Search Results

Search found 10215 results on 409 pages for 'ram usage'.

Page 332/409 | < Previous Page | 328 329 330 331 332 333 334 335 336 337 338 339  | Next Page >

• Gateway laptop module bay light repeating 12 flashes - what error is that?

  - by Simurr

  I have a Gateway M465-E laptop currently running fine with a T2300E Core Duo installed. I wanted to upgrade it to a Core 2 Duo. My brother has the same model laptop and that took a Core 2 Duo (T7200) just fine. Picked up a T7200 on ebay and installed it. Normally when booting all the indicator lights flash once and the fan spins up before the machine actually starts to POST. With the T7200 installed all the lights flash and the fan spins up, but the module bay activity light flashes 12 times repeatedly. I'm assuming this is an error code, but can find no information about it. There are no beep codes. I've removed the ram, HD, Bay module and no change. Switched back to the T2300E and everything works fine. Anyone know what that error code is? The motherboard was actually manufactured by Foxconn if that helps. Update 1 Returned the CPU as defective. I tested it in 3 M465-E's and all of them did exactly the same thing. I still have no idea what the error code is. I'd still like to know for future reference. Perhaps I should try removing the CPU from one of them and see what happens.

  Read the article

• Slow DB Performance. Seems to be memory related.

  - by David

  I am seeing a pooorly performing web app with a SQL 2005 backend. The db is on a w2k3 machine with 4GB RAM. When I run perfmon on it I see the following. Page life expectancy is low. Consistently under 300 while the Buffer cache hit ratio is always 99% +. The target server memory is always 1618304 and the total server memory is always a number just below that. So it seems that it isn't grabbing enough of the available memory. I have AWE enabled, with the lock pages right for the SQL service account and have set a maximum of 2.25Gb... but it doesn't go near that. When I restart the SQL service the page life expectancy goes much higher, 1000+, and the total target memory starts at 0 and slowly works its way back up to the previous limit. Then it hits the limit and the page life expectancy goes back down massively to <300. So I'm guessing there is something limiting the amount of memory. Any ideas on what that would be and how I can fix it?

  Read the article

• Windows 7 boot animation slows down startup by default?

  - by kngofwrld

  I just upgraded my HDD to an SSD drive. I am running a completely fresh install and enjoy the short boot time. I tweaked the startup to be as fast as I could by removing unneeded apps and such. Nor am I running a solid desktop background (which causes a 30-sec startup delay). I have a 2.1ghz 64 bit laptop with 4 gigs of ram, so it's not a liquid-cooled speed monster, but I checked some super high end PC boot vids on YouTube and noticed that they startup in almost the same time as my machine. I also noticed that the glowing Windows 7 animation plays all the way no matter how fast the PC is. I turned off the animation, and the startup time is unchanged. I turned on verbose startup info and noticed that it runs until the very end, where it looks like it just sits there for no reason waiting for something to happen for a few seconds. So now I think that the Windows 7 startup animation has a timer built into it that forces the computer to wait for no other reason than to play the full animation. Super-fast XP boot vids on YouTube seem to start much faster (and not just because they "have less to load"). Am I imagining things? My question is: How can I turn off not just the animation, but the timer for the animation. Here is a vid that tipped me off, I have no relation to the poster. (warning: soundtrack might be loud) http://www.youtube.com/watch?v=T5LkX3xejJ4

  Read the article

• How to (properly) back up a live QEMU/KVM VM?

