Search Results

Search found 21456 results on 859 pages for 'video memory'.

Page 332/859 | < Previous Page | 328 329 330 331 332 333 334 335 336 337 338 339  | Next Page >

• Diagnose PC Hardware Problems with an Ubuntu Live CD

  - by Trevor Bekolay

  So your PC randomly shuts down or gives you the blue screen of death, but you can’t figure out what’s wrong. The problem could be bad memory or hardware related, and thankfully the Ubuntu Live CD has some tools to help you figure it out. Test your RAM with memtest86+ RAM problems are difficult to diagnose—they can range from annoying program crashes, or crippling reboot loops. Even if you’re not having problems, when you install new RAM it’s a good idea to thoroughly test it. The Ubuntu Live CD includes a tool called Memtest86+ that will do just that—test your computer’s RAM! Unlike many of the Live CD tools that we’ve looked at so far, Memtest86+ has to be run outside of a graphical Ubuntu session. Fortunately, it only takes a few keystrokes. Note: If you used UNetbootin to create an Ubuntu flash drive, then memtest86+ will not be available. We recommend using the Universal USB Installer from Pendrivelinux instead (persistence is possible with Universal USB Installer, but not mandatory). Boot up your computer with a Ubuntu Live CD or USB drive. You will be greeted with this screen: Use the down arrow key to select the Test memory option and hit Enter. Memtest86+ will immediately start testing your RAM. If you suspect that a certain part of memory is the problem, you can select certain portions of memory by pressing “c” and changing that option. You can also select specific tests to run. However, the default settings of Memtest86+ will exhaustively test your memory, so we recommend leaving the settings alone. Memtest86+ will run a variety of tests that can take some time to complete, so start it running before you go to bed to give it adequate time. Test your CPU with cpuburn Random shutdowns – especially when doing computationally intensive tasks – can be a sign of a faulty CPU, power supply, or cooling system. A utility called cpuburn can help you determine if one of these pieces of hardware is the problem. Note: cpuburn is designed to stress test your computer – it will run it fast and cause the CPU to heat up, which may exacerbate small problems that otherwise would be minor. It is a powerful diagnostic tool, but should be used with caution. Boot up your computer with a Ubuntu Live CD or USB drive, and choose to run Ubuntu from the CD or USB drive. When the desktop environment loads up, open the Synaptic Package Manager by clicking on the System menu in the top-left of the screen, then selecting Administration, and then Synaptic Package Manager. Cpuburn is in the universe repository. To enable the universe repository, click on Settings in the menu at the top, and then Repositories. Add a checkmark in the box labeled “Community-maintained Open Source software (universe)”. Click close. In the main Synaptic window, click the Reload button. After the package list has reloaded and the search index has been rebuilt, enter “cpuburn” in the Quick search text box. Click the checkbox in the left column, and select Mark for Installation. Click the Apply button near the top of the window. As cpuburn installs, it will caution you about the possible dangers of its use. Assuming you wish to take the risk (and if your computer is randomly restarting constantly, it’s probably worth it), open a terminal window by clicking on the Applications menu in the top-left of the screen and then selection Applications > Terminal. Cpuburn includes a number of tools to test different types of CPUs. If your CPU is more than six years old, see the full list; for modern AMD CPUs, use the terminal command burnK7 and for modern Intel processors, use the terminal command burnP6 Our processor is an Intel, so we ran burnP6. Once it started up, it immediately pushed the CPU up to 99.7% total usage, according to the Linux utility “top”. If your computer is having a CPU, power supply, or cooling problem, then your computer is likely to shutdown within ten or fifteen minutes. Because of the strain this program puts on your computer, we don’t recommend leaving it running overnight – if there’s a problem, it should crop up relatively quickly. Cpuburn’s tools, including burnP6, have no interface; once they start running, they will start driving your CPU until you stop them. To stop a program like burnP6, press Ctrl+C in the terminal window that is running the program. Conclusion The Ubuntu Live CD provides two great testing tools to diagnose a tricky computer problem, or to stress test a new computer. While they are advanced tools that should be used with caution, they’re extremely useful and easy enough that anyone can use them. Similar Articles Productive Geek Tips Reset Your Ubuntu Password Easily from the Live CDCreate a Persistent Bootable Ubuntu USB Flash DriveAdding extra Repositories on UbuntuHow to Share folders with your Ubuntu Virtual Machine (guest)Building a New Computer – Part 3: Setting it Up TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Have Fun Editing Photo Editing with Citrify Outlook Connector Upgrade Error Gadfly is a cool Twitter/Silverlight app Enable DreamScene in Windows 7 Microsoft’s “How Do I ?” Videos Home Networks – How do they look like & the problems they cause

  Read the article

• How to Buy an SD Card: Speed Classes, Sizes, and Capacities Explained

  - by Chris Hoffman

  Memory cards are used in digital cameras, music players, smartphones, tablets, and even laptops. But not all SD cards are created equal — there are different speed classes, physical sizes, and capacities to consider. Different devices require different types of SD cards. Here are the differences you’ll need to keep in mind when picking out the right SD card for your device. Speed Class In a nutshell, not all SD cards offer the same speeds. This matters for some tasks more than it matters for others. For example, if you’re a professional photographer taking photos in rapid succession on a DSLR camera saving them in high-resolution RAW format, you’ll want a fast SD card so your camera can save them as fast as possible. A fast SD card is also important if you want to record high-resolution video and save it directly to the SD card. If you’re just taking a few photos on a typical consumer camera or you’re just using an SD card to store some media files on your smartphone, the speed isn’t as important. Manufacturers use “speed classes” to measure an SD card’s speed. The SD Association that defines the SD card standard doesn’t actually define the exact speeds associated with these classes, but they do provide guidelines. There are four different speed classes — 10, 8, 4, and 2. 10 is the fastest, while 2 is the slowest. Class 2 is suitable for standard definition video recording, while classes 4 and 6 are suitable for high-definition video recording. Class 10 is suitable for “full HD video recording” and “HD still consecutive recording.” There are also two Ultra High Speed (UHS) speed classes, but they’re more expensive and are designed for professional use. UHS cards are designed for devices that support UHS. Here are the associated logos, in order from slowest to fastest:       You’ll probably be okay with a class 4 or 6 card for typical use in a digital camera, smartphone, or tablet. Class 10 cards are ideal if you’re shooting high-resolution videos or RAW photos. Class 2 cards are a bit on the slow side these days, so you may want to avoid them for all but the cheapest digital cameras. Even a cheap smartphone can record HD video, after all. An SD card’s speed class is identified on the SD card itself. You’ll also see the speed class on the online store listing or on the card’s packaging when purchasing it. For example, in the below photo, the middle SD card is speed class 4, while the two other cards are speed class 6. If you see no speed class symbol, you have a class 0 SD card. These cards were designed and produced before the speed class rating system was introduced. They may be slower than even a class 2 card. Physical Size Different devices use different sizes of SD cards. You’ll find standard-size CD cards, miniSD cards, and microSD cards. Standard SD cards are the largest, although they’re still very small. They measure 32x24x2.1 mm and weigh just two grams. Most consumer digital cameras for sale today still use standard SD cards. They have the standard “cut corner”  design. miniSD cards are smaller than standard SD cards, measuring 21.5x20x1.4 mm and weighing about 0.8 grams. This is the least common size today. miniSD cards were designed to be especially small for mobile phones, but we now have a smaller size. microSD cards are the smallest size of SD card, measuring 15x11x1 mm and weighing just 0.25 grams. These cards are used in most cell phones and smartphones that support SD cards. They’re also used in many other devices, such as tablets. SD cards will only fit into marching slots. You can’t plug a microSD card into a standard SD card slot — it won’t fit. However, you can purchase an adapter that allows you to plug a smaller SD card into a larger SD card’s form and fit it into the appropriate slot. Capacity Like USB flash drives, hard drives, solid-state drives, and other storage media, different SD cards can have different amounts of storage. But the differences between SD card capacities don’t stop there. Standard SDSC (SD) cards are 1 MB to 2 GB in size, or perhaps 4 GB in size — although 4 GB is non-standard. The SDHC standard was created later, and allows cards 2 GB to 32 GB in size. SDXC is a more recent standard that allows cards 32 GB to 2 TB in size. You’ll need a device that supports SDHC or SDXC cards to use them. At this point, the vast majority of devices should support SDHC. In fact, the SD cards you have are probably SDHC cards. SDXC is newer and less common. When buying an SD card, you’ll need to buy the right speed class, size, and capacity for your needs. Be sure to check what your device supports and consider what speed and capacity you’ll actually need. Image Credit: Ryosuke SEKIDO on Flickr, Clive Darra on Flickr, Steven Depolo on Flickr

