Search Results

Search found 9273 results on 371 pages for 'boot repair'.

Page 332/371 | < Previous Page | 328 329 330 331 332 333 334 335 336 337 338 339  | Next Page >

• Cannot get Virtualbox to install properly on Ubuntu 12.04

  - by lopac1029

  I cannot get Virtualbox to install properly on my 12.04. I first went with a manual install for the .deb from the old builds section of the Virtualbox page. That .deb opened up the Software Center and installed. Then I got the error coming up of VT-x/AMD-V hardware acceleration is not available on your system. Your 64-bit guest will fail to detect a 64-bit CPU and will not be able to boot. which I can only assume was due to my Ubuntu version being 32-bit (System Details - Overview - OC type: 32-bit, right?) So I followed these instructions to remove the .deb manually, restarted my laptop, and then FOUND the actual Virtualbox install in the Software Center and installed from that (assuming it would give me the correct version I need for my system) So after all that (and then some), I'm still getting the same error when I connect to my new job's project in Virtualbox. Can anyone point me in the right direction of what to do here? This is the first time I've ever worked with Virtualbox, and no one at this company is using Ubuntu, so I'm on my own here. EDIT: Here is the direct info from running the 2 suggested commands Inspiron-1750-brick:~ $lscpu Architecture: i686 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 2 On-line CPU(s) list: 0,1 Thread(s) per core: 1 Core(s) per socket: 2 Socket(s): 1 Vendor ID: GenuineIntel CPU family: 6 Model: 23 Stepping: 10 CPU MHz: 2100.000 BogoMIPS: 4189.45 L1d cache: 32K L1i cache: 32K L2 cache: 2048K Inspiron-1750-brick:~ $cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Core(TM)2 Duo CPU T6500 @ 2.10GHz stepping : 10 microcode : 0xa07 cpu MHz : 1200.000 cache size : 2048 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm sse4_1 xsave lahf_lm dtherm bogomips : 4189.80 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Core(TM)2 Duo CPU T6500 @ 2.10GHz stepping : 10 microcode : 0xa07 cpu MHz : 1200.000 cache size : 2048 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 initial apicid : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm sse4_1 xsave lahf_lm dtherm bogomips : 4189.45 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management:

  Read the article

• How to install Network Adapter Drivers for Atheros AR8161/8165 PCI-E Gigabit Ethernet Controller (NDIS 6.20) Ubuntu 12.04

  - by Jessica Burnett

  How can I install drivers for 64-bit Atheros AR8161/8165 PCI-E Gigabit Ethernet Controller (NDIS 6.20) for Ubuntu 12.04. I dual boot Windows7/Ubuntu 12.04 drivers work for 64-bit Windows 7. lspic -nn: 00:00.0 Host bridge [0600]: Intel Corporation Ivy Bridge DRAM Controller [8086:0154] (rev 09) 00:01.0 PCI bridge [0604]: Intel Corporation Ivy Bridge PCI Express Root Port [8086:0151] (rev 09) 00:02.0 VGA compatible controller [0300]: Intel Corporation Ivy Bridge Graphics Controller [8086:0166] (rev 09) 00:14.0 USB controller [0c03]: Intel Corporation Panther Point USB xHCI Host Controller [8086:1e31] (rev 04) 00:16.0 Communication controller [0780]: Intel Corporation Panther Point MEI Controller #1 [8086:1e3a] (rev 04) 00:1a.0 USB controller [0c03]: Intel Corporation Panther Point USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) 00:1b.0 Audio device [0403]: Intel Corporation Panther Point High Definition Audio Controller [8086:1e20] (rev 04) 00:1c.0 PCI bridge [0604]: Intel Corporation Panther Point PCI Express Root Port 1 [8086:1e10] (rev c4) 00:1c.1 PCI bridge [0604]: Intel Corporation Panther Point PCI Express Root Port 2 [8086:1e12] (rev c4) 00:1c.3 PCI bridge [0604]: Intel Corporation Panther Point PCI Express Root Port 4 [8086:1e16] (rev c4) 00:1d.0 USB controller [0c03]: Intel Corporation Panther Point USB Enhanced Host Controller #1 [8086:1e26] (rev 04) 00:1f.0 ISA bridge [0601]: Intel Corporation Panther Point LPC Controller [8086:1e59] (rev 04) 00:1f.2 SATA controller [0106]: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] [8086:1e03] (rev 04) 00:1f.3 SMBus [0c05]: Intel Corporation Panther Point SMBus Controller [8086:1e22] (rev 04) 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation Device [10de:0de9] (rev a1) 02:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8161 Gigabit Ethernet [1969:1091] (rev 08) 03:00.0 Network controller [0280]: Intel Corporation Centrino Wireless-N 2200 [8086:0891] (rev c4) 04:00.0 System peripheral [0880]: JMicron Technology Corp. SD/MMC Host Controller [197b:2392] (rev 30) 04:00.2 SD Host controller [0805]: JMicron Technology Corp. Standard SD Host Controller [197b:2391] (rev 30) 04:00.3 System peripheral [0880]: JMicron Technology Corp. MS Host Controller [197b:2393] (rev 30) 04:00.4 System peripheral [0880]: JMicron Technology Corp. xD Host Controller [197b:2394] (rev 30) sudo lshw -c network *-network UNCLAIMED description: Ethernet controller product: AR8161 Gigabit Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:02:00.0 version: 08 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi msix bus_master cap_list configuration: latency=0 resources: memory:d3a00000-d3a3ffff ioport:2000(size=128) *-network description: Wireless interface product: Centrino Wireless-N 2200 vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: c4 serial: 9c:4e:36:14:d4:7c width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-23-generic firmware=18.168.6.1 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:45 memory:d3900000-d3901fff I also tried Manually configuring wired connection. Nether wired or wireless connects

  Read the article

• How to generate xorg.conf? (X -configure segfaults)

  - by Nicolas Raoul

  My video card is working fine, I have no screen problem. I am trying to generate an xorg.conf so I did: [ Logout ] sudo service gdm stop [ Move away xorg.conf.back and xorg.conf.fglrx-0 that were in /etc/X11 ] sudo dpkg-reconfigure xserver-xorg sudo X -configure But this last command segfaults: X.Org X Server 1.7.6 Release Date: 2010-03-17 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-27-server i686 Ubuntu Current Operating System: Linux nico 2.6.32-25-generic #44-Ubuntu SMP Fri Sep 17 20:26:08 UTC 2010 i686 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-25-generic root=UUID=7447ab16-3406-442d-81e5-bb6a2d795205 ro quiet splash Build Date: 21 July 2010 12:47:34PM xorg-server 2:1.7.6-2ubuntu7.3 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 15 16:06:11 2010 List of video drivers: i740 ark geode siliconmotion mach64 s3 r128 apm intel neomagic vesa trident chips s3virge fglrx sis savage rendition i128 tseng ztv mga openchrome radeon ati nv v4l vmware cirrus tdfx nouveau sisusb voodoo fbdev (EE) Can't load FireGL DRM library (libfglrxdrm.so). Backtrace: 0: X (xorg_backtrace+0x3b) [0x80e938b] 1: X (0x8048000+0x61c8d) [0x80a9c8d] 2: (vdso) (__kernel_rt_sigreturn+0x0) [0x34d410] 3: X (xf86CallDriverProbe+0x182) [0x80b82d2] 4: X (DoConfigure+0x1c8) [0x816b898] 5: X (InitOutput+0x1da) [0x80b98aa] 6: X (0x8048000+0x1ebbb) [0x8066bbb] 7: /lib/tls/i686/cmov/libc.so.6 (__libc_start_main+0xe6) [0x467bd6] 8: X (0x8048000+0x1e961) [0x8066961] Segmentation fault at address (nil) Caught signal 11 (Segmentation fault). Server aborting Please consult the The X.Org Foundation support at http://wiki.x.org for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information. ddxSigGiveUp: Closing log Note the line Can't load FireGL DRM library (libfglrxdrm.so) Note: I do have file /usr/lib/fglrx/xorg/modules/linux/libfglrxdrm.so It is strange that it segfaults whereas I can use Gnome with no problem but well... Might be related: I tried to install the driver from ATI's website recently, and from then glxgears crashes at start. How can I generate xorg.conf in those conditions? It might or might not involve solving the segfault problem.