  - by Roman

  I'm currently engineering a backup solution for KVM VM's as an additional measure to traditional backups. Unfortunately, all currently (August 2013) existing solutions I came across so far either: do not ensure a consistent backup of the VM (losing RAM state, creating a dirty image, or other things), or require lengthy downtime (complete VM shutdown while backing up). I'm aware of QEMU/libvirt's functionality of taking snapshots, however, it's not yet usable since: image-internal snapshots present you with an ever-changing image file, resulting in a likely dirty backup (assuming one uses qcow2 images at all). one cannot yet merge a currently active external snapshot into the original backing image ("blockcommit"). Out of the above reasons, I'm now implementing a script that: Saves the VM's state and halts it Sets up a devicemapper snapshot(s) where the VM's disk images and state reside Resumes the VM Mount the snapshot(s) of step 2. Backs up the VM's disk and state (configuration for convenience) Merges back the snapshot(s). If I got everything right, this will take consistent backups of VM's with only seconds (if at all, since 1-3 is fast, possibly sub-second) of downtime. Of course, when restoring, the VM will be way in the past, but at least giving me the option of an orderly shutdown/reboot. Am I missing something with this solution? Or has someone indeed already implemented this?

  Read the article

• Can't mount hard drive. Ubuntu 12.04

  - by Sam

  I am trying to recover some pictures on my 320 GB Hard Disk, so I put in a Live Ubuntu CD and am in that right now. In the devices list, it shows my USB drive, but not my 320 GB Hard Disk. I can see the disk in Disk Utility (it says it's on /dev/sda), but it's not mounted, and it says it has a few bad sectors but it is OK. In Disk Usage Analyzer, it says my maximum capacity is 13.4 GB, so it's definitely not using the 320 GB Hard Disk. I tried the following: sudo mkdir /media/newhd (worked) sudo mount /dev/sda /media/newhd (didn't work. it says I must specify the filesystem type) I then tried: fsck.ext4 -f /dev/sda (didn't work. Said: Superblock invalid, trying to backup blocks. then: Bad magic number in super-block while trying to open /dev/sda. The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock) Does anyone have any ideas? The whole problem started when my Windows Vista said "Can't find operating system". Any ideas on how I can get on to my hard drive at /dev/sda?

  Read the article

• What can inexperienced admin expect after server setup completed seemingly fine? [closed]

  - by Miloshio

  Inexperienced person seems to have done everything fine so far. This is his very first time that he is the only one in charge for LAMP server. He has installed OS, network, Apache, PHP, MySQL, Proftpd, MTA & MDA software, configured VirtualHosts properly (facts because he calls himself admin), done user management and various configuration settings with respect to security recommendations and... everything is fine for now... For now. If you were directing horror movie for server admin above mentioned what would you make up for boogieman that showed up and started to pursue him? Omitting hardware disaster cases for which one cannot do anything 'from remote', what is the most common causes of server or part-of-server or server-related significant failure when managed by inexperienced admin? I have in mind something that is newbie admins very often missing which is leading to later intervention of someone with experience? May that be some uncontrolled CPU-eating leftover process, memory-related glitch, widely-used feature that messes up something unexpected on anything like that? Newbie admin for now only monitors disk-space and RAM usage, and number of running processes. He would appreciate any tips regarding what's probably going to happen to his server over time.

  Read the article

• What switch should we use for PCoIP?

  - by Jay R.

  We have a small lab space that seats 10 people and has 20 machines. Each machine is set to 1920x1200 resolution because the user apps are best used at that resolution. Currently the machines are all located close enough to montors that a DisplayPort cable will reach, but the pending lab remodel positions them around 80 feet or more away in racks. Our proposed solution is to use PCoIP. We purchased 10 PCoIP portals and 20 PCoIP host cards. We plan to set up a dedicated network to handle just the PCoIP traffic. After testing just one portal and one host card with a cheap 1G switch from a local office supply store, we were left with less than good impressions about the usefulness in our lab. The framerates were not spectacular and the mouse seemed jerky. Our concern is that we can't get away with the cheap 1G stuff from the store because adding more machines to the switch will just make the user experience worse. What switch would be recommended to best support our PCoIP situation? We will need to plug in at least 30 cables based on just those machines. Is there a particular feature to search for that makes a difference? Is there a switch that works best with PCoIP? Added Info: The reporting webapp for the host card shows maximum bandwidth usage to be 220000 kbps. The average appears to be around 180000 kbps. The reverse direction is much lower, like 15000 kbps.