  Read the article

• List of Commonly Used Value Types in XNA Games

  - by Michael B. McLaughlin

  Most XNA programmers are concerned about generating garbage. More specifically about allocating GC-managed memory (GC stands for “garbage collector” and is both the name of the class that provides access to the garbage collector and an acronym for the garbage collector (as a concept) itself). Two of the major target platforms for XNA (Windows Phone 7 and Xbox 360) use variants of the .NET Compact Framework. On both variants, the GC runs under various circumstances (Windows Phone 7 and Xbox 360). Of concern to XNA programmers is the fact that it runs automatically after a fixed amount of GC-managed memory has been allocated (currently 1MB on both systems). Many beginning XNA programmers are unaware of what constitutes GC-managed memory, though. So here’s a quick overview. In .NET, there are two different “types” of types: value types and reference types. Only reference types are managed by the garbage collector. Value types are not managed by the garbage collector and are instead managed in other ways that are implementation dependent. For purposes of XNA programming, the important point is that they are not managed by the GC and thus do not, by themselves, increment that internal 1 MB allocation counter. (n.b. Structs are value types. If you have a struct that has a reference type as a member, then that reference type, when instantiated, will still be allocated in the GC-managed memory and will thus count against the 1 MB allocation counter. Putting it in a struct doesn’t change the fact that it gets allocated on the GC heap, but the struct itself is created outside of the GC’s purview). Both value types and reference types use the keyword ‘new’ to allocate a new instance of them. Sometimes this keyword is hidden by a method which creates new instances for you, e.g. XmlReader.Create. But the important thing to determine is whether or not you are dealing with a value types or a reference type. If it’s a value type, you can use the ‘new’ keyword to allocate new instances of that type without incrementing the GC allocation counter (except as above where it’s a struct with a reference type in it that is allocated by the constructor, but there are no .NET Framework or XNA Framework value types that do this so it would have to be a struct you created or that was in some third-party library you were using for that to even become an issue). The following is a list of most all of value types you are likely to use in a generic XNA game: AudioCategory (used with XACT; not available on WP7) AvatarExpression (Xbox 360 only, but exposed on Windows to ease Xbox development) bool BoundingBox BoundingSphere byte char Color DateTime decimal double any enum (System.Enum itself is a class, but all enums are value types such that there are no GC allocations for enums) float GamePadButtons GamePadCapabilities GamePadDPad GamePadState GamePadThumbSticks GamePadTriggers GestureSample int IntPtr (rarely but occasionally used in XNA) KeyboardState long Matrix MouseState nullable structs (anytime you see, e.g. int? something, that ‘?’ denotes a nullable struct, also called a nullable type) Plane Point Quaternion Ray Rectangle RenderTargetBinding sbyte (though I’ve never seen it used since most people would just use a short) short TimeSpan TouchCollection TouchLocation TouchPanelCapabilities uint ulong ushort Vector2 Vector3 Vector4 VertexBufferBinding VertexElement VertexPositionColor VertexPositionColorTexture VertexPositionNormalTexture VertexPositionTexture Viewport So there you have it. That’s not quite a complete list, mind you. For example: There are various structs in the .NET framework you might make use of. I left out everything from the Microsoft.Xna.Framework.Graphics.PackedVector namespace, since everything in there ventures into the realm of advanced XNA programming anyway (n.b. every single instantiable thing in that namespace is a struct and thus a value type; there are also two interfaces but interfaces cannot be instantiated at all and thus don’t figure in to this discussion). There are so many enums you’re likely to use (PlayerIndex, SpriteSortMode, SpriteEffects, SurfaceFormat, etc.) that including them would’ve flooded the list and reduced its utility. So I went with “any enum” and trust that you can figure out what the enums are (and it’s rare to use ‘new’ with an enum anyway). That list also doesn’t include any of the pre-defined static instances of some of the classes (e.g. BlendState.AlphaBlend, BlendState.Opaque, etc.) which are already allocated such that using them doesn’t cause any new allocations and therefore doesn’t increase that 1 MB counter. That list also has a few misleading things. VertexElement, VertexPositionColor, and all the other vertex types are structs. But you’re only likely to ever use them as an array (for use with VertexBuffer or DynamicVertexBuffer), and all arrays are reference types (even arrays of value types such as VertexPositionColor[ ] or int[ ]). * So that’s it for now. The note below may be a bit confusing (it deals with how the GC works and how arrays are managed in .NET). If so, you can probably safely ignore it for now but feel free to ask any questions regardless. * Arrays of value types (where the value type doesn’t contain any reference type members) are much faster for the GC to examine than arrays of reference types, so there is a definite benefit to using arrays of value types where it makes sense. But creating arrays of value types does cause the GC’s allocation counter to increase. Indeed, allocating a large array of a value type is one of the quickest ways to increment the allocation counter since a .NET array is a sequential block of memory. An array of reference types is just a sequential block of references (typically 4 bytes each) while an array of value types is a sequential block of instances of that type. So for an array of Vector3s it would be 12 bytes each since each float is 4 bytes and there are 3 in a Vector3; for an array of VertexPositionNormalTexture structs it would typically be 32 bytes each since it has two Vector3s and a Vector2. (Note that there are a few additional bytes taken up in the creation of an array, typically 12 but sometimes 16 or possibly even more, which depend on the implementation details of the array type on the particular platform the code is running on).

  Read the article

• OS Analytics with Oracle Enterprise Manager (by Eran Steiner)

  - by Zeynep Koch

  Oracle Enterprise Manager Ops Center provides a feature called "OS Analytics". This feature allows you to get a better understanding of how the Operating System is being utilized. You can research the historical usage as well as real time data. This post will show how you can benefit from OS Analytics and how it works behind the scenes. The recording of our call to discuss this blog is available here: https://oracleconferencing.webex.com/oracleconferencing/ldr.php?AT=pb&SP=MC&rID=71517797&rKey=4ec9d4a3508564b3Download the presentation here See also: Blog about Alert Monitoring and Problem Notification Blog about Using Operational Profiles to Install Packages and other content Here is quick summary of what you can do with OS Analytics in Ops Center: View historical charts and real time value of CPU, memory, network and disk utilization Find the top CPU and Memory processes in real time or at a certain historical day Determine proper monitoring thresholds based on historical data Drill down into a process details Where to start To start with OS Analytics, choose the OS asset in the tree and click the Analytics tab. You can see the CPU utilization, Memory utilization and Network utilization, along with the current real time top 5 processes in each category (click the image to see a larger version):  In the above screen, you can click each of the top 5 processes to see a more detailed view of that process. Here is an example of one of the processes: One of the cool things is that you can see the process tree for this process along with some port binding and open file descriptors. Next, click the "Processes" tab to see real time information of all the processes on the machine: An interesting column is the "Target" column. If you configured Ops Center to work with Enterprise Manager Cloud Control, then the two products will talk to each other and Ops Center will display the correlated target from Cloud Control in this table. If you are only using Ops Center - this column will remain empty. The "Threshold" tab is particularly helpful - you can view historical trends of different monitored values and based on the graph - determine what the monitoring values should be: You can ask Ops Center to suggest monitoring levels based on the historical values or you can set your own. The different colors in the graph represent the current set levels: Red for critical, Yellow for warning and Blue for Information, allowing you to quickly see how they're positioned against real data. It's important to note that when looking at longer periods, Ops Center smooths out the data and uses averages. So when looking at values such as CPU Usage, try shorter time frames which are more detailed, such as one hour or one day. Applying new monitoring values When first applying new values to monitored attributes - a popup will come up asking if it's OK to get you out of the current Monitoring Policy. This is OK if you want to either have custom monitoring for a specific machine, or if you want to use this current machine as a "Gold image" and extract a Monitoring Policy from it. You can later apply the new Monitoring Policy to other machines and also set it as a default Monitoring Profile. Once you're done with applying the different monitoring values, you can review and change them in the "Monitoring" tab. You can also click the "Extract a Monitoring Policy" in the actions pane on the right to save all the new values to a new Monitoring Policy, which can then be found under "Plan Management" -> "Monitoring Policies". Visiting the past Under the "History" tab you can "go back in time". This is very helpful when you know that a machine was busy a few hours ago (perhaps in the middle of the night?), but you were not around to take a look at it in real time. Here's a view into yesterday's data on one of the machines: You can see an interesting CPU spike happening at around 3:30 am along with some memory use. In the bottom table you can see the top 5 CPU and Memory consumers at the requested time. Very quickly you can see that this spike is related to the Solaris 11 IPS repository synchronization process using the "pkgrecv" command. The "time machine" doesn't stop here - you can also view historical data to determine which of the zones was the busiest at a given time: Under the hood The data collected is stored on each of the agents under /var/opt/sun/xvm/analytics/historical/ An "os.zip" file exists for the main OS. Inside you will find many small text files, named after the Epoch time stamp in which they were taken If you have any zones, there will be a file called "guests.zip" containing the same small files for all the zones, as well as a folder with the name of the zone along with "os.zip" in it If this is the Enterprise Controller or the Proxy Controller, you will have folders called "proxy" and "sat" in which you will find the "os.zip" for that controller The actual script collecting the data can be viewed for debugging purposes as well: On Linux, the location is: /opt/sun/xvmoc/private/os_analytics/collect If you would like to redirect all the standard error into a file for debugging, touch the following file and the output will go into it: # touch /tmp/.collect.stderr   The temporary data is collected under /var/opt/sun/xvm/analytics/.collectdb until it is zipped. If you would like to review the properties for the Analytics, you can view those per each agent in /opt/sun/n1gc/lib/XVM.properties. Find the section "Analytics configurable properties for OS and VSC" to view the Analytics specific values. I hope you find this helpful! Please post questions in the comments below. Eran Steiner

  Read the article

• How to Use Steam In-Home Streaming

  - by Chris Hoffman

  Steam’s In-Home Streaming is now available to everyone, allowing you to stream PC games from one PC to another PC on the same local network. Use your gaming PC to power your laptops and home theater system. This feature doesn’t allow you to stream games over the Internet, only the same local network. Even if you tricked Steam, you probably wouldn’t get good streaming performance over the Internet. Why Stream? When you use Steam In-Home streaming, one PC sends its video and audio to another PC. The other PC views the video and audio like it’s watching a movie, sending back mouse, keyboard, and controller input to the other PC. This allows you to have a fast gaming PC power your gaming experience on slower PCs. For example, you could play graphically demanding games on a laptop in another room of your house, even if that laptop has slower integrated graphics. You could connect a slower PC to your television and use your gaming PC without hauling it into a different room in your house. Streaming also enables cross-platform compatibility. You could have a Windows gaming PC and stream games to a Mac or Linux system. This will be Valve’s official solution for compatibility with old Windows-only games on the Linux (Steam OS) Steam Machines arriving later this year. NVIDIA offers their own game streaming solution, but it requires certain NVIDIA graphics hardware and can only stream to an NVIDIA Shield device. How to Get Started In-Home Streaming is simple to use and doesn’t require any complex configuration — or any configuration, really. First, log into the Steam program on a Windows PC. This should ideally be a powerful gaming PC with a powerful CPU and fast graphics hardware. Install the games you want to stream if you haven’t already — you’ll be streaming from your PC, not from Valve’s servers. (Valve will eventually allow you to stream games from Mac OS X, Linux, and Steam OS systems, but that feature isn’t yet available. You can still stream games to these other operating systems.) Next, log into Steam on another computer on the same network with the same Steam username. Both computers have to be on the same subnet of the same local network. You’ll see the games installed on your other PC in the Steam client’s library. Click the Stream button to start streaming a game from your other PC. The game will launch on your host PC, and it will send its audio and video to the PC in front of you. Your input on the client will be sent back to the server. Be sure to update Steam on both computers if you don’t see this feature. Use the Steam > Check for Updates option within Steam and install the latest update. Updating to the latest graphics drivers for your computer’s hardware is always a good idea, too. Improving Performance Here’s what Valve recommends for good streaming performance: Host PC: A quad-core CPU for the computer running the game, minimum. The computer needs enough processor power to run the game, compress the video and audio, and send it over the network with low latency. Streaming Client: A GPU that supports hardware-accelerated H.264 decoding on the client PC. This hardware is included on all recent laptops and PCs. Ifyou have an older PC or netbook, it may not be able to decode the video stream quickly enough. Network Hardware: A wired network connection is ideal. You may have success with wireless N or AC networks with good signals, but this isn’t guaranteed. Game Settings: While streaming a game, visit the game’s setting screen and lower the resolution or turn off VSync to speed things up. In-Home Steaming Settings: On the host PC, click Steam > Settings and select In-Home Streaming to view the In-Home Streaming settings. You can modify your streaming settings to improve performance and reduce latency. Feel free to experiment with the options here and see how they affect performance — they should be self-explanatory. Check Valve’s In-Home Streaming documentation for troubleshooting information. You can also try streaming non-Steam games. Click Games > Add a Non-Steam Game to My Library on your host PC and add a PC game you have installed elsewhere on your system. You can then try streaming it from your client PC. Valve says this “may work but is not officially supported.” Image Credit: Robert Couse-Baker on Flickr, Milestoned on Flickr