  Read the article

• hostapd running on Ubuntu Server 13.04 only allows single station to connect when using wpa

  - by user450688

  Problem Only a single station can connect to hostapd at a time. Any single station can connect (W8, OSX, iOS, Nexus) but when two or more hosts are connected at the same time the first client loses its connectivity. However there are no connectivity issues when WPA is not used. Setup Linux (Ubuntu server 13.04) wireless router (with separate networks for wired WAN, wired LAN, and Wireless LAN. iptables-save output: *nat :PREROUTING ACCEPT [0:0] :INPUT ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] -A POSTROUTING -s 10.0.0.0/24 -o p4p1 -j MASQUERADE -A POSTROUTING -s 10.0.1.0/24 -o p4p1 -j MASQUERADE COMMIT *mangle :PREROUTING ACCEPT [13:916] :INPUT ACCEPT [9:708] :FORWARD ACCEPT [4:208] :OUTPUT ACCEPT [9:3492] :POSTROUTING ACCEPT [13:3700] COMMIT *filter :INPUT DROP [0:0] :FORWARD DROP [0:0] :OUTPUT ACCEPT [9:3492] -A INPUT -i p4p1 -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -i p4p1 -p tcp -m tcp --dport 22 -m state --state NEW -j ACCEPT -A INPUT -i eth0 -j ACCEPT -A INPUT -i wlan0 -j ACCEPT -A INPUT -i lo -j ACCEPT -A FORWARD -i p4p1 -m state --state RELATED,ESTABLISHED -j ACCEPT -A FORWARD -i eth0 -j ACCEPT -A FORWARD -i wlan0 -j ACCEPT -A FORWARD -i lo -j ACCEPT COMMIT /etc/hostapd/hostapd.conf #Wireless Interface interface=wlan0 driver=nl80211 ssid=<removed> hw_mode=g channel=6 max_num_sta=15 auth_algs=3 ieee80211n=1 wmm_enabled=1 wme_enabled=1 #Configure Hardware Capabilities of Interface ht_capab=[HT40+][SMPS-STATIC][GF][SHORT-GI-20][SHORT-GI-40][RX-STBC12] #Accept all MAC address macaddr_acl=0 #Shared Key Authentication wpa=1 wpa_passphrase=<removed> wpa_key_mgmt=WPA-PSK wpa_pairwise=CCMP rsn_pairwise=CCMP ###IPad Connectivevity Repair ieee8021x=0 eap_server=0 Wireless Card #lshw output product: RT2790 Wireless 802.11n 1T/2R PCIe vendor: Ralink corp. physical id: 0 bus info: pci@0000:03:00.0 logical name: mon.wlan0 version: 00 serial: <removed> width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list logical wireless ethernet physical configuration: broadcast=yes driver=rt2800pci driverversion=3.8.0-25-generic firmware=0.34 ip=10.0.1.254 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn #iw list output Band 1: Capabilities: 0x272 HT20/HT40 Static SM Power Save RX Greenfield RX HT20 SGI RX HT40 SGI RX STBC 2-streams Max AMSDU length: 3839 bytes No DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 2 usec (0x04) HT RX MCS rate indexes supported: 0-15, 32 TX unequal modulation not supported HT TX Max spatial streams: 1 HT TX MCS rate indexes supported may differ Frequencies: * 2412 MHz [1] (27.0 dBm) * 2417 MHz [2] (27.0 dBm) * 2422 MHz [3] (27.0 dBm) * 2427 MHz [4] (27.0 dBm) * 2432 MHz [5] (27.0 dBm) * 2437 MHz [6] (27.0 dBm) * 2442 MHz [7] (27.0 dBm) * 2447 MHz [8] (27.0 dBm) * 2452 MHz [9] (27.0 dBm) * 2457 MHz [10] (27.0 dBm) * 2462 MHz [11] (27.0 dBm) * 2467 MHz [12] (disabled) * 2472 MHz [13] (disabled) * 2484 MHz [14] (disabled) Bitrates (non-HT): * 1.0 Mbps * 2.0 Mbps (short preamble supported) * 5.5 Mbps (short preamble supported) * 11.0 Mbps (short preamble supported) * 6.0 Mbps * 9.0 Mbps * 12.0 Mbps * 18.0 Mbps * 24.0 Mbps * 36.0 Mbps * 48.0 Mbps * 54.0 Mbps max # scan SSIDs: 4 max scan IEs length: 2257 bytes Coverage class: 0 (up to 0m) Supported Ciphers: * WEP40 (00-0f-ac:1) * WEP104 (00-0f-ac:5) * TKIP (00-0f-ac:2) * CCMP (00-0f-ac:4) Available Antennas: TX 0 RX 0 Supported interface modes: * IBSS * managed * AP * AP/VLAN * WDS * monitor * mesh point software interface modes (can always be added): * AP/VLAN * monitor valid interface combinations: * #{ AP } <= 8, total <= 8, #channels <= 1 Supported commands: * new_interface * set_interface * new_key * new_beacon * new_station * new_mpath * set_mesh_params * set_bss * authenticate * associate * deauthenticate * disassociate * join_ibss * join_mesh * set_tx_bitrate_mask * set_tx_bitrate_mask * action * frame_wait_cancel * set_wiphy_netns * set_channel * set_wds_peer * Unknown command (84) * Unknown command (87) * Unknown command (85) * Unknown command (89) * Unknown command (92) * testmode * connect * disconnect Supported TX frame types: * IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * Unknown mode (10): 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 Supported RX frame types: * IBSS: 0x40 0xb0 0xc0 0xd0 * managed: 0x40 0xd0 * AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0 * AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0 * mesh point: 0xb0 0xc0 0xd0 * P2P-client: 0x40 0xd0 * P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0 * Unknown mode (10): 0x40 0xd0 Device supports RSN-IBSS. HT Capability overrides: * MCS: ff ff ff ff ff ff ff ff ff ff * maximum A-MSDU length * supported channel width * short GI for 40 MHz * max A-MPDU length exponent * min MPDU start spacing Device supports TX status socket option. Device supports HT-IBSS.

