system administration since a while you should consider to advertise and market yourself online. Easiest way to resolve this are to have online profiles on professional social media networks like LinkedIn, Xing, Twitter, and Google+ (no Facebook should be considered for private only), and considering to have a personal blog. Why? -- Be yourself, be proud of your work, and let other people know that you're passionate about your profession. Trust me, this is going to open up opportunities you might not have dreamt about... Exchanging ideas about having a professional online presence - MSCC meetup on the 26th October 2013 Furthermore, consider to put your Curriculum Vitae online, too. There are quite a number of service providers like 1ClickCV, Stack Overflow Careers 2.0, etc. which give you the ability to have an up to date CV online. At least put it on your site, next to your personal blog. Similar to what you would be able to see on my site here. Cyber Island Mauritius - are we there? A couple of weeks ago I got a 'cold' message on LinkedIn from someone living in the U.S. asking about the circumstances and conditions of the IT world of Mauritius. He has a great business idea, venture capital and is currently looking for a team of software developers (mainly mobile - iOS) for a new startup here in Mauritius. Since then we exchanged quite some details through private messages and Skype conversations, and I suggested that it might be a good chance to join our meetup through a conference call and see for yourself about potential candidates. During approximately 30 to 40 minutes the brief idea of the new startup was presented - very promising state-of-the-art technology aspects and integration of various public APIs -, and we had a good Q&A session about it. Also thanks to the excellent bandwidth provided by the Ebene Accelerator the video conference between three parties went absolutely well. Clean Code Developer - Orange Grade Hahaha - nice one... Being at the Orange Tower at Ebene and then talking about an Orange Grade as CCD. Well, once again I provided an overview of the principles and practices in that rank of Clean Code, and similar to our last meetup we discussed on the various aspect of each principle, whether someone already got in touch with it during studies or work, and how it could affect their future view on their source code. Following are the principles and practices of Clean Code Developer - Orange Grade: CCD Orange Grade - Principles Single Level of Abstraction (SLA) Single Responsibility Principle (SRP) Separation of Concerns (SoC) Source Code conventions CCD Orange Grade - Practices Issue Tracking Automated Integration Tests Reading, Reading, Reading Reviews Especially the part on reading technical books got some extra attention. We quickly gathered our views on that and came up with a result that ranges between Zero (0) and up to Fifteen (15) book titles per year. Personally, I'm keeping my progress between Six (6) and Eight (8) titles per year, but at least One (1) per quarter of a year. Which is also connected to the fact that I'm participating in the O'Reilly Reader Review Program and have a another benefit to get access to free books only by writing and publishing a review afterwards. We also had a good exchange on the extended topic of 'Reviews' - which to my opinion is abnormal difficult here in Mauritius for various reasons. As far as I can tell from my experience working with Mauritian software developers, either as colleagues, employees or during consulting services there are unfortunately two dominant pattern on that topic: Keeping quiet Running away Honestly, I have no evidence about why these are the two 'solutions' on reviews but that's the situation that I had to face over the last couple of years. Sitting together and talking about problematic issues, tackling down root causes of de-motivational activities and working on general improvements doesn't seem to have a ground within the IT world of Mauritius. Are you a typist or a creative software craftsman? - MSCC meetup on the 26th October 2013 One very good example that we talked about was the fact of 'job hoppers' as you can easily observe it on someone's CV - those people change job every single year; for no obvious reason! Frankly speaking, I wouldn't even consider an IT person like to for an interview. As a company you're investing money and effort into the abilities of your employees. Hiring someone that won't stay for a longer period is out of question. And sorry to say, these kind of IT guys smell fishy about their capabilities and more likely to cause problems than actually produce productive results. One of the reasons why there is a probation period on an employment contract is to give you the liberty to leave as early as possible in case that you don't like your new position. Don't fool yourself or waste other people's time and money by hanging around a full year only to snatch off the bonus payment... Future outlook: Developer's Conference Even though it is not official yet I already mentioned it several times during our weekly Code & Coffee sessions. The MSCC is looking forward to be able to organise or to contribute to an upcoming IT event. Currently, the rough schedule is set for April 2014 but this mainly depends on availability of location(s), a decent time frame for preparations, and the underlying procedures with public bodies to have it approved and so on. As soon as the information about date and location has been fixed there will be a 'Call for Papers' period in order to attract local IT enthusiasts to apply for a session slot and talk about their field of work and their passion in IT. More to come for sure... My resume of the day It was a great gathering and I am very pleased about the fact that we had another 15 craftsmen (plus 2 businessmen on conference call plus 2 young apprentices) in the same room, talking about IT related topics and sharing their experience as employees and students. Personally, I really appreciated the feedback from the students about their current view on their future career, and I really hope that some of them are going to pursue their dreams. Start promoting yourself and it will happen... Looking forward to your blogs! And last but not least our numbers on Meetup and Facebook have been increased as a direct consequence of this meetup. Please, spread the word about the MSCC and get your friends and colleagues to join our official site. The higher the number of craftsmen we have the better chances we have t achieve something great! Thanks!