  Read the article

• ORA-7445 Troubleshooting

  - by [email protected]

      QUICKLINK: Note 153788.1 ORA-600/ORA-7445 Lookup tool Note 1082674.1 : A Video To Demonstrate The Usage Of The ORA-600/ORA-7445 Lookup Tool [Video]   Have you observed an ORA-07445 error reported in your alert log? While the ORA-600 error is "captured" as a handled exception in the Oracle source code, the ORA-7445 is an unhandled exception error due to an OS exception which should result in the creation of a core file.  An ORA-7445 is a generic error, and can occur from anywhere in the Oracle code. The precise location of the error is identified by the core file and/or trace file it produces.  Looking for the best way to diagnose? Whenever an ORA-7445 error is raised a core file is generated.  There may be a trace file generated with the error as well.   Prior to 11g, the core files are located in the CORE_DUMP_DEST directory.   Starting with 11g, there is a new advanced fault diagnosability infrastructure to manage trace data.  Diagnostic files are written into a root directory for all diagnostic data called the ADR home.   Core files at 11g will go to the ADR HOME/cdump directory.   For more information on the Oracle 11g Diagnosability feature see Note 453125.1 11g Diagnosability Frequently Asked Questions Note 443529.1 11g Quick Steps to Package and Send Critical Error Diagnostic Information to Support[Video]   NOTE:  While the core file is captured in the Diagnosability infrastructure, the file may not be included with a diagnostic package.1.  Check the Alert LogThe alert log may indicate additional errors or other internal errors at the time of the problem.   In some cases, the ORA-7445 error will occur along with ORA-600, ORA-3113, ORA-4030 errors.  The ORA-7445 error can be side effects of the other problems and you should review the first error and associated core file or trace file and work down the list of errors.   Note 1020463.6 DIAGNOSING ORA-3113 ERRORS Note 1812.1 TECH:  Getting a Stack Trace from a CORE file Note 414966.1 RDA Documentation Index   If the ORA-7445 errors are not associated with other error conditions, ensure the trace data is not truncated. If you see a message at the end of the file   "MAX DUMP FILE SIZE EXCEEDED"   the MAX_DUMP_FILE_SIZE parameter is not setup high enough or to 'unlimited'. There could be vital diagnostic information missing in the file and discovering the root issue may be very difficult.  Set the MAX_DUMP_FILE_SIZE appropriately and regenerate the error for complete trace information. For pointers on deeper analysis of these errors see   Note 390293.1 Introduction to 600/7445 Internal Error Analysis Note 211909.1 Customer Introduction to ORA-7445 Errors 2.  Search 600/7445 Lookup Tool Visit My Oracle Support to access the ORA-00600 Lookup tool (Note 153788.1). The ORA-600/ORA-7445 Lookup tool may lead you to applicable content in My Oracle Support on the problem and can be used to investigate the problem with argument data from the error message or you can pull out key stack pointers from the associated trace file to match up against known bugs.3.  "Fine tune" searches in Knowledge Base As the ORA-7445 error indicates an unhandled exception in the Oracle source code, your search in the Oracle Knowledge Base will need to focus on the stack data from the core file or the trace file. Keep in mind that searches on generic argument data will bring back a large result set.  The more you can learn about the environment and code leading to the errors, the easier it will be to narrow the hit list to match your problem. Note 153788.1 ORA-600/ORA-7445 TroubleshooterNote 1082674.1 A Video To Demonstrate The Usage Of The ORA-600/ORA-7445 Lookup Tool [Video] NOTE:  If no trace file is captured, see Note 1812.1 TECH:  Getting a Stack Trace from a CORE file.  Core files are managed through 11g Diagnosability, but are not packaged with other diagnostic data automatically.  The core files can be quite large, but may be useful during analysis within Oracle Support.4.  If assistance is required from Oracle Should it become necessary to get assistance from Oracle Support on an ORA-7445 problem, please provide at a minimum, the Alert log  Associated tracefile(s) or incident package at 11g Patch level  information Core file(s)  Information about changes in configuration and/or application prior to  issues  If error is reproducible, a self-contained reproducible testcase: Note.232963.1 How to Build a Testcase for Oracle Data Server Support to Reproduce ORA-600 and ORA-7445 Errors RDA report or Oracle Configuration Manager information Oracle Configuration Manager Quick Start Guide Note 548815.1 My Oracle Support Configuration Management FAQ Note 414966.1 RDA Documentation Index ***For reference to the content in this blog, refer to Note.1092832.1 Master Note for Diagnosing ORA-600

  Read the article

• Amanda Todd&ndash;What Parents Can Learn From Her Story

  - by D'Arcy Lussier

  Amanda Todd was a bullied teenager who committed suicide this week. Her story has become headline news due in part to her You Tube video she posted telling her story:   The story is heartbreaking for so many reasons, but I wanted to talk about what we as parents can learn from this. Being the dad to two girls, one that’s 10, I’m very aware of the dangers that the internet holds. When I saw her story, one thing jumped out at me – unmonitored internet access at an early age. My daughter (then 9) came home from a friends place once and asked if she could be in a YouTube video with her friend. Apparently this friend was allowed to do whatever she wanted on the internet, including posting goofy videos. This set off warning bells and we ensured our daughter realized the dangers and that she was not to ever post videos of herself. In looking at Amanda’s story, the access to unmonitored internet time along with just being a young girl and being flattered by an online predator were the key events that ultimately led to her suicide. Yes, the reaction of her classmates and “friends” was horrible as well, I’m not diluting that. But our youth don’t fully understand yet that what they do on the internet today will follow them potentially forever. And the people they meet online aren’t necessarily who they claim to be. So what can we as parents learn from Amanda’s story? Parents Shouldn’t Feel Bad About Being Internet Police Our job as parents is in part to protect our kids and keep them safe, even if they don’t like our measures. This includes monitoring, supervising, and restricting their internet activities. In our house we have a family computer in the living room that the kids can watch videos and surf the web. It’s in plain view of everyone, so you can’t hide what you’re looking at. If our daughter goes to a friend’s place, we ask about what they did and what they played. If the computer comes up, we ask about what they did on it. Luckily our daughter is very up front and honest in telling us things, so we have very open discussions. Parents Need to Be Honest About the Dangers of the Internet I’m sure every generation says that “kids grow up so fast these days”, but in our case the internet really does push our kids to be exposed to things they otherwise wouldn’t experience. One wrong word in a Google search, a click of a link in a spam email, or just general curiosity can expose a child to things they aren’t ready for or should never be exposed to (and I’m not just talking about adult material – have you seen some of the graphic pictures from war zones posted on news sites recently?). Our stance as parents has been to be open about discussing the dangers with our kids before they encounter any content – be proactive instead of reactionary. Part of this is alerting them to the monsters that lurk on the internet as well. As kids explore the world wide web, they’re eventually going to encounter some chat room or some Facebook friend invite or other personal connection with someone. More than ever kids need to be educated on the dangers of engaging with people online and sharing personal information. You can think of it as an evolved discussion that our parents had with us about using the phone: “Don’t say ‘I’m home alone’, don’t say when mom or dad get home, don’t tell them any information, etc.” Parents Need to Talk Self Worth at Home Katie makes the point better than I ever could (one bad word towards the end): Our children need to understand their value beyond what the latest issue of TigerBeat says, or the media who continues flaunting physical attributes over intelligence and character, or a society that puts focus on status and wealth. They also have to realize that just because someone pays you a compliment, that doesn’t mean you should ignore personal boundaries and limits. What does this have to do with the internet? Well, in days past if you wanted to be social you had to go out somewhere. Now you can video chat with any number of people from the comfort of wherever your laptop happens to be – and not just text but full HD video with sound! While innocent children head online in the hopes of meeting cool people, predators with bad intentions are heading online too. As much as we try to monitor their online activity and be honest about the dangers of the internet, the human side of our kids isn’t something we can control. But we can try to influence them to see themselves as not needing to search out the acceptance of complete strangers online. Way easier said than done, but ensuring self-worth is something discussed, encouraged, and celebrated is a step in the right direction. Parental Wake Up Call This post is not a critique of Amanda’s parents. The reality is that cyber bullying/abuse is happening every day, and there are millions of parents that have no clue its happening to their children. Amanda’s story is a wake up call that our children’s online activities may be putting them in danger. My heart goes out to the parents of this girl. As a father of daughters, I can’t imagine what I would do if I found my daughter having to hide in a ditch to avoid a mob or call 911 to report my daughter had attempted suicide by drinking bleach or deal with a child turning to drugs/alcohol/cutting to cope. It would be horrendous if we as parents didn’t re-evaluate our family internet policies in light of this event. And in the end, Amanda’s video was meant to bring attention to her plight and encourage others going through the same thing. We may not be kids, but we can still honour her memory by helping safeguard our children.

