Search Results

Search found 11240 results on 450 pages for 'partition boot sector'.

Page 331/450 | < Previous Page | 327 328 329 330 331 332 333 334 335 336 337 338  | Next Page >

  • Grub Doesn't Load after Update

    - by Parris
    Hi Everyone, After I updated ubuntu (I believe it was most likely a kernel update) and restarted I selected ubuntu from the windows boot loader (I am using wubi). At this point I would usually land on the grub loader; however, I see something about NTFS file not found and a couple other screens flash then the computer restarts. I have tried pressing ESC right after to try and get some options, but I think grub is just not found or something... Not sure what is going on.. Any help would be much appreciated :). Thanks!

    Read the article

  • No sound with a Creative Labs Soundblaster live EMU10K1X

    - by Geo
    I just installed ubuntu. things seems great but I have no sound. When I go to the settings menu I chose from various setup. I found one that work which had 4 speakers a subwofer and a front speaker. When I test it the sound works fine. However, when I try playing an *.mp3 file or try to watch a video on you tube I get no sound at all. I have a dual boot with windows XP and there is no problem in windows at all. Below is my setup. OS: ubuntu 11.10 machine: dell dimension 8300 speakers: dell creative lab sounblaster live EMU10K1X video: ATI RADEON R350 [Radeon 9800 Pro] secondary Following https://wiki.ubuntu.com/DebuggingSoundProblems did not help.

    Read the article

  • Can't install Ubuntu 13.10 from 12.04 lts

    - by Matt Carle
    I have ubuntu 12.04 lts installed on my hp pavilion and I want to try 13.10. When I try to boot into the livecd, I get the purple ubuntu splash screen, then a blackscreen where some text flashes (to fast to see what it says) then it goes to a black screen and stays there. I know the installation disc is not the problem because I've successfully installed it on a different machine using the same disc. I've been trying to troubleshoot the issue for a while now and no luck. I have a radeon hd 8250 card. I know it's not much to go off of but any help would be greatly appreciated! Thanks!

    Read the article

  • No sound/audio after resuming from sleep

    - by hansvonaachen
    I've made a fresh UEFI install of Ubuntu 13.10 (64 bit) on a Lenovo Ideapad Z510 laptop with Intel i5 4200M processor. Ubuntu is the only OS installed on the computer, secure boot disabled. Everythings works fine (backlight issue fixed after editing rc.local file), the only minor trouble I have is resuming the laptop from "sleep" mode. If I close the lid and then wake the laptop opening it again, there is no audio/sound. I need to restart the computer (not even logging out helps). If I suspend the computer in a graphical way (not closing the lid): gearwheel in top right of the screen -- suspend and wake it up/turning on, audio works with no issues. Ideas how to fix this? Thanks!

    Read the article

  • Ask the Readers: How Do You Find Your Next Book?

    - by Jason Fitzpatrick
    It’s never been easier to find book reviews, recommendations, and comparisons; tools which are more necessary than ever thanks to the increasing number of new titles on the market. This week we want to hear all about your techniques for picking your next book. Whether you consult the New York Times best seller list, pore over Amazon book reviews, use a book suggestion engine, or just buy whatever the local book store has on the end-cap display that month, we want to hear about your system for finding new books. Sound off in the comments with your technique (bonus points for including links to any services or sites you use) and then check back on Friday for the What You Said roundup to see how your fellow readers fill their book bags. Secure Yourself by Using Two-Step Verification on These 16 Web Services How to Fix a Stuck Pixel on an LCD Monitor How to Factory Reset Your Android Phone or Tablet When It Won’t Boot

    Read the article

  • Win7 installation on VirtualBox

    - by Will
    I have Ubuntu 12.04 installed on my machine. I also installed Virtualbox so that I can run windows 7. I set my virtual box with 4 GB RAM and 25 GB virtual HDD and after I press Start, it doesnt boot from the windows dvd in the optical drive, but instead i get this error: Failed to open a session for the virtual machine win7. VT-x features locked or unavailable in MSR. (VERR_VMX_MSR_LOCKED_OR_DISABLED). Result Code: NS_ERROR_FAILURE (0x80004005) Component: Console Interface: IConsole {1968b7d3-e3bf-4ceb-99e0-cb7c913317bb} Do you have any idea what is it and how I could overcome this? Thank you!

