Search Results

Search found 15499 results on 620 pages for 'non obvious'.

Page 331/620 | < Previous Page | 327 328 329 330 331 332 333 334 335 336 337 338  | Next Page >

  • Dell XPS + Apple Mini-Display Adaptor + Projector = KABOOM

    - by D'Arcy Lussier
    Remember how I blogged about rolling with the punches? So today my buddy and Prairie Dev Con speaker James Chambers went to present on Microsoft MVC. He brought his fancy new Dell XPS laptop, which he had used to do presentations and stream internet video to a projector before. But today, the technology gods were not smiling… James tries to connect his laptop to the projector. Nothing. The projector just can’t recognize the connection. Realize that we’ve already had two sessions in that room already, so everything *should* work. The Dell XPS laptop James has doesn’t have a VGA port. Instead, it has HDMI and Mini-Display ports. James had one of the Apple mini-display to VGA adapters. If I connected my Mac Book Pro, I could connect no problem, so it wasn’t the adapter. He could connect his laptop to projectors before, so it wasn’t the laptop. And we’d already had sessions, so it wasn’t the projector. So what was it? Well, all three it turns out. Thanks to this post over at Irongeek.com we discovered that using Windows 7 on a Dell XPS with the Apple connector and a non-plug-in-play projector won’t work. So the fix was ditch the Apple connector, use the Star Tech model instead (listed in the Irongeek article). So James is good to go, he’s going to talk at the last session and we’ve moved the Windows 8 talk Jim Russell and I were going to do until tomorrow. Roll with the punches…

    Read the article

  • NEC uPD720200 USB 3.0 not working on Ubuntu 12.04

    - by Jagged
    I've recently installed Ubuntu 12.04 64-bit on a HP Envy 15 1104tx. Most stuff appears to be working fine with the exception of the two USB3 ports (USB2 port works fine). I've read a lot of articles but so far have not been able to find a solution. I've tried adding 'pci=nomsi' to '/etc/default/grub' but this made no difference. Some articles suggest booting into Windows and upgrading the firmware on the uPD720200. Any body had any experience of this? Is there a way I can checked the firmware version of the NEC uPD720200 in Linux to see if there is an update available? Any help appreciated. uname -a: Linux HP-ENVY-15-1104tx 3.2.0-26-generic #41-Ubuntu SMP Thu Jun 14 17:49:24 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux lshw: hp-envy-15-1104tx description: Notebook product: HP ENVY 15 Notebook PC (WF591PA#ABG) vendor: Hewlett-Packard version: 0492110000241910001420000 serial: CNF0301C79 width: 64 bits capabilities: smbios-2.6 dmi-2.6 vsyscall32 configuration: boot=normal chassis=notebook family=103C_5335KV sku=WF591PA#ABG uuid=434E4630-3330-3143-3739-60EB6906688F *-core description: Motherboard product: 1522 vendor: Hewlett-Packard physical id: 0 version: 36.35 serial: CNF0301C79 slot: Base Board Chassis Location *-firmware description: BIOS vendor: Hewlett-Packard physical id: 0 version: F.2B date: 10/12/2010 size: 1MiB capacity: 1472KiB capabilities: pci upgrade shadowing cdboot bootselect edd int13floppynec int13floppytoshiba int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int9keyboard int10video acpi usb biosbootspecification *-memory description: System Memory physical id: 13 slot: System board or motherboard size: 16GiB *-bank:0 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: 9905428-043.A00LF physical id: 0 serial: E13C4316 slot: Bottom size: 4GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:1 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: 9905428-043.A00LF physical id: 1 serial: E03C3E16 slot: Bottom size: 4GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:2 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: 9905428-043.A00LF physical id: 2 serial: 672279CC slot: On Board size: 4GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:3 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: 9905428-043.A00LF physical id: 3 serial: 652286CC slot: On Board size: 4GiB width: 64 bits clock: 1333MHz (0.8ns) *-cpu description: CPU product: Intel(R) Core(TM) i7 CPU Q 820 @ 1.73GHz vendor: Intel Corp. physical id: 1d bus info: cpu@0 version: Intel(R) Core(TM) i7 CPU Q 820 @ 1.73GHz slot: CPU size: 1199MHz capacity: 1199MHz width: 64 bits clock: 1066MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 popcnt lahf_lm ida tpr_shadow vnmi flexpriority ept vpid cpufreq configuration: cores=4 enabledcores=4 threads=8 *-cache:0 description: L3 cache physical id: 1e slot: L3 Cache size: 8MiB capacity: 8MiB capabilities: synchronous internal write-through unified *-cache:1 description: L2 cache physical id: 20 slot: L2 Cache size: 256KiB capacity: 256KiB capabilities: synchronous internal write-through unified *-cache:2 description: L1 cache physical id: 21 slot: L1 Cache size: 32KiB capacity: 32KiB capabilities: synchronous internal write-through instruction *-cache description: L1 cache physical id: 1f slot: L1 Cache size: 32KiB capacity: 32KiB capabilities: synchronous internal write-through data *-pci:0 description: Host bridge product: Core Processor DMI vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 11 width: 32 bits clock: 33MHz *-pci:0 description: PCI bridge product: Core Processor PCI Express Root Port 1 vendor: Intel Corporation physical id: 3 bus info: pci@0000:00:03.0 version: 11 width: 32 bits clock: 33MHz capabilities: pci msi pciexpress pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:16 ioport:4000(size=4096) memory:d4100000-d41fffff ioport:c0000000(size=268435456) *-display description: VGA compatible controller product: Broadway PRO [Mobility Radeon HD 5800 Series] vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi vga_controller bus_master cap_list rom configuration: driver=fglrx_pci latency=0 resources: irq:58 memory:c0000000-cfffffff memory:d4100000-d411ffff ioport:4000(size=256) memory:d4140000-d415ffff *-multimedia description: Audio device product: Juniper HDMI Audio [Radeon HD 5700 Series] vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0.1 bus info: pci@0000:01:00.1 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:56 memory:d4120000-d4123fff *-pci:1 description: PCI bridge product: Core Processor PCI Express Root Port 3 vendor: Intel Corporation physical id: 5 bus info: pci@0000:00:05.0 version: 11 width: 32 bits clock: 33MHz capabilities: pci msi pciexpress pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:16 memory:d4000000-d40fffff *-usb description: USB controller product: uPD720200 USB 3.0 Host Controller vendor: NEC Corporation physical id: 0 bus info: pci@0000:02:00.0 version: 03 width: 64 bits clock: 33MHz capabilities: pm msi msix pciexpress xhci bus_master cap_list configuration: driver=xhci_hcd latency=0 resources: irq:16 memory:d4000000-d4001fff *-generic:0 UNCLAIMED description: System peripheral product: Core Processor System Management Registers vendor: Intel Corporation physical id: 8 bus info: pci@0000:00:08.0 version: 11 width: 32 bits clock: 33MHz capabilities: pciexpress cap_list configuration: latency=0 *-generic:1 UNCLAIMED description: System peripheral product: Core Processor Semaphore and Scratchpad Registers vendor: Intel Corporation physical id: 8.1 bus info: pci@0000:00:08.1 version: 11 width: 32 bits clock: 33MHz capabilities: pciexpress cap_list configuration: latency=0 *-generic:2 UNCLAIMED description: System peripheral product: Core Processor System Control and Status Registers vendor: Intel Corporation physical id: 8.2 bus info: pci@0000:00:08.2 version: 11 width: 32 bits clock: 33MHz capabilities: pciexpress cap_list configuration: latency=0 *-generic:3 UNCLAIMED description: System peripheral product: Core Processor Miscellaneous Registers vendor: Intel Corporation physical id: 8.3 bus info: pci@0000:00:08.3 version: 11 width: 32 bits clock: 33MHz configuration: latency=0 *-generic:4 UNCLAIMED description: System peripheral product: Core Processor QPI Link vendor: Intel Corporation physical id: 10 bus info: pci@0000:00:10.0 version: 11 width: 32 bits clock: 33MHz configuration: latency=0 *-generic:5 UNCLAIMED description: System peripheral product: Core Processor QPI Routing and Protocol Registers vendor: Intel Corporation physical id: 10.1 bus info: pci@0000:00:10.1 version: 11 width: 32 bits clock: 33MHz configuration: latency=0 *-multimedia description: Audio device product: 5 Series/3400 Series Chipset High Definition Audio vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 05 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:55 memory:d4200000-d4203fff *-pci:2 description: PCI bridge product: 5 Series/3400 Series Chipset PCI Express Root Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: 05 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:17 ioport:3000(size=4096) memory:d3000000-d3ffffff ioport:d0000000(size=16777216) *-network description: Wireless interface product: Centrino Advanced-N 6200 vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 35 serial: 00:27:10:40:e4:68 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-26-generic firmware=9.221.4.1 build 25532 latency=0 link=no multicast=yes wireless=IEEE 802.11abgn resources: irq:54 memory:d3000000-d3001fff *-pci:3 description: PCI bridge product: 5 Series/3400 Series Chipset PCI Express Root Port 2 vendor: Intel Corporation physical id: 1c.1 bus info: pci@0000:00:1c.1 version: 05 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:16 ioport:2000(size=4096) memory:d2000000-d2ffffff ioport:d1000000(size=16777216) *-network description: Ethernet interface product: AR8131 Gigabit Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:04:00.0 logical name: eth0 version: c0 serial: 60:eb:69:06:68:8f size: 1Gbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI duplex=full firmware=N/A ip=10.161.0.147 latency=0 link=yes multicast=yes port=twisted pair speed=1Gbit/s resources: irq:57 memory:d2000000-d203ffff ioport:2000(size=128) *-usb description: USB controller product: 5 Series/3400 Series Chipset USB2 Enhanced Host Controller vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 05 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:20 memory:d4205800-d4205bff *-pci:4 description: PCI bridge product: 82801 Mobile PCI Bridge vendor: Intel Corporation physical id: 1e bus info: pci@0000:00:1e.0 version: a5 width: 32 bits clock: 33MHz capabilities: pci subtractive_decode bus_master cap_list *-isa description: ISA bridge product: Mobile 5 Series Chipset LPC Interface Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 05 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: latency=0 *-storage description: RAID bus controller product: 82801 Mobile SATA Controller [RAID mode] vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 logical name: scsi0 version: 05 width: 32 bits clock: 66MHz capabilities: storage msi pm bus_master cap_list emulated configuration: driver=ahci latency=0 resources: irq:45 ioport:5048(size=8) ioport:5054(size=4) ioport:5040(size=8) ioport:5050(size=4) ioport:5020(size=32) memory:d4205000-d42057ff *-disk description: ATA Disk product: OCZ-VERTEX3 physical id: 0.0.0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 2.15 serial: OCZ-0350P6H316X5KUQE size: 223GiB (240GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=000592dd *-volume:0 description: EXT4 volume vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 logical name: / version: 1.0 serial: e741f18c-cfc5-4bce-b1e7-f80e517a3a22 size: 207GiB capacity: 207GiB capabilities: primary bootable journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2012-06-15 06:49:27 filesystem=ext4 lastmountpoint=/ modified=2012-06-14 21:23:42 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,user_xattr,barrier=1,data=ordered mounted=2012-07-10 16:18:20 state=mounted *-volume:1 description: Extended partition physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 size: 15GiB capacity: 15GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume description: Linux swap / Solaris partition physical id: 5 logical name: /dev/sda5 capacity: 15GiB capabilities: nofs *-serial UNCLAIMED description: SMBus product: 5 Series/3400 Series Chipset SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 05 width: 64 bits clock: 33MHz configuration: latency=0 resources: memory:d4205c00-d4205cff ioport:5000(size=32) *-pci:1 description: Host bridge product: Core Processor QuickPath Architecture Generic Non-Core Registers vendor: Intel Corporation physical id: 101 bus info: pci@0000:ff:00.0 version: 04 width: 32 bits clock: 33MHz *-pci:2 description: Host bridge product: Core Processor QuickPath Architecture System Address Decoder vendor: Intel Corporation physical id: 102 bus info: pci@0000:ff:00.1 version: 04 width: 32 bits clock: 33MHz *-pci:3 description: Host bridge product: Core Processor QPI Link 0 vendor: Intel Corporation physical id: 103 bus info: pci@0000:ff:02.0 version: 04 width: 32 bits clock: 33MHz *-pci:4 description: Host bridge product: Core Processor QPI Physical 0 vendor: Intel Corporation physical id: 104 bus info: pci@0000:ff:02.1 version: 04 width: 32 bits clock: 33MHz *-pci:5 description: Host bridge product: Core Processor Integrated Memory Controller vendor: Intel Corporation physical id: 105 bus info: pci@0000:ff:03.0 version: 04 width: 32 bits clock: 33MHz *-pci:6 description: Host bridge product: Core Processor Integrated Memory Controller Target Address Decoder vendor: Intel Corporation physical id: 106 bus info: pci@0000:ff:03.1 version: 04 width: 32 bits clock: 33MHz *-pci:7 description: Host bridge product: Core Processor Integrated Memory Controller Test Registers vendor: Intel Corporation physical id: 107 bus info: pci@0000:ff:03.4 version: 04 width: 32 bits clock: 33MHz *-pci:8 description: Host bridge product: Core Processor Integrated Memory Controller Channel 0 Control Registers vendor: Intel Corporation physical id: 108 bus info: pci@0000:ff:04.0 version: 04 width: 32 bits clock: 33MHz *-pci:9 description: Host bridge product: Core Processor Integrated Memory Controller Channel 0 Address Registers vendor: Intel Corporation physical id: 109 bus info: pci@0000:ff:04.1 version: 04 width: 32 bits clock: 33MHz *-pci:10 description: Host bridge product: Core Processor Integrated Memory Controller Channel 0 Rank Registers vendor: Intel Corporation physical id: 10a bus info: pci@0000:ff:04.2 version: 04 width: 32 bits clock: 33MHz *-pci:11 description: Host bridge product: Core Processor Integrated Memory Controller Channel 0 Thermal Control Registers vendor: Intel Corporation physical id: 10b bus info: pci@0000:ff:04.3 version: 04 width: 32 bits clock: 33MHz *-pci:12 description: Host bridge product: Core Processor Integrated Memory Controller Channel 1 Control Registers vendor: Intel Corporation physical id: 10c bus info: pci@0000:ff:05.0 version: 04 width: 32 bits clock: 33MHz *-pci:13 description: Host bridge product: Core Processor Integrated Memory Controller Channel 1 Address Registers vendor: Intel Corporation physical id: 10d bus info: pci@0000:ff:05.1 version: 04 width: 32 bits clock: 33MHz *-pci:14 description: Host bridge product: Core Processor Integrated Memory Controller Channel 1 Rank Registers vendor: Intel Corporation physical id: 10e bus info: pci@0000:ff:05.2 version: 04 width: 32 bits clock: 33MHz *-pci:15 description: Host bridge product: Core Processor Integrated Memory Controller Channel 1 Thermal Control Registers vendor: Intel Corporation physical id: 10f bus info: pci@0000:ff:05.3 version: 04 width: 32 bits clock: 33MHz *-battery description: Lithium Ion Battery product: NK06053 vendor: SMP-ATL24 physical id: 1 slot: Primary capacity: 4800mWh configuration: voltage=11.1V lspci: 02:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) (prog-if 30 [XHCI]) Subsystem: Hewlett-Packard Company Device 1522 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at d4000000 (64-bit, non-prefetchable) [size=8K] Capabilities: [50] Power Management version 3 Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [90] MSI-X: Enable+ Count=8 Masked- Capabilities: [a0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Device Serial Number ff-ff-ff-ff-ff-ff-ff-ff Capabilities: [150] Latency Tolerance Reporting Kernel driver in use: xhci_hcd lsusb (with thumb drive plugged into USB3 port): Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 5986:01d0 Acer, Inc Bus 001 Device 004: ID 03f0:231d Hewlett-Packard