  Read the article

• Blank screen after installing nvidia restricted driver

  - by LaMinifalda

  I have a new machine with a MSI N560GTX Ti Twin Frozr II/OC graphic card and MSI PH67A-C43 (B3) main board. If i install the current nvidia restricted driver and reboot the machine on Natty (64-bit), then i only get a black screen after reboot and my system does not respond. I can´t see the login screen. On nvidia web page i saw that the current driver is 270.41.06. Is that driver used as current driver? Btw, i am an ubuntu/linux beginner and therefore not very familiar with ubuntu. What can i do to solve the black screen problem? EDIT: Setting the nomodeset parameter does not solve the problem. After ubuntu start, first i see the ubuntu logo, then strange pixels and at the end the black screen. HELP! EDIT2: Thank you, but setting the "video=vesa:off gfxpayload=text" parameters do no solve the problem too. Same result as in last edit. HELP. I would like to see Unity. This is my grub: GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="video=vesa:off gfxpayload=text nomodeset quiet splash" GRUB_CMDLINE_LINUX=" vga=794" EDIT3: I dont know if it is important. If this edit is unnecessary and helpless I will delete it. There are some log files (Xorg.0.log - Xorg.4.log). I dont know how these log files relate to each other. Please, check the errors listed below. In Xorg.1.log I see the following error: [ 20.603] (EE) Failed to initialize GLX extension (ComIatible NVIDIA X driver not found) In Xorg.2.log I see the following error: [ 25.971] (II) Loading /usr/lib/xorg/modules/libfb.so [ 25.971] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 [ 25.971] (==) NVIDIA(0): RGB weight 888 [ 25.971] (==) NVIDIA(0): Default visual is TrueColor [ 25.971] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) [ 26.077] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please [ 26.078] (EE) NVIDIA(0): check your system's kernel log for additional error [ 26.078] (EE) NVIDIA(0): messages and refer to Chapter 8: Common Problems in the [ 26.078] (EE) NVIDIA(0): README for additional information. [ 26.078] (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device! [ 26.078] (II) UnloadModule: "nvidia" [ 26.078] (II) Unloading nvidia [ 26.078] (II) UnloadModule: "wfb" [ 26.078] (II) Unloading wfb [ 26.078] (II) UnloadModule: "fb" [ 26.078] (II) Unloading fb [ 26.078] (EE) Screen(s) found, but none have a usable configuration. [ 26.078] Fatal server error: [ 26.078] no screens found [ 26.078] Please consult the The X.Org Found [...] In Xorg.4.log I see the following errors: [ 15.437] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 [ 15.437] (==) NVIDIA(0): RGB weight 888 [ 15.437] (==) NVIDIA(0): Default visual is TrueColor [ 15.437] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) [ 15.703] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 560 Ti (GF114) at PCI:1:0:0 (GPU-0) [ 15.703] (--) NVIDIA(0): Memory: 1048576 kBytes [ 15.703] (--) NVIDIA(0): VideoBIOS: 70.24.11.00.00 [ 15.703] (II) NVIDIA(0): Detected PCI Express Link width: 16X [ 15.703] (--) NVIDIA(0): Interlaced video modes are supported on this GPU [ 15.703] (--) NVIDIA(0): Connected display device(s) on GeForce GTX 560 Ti at [ 15.703] (--) NVIDIA(0): PCI:1:0:0 [ 15.703] (--) NVIDIA(0): none [ 15.706] (EE) NVIDIA(0): No display devices found for this X screen. [ 15.943] (II) UnloadModule: "nvidia" [ 15.943] (II) Unloading nvidia [ 15.943] (II) UnloadModule: "wfb" [ 15.943] (II) Unloading wfb [ 15.943] (II) UnloadModule: "fb" [ 15.943] (II) Unloading fb [ 15.943] (EE) Screen(s) found, but none have a usable configuration. [ 15.943] Fatal server error: [ 15.943] no screens found EDIT4 There was a file /etc/X11/xorg.conf. As fossfreedom suggested I executed sudo mv /etc/X11/xorg.conf /etc/X11/xorg.conf.backup However, there is still the black screen after reboot. EDIT5 Neutro's advice (reinstalling the headers) did not solve the problem, too. :-( Any further help is appreciated! EDIT6 I just installed driver 173.xxx. After reboot the system shows me only "Checking battery state". Just for information. I will google the problem, but help is also appreciated! ;-) EDIT7 When using the free driver (Ubuntu says that the free driver is in use and activated), Xorg.0.log shows the following errors: [ 9.267] (II) LoadModule: "nouveau" [ 9.267] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so [ 9.267] (II) Module nouveau: vendor="X.Org Foundation" [ 9.267] compiled for 1.10.0, module version = 0.0.16 [ 9.267] Module class: X.Org Video Driver [ 9.267] ABI class: X.Org Video Driver, version 10.0 [ 9.267] (II) LoadModule: "nv" [ 9.267] (WW) Warning, couldn't open module nv [ 9.267] (II) UnloadModule: "nv" [ 9.267] (II) Unloading nv [ 9.267] (EE) Failed to load module "nv" (module does not exist, 0) [ 9.267] (II) LoadModule: "vesa" [...] [ 9.399] drmOpenDevice: node name is /dev/dri/card14 [ 9.402] drmOpenDevice: node name is /dev/dri/card15 [ 9.406] (EE) [drm] failed to open device [ 9.406] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 9.406] (WW) Falling back to old probe method for fbdev [ 9.406] (II) Loading sub module "fbdevhw" [ 9.406] (II) LoadModule: "fbdevhw" EDIT8 In the meanwhile i tried to install WIN7 64 bit on my machine. As a result i got a BSOD after installing the nvidia driver. :-) For this reason i sent my new machine back to the hardware reseller. I will inform you as soon as i have a new system. Thank you all for the great help and support. EDIT9 In the meanwhile I have a complete new system with "only" a MSI N460GTX Hawk, but more RAM. The system works perfect. :-) The original N560GTX had a hardware defect. Is is possible to close this question? THX!

  Read the article

• Design Pattern for Complex Data Modeling

  - by Aaron Hayman

  I'm developing a program that has a SQL database as a backing store. As a very broad description, the program itself allows a user to generate records in any number of user-defined tables and make connections between them. As for specs: Any record generated must be able to be connected to any other record in any other user table (excluding itself...the record, not the table). These "connections" are directional, and the list of connections a record has is user ordered. Moreover, a record must "know" of connections made from it to others as well as connections made to it from others. The connections are kind of the point of this program, so there is a strong possibility that the number of connections made is very high, especially if the user is using the software as intended. A record's field can also include aggregate information from it's connections (like obtaining average, sum, etc) that must be updated on change from another record it's connected to. To conserve memory, only relevant information must be loaded at any one time (can't load the entire database in memory at load and go from there). I cannot assume the backing store is local. Right now it is, but eventually this program will include syncing to a remote db. Neither the user tables, connections or records are known at design time as they are user generated. I've spent a lot of time trying to figure out how to design the backing store and the object model to best fit these specs. In my first design attempt on this, I had one object managing all a table's records and connections. I attempted this first because it kept the memory footprint smaller (records and connections were simple dicts), but maintaining aggregate and link information between tables became....onerous (ie...a huge spaghettified mess). Tracing dependencies using this method almost became impossible. Instead, I've settled on a distributed graph model where each record and connection is 'aware' of what's around it by managing it own data and connections to other records. Doing this increases my memory footprint but also let me create a faulting system so connections/records aren't loaded into memory until they're needed. It's also much easier to code: trace dependencies, eliminate cycling recursive updates, etc. My biggest problem is storing/loading the connections. I'm not happy with any of my current solutions/ideas so I wanted to ask and see if anybody else has any ideas of how this should be structured. Connections are fairly simple. They contain: fromRecordID, fromTableID, fromRecordOrder, toRecordID, toTableID, toRecordOrder. Here's what I've come up with so far: Store all the connections in one big table. If I do this, either I load all connections at once (one big db call) or make a call every time a user table is loaded. The big issue here: the size of the connections table has the potential to be huge, and I'm afraid it would slow things down. Store in separate tables all the outgoing connections for each user table. This is probably the worst idea I've had. Now my connections are 'spread out' over multiple tables (one for each user table), which means I have to make a separate DB called to each table (or make a huge join) just to find all the incoming connections for a particular user table. I've avoided making "one big ass table", but I'm not sure the cost is worth it. Store in separate tables all outgoing AND incoming connections for each user table (using a flag to distinguish between incoming vs outgoing). This is the idea I'm leaning towards, but it will essentially double the total DB storage for all the connections (as each connection will be stored in two tables). It also means I have to make sure connection information is kept in sync in both places. This is obviously not ideal but it does mean that when I load a user table, I only need to load one 'connection' table and have all the information I need. This also presents a separate problem, that of connection object creation. Since each user table has a list of all connections, there are two opportunities for a connection object to be made. However, connections objects (designed to facilitate communication between records) should only be created once. This means I'll have to devise a common caching/factory object to make sure only one connection object is made per connection. Does anybody have any ideas of a better way to do this? Once I've committed to a particular design pattern I'm pretty much stuck with it, so I want to make sure I've come up with the best one possible.

