strong parameters - Page 331

Unexpected advantage of Engineered Systems

- by user12244672

It's not surprising that Engineered Systems accelerate the debugging and resolution of customer issues. But what has surprised me is just how much faster issue resolution is with Engineered Systems such as SPARC SuperCluster. These are powerful, complex, systems used by customers wanting extreme database performance, app performance, and cost saving server consolidation. A SPARC SuperCluster consists or 2 or 4 powerful T4-4 compute nodes, 3 or 6 extreme performance Exadata Storage Cells, a ZFS Storage Appliance 7320 for general purpose storage, and ultra fast Infiniband switches. Each with its own firmware. It runs Solaris 11, Solaris 10, 11gR2, LDoms virtualization, and Zones virtualization on the T4-4 compute nodes, a modified version of Solaris 11 in the ZFS Storage Appliance, a modified and highly tuned version of Oracle Linux running Exadata software on the Storage Cells, another Linux derivative in the Infiniband switches, etc. It has an Infiniband data network between the components, a 10Gb data network to the outside world, and a 1Gb management network. And customers can run whatever middleware and apps they want on it, clustered in whatever way they want. In one word, powerful. In another, complex. The system is highly Engineered. But it's designed to run general purpose applications. That is, the physical components, configuration, cabling, virtualization technologies, switches, firmware, Operating System versions, network protocols, tunables, etc. are all preset for optimum performance and robustness. That improves the customer experience as what the customer runs leverages our technical know-how and best practices and is what we've tested intensely within Oracle. It should also make debugging easier by fixing a large number of variables which would otherwise be in play if a customer or Systems Integrator had assembled such a complex system themselves from the constituent components. For example, there's myriad network protocols which could be used with Infiniband. Myriad ways the components could be interconnected, myriad tunable settings, etc. But what has really surprised me - and I've been working in this area for 15 years now - is just how much easier and faster Engineered Systems have made debugging and issue resolution. All those error opportunities for sub-optimal cabling, unusual network protocols, sub-optimal deployment of virtualization technologies, issues with 3rd party storage, issues with 3rd party multi-pathing products, etc., are simply taken out of the equation. All those error opportunities for making an issue unique to a particular set-up, the "why aren't we seeing this on any other system ?" type questions, the doubts, just go away when we or a customer discover an issue on an Engineered System. It enables a really honed response, getting to the root cause much, much faster than would otherwise be the case. Here's a couple of examples from the last month, one found in-house by my team, one found by a customer: Example 1: We found a node eviction issue running 11gR2 with Solaris 11 SRU 12 under extreme load on what we call our ExaLego test system (mimics an Exadata / SuperCluster 11gR2 Exadata Storage Cell set-up). We quickly established that an enhancement in SRU12 enabled an 11gR2 process to query Infiniband's Subnet Manager, replacing a fallback mechanism it had used previously. Under abnormally heavy load, the query could return results which were misinterpreted resulting in node eviction. In several daily joint debugging sessions between the Solaris, Infiniband, and 11gR2 teams, the issue was fully root caused, evaluated, and a fix agreed upon. That fix went back into all Solaris releases the following Monday. From initial issue discovery to the fix being put back into all Solaris releases was just 10 days. Example 2: A customer reported sporadic performance degradation. The reasons were unclear and the information sparse. The SPARC SuperCluster Engineered Systems support teams which comprises both SPARC/Solaris and Database/Exadata experts worked to root cause the issue. A number of contributing factors were discovered, including tunable parameters. An intense collaborative investigation between the engineering teams identified the root cause to a CPU bound networking thread which was being starved of CPU cycles under extreme load. Workarounds were identified. Modifications have been put back into 11gR2 to alleviate the issue and a development project already underway within Solaris has been sped up to provide the final resolution on the Solaris side. The fixed SPARC SuperCluster configuration greatly aided issue reproduction and dramatically sped up root cause analysis, allowing the correct workarounds and fixes to be identified, prioritized, and implemented. The customer is now extremely happy with performance and robustness. Since the configuration is common to other customers, the lessons learned are being proactively rolled out to other customers and incorporated into the installation procedures for future customers. This effectively acts as a turbo-boost to performance and reliability for all SPARC SuperCluster customers. If this had occurred in a "home grown" system of this complexity, I expect it would have taken at least 6 months to get to the bottom of the issue. But because it was an Engineered System, known, understood, and qualified by both the Solaris and Database teams, we were able to collaborate closely to identify cause and effect and expedite a solution for the customer. That is a key advantage of Engineered Systems which should not be underestimated. Indeed, the initial issue mitigation on the Database side followed by final fix on the Solaris side, highlights the high degree of collaboration and excellent teamwork between the Oracle engineering teams. It's a compelling advantage of the integrated Oracle Red Stack in general and Engineered Systems in particular.

Read the article

jQuery with SharePoint solutions

- by KunaalKapoor

For me jQuery is the 'Plan-B' for everything.And most of my projects include the use of jQuery for something or the other, so I decided to write a small note on what works best while using jQuery along with SharePoint.I prefer to use the jQuery JavaScript library, which is far more robust, easier to use, and allows for plugins. Follow the steps below to add jQuery to your master page. For office 365, the prefered location to add jQuery files is the "Site Asserts" library.Deployment Best PracticesThey are only as good as the context it’s being referenced. In other words, take into account your world before applying it.Script your deployment options. Folder in SPD. Use the file system. Make external references. The JQuery library is on the Microsoft Ajax Content Delivery Network. You may even choose to publish to and from the document library. (pros and cons to this approach)Reference options when referencing the script.ScriptLink will make sure it’s loaded at the top of the page and only loaded once. You need Visual Studio or SPDContent Editor Web Part (CEWP). Drop it on the page and it’s there. Easy but dangerousCustom Actions. Great for global deployments of JQuery. Loads it on every page. It also works in Sandbox installations.Deployment Maintenance Dont’sDon’t add scripts directly to your Master Page. That’s way too much effort because the pages are hard to maintain.Don’t add scripts directly to the CEWP. Use a content link instead. That will allow for reuse. If you or someone deletes the CEWP you won’t lose code in the web partSecurity. Any scripts run with the same privileges of the current user. In other words, you can’t get in trouble.Development Best PracticesDon’t abuse the DOM. There are better options to load the DOM without hitting it 1,000 times.User other performance boosters.Try other libraries. Try some custom codeAvoid String conversionMinify your filesUse CAML to reduce number of returns rowsOnly update your JQuery library AFTER RIGOROUS REGRESSION TESTINGCRUD operations can come with some funSP Services wraps SharePoint’s web services for executionThe Bing SDK is pretty easy to use. You can add it to your page with a script, put it into a content editor web part and connect it from the address parameters in a list.Steps:1. Go to jquery.com and download the latest jQuery library to your desktop. You want to get the compressed production version, not the development version.2. Open SharePoint Designer (SPD) and connect to the root level of your site's site collection.In SPD, open the "Style Library" folder. Create a folder named "Scripts" inside of the Style Library. Drag the jQuery library JavaScript file from your desktop into the Scripts folder.In the Scripts folder, create a new JavaScript file and name it (e.g. "actions.js").3. If you are using visual studio add a folder for js, you can create a new folder at the root level or if you prefer more cleaner solutions like me, you can use the layouts folder which cleans out on deactivation/uninstall.4. Within the <head> tag of the master page, add a script reference to the jQuery library just above the content place holder named "PlaceHolderAdditonalPageHead" (and above your custom CSS references, if applicable) as follows:<script src="/Style%20Library/Scripts/{jquery library file}.js" type="text/javascript"></script>Immediately after the jQuery library reference add a script reference to your custom scripts file as follows:<script src="/Style%20Library/Scripts/actions.js" type="text/javascript"></script>Inside your script tag, you can test if jQuery is already defined and if not, then add it to the page.<script type='text/javascript'> if (typeof jQuery == 'undefined') document.write('<scr'+'ipt type="text/javascript" src="http://code.jquery.com/jquery-1.6.1.min.js"></sc'+'ript>');</script>For the inquisitive few... Read on if you'd like :)Why jQuery on SharePoiny is AwesomeIt’s all about that visual wow factor. You can get past that, “But it looks like SharePoint” Take a long list view and put it into JQuery with pagination, etc and you are the hero. It’s also about new controls you get with JQuery that you couldn’t do before.Why jQuery with SharePoint should be AwfulAlthough it’s fairly easy to get jQuery up and running. Copy/Paste can cause a problem. If you don’t understand what it’s doing in the Client Object Model and the Document Object Model then it will do things on your site that were completely unexpected. Many blogs will note workarounds they employed on their sites. Why it’s not working: Debugging “sucks”.You need to develop small blocks of functionality, Test it by putting in some alerts and console.log. Set breakpoints and monitor the DOM via Firebug and some IE development toolsPerformance - It happens all the time. But you should look at the tradeoffs. More time may give you more functionality.Consistency - ”But it works fine on my computer. So test on many browsers. Take into account client resourcesHarm the Farm - You need to code wisely and negatively test. Don’t be the cause of a DoS attack that’s really JQuery asking for a resource over and over and over again. So code wisely. Do negative testing. Monitor Server Resources.They also did a demo where JQuery did an endless loop to pull data from a list. It’s a poor decision but also an easy mistake. They spiked their server resources within a couple seconds and had to shut down the call before it brought it down.ConclusionJQuery is now another tool in your tool kit. You don’t have to use it. Use it where it makes sense and where it helps you get your job done.Don’t abuse it, you will pay for it laterIt will add to page bloat so take that into accountIt can slow your performance

Read the article

Oracle NoSQL Database Exceeds 1 Million Mixed YCSB Ops/Sec

- by Charles Lamb

We ran a set of YCSB performance tests on Oracle NoSQL Database using SSD cards and Intel Xeon E5-2690 CPUs with the goal of achieving 1M mixed ops/sec on a 95% read / 5% update workload. We used the standard YCSB parameters: 13 byte keys and 1KB data size (1,102 bytes after serialization). The maximum database size was 2 billion records, or approximately 2 TB of data. We sized the shards to ensure that this was not an "in-memory" test (i.e. the data portion of the B-Trees did not fit into memory). All updates were durable and used the "simple majority" replica ack policy, effectively 'committing to the network'. All read operations used the Consistency.NONE_REQUIRED parameter allowing reads to be performed on any replica. In the past we have achieved 100K ops/sec using SSD cards on a single shard cluster (replication factor 3) so for this test we used 10 shards on 15 Storage Nodes with each SN carrying 2 Rep Nodes and each RN assigned to its own SSD card. After correcting a scaling problem in YCSB, we blew past the 1M ops/sec mark with 8 shards and proceeded to hit 1.2M ops/sec with 10 shards. Hardware Configuration We used 15 servers, each configured with two 335 GB SSD cards. We did not have homogeneous CPUs across all 15 servers available to us so 12 of the 15 were Xeon E5-2690, 2.9 GHz, 2 sockets, 32 threads, 193 GB RAM, and the other 3 were Xeon E5-2680, 2.7 GHz, 2 sockets, 32 threads, 193 GB RAM. There might have been some upside in having all 15 machines configured with the faster CPU, but since CPU was not the limiting factor we don't believe the improvement would be significant. The client machines were Xeon X5670, 2.93 GHz, 2 sockets, 24 threads, 96 GB RAM. Although the clients had 96 GB of RAM, neither the NoSQL Database or YCSB clients require anywhere near that amount of memory and the test could have just easily been run with much less. Networking was all 10GigE. YCSB Scaling Problem We made three modifications to the YCSB benchmark. The first was to allow the test to accommodate more than 2 billion records (effectively int's vs long's). To keep the key size constant, we changed the code to use base 32 for the user ids. The second change involved to the way we run the YCSB client in order to make the test itself horizontally scalable.The basic problem has to do with the way the YCSB test creates its Zipfian distribution of keys which is intended to model "real" loads by generating clusters of key collisions. Unfortunately, the percentage of collisions on the most contentious keys remains the same even as the number of keys in the database increases. As we scale up the load, the number of collisions on those keys increases as well, eventually exceeding the capacity of the single server used for a given key.This is not a workload that is realistic or amenable to horizontal scaling. YCSB does provide alternate key distribution algorithms so this is not a shortcoming of YCSB in general. We decided that a better model would be for the key collisions to be limited to a given YCSB client process. That way, as additional YCSB client processes (i.e. additional load) are added, they each maintain the same number of collisions they encounter themselves, but do not increase the number of collisions on a single key in the entire store. We added client processes proportionally to the number of records in the database (and therefore the number of shards). This change to the use of YCSB better models a use case where new groups of users are likely to access either just their own entries, or entries within their own subgroups, rather than all users showing the same interest in a single global collection of keys. If an application finds every user having the same likelihood of wanting to modify a single global key, that application has no real hope of getting horizontal scaling. Finally, we used read/modify/write (also known as "Compare And Set") style updates during the mixed phase. This uses versioned operations to make sure that no updates are lost. This mode of operation provides better application behavior than the way we have typically run YCSB in the past, and is only practical at scale because we eliminated the shared key collision hotspots.It is also a more realistic testing scenario. To reiterate, all updates used a simple majority replica ack policy making them durable. Scalability Results In the table below, the "KVS Size" column is the number of records with the number of shards and the replication factor. Hence, the first row indicates 400m total records in the NoSQL Database (KV Store), 2 shards, and a replication factor of 3. The "Clients" column indicates the number of YCSB client processes. "Threads" is the number of threads per process with the total number of threads. Hence, 90 threads per YCSB process for a total of 360 threads. The client processes were distributed across 10 client machines. Shards KVS Size Clients Mixed (records) Threads OverallThroughput(ops/sec) Read Latencyav/95%/99%(ms) Write Latencyav/95%/99%(ms) 2 400m(2x3) 4 90(360) 302,152 0.76/1/3 3.08/8/35 4 800m(4x3) 8 90(720) 558,569 0.79/1/4 3.82/16/45 8 1600m(8x3) 16 90(1440) 1,028,868 0.85/2/5 4.29/21/51 10 2000m(10x3) 20 90(1800) 1,244,550 0.88/2/6 4.47/23/53

Read the article

How do you test an ICF based connector using Connector Facade Standalone?