    Read the article

  • CodePlex Daily Summary for Thursday, May 13, 2010

    CodePlex Daily Summary for Thursday, May 13, 2010New ProjectsC# 4.0: VS 2010Collaborative Rich Text Edit Prototype Silverlight on Windows Azure: Working like Google Doc but based on Silverlight/Windows Azure. Multiple users can edit one rich text document simultaneously. This is a POC and my...Consulting Assigment: Proyecto de consultoría para el curso Gestión de proyectos de la UCRCS 105 MP Splitter: Simple program to help with splitting up MPs for grading.DipEngine - graphic engine written on Xen for XNA: DIPEngine makes it easier for developers to use it in your game. It's developed in C# and using Xen for XNADotNetAgent: Agent FrameworkExtending C# editor - Outlining, classification: Extensions to VS C# editor current feautereset. Outlining for switch, for(each), if etc. statements. Classification types for method parameters and...Floe IRC Client: Floe is an IRC client written entirely in C#, using the .NET 4.0 framework with WPF technology. It is inspired largely by both XChat and mIRC, and ...Gestalt.Net: Gestalt.Net is a simple to use library for application configuration. It allows for more flexibility, easier to use, and more powerful than the app...GIM.OnlineChess: An implementation of online long-term chessGoogleTrail: Create and Export using the google map to develop the Trek Trails and Export Those Trails as Garmin Custom Map Compatible MapsGrassidi: What could Grassidi be?HodsAudio: Personal web based music library.Hospital Manage System: Free Hospital Manage SystemHtml Reader: Html Reader makes it easier for WPF WebBrowser users to access the Document property, and retrieve information from HTML pages. You'll no longer ha...Intellitouch.BackOffice: This project is a control for a menu.Jank: JankKooBoo Image Galery: It's a Module for kooboo that implements an image galery admin and view Developed for kooboo 2.1.1.0MoonyDesk (windows desktop widgets): Windows desktop plugin based widgets system written on WPFMSNSharp Application with Video Conferencing Feature: In MSN World, users don’t communicate directly each other.I examined P2P open source video/audio conference systems . After researching, I found Vi...mysample: study sample siteNoteFlyBot: An Intelligent Note Program is: - a 'Post-it' note that accept sNatural Language command to Upload content to EMC Repositories - Start Workflow...OpenGraphNET: A OpenGraphNET is a simple parser for the Open Graph protocol created by Facebook. More information on this can be found at opengraphprotocol.org.POCO - ADO.NET Entity Framework 4.0: The sample shows how to retrieve the data using POCO using EDM 4.0. Database used: Northwind (http://www.microsoft.com/downloads/details.aspx?Fa...sqlmx: sqlmxUpgrade Log Parser for SharePoint 2010: This is a simple Upgrade Log Parser for SharePoint 2010. It will add a node in the upgrade section of the central administration and deploy a pag...New ReleasesAMP (Adamo Media Player): AMP (Adamo Media Player): First Release version 0.1.0 Installation Instructions Unzip the package Run Setup.exe Follow Setup instructions File includes .NET Framework ...BeanProxy: BeanProxy 2.8: BeanProxy is a C# (.NET 3.5) library housing classes that facilitates unit testing. Any non-static, public interface/class/or abstract class can be...Begtostudy-Test: Test V1: Download to testCBM-Command: 2010-05-13: Release Notes - 2010-05-13New Features Configuration Manager is complete Changes Had to put CBM-Command on a big-time diet. Ran out of room on the...CS 105 MP Splitter: CS 105 MP Splitter: Uses SharpZipLib for unzipping (http://www.icsharpcode.net/OpenSource/SharpZipLib/) Uses ILMerge to merge it all into a single executable (http://w...DipEngine - graphic engine written on Xen for XNA: DipGUI: Provides simple controls for use itEvent Scavenger: Collector service update - version 3.2.3: Added additional functionality to check if host/machine is available on the network before trying to open Event log. Also added code to try to use ...ExcelExportLib: ExcelExportLib 1.4.0.0: Solution converted to Visual Studio 2010 - Added support for formulas in cells - Added support for cell naming - Added support for cell's comments...F# Project Extender: V0.9.1.0 (VS2008,VS2010): F# project extender for Visual Studio 2008 and Visual Studio 2010. What's new : Now supports both Visual Studio 2010 and Visual Studio 2008 Fixed...Floe IRC Client: Floe IRC Client 2010-05: Initial release. Note: The .NET Framework v4.0 is required to run this app. It can be downloaded here: http://www.microsoft.com/downloads/details....Fluent Assertions: Release 1.2.1: This is small release with two improvements: You can now use the Enumeration() extension method on a Func<IEnumerable> before calling ShouldThrow<T...Gestalt.Net: Gestalt.Net 1.0: Initial release of Gestalt.Net, a simple to use library for application configuration. It allows for more flexibility, easier to use, and more powe...GPdotNET - Tree Based Genetic Programming Tool: GPdotNETv0.9: This is the same version as previous, but compiled with Visual Studio 2010 and .NET 4.0. You no longer need CTP of ParallelFX.HKGolden Express: HKGoldenExpress (Build 201005122025): New features: (None) Bug fix: (None) Improvements: HKGolden Express now parse JSON data rather than XML document from HKGolden API. This shoul...Jobping Url Shortener: Deploy Code 0.3: Contains only the files for running 0.3 version of the code.Jobping Url Shortener: Source Code 0.3: Feature added: Restriction placed on the domains that the shortener will shorten. Our installation will only shorten www.jobping.com urls. Bug Fix...KooBoo Image Galery: Beta 1: This is the first release and it is divided in some parts Module Install - Is the admin module and an default view Plugin - returns the galery as...LinkedIn® for Windows Mobile: LinkedIn for Windows Mobile v0.8.5: Changes in release 0.8.5 Allow for multiple updatetypes. Add search by Company. Show profiles of all people in an update .MDownloader: MDownloader-0.15.13.58780: Fixed Uploading.com dead links detection; Fixed links detection at pages and in FilesTube results; Fixed RSS channel checking; Enabled by def...Microsoft - Domain Oriented N-Layered .NET 4.0 App Sample (Microsoft Spain): V0.8 - N-Layer DDD Sample App (VS.2010 RTM compat): Required Software (Microsoft Base Software needed for Development environment) Visual Studio 2010 RTM & .NET 4.0 RTM (Final Versions) Unity Applic...MoonyDesk (windows desktop widgets): MoonyDesk: MoonyDesk alpha releaseMSNSharp Application with Video Conferencing Feature: MSNVideoChat: Msn Video Chat Application's exe and screenshot is attached.NazTek.Extension.Clr35: NazTek.Extension.Clr35 Binary: FxCop compliant codebaseNazTek.Extension.Clr35: NazTek.Extension.Clr35 Signed Binary: Signed binaryNazTek.Extension.Clr35: NazTek.Extension.Clr35 Signed Source: Signed sourceNazTek.Extension.Clr35: NazTek.Extension.Clr35 Source: FxCop compliant codebasepatterns & practices Web Client Developer Guidance: Web Client Software Factory 2010 Guide: If the right-side pane of the chm file is not displayed correctly, do the following: 1) Download WCSF2010Guide.chm file. 2) Start the windows explo...Powershell Scripts for Admins: BizTalk PowerShell Module: BizTalk PowerShell Module Available commands : Get-Applications Start-Application Stop-Application Get-HostInstances Start-HostInstance Stop-Hos...Reusable Library: V1.0.8: A collection of reusable abstractions for enterprise application developerReusable Library Demo: V1.0.6: A demonstration of reusable abstractions for enterprise application developerRobot Shootans: Robot Shootans 0.9: This is the second public release of the game. All instructions for play are in the game itself. Known issues: Bullet collision is still a little...Rx Contrib: V1.2: - Bug fix - API changes public static ReactiveQueue<T> CreateConcurrentQueue( ConcurrentPublicationBehavior concurrentPublicationBeha...SqlDiffFramework-A Visual Differencing Engine for Dissimilar Data Sources: SqlDiffFramework 1.0.1.0: Maintenance Release An embedded user control inadvertently assumed US regional and language settings; with non-US settings the application crashed ...Transcriber: Transcriber V0.5.0: Pre-releaseUpgrade Log Parser for SharePoint 2010: Upgrade Log Parser for SharePoint 2010: Introduction I did an upgrade from MOSS 2007 to SharePoint 2010 and SP2010 generated such a large log file and I really didn't feel like scrolling ...VCC: Latest build, v2.1.30512.0: Automatic drop of latest buildVisual Leak Detector for Visual C++ 2008/2010: v2.0a: Renamed vld dll files. Problem with MSVC 2010 Unicode library fixed.VsTortoise - a TortoiseSVN add-in for Microsoft Visual Studio: VsTortoise Build 24 Beta: Build 24 (beta) New: Added "Open Modified File..." to Solution Explorer context menus. VsTortoise.SolutionExplorerSelectedItemsOpenModifiedFile com...WatchersNET.TagCloud: WatchersNET.TagCloud 01.05.00: Whats New Custom Tags: Tag Name and Tag Url can be localized New Option to set Start Date to grab Search Referrals from New Option to Choose th...Wavelet analysis: Wavelet analysis: Первая публичная версия проекта.XNA Shooter Engine: ModelViewer Alpha 1 Preview: ModelViewer is a utility for previewing HLSL shaders and XNA BasicEffects using the XSE rendering engine. It can also be used with the Microsoft XN...Yet another developer blog - Examples: XML and XSLT transformation in ASP.NET MVC example: This sample application shows how to perform XSL transformation of XML file in ASP.NET MVC (using dedicated HtmlHelper extensions or ActionResult)....Most Popular ProjectsWBFS ManagerRawrAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)patterns & practices – Enterprise LibraryMicrosoft SQL Server Community & SamplesPHPExcelASP.NETMost Active Projectspatterns & practices – Enterprise LibraryMirror Testing SystemRawrBlogEngine.NETPHPExcelwhitejQuery Library for SharePoint Web ServicesMicrosoft Biology FoundationFarseer Physics EngineShake - C# Make

    Read the article

  • T-SQL Tuesday #33: Trick Shots: Undocumented, Underdocumented, and Unknown Conspiracies!

