Search Results

Search found 29554 results on 1183 pages for 'human computer interface'.

Page 331/1183 | < Previous Page | 327 328 329 330 331 332 333 334 335 336 337 338  | Next Page >

• Linux server failover

  - by Lukasz

  I have two Linux servers (CentOS6) - both are identically configured connected to the same switch with a direct link between them. I only have one external IP that is assigned to eth0 on both servers (connected to the internet switch) with the interface shutdown on server 2. How can I failover to server 2 if server 1 dies - as stated they are linked directly so they can check for availability of each other via ping/tcp/udp. I toyed with Heartbeat but the documentation seems to be non-existent - not sure how to bring up an interface and start some services if the other server dies.

  Read the article

• HDD dead forever???

  - by Roberto

  Yesterday I turned on my computer and it couldn't boot. I found out the hd (320GB SATA Seagate Momentus 7200.3 for notebook) was broken, it couldn't be recognized by the BIOS. I have another of the same hd, so I exchanged the boards. I found out that there is a problem on its board since my good hd didn't work. But the broken hd doesn't work with the good board as well: it can be recognized but when I insert a Windows Instalation DVD it says the hd is 0GB. I put it in a case and use it in another computer via USB, and but it doesn't show up in the "My Computer". I used a software to recover files called "GetDataBack for NTFS", it recognized the hd but with the wrong size (2TB). I try to make it read the hd but it get an I/O error reading sector. It tries to read, the hd spins... So, since I'm using a good board on it, the problem seems to be internal. Is there anything someone could do recover the files from it?

  Read the article

• Find out what fonts are being sent to a printer

  - by user38307

  I have an issue where two computers running XP and with identical print drivers have different behavior printing over parallel port to receipt printers. For one type of receipt, receipt printing is instant. For another kind printing is delayed by ten seconds on most machines but not on the other. This happens even if I swap out printers. I believe the delay is because this computer has a different set of fonts installed. (It is used for graphic design.) The printers have built-in fonts, and if you do not use one of the built-in fonts the printer has to build up an image in memory rather than just spitting out its fonts. For a particular kind of receipt with special fonts on a particular computer the computer is sending a font which the receipt printer does not have built in. My question is, is there a way to find out what fonts are being sent to the printer? This would let me narrow down what I need to modify in the Windows font folder. Thank you!

  Read the article

• Samsung 830 SSD

  - by anru

  I have a 128G SSD(830) of samsung installed on my win7 ultimate 64 bits machine. I have tried to copy a folder from my C drive to the SSD drive. And I have found out that copy speed is so slow, please look at picture below: I am just want to know, if this is because of I was tried to copy so many small files By the way. the SSD is Sata 3, but my mobo only has SATA 2 interface, I do not know if connect SATA 3 device to SATA 2 interface contributes to slow copy speed.

  Read the article

• Windows - Decrypt encrypted file when user account is destroyed

  - by dc2

  I have a Virtual Machine running on my Windows Server 2008 computer that originally was received by me encryped, as the builder of the VM did it on a MAC, which decrypts files by default. I never thought to decrypt these files, as they automatically 'decrypt' when you have permission over them, so the VM has been running for over a year despite the encryption. I just upgraded my computer to Domain Controller (dcpromo.exe). Now when I try to access/run the VM, I can't because I don't have permission to decrypt the files as that was on another logon (local administrator) and now I am the domain administrator. Apparently the local admin is totally nuked when you upgrade to domain controller. I have tried EVERYTHING - taking ownership of the files, which works. Doesn't do anything for me. Adding full control to everyone on the files. I go to File Properties Advanced Details (under encryption) Users who can access this file. The only user is administrator@localcomputername, and there is a cert number. I try adding a new cert, I don't have permission. I don't have permission to: Decrypt the file (access is denied). Copy the file (to another computer) - access denied. I am totally stumped and this VM is a production machine and needs to get up right now. Does anyone have any ideas?

  Read the article

• How to remove Unicode characters and/or convert OpenOffice spreadsheet cells to plaintext?