  Read the article

• How to handle files that don't need version control in mercurial

  - by richardh

  I am new to mercurial, and for the most part do LaTeX reports and statistical calculations in R using .csv and/or .sqlite files. Re LaTeX, all I really care is the .tex file. Re R, I don't need version control on the .csv or .sqlite files because they are static. When I do 'hg add' for a repo with a .csv and/or .sqlite file, I get a warning like: rev2.sqlite: up to 3070 MB of RAM may be required to manage this file (use 'hg revert rev2.sqlite' to cancel pending addition) So I revert and subsequently use adds like hg add -X *.sqlite. I guess I really have two questions: (1) Should I ignore these warnings? Because these large files are static, can I just add to the repo knowing that the diff files will always be empty and not worry about wasted resources? (2) If I should keep excluding these files from the repo, is there away that I can fix this option? I.E., add to my .hgrc file something that always appends an option like -I *.tex -I *.R to my 'hg add' commands? Thanks!

  Read the article

• Hyper-V and attaching physical disks

  - by Mike Christiansen

  So, I'm looking at rebuilding my home server. My current setup is the following Windows 7 Ultimate 1TB Boot Drive (my smallest drive) Windows Dynamic Spanned volume, continaing 1x 1TB drive, 2x 2TB drives, totalling 5TB. I am upgrading to a hardware RAID controller, and I would like to run Hyper-V server core. However, I want to retain the ability to join my "file server" to a homegroup, so I must use Windows 7. I know VHDs can only be like 127GB or something, so I obviously need to directly connect disks to my Windows 7 machine. Here is my plan: Server Core 2008 R2 (Hyper-V) 1TB Boot Drive (storing VHDs for boot drives of VMs) - possibly in a RAID 1 with my other 1TB drive 5x 2TB drives (1x 2TB drive hot spare), totalling 10TB, directly attached to a Windows 7 VM, for use of homegroup for this array. In the past, I directly attached the windows dynamic volume to a Windows 7 VM, and performance was abysmal. The question is, with hardware RAID, will it really make that much of a difference? Server specs: Intel Core 2 Quad Q9550 2.83GHz Asus Maximus II Formula (PCI-E x16) 8GB DDR2 RAM PC2-6400 (Yes, I know its a bit out of date)

  Read the article

• disk space keeps filling up on EC2 instance with no apperent files/directories

  - by sasher

  How come os shows 6.5G used but I see only 3.6G in files/directories? Running as root on an Amazon Linux AMI (seems like Centos), lots of free memory available, no swapping going on, no apparent file descriptors issue. The only thing I can think of is a log file that was deleted while applications append to it. Disk space usage is slowly but continuously rising towards full capacity (~1k/min with very small decreases from time to time) Any explanation? Solution? du --max-depth=1 -h / 1.2G /usr 4.0K /cgroup 22M /lib64 11M /sbin 19M /etc 52K /dev 2.1G /var 4.0K /media 0 /sys 4.0K /selinux du: cannot access /proc/14024/task/14024/fd/4': No such file or directory du: cannot access<br/> /proc/14024/task/14024/fdinfo/4': No such file or directory du: cannot access /proc/14024/fd/4': No such file or directory du: cannot<br/> access/proc/14024/fdinfo/4': No such file or directory 0 /proc 18M /home 4.0K /logs 8.1M /bin 16K /lost+found 12M /tmp 4.0K /srv 35M /boot 79M /lib 56K /root 67M /opt 4.0K /local 4.0K /mnt 3.6G / df -h Filesystem Size Used Avail Use% Mounted on /dev/xvda1 7.9G 6.5G 1.4G 84% / tmpfs 3.7G 0 3.7G 0% /dev/shm sysctl fs.file-nr fs.file-nr = 864 0 761182