  Read the article

• CodePlex Daily Summary for Monday, May 26, 2014

  CodePlex Daily Summary for Monday, May 26, 2014Popular ReleasesClosedXML - The easy way to OpenXML: ClosedXML 0.71.1: More performance improvements. It's faster and consumes less memory.Role Based Views in Microsoft Dynamics CRM 2011: Role Based Views in CRM 2011 and 2013 - 1.1.0.0: Issues fixed in this build: 1. Works for CRM 2013 2. Lookup view not getting blockedSimCityPak: SimCityPak 0.3.1.0: Main New Features: Fixed Importing of Instance Names (get rid of the Dutch translations) Added advanced editor for Decal Dictionaries Added possibility to import .PNG to generate new decals Added advanced editor for Path display entriesSimple Connect To Db: SimpleConnectToDb_v1: SimpleConnectToDb_v1CRM 2011 / CRM 2013 Form Helper: v2014.05.25: v2014.05.25 Added PhoneFormat & PhoneFormatAreaCode v2014.05.24 Initial ReleaseCreate Word documents without MS Word: Release 3.0: Add support for Sections, Sections Headers and Footers and right to left languages.Corporate News App for SharePoint 2013: CorporateNewsApp v1.6.2.0: Important note This version contains a major bug fix about the generic error "Request failed. Unexpected response data from server null" This error occurs on SharePoint Online only, following an update of the Javascript API after May 2014. If you have installed this application manually in your applications company catalog, you can download the CorporateNewsApp.app file in the zip archive and update it manually. If you have installed this application directly from the SharePoint Store, it ...DevOS: DevOS: Plugin-system added Including:DevOS.exe DevOS API.dll Files must be in the some folderTiny Deduplicator: Tiny Deduplicator 1.0.1.0: Increased version number to 1.0.1.0 Moved all options to a separate 'Options' dialog window. Allows the user to specify a selection strategy which will help when dealing with large numbers of duplicate files. Available options are "None," "Keep First," and "Keep Last"C64 Studio: 3.5: Add: BASIC renumber function Add: !PET pseudo op Add: elseif for !if, } else { pseudo op Add: !TRACE pseudo op Add: Watches are saved/restored with a solution Add: Ctrl-A works now in export assembly controls Add: Preliminary graphic import dialog (not fully functional yet) Add: range and block selection in sprite/charset editor (Shift-Click = range, Alt-Click = block) Fix: Expression evaluator could miscalculate when both division and multiplication were in an expression without parenthesisSEToolbox: SEToolbox 01.031.009 Release 1: Added mirroring of ConveyorTubeCurved. Updated Ship cube rotation to rotate ship back to original location (cubes are reoriented but ship appears no different to outsider), and to rotate Grouped items. Repair now fixes the loss of Grouped controls due to changes in Space Engineers 01.030. Added export asteroids. Rejoin ships will merge grouping and conveyor systems (even though broken ships currently only maintain the Grouping on one part of the ship). Installation of this version wi...Player Framework by Microsoft: Player Framework for Windows and WP v2.0: Support for new Universal and Windows Phone 8.1 projects for both Xaml and JavaScript projects. See a detailed list of improvements, breaking changes and a general overview of version 2 ADDITIONAL DOWNLOADSSmooth Streaming Client SDK for Windows 8 Applications Smooth Streaming Client SDK for Windows 8.1 Applications Smooth Streaming Client SDK for Windows Phone 8.1 Applications Microsoft PlayReady Client SDK for Windows 8 Applications Microsoft PlayReady Client SDK for Windows 8.1 Applicat...TerraMap (Terraria World Map Viewer): TerraMap 1.0.6: Added support for the new Terraria v1.2.4 update. New items, walls, and tiles Added the ability to select multiple highlighted block types. Added a dynamic, interactive highlight opacity slider, making it easier to find highlighted tiles with dark colors (and fixed blurriness from 1.0.5 alpha). Added ability to find Enchanted Swords (in the stone) and Water Bolt books Fixed Issue 35206: Hightlight/Find doesn't work for Demon Altars Fixed finding Demon Hearts/Shadow Orbs Fixed inst...DotNet.Highcharts: DotNet.Highcharts 4.0 with Examples: DotNet.Highcharts 4.0 Tested and adapted to the latest version of Highcharts 4.0.1 Added new chart type: Heatmap Added new type PointPlacement which represents enumeration or number for the padding of the X axis. Changed target framework from .NET Framework 4 to .NET Framework 4.5. Closed issues: 974: Add 'overflow' property to PlotOptionsColumnDataLabels class 997: Split container from JS 1006: Series/Categories with numeric names don't render DotNet.Highcharts.Samples Updated s...ConEmu - Windows console with tabs: ConEmu 140523 [Alpha]: ConEmu - developer build x86 and x64 versions. Written in C++, no additional packages required. Run "ConEmu.exe" or "ConEmu64.exe". Some useful information you may found: http://superuser.com/questions/tagged/conemu http://code.google.com/p/conemu-maximus5/wiki/ConEmuFAQ http://code.google.com/p/conemu-maximus5/wiki/TableOfContents If you want to use ConEmu in portable mode, just create empty "ConEmu.xml" file near to "ConEmu.exe" Aspose for Apache POI: Missing Features of Apache POI SL - v 1.1: Release contain the Missing Features in Apache POI SL SDK in Comparison with Aspose.Slides for dealing with Microsoft Power Point. What's New ?Following Examples: Managing Slide Transitions Manage Smart Art Adding Media Player Adding Audio Frame to Slide Feedback and Suggestions Many more examples are yet to come here. Keep visiting us. Raise your queries and suggest more examples via Aspose Forums or via this social coding site.PowerShell App Deployment Toolkit: PowerShell App Deployment Toolkit v3.1.3: Added CompressLogs option to the config file. Each Install / Uninstall creates a timestamped zip file with all MSI and PSAppDeployToolkit logs contained within Added variable expansion to all paths in the configuration file Added documentation for each of the Toolkit internal variables that can be used Changed Install-MSUpdates to continue if any errors are encountered when installing updates Implement /Force parameter on Update-GroupPolicy (ensure that any logoff message is ignored) ...WordMat: WordMat v. 1.07: A quick fix because scientific notation was broken in v. 1.06 read more at http://wordmat.blogspot.com????: 《????》: 《????》（c???）??“????”???????，???????????????C?????????。???????,???????????????????????. ??????????????????????????????????；????????????????????????????。Mini SQL Query: Mini SQL Query (1.0.72.457): Apologies for the previous update! FK issue fixed and also a template data cache issue.New ProjectsASP.Net MCV4 Simplified Code Samples: This project intended to simplify the same. In this project each task is implemented with minimum lines of code to reduces complicity.Calvin: net???CodeLatino by Latinosoft: A Modified version for codeShow -- Probably taking more than a month.freeasyBackup: A free and easy to use Backup Tool for everyone. Without any cloud restrictions. freeasyExplorer: A free and easy to use File Explorer for everyone.openPDFspeedreader: #spritz #pdfreader #speedreader PDF Editor to Edit PDF Files in your ASP.NET Applications: This sample application allows the users to edit PDF files online using Aspose.Pdf for .NET.SharePoint World Cup 2013: world cup 2014SSAS Long Running Query Performance Helper: This utility helps investigate long running multidimensional or mining queries in discovery, de-parameterization and re-parameterization back to source format.

  Read the article

• Wireless Broadcom 4313 not working on Ubuntu 12.04

  - by user88568

  It seems a lot of people are having this problem, but none of the posted solutions have worked for me so far. My driver is installed and activated, I have tried removing and re-adding the network, and various other fixes. No networks were picked up on my first boot, the next day wireless worked fine, and since then it does not detect networks, and when I manually try to connect, it repeatedly asks for the password and does not connect. Here's my info: 03:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) Subsystem: Dell Inspiron M5010 / XPS 8300 Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at f0500000 (64-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Capabilities: [58] Vendor Specific Information: Len=78 Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [d0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [13c] Virtual Channel Capabilities: [160] Device Serial Number 00-00-a1-ff-ff-f3-70-f1 Capabilities: [16c] Power Budgeting Kernel driver in use: wl Kernel modules: wl, bcma, brcmsmac root@michelle-laptop:/home/michelle# ifconfig eth0 Link encap:Ethernet HWaddr 70:f1:a1:f3:ba:ab inet6 addr: fe80::72f1:a1ff:fef3:baab/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:29 TX packets:0 errors:30 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:17 eth1 Link encap:Ethernet HWaddr f0:4d:a2:53:83:7a UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:43 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:104 errors:0 dropped:0 overruns:0 frame:0 TX packets:104 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:8000 (8.0 KB) TX bytes:8000 (8.0 KB) root@michelle-laptop:/home/michelle# lsmod Module Size Used by dm_crypt 22528 0 snd_hda_codec_hdmi 31775 1 snd_hda_codec_realtek 174313 1 snd_hda_intel 32765 5 snd_hda_codec 109562 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec snd_pcm 80845 4 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13132 0 snd_rawmidi 25424 1 snd_seq_midi snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event parport_pc 32114 0 ppdev 12849 0 binfmt_misc 17292 1 lib80211_crypt_tkip 17275 0 bnep 17830 2 rfcomm 38139 0 snd_timer 28931 2 snd_pcm,snd_seq snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq joydev 17393 0 wl 2646601 0 snd 62064 19 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 14635 1 snd btusb 17912 0 bluetooth 158438 11 bnep,rfcomm,btusb uvcvideo 67203 0 videodev 86588 1 uvcvideo snd_page_alloc 14108 2 snd_hda_intel,snd_pcm lib80211 14040 2 lib80211_crypt_tkip,wl intel_ips 17822 0 psmouse 72919 0 serio_raw 13027 0 mei 36570 0 dell_laptop 17767 0 dell_wmi 12601 0 dcdbas 14098 1 dell_laptop sparse_keymap 13658 1 dell_wmi mac_hid 13077 0 lp 17455 0 parport 40930 3 parport_pc,ppdev,lp usbhid 41906 0 hid 77367 1 usbhid wmi 18744 1 dell_wmi i915 414817 3 atl1c 36718 0 drm_kms_helper 45466 1 i915 drm 197692 4 i915,drm_kms_helper i2c_algo_bit 13199 1 i915 video 19068 1 i915 root@michelle-laptop:/home/michelle# iwlist scan lo Interface doesn't support scanning. eth1 Interface doesn't support scanning. eth0 No scan results root@michelle-laptop:/home/michelle# rfkill list 0: dell-wifi: Wireless LAN Soft blocked: no Hard blocked: no 1: dell-bluetooth: Bluetooth Soft blocked: yes Hard blocked: no 3: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: no Obviously I don't know what I'm doing. I'd appreciate any help! Thanks!

  Read the article

• Friday Fun: Destroy the Web

  - by Mysticgeek

  Another Friday has arrived and it’s time to screw off on company time. Today we take a look at a unique game Add-on for Firefox called Destroy the Web. Destroy the Web Once you install the Add-on and restart Firefox, you’ll see the Destroy the Web icon on the toolbar. Click on it to destroy whatever webpage you’re on.   The game starts up and gives you a 3 second countdown… Now move the target over different elements of the page to destroy them. You have 30 seconds to destroy the site contents. If you are angry at a particular company or the one you work for, this can give you some fun stress relief by destroying it’s website. After you’ve destroyed as much of the page as possible, you’re given a score. You get different amounts of points for destroying certain elements on the page. Basically destroy as much as possible to get the most points. You can submit your score and check out some of the scoreboard leaders as well.  There are some cool sound effects and arcade sounding background music, so make sure to turn the volume down while playing. Or you can go into the Add-on options and disable it. If you want a unique way to let off some steam before the weekend starts, this is a fun way of doing it. Install Destroy the Web for Firefox Similar Articles Productive Geek Tips Friday Fun: Destroy Everything with Indestructo TankWeekend Fun: Easter Egg in Spybot Search & DestroyFriday Fun: BoombotSecure Computing: Create Scheduled Scans With Spybot Search & DestroyFriday Fun: Castle Game Collection TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Dual Boot Ubuntu and Windows 7 What is HTML5? Default Programs Editor – One great tool for Setting Defaults Convert BMP, TIFF, PCX to Vector files with RasterVect Free Identify Fonts using WhatFontis.com Windows 7’s WordPad is Actually Good