- by Shashidhar Malyala

Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} The following code helps in writing a standalone java program to test an ICF based connector. The sample code in this example takes into account an ICF based flatfile connector. It is possible to test various operations like create, update, delete, search etc... It is also possible to set values to the connector configuration parameters, add/remove attributes and their values. public class FlatFile { private static final java.lang.String BUNDLE_NAME = "<PACKAGE_NAME>"; //Ex: org.info.icf.flatfile private static final java.lang.String BUNDLE_VERSION = "1.0.0"; private static final java.lang.String CONNECTOR_NAME = "org.info.icf.flatfile.FlatFileConnector"; // Name of connector class i.e. the class implemting the connector SPI operations public ConnectorFacade getFacade() throws IOException { ConnectorInfoManagerFactory fact = ConnectorInfoManagerFactory .getInstance(); File bundleDirectory = new File("<BUNDLE_LOCATION>"); //Ex: /usr/oracle/connector_bundles/ URL url = IOUtil.makeURL(bundleDirectory, "org.info.icf.flatfile-1.0.0.jar"); ConnectorInfoManager manager = fact.getLocalManager(url); ConnectorKey key = new ConnectorKey(BUNDLE_NAME, BUNDLE_VERSION, CONNECTOR_NAME); ConnectorInfo info = manager.findConnectorInfo(key); // From the ConnectorInfo object, create the default APIConfiguration. APIConfiguration apiConfig = info.createDefaultAPIConfiguration(); // From the default APIConfiguration, retrieve the // ConfigurationProperties. ConfigurationProperties properties = apiConfig .getConfigurationProperties(); // Print out what the properties are (not necessary) List propertyNames = properties.getPropertyNames(); for (String propName : propertyNames) { ConfigurationProperty prop = properties.getProperty(propName); System.out.println("Property Name: " + prop.getName() + "\tProperty Type: " + prop.getType()); } properties .setPropertyValue("fileLocation", "/usr/oracle/accounts.csv"); // Set all of the ConfigurationProperties needed by the connector. // properties.setPropertyValue("host", FOOBAR_HOST); // properties.setPropertyValue("adminName", FOOBAR_ADMIN); // properties.setPropertyValue("adminPassword", FOOBAR_PASSWORD); // properties.setPropertyValue("useSSL", false); // Use the ConnectorFacadeFactory's newInstance() method to get a new // connector. ConnectorFacade connFacade = ConnectorFacadeFactory.getInstance() .newInstance(apiConfig); // Make sure we have set up the Configuration properly connFacade.validate(); return connFacade; } public static void main(String[] args) throws IOException { FlatFile file = new FlatFile(); ConnectorFacade cfac = file.getFacade(); Set attrSet = new HashSet(); attrSet.add(AttributeBuilder.build(Name.NAME, "Test01")); attrSet.add(AttributeBuilder.build("FIRST_NAME", "Test_First")); attrSet.add(AttributeBuilder.build("LAST_NAME", "Test_Last")); //Create Uid uid = cfac.create(ObjectClass.ACCOUNT, attrSet, null); //Delete Uid uidP = new Uid("Test01"); cfac.delete(ObjectClass.ACCOUNT, uidP, null); } }

Read the article

Data Source Security Part 5

- by Steve Felts

If you read through the first four parts of this series on data source security, you should be an expert on this focus area. There is one more small topic to cover related to WebLogic Resource permissions. After that comes the test, I mean example, to see with a real set of configuration parameters what the results are with some concrete values. WebLogic Resource Permissions All of the discussion so far has been about database credentials that are (eventually) used on the database side. WLS has resource credentials to control what WLS users are allowed to access JDBC resources. These can be defined on the Policies tab on the Security tab associated with the data source. There are four permissions: “reserve” (get a new connection), “admin”, “shrink”, and reset (plus the all-inclusive “ALL”); we will focus on “reserve” here because we are talking about getting connections. By default, JDBC resource permissions are completely open – anyone can do anything. As soon as you add one policy for a permission, then all other users are restricted. For example, if I add a policy so that “weblogic” can reserve a connection, then all other users will fail to reserve connections unless they are also explicitly added. The validation is done for WLS user credentials only, not database user credentials. Configuration of resources in general is described at “Create policies for resource instances” http://docs.oracle.com/cd/E24329_01/apirefs.1211/e24401/taskhelp/security/CreatePoliciesForResourceInstances.html. This feature can be very useful to restrict what code and users can get to your database. There are the three use cases: API Use database credentials User for permission checking getConnection() True or false Current WLS user getConnection(user,password) False User/password from API getConnection(user,password) True Current WLS user If a simple getConnection() is used or database credentials are enabled, the current user that is authenticated to the WLS system is checked. If database credentials are not enabled, then the user and password on the API are used. Example The following is an actual example of the interactions between identity-based-connection-pooling-enabled, oracle-proxy-session, and use-database-credentials. On the database side, the following objects are configured.- Database users scott; jdbcqa; jdbcqa3- Permission for proxy: alter user jdbcqa3 grant connect through jdbcqa;- Permission for proxy: alter user jdbcqa grant connect through jdbcqa; The following WebLogic Data Source objects are configured.- Users weblogic, wluser- Credential mapping “weblogic” to “scott”- Credential mapping "wluser" to "jdbcqa3"- Data source descriptor configured with user “jdbcqa”- All tests are run with Set Client ID set to true (more about that below).- All tests are run with oracle-proxy-session set to false (more about that below). The test program:- Runs in servlet- Authenticates to WLS as user “weblogic” Use DB Credentials Identity based getConnection(scott,***) getConnection(weblogic,***) getConnection(jdbcqa3,***) getConnection() true true Identity scottClient weblogicProxy null weblogic fails - not a db user User jdbcqa3Client weblogicProxy null Default user jdbcqaClient weblogicProxy null false true scott fails - not a WLS user User scottClient scottProxy null jdbcqa3 fails - not a WLS user User scottClient scottProxy null true false Proxy for scott fails weblogic fails - not a db user User jdbcqa3Client weblogicProxy jdbcqa Default user jdbcqaClient weblogicProxy null false false scott fails - not a WLS user Default user jdbcqaClient scottProxy null jdbcqa3 fails - not a WLS user Default user jdbcqaClient scottProxy null If Set Client ID is set to false, all cases would have Client set to null. If this was not an Oracle thin driver, the one case with the non-null Proxy in the above table would throw an exception because proxy session is only supported, implicitly or explicitly, with the Oracle thin driver. When oracle-proxy-session is set to true, the only cases that will pass (with a proxy of "jdbcqa") are the following.1. Setting use-database-credentials to true and doing getConnection(jdbcqa3,…) or getConnection().2. Setting use-database-credentials to false and doing getConnection(wluser, …) or getConnection(). Summary There are many options to choose from for data source security. Considerations include the number and volatility of WLS and Database users, the granularity of data access, the depth of the security identity (property on the connection or a real user), performance, coordination of various components in the software stack, and driver capabilities. Now that you have the big picture (remember that table in part 1), you can make a more informed choice.

Read the article

Web Services Example - Part 2: Programmatic

- by Denis T

In this edition of the ADF Mobile blog we'll tackle part 2 of our Web Service examples. In this posting we'll take a look at using a SOAP Web Service but calling it programmatically in code and parsing the return into a bean. Getting the sample code: Just click here to download a zip of the entire project. You can unzip it and load it into JDeveloper and deploy it either to iOS or Android. Please follow the previous blog posts if you need help getting JDeveloper or ADF Mobile installed. Note: This is a different workspace than WS-Part1 Defining our Web Service: Just like our first installment, we are using the same public weather forecast web service provided free by CDYNE Corporation. Sometimes this service goes down so please ensure you know it's up before reporting this example isn't working. We're going to concentrate on the same two web service methods, GetCityForecastByZIP and GetWeatherInformation. Defing the Application: The application setup is identical to the Weather1 version. There are some improvements to the data that is displayed as part of this example though. Now we are able to show the associated image along with each forecast line when using the Forecast By Zip feature. We've also added the temperature Hi/Low values into the UI. Summary of Fundamental Changes In This Application The most fundamental change is that we're binding the UI to the Bean Data Controls instead of directly to the Web Service Data Controls. This gives us much more flexibility to control the shape of the data and allows us to do caching of the data outside of the Web Service. This way if your application is, say offline, your bean could still populate with data from a local cache and still show you some UI as opposed to completely failing because you don't have any connectivity. In general we promote this type of programming technique with ADF Mobile to insulate your application from any issues with network connectivity. What's different with this example? We have setup the Web Service DC the same way but now we have managed beans to process the data. The following classes define the "Model" of our application: CityInformation-CityForecast-Forecast, WeatherInformation-WeatherDescription. We use WeatherBean for UI interaction to the model layer. If you look through this example, we don't really do that much with the java code except use it to grab the image URL from the weather description. In a more realistic example, you might be using some JDBC classes to persist the data to a local database. To have a good architecture it is always good to keep your model and UI layers separate. This gets muddied if you start to use bindings on a page invoked from Java code and this java code starts to become your "model" layer. Since bindings are page specific, your model layer starts to become entwined with your UI. Not good! To help with this, we've added some utility functions that let you invoke DC methods without having a binding and thus execute methods from your "model" layer without requiring a binding in your page definition. We do this with the invokeDataControlMethod of the AdfmfJavaUtilities class. An example of this method call is available in line 95 of WeatherInformation.java and line 93 of CityInformation.Java. What's a GenericType? Because Web Service Data Controls (and also URL Data Controls AKA REST) use generic name/value pairs to define their structure and don't have strongly typed objects, these are actually stored internally as GenericType objects. The GenericType class is simply a property map of name/value pairs that can be hierarchical. There are methods like getAttribute where you supply the index of the attribute or it's string property name. Why is this important to know? Because invokeDataControlMethod returns GenericType objects and developers either need to parse these GenericType objects themselves or use one of our helper functions. GenericTypeBeanSerializationHelper This class does exactly what it's name implies. It's a helper class for developers to aid in serialization of GenericTypes to/from java objects. This is extremely handy if you have a large GenericType object with many attributes (or you're just lazy like me!) and you just want to parse it out into a real java object you can use more easily. Here you would use the fromGenericType method. This method takes the class of the Java object you wish to return and the GenericType as parameters. The method then parses through each attribute in the GenericType and uses reflection to set that same attribute in the Java class. Then the method returns that new object of the class you specified. This is obviously very handy to avoid a lot of shuffling code between GenericType and your own Java classes. The reverse method, toGenericType is also available when you want to go the other way. In this case you supply the string that represents the package location in the DataControl definition (Example: "MyDC.myParams.MyCollection") and then pass in the Java object you have that holds the data and a GenericType is returned to you. Again, it will use reflection to calculate the attributes that match between the java class and the GenericType and call the getters/setters on those. Issues and Possible Improvements: In the next installment we'll show you how to make your web service calls asynchronously so your UI will fill dynamically when the service call returns but in the meantime you show the data you have locally in your bean fed from some local cache. This gives your users instant delivery of some data while you fetch other data in the background.

Read the article

Migrating Virtual Iron guest to Oracle VM 3.x

- by scoter

As stated on the official site, Oracle in 2009, acquired a provider of server virtualization management software named Virtual Iron; you can find all the acquisition details at this link. Into the FAQ on the official site you can also view that, for the future, Oracle plans to fully integrate Virtual Iron technology into Oracle VM products, and any enhancements will be delivered as a part of the combined solution; this is what is going on with Oracle VM 3.x. So, customers started asking us to migrate Virtual Iron guests to Oracle VM. IMPORTANT: This procedure needs a dedicated OVM-Server with no-guests running on top; be careful while execute this procedure on production environments. In these little steps you will find how-to migrate, as fast as possible, your guests between VI ( Virtual Iron ) and Oracle VM; keep in mind that OracleVM has a built-in P2V utility ( Official Documentation ) that you can use to migrate guests between VI and Oracle VM. Concepts: VI repositories. On VI we have the same "repository" concept as in Oracle VM; the difference between these two products is that VI use a raw-lun as repository ( instead of using ocfs2 and its capabilities, like ref-links ). The VI "raw-lun" repository, with a pure operating-system perspective, may be presented as in this picture: Infact on this "raw-lun" VI create an LVM2 volume-group. The VI "raw-lun" repository, with an hypervisor perspective, may be presented as in this picture: So, the relationships are: LVM2-Volume-Group <-> VI Repository LVM2-Logical-Volume <-> VI guest virtual-disk The first step is to present the VI repository ( raw-lun ) to your dedicated OVM-Server. Prepare dedicated OVM-Server On the OVM-Server ( OVS ) you need to discover new lun and, after that, discover volume-group and logical-volumes containted in VI repository; due to default OVS configuration you need to edit lvm2 configuration file: /etc/lvm/lvm.conf # By default for OVS we restrict every block device: # filter = [ "r/.*/" ] and comment the line starting with "filter" as above. Now you have to discover the raw-lun presented and, next, activate volume-group and logical-volumes: #!/bin/bash for HOST in `ls /sys/class/scsi_host`;do echo '- - -' > /sys/class/scsi_host/$HOST/scan; done CPATH=`pwd` cd /dev for DEVICE in `ls sd[a-z] sd?[a-z]`;do echo '1' > /sys/block/$DEVICE/device/rescan; done cd $CPATH cd /dev/mapper for PARTITION in `ls *[a-z] *?[a-z]`;do partprobe /dev/mapper/$PARTITION; done cd $CPATH vgchange -a yAfter that you will see a new device:[root@ovs01 ~]# cd /dev/6000F4B00000000000210135bef64994[root@ovs01 6000F4B00000000000210135bef64994]# ls -l 6000F4B0000000000061013* lrwxrwxrwx 1 root root 77 Oct 29 10:50 6000F4B00000000000610135c3a0b8cb -> /dev/mapper/6000F4B00000000000210135bef64994-6000F4B00000000000610135c3a0b8cb By your OVM-Manager create a guest server with the same definition as on VI:same core number as VI source guestsame memory as VI source guestsame number of disks as VI source guest ( you can create OVS virtual disk with a small size of 1GB because the "clone" will, eventually, extend the size of your new virtual disks )Summarizing:source-virtual-disk path ( VI ):/dev/mapper/6000F4B00000000000210135bef64994-6000F4B00000000000610135c3a0b8cbdest-virtual-disk path ( OVS ):/OVS/Repositories/0004fb00000300006cfeb81c12f12f00/VirtualDisks/0004fb000012000055e0fc4c5c8a35ee.img ** ** = to identify your virtual disk you have verify its name under the "vm.cfg" file of your new guest.Clone VI virtual-disk to OVS virtual-diskdd if=/dev/mapper/6000F4B00000000000210135bef64994-6000F4B00000000000610135c3a0b8cb of=/OVS/Repositories/0004fb00000300006cfeb81c12f12f00/VirtualDisks/0004fb000012000055e0fc4c5c8a35ee.img Clean unsupported parameters and changes on OVS.1. Restore original /etc/lvm/lvm.conf # By default for OVS we restrict every block device: filter = [ "r/.*/" ] and uncomment the line starting with "filter" as above.2. Force-stop lvm2-monitor service # service lvm2-monitor force-stop 3. Restore original /etc/lvm directories ( archive, backup and cache ) # cd /etc/lvm # rm -fr archive backup cache; mkdir archive backup cache4. Reboot OVSRefresh OVS repository and start your guest.By OracleVM Manager refresh your repository:By OracleVM Manager start your "migrated" guest: Comments and corrections are welcome. Simon COTER

Read the article

OBIA on Teradata - Part 1 Loader and Monitoring

- by Mohan Ramanuja

Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} The out-of-the-box (OOB) OBIA Informatica mappings come with TPump loader. TPUMP FASTLOAD TPump does not lock the table. FastLoad applies exclusive lock on the table. The table that TPump is loading can have data. The table that FastLoad is loading needs to be empty. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} TPump is not efficient with lookups. FastLoad is more efficient in the absence of lookups. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} The out-of the box Informatica mappings come with TPump loader. There is chance for bottleneck in writer thread The out-of the box tables in Teradata supplied with OBAW features all Dimension and Fact tables using ROW_WID as the key for primary index. Also, all staging tables use integration_id as the key for primary index. This reduces skewing of data across Teradata AMPs.You can use an SQL statement similar to the following to determine if data for a given table is distributed evenly across all AMP vprocs. The SQL statement displays the AMP with the most used through the AMP with the least-used space, investigating data distribution in the Message table in database RST.SELECT vproc,CurrentPermFROM DBC.TableSizeWHERE Databasename = ‘PRJ_CRM_STGC’AND Tablename = ‘w_party_per_d’ORDER BY 2 descIf you suspect distribution problems (skewing) among AMPS, the following is a sample of what you might enter for a three-column PI:SELECT HASHAMP (HASHBUCKET (HASHROW (col_x, col_y, col_z))), count (*)FROM hash15GROUP BY 1ORDER BY 2 desc; ETL Error Monitoring Error Table – These are tables that start with ET. Location and name can be specified in Informatica session as well as the loader connection.Loader Log – Loader log is available in the Informatica server under the session log folder. These give feedback on the loader parameters such as Packing Factor to use. These however need to be monitored in the production environment. The recommendations made in one environment may not be used in another environment.Log Table – These are tables that start with TL. These are sparse on information.Bad File – This is the Informatica file generated in case there is data quality issues

Read the article

Developing Schema Compare for Oracle (Part 4): Script Configuration

- by Simon Cooper

If you've had a chance to play around with the Schema Compare for Oracle beta, you may have come across this screen in the synchronization wizard: This screen is one of the few screens that, along with the project configuration form, doesn't come from SQL Compare. This screen was designed to solve a couple of issues that, although aren't specific to Oracle, are much more of a problem than on SQL Server: Datatype conversions and NOT NULL columns. 1. Datatype conversions SQL Server is generally quite forgiving when it comes to datatype conversions using ALTER TABLE. For example, you can convert from a VARCHAR to INT using ALTER TABLE as long as all the character values are parsable as integers. Oracle, on the other hand, only allows ALTER TABLE conversions that don't change the internal data format. Essentially, every change that requires an actual datatype conversion has to be done using a rebuild with a conversion function. That's OK, as we can simply hard-code the various conversion functions for the valid datatype conversions and insert those into the rebuild SELECT list. However, as there always is with Oracle, there's a catch. Have a look at the NUMTODSINTERVAL function. As well as specifying the value (or column) to convert, you have to specify an interval_unit, which tells oracle how to interpret the input number. We can't hardcode a default for this parameter, as it is entirely dependent on the user's data context! So, in order to convert NUMBER to INTERVAL DAY TO SECOND/INTERVAL YEAR TO MONTH, we need to have feedback from the user as to what to put in this parameter while we're generating the sync script - this requires a new step in the engine action/script generation to insert these values into the script, as well as new UI to allow the user to specify these values in a sensible fashion. In implementing the engine and UI infrastructure to allow this it made much more sense to implement it for any rebuild datatype conversion, not just NUMBER to INTERVALs. For conversions which we can do, we pre-fill the 'value' box with the appropriate function from the documentation. The user can also type in arbitary SQL expressions, which allows the user to specify optional format parameters for the relevant conversion functions, or indeed call their own functions to convert between values that don't have a built-in conversion defined. As the value gets inserted as-is into the rebuild SELECT list, any expression that is valid in that context can be specified as the conversion value. 2. NOT NULL columns Another problem that is solved by the new step in the sync wizard is adding a NOT NULL column to a table. If the table contains data (as most database tables do), you can't just add a NOT NULL column, as Oracle doesn't know what value to put in the new column for existing rows - the DDL statement will fail. There are actually 3 separate scenarios for this problem that have separate solutions within the engine: Adding a NOT NULL column to a table without a rebuild Here, the workaround is to add a column default with an appropriate value to the column you're adding: ALTER TABLE tbl1 ADD newcol NUMBER DEFAULT <value> NOT NULL; Note, however, there is something to bear in mind about this solution; once specified on a column, a default cannot be removed. To 'remove' a default from a column you change it to have a default of NULL, hence there's code in the engine to treat a NULL default the same as no default at all. Adding a NOT NULL column to a table, where a separate change forced a table rebuild Fortunately, in this case, a column default is not required - we can simply insert the default value into the rebuild SELECT clause. Changing an existing NULL to a NOT NULL column To implement this, we run an UPDATE command before the ALTER TABLE to change all the NULLs in the column to the required default value. For all three, we need some way of allowing the user to specify a default value to use instead of NULL; as this is essentially the same problem as datatype conversion (inserting values into the sync script), we can re-use the UI and engine implementation of datatype conversion values. We also provide the option to alter the new column to allow NULLs, or to ignore the problem completely. Note that there is the same (long-running) problem in SQL Compare, but it is much more of an issue in Oracle as you cannot easily roll back executed DDL statements if the script fails at some point during execution. Furthermore, the engine of SQL Compare is far less conducive to inserting user-supplied values into the generated script. As we're writing the Schema Compare engine from scratch, we used what we learnt from the SQL Compare engine and designed it to be far more modular, which makes inserting procedures like this much easier.