  Read the article

• Linux CentOS strange memory readings

  - by user2008937

  I am actually a young junior sys admin. I have a question - i am trying to understand how linux deals with memory... while playing around different monitoring programs I found some strange thing. When I run top on my laptop it shows me that FIREFOX process with pid 8778 takes 18,3% of memory (%MEM column). grep "MemTotal" /proc/meminfo Above command give me 1848336kb/1024 = 1805megs of memory (its ok - i have 2 gigs of ram). So if the firefox process takes 18,3% of MEM(according to tops %MEM column) then it takes 0.183 * 1805 which is approximately 325mb of memory. Quite a lot as for firefox... But well, in Linux there are lots of shared libraries that programs commonly uses (like famous libc). And those libraries are added to memory utilization of every process that uses it in the system, despite they are actually reading same file(single object in memory). So top may show too big mem utilization because of those shared libraries. Well, it is time to use PMAP which should show us the real mem utilization of process. But.. pmap -d $(pidof firefox) mapped: 983460K writeable/private: 757164K shared: 66416K so pmap shows that 983460/1024=993MB of memory is mapped to this process. It is in fact much bigger than mem utilization showed by top. Whats wrong here? How pmap can show more than top? even when top adds also the shared libraries (which in fact are single objects in memory) for each process that uses it? and pmap omits it? Regards Krzysztof

  Read the article

• Computer not finding hard drives on boot -sometimes-

  - by todd.pund

  Computer specs: Mobo: Gigabyte ultradurable 3 - GA-970A-UD3 Processor: First gen I7 3.2GHZ Ram: 8GB Kingston DDR3 1066 Video Card: EVGA NVidia GTX 460 1GB Hard Drive: 500MB 7200rpm x2 (can't remember brand, sorry I'm at work.) Last week my developer preview for Windows 8 ran out so I put my copy of windows 7 back on the computer. The computer at that point started suffering from frequent freezing and crashing. When I rebooted the computer sometimes it wouldn't find the system HD at all. When I looked at the post screen it seemed to show that it wasn't finding either of the HDs. Then yesterday when turning on the computer I just got GRUB as a message (not a GRUB prompt, just GRUB) I haven't had a dual boot of Linux for at least a year. I loaded windows 7 recovery console from the disk and ran: bootrec /fixboot bootrec /fixmbr Which did not help. At that point I just installed Ubuntu 13.04 over the windows 7 install and still received the GRUB post. I went into the BIOS and switched the Hard Drive priorities and then it loaded into Ubuntu fine. For several days everything was just hunky dory until I installed the Ubuntu version of Steam, install Portal and tried to run it. At that point the computer froze and after hard rebooting couldn't find the hard disks again. Then after restarting the system it loaded up fine again and no issues since. (I have not tried to launch portal again). My next thought is to remove the system hard drive and try to use the secondary as the master to see if the primary HD is bad. I'm sorry if this has been confusing, I'll answer any questions I can. Any thoughts?

  Read the article

• Java: compile and run hanging at command prompt

  - by dwwilson66

  I'm having an issue that I'm hoping someone can help with. I'm working on netbook running WinXP Pro SP3, 1.6GHz & 1GB of RAM. I've got a relatively simple java program that I'm able to successfully compile and run on other computers (both XP and Win7), so I suspect my code is working fine--I've verified that all computers are running the same version of Java (build 1.7.0_02-b13). For about the past week, I get maybe three or four compiles and runs at the command prompt (running CMD from within WinXp) before I hang with a blinking cursor after keying my command and pressing enter. If I shut down the command prompt window and restart it, I can compile and run the program just fine--again, pointing to an OS/environment issue rather than code. The only system change I've made in the past week is to uninstall a Lexmark printer that I ditched a year ago, and removing/reinstalling Java. Oh, and an automatic Windows update... :\ I've used this netbook successfully for programming classes for the past year and a half. Anyone familiar with this issue and know of some system tweaks to solve it? I suspect that memory may not be getting cleaned up when the java program quits...only when CMD closes, but don't know any tools to troubleshoot. Ideas?