  Read the article

• Ubuntu 14.04 : Lost my sound randomly tried a few commands and I think I failed

  - by Marc-Antoine Théberge

  I lost my sound the other day and I tried to delete pulseaudio then reinstall, then I tried to delete it and install alsa, It did not work and I had to reinstall everything; overall bad idea... now I can't have any sound. Should I do a fresh install? I don't know how to boot an usb drive with GRUB... Here's my sysinfo System information report, generated by Sysinfo: 2014-05-28 05:45:58 http://sourceforge.net/projects/gsysinfo SYSTEM INFORMATION Running Ubuntu Linux, the Ubuntu 14.04 (trusty) release. GNOME: 3.8.4 (Ubuntu 2014-03-17) Kernel version: 3.13.0-27-generic (#50-Ubuntu SMP Thu May 15 18:08:16 UTC 2014) GCC: 4.8 (i686-linux-gnu) Xorg: 1.15.1 (16 April 2014 01:40:08PM) (16 April 2014 01:40:08PM) Hostname: mark-laptop Uptime: 0 days 11 h 43 min CPU INFORMATION GenuineIntel, Intel(R) Atom(TM) CPU N270 @ 1.60GHz Number of CPUs: 2 CPU clock currently at 1333.000 MHz with 512 KB cache Numbering: family(6) model(28) stepping(2) Bogomips: 3192.13 Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 xtpr pdcm movbe lahf_lm dtherm MEMORY INFORMATION Total memory: 2007 MB Total swap: 1953 MB STORAGE INFORMATION SCSI device - scsi0 Vendor: ATA Model: ST9160310AS HARDWARE INFORMATION MOTHERBOARD Host bridge Intel Corporation Mobile 945GSE Express Memory Controller Hub (rev 03) Subsystem: ASUSTeK Computer Inc. Device 8340 PCI bridge(s) Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode]) Intel Corporation NM10/ICH7 Family PCI Express Port 2 (rev 02) (prog-if 00 [Normal decode]) Intel Corporation NM10/ICH7 Family PCI Express Port 4 (rev 02) (prog-if 00 [Normal decode]) Intel Corporation 82801 Mobile PCI Bridge (rev e2) (prog-if 01 [Subtractive decode]) Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode]) Intel Corporation NM10/ICH7 Family PCI Express Port 2 (rev 02) (prog-if 00 [Normal decode]) Intel Corporation NM10/ICH7 Family PCI Express Port 4 (rev 02) (prog-if 00 [Normal decode]) Intel Corporation 82801 Mobile PCI Bridge (rev e2) (prog-if 01 [Subtractive decode]) ISA bridge Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) Subsystem: ASUSTeK Computer Inc. Device 830f IDE interface Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode] (rev 02) (prog-if 80 [Master]) Subsystem: ASUSTeK Computer Inc. Device 830f GRAPHIC CARD VGA controller Intel Corporation Mobile 945GSE Express Integrated Graphics Controller (rev 03) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device 8340 SOUND CARD Multimedia controller Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02) Subsystem: ASUSTeK Computer Inc. Device 831a NETWORK Ethernet controller Qualcomm Atheros AR8121/AR8113/AR8114 Gigabit or Fast Ethernet (rev b0) Subsystem: ASUSTeK Computer Inc. Device 8324

  Read the article

• SCHA API for resource group failover / switchover history

  - by krishna.k.murthy

  The Oracle Solaris Cluster framework keeps an internal log of cluster events, including switchover and failover of resource groups. These logs can be useful to Oracle support engineers for diagnosing cluster behavior. However, till now, there was no external interface to access the event history. Oracle Solaris Cluster 4.2 provides a new API option for viewing the recent history of resource group switchovers in a program-parsable format. Oracle Solaris Cluster 4.2 provides a new option tag argument RG_FAILOVER_LOG for the existing API command scha_cluster_get which can be used to list recent failover / switchover events for resource groups. The command usage is as shown below: # scha_cluster_get -O RG_FAILOVER_LOG number_of_days number_of_days : the number of days to be considered for scanning the historical logs. The command returns a list of events in the following format. Each field is separated by a semi-colon [;]: resource_group_name;source_nodes;target_nodes;time_stamp source_nodes: node_names from which resource group is failed over or was switched manually. target_nodes: node_names to which the resource group failed over or was switched manually. There is a corresponding enhancement in the C API function scha_cluster_get() which uses the SCHA_RG_FAILOVER_LOG query tag. In the example below geo-infrastructure (failover resource group), geo-clusterstate (scalable resource group), oracle-rg (failover resource group), asm-dg-rg (scalable resource group) and asm-inst-rg (scalable resource group) are part of Geographic Edition setup. # /usr/cluster/bin/scha_cluster_get -O RG_FAILOVER_LOG 3 geo-infrastructure;schost1c;;Mon Jul 21 15:51:51 2014 geo-clusterstate;schost2c,schost1c;schost2c;Mon Jul 21 15:52:26 2014 oracle-rg;schost1c;;Mon Jul 21 15:54:31 2014 asm-dg-rg;schost2c,schost1c;schost2c;Mon Jul 21 15:54:58 2014 asm-inst-rg;schost2c,schost1c;schost2c;Mon Jul 21 15:56:11 2014 oracle-rg;;schost2c;Mon Jul 21 15:58:51 2014 geo-infrastructure;;schost2c;Mon Jul 21 15:59:19 2014 geo-clusterstate;schost2c;schost2c,schost1c;Mon Jul 21 16:01:51 2014 asm-inst-rg;schost2c;schost2c,schost1c;Mon Jul 21 16:01:10 2014 asm-dg-rg;schost2c;schost2c,schost1c;Mon Jul 21 16:02:10 2014 oracle-rg;schost2c;;Tue Jul 22 16:58:02 2014 oracle-rg;;schost1c;Tue Jul 22 16:59:05 2014 oracle-rg;schost1c;schost1c;Tue Jul 22 17:05:33 2014 Note that in the output some of the entries might have an empty string in the source_nodes. Such entries correspond to events in which the resource group is switched online manually or during a cluster boot-up. Similarly, an empty destination_nodes list indicates an event in which the resource group went offline. - Arpit Gupta, Harish Mallya

  Read the article

• Media server...serving files...............for a limited time only

  - by Craig

  I’m new to Ubuntu and am seeking help with a media server I have built. I have a couple of HTPCs in my house running XBMC. I wanted to build one for the family room working double duty as a HTPC, and media server to share movies, TV shows, music, etc. on my Windows network. So using some spare old parts I had lying around I decided to go CRAZY and build my first Linux box. I used Ubuntu because it seemed to be the most user friendly variant, especially for people that are new to Linux. I had to do a few things to get the media files shared properly on my network: Made sure my two media drives auto-mount every time I boot the computer by editing the “fstab” file – “sudo nano /etc/fstab” Installed Samba - “sudo apt-get install samba” Set a password for Samba - “sudo smbpasswd –a USERNAME” Edited the Samba configuration file to make sure the computer was in my networks workgroup – “sudo nano /etc/samba/smb.conf” In the file manager (not sure if that’s the right name for it), I right-clicked my media folders and set the sharing and permissions. The sharing was done without guest access, and permissions were set to; Owner, Group, and Others - Access: Create and Delete Files. Adjusted the Power Management settings to never put the system into sleep mode. I checked to see if I had access to the files from a Windows 7 machine and I did (Woo Hoo!). But when I tried to play any of my video files from the Windows machine (using VLC media player), they would only play for about 2-5 minutes and then they would stop with an error message saying that the file could not be accessed (Booo...). I tried playing some files through XBMC running in Windows and they worked for a bit longer (about 10-15mins), but they also stopped playing. I installed the Linux version of XBMC on the server and played the files locally with no problems. It doesn’t seem to be an issue with the files themselves, it seems to be a sharing problem on my network. So my question to the Ubuntu gurus out there is: Did I miss adding/editing something in the Samba configuration file? Did I use the right method to share my media files (file manager vs. using the terminal)? Is it possible for the computer to still go to sleep without the screen going black (does that even make sense?). Are there any special settings in Ubuntu that I should be using since this computer as a media server (is there a media server mode?...!...?). Any help on this matter would be greatly appreciated. Thanks

  Read the article

• Stop trying to be perfect

  - by Kyle Burns

  Yes, Bob is my uncle too.  I also think the points in the Manifesto for Software Craftsmanship (manifesto.softwarecraftsmanship.org) are all great.  What amazes me is that tend to confuse the term “well crafted” with “perfect”.  I'm about to say something that will make Quality Assurance managers and many development types as well until you think about it as a craftsman – “Stop trying to be perfect”. Now let me explain what I mean.  Building software, as with building almost anything, often involves a series of trade-offs where either one undesired characteristic is accepted as necessary to achieve another desired one (or maybe stave off one that is even less desirable) or a desirable characteristic is sacrificed for the same reasons.  This implies that perfection itself is unattainable.  What is attainable is “sufficient” and I think that this really goes to the heart both of what people are trying to do with Agile and with the craftsmanship movement.  Simply put, sufficient software drives the greatest business value.   I've been in many meetings where “how can we keep anything from ever going wrong” has become the thing that holds us in analysis paralysis.  I've also been the guy trying way too hard to perfect some function to make sure that every edge case is accounted for.  Somewhere in there, something a drill instructor said while I was in boot camp occurred to me.  In response to being asked a question by another recruit having to do with some edge case (I can barely remember the context), he said “What if grasshoppers had machine guns?  Would the birds still **** with them?”  It sounds funny, but there's a lot of wisdom in those words.   “Sufficient” is different for every situation and it’s important to understand what sufficient means in the context of the work you’re doing.  If I’m writing a timesheet application (and please shoot me if I am), I’m going to have a much higher tolerance for imperfection than if you’re writing software to control life support systems on spacecraft.  I’m also likely to have less need for high volume performance than if you’re writing software to control stock trading transactions.   I’d encourage anyone who has read this far to instead of trying to be perfect, try to create software that is sufficient in every way.  If you’re working to make a component that is sufficient “better”, ask yourself if there is any component left that is not yet sufficient.  If the answer is “yes” you’re working on the wrong thing and need to adjust.  If the answer is “no”, why aren’t you shipping and delivering business value?