  Read the article

• CodePlex Daily Summary for Sunday, August 26, 2012

  CodePlex Daily Summary for Sunday, August 26, 2012Popular ReleasesPhysics Helper XAML: Physics Helper XAML 1.1.0.0: This release supports creation of 2D Physics apps for Windows 8 RTM, Windows Phone 7.1 development, and Silverlight 5. It includes source code and samples in three separate solutions.TouchInjector: TouchInjector 1.0: Version 1.0BlackJumboDog: Ver5.7.1: 2012.08.25 Ver5.7.1 (1)?????·?????LING?????????????? (2)SMTP???（????）????、?????\?????????????????????Peulot Heshbon: Peulot Heshbon version 3.0.0: Available quizzes:Plus for Natural, Real and fragments Minus for Natural, Real and fragments Multiplication for Natural, Real and fragments Divide for Natural, Real and fragments Random for Natural, Real and fragments Compare 2 percentages Compare 2 fragments (Just for easy difficulty) Check if a number can be divided with another number exactly. Available Languages:Hebrew English Russian What's NewAdded new quiz: Compare 2 fragments. It is available only if you are in Eas...Visual Studio Team Foundation Server Branching and Merging Guide: v2 - Visual Studio 2012: Welcome to the Branching and Merging Guide Quality-Bar Details Documentation has been reviewed by Visual Studio ALM Rangers Documentation has been through an independent technical review Documentation has been reviewed by the quality and recording team All critical bugs have been resolved Known Issues / Bugs Spelling, grammar and content revisions are in progress. Hotfix will be published.Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.62: Fix for issue #18525 - escaped characters in CSS identifiers get double-escaped if the character immediately after the backslash is not normally allowed in an identifier. fixed symbol problem with nuget package. 4.62 should have nuget symbols available again.nopCommerce. Open source shopping cart (ASP.NET MVC): nopcommerce 2.65: As some of you may know we were planning to release version 2.70 much later (the end of September). But today we have to release this intermediate version (2.65). It fixes a critical issue caused by a third-party assembly when running nopCommerce on a server with .NET 4.5 installed. No major features have been introduced with this release as our development efforts were focused on further enhancements and fixing bugs. To see the full list of fixes and changes please visit the release notes p...MyRouter (Virtual WiFi Router): MyRouter 1.2.9: . Fix: Some missing changes for fixing the window subclassing crash. · Fix: fixed bug when Run MyRouter at the first Time. · Fix: Log File · Fix: improve performance speed application · fix: solve some Exception.eel Browser: eel 1.1.0.41 beta: Improved UI New features Bug fixesDynamics CRM 2011 Dummy Entity: First Release: This has been tested on CRM 2011 RU8 On-Premise IFD. Known Issue: The Test Dummy CRM page load event may throw an exception loading the first time as the iframe may not have finished loading. I have not been able to get the iframe OnReadyStateChange event to fire. But it is only a sample anyway. The zip file contains: Dummy Entity Visual studio solution. Test Dummy Visual Studio solution. Dummy Entity CRM Solution Test Dummy CRM Solution Installation: Unzip and import the CRM Solutions...Private cloud DMS: Essential server-client full package: Requirements: - SQL server >= 2008 (minimal Express - for Essential recommended) - .NET 4.0 (Server) - .NET 4.0 Client profile (Client) This version allow: - full file system functionality Restrictions: - Maximum 2 parallel users - No share spaces - No hosted business groups - No digital sign functionality - No ActiveDirectory connector - No Performance cache - No workflow - No messagingJavaScript Prototype Extensions: Release 1.1.0.0: Release 1.1.0.0 Add prototype extension for object. Add prototype extension for array.Glyphx: Version 1.2: This release includes the SdlDotNet.dll dependency in the setup, which you will need.TFS Project Test Migrator: TestPlanMigration v1.0.0: Release 1.0.0 This first version do not create the test cases in the target project because the goal was to restore a Test Plan + Test Suite hierarchy after a manual user deletion without restoring all the Project Collection Database. As I discovered, deleting a Test Plan will do the following : - Delete all TestSuiteEntry (the link between a Test Suite node and a Test Case) - Delete all TestSuite (the nodes in the test hierarchy), including root TestSuite - Delete the TestPlan Test c...ERPStore eCommerce FrontOffice: ERPStore.Core V4.0.0.2 MVC4 RTM: ERPStore.Core V4.0.0.2 MVC4 RTM (Code Source)ZXing.Net: ZXing.Net 0.8.0.0: sync with rev. 2393 of the java version improved API, direct support for multiple barcode decoding, wrapper for barcode generating many other improvements and fixes encoder and decoder command line clients demo client for emguCV dev documentation startedScintillaNET: ScintillaNET 2.5.1: This release has been built from the 2.5 branch. Issues closed: Issue # Title 32524 32524 32550 32550 32552 32552 25148 25148 32449 32449 32551 32551 32711 32711 MFCMAPI: August 2012 Release: Build: 15.0.0.1035 Full release notes at SGriffin's blog. If you just want to run the MFCMAPI or MrMAPI, get the executables. If you want to debug them, get the symbol files and the source. The 64 bit builds will only work on a machine with Outlook 2010 64 bit installed. All other machines should use the 32 bit builds, regardless of the operating system. Facebook BadgeDocument.Editor: 2013.2: Whats new for Document.Editor 2013.2: New save as Html document Improved Traslate support Minor Bug Fix's, improvements and speed upsPulse: Pulse Beta 5: Whats new in this release? Well to start with we now have Wallbase.cc Authentication! so you can access favorites or NSFW. This version requires .NET 4.0, you probably already have it, but if you don't it's a free and easy download from Microsoft. Pulse can bet set to start on Windows startup now too. The Wallpaper setter has settings now, so you can change the background color of the desktop and the Picture Position (Tile/Center/Fill/etc...) I've switched to Windows Forms instead of WPF...New Projects508 Compliance Validator: This tool checks aspx and ascx pages against 508 Accessibilty guidelines and also allows you to add your own rules.BF for WP: BF for WP is a visual Brainfuck interpter for Windows Phone.Climate Control: App lets you vote on whether you're too hot or too cold so the dummy next to the air con controls can adjust the thermostat.Custom Captcha Plugin for Kooboo CMS for adding content or sending feedback: Custom Captcha Plugin for Kooboo CMS for adding content or sending feedbackGalleryDownloader: This project takes aim on downloading free photogalleries through the Internet. Highly Maintainable Web Services: The Highly Maintainable Web Services project is a reference architecture application for .NET that demonstrates how to build highly maintainable web services.Its.Validation: A C# DSL for writing rules in a composable, functional style.Kaku by wifi: The projects purpose: Make your phone a part of your house hold by being able to control certail elektric devices with your phone such as, light, electric curtaLogin with Google in ASP.Net MVC3 & Get data from Google User: ASP.Net developer can use this code: asp.net mvc3 web project which contains login with google and pull data from user's google accountMabiCommerce: MabiCommerce is an advanced Commerce Calculator for the MMORPG Mabinogi.Mapture the FLAG: A location based game for wp7mn: sumSharePoint 2010: SharePoint 2010 utilitiesSHIORI.NET: ???SHIORI????????????????????Temp and Stress: Tieni sotto controllo le temperature della tua CPU e effettua Stress Test e Benchmark!VisiblityControl – An Alternative to Converters: A templated content control hosting to remove the pain of using the BooleanToVisibilityConverter. The property IsTrue determines what is shown.Whatsnexx Integration for Orchard CMS: Orchard Whatsnexx makes it easier for Orchard users to send an event to the Whatsnexx Ticket Bus service API, of the Whatsnexx GatewayWINRT \ Metro Store \ open marketing solution: This project is aimed at creating a public shopping cart, that is available to all windows 8 users free. products are screened added by administrators

  Read the article

• Uploading images from Flex to Rails using Paperclip

  - by 23tux

  Hi everyone, I'm looking for a way to upload images that were created in my flex app to rails. I've tried to use paperclip, but it don't seem to work. I've got this tutorial here: http://blog.alexonrails.net/?p=218 The problem is, that they are using a FileReference to browse for files on the clients computer. They call the .upload(...) function and send the data to the upload controller. But I'm using a URLLoader to upload a image, that is modified in my Flex-App. First, here is the code from the tutorial: private function selectHandler(event:Event):void { var vars:URLVariables = new URLVariables(); var request:URLRequest = new URLRequest(uri); request.method = URLRequestMethod.POST; vars.description = "My Description"; request.data = vars; var uploadDataFieldName:String = 'filemanager[file]'; fileReference.upload(request, uploadDataFieldName); } I don't know how to set that var uploadDataFieldName:String = 'filemanager[file]'; in a URLLoader. I've got the image data compressed as a JPEG in a ByteArray. It looks like this: public function savePicture():void { var filename:String = "blubblub.jpg"; var vars:URLVariables = new URLVariables(); vars.position = layoutView.currentPicPosition; vars.url = filename; vars.user_id = 1; vars.comic_id = 1; vars.file_content_type = "image/jpeg"; vars.file_file_name = filename; var rawBytes:ByteArray = new JPGEncoder(75).encode(bitmapdata); vars.picture = rawBytes; var request:URLRequest = new URLRequest(Data.SERVER_ADDR + "pictures/upload"); request.method = URLRequestMethod.POST; request.data = vars; var loader:URLLoader = new URLLoader(request); loader.addEventListener(Event.COMPLETE, savePictureHandler); loader.addEventListener(IOErrorEvent.IO_ERROR, errorHandlerUpload); loader.load(request); } If I set the var.picture URLVariable to the bytearray, then I get the error, that the upload is nil. Here is the Rails part: Picture-Model: require 'paperclip' class Picture < ActiveRecord::Base # relations from picture belongs_to :comic belongs_to :user has_many :picture_bubbles has_many :bubbles, :through => :picture_bubbles # attached file for picture upload -> with paperclip plugin has_attached_file :file, :path => "public/system/pictures/:basename.:extension" end and the picture controller with the upload function: class PicturesController < ApplicationController protect_from_forgery :except => :upload def upload @picture = Picture.new(params[:picture]) @picture.position = params[:position] @picture.comic_id = params[:comic_id] @picture.url = params[:url] @picture.user_id = params[:user_id] if @picture.save render(:nothing => true, :status => 200) else render(:nothing => true, :status => 500) end end end Does anyone know how to solve this problem? thx, tux