  Read the article

• Profiling NetBeans 7.0 Beta 2 and Reporting Problems

  - by christopher.jones

  With NetBeans 7.0 recently going into Beta 2 phase, now is the time to test it out properly and report issues. The development team has been squashing bugs, including memory issues with the PHP bundle.There are some great new PHP related features in NetBeans 7.0, so you know you want to try it out.If you identify something wrong with NetBeans, please report it following the guidelines http://wiki.netbeans.org/IssueReportingGuidelinesDepending on the issues, data to attach to the report is mentioned on: http://wiki.netbeans.org/FaqLogMessagesFile and http://wiki.netbeans.org/FaqProfileMeNowIf you have a memory issue then a memory dump would also be useful. Run the jmap tool for this. There is some background information on http://wiki.netbeans.org/FaqMemoryDump. Here's how I used it.First I set my environment to match the JDK used by NetBeans. In my case I am using a nightly build so the JDK is in the configuration file under $HOME/netbeans-dev-201102210501:$ egrep netbeans_jdkhome $HOME/netbeans-dev-201102210501/etc/netbeans.conf netbeans_jdkhome="/home/cjones/src/jdk1.6.0_24" $ export JAVA_HOME=/home/cjones/src/jdk1.6.0_24 $ export PATH=$JAVA_HOME/bin:$PATH Next, I found the correct process number to examine:$ ps -ef | egrep 'netbeans|jdk'cjones   23230     1  0 16:07 ?        00:00:00 /bin/bash /home/cjones/netbeans-cjones   23438 23230  2 16:07 ?        00:00:09 /home/cjones/src/jdk1.6.0_24/binFinally I used the parent JDK process as the jmap argument:$ jmap -histo:live 23438 num     #instances         #bytes  class name----------------------------------------------   1:         12075        9028656  [I   2:         49535        6581920  <constMethodKlass>   3:         49535        3964128  <methodKlass>   4:         80256        3840776  <symbolKlass>   5:         36093        3635336  [C   6:          5095        3341312  <constantPoolKlass>   7:          5095        2486016  <instanceKlassKlass>   8:          4325        1961432  <constantPoolCacheKlass>   9:         18729        1763976  [B  10:         59952        1438848  java.util.HashMap$Entry  . . .This histogram memory report will help identify the kind of memory issues you are seeing. It may not be as complete as an often tens of megabyte jmap -dump:live,file=/tmp/nbheap.log 23438 heap dump, but is much more easily attached to a bug report.If you want to keep up to date with NetBeans, nightly builds are at: http://bits.netbeans.org/download/trunk/nightly/latest/zip/

  Read the article

• Delphi - Proper way to page though data.

  - by Brad

  I have a string list (TStrings) that has a couple thousand items in it. I need to process them in groups of 100. I basically want to know what the best way to do the loop is in Delphi. I'm hitting a brick wall when I'm trying to figure it out. Thanks unit Unit2; interface uses Windows, Messages, SysUtils, Variants, Classes, Graphics, Controls, Forms, Dialogs, StdCtrls; type TForm2 = class(TForm) Memo1: TMemo; Memo2: TMemo; Button1: TButton; procedure Button1Click(Sender: TObject); private { Private declarations } public { Public declarations } end; var Form2: TForm2; implementation Uses math; {$R *.dfm} procedure TForm2.Button1Click(Sender: TObject); var I:Integer; pages:Integer; str:string; begin pages:= ceil(memo1.Lines.Count/100) ; memo2.Lines.add('Total Pages: '+inttostr(pages)); memo2.Lines.add('Total Items: '+inttostr(memo1.Lines.Count)); // Should just do in batches of 100 VS entire list for I := 0 to memo1.lines.Count - 1 do begin if str '' then str:= str+#10+ memo1.Lines.Strings[i] else str:= memo1.Lines.Strings[i]; end; //I need to stop here every 100 items, then process the items. memo2.Lines.Add(str); end; end. Example form object Form2: TForm2 Left = 0 Top = 0 Caption = 'Form2' ClientHeight = 245 ClientWidth = 527 Color = clBtnFace Font.Charset = DEFAULT_CHARSET Font.Color = clWindowText Font.Height = -11 Font.Name = 'Tahoma' Font.Style = [] OldCreateOrder = False PixelsPerInch = 96 TextHeight = 13 object Memo1: TMemo Left = 16 Top = 8 Width = 209 Height = 175 Lines.Strings = ( '4xlt columbia thunder storm jacket' '5 things about thunder storms' 'a thunder storm with a lot of thunder ' 'and lighting sccreensaver' 'a thunder storm with a lot of thunder ' 'and lighting screensaver with no nag ' 'screens' 'all about thunder storms' 'all about thunderstorms for kids' 'amazing tornado videos and ' 'thunderstorm videos' 'are thunder storms louder in ohio?' 'bad thunder storms' 'bathing in thunder storm' 'best thunderstorm pictures' 'cartoon thunder storms' 'celtic thunder storm' 'central valley thunder storm' 'chicago thunderstorm pictures' 'cool thunderstorm pictures' 'current thunderstorm warnings' 'does thunder storms in december mean ' 'snow will be coming' 'facts about thunderstorms for kids' 'facts on thunderstorms for kids' 'fedex thunderstorm video' 'florida thunderstorms facts' 'free relaxing thunderstorm music' 'free soothing thunderstorm sounds ' 'online' 'free thunderstorm mp3' 'free thunderstorm mp3 download' 'free thunderstorm mp3 downloads' 'free thunderstorm mp3s' 'free thunderstorm music' 'free thunderstorm pictures' 'free thunderstorm sound effects' 'free thunderstorm sounds' 'free thunderstorm sounds cd' 'free thunderstorm sounds mp3' 'free thunderstorm sounds online' 'free thunderstorm soundscape' 'free thunderstorm video' 'free thunderstorm video download' 'free thunderstorm videos' 'god of storm and thunder' 'horses storm thunder rain' 'how do thunder storms form' 'how far away is a thunder storm' 'how long do thunder storms last' 'ice cube in a thunder storm' 'indoor thunderstorm safety tips' 'information about thunderstorms for kids' 'interesting thunderstorm facts' 'is it dangerous to shower during thunder ' 'storm' 'is there frequently thunder during snow ' 'storms' 'isolated thunderstorms' 'it'#39's just a thunder storm baby there is ' 'nothing you should fear lyrics' 'lightning & thunder storm safety' 'lightning and thunderstorm facts' 'lightning and thunderstorms facts' 'lightning and thunderstorms for kids' 'listen to thunderstorm sounds online' 'mississauga thunder storm' 'nature sounds free mp3 thunder storm' 'only about thunderstorms facts' 'original storm deep thunderstick' 'phone use during thunder storms' 'pictures of thunderstorms' 'pocono thunder storm' 'posters of thunder storms' 'power rangers ninja storm' 'power rangers thunder storm' 'power rangers thunder storm cast' 'power rangers thunder storm games' 'power rangers thunder storm morphers' 'power rangers thunder storm part 1' 'power rangers thunder storm part 2' 'power rangers thunderstorm' 'power rangers thunderstorm cannon' 'power rangers thunderstorm deluxe ' 'megazord' 'power rangers thunderstorm games' 'power rangers thunderstorm megazord' 'power rangers thunderstorm part 2' 'power rangers thunderstorm pictures' 'power rnager ninja storm thunder staff' 'powerful thunder and lightning storms' 'precambrian thunder storms' 'rain thunderstorm mp3' 'rain thunderstorm pictures' 'relaxing thunderstorm music' 'reminds me of ohio river thunder lighten ' 'storms' 'sacramento thunder storm' 'safety tips for when your caught in a ' 'thunder storm' 'scattered thunderstorms' 'schemer puts his head in the thunder ' 'storm' 'sedative thunder storm' 'server thunder storms' 'severe supercell thunderstorm pictures' 'severe thunder storm pictures' 'severe thunder storms' 'severe thunderstorm facts' 'severe thunderstorm pictures' 'severe thunderstorm pictures hail' 'severe thunderstorm pictures in alberta' 'severe thunderstorm pictures tornado' 'severe thunderstorm safety' 'severe thunderstorm safety tips' 'severe thunderstorm videos' 'severe thunderstorm warning' 'severe thunderstorm warning los ' 'angeles' 'severe thunderstorm warning signs' 'severe thunderstorm warnings' 'severe thunderstorms' 'severe thunderstorms facts' 'shakespeare use thunder storm for ' 'cosmic disorder julius caesar' 'soothing thunderstorm sounds online' 'sound effects of severe thunder storm' 'sound of rain storm finger snapping ' 'thunder chorus' 'split thunder storm' 'storm 3d thunder power' 'storm dark thunder' 'storm dark thunder bowling ball' 'storm dark thunder bowling ball sale' 'storm dark thunder for sale' 'storm dark thunder pearl' 'storm dark thunder pearl bowling ball' 'storm dark thunder review' 'storm dark thunder shirt' 'storm dark thunderball' 'storm deep thunder' 'storm deep thunder 11' 'storm deep thunder 15' 'storm deep thunder 15 lure' 'storm deep thunder 2' 'storm deep thunder lures' 'storm deep thunderstick' 'storm deep thunderstick crankbaits' 'storm deep thunderstick dts09' 'storm deep thunderstick jr' 'storm deep thunderstick lures' 'storm deep thundersticks' 'storm rolling thunder 3 ball roller' 'storm rolling thunder bowling bag' 'storm rolling thunder three ball bowling ' 'bag' 'storm shallow thunder' 'storm shallow thunder 15' 'storm thunder claw' 'storm thunder craw' 'storm watches thunder' 'storms with constant lightning and ' 'thunder non-stop' 'supercell thunder storms' 'supercell thunderstorm pictures' 'supercell thunderstorms' 'swimming pools thunder storms' 'tampa + lightning strikes + thunder ' 'storms' 'texas thunderstorm pictures' 'texas thunderstorm warnings' 'thunder and lightning storm' 'thunder and lighting storms' 'thunder and lightning storms' 'thunder bay snow storm video' 'thunder storm' 'thunder storm and windmill' 'thunder storm cd' 'thunder storm cloud' 'thunder storm clouds' 'thunder storm dog peppermint oil' 'thunder storm in winter' 'thunder storm in winter and weather ' 'prediction' 'thunder storm lx-3 & road blaster psx ' 'download' 'thunder storm occurances' 'thunder storm photos' 'thunder storm poems' 'thunder storm safety' 'thunder storm sign' 'thunder storm sounds' 'thunder storms' 'thunder storms and deaths' 'thunder storms and ilghting' 'thunder storms and lighting' 'thunder storms cd' 'thunder storms in the arctic arctic ' 'weather' 'thunder storms in winter' 'thunder storms on you tub' 'thunder storms pics' 'thunder storms with rain' 'thunderstorm' 'thunderstorm backgrounds' 'thunderstorm capital' 'thunderstorm capital 2008 dorfman' 'thunderstorm capital in boston' 'thunderstorm capital llc' 'thunderstorm capital of canada' 'thunderstorm capital of the us' 'thunderstorm capital of the world' 'thunderstorm facts' 'thunderstorm facts for kids' 'thunderstorm facts hail' 'thunderstorm facts tornadoes' 'thunderstorm mp3' 'thunderstorm mp3 download' 'thunderstorm mp3 download free' 'thunderstorm mp3 downloads' 'thunderstorm mp3 downloads free' 'thunderstorm mp3 files' 'thunderstorm mp3 free' 'thunderstorm mp3 free download' 'thunderstorm mp3 free downloads' 'thunderstorm mp3 torrent' 'thunderstorm mp3s' 'thunderstorm music' 'thunderstorm music cd' 'thunderstorm music downloads' 'thunderstorm music free' 'thunderstorm music playlists' 'thunderstorm music rain' 'thunderstorm pics' 'thunderstorm pictures' 'thunderstorm pictures for kids' 'thunderstorm safety' 'thunderstorm safety for kids' 'thunderstorm safety precautions' 'thunderstorm safety procedures' 'thunderstorm safety rules' 'thunderstorm safety tips' 'thunderstorm safety tips for kids' 'thunderstorm safety tips shelter' 'thunderstorm safety tips trees' 'thunderstorm sound effects' 'thunderstorm sound effects cd' 'thunderstorm sound effects download' 'thunderstorm sound effects free' 'thunderstorm sound effects free ' 'download' 'thunderstorm sound effects free music ' 'feature audio' 'thunderstorm sound effects mp3' 'thunderstorm sound effects rain' 'thunderstorm sounds' 'thunderstorm sounds cd' 'thunderstorm sounds download' 'thunderstorm sounds for sleep' 'thunderstorm sounds for sleeping' 'thunderstorm sounds free' 'thunderstorm sounds free download' 'thunderstorm sounds free downloads' 'thunderstorm sounds mp3' 'thunderstorm sounds mp3 download' 'thunderstorm sounds mp3 free' 'thunderstorm sounds online' 'thunderstorm sounds online for free' 'thunderstorm sounds online free' 'thunderstorm sounds sleep' 'thunderstorm sounds streaming' 'thunderstorm sounds torrent' 'thunderstorm soundscape' 'thunderstorm soundscapes' 'thunderstorm video' 'thunderstorm video clips' 'thunderstorm video download' 'thunderstorm video downloads' 'thunderstorm videos' 'thunderstorm videos for kids' 'thunderstorm videos lightning' 'thunderstorm videos online' 'thunderstorm wallpaper' 'thunderstorm warning' 'thunderstorm warning brisbane' 'thunderstorm warning definition' 'thunderstorm warning los angeles' 'thunderstorm warning san diego' 'thunderstorm warning san mateo county' 'thunderstorm warning santa barbara' 'thunderstorm warning santa clara' 'thunderstorm warning santa clara ' 'county' 'thunderstorm warning signal' 'thunderstorm warning signs' 'thunderstorm warning vs watch' 'thunderstorm warnings' 'thunderstorm warnings and watches' 'thunderstorm warnings for nj' 'thunderstorm warnings qld' 'thunderstorms' 'thunderstorms facts' 'thunderstorms facts for kids' 'thunderstorms for kids' 'tornados and thunder storms animated' 'understanding thunderstorms for kids' 'watch thunderstorm videos' 'weather underground forecast ' 'thunderstorms' 'what causes thunder storms' 'what is a thunder storm' 'where d thunder storms occur') TabOrder = 0 end object Memo2: TMemo Left = 240 Top = 8 Width = 265 Height = 129 Lines.Strings = ( 'Memo2') TabOrder = 1 end object Button1: TButton Left = 384 Top = 184 Width = 75 Height = 25 Caption = 'Button1' TabOrder = 2 OnClick = Button1Click end end