  Read the article

• How migrate my keyring (containing ssh passprases, nautilus remote filesystem, pgp passwords) and network manager connections?

  - by con-f-use

  I changed the disk on my laptop and installed Ubuntu on the new disk. Old disk had 12.04 upgraded to 12.10 on it. Now I want to copy my old keyring with WiFi passwords, ftp passwords for nautilus and ssh key passphrases. I have the whole data from the old disk available (is now a USB disk and I did not delete the old data yet or do anything with it - I could still put it in the laptop and boot from it like nothing happened). On the new disc that is now in my laptop, I have installed 12.10 with the same password, user-id and username as on the old disk. Then I copied a few important config files from the old disk (e.g. ~/.firefox/, ~/.mozilla, ~/.skype and so on, which all worked fine... except for the key ring: The old methods of just copying ~/.gconf/... and ~/.gnome2/keyrings won't work. Did I miss something? 1. Edit: I figure one needs to copy files not located in the users home directory as well. I copied the whole old /home/confus (which is my home directory) to the fresh install to no effect. That whole copy is now reverted to the fresh install's home directory, so my /home/confus is as it was the after fresh install. 2. Edit: The folder /etc/NetworkManager/system-connections seems to be the place for WiFi passwords. Could be that /usr/share/keyrings is important as well for ssh keys - that's the only sensible thing that a search came up with: find /usr/ -name "*keyring* 3. Edit: Still no ssh and ftp passwords from the keyring. What I did: Convert old hard drive to usb drive Put new drive in the laptop and installed fresh version of 12.10 there (same uid, username and passwort) Booted from old hdd via USB and copied its /etc/NetwrokManager/system-connections, ~/.gconf/ and ~/.gnome2/keyrings, ~/.ssh over to the new disk. Confirmed that all keys on the old install work Booted from new disk Result: No passphrase for ssh keys, no ftp passwords in keyring. At least the WiFi passwords are migrated. 4. Edit: Boutny! Ending soon... 5. Edit: Keyring's now in ./local/share/keyrings/. Also interesting .gnupg

  Read the article

• 12.04 boots fine, with graphical splash screen, but then Monitor "out of range"

  - by Jim Bednar

  I see dozens of posts from people whose monitors are saying "out of range" under Ubuntu; seems like there are some serious problems in Ubuntu with autodetection of monitor capabilities. :-( But none of the many, many suggestions I found have solved my problem, and right now I can't use anything graphical on this machine! History: I installed Ubuntu 12.04 on my HP Proliant Microserver N40L, which worked reasonably at the default resolution across several reboots. At some point I noticed that the proprietary video driver was not in use, and tried to install one to get better window-drawing speeds, but it failed with some sort of error, and I gave up on that. A few weeks later when I next rebooted, it showed the usual BIOS screen and various boot loading screens (including GRUB), and then the usual purple Ubuntu splash screen with the dots showing that things were loading, but when it finished booting the monitor went black and eventually showed "Out of range" (with no other information). Given that there were several weeks between reboots (it's a server, after all), I've no idea if it was some system update, trying to install the proprietary drivers, or something else that caused the problem. Anyway, the system has booted fine, as I can do Ctrl-Alt-F1 to get a text prompt and can log in there. But Ctrl-Alt-F7 goes back to the out of range error. Some posters said to try Ctrl-Alt-- (minus) to cycle through resolutions until one works, but that didn't have any visible effect. Many, many others said it was a grub problem, which seems unlikely given that grub's screen looks fine, but I tried editing /etc/default/grub to set a particular resolution (trying many of them) and running update-grub, with no apparent effect. Rebooting into failsafe mode works the same as regular mode. Replacing xorg.conf with xorg.conf.failsafe works the same too. I'm at my wits' end! Isn't there anything I can do to convince Ubuntu to choose a mode that the monitor supports? E.g. the one that it is using for the splash screen? I don't need great resolution on this machine, just anything that works!!!!! Help!!!!!! Please!!!!

  Read the article

• Ubuntu won't connect to wired network

  - by djeikyb

  I'm running 10.04, upgraded from 9.10, maybe, but probably not upgraded from 9.04. I have two wifi routers. Zeus is connected to the dsl modem. Hermes uses a wds bridge with Zeus to extend the network. My desktop (Daedalus) is ethernetted to Hermes. My laptop (Clyde) is wifi, switching to Hermes or Zeus as needed. Occasionally, as in whenever I transfer a large file from desktop to laptop, the wds bridge will die. Fixing it means restarting both routers, though it seems Hermes should boot first. This is ridiculous, and eventually I'll get around to asking you guys to help me stop it from happening. More importantly is that my desktop requires a reboot to get back on the network. WTF. ifconfig shows my nic has no ip. /etc/init.d/networking restart doesn't do anything, not even give me a lousy ip. dhcpcd eth1 grants me an ip address, but doesn't help with internet access. route -n shows what looks like my normal routing table, but pinging google.com informs me it's an unknown host. jake@daedalus:~$ route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.1.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1 0.0.0.0 10.1.1.1 0.0.0.0 UG 0 0 0 eth1 It may be worth noting that I can ping both Zeus (10.1.1.1) and Hermes (10.1.1.4) and my laptop (10.1.1.55). Much obliged for any help. Rebooting is, well, trivial in this instance. But it's stupid. I switched to linux because I like the idea that if one part breaks, you fix it instead of reboot reboot reboot. I've left my poor desktop in disarray, confining myself to my little netbook. My desktop is broken, awaiting magical commands from you brilliant folk. (and yes, i know clyde the netbook should be named icarus. it was its original name. ironically the ssd burned out, and i felt it wasn't right when it came to reinstalling)

  Read the article

• HDMI sound gone, can't figure out how to turn it back on

  - by Oli

  I have had an Acer Revo box as a media centre for a while. I recently installed Ubuntu Server (10.10) on it and polished it up with nodm (one of the most simple ways to launch an X session) and installed boxee. It's been working fine for over a month. It's just running ALSA. I've had problems with PulseAudio/Boxee/HDMI before so I wanted to keep it simple. And that worked. It pushed both PCM and digital (AAC and various Dolby codecs) over HDMI perfectly. But I restarted it the other day after mucking around with some nfs configuration and now there isn't any sound. The hardware is an ION chipset. Nvidia 9400M graphics with Nvidia MCP79/7A audio. One thing I have noticed is there doesn't appear to be any sign of a IEC958 device. A traditional fix in the past for fresh installs has been to load alsamixer, find the IEC device and toggle its mute but I can't. I'm certain this used to represent the HDMI output. It just doesn't seem to exist any more unless I run sudo alsa-utils restart while boxee is running, when I see it in an error message: * Shutting down ALSA... [ OK ] * Setting up ALSA... * warning: 'alsactl restore' failed with error message 'alsactl: set_control:1388: Cannot write control '2:0:0:IEC958 Playback Default:0' : Operation not permitted'... ...done. When nodm (and thus boxee) aren't running, I don't see this error but alsamixer still doesn't show the IEC channel. aplay -l gives: card 0: NVidia [HDA NVidia], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0] Subdevices: 0/1 Subdevice #0: subdevice #0 Its section in lshw reads: *-multimedia description: Audio device product: MCP79 High Definition Audio vendor: nVidia Corporation physical id: 8 bus info: pci@0000:00:08.0 version: b1 width: 32 bits clock: 66MHz capabilities: pm bus_master cap_list configuration: driver=HDA Intel latency=0 maxlatency=5 mingnt=2 resources: irq:22 memory:fae78000-fae7bfff I was running on the stock PAE kernel but now it's running on 2.6.37.1. I upgraded to see if that fixed things; it didn't. I'm considering a reinstall but I hate doing that because a) there's a bit of custom configuration in getting X and Boxee to start on boot and b) I don't know what the problem is. If I reinstall this time, I'll end up doing that every time the sound breaks. I love Ubuntu but I don't want to install it once a month. Is there any way to forcibly reset all alsa settings and restart from scratch (without doing a reinstall)? Any other tips? If you need more information, just ask.