  Read the article

• Parameter index is out of range

  - by czuroski

  Hello, I am getting the following error when trying to update an object using nhibernate. I am attempting to update a field which is a foreign key. Any thoughts why I might be getting this error? I can't figure it out from that error and my log4net log doesn't give any hints either. Thanks System.IndexOutOfRangeException was unhandled by user code Message="Parameter index is out of range." Source="MySql.Data" StackTrace: at MySql.Data.MySqlClient.MySqlParameterCollection.CheckIndex(Int32 index) at MySql.Data.MySqlClient.MySqlParameterCollection.GetParameter(Int32 index) at System.Data.Common.DbParameterCollection.System.Collections.IList.get_Item(Int32 index) at NHibernate.Type.Int32Type.Set(IDbCommand rs, Object value, Int32 index) at NHibernate.Type.NullableType.NullSafeSet(IDbCommand cmd, Object value, Int32 index) at NHibernate.Type.NullableType.NullSafeSet(IDbCommand st, Object value, Int32 index, ISessionImplementor session) at NHibernate.Persister.Entity.AbstractEntityPersister.Dehydrate(Object id, Object[] fields, Object rowId, Boolean[] includeProperty, Boolean[][] includeColumns, Int32 table, IDbCommand statement, ISessionImplementor session, Int32 index) at NHibernate.Persister.Entity.AbstractEntityPersister.Update(Object id, Object[] fields, Object[] oldFields, Object rowId, Boolean[] includeProperty, Int32 j, Object oldVersion, Object obj, SqlCommandInfo sql, ISessionImplementor session) at NHibernate.Persister.Entity.AbstractEntityPersister.UpdateOrInsert(Object id, Object[] fields, Object[] oldFields, Object rowId, Boolean[] includeProperty, Int32 j, Object oldVersion, Object obj, SqlCommandInfo sql, ISessionImplementor session) at NHibernate.Persister.Entity.AbstractEntityPersister.Update(Object id, Object[] fields, Int32[] dirtyFields, Boolean hasDirtyCollection, Object[] oldFields, Object oldVersion, Object obj, Object rowId, ISessionImplementor session) at NHibernate.Action.EntityUpdateAction.Execute() at NHibernate.Engine.ActionQueue.Execute(IExecutable executable) at NHibernate.Engine.ActionQueue.ExecuteActions(IList list) at NHibernate.Engine.ActionQueue.ExecuteActions() at NHibernate.Event.Default.AbstractFlushingEventListener.PerformExecutions(IEventSource session) at NHibernate.Event.Default.DefaultFlushEventListener.OnFlush(FlushEvent event) at NHibernate.Impl.SessionImpl.Flush() at NHibernate.Transaction.AdoTransaction.Commit() at DataAccessLayer.NHibernateDataProvider.UpdateItem_temp(items_temp item_temp) in C:\Documents and Settings\user\My Documents\Visual Studio 2008\Projects\mySolution\DataAccessLayer\NHibernateDataProvider.cs:line 225 at InventoryDataClean.Controllers.ImportController.Edit(Int32 id, FormCollection formValues) in C:\Documents and Settings\user\My Documents\Visual Studio 2008\Projects\mySolution\InventoryDataClean\Controllers\ImportController.cs:line 101 at lambda_method(ExecutionScope , ControllerBase , Object[] ) at System.Web.Mvc.ActionMethodDispatcher.Execute(ControllerBase controller, Object[] parameters) at System.Web.Mvc.ReflectedActionDescriptor.Execute(ControllerContext controllerContext, IDictionary`2 parameters) at System.Web.Mvc.ControllerActionInvoker.InvokeActionMethod(ControllerContext controllerContext, ActionDescriptor actionDescriptor, IDictionary`2 parameters) at System.Web.Mvc.ControllerActionInvoker.<>c__DisplayClassa.<InvokeActionMethodWithFilters>b__7() at System.Web.Mvc.ControllerActionInvoker.InvokeActionMethodFilter(IActionFilter filter, ActionExecutingContext preContext, Func`1 continuation) InnerException: Here is my item mapping - <?xml version="1.0" encoding="utf-8" ?> <hibernate-mapping xmlns="urn:nhibernate-mapping-2.2" assembly="DataTransfer" namespace="DataTransfer"> <class name="DataTransfer.items_temp, DataTransfer" table="items_temp"> <id name="id" unsaved-value="any" > <generator class="assigned"/> </id> <property name="assetid"/> <property name="description"/> <property name="caretaker"/> <property name="category"/> <property name="status" /> <property name="vendor" /> <many-to-one name="statusName" class="status" column="status" /> </class> </hibernate-mapping> Here is my status mapping - <?xml version="1.0" encoding="utf-8" ?> <hibernate-mapping xmlns="urn:nhibernate-mapping-2.2" assembly="DataTransfer" namespace="DataTransfer"> <class name="DataTransfer.status, DataTransfer" table="status"> <id name="id" unsaved-value="0"> <generator class="assigned"/> </id> <property name="name"/> <property name="def"/> </class> </hibernate-mapping> and here is my update function - public void UpdateItem_temp(items_temp item_temp) { ITransaction t = _session.BeginTransaction(); try { _session.SaveOrUpdate(item_temp); t.Commit(); } catch (Exception) { t.Rollback(); throw; } finally { t.Dispose(); } }