    - by Most Valuable Yak (Rob Volk)
    Mike Fal (b | t) is hosting this month's T-SQL Tuesday on Trick Shots.  I love this choice because I've been preoccupied with sneaky/tricky/evil SQL Server stuff for a long time and have been presenting on it for the past year.  Mike's directives were "Show us a cool trick or process you developed…It doesn’t have to be useful", which most of my blogging definitely fits, and "Tell us what you learned from this trick…tell us how it gave you insight in to how SQL Server works", which is definitely a new concept.  I've done a lot of reading and watching on SQL Server Internals and even attended training, but sometimes I need to go explore on my own, using my own tools and techniques.  It's an itch I get every few months, and, well, it sure beats workin'. I've found some people to be intimidated by SQL Server's internals, and I'll admit there are A LOT of internals to keep track of, but there are tons of excellent resources that clearly document most of them, and show how knowing even the basics of internals can dramatically improve your database's performance.  It may seem like rocket science, or even brain surgery, but you don't have to be a genius to understand it. Although being an "evil genius" can help you learn some things they haven't told you about. ;) This blog post isn't a traditional "deep dive" into internals, it's more of an approach to find out how a program works.  It utilizes an extremely handy tool from an even more extremely handy suite of tools, Sysinternals.  I'm not the only one who finds Sysinternals useful for SQL Server: Argenis Fernandez (b | t), Microsoft employee and former T-SQL Tuesday host, has an excellent presentation on how to troubleshoot SQL Server using Sysinternals, and I highly recommend it.  Argenis didn't cover the Strings.exe utility, but I'll be using it to "hack" the SQL Server executable (DLL and EXE) files. Please note that I'm not promoting software piracy or applying these techniques to attack SQL Server via internal knowledge. This is strictly educational and doesn't reveal any proprietary Microsoft information.  And since Argenis works for Microsoft and demonstrated Sysinternals with SQL Server, I'll just let him take the blame for it. :P (The truth is I've used Strings.exe on SQL Server before I ever met Argenis.) Once you download and install Strings.exe you can run it from the command line.  For our purposes we'll want to run this in the Binn folder of your SQL Server instance (I'm referencing SQL Server 2012 RTM): cd "C:\Program Files\Microsoft SQL Server\MSSQL11\MSSQL\Binn" C:\Program Files\Microsoft SQL Server\MSSQL11\MSSQL\Binn> strings *sql*.dll > sqldll.txt C:\Program Files\Microsoft SQL Server\MSSQL11\MSSQL\Binn> strings *sql*.exe > sqlexe.txt   I've limited myself to DLLs and EXEs that have "sql" in their names.  There are quite a few more but I haven't examined them in any detail. (Homework assignment for you!) If you run this yourself you'll get 2 text files, one with all the extracted strings from every SQL DLL file, and the other with the SQL EXE strings.  You can open these in Notepad, but you're better off using Notepad++, EditPad, Emacs, Vim or another more powerful text editor, as these will be several megabytes in size. And when you do open it…you'll find…a TON of gibberish.  (If you think that's bad, just try opening the raw DLL or EXE file in Notepad.  And by the way, don't do this in production, or even on a running instance of SQL Server.)  Even if you don't clean up the file, you can still use your editor's search function to find a keyword like "SELECT" or some other item you expect to be there.  As dumb as this sounds, I sometimes spend my lunch break just scanning the raw text for anything interesting.  I'm boring like that. Sometimes though, having these files available can lead to some incredible learning experiences.  For me the most recent time was after reading Joe Sack's post on non-parallel plan reasons.  He mentions a new SQL Server 2012 execution plan element called NonParallelPlanReason, and demonstrates a query that generates "MaxDOPSetToOne".  Joe (formerly on the Microsoft SQL Server product team, so he knows this stuff) mentioned that this new element was not currently documented and tried a few more examples to see what other reasons could be generated. Since I'd already run Strings.exe on the SQL Server DLLs and EXE files, it was easy to run grep/find/findstr for MaxDOPSetToOne on those extracts.  Once I found which files it belonged to (sqlmin.dll) I opened the text to see if the other reasons were listed.  As you can see in my comment on Joe's blog, there were about 20 additional non-parallel reasons.  And while it's not "documentation" of this underdocumented feature, the names are pretty self-explanatory about what can prevent parallel processing. I especially like the ones about cursors – more ammo! - and am curious about the PDW compilation and Cloud DB replication reasons. One reason completely stumped me: NoParallelHekatonPlan.  What the heck is a hekaton?  Google and Wikipedia were vague, and the top results were not in English.  I found one reference to Greek, stating "hekaton" can be translated as "hundredfold"; with a little more Wikipedia-ing this leads to hecto, the prefix for "one hundred" as a unit of measure.  I'm not sure why Microsoft chose hekaton for such a plan name, but having already learned some Greek I figured I might as well dig some more in the DLL text for hekaton.  Here's what I found: hekaton_slow_param_passing Occurs when a Hekaton procedure call dispatch goes to slow parameter passing code path The reason why Hekaton parameter passing code took the slow code path hekaton_slow_param_pass_reason sp_deploy_hekaton_database sp_undeploy_hekaton_database sp_drop_hekaton_database sp_checkpoint_hekaton_database sp_restore_hekaton_database e:\sql11_main_t\sql\ntdbms\hekaton\sqlhost\sqllang\hkproc.cpp e:\sql11_main_t\sql\ntdbms\hekaton\sqlhost\sqllang\matgen.cpp e:\sql11_main_t\sql\ntdbms\hekaton\sqlhost\sqllang\matquery.cpp e:\sql11_main_t\sql\ntdbms\hekaton\sqlhost\sqllang\sqlmeta.cpp e:\sql11_main_t\sql\ntdbms\hekaton\sqlhost\sqllang\resultset.cpp Interesting!  The first 4 entries (in red) mention parameters and "slow code".  Could this be the foundation of the mythical DBCC RUNFASTER command?  Have I been passing my parameters the slow way all this time? And what about those sp_xxxx_hekaton_database procedures (in blue)? Could THEY be the secret to a faster SQL Server? Could they promise a "hundredfold" improvement in performance?  Are these special, super-undocumented DIB (databases in black)? I decided to look in the SQL Server system views for any objects with hekaton in the name, or references to them, in hopes of discovering some new code that would answer all my questions: SELECT name FROM sys.all_objects WHERE name LIKE '%hekaton%' SELECT name FROM sys.all_objects WHERE object_definition(OBJECT_ID) LIKE '%hekaton%' Which revealed: name ------------------------ (0 row(s) affected) name ------------------------ sp_createstats sp_recompile sp_updatestats (3 row(s) affected)   Hmm.  Well that didn't find much.  Looks like these procedures are seriously undocumented, unknown, perhaps forbidden knowledge. Maybe a part of some unspeakable evil? (No, I'm not paranoid, I just like mysteries and thought that punching this up with that kind of thing might keep you reading.  I know I'd fall asleep without it.) OK, so let's check out those 3 procedures and see what they reveal when I search for "Hekaton": sp_createstats: -- filter out local temp tables, Hekaton tables, and tables for which current user has no permissions -- Note that OBJECTPROPERTY returns NULL on type="IT" tables, thus we only call it on type='U' tables   OK, that's interesting, let's go looking down a little further: ((@table_type<>'U') or (0 = OBJECTPROPERTY(@table_id, 'TableIsInMemory'))) and -- Hekaton table   Wellllll, that tells us a few new things: There's such a thing as Hekaton tables (UPDATE: I'm not the only one to have found them!) They are not standard user tables and probably not in memory UPDATE: I misinterpreted this because I didn't read all the code when I wrote this blog post. The OBJECTPROPERTY function has an undocumented TableIsInMemory option Let's check out sp_recompile: -- (3) Must not be a Hekaton procedure.   And once again go a little further: if (ObjectProperty(@objid, 'IsExecuted') <> 0 AND ObjectProperty(@objid, 'IsInlineFunction') = 0 AND ObjectProperty(@objid, 'IsView') = 0 AND -- Hekaton procedure cannot be recompiled -- Make them go through schema version bumping branch, which will fail ObjectProperty(@objid, 'ExecIsCompiledProc') = 0)   And now we learn that hekaton procedures also exist, they can't be recompiled, there's a "schema version bumping branch" somewhere, and OBJECTPROPERTY has another undocumented option, ExecIsCompiledProc.  (If you experiment with this you'll find this option returns null, I think it only works when called from a system object.) This is neat! Sadly sp_updatestats doesn't reveal anything new, the comments about hekaton are the same as sp_createstats.  But we've ALSO discovered undocumented features for the OBJECTPROPERTY function, which we can now search for: SELECT name, object_definition(OBJECT_ID) FROM sys.all_objects WHERE object_definition(OBJECT_ID) LIKE '%OBJECTPROPERTY(%'   I'll leave that to you as more homework.  I should add that searching the system procedures was recommended long ago by the late, great Ken Henderson, in his Guru's Guide books, as a great way to find undocumented features.  That seems to be really good advice! Now if you're a programmer/hacker, you've probably been drooling over the last 5 entries for hekaton (in green), because these are the names of source code files for SQL Server!  Does this mean we can access the source code for SQL Server?  As The Oracle suggested to Neo, can we return to The Source??? Actually, no. Well, maybe a little bit.  While you won't get the actual source code from the compiled DLL and EXE files, you'll get references to source files, debugging symbols, variables and module names, error messages, and even the startup flags for SQL Server.  And if you search for "DBCC" or "CHECKDB" you'll find a really nice section listing all the DBCC commands, including the undocumented ones.  Granted those are pretty easy to find online, but you may be surprised what those web sites DIDN'T tell you! (And neither will I, go look for yourself!)  And as we saw earlier, you'll also find execution plan elements, query processing rules, and who knows what else.  It's also instructive to see how Microsoft organizes their source directories, how various components (storage engine, query processor, Full Text, AlwaysOn/HADR) are split into smaller modules. There are over 2000 source file references, go do some exploring! So what did we learn?  We can pull strings out of executable files, search them for known items, browse them for unknown items, and use the results to examine internal code to learn even more things about SQL Server.  We've even learned how to use command-line utilities!  We are now 1337 h4X0rz!  (Not really.  I hate that leetspeak crap.) Although, I must confess I might've gone too far with the "conspiracy" part of this post.  I apologize for that, it's just my overactive imagination.  There's really no hidden agenda or conspiracy regarding SQL Server internals.  It's not The Matrix.  It's not like you'd find anything like that in there: Attach Matrix Database DM_MATRIX_COMM_PIPELINES MATRIXXACTPARTICIPANTS dm_matrix_agents   Alright, enough of this paranoid ranting!  Microsoft are not really evil!  It's not like they're The Borg from Star Trek: ALTER FEDERATION DROP ALTER FEDERATION SPLIT DROP FEDERATION   #tsql2sday

    Read the article

  • How do I completely self study computer science?

    - by Optimus
    Being a completely self taught programmer I would like it if I could better myself by self-learning computer science course taught to a typical CS grad. Finding different resources on internet has been easy, there is of course MIT open course ware, and there are Coursera courses from Stanford and other universities. There are numerous other open resources scattered around the Internet and some good books that are repeatedly recommended. I have been learning a lot but my study is heavily fragmented, which really bugs me, I would love If somewhere I could find a path I should follow and a stack I should limit myself to so that I can be sure about what essential parts of computer science I have studied and systematically approach those I haven't. The problem with Wikipedia is it doesn't tell you whats essential but insists on being a complete reference. MIT open course ware for Computer science and Electrical Engg. has a huge list of courses also not telling you what courses are essential and what optional as per person's interest/requirement. I found no mention of an order in which one should study different subjects. What I would love is to create a list that I can follow like this dummy one SUBJECTS DONE Introduction to Computer Science * Introduction to Algorithms * Discrete Mathematics Adv. Discrete Mathematics Data structures * Adv. Algorithms ... As you can clearly see I have little idea of what specific subjects computer science consists of. It would be hugely helpful even if some one pointed out essential courses from MIT Course ware ( + essential subjects not present at MIT OCW) in a recommended order of study. I'll list the Posts I already went through (and I didn't get what I was looking for there) Computer science curriculum for non-CS major? - top answer says it isn't worth studying cse How can a self-taught programmer learn more about Computer Science? - points to MIT OCW Studying computer science - what am I getting myself into? Overview of computer science, programming

    Read the article

  • How do I configure postfix starttls

    - by Michael Temeschinko
    I need to install postfix on my webserver couse I need to use sendmail for my website. I only need to send mail not recieve or relay. send with starttls (port 587) via relay smtp.strato.de here is what happens Jul 15 00:02:38 negrita postfix/smtp[7120]: Host offered STARTTLS: [smtp.strato.de] Jul 15 00:02:38 negrita postfix/smtp[7120]: C717A181252: to=<[email protected]>, relay=smtp.strato.de[81.169.145.133]:587, delay=0.31, delays=0.09/0/0.16/0.04, dsn=5.7.0, status=bounced (host smtp.strato.de[81.169.145.133] said: 530 5.7.0 Bitte konfigurieren Sie ihr E-Mailprogramm fuer Authentifizierung am SMTP Server, wie auf www.strato.de/email-hilfe beschrieben. - Please configure your mail client for using SMTP Server Authentication (in reply to MAIL FROM command)) Jul 15 00:02:38 negrita postfix/cleanup[7118]: 29F5F181254: message-id=<20120714220238.29F5F181254@negrita> Jul 15 00:02:38 negrita postfix/qmgr[7102]: 29F5F181254: from=<>, size=2548, nrcpt=1 (queue active) Jul 15 00:02:38 negrita postfix/bounce[7121]: C717A181252: sender non-delivery notification: 29F5F181254 Jul 15 00:02:38 negrita postfix/qmgr[7102]: C717A181252: removed Jul 15 00:02:39 negrita postfix/local[7122]: 29F5F181254: to=<michael@negrita>, relay=local, delay=1.1, delays=0.04/0/0/1.1, dsn=2.0.0, status=sent (delivered to command: procmail -a "$EXTENSION") Jul 15 00:02:39 negrita postfix/qmgr[7102]: 29F5F181254: removed Jul 15 08:05:18 negrita postfix/master[1083]: daemon started -- version 2.9.1, configuration /etc/postfix Jul 15 08:05:29 negrita postfix/master[1083]: reload -- version 2.9.1, configuration /etc/postfix and my config michael@negrita:~$ postconf -n biff = no config_directory = /etc/postfix delay_warning_time = 4h home_mailbox = /home/michael/Maildir/ html_directory = /usr/share/doc/postfix/html inet_interfaces = localhost mailbox_command = procmail -a "$EXTENSION" mailbox_size_limit = 0 mydomain = example.com myhostname = negrita mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 notify_classes = resource, software, protocol readme_directory = /usr/share/doc/postfix recipient_delimiter = + relayhost = [smtp.strato.de]:587 smtp_sasl_password_maps = hash:/etc/postfix/sasl/passwd smtp_tls_enforce_peername = no smtp_tls_note_starttls_offer = yes smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) smtpd_sasl_auth_enable = yes smtpd_sasl_security_options = noanonymous smtpd_tls_cert_file = /etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file = /etc/ssl/private/ssl-cert-snakeoil.key smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_use_tls = yes soft_bounce = yes the user and password is ok couse I can send mail with my thunderbird thanks in advance mike

    Read the article

  • Start Debugging in Visual Studio

    - by Daniel Moth
    Every developer is familiar with hitting F5 and debugging their application, which starts their app with the Visual Studio debugger attached from the start (instead of attaching later). This is one way to achieve step 1 of the Live Debugging process. Hitting F5, F11, Ctrl+F10 and the other ways to start the process under the debugger is covered in this MSDN "How To". The way you configure the debugging experience, before you hit F5, is by selecting the "Project" and then the "Properties" menu (Alt+F7 on my keyboard bindings). Dependent on your project type there are different options, but if you browse to the Debug (or Debugging) node in the properties page you'll have a way to select local or remote machine debugging, what debug engines to use, command line arguments to use during debugging etc. Currently the .NET and C++ project systems are different, but one would hope that one day they would be unified to use the same mechanism and UI (I don't work on that product team so I have no knowledge of whether that is a goal or if it will ever happen). Personally I like the C++ one better, here is what it looks like (and it is described on this MSDN page): If you were following along in the "Attach to Process" blog post, the equivalent to the "Select Code Type" dialog is the "Debugger Type" dropdown: that is how you change the debug engine. Some of the debugger properties options appear on the standard toolbar in VS. With Visual Studio 11, the Debug Type option has been added to the toolbar If you don't see that in your installation, customize the toolbar to show it - VS 11 tends to be conservative in what you see by default, especially for the non-C++ Visual Studio profiles. Comments about this post by Daniel Moth welcome at the original blog.

    Read the article

  • How to push changes from Test server to Live server?

    - by anonymous
    As a beginner, I finally noticed the issue with making changes to the live server I've been working on, now that I have a couple users on it, since I bring it down so often. I created an EC2 image of my live server and set up a separate instance on EC2, so now I have 2 EC2 instances, Stage and Production. I set up GitHub and push changes to stage and test my code there, and when it's all done and working, I push it to the production branch, and everything is good. And there is a slight issue here since I name my files config_stage.js and config_production.js and set up .gitignore on each server, and in my code, I would have it read the ENV flags and set up the appropriate configs, is this the correct approach? And my main question is: how do you keep track of non-code changes to the server? For example, I installed HAProxy, Stunnel, Redis, MongoDB and several other things onto the Stage server for testing and now that it's all working and good, how do I deploy them to production? Right now, I'm just keeping track of everything I installed and copying configuration files over, which is very tedious and I'm afraid I may have missed a step somewhere. Is there a better way to port these changes over from my test server to my live server?

    Read the article

  • /users/tags should contain scores

    - by Sean Patrick Floyd
    I am implementing some simple JavaScript/bookmarklet based apps that show some reputation info, including the score in the User's top tags (roughly based on this previous bookmarklet of mine). Now I can get a user's top tags (using the API), and I can also get the per-tag score if the user is logged in, by dynamically parsing the tag's top users page. But it costs me one AJAX request per tag and I have to download 10+k to extract a single numeric value. It would save a lot of traffic if the tags in <api>/users/<userid>/tags had a score field. The data seems to be there, after all the top users pages use it, so it would just be a question of exposing the data. Suggested structure: "tags": [ { "name": { "description": "name of the tag", "values": "string", "optional": false, "suggested_buffer_size": 25 }, "score": { "description": "tag score, sum of up votes for answers on non-wiki questions", "values": "32-bit signed integer", "optional": false }, "count": { "description": "tag count, exact meaning depends on context", "values": "32-bit signed integer", "optional": false }, "restricted_to": { "description": "user types that can make use of this tag, lack of this field indicates it is useable by all", "values": "one of anonymous, unregistered, registered, or moderator", "optional": true }, "fulfills_required": { "description": "indicates whether this tag is one of those that is required to be on a post", "values": "boolean", "optional": false }, "user_id": { "description": "user associated with this tag, depends on context", "values": "32-bit signed integer", "optional": true } } ]

    Read the article

  • Code Bubbles: Disruption comes to the IDE

    - by andrewbrust
    If you’re like me, you might see the open source Eclipse IDE as a copy or, more generously, a port of the Microsoft’s Visual Studio for the non-.NET world.  It’s not that Microsoft invented the IDE (I would credit Borland with that), but they really took the idea and ran with it for the first version of Visual Studio .NET in 2002.  The question is whether someone outside of Microsoft could take the modern IDE yet another major step forward in both principle and productivity. I think that has actually happened already, and I think the innovator in question is a second-year Computer Science PhD student at Brown, named Andrew Bragdon.  His project, which he calls Code Bubbles, is an IDE that allows for editing, debugging and exploration of code in “bubbles” which remind me a little bit of the discrete note tiles on OneNote…but they’re much more than that.  Bubbles actually allow for call stack traversal, saved debug sessions, sophisticated breakpoint and value watch behaviors and more.  And because bubbles, unlike windows, are borderless, and focus on code fragments rather than whole files, the de-cluttering effect is unbelievably liberating.  The best way to understand what Code Bubbles does is to watch the screencast video:     Code Bubbles is an IDE for Java development.  Why didn’t Microsoft come up with something like this for .NET devs?  Between the existing features in Visual Studio 2010, its WPF code editor, and the fact that OneNote’s UI bears some affinity to Code Bubbles’, it’s interesting that Microsoft still has not thought outside of its own “box” to get us something like this. Heck, that’s easy for me to say.  But it’s easy for you to say that you’d like something like this in Visual Studio sometime soon.  That’s because the ASP.NET site within UserVoice is taking votes on this very issue.  Just click this link and vote! Thanks to my fellow Microsoft Regional Director Sondre Bjellås for making me aware of Code Bubbles, and to RD Steve Smith for creating the UserVoice voting option.