Read the article

A very useful custom component

- by Kevin Smith

Whenever I am debugging a problem in WebCenter Content (WCC) I often find it useful to see the contents of the internal data binder used by WCC when executing a service. I want to know the value of all parameters passed in by the caller, either a user in the web GUI or from an application calling the service via RIDC or web services. I also want to the know the value of binder variables calculated by WCC as it processes a service. What defaults has it applied based on configuration settings or profile rules? What values has it derived based on the user input? To help with this I created a component that uses a java filter to dump out the contents of the internal data binder to the WCC trace file. It dumps the binder contents using the toString() method. You can register this filter code using many different filter hooks to see how the binder is updated as WCC processes the service. By default, it uses the validateStandard filter hook which is useful during a CHECKIN service. It uses the system trace section, so make sure that trace section is enabled before looking for the output from this component. Here is some sample output>system/6 10.09 09:57:40.648 IdcServer-1 filter: postParseDataForServiceRequest, binder start -- system/6 10.09 09:57:40.698 IdcServer-1 *** LocalData *** system/6 10.09 09:57:40.698 IdcServer-1 (10 keys + 0 defaults) system/6 10.09 09:57:40.698 IdcServer-1 ClientEncoding=UTF-8 system/6 10.09 09:57:40.698 IdcServer-1 IdcService=CHECKIN_UNIVERSAL system/6 10.09 09:57:40.698 IdcServer-1 NoHttpHeaders=0 system/6 10.09 09:57:40.698 IdcServer-1 UserDateFormat=iso8601 system/6 10.09 09:57:40.698 IdcServer-1 UserTimeZone=UTC system/6 10.09 09:57:40.698 IdcServer-1 dDocTitle=Check in from RIDC using Framework Folder system/6 10.09 09:57:40.698 IdcServer-1 dDocType=Document system/6 10.09 09:57:40.698 IdcServer-1 dSecurityGroup=Public system/6 10.09 09:57:40.698 IdcServer-1 parentFolderPath=/folder1/folder2 system/6 10.09 09:57:40.698 IdcServer-1 primaryFile=testfile5.bin system/6 10.09 09:57:40.698 IdcServer-1 *** RESULT SETS ***>system/6 10.09 09:57:40.698 IdcServer-1 binder end -------------------------------------------- See the readme included in the component for more details. You can download the component from here.

Read the article

Separating text strings into a table of individual words in SQL via XML.

- by Phil Factor

p.MsoNormal {margin-top:0cm; margin-right:0cm; margin-bottom:10.0pt; margin-left:0cm; line-height:115%; font-size:11.0pt; font-family:"Calibri","sans-serif"; } Nearly nine years ago, Mike Rorke of the SQL Server 2005 XML team blogged ‘Querying Over Constructed XML Using Sub-queries’. I remember reading it at the time without being able to think of a use for what he was demonstrating. Just a few weeks ago, whilst preparing my article on searching strings, I got out my trusty function for splitting strings into words and something reminded me of the old blog. I’d been trying to think of a way of using XML to split strings reliably into words. The routine I devised turned out to be slightly slower than the iterative word chop I’ve always used in the past, so I didn’t publish it. It was then I suddenly remembered the old routine. Here is my version of it. I’ve unwrapped it from its obvious home in a function or procedure just so it is easy to appreciate. What it does is to chop a text string into individual words using XQuery and the good old nodes() method. I’ve benchmarked it and it is quicker than any of the SQL ways of doing it that I know about. Obviously, you can’t use the trick I described here to do it, because it is awkward to use REPLACE() on 1…n characters of whitespace. I’ll carry on using my iterative function since it is able to tell me the location of each word as a character-offset from the start, and also because this method leaves punctuation in (removing it takes time!). However, I can see other uses for this in passing lists as input or output parameters, or as return values. if exists (Select * from sys.xml_schema_collections where name like 'WordList') drop XML SCHEMA COLLECTION WordList go create xml schema collection WordList as ' <xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema"> <xs:element name="words"> <xs:simpleType> <xs:list itemType="xs:string" /> </xs:simpleType> </xs:element> </xs:schema>' go DECLARE @string VARCHAR(MAX) –we'll get some sample data from the great Ogden Nash Select @String='This is a song to celebrate banks, Because they are full of money and you go into them and all you hear is clinks and clanks, Or maybe a sound like the wind in the trees on the hills, Which is the rustling of the thousand dollar bills. Most bankers dwell in marble halls, Which they get to dwell in because they encourage deposits and discourage withdrawals, And particularly because they all observe one rule which woe betides the banker who fails to heed it, Which is you must never lend any money to anybody unless they don''t need it. I know you, you cautious conservative banks! If people are worried about their rent it is your duty to deny them the loan of one nickel, yes, even one copper engraving of the martyred son of the late Nancy Hanks; Yes, if they request fifty dollars to pay for a baby you must look at them like Tarzan looking at an uppity ape in the jungle, And tell them what do they think a bank is, anyhow, they had better go get the money from their wife''s aunt or ungle. But suppose people come in and they have a million and they want another million to pile on top of it, Why, you brim with the milk of human kindness and you urge them to accept every drop of it, And you lend them the million so then they have two million and this gives them the idea that they would be better off with four, So they already have two million as security so you have no hesitation in lending them two more, And all the vice-presidents nod their heads in rhythm, And the only question asked is do the borrowers want the money sent or do they want to take it withm. Because I think they deserve our appreciation and thanks, the jackasses who go around saying that health and happi- ness are everything and money isn''t essential, Because as soon as they have to borrow some unimportant money to maintain their health and happiness they starve to death so they can''t go around any more sneering at good old money, which is nothing short of providential. ' –we now turn it into XML declare @xml_data xml(WordList) set @xml_data='<words>'+ replace(@string,'&', '&')+'</words>' select T.ref.value('.', 'nvarchar(100)') from (Select @xml_data.query(' for $i in data(/words) return element li { $i } ')) A(list) cross apply A.List.nodes('/li') T(ref) …which gives (truncated, of course)…

Read the article

Using EUSM to manage EUS mappings in OUD

- by Sylvain Duloutre

EUSM is a command line tool that can be used to manage the EUS settings starting with the 11.1 release of Oracle. In the 11.1 release the tool is not yet documented in the Oracle EUS documentation, but this is planned for a coming release. The same commands used by EUSM can be performed from the Database Console GUI or from Grid Control*. For more details, search for the document ID 1085065.1 on OTN. The examples below don't include all the EUSM options, only the options that are used by EUS. EUSM is user friendly and intuitive. Typing eusm help <option> lists the parameters to be used for any of the available options. Here are the options related to connectivity with OUD : ldap_host="gnb.fr.oracle.com" - name of the OUD server. ldap_port=1389 - nonSSL (SASL) port used for OUD connections. ldap_user_dn="cn=directory manager" - OUD administrator nameldap_user_password="welcome1" - OUD administrator password Find below common commands: To List Enterprise roles in OUD eusm listEnterpriseRoles domain_name=<Domain> realm_dn=<realm> ldap_host=<hostname> ldap_port=<port> ldap_user_dn=<oud administrator> ldap_user_password=<oud admin password> To List Mappings eusm listMappings domain_name=<Domain> realm_dn=<realm> ldap_host=<hostname> ldap_port=<port> ldap_user_dn=<oud admin> ldap_user_password=<oud admin password> To List Enterprise Role Info eusm listEnterpriseRoleInfo enterprise_role=<rdn of enterprise role> domain_name=<Domain> realm_dn=<realm> ldap_host=<hostname> ldap_port=<port> ldap_user_dn="<oud admin>" ldap_user_password=<oud admin password> To Create Enterprise Role eusm createRole enterprise_role=<rdn of the enterprise role> domain_name=<Domain> realm_dn=<realm> ldap_host=<hostname> ldap_port=<port> ldap_user_dn="<oud admin>" ldap_user_password=<oud admin password> To Create User-Schema Mapping eusm createMapping database_name=<SID of target database> realm_dn="<realm>" map_type=<ENTRY/SUBTREE> map_dn="<dn of enterprise user>" schema="<name of the shared schema>" ldap_host=<oud hostname> ldap_port=<port> ldap_user_dn="<oud admin>" ldap_user_password="<oud admin password>" To Create Proxy Permission eusm createProxyPerm proxy_permission=<Name of the proxypermission> domain_name=<Domain> realm_dn="<realm>" ldap_host=<hostname> ldap_port=<port> ldap_user_dn="<oud admin>" ldap_user_password=<oud admin password> To Grant Proxy permission to Proxy group eusm grantProxyPerm proxy_permission=<Name of the proxy permission> domain_name=<Domain> realm_dn="<realm>" ldap_host=<hostname> ldap_port=<port> ldap_user_dn="<oud admin>" ldap_user_password=<password> group_dn="<dn of the enterprise group>" To Map proxy permission to proxy user in DB eusm addTargetUser proxy_permission=<Name of the proxy permission> domain_name=<Domain> realm_dn="<realm>" ldap_host=<hostname> ldap_port=<port> ldap_user_dn="<oud admin>" ldap_user_password=<oud admin password> database_name=<SID of the target database> target_user=<target database user> dbuser=<Database user with DBA privileges> dbuser_password=<database user password> dbconnect_string=<database_host>:<port>:<DBSID> Enterprise role to Global role mapping eusm addGlobalRole enterprise_role=<rdn of the enterprise role> domain_name=<Domain> realm_dn="<realm>" database_name=<SID of the target database> global_role=<name of the global role defined in the target database> dbuser=<database user> dbuser_password=<database user password> dbconnect_string=<database_host>:<port>:<DBSID> ldap_host=<oid_hostname> ldap_port=<port> ldap_user_dn="<oud admin>" ldap_user_password=<oud admin password>

Read the article

Microsoft Sql Server 2008 R2 System Databases

For a majority of software developers little time is spent understanding the inner workings of the database management systems (DBMS) they use to store data for their applications. I personally place myself in this grouping. In my case, I have used various versions of Microsoft’s SQL Server (2000, 2005, and 2008 R2) and just recently learned how valuable they really are when I was preparing to deliver a lecture on "SQL Server 2008 R2, System Databases". Microsoft Sql Server 2008 R2 System DatabasesSo what are system databases in MS SQL Server, and why should I know them? Microsoft uses system databases to support the SQL Server DBMS, much like a developer uses config files or database tables to support an application. These system databases individually provide specific functionality that allows MS SQL Server to function. Name Database File Log File Master master.mdf mastlog.ldf Resource mssqlsystemresource.mdf mssqlsystemresource.ldf Model model.mdf modellog.ldf MSDB msdbdata.mdf msdblog.ldf Distribution distmdl.mdf distmdl.ldf TempDB tempdb.mdf templog.ldf Master DatabaseIf you have used MS SQL Server then you should recognize the Master database especially if you used the SQL Server Management Studio (SSMS) to connect to a user created database. MS SQL Server requires the Master database in order for DBMS to start due to the information that it stores. Examples of data stored in the Master database User Logins Linked Servers Configuration information Information on User Databases Resource DatabaseHonestly, until recently I never knew this database even existed until I started to research SQL Server system databases. The reason for this is due largely to the fact that the resource database is hidden to users. In fact, the database files are stored within the Binn folder instead of the standard MS SQL Server database folder path. This database contains all system objects that can be accessed by all other databases. In short, this database contains all system views and store procedures that appear in all other user databases regarding system information. One of the many benefits to storing system views and store procedures in a single hidden database is the fact it improves upgrading a SQL Server database; not to mention that maintenance is decreased since only one code base has to be mainlined for all of the system views and procedures. Model DatabaseThe Model database as the name implies is the model for all new databases created by users. This allows for predefining default database objects for all new databases within a MS SQL Server instance. For example, if every database created by a user needs to have an “Audit” table when it is created then defining the “Audit” table in the model will guarantees that the table will be located in every new database create after the model is altered. MSDB DatabaseThe MSDBdatabase is used by SQL Server Agent, SQL Server Database Mail, SQL Server Service Broker, along with SQL Server. The SQL Server Agent uses this database to store job configurations and SQL job schedules along with SQL Alerts, and Operators. In addition, this database also stores all SQL job parameters along with each job’s execution history. Finally, this database is also used to store database backup and maintenance plans as well as details pertaining to SQL Log shipping if it is being used. Distribution DatabaseThe Distribution database is only used during replication and stores meta data and history information pertaining to the act of replication data. Furthermore, when transactional replication is used this database also stores information regarding each transaction. It is important to note that replication is not turned on by default in MS SQL Server and that the distribution database is hidden from SSMS. Tempdb DatabaseThe Tempdb as the name implies is used to store temporary data and data objects. Examples of this include temp tables and temp store procedures. It is important to note that when using this database all data and data objects are cleared from this database when SQL Server restarts. This database is also used by SQL Server when it is performing some internal operations. Typically, SQL Server uses this database for the purpose of large sort and index operations. Finally, this database is used to store row versions if row versioning or snapsot isolation transactions are being used by SQL Server. Additionally, I would love to hear from others about their experiences using system databases, tables, and objects in a real world environments.