  Read the article

• Unable to Mount an external hard drive (NTFS)

  - by Mediterran81

  Ubuntu 11.10. When I plug my external Drive Western Digital MyPassport (500Go NTFS) I named WD. I get the following error: Unable to mount WD Error mounting: mount exited with exit code 1: helper failed with: mount: according to mtab, /dev/sdb1 is already mounted on /media/WD mount failed I have no problem with the internal NTFS partitions that auto-mounts on startup (ntfs-config does that). If I plug the WD before I boot Ubuntu, upon login, it's recognized and I can access without no problem. But if I remove it using (Safely remove) and then replug it, I get the error above. Here is my fstab: # /etc/fstab: static file system information. # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 #Entry for /dev/sda5 : UUID=24540d0f-5803-493c-ace9-e3b3c0cedb26 / ext4 errors=remount-ro 0 1 #Entry for /dev/sda3 : UUID=E4C43F7EC43F51D2 /media/OS ntfs-3g defaults,locale=en_US.UTF-8 0 0 #Entry for /dev/sda2 : UUID=6A0070F10070C61B /media/RECOVERY ntfs-3g defaults,locale=en_US.UTF-8 0 0 #Entry for /dev/sdb1 : UUID=EA6854D268549F5F /media/WD ntfs-3g defaults,nosuid,nodev,locale=en_US.UTF-8 0 0 #Entry for /dev/sda6 : UUID=ed077c52-c50e-406c-9120-9cb6f86ec204 none swap sw 0 0 Here is my mtab /dev/sda5 / ext4 rw,errors=remount-ro,commit=0 0 0 proc /proc proc rw,noexec,nosuid,nodev 0 0 sysfs /sys sysfs rw,noexec,nosuid,nodev 0 0 fusectl /sys/fs/fuse/connections fusectl rw 0 0 none /sys/kernel/debug debugfs rw 0 0 none /sys/kernel/security securityfs rw 0 0 udev /dev devtmpfs rw,mode=0755 0 0 devpts /dev/pts devpts rw,noexec,nosuid,gid=5,mode=0620 0 0 tmpfs /run tmpfs rw,noexec,nosuid,size=10%,mode=0755 0 0 none /run/lock tmpfs rw,noexec,nosuid,nodev,size=5242880 0 0 none /run/shm tmpfs rw,nosuid,nodev 0 0 /dev/sda3 /media/OS fuseblk rw,nosuid,nodev,allow_other,blksize=4096 0 0 /dev/sda2 /media/RECOVERY fuseblk rw,nosuid,nodev,allow_other,blksize=4096 0 0 /dev/sdb1 /media/WD fuseblk rw,nosuid,nodev,allow_other,blksize=4096 0 0 binfmt_misc /proc/sys/fs/binfmt_misc binfmt_misc rw,noexec,nosuid,nodev 0 0 gvfs-fuse-daemon /home/hanine/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,user=hanine 0 0 Appearently it cannot be mounted because upon login, it finds that it is already mounted. Some sort of conflict. Does anyone have a clue on how to solve this. Thanks.

  Read the article

• Live CD has black screen HP DV6

  - by Shaun Killingbeck

  Attempting to install/try ubuntu (11.10, 12.04) on my new laptop, using a liveCD (and tried USB). I get the purple screen (with the man/keyboard at the bottom) and after that the screen flashes bright white before going black. Ubuntu continues to load in the background, with login sound etc but the screen is off. I have tried as many different solutions as I could find including: using nomodestep, xforcevesa, i915.modeset=0, and also now i915.modeset=1 in boot options (seperately): varying consequences, but either I end up at a blinking cursor with no prompt, a command line (startx fails: no screen found), or the original blank screen again Tried booting from VirtualBox - it crashes at the same place the screen would go blank when using a CD/USB tried 11.04: I don't have this problem BUT when trying to install, I get a ubi-partman error 141 (possibly down to the three partitions that came on my laptop... not sure why HP needed there own separate partition for HP Tools...) Model: HP Pavillion DV6 6B08SA Processor: AMD Quad-Core A6-3410MX APU with Radeon HD 6545G2 Dual Graphics (1.6 GHZ 4 MB L2 cache ) Chipset: AMD RS880M Any help would be greatly appreciated. I just want to be able to partition the drive and install Ubuntu. I'm assuming the issue is graphics card related, although I have no confirmation of that. Update: Tried the ?orkarounds on https://wiki.ubuntu.com/X/Troubleshooting/BlankScreen - set gfxpayload=text changed nothing, removing splash did nothing and setting vesafb.nonsense=1 did nothing either. I'd like to be able to collect some log information somehow, but I can't get to a command line from the liveCD. tried using the latest 12.04 beta, same issue tried nomodeset without splash or quiet. get the following (tail of) output before it freezes on that screen: * Starting configure network device security [OK] * Starting configure network device [OK] [ 25.720899] ieee80211 phy0: w1_ops_config: change monitor mode: false (implement) [ 25.720923] ieee80211 phy0: w1_ops_config: change power-save mode: false (implement) * Starting restore sound card(s') mixer state(s) [fail] [ 25.721849] ieee80211 phy0: w1_ops_bss_info_changed: qos enabled: false (implement) * Stopping save kernel messages [OK] * Starting bluetooth [OK] * PulseAudio configured for per-user sessions saned disabled; edit /etc/default/saned [ 25.988016] hci_cmd_timer: hci0 command tx timeout [ 26.207225] bad LUN (0:1) [ 26.223735] bad target number (1:0) [ 26.252111] bad target number (2:0) [ 26.272170] bad target number (3:0) [ 26.300154] bad target number (4:0) [ 26.328162] bad target number (5:0) [ 26.344180] bad target number (6:0) [ 26.368142] bad target number (7:0) * Checking battery state... [OK] * Stopping System V runlevel capability [OK] Does this give any indication of the problem? the false (implement) messages also reappear when I press the power button to ask it to shutdown, followed by a [fail] status for killing remaining processes.

  Read the article

• Various issues linked to my CD drive, when it has a disc in it

  - by Voyagerfan5761

  When I go to the Desktop and click on a media icon (for my flash drive, a CD, whatever it is), the following problems occur, in this approximate sequence: Nautilus will close if it's open. the desktop icons disappear my Window List shows a button that says "Starting File Manager" the icons reappear the button in Window List disappears Because of this problem, I can no longer drag and drop media, nor can I right-click to perform actions such as "Eject" and "Safely Remove Drive". The same symptoms occur if I click a media icon (that is also present on the desktop) in Nautilus' Computer view, though notably not if I click in the places list on the left. I have confirmed that this problem happens only if there is a CD in the drive (Matshita UJDA360). Also, inserting a disc into the CD drive appears to kill all running programs and restart Nautilus (or X; I'm not sure). Applications like Brasero and Rhythmbox will not start while there is a disc in the drive. Removing the disc doesn't result in the list of media updating; it must be forced to update by clicking on one of the desktop icons and going through one of the above-described cycles. It doesn't seem to matter what type of disc is in the drive. This has happened with CD-RWs I burned years ago using Roxio on Windows XP, the Ubuntu disc I installed from (burned with InfraRecorder Portable under Windows XP), and the retail game disc for Star Trek Armada II. The first indication of a problem was Brasero dying when I tried to insert a disc for erasure and rewriting. Since then, I've drafted several different questions on various issues, finally combining them into this one when I realized that having a CD in the drive was the common link. Could this be a simple driver issue? If Ubuntu is dynamically detecting my hardware on boot, can I specify drivers for devices that I know will be a problem if the default files are used? I'm beginning to think that my laptop, an old Dell Inspiron 2650, is just too old or proprietary-driver-hungry (or something, maybe RAM-starved) for Ubuntu and Windows XP to play nicely alongside each other. Or maybe I just need to carefully take my wall-wart machine to a coffee shop for an afternoon so I can download updates and such from the Internet, as I lack a home connection.