    Read the article

  • First toe in the water with Object Databases : DB4O

    - by REA_ANDREW
    I have been wanting to have a play with Object Databases for a while now, and today I have done just that.  One of the obvious choices I had to make was which one to use.  My criteria for choosing one today was simple, I wanted one which I could literally wack in and start using, which means I wanted one which either had a .NET API or was designed/ported to .NET.  My decision was between two being: db4o MongoDb I went for db4o for the single reason that it looked like I could get it running and integrated the quickest.  I am making a Blogging application and front end as a project with which I can test and learn with these object databases.  Another requirement which I thought I would mention is that I also want to be able to use the said database in a shared hosting environment where I cannot install, run and maintain a server instance of said object database.  I can do exactly this with db4o. I have not tried to do this with MongoDb at time of writing.  There are quite a few in the industry now and you read an interesting post about different ones and how they are used with some of the heavy weights in the industry here : http://blog.marcua.net/post/442594842/notes-from-nosql-live-boston-2010 In the example which I am building I am using StructureMap as my IOC.  To inject the object for db4o I went with a Singleton instance scope as I am using a single file and I need this to be available to any thread on in the process as opposed to using the server implementation where I could open and close client connections with the server handling each one respectively.  Again I want to point out that I have chosen to stick with the non server implementation of db4o as I wanted to use this in a shared hosting environment where I cannot have such servers installed and run.     public static class Bootstrapper    {        public static void ConfigureStructureMap()        {            ObjectFactory.Initialize(x => x.AddRegistry(new MyApplicationRegistry()));        }    }    public class MyApplicationRegistry : Registry    {        public const string DB4O_FILENAME = "blog123";        public string DbPath        {            get            {                return Path.Combine(Path.GetDirectoryName(Assembly.GetAssembly(typeof(IBlogRepository)).Location), DB4O_FILENAME);            }        }        public MyApplicationRegistry()        {            For<IObjectContainer>().Singleton().Use(                () => Db4oEmbedded.OpenFile(Db4oEmbedded.NewConfiguration(), DbPath));            Scan(assemblyScanner =>            {                assemblyScanner.TheCallingAssembly();                assemblyScanner.WithDefaultConventions();            });        }    } So my code above is the structure map plumbing which I use for the application.  I am doing this simply as a quick scratch pad to play around with different things so I am simply segregating logical layers with folder structure as opposed to different assemblies.  It will be easy if I want to do this with any segment but for the purposes of example I have literally just wacked everything in the one assembly.  You can see an example file structure I have on the right.  I am planning on testing out a few implementations of the object databases out there so I can program to an interface of IBlogRepository One of the things which I was unsure about was how it performed under a multi threaded environment which it will undoubtedly be used 9 times out of 10, and for the reason that I am using the db context as a singleton, I assumed that the library was of course thread safe but I did not know as I have not read any where in the documentation, again this is probably me not reading things correctly.  In short though I threw together a simple test where I simply iterate to a limit each time kicking a common task off with a thread from a thread pool.  This task simply created and added an random Post and added it to the storage. The execution of the threads I put inside the Setup of the Test and then simply ensure the number of posts committed to the database is equal to the number of iterations I made; here is the code I used to do the multi thread jobs: [TestInitialize] public void Setup() { var sw = new System.Diagnostics.Stopwatch(); sw.Start(); var resetEvent = new ManualResetEvent(false); ThreadPool.SetMaxThreads(20, 20); for (var i = 0; i < MAX_ITERATIONS; i++) { ThreadPool.QueueUserWorkItem(delegate(object state) { var eventToReset = (ManualResetEvent)state; var post = new Post { Author = MockUser, Content = "Mock Content", Title = "Title" }; Repository.Put(post); var counter = Interlocked.Decrement(ref _threadCounter); if (counter == 0) eventToReset.Set(); }, resetEvent); } WaitHandle.WaitAll(new[] { resetEvent }); sw.Stop(); Console.WriteLine("{0:00}.{1:00} seconds", sw.Elapsed.Seconds, sw.Elapsed.Milliseconds); }   I was not doing this to test out the speed performance of db4o but while I was doing this I could not help but put in a StopWatch and see out of sheer interest how fast it would take to insert a number of Posts.  I tested it out in this case with 10000 inserts of a small, simple POCO and it resulted in an average of:  899.36 object inserts / second.  Again this is just  simple crude test which came out of my curiosity at how it performed under many threads when using the non server implementation of db4o. The spec summary of the computer I used is as follows: With regards to the actual Repository implementation itself, it really is quite straight forward and I have to say I am very surprised at how easy it was to integrate and get up and running.  One thing I have noticed in the exposure I have had so far is that the Query returns IList<T> as opposed to IQueryable<T> but again I have not looked into this in depth and this could be there already and if not they have provided everything one needs to make there own repository.  An example of a couple of methods from by db4o implementation of the BlogRepository is below: public class BlogRepository : IBlogRepository { private readonly IObjectContainer _db; public BlogRepository(IObjectContainer db) { _db = db; } public void Put(DomainObject obj) { _db.Store(obj); } public void Delete(DomainObject obj) { _db.Delete(obj); } public Post GetByKey(object key) { return _db.Query<Post>(post => post.Key == key).FirstOrDefault(); } … Anyways I hope to get a few more implementations going of the object databases and literally just get familiarized with them and the concept of no sql databases. Cheers for now, Andrew

    Read the article

  • Log shipping and shrinking transaction logs

    - by DavidWimbush
    I just solved a problem that had me worried for a bit. I'm log shipping from three primary servers to a single secondary server, and the transaction log disk on the secondary server was getting very full. I established that several primary databases had unused space that resulted from big, one-off updates so I could shrink their logs. But would this action be log shipped and applied to the secondary database too? I thought probably not. And, more importantly, would it break log shipping? My secondary databases are in a Standby / Read Only state so I didn't think I could shrink their logs. I RTFMd, Googled, and asked on a Q&A site (not the evil one) but was none the wiser. So I was facing a monumental round of shrink, full backup, full secondary restore and re-start log shipping (which would leave us without a disaster recovery facility for the duration). Then I thought it might be worthwhile to take a non-essential database and just make absolutely sure a log shrink on the primary wouldn't ship over and occur on the secondary as well. So I did a DBCC SHRINKFILE and kept an eye on the secondary. Bingo! Log shipping didn't blink and the log on the secondary shrank too. I just love it when something turns out even better than I dared to hope. (And I guess this highlights something I need to learn about what activities are logged.)

    Read the article

  • Java JRE 7 Certified with Oracle E-Business Suite

    - by Steven Chan (Oracle Development)
    Java Runtime Environment 7u10 (a.k.a. JRE 1.7.0_10 build 18) and later updates on the JRE 7 codeline are now certified with Oracle E-Business Suite Release 11i and 12 Windows-based desktop clients. What's needed to enable EBS environments for JRE 7? EBS customers should ensure that they are running JRE 7u10, at minimum, on Windows desktop clients. Of the compatibility issues identified with JRE 7, the most critical is an issue that prevents E-Business Suite Forms-based products from launching on Windows desktops that are running JRE 7.  Customers can prevent this issue -- and all other JRE 7 compatibility issues -- by ensuring that they have applied the latest certified patches documented for JRE 7 configurations to their EBS application tier servers.  These are summarized here for convenience. If the requirements change over time, please check the Notes for the authoritative list of patches: Apply Forms patch 14615390 to EBS 11i environments (Note 125767.1) Apply Forms patch 14614795 to EBS 12.0 and 12.1 environments (Note 437878.1) These patches are compatible with JRE 6 and 7, production ready, and fully-tested with the E-Business Suite.  These patches may be applied immediately to all E-Business Suite environments. All other Forms prerequisites documented in the Notes above should also be applied.  Where are the official patch requirements documented? All patches required for ensuring full compatibility of the E-Business Suite with JRE 7 are documented in these Notes: For EBS 11i: Deploying Sun JRE (Native Plug-in) for Windows Clients in Oracle E-Business Suite Release 11i (Note 290807.1) Upgrading Developer 6i with Oracle E-Business Suite 11i (Note 125767.1) For EBS 12 Deploying Sun JRE (Native Plug-in) for Windows Clients in Oracle E-Business Suite Release 12 (Note 393931.1) Upgrading OracleAS 10g Forms and Reports in Oracle E-Business Suite Release 12 (Note 437878.1) Prerequisites for 32-bit and 64-bit JRE certifications JRE 1.70_10 32-bit + EBS 11.5.10.2 Windows XP SP3 Windows Vista SP1 and SP2 Windows 7 and Windows 7 SP1  Forms 6.0.8.28.x patch 14615390 (Note 125767.1) JRE 1.70_10 32-bit + EBS 12.0 & 12.1 Windows XP SP3 Windows Vista SP1 and SP2 Windows 7 and Windows 7 SP1 Forms 10g overlay patch 14614795 (Note 437878.1) SSL Users:  10.1.0.5 version of Patch 6370967 applied to AS 10.1.3 with OPatch. Note: This fix is already included in the April 2011 AS 10.1.3.5 CPU patch and later. JRE 1.7.0_10 64-bit + EBS 11.5.10.2 Windows 7 (64-bit) and Windows 7 SP1 (64-bit) Forms 6.0.8.28.x patch 14615390 (Note 125767.1) JRE 1.70_10 64-bit + EBS 12.0 & 12.1 Windows 7 (64-bit) and Windows 7 SP1 (64-bit) Forms 10g overlay patch 14614795 (Note 437878.1) SSL Users:  10.1.0.5 version of Patch 6370967 applied to AS 10.1.3 with OPatch. Note: This fix is already included in the April 2011 AS 10.1.3.5 CPU patch and later.  EBS + Discoverer 11g Users JRE 1.7.0_10 (7u10) is certified for Discoverer 11g in E-Business Suite environments with the following minimum requirements: Discoverer (11g) 11.1.1.6 plus Patch 13877486 and later  Reference: How To Find Oracle BI Discoverer 10g and 11g Certification Information (Document 233047.1) Worried about the 'mismanaged session cookie' issue? No need to worry -- it's fixed.  To recap: JRE releases 1.6.0_18 through 1.6.0_22 had issues with mismanaging session cookies that affected some users in some circumstances. The fix for those issues was first included in JRE 1.6.0_23. These fixes will carry forward and continue to be fixed in all future JRE releases on the JRE 6 and 7 codelines.  In other words, if you wish to avoid the mismanaged session cookie issue, you should apply any release after JRE 1.6.0_22 on the JRE 6 codeline, and JRE 7u10 and later JRE 7 codeline updates. All JRE 6 and 7 releases are certified with EBS upon release Our standard policy is that all E-Business Suite customers can apply all JRE updates to end-user desktops from JRE 1.6.0_03 and later updates on the 1.6 codeline, and from JRE 7u10 and later updates on the JRE 7 codeline.  We test all new JRE 1.6 and JRE 7 releases in parallel with the JRE development process, so all new JRE 1.6 and 7 releases are considered certified with the E-Business Suite on the same day that they're released by our Java team.  You do not need to wait for a certification announcement before applying new JRE 1.6 or JRE 7 releases to your EBS users' desktops. Implications of Java 6 End of Public Updates for EBS Users The Support Roadmap for Oracle Java is published here: Oracle Java SE Support Roadmap The latest updates to that page (as of Sept. 19, 2012) state (emphasis added): Java SE 6 End of Public Updates Notice After February 2013, Oracle will no longer post updates of Java SE 6 to its public download sites. Existing Java SE 6 downloads already posted as of February 2013 will remain accessible in the Java Archive on Oracle Technology Network. Developers and end-users are encouraged to update to more recent Java SE versions that remain available for public download. For enterprise customers, who need continued access to critical bug fixes and security fixes as well as general maintenance for Java SE 6 or older versions, long term support is available through Oracle Java SE Support . What does this mean for Oracle E-Business Suite users? EBS users fall under the category of "enterprise users" above.  Java is an integral part of the Oracle E-Business Suite technology stack, so EBS users will continue to receive Java SE 6 updates after February 2013. In other words, nothing will change for EBS users after February 2013.  EBS users will continue to receive critical bug fixes and security fixes as well as general maintenance for Java SE 6. These Java SE 6 updates will be made available to EBS users for the Extended Support periods documented in the Oracle Lifetime Support policy document for Oracle Applications (PDF): EBS 11i Extended Support ends November 2013 EBS 12.0 Extended Support ends January 2015 EBS 12.1 Extended Support ends December 2018 Will EBS users be forced to upgrade to JRE 7 for Windows desktop clients? No. This upgrade is highly recommended but currently remains optional. JRE 6 will be available to Windows users to run with EBS for the duration of your respective EBS Extended Support period.  Updates will be delivered via My Oracle Support, where you can continue to receive critical bug fixes and security fixes as well as general maintenance for JRE 6 desktop clients.  Coexistence of JRE 6 and JRE 7 on Windows desktops The upgrade to JRE 7 is highly recommended for EBS users, but some users may need to run both JRE 6 and 7 on their Windows desktops for reasons unrelated to the E-Business Suite. Most EBS configurations with IE and Firefox use non-static versioning by default. JRE 7 will be invoked instead of JRE 6 if both are installed on a Windows desktop. For more details, see "Appendix B: Static vs. Non-static Versioning and Set Up Options" in Notes 290801.1 and 393931.1. Applying Updates to JRE 6 and JRE 7 to Windows desktops Auto-update will keep JRE 7 up-to-date for Windows users with JRE 7 installed. Auto-update will only keep JRE 7 up-to-date for Windows users with both JRE 6 and 7 installed.  JRE 6 users are strongly encouraged to apply the latest Critical Patch Updates as soon as possible after each release. The Jave SE CPUs will be available via My Oracle Support.  EBS users can find more information about JRE 6 and 7 updates here: Information Center: Installation & Configuration for Oracle Java SE (Note 1412103.2) The dates for future Java SE CPUs can be found on the Critical Patch Updates, Security Alerts and Third Party Bulletin.  An RSS feed is available on that site for those who would like to be kept up-to-date. What will Mac users need? Oracle will provide updates to JRE 7 for Mac OS X users. EBS users running Macs will need to upgrade to JRE 7 to receive JRE updates. The certification of Oracle E-Business Suite with JRE 7 for Mac-based desktop clients accessing EBS Forms-based content is underway. Mac users waiting for that certification may find this article useful: How to Reenable Apple Java 6 Plug-in for Mac EBS Users Will EBS users be forced to upgrade to JDK 7 for EBS application tier servers? No. This upgrade will be highly recommended but will be optional for EBS application tier servers running on Windows, Linux, and Solaris.  You can choose to remain on JDK 6 for the duration of your respective EBS Extended Support period.  If you remain on JDK 6, you will continue to receive critical bug fixes and security fixes as well as general maintenance for JDK 6. The certification of Oracle E-Business Suite with JDK 7 for EBS application tier servers on Windows, Linux, and Solaris as well as other platforms such as IBM AIX and HP-UX is planned.  Customers running platforms other than Windows, Linux, and Solaris should refer to their Java vendors's sites for more information about their support policies. References Recommended Browsers for Oracle Applications 11i (Metalink Note 285218.1) Upgrading Sun JRE (Native Plug-in) with Oracle Applications 11i for Windows Clients (Metalink Note 290807.1) Recommended Browsers for Oracle Applications 12 (MetaLink Note 389422.1) Upgrading JRE Plugin with Oracle Applications R12 (MetaLink Note 393931.1) Related Articles Mismanaged Session Cookie Issue Fixed for EBS in JRE 1.6.0_23 Roundup: Oracle JInitiator 1.3 Desupported for EBS Customers in July 2009

    Read the article

  • How to penetrate the QA industry after layoffs, next steps...