  Read the article

• Little more help with writing a o buffer with libjpeg

  - by Richard Knop

  So I have managed to find another question discussing how to use the libjpeg to compress an image to jpeg. I have found this code which is supposed to work: Compressing IplImage to JPEG using libjpeg in OpenCV Here's the code (it compiles ok): /* This a custom destination manager for jpeglib that enables the use of memory to memory compression. See IJG documentation for details. */ typedef struct { struct jpeg_destination_mgr pub; /* base class */ JOCTET* buffer; /* buffer start address */ int bufsize; /* size of buffer */ size_t datasize; /* final size of compressed data */ int* outsize; /* user pointer to datasize */ int errcount; /* counts up write errors due to buffer overruns */ } memory_destination_mgr; typedef memory_destination_mgr* mem_dest_ptr; /* ------------------------------------------------------------- */ /* MEMORY DESTINATION INTERFACE METHODS */ /* ------------------------------------------------------------- */ /* This function is called by the library before any data gets written */ METHODDEF(void) init_destination (j_compress_ptr cinfo) { mem_dest_ptr dest = (mem_dest_ptr)cinfo->dest; dest->pub.next_output_byte = dest->buffer; /* set destination buffer */ dest->pub.free_in_buffer = dest->bufsize; /* input buffer size */ dest->datasize = 0; /* reset output size */ dest->errcount = 0; /* reset error count */ } /* This function is called by the library if the buffer fills up I just reset destination pointer and buffer size here. Note that this behavior, while preventing seg faults will lead to invalid output streams as data is over- written. */ METHODDEF(boolean) empty_output_buffer (j_compress_ptr cinfo) { mem_dest_ptr dest = (mem_dest_ptr)cinfo->dest; dest->pub.next_output_byte = dest->buffer; dest->pub.free_in_buffer = dest->bufsize; ++dest->errcount; /* need to increase error count */ return TRUE; } /* Usually the library wants to flush output here. I will calculate output buffer size here. Note that results become incorrect, once empty_output_buffer was called. This situation is notified by errcount. */ METHODDEF(void) term_destination (j_compress_ptr cinfo) { mem_dest_ptr dest = (mem_dest_ptr)cinfo->dest; dest->datasize = dest->bufsize - dest->pub.free_in_buffer; if (dest->outsize) *dest->outsize += (int)dest->datasize; } /* Override the default destination manager initialization provided by jpeglib. Since we want to use memory-to-memory compression, we need to use our own destination manager. */ GLOBAL(void) jpeg_memory_dest (j_compress_ptr cinfo, JOCTET* buffer, int bufsize, int* outsize) { mem_dest_ptr dest; /* first call for this instance - need to setup */ if (cinfo->dest == 0) { cinfo->dest = (struct jpeg_destination_mgr *) (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, sizeof (memory_destination_mgr)); } dest = (mem_dest_ptr) cinfo->dest; dest->bufsize = bufsize; dest->buffer = buffer; dest->outsize = outsize; /* set method callbacks */ dest->pub.init_destination = init_destination; dest->pub.empty_output_buffer = empty_output_buffer; dest->pub.term_destination = term_destination; } /* ------------------------------------------------------------- */ /* MEMORY SOURCE INTERFACE METHODS */ /* ------------------------------------------------------------- */ /* Called before data is read */ METHODDEF(void) init_source (j_decompress_ptr dinfo) { /* nothing to do here, really. I mean. I'm not lazy or something, but... we're actually through here. */ } /* Called if the decoder wants some bytes that we cannot provide... */ METHODDEF(boolean) fill_input_buffer (j_decompress_ptr dinfo) { /* we can't do anything about this. This might happen if the provided buffer is either invalid with regards to its content or just a to small bufsize has been given. */ /* fail. */ return FALSE; } /* From IJG docs: "it's not clear that being smart is worth much trouble" So I save myself some trouble by ignoring this bit. */ METHODDEF(void) skip_input_data (j_decompress_ptr dinfo, INT32 num_bytes) { /* There might be more data to skip than available in buffer. This clearly is an error, so screw this mess. */ if ((size_t)num_bytes > dinfo->src->bytes_in_buffer) { dinfo->src->next_input_byte = 0; /* no buffer byte */ dinfo->src->bytes_in_buffer = 0; /* no input left */ } else { dinfo->src->next_input_byte += num_bytes; dinfo->src->bytes_in_buffer -= num_bytes; } } /* Finished with decompression */ METHODDEF(void) term_source (j_decompress_ptr dinfo) { /* Again. Absolute laziness. Nothing to do here. Boring. */ } GLOBAL(void) jpeg_memory_src (j_decompress_ptr dinfo, unsigned char* buffer, size_t size) { struct jpeg_source_mgr* src; /* first call for this instance - need to setup */ if (dinfo->src == 0) { dinfo->src = (struct jpeg_source_mgr *) (*dinfo->mem->alloc_small) ((j_common_ptr) dinfo, JPOOL_PERMANENT, sizeof (struct jpeg_source_mgr)); } src = dinfo->src; src->next_input_byte = buffer; src->bytes_in_buffer = size; src->init_source = init_source; src->fill_input_buffer = fill_input_buffer; src->skip_input_data = skip_input_data; src->term_source = term_source; /* IJG recommend to use their function - as I don't know **** about how to do better, I follow this recommendation */ src->resync_to_restart = jpeg_resync_to_restart; } All I need to do is replace the jpeg_stdio_dest in my program with this code: int numBytes = 0; //size of jpeg after compression char * storage = new char[150000]; //storage buffer JOCTET *jpgbuff = (JOCTET*)storage; //JOCTET pointer to buffer jpeg_memory_dest(&cinfo,jpgbuff,150000,&numBytes); So I need some help to incorporate the above four lines into this function which now works but writes to a file instead of a memory: int write_jpeg_file( char *filename ) { struct jpeg_compress_struct cinfo; struct jpeg_error_mgr jerr; /* this is a pointer to one row of image data */ JSAMPROW row_pointer[1]; FILE *outfile = fopen( filename, "wb" ); if ( !outfile ) { printf("Error opening output jpeg file %s\n!", filename ); return -1; } cinfo.err = jpeg_std_error( &jerr ); jpeg_create_compress(&cinfo); jpeg_stdio_dest(&cinfo, outfile); /* Setting the parameters of the output file here */ cinfo.image_width = width; cinfo.image_height = height; cinfo.input_components = bytes_per_pixel; cinfo.in_color_space = color_space; /* default compression parameters, we shouldn't be worried about these */ jpeg_set_defaults( &cinfo ); /* Now do the compression .. */ jpeg_start_compress( &cinfo, TRUE ); /* like reading a file, this time write one row at a time */ while( cinfo.next_scanline < cinfo.image_height ) { row_pointer[0] = &raw_image[ cinfo.next_scanline * cinfo.image_width * cinfo.input_components]; jpeg_write_scanlines( &cinfo, row_pointer, 1 ); } /* similar to read file, clean up after we're done compressing */ jpeg_finish_compress( &cinfo ); jpeg_destroy_compress( &cinfo ); fclose( outfile ); /* success code is 1! */ return 1; } Anybody could help me out a bit with it? I've tried meddling with it but I am not sure how to do it. I I just replace this line: jpeg_stdio_dest(&cinfo, outfile); It's not going to work. There is more stuff that needs to be changed a bit in that function and I am being a little lost from all those pointers and memory management.