  Read the article

• Wired and Wireless Network Issues with PPPoE

  - by user9054

  down vote favorite Hi Friends, I have got this issue with Ubuntu 10.10. I have been with ubuntu 8.04 and then decided to try out ubuntu 10.10 . I booted with a LiveCD and was able to configure the wireless network painlessly using the livecd. So happily i installed ubuntu 10.10. As soon as ubuntu came up it detected the wireless network and i was able to assign a static IP to eth1 (i dont use DHCP option on my ADSL router) and enter a wap key and use pppoeconf to configure the dialer. The net was on and i was able to surf the net. All hunky dory so far. However on the next boot the fun started. It did not detect the wireless network. I could not see the network manager icon in the systray. I used ifconfig and saw that the entry for eth1 was missing. I used ifup eth1 and it said that eth1 was already up . Then i installed wifi-radar. Wifi-Radar detected the wireless network. I configured wifi-radar for the detected wireless network , set the wap driver as wext and used the manual IP settings. However on clicking connect wifi-radar started looking for a DHCP IP , needless to say it failed. For the love of god i cannot understand why wifi-radar is using DHCP when i have specified manual settings . Next i decided to use the wired network to surf the net looking for a solution . So i plugged in the network cable from my modem , it detected the plugged in connection , i configured eth0 , used pppoeconf and connected to the net. Then i foolishly decided to reboot my PC. And wonders of wonders , the same problem appeared. I cannot see eth0 in my ifconfig anymore. I used pon to start the dsl-provider connection and it said something about network error or something . Now my ifconfig shows only lo , both eth0 and eth1 have disappeared. Can anybody help me on this ? Is it a problem with ipv6 , if so how do you disable ipv6 on ubuntu 10.10 ? OR is this is a known issue with ubuntu 10.10 ? PS : 1) i tried linux mint 10 and had the same issue. On rebooting wireless network was not getting detected . 2) i have made myself the administrator so that there is no issue of rights or anything. Any help is appreciated.

  Read the article

• Ubuntu 12.04 share the internet over WiFi from wvdial?

  - by Sour Lemon

  I have just installed Ubuntu 12.04 on a separate partition on my hard drive so I can dual boot to either Windows 7 or Ubuntu. I am living in Japan and so I'm using a mobile broadband USB device called "Softbank C02LC". By default it seems that this device isn't recognised so I did the following: Terminal: sudo su nano /usr/bin/usbModemScript Nano: #!/bin/bash echo 1c9e 9900 > /sys/bus/usb-serial/drivers/option1/new_id Terminal: chmod +x /usr/bin/usbModemScript nano /etc/udev/rules.d/option.rules Nano: ATTRS{idVendor}=="1c9e", ATTRS{idProduct}=="9900", RUN+="/usr/bin/usbModemScript" ATTRS{idVendor}=="1c9e", ATTRS{idProduct}=="9900", RUN+="/sbin/modprobe option" which made the device visible from the network manager etc. However even though I set up my details correctly when I created a new connection (Correct username, APN etc) as soon as I try to connect it almost immediately disconnects. Because of this I then followed the instructions at this site: http://debugitos.main.jp/index.php?Ubuntu%2F%A5%E2%A5%D0%A5%A4%A5%EB%A5%A4%A5%F3%A5%BF%A1%BC%A5%CD%A5%C3%A5%C8 And I ended up using the c02lc_connect script at the bottom of the page to connect to the internet. The file contains the following bash script: #!/bin/sh usbinterfece=/dev/ttyUSB2 VID=1c9e PID=9900 WRONG_PID=f000 LSUSB=/usr/sbin/lsusb GREP=/bin/grep MODPROBE=/sbin/modprobe SWITCH=/usr/sbin/usb_modeswitch SWITCH_D=/etc/usb_modeswitch.d WVDIAL=/usr/bin/wvdial SLEEP=/bin/sleep SUDO=/usr/bin/sudo WHICH=/usr/bin/which switch_config="$SWITCH_D/$VID:$WRONG_PID" if ! [ -x $WVDIAL -a -x $SWITCH ]; then echo "Install wvdial and usb_modeswitch." exit 0 fi check_usb() { local vid="$1" local pid="$2" ($LSUSB | $GREP "$vid:$pid") } if ! (check_usb "$VID" "$PID"); then echo "Cannot find modem device..." if (check_usb "$VID" "$WRONG_PID") && ( [ -f "$switch_config" ] ); then echo "The device is attached but its mode is wrong." echo "Try usb_modeswitch..." $SUDO $SWITCH -c "$switch_config" $SLEEP 1 if (check_usb "$VID" "$PID"); then echo "Successfully switched the mode." else echo "Failed to switch the mode..." exit 1 fi else exit 1 fi fi if [ ! -c "$usbinterface" ]; then $SUDO $MODPROBE usbserial vendor=0x$VID product=0x$PID $SLEEP 2 fi $SUDO $WVDIAL which works completely fine - no problems what-so-ever. But we also have 1 more laptop here which I need to share the internet connection with. In Windows 7 I do this with the Connectify program, and in Ubuntu I have seen that you can do things like set up hotspots etc. But because I am using WvDial I am not sure how I would share the internet. I am only beginning to use Ubuntu but unfortunately until I can figure out how to share the internet over WiFi when connected via WvDial I have to stick with Windows. If you have any ideas on how to do this it would be much appreciated!

  Read the article

• TechEd 2012: Windows 8 And Metro

  - by Tim Murphy

  Windows 8 is here (or at least very close) and that was the main feature of this morning’s key note.  Antoine LeBlond started off by apologizing to the IT professionals since he planned on showing code.  I’m not sure if IT Pros are that easily confused or why you would need such a disclaimer.  Developers do real work, IT Pros just play with toys (just kidding). The highlights of the Windows 8 keynote for me started with some of the UI design elements that I had not seen when I was shown one of the Build tablets.  Specifically I liked the AppBar features that we have become used to with Windows Phone and some of the gesture features.  Even though they have been available on other platforms before I think Microsoft really got them right. Two other great features of Windows 8 that they demonstrated were the Hyper-V capabilities and the ability to run Windows 8 anywhere from a USB key.  My jaw dropped through the floor seeing a feature rich OS boot off of a thumb drive. WOW!  I also can’t wait to get rid of dual booting just to run Hyper-V images when developing. The morning continued with a session on Metro XAML development with Tim Heuer.  While included a lot of great XAML Metro demos, I was pleasantly surprised by some of the things I found out about Visual Studio 2012.  Finding out that Blend is now integrated with VS2012 was a nice addition after working with them as separate applications was an encouraging start. Moving on to Metro he introduced the nugget that WinRT is Async everywhere.  How deep this model goes will be an interesting thing to find out as I learn more about developing for the platform.  Thankfully he followed that up with a couple of new keywords, await and async, that eliminates a lot of plumbing that has been required in the past for asynchronous transactions. Tim also related that since the Metro framework is relatively small and most apps will use a significant amount of it the entire surface is referenced by default.  This is a contrast to adding namespace and assemblies one after another as we normally do. This was such a power packed session that I can’t detail it all here so here is the teaser list. New icons in VS2012 for extension methods Emulator/simulator testing features for gestures Portable class libraries XAML no longer managed code And so much more …   del.icio.us Tags: Windows 8,Metro,Tim Heuer,XAML,Widows Phone,Hyper-V,Antoine LeBlond,TechEd,TechEd 2012,Visual Studio 2012,Visual Studio