  Read the article

• Servers - Buying New vs Buying Second-hand

  - by Django Reinhardt

  We're currently in the process of adding additional servers to our website. We have a pretty simple topology planned: A Firewall/Router Server infront of a Web Application Server and Database Server. Here's a simple (and technically incorrect) diagram that I used in a previous question to illustrate what I mean: We're now wondering about the specs of our two new machines (the Web App and Firewall servers) and whether we can get away with buying a couple of old servers. (Note: Both machines will be running Windows Server 2008 R2.) We're not too concerned about our Firewall/Router server as we're pretty sure it won't be taxed too heavily, but we are interested in our Web App server. I realise that answering this type of question is really difficult without a ton of specifics on users, bandwidth, concurrent sessions, etc, etc., so I just want to focus on the general wisdom on buying old versus new. I had originally specced a new Dell PowerEdge R300 (1U Rack) for our company. In short, because we're going to be caching as much data as possible, I focussed on Processor Speed and Memory: Quad-Core Intel Xeon X3323 2.5Ghz (2x3M Cache) 1333Mhz FSB 16GB DDR2 667Mhz But when I was looking for a cheap second-hand machine for our Firewall/Router, I came across several machines that made our engineer ask a very reasonable question: If we stuck a boat load of RAM in this thing, wouldn't it do for the Web App Server and save us a ton of money in the process? For example, what about a second-hand machine with the following specs: 2x Dual-Core AMD Opteron 2218 2.6Ghz (2MB Cache) 1000Mhz HT 16GB DDR2 667Mhz Would it really be comparable with the more expensive (new) server above? Our engineer postulated that the reason companies upgrade their servers to newer processors is often because they want to reduce their power costs, and that a 2.6Ghz processor was still a 2.6Ghz processor, no matter when it was made. Benchmarks on various sites don't really support this theory, but I was wondering what server admin thought. Thanks for any advice.

  Read the article

• How to Monitor Network in Medium-Sized Company?

  - by Kyle Lowry

  I work at a medium sized company (100+ employees). An issue that has been cropping up is network performance, internet access in particular. We have about 70 or more computers, a mix of Mac OS X and Windows XP & 7 machines. We have several servers (Exchange server, PC file servers, MS SQL, Blackberry, FTP, Mac server, etc). There are four main switches, a SonicWall firewall, and probably a couple routers in the server room with a dozen or so more scattered around the building. The network structure has grown organically over a number of years; and, as far as I know, there really isn't a monitoring solution in place. When we experience network issues (slow connections, dropped packets, and so on), our general solution is to power cycle some hardware or go around to each employee and ask them if they are uploading/downloading any large files. This is really inefficient and time consuming, and it does not allow us to monitor the network, tackling potential problems proactively. I would like to find a solution that would allow me to monitor network usage company-wide in real time, with detail going down to the individual computer, ideally. Given the hodgepodge of equipment and operating systems, what would be the best way to set up some kind of monitoring solution? Hardware, software, restructuring our network architecture?

  Read the article

• Limited bandwidth and transfer rates per user.

  - by Cx03

  I searched for a while but couldn't find anything concrete, hopefully someone can help me. I'm going to be running a Debian server on a gigabit port, and want to give each user his/her fair share of internet access. The first objective is easy - transfer rates (speed) per user. From what I've looked at, IPTables/Shorewall could do the job easy. Is this easy to setup, or could one of you point me at a config? I was hoping to limit users at 300mbit or 650mbit each. The second objective gets complicated. Due to the usage of the boxes, most of the traffic will be internal network traffic that does NOT get counted to the quota. However, I still need to limit the external traffic, and if they go over, cut off access (or throttle traffic to a very low speed (10mbit?)). Let's say the user has a 3TB external traffic limit. The IF part is: If the hostname they are exchanging the traffic with DOES NOT MATCH .ovh. or .kimsufi. (company owns multiple TLDs), count to the quota. Once said quota exceeds 3TB, choke them. Where could I find a system to count that for me? It would also need to reset or be able to be manually reset on a monthly basis. Thanks ahead of time!