  Read the article

• CUDA linking error - Visual Express 2008 - nvcc fatal due to (null) configuration file

  - by Josh

  Hi, I've been searching extensively for a possible solution to my error for the past 2 weeks. I have successfully installed the Cuda 64-bit compiler (tools) and SDK as well as the 64-bit version of Visual Studio Express 2008 and Windows 7 SDK with Framework 3.5. I'm using windows XP 64-bit. I have confirmed that VSE is able to compile in 64-bit as I have all of the 64-bit options available to me using the steps on the following website: (since Visual Express does not inherently include the 64-bit packages) http://jenshuebel.wordpress.com/2009/02/12/visual-c-2008-express-edition-and-64-bit-targets/ I have confirmed the 64-bit compile ability since the "x64" is available from the pull-down menu under "Tools-Options-VC++ Directories" and compiling in 64-bit does not result in the entire project being "skipped". I have included all the needed directories for 64-bit cuda tools, 64 SDK and Visual Express (\VC\bin\amd64). Here's the error message I receive when trying to compile in 64-bit: 1>------ Build started: Project: New, Configuration: Release x64 ------ 1>Compiling with CUDA Build Rule... 1>"C:\CUDA\bin64\nvcc.exe" -arch sm_10 -ccbin "C:\Program Files (x86)\Microsoft Visual Studio 9.0\VC\bin" -Xcompiler "/EHsc /W3 /nologo /O2 /Zi /MT " -maxrregcount=32 --compile -o "x64\Release\template.cu.obj" "c:\Documents and Settings\All Users\Application Data\NVIDIA Corporation\NVIDIA GPU Computing SDK\C\src\CUDA_Walkthrough_DeviceKernels\template.cu" 1>nvcc fatal : Visual Studio configuration file '(null)' could not be found for installation at 'C:/Program Files (x86)/Microsoft Visual Studio 9.0/VC/bin/../..' 1>Linking... 1>LINK : fatal error LNK1181: cannot open input file '.\x64\Release\template.cu.obj' 1>Build log was saved at "file://c:\Documents and Settings\Administrator\My Documents\Visual Studio 2008\Projects\New\New\x64\Release\BuildLog.htm" 1>New - 1 error(s), 0 warning(s) ========== Build: 0 succeeded, 1 failed, 0 up-to-date, 0 skipped ========== Here's the simple code I'm trying to compile/run in 64-bit: #include <stdlib.h> #include <stdio.h> #include <string.h> #include <math.h> #include <cuda.h> void mypause () { printf ( "Press [Enter] to continue . . ." ); fflush ( stdout ); getchar(); } __global__ void VecAdd1_Kernel(float* A, float* B, float* C, int N) { int i = blockDim.x*blockIdx.x+threadIdx.x; if (i<N) C[i] = A[i] + B[i]; //result should be a 16x1 array of 250s } __global__ void VecAdd2_Kernel(float* B, float* C, int N) { int i = blockDim.x*blockIdx.x+threadIdx.x; if (i<N) C[i] = C[i] + B[i]; //result should be a 16x1 array of 400s } int main() { int N = 16; float A[16];float B[16]; size_t size = N*sizeof(float); for(int i=0; i<N; i++) { A[i] = 100.0; B[i] = 150.0; } // Allocate input vectors h_A and h_B in host memory float* h_A = (float*)malloc(size); float* h_B = (float*)malloc(size); float* h_C = (float*)malloc(size); //Initialize Input Vectors memset(h_A,0,size);memset(h_B,0,size); h_A = A;h_B = B; printf("SUM = %f\n",A[1]+B[1]); //simple check for initialization //Allocate vectors in device memory float* d_A; cudaMalloc((void**)&d_A,size); float* d_B; cudaMalloc((void**)&d_B,size); float* d_C; cudaMalloc((void**)&d_C,size); //Copy vectors from host memory to device memory cudaMemcpy(d_A,h_A,size,cudaMemcpyHostToDevice); cudaMemcpy(d_B,h_B,size,cudaMemcpyHostToDevice); //Invoke kernel int threadsPerBlock = 256; int blocksPerGrid = (N+threadsPerBlock-1)/threadsPerBlock; VecAdd1(blocksPerGrid, threadsPerBlock,d_A,d_B,d_C,N); VecAdd2(blocksPerGrid, threadsPerBlock,d_B,d_C,N); //Copy results from device memory to host memory //h_C contains the result in host memory cudaMemcpy(h_C,d_C,size,cudaMemcpyDeviceToHost); for(int i=0; i<N; i++) //output result from the kernel "VecAdd" { printf("%f ", h_C[i] ); printf("\n"); } printf("\n"); cudaFree(d_A); cudaFree(d_B); cudaFree(d_C); free(h_A); free(h_B); free(h_C); mypause(); return 0; }

  Read the article

• C# Hook Forms / Windows / Dialogs etc. (via HWND?) to Capture Video Buffer (D3D Device?)

  - by Drax

  I am looking to create a very simple C# application which runs Full-Screen in Direct3D, and is able to grab the Desktop 'scene', mapping each Window from the Desktop to a Textured Polygon in my D3D Scene... I'm hoping to create a simplistic "3D Desktop" type of application as an experiment, and I'm wondering if there is a specific method for doing something like the following: 1)Get a list of all the Windows open on the Desktop (List of HWNDs?). 2)Grab the X,Y position of each Window, as well as the Width and Height. 3)Grab the Rendered image of each Window (magic happens here). 4)Create a new Texture/Surface in D3D using the Width and Height of the Window(s), and apply the Image we grabbed as a Texture. Is there an efficient 'best practice' for acquiring the actual image(s) being rendered to the Desktop? Is there also a 'best practice' for "extending the desktop" to a virtual second, third, etc. "desktop" and being able to swap between them, including creating a unique instance of the task-bar for each virtual desktop. Thanks a million for any suggestions!

  Read the article

• HTML, CSS: how can I merge these divs in order to use float:left property on their children ?

  - by Patrick

  hi, I've 2 sets of thumbnails and in each set I'm displaying them one nearby each other in 4 columns using float:left. I would like to "merge" the 2 sets (but I cannot change the html code) because I want the thumbnails of the second set floating right after the last thumbnail of the first set. In other terms, if in the last row there are only 2 thumbnails and the last 2 columns are empty, the thumbnails of the second set should fill the empty columns of the last row of the first set. This is the code... <div class="field field-type-filefield field-field-image"> <div class="field-items"> <div class="field-item odd"> <a rel="lightbox[field_image][First image&lt;br /&gt;&lt;br /&gt;&lt;a href=&quot;/lancelmaat/content/stalkshow&quot; id=&quot;node_link_text&quot; class=&quot;active&quot;&gt;View Image Details&lt;/a&gt;]" href="http://localhost/lancelmaat/sites/default/files/files/projects/Stalkshow/images/LPrisPetjong.jpeg" class="lightbox-processed"><img width="89" height="89" title="" alt="First image" src="http://localhost/lancelmaat/sites/default/files/imagecache/galleryImage/files/projects/Stalkshow/images/LPrisPetjong.jpeg"></a> </div> <div class="field-item even"> <a rel="lightbox[field_image][Second image&lt;br /&gt;&lt;br /&gt;&lt;a href=&quot;/lancelmaat/content/stalkshow&quot; id=&quot;node_link_text&quot; class=&quot;active&quot;&gt;View Image Details&lt;/a&gt;]" href="http://localhost/lancelmaat/sites/default/files/files/projects/Stalkshow/images/SeoulLEDScreen2a.jpeg" class="lightbox-processed"><img width="89" height="89" title="" alt="Second image" src="http://localhost/lancelmaat/sites/default/files/imagecache/galleryImage/files/projects/Stalkshow/images/SeoulLEDScreen2a.jpeg"></a> </div> <div class="field-item odd"> <a rel="lightbox[field_image][Third image&lt;br /&gt;&lt;br /&gt;&lt;a href=&quot;/lancelmaat/content/stalkshow&quot; id=&quot;node_link_text&quot; class=&quot;active&quot;&gt;View Image Details&lt;/a&gt;]" href="http://localhost/lancelmaat/sites/default/files/files/projects/Stalkshow/images/SeoulSKT6.jpeg" class="lightbox-processed"><img width="89" height="89" title="" alt="Third image" src="http://localhost/lancelmaat/sites/default/files/imagecache/galleryImage/files/projects/Stalkshow/images/SeoulSKT6.jpeg"></a> </div> </div> <!-- second set --> <div class="field field-type-filefield field-field-video"> <div class="field-items"> <div class="field-item odd"> <a rel="lightbox[field_video][Video Number 1&lt;br /&gt;&lt;br /&gt;&lt;a href=&quot;/lancelmaat/content/stalkshow&quot; id=&quot;node_link_text&quot; class=&quot;active&quot;&gt;View Image Details&lt;/a&gt;]" href="http://localhost/lancelmaat/sites/default/files/files/projects/Stalkshow/videos/StalkSeoul8d1Mbps.flv" class="lightbox-processed"><img title="" alt="Video Number 1" src="http://localhost/lancelmaat/sites/default/files/imagecache/galleryVideo/files/projects/Stalkshow/videos/StalkSeoul8d1Mbps.flv"></a> </div> <div class="field-item even"> <a rel="lightbox[field_video][Video Number 2&lt;br /&gt;&lt;br /&gt;&lt;a href=&quot;/lancelmaat/content/stalkshow&quot; id=&quot;node_link_text&quot; class=&quot;active&quot;&gt;View Image Details&lt;/a&gt;]" href="http://localhost/lancelmaat/sites/default/files/files/projects/Stalkshow/videos/stalkshowdvd21Mbps.flv" class="lightbox-processed"><img title="" alt="Video Number 2" src="http://localhost/lancelmaat/sites/default/files/imagecache/galleryVideo/files/projects/Stalkshow/videos/stalkshowdvd21Mbps.flv"></a> </div> <div class="field-item odd"> <a rel="lightbox[field_video][Video Number 3&lt;br /&gt;&lt;br /&gt;&lt;a href=&quot;/lancelmaat/content/stalkshow&quot; id=&quot;node_link_text&quot; class=&quot;active&quot;&gt;View Image Details&lt;/a&gt;]" href="http://localhost/lancelmaat/sites/default/files/files/projects/Stalkshow/videos/StalkShowMoscow1Mbps.flv" class="lightbox-processed"><img title="" alt="Video Number 3" src="http://localhost/lancelmaat/sites/default/files/imagecache/galleryVideo/files/projects/Stalkshow/videos/StalkShowMoscow1Mbps.flv"></a> </div> </div> </div> How can I merge these divs in order to use float:left property on their children ? thanks