Read the article

SOA, Governance, and Drugs

Why is IT governance important in service oriented architecture (SOA)? IT Governance provides a framework for making appropriate decisions based on company guidelines and accepted standards. This framework also outlines each stakeholder’s responsibilities and authority when making important architectural or design decisions. Furthermore, this framework of governance defines parameters and constraints that are used to give context and perspective when making decisions. The use of governance as it applies to SOA ensures that specific design principles and patterns are used when developing and maintaining services. When governance is consistently applied systems the following benefits are achieved according to Anne Thomas Manes in 2010. Governance makes sure that services conform to standard interface patterns, common data modeling practices, and promotes the incorporation of existing system functionality by building on top of other available services across a system. Governance defines development standards based on proven design principles and patterns that promote reuse and composition. Governance provides developers a set of proven design principles, standards and practices that promote the reduction in system based component dependencies. By following these guidelines, individual components will be easier to maintain. For me personally, I am a fan of IT governance, and feel that it valuable part of any corporate IT department. However, depending on how it is implemented can really affect the value of using IT governance. Companies need to find a way to ensure that governance does not become extreme in its policies and procedures. I know for me personally, I would really dislike working under a completely totalitarian or laissez-faire version of governance. Developers need to be able to be creative in their designs and too much governance can really impede the design process and prevent the most optimal design from being developed. On the other hand, with no governance enforced, no standards will be followed and accepted design patterns will be ignored. I have personally had to spend a lot of time working on this particular scenario and I have found that the concept of code reuse and composition is almost nonexistent. Based on this, too much time and money is wasted on redeveloping existing aspects of an application that already exist within the system as a whole. I think moving forward we will see a staggered form of IT governance, regardless if it is for SOA or IT in general. Depending on the size of a company and the size of its IT department, I can see IT governance as a layered approach in that the top layer will be defined by enterprise architects that focus on abstract concepts pertaining to high level design, general guidelines, acceptable best practices, and recommended design patterns. The next layer will be defined by solution architects or department managers that further expand on abstracted guidelines defined by the enterprise architects. This layer will contain further definitions as to when various design patterns, coding standards, and best practices are to be applied based on the context of the solutions that are being developed by the department. The final layer will be defined by the system designer or a solutions architect assed to a project in that they will define what design patterns will be used in a solution, naming conventions, as well as outline how a system will function based on the best practices defined by the previous layers. This layered approach allows for IT departments to be flexible in that system designers have creative leeway in designing solutions to meet the needs of the business, but they must operate within the confines of the abstracted IT governance guidelines. A real world example of this can be seen in the United States as it pertains to governance of the people in that the US government defines rules and regulations in the abstract and then the state governments take these guidelines and applies them based on the will of the people in each individual state. Furthermore, the county or city governments are the ones that actually enforce these rules based on how they are interpreted by local community. To further define my example, the United States government defines that marijuana is illegal. Each individual state has the option to determine this regulation as it wishes in that the state of Florida determines that all uses of the drug are illegal, but the state of California legally allows the use of marijuana for medicinal purposes only. Based on these accepted practices each local government enforces these rules in that a police officer will arrest anyone in the state of Florida for having this drug on them if they walk down the street, but in California if a person has a medical prescription for the drug they will not get arrested. REFERENCESThomas Manes, Anne. (2010). Understanding SOA Governance: http://www.soamag.com/I40/0610-2.php

Read the article

BizTalk: namespaces

- by Leonid Ganeline

BizTalk team did a good job hiding the .NET guts from developers. Developers are working with editors and hardly with .NET code. The Orchestration editor, the Mapper, the Schema editor, the Pipeline editor, all these editors hide what is going on with artifacts created and deployed. Working with the BizTalk artifacts year after year brings us some knowledge which could help to understand more about the .NET guts. I would like to highlight the .NET namespaces. What they are, how they influence our everyday tasks in the BizTalk application development. What is it? Most of the BizTalk artifacts are compiled into the NET classes. Not all of them… but I will show you later. Classes are placed inside the namespaces. I will not describe here why we need namespaces and what is it. I assume you all know about it more then me. Here I would like to emphasize that almost each BizTalk artifact is implemented as a .NET class within a .NET namespace. Where to see the namespaces in development? The namespaces are inconsistently spread across the artifact parameters. Let’s start with namespace placement in development. Then we go with namespaces in deployment and operations. I am using pictures from the BizTalk Server 2013 Beta and the Visual Studio 2012 but there was no changes regarding the namespaces starting from the BizTalk 2006. Default namespace When a new BizTalk project is created, the default namespace is set up the same as a name of a project. This namespace would be used for all new BizTalk artifacts added to this project. Orchestrations When we select a green or a red markers (the Begin and End orchestration shapes) we will see the orchestration Properties window. We also can click anywhere on the space between Port Surfaces to see this window. Schemas The only way to see the NET namespace for map is selecting the schema file name into the Solution Explorer. Notes: We can also see the Type Name parameter. It is a name of the correspondent .NET class. We can also see the Fully Qualified Name parameter. We cannot see the schema namespace when selecting any node on the schema editor surface. Only selecting a schema file name gives us a namespace parameter. If we select a <Schema> node we can get the Target Namespace parameter of the schema. This is NOT the .NET namespace! It is an XML namespace. See this XML namespace inside the XML schema, it is shown as a special targetNamespace attribute Here this XML namespace appears inside the XML document itself. It is shown as a special xmlns attribute. Maps It is similar to the schemas. The only way to see the NET namespace for map is selecting a map file name into the Solution Explorer. Pipelines It is similar to the schemas. The only way to see the NET namespace for pipeline is selecting a pipeline file name into the Solution Explorer. z Ports, Policies and Tracking Profiles The Send and Receive Ports, the Policies and the BAM Tracking Profiles do not create the .NET classes and they do not have the associated .NET namespaces. How to copy artifacts? Since the new versions of the BizTalk Server are going to production I am spending more and more time redesigning and refactoring the BizTalk applications. It is good to know how the refactoring process copes with the .NET namespaces. Let see what is going on with the namespaces when we copy the artifacts from one project to another. Here is an example: I am going to group the artifacts under the project folders. So, I have created a Group folder, have run the Add / Existing Item.. command and have chosen all artifacts in the project root. The artifact copies were created in the Group folder: What was happened with the namespaces of the artifacts? As you can see, the folder name, the “Group”, was added to the namespace. It is great! When I added a folder, I have added one more level in the name hierarchy and the namespace change just reflexes this hierarchy change. The same namespace adjustment happens when we copy the BizTalk artifacts between the projects. But there is an issue with the namespace of an orchestration. It was not changed. The namespaces of the schemas, maps, pipelines are changed but not the orchestration namespace. I have to change the orchestration namespace manually. Now another example: I am creating a new Project folder and moving the artifacts there from the project root by drag and drop. We will mention the artifact namespaces are not changed. Another example: I am copying the artifacts from the project root by (drag and drop) + Ctrl. We will mention the artifact namespaces are changed. It works exactly as it was with the Add / Existing Item.. command. Conclusion: The namespace parameter is put inconsistently in different places for different artifacts Moving artifacts changes the namespaces of the schemas, maps, pipelines but not the orchestrations.

Read the article

Microsoft Sql Server 2008 R2 System Databases

For a majority of software developers little time is spent understanding the inner workings of the database management systems (DBMS) they use to store data for their applications. I personally place myself in this grouping. In my case, I have used various versions of Microsoft’s SQL Server (2000, 2005, and 2008 R2) and just recently learned how valuable they really are when I was preparing to deliver a lecture on "SQL Server 2008 R2, System Databases". Microsoft Sql Server 2008 R2 System DatabasesSo what are system databases in MS SQL Server, and why should I know them? Microsoft uses system databases to support the SQL Server DBMS, much like a developer uses config files or database tables to support an application. These system databases individually provide specific functionality that allows MS SQL Server to function. Name Database File Log File Master master.mdf mastlog.ldf Resource mssqlsystemresource.mdf mssqlsystemresource.ldf Model model.mdf modellog.ldf MSDB msdbdata.mdf msdblog.ldf Distribution distmdl.mdf distmdl.ldf TempDB tempdb.mdf templog.ldf Master DatabaseIf you have used MS SQL Server then you should recognize the Master database especially if you used the SQL Server Management Studio (SSMS) to connect to a user created database. MS SQL Server requires the Master database in order for DBMS to start due to the information that it stores. Examples of data stored in the Master database User Logins Linked Servers Configuration information Information on User Databases Resource DatabaseHonestly, until recently I never knew this database even existed until I started to research SQL Server system databases. The reason for this is due largely to the fact that the resource database is hidden to users. In fact, the database files are stored within the Binn folder instead of the standard MS SQL Server database folder path. This database contains all system objects that can be accessed by all other databases. In short, this database contains all system views and store procedures that appear in all other user databases regarding system information. One of the many benefits to storing system views and store procedures in a single hidden database is the fact it improves upgrading a SQL Server database; not to mention that maintenance is decreased since only one code base has to be mainlined for all of the system views and procedures. Model DatabaseThe Model database as the name implies is the model for all new databases created by users. This allows for predefining default database objects for all new databases within a MS SQL Server instance. For example, if every database created by a user needs to have an “Audit” table when it is created then defining the “Audit” table in the model will guarantees that the table will be located in every new database create after the model is altered. MSDB DatabaseThe MSDBdatabase is used by SQL Server Agent, SQL Server Database Mail, SQL Server Service Broker, along with SQL Server. The SQL Server Agent uses this database to store job configurations and SQL job schedules along with SQL Alerts, and Operators. In addition, this database also stores all SQL job parameters along with each job’s execution history. Finally, this database is also used to store database backup and maintenance plans as well as details pertaining to SQL Log shipping if it is being used. Distribution DatabaseThe Distribution database is only used during replication and stores meta data and history information pertaining to the act of replication data. Furthermore, when transactional replication is used this database also stores information regarding each transaction. It is important to note that replication is not turned on by default in MS SQL Server and that the distribution database is hidden from SSMS. Tempdb DatabaseThe Tempdb as the name implies is used to store temporary data and data objects. Examples of this include temp tables and temp store procedures. It is important to note that when using this database all data and data objects are cleared from this database when SQL Server restarts. This database is also used by SQL Server when it is performing some internal operations. Typically, SQL Server uses this database for the purpose of large sort and index operations. Finally, this database is used to store row versions if row versioning or snapsot isolation transactions are being used by SQL Server. Additionally, I would love to hear from others about their experiences using system databases, tables, and objects in a real world environments.

Read the article

How to make creating viewmodels at runtime less painfull

- by Mr Happy

I apologize for the long question, it reads a bit as a rant, but I promise it's not! I've summarized my question(s) below In the MVC world, things are straightforward. The Model has state, the View shows the Model, and the Controller does stuff to/with the Model (basically), a controller has no state. To do stuff the Controller has some dependencies on web services, repository, the lot. When you instantiate a controller you care about supplying those dependencies, nothing else. When you execute an action (method on Controller), you use those dependencies to retrieve or update the Model or calling some other domain service. If there's any context, say like some user wants to see the details of a particular item, you pass the Id of that item as parameter to the Action. Nowhere in the Controller is there any reference to any state. So far so good. Enter MVVM. I love WPF, I love data binding. I love frameworks that make data binding to ViewModels even easier (using Caliburn Micro a.t.m.). I feel things are less straightforward in this world though. Let's do the exercise again: the Model has state, the View shows the ViewModel, and the ViewModel does stuff to/with the Model (basically), a ViewModel does have state! (to clarify; maybe it delegates all the properties to one or more Models, but that means it must have a reference to the model one way or another, which is state in itself) To do stuff the ViewModel has some dependencies on web services, repository, the lot. When you instantiate a ViewModel you care about supplying those dependencies, but also the state. And this, ladies and gentlemen, annoys me to no end. Whenever you need to instantiate a ProductDetailsViewModel from the ProductSearchViewModel (from which you called the ProductSearchWebService which in turn returned IEnumerable<ProductDTO>, everybody still with me?), you can do one of these things: call new ProductDetailsViewModel(productDTO, _shoppingCartWebService /* dependcy */);, this is bad, imagine 3 more dependencies, this means the ProductSearchViewModel needs to take on those dependencies as well. Also changing the constructor is painfull. call _myInjectedProductDetailsViewModelFactory.Create().Initialize(productDTO);, the factory is just a Func, they are easily generated by most IoC frameworks. I think this is bad because Init methods are a leaky abstraction. You also can't use the readonly keyword for fields that are set in the Init method. I'm sure there are a few more reasons. call _myInjectedProductDetailsViewModelAbstractFactory.Create(productDTO); So... this is the pattern (abstract factory) that is usually recommended for this type of problem. I though it was genious since it satisfies my craving for static typing, until I actually started using it. The amount of boilerplate code is I think too much (you know, apart from the ridiculous variable names I get use). For each ViewModel that needs runtime parameters you'll get two extra files (factory interface and implementation), and you need to type the non-runtime dependencies like 4 extra times. And each time the dependencies change, you get to change it in the factory as well. It feels like I don't even use an DI container anymore. (I think Castle Windsor has some kind of solution for this [with it's own drawbacks, correct me if I'm wrong]). do something with anonymous types or dictionary. I like my static typing. So, yeah. Mixing state and behavior in this way creates a problem which don't exist at all in MVC. And I feel like there currently isn't a really adequate solution for this problem. Now I'd like to observe some things: People actually use MVVM. So they either don't care about all of the above, or they have some brilliant other solution. I haven't found an indepth example of MVVM with WPF. For example, the NDDD-sample project immensely helped me understand some DDD concepts. I'd really like it if someone could point me in the direction of something similar for MVVM/WPF. Maybe I'm doing MVVM all wrong and I should turn my design upside down. Maybe I shouldn't have this problem at all. Well I know other people have asked the same question so I think I'm not the only one. To summarize Am I correct to conclude that having the ViewModel being an integration point for both state and behavior is the reason for some difficulties with the MVVM pattern as a whole? Is using the abstract factory pattern the only/best way to instantiate a ViewModel in a statically typed way? Is there something like an in depth reference implementation available? Is having a lot of ViewModels with both state/behavior a design smell?

Read the article

Data Source Security Part 2

- by Steve Felts

In Part 1, I introduced the default security behavior and listed the various options available to change that behavior. One of the key topics to understand is the difference between directly using database user and password values versus mapping from WLS user and password to the associated database values. The direct use of database credentials is relatively new to WLS, based on customer feedback. Some of the trade-offs are covered in this article. Credential Mapping vs. Database Credentials Each WLS data source has a credential map that is a mechanism used to map a key, in this case a WLS user, to security credentials (user and password). By default, when a user and password are specified when getting a connection, they are treated as credentials for a WLS user, validated, and are converted to a database user and password using a credential map associated with the data source. If a matching entry is not found in the credential map for the data source, then the user and password associated with the data source definition are used. Because of this defaulting mechanism, you should be careful what permissions are granted to the default user. Alternatively, you can define an invalid default user to ensure that no one can accidentally get through (in this case, you would need to set the initial capacity for the pool to zero so that the pool is populated only by valid users). To create an entry in the credential map: 1) First create a WLS user. In the administration console, go to Security realms, select your realm (e.g., myrealm), select Users, and select New. 2) Second, create the mapping. In the administration console, go to Services, select Data sources, select your data source name, select Security, select Credentials, and select New. See http://docs.oracle.com/cd/E24329_01/apirefs.1211/e24401/taskhelp/jdbc/jdbc_datasources/ConfigureCredentialMappingForADataSource.html for more information. The advantages of using the credential mapping are that: 1) You don’t hard-code the database user/password into a program or need to prompt for it in addition to the WLS user/password and 2) It provides a layer of abstraction between WLS security and database settings such that many WLS identities can be mapped to a smaller set of DB identities, thereby only requiring middle-tier configuration updates when WLS users are added/removed. You can cut down the number of users that have access to a data source to reduce the user maintenance overhead. For example, suppose that a servlet has the one pre-defined, special WLS user/password for data source access, hard-wired in its code in a getConnection(user, password) call. Every WebLogic user can reap the specific DBMS access coded into the servlet, but none has to have general access to the data source. For instance, there may be a ‘Sales’ DBMS which needs to be protected from unauthorized eyes, but it contains some day-to-day data that everyone needs. The Sales data source is configured with restricted access and a servlet is built that hard-wires the specific data source access credentials in its connection request. It uses that connection to deliver only the generally needed day-to-day information to any caller. The servlet cannot reveal any other data, and no WebLogic user can get any other access to the data source. This is the approach that many large applications take and is the reasoning behind the default mapping behavior in WLS. The disadvantages of using the credential map are that: 1) It is difficult to manage (create, update, delete) with a large number of users; it is possible to use WLST scripts or a custom JMX client utility to manage credential map entries. 2) You can’t share a credential map between data sources so they must be duplicated. Some applications prefer not to use the credential map. Instead, the credentials passed to getConnection(user, password) should be treated as database credentials and used to authenticate with the database for the connection, avoiding going through the credential map. This is enabled by setting the “use-database-credentials” to true. See http://docs.oracle.com/cd/E24329_01/apirefs.1211/e24401/taskhelp/jdbc/jdbc_datasources/ConfigureOracleParameters.html "Configure Oracle parameters" in Oracle WebLogic Server Administration Console Help. Use Database Credentials is not currently supported for Multi Data Source configurations. When enabled, it turns off credential mapping on Generic and Active GridLink data sources for the following attributes: 1. identity-based-connection-pooling-enabled (this interaction is available by patch in 10.3.6.0). 2. oracle-proxy-session (this interaction is first available in 10.3.6.0). 3. set client identifier (this interaction is available by patch in 10.3.6.0). Note that in the data source schema, the set client identifier feature is poorly named “credential-mapping-enabled”. The documentation and the console refer to it as Set Client Identifier. To review the behavior of credential mapping and using database credentials: - If using the credential map, there needs to be a mapping for each WLS user to database user for those users that will have access to the database; otherwise the default user for the data source will be used. If you always specify a user/password when getting a connection, you only need credential map entries for those specific users. - If using database credentials without specifying a user/password, the default user and password in the data source descriptor are always used. If you specify a user/password when getting a connection, that user will be used for the credentials. WLS users are not involved at all in the data source connection process.