  Read the article

• Hyper-V and attaching physical disks [migrated]

  - by Mike Christiansen

  So, I'm looking at rebuilding my home server. My current setup is the following Windows 7 Ultimate 1TB Boot Drive (my smallest drive) Windows Dynamic Spanned volume, continaing 1x 1TB drive, 2x 2TB drives, totalling 5TB. I am upgrading to a hardware RAID controller, and I would like to run Hyper-V server core. However, I want to retain the ability to join my "file server" to a homegroup, so I must use Windows 7. I know VHDs can only be like 127GB or something, so I obviously need to directly connect disks to my Windows 7 machine. Here is my plan: Server Core 2008 R2 (Hyper-V) 1TB Boot Drive (storing VHDs for boot drives of VMs) - possibly in a RAID 1 with my other 1TB drive 5x 2TB drives (1x 2TB drive hot spare), totalling 10TB, directly attached to a Windows 7 VM, for use of homegroup for this array. In the past, I directly attached the windows dynamic volume to a Windows 7 VM, and performance was abysmal. The question is, with hardware RAID, will it really make that much of a difference? Server specs: Intel Core 2 Quad Q9550 2.83GHz Asus Maximus II Formula (PCI-E x16) 8GB DDR2 RAM PC2-6400 (Yes, I know its a bit out of date)

  Read the article

• How to set up Windows 7 Professional as a NAS

  - by Enyalius

  I searched and didn't find any answers, so please forgive me if this is a repeat. Anyway, I have an older computer that I'm using as an HTPC, and I was hoping that I could use it as a NAS/multimedia server, as well. My primary uses would include accessing content on my PS3 (same LAN), accessing content from other computers on my home network and (if I can) accessing content from my Android phone over the internet. I have used SubSonic to stream music to my Android phone and other computers before, but I would really like to find a way to do this natively if possible. I know that I can buy external hard disk cases that can plug in the USB port of my router, that I can get a Drobo or other network storage solution, but I would really just rather not spend the money (especially considering that I already have a computer that I should be able to use). Hardware involved: Apple AirPort Extreme base station router (most recent revision) Home Theater Personal Computer: Core 2 Duo @ 2.4GHz, 8GB DDR2 RAM, ~3.5TB hard drive space Sony Playstaiton 3 Thin 120GB HTC Thunderbolt (I have 4G coverage) rooted and running Android 2.2.1 Various Apple laptops Various Windows 7 desktops/laptops Thanks in advance! Note- I have looked at open source NAS software but I would like to preserve the Windows Media Center functionality in Windows 7, so other NAS software is not an option for me currently. .

  Read the article

• Write stderror to a file using PowerShell

  - by Zian Choy

  How do I capture error messages from a PowerShell-launched command in a text file? I searched the Internet for a while and found that supposedly, I should be able to do something like cmd /c "big blob of text >C:\output.txt 2>c:\errors.txt" to direct the output to output.txt and the errors to errors.txt but when I try to run the command, I get the following error: cmd.exe : The filename, directory name, or volume label syntax is incorrect. At C:\Users\Zian\Desktop\Untitled1.ps1:27 char:4 + cmd <<<< /c $command + CategoryInfo : NotSpecified: (The filename, d...x is incorrect.:String) [], RemoteException + FullyQualifiedErrorId : NativeCommandError Furthermore, if I try to run the command without everything starting at "2", then the command executes correctly and output.txt catches the right output. I looked at Redirect stderr to variable in powershell but it wasn't helpful because the answer to that question suggests capturing the entire output and filtering it in memory. In my case, I am backing up every database on a computer and since the databases won't fit in my laptop's RAM, I cannot use the question's solution. I also found tantalizing suggestions about using $err = @(command goes here) but with no information on what to do other than simply inserting that line of text. I tried to utilize the search function on Serverfault with the string "@()", but it did not return any results. What can I do to get the error messages into errors.txt?