  Read the article

• Dell PowerEdge R720xd stuck in BIOS

  - by G_P

  I have a Dell PowerEdge R720xd that gets stuck in the BIOS when booting. It successfully gets past the "configuring memory" and "configuring iDRAC" screens, but once it shows the "CPLD version : 103" with the various management engine versions/patches, it just hangs. No errors messages are displayed. This started happening when we tried adding additional RAM to the machine. Since then, we tried re-seating the new memory which resulted in the same issue. Then, we took out all the new memory, and the problem persists. We have also tried pressing F2 to get into System Setup, but it just indicates "Entering System Setup" and hangs at the same point. Has anybody seen this issue before or have any ideas on what to try next? UPDATE After troubleshooting and trying to isolate the issue (stripping things down to a single CPU and single DIMM, same problem, swapping to the other CPU and a different DIMM, same problem), Dell support will be coming out to swap the system board.

  Read the article

• How can I resolve gstreamer dependencies in Ubuntu

  - by michael

  Hi, Can you please tell me how can I resolve these dependencies on ubuntu: checking for GSTREAMER... configure: error: Package requirements (gstreamer-0.10 >= 0.10 gstreamer-app-0.10 gstreamer-base-0.10 gstreamer-pbutils-0.10 gstreamer-plugins-base-0.10 >= 0.10.25 gstreamer-video-0.10) were not met: No package 'gstreamer-app-0.10' found No package 'gstreamer-pbutils-0.10' found No package 'gstreamer-plugins-base-0.10' found No package 'gstreamer-video-0.10' found I have tried: $ sudo apt-get install *gstreamer-video* Reading package lists... Done Building dependency tree Reading state information... Done E: Regex compilation error - Invalid preceding regular expression $ sudo apt-get install *gstreamer-app* Reading package lists... Done Building dependency tree Reading state information... Done E: Regex compilation error - Invalid preceding regular expression $ sudo apt-get install *gstreamer-base* Reading package lists... Done Building dependency tree Reading state information... Done E: Regex compilation error - Invalid preceding regular expression

  Read the article

• Remote Desktop closes with Fatal Error (Error Code: 5)

  - by Swinders

  We have one PC (Windows XP SP3) that we can not log onto using a Remote Desktop session. Logging on to the PC directly (sitting in front of it using the connected keyboard and monitor) work fine. From a second PC (tried a number of different ones but all Windows XP SP3) I run 'mstsc' and type in PC name to connect to. This shows the login box which we can enter the correct login details and click OK. Within a few second we get an error: Title: Fatal Error (Error Code:5) Error: Your Remote Desktop session is about to end. This computer might be low on virtual memory. Close your other programs, and then try connecting to the remote computer again. If the problem continues, contact your network administrator or technical support. None of the computers we are using are low on memory (2Gb+) and we let windows manage the virtual memory side of things. We do not see this with any other PC and do use Remote Desktop in meeting rooms to connect to user PCs with no problems.

  Read the article

• Windows Media Player - Media library is corrupted

  - by Badr

  Error: "Windows Media Player cannot play the file because the required video codec is not installed on your computer." Solution applied: 1- "http://support.microsoft.com/kb/926373" 2- Media Library is CORRUPTED on Windows 7. "http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/media-library-is-corrupted-on-windows-7/2afcac17-984b-48fe-98fa-451aa5c085e6" 3- "Windows Media Player cannot play the file because the required video codec is not installed on your computer " 4- "Windows Media Player cannot play the file because the required video codec is not installed on your computer." 5- "How to Reset Windows Media Player to default settings." And non of them fixed the problem. Windows 7 Professional 64-bit - Windows media player 11. Any other solution to fix it?

  Read the article

• GeForce 9600GT support for dual monitor setup

  - by Theo

  I have a NVIDIA GeForce 9600 GT (point of view, link) on an Asus M2V-MX motherboard. The card has one DVI, HDMI and S-Video output. The graphics card does not seem to support dual monitors: the driver control panel for the graphics card does not detect a second monitor that is attached via S-Video (which leads me to believe that it doesn't support dual monitors with DVI and the other connections). Would it be possible to use a VGA/DVI splitter to attach two monitors to the single DVI output on the graphics card? Would this allow for a dual monitor setup, or only mirroring? How do I know if the graphic card supports this? With this particular motherboard, would it be possible to use the onboard video for another monitor?

  Read the article

• OOM-Killer, jboss and kernel panic

  - by user32425

  Hi, We are running RedHat 3.4.6(x32) on VMWareEsx3.5(x64) with 6GB RAM. A few java processes(including jboss) are running in the background. The problem is that the java processes consume lots of memory, and sometimes they are killed by the OOM-killer. When OOM-killer is about to act, the free physical memory is very low 100MB-200MB, but the swap is not used (99% free). Sometimes this causes a kernel panic too. So why isn't the swap used? How to investigate this kernel panic? Is using 6GB memory on 32bit Redhat wise? Thanks

  Read the article

• Black Screen when Computer Boots

  - by BlueRaja

  I'm having a serious problem with my computer; I think I've narrowed it down to the motherboard, but I'd like a second opinion before I spend the money. Before I moved into my new apartment, my desktop was working fine; now, it just won't work. It will turn on, the fans will spin up, lights come on... but nothing appears on the screen. No POST, nothing. I've tried: A different monitor (both are VGA) A different video-card (both are DVI, PCIe) Three different, known-good VGA-DVI adapters The onboard video port (VGA) Reseating the memory, and trying only one stick Different, known-good wall-outlets Unplugging the HDD and CD-drive from both the motherboard and PSU Replacing the PSU Has anyone had this happen before? Perhaps it's a known problem with this motherboard? Any advice!? Here are my specs: A13G+ V3.0 motherboard 2 2-gig 800mhz DDR2 600-watt PSU two older Geforce video cards

  Read the article

• How do I use an internal SSD as a scratch disk for FCP X?

  - by andrewb

  I'm contemplating setting up my MacBook Air as a video editing machine. If I do this, I'll upgrade to a 256 GB SSD, and I should be able to keep around 100 GB or more free for video editing. The video files would of course be stored externally, but save purchasing some expensive Thunderbolt RAID device (which I suppose is gradually becoming more of an option), it will be slow for read/writes. How can I have a set up where I take advantage of my SSD's speed for a scratch disk/cache for FCP X, but still have the TB(s) of storage of externals? I don't want to have to be moving files constantly back and forth, this is about saving time not wasting it.

  Read the article

• error: cannot fork() for status: Resource temporarily unavailable (git)

  - by Elnaz Shahmehr

  when I want to do something: add , remove, pull , push in github, I just have this error in my terminal Thanks in advance! selnaz:iOS-Tidinfo Lnaz$ git add . error: cannot fork() for status: Resource temporarily unavailable fatal: Could not run git status --porcelain fatal: git status --porcelain failed fatal: git status --porcelain failed fatal: git status --porcelain failed fatal: git status --porcelain failed fatal: git status --porcelain failed fatal: git status --porcelain failed Edit: selnaz:iOS-Tidinfo Lnaz$ ulimit -a core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited file size (blocks, -f) unlimited max locked memory (kbytes, -l) unlimited max memory size (kbytes, -m) unlimited open files (-n) 256 pipe size (512 bytes, -p) 1 stack size (kbytes, -s) 8192 cpu time (seconds, -t) unlimited max user processes (-u) 709 virtual memory (kbytes, -v) unlimited Edit2 selnaz:iOS-Tidinfo Lnaz$ ps xfu | wc -l ps: illegal option -- f usage: ps [-AaCcEefhjlMmrSTvwXx] [-O fmt | -o fmt] [-G gid[,gid...]] [-u] [-p pid[,pid...]] [-t tty[,tty...]] [-U user[,user...]] ps [-L] 0

  Read the article

• Skype Optimization - Port Forwarding on a Router

  - by user19185

  I was watching this Video which talked about using port-forwarding to optimize your LAN for skype calls. According to the video, as explained in the first couple of minutes in the video, the reason you would need optimization is because if the person your call has a firewall setup, your connection has to go-through a third-party computer to connect to them. I believe I stated this correct (maybe not). None the less, my question is this: do both parties on the call need to enable port forwarding to optimize skype, or just one party (person)?

  Read the article

< Previous Page | 328 329 330 331 332 333 334 335 336 337 338 339  | Next Page >