    - by Erik
    Briefly, my background is in manual black box testing of websites and applications within the Agile/waterfall context. Over the past four years I was a member of two web development firms' small QA teams dedicated to testing the deployment of websites for national/international non profits, governmental organizations, and for profit business, to name a few: -Brookings Institution -Senate -Tyco Electronics -Blue Cross/Blue Shield -National Geographic -Discover Channel I have a very strong understanding of the: -SDLC -STLC of bugs and website deployment/development -Use Case & Test Case development In March of this year, my last firm downsized and lost my job as a QA tester. I have been networking and doing a very detailed job search, but have had a very difficult time getting my next job within the QA industry, even with my background as a manual black box QA tester in the website development context. My direct question to all of you: What are some ways I can be more competitive and get hired? Options that could get me competitive: Should I go back to school and learn some more 'hard' skills in website development and client side technologies, e.g.: -HTML -CSS -JavaScript Learn programming: -PHP -C# -Ruby -SQL -Python -Perl -?? Get Certified as a QA Tester, there are a countless numbers of programs to become a Certified Tester. Most, if not all jobs, being advertised now require Automated Testing experience, in: -QTP -Loadrunner -Selenium -ETC. Should I learn, Automated testing skills, via a paid course, or teach myself? --Learn scripting languages to understand the automated testing process better? Become a Certified "Project Management Professional" (PMP) to prove to hiring managers that I 'get' the project development life cycle? At the end of the day I need to be competitive and get hired as a QA tester and want to build upon my skills within the QA web development field. How should I do this, without reinventing the wheel? Any help in this regard would be fabulous. Thanks! .erik

    Read the article

  • Serve web application error messages from Http server [closed]

    - by licorna
    I have nginx as a http server with tomcat as a backend (using proxy_pass). It works great but I want to define my own error pages (404, 500, etc.) and that they are served by nginx and not tomcat. For example I have the following resource: https://domain.com/resource which doesn't exist. If I [GET] that URL then I get a Not Found message from Tomcat and not from nginx. What I want is that every time Tomcat responds with a 404 (or any other error message) nginx sends itself a message to the user: some html file accessible by nginx. The way I have my nginx server configured is very easy, just: location / { proxy_pass http://localhost:8080/<webapp-name>/; } And I've configured port 8080, which is tomcat, as not accessible from outside this machine. I don't think that using different location directives in nginx configuration will work, because there are some resources that depend on the URL: https://domain.com/customer/<non-existent-customer-name>/[GET] Will always return 404 (or any other error message), while: https://domain.com/customer/<existent-customer>/[GET] Will return anything different from 404 (the customer exists). Is there any way of serving Tomcat (Application Server) error messages with Nginx (http Server)? To check the message sent by the proxy_pass directive and act upon it?

    Read the article

  • Can I delete libc-bin?

    - by Balazs Szikszay
    Question is simple, I need to know because I cant upgrade/install anything, because it always says I have to uninstall/delete it to continue. It also says dont do it, if I dont know what I am doing. EDIT: szikszay@szikszay-Latitude-E5530-non-vPro:~$ sudo apt-get upgrade Reading package lists... Done Building dependency tree Reading state information... Done You might want to run ‘apt-get -f install’ to correct these. The following packages have unmet dependencies. ia32-libs-multiarch:i386 : Depends: libqtcore4:i386 but it is not installed Depends: libqtgui4:i386 but it is not installed Depends: libqt4-dbus:i386 but it is not installed Depends: libqt4-network:i386 but it is not installed Depends: libqt4-opengl:i386 but it is not installed Depends: libqt4-qt3support:i386 but it is not installed Depends: libqt4-script:i386 but it is not installed Depends: libqt4-scripttools:i386 but it is not installed Depends: libqt4-sql:i386 but it is not installed Depends: libqt4-svg:i386 but it is not installed Depends: libqt4-test:i386 but it is not installed Depends: libqt4-xml:i386 but it is not installed Depends: libqt4-xmlpatterns:i386 but it is not installed Depends: libcups2:i386 but it is not installed Depends: libcupsimage2:i386 but it is not installed Depends: libcurl3:i386 but it is not installed Depends: libnss3:i386 but it is not installed Depends: libnspr4:i386 but it is not installed Depends: libssl1.0.0:i386 but it is not installed Recommends: libgl1-mesa-glx:i386 but it is not installed Recommends: libgl1-mesa-dri:i386 but it is not installed lib32ffi6 : Depends: libc6-i386 (= 2.4) but it is not installed lib32gcc1 : Depends: libc6-i386 (= 2.5) but it is not installed lib32nss-mdns : Depends: libc6-i386 (= 2.4) but it is not installed lib32stdc++6 : Depends: libc6-i386 (= 2.4) but it is not installed lib32z1 : Depends: libc6-i386 (= 2.4) but it is not installed libacl1:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libattr1:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libaudio2:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libavahi-client3:i386 : Depends: libc6:i386 (= 2.4) but it is not installed Depends: libdbus-1-3:i386 (= 1.1.1) but it is not installed libavahi-common3:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libcomerr2:i386 : Depends: libc6:i386 (= 2.12) but it is not installed libdb5.1:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libdrm-intel1:i386 : Depends: libc6:i386 (= 2.3.4) but it is not installed libdrm-nouveau1a:i386 : Depends: libc6:i386 (= 2.1.3) but it is not installed libdrm-radeon1:i386 : Depends: libc6:i386 (= 2.3.4) but it is not installed libdrm2:i386 : Depends: libc6:i386 (= 2.7) but it is not installed libffi6:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libfontconfig1:i386 : Depends: libc6:i386 (= 2.7) but it is not installed Depends: libexpat1:i386 (= 1.95.8) but it is not installed Depends: libfreetype6:i386 (= 2.2.1) but it is not installed libgcc1:i386 : Depends: libc6:i386 (= 2.2.4) but it is not installed libgcrypt11:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libgdbm3:i386 : Depends: libc6:i386 (= 2.1.3) but it is not installed libglib2.0-0:i386 : Depends: libc6:i386 (= 2.9) but it is not installed libgpg-error0:i386 : Depends: libc6:i386 (= 2.1.3) but it is not installed libice6:i386 : Depends: libc6:i386 (= 2.11) but it is not installed libidn11:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libjpeg62:i386 : Depends: libc6:i386 (= 2.7) but it is not installed libkeyutils1:i386 : Depends: libc6:i386 (= 2.1.3) but it is not installed liblcms1:i386 : Depends: libc6:i386 (= 2.7) but it is not installed libllvm2.9:i386 : Depends: libc6:i386 (= 2.11) but it is not installed libmng1:i386 : Depends: libc6:i386 (= 2.11) but it is not installed libpciaccess0:i386 : Depends: libc6:i386 (= 2.7) but it is not installed libpcre3:i386 : Depends: libc6:i386 (= 2.4) but it is not installed librtmp0:i386 : Depends: libc6:i386 (= 2.7) but it is not installed Depends: libgnutls26:i386 (= 2.9.11-0) but it is not installed libsasl2-2:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libsasl2-modules:i386 : Depends: libc6:i386 (= 2.4) but it is not installed Depends: libssl1.0.0:i386 (= 1.0.0) but it is not installed libselinux1:i386 : Depends: libc6:i386 (= 2.8) but it is not installed libsm6:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libsqlite3-0:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libstdc++6:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libuuid1:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libx11-6:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libxau6:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libxcb1:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libxdamage1:i386 : Depends: libc6:i386 (= 2.1.3) but it is not installed libxdmcp6:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libxext6:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libxfixes3:i386 : Depends: libc6:i386 (= 2.1.3) but it is not installed libxrender1:i386 : Depends: libc6:i386 (= 2.1.3) but it is not installed libxss1:i386 : Depends: libc6:i386 (= 2.1.3) but it is not installed libxt6:i386 : Depends: libc6:i386 (= 2.7) but it is not installed libxxf86vm1:i386 : Depends: libc6:i386 (= 2.1.3) but it is not installed zlib1g:i386 : Depends: libc6:i386 (= 2.4) but it is not installed E: Unmet dependencies. Try using -f. szikszay@szikszay-Latitude-E5530-non-vPro:~$ sudo apt-get upgrade -f Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following packages will be REMOVED libc-bin The following NEW packages will be installed libc-bin:i386 libc6:i386 libc6-i386 libcups2:i386 libcupsimage2:i386 libcurl3:i386 libdbus-1-3:i386 libexpat1:i386 libfreetype6:i386 libgl1-mesa-dri:i386 libgl1-mesa-glx:i386 libglapi-mesa:i386 libgnutls26:i386 libgssapi-krb5-2:i386 libk5crypto3:i386 libkrb5-3:i386 libkrb5support0:i386 libldap-2.4-2:i386 libnspr4:i386 libnss3:i386 libpng12-0:i386 libqt4-dbus:i386 libqt4-declarative:i386 libqt4-designer:i386 libqt4-network:i386 libqt4-opengl:i386 libqt4-qt3support:i386 libqt4-script:i386 libqt4-scripttools:i386 libqt4-sql:i386 libqt4-svg:i386 libqt4-test:i386 libqt4-xml:i386 libqt4-xmlpatterns:i386 libqtcore4:i386 libqtgui4:i386 libssl1.0.0:i386 libtasn1-3:i386 libtiff4:i386 libxi6:i386 The following packages have been kept back: ginn libgrip0 linux-headers-generic linux-image-generic unity unity-common xserver-xorg-input-evdev xserver-xorg-input-synaptics The following packages will be upgraded: accountsservice acpi-support acpid aisleriot alsa-utils app-install-data-partner apparmor appmenu-qt apport apport-gtk apt apt-transport-https apt-utils aptdaemon aptdaemon-data apturl apturl-common at-spi2-core bamfdaemon banshee banshee-extension-soundmenu banshee-extension-ubuntuonemusicstore baobab bind9-host binutils bluez bluez-alsa bluez-cups bluez-gstreamer brasero brasero-cdrkit brasero-common brltty bzip2 ca-certificates-java checkbox checkbox-gtk colord command-not-found command-not-found-data compiz compiz-core compiz-gnome compiz-plugins-default compiz-plugins-main-default cups cups-bsd cups-client cups-common cups-ppdc dbus dbus-x11 deja-dup desktop-file-utils dnsutils dpkg ecryptfs-utils empathy empathy-common eog evince evince-common evolution-data-server evolution-data-server-common file-roller firefox firefox-globalmenu firefox-gnome-support firefox-locale-en firefox-locale-hu gbrainy gcalctool gconf2 gconf2-common gedit gedit-common ghostscript ghostscript-cups ghostscript-x gir1.2-atspi-2.0 gir1.2-gconf-2.0 gir1.2-gnomebluetooth-1.0 gir1.2-gtk-3.0 gir1.2-gtksource-3.0 gir1.2-totem-1.0 gir1.2-unity-4.0 gir1.2-webkit-3.0 gnome-accessibility-themes gnome-bluetooth gnome-control-center gnome-control-center-data gnome-desktop3-data gnome-font-viewer gnome-games-common gnome-icon-theme gnome-keyring gnome-mahjongg gnome-online-accounts gnome-orca gnome-power-manager gnome-screenshot gnome-search-tool gnome-session gnome-session-bin gnome-session-canberra gnome-session-common gnome-settings-daemon gnome-sudoku gnome-system-log gnome-system-monitor gnome-utils-common gnomine gnupg gpgv grub-common grub-pc grub-pc-bin grub2-common gstreamer0.10-gconf gstreamer0.10-plugins-good gstreamer0.10-pulseaudio gvfs gvfs-backends gvfs-bin gvfs-fuse gwibber gwibber-service gwibber-service-facebook gwibber-service-identica gwibber-service-twitter gzip hpijs hplip hplip-cups hplip-data icedtea-6-jre-cacao icedtea-6-jre-jamvm icedtea-netx ifupdown im-switch indicator-datetime indicator-session indicator-sound initramfs-tools initramfs-tools-bin initscripts insserv isc-dhcp-client isc-dhcp-common iso-codes jockey-common jockey-gtk language-pack-en language-pack-en-base language-pack-gnome-en language-pack-gnome-en-base language-pack-gnome-hu language-pack-gnome-hu-base language-pack-hu language-pack-hu-base language-selector-common language-selector-gnome libaccountsservice0 libapt-inst1.3 libapt-pkg4.11 libarchive1 libasound2-plugins libatk-adaptor libatspi2.0-0 libbamf0 libbamf3-0 libbind9-60 libbluetooth3 libbrasero-media3-1 libbrlapi0.5 libbz2-1.0 libc-dev-bin libc6 libc6-dev libcamel-1.2-29 libcanberra-gtk-module libcanberra-gtk0 libcanberra-gtk3-0 libcanberra-gtk3-module libcanberra-pulse libcanberra0 libcolord1 libcups2 libcupscgi1 libcupsdriver1 libcupsimage2 libcupsmime1 libcupsppdc1 libcurl3-gnutls libdbus-1-3 libdbus-glib-1-2 libdecoration0 libdns69 libebackend-1.2-1 libebook1.2-12 libecal1.2-10 libecryptfs0 libedata-book-1.2-11 libedata-cal-1.2-13 libedataserver1.2-15 libedataserverui-3.0-1 libevince3-3 libexif12 libexpat1 libfreetype6 libgail-3-0 libgail-3-common libgck-1-0 libgconf2-4 libgcr-3-1 libgdata-common libgdata13 libgl1-mesa-dri libgl1-mesa-glx libglapi-mesa libglu1-mesa libgnome-bluetooth8 libgnome-control-center1 libgnome-desktop-3-2 libgnutls26 libgoa-1.0-0 libgs9 libgs9-common libgssapi-krb5-2 libgtk-3-0 libgtk-3-bin libgtk-3-common libgtksourceview-3.0-0 libgtksourceview-3.0-common libgudev-1.0-0 libgweather-3-0 libgweather-common libgwibber-gtk2 libgwibber2 libhpmud0 libicu44 libimobiledevice2 libisc62 libisccc60 libisccfg62 libjasper1 libjs-jquery libk5crypto3 libkrb5-3 libkrb5support0 libldap-2.4-2 liblightdm-gobject-1-0 liblwres60 libmetacity-private0 libmission-control-plugins0 libmono-cairo4.0-cil libmono-corlib4.0-cil libmono-csharp4.0-cil libmono-i18n-west4.0-cil libmono-i18n4.0-cil libmono-posix4.0-cil libmono-security4.0-cil libmono-sharpzip4.84-cil libmono-system-configuration4.0-cil libmono-system-core4.0-cil libmono-system-drawing4.0-cil libmono-system-security4.0-cil libmono-system-xml4.0-cil libmono-system4.0-cil libmono-zeroconf1.0-cil libmysqlclient16 libnautilus-extension1 libncurses5 libncursesw5 libnm-glib-vpn1 libnm-glib4 libnm-gtk-common libnm-gtk0 libnm-util2 libnotify0.4-cil libnspr4 libnss3 libnss3-1d libnux-1.0-0 libnux-1.0-common libpam-gnome-keyring libpam-modules libpam-modules-bin libpam-runtime libpam0g libperl5.12 libpng12-0 libpoppler-glib6 libpoppler13 libproxy0 libpulse-mainloop-glib0 libpulse0 libpurple-bin libpurple0 libpython2.7 libqt4-dbus libqt4-declarative libqt4-network libqt4-opengl libqt4-script libqt4-sql libqt4-sql-mysql libqt4-svg libqt4-xml libqt4-xmlpatterns libqtcore4 libqtgui4 libreoffice-base-core libreoffice-calc libreoffice-common libreoffice-core libreoffice-draw libreoffice-emailmerge libreoffice-gnome libreoffice-gtk libreoffice-help-en-gb libreoffice-help-en-us libreoffice-help-hu libreoffice-impress libreoffice-l10n-common libreoffice-l10n-en-gb libreoffice-l10n-en-za libreoffice-l10n-hu libreoffice-math libreoffice-style-human libreoffice-writer libsane-hpaio libsmbclient libsnmp-base libsnmp15 libssl1.0.0 libsyncdaemon-1.0-1 libt1-5 libtasn1-3 libtiff4 libtinfo5 libtotem0 libubuntuone-1.0-1 libubuntuone1.0-cil libudev0 libunity-core-4.0-4 libunity6 libusbmuxd1 libv4l-0 libvorbis0a libvorbisenc2 libvorbisfile3 libwbclient0 libwebkitgtk-1.0-0 libwebkitgtk-1.0-common libwebkitgtk-3.0-0 libwebkitgtk-3.0-common libxi6 libxml2 libxslt1.1 lightdm linux-firmware linux-libc-dev mawk metacity metacity-common mobile-broadband-provider-info modemmanager mono-4.0-gac mono-gac mono-runtime mousetweaks multiarch-support mysql-common nautilus nautilus-data nautilus-sendto-empathy ncurses-base ncurses-bin network-manager network-manager-gnome nux-tools onboard openjdk-6-jre openjdk-6-jre-headless openjdk-6-jre-lib openssl perl perl-base perl-modules poppler-utils pulseaudio pulseaudio-esound-compat pulseaudio-module-bluetooth pulseaudio-module-gconf pulseaudio-module-x11 pulseaudio-utils python-apport python-aptdaemon python-aptdaemon-gtk python-aptdaemon.gtk3widgets python-aptdaemon.gtkwidgets python-brlapi python-crypto python-cups python-cupshelpers python-egenix-mxdatetime python-egenix-mxtools python-gobject python-gobject-cairo python-httplib2 python-keyring python-launchpadlib python-libproxy python-libxml2 python-pam python-papyon python-pkg-resources python-problem-report python-pyatspi2 python-software-properties python-ubuntuone-client python-ubuntuone-storageprotocol python-uno python2.7 python2.7-minimal qdbus samba-common samba-common-bin seahorse shotwell simple-scan smbclient sni-qt software-center software-properties-common software-properties-gtk sudo system-config-printer-common system-config-printer-gnome system-config-printer-udev sysv-rc sysvinit-utils telepathy-indicator telepathy-mission-control-5 thunderbird thunderbird-globalmenu thunderbird-gnome-support thunderbird-locale-en thunderbird-locale-en-gb thunderbird-locale-en-us thunderbird-locale-hu tomboy totem totem-common totem-mozilla totem-plugins transmission-common transmission-gtk ttf-opensymbol tzdata tzdata-java ubuntu-desktop ubuntu-docs ubuntu-minimal ubuntu-sso-client ubuntu-standard ubuntuone-client ubuntuone-client-gnome ubuntuone-couch udev unity-lens-applications unity-services uno-libs3 update-manager update-manager-core update-notifier update-notifier-common upstart ure usbmuxd vim-common vim-tiny vinagre vino whois x11-common xdiagnose xorg xserver-common xserver-xorg xserver-xorg-core xserver-xorg-input-all xserver-xorg-video-all xserver-xorg-video-intel xserver-xorg-video-openchrome xserver-xorg-video-qxl xul-ext-ubufox WARNING: The following essential packages will be removed. This should NOT be done unless you know exactly what you are doing! libc-bin 498 upgraded, 40 newly installed, 1 to remove and 8 not upgraded. 69 not fully installed or removed. Need to get 439 MB of archives. After this operation, 135 MB of additional disk space will be used. You are about to do something potentially harmful To continue type in the phrase ‘Yes, do as I say!’ ?] I tried to upgrade but it gives me an error, when i try to upgrade-f it says i should delete libc-bin. Thanks for the answers btw. EDIT2: it also says this: The package system is broken If you are using third party repositories then disable them, since they are a common source of problems. Now run the following command in a terminal: apt-get install -f