  Read the article

• W3WP crashes when initializing a collection

  - by asbjornu

  I've created an ASP.NET MVC application that has an initializer attached to the PreApplicationStartMethodAttribute. When initializing, a collection is instantiated that implements an interface I've defined. When I instantiate this collection, w3wp.exe crashes with the following two incomprehensible entries in the event log: Faulting application name: w3wp.exe, version: 7.5.7600.16385, time stamp: 0x4a5bd0eb Faulting module name: clr.dll, version: 4.0.30319.1, time stamp: 0x4ba21eeb Exception code: 0xc00000fd Fault offset: 0x0000000000001177 Faulting process id: 0x1348 Faulting application start time: 0x01cb0224882f4723 Faulting application path: c:\windows\system32\inetsrv\w3wp.exe Faulting module path: C:\Windows\Microsoft.NET\Framework64\v4.0.30319\clr.dll Report Id: c6a0941e-6e17-11df-864d-000acd16dcdb And: Fault bucket , type 0 Event Name: APPCRASH Response: Not available Cab Id: 0 Problem signature: P1: w3wp.exe P2: 7.5.7600.16385 P3: 4a5bd0eb P4: clr.dll P5: 4.0.30319.1 P6: 4ba21eeb P7: c00000fd P8: 0000000000001177 P9: P10: Attached files: These files may be available here: Analysis symbol: Rechecking for solution: 0 Report Id: c6a0941e-6e17-11df-864d-000acd16dcdb Report Status: 0 If I remove the instantiation of the collection, the application starts normally. If I leave the instantiation, w3wp crashes. If I modify the interface, w3wp still crashes. I've tried every variation I could come up with on the theme of keeping the instantiation but doing everything else differently, but w3wp still crashes. My biggest issue here is that I have absolutely no idea why w3wp is crashing. It's not a StackOverflowException or anything concrete like that, all I get is the unintelligent junk cited above. I've tried to use DebugDiag and IISState to debug the w3wp process, but DebugDiag is only available for post-dump analysis in x64 (I'm running on Windows 7 x64, so the w3wp process is thus 64 bit) and IISStat says the following when I try to run it: D:\Programs\iisstate>IISState.exe -p 9204 -d Symbol search path is: SRV*D:\Programs\iisstate\symbols*http://msdl.microsoft.com/download/symbols IISState is limited to processes associated with IIS. If you require a generic debugger, please use WinDBG or CDB. They are available for download from http://www.microsoft.com/ddk/debugging. This error may also occur if a debugger is already attached to the process being checked. Incorrect Process Attachment I've double-checked 10 times that the process ID of my w3wp process is correct. I'm suspecting that IISState too only can debug x86 processes. Setting a breakpoint anywhere in the application does absolutely nothing. The break point isn't hit and w3wp crashes as soon as the request comes through to IIS from the browser. Starting the application with F5 in Visual Studio 2010 or starting another application to get the w3wp process up and running and then attaching the VS2010 debugger to it and then visiting the faulting application doesn't help. I've also tried to add an HTTP module as described in KB-911816 as well as add this to my web.config file: <configuration> <runtime> <legacyUnhandledExceptionPolicy enabled="true" /> </runtime> </configuration> Needless to say, it makes absolutely no difference. So I'm left with no way to debug the w3wp process, no way to extract any information from it and complete garbage dumped in my event log. If anybody has any idea on how to debug this problem, please let me know! Update My collection was initialized based on RouteTable.Routes which might have thrown an exception (perhaps by not being initialized itself yet in such an early stage of the ASP.NET lifecycle). Postponing the communication with RouteTable.Routes until a later stage solved the problem. While I don't really need an answer to this question anymore, I still find it so obscure that I'll leave it for anyone to comment on and answer, because I found no existing posts on this problem anywhere, so it might be of good reference in the future.

  Read the article

• events not getting fired properly

  - by prince23

  hi, this is my xaml code. datagrid within another data grid. <sdk:DataGrid x:Name="dgLevel1" AutoGenerateColumns="False" VerticalAlignment="Top" IsReadOnly="True" Margin="12,12,0,0" RowDetailsVisibilityChanged="dgLevel1_RowDetailsVisibilityChanged" SelectionMode="Extended" RowDetailsVisibilityMode="VisibleWhenSelected" Height="412" HorizontalAlignment="Left" Width="816"> <sdk:DataGrid.Columns> <sdk:DataGridTemplateColumn> <sdk:DataGridTemplateColumn.CellTemplate> <DataTemplate> <Button x:Name="myButton" Width="24" Height="24" Click="ExpandLevel1_Click"> <Image x:Name="imgLevel1" Source="Images/detail.JPG" Stretch="None"/> </Button> </DataTemplate> </sdk:DataGridTemplateColumn.CellTemplate> </sdk:DataGridTemplateColumn> <sdk:DataGridTemplateColumn Header="Actual" Visibility="Collapsed"> <sdk:DataGridTemplateColumn.CellTemplate> <DataTemplate > <sdk:Label Content="{Binding UniqueName}" /> </DataTemplate> </sdk:DataGridTemplateColumn.CellTemplate> </sdk:DataGridTemplateColumn> <sdk:DataGridTextColumn Binding="{Binding Name}" Header="Name" Width="550" /> <!--<sdk:DataGridTextColumn Binding="{Binding UniqueName}" Visibility="Collapsed"/>--> <sdk:DataGridTemplateColumn Header="Actual" Width="80" > <sdk:DataGridTemplateColumn.CellTemplate> <DataTemplate > <sdk:Label Content="{Binding Age}" /> </DataTemplate> </sdk:DataGridTemplateColumn.CellTemplate> </sdk:DataGridTemplateColumn> </sdk:DataGrid.Columns> <sdk:DataGrid.RowDetailsTemplate> <DataTemplate> <StackPanel Width="805"> <sdk:DataGrid x:Name="dgLevel2" Width="797" Margin="17,0,0,0" HeadersVisibility ="None" AutoGenerateColumns="False" HorizontalAlignment="Center" IsReadOnly="True" RowDetailsVisibilityChanged="dgLevel2_RowDetailsVisibilityChanged" SelectionMode="Extended" RowDetailsVisibilityMode="VisibleWhenSelected"> <sdk:DataGrid.Columns> <sdk:DataGridTemplateColumn> <sdk:DataGridTemplateColumn.CellTemplate> <DataTemplate> <Button x:Name="myButton" Width="24" Height="30" Click="ExpandLevel2_Click"> <Image x:Name="imgLevel2" Source="Images/detail.JPG" Stretch="None"/> </Button> </DataTemplate> </sdk:DataGridTemplateColumn.CellTemplate> </sdk:DataGridTemplateColumn> <sdk:DataGridTextColumn Binding="{Binding School}" Width="528" /> <sdk:DataGridTextColumn Binding="{Binding College}" Visibility="Collapsed" /> <sdk:DataGridTemplateColumn Header="Actual" Width="80"> <sdk:DataGridTemplateColumn.CellTemplate> <DataTemplate > <sdk:Label Content="{Binding DOB}" /> </DataTemplate> </sdk:DataGridTemplateColumn.CellTemplate> </sdk:DataGridTemplateColumn> </sdk:DataGrid.Columns> </sdk:DataGrid> </StackPanel> </DataTemplate> </sdk:DataGrid.RowDetailsTemplate> </sdk:DataGrid> i have 2 data grid and have 2 image buttons in both the grid . but the event which is in datagrid ExpandLevel1 _Click and ExpandLevel2 _Click is not getting fired properly. some times get fired some times no when i click the button first this event gets fired then ExpandLevel1_Click then **dgLevel1_RowDetailsVisibilityChanged . same thing is happening for the datagrid 2 ExpandLevel2_Click then dgLevel2_RowDetailsVisibilityChanged** there are scenario where first datagrid event gets fired first then button click events why is this happening .is there any solution for this looking forward an solutions thanks in advance. prince