  Read the article

• Intel HD Graphics vs NVIDIA Quadro FX 380 PCI-E

  - by Michael

  I recently purchased an Acer Veriton which has an i5-650 processor, Windows 7 Pro (64 bit) and Intel HD Graphics listed as the video card. I also purchased a PNY nVIDIA Quadro FX 380 PCI-E card for improved picture and home video viewing and editing. I have already replaced the original 300 wattt power supply to a 430 watt Antec Truepower I had on hand and boosted the RAM to 8 gigs from the original 4. Question 1) Am I getting any improvement in visual quality or system speed with the Quadro or is it a waste of money and I should just save up to buy a bigger video card? This card was on sale for $115. If I am getting improvement then I need to ask another question. Question 2) Instructions for the Quadro installation are as follows... 1--Uninstall the existing VGA driver. -Remove the existing Display Driver via "Add or Remove Porgrams". -Shut down your computer. 2--Remove your Existing Graphics Board (or Disable Integrated 3D Graphics Controller). skipping instructions on how to remove existing graphics board -Systems with integrated (also know as on-board) 3D graphics may require you to disable the integrated 3D graphics system. Consult the owners or vendor manual that came with your PC on how to properly do this. So is the Intel HD Graphics considered a 3D graphics controller? If so should I just contact Acer or can anyone give me instructions? Thanks in advance for any help.

  Read the article

• Server 2008 R2 boot is at 2 hours and counting. What now?

  - by Jesse

  This morning, we rebooted our Server 2008 R2 box. No problem, came right back up. Then we shut it down and let it install windows updates. While it was off, we added some RAM. Then we turned it back on. The system came right back up to the "press ctrl-alt-delete" screen, so far, so good. I logged in. The system got as far as "Applying Group Policy" -- then spent almost an hour applying drive mappings. Finally finished that, and has now spent 30 minutes on waiting for the Event Notification Service. I still haven't been able to log in. Remote desktop service doesn't appear to be running yet. I tried viewing the event log from another machine. I see that the box is writing to the Security log, but there are no events in System or Application in the last 45 minutes. Digging through the System log of events from 45 minutes ago, I see a bunch of timeouts: A timeout (30000 milliseconds) was reached while waiting for a transaction response from the ShellHWDetection service. [lots of these] A timeout (30000 milliseconds) was reached while waiting for a transaction response from the wuauserv service. A timeout (30000 milliseconds) was reached while waiting for a transaction response from the SessionEnv service. A timeout (30000 milliseconds) was reached while waiting for a transaction response from the Schedule service. A timeout (30000 milliseconds) was reached while waiting for a transaction response from the CertPropSvc service. What can I do? Should I try shutting it down remotely, or will that do more damage?

  Read the article

• System With Two Network Adapters [closed]

  - by Synetech inc.

  Hi, My system has a NIC (Marvell Yukon) built-into the motherboard, but I also have a D-Link (RealTek) card. I figure that using the D-Link and disabling the Marvell makes the most sense, though I'm wondering if maybe the built-in one has better throughput (not that my Internet connection is so fast). Also, I'm wondering about the merits of using both at the same time. My router has four ports and I have experimented with enabling and plugging both NICs into the router. I was able to connect to the Internet, but the pattern of usage seemed irregular (which adapter was chosen for the transfer and any given point). I also considered bridging the two, but am having difficulty in finding out what exactly creating network bridge does in the context of the Windows Network Connections window. I am familiar with the concept of connecting networks, so it seems to me that birding two connections on the same segment is pointless at best (and can cause problems like loops?) Does anyone have any tips on what to do if a system has more than one NIC and any clarification on the bridge option? Thanks a lot.