  - by gonzobrains

  I have an OpenOffice spreadsheet into which I occasionally copy/paste snippets from web pages. However, I need the file, as a whole, to be free of fancy formatting and non-ASCII text. Is tried highlighting cells and selecting "Default Formatting" but this still seems to keep extraneous characters even though it looks like normal text to the human eye. If this is not possible, is there a way to at least reveal the "raw" data within a cell so that I can manually strip it? Thanks, Jeff

  Read the article

• Configure server on network to analyze traffic

  - by Strajan Sebastian

  I have the following network: http://i.stack.imgur.com/rapkH.jpg I want to send all the traffic from the devices that connect to the 192.168.0.1 router to the 192.168.10.1 router(and eventually to the Internet), by passing through the server and an additional router. Almost 2 days have passed and I can't figure what is wrong. While searching on the Internet for some similar configuration I found some articles that are somehow related to my needs, but the proposed solutions don't seem to work for me. This is a similar article: iptables forwarding between two interface I done the following steps for the configuration process: Set static IP address 192.168.1.90 for the eth0 on the server from the 192.168.1.1 router Set static IP address 192.168.0.90 for the eth1 on the server from the 192.168.0.1 router Forwarded all the traffic from 192.168.0.1 router to the server on eth1 interface witch seems to be working. The router firmware has some option to redirect all the traffic from all the ports to a specified address. Added the following rules on the server(Only the following, there aren't any additional rules): iptables -t nat -A POSTROUTING -o eth1 -j MASQUERADE iptables -A FORWARD -i eth1 -o eth0 -m state -–state RELATED,ESTABLISHED -j ACCEPT iptables -A FORWARD -i eth0 -o eth1 -j ACCEPT I also tried changing iptables -A FORWARD -i eth1 -o eth0 -m state -–state RELATED,ESTABLISHED -j ACCEPT into iptables -A FORWARD -i eth1 -o eth0 -j ACCEPT but still is not working. After adding the following to enable the packet forwarding for the server that is running CentOS: echo 1 /proc/sys/net/ipv4/ip_forward sysctl -w net.ipv4.ip_forward = 1 After a server restart and extra an extra check to see that all the configuration from above are still available I tried to see again if I can ping from a computer connected to 192.168.0.1/24 LAN the router from 192.168.1.1 but it didn't worked. The server has tshark(console wireshark) installed and I found that while sending a ping from a computer connected to 192.168.0.1 router to 192.168.1.1 the 192.168.0.90(eth1) receives the ping but it doesn't forward it to the eth0 interface as the rule tells: iptables -A FORWARD -i eth1 -o eth0 -j ACCEPT and don't now why this is happening. Questions: The iptables seem that don't work as I am expecting. Is there a need to add in the NAT table from iptables rules to redirect the traffic to the proper location, or is something else wrong with what I've done? I want to use tshark to view the traffic on the server because I think that is the best at doing this. Do you know something better that tshark to capture the traffic and maybe analyze it?

  Read the article

• Windows 8 not shutting down properly

  - by Patrick

  Since installing Windows 8, the computer hasn't been shutting down properly. When selecting to power down, the PC quickly displays the shutting down screen, the monitor powers off, and the computer remains on but unresponsive. After about 5 minutes, the computer will turn off. Upon booting into windows again, I am informed that Windows didn't properly shut down. I'm running a fast SSD, and it's a clean install of Windows 8, so there's no way Windows is taking that time to do some sort of hibernate on shutdown or whatever - not to mention the error when entering Windows the next time. This happens on every shut down. Restart works as expected. EDIT: Formatting again didn't work. Fails regardless of drivers installed. Event viewer Always these two messages in close succession: Error (event ID 6008): The previous system shutdown at 7:45:21 PM on ?27/?10/?2012 was unexpected. Critical (kernel power, event ID 41): The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.

  Read the article

• Cisco WLAN Controller not pushing out DHCP addresses, what else could it be?