  Read the article

• Setting Session Variable from UpdatePanel

  - by Gavin

  I am using ASP.NET 2.0 AJAX Extensions 1.0 with the version v1.0.20229 of the AJAX Control Toolkit (which to my knowledge is the latest for .NET 2.0/Visual Studio 2005). My web page (aspx) has a DropDownList control on an UpdatePanel. In the handler for the DropDownList's SelectedIndexChanged event I attempt to set a session variable. The first time the event is fired, I get a Sys.WebForms.PageRequestManagerParserErrorException: "The message received from the server could not be parsed". If I continue, subsequent SelectedIndexChanged's are handled successfully. I have stumbled upon a solution whereby if I initialise the session variable in my Page_Load (so the event handler is just setting the value of a session variable that already exists as opposed to creating a new one) the problem goes away. I'm happy to do this, but I'm curious as to exactly what the underlying cause is. Can anyone explain? (My suspicion is that setting the session variable receives a response from the server which is then returned to the 'caller', but it's not the sort of response it knows how to deal with causing the exception?) EDIT: I reproduced the problem in a seperate little project: Default.aspx <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="Default.aspx.cs" Inherits="SessionTest._Default" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" > <head runat="server"> <title>Untitled Page</title> </head> <body> <form id="form1" runat="server"> <asp:ScriptManager ID="ScriptManager1" runat="server" /> <div> <asp:UpdatePanel id="upCategorySelector" runat="server"> <ContentTemplate> Category: <asp:DropDownList ID="ddlCategory" runat="server" AutoPostBack="true" OnSelectedIndexChanged="ddlCategories_SelectedIndexChanged"> <asp:ListItem>Item 1</asp:ListItem> <asp:ListItem>Item 2</asp:ListItem> <asp:ListItem>Item 3</asp:ListItem> </asp:DropDownList> </ContentTemplate> </asp:UpdatePanel> </div> </form> </body> </html> Default.aspx.cs using System; using System.Data; using System.Configuration; using System.Collections; using System.Web; using System.Web.Security; using System.Web.UI; using System.Web.UI.WebControls; using System.Web.UI.WebControls.WebParts; using System.Web.UI.HtmlControls; namespace SessionTest { public partial class _Default : System.Web.UI.Page { protected void Page_Load(object sender, EventArgs e) { // If I do this, the exception does not occur. if (Session["key"] == null) Session.Add("key", 0); } protected void ddlCategories_SelectedIndexChanged(object sender, EventArgs e) { // If Session["key"] has not been created, setting it from // the async call causes the excaption Session.Add("key", ((DropDownList)sender).SelectedValue); } } }

  Read the article

• How to get objects to react to touches in Cocos2D?

  - by Wayfarer

  Alright, so I'm starting to learn more about Coco2D, but I'm kinda frusterated. A lot of the tutorials I have found are for outdated versions of the code, so when I look through and see how they do certain things, I can't translate it into my own program, because a lot has changed. With that being said, I am working in the latest version of Coco2d, version 0.99. What I want to do is create a sprite on the screen (Done) and then when I touch that sprite, I can have "something" happen. For now, let's just make an alert go off. Now, I got this code working with the help of a friend. Here is the header file: // When you import this file, you import all the cocos2d classes #import "cocos2d.h" // HelloWorld Layer @interface HelloWorld : CCLayer { CGRect spRect; } // returns a Scene that contains the HelloWorld as the only child +(id) scene; @end And here is the implementation file: // // cocos2d Hello World example // http://www.cocos2d-iphone.org // // Import the interfaces #import "HelloWorldScene.h" #import "CustomCCNode.h" // HelloWorld implementation @implementation HelloWorld +(id) scene { // 'scene' is an autorelease object. CCScene *scene = [CCScene node]; // 'layer' is an autorelease object. HelloWorld *layer = [HelloWorld node]; // add layer as a child to scene [scene addChild: layer]; // return the scene return scene; } // on "init" you need to initialize your instance -(id) init { // always call "super" init // Apple recommends to re-assign "self" with the "super" return value if( (self=[super init] )) { // create and initialize a Label CCLabel* label = [CCLabel labelWithString:@"Hello World" fontName:@"Times New Roman" fontSize:64]; // ask director the the window size CGSize size = [[CCDirector sharedDirector] winSize]; // position the label on the center of the screen label.position = ccp( size.width /2 , size.height/2 ); // add the label as a child to this Layer [self addChild: label]; CCSprite *sp = [CCSprite spriteWithFile:@"test2.png"]; sp.position = ccp(300,200); [self addChild:sp]; float w = [sp contentSize].width; float h = [sp contentSize].height; CGPoint aPoint = CGPointMake([sp position].x - (w/2), [sp position].y - (h/2)); spRect = CGRectMake(aPoint.x, aPoint.y, w, h); CCSprite *sprite2 = [CCSprite spriteWithFile:@"test3.png"]; sprite2.position = ccp(100,100); [self addChild:sprite2]; //[self registerWithTouchDispatcher]; self.isTouchEnabled = YES; } return self; } // on "dealloc" you need to release all your retained objects - (void) dealloc { // in case you have something to dealloc, do it in this method // in this particular example nothing needs to be released. // cocos2d will automatically release all the children (Label) // don't forget to call "super dealloc" [super dealloc]; } - (void)ccTouchesEnded:(NSSet *)touches withEvent:(UIEvent *)event { UITouch *touch = [touches anyObject]; //CGPoint location = [[CCDirector sharedDirector] convertCoordinate:[touch locationInView:touch.view]]; CGPoint location = [touch locationInView:[touch view]]; location = [[CCDirector sharedDirector] convertToGL:location]; if (CGRectContainsPoint(spRect, location)) { UIAlertView *alert = [[UIAlertView alloc] initWithTitle:@"Win" message:@"testing" delegate:nil cancelButtonTitle:@"okay" otherButtonTitles:nil]; [alert show]; [alert release]; NSLog(@"TOUCHES"); } NSLog(@"Touch got"); } However, this only works for 1 object, the sprite which I create the CGRect for. I can't do it for 2 sprites, which I was testing. So my question is this: How can I have all sprites on the screen react to the same event when touched? For my program, the same event needs to be run for all objects of the same type, so that should make it a tad easier. I tried making a subclass of CCNode and over write the method, but that just didn't work at all... so I'm doing something wrong. Help would be appreciated!

  Read the article

• How to configure a GridView CommandField to trigger Full Page Update in UpdatePanel