    Read the article

  • Ameristar Wins with Oracle GoldenGate’s Heterogeneous Real-Time Data Integration

    - by Irem Radzik
    Today we announced a press release about another successful project with Oracle GoldenGate. This time at Ameristar. Ameristar is a casino gaming company and needed a single data integration solution to connect multiple heterogeneous systems to its Teradata data warehouse. The project involves integration of Ameristar’s promotional and gaming data from 14 data sources across its 7 casino hotel properties in real time into a central Teradata data warehouse. The source systems include the Aristocrat gaming and MGT promotional management platforms running on Microsoft SQL Server 2000 databases. As you can notice, there was no Oracle Database involved in this project, but Ameristar’s IT leadership knew that  GoldenGate’s strong heterogeneous and real-time data integration capabilities is the right technology for their data warehousing project. With GoldenGate Ameristar was able to reduce data latency to the enterprise data warehouse, and use this real-time customer information for marketing teams in improving overall customer experience. Ameristar customers receive more targeted and timely campaign offers, and the company has more up-to-date visibility into financial metrics of the company. One other key benefit the company experienced with GoldenGate is in operational costs. The previous data capture solution Ameristar used was trigger based and required a lot of effort to manage. They needed dedicated IT staff to maintain it. With GoldenGate, the solution runs seamlessly without needing a fully-dedicated staff, giving the IT team at Ameristar more resources for their other IT projects. If you want to learn more about GoldenGate and the latest features for Oracle Database and non-Oracle databases, please watch our on demand webcast about Oracle GoldenGate 11g Release 2.

    Read the article

  • Cant add network printer with system-config-printer package

    - by Erick David Ruiz Coronel
    Hello im new here and I dont know if im doing it right but I hope yes. I have a printer conected to a windows 8 machine, also I had ubuntu 13.04 and it worked fine when I printed from linux to windows but when I upgraded to 13.10 my printer didnt worked, I removed it thinking that would fix it but when I tryed to add the printer again I couldnt, I reinstalled cups and the system-config-printer-gnome package but didnt worked. Here is the terminal log : erick@Tauro:~$ system-config-printer Caught non-fatal exception. Traceback: File "/usr/share/system-config-printer/probe_printer.py", line 255, in _do_find fn () File "/usr/share/system-config-printer/probe_printer.py", line 367, in _probe_hplip stderr=null) File "/usr/lib/python2.7/subprocess.py", line 709, in init errread, errwrite) File "/usr/lib/python2.7/subprocess.py", line 1326, in _execute_child raise child_exception OSError: [Errno 2] No existe el archivo o el directorio Continuing anyway.. Traceback (most recent call last): File "/usr/share/system-config-printer/newprinter.py", line 912, in on_btnNPForward_clicked self.nextNPTab() File "/usr/share/system-config-printer/newprinter.py", line 1064, in nextNPTab stderr=file("/dev/null")) File "/usr/lib/python2.7/subprocess.py", line 709, in init errread, errwrite) File "/usr/lib/python2.7/subprocess.py", line 1326, in _execute_child raise child_exception OSError: [Errno 2] No existe el archivo o el directorio Any suggestion please? C:

    Read the article

  • Entity Framework &amp; Transactions

    - by Sudheer Kumar
    There are many instances we might have to use transactions to maintain data consistency. With Entity Framework, it is a little different conceptually. Case 1 – Transaction b/w multiple SaveChanges(): here if you just use a transaction scope, then Entity Framework (EF) will use distributed transactions instead of local transactions. The reason is that, EF closes and opens the connection when ever required only, which means, it used 2 different connections for different SaveChanges() calls. To resolve this, use the following method. Here we are opening a connection explicitly so as not to span across multipel connections.   using (TransactionScope ts = new TransactionScope()) {     context.Connection.Open();     //Operation1 : context.SaveChanges();     //Operation2 :  context.SaveChanges()     //At the end close the connection     ts.Complete(); } catch (Exception ex) {       //Handle Exception } finally {       if (context.Connection.State == ConnectionState.Open)       {            context.Connection.Close();       } }   Case 2 – Transaction between DB & Non-DB operations: For example, assume that you have a table that keeps track of Emails to be sent. Here you want to update certain details like DataSent once if the mail was successfully sent by the e-mail client. Email eml = GetEmailToSend(); eml.DateSent = DateTime.Now; using (TransactionScope ts = new TransactionScope()) {    //Update DB    context.saveChanges();   //if update is successful, send the email using smtp client   smtpClient.Send();   //if send was successful, then commit   ts.Complete(); }   Here since you are dealing with a single context.SaveChanges(), you just need to use the TransactionScope, just before saving the context only.   Hope this was helpful!

    Read the article

  • Rendering with Direct3D

    - by Jamie
    Hi, I'm slightly confused about how Direct3D rendering works. Basically, as long as I render to one surface, everything is fine. But when I try rendering to multiple surfaces, it seems like everything is still rendered to one surface. I think there's something wrong with my calls. For each update cycle this is what I do 1. device-BeginScene() 2. sprite-Begin(...) ... A bunch of GetRenderTarget to store the old render target, then SetRenderTarget to set a new surface, and then things like CreateVertexBuffer, SetTexture, etc to draw on the new render target. Then resetting to the old render target. sprite-Draw([the back buffer]) (the back buffer is actually another surface, not the actual back buffer. But here it is being drawn onto the actual back buffer, I think) sprite-End() device-EndScene() device-Present(...) Also, it seems like if I mix sprite drawing and non-sprite drawing onto a surface, that first one set of render commands is executed and then the other set, rather than in order by when each command was called. If anyone could shed light on any of this, it would be much appreciated.

    Read the article

  • Designing a social network with CQRS, graph databases and relational databases in mind

    - by Siraj Mansour
    I have done quite an amount of research on the topic so far, but i couldn't come up with a conclusion to make up my mind. I am designing a social network and during my research i stumbled upon graph databases, i found neo4j pretty interesting for user relations and traversing through nodes. I also thought of using a relational database such as MS-SQL or MySQL to store entity data only and depending on neo4j for connections between entities. Of course this means more work in my application to store and pull data in and out of 2 different sources. My first question : Is using this approach (graph + relational) a good approach for designing my social network keeping in mind that users on social networks don't have to in synch with real data by split second ? What are the positives and negatives of this approach ? My Second question : I've been doing some reading on CQRS and as i understood it is mostly useful for collaborative environments, and environments where users see a lot of "stale" data. social networks has shared comments, events, etc .. and many users query or update the same data. Could CQRS be a helpful approach ? Would it give any performance/scalability benefits or non-useful complexity ? Is it fairly applicable with my possible choice of (graph + relational) databases approach mentioned in the question above ? My purpose is to know if the approaches i have mentioned above seem good enough for the business context.

    Read the article

  • Does HTML 5 &ldquo;Rich vs. Reach&rdquo; a False Choice?