Read the article

How to move a rectangle properly?

- by bodycountPP

I recently started to learn OpenGL. Right now I finished the first chapter of the "OpenGL SuperBible". There were two examples. The first had the complete code and showed how to draw a simple triangle. The second example is supposed to show how to move a rectangle using SpecialKeys. The only code provided for this example was the SpecialKeys method. I still tried to implement it but I had two problems. In the previous example I declared and instaciated vVerts in the SetupRC() method. Now as it is also used in the SpecialKeys() method, I moved the declaration and instantiation to the top of the code. Is this proper c++ practice? I copied the part where vertex positions are recalculated from the book, but I had to pick the vertices for the rectangle on my own. So now every time I press a key for the first time the rectangle's upper left vertex is moved to (-0,5:-0.5). This ok because of GLfloat blockX = vVerts[0]; //Upper left X GLfloat blockY = vVerts[7]; // Upper left Y But I also think that this is the reason why my rectangle is shifted in the beginning. After the first time a key was pressed everything works just fine. Here is my complete code I hope you can help me on those two points. GLBatch squareBatch; GLShaderManager shaderManager; //Load up a triangle GLfloat vVerts[] = {-0.5f,0.5f,0.0f, 0.5f,0.5f,0.0f, 0.5f,-0.5f,0.0f, -0.5f,-0.5f,0.0f}; //Window has changed size, or has just been created. //We need to use the window dimensions to set the viewport and the projection matrix. void ChangeSize(int w, int h) { glViewport(0,0,w,h); } //Called to draw the scene. void RenderScene(void) { //Clear the window with the current clearing color glClear(GL_COLOR_BUFFER_BIT|GL_DEPTH_BUFFER_BIT|GL_STENCIL_BUFFER_BIT); GLfloat vRed[] = {1.0f,0.0f,0.0f,1.0f}; shaderManager.UseStockShader(GLT_SHADER_IDENTITY,vRed); squareBatch.Draw(); //perform the buffer swap to display the back buffer glutSwapBuffers(); } //This function does any needed initialization on the rendering context. //This is the first opportunity to do any OpenGL related Tasks. void SetupRC() { //Blue Background glClearColor(0.0f,0.0f,1.0f,1.0f); shaderManager.InitializeStockShaders(); squareBatch.Begin(GL_QUADS,4); squareBatch.CopyVertexData3f(vVerts); squareBatch.End(); } //Respond to arrow keys by moving the camera frame of reference void SpecialKeys(int key,int x,int y) { GLfloat stepSize = 0.025f; GLfloat blockSize = 0.5f; GLfloat blockX = vVerts[0]; //Upper left X GLfloat blockY = vVerts[7]; // Upper left Y if(key == GLUT_KEY_UP) { blockY += stepSize; } if(key == GLUT_KEY_DOWN){blockY -= stepSize;} if(key == GLUT_KEY_LEFT){blockX -= stepSize;} if(key == GLUT_KEY_RIGHT){blockX += stepSize;} //Recalculate vertex positions vVerts[0] = blockX; vVerts[1] = blockY - blockSize*2; vVerts[3] = blockX + blockSize * 2; vVerts[4] = blockY - blockSize *2; vVerts[6] = blockX+blockSize*2; vVerts[7] = blockY; vVerts[9] = blockX; vVerts[10] = blockY; squareBatch.CopyVertexData3f(vVerts); glutPostRedisplay(); } //Main entry point for GLUT based programs int main(int argc, char** argv) { //Sets the working directory. Not really needed gltSetWorkingDirectory(argv[0]); //Passes along the command-line parameters and initializes the GLUT library. glutInit(&argc,argv); //Tells the GLUT library what type of display mode to use, when creating the window. //Double buffered window, RGBA-Color mode,depth-buffer as part of our display, stencil buffer also available glutInitDisplayMode(GLUT_DOUBLE|GLUT_RGBA|GLUT_DEPTH|GLUT_STENCIL); //Window size glutInitWindowSize(800,600); glutCreateWindow("MoveRect"); glutReshapeFunc(ChangeSize); glutDisplayFunc(RenderScene); glutSpecialFunc(SpecialKeys); //initialize GLEW library GLenum err = glewInit(); //Check that nothing goes wrong with the driver initialization before we try and do any rendering. if(GLEW_OK != err) { fprintf(stderr,"Glew Error: %s\n",glewGetErrorString); return 1; } SetupRC(); glutMainLoop(); return 0; }

Read the article

Why is my animation getting aborted?

- by Homer_Simpson

I have a class named Animation which handles my animations. The animation class can be called from multiple other classes. For example, the class Player.cs can call the animation class like this: Animation Playeranimation; Playeranimation = new Animation(TimeSpan.FromSeconds(2.5f), 80, 40, Animation.Sequences.forwards, 0, 5, false, true); //updating the animation public void Update(GameTime gametime) { Playeranimation.Update(gametime); } //drawing the animation public void Draw(SpriteBatch batch) { playeranimation.Draw(batch, PlayerAnimationSpritesheet, PosX, PosY, 0, SpriteEffects.None); } The class Lion.cs can call the animation class with the same code, only the animation parameters are changing because it's another animation that should be played: Animation Lionanimation; Lionanimation = new Animation(TimeSpan.FromSeconds(2.5f), 100, 60, Animation.Sequences.forwards, 0, 8, false, true); Other classes can call the animation class with the same code like the Player class. But sometimes I have some trouble with the animations. If an animation is running and then shortly afterwards another class calls the animation class too, the second animation starts but the first animation is getting aborted. In this case, the first animation couldn't run until it's end because another class started a new instance of the animation class. Why is an animation sometimes getting aborted when another animation starts? How can I solve this problem? My animation class: public class Animation { private int _animIndex, framewidth, frameheight, start, end; private TimeSpan PassedTime; private List<Rectangle> SourceRects = new List<Rectangle>(); private TimeSpan Duration; private Sequences Sequence; public bool Remove; private bool DeleteAfterOneIteration; public enum Sequences { forwards, backwards, forwards_backwards, backwards_forwards } private void forwards() { for (int i = start; i < end; i++) SourceRects.Add(new Rectangle(i * framewidth, 0, framewidth, frameheight)); } private void backwards() { for (int i = start; i < end; i++) SourceRects.Add(new Rectangle((end - 1 - i) * framewidth, 0, framewidth, frameheight)); } private void forwards_backwards() { for (int i = start; i < end - 1; i++) SourceRects.Add(new Rectangle(i * framewidth, 0, framewidth, frameheight)); for (int i = start; i < end; i++) SourceRects.Add(new Rectangle((end - 1 - i) * framewidth, 0, framewidth, frameheight)); } private void backwards_forwards() { for (int i = start; i < end - 1; i++) SourceRects.Add(new Rectangle((end - 1 - i) * framewidth, 0, framewidth, frameheight)); for (int i = start; i < end; i++) SourceRects.Add(new Rectangle(i * framewidth, 0, framewidth, frameheight)); } public Animation(TimeSpan duration, int frame_width, int frame_height, Sequences sequences, int start_interval, int end_interval, bool remove, bool deleteafteroneiteration) { Remove = remove; DeleteAfterOneIteration = deleteafteroneiteration; framewidth = frame_width; frameheight = frame_height; start = start_interval; end = end_interval; switch (sequences) { case Sequences.forwards: { forwards(); break; } case Sequences.backwards: { backwards(); break; } case Sequences.forwards_backwards: { forwards_backwards(); break; } case Sequences.backwards_forwards: { backwards_forwards(); break; } } Duration = duration; Sequence = sequences; } public void Update(GameTime dt) { PassedTime += dt.ElapsedGameTime; if (PassedTime > Duration) { PassedTime -= Duration; } var percent = PassedTime.TotalSeconds / Duration.TotalSeconds; if (DeleteAfterOneIteration == true) { if (_animIndex >= SourceRects.Count) Remove = true; _animIndex = (int)Math.Round(percent * (SourceRects.Count)); } else { _animIndex = (int)Math.Round(percent * (SourceRects.Count - 1)); } } public void Draw(SpriteBatch batch, Texture2D Textures, float PositionX, float PositionY, float Rotation, SpriteEffects Flip) { if (DeleteAfterOneIteration == true) { if (_animIndex >= SourceRects.Count) return; } batch.Draw(Textures, new Rectangle((int)PositionX, (int)PositionY, framewidth, frameheight), SourceRects[_animIndex], Color.White, Rotation, new Vector2(framewidth / 2.0f, frameheight / 2.0f), Flip, 0f); } }

Read the article

11gR2???---gipc????