  - by Frinavale

  I have 2 user controls on my page. One is used for searching, and the other is used for editing (along with a few other things). The user control that provides the search functionality uses a GridView to display the search results. This GridView has a CommandField used for editing (showEditButton="true"). I would like to place the GridView into an UpdatePanel so that paging through the search results will be smooth. The thing is that when the user clicks the Edit Link (the CommandField) I need to preform a full page postback so that the search user control can be hidden and the edit user control can be displayed. Edit: the reason I need to do a full page postback is because the edit user control is outside of the UpdatePanel that my GridView is in. It is not only outside the UpdatePanel, but it's in a completely different user control. I have no idea how to add the CommandField as a full page postback trigger to the UpdatePanel. The PostBackTrigger (which is used to indicate the controls cause a full page postback) takes a ControlID as a parameter; however the CommandButton does not have an ID...and you can see why I'm having a problem with this. Update on what else I've tried to solve the problem: I took a new approach to solving the problem. In my new approach, I used a TemplateField instead of a CommandField. I placed a LinkButton control in the TemplateField and gave it a name. During the GridView's RowDataBound event I retrieved the LinkButton control and added it to the UpdatePanel's Triggers. This is the ASP Markup for the UpdatePanel and the GridView <asp:UpdatePanel ID="SearchResultsUpdateSection" runat="server"> <ContentTemplate> <asp:GridView ID="SearchResultsGrid" runat="server" AllowPaging="true" AutoGenerateColumns="false"> <Columns> <asp:TemplateField> <HeaderTemplate></HeaderTemplate> <ItemTemplate> <asp:LinkButton ID="Edit" runat="server" Text="Edit"></asp:LinkButton> </ItemTemplate> </asp:TemplateField> <asp:BoundField ...... </Columns> </asp:GridView> </ContentTemplate> </asp:UpdatePanel> In my VB.NET code. I implemented a function that handles the GridView's RowDataBound event. In this method I find the LinkButton for the row being bound to, create a PostBackTrigger for the LinkButton, and add it to the UpdatePanel's Triggers. This means that a PostBackTrigger is created for every "edit" LinkButton in the GridView Edit: this did not create a PostBackTrigger for Every "edit" LinkButton because the ID is the same for all LinkButtons in the GridView. Private Sub SearchResultsGrid_RowDataBound(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.GridViewRowEventArgs) Handles SearchResultsGrod.RowDataBound If e.Row.RowType = DataControlRowType.Header Then ''I am doing stuff here that does not pertain to the problem Else Dim editLink As LinkButton = CType(e.Row.FindControl("Edit"), LinkButton) If editLink IsNot Nothing Then Dim fullPageTrigger As New PostBackTrigger fullPageTrigger.ControlID = editLink.ID SearchResultsUpdateSection.Triggers.Add(fullPageTrigger) End If End If End Sub And instead of handling the GridView's RowEditing event for editing purposes i use the RowCommand instead. Private Sub SearchResultsGrid_RowCommand(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.GridViewCommandEventArgs) Handles SearchResultsGrid.RowCommand RaiseEvent EditRecord(Me, New EventArgs()) End Sub This new approach didn't work at all because all of the LinkButtons in the GridView have the same ID. After reading the MSDN article on the UpdatePanel.Triggers Property I have the impression that Triggers can only be defined declaratively. This would mean that anything I did in the VB code wouldn't work. Any advise would be greatly appreciated. Thanks, -Frinny

  Read the article

• OnSelectedIndexChange only fires on second click when using custom page validation script

  - by Kris P

  Okay.. this is hard to explain, so here it goes. I have an update panel which contains a number of controls. The update panel is triggered by the OnSelectedIndexChanged event of a dropdownlist called: ddlUSCitizenshipStatus. It works as expected when I selected a new item. However, if I leave ddlUSCitizenshipStatus with the default value, and then click "submit" button on the page, the requiredfieldvalidators say there is an error on ddlUSCitizenshipStatus (which it should, as I never selected a value). So I then choose a value, the error message goes away on ddlUSCitizenshipStatus, however the updatepanel does not refresh. I've debugged this locally and the OnSelectedIndexChanged event for ddlUSCitizenshipStatus does not fire. If I choose an item in the ddlUSCitizenshipStatus list a second time, the OnSelectedIndexChanged server event fires and the update panel refreshes and works as expected. The issue is, I have to select an item in ddlUSCitizenshipStatus twice, after failed validation, before the updatepanel it's sitting in updates. The submit button on the page looks like this: <asp:LinkButton ID="btnSubmitPage1" runat="server" CssClass="continueButton" OnClick="btnSubmitPage1_Click" CausesValidation="true" OnClientClick="javascript: return ValidatePage();" /> If I remove my custom OnClientClick script, making the submit button look like this: <asp:LinkButton ID="btnSubmitPage1" runat="server" CssClass="continueButton" OnClick="btnSubmitPage1_Click" CausesValidation="true" ValidationGroup="valGrpAdditionalInformation" /> The dropdownlist, update panel, and reguiredfieldvalidator all work as expected. However, I need to run that custom "ValidatePage()" script when the button is clicked. Below is what my ValidatePage script looks like. I've been troubleshooting this for more hours than I can count.... I hope someone is able to help me. Please let me know if you can figure out why ddlUSCitizenshipStatus doesn't update the updatepanel until the second click after a failed validation. function ValidatePage() { var blnDoPostBack = true; if (typeof(Page_ClientValidate) == 'function' ) { //Client side validation can occur, so lets do it. //Validate each validation group. for( var i = 0; i < Page_ValidationSummaries.length; i++ ) Page_ClientValidate( Page_ValidationSummaries[i].validationGroup.toString() ); //Validate every validation control on the page. for (var i = 0; i < Page_Validators.length; i++) ValidatorValidate(Page_Validators[i]); //Figure out which validation groups have errors, store a list of these validation groups in an array. var aryValGrpsWithErrors = []; for( var i = 0; i < Page_Validators.length; i++ ) { if( !Page_Validators[i].isvalid ) { //This particular validator has thrown an error. //Remeber to not do a postback, as we were able to catch this validation error client side. blnDoPostBack = false; //If we haven't already registered the validation group this erroring validation control is a part of, do so now. if( aryValGrpsWithErrors.indexOf( Page_Validators[i].validationGroup.toString() ) == -1 ) aryValGrpsWithErrors[aryValGrpsWithErrors.length++] = Page_Validators[i].validationGroup.toString(); } } //Now display every validation summary that has !isvalid validation controls in it. for( var i = 0; i < Page_ValidationSummaries.length; i++ ) { if( aryValGrpsWithErrors.indexOf( Page_ValidationSummaries[i].validationGroup.toString() ) != -1 ) { Page_ValidationSummaries[i].style.display = ""; document.getElementById( Page_ValidationSummaries[i].id.toString() + "Wrapper" ).style.display = ""; } else { //The current validation summary does not have any error messages in it, so make sure it's hidden. Page_ValidationSummaries[i].style.display = "none"; document.getElementById( Page_ValidationSummaries[i].id.toString() + "Wrapper" ).style.display = "none"; } } } return blnDoPostBack; }

  Read the article

• Alternative to google map api, so that I can use it on a HTTPS/SSL encrypted website.