  Read the article

• Windows 7 BSOD on boot after windows update

  - by Razor Storm

  After Windows updates today, I restarted my desktop (for the first time in a couple weeks), and on boot up ran into a BSOD: STOP: 0x0000007E (0xFFFFFFFFC0000005, 0xFFFFF8000355AB5A, 0xFFFFF880031CB3A8, 0xFFFFF880031CAC10) I tried system restore, but there was only 1 restore point which was from all the way back in January. I tried it anyway but after 10 minutes of running it said system restore could not be completed. Additional info: I checked my BIOS and it is detecting my rams. CPU is Intel Sandy Bridge i5-2500k overclocked to 4.3GHz. I reclocked it back to stock speeds (3.3 GHz) in case it was causing the issue (I highly doubt that it is). But the problem persists. Running Windows 7. 12 GB of RAM at 1333 MHz OS on 64gb SSD. What is causing this? How should I fix it? Also, if it is caused by windows update, is there a way to undo the update with command prompt? I tried safemode, and the blue screen comes up as well, but I am able to access command prompt.

  Read the article

• Compare-Object gives false differences

  - by Andy

  I have some problem with Compare-Object. My task is to get difference between two directory snapshots made at different times. First snapshot is taken like this: ls -recurse d:\dir | export-clixml dir-20100129.xml Then, later, I get second snapshot and load both of them: $b = (import-clixml dir-20100130.xml) $a = (import-clixml dir-20100129.xml) Next, I'm trying to compare with Compare-Object, like that: diff $a $b What I get is in some places files that were added to $b since $a, but in some -- files that were in both snapshots, and some files, that were added to $b, are not given in Compare-Object output. Puzzling, but $b.count - $a.count is EXACTLY the same as (diff $a $b).count. Why is that? Ok, Compare-Object has -property param. I try to use that: diff -property fullname $a $b And I get the whole mess of differences: it shows me ALL the files. For example, say $a contains: A\1.txt A\2.txt A\3.txt And $b contains: X\2.mp3 X\3.mp3 X\4.mp3 A\1.txt A\2.txt A\3.txt diff output is something like that: X\2.mp3 => A\1.txt <= X\3.mp3 => A\2.txt <= X\4.mp3 => A\3.txt <= A\1.txt => A\2.txt => A\3.txt => Weird. I think I don't understand something crucial about Compare- Object usage, and manuals are scarce... Please, help me to get the DIFFERENCE between two directory snapshots. Thanks in advance UPDATE: I've saved data as plain strings like that: > import-clixml dir-20100129.xml | % { $_.fullname } | out-file -enc utf8 a.txt And results are the same. Here're excerpts of both snapshots (top 100-something lines, a.txt and b.txt), output of compare-object, and output of UNIX diff (unified). All files are UTF-8: http://dl.dropbox.com/u/2873752/compare-object-problem.zip

  Read the article

• Problem with setting up RAID 5 on FreeNAS

  - by Benjy23

  I've been running FreeNAS for a while now. Hardware is 1.8 GHz Celeron, RAM 1 GB. SATA card is Via - I am not sure about the model. It's 2 ports and I have 6 x 1.5 TB hard drives. All ran OK while running on 1.5 TB, no RAID. I'm now trying to create a RAID 5 with my 6 hard drives. Software RAID. Is it normal for it to take roughly up to 2 weeks just to build the RAID? Sorry, I'm very new to implementing RAID and googling doesn't tell much other than it takes a long time. Also the RAID building process seems to fail many times. Going to degraded. I suspect it's because 4 of my hard drives are connected to my motherboard and the other 2 are connected to my SATA card. What's your take? I'm considering 2 options now. Either get a 8 port SATA card and attach all the hard drives to it. Or get a RAID controller 8 portcard which is probably going to be more pricey. Also how do you access hardware RAID through FreeNAS? I like how FreeNAS emails you should your harddrive fails. Can this be done as well with hardware RAID?

  Read the article

< Previous Page | 328 329 330 331 332 333 334 335 336 337 338 339  | Next Page >