- by Allen Gao

Normal 0 7.8 ? 0 2 false false false EN-US ZH-CN X-NONE DefSemiHidden="true" DefQFormat="false" DefPriority="99" LatentStyleCount="267" UnhideWhenUsed="false" QFormat="true" Name="Normal"/ UnhideWhenUsed="false" QFormat="true" Name="heading 1"/ UnhideWhenUsed="false" QFormat="true" Name="Title"/ UnhideWhenUsed="false" QFormat="true" Name="Subtitle"/ UnhideWhenUsed="false" QFormat="true" Name="Strong"/ UnhideWhenUsed="false" QFormat="true" Name="Emphasis"/ UnhideWhenUsed="false" Name="Table Grid"/ UnhideWhenUsed="false" QFormat="true" Name="No Spacing"/ UnhideWhenUsed="false" Name="Light Shading"/ UnhideWhenUsed="false" Name="Light List"/ UnhideWhenUsed="false" Name="Light Grid"/ UnhideWhenUsed="false" Name="Medium Shading 1"/ UnhideWhenUsed="false" Name="Medium Shading 2"/ UnhideWhenUsed="false" Name="Medium List 1"/ UnhideWhenUsed="false" Name="Medium List 2"/ UnhideWhenUsed="false" Name="Medium Grid 1"/ UnhideWhenUsed="false" Name="Medium Grid 2"/ UnhideWhenUsed="false" Name="Medium Grid 3"/ UnhideWhenUsed="false" Name="Dark List"/ UnhideWhenUsed="false" Name="Colorful Shading"/ UnhideWhenUsed="false" Name="Colorful List"/ UnhideWhenUsed="false" Name="Colorful Grid"/ UnhideWhenUsed="false" Name="Light Shading Accent 1"/ UnhideWhenUsed="false" Name="Light List Accent 1"/ UnhideWhenUsed="false" Name="Light Grid Accent 1"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 1"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 1"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 1"/ UnhideWhenUsed="false" QFormat="true" Name="List Paragraph"/ UnhideWhenUsed="false" QFormat="true" Name="Quote"/ UnhideWhenUsed="false" QFormat="true" Name="Intense Quote"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 1"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 1"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 1"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 1"/ UnhideWhenUsed="false" Name="Dark List Accent 1"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 1"/ UnhideWhenUsed="false" Name="Colorful List Accent 1"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 1"/ UnhideWhenUsed="false" Name="Light Shading Accent 2"/ UnhideWhenUsed="false" Name="Light List Accent 2"/ UnhideWhenUsed="false" Name="Light Grid Accent 2"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 2"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 2"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 2"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 2"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 2"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 2"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 2"/ UnhideWhenUsed="false" Name="Dark List Accent 2"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 2"/ UnhideWhenUsed="false" Name="Colorful List Accent 2"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 2"/ UnhideWhenUsed="false" Name="Light Shading Accent 3"/ UnhideWhenUsed="false" Name="Light List Accent 3"/ UnhideWhenUsed="false" Name="Light Grid Accent 3"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 3"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 3"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 3"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 3"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 3"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 3"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 3"/ UnhideWhenUsed="false" Name="Dark List Accent 3"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 3"/ UnhideWhenUsed="false" Name="Colorful List Accent 3"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 3"/ UnhideWhenUsed="false" Name="Light Shading Accent 4"/ UnhideWhenUsed="false" Name="Light List Accent 4"/ UnhideWhenUsed="false" Name="Light Grid Accent 4"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 4"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 4"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 4"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 4"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 4"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 4"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 4"/ UnhideWhenUsed="false" Name="Dark List Accent 4"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 4"/ UnhideWhenUsed="false" Name="Colorful List Accent 4"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 4"/ UnhideWhenUsed="false" Name="Light Shading Accent 5"/ UnhideWhenUsed="false" Name="Light List Accent 5"/ UnhideWhenUsed="false" Name="Light Grid Accent 5"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 5"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 5"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 5"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 5"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 5"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 5"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 5"/ UnhideWhenUsed="false" Name="Dark List Accent 5"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 5"/ UnhideWhenUsed="false" Name="Colorful List Accent 5"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 5"/ UnhideWhenUsed="false" Name="Light Shading Accent 6"/ UnhideWhenUsed="false" Name="Light List Accent 6"/ UnhideWhenUsed="false" Name="Light Grid Accent 6"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 6"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 6"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 6"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 6"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 6"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 6"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 6"/ UnhideWhenUsed="false" Name="Dark List Accent 6"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 6"/ UnhideWhenUsed="false" Name="Colorful List Accent 6"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 6"/ UnhideWhenUsed="false" QFormat="true" Name="Subtle Emphasis"/ UnhideWhenUsed="false" QFormat="true" Name="Intense Emphasis"/ UnhideWhenUsed="false" QFormat="true" Name="Subtle Reference"/ UnhideWhenUsed="false" QFormat="true" Name="Intense Reference"/ UnhideWhenUsed="false" QFormat="true" Name="Book Title"/ classid="clsid:38481807-CA0E-42D2-BF39-B33AF135CC4D" id=ieooui st1\:*{behavior:url(#ieooui) } /* Style Definitions */ table.MsoNormalTable {mso-style-name:????; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} ??????,????11gR2 ??????gipcd(????ora.gipcd)????,????gipc???,????????????? ????,??oracle????,??????????,??????????,???????????cache fusion ?????????????,?????????????oracle????????????,??????,???????(?????????Note 220970.1:RAC: Frequently Asked Questions,?????????)???????,???????????/????,?????????????? ??,?10gR2 ?11gR1????,?????????????,??:Linux bonding, AIX EtherChannel, HP-UX APA ???????????????????????????????(??,????????????????,???????)???????10g ?11.1 ??????,??????????????????(???????),????????????????subnet??????,????,?????oracle???????????,??????????????,???????????,??????????????,??????????????????????,??:????,?????? ?????????,?11gR2??(????,?11.2.0.2??),oracle??????????????,?????gipc(Grid IPC)???,??????????gipcd.bin?????????,??????? 1. ??????,????????????,?????????,?????????gpnp profile??????????????????? 2. ???????????,??????????,???????????????? 3. ?????????????,?????????/???????????,????????,???????? ??,oracle????????????????????????/??????,??,?????????? ??,???????????????,?????gipc ?HAIP????????????,??????????????,???????????????????:?????????,??:ocssd.bin????,crsd.bin??????;???:oracle RAC ??,??:ASM ??????,?????????????,?????????????????????gipc,???????????,?????????????????????,????????????????,?????,????????????,??,?????????????????gipc???,oracle ??????????????,??????????????,????????????????,HAIP ????,????oracle RAC??????/?????????,????????????????,????,????????HAIP?????,????????????ASM??,?????(???NM??)??????????,?????????????????HAIP,????????,????,???????? “Redundant Interconnect with Highly Available IP (HAIP) ??”? ???,???????????????????????? 1.??????gipcd.log 2013-07-17 12:28:28.071: [ default][3041003216]gipcd START pid=22337 Oracle Grid IPC Daemon 2013-07-17 12:28:28.072: [ GIPCD][3041003216] gipcdMain: gipcd Started <<<<<< gipcd????????? …… 2013-07-17 12:28:29.046: [ GPNP][3041003216]clsgpnp_getCachedProfileEx: [at clsgpnp.c:613] Result: (26) CLSGPNP_NO_PROFILE. Can't get offline GPnP service profile: local gpnpd is up and running. Use getProfile instead. 2013-07-17 12:28:29.046: [ GPNP][3041003216]clsgpnp_getCachedProfileEx: [at clsgpnp.c:623] Result: (26) CLSGPNP_NO_PROFILE. Failed to get offline GPnP service profile. 2013-07-17 12:28:29.066: [ GPNP][3041003216]clsgpnpm_newWiredMsg: [at clsgpnpm.c:741] Msg-reply has soap fault 10 (Operation returned Retry (error CLSGPNP_CALL_AGAIN)) [uri "http://www.grid-pnp.org/2005/12/gpnp-errors#"] <<<< gipcd ????gpnp profile?????????log??GI??????,?????????,?????gpnpd???????? …… 2013-07-17 12:28:39.342: [ CLSINET][3023027088] # 0 Interface 'eth1',ip='192.168.254.30',mac='00-0c-29-a8-14-65',mask='255.255.255.0',net='192.168.254.0',use='cluster_interconnect' 2013-07-17 12:28:39.342: [ CLSINET][3023027088] # 1 Interface 'eth2',ip='192.168.254.31',mac='00-0c-29-a8-14-6f',mask='255.255.255.0',net='192.168.254.0',use='cluster_interconnect' <<<<< gipcd ????????????????,???????2??????????? …… 2013-07-17 12:28:39.344: [GIPCHTHR][3025128336] gipchaWorkerUpdateInterface: created local bootstrap interface for node 'single1', haName 'gipcd_ha_name', inf 'mcast://230.0.1.0:42424/192.168.254.30' 2013-07-17 12:28:39.344: [GIPCHTHR][3025128336] gipchaWorkerUpdateInterface: created local interface for node 'single1', haName 'gipcd_ha_name', inf '192.168.254.30:46782' 2013-07-17 12:28:39.345: [GIPCHTHR][3025128336] gipchaWorkerUpdateInterface: created local bootstrap interface for node 'single1', haName 'gipcd_ha_name', inf 'mcast://230.0.1.0:42424/192.168.254.31' 2013-07-17 12:28:39.345: [GIPCHTHR][3025128336] gipchaWorkerUpdateInterface: created local interface for node 'single1', haName 'gipcd_ha_name', inf '192.168.254.31:39332' <<<<<<< gipcd ????????(????????????????)?endpoint ????? …… 2013-07-17 12:28:56.767: [GIPCHGEN][3023027088] gipchaNodeCreate: adding new node 0x9c107d8 { host 'single2', haName 'gipcd_ha_name', srcLuid 465fb26d-8b46eb95, dstLuid 00000000-00000000 numInf 0, contigSeq 0, lastAck 0, lastValidAck 0, sendSeq [0 : 0], createTime 797327224, flags 0x0 } <<<<< ???????? …… 2013-07-17 12:28:58.415: [GIPCHTHR][3025128336] gipchaWorkerUpdateInterface: created remote interface for node 'single2', haName 'gipcd_ha_name', inf 'udp://192.168.254.33:16663' 2013-07-17 12:28:58.415: [GIPCHGEN][3025128336] gipchaWorkerAttachInterface: Interface attached inf 0x9c0bb60 { host 'single2', haName 'gipcd_ha_name', local 0xb4c4e590, ip '192.168.254.33:16663', subnet '192.168.254.0', mask '255.255.255.0', numRef 0, numFail 0, flags 0x6 } 2013-07-17 12:28:58.415: [GIPCHTHR][3025128336] gipchaWorkerUpdateInterface: created remote interface for node 'single2', haName 'gipcd_ha_name', inf 'udp://192.168.254.32:17578' 2013-07-17 12:28:58.415: [GIPCHGEN][3025128336] gipchaWorkerAttachInterface: Interface attached inf 0x9c0a900 { host 'single2', haName 'gipcd_ha_name', local 0xb4cb8eb8, ip '192.168.254.32:17578', subnet '192.168.254.0', mask '255.255.255.0', numRef 0, numFail 0, flags 0x6 } <<<<<< gipcd ??????????????? …… 2013-07-17 12:29:36.120: [GIPCDMON][3027229584] gipcdMonitorSaveInfMetrics: inf[ 0] eth1 - rank 99, avgms 6.326531 [ 257 / 250 / 245 ] 2013-07-17 12:29:36.120: [GIPCDMON][3027229584] gipcdMonitorSaveInfMetrics: inf[ 1] eth2 - rank 99, avgms 5.182186 [ 259 / 250 / 247 ] <<<<<gipcd ??????????? …… 2. ?????????down???gipcd.log? 2013-07-17 13:23:20.346: [ CLSINET][3027229584] Returning NETDATA: 2 interfaces 2013-07-17 13:23:20.346: [ CLSINET][3027229584] # 0 Interface 'eth1',ip='192.168.254.30',mac='00-0c-29-a8-14-65',mask='255.255.255.0',net='192.168.254.0',use='cluster_interconnect' 2013-07-17 13:23:20.346: [ CLSINET][3027229584] # 1 Interface 'eth2',ip='192.168.254.31',mac='00-0c-29-a8-14-6f',mask='255.255.255.0',net='192.168.254.0',use='cluster_interconnect' 2013-07-17 13:23:20.359: [GIPCDMON][3027229584] gipcdMonitorSaveInfMetrics: inf[ 0] eth1 - rank 99, avgms 1.560694 [ 171 / 173 / 173 ] 2013-07-17 13:23:20.359: [GIPCDMON][3027229584] gipcdMonitorSaveInfMetrics: inf[ 1] eth2 - rank 99, avgms 1.802326 [ 172 / 172 / 172 ] <<<<<<<< gipcd ?????????? …… +++????“ifconfig eth1 down”????????????? …… 2013-07-17 13:23:44.397: [ CLSINET][3027229584] # 0 Interface 'eth2',ip='192.168.254.31',mac='00-0c-29-a8-14-6f',mask='255.255.255.0',net='192.168.254.0',use='cluster_interconnect' 2013-07-17 13:23:44.397: [GIPCDMON][3027229584] gipcdMonitorUpdate: interface went down - [ ip 192.168.254.30, subnet 192.168.254.0, mask 255.255.255.0 ] 2013-07-17 13:23:44.397: [GIPCDMON][3027229584] gipcdMonitorUpdate: msg sent to client thread (([update(ip: 192.168.254.30, mask: 255.255.255.0, subnet 192.168.254.0), state(gipcdadapterstateDown)])) <<<<<<<< gipcd ????eth1 down?,???????(??:ocssd.bin)????? …… 2013-07-17 13:23:44.426: [GIPCHGEN][3025128336] gipchaInterfaceDisable: disabling interface 0xb4c4e590 { host '', haName 'gipcd_ha_name', local (nil), ip '192.168.254.30', subnet '192.168.254.0', mask '255.255.255.0', numRef 0, numFail 1, flags 0x1cd } 2013-07-17 13:23:44.428: [GIPCHGEN][3025128336] gipchaInterfaceDisable: disabling interface 0x9c0bb60 { host 'single2', haName 'gipcd_ha_name', local 0xb4c4e590, ip '192.168.254.33:16663', subnet '192.168.254.0', mask '255.255.255.0', numRef 0, numFail 0, flags 0x86 } 2013-07-17 13:23:44.428: [GIPCHALO][3025128336] gipchaLowerCleanInterfaces: performing cleanup of disabled interface 0x9c0bb60 { host 'single2', haName 'gipcd_ha_name', local 0xb4c4e590, ip '192.168.254.33:16663', subnet '192.168.254.0', mask '255.255.255.0', numRef 0, numFail 0, flags 0xa6 } <<<<<<<<gipcd ????????eth1 ???,????????????????????? …… 2013-07-17 13:24:08.747: [GIPCDMON][3027229584] gipcdMonitorSaveInfMetrics: inf[ 0] eth2 - rank 99, avgms 1.955307 [ 204 / 181 / 179 ] <<<<<<<gipcd ???????????? ??:??????,??????????????????,????????????????,???????????eth1??HAIP,?failover?eth2 ?,????,????ASM??????? 3. ???eht1???? ++ ????”ifconfig eth1 up”????eth1 2013-07-17 13:36:31.260: [GIPCDMON][3027229584] gipcdMonitorUpdate: New Interface found - [ ip 192.168.254.30, subnet 192.168.254.0, mask 255.255.255.0 ] 2013-07-17 13:36:31.260: [GIPCDMON][3027229584] gipcdMonitorUpdate: msg sent to client thread (([update(ip: 192.168.254.30, mask: 255.255.255.0, subnet 192.168.254.0), state(gipcdadapterstateUp)])) <<<<< gpicd ?????????? …… 2013-07-17 13:36:31.471: [GIPCHTHR][3025128336] gipchaWorkerUpdateInterface: created local bootstrap interface for node 'single1', haName 'gipcd_ha_name', inf 'mcast://230.0.1.0:42424/192.168.254.30' 2013-07-17 13:36:31.471: [GIPCHTHR][3025128336] gipchaWorkerUpdateInterface: created local interface for node 'single1', haName 'gipcd_ha_name', inf '192.168.254.30:55548' <<<<<< ?????endpoint???? …… 2013-07-17 13:37:11.493: [ CLSINET][3027229584] Returning NETDATA: 2 interfaces 2013-07-17 13:37:11.493: [ CLSINET][3027229584] # 0 Interface 'eth1',ip='192.168.254.30',mac='00-0c-29-a8-14-65',mask='255.255.255.0',net='192.168.254.0',use='cluster_interconnect' 2013-07-17 13:37:11.493: [ CLSINET][3027229584] # 1 Interface 'eth2',ip='192.168.254.31',mac='00-0c-29-a8-14-6f',mask='255.255.255.0',net='192.168.254.0',use='cluster_interconnect' 2013-07-17 13:37:11.510: [GIPCDMON][3027229584] gipcdMonitorSaveInfMetrics: inf[ 0] eth2 - rank 99, avgms 6.141304 [ 307 / 184 / 184 ] <<<<<<<< <<<<<<<< gipcd??????? ??:??????,??????????????????,????????????????,????????failover?eth2??HAIP,?????eth1 ?,????,????ASM??????? ??,????????,gipcd ???????????,??,????????,?????????(????)????,gipcd???????????,??????HAIP???,???????????????(??:Linux bonding,etherchannel?),???????????,????????? ??????????????11gR2 ??????gipcd????,????????????,?????????? ??????????,???????????,??“??:11gR2???---gipc????"?

Read the article

???????,???????????

- by ??-Oracle

Normal 0 7.8 ? 0 2 false false false EN-US ZH-CN X-NONE ??: 1.???????; 2.??????????????????; 3.????????????????,??????????,????????; ??: ?????????: SQL> create table test_b (id number(10)) tablespace bbb; Table created. SQL> insert into test_b values (1); 1 row created. SQL> commit; NAME -------------------------------------------------------------------------------- FILE# ---------- /opt/oracle/oradata/R11203/aaa.dbf 10 /opt/oracle/oradata/R11203/bbb.dbf 11 11 rows selected. SQL> host ??????,?????? bash-4.2$ ls -al /opt/oracle/oradata/R11203/bbb.dbf -rw-rw---- 1 oracle dba 10493952 Apr 4 09:53 /opt/oracle/oradata/R11203/bbb.dbf bash-4.2$ mv /opt/oracle/oradata/R11203/bbb.dbf /opt/oracle/oradata/R11203/bbb.dbf.bak bash-4.2$ sqlplus / as sysdba SQL*Plus: Release 11.2.0.3.0 Production on Fri Apr 4 09:55:03 2014 Copyright (c) 1982, 2011, Oracle. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production With the Partitioning, OLAP, Data Mining and Real Application Testing options SQL> alter tablespace bbb read only; alter tablespace bbb read only * ERROR at line 1: ORA-01116: error in opening database file 11 ORA-01110: data file 11: '/opt/oracle/oradata/R11203/bbb.dbf' ORA-27041: unable to open file HPUX-ia64 Error: 2: No such file or directory Additional information: 3 SQL> shutdown immediate; ORA-01116: error in opening database file 11 ORA-01110: data file 11: '/opt/oracle/oradata/R11203/bbb.dbf' ORA-27041: unable to open file HPUX-ia64 Error: 2: No such file or directory Additional information: 3 SQL> select status from v$instance; STATUS ------------ OPEN SQL> alter system switch logfile; System altered. SQL> / System altered. SQL> / System altered. SQL>/ System altered. SQL> / System altered. SQL> / System altered. SQL> ?? SQL> shutdown immediate; ORA-01116: error in opening database file 11 ORA-01110: data file 11: '/opt/oracle/oradata/R11203/bbb.dbf' ORA-27041: unable to open file HPUX-ia64 Error: 2: No such file or directory Additional information: 3 SQL> shutdown abort; ORACLE instance shut down. ???????mount?? SQL> startup mount; ORACLE instance started. Total System Global Area 329859072 bytes Fixed Size 2182336 bytes Variable Size 285213504 bytes Database Buffers 37748736 bytes Redo Buffers 4714496 bytes Database mounted. ??alter database create datafile <> as ....???,???????????: SQL> alter database create datafile 11; Database altered. ???????redo log????????? SQL> recover datafile 11; Media recovery complete. SQL> alter database open; Database altered. SQL> select * from test_b; ID ---------- 1 DefSemiHidden="true" DefQFormat="false" DefPriority="99" LatentStyleCount="267" UnhideWhenUsed="false" QFormat="true" Name="Normal"/ UnhideWhenUsed="false" QFormat="true" Name="heading 1"/ UnhideWhenUsed="false" QFormat="true" Name="Title"/ UnhideWhenUsed="false" QFormat="true" Name="Subtitle"/ UnhideWhenUsed="false" QFormat="true" Name="Strong"/ UnhideWhenUsed="false" QFormat="true" Name="Emphasis"/ UnhideWhenUsed="false" Name="Table Grid"/ UnhideWhenUsed="false" QFormat="true" Name="No Spacing"/ UnhideWhenUsed="false" Name="Light Shading"/ UnhideWhenUsed="false" Name="Light List"/ UnhideWhenUsed="false" Name="Light Grid"/ UnhideWhenUsed="false" Name="Medium Shading 1"/ UnhideWhenUsed="false" Name="Medium Shading 2"/ UnhideWhenUsed="false" Name="Medium List 1"/ UnhideWhenUsed="false" Name="Medium List 2"/ UnhideWhenUsed="false" Name="Medium Grid 1"/ UnhideWhenUsed="false" Name="Medium Grid 2"/ UnhideWhenUsed="false" Name="Medium Grid 3"/ UnhideWhenUsed="false" Name="Dark List"/ UnhideWhenUsed="false" Name="Colorful Shading"/ UnhideWhenUsed="false" Name="Colorful List"/ UnhideWhenUsed="false" Name="Colorful Grid"/ UnhideWhenUsed="false" Name="Light Shading Accent 1"/ UnhideWhenUsed="false" Name="Light List Accent 1"/ UnhideWhenUsed="false" Name="Light Grid Accent 1"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 1"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 1"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 1"/ UnhideWhenUsed="false" QFormat="true" Name="List Paragraph"/ UnhideWhenUsed="false" QFormat="true" Name="Quote"/ UnhideWhenUsed="false" QFormat="true" Name="Intense Quote"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 1"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 1"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 1"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 1"/ UnhideWhenUsed="false" Name="Dark List Accent 1"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 1"/ UnhideWhenUsed="false" Name="Colorful List Accent 1"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 1"/ UnhideWhenUsed="false" Name="Light Shading Accent 2"/ UnhideWhenUsed="false" Name="Light List Accent 2"/ UnhideWhenUsed="false" Name="Light Grid Accent 2"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 2"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 2"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 2"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 2"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 2"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 2"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 2"/ UnhideWhenUsed="false" Name="Dark List Accent 2"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 2"/ UnhideWhenUsed="false" Name="Colorful List Accent 2"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 2"/ UnhideWhenUsed="false" Name="Light Shading Accent 3"/ UnhideWhenUsed="false" Name="Light List Accent 3"/ UnhideWhenUsed="false" Name="Light Grid Accent 3"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 3"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 3"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 3"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 3"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 3"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 3"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 3"/ UnhideWhenUsed="false" Name="Dark List Accent 3"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 3"/ UnhideWhenUsed="false" Name="Colorful List Accent 3"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 3"/ UnhideWhenUsed="false" Name="Light Shading Accent 4"/ UnhideWhenUsed="false" Name="Light List Accent 4"/ UnhideWhenUsed="false" Name="Light Grid Accent 4"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 4"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 4"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 4"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 4"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 4"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 4"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 4"/ UnhideWhenUsed="false" Name="Dark List Accent 4"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 4"/ UnhideWhenUsed="false" Name="Colorful List Accent 4"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 4"/ UnhideWhenUsed="false" Name="Light Shading Accent 5"/ UnhideWhenUsed="false" Name="Light List Accent 5"/ UnhideWhenUsed="false" Name="Light Grid Accent 5"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 5"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 5"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 5"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 5"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 5"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 5"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 5"/ UnhideWhenUsed="false" Name="Dark List Accent 5"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 5"/ UnhideWhenUsed="false" Name="Colorful List Accent 5"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 5"/ UnhideWhenUsed="false" Name="Light Shading Accent 6"/ UnhideWhenUsed="false" Name="Light List Accent 6"/ UnhideWhenUsed="false" Name="Light Grid Accent 6"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 6"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 6"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 6"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 6"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 6"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 6"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 6"/ UnhideWhenUsed="false" Name="Dark List Accent 6"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 6"/ UnhideWhenUsed="false" Name="Colorful List Accent 6"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 6"/ UnhideWhenUsed="false" QFormat="true" Name="Subtle Emphasis"/ UnhideWhenUsed="false" QFormat="true" Name="Intense Emphasis"/ UnhideWhenUsed="false" QFormat="true" Name="Subtle Reference"/ UnhideWhenUsed="false" QFormat="true" Name="Intense Reference"/ UnhideWhenUsed="false" QFormat="true" Name="Book Title"/ /* Style Definitions */ table.MsoNormalTable {mso-style-name:????; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.5pt; mso-bidi-font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-font-kerning:1.0pt;}