  - by Name

  On our Cisco WLAN Controller web interfaces, in Controller Interfaces, I have made a new interface with these settings: VLAN Identifier 202 IP Address 172.16.202.1 Netmask 255.255.255.0 Gateway 172.16.202.254 Primary DHCP Server 172.16.100.3 Secondary DHCP Server 172.16.100.2 Port: LAG I've also made a new WLAN and assigned it to the above interface. I have saved changes. But our wireless devices, although they seem to authenticate with the WLAN fine, they always get stuck on "obtaining DHCP address", so it seems the WLAN Controller isn't pushing out DHCP addresses to our devices. We do have a DHCP scope for the above in Windows Server 2008 R2 and everything there seems fine. If I connect a device with a static address (e.g. 172.16.202.10), it will connect. Stuck on what to do :(

  Read the article

• /etc/hosts file for a multi-homed, multi-domain machine?

  - by threecheeseopera

  I have a server (debian) with two network interfaces that I would like to host multiple services and domains on; it is not entirely clear to me how the hosts file should be set up. Example: eth0, bound to WAN interface 1.2.3.4: mail.example.com www.example.com eth0:1, bound to WAN interface 1.2.3.5: www.other-domain.com eth1, bound to LAN 192.168.1.123: some-clever-hostname What should my hosts file look like? (including localhost,localhost.localdomain, etc.) Should I use DNS for some of these entries? Which ones? Thanks!

  Read the article

• Win7 loses connection to network shares after resume unless server specified using FQDN

  - by Szonja Zemkó

  My Win7 client has a connection to a Linux server and its shared folders. The problem occurs when the computer wakes up after a sleep and then one of the shared folders is not accessible. I receive the following message: Error code: 80070035, The network path was not found. I have problem with one specific folder only. When I restart the computer this problematic folder is accessible again. When I log off before sleep the folder is accessible after wakeup. If I try to access the folder by using the FQDN of the server or the server IP it is also accessible. As a temporary solution I mapped the folder to a network drive using the FQDN and it's working fine but it's inconvenient since every other folder is accessible on the server. To summarize: \server\problematicshare no longer works after resume (the Samba server sees my client connect, then disconnects a few seconds later while I receive the above error message) \server\othershare works after resume \fqdn.of.server\problematicshare always works \ip.of.server\problematicshare always works once the problem manifests, I'm no longer able to restart the "Workstation" service (it is not responding) restarting the "Computer Browser" service has no apparent effect the event log doesn't contain anything that seems relevant "ping server" works

  Read the article

• Squid 2.7.6 not honoring ACL rules

  - by peppery

  Hello there, I have a /24 block of IP addresses assigned to a single server that I have been attempting to install Squid on an Ubuntu server machine. All of the IP addresses are set up correctly (aliases of eth0) in /etc/networking and work as they should be, using cURL I can specify an interface and it goes out on the correct address as it should be. I would like Squid to take the incoming IP address the request was sourced to and proxy the request out on the same IP (e.g incoming 123.123.123.1:3128 - 123.123.123.1, .2 - .2, etc) and have set up these ACL rules in /etc/squid.conf acl ip1 myip x.x.x.1 tcp_outgoing_address x.x.x.1 ip1 acl ip2 myip x.x.x.2 tcp_outgoing_address x.x.x.2 ip2 acl ip3 myip x.x.x.3 tcp_outgoing_address x.x.x.3 ip3 and so on, as this seems to be the only way to do what I want (from research). However, after much frustration, Squid seems to be ignoring these rules and sending requests out on the default interface. Does anybody have any suggestions? Thanks.

  Read the article

• Citrix XenApp application does not have keyboard focus when launched

  - by Jason Pearce

  On new or existing Citrix XenApp 4.5 servers, I am having problems streaming the Allscripts Pro EHR application via the XenApp web interface. When users launch the application via the Citrix XenApp web interface, the application does not have focus, preventing users from typing in their username and password. If they use their mouse to select either the username or password fields, they still cannot enter any text. However, if they do any of the following actions, they can then enter in their username and password and the application runs without problems: Click on the Login button with empty fields. Logon fails but they can then enter their credentials. Minimize the login window and then maximize it. They can then gain keyboard focus to enter their credentials. What might be preventing this particular application from having focus when it launches?