    - by andrewbrust
    The competition between the Web and proprietary rich platforms, including Windows, Mac OS, iPhone/iPad, Adobe’s Flash/AIR and Microsoft’s Silverlight, is not new. But with the emergence of HTML 5 and imminent support for it in the next release of the major Web browsers, the battle is heating up. And with the announcements made Wednesday at Google's I/O conference, it's getting kicked up yet another notch. The impact of this platform battle on companies in the media and advertising world, and the developers who serve them, is significant. The most prominent question is whether video and rich media online will shift towards pure HTML and away from plug-ins like Flash and Silverlight. In fact, certain features in HTML 5 make it suitable for development for line of business applications as well, further threatening those plug-in technologies. So what's the deal? Is this real or hype? To answer that question, I've done my own research into HTML 5's features and talked to several media-focused, New York area developers to get their opinions. I present my findings to you in this post. Before bearing down into HTML 5 specifics and practitioners’ quotes, let's set the context. To understand what HTML 5 can do, take a look at this video of Sports Illustrated’s HTML 5 prototype. This should start to get you bought into the idea that HTML 5 could be a game-changer. Next, if you happen to have installed the beta version of Google's Chrome 5 browser, take a look at the page linked to below, and in that page, click on any of the game thumbnails to see what's possible, without a plug-in, in this brave new world. (Note, although the instructions for each game tell you to press the A key to start, press the Z key instead.). Here's the link: http://www.kesiev.com/akihabara As an adjunct to what's enabled by HTML 5, consider the various transforms that are part of CSS 3. If you're running Safari as your browser, the following link will showcase this live; if not, you'll see a bitmap that will give you an idea of what's possible: http://webkit.org/blog/386/3d-transforms Are you starting to get the picture (literally)? What has up until now required browser plug-ins and other patches to HTML, most typically Flash, will soon be renderable, natively, in all major browsers. Moreover, it's looking likely that developers will be able to deliver such content and experiences in these browsers using one base of markup and script code (using straight JavaScript and/or jQuery), without resorting to browser-specific code and workarounds. If you're skeptical of this, I wouldn't blame you, especially with respect to Microsoft's Internet Explorer. However, i can tell you with confidence that even Microsoft is dedicated to full-on HTML 5 support in version 9 of that browser, which is currently under development. So what’s new in HTML 5, specifically, that makes sites like this possible?  The specification documents go into deep detail, and there’s no sense in rehashing them here, but a summary is probably in order.   Here is a non-authoritative, but useful, list of the major new feature areas in HTML 5: 2D drawing capabilities and 3D transforms. 2D drawing instructions can be embedded statically into a Web page; application interactivity and animation can be achieved through script.  As mentioned above, 3D transforms are technically part of version 3 of the CSS (Cascading Style Sheets) spec, rather than HTML 5, but they can nonetheless be thought of as part of the bundle.  They allow for rendering of 3D images and animations that, together with 2D drawing, make HTML-based games much more feasible than they are presently, as the links above demonstrate. Embedded audio and video. A media player can appear directly in a rendered Web page, using HTML markup and no plug-ins. Alternately, player controls can be hidden and the content can play automatically. Major enhancements to form-based input. This includes such things as specification of required fields, embedding of text “hints” into a control, limiting valid input on a field to dates, email addresses or a list of values.  There’s more to this, but the gist is that line-of-business applications, with complicated input and data validation, are supported directly Offline caching, local storage and client-side SQL database. These facilities allow Web applications to function more like native apps, even if no internet connection is available. User-defined data. Data (or metadata – data about data) can easily be embedded statically and/or retrieved and updated with Javascript code. This avoids having to embed that data in a separate file, or within script code. Taken together, these features position HTML to compete with, and perhaps overtake, Adobe’s Flash/AIR (and Microsoft’s Silverlight) as a viable Web platform for media, RIAs (rich internet applications – apps that function more like desktop software than Web sites) and interactive Web content, including games. What do players in the media world think about this?  From the embedded video above, we know what Sports Illustrated (and, therefore, Time Warner) think.  Hulu, the major Internet site for broadcast TV content, is on record as saying HTML5 video does not pass muster with them, at least not yet.  YouTube, on the other hand, already has an experimental HTML 5-based version of their site.  TechCrunch has reported that NetFlix is flirting with HTML 5 too, especially as it pertains to embedded browsers in TV-based devices.  And the New York Times’ Web site now embeds some video clips without resorting to Flash.  They have to – otherwise iPhone, iPod Touch and iPad users couldn’t see them in the Mobile Safari browser. What do media-focused developers think about all this?  I talked to several to get their opinions. Michael Pinto is CEO and Founder of Very Memorable Design whose primary focus has been to help marketing directors get traction online.  The firm’s client roster includes the likes Time, Inc., Scholastic and PBS.  Pinto predicts that “More and more microsites that were done entirely in Flash will be done more and more using jQuery. I can also see slideshows and video now being done without Flash. However if you needed to create a game or highly interactive activity Flash would still be the way to go for the web.” A dissenting view comes from Jesse Erlbaum, CEO of The Erlbaum Group, LLC, which serves numerous clients in the magazine publishing sector.  When I asked Erlbaum whether he thought HTML 5 and jQuery/JavaScript would steal significant market share from Flash, he responded “Not at all!  In particular, not for media and advertising customers!  These sectors are not generally in the business of making highly functional applications, which is the one place where HTML5/jQuery/etc really shines.” Ironically, Pinto’s firm is a heavy user of Flash for its projects and Erlbaum’s develops atop the “LAMP” (Linux, Apache, MySQL and PHP/Perl) stack.  For whatever reason, each firm seems to see the other’s toolset as a more viable choice.  But both agree that the developer tool story around HTML 5 is deficient.  Pinto explains “What’s lost with [HTML 5 and Javascript] techniques is that there isn’t a single widely favored easy-to-use tool of choice for authoring. So with Flash you can get up and running right away and not worry about what is different from one browser to the next.“  Erlbaum agrees, saying: “HTML5/Javascript lacks a sophisticated integrated development environment (IDE) which is an essential part of Flash.  If what someone is trying to make is primarily animation, it's a waste of time…to do this in Javascript.  It can be done much more easily in Flash, and with greater cross-browser compatibility and consistency due to the ubiquity of Flash.” Adobe (maker of Flash since its 2005 acquisition of Macromedia) likely agrees.  And for better or worse, they’ve decided to address this shortcoming of HTML 5, even at risk of diminishing their Flash platfrom. Yesterday Adobe announced that their hugely popular Deamweaver Web design authoring tool would directly support HTML 5 and CSS 3 development.  In fact, the Adobe Dreamweaver CS5 HTML5 Pack is downloadable now from Adobe Labs. Maybe Adobe is bowing to pressure from ardent Web professionals like Scott Kellum, Lead Designer at Channel V Media,  a digital and offline branding firm, serving the media and marketing sectors, among others.  Kellum told me that HTML 5 “…will definitely move people away from Flash. It has many of the same functionalities with faster load times and better accessibility. HTML5 will help Flash as well: with the new caching methods you can now even run Flash apps offline.” Although all three Web developers I interviewed would agree that Flash is still required for more sophisticated applications, Kellum seems to have put his finger on why HTML 5 may nonetheless dominate.  In his view, much of the Web development out there has little need for high-end capabilities: “Most people want to add a little punch to a navigation bar or some video and now you can get the biggest bang for your buck with HTML5, CSS3 and Javascript.” I’ve already mentioned that Google’s ongoing I/O conference, at the Moscone West center in San Francisco, is driving the HTML 5 news cycle, big time.  And Google made many announcements of their own, including the open sourcing of their VP8 video codec, new enterprise-oriented capabilities for its App Engine cloud offering, and the creation of the Chrome Web Store, which the company says will make it easier to find and “install” Web applications, in a fashion similar to  the way users procure native apps on various mobile platforms. HTML 5 looks to be disruptive, especially to the media world.  And even if the technology ends up disappointing, the chatter around it alone is causing big changes in the technology world.  If the richness it promises delivers, then magazine publishers and non-text digital advertisers may indeed have a platform for creating compelling content that loads quickly, is standards-based and will render identically in (the newest versions of) all major Web browsers.  Can this development in the digital arena save the titans of the print world?  I can’t predict, but it’s going to be fun to watch, and the competitive innovation from all players in both industries will likely be immense.

    Read the article

  • guvcview recording video and audio out of synchronisation in Ubuntu 10.10

    - by SIJAR
    I finally got Guvcview, a great software for Logitech webcam and it does all the stuff that one wants out of it. But I'm not satisfy with the video recording, video and audio out of synchronisation also video seems to be in slow motion. Please help so that I can tweak in and get a good video recording with the webcam. Below is the log of Guvcview ------------------------------------------------------------------------------- guvcview 1.4.1 video_device: /dev/video0 vid_sleep: 0 cap_meth: 1 resolution: 640 x 480 windowsize: 1024 x 715 vert pane: 578 spin behavior: 0 mode: mjpg fps: 1/25 Display Fps: 0 bpp: 0 hwaccel: 1 avi_format: 4 sound: 1 sound Device: 4 sound samp rate: 0 sound Channels: 0 Sound delay: 0 nanosec Sound Format: 85 Pan Step: 2 degrees Tilt Step: 2 degrees Video Filter Flags: 0 image inc: 0 profile(default):/home/sijar/default.gpfl starting portaudio... bt_audio_service_open: connect() failed: Connection refused (111) bt_audio_service_open: connect() failed: Connection refused (111) bt_audio_service_open: connect() failed: Connection refused (111) bt_audio_service_open: connect() failed: Connection refused (111) Cannot connect to server socket err = No such file or directory Cannot connect to server socket jack server is not running or cannot be started language catalog= dir:/usr/share/locale type:UTF-8 lang:en_US.utf8 cat:guvcview.mo mjpg: setting format to 1196444237 capture method = 1 video device: /dev/video0 libv4lconvert: warning more framesizes then I can handle! libv4lconvert: warning more framesizes then I can handle! /dev/video0 - device 1 libv4lconvert: warning more framesizes then I can handle! libv4lconvert: warning more framesizes then I can handle! Init. UVC Camera (046d:0825) (location: usb-0000:00:1d.7-5) { pixelformat = 'YUYV', description = 'YUV 4:2:2 (YUYV)' } { discrete: width = 640, height = 480 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 160, height = 120 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 176, height = 144 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 320, height = 176 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 320, height = 240 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 352, height = 288 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 432, height = 240 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 544, height = 288 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 640, height = 360 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, ... repeats a couple of times ... vid:046d pid:0825 driver:uvcvideo Adding control for Pan (relative) UVCIOC_CTRL_ADD - Error: Operation not permitted checking format: 1196444237 VIDIOC_G_COMP:: Invalid argument compression control not supported fps is set to 1/25 drawing controls control[0]: 0x980900 Brightness, 0:255:1, default 128 control[0]: 0x980901 Contrast, 0:255:1, default 32 control[0]: 0x980902 Saturation, 0:255:1, default 32 control[0]: 0x98090c White Balance Temperature, Auto, 0:1:1, default 1 control[0]: 0x980913 Gain, 0:255:1, default 0 control[0]: 0x980918 Power Line Frequency, 0:2:1, default 2 control[0]: 0x98091a White Balance Temperature, 0:10000:10, default 4000 control[0]: 0x98091b Sharpness, 0:255:1, default 24 control[0]: 0x98091c Backlight Compensation, 0:1:1, default 1 control[0]: 0x9a0901 Exposure, Auto, 0:3:1, default 3 control[0]: 0x9a0902 Exposure (Absolute), 1:10000:1, default 166 control[0]: 0x9a0903 Exposure, Auto Priority, 0:1:1, default 0 resolutions of format(2) = 19 frame rates of 1º resolution=6 Def. Res: 0 numb. fps:6 --------------------------------------- device #0 Name = Intel 82801DB-ICH4: Intel 82801DB-ICH4 (hw:0,0) Host API = ALSA Max inputs = 2, Max outputs = 2 Def. low input latency = 0.012 Def. low output latency = 0.012 Def. high input latency = 0.046 Def. high output latency = 0.046 Def. sample rate = 44100.00 --------------------------------------- device #1 Name = Intel 82801DB-ICH4: Intel 82801DB-ICH4 - MIC ADC (hw:0,1) Host API = ALSA Max inputs = 2, Max outputs = 0 Def. low input latency = 0.011 Def. low output latency = -1.000 Def. high input latency = 0.043 Def. high output latency = -1.000 Def. sample rate = 48000.00 --------------------------------------- device #2 Name = Intel 82801DB-ICH4: Intel 82801DB-ICH4 - MIC2 ADC (hw:0,2) Host API = ALSA Max inputs = 2, Max outputs = 0 Def. low input latency = 0.011 Def. low output latency = -1.000 Def. high input latency = 0.043 Def. high output latency = -1.000 Def. sample rate = 48000.00 --------------------------------------- device #3 Name = Intel 82801DB-ICH4: Intel 82801DB-ICH4 - ADC2 (hw:0,3) Host API = ALSA Max inputs = 2, Max outputs = 0 Def. low input latency = 0.011 Def. low output latency = -1.000 Def. high input latency = 0.043 Def. high output latency = -1.000 Def. sample rate = 48000.00 --------------------------------------- device #4 Name = Intel 82801DB-ICH4: Intel 82801DB-ICH4 - IEC958 (hw:0,4) Host API = ALSA Max inputs = 0, Max outputs = 2 Def. low input latency = -1.000 Def. low output latency = 0.011 Def. high input latency = -1.000 Def. high output latency = 0.043 Def. sample rate = 48000.00 --------------------------------------- device #5 Name = USB Device 0x46d:0x825: USB Audio (hw:1,0) Host API = ALSA Max inputs = 1, Max outputs = 0 Def. low input latency = 0.011 Def. low output latency = -1.000 Def. high input latency = 0.043 Def. high output latency = -1.000 Def. sample rate = 48000.00 --------------------------------------- device #6 Name = front Host API = ALSA Max inputs = 0, Max outputs = 2 Def. low input latency = -1.000 Def. low output latency = 0.012 Def. high input latency = -1.000 Def. high output latency = 0.046 Def. sample rate = 44100.00 --------------------------------------- device #7 Name = iec958 Host API = ALSA Max inputs = 0, Max outputs = 2 Def. low input latency = -1.000 Def. low output latency = 0.011 Def. high input latency = -1.000 Def. high output latency = 0.043 Def. sample rate = 48000.00 --------------------------------------- device #8 Name = spdif Host API = ALSA Max inputs = 0, Max outputs = 2 Def. low input latency = -1.000 Def. low output latency = 0.011 Def. high input latency = -1.000 Def. high output latency = 0.043 Def. sample rate = 48000.00 --------------------------------------- device #9 Name = pulse Host API = ALSA Max inputs = 32, Max outputs = 32 Def. low input latency = 0.012 Def. low output latency = 0.012 Def. high input latency = 0.046 Def. high output latency = 0.046 Def. sample rate = 44100.00 --------------------------------------- device #10 Name = dmix Host API = ALSA Max inputs = 0, Max outputs = 2 Def. low input latency = -1.000 Def. low output latency = 0.043 Def. high input latency = -1.000 Def. high output latency = 0.043 Def. sample rate = 48000.00 --------------------------------------- device #11 [ Default Input, Default Output ] Name = default Host API = ALSA Max inputs = 32, Max outputs = 32 Def. low input latency = 0.012 Def. low output latency = 0.012 Def. high input latency = 0.046 Def. high output latency = 0.046 Def. sample rate = 44100.00 ---------------------------------------------- SampleRate:0 Channels:0 Video driver: x11 A window manager is available VIDIOC_S_EXT_CTRLS for multiple controls failed (error -1) using VIDIOC_S_CTRL for user class controls control(0x0098091a) "White Balance Temperature" failed to set (error -1) VIDIOC_S_EXT_CTRLS for multiple controls failed (error -1) using VIDIOC_S_EXT_CTRLS on single controls for class: 0x009a0000 control(0x009a0902) "Exposure (Absolute)" failed to set (error -1) VIDIOC_S_EXT_CTRLS for multiple controls failed (error -1) using VIDIOC_S_CTRL for user class controls control(0x0098091a) "White Balance Temperature" failed to set (error -1) VIDIOC_S_EXT_CTRLS for multiple controls failed (error -1) using VIDIOC_S_EXT_CTRLS on single controls for class: 0x009a0000 control(0x009a0902) "Exposure (Absolute)" failed to set (error -1) Cap Video toggled: 1 (/home/sijar/Videos/Webcam) 25371756K bytes free on a total of 39908968K (used: 36 %) treshold=51200K using audio codec: 0x0055 Audio frame size is 1152 samples for selected codec IO thread started...OK [libx264 @ 0x8cbd8b0]using cpu capabilities: MMX2 SSE2 Cache64 [libx264 @ 0x8cbd8b0]profile Baseline, level 3.0 [libx264 @ 0x8cbd8b0]non-strictly-monotonic PTS shift sound by -9 ms shift sound by -9 ms shift sound by -9 ms AUDIO: droping audio data AUDIO: droping audio data AUDIO: droping audio data AUDIO: droping audio data AUDIO: droping audio data ... repeats a couple of times ... AUDIO: droping audio data (/home/sijar/Videos/Webcam) 25371748K bytes free on a total of 39908968K (used: 36 %) treshold=51200K AUDIO: droping audio data AUDIO: droping audio data ... repeats a couple of times ... Cap Video toggled: 0 Shuting Down IO Thread AUDIO: droping audio data stop= 4426644744000 start=4416533023000 VIDEO: 146 frames in 10111.000000 ms = 14.439719 fps Stoping audio stream Closing audio stream... close avi Last message repeated 145 times [libx264 @ 0x8cbd8b0]frame I:2 Avg QP:14.10 size: 24492 [libx264 @ 0x8cbd8b0]frame P:103 Avg QP:16.06 size: 20715 [libx264 @ 0x8cbd8b0]mb I I16..4: 48.4% 0.0% 51.6% [libx264 @ 0x8cbd8b0]mb P I16..4: 57.5% 0.0% 0.0% P16..4: 40.2% 0.0% 0.0% 0.0% 0.0% skip: 2.3% [libx264 @ 0x8cbd8b0]final ratefactor: 62.05 [libx264 @ 0x8cbd8b0]coded y,uvDC,uvAC intra: 79.7% 92.2% 68.4% inter: 62.4% 87.5% 48.0% [libx264 @ 0x8cbd8b0]i16 v,h,dc,p: 23% 17% 41% 19% [libx264 @ 0x8cbd8b0]i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 30% 24% 26% 2% 5% 3% 3% 3% 4% [libx264 @ 0x8cbd8b0]i8c dc,h,v,p: 53% 20% 23% 4% [libx264 @ 0x8cbd8b0]ref P L0: 63.0% 37.0% [libx264 @ 0x8cbd8b0]kb/s:-0.00 total frames encoded: 0 total audio frames encoded: 0 IO thread finished...OK IO Thread finished enabling controls Cap Video toggled: 1 (/home/sijar/Videos/Webcam) 25379744K bytes free on a total of 39908968K (used: 36 %) treshold=51200K using audio codec: 0x0055 Audio frame size is 1152 samples for selected codec IO thread started...OK [libx264 @ 0x8cfba20]using cpu capabilities: MMX2 SSE2 Cache64 [libx264 @ 0x8cfba20]profile Baseline, level 3.0 [libx264 @ 0x8cfba20]non-strictly-monotonic PTS shift sound by -236 ms shift sound by -236 ms shift sound by -236 ms (/home/sijar/Videos/Webcam) 25377044K bytes free on a total of 39908968K (used: 36 %) treshold=51200K (/home/sijar/Videos/Webcam) 25373408K bytes free on a total of 39908968K (used: 36 %) treshold=51200K AUDIO: droping audio data AUDIO: droping audio data AUDIO: droping audio data AUDIO: droping audio data AUDIO: droping audio data AUDIO: droping audio data ... repeats a couple of times ... (/home/sijar/Videos/Webcam) 25370696K bytes free on a total of 39908968K (used: 36 %) treshold=51200K AUDIO: droping audio data AUDIO: droping audio data AUDIO: droping audio data ... repeats a couple of times ... (/home/sijar/Videos/Webcam) 25367680K bytes free on a total of 39908968K (used: 36 %) treshold=51200K (/home/sijar/Videos/Webcam) 25364052K bytes free on a total of 39908968K (used: 36 %) treshold=51200K (/home/sijar/Videos/Webcam) 25360312K bytes free on a total of 39908968K (used: 36 %) treshold=51200K (/home/sijar/Videos/Webcam) 25356628K bytes free on a total of 39908968K (used: 36 %) treshold=51200K (/home/sijar/Videos/Webcam) 25352908K bytes free on a total of 39908968K (used: 36 %) treshold=51200K (/home/sijar/Videos/Webcam) 25349316K bytes free on a total of 39908968K (used: 36 %) treshold=51200K (/home/sijar/Videos/Webcam) 25345552K bytes free on a total of 39908968K (used: 36 %) treshold=51200K (/home/sijar/Videos/Webcam) 25341828K bytes free on a total of 39908968K (used: 36 %) treshold=51200K (/home/sijar/Videos/Webcam) 25338092K bytes free on a total of 39908968K (used: 36 %) treshold=51200K (/home/sijar/Videos/Webcam) 25334412K bytes free on a total of 39908968K (used: 36 %) treshold=51200K Cap Video toggled: 0 Shuting Down IO Thread stop= 4708817235000 start=4578624714000 VIDEO: 1604 frames in 130192.000000 ms = 12.320265 fps Stoping audio stream Closing audio stream... close avi Last message repeated 1603 times [libx264 @ 0x8cfba20]frame I:16 Avg QP:14.78 size: 42627 [libx264 @ 0x8cfba20]frame P:1547 Avg QP:16.44 size: 28599 [libx264 @ 0x8cfba20]mb I I16..4: 21.6% 0.0% 78.4% [libx264 @ 0x8cfba20]mb P I16..4: 28.1% 0.0% 0.0% P16..4: 70.5% 0.0% 0.0% 0.0% 0.0% skip: 1.4% [libx264 @ 0x8cfba20]final ratefactor: 88.17 [libx264 @ 0x8cfba20]coded y,uvDC,uvAC intra: 74.4% 95.8% 83.2% inter: 75.2% 94.6% 69.2% [libx264 @ 0x8cfba20]i16 v,h,dc,p: 27% 17% 40% 16% [libx264 @ 0x8cfba20]i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 25% 25% 21% 3% 6% 4% 5% 4% 7% [libx264 @ 0x8cfba20]i8c dc,h,v,p: 61% 18% 18% 4% [libx264 @ 0x8cfba20]ref P L0: 64.0% 36.0% [libx264 @ 0x8cfba20]kb/s:-0.00 total frames encoded: 0 total audio frames encoded: 0 IO thread finished...OK IO Thread finished enabling controls Shuting Down Thread Thread terminated... cleaning Thread allocations: 100% SDL Quit Video Thread finished write /home/sijar/.guvcviewrc OK free audio mutex closed v4l2 strutures free controls free controls - vidState cleaned allocations - 100% Closing portaudio ...OK Closing GTK... OK