  Read the article

• Testing Workflows &ndash; Test-First

  - by Timothy Klenke

  Originally posted on: http://geekswithblogs.net/TimothyK/archive/2014/05/30/testing-workflows-ndash-test-first.aspxThis is the second of two posts on some common strategies for approaching the job of writing tests.  The previous post covered test-after workflows where as this will focus on test-first.  Each workflow presented is a method of attack for adding tests to a project.  The more tools in your tool belt the better.  So here is a partial list of some test-first methodologies. Ping Pong Ping Pong is a methodology commonly used in pair programing.  One developer will write a new failing test.  Then they hand the keyboard to their partner.  The partner writes the production code to get the test passing.  The partner then writes the next test before passing the keyboard back to the original developer. The reasoning behind this testing methodology is to facilitate pair programming.  That is to say that this testing methodology shares all the benefits of pair programming, including ensuring multiple team members are familiar with the code base (i.e. low bus number). Test Blazer Test Blazing, in some respects, is also a pairing strategy.  The developers don’t work side by side on the same task at the same time.  Instead one developer is dedicated to writing tests at their own desk.  They write failing test after failing test, never touching the production code.  With these tests they are defining the specification for the system.  The developer most familiar with the specifications would be assigned this task. The next day or later in the same day another developer fetches the latest test suite.  Their job is to write the production code to get those tests passing.  Once all the tests pass they fetch from source control the latest version of the test project to get the newer tests. This methodology has some of the benefits of pair programming, namely lowering the bus number.  This can be good way adding an extra developer to a project without slowing it down too much.  The production coder isn’t slowed down writing tests.  The tests are in another project from the production code, so there shouldn’t be any merge conflicts despite two developers working on the same solution. This methodology is also a good test for the tests.  Can another developer figure out what system should do just by reading the tests?  This question will be answered as the production coder works there way through the test blazer’s tests. Test Driven Development (TDD) TDD is a highly disciplined practice that calls for a new test and an new production code to be written every few minutes.  There are strict rules for when you should be writing test or production code.  You start by writing a failing (red) test, then write the simplest production code possible to get the code working (green), then you clean up the code (refactor).  This is known as the red-green-refactor cycle. The goal of TDD isn’t the creation of a suite of tests, however that is an advantageous side effect.  The real goal of TDD is to follow a practice that yields a better design.  The practice is meant to push the design toward small, decoupled, modularized components.  This is generally considered a better design that large, highly coupled ball of mud. TDD accomplishes this through the refactoring cycle.  Refactoring is only possible to do safely when tests are in place.  In order to use TDD developers must be trained in how to look for and repair code smells in the system.  Through repairing these sections of smelly code (i.e. a refactoring) the design of the system emerges. For further information on TDD, I highly recommend the series “Is TDD Dead?”.  It discusses its pros and cons and when it is best used. Acceptance Test Driven Development (ATDD) Whereas TDD focuses on small unit tests that concentrate on a small piece of the system, Acceptance Tests focuses on the larger integrated environment.  Acceptance Tests usually correspond to user stories, which come directly from the customer. The unit tests focus on the inputs and outputs of smaller parts of the system, which are too low level to be of interest to the customer. ATDD generally uses the same tools as TDD.  However, ATDD uses fewer mocks and test doubles than TDD. ATDD often complements TDD; they aren’t competing methods.  A full test suite will usually consist of a large number of unit (created via TDD) tests and a smaller number of acceptance tests. Behaviour Driven Development (BDD) BDD is more about audience than workflow.  BDD pushes the testing realm out towards the client.  Developers, managers and the client all work together to define the tests. Typically different tooling is used for BDD than acceptance and unit testing.  This is done because the audience is not just developers.  Tools using the Gherkin family of languages allow for test scenarios to be described in an English format.  Other tools such as MSpec or FitNesse also strive for highly readable behaviour driven test suites. Because these tests are public facing (viewable by people outside the development team), the terminology usually changes.  You can’t get away with the same technobabble you can with unit tests written in a programming language that only developers understand.  For starters, they usually aren’t called tests.  Usually they’re called “examples”, “behaviours”, “scenarios”, or “specifications”. This may seem like a very subtle difference, but I’ve seen this small terminology change have a huge impact on the acceptance of the process.  Many people have a bias that testing is something that comes at the end of a project.  When you say we need to define the tests at the start of the project many people will immediately give that a lower priority on the project schedule.  But if you say we need to define the specification or behaviour of the system before we can start, you’ll get more cooperation.   Keep these test-first and test-after workflows in your tool belt.  With them you’ll be able to find new opportunities to apply them.

  Read the article

• Can I make my drives visible and change their partition type without losing my data?

  - by user165408

  I have made a lot of mistakes and now I cannot see my hard disk nor I can start my operating system on my laptop. All my passwords and important files on my hdd without any backup. I followed this course of action Changed my hard disk partitions to dynamic just for getting 5th partition. (1st mistake) Decreased partitions to 4 again. Backed up operating system from 4th to 3rd partition with Norton Ghost. Booted from a live CD for Windows XP. Formatted 4th partition and moved my all important data from 1st and 2nd partitions to the 4th partition. Deleted 1st and 2nd partitions and got 1 partition from half of empty space. So I have just 3 partitions and empty space between 1st and 2nd partitions. Tried to install Windows 8 to the first partition but it did not allow because it is dynamic. Also it did not allow to install to other partitions. Tried to install Windows XP to the 1st partition but it said if I continue I cannot use other drivers. Therefore I escaped from installing it. Booted from the Windows XP live CD then increased 1st partiton to less than 400mb of empty space. Therefore I thought it will be adjacent but it was shown as 2 partitions. In my computer I see just 3 drivers. Using Norton Ghost I recovered my OS to the 1st partition. (2nd mistake it was on 4th partition originally) Booted from a Windows XP live CD I tried to install bcdedit to the Windows XP live CD but it did not work. Then I tried to install EaseUS Partition Master Home Edition. It was installed with errors then I start it and it showed me an error like there is no hard disk. I looked to my PC and my drivers were not there. Booted from the Norton Ghost CD and it did not show me my drivers either, but before I was able to see them. I checked numbers of partition shown by the Norton Ghost utility and they are still have same numbers so I have to see my drivers but I cannot see them now. My hard disk is shown as extarnal dynamic now so I cannot see any drive in my PC in the live Windows XP. There are two options; first one is import extarnal disk and second one is convert disk to basic. Will they delete my data? I fear booting from CDs like Windows XP live CD, Norton Ghost CD, and the operating system CD/DVD, because they may overwrite a few MB their data to my data. These recover tools are already exist in Windows XP live CD by The Ultimate Boot CD for Windows. Can any of them help me? CompuAppa SwissKnife V3 DBXtract Disk Investigator Fab's AutoBackup 2.0 FileRecovery Floppy Repair Free Undelete Handy Recovery Recovery Manager Restorastion Restorastion Help File by UBCD4Win UnChk Unstoppable Copier Finally How can I make it so that my drives are visible again without losing my data? How can I convert my dynamic partitions to basic without losing my data?

  Read the article

• Ivy bridge i3 recognized as Xeon e3-1200

  - by user287072

  The situation: I've got a Ivy bridge i3 3225 which is being recognized as a Xeon e3-1200 series cpu by Ubuntu 14.04 64bit. The problem: cpu fan makes more noise than necessary (under dual-boot Win8 the fans are off), cannot install the intel graphics drivers from 01.org. Goals: - find a fix for the load fans could be they are not CPU related, I've tried some fan controller packages, but they made no difference. - get the intel graphics to install (this now fails as xeon cpu's are not supported, I got the package working on a i5 laptop) - get to know some more about how hardware recognition works Tried so far: - a reinstall of Ubuntu, but it was recognized again as a Xeon cpu. - different fan control packages, but they either do not recognized the fans, or just keep fan speed to high. Any pointers as how to get Ubuntu recognized it are more than welcome. lspci -nnQ 00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller [8086:0150] (rev 09) 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port [8086:0151] (rev 09) 00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) 00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04) 00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) 00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04) 00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) 00:1c.5 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 6 [8086:1e1a] (rev c4) 00:1c.6 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev c4) 00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) 00:1f.0 ISA bridge [0601]: Intel Corporation Z77 Express Chipset LPC Controller [8086:1e44] (rev 04) 00:1f.2 SATA controller [0106]: Intel Corporation 7 Series/C210 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e02] (rev 04) 00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04) 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GK106 [GeForce GTX 660] [10de:11c0] (rev a1) 01:00.1 Audio device [0403]: NVIDIA Corporation GK106 HDMI Audio Controller [10de:0e0b] (rev a1) 03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 09) 04:00.0 PCI bridge [0604]: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge [1b21:1080] (rev 03)

  Read the article

• Reading a ZFS USB drive with Mac OS X Mountain Lion

  - by Karim Berrah

  The problem: I'm using a MacBook, mainly with Solaris 11, but something with Mac OS X (ML). The only missing thing is that Mac OS X can't read my external ZFS based USB drive, where I store all my data. So, I decided to look for a solution. Possible solution: I decided to use VirtualBox with a Solaris 11 VM as a passthrough to my data. Here are the required steps: Installing a Solaris 11 VM Install VirtualBox on your Mac OS X, add the extension pack (needed for USB) Plug your ZFS based USB drive on your Mac, ignore it when asked to initialize it. Create a VM for Solaris (bridged network), and before installing it, create a USB filter (in the settings of your Vbox VM, go to Ports, then USB, then add a new USB filter from the attached device "grey usb-connector logo with green plus sign")  Install a Solaris 11 VM, boot it, and install the Guest addition check with "ifconfg -a" the IP address of your Solaris VM Creating a path to your ZFS USB drive In MacOS X, use the "Disk Utility" to unmount the USB attached drive, and unplug the USB device. Switch back to VirtualBox, select the top of the window where your Solaris 11 is running plug your ZFS USB drive, select "ignore" if Mac OS invite you to initialize the disk In the VirtualBox VM menu, go to "Devices" then "USB Devices" and select from the dropping menu your "USB device" Connection your Solaris VM to the USB drive Inside Solaris, you might now check that your device is accessible by using the "format" cli command If not, repeat previous steps Now, with root privilege, force a zpool import -f myusbdevicepoolname because this pool was created on another system check that you see your new pool with "zpool status" share your pool with NFS: share -F NFS /myusbdevicepoolname Accessing the USB ZFS drive from Mac OS X This is the easiest step: access an NFS share from mac OS Create a "ZFSdrive" folder on your MacOS desktop from a terminal under mac OS: mount -t nfs IPadressofMySoalrisVM:/myusbdevicepoolname  /Users/yourusername/Desktop/ZFSdrive et voila ! you might access your data, on a ZFS USB drive, directly from your Mountain Lion Desktop. You might play with the share rights in order to alter any read/write rights as needed. You might activate compression, encryption inside the Solaris 11 VM ...

  Read the article

< Previous Page | 328 329 330 331 332 333 334 335 336 337 338 339  | Next Page >