    Read the article

  • Blank Screen on 12.04

    - by stupidwhiteguy
    Can hit Ctrl-Alt-F1 and login but no fixes work. Tried nomodeset and everything else appears to have upgraded but can't see anything. I really need this computer to work. It is an old Dell with 1.6 processor with old school monitor. I don't know why people are giving my question negative votes. If you know how to fix this, then please help me, as I have read and tried all the solutions that I've found. Just for the record reformatting is not fixing it, and I can't get a boot CD to load either. If you know how to use the blank screen fix tutorial, please explain cos I'm lost. Most people don't understand this stuff and an easy "how-to" fix would be nice.

    Read the article

  • Problems booting Ubuntu 10.10 with Nvdia GeForce 6600gt

    - by SlyrNemesis
    I am quite new to Ubuntu and I already stumbled upon a problem. I run Ubuntu 10.10 Maverick Meerkat now and Install went fine, when trying to boot the screen popped black and I faced this message "gpu lockup - switching to software fbcon." When setting the display to onboard VGA through BIOS Ubuntu has no problem at all, but when I switch back to my AGP card (which is a Nvidia GeForce 6600GT) I get that message again. I do not use VGA for that card I use my DVI cable for it. Does anyone have an answer for me to make this work? Thank you

    Read the article

  • Why do control keys (ctrl, shift, alt) not work sometimes?

    - by EricSchaefer
    Sometimes (about once a week) the control keys (ctrl, shift, alt) so not work anymore. They do work when I boot up, but after a while they stop working. Logging out and in again repairs it. What can cause something like that? Edit: It just happened again. Incidentally it happened right after vmware-player crashed just as the last time. Coincidence? Edit: It is a laptop keyboard (HP EliteBook 8730w) with german layout.

    Read the article

  • When trying running Ubuntu 12.10 off a usb drive, I encounter an error while prevent me from doing anything else

    - by Nil
    The details are that I used Universal USB Installer version 1.9.1.8 from pendrivelinux.com to install ubuntu 12.10 onto a 4gb pendrive as per instruction on Ubuntu's website. However, after I boot with drive I am met with the following message: "The system is running in low-graphics mode. Your screen, graphics card, and input device settings could not be detected correctly. You will need to configure these yourself." Pressing Ctrl Alt F1 doesn't allow me access and the options on the dialog box either send me through a loop returning me to the previous dialog or just leave me dead in the water. Pressing Ctrl Alt Del does however restart the computer if I am dead in the water, so ubuntu isn't COMPLETELY unresponsive... I feel I should mention that I'm trying to run this distribution on my netbook. I can't install it directly to the harddrive since I need my current Windows distribution for certain programs that don't quite agree with WINE yet.

    Read the article

  • Iomega Home Media Network Hard Drive 1TB Cloud Edition failed, data recovery?

    - by lonbon69
    I have a Iomega Home Media Network Drive Cloud Edition 1TB that started clicking and then displayed a failure LED code Power LED and Red LED. I removed the SATA drive and inserted in a 'All in 1 HDD Docking Station' and connected to laptop by USB - Laptop has Win 7 OS. The dock is seen as drive E but cannot access and says 0% data etc. The drive does spin up when I power the dock. Web searches say the drive has EXT3 file system and to use Ubuntu to access drive. I have now setup a dual boot laptop but still do not see the drive using ubuntu. Is there something else I need to do to get it recognised etc. I really would like to recover the data, any suggestions please?

    Read the article

  • Ubuntu VM cannot start after Kernel upgrade

    - by AAz
    Several Ubuntu 10.04 VMs were restarted after few months and began getting "Kernel Panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)" message. Restoring those VMs from backup (to the "paused" state) allows to boot normally. However restarting the VM again results in the mentioned error message. I suspect it's the updated kernel version (2.6.32-37-server, 2.6.32-38-server) that misbehave - another Ubuntu VM (that's used as template for those failing VMs) still has 2.6.32-24-server and reboots fine. We're using HyperV (2008R2) as the server host. Nothing were changed in it's configuration. Has anyone faced this issue, please advise the solution. Many Thanks in advance!