Read the article

Struts 1 ActionForm - retrieving a collection from pure HTML

- by Yaneeve

Hi all I have (just like the rest) inherited some struts 1 code. I have had need to add a few more pages to this project. What I cannot figure out is how to map several distinct but similarly natured input elements to the my ActionForm. Let me elaborate. I create a new <Input> element dynamically as the user inputs more and more items (I use the YUI autocomplete form element and for each entered input I add it as an input element to my form and draw a new YUI autocomplete - complex sounding, I know) So... My form looks a bit like (... after some prettifying and some such...): <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd"> <html> <head> <meta http-equiv="content-type" content="text/html; charset=utf-8"> <title>My Cool App - Test Case Builder</title> <link rel="stylesheet" type="text/css" href="../script/yui/fonts/fonts-min.css" /> <link rel="stylesheet" type="text/css" href="../skins/myCoolApp/button/button.css" /> <link rel="stylesheet" type="text/css" href="../script/yui/autocomplete/assets/skins/sam/autocomplete.css" /> <link rel="stylesheet" type="text/css" media="screen" href="../skins/myCoolApp/testcase.css" />  <script type="text/javascript" src="../script/yui/yahoo-dom-event/yahoo-dom-event.js"></script> <script type="text/javascript" src="../script/yui/element/element-min.js"></script> <script type="text/javascript" src="../script/yui/button/button-min.js"></script> <script type="text/javascript" src="../script/yui/datasource/datasource-min.js"></script> <script type="text/javascript" src="../script/yui/autocomplete/autocomplete-min.js"></script>  <script type="text/javascript" src="../script/myCoolApp/myCoolApp.js" ></script> <script type="text/javascript" src="../script/myCoolApp/stack.js" ></script> <script type="text/javascript" src="../script/myCoolApp/testcase/testcase.js"></script> <script type="text/javascript" src="../script/myCoolApp/testcase/default-data.js" ></script> <script type="text/javascript" src="../script/myCoolApp/testcase/data-structs.js" ></script> <script type="text/javascript" src="../script/myCoolApp/testcase/ui-elements.js" ></script> </head> <body class="cf010"> <div id="wrap"> <div id="header"> <div id="main-header"> COOL APP </div> </div> <div id="main-body"> <div id="content"> <div class="col main"> <div id="main"> <form method="post" id="testcaseForm" class="typea" action=""> <fieldset> <legend>Test Case Builder</legend> <div id="tk1" class="tabcontrol"> <ul class="tabs"> <li class="first active"> <a href="#"> <span>General</span> </a> </li> <li class="last"> <a href="#"> <span>Parameters</span> </a> </li> </ul> <div id="tab0" class="tc-panel"> <dl class="cls9"> <dt> <label for="scenario">Choose Scenario:</label> </dt> <dd> <input type="text" id="scenario" name="scenario" class="text" /> <span id="scenarioToggle"></span> <div class="auto-complete" id="scenarioContainer"></div> </dd> <dt> <label for="ruleID">Choose Rule ID:</label> </dt> <dd> <input type="text" id="ruleID" name="ruleID" class="text" /> <span id="ruleIDToggle"></span> <div class="auto-complete" id="ruleIDContainer"></div> </dd> <dt> <label for="Test Case Name" accesskey="t"><span class="accesskey">T</span>est Case Name:</label> </dt> <dd> <input type="text" id="testCaseName" name="testCaseName" class="text" /> </dd> </dl> </div> <div id="tab1" class="tc-panel hidden"> <div class="toolbar" id="action-bar"> <ul> <li class="first"> <a title="select all" href="#" id="btmSelectAll" class="button"> <span>select all</span> </a> </li> <li> <a title="remove row" href="#" id="btmRemove" class="button"> <span>remove row</span> </a> </li> <li> <a title="undo last" href="#" id="btmRollBack" class="button disabled"> <span>undo last</span> </a> </li> <li class="last"> <a title="accept row" href="#" id="btmAccept" class="button disabled"> <span>accept row</span> </a> </li> </ul> </div> <div id="param.list" class="gridclip"> <table id='param.list.tbl' class='grid modela' > <caption>Test Case Summary</caption> <col/><col/><col/> <thead> <tr> <th class='hl center first'> <input class='grid-select-all' type='checkbox' /> <th> <th scope='col'>Row</th> <th scope='col'>Parameter</th> <th scope='col' class='last'>Value</th> </tr> </thead> <tfoot> <tr> <th scope='row'>Total</th> <td colspan='3'>2 parameters as Test Case input</td> </tr> </tfoot> <tbody id='param.list.tbl.body'> <tr class='odd'> <td class='rowcheck center first'> <input value='param1###value1' id='cb1' name='SelectedRows' class='grid-select-row' type='checkbox'/> </td> <td class='id'>1</td> <td>param1</td> <td class='last'>value1</td> </tr> <tr class='even'> <td class='rowcheck center first'> <input value='param2###value2' id='cb1' name='SelectedRows' class='grid-select-row' type='checkbox'/> </td> <td class='id'>2</td> <td>param2</td> <td class='last'>value2</td> </tr> <tr class='odd'> <td class='rowcheck center first' /> <td class='id'><em>new</em></td> <td> <dl class='clsTable'> <dt> <input type='text' id='param' name='param' class='text paramInput' /> </dt> <dd> <span id='paramToggle' /> </dd> <div class='auto-complete' id='paramContainer' /> </dl> </td> <td class='last'> <dl class='clsTable'> <dt> <input type='text' id='value' name='value' class='text valueInput' /> </dt> </dl> </td> </tr> </tbody> </table> </div> </div> </div>  </fieldset> <div class="submit-box"> <input type="submit" name="formRun" id="formRun" class="form-save" value="Execute" accesskey="x" title="Run: Press Alt + [Shift] + x" /> <input type="submit" name="formSave" id="formSave" value="Save" accesskey="s" title="Save: Press Alt + [Shift] + s" /> <input type="submit" name="formLoad" id="formLoad" value="Load" accesskey="l" title="Load: Press Alt + [Shift] + l" /> <input type="submit" name="formCancel" id="formCancel" class="form-cancel" value="Cancel" accesskey="c" title="Cancel: Press Alt + [Shift] + c" /> </div> </form> </div> </div> </div> </div> </div> </body> </html> As you can see the following is pretty much a duplicate: <tr class='odd'> <td class='rowcheck center first'> <input value='param1###value1' id='cb1' name='SelectedRows' class='grid-select-row' type='checkbox'/> </td> <td class='id'>1</td> <td>param1</td> <td class='last'>value1</td> </tr> <tr class='even'> <td class='rowcheck center first'> <input value='param2###value2' id='cb1' name='SelectedRows' class='grid-select-row' type='checkbox'/> </td> <td class='id'>2</td> <td>param2</td> <td class='last'>value2</td> </tr> The relevant part of my stuts-config.xml file is: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE struts-config PUBLIC "-//Apache Software Foundation//DTD Struts Configuration 1.2//EN" "http://struts.apache.org/dtds/struts-config_1_2.dtd"> <struts-config> <data-sources /> <form-beans> <form-bean name="TestCaseForm" type="com.blahblah.mycoolapp.forms.TestCaseForm" /> </form-beans> <action-mappings> <action path="/pages/SaveTestCase" name="TestCaseForm" type="org.springframework.web.struts.DelegatingActionProxy" scope="request"> </action> </action-mappings> <message-resources parameter="MessageResources" /> </struts-config> I also use spring 2.56 (The relevant part being): <?xml version="1.0" encoding="UTF-8"?> <beans xmlns="http://www.springframework.org/schema/beans" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-2.5.xsd"> <bean name="/pages/SaveTestCase" class="com.blahblah.mycoolapp.actions.TestCaseBuilderSaveAction" /> </beans> My Java ActionForm class (from what I had learned off the net) is: package com.blahblah.mycoolapp.forms; import java.util.ArrayList; import java.util.List; import org.apache.struts.action.ActionForm; public class TestCaseForm extends ActionForm { private static final long serialVersionUID = 2352146257739099766L; private String scenario; private String ruleID; private String testCaseName; private List<String> SelectedRows = new ArrayList<String>() ; public String getScenario() { return scenario; } public void setScenario(String scenario) { this.scenario = scenario; } public String getRuleID() { return ruleID; } public void setRuleID(String ruleID) { this.ruleID = ruleID; } public String getTestCaseName() { return testCaseName; } public void setTestCaseName(String testCaseName) { this.testCaseName = testCaseName; } public List<String> getSelectedRows() { return SelectedRows; } public void setSelectedRows(int index, String value) { this.SelectedRows.add(value); } } The question is why do I get an empty SelectedRows in my TestCaseBuilderSave Action? Thanks all who have the patience to read such a long question... and (hopefully) thanks to all you potential saviors :)

Read the article

SQLite, python, unicode, and non-utf data

- by Nathan Spears

I started by trying to store strings in sqlite using python, and got the message: sqlite3.ProgrammingError: You must not use 8-bit bytestrings unless you use a text_factory that can interpret 8-bit bytestrings (like text_factory = str). It is highly recommended that you instead just switch your application to Unicode strings. Ok, I switched to Unicode strings. Then I started getting the message: sqlite3.OperationalError: Could not decode to UTF-8 column 'tag_artist' with text 'Sigur Rós' when trying to retrieve data from the db. More research and I started encoding it in utf8, but then 'Sigur Rós' starts looking like 'Sigur RÃ³s' note: My console was set to display in 'latin_1' as @John Machin pointed out. What gives? After reading this, describing exactly the same situation I'm in, it seems as if the advice is to ignore the other advice and use 8-bit bytestrings after all. I didn't know much about unicode and utf before I started this process. I've learned quite a bit in the last couple hours, but I'm still ignorant of whether there is a way to correctly convert 'ó' from latin-1 to utf-8 and not mangle it. If there isn't, why would sqlite 'highly recommend' I switch my application to unicode strings? I'm going to update this question with a summary and some example code of everything I've learned in the last 24 hours so that someone in my shoes can have an easy(er) guide. If the information I post is wrong or misleading in any way please tell me and I'll update, or one of you senior guys can update. Summary of answers Let me first state the goal as I understand it. The goal in processing various encodings, if you are trying to convert between them, is to understand what your source encoding is, then convert it to unicode using that source encoding, then convert it to your desired encoding. Unicode is a base and encodings are mappings of subsets of that base. utf_8 has room for every character in unicode, but because they aren't in the same place as, for instance, latin_1, a string encoded in utf_8 and sent to a latin_1 console will not look the way you expect. In python the process of getting to unicode and into another encoding looks like: str.decode('source_encoding').encode('desired_encoding') or if the str is already in unicode str.encode('desired_encoding') For sqlite I didn't actually want to encode it again, I wanted to decode it and leave it in unicode format. Here are four things you might need to be aware of as you try to work with unicode and encodings in python. The encoding of the string you want to work with, and the encoding you want to get it to. The system encoding. The console encoding. The encoding of the source file Elaboration: (1) When you read a string from a source, it must have some encoding, like latin_1 or utf_8. In my case, I'm getting strings from filenames, so unfortunately, I could be getting any kind of encoding. Windows XP uses UCS-2 (a Unicode system) as its native string type, which seems like cheating to me. Fortunately for me, the characters in most filenames are not going to be made up of more than one source encoding type, and I think all of mine were either completely latin_1, completely utf_8, or just plain ascii (which is a subset of both of those). So I just read them and decoded them as if they were still in latin_1 or utf_8. It's possible, though, that you could have latin_1 and utf_8 and whatever other characters mixed together in a filename on Windows. Sometimes those characters can show up as boxes, other times they just look mangled, and other times they look correct (accented characters and whatnot). Moving on. (2) Python has a default system encoding that gets set when python starts and can't be changed during runtime. See here for details. Dirty summary ... well here's the file I added: \# sitecustomize.py \# this file can be anywhere in your Python path, \# but it usually goes in ${pythondir}/lib/site-packages/ import sys sys.setdefaultencoding('utf_8') This system encoding is the one that gets used when you use the unicode("str") function without any other encoding parameters. To say that another way, python tries to decode "str" to unicode based on the default system encoding. (3) If you're using IDLE or the command-line python, I think that your console will display according to the default system encoding. I am using pydev with eclipse for some reason, so I had to go into my project settings, edit the launch configuration properties of my test script, go to the Common tab, and change the console from latin-1 to utf-8 so that I could visually confirm what I was doing was working. (4) If you want to have some test strings, eg test_str = "ó" in your source code, then you will have to tell python what kind of encoding you are using in that file. (FYI: when I mistyped an encoding I had to ctrl-Z because my file became unreadable.) This is easily accomplished by putting a line like so at the top of your source code file: # -*- coding: utf_8 -*- If you don't have this information, python attempts to parse your code as ascii by default, and so: SyntaxError: Non-ASCII character '\xf3' in file _redacted_ on line 81, but no encoding declared; see http://www.python.org/peps/pep-0263.html for details Once your program is working correctly, or, if you aren't using python's console or any other console to look at output, then you will probably really only care about #1 on the list. System default and console encoding are not that important unless you need to look at output and/or you are using the builtin unicode() function (without any encoding parameters) instead of the string.decode() function. I wrote a demo function I will paste into the bottom of this gigantic mess that I hope correctly demonstrates the items in my list. Here is some of the output when I run the character 'ó' through the demo function, showing how various methods react to the character as input. My system encoding and console output are both set to utf_8 for this run: '?' = original char <type 'str'> repr(char)='\xf3' '?' = unicode(char) ERROR: 'utf8' codec can't decode byte 0xf3 in position 0: unexpected end of data 'ó' = char.decode('latin_1') <type 'unicode'> repr(char.decode('latin_1'))=u'\xf3' '?' = char.decode('utf_8') ERROR: 'utf8' codec can't decode byte 0xf3 in position 0: unexpected end of data Now I will change the system and console encoding to latin_1, and I get this output for the same input: 'ó' = original char <type 'str'> repr(char)='\xf3' 'ó' = unicode(char) <type 'unicode'> repr(unicode(char))=u'\xf3' 'ó' = char.decode('latin_1') <type 'unicode'> repr(char.decode('latin_1'))=u'\xf3' '?' = char.decode('utf_8') ERROR: 'utf8' codec can't decode byte 0xf3 in position 0: unexpected end of data Notice that the 'original' character displays correctly and the builtin unicode() function works now. Now I change my console output back to utf_8. '?' = original char <type 'str'> repr(char)='\xf3' '?' = unicode(char) <type 'unicode'> repr(unicode(char))=u'\xf3' '?' = char.decode('latin_1') <type 'unicode'> repr(char.decode('latin_1'))=u'\xf3' '?' = char.decode('utf_8') ERROR: 'utf8' codec can't decode byte 0xf3 in position 0: unexpected end of data Here everything still works the same as last time but the console can't display the output correctly. Etc. The function below also displays more information that this and hopefully would help someone figure out where the gap in their understanding is. I know all this information is in other places and more thoroughly dealt with there, but I hope that this would be a good kickoff point for someone trying to get coding with python and/or sqlite. Ideas are great but sometimes source code can save you a day or two of trying to figure out what functions do what. Disclaimers: I'm no encoding expert, I put this together to help my own understanding. I kept building on it when I should have probably started passing functions as arguments to avoid so much redundant code, so if I can I'll make it more concise. Also, utf_8 and latin_1 are by no means the only encoding schemes, they are just the two I was playing around with because I think they handle everything I need. Add your own encoding schemes to the demo function and test your own input. One more thing: there are apparently crazy application developers making life difficult in Windows. #!/usr/bin/env python # -*- coding: utf_8 -*- import os import sys def encodingDemo(str): validStrings = () try: print "str =",str,"{0} repr(str) = {1}".format(type(str), repr(str)) validStrings += ((str,""),) except UnicodeEncodeError as ude: print "Couldn't print the str itself because the console is set to an encoding that doesn't understand some character in the string. See error:\n\t", print ude try: x = unicode(str) print "unicode(str) = ",x validStrings+= ((x, " decoded into unicode by the default system encoding"),) except UnicodeDecodeError as ude: print "ERROR. unicode(str) couldn't decode the string because the system encoding is set to an encoding that doesn't understand some character in the string." print "\tThe system encoding is set to {0}. See error:\n\t".format(sys.getdefaultencoding()), print ude except UnicodeEncodeError as uee: print "ERROR. Couldn't print the unicode(str) because the console is set to an encoding that doesn't understand some character in the string. See error:\n\t", print uee try: x = str.decode('latin_1') print "str.decode('latin_1') =",x validStrings+= ((x, " decoded with latin_1 into unicode"),) try: print "str.decode('latin_1').encode('utf_8') =",str.decode('latin_1').encode('utf_8') validStrings+= ((x, " decoded with latin_1 into unicode and encoded into utf_8"),) except UnicodeDecodeError as ude: print "The string was decoded into unicode using the latin_1 encoding, but couldn't be encoded into utf_8. See error:\n\t", print ude except UnicodeDecodeError as ude: print "Something didn't work, probably because the string wasn't latin_1 encoded. See error:\n\t", print ude except UnicodeEncodeError as uee: print "ERROR. Couldn't print the str.decode('latin_1') because the console is set to an encoding that doesn't understand some character in the string. See error:\n\t", print uee try: x = str.decode('utf_8') print "str.decode('utf_8') =",x validStrings+= ((x, " decoded with utf_8 into unicode"),) try: print "str.decode('utf_8').encode('latin_1') =",str.decode('utf_8').encode('latin_1') except UnicodeDecodeError as ude: print "str.decode('utf_8').encode('latin_1') didn't work. The string was decoded into unicode using the utf_8 encoding, but couldn't be encoded into latin_1. See error:\n\t", validStrings+= ((x, " decoded with utf_8 into unicode and encoded into latin_1"),) print ude except UnicodeDecodeError as ude: print "str.decode('utf_8') didn't work, probably because the string wasn't utf_8 encoded. See error:\n\t", print ude except UnicodeEncodeError as uee: print "ERROR. Couldn't print the str.decode('utf_8') because the console is set to an encoding that doesn't understand some character in the string. See error:\n\t",uee print print "Printing information about each character in the original string." for char in str: try: print "\t'" + char + "' = original char {0} repr(char)={1}".format(type(char), repr(char)) except UnicodeDecodeError as ude: print "\t'?' = original char {0} repr(char)={1} ERROR PRINTING: {2}".format(type(char), repr(char), ude) except UnicodeEncodeError as uee: print "\t'?' = original char {0} repr(char)={1} ERROR PRINTING: {2}".format(type(char), repr(char), uee) print uee try: x = unicode(char) print "\t'" + x + "' = unicode(char) {1} repr(unicode(char))={2}".format(x, type(x), repr(x)) except UnicodeDecodeError as ude: print "\t'?' = unicode(char) ERROR: {0}".format(ude) except UnicodeEncodeError as uee: print "\t'?' = unicode(char) {0} repr(char)={1} ERROR PRINTING: {2}".format(type(x), repr(x), uee) try: x = char.decode('latin_1') print "\t'" + x + "' = char.decode('latin_1') {1} repr(char.decode('latin_1'))={2}".format(x, type(x), repr(x)) except UnicodeDecodeError as ude: print "\t'?' = char.decode('latin_1') ERROR: {0}".format(ude) except UnicodeEncodeError as uee: print "\t'?' = char.decode('latin_1') {0} repr(char)={1} ERROR PRINTING: {2}".format(type(x), repr(x), uee) try: x = char.decode('utf_8') print "\t'" + x + "' = char.decode('utf_8') {1} repr(char.decode('utf_8'))={2}".format(x, type(x), repr(x)) except UnicodeDecodeError as ude: print "\t'?' = char.decode('utf_8') ERROR: {0}".format(ude) except UnicodeEncodeError as uee: print "\t'?' = char.decode('utf_8') {0} repr(char)={1} ERROR PRINTING: {2}".format(type(x), repr(x), uee) print x = 'ó' encodingDemo(x) Much thanks for the answers below and especially to @John Machin for answering so thoroughly.