  Read the article

• How I can make my windows look like mac using any software or utilities?

  - by user33631

  I am currently using Windows classic mode in Win server 2008 r2. Can I get mac like themes in windows. Like When I run Photoshop, SongBird or other apps they have interface quite similar with Mac. Does someone know how it's possible to get a mac like look in windows (compatible to win 7). My simply means that something that make my windows's themes color like mac. Like I can run firefox by using themes but i want now for every apps means the three button on top titlebar and interface.

  Read the article

• How to diagnose a spontaneous reboot?

  - by Spectralist

  My computer reboots, seemingly completely at random, about once every week to two weeks but has occasionally gone months. It just goes from running fine to the POST with no error messages or anything and doesn't seem to be due to heat or usage as it's happened a couple of times when the computer has booted just a few moments ago and is idling. It's been happening for as long as I've had this computer, almost two years. It's happened in both Vista and Windows7. I strongly suspect it's a hardware problem. But due to the rareish and random nature of the crashes my normal strategy of just removing hardware until the problem stops isn't really practical. My guess would be Power Supply, Ram, or Motherboard. But I just don't know how to test an issue this random and want to figure out how to confirm which it is before I go replacing things. So is there some software or hardware that can be used to test these sorts of errors? I did run memtest86 for about 8 hours without finding any issues. And the power supply is more than capable of running my system.

  Read the article

• UVC device Logitech WebCam 9000 pro

  - by Pavel

  There is such a good webcam in universe that acts as a "USB Video Class" (UVC - video USB standart interface) - the logitech webcam 9000. UVC offer unified interface allowing to control it or grab a picture from it by any UVC-driver. You need one universal driver and you support all the UVC devices (webcams, video-cameras, video-grabbing-cards etc). For example, in linux - if you have UVC driver - you don't need to think about specific webcam driver for UVC webcam. UVC has unified way that webcam transmit its awailable resolutions and other capabilities, so i see 1600x1200 resolution without any problem. I wonder if windows 7 has UVC. I mean "universal UVC" (-; It says "USB Video Class", but doesn't give resolutions larger than 640x480 and webcam's controls, like 'sharpness', 'focus' and other as linux's driver does...

  Read the article

• Can't access apache from outsite my local network

  - by valter

  UPDATED: Now, when I type my external ip like xxx.xxx.xxx.xxx:8079, i can access xampp defaults page. But the strange is that when someone else from outside my network, try to access it using the same ip, it doesnt work. I Think it should, because its the external ip. I'm getting crazy. I have tried for hours to access xampp defaults page from outside my local network. My ISP blocks port 80 and 8080. So I changed apache to listen to port 8079 Listen 8079 My local computer ip is 10.1.1.2 I can access the webserver, from any computer on my local network when I type http://10.1.1.2:8079 I also oppended the port 8079 on my modem, as the image shows bellow. (I think i did it right) When apache is running on my computer, if I test the port 8079 at http://canyouseeme.org/ i get the message "Success: I can see your service on xxx.xxx.xxx.xxx on port (8079) Your ISP is not blocking port 8079" If apache is not running I get "Error: I could not see your service on xxx.xxx.xxx.xxx on port (8079) Reason: Connection refused". So, it's clear that the port 8079 is oppened. But when I type xxx.xxx.xxx.xxx:8079 on google chrome for example, I get Oops! Google Chrome could not connect to xxx.xxx.xxx.xxx:8079 What can I do to solve this, to allow apache to server the pages? I don't know what else I shoud configure. Please, help me. Thanks.