    Read the article

  • Ubuntu 11.10 USB 3.0 HDD

    - by Chazm
    I have a problem with my external HDD (WD My Book Essential 1TB) working on USB 3.0 port. I'm using dual boot setup with Windows 7 and Ubuntu 11.10, both 64 bit. While I'm running Windows and rebooting back to Windows everything works well. When I'm switchin to ubuntu everything works great as well. But after 1st reboot from ubuntu neither windows nor ubuntu mount the external drive. I have to reboot the device manually. I suspect that the problem is with unmounting the device on shutdown on ubuntu. The case concern only usb 3.0. When i plug the same device into usb 2 port the problem doesn't persist. Does any1 hit the same problem or have a clue what might goin wrong?

    Read the article

  • installing 12.04 failing

    - by Steve
    I just downloaded 12.04 burned it to a cd, and booted to into it on my last built computer. It loads a purple screen, then goes to a dos looking screen with a blinking cursor then loads the ubuntu loader. The lights go from red to white and finally they all turn red. This is when the entire screen goes to noise and just hangs. Seems like a hardware issue but I can successfully boot into a non genuine windows7 that I'm looking to replace. I'm not sure what to try, so any help would be appreciated. Thanks.

    Read the article

  • INstlling ubuntu

    - by Erich
    Am trying to install ubuntu 12.04 on a pentium 4 with a hard disk that's been totally wiped clean. Have made an iso image, burned it on a cd and it has been verified. Checked to see if separate files have been burned on cd and they have. When I boot to the disk I get the word unbuntu with some progress dots, 5 min later it goes to a red screen with the mouse arrow on screen. It has stayed in this condition for over half an hour now. Help? erich

    Read the article

  • Did I choose proper career path? [closed]

    - by Liston Catch
    I am a C# Junior. My company has it's own enterprise documents-flow system written, my job along with 10 other programmers is to write modules/add-ons for it. I am totally bored of this job, I dont like Microsoft's technologies stack (dont hate me here, just subjective), but it's plain boring, enterprise is boring (subjective again, everyone's tastes differ), days on this work last long and I am tired of it. In short - I dont like my job. In my spare time I am doing PHP-development and I totally like it. I am also doing web-design, so I am LAMP-kind of guy who loves his Ubuntu and does design aswell. I know that most programmers don't do design themselves, so some person is either all about design or all about coding, but I enjoy both and do both. I often get interesting sites orders, I love to make whole websites with all the design, I love the feeling of site completeness, I enjoy talking with customers. I like that PHP is simple and skill cap is lower than one of java, meaning I can become expert in it after some years. But C# (and J2EE also) pay more, and I am doing really good in C#. But I dont like it. I can go for J2EE, platform itself seems more fun to me rather than .NET, but EE development is still boring to me. But it seems higher payed, easier to find job (since PHP is too common for its easiness. But if you are expert in something it doesnt matter, right? Just a higher skillcap.) Question: I want to go on with freelance. I want to have an opportunity to start my own startup in web. Actually I have a browser-game already written by myself, it earns me around 500$ per month which I am really proud of since I am 21 only and still noob in coding. I want to find part-time PHP job. 3 days per week so I can get some stable income, I can work in team and learn from them, social factor matters aswell as ensurance and diversity. I also want my total income (freelance + part-time job + own startup maybe)to be not too much less than one I have working in EE development sector. Maximum of 25% lower, but not more. Is it all possible if I stick with web-development (LAMP + HTML/CSS/JS/Jquery/AJAX)? Or is it easier to reach my goals with EE development?

    Read the article

  • Ubuntu not saving files and settings when running from flash drive

    - by user81217
    How can I make Ubuntu run completely off of a flash drive? I have downloaded Ubuntu onto a 4gb flash drive but no changes I make are saved between sessions. I want to be able to run and save everything I do to the flash drive. I don't want it interfering with my hard drive at all. I just want to be able to plug my flash drive in the computer boot Ubuntu, and for it to save my changes. E.g. When I install Google Chrome, when I reboot it isn't there.

    Read the article

  • Access samba shares befor login

    - by everlearnin
    I installed Ubuntu 12.10 on an old Compaq C300. I want to use it to share my movies over lan so that the rest of my family can watch without hi-jacking my pc. I installed samba and shared the Public folder under the Home folder of my user account. But I can only access this folder from my Win 7 pc when I am logged in. If I log out or restart without logging in then I cannot access the shared folder. I am used to the Windows service that starts at boot making shared files available over the network before the user has logged in. How can I accomplish this in Ubuntu?