    Read the article

  • WebLogic Weekly for June 20th, 2011

    - by james.bayer
    Welcome the first the first edition of the WebLogic Weekly.  The WebLogic Server team has been trying to extend our community outreach to new mediums like an Oracle WebLogic Youtube Channel (how-to videos and feature showcases), Twitter (sharing WebLogic links, typically blogs), and a Facebook page to do a better job sharing information, providing learning alternatives to product documentation and perhaps most importantly collecting feedback from all of our users using the tools they prefer.  This is our attempt to provide a round-up what has been going on in WebLogic over the past week.  If you would like to have something shared here, use the #weblogic tag on tweets, post on the Oracle WebLogic facebook page, or comment on these blog entries. Blogs WebLogic Server: Listing Groups of an Authenticated User by Steve Button Weblogic, QBrowser And Topics by Eric Elzinga Weblogic, Topics And (Non)-Durable Subscribers by Eric Elzinga Database Web Service using Toplink DB Provider by Vishal Jain WebLogic Server – Use the Execution Context ID in Applications – Lessons From Hansel and Gretel by James Bayer Getting All Server’s Lifecycle State in a Domain by Jay SenSharma Steps to Move Messages From One Queue To Another Queue Using WLST (Updated Version) by Ravish Mody Events If you want to share a story of something innovative you or your organization has done with WebLogic Server or other Fusion Middleware, you could win a pass to Oracle Open World 2011 and share the story there.  See Ruma Sanyal's posting on the Application Grid blog for details.  The deadline for submissions is July 22nd, 2011.

    Read the article

  • Craftsmanship is ALL that Matters

    - by Wayne Molina
    Today, I'm going to talk about a touchy subject: the notion of working in a company that doesn't use the prescribed "best practices" in its software development endeavours.  Over the years I have, using a variety of pseudonyms, asked this question on popular programming forums.  Although I always add in some minor variation of the story to avoid suspicion that it's the same person posting, the crux of the tale remains the same: A Programmer’s Tale A junior software developer has just started a new job at an average company, creating average line-of-business applications for internal use (the most typical scenario programmers find themselves in).  This hypothetical newbie has spent a lot of time reading up on the "theory" of software development, devouring books, blogs and screencasts from well-known and respected software developers in the community in order to broaden his knowledge and "do what the pros do".  He begins his new job, eager to apply what he's learned on a real-world project only to discover that his new teammates doesn't use any of those concepts and techniques.  They hack their way through development, or in a best-case scenario use some homebrew, thrown-together semblance of a framework for their applications that follows not one of the best practices suggested by the “elite” in the software community - things like TDD (TDD as a "best practice" is the only subjective part of this post, but it's included here due to a very large following of respected developers who consider it one), the SOLID principles, well-known and venerable tools, even version control in a worst case and truly nightmarish scenario.  Our protagonist is frustrated that he isn't doing things the "proper" way - a way he's spent personal time digesting and learning about and, more importantly, a way that some of the top developers in the industry advocate - and turns to a forum to ask the advice of his peers. Invariably the answer I, in the guise of the concerned newbie, will receive is that A) I don't know anything and should just shut my mouth and sling code the bad way like everybody else on the team, and B) These "best practices" are fade or a joke, and the only thing that matters is shipping software to your customers. I am here today to say that anyone who says this, or anything like it, is not only full of crap but indicative of exactly the type of “developer” that has helped to give our industry a bad name.  Here is why: One Who Knows Nothing, Understands Nothing On one hand, you have the cognoscenti of the .NET development world.  Guys like James Avery, Jeremy Miller, Ayende Rahien and Rob Conery; all well-respected and noted programmers that are pretty much our version of celebrities.  These guys write blogs, books, and post videos outlining the "correct" way of writing software to make sure it not only works but is maintainable and extensible and a joy to work with.  They tout the virtues of the SOLID principles, or of using TDD/BDD, or using a mature ORM like NHibernate, Subsonic or even Entity Framework. On the other hand, you have Joe Everyman, Lead Software Developer at Initrode Corporation - in our hypothetical story Joe is the junior developer's new boss.  Joe's been with Initrode for 10 years, starting as the company’s very first programmer and over the years building up a little fiefdom of his own until at the present he’s in charge of all Initrode’s software development.  Joe writes code the same way he always has, without bothering to learn much, if anything.  He looked at NHibernate once and found it was "too hard", so he uses a primitive implementation of the TableDataGateway pattern as a wrapper around SqlClient.SqlConnection and SqlClient.SqlCommand instead of an actual ORM (or, in a better case scenario, has created his own ORM); the thought of using LINQ or Entity Framework or really anything other than his own hastily homebrew solution has never occurred to him.  He doesn't understand TDD and considers “testing” to be using the .NET debugger to step through code, or simply loading up an app and entering some values to see if it works.  He doesn't really understand SOLID, and he doesn't care to.  He's worked as a programmer for years, and that's all that counts.  Right?  WRONG. Who would you rather trust?  Someone with years of experience and who writes books, creates well-known software and is akin to a celebrity, or someone with no credibility outside their own minute environment who throws around their clout and company seniority as the "proof" of their ability?  Joe Everyman may have years of experience at Initrode as a programmer, and says to do things "his way" but someone like Jeremy Miller or Ayende Rahien have years of experience at companies just like Initrode, THEY know ten times more than Joe Everyman knows or could ever hope to know, and THEY say to do things "this way". Here's another way of thinking about it: If you wanted to get into politics and needed advice on the best way to do it, would you rather listen to the mayor of Hicktown, USA or Barack Obama?  One is a small-time nobody while the other is very well-known and, as such, would probably have much more accurate and beneficial advice. NOTE: The selection of Barack Obama as an example in no way, shape, or form suggests a political affiliation or political bent to this post or blog, and no political innuendo should be mistakenly read from it; the intent was merely to compare a small-time persona with a well-known persona in a non-software field.  Feel free to replace the name "Barack Obama" with any well-known Congressman, Senator or US President of your choice. DIY Considered Harmful I will say right now that the homebrew development environment is the WORST one for an aspiring programmer, because it relies on nothing outside it's own little box - no useful skill outside of the small pond.  If you are forced to use some half-baked, homebrew ORM created by your Director of Software, you are not learning anything valuable you can take with you in the future; now, if you plan to stay at Initrode for 10 years like Joe Everyman, this is fine and dandy.  However if, like most of us, you want to advance your career outside a very narrow space you will do more harm than good by sticking it out in an environment where you, to be frank, know better than everybody else because you are aware of alternative and, in almost most cases, better tools for the job.  A junior developer who understands why the SOLID principles are good to follow, or why TDD is beneficial, or who knows that it's better to use NHibernate/Subsonic/EF/LINQ/well-known ORM versus some in-house one knows better than a senior developer with 20 years experience who doesn't understand any of that, plain and simple.  Anyone who disagrees is either a liar, or someone who, just like Joe Everyman, Lead Developer, relies on seniority and tenure rather than adapting their knowledge as things evolve. In many cases, the Joe Everymans of the world act this way out of fear - they cannot possibly fathom that a “junior” could know more than them; after all, they’ve spent 10 or more years in the same company, doing the same job, cranking out the same shoddy software.  And here comes a newbie who hasn’t spent 10+ years doing the same things, with a fresh and often radical take on the craft, and Joe Everyman is afraid he might have to put some real effort into his career again instead of just pointing to his 10 years of service at Initrode as “proof” that he’s good, or that he might have to learn something new to improve; in most cases the problem is Joe Everyman, and by extension Initrode itself, has a mentality of just being “good enough”, and mediocrity is the rule of the day. A Thorn Bush is No Place for a Phoenix My advice is that if you work on a team where they don't use the best practices that some of the most famous developers in our field say is the "right" way to do things (and have legions of people who agree), and YOU are aware of these practices and can see why they work, then LEAVE the company.  Find a company where they DO care about quality, and craftsmanship, otherwise you will never be happy.  There is no point in "dumbing" yourself down to the level of your co-workers and slinging code without care to craftsmanship.  In 95% of these situations there will be no point in bringing it to the attention of Joe Everyman because he won't listen; he might even get upset that someone is trying to "upstage" him and fire the newbie, and replace someone with loads of untapped potential with a drone that will just nod affirmatively and grind out the tasks assigned without question. Find a company that has people smart enough to listen to the "best and brightest", and be happy.  Do not, I repeat, DO NOT waste away in a job working for ignorant people.  At the end of the day software development IS a craft, and a level of craftsmanship is REQUIRED for any serious professional.  When you have knowledgeable people with the credibility to back it up saying one thing, and small-time people who are, to put it bluntly, nobodies in the field saying and doing something totally different because they can't comprehend it, leave the nobodies to their own devices to fade into obscurity.  Work for a company that uses REAL software engineering techniques and really cares about craftsmanship.  The biggest issue affecting our career, and the reason software development has never been the respected, white-collar career it was meant to be, is because hacks and charlatans can pass themselves off as professional programmers without following a lick of good advice from programmers much better at the craft than they are.  These modern day snake-oil salesmen entrench themselves in companies by hoodwinking non-technical businesspeople and customers with their shoddy wares, end up in senior/lead/executive positions, and push their lack of knowledge on everybody unfortunate enough to work with/for/under them, crushing any dissent or voices of reason and change under their tyrannical heel and leaving behind a trail of dismayed and, often, unemployed junior developers who were made examples of to keep up the facade and avoid the shadow of doubt being cast upon them. To sum this up another way: If you surround yourself with learned people, you will learn.  Surround yourself with ignorant people who can't, as the saying goes, see the forest through the trees, and you'll learn nothing of any real value.  There is more to software development than just writing code, and the end goal should not be just "shipping software", it should be shipping software that is extensible, maintainable, and above all else software whose creation has broadened your knowledge in some capacity, even if a minor one.  An eager newbie who knows theory and thirsts for knowledge can easily be moulded and taught the advanced topics, but the same can't be said of someone who only cares about the finish line.  This industry needs more people espousing the benefits of software craftsmanship and proper software engineering techniques, and less Joe Everymans who are unwilling to adapt or foster new ways of thinking. Conclusion - I Cast “Protection from Fire” I am fairly certain this post will spark some controversy and might even invite the flames.  Please keep in mind these are opinions and nothing more.  A little healthy rant and subsequent flamewar can be good for the soul once in a while.  To paraphrase The Godfather: It helps to get rid of the bad blood.

    Read the article

< Previous Page | 327 328 329 330 331 332 333 334 335 336 337 338  | Next Page >