  Read the article

• Anonymizing OpenVPN Allow SSH Access to Internal Server

  - by Lionel

  I'm using an anonymizing VPN, but want SSH access to internal computer. How do I access my internal computer through SSH? When I do ssh 98.123.45.6, the connection times out. IP address from cable provider: 98.123.45.6 Anonymous IP through VPN: 50.1.2.3 Internal computer: 192.168.1.123 When searching around, I found recommendations to either set up iptables rules, routing rules, or to add ListenAddress to sshd_config. Which of these applies to my case? Here is my route: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.115.81.1 10.115.81.9 255.255.255.255 UGH 0 0 0 tun0 10.115.81.9 * 255.255.255.255 UH 0 0 0 tun0 50.1.2.3-sta ddwrt 255.255.255.255 UGH 0 0 0 eth0 192.168.1.0 * 255.255.255.0 U 202 0 0 eth0 169.254.0.0 * 255.255.0.0 U 204 0 0 vboxnet0 loopback * 255.0.0.0 U 0 0 0 lo default 10.115.81.9 128.0.0.0 UG 0 0 0 tun0 128.0.0.0 10.115.81.9 128.0.0.0 UG 0 0 0 tun0 default ddwrt 0.0.0.0 UG 202 0 0 eth0

  Read the article

• Windows 8 Killed my SSDs

  - by SLaks

  I have a computer running 2 256GB Crucial M4's (CT256M4SSD2) in a RAID 0 (striped) array on an ASUS P9X79 Pro using Intel's (built-in) RAID system. I recently installed Windows 8 Pro as UEFI on this RAID array. (wiping a fully-function Windows 7 non-UEFI installation) Now, whenever the computer is left running for about an hour, the system no longer sees those drives. Since those drives contain Windows, this leads to various forms of BSODs. If I Intel RSTe (RAID manager) is running at the time, it will say that the disk backing that RAID array has been removed. Once this happens, if I reset the computer, it will no longer boot. Entering BIOS setup shows that the SATA 3 (6Gbps) ports that those disks are connected to are both empty. If I then power down the system completely, then turn it on again, the drives reappear, but the problem repeats after another hour or so. I have inconclusively determined that the problem occurs even if Windows is not running (booted into the installation environment from a UEFI flash drive) I don't think there has been any data corruption since this started happening, although I have had two strange issues with a GIT repo on that disk. sfc /ScanNow and Intel's disk check (in RSTe) both do not find anything. Does anyone know what might cause this?

  Read the article

• Monitor programs accessing my keyboard?

  - by Anti Earth

  As of a few days ago, my computer is behaving 'erratically'. When I am typing, my pointer will randomly move to another place in the text and start typing a semi-random string of characters. ("gvyfn" is common; It has typed this about 8 times whilst I composed all the text above) It often highlights part of or all the text and overwrites it. It sometimes goes into loops of pressing Control-alt-delete down, bringing up Windows 7 menu thing. It sometimes even messes with mouseclicks; they have unexpected results, like requesting admin priveledges from applications, instead of switching to their window. I believe this is because it is holding a alt-function key down. This behaviour happens periodically, in waves. It might subside for an hour, then continue to haunt me. I believe it to be a virus or malicious program. My anti-virus (Symantec) and multiply MS rootkit removers could not find anything suspicious. I've noticed that sometimes it re-maps keys, and types gibberish when I press certain keys (though no pattern is evident). I believe a malicious program has installed a keyhook on my computer. I'm wondering... - Is there a way to let me view which programs are emulating keystrokes? - Is there a way to view what keyboard hooks are installed? (I'm also at liberty to try any other techniques to remove this blasted thing. It is easily the most fustrating computer problem I've encountered). Thanks!

  Read the article

• Two Way Sync of folder on PC to USB Thumb Drive over the internet.

  - by Tim Santeford

  Before flagging as duplicate please note that other similar posts do not have the same criteria below. Thanks Im looking for an app that will let me automatically sync a usb drive with a folder on my home system over the internet. I would like to roam from computer to computer and run this syncing app from the usb drive. Im looking for the same functionally as DropBox but without the 2gb restriction and without the need to fully install. Two Way sync between a usb drive and pc over the net Utilizes the full size of the usb drive not limited by an online storage size. (I dont need online backup or versioning) Allows the removal of the usb drive, Plugging it in to another computer will resume its sync. While the drive is connected the app should run silently keeping changed files in sync. (I dont want to run a manual process other than simply starting the app) Must be able to run as a portable app from the usb drive but can fully install on home pc. Window 7 Support is preferable. Please let me know if such and awesome app exists. TIA!