    Read the article

  • Cannot get grub menu to timeout (or go away)

    - by Eric
    I am running Ubuntu 12.04. I cannot for the life of me get the grub menu (with options) to go away. I would like it to auto-boot into the first option. I've edited /etc/default/grub so that it looks like the following: GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" GRUB_CMDLINE_LINUX="" After this, I ran sudo update-grub. Then I realized that I had grub 2, so I ran sudo update-grub2 (both make it look like they create the grub.cfg file successfully. I restart my computer and it goes back to the grub menu and just sits there until I make a choice. This is not desirable if the power goes out... :-) I also tried reinstalling grub using sudo grub-install /dev/sda - also unsuccessful

    Read the article

  • kernel panic - not syncing vfs unable to mount root fs on unknown-block(1,0) on live cd

    - by sobox studio
    I'm trying to install ubunutu 12.04 on my 2005 PowerMac G5. I've burnt ubuntu-12.04-desktop-powerpc.iso. I try to boot from the live cd. I hit 'enter' to load the live environment. The kernel seems to be fine but then I get this: kernel panic - not syncing vfs unable to mount root fs on unknown-block(1,0) Then it says rebooting in 180........ and hangs. I can't do anything. Any help would be appreciated. Thank you.

    Read the article

  • No video signal after install

    - by tW4r
    Today I tried to install Ubuntu 12.10 to my machine, but all the time I encountered the same problem, I successfully boot from Ubuntu 12.04 DVD, and a purple background comes up with accessibility and keyboard icons at the bottom of the screen, then when you wait a while a monitor text comes up "No signal" (Keep in mind that this signal is only shown when there's cable in the monitor HDMI plug), and nothing happens, a little later disk drive stops flashing meaning that disk finished being read. Even if you reset the computer you still get no signal, you have to turn the power of and on again, and plug HDMI out and put it in again. My info: Graphics card: ATI/AMD Radeon HD 4850 Connection to monitor: HDMI Monitor: Samsung SyncMaster T220HD

    Read the article

  • PCI function number for SATA AHCI controller

    - by Look Alterno
    I'm debugging a second stage boot loader for a PC with SATA AHCI controller. I'm able to enumerate the PCI bus and find the hard disk. So far, so good. Now, lspci in my notebook (Dell Inspiron 1525) show me: -[0000:00]-+-1f.0 Intel Corporation 82801HEM (ICH8M) LPC Interface Controller +-1f.1 Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller +-1f.2 Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller \-1f.3 Intel Corporation 82801H (ICH8 Family) SMBus Controller My question: Is SATA AHCI Controller always function 2 in any PC? If not, how I found? I don't pretend to be general; booting my notebook will be good enough, without compromise further refinements.

    Read the article

  • lightdm.conf content erased, now stuck in low graphics mode

    - by user79318
    This evening I was attempting to disable the guest account and something went awry. Currently on boot Ubuntu enters low graphics mode. No specific error report. What did I do? Before this error occurred I added a line of code in lightdm.conf to disable the guest account. I think I may have accidentally erased the contents of lightdm.conf. Not entirely sure. I troubleshooted for the past hour using various suggestions from other Questions to no avail.

    Read the article

  • can't see second hard drive

    - by Todd K
    I had XP Pro installed, and then I installed 12.04 dual boot. System has 2 hard drives, c: (as in windows) is primarily OS stuff, and then E: is data/personal documents. XP can still see both drives as normal after the ubuntu install, but ubuntu can only see the windows C: drive. How can I access the second drive? I can't see any trace of it, using the little *nix know-how I have, which isn't much...any help is great! Thanks!

    Read the article

  • cannot unlock login screen 14.04

    - by LittleNooby
    When my computer boots, entering the correct password won't start my session. I found out the problem is /home/user/.Xauthority ownership. root owns this folder and giving the ownership to the user will solve the problem... for a while. I don't know how or when, but the ownership will go back to root pretty often; It can happen just after one boot or ten. Is there a definitive solution to this problem?

    Read the article

< Previous Page | 327 328 329 330 331 332 333 334 335 336 337 338  | Next Page >