  - by Zeeshan Rang

  I did find a solution for this on Google map api page, and I made the following changes as mentioned in it. 1.Use Google Maps API for Flash version 1.9a or later. 2.Add the following to your Flash application before the map is instantiated: Security.allowInsecureDomain("maps.googleapis.com"); Ref:http://code.google.com/apis/maps/faq.html#flash_ssl My code looks like this, after the changes: <mx:TitleWindow verticalAlign="middle" horizontalAlign="center" xmlns:mx="http://www.adobe.com/2006/mxml" xmlns:maps="com.google.maps.*" width="1000" height="600" layout="absolute" backgroundAlpha="0" borderAlpha="0" borderThickness="0" showCloseButton="true" close="PopUpManager.removePopUp(this);"> <mx:VBox width="70%" height="100%" > <maps:Map id="map" key="ABQIAAAA0L1JEoR6rWjh-BBQnLMtMBSVuZ5VlaqlIqiYPFMK_I5M2UTmHhSq_BJxLHiYcTDW9RxSF6HewNY7uA" mapevent_mapready="onMapReady(event)" width="100%" height="100%" /> </mx:VBox> <mx:Script> <![CDATA[ //import flashx.textLayout.formats.Direction; import mx.effects.AddItemAction; //import flashx.textLayout.factory.TruncationOptions; import mx.controls.Alert; import mx.managers.PopUpManager; import mx.rpc.events.ResultEvent; import com.adobe.serialization.json.JSON; import flash.events.Event; import com.google.maps.*; import com.google.maps.overlays.*; import com.google.maps.services.*; import com.google.maps.controls.ZoomControl; import com.google.maps.controls.PositionControl; import com.google.maps.controls.MapTypeControl; import com.google.maps.services.ClientGeocoderOptions; import com.google.maps.LatLng; import com.google.maps.Map; import com.google.maps.MapEvent; import com.google.maps.MapMouseEvent; import com.google.maps.MapType; import com.google.maps.services.ClientGeocoder; import com.google.maps.services.GeocodingEvent; import com.google.maps.overlays.Marker; import com.google.maps.overlays.MarkerOptions; import com.google.maps.InfoWindowOptions; private function onMapReady(event:MapEvent):void { Security.allowInsecureDomain("maps.googleapis.com"); map.setCenter(new LatLng(41.651505,-72.094455), 13, MapType.NORMAL_MAP_TYPE); map.addControl(new ZoomControl()); map.addControl(new PositionControl()); map.addControl(new MapTypeControl()); map.enableScrollWheelZoom(); map.enableContinuousZoom(); } ]]> </mx:Script> </mx:TitleWindow> But i still get the following error using this: The requested URL /mapsapi/publicapi?file=flashapi&url=https%3A%2F%2Fvirtual.c7beta.com%2Findex_cloud.swf&key=ABQIAAAA0L1JEoR6rWjh-BBQnLMtMBTW_Qkp6J0z76Etz3qzo8Hg3HdUQhSnD6lqp53NB0UrBmg5Xm2DlazWqA&v=1.18&flc=xt was not found on this server. Any suggestions to what am I doing wrong here, what should i do to make this work. Regards zee

  Read the article

• JPA thinks I'm deleting a detached object

  - by Steve

  So, I've got a DAO that I used to load and save my domain objects using JPA. I finally managed to get the transaction stuff working (with a bunch of help from the folks here...), now I've got another issue. In my test case, I call my DAO to load a domain object with a given id, check that it got loaded and then call the same DAO to delete the object I just loaded. When I do that I get the following: java.lang.IllegalArgumentException: Removing a detached instance mil.navy.ndms.conops.common.model.impl.jpa.Group#10 at org.hibernate.ejb.event.EJB3DeleteEventListener.performDetachedEntityDeletionCheck(EJB3DeleteEventListener.java:45) at org.hibernate.event.def.DefaultDeleteEventListener.onDelete(DefaultDeleteEventListener.java:108) at org.hibernate.event.def.DefaultDeleteEventListener.onDelete(DefaultDeleteEventListener.java:74) at org.hibernate.impl.SessionImpl.fireDelete(SessionImpl.java:794) at org.hibernate.impl.SessionImpl.delete(SessionImpl.java:772) at org.hibernate.ejb.AbstractEntityManagerImpl.remove(AbstractEntityManagerImpl.java:253) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:48) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:37) at java.lang.reflect.Method.invoke(Method.java:600) at org.springframework.orm.jpa.SharedEntityManagerCreator$SharedEntityManagerInvocationHandler.invoke(SharedEntityManagerCreator.java:180) at $Proxy27.remove(Unknown Source) at mil.navy.ndms.conops.common.dao.impl.jpa.GroupDao.delete(GroupDao.java:499) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:48) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:37) at java.lang.reflect.Method.invoke(Method.java:600) at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:304) at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182) at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149) at org.springframework.transaction.interceptor.TransactionInterceptor.invoke(TransactionInterceptor.java:106) at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171) at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204) at $Proxy28.delete(Unknown Source) at mil.navy.ndms.conops.common.dao.impl.jpa.GroupDaoTest.testGroupDaoSave(GroupDaoTest.java:89) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:48) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:37) at java.lang.reflect.Method.invoke(Method.java:600) at junit.framework.TestCase.runTest(TestCase.java:164) at junit.framework.TestCase.runBare(TestCase.java:130) at junit.framework.TestResult$1.protect(TestResult.java:106) at junit.framework.TestResult.runProtected(TestResult.java:124) at junit.framework.TestResult.run(TestResult.java:109) at junit.framework.TestCase.run(TestCase.java:120) at junit.framework.TestSuite.runTest(TestSuite.java:230) at junit.framework.TestSuite.run(TestSuite.java:225) at org.eclipse.jdt.internal.junit.runner.junit3.JUnit3TestReference.run(JUnit3TestReference.java:130) at org.eclipse.jdt.internal.junit.runner.TestExecution.run(TestExecution.java:38) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:460) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:673) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.run(RemoteTestRunner.java:386) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.main(RemoteTestRunner.java:196) Now given that I'm using the same DAO instance, and I've not changed EntityManagers (unless Spring does so without letting me know), how can this be a detached object? My DAO code looks like this: public class GenericJPADao implements IWebDao, IDao, IDaoUtil { private static Logger logger = Logger.getLogger (GenericJPADao.class); protected Class voClass; @PersistenceContext(unitName = "CONOPS_PU") protected EntityManagerFactory emf; @PersistenceContext(unitName = "CONOPS_PU") protected EntityManager em; public GenericJPADao() { super ( ); ParameterizedType genericSuperclass = (ParameterizedType) getClass ( ).getGenericSuperclass ( ); this.voClass = (Class) genericSuperclass.getActualTypeArguments ( )[1]; } ... public void delete (INTFC modelObj, EntityManager em) { em.remove (modelObj); } @SuppressWarnings("unchecked") public INTFC findById (Long id) { return ((INTFC) em.find (voClass, id)); } } The test case code looks like: IGroup loadedGroup = dao.findById (group.getId ( )); assertNotNull (loadedGroup); assertEquals (group.getId ( ), loadedGroup.getId ( )); dao.delete (loadedGroup); // - This generates the above exception loadedGroup = dao.findById (group.getId ( )); assertNull(loadedGroup); Can anyone tell me what I'm doing wrong here? Thanks