Read the article

SQLite, python, unicode, and non-utf data

- by Nathan Spears

I started by trying to store strings in sqlite using python, and got the message: sqlite3.ProgrammingError: You must not use 8-bit bytestrings unless you use a text_factory that can interpret 8-bit bytestrings (like text_factory = str). It is highly recommended that you instead just switch your application to Unicode strings. Ok, I switched to Unicode strings. Then I started getting the message: sqlite3.OperationalError: Could not decode to UTF-8 column 'tag_artist' with text 'Sigur Rós' when trying to retrieve data from the db. More research and I started encoding it in utf8, but then 'Sigur Rós' starts looking like 'Sigur RÃ³s' note: My console was set to display in 'latin_1' as @John Machin pointed out. What gives? After reading this, describing exactly the same situation I'm in, it seems as if the advice is to ignore the other advice and use 8-bit bytestrings after all. I didn't know much about unicode and utf before I started this process. I've learned quite a bit in the last couple hours, but I'm still ignorant of whether there is a way to correctly convert 'ó' from latin-1 to utf-8 and not mangle it. If there isn't, why would sqlite 'highly recommend' I switch my application to unicode strings? I'm going to update this question with a summary and some example code of everything I've learned in the last 24 hours so that someone in my shoes can have an easy(er) guide. If the information I post is wrong or misleading in any way please tell me and I'll update, or one of you senior guys can update. Summary of answers Let me first state the goal as I understand it. The goal in processing various encodings, if you are trying to convert between them, is to understand what your source encoding is, then convert it to unicode using that source encoding, then convert it to your desired encoding. Unicode is a base and encodings are mappings of subsets of that base. utf_8 has room for every character in unicode, but because they aren't in the same place as, for instance, latin_1, a string encoded in utf_8 and sent to a latin_1 console will not look the way you expect. In python the process of getting to unicode and into another encoding looks like: str.decode('source_encoding').encode('desired_encoding') or if the str is already in unicode str.encode('desired_encoding') For sqlite I didn't actually want to encode it again, I wanted to decode it and leave it in unicode format. Here are four things you might need to be aware of as you try to work with unicode and encodings in python. The encoding of the string you want to work with, and the encoding you want to get it to. The system encoding. The console encoding. The encoding of the source file Elaboration: (1) When you read a string from a source, it must have some encoding, like latin_1 or utf_8. In my case, I'm getting strings from filenames, so unfortunately, I could be getting any kind of encoding. Windows XP uses UCS-2 (a Unicode system) as its native string type, which seems like cheating to me. Fortunately for me, the characters in most filenames are not going to be made up of more than one source encoding type, and I think all of mine were either completely latin_1, completely utf_8, or just plain ascii (which is a subset of both of those). So I just read them and decoded them as if they were still in latin_1 or utf_8. It's possible, though, that you could have latin_1 and utf_8 and whatever other characters mixed together in a filename on Windows. Sometimes those characters can show up as boxes, other times they just look mangled, and other times they look correct (accented characters and whatnot). Moving on. (2) Python has a default system encoding that gets set when python starts and can't be changed during runtime. See here for details. Dirty summary ... well here's the file I added: \# sitecustomize.py \# this file can be anywhere in your Python path, \# but it usually goes in ${pythondir}/lib/site-packages/ import sys sys.setdefaultencoding('utf_8') This system encoding is the one that gets used when you use the unicode("str") function without any other encoding parameters. To say that another way, python tries to decode "str" to unicode based on the default system encoding. (3) If you're using IDLE or the command-line python, I think that your console will display according to the default system encoding. I am using pydev with eclipse for some reason, so I had to go into my project settings, edit the launch configuration properties of my test script, go to the Common tab, and change the console from latin-1 to utf-8 so that I could visually confirm what I was doing was working. (4) If you want to have some test strings, eg test_str = "ó" in your source code, then you will have to tell python what kind of encoding you are using in that file. (FYI: when I mistyped an encoding I had to ctrl-Z because my file became unreadable.) This is easily accomplished by putting a line like so at the top of your source code file: # -*- coding: utf_8 -*- If you don't have this information, python attempts to parse your code as ascii by default, and so: SyntaxError: Non-ASCII character '\xf3' in file _redacted_ on line 81, but no encoding declared; see http://www.python.org/peps/pep-0263.html for details Once your program is working correctly, or, if you aren't using python's console or any other console to look at output, then you will probably really only care about #1 on the list. System default and console encoding are not that important unless you need to look at output and/or you are using the builtin unicode() function (without any encoding parameters) instead of the string.decode() function. I wrote a demo function I will paste into the bottom of this gigantic mess that I hope correctly demonstrates the items in my list. Here is some of the output when I run the character 'ó' through the demo function, showing how various methods react to the character as input. My system encoding and console output are both set to utf_8 for this run: '?' = original char <type 'str'> repr(char)='\xf3' '?' = unicode(char) ERROR: 'utf8' codec can't decode byte 0xf3 in position 0: unexpected end of data 'ó' = char.decode('latin_1') <type 'unicode'> repr(char.decode('latin_1'))=u'\xf3' '?' = char.decode('utf_8') ERROR: 'utf8' codec can't decode byte 0xf3 in position 0: unexpected end of data Now I will change the system and console encoding to latin_1, and I get this output for the same input: 'ó' = original char <type 'str'> repr(char)='\xf3' 'ó' = unicode(char) <type 'unicode'> repr(unicode(char))=u'\xf3' 'ó' = char.decode('latin_1') <type 'unicode'> repr(char.decode('latin_1'))=u'\xf3' '?' = char.decode('utf_8') ERROR: 'utf8' codec can't decode byte 0xf3 in position 0: unexpected end of data Notice that the 'original' character displays correctly and the builtin unicode() function works now. Now I change my console output back to utf_8. '?' = original char <type 'str'> repr(char)='\xf3' '?' = unicode(char) <type 'unicode'> repr(unicode(char))=u'\xf3' '?' = char.decode('latin_1') <type 'unicode'> repr(char.decode('latin_1'))=u'\xf3' '?' = char.decode('utf_8') ERROR: 'utf8' codec can't decode byte 0xf3 in position 0: unexpected end of data Here everything still works the same as last time but the console can't display the output correctly. Etc. The function below also displays more information that this and hopefully would help someone figure out where the gap in their understanding is. I know all this information is in other places and more thoroughly dealt with there, but I hope that this would be a good kickoff point for someone trying to get coding with python and/or sqlite. Ideas are great but sometimes source code can save you a day or two of trying to figure out what functions do what. Disclaimers: I'm no encoding expert, I put this together to help my own understanding. I kept building on it when I should have probably started passing functions as arguments to avoid so much redundant code, so if I can I'll make it more concise. Also, utf_8 and latin_1 are by no means the only encoding schemes, they are just the two I was playing around with because I think they handle everything I need. Add your own encoding schemes to the demo function and test your own input. One more thing: there are apparently crazy application developers making life difficult in Windows. #!/usr/bin/env python # -*- coding: utf_8 -*- import os import sys def encodingDemo(str): validStrings = () try: print "str =",str,"{0} repr(str) = {1}".format(type(str), repr(str)) validStrings += ((str,""),) except UnicodeEncodeError as ude: print "Couldn't print the str itself because the console is set to an encoding that doesn't understand some character in the string. See error:\n\t", print ude try: x = unicode(str) print "unicode(str) = ",x validStrings+= ((x, " decoded into unicode by the default system encoding"),) except UnicodeDecodeError as ude: print "ERROR. unicode(str) couldn't decode the string because the system encoding is set to an encoding that doesn't understand some character in the string." print "\tThe system encoding is set to {0}. See error:\n\t".format(sys.getdefaultencoding()), print ude except UnicodeEncodeError as uee: print "ERROR. Couldn't print the unicode(str) because the console is set to an encoding that doesn't understand some character in the string. See error:\n\t", print uee try: x = str.decode('latin_1') print "str.decode('latin_1') =",x validStrings+= ((x, " decoded with latin_1 into unicode"),) try: print "str.decode('latin_1').encode('utf_8') =",str.decode('latin_1').encode('utf_8') validStrings+= ((x, " decoded with latin_1 into unicode and encoded into utf_8"),) except UnicodeDecodeError as ude: print "The string was decoded into unicode using the latin_1 encoding, but couldn't be encoded into utf_8. See error:\n\t", print ude except UnicodeDecodeError as ude: print "Something didn't work, probably because the string wasn't latin_1 encoded. See error:\n\t", print ude except UnicodeEncodeError as uee: print "ERROR. Couldn't print the str.decode('latin_1') because the console is set to an encoding that doesn't understand some character in the string. See error:\n\t", print uee try: x = str.decode('utf_8') print "str.decode('utf_8') =",x validStrings+= ((x, " decoded with utf_8 into unicode"),) try: print "str.decode('utf_8').encode('latin_1') =",str.decode('utf_8').encode('latin_1') except UnicodeDecodeError as ude: print "str.decode('utf_8').encode('latin_1') didn't work. The string was decoded into unicode using the utf_8 encoding, but couldn't be encoded into latin_1. See error:\n\t", validStrings+= ((x, " decoded with utf_8 into unicode and encoded into latin_1"),) print ude except UnicodeDecodeError as ude: print "str.decode('utf_8') didn't work, probably because the string wasn't utf_8 encoded. See error:\n\t", print ude except UnicodeEncodeError as uee: print "ERROR. Couldn't print the str.decode('utf_8') because the console is set to an encoding that doesn't understand some character in the string. See error:\n\t",uee print print "Printing information about each character in the original string." for char in str: try: print "\t'" + char + "' = original char {0} repr(char)={1}".format(type(char), repr(char)) except UnicodeDecodeError as ude: print "\t'?' = original char {0} repr(char)={1} ERROR PRINTING: {2}".format(type(char), repr(char), ude) except UnicodeEncodeError as uee: print "\t'?' = original char {0} repr(char)={1} ERROR PRINTING: {2}".format(type(char), repr(char), uee) print uee try: x = unicode(char) print "\t'" + x + "' = unicode(char) {1} repr(unicode(char))={2}".format(x, type(x), repr(x)) except UnicodeDecodeError as ude: print "\t'?' = unicode(char) ERROR: {0}".format(ude) except UnicodeEncodeError as uee: print "\t'?' = unicode(char) {0} repr(char)={1} ERROR PRINTING: {2}".format(type(x), repr(x), uee) try: x = char.decode('latin_1') print "\t'" + x + "' = char.decode('latin_1') {1} repr(char.decode('latin_1'))={2}".format(x, type(x), repr(x)) except UnicodeDecodeError as ude: print "\t'?' = char.decode('latin_1') ERROR: {0}".format(ude) except UnicodeEncodeError as uee: print "\t'?' = char.decode('latin_1') {0} repr(char)={1} ERROR PRINTING: {2}".format(type(x), repr(x), uee) try: x = char.decode('utf_8') print "\t'" + x + "' = char.decode('utf_8') {1} repr(char.decode('utf_8'))={2}".format(x, type(x), repr(x)) except UnicodeDecodeError as ude: print "\t'?' = char.decode('utf_8') ERROR: {0}".format(ude) except UnicodeEncodeError as uee: print "\t'?' = char.decode('utf_8') {0} repr(char)={1} ERROR PRINTING: {2}".format(type(x), repr(x), uee) print x = 'ó' encodingDemo(x) Much thanks for the answers below and especially to @John Machin for answering so thoroughly.

Search Results

Search found 9087 results on 364 pages for 'strong parameters'.

Page 331/364 | < Previous Page | 327 328 329 330 331 332 333 334 335 336 337 338 | Next Page >

- by user12244672

- by KunaalKapoor

- by Charles Lamb

- by Shashidhar Malyala

- by Steve Felts

- by Denis T

- by scoter

- by Mohan Ramanuja

- by Simon Cooper

- by Kevin Smith

- by Phil Factor

- by Sylvain Duloutre

- by Leonid Ganeline

- by Mr Happy

- by Steve Felts

- by bodycountPP

- by Homer_Simpson

- by Allen Gao

- by ??-Oracle

- by Yaneeve

- by Nathan Spears

- by Nathan Spears

< Previous Page | 327 328 329 330 331 332 333 334 335 336 337 338 | Next Page >