  Read the article

• I can get in, but I can't get out

  - by robwilkerson

  Like most technical folks, I suppose, I'm my family's primary source of tech support. I'm a developer--not a sysadmin--by trade and tonight I bumped into something I've never seen before. I'm hoping someone here has. In order to better help my Mom, I have her set up on a home network behind a Linksys router (WRT54G). She's got a Mac, so I have her router set up to forward SSH requests to her laptop's internal IP. I also have her router running DDNS through DynDns. Tonight she called to tell me that she can't access the Internet. Assuming it was one of the many simple, stupid problems most of us encounter with parents, I logged into the router admin remotely and took a look around. Everything looked normal. Then I SSH'd into her machine to check out her IP, DNS, etc. settings. Everything still looked fine. Then I noticed something weird. When SSH'd into her machine, I can't ping her router. In other words, I seem to be able to access her computer through her router, but not access her router from her computer. A traceroute dies immediately as well. Any ideas what I might try next? I've bounced her computer and even unplugged her router (it was plugged back in, of course). Thanks.

  Read the article

• I can get in, but I can't get out

  - by robwilkerson

  Like most technical folks, I suppose, I'm my family's primary source of tech support. I'm a developer--not a sysadmin--by trade and tonight I bumped into something I've never seen before. I'm hoping someone here has. In order to better help my Mom, I have her set up on a home network behind a Linksys router (WRT54G). She's got a Mac, so I have her router set up to forward SSH requests to her laptop's internal IP. I also have her router running DDNS through DynDns. Tonight she called to tell me that she can't access the Internet. Assuming it was one of the many simple, stupid problems most of us encounter with parents, I logged into the router admin remotely and took a look around. Everything looked normal. Then I SSH'd into her machine to check out her IP, DNS, etc. settings. Everything still looked fine. Then I noticed something weird. When SSH'd into her machine, I can't ping her router. In other words, I seem to be able to access her computer through her router, but not access her router from her computer. A traceroute dies immediately as well. Any ideas what I might try next? I've bounced her computer and even unplugged her router (it was plugged back in, of course). Thanks.

  Read the article

• Debian virtual server hangs on reboot, need help debugging

  - by BubuIIC

  I'm admin of a Debian 6 virtual server. I've been trying to diagnose this problem for a while but haven't gotten anything. The server hangs every time I want to reboot it. All services seem to be shutting down, I lose ssh connection. Then nothing. I have to restart it through the hoster's web-interface, which just gives me the options "Normal Boot" and "Rescue System". Normal boot then brings the server back to life. Possibly (probably?) related, the server does not boot into a newer kernel version, it's running 2.6.18 right now, but installed is actually 2.6.32. I don't know whether it hangs on shutdown or on startup, but booting through the web-interface works (except the kernel part). Am I missing something obvious? Where should I start looking? I have no idea how to diagnose the problem.

  Read the article

• Windows user moving to Ubuntu 12.04. Where are the system tools, or equivalents?

  - by Big Endian

  I am a Windows user who has begun experimenting with Ubuntu. Ubuntu seems great, but for all the things it seems like I CAN'T do. How do I get to advanced administration stuff, like the list of drivers, all of the installed software, and something equivalent to Windows' Device Manager. I always heard that Linux was supposed to be very raw, and you had to have lots of computer experience to make it work. This seems just the opposite. Ubuntu seems very modern and user friendly, better in some regards than any operating system I have seen. Unfortunately, I can't find any of the guts of this system beneath all of the user friendly frosting... gunk... crap... stuff. I'm reminded more and more of an Apple computer (except Linux is more affordable :). So how do I peel back this layer and start using the computer? A solution other than installing Gnome 3 would be appreciated.

  Read the article

< Previous Page | 327 328 329 330 331 332 333 334 335 336 337 338  | Next Page >