  Read the article

• Flex 4, chart, Error 1009

  - by Stephane

  Hello, I am new to flex development and I am stuck with this error TypeError: Error #1009: Cannot access a property or method of a null object reference. at mx.charts.series::LineSeries/findDataPoints()[E:\dev\4.0.0\frameworks\projects\datavisualization\src\mx\charts\series\LineSeries.as:1460] at mx.charts.chartClasses::ChartBase/findDataPoints()[E:\dev\4.0.0\frameworks\projects\datavisualization\src\mx\charts\chartClasses\ChartBase.as:2202] at mx.charts.chartClasses::ChartBase/mouseMoveHandler()[E:\dev\4.0.0\frameworks\projects\datavisualization\src\mx\charts\chartClasses\ChartBase.as:4882] I try to create a chart where I can move the points with the mouse I notice that the error doesn't occur if I move the point very slowly I have try to use the debugger and pint some debug every where without success All the behaviours were ok until I had the modifyData Please let me know if you have some experience with this kind of error I will appreciate any help. Is it also possible to remove the error throwing because after that the error occur if I click the dismiss all error button then the component work great there is the simple code of the chart <fx:Declarations> </fx:Declarations> <fx:Script> <![CDATA[ import mx.charts.HitData; import mx.charts.events.ChartEvent; import mx.charts.events.ChartItemEvent; import mx.collections.ArrayCollection; [Bindable] private var selectItem:Object; [Bindable] private var chartMouseY:int; [Bindable] private var hitData:Boolean=false; [Bindable] private var profitPeriods:ArrayCollection = new ArrayCollection( [ { period: "Qtr1 2006", profit: 32 }, { period: "Qtr2 2006", profit: 47 }, { period: "Qtr3 2006", profit: 62 }, { period: "Qtr4 2006", profit: 35 }, { period: "Qtr1 2007", profit: 25 }, { period: "Qtr2 2007", profit: 55 } ]); public function chartMouseUp(e:MouseEvent):void{ if(hitData){ hitData = false; } } private function chartMouseMove(e:MouseEvent):void { if(hitData){ var p:Point = new Point(linechart.mouseX,linechart.mouseY); var d:Array = linechart.localToData(p); chartMouseY=d[1]; modifyData(); } } public function modifyData():void { var idx:int = profitPeriods.getItemIndex(selectItem); var item:Object = profitPeriods.getItemAt(idx); item.profit = chartMouseY; profitPeriods.setItemAt(item,idx); } public function chartMouseDown(e:MouseEvent):void{ if(!hitData){ var hda:Array = linechart.findDataPoints(e.currentTarget.mouseX, e.currentTarget.mouseY); if (hda[0]) { selectItem = hda[0].item; hitData = true; } } } ]]> </fx:Script> <s:layout> <s:HorizontalLayout horizontalAlign="center" verticalAlign="middle" /> </s:layout> <s:Panel title="LineChart Control" > <s:VGroup > <s:HGroup> <mx:LineChart id="linechart" color="0x323232" height="500" width="377" mouseDown="chartMouseDown(event)" mouseMove="chartMouseMove(event)" mouseUp="chartMouseUp(event)" showDataTips="true" dataProvider="{profitPeriods}" > <mx:horizontalAxis> <mx:CategoryAxis categoryField="period"/> </mx:horizontalAxis> <mx:series> <mx:LineSeries yField="profit" form="segment" displayName="Profit"/> </mx:series> </mx:LineChart> <mx:Legend dataProvider="{linechart}" color="0x323232"/> </s:HGroup> <mx:Form> <mx:TextArea id="DEBUG" height="200" width="300"/> </mx:Form> </s:VGroup> </s:Panel> UPDATE 30/2010 : the null object is _renderData.filteredCache from the chartline the code call before error is the default mouseMoveHandler of chartBase to chartline. Is it possible to remove it ? or provide a filteredCache

  Read the article

• NHibernate MySQL Composite-Key

  - by LnDCobra

  I am trying to create a composite key that mimicks the set of PrimaryKeys in the built in MySQL.DB table. The Db primary key is as follows: Field | Type | Null | ---------------------------------- Host | char(60) | No | Db | char(64) | No | User | char(16) | No | This is my DataBasePrivilege.hbm.xml file <?xml version="1.0" encoding="utf-8" ?> <hibernate-mapping xmlns="urn:nhibernate-mapping-2.2" assembly="TGS.MySQL.DataBaseObjects" namespace="TGS.MySQL.DataBaseObjects"> <class name="TGS.MySQL.DataBaseObjects.DataBasePrivilege,TGS.MySQL.DataBaseObjects" table="db"> <composite-id name="CompositeKey" class="TGS.MySQL.DataBaseObjects.DataBasePrivilegePrimaryKey, TGS.MySQL.DataBaseObjects"> <key-property name="Host" column="Host" type="char" length="60" /> <key-property name="DataBase" column="Db" type="char" length="64" /> <key-property name="User" column="User" type="char" length="16" /> </composite-id> </class> </hibernate-mapping> The following are my 2 classes for my composite key: namespace TGS.MySQL.DataBaseObjects { public class DataBasePrivilege { public virtual DataBasePrivilegePrimaryKey CompositeKey { get; set; } } public class DataBasePrivilegePrimaryKey { public string Host { get; set; } public string DataBase { get; set; } public string User { get; set; } public override bool Equals(object obj) { if (ReferenceEquals(null, obj)) return false; if (ReferenceEquals(this, obj)) return true; if (obj.GetType() != typeof (DataBasePrivilegePrimaryKey)) return false; return Equals((DataBasePrivilegePrimaryKey) obj); } public bool Equals(DataBasePrivilegePrimaryKey other) { if (ReferenceEquals(null, other)) return false; if (ReferenceEquals(this, other)) return true; return Equals(other.Host, Host) && Equals(other.DataBase, DataBase) && Equals(other.User, User); } public override int GetHashCode() { unchecked { int result = (Host != null ? Host.GetHashCode() : 0); result = (result*397) ^ (DataBase != null ? DataBase.GetHashCode() : 0); result = (result*397) ^ (User != null ? User.GetHashCode() : 0); return result; } } } } And the following is the exception I am getting: Execute System.InvalidCastException: Unable to cast object of type 'System.Object[]' to type 'TGS.MySQL.DataBaseObjects.DataBasePrivilegePrimaryKey'. at (Object , GetterCallback ) at NHibernate.Bytecode.Lightweight.AccessOptimizer.GetPropertyValues(Object target) at NHibernate.Tuple.Component.PocoComponentTuplizer.GetPropertyValues(Object component) at NHibernate.Type.ComponentType.GetPropertyValues(Object component, EntityMode entityMode) at NHibernate.Type.ComponentType.GetHashCode(Object x, EntityMode entityMode) at NHibernate.Type.ComponentType.GetHashCode(Object x, EntityMode entityMode, ISessionFactoryImplementor factory) at NHibernate.Engine.EntityKey.GenerateHashCode() at NHibernate.Engine.EntityKey..ctor(Object identifier, String rootEntityName, String entityName, IType identifierType, Boolean batchLoadable, ISessionFactoryImplementor factory, EntityMode entityMode) at NHibernate.Engine.EntityKey..ctor(Object id, IEntityPersister persister, EntityMode entityMode) at NHibernate.Event.Default.DefaultLoadEventListener.OnLoad(LoadEvent event, LoadType loadType) at NHibernate.Impl.SessionImpl.FireLoad(LoadEvent event, LoadType loadType) at NHibernate.Impl.SessionImpl.Get(String entityName, Object id) at NHibernate.Impl.SessionImpl.Get(Type entityClass, Object id) at NHibernate.Impl.SessionImpl.Get[T](Object id) at TGS.MySQL.DataBase.DataProvider.GetDatabasePrivilegeByHostDbUser(String host, String db, String user) in C:\Documents and Settings\Michal\My Documents\Visual Studio 2008\Projects\TGS\TGS.MySQL.DataBase\DataProvider.cs:line 20 at TGS.UserAccountControl.UserAccountManager.GetDatabasePrivilegeByHostDbUser(String host, String db, String user) in C:\Documents and Settings\Michal\My Documents\Visual Studio 2008\Projects\TGS\TGS.UserAccountControl\UserAccountManager.cs:line 10 at TGS.UserAccountControlTest.UserAccountManagerTest.CanGetDataBasePrivilegeByHostDbUser() in C:\Documents and Settings\Michal\My Documents\Visual Studio 2008\Projects\TGS\TGS.UserAccountControlTest\UserAccountManagerTest.cs:line 12 I am new to NHibernate and any help would be appreciated. I just can't see where it is getting the object[] from? Is the composite key supposed to be object[]?

  Read the article

< Previous Page | 327 328 329 330 331 332 333 334 335 336 337 338